Replies: 61 comments 523 replies
-
|
Depending on how different your mouse is, you might also have to record a USB session while you change settings in Armoury Crate. This logs all messages that get sent to your device via USB and helps me to understand how armoury Crat changes the settings. It seems the protocol of the various mice are not too different. But they have a few variations here and there which are important for it to function. |
Beta Was this translation helpful? Give feedback.
-
|
:D forgiven. |
Beta Was this translation helpful? Give feedback.
-
|
@seerge Might it be possible to clean up this thread a bit? Like all mice that are already implemented. The reason is that Github seems to really struggle with such long posts that it became a real pain to find posts here and answer to the right one. Oh and yeah. I still lack hardware access to implement keyboards, headphones, controllers and whatever else ASUS sells with RGB. Like.. anything except mice and the Ally. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG given amount of requests, I think it will be a bit easier just to do them as Issues instead :) I have added a new issue template with all info https://github.com/seerge/g-helper/issues/new?assignees=&labels=&projects=&template=peripherals_request.yml And updated header message. Let me know if you have suggestions :) And thanks as usual |
Beta Was this translation helpful? Give feedback.
-
|
@seerge Yeah, that would be even better. We just have to keep track here or somewhere else, which mouse is already supported. I hope I can one day get my hand on other peripherals to support them... People seem to request controllers, headsets and especially keyboards a lot. |
Beta Was this translation helpful? Give feedback.
-
|
I have updated list of supported devices here and on main readme :) (unless I missed something) |
Beta Was this translation helpful? Give feedback.
-
|
ROG Keris Wireless
|
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG is it possible to refresh the mouse tab every time physically change DPI mode so that it displays current DPI mode correctly? eg: to change DPI value to 500,1000,1500,2000 , change DPI 1 to 500 , then physically change to DPI 2 then close the mouse tab and reopen the mouse tab to be able to change value for DPI 2 since mouse page don't refresh after clicking physical DPI button. |
Beta Was this translation helpful? Give feedback.
-
|
No you do not have to do that. You can still click the DPI button and change the DPI for the other settings. You do not have to click the Synchronize mouse button at all. This is more of a "fix" if the mouse does not read correctly. I added a change that you can still cycle through the DPIs in GHelper. They will not change the active profile on the mouse but you can change the different DPIs without having to do some weird dance. |
Beta Was this translation helpful? Give feedback.
-
|
Yea ,this is much more easy and convenient. Thank you. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. I pushed this to GHelper. Will be included in the next release. |
Beta Was this translation helpful? Give feedback.
-
|
I have uploaded updated version over https://github.com/seerge/g-helper/releases/tag/v0.103 |
Beta Was this translation helpful? Give feedback.
-
|
I took a stab at packet sniffing, see section 4 below. 1. MODEL/ VERSIONTUF M4 Wireless 2. SCREENSHOTSHere is a summary of the settings with some additional information that might not be clear from the screenshots, for quick reference:
3. USB TREE VIEW VALUES4. SAMPLE PACKET INFORMATIONI figured I'd take a stab at using the free usb analyzer. I picked a setting that just toggles on and off to keep things simple for myself and checked packets for a single bit flip. If I've got this right, maybe I could save you some busy work and tackle the rest. These are the packets I see getting sent when toggling angle snapping on: When turning angle snapping off, it flips the 01 in column 5 to 00. Each of these is the first of 7 packets that gets sent, but all subsequent packets are identical regardless of whether I'm turning angle snapping on or off. Here are the other 6 for reference: Everything comes through on pipe handle: 0xd7d10c10 (Endpoint Address: 0x4) This is what's sent when directly changing settings; i.e. I haven't looked at what happens when syncing or saving to the mouse's onboard memory. |
Beta Was this translation helpful? Give feedback.
