TypeART ·

What is TypeART?

TypeART [TA18; TA20] is a type and memory allocation tracking sanitizer based on the LLVM compiler toolchain for C/C++ (OpenMP) codes. It consists of an LLVM compiler pass plugin for instrumentation, and a corresponding runtime to track memory allocations during the execution of a target program.

TypeART instruments heap, stack and global variable allocations with a callback to our runtime. The callback consists of (1) the memory address, (2) the type-layout information of the allocation (built-ins, user-defined structs etc.) and (3) number of elements.

Why use it?

TypeART provides type-related information of allocations in your program to help verify some property, and to help generate diagnostics if it doesn't hold.

For instance, low-level C-language APIs use void-pointers as generic types. Often, the user must specify its type and length manually. This can be error-prone. Examples for type unsafe APIs include the Message-Passing Interface (MPI), checkpointing libraries and numeric solver libraries. With TypeART, it is straightforward to verify that a void -pointer argument to an API is, e.g., a type T array with length n.

Use Case: MUST - A dynamic MPI correctness checker

MUST [MU13] is a dynamic MPI correctness checker to, e.g., detect deadlocks or a mismatch of MPI datatypes of the sending and receiving process, see its project page.

MUST relies on intercepting MPI calls for its analysis. As a consequence, though, MUST is unaware of the effective type of the allocated void* buffers used for the low-level MPI API. To that end, TypeART was developed to track memory (de-)allocation relevant to MPI communication. With TypeART, MUST can check for type compatibility between the type-less MPI communication buffer and the declared MPI datatype.

Type checking for MPI calls

Consider the MPI function MPI_Send(const void* buffer, int count, MPI_Datatype datatype, ...). Without TypeART, MUST cannot check (1) if the buffer argument is compatible with the declared MPI_Dataype and (2) if the count argument exceeds the buffer allocation size:

// TypeART tracks this allocation (memory address, type and size):
double* array = (double*) malloc(length*sizeof(double));
// MUST intercepts this MPI call, and asks TypeARTs runtime library for type information:
//   1. Is the first argument of type double (due to MPI_DOUBLE)?
//   2. Is the allocation at least of size *length*? 
MPI_Send((void*) array, length, MPI_DOUBLE, ...)

MUST and TypeART also handle MPI derived datatypes with complex underlying data structures, see our MPI Demo. For more details, see our publications, or download the current release of MUST (1.8 or higher has TypeART integrated) on its project page.

1. Using TypeART

Making use of TypeART consists of two phases:

Compile your code with Clang/LLVM (version >= 10) using the TypeART LLVM pass plugins to (1) serialize static type information to a file and (2) instrument all relevant allocations. See Section 1.1.
Execute the target program with a runtime library (a client based on the TypeART runtime) to accept the callbacks to do some useful analysis with our interface based on the static type information. See Section 1.2.

1.1 Compiling a target code

Our LLVM compiler pass plugins instrument allocations and also serialize the static type layouts of these allocations to a yaml file (default name types.yaml). To that end, we provide compiler wrapper scripts around Clang and MPI to apply TypeART in the bin folder of the TypeART installation prefix. By default, the wrappers instrument heap, stack and global allocations. The MPI-wrappers also filter allocations that are not passed to an MPI call, see Section 1.1.4.

Note: Currently, the compilation process has to be serialied, e.g., make -j 1, due to extraction and consistency of type information per translation unit.

1.1.1 Building with TypeART

A typical compile invocation may first compile code to object files and then link with any libraries:

# Compile:
$> clang++ -O2 $(COMPILE_FLAGS) -c code.cpp -o code.o
# Link:
$> clang++ $(LINK_FLAGS) code.o -o binary

With TypeART, the recipe needs to be changed to, e.g., use our provided compiler wrapper, as we rely on the LLVM opt (optimizer) tool to load and apply our TypeART passes to a target code:

# Compile, replace direct clang++ call with wrapper of the TypeART installation:
$> typeart-clang++ -O2 $(COMPILE_FLAGS) -c code.cpp -o code.o
# Link, also with the wrapper:
$> typeart-clang++ $(LINK_FLAGS) code.o -o binary

In particular, the wrapper script does the following:

Compile the code down to LLVM IR, and pipe the output to the LLVM opt tool. (Keeping your original compile flags)
Apply heap instrumentation with TypeART through opt.
Optimize the code with your -Ox flag using opt.
Apply stack and global instrumentation with TypeART through opt.
Pipe the final output to LLVM llc to generate the final object file.
Finally, link the TypeART runtime library using your linker flags.

Note: We instrument heap allocations before any optimization, as the compiler may throw out type information of these allocations (for optimization reasons).

Wrapper usage in CMake build systems

For plain Makefiles, the wrapper replaces the GCC/Clang compiler variables, e.g., CC or MPICC. For CMake, during the configuration, it is advised to disable the wrapper temporarily. This is due to CMake executing internal compiler checks, where we do not need TypeART instrumentation:

# Temporarily disable wrapper with environment flag TYPEART_WRAPPER=OFF for configuration:
$> TYPEART_WRAPPER=OFF cmake -B build -DCMAKE_C_COMPILER=*TypeART bin*/typeart-clang 
# Compile with TypeART now:
$> cmake --build build --target install

MPI wrapper generation

For MPI, we rely on detecting the vendor to generate wrappers with appropriate environment variables to force the use of the Clang/LLVM compiler. We support detection for OpenMPI, Intel MPI and MPICH based on mpi.h symbols, and use the following flags for setting the Clang compiler:

Vendor	Symbol	C compiler env. var	C++ compiler env. var
Open MPI	OPEN_MPI	OMPI_CC	OMPI_CXX
Intel MPI	I_MPI_VERSION	I_MPI_CC	I_MPI_CXX
MPICH	MPICH_NAME	MPICH_CC	MPICH_CXX

Internal wrapper invocation

For reference, the wrapper script executes the following (pseudo):

# Compile: 1.Code-To-LLVM | 2.TypeART_HEAP | 3.Optimize | 4.TypeART_Stack | 5.Object-file 
$> clang++ $(COMPILE_FLAGS) $(EMIT_LLVM_IR_FLAGS) code.cpp | opt $(TYPEART_PLUGIN) $(HEAP_ONLY_FLAGS) | opt -O2 -S | opt $(TYPEART_PLUGIN) $(STACK_ONLY_FLAGS) | llc $(TO_OBJECT_FILE)
# Link:
$> clang++ $(LINK_FLAGS) -L$(TYPEART_LIBPATH) -ltypeartRuntime code.o -o binary

1.1.2 Options for TypeART passes

For modification of the pass behavior, we provide several options.

Flag	Default	Description
`typeart`	-	Invoke TypeART pass through LLVM `opt`
`typeart-types`	`types.yaml`	Serialized type layout information of user-defined types. File location and name can also be controlled with the env variable `TYPEART_TYPE_FILE`.
`typeart-heap`	`true`	Instrument heap allocations
`typeart-stack`	`false`	Instrument stack and global allocations. Enables instrumentation of global allocations.
`typeart-global`	`false`	Instrument global allocations (see --typeart-stack).
`typeart-stats`	`false`	Show instrumentation statistic counters
`typeart-call-filter`	`false`	Filter stack and global allocations. See also Section 1.1.4
`typeart-call-filter-str`	`MPI_`	Filter string target (glob string)
`typeart-filter-pointer-alloca`	`true`	Filter stack alloca of pointers (typically generated by LLVM for references of stack vars)

Example invocations

Pre-requisites

Loading TypeART plugins with opt:

TYPEART_PLUGIN=-load $(PLUGIN_PATH)/typeartTransformPass.so

Input of opt is LLVM IR, e.g.:

# Pipe LLVM IR to console:
$> clang++ -O1 -g -Xclang -disable-llvm-passes -S -emit-llvm -o - example.cpp

Examples

Heap-only instrumentation (with stats):

opt $(TYPEART_PLUGIN) -typeart -typeart-stats

Stack- and global-only instrumentation (no stats):

opt $(TYPEART_PLUGIN) -typeart -typeart-heap=true -typeart-stack

Stack- and global-only instrumentation (with default filtering for MPI):

opt $(TYPEART_PLUGIN) -typeart -typeart-heap=false -typeart-stack -typeart-call-filter

Filtering w.r.t. non-standard target API:

opt $(TYPEART_PLUGIN) -typeart -typeart-heap=false -typeart-stack -typeart-call-filter -typeart-call-filter-str=MY_API*

Combined instrumentation (with filtering):

opt $(TYPEART_PLUGIN) -typeart -typeart-stack -typeart-call-filter

1.1.3 Serialized type information

After instrumentation, the file types.yaml contains the static type information. Each user-defined type layout is extracted and an integer type-id is attached to it. Built-in types (e.g., float) have pre-defined ids and byte layouts.

The TypeART instrumentation callbacks use the type-id. The runtime library correlates the allocation with the respective type (and layout) during execution. Consider the following struct:

struct s1_t {
  char a[3];
  struct s1_t* b;
}

The TypeART pass may write a types.yaml file with the following content:

- id: 256            // struct type-id
  name: struct.s1_t
  extent: 16         // byte size
  member_count: 2
  offsets: [ 0, 8 ]  // byte offsets from struct start
  types: [ 0, 10 ]   // member type-ids (0->char, 10->pointer)
  sizes: [ 3, 1 ]    // member (array) length

1.1.4 Filtering allocations

To improve performance, a translation unit-local (TU) data-flow filter for global and stack variables exist. It follows the LLVM IR use-def chain. If the allocation provably never reaches the target API, it can be filtered. Otherwise, it is instrumented.

Consider the following example.

extern foo_bar(float*); // No definition in the TU 
void bar(float* x, float* y) {
  *x = 2.f; // x is not used after
  MPI_Send(y, ...);
}
void foo() {
  float a = 1.f, b = 2.f, c = 3.f;
  bar(&a, &b);
  foo_bar(&c);
}

The filter can remove a, as the aliasing pointer x is never part of an MPI call.
b is instrumented as the aliasing pointer y is part of an MPI call.
c is instrumented as we cannot reason about the body of foo_bar.

1.2 Executing an instrumented target code

To execute the instrumented code, the TypeART runtime library (or a derivative) has to be loaded to accept the callbacks. The library also requires access to the types.yaml file to correlate the type-id with the actual type layouts. To specify its path, you can use the environment variable TYPEART_TYPE_FILE, e.g.:

$> export TYPEART_TYPE_FILE=/shared/types.yaml
# If the TypeART runtime is not resolved, LD_LIBRARY_PATH is set:
$> env LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$(TYPEART_LIBPATH) ./binary

An example for pre-loading a TypeART-based library in the context of MPI is found in the demo, see Section 1.3.

1.3 Example: MPI demo

The folder demo contains an example of MPI-related type errors that can be detected using TypeART. The code is compiled with our instrumentation, and executed by preloading the MPI-related check library implemented in tool.c. The check library uses the TypeART runtime query interface. It overloads the required MPI calls and checks that the passed void* buffer is correct w.r.t. the MPI derived datatype.

To compile and run the demo targets:

Makefile

# Valid MPI demo:
$> MPICC=*TypeART prefix*/bin/typeart-mpicc make run-demo
# Type-error MPI demo:
$> MPICC=*TypeART prefix*/bin/typeart-mpicc make run-demo_broken

CMake, likewise:

$> TYPEART_WRAPPER=OFF cmake -S demo -B build_demo -DCMAKE_C_COMPILER=*TypeART prefix*/bin/typeart-mpicc 
$> cmake --build build_demo --target run-demo
$> cmake --build build_demo --target run-demo_broken

2. Building TypeART

TypeART requires LLVM version >= 10 and CMake version >= 3.20.

2.1 Optional software requirements

MPI library: (soft requirement) Needed for the MPI compiler wrappers, tests, the demo, our MPI interceptor library, and for logging with our TypeART runtime library within an MPI target application.
OpenMP-enabled Clang compiler: Needed for some tests.

Other smaller, external dependencies are defined within the externals folder (depending on configuration options), see Section 2.2.1 (Runtime). They are automatically downloaded during configuration time (internet connection required).

2.2 Building

TypeART uses CMake to build, cf. GitHub CI build file for a complete recipe to build. Example build recipe (debug build, installs to default prefix ${typeart_SOURCE_DIR}/install/typeart)

$> git clone https://github.com/tudasc/TypeART
$> cd TypeART
$> cmake -B build
$> cmake --build build --target install --parallel

2.2.1 CMake configuration: Options for users

Binaries (scripts)

Option	Default	Description
`TYPEART_MPI_WRAPPER`	`ON`	Install TypeART MPI wrapper (mpic, mpic++). Requires MPI.

Runtime

Option	Default	Description
`TYPEART_ABSEIL`	`ON`	Enable usage of btree-backed map of the Abseil project (LTS release) for storing allocation data.
`TYPEART_PHMAP`	`OFF`	Enable usage of a btree-backed map (alternative to Abseil).
`TYPEART_SOFTCOUNTERS`	`OFF`	Enable runtime tracking of #tracked addrs. / #distinct checks / etc.
`TYPEART_LOG_LEVEL_RT`	`0`	Granularity of runtime logger. 3 is most verbose, 0 is least.

Runtime thread-safety options

Default mode is to protect the global data structure with a (shared) mutex. Two main options exist:

Option	Default	Description
`TYPEART_DISABLE_THREAD_SAFETY`	`OFF`	Disable thread safety of runtime
`TYPEART_SAFEPTR`	`OFF`	Instead of a mutex, use a special data structure wrapper for concurrency, see object_threadsafe

LLVM passes

Option	Default	Description
`TYPEART_SHOW_STATS`	`ON`	Passes show compile-time summary w.r.t. allocations counts
`TYPEART_MPI_INTERCEPT_LIB`	`ON`	Library to intercept MPI calls by preloading and check whether TypeART tracks the buffer pointer
`TYPEART_MPI_LOGGER`	`ON`	Enable better logging support in MPI execution context
`TYPEART_LOG_LEVEL`	`0`	Granularity of pass logger. 3 is most verbose, 0 is least

Testing

Option	Default	Description
`TYPEART_TEST_CONFIG`	`OFF`	Enable testing, and set (force) logging levels to appropriate levels for test runner to succeed
`TYPEART_CODE_COVERAGE`	`OFF`	Enable code coverage statistics using LCOV 1.14 and genhtml (gcovr optional)
`TYPEART_LLVM_CODE_COVERAGE`	`OFF`	Enable llvm-cov code coverage statistics (llvm-cov and llvm-profdata required)
`TYPEART_ASAN, TSAN, UBSAN`	`OFF`	Enable Clang sanitizers (tsan is mutually exclusive w.r.t. ubsan and asan as they don't play well together)

References

[TA18]	Hück, Alexander and Lehr, Jan-Patrick and Kreutzer, Sebastian and Protze, Joachim and Terboven, Christian and Bischof, Christian and Müller, Matthias S. Compiler-aided type tracking for correctness checking of MPI applications. In 2nd International Workshop on Software Correctness for HPC Applications (Correctness), pages 51–58. IEEE, 2018.
[TA20]	Hück, Alexander and Protze, Joachim and Lehr, Jan-Patrick and Terboven, Christian and Bischof, Christian and Müller, Matthias S. Towards compiler-aided correctness checking of adjoint MPI applications. In 4th International Workshop on Software Correctness for HPC Applications (Correctness), pages 40–48. IEEE/ACM, 2020.
[MU13]	Hilbrich, Tobias and Protze, Joachim and Schulz, Martin and de Supinski, Bronis R. and Müller, Matthias S. MPI Runtime Error Detection with MUST: Advances in Deadlock Detection. In Scientific Programming, vol. 21, no. 3-4, pages 109–121, 2013.

Name		Name	Last commit message	Last commit date
Latest commit History 625 Commits
.github/workflows		.github/workflows
cmake		cmake
demo		demo
externals		externals
lib		lib
scripts		scripts
test		test
.clang-format		.clang-format
.clang-tidy		.clang-tidy
.codespellrc		.codespellrc
.gitignore		.gitignore
AUTHORS		AUTHORS
CMakeLists.txt		CMakeLists.txt
CMakePresets.json		CMakePresets.json
LICENSE.txt		LICENSE.txt
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

TypeART ·

What is TypeART?

Why use it?

Use Case: MUST - A dynamic MPI correctness checker

Type checking for MPI calls

Table of Contents

1. Using TypeART

1.1 Compiling a target code

1.1.1 Building with TypeART

Wrapper usage in CMake build systems

MPI wrapper generation

Internal wrapper invocation

1.1.2 Options for TypeART passes

Example invocations

Pre-requisites

Examples

1.1.3 Serialized type information

1.1.4 Filtering allocations

1.2 Executing an instrumented target code

1.3 Example: MPI demo

2. Building TypeART

2.1 Optional software requirements

2.2 Building

2.2.1 CMake configuration: Options for users

Binaries (scripts)

Runtime

Runtime thread-safety options

LLVM passes

Testing

References

About

Releases

Packages

Languages

License

ste-lam/TypeART

Folders and files

Latest commit

History

Repository files navigation

TypeART ·

What is TypeART?

Why use it?

Use Case: MUST - A dynamic MPI correctness checker

Type checking for MPI calls

Table of Contents

1. Using TypeART

1.1 Compiling a target code

1.1.1 Building with TypeART

Wrapper usage in CMake build systems

MPI wrapper generation

Internal wrapper invocation

1.1.2 Options for TypeART passes

Example invocations

Pre-requisites

Examples

1.1.3 Serialized type information

1.1.4 Filtering allocations

1.2 Executing an instrumented target code

1.3 Example: MPI demo

2. Building TypeART

2.1 Optional software requirements

2.2 Building

2.2.1 CMake configuration: Options for users

Binaries (scripts)

Runtime

Runtime thread-safety options

LLVM passes

Testing

References

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages