diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
index 85eab0e3e1c..15f5d6eebd5 100644
--- a/resources/localization/PrusaSlicer.pot
+++ b/resources/localization/PrusaSlicer.pot
@@ -3,12 +3,10 @@
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-#, fuzzy
 msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+msgstr "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-18 13:59+0100\n"
+"POT-Creation-Date: 2020-11-18 12:28+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,141 +16,137 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:299
+#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:297
 msgid "Portions copyright"
-msgstr ""
+msgstr "חלקים בזכויות יוצרים"
 
-#: src/slic3r/GUI/AboutDialog.cpp:135 src/slic3r/GUI/AboutDialog.cpp:263
+#: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261
 msgid "Copyright"
-msgstr ""
+msgstr "זכויות יוצרים"
 
 #. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:137
+#: src/slic3r/GUI/AboutDialog.cpp:134
 msgid ""
 "License agreements of all following programs (libraries) are part of "
 "application license agreement"
-msgstr ""
+msgstr "הסכמי רישיון של כל התוכניות הבאות (ספריות) הם חלק מהסכם הרישיון ליישום"
 
-#: src/slic3r/GUI/AboutDialog.cpp:206
+#: src/slic3r/GUI/AboutDialog.cpp:204
 #, possible-c-format
 msgid "About %s"
-msgstr ""
+msgstr "אודות %s"
 
-#: src/slic3r/GUI/AboutDialog.cpp:238 src/slic3r/GUI/AboutDialog.cpp:361
-#: src/slic3r/GUI/GUI_App.cpp:235 src/slic3r/GUI/MainFrame.cpp:151
+#: src/slic3r/GUI/AboutDialog.cpp:236 src/slic3r/GUI/GUI_App.cpp:231
+#: src/slic3r/GUI/MainFrame.cpp:164
 msgid "Version"
-msgstr ""
+msgstr "גרסה"
 
 #. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:265 src/slic3r/GUI/GUI_App.cpp:240
+#: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:236
 msgid "is licensed under the"
-msgstr ""
+msgstr "מורשה תחת"
 
-#: src/slic3r/GUI/AboutDialog.cpp:266 src/slic3r/GUI/GUI_App.cpp:240
+#: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:236
 msgid "GNU Affero General Public License, version 3"
-msgstr ""
+msgstr "רישיון ציבורי כללי של GNU Affero, גרסה 3"
 
-#: src/slic3r/GUI/AboutDialog.cpp:267
+#: src/slic3r/GUI/AboutDialog.cpp:265
 msgid ""
 "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
 "community."
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:268
+#: src/slic3r/GUI/AboutDialog.cpp:266
 msgid ""
 "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
 "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
 "numerous others."
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:304
-msgid "Copy Version Info"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:77
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
 "If you are sure you have enough RAM on your system, this may also be a bug "
 "and we would be glad if you reported it."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
-msgid "Unknown error occured during exporting G-code."
-msgstr ""
+msgstr "%s נתקל בשגיאה. זה ככל הנראה נגרם על ידי שגיאת חוסר מקום האם בוודאות יש מספיק זיכרון זמני (RAM) במערכת? זה גם יכול להיות תקלה ואודה לדיווחים עליה."
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:156
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. Maybe the SD "
 "card is write locked?\n"
 "Error message: %1%"
-msgstr ""
+msgstr "Copying of the temporary G-code to the output G-code failed. אולי כרטיס הזיכרון נעול לכתיבה?\n"
+"הודעת שגיאה: %1%"
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:159
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. There might be "
 "problem with target device, please try exporting again or using different "
 "device. The corrupted output G-code is at %1%.tmp."
-msgstr ""
+msgstr "Copying of the temporary G-code to the output G-code failed. ייתכן שיש בעיה במכשיר היעד. נסה לייצא שוב או להשתמש במכשיר אחר. The corrupted output G-code is at %1%.tmp."
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:174
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
 msgid ""
 "Renaming of the G-code after copying to the selected destination folder has "
 "failed. Current path is %1%.tmp. Please try exporting again."
-msgstr ""
+msgstr "Renaming of the G-code after copying to the selected destination folder has failed. הנתיב הנוכחי הוא: %1%.tmp. אנא נסה לבצע ייצוא שנית"
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:165
 msgid ""
 "Copying of the temporary G-code has finished but the original code at %1% "
 "couldn't be opened during copy check. The output G-code is at %2%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
 msgid ""
 "Copying of the temporary G-code has finished but the exported code couldn't "
 "be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:187
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:536
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171
+msgid "Unknown error occured during exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:176
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:525
 msgid "Running post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:189
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:178
 msgid "G-code file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:194
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:243
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:232
 msgid "Slicing complete"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:238
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:227
 msgid "Masked SLA file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:539
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:528
 msgid "Copying of the temporary G-code to the output G-code failed"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:562
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:551
 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:93
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162
-#: src/slic3r/GUI/Tab.cpp:2536
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:161
+#: src/slic3r/GUI/Tab.cpp:2504
 msgid "Size"
-msgstr ""
+msgstr "גודל"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:94
 msgid "Origin"
-msgstr ""
+msgstr "מוצא"
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:771
+#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:752
 msgid "Diameter"
-msgstr ""
+msgstr "קוטר"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:110
 msgid "Size in X and Y of the rectangular plate."