-
|
I've got it showing under peripherals now. It's reporting all my settings accurately; I've also gone through each control and they all seem to work. I've attached the log generated during my messing around. I can also confirm that closing and re-opening the window for mouse control will allow me to see the current DPI setting without manually synchronizing. I see a couple references in the logs to the wrong PID, but it's not causing any problems. log.txt](https://github.com/seerge/g-helper/files/12208246/log.txt) |
Beta Was this translation helpful? Give feedback.
-
|
This looks good. So from the log it seems like your mouse can indeed switch the DPI profiles via software. Armoury just locked that away. The moues confirms the DPI switch and does not error out (unlike the ROG Keris, which does error out). What wrong PIDs do you mean? There are other things in GHelper that work with HID devices, like the keyboard AURA, AnimeMatrix and other stuff. Maybe the logs are from that. |
Beta Was this translation helpful? Give feedback.
-
|
You're completely right sorry - the PID I saw is for the keyboard. This is amazing work Ice - thank you so much for your time and effort (and speed)! |
Beta Was this translation helpful? Give feedback.
-
|
You’re welcome. :) Keep in mind that Armoury Crate will always overwrite all mouse profile when you connect the mouse to a PC with AC running. Ghelper does not store the profiles on your PC but only on the mouse. It edits the onboard profiles directly. |
Beta Was this translation helpful? Give feedback.
-
Sorry a bit off topic, but can we map new keys to mouse buttons ( ROG Keris wireless aim)? |
Beta Was this translation helpful? Give feedback.
-
|
hey hows it going man thats very fantastic of you to be able to add mouse settings in this great app and free us from that armoury crate i have ROG STRIX GLADIUS III WIRELESS but i cant even go in armoury crate to send the things u mention but would be so happy to see it in g-helper thx a lot again i have a G533ZX laptop. |
Beta Was this translation helpful? Give feedback.
-
|
Looks good. Have you also tried to change settings? Does it work? |
Beta Was this translation helpful? Give feedback.
-
|
yeh it does no problem its just when u change dpi with the button thats on the mouse i should close the mouse settings to see if it changed or not but it does its just some visual think and i dont care about some closing and opening again everything else works fine thx |
Beta Was this translation helpful? Give feedback.
-
|
You can also hit "synchronize mouse" to re-read the mouse. You don't have to close the window. Yeah. The moue does not re-read the active profile all the time. |
Beta Was this translation helpful? Give feedback.
-
|
oh yeh that works too anyway thank you so much man u were a big help 👍👍 |
Beta Was this translation helpful? Give feedback.
-
|
You're welcome. I pushed the new mouse profile to the main repository. Will be included in the a release, soon. |
Beta Was this translation helpful? Give feedback.
-
|
ROG STRIX IMPACT II WIRELESS |
Beta Was this translation helpful? Give feedback.
-
Ah yes. The 103 build is from 2 days ago. @seerge maybe you should adjust the description because the Impact II wireless is not supported in that release. |
Beta Was this translation helpful? Give feedback.
-
|
It only includes those: |
Beta Was this translation helpful? Give feedback.
-
|
log.txt |
Beta Was this translation helpful? Give feedback.
-
|
Yeah it is not detected. And I wrote the reason above. The latest public release does not include the mouse yet. You have to use my custom build that I sent you or wait for the release with the latest mouse related changes. |
Beta Was this translation helpful? Give feedback.
-
|
Oh, it is my problem. I misread the introduction. Sorry to bother. |
Beta Was this translation helpful? Give feedback.
-
|
TUF GAMING M3 |
Beta Was this translation helpful? Give feedback.
-
|
Ok. Apparently your mouse maps Reactive to what other mice use for Rainbow. I remapped that for the TUF M3. Please try this build. |
Beta Was this translation helpful? Give feedback.
-
|
Works fine, no more errors! |
Beta Was this translation helpful? Give feedback.
-
|
Alright. Good to hear. I will submit it. |
Beta Was this translation helpful? Give feedback.
