Bad FPS

[ImOniKaze]

Hi,I have a Zephyrus G16 Intel Ultra 9 4070. So I recently switched from Armoury Crate and I’m experiencing bad fps. I mainly play Marvel Rivals. I used to get 150-170 Fps in performance mode while I had Armoury Crate. Now I’m getting below 100 and really laggy when in Balanced CPU and Standard GPU mode. I’m getting 140 something in Turbo mode but in my understanding isn’t Performance mode in AC equivalent to standard mode In Ghelper? Would really appreciate if someone could help out.

[seerge]

@ImOniKaze hello,

All default modes are baked into firmware, so they are same no matter where you select them, in AC or G-Helper. If you get different performance - it means something else is changed either in the app or in windows / drivers.

• Can you please upload log from %appdata%\GHelper ?
• Do you have Energy Saver enabled in windows tray menu ? If so - turn it OFF.
• Make sure you your Nvidia Optimus is working correctly. Check Nvidia Control Panel -> Display Mode, should be either Auto or even Nvidia GPU only.
• If you use Balanced (or Turbo) mode, open Fans + Power and click Factory Defaults there
• Did you disable CPU boost ? enable it back again under same Fans + Power
• If it doesn't help - try to set Fans + Power -> Power Mode to High Performance to see if makes a difference

Thanks

[ImOniKaze]

@ImOniKaze hello,

All default modes are baked into firmware, so they are same no matter where you select them, in AC or G-Helper. If you get different performance - it means something else is changed either in the app or in windows / drivers.

• Can you please upload log from %appdata%\GHelper ?
• Do you have Energy Saver enabled in windows tray menu ? If so - turn it OFF.
• Make sure you your Nvidia Optimus is working correctly. Check Nvidia Control Panel -> Display Mode, should be either Auto or even Nvidia GPU only.
• If you use Balanced (or Turbo) mode, open Fans + Power and click Factory Defaults there
• Did you disable CPU boost ? enable it back again under same Fans + Power
• If it doesn't help - try to set Fans + Power -> Power Mode to High Performance to see if makes a difference

Thanks

Heyy where

[ImOniKaze]

@ImOniKaze hello,
All default modes are baked into firmware, so they are same no matter where you select them, in AC or G-Helper. If you get different performance - it means something else is changed either in the app or in windows / drivers.

• Can you please upload log from %appdata%\GHelper ?
• Do you have Energy Saver enabled in windows tray menu ? If so - turn it OFF.
• Make sure you your Nvidia Optimus is working correctly. Check Nvidia Control Panel -> Display Mode, should be either Auto or even Nvidia GPU only.
• If you use Balanced (or Turbo) mode, open Fans + Power and click Factory Defaults there
• Did you disable CPU boost ? enable it back again under same Fans + Power
• If it doesn't help - try to set Fans + Power -> Power Mode to High Performance to see if makes a difference

Thanks

Heyy where

Hii where do I find the appdata

[seerge]

@ImOniKaze `%appdata%\Ghelper’ - you just open this folder by copying it into explorer address bar.

Did you try other things I listed?

[seerge]

@ImOniKaze any updates here ?

[seerge]

Closed as abandoned