@@ -164,209 +158,212 @@ msgid ""
 "rectangle."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:242
-#: src/slic3r/GUI/ConfigWizard.cpp:1368 src/slic3r/GUI/ConfigWizard.cpp:1382
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88
-#: src/slic3r/GUI/GCodeViewer.cpp:2337 src/slic3r/GUI/GCodeViewer.cpp:2343
-#: src/slic3r/GUI/GCodeViewer.cpp:2351 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
+#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:240
+#: src/slic3r/GUI/ConfigWizard.cpp:1346 src/slic3r/GUI/ConfigWizard.cpp:1360
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
+#: src/slic3r/GUI/GCodeViewer.cpp:2275 src/slic3r/GUI/GCodeViewer.cpp:2281
+#: src/slic3r/GUI/GCodeViewer.cpp:2289 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96
-#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:77
-#: src/libslic3r/PrintConfig.cpp:84 src/libslic3r/PrintConfig.cpp:95
-#: src/libslic3r/PrintConfig.cpp:135 src/libslic3r/PrintConfig.cpp:244
-#: src/libslic3r/PrintConfig.cpp:302 src/libslic3r/PrintConfig.cpp:377
-#: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:435
-#: src/libslic3r/PrintConfig.cpp:565 src/libslic3r/PrintConfig.cpp:576
-#: src/libslic3r/PrintConfig.cpp:594 src/libslic3r/PrintConfig.cpp:774
-#: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1439
-#: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1518
-#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1594
-#: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1729
-#: src/libslic3r/PrintConfig.cpp:1737 src/libslic3r/PrintConfig.cpp:1778
-#: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1796
-#: src/libslic3r/PrintConfig.cpp:1804 src/libslic3r/PrintConfig.cpp:1812
-#: src/libslic3r/PrintConfig.cpp:1875 src/libslic3r/PrintConfig.cpp:2141
-#: src/libslic3r/PrintConfig.cpp:2212 src/libslic3r/PrintConfig.cpp:2246
-#: src/libslic3r/PrintConfig.cpp:2375 src/libslic3r/PrintConfig.cpp:2454
-#: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2468
-#: src/libslic3r/PrintConfig.cpp:2498 src/libslic3r/PrintConfig.cpp:2508
-#: src/libslic3r/PrintConfig.cpp:2518 src/libslic3r/PrintConfig.cpp:2678
-#: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2851
-#: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2869
-#: src/libslic3r/PrintConfig.cpp:2879 src/libslic3r/PrintConfig.cpp:2944
-#: src/libslic3r/PrintConfig.cpp:2954 src/libslic3r/PrintConfig.cpp:2966
-#: src/libslic3r/PrintConfig.cpp:2986 src/libslic3r/PrintConfig.cpp:2996
-#: src/libslic3r/PrintConfig.cpp:3006 src/libslic3r/PrintConfig.cpp:3024
-#: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3053
-#: src/libslic3r/PrintConfig.cpp:3064 src/libslic3r/PrintConfig.cpp:3077
-#: src/libslic3r/PrintConfig.cpp:3122 src/libslic3r/PrintConfig.cpp:3132
-#: src/libslic3r/PrintConfig.cpp:3141 src/libslic3r/PrintConfig.cpp:3151
-#: src/libslic3r/PrintConfig.cpp:3167 src/libslic3r/PrintConfig.cpp:3191
+#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
+#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93
+#: src/libslic3r/PrintConfig.cpp:131 src/libslic3r/PrintConfig.cpp:229
+#: src/libslic3r/PrintConfig.cpp:287 src/libslic3r/PrintConfig.cpp:362
+#: src/libslic3r/PrintConfig.cpp:370 src/libslic3r/PrintConfig.cpp:420
+#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:559
+#: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:755
+#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1348
+#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1427
+#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1503
+#: src/libslic3r/PrintConfig.cpp:1513 src/libslic3r/PrintConfig.cpp:1635
+#: src/libslic3r/PrintConfig.cpp:1643 src/libslic3r/PrintConfig.cpp:1684
+#: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1702
+#: src/libslic3r/PrintConfig.cpp:1710 src/libslic3r/PrintConfig.cpp:1718
+#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:2047
+#: src/libslic3r/PrintConfig.cpp:2118 src/libslic3r/PrintConfig.cpp:2152
+#: src/libslic3r/PrintConfig.cpp:2281 src/libslic3r/PrintConfig.cpp:2360
+#: src/libslic3r/PrintConfig.cpp:2367 src/libslic3r/PrintConfig.cpp:2374
+#: src/libslic3r/PrintConfig.cpp:2404 src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2584
+#: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2757
+#: src/libslic3r/PrintConfig.cpp:2766 src/libslic3r/PrintConfig.cpp:2775
+#: src/libslic3r/PrintConfig.cpp:2785 src/libslic3r/PrintConfig.cpp:2850
+#: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2872
+#: src/libslic3r/PrintConfig.cpp:2892 src/libslic3r/PrintConfig.cpp:2902
+#: src/libslic3r/PrintConfig.cpp:2912 src/libslic3r/PrintConfig.cpp:2930
+#: src/libslic3r/PrintConfig.cpp:2945 src/libslic3r/PrintConfig.cpp:2959
+#: src/libslic3r/PrintConfig.cpp:2970 src/libslic3r/PrintConfig.cpp:2983
+#: src/libslic3r/PrintConfig.cpp:3028 src/libslic3r/PrintConfig.cpp:3038
+#: src/libslic3r/PrintConfig.cpp:3047 src/libslic3r/PrintConfig.cpp:3057
+#: src/libslic3r/PrintConfig.cpp:3073 src/libslic3r/PrintConfig.cpp:3097
 msgid "mm"
-msgstr ""
+msgstr "מ\"מ"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:131
 msgid ""
 "Diameter of the print bed. It is assumed that origin (0,0) is located in the "
 "center."