-
|
How to assign copy and paste to side buttons? |
Beta Was this translation helpful? Give feedback.
-
Hello TUF Gaming M3 How to assign copy and paste to side buttons? |
Beta Was this translation helpful? Give feedback.
-
|
@seerge As we add more peripherals there will be the point that people want to use GHelper on a non-ASUS laptop just for their peripherals, so they do not have to touch armoury crate. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG lets not rush with this :) i will check what options can still work on non-asus devices |
Beta Was this translation helpful? Give feedback.
-
|
Nah. I didn't intend to rush. Just something to keep in mind as Armoury Crate is hated not only by laptop users :D |
Beta Was this translation helpful? Give feedback.
-
|
Oh yeah thank you very much. I'm in this case, I have a ROG motherboard and a ROG mouse and I would love to use this software instead of AC <3 |
Beta Was this translation helpful? Give feedback.
-
|
asus rog harpe aim lab edition.zip |
Beta Was this translation helpful? Give feedback.
-
|
Alright. My Harpe just arrived. Lets see whether I can make it work or not. I hope ASUS isn't doing some special driver trickery here. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. That should do it. Please try this build with the Omni Receiver. |
Beta Was this translation helpful? Give feedback.
-
|
And ... holy fu**... is that mouse made out of paper? That thing weights nothing. My chakram feels like a giant brick compared to that. |
Beta Was this translation helpful? Give feedback.
-
|
Haha, I know, feels like I'm holding nothing at all, I love it. Also, I just tested the build you put in the other post and it works perfectly. You are a legend. Thanks again! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. Alright, I'm going to push that to the main repo ... and send the mouse back lmao. |
Beta Was this translation helpful? Give feedback.
-
|
Really love the app from @seerge !! Would love to have my mouse integrated inside g-helper! Here are the info. If anything else needed, please tell me. Rog Strix Carry: 
|
Beta Was this translation helpful? Give feedback.
-
|
That is good. I have the carry almost integrated as someone else requested it back when we started with the mouse integration. Please try this build and send me the GHelper log file afterwads. |
Beta Was this translation helpful? Give feedback.
-
|
Hey thanks for the build!!! Sorry I was on vacation. Here is the log file. I can't see anything on the menu but I think you already know that. |
Beta Was this translation helpful? Give feedback.
-
|
Alright, no problem. |
Beta Was this translation helpful? Give feedback.
-
|
Alright I am on this: here is the log file right now: |
Beta Was this translation helpful? Give feedback.
-
|
Haha, too many numbers and letters, probably.. Everything works like a charm now!!! Thank you, once again, for everything! |
Beta Was this translation helpful? Give feedback.
-
|
yes it was always at lowest |
Beta Was this translation helpful? Give feedback.
-
|
Yeah... A lot of binary data. So just to make sure the profile is complete. Could you please test every function in GHelper for this mouse and see whether it works as it should? If it does, I will push the profile to the main repo so it will be included in the next update. |
Beta Was this translation helpful? Give feedback.
-
|
Everything works great, even the battery % when changing batteries. Only for the lift off distance, even though the tick stays selected it doesn't change any behaviour. But I don't think this is your fault. In the armoury crate, as you can see in the original screenshots, it is not available to change. I believe you can push it! Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Yeah. Some mice have endpoints they respond to and store the value, but it does nothing. Maybe it was intended to support it and got scrapped during development. I guess I will remove the Lift-Off distance from the mouse as it seemingly does nothing. Although, the difference is not that large either way. Even on my Chakram, which has the setting, I could barely tell which one is active. Thanks for testing and the usb capture. Will push the mouse profile then. |
Beta Was this translation helpful? Give feedback.
-
Model:ROG Gladius II (P/N: 90MP00R0-B0UA00) AC Settings:Click here to see images
USBDTV: |
Beta Was this translation helpful? Give feedback.
-
|
Oh, I see. So, I'll wait until then. |
Beta Was this translation helpful? Give feedback.
-
|
I'm just afraid it will open pandora-box with lots of people installing it on non asus laptops and starting to complain that none of the function in the app does't work (obviously), as they all depend on ASUS ACPI driver |
Beta Was this translation helpful? Give feedback.
-
What about a warning dialog? The same with the ASUS ACPI where the user can acknowledge that is not a supported device and features are limited or quit the app. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG @seerge Any updates about this topic? (Support without asus laptop) |
Beta Was this translation helpful? Give feedback.
-
|
Replying here since we have the same mice, I also have a ROG Gladius II w/ model P502, have the same screenshots also in AC. Tried @IceStormNG's build of GHelper, only clicking the image below will only give an exception. Log and USB Device Tree Viewer output is also provided below for my case in case there are any differences in usbdtv.
|
Beta Was this translation helpful? Give feedback.
-
Model:
Harpe ACE Aim Lab Edition is a 2.4G wireless mouse, and ROG now update it's usb receover to support a new function that you can use two different supported device by just one receiver. And now the receiver changed it's name to OMNI Receiver, So maybe there are some differents between other mouse. I think their is no need to implement all the function, power indication and performance edit are enough. Azoth is a keyboard with an OLED panel and a control knob. To implement all the function in the armoury create are too difficult I think, so maybe you can just finish the power indication, that's the most useful function. |
Beta Was this translation helpful? Give feedback.
-
|
Hm. Interesting. Then I have to wait for the other user to send me the packet logs to find out how AC connects to that mouse. |
Beta Was this translation helpful? Give feedback.
-
|
@szy854136968 you might want to test this build. I ordered a Harpe Ace for testing purpose and got it working through the receiver. You might want to confirm that it also works for you. |
Beta Was this translation helpful? Give feedback.
-
|
OK，I will test this build later today |
Beta Was this translation helpful? Give feedback.
-
|
I have test this build on my computer and it works perfectly. You are really a legend, thanks for all your efforts! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. I pushed it to the repository and will be included with the next release. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot for your contribution! Here's my request: Model: ROG Keris Wireless Aimpoint Armoury Screenshots
USB Device Tree Log
|
Beta Was this translation helpful? Give feedback.
-
|
Yes, the settings do match and work well at the 2.4Ghz mode. But it seems that the build you provided cannot identify the wired mouse properly. |
Beta Was this translation helpful? Give feedback.
-
|
For the sake of your convenience, I re-collected the USB Device Tree log using wired mode: Log
|
Beta Was this translation helpful? Give feedback.
-
|
Oh... looks like I had a typo in there. Please Try this build: |
Beta Was this translation helpful? Give feedback.
-
|
Great, it works! Thank you for your patience and response! |
Beta Was this translation helpful? Give feedback.
-
|
Maybe at some point. The BT protocol works differently afaik and is limited on some mice compared to the Dongle or wired connection. I might add it at some point but right now, some mice are already challenging enough on its own. |
Beta Was this translation helpful? Give feedback.
-
|
hey man thx for ur all hard works we can use our products as it should be without problem hm sorry but had a question is it possible to see a mouse updates in g-helper in the future would be glad to see but i think it would not be so easy like laptop updates because of the restrictions Asus has but would be glad to see it thx again keep up the good work 👍❤️ |
Beta Was this translation helpful? Give feedback.
-
|
Do you mean firmware updates for the mouse? If so, I prefer to not touch that topic. I actually have a packet capture on how this works, but I prefer not to do that as it is too easy to brick the mouse. Firmware updates for the mouse are also not required if it works and they're rather rare. Otherwise, install AC on a spare PC to run the upgrade (it doesn't seem to work inside a VM, tried that already). Or do you mean something else with "updates"? |
Beta Was this translation helpful? Give feedback.
-
|
Oh I see thx anyway if that's the problem it's best not to add then 😉
…On Wed, 23 Aug 2023, 23:51 IceStormNG, ***@***.***> wrote:
Do you mean firmware updates for the mouse? If so, I prefer to not touch
that topic. I actually have a packet capture on how this works, but I
prefer not to do that as it is too easy to brick the mouse. Firmware
updates for the mouse are also not required if it works and they're rather
rare. Otherwise, install AC on a spare PC to run the upgrade (it doesn't
seem to work inside a VM, tried that already).
Or do you mean something else with "updates"?
—
Reply to this email directly, view it on GitHub
<#900 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BBTEAAVNUY4XZW6T5UZX6T3XWZQ37ANCNFSM6AAAAAA2YPPDRA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, there may be a bug with my GLADIUS III wireless aimpiont. When I connect it wirelessly, Ghelper shows "Wired", but when I connect it wired, Ghelper shows "Wireless". |
Beta Was this translation helpful? Give feedback.
-
|
Please try this build and let me know whether it works correctly now. |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it works correct now. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, It's curious. My Gladius III correctly displays "Wired" when connected with the USB cable. |
Beta Was this translation helpful? Give feedback.
-
|
@Kikimahe is yours regular Gladius III or the Gladius III aimpoint? They're different mice. |
Beta Was this translation helpful? Give feedback.
-
|
Ah yes... I have a regular Gladius III... |
Beta Was this translation helpful? Give feedback.
-
|
I have an ASUS ROG Gladius III mouse, but it does not appear in the program. :( What could be the problem? (Excuse the Hungarian language.)
|
Beta Was this translation helpful? Give feedback.
-
|
Please try this build and see whether all the settings work as they should. |
Beta Was this translation helpful? Give feedback.
-
|
It already appears, but it says "Not connected" and when I click on it, nothing happens. 😕
|
Beta Was this translation helpful? Give feedback.
-
|
Hm. Oh. I guess I found the reason why. This should do it: |
Beta Was this translation helpful? Give feedback.
-
|
Ahhhhh, it works perfectly!!! 👍 Thank you! 🥰
|
Beta Was this translation helpful? Give feedback.
-
|
Alright. I will push this to master then an upcoming update of GHelper will include the mouse profile for this one. |
Beta Was this translation helpful? Give feedback.
-
|
I noticed that Armoury Crate Gear can recognize my ROG Harpe Ace Aim Lab Edition mouse and edit its settings through Bluetooth connection. Can Ghelper do that? |
Beta Was this translation helpful? Give feedback.
-
|
There is no BT support yet, as I haven't put any research into that yet, and likely won't in the near future. The Problem with BT is that most mice are very limited in that mode, either by polling rate or by the features they support. |
Beta Was this translation helpful? Give feedback.
-
ASUS P519
=========================== USB Port1 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 2-2-1
Properties : 0x01
IsUserConnectable : yes
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no
ConnectionIndex : 0x01 (Port 1)
CompanionIndex : 0
CompanionHubSymLnk : USB#VID_05E3&PID_0626#6&4420b4e&0&7#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
CompanionPortNumber : 0x01 (Port 1)
-> CompanionPortChain : 2-7-1
========================== Summary =========================
Vendor ID : 0x0B05 (ASUSTek Computer Inc.)
