Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

+12V supply to top half of Dalek #15

Open
benjie opened this issue Jul 28, 2014 · 4 comments
Open

+12V supply to top half of Dalek #15

benjie opened this issue Jul 28, 2014 · 4 comments

Comments

@benjie
Copy link
Member

benjie commented Jul 28, 2014

Would be nice to run the top half of the Dalek (AV stuff) off of the 12V switch mode regulator @Chris3DSmith acquired; and is desirable to have the connector for this near to the back of the Dalek so it's easily accessible.
@benjie
Copy link
Member Author

benjie commented Jul 28, 2014

If we were to have a 24V supply from the batteries plug into a socket in the skirt then the 12V regulator could be affixed inside the skirt and run the skirt LEDs, skirt cigarette lighter sockets and can pass 12V to the AV section and the full 24V could still be wired later if necessary e.g. to power the turret motors.

@brackendawson
Copy link
Member

The regulator we got is not usable, we took it out the case and parts fell off...

@benjie
Copy link
Member Author

benjie commented Jul 30, 2014

Huh?!

@XRobots
Copy link

XRobots commented Jul 30, 2014

It was soldered by Stevie Wonder

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@benjie @brackendawson @XRobots