Trying to print a temp tower, print starts cold?

[QuartzIMG]

When i try to print this temp tower, the print starts with the printer dead cold with no warmup.

I'm starting from Calibration > Temp, and setting it up like this:

But in two different gcode senders it starts to print cold, have I borked some filament setting somewhere? first and subsequent layers should be 210 with what i have set:

Attached the resulting gcode, when i view it in temp mode it LOOKS like its trying to print that first layer cold:

what have i done?
Temperature calibration.gcode.txt

[QuartzIMG]

Ok this is weirder to me, only ONE of the flow calibration parts tries to print cold? O.o

[supermerill]

only one because they are printed one after another (complete_object setting) So only the first one start cold.

[supermerill]

The only way to start cold is to set the "only custom start gcode" and mess up the custom start gcode (as i've added a failsafe to prevent any cold start).

[QuartzIMG]

@supermerill Hey thanks for the fast reply! I dont think i changed that at all:

attached the gcode as well, i suck at reading it but i see the initial setting of the bed and extruder temps

Temperature calibration.gcode.txt

[supermerill]

oh, maybe you set your firmware to be makerware or sailfish?

[QuartzIMG]

This is my entire user config, if thats useful? i just have the one profile, only started testing with superslicer heavily today (its awesome by the way
SuperSlicer.zip
)

[QuartzIMG]

Ooops!

Ill try Marlin!

[QuartzIMG]

That was it, sorry to trouble you about it! Drove me NUTS

[supermerill]

it's that. your makerbot use M109 to heat bed, not extruder, but the current gcode viewer isn't capable of understanding that. that's why you see that.
It's a kind of bug (or oversight)