Product ID : 0x1AF3
USB Version : 2.0 -> but Device is Full-Speed only
Port maximum Speed : High-Speed (Companion Port 2-7-1 is doing the SuperSpeed)
Device maximum Speed : Full-Speed
Device Connection Speed : Full-Speed
Self powered : yes
Demanded Current : 500 mA
Used Endpoints : 5
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB Composite Device
Device Path : \\?\USB#VID_0B05&PID_1AF3#RBMPMV027056hY#{a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Kernel Name : \Device\USBPDO-9
Device ID : USB\VID_0B05&PID_1AF3\RBMPMV027056HY
Hardware IDs : USB\VID_0B05&PID_1AF3&REV_0113 USB\VID_0B05&PID_1AF3
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0014 (GUID_DEVCLASS_USB)
Driver : \SystemRoot\System32\drivers\usbccgp.sys (Version: 10.0.26100.560 Date: 2024-06-26 Company: Microsoft Corporation)
Driver Inf : C:\WINDOWS\inf\usb.inf
Legacy BusType : PNPBus
Class : USB
Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
Service : usbccgp
Enumerator : USB
Location Info : Port_#0001.Hub_#0006
Address : 1
Location IDs : PCIROOT(0)#PCI(0801)#PCI(0003)#USBROOT(0)#USB(2)#USB(1), ACPI(_SB_)#ACPI(PCI0)#ACPI(GP17)#ACPI(XHC0)#ACPI(RHUB)#ACPI(PRT2)#USB(1)
Container ID : {2e213757-94e7-550b-8be6-45cf2d413bc3}
Manufacturer Info : (标准 USB 主控制器)
Capabilities : 0x94 (Removable, UniqueID, SurpriseRemovalOK)
Status : 0x0180400A (DN_DRIVER_LOADED, DN_STARTED, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
Address : 1
EnhancedPowerMgmtEnabled : 0
Power State : D0 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
+++++++++++++++++ Registry USB Flags +++++++++++++++++
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0B051AF30113
osvc : REG_BINARY 00 00
NewInterfaceUsage : REG_DWORD 00000000 (0)
---------------- Connection Information ---------------
Connection Index : 0x01 (Port 1)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01 (Configuration 1)
Device Address : 0x06 (6)
Is Hub : 0x00 (no)
Device Bus Speed : 0x01 (Full-Speed)
Number of open Pipes : 0x04 (4 pipes to data endpoints)
Pipe[0] : EndpointID=1 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[1] : EndpointID=1 Direction=OUT ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[2] : EndpointID=2 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[3] : EndpointID=3 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Data (HexDump) : 01 00 00 00 12 01 00 02 00 00 00 40 05 0B F3 1A ...........@....
13 01 01 02 03 01 01 01 00 06 00 04 00 00 00 01 ................
00 00 00 07 05 81 03 40 00 01 00 00 00 00 07 05 .......@........
01 03 40 00 01 00 00 00 00 07 05 82 03 40 00 01 ..@..........@..
00 00 00 00 07 05 83 03 40 00 01 00 00 00 00 ........@......
--------------- Connection Information V2 -------------
Connection Index : 0x01 (1)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes, port supports USB 1.1)
Usb200 : 1 (yes, port supports USB 2.0)
Usb300 : 0 (no, port not supports USB 3.0) -> but Companion Port 2-7-1 does
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Device is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Device is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Device is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Device is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00
Data (HexDump) : 01 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.0) -> but device is Full-Speed only
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0x0B05 (ASUSTek Computer Inc.)
idProduct : 0x1AF3
bcdDevice : 0x0113
iManufacturer : 0x01 (String Descriptor 1)
Language 0x0409 : "ASUSTeK"
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
iSerialNumber : 0x03 (String Descriptor 3)
Language 0x0409 : "RBMPMV027056hY"
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 40 05 0B F3 1A 13 01 01 02 .......@........
03 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x005B (91 bytes)
bNumInterfaces : 0x03 (3 Interfaces)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x04 (String Descriptor 4)
Language 0x0409 : "Default configuration"
bmAttributes : 0xE0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x01 (yes)
D5: Remote Wakeup : 0x01 (yes)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0xFA (500 mA)
Data (HexDump) : 09 02 5B 00 03 01 04 E0 FA 09 04 00 00 02 03 00 ..[.............
00 00 09 21 11 01 00 01 22 22 00 07 05 81 03 40 ...!...."".....@
00 01 07 05 01 03 40 00 01 09 04 01 00 01 03 01 ......@.........
02 00 09 21 11 01 00 01 22 52 00 07 05 82 03 40 ...!...."R.....@
00 01 09 04 02 00 01 03 00 00 00 09 21 11 01 00 ............!...
01 22 88 00 07 05 83 03 40 00 01 ."......@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00 (Interface 0)
bAlternateSetting : 0x00
bNumEndpoints : 0x02 (2 Endpoints)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 02 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 22 00 .!...."".
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0022 (34 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 81 03 40 00 01 ....@..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x01 (Direction=OUT EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 01 03 40 00 01 ....@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x01 (Interface 1)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x01 (Boot Interface)
bInterfaceProtocol : 0x02 (Mouse)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 01 00 01 03 01 02 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 52 00 .!...."R.
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0052 (82 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x82 (Direction=IN EndpointID=2)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 82 03 40 00 01 ....@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x02 (Interface 2)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 02 00 01 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 88 00 .!...."..
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0088 (136 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x83 (Direction=IN EndpointID=3)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 83 03 40 00 01 ....@..
----------------- Device Qualifier Descriptor -----------------
Error : ERROR_GEN_FAILURE (because the device is Full-Speed only)
-------------------- String Descriptors -------------------
------ String Descriptor 0 ------
bLength : 0x04 (4 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language ID[0] : 0x0409 (English - United States)
Data (HexDump) : 04 03 09 04 ....
------ String Descriptor 1 ------
bLength : 0x10 (16 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUSTeK"
Data (HexDump) : 10 03 41 00 53 00 55 00 53 00 54 00 65 00 4B 00 ..A.S.U.S.T.e.K.
------ String Descriptor 2 ------
bLength : 0x34 (52 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
Data (HexDump) : 34 03 41 00 53 00 55 00 53 00 20 00 54 00 58 00 4.A.S.U.S. .T.X.
20 00 47 00 41 00 4D 00 49 00 4E 00 47 00 20 00 .G.A.M.I.N.G. .
4D 00 4F 00 55 00 53 00 45 00 20 00 4D 00 49 00 M.O.U.S.E. .M.I.
4E 00 49 00 N.I.
------ String Descriptor 3 ------
bLength : 0x1E (30 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "RBMPMV027056hY"
Data (HexDump) : 1E 03 52 00 42 00 4D 00 50 00 4D 00 56 00 30 00 ..R.B.M.P.M.V.0.
32 00 37 00 30 00 35 00 36 00 68 00 59 00 2.7.0.5.6.h.Y.
------ String Descriptor 4 ------
bLength : 0x2C (44 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "Default configuration"
Data (HexDump) : 2C 03 44 00 65 00 66 00 61 00 75 00 6C 00 74 00 ,.D.e.f.a.u.l.t.
20 00 63 00 6F 00 6E 00 66 00 69 00 67 00 75 00 .c.o.n.f.i.g.u.
72 00 61 00 74 00 69 00 6F 00 6E 00 r.a.t.i.o.n.
|
Beta Was this translation helpful? Give feedback.
-
|
This build works very well, thank you for your work. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. I will push the mouse profile and it will be available in one of the next updates |
Beta Was this translation helpful? Give feedback.
-
|
I use this mouse TX Gaming Mini (p519), and there is a bug in the latest version of G-Helper (0.240.0). The dpi displayed in AC and GHelper are different. I set it to 1200 in AC, but when I open GHelper, it shows 2400. If I uninstall AC and debug the dpi to 1200 in GHelper, there will be a bug that GHelper shows 1200, but it is actually very fast (actually at least around 2400). It shows that every time I start the computer, I have to wait for AC and GHelper to start, and AC will overwrite the GHelper settings. During this period, when I move the mouse, there will be obvious dpi instability. |
Beta Was this translation helpful? Give feedback.
-
|
I tested it repeatedly, the dpi displayed in GHelper is exactly twice that in AC, the 2400 in GH is actually 1200, which is correct in AC |
Beta Was this translation helpful? Give feedback.
-
@IceStormNG Same this |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
It's not supported yet, but we can add it if you give us the necessary info and do the testing. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
This is a known limitation as it uses the Omni Receiver. Right now, only the Harpe Ace works with the Omni receiver. It will take some time for me to get some of those Omni Mice here and find out how to detect which is which behind the receiver. |
Beta Was this translation helpful? Give feedback.
-
|
i want to ask it taht possible i can change the shortcut for the function key, like the side button of mouse |
Beta Was this translation helpful? Give feedback.
-
|
I just received my Harpe Ace Mini. Can I do something / run something to help you get support for it? |
Beta Was this translation helpful? Give feedback.
-
|
G helper cant find keris ii ace after putting pollingrate booster once. I know it doesnt work through omni reciever. But it doesnt work via wire too. how can i solve this? Edit ) Device manager got brand new Keris II Ace/Omni receiver 'Keyboard' driver after putting via 8k pollingrate booster. I guess it might affect recognizing |
Beta Was this translation helpful? Give feedback.
-
|
This works well on my Zenbook S13 OLED (Ryzen 6800U). Commenting since I could not see that in the list. |
Beta Was this translation helpful? Give feedback.
-
|
What about the rog clavis? |
Beta Was this translation helpful? Give feedback.
-
|
No Gladius 2 CORE? P507 |
Beta Was this translation helpful? Give feedback.
-
|
No ROG Falchion Ace keyboard? |
Beta Was this translation helpful? Give feedback.
-
ROG Strix Scope II 96 Wireless – Feature RequestFirst and foremost, thank you for your continued work on this project! I would love it if support for the ROG Strix Scope II 96 Wireless keyboard could be added. The reciever seems to show up in GHelper, but cannot be enabled. The dumps for the USB reciever and keyboard connected via USB-C are below. This is all pretty new to me so LLMs handled the heavy lifting. I attempted to organize the USB Tree (and uploaded a Wireshark pcapng file in zip) the best I could, but if there are any better ways to share the data please let me know! Device Information
Hardware IDs
Technical SummaryWired (USB-C) - PID
|
Beta Was this translation helpful? Give feedback.
-
|
Hello, i cant set my mice DPI ROG STRIX IMPACT, can you help me? |
Beta Was this translation helpful? Give feedback.
-
|
@roca55035 what exactly do you mean under "i can't set" ? |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for not being more specific, so, i set a DPI at 2000, and i do click on other part of the toggle and sudenly the DPI goes under 750, so i can save a DPI configuration. |
Beta Was this translation helpful? Give feedback.
-
|
@roca55035 most likely your mouse just doesn't support reporting actually active setting, after all it's like 8(!) years old . Does actual movement speed change when you change DPI ? |
Beta Was this translation helpful? Give feedback.
and others
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello fellow community,
Since recent update G-Helper can control your external Asus Mouse and possibly other peripherals.
Thanks again to @IceStormNG 👑 for contribution and research (!).
SUBMIT NEW REQUESTS HERE
Currently supported models
ROG Chakram X
ROG Chakram Core
ROG Gladius II and Gladius II Origin
ROG Gladius II Wireless
ROG Gladius III
ROG Gladius III Wireless
ROG Harpe Ace Aim Lab Edition
ROG Harpe Ace Mini
ROG Keris Wireless
ROG Keris II Ace
ROG Keris Wireless Aimpoint
ROG Strix Carry
ROG Strix III Gladius III Aimpoint Wireless
ROG Strix Impact III
ROG Strix Impact III Wireless
ROG Spatha X
ROG Strix Impact II Wireless
ROG Pugio
ROG Pugio II
TUF Gaming M4 Wireless
TUF Gaming M3
TUF Gaming M3 Gen II
TUF Gaming M4 AIR
TUF Gaming M5
TX Gaming Mini
Beta Was this translation helpful? Give feedback.
All reactions