-msgstr ""
+msgstr "קוטר מיטת ההדפסה. ההנחה היא שמוצא (0,0) נמצא במרכז."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:141
 msgid "Rectangular"
-msgstr ""
+msgstr "מלבני"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:142
 msgid "Circular"
-msgstr ""
+msgstr "מעוגל"
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:243
+#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:309
 #: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358
 msgid "Custom"
-msgstr ""
+msgstr "מותאים אישית"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:145
 msgid "Invalid"
-msgstr ""
+msgstr "לא תקין"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2288
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2215
 msgid "Shape"
-msgstr ""
+msgstr "צורה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:243
 msgid "Load shape from STL..."
-msgstr ""
+msgstr "טען צורה מ- STL ..."
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1826
+#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1981
 msgid "Settings"
-msgstr ""
+msgstr "הגדרות"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:315
 msgid "Texture"
-msgstr ""
+msgstr "מרקם"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
 msgid "Load..."
-msgstr ""
+msgstr "טעינה..."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
-#: src/slic3r/GUI/Tab.cpp:3484
+#: src/slic3r/GUI/Tab.cpp:3447
 msgid "Remove"
-msgstr ""
+msgstr "הסרה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
 msgid "Not found:"
-msgstr ""
+msgstr "לא נמצא:"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:395
 msgid "Model"
-msgstr ""
+msgstr "מוֹדֵל"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:563
 msgid "Choose an STL file to import bed shape from:"
-msgstr ""
+msgstr "בחר קובץ STL ממנו ניתן לייבא צורת מיטה:"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
 #: src/slic3r/GUI/BedShapeDialog.cpp:642
 msgid "Invalid file format."
-msgstr ""
+msgstr "קובץ בפורמט שאינו נתמך"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:581
 msgid "Error! Invalid model"
-msgstr ""
+msgstr "שגיאה! מוֹדֵל לא תקין"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:589
 msgid "The selected file contains no geometry."
-msgstr ""
+msgstr "הקובץ הנבחר אינו מכיל גיאומטריה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:593
 msgid ""
 "The selected file contains several disjoint areas. This is not supported."
-msgstr ""
+msgstr "הקובץ שנבחר מכיל כמה אזורים נפרדים. זה לא נתמך."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:608
 msgid "Choose a file to import bed texture from (PNG/SVG):"
-msgstr ""
+msgstr "בחר קובץ"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:631
 msgid "Choose an STL file to import bed model from:"
-msgstr ""
+msgstr "בחר קובץ STL לייבא ממנו צורת מיטה:"
 
-#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1327
+#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1305
 msgid "Bed Shape"
-msgstr ""
+msgstr "צורת מיטה"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:55
 msgid "Network lookup"
-msgstr ""
+msgstr "חיפוש ברשת"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:72
 msgid "Address"
-msgstr ""
+msgstr "כתובת"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:73
 msgid "Hostname"
-msgstr ""
+msgstr "שם מארח"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:74
 msgid "Service name"
-msgstr ""
+msgstr "שם השירות"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:76
 msgid "OctoPrint version"
-msgstr ""
+msgstr "גרסת OctoPrint"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:218
 msgid "Searching for devices"
-msgstr ""
+msgstr "מחפש מכשירים"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:225
 msgid "Finished"
-msgstr ""
+msgstr "הסתיים"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:16
 msgid "Buttons And Text Colors Description"
-msgstr ""
+msgstr "כפתורים וצבעי טקסט תיאור"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:36
 msgid "Value is the same as the system value"
-msgstr ""
+msgstr "הערך זהה לערך המערכת"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:53
 msgid ""
 "Value was changed and is not equal to the system value or the last saved "
 "preset"
-msgstr ""
+msgstr "הערך השתנה ואינו שווה לערך המערכת או להגדרה המוגדרת מראש שנשמרה"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:48
+#: src/slic3r/GUI/ConfigManipulation.cpp:47
 msgid ""
 "Zero layer height is not valid.\n"
 "\n"
 "The layer height will be reset to 0.01."
-msgstr ""
+msgstr "שכבה בגובה אפס אינה חוקית\n"
+"\n"
+"גובה השכבה יאופס ל 0.01."
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:49
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1387
-#: src/libslic3r/PrintConfig.cpp:73
+#: src/slic3r/GUI/ConfigManipulation.cpp:48
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1376
+#: src/libslic3r/PrintConfig.cpp:71
 msgid "Layer height"
-msgstr ""
+msgstr "גובה השכבה"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:60
+#: src/slic3r/GUI/ConfigManipulation.cpp:59
 msgid ""
 "Zero first layer height is not valid.\n"
 "\n"
 "The first layer height will be reset to 0.01."
-msgstr ""
+msgstr "גובה 0 עבור שכבה ראשונה אינו חוקי\n"
+"\n"
+"גובה השכבה הראשונה יאופס ל 0.01."
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:969
+#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:938
 msgid "First layer height"
-msgstr ""
+msgstr "גובה שכבה ראשונה"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:81
+#: src/slic3r/GUI/ConfigManipulation.cpp:80
 #, possible-c-format
 msgid ""
 "The Spiral Vase mode requires:\n"
@@ -378,15 +375,15 @@ msgid ""
 "- Detect thin walls disabled"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:89
+#: src/slic3r/GUI/ConfigManipulation.cpp:88
 msgid "Shall I adjust those settings in order to enable Spiral Vase?"
-msgstr ""
+msgstr "האם לשנות את ההגדרות הללו על מנת לאפשר מצב אגרטל ספירלי?"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:90
+#: src/slic3r/GUI/ConfigManipulation.cpp:89
 msgid "Spiral Vase"
-msgstr ""
+msgstr "אגרטל ספירלי"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:115
+#: src/slic3r/GUI/ConfigManipulation.cpp:114
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only\n"
 "if they are printed with the current extruder without triggering a tool "
@@ -395,283 +392,282 @@ msgid ""
 "to be set to 0)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:119
+#: src/slic3r/GUI/ConfigManipulation.cpp:118
 msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:120
-#: src/slic3r/GUI/ConfigManipulation.cpp:140
+#: src/slic3r/GUI/ConfigManipulation.cpp:119
+#: src/slic3r/GUI/ConfigManipulation.cpp:139
 msgid "Wipe Tower"
-msgstr ""
+msgstr "מגדל ניגוב"
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:136
+#: src/slic3r/GUI/ConfigManipulation.cpp:135
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers\n"
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:139
+#: src/slic3r/GUI/ConfigManipulation.cpp:138
 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:159
+#: src/slic3r/GUI/ConfigManipulation.cpp:158
 msgid ""
 "Supports work better, if the following feature is enabled:\n"
 "- Detect bridging perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:162
+#: src/slic3r/GUI/ConfigManipulation.cpp:161
 msgid "Shall I adjust those settings for supports?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:163
+#: src/slic3r/GUI/ConfigManipulation.cpp:162
 msgid "Support Generator"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:198
+#: src/slic3r/GUI/ConfigManipulation.cpp:207
 msgid "The %1% infill pattern is not supposed to work at 100%% density."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:201
+#: src/slic3r/GUI/ConfigManipulation.cpp:209
 msgid "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:202
+#: src/slic3r/GUI/ConfigManipulation.cpp:210
 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93
-#: src/slic3r/GUI/GUI_ObjectList.cpp:668 src/slic3r/GUI/Plater.cpp:389
-#: src/slic3r/GUI/Tab.cpp:1432 src/slic3r/GUI/Tab.cpp:1434
-#: src/libslic3r/PrintConfig.cpp:259 src/libslic3r/PrintConfig.cpp:472
-#: src/libslic3r/PrintConfig.cpp:496 src/libslic3r/PrintConfig.cpp:848
-#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:899
-#: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1086
-#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1172
-#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1928
-#: src/libslic3r/PrintConfig.cpp:1945
+#: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:388
+#: src/slic3r/GUI/Tab.cpp:1420 src/slic3r/GUI/Tab.cpp:1422
+#: src/libslic3r/PrintConfig.cpp:244 src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:479 src/libslic3r/PrintConfig.cpp:819
+#: src/libslic3r/PrintConfig.cpp:833 src/libslic3r/PrintConfig.cpp:870
+#: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1044
+#: src/libslic3r/PrintConfig.cpp:1062 src/libslic3r/PrintConfig.cpp:1081
+#: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1834
+#: src/libslic3r/PrintConfig.cpp:1851
 msgid "Infill"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:320
+#: src/slic3r/GUI/ConfigManipulation.cpp:322
 msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:322
+#: src/slic3r/GUI/ConfigManipulation.cpp:324
 msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:333
+#: src/slic3r/GUI/ConfigManipulation.cpp:335
 msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:335
+#: src/slic3r/GUI/ConfigManipulation.cpp:337
 msgid "Invalid pinhead diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
 msgid "Upgrade"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
 msgid "Downgrade"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
 msgid "Before roll back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:143
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 src/libslic3r/PrintConfig.cpp:139
 msgid "User"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
-#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/ExtrusionEntity.cpp:309
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+#: src/slic3r/GUI/GUI_Preview.cpp:294 src/libslic3r/ExtrusionEntity.cpp:309
 msgid "Unknown"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
 msgid "Active"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1298
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1257
 msgid "print"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1300
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1259
 msgid "SLA print"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:696
-#: src/libslic3r/Preset.cpp:1301
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/slic3r/GUI/Plater.cpp:688
+#: src/libslic3r/Preset.cpp:1260
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1302
