Emergency limit

[JensHauser]

I´m interested to set the emergency limits (e.g. max. unloading down to 2kWh) in my S10X.

Couldn´t get it done so far.
In this and other forums I found hints in relation to this subject, maybe helpful?

• TAG_SE_REQ_EP_RESERVE 0x1B000009
• TAG_SE_EP_RESERVE 0x1B800009
• EMS_REQ_SET_EMERGENCY_POWER Tag = 0x01000074
• EMS_SET_EMERGENCY_POWER = 0x01800074
• ISE_HM_SEND_EMERGENCY_POWER_SIZE
• TAG_EMS_ISE_EMERGENCY_POWER_SIZE
• "TagName": "REQ_SET_EMERGENCY_POWER", "TagNameGlobal": "TAG_EMS_REQ_SET_EMERGENCY_POWER",
• "TagName": "SET_EMERGENCY_POWER", "TagNameGlobal": "TAG_EMS_SET_EMERGENCY_POWER",

None of them work for me in that way:
./e3dc '[["TAG_EMS_ISE_EMERGENCY_POWER_SIZE"]]'
--> error: TAG_EMS_ISE_EP_SIZE does not belong to Tag values

Also found a list of tags from the E3DC website which might be related to emergency power

• EMS_REQ_EP_RESERVE
• EMS_REQ_SET_TOTAL_EP_RESERVE_W
• EMS_EP_RESERVE
• EMS_PARAM_FULL_CHARGED_ENERGY_EP_RESERVE
• EMS_PARAM_CURR_CHARGED_ENERGY_EP_RESERVE
• EMS_SET_TOTAL_EP_RESERVE_W
• SE_REQ_EP_RESERVE
• SE_REQ_SET_EP_RESERVE
• SE_PARAM_EP_RESERVE
• SE_PARAM_EP_RESERVE_MAX_W
• SE_PARAM_EP_RESERVE_W
• SE_EP_RESERVE

As I´m quite new in using this cool tool, maybe somehow has an advice?

[hmichels]

Hello!
With discussion #45 I've the same wish to use/set the emergency values on my S10X 😉.

The problem is that the necessary tags (listed above) - and maybe the correct using of these tags in the correct form (container) - are not defined in the current rscp library.
Unfortunately, I have no idea whether we can simply include the tags in the source code or not. However, the project still needs to be recompiled to create a new library.

We can only hope that Spali will help us here.