I am new to opentrack, not sure how to setup

[masterchop]

Hi, sorry for the noob question but we dont have a guide, i just found out of opentrack and no idea how to add this to it. I have both kinects to test and i think it would be awesome if we could use both or atleast 2 v2 for a better tracking.

[sheepsskullcity]

Kinect SDK doesn't track skeletons from multiple kinects.

Latest opentrack-2.3.0-rc11 have bug with udp sender tracker.
Try this opentrack build with modified limit of 300 units (3m) LINK.

Instructions:

• Install MS KINECT SDK V1.8 for kinect v1 or MS KINECT SDK V2 for kinect v2.
• Power up your Kinect (it's should be parallel with the floor) and connect it to a usb port.
• Run opentrackkinect.jar , press center button and stand in center of play area (it will sets x y z offsets after 5 sec delay).
• Run OpenTrack.
• Select 'UDP sender' as input and set there 4242 port in Opentrack.
• Select 'Freetrack 2.0' as output in Opentrack.
• Invert/replace x z axis in Opentrack or center view in Riftcat.
• Set VRidge to use phone orientation and FreeTrack position.

[masterchop]

sorry for the noob question but i dont have opentrackkinect,jar which i assume its this project but not sure how to compile it, its not importing succesfully in netbeans.

[ajayyy]

Go to the releases tab

[masterchop]

Its working, Thank you guys for this plugin.

[HybridZach]

Okay so I got it working, but when I moved the kinect and recalibrated it using the JAR it now doesnt show up and move the octopus in Opentrack? it seemed to take a while to connect first time, is it a case of waiting ?

[masterchop]

Can you chexk if the same situación happen with offical kinect tools? It could be a resources issue

[masterchop]

Can you chexk if the same situación happen with offical kinect tools? It could be a resources issue

[HybridZach]

It detects me after I move around alot. I should say Im sitting down not standing and the kinect is quite close to me. It eventually detects me as I move around and flail my arms a bit. However I will check the kinect tools because It did say insufficient bandwidth earlier in the kinect explorer. I unpluged one USB and it resolved it. I am assuming its either I am too close | not moving around enough for it to detect me in the JAR, or too much usb ports are in use? It detects me fine like I said if I move around a bit.

[masterchop]

Yes, that could be the issue, try unplugging all but Kinect.

[Zebrone1]

Hi, i'm trying to configure opentrack with kinect, but when i start the .jar the kinect startup but no information are showed.

[ajayyy]

@Zebrone1 Try opening it with:

java -jar [filename] in a terminal to get error logs.