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1261
 msgid "printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1304
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1293
 msgid "vendor"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
 msgid "version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
 msgid "min PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
 msgid "max PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
 msgid "model"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
 msgid "variants"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:83
 #, possible-c-format
 msgid "Incompatible with this %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86
 msgid "Activate"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112
 msgid "Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:242
+#: src/slic3r/GUI/ConfigWizard.cpp:240
 msgid "nozzle"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:246
+#: src/slic3r/GUI/ConfigWizard.cpp:244
 msgid "Alternate nozzles:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:310
+#: src/slic3r/GUI/ConfigWizard.cpp:308
 msgid "All standard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:310
+#: src/slic3r/GUI/ConfigWizard.cpp:308
 msgid "Standard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:311 src/slic3r/GUI/ConfigWizard.cpp:605
-#: src/slic3r/GUI/Tab.cpp:3565 src/slic3r/GUI/UnsavedChangesDialog.cpp:933
+#: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/ConfigWizard.cpp:599
+#: src/slic3r/GUI/Tab.cpp:3528 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
 msgid "All"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:312 src/slic3r/GUI/ConfigWizard.cpp:606
-#: src/slic3r/GUI/DoubleSlider.cpp:1859 src/slic3r/GUI/Plater.cpp:361
-#: src/slic3r/GUI/Plater.cpp:504
+#: src/slic3r/GUI/ConfigWizard.cpp:310 src/slic3r/GUI/ConfigWizard.cpp:600
+#: src/slic3r/GUI/Plater.cpp:360 src/slic3r/GUI/Plater.cpp:500
 msgid "None"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:452
+#: src/slic3r/GUI/ConfigWizard.cpp:446
 #, possible-c-format
 msgid "Welcome to the %s Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:454
+#: src/slic3r/GUI/ConfigWizard.cpp:448
 #, possible-c-format
 msgid "Welcome to the %s Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:456
+#: src/slic3r/GUI/ConfigWizard.cpp:450
 msgid "Welcome"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:458
+#: src/slic3r/GUI/ConfigWizard.cpp:452
 #, possible-c-format
 msgid ""
 "Hello, welcome to %s! This %s helps you with the initial configuration; just "
 "a few settings and you will be ready to print."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:463
+#: src/slic3r/GUI/ConfigWizard.cpp:457
 msgid "Remove user profiles (a snapshot will be taken beforehand)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:506
+#: src/slic3r/GUI/ConfigWizard.cpp:500
 #, possible-c-format
 msgid "%s Family"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:594
+#: src/slic3r/GUI/ConfigWizard.cpp:588
 msgid "Printer:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:596
+#: src/slic3r/GUI/ConfigWizard.cpp:590
 msgid "Vendor:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:597
+#: src/slic3r/GUI/ConfigWizard.cpp:591
 msgid "Profile:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:669 src/slic3r/GUI/ConfigWizard.cpp:819
-#: src/slic3r/GUI/ConfigWizard.cpp:880 src/slic3r/GUI/ConfigWizard.cpp:1017
+#: src/slic3r/GUI/ConfigWizard.cpp:663 src/slic3r/GUI/ConfigWizard.cpp:813
+#: src/slic3r/GUI/ConfigWizard.cpp:874 src/slic3r/GUI/ConfigWizard.cpp:1011
 msgid "(All)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:698
+#: src/slic3r/GUI/ConfigWizard.cpp:692
 msgid ""
 "Filaments marked with <b>*</b> are <b>not</b> compatible with some installed "
 "printers."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:701
+#: src/slic3r/GUI/ConfigWizard.cpp:695
 msgid "All installed printers are compatible with the selected filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:721
+#: src/slic3r/GUI/ConfigWizard.cpp:715
 msgid ""
 "Only the following installed printers are compatible with the selected "
 "filament:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1107
+#: src/slic3r/GUI/ConfigWizard.cpp:1101
 msgid "Custom Printer Setup"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1107
+#: src/slic3r/GUI/ConfigWizard.cpp:1101
 msgid "Custom Printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1109
+#: src/slic3r/GUI/ConfigWizard.cpp:1103
 msgid "Define a custom printer profile"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1111
+#: src/slic3r/GUI/ConfigWizard.cpp:1105
 msgid "Custom profile name:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1136
+#: src/slic3r/GUI/ConfigWizard.cpp:1130
 msgid "Automatic updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1136
+#: src/slic3r/GUI/ConfigWizard.cpp:1130
 msgid "Updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1144 src/slic3r/GUI/Preferences.cpp:94
+#: src/slic3r/GUI/ConfigWizard.cpp:1138 src/slic3r/GUI/Preferences.cpp:81
 msgid "Check for application updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1148
+#: src/slic3r/GUI/ConfigWizard.cpp:1142
 #, possible-c-format
 msgid ""
 "If enabled, %s checks for new application versions online. When a new "
@@ -680,11 +676,11 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1154 src/slic3r/GUI/Preferences.cpp:129
+#: src/slic3r/GUI/ConfigWizard.cpp:1148 src/slic3r/GUI/Preferences.cpp:97
 msgid "Update built-in Presets automatically"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1158
+#: src/slic3r/GUI/ConfigWizard.cpp:1152
 #, possible-c-format
 msgid ""
 "If enabled, %s downloads updates of built-in system presets in the "
@@ -693,30 +689,30 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1161
+#: src/slic3r/GUI/ConfigWizard.cpp:1155
 msgid ""
 "Updates are never applied without user's consent and never overwrite user's "
 "customized settings."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1166
+#: src/slic3r/GUI/ConfigWizard.cpp:1160
 msgid ""
 "Additionally a backup snapshot of the whole configuration is created before "
 "an update is applied."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1173 src/slic3r/GUI/GUI_ObjectList.cpp:1825
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4567 src/slic3r/GUI/Plater.cpp:3116
-#: src/slic3r/GUI/Plater.cpp:4001 src/slic3r/GUI/Plater.cpp:4032
+#: src/slic3r/GUI/ConfigWizard.cpp:1167 src/slic3r/GUI/GUI_ObjectList.cpp:1793
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3120
+#: src/slic3r/GUI/Plater.cpp:3953 src/slic3r/GUI/Plater.cpp:3982
 msgid "Reload from disk"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1176
+#: src/slic3r/GUI/ConfigWizard.cpp:1170
 msgid ""
 "Export full pathnames of models and parts sources into 3mf and amf files"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1180
+#: src/slic3r/GUI/ConfigWizard.cpp:1174
 msgid ""
 "If enabled, allows the Reload from disk command to automatically find and "
 "load the files when invoked.\n"
@@ -724,23 +720,11 @@ msgid ""
 "using an open file dialog."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1190
-msgid "Files association"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1192 src/slic3r/GUI/Preferences.cpp:112
-msgid "Associate .3mf files to PrusaSlicer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1193 src/slic3r/GUI/Preferences.cpp:119
-msgid "Associate .stl files to PrusaSlicer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1204
+#: src/slic3r/GUI/ConfigWizard.cpp:1182
 msgid "View mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1206
+#: src/slic3r/GUI/ConfigWizard.cpp:1184
 msgid ""
 "PrusaSlicer's user interfaces comes in three variants:\n"
 "Simple, Advanced, and Expert.\n"
@@ -749,290 +733,285 @@ msgid ""
 "fine-tuning, they are suitable for advanced and expert users, respectively."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1211
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
 msgid "Simple mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1212
+#: src/slic3r/GUI/ConfigWizard.cpp:1190
 msgid "Advanced mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1213
+#: src/slic3r/GUI/ConfigWizard.cpp:1191
 msgid "Expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1219
+#: src/slic3r/GUI/ConfigWizard.cpp:1197
 msgid "The size of the object can be specified in inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1220
+#: src/slic3r/GUI/ConfigWizard.cpp:1198
 msgid "Use inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1254
+#: src/slic3r/GUI/ConfigWizard.cpp:1232
 msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1258
+#: src/slic3r/GUI/ConfigWizard.cpp:1236
 #, possible-c-format
 msgid "Pick another vendor supported by %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1289
+#: src/slic3r/GUI/ConfigWizard.cpp:1267
 msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1289 src/slic3r/GUI/Tab.cpp:2172
+#: src/slic3r/GUI/ConfigWizard.cpp:1267 src/slic3r/GUI/Tab.cpp:2145
 msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1293
+#: src/slic3r/GUI/ConfigWizard.cpp:1271
 msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1327
+#: src/slic3r/GUI/ConfigWizard.cpp:1305
 msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1330
+#: src/slic3r/GUI/ConfigWizard.cpp:1308
 msgid "Set the shape of your printer's bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1350
+#: src/slic3r/GUI/ConfigWizard.cpp:1328
 msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1350
+#: src/slic3r/GUI/ConfigWizard.cpp:1328
 msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1364
+#: src/slic3r/GUI/ConfigWizard.cpp:1342
 msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1367
+#: src/slic3r/GUI/ConfigWizard.cpp:1345
 msgid "Nozzle Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1377
+#: src/slic3r/GUI/ConfigWizard.cpp:1355
 msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1378
+#: src/slic3r/GUI/ConfigWizard.cpp:1356
 msgid ""
 "Good precision is required, so use a caliper and do multiple measurements "
 "along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1381
+#: src/slic3r/GUI/ConfigWizard.cpp:1359
 msgid "Filament Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1415
+#: src/slic3r/GUI/ConfigWizard.cpp:1393
 msgid "Nozzle and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1415
+#: src/slic3r/GUI/ConfigWizard.cpp:1393
 msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1431
+#: src/slic3r/GUI/ConfigWizard.cpp:1409
 msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1432
+#: src/slic3r/GUI/ConfigWizard.cpp:1410
 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1435
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
 msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1436 src/slic3r/GUI/ConfigWizard.cpp:1450
-#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:950
-#: src/libslic3r/PrintConfig.cpp:994 src/libslic3r/PrintConfig.cpp:2294
+#: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/ConfigWizard.cpp:1428
+#: src/libslic3r/PrintConfig.cpp:187 src/libslic3r/PrintConfig.cpp:919
+#: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:2200
 msgid "°C"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1445
+#: src/slic3r/GUI/ConfigWizard.cpp:1423
 msgid ""
 "Enter the bed temperature needed for getting your filament to stick to your "
 "heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1446
+#: src/slic3r/GUI/ConfigWizard.cpp:1424
 msgid ""
 "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
 "no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1449
+#: src/slic3r/GUI/ConfigWizard.cpp:1427
 msgid "Bed Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1909 src/slic3r/GUI/ConfigWizard.cpp:2582
+#: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2534
 msgid "Filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1909 src/slic3r/GUI/ConfigWizard.cpp:2584
+#: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2536
 msgid "SLA Materials"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1963
+#: src/slic3r/GUI/ConfigWizard.cpp:1936
 msgid "FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1968
+#: src/slic3r/GUI/ConfigWizard.cpp:1941
 msgid "SLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2274 src/slic3r/GUI/DoubleSlider.cpp:2245
-#: src/slic3r/GUI/DoubleSlider.cpp:2265 src/slic3r/GUI/GUI.cpp:244
+#: src/slic3r/GUI/ConfigWizard.cpp:2247 src/slic3r/GUI/DoubleSlider.cpp:2133
+#: src/slic3r/GUI/DoubleSlider.cpp:2153 src/slic3r/GUI/GUI.cpp:244
 msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2295
+#: src/slic3r/GUI/ConfigWizard.cpp:2267
 msgid "The following FFF printer models have no filament selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2299
+#: src/slic3r/GUI/ConfigWizard.cpp:2271
 msgid "Do you want to select default filaments for these FFF printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2313
+#: src/slic3r/GUI/ConfigWizard.cpp:2285
 msgid "The following SLA printer models have no materials selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2317
+#: src/slic3r/GUI/ConfigWizard.cpp:2289
 msgid "Do you want to select default SLA materials for these printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2545
+#: src/slic3r/GUI/ConfigWizard.cpp:2497
 msgid "Select all standard printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2548
+#: src/slic3r/GUI/ConfigWizard.cpp:2500
 msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2549
+#: src/slic3r/GUI/ConfigWizard.cpp:2501
 msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2550
+#: src/slic3r/GUI/ConfigWizard.cpp:2502
 msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2551 src/slic3r/GUI/FirmwareDialog.cpp:151
+#: src/slic3r/GUI/ConfigWizard.cpp:2503 src/slic3r/GUI/FirmwareDialog.cpp:151
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:656
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
 msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2564
+#: src/slic3r/GUI/ConfigWizard.cpp:2516
 msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2567
+#: src/slic3r/GUI/ConfigWizard.cpp:2519
 msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2582
+#: src/slic3r/GUI/ConfigWizard.cpp:2534
 msgid "Filament Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2582 src/slic3r/GUI/ConfigWizard.cpp:2584
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
+#: src/slic3r/GUI/ConfigWizard.cpp:2534 src/slic3r/GUI/ConfigWizard.cpp:2536
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
 msgid "Type:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2584
+#: src/slic3r/GUI/ConfigWizard.cpp:2536
 msgid "SLA Material Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2701
+#: src/slic3r/GUI/ConfigWizard.cpp:2634
 msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2702
+#: src/slic3r/GUI/ConfigWizard.cpp:2635
 msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2704
+#: src/slic3r/GUI/ConfigWizard.cpp:2637
 msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2705
+#: src/slic3r/GUI/ConfigWizard.cpp:2638
 msgid "Configuration &Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:97
+#: src/slic3r/GUI/DoubleSlider.cpp:106
 msgid "Place bearings in slots and resume printing"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1224
+#: src/slic3r/GUI/DoubleSlider.cpp:1075
 msgid "One layer mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1226
+#: src/slic3r/GUI/DoubleSlider.cpp:1077
 msgid "Discard all custom changes"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1230 src/slic3r/GUI/DoubleSlider.cpp:1995
+#: src/slic3r/GUI/DoubleSlider.cpp:1082 src/slic3r/GUI/DoubleSlider.cpp:1863
 msgid "Jump to move"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1233
+#: src/slic3r/GUI/DoubleSlider.cpp:1086
 #, possible-c-format
-msgid ""
-"Jump to height %s\n"
-"Set ruler mode\n"
-"or Set extruder sequence for the entire print"
+msgid "Jump to height %s or Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1236
-#, possible-c-format
-msgid ""
-"Jump to height %s\n"
-"or Set ruler mode"
-msgstr ""
+#: src/slic3r/GUI/DoubleSlider.cpp:1088 src/slic3r/GUI/DoubleSlider.cpp:1732
+#: src/slic3r/GUI/DoubleSlider.cpp:1863 src/slic3r/GUI/DoubleSlider.cpp:1867
+msgid "Jump to height"
+msgstr "קפוץ לגובה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1241
+#: src/slic3r/GUI/DoubleSlider.cpp:1094
 msgid "Edit current color - Right click the colored slider segment"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1251
+#: src/slic3r/GUI/DoubleSlider.cpp:1104
 msgid "Print mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1265
+#: src/slic3r/GUI/DoubleSlider.cpp:1118
 msgid "Add extruder change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1267
+#: src/slic3r/GUI/DoubleSlider.cpp:1120
 msgid ""
 "Add color change - Left click for predefined color or Shift + Left click for "
