Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Fuel Burnup rate displaying improperly? #5

Open
fatalberba opened this issue Jan 25, 2016 · 4 comments
Open

Fuel Burnup rate displaying improperly? #5

fatalberba opened this issue Jan 25, 2016 · 4 comments

Comments

@fatalberba
Copy link

While attempting to find out the stats for a 5X5X5 reactor, I decided to do an in game test just for accuracy sake. When comparing the EXACT same configuration from in-game and on the simulator, all the stats but one were pretty much spot on. For some reason the fuel burn-up rate in the simulator is about 7% accurate.
Here's a screenshot of the control panel in game: http://puu.sh/mIBd5/268046dfef.jpg
Here's a screenshot of the reactor simulator: http://puu.sh/mIBdd/5c6f2742f6.png

These were both configured with exactly the same parameters. The reactor was 5X5X5, control rod insertion was 0, the rod configuration was exactly the same in both, and the cryotheum was filled in the reactor exactly the same.

Am i doing something wrong, or is there some option that i need to change in the panel?

@sidoh
Copy link
Owner

sidoh commented Jan 25, 2016

It probably has to do with how the simulator handles waste. It ejects waste on each tick, but in-game reactors can only flush when there's at least 1,000mb of waste to eject.

#2 is probably related.

@patrix87
Copy link

I've tested with many settings and is seams to be about 10 to 12 times too low in the simulator vs in game

@sidoh
Copy link
Owner

sidoh commented Aug 21, 2016

What seems too low? The power output? Many packs change the fuel consumption and power output multipliers of BR. If the multiplier is consistent across many layouts, that's probably what's going on.

@patrix87
Copy link

Oh good to know, that's probably what is going on.

I was using FTB : Infinity Evolved

the power output is fine, only the burn up rate is higher in game.

Thanks

On Aug 21, 2016 10:38, "Chris Mullins" [email protected] wrote:

What seems too low? The power output? Many packs change the fuel
consumption and power output multipliers of BR. If the multiplier is
consistent across many layouts, that's probably what's going on.


You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#5 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/ACC49i6boGgT_FGzYZfJ2mf7qon6Pou-ks5qiGLggaJpZM4HLUBy
.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants