esp32ble2.yml

substitutions:
  domain: !secret domain
  ap_ssid: !secret ap_ssid
  hostname: esp32ble2

esphome:
  name: ${hostname} 
  platform: ESP32
#  board: nodemcu-32s
#  board: az-delivery-devkit-v4
  board: esp32dev

wifi:
  ssid: !secret wifi_ssid 
  password: !secret wifi_password
  use_address: ${hostname}.${domain}

  manual_ip:
    static_ip: !secret esp32ble2_ip
    gateway: !secret ip_gateway 
    subnet: 255.255.255.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: ${ap_ssid}.{hostname}
    password: !secret ap_password

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
#api:
#  password: !secret api_password

ota:
  password: !secret ota_password

esp32_ble_tracker:

#exposure_notifications:
#  on_exposure_notification:
#    then:
#      - lambda: |
#          ESP_LOGD("main", "Got notification:");
#          ESP_LOGD("main", "  RPI: %s", hexencode(x.rolling_proximity_identifier).c_str());
#          ESP_LOGD("main", "  RSSI: %d", x.rssi);

sensor:
  - platform: uptime
    name: Uptime Sensor
    id: uptime_sensor

  - platform: ruuvitag
    mac_address: ff:d3:e4:94:9a:c2
    humidity:
      name: "Balkon Humidity"
    temperature:
      name: "Balkon Temperature"
      id: ruuvi_balkon_temp
    pressure:
      name: "Balkon Pressure"
#    acceleration:
#      name: "Balkon Acceleration"
#    acceleration_x:
#      name: "Balkon Acceleration X"
#    acceleration_y:
#      name: "Balkon Acceleration Y"
#    acceleration_z:
#      name: "Balkon Acceleration Z"
    battery_voltage:
      name: "Balkon Battery Voltage"
    tx_power:
      name: "Balkon TX Power"
#    movement_counter:
#      name: "Balkon Movement Counter"
#    measurement_sequence_number:
#      name: "Balkon Measurement Sequence Number"

  - platform: ruuvitag
    mac_address: f1:5f:fe:e0:a0:d0
    humidity:
      name: "Kuehlschrank Humidity"
    temperature:
      name: "Kuehlschrank Temperature"
    pressure:
      name: "Kuehlschrank Pressure"
#    acceleration:
#      name: "Kuehlschrank Acceleration"
#    acceleration_x:
#      name: "Kuehlschrank Acceleration X"
#    acceleration_y:
#      name: "Kuehlschrank Acceleration Y"
#    acceleration_z:
#      name: "Kuehlschrank Acceleration Z"
    battery_voltage:
      name: "Kuehlschrank Battery Voltage"
    tx_power:
      name: "Kuehlschrank TX Power"
#    movement_counter:
#      name: "Kuehlschrank Movement Counter"
#    measurement_sequence_number:
#      name: "Kuehlschrank Measurement Sequence Number"

  - platform: ruuvitag
    mac_address: f1:52:a4:8a:61:d0
    humidity:
      name: "Eingang Humidity"
    temperature:
      name: "Eingang Temperature"
    pressure:
      name: "Eingang Pressure"
#    acceleration:
#      name: "Eingang Acceleration"
#    acceleration_x:
#      name: "Eingang Acceleration X"
#    acceleration_y:
#      name: "Eingang Acceleration Y"
#    acceleration_z:
#      name: "Eingang Acceleration Z"
    battery_voltage:
      name: "Eingang Battery Voltage"
    tx_power:
      name: "Eingang TX Power"
#    movement_counter:
#      name: "Eingang Movement Counter"
#    measurement_sequence_number:
#      name: "Eingang Measurement Sequence Number"

  - platform: xiaomi_hhccjcy01
    mac_address: 'C4:7C:8D:6B:92:46'
    temperature:
      name: "XBPS1 Temperature"
    moisture:
      name: "XBPS1 Moisture"
    illuminance:
      name: "XBPS1 Illuminance"
    conductivity:
      name: "XBPS1 Soil Conductivity"
    battery_level:
      name: "XBPS1 Battery Level"

  - platform: xiaomi_hhccjcy01
    mac_address: 'C4:7C:8D:6B:98:62'
    temperature:
      name: "XBPS2 Temperature"
    moisture:
      name: "XBPS2 Moisture"
    illuminance:
      name: "XBPS2 Illuminance"
    conductivity:
      name: "XBPS2 Soil Conductivity"
    battery_level:
      name: "XBPS2 Battery Level"

  - platform: xiaomi_hhccjcy01
    mac_address: 'C4:7C:8D:6B:95:8C'
    temperature:
      name: "XBPS3 Temperature"
    moisture:
      name: "XBPS3 Moisture"
    illuminance:
      name: "XBPS3 Illuminance"
    conductivity:
      name: "XBPS3 Soil Conductivity"
    battery_level:
      name: "XBPS3 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:75:02"
    temperature:
      name: "XBCS1 Temperature"
    humidity:
      name: "XBCS1 Humidity"
    battery_level:
      name: "XBCS1 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:6F:77"
    temperature:
      name: "XBCS2 Temperature"
    humidity:
      name: "XBCS2 Humidity"
    battery_level:
      name: "XBCS2 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:75:3E"
    temperature:
      name: "XBCS3 Temperature"
    humidity:
      name: "XBCS3 Humidity"
    battery_level:
      name: "XBCS3 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:8D:59"
    temperature:
      name: "XBCS4 Temperature"
    humidity:
      name: "XBCS4 Humidity"
    battery_level:
      name: "XBCS4 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:8E:55"
    temperature:
      name: "XBCS5 Temperature"
    humidity:
      name: "XBCS5 Humidity"
    battery_level:
      name: "XBCS5 Battery Level"

  - platform: xiaomi_lywsdcgq
    mac_address: "58:2D:34:3B:8B:17"
    temperature:
      name: "XBCS6 Temperature"
    humidity:
      name: "XBCS6 Humidity"
    battery_level:
      name: "XBCS6 Battery Level"

#  - platform: mqtt_subscribe
#    name: "netatmo outside"
#    id: netatmo_outside
#    topic: sathome/environment/aussenmodul/netatmo/temperature

#  - platform: mqtt_subscribe
#    name: "mobilealerts balkon"
#    id: mobilealerts_balkon
#    topic: sathome/environment/balkon/mobilealerts/temperature

#  - platform: mqtt_subscribe
#    name: "mobilealerts eingang"
#    id: mobilealerts_eingang
#    topic: sathome/environment/eingang/mobilealerts/temperature

mqtt:
  broker: !secret mqtt_broker 
  topic_prefix: sathome/environment/${hostname}

#i2c:
#  sda: 14 
#  scl: 13 

#font:
#  - file: 'slkscr.ttf'
#    id: font1
#    size: 12 
#  - file: 'SourceCodePro-Light.ttf'
#    id: font2
#    size: 12 
#  - file: 'Roboto-Regular.ttf'
#    id: font3
#    size: 13

#display:
#  - platform: ssd1306_i2c
#    model: "SSD1306 128x32"
#    address: 0x3c
#    brightness: 1%
#    lambda: |-
#      it.printf(0, 5, id(font3),"NA: %.1f MAB: %.1f",id(netatmo_outside).state,id(mobilealerts_balkon).state);
#      it.printf(0, 18, id(font3),"MAE: %.1f RV: %.1f",id(mobilealerts_eingang).state,id(ruuvi_balkon_temp).state);