 "custom color selection"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1269
+#: src/slic3r/GUI/DoubleSlider.cpp:1122
 msgid "Add color change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1270
+#: src/slic3r/GUI/DoubleSlider.cpp:1123
 msgid "or press \"+\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1272
+#: src/slic3r/GUI/DoubleSlider.cpp:1125
 msgid "Add another code - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1273
+#: src/slic3r/GUI/DoubleSlider.cpp:1126
 msgid "Add another code - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1279
+#: src/slic3r/GUI/DoubleSlider.cpp:1132
 msgid ""
 "The sequential print is on.\n"
 "It's impossible to apply any custom G-code for objects printing "
@@ -1040,326 +1019,283 @@ msgid ""
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1288
+#: src/slic3r/GUI/DoubleSlider.cpp:1141
 msgid "Color change (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1289
+#: src/slic3r/GUI/DoubleSlider.cpp:1142
 msgid "Color change (\"%1%\") for Extruder %2%"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1291
+#: src/slic3r/GUI/DoubleSlider.cpp:1144
 msgid "Pause print (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1293
+#: src/slic3r/GUI/DoubleSlider.cpp:1146
 msgid "Custom template (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1295
+#: src/slic3r/GUI/DoubleSlider.cpp:1148
 msgid "Extruder (tool) is changed to Extruder \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1302
+#: src/slic3r/GUI/DoubleSlider.cpp:1155
 msgid "Note"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1304
+#: src/slic3r/GUI/DoubleSlider.cpp:1157
 msgid ""
 "G-code associated to this tick mark is in a conflict with print mode.\n"
 "Editing it will cause changes of Slider data."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1307
+#: src/slic3r/GUI/DoubleSlider.cpp:1160
 msgid ""
 "There is a color change for extruder that won't be used till the end of "
 "print job.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1310
+#: src/slic3r/GUI/DoubleSlider.cpp:1163
 msgid ""
 "There is an extruder change set to the same extruder.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1313
+#: src/slic3r/GUI/DoubleSlider.cpp:1166
 msgid ""
 "There is a color change for extruder that has not been used before.\n"
 "Check your settings to avoid redundant color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1318
+#: src/slic3r/GUI/DoubleSlider.cpp:1171
 msgid "Delete tick mark - Left click or press \"-\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1320
+#: src/slic3r/GUI/DoubleSlider.cpp:1173
 msgid "Edit tick mark - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1321
+#: src/slic3r/GUI/DoubleSlider.cpp:1174
 msgid "Edit tick mark - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1417 src/slic3r/GUI/DoubleSlider.cpp:1451
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1864
+#: src/slic3r/GUI/DoubleSlider.cpp:1274 src/slic3r/GUI/DoubleSlider.cpp:1308
+#: src/slic3r/GUI/GLCanvas3D.cpp:980 src/slic3r/GUI/GUI_ObjectList.cpp:1832
+#: src/slic3r/GUI/Tab.cpp:2500
 #, possible-c-format
 msgid "Extruder %d"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1418 src/slic3r/GUI/GUI_ObjectList.cpp:1865
+#: src/slic3r/GUI/DoubleSlider.cpp:1275 src/slic3r/GUI/GUI_ObjectList.cpp:1833
 msgid "active"
-msgstr ""
+msgstr "פעיל"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1427
+#: src/slic3r/GUI/DoubleSlider.cpp:1284
 msgid "Switch code to Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1427 src/slic3r/GUI/GUI_ObjectList.cpp:1832
+#: src/slic3r/GUI/DoubleSlider.cpp:1284 src/slic3r/GUI/GUI_ObjectList.cpp:1800
 msgid "Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1428
+#: src/slic3r/GUI/DoubleSlider.cpp:1285
 msgid "Change extruder (N/A)"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1430
+#: src/slic3r/GUI/DoubleSlider.cpp:1287
 msgid "Use another extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1452
+#: src/slic3r/GUI/DoubleSlider.cpp:1309
 msgid "used"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1460
+#: src/slic3r/GUI/DoubleSlider.cpp:1317
 msgid "Switch code to Color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1461
+#: src/slic3r/GUI/DoubleSlider.cpp:1318
 msgid "Add color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1797
+#: src/slic3r/GUI/DoubleSlider.cpp:1676
 msgid "Add color change"
-msgstr ""
+msgstr "הוספת שינוי צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1808
+#: src/slic3r/GUI/DoubleSlider.cpp:1686
 msgid "Add pause print"
-msgstr ""
+msgstr "הוספת השהייה להדפסה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1812
+#: src/slic3r/GUI/DoubleSlider.cpp:1690
 msgid "Add custom template"
-msgstr ""
+msgstr "הוסף תבנית מותאמת אישית"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1815
+#: src/slic3r/GUI/DoubleSlider.cpp:1693
 msgid "Add custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1833
+#: src/slic3r/GUI/DoubleSlider.cpp:1711
 msgid "Edit color"
-msgstr ""
+msgstr "ערוך צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1834
+#: src/slic3r/GUI/DoubleSlider.cpp:1712
 msgid "Edit pause print message"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1835
+#: src/slic3r/GUI/DoubleSlider.cpp:1713
 msgid "Edit custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1841
+#: src/slic3r/GUI/DoubleSlider.cpp:1719
 msgid "Delete color change"
-msgstr ""
+msgstr "מחק שינוי צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1842
+#: src/slic3r/GUI/DoubleSlider.cpp:1720
 msgid "Delete tool change"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1843
+#: src/slic3r/GUI/DoubleSlider.cpp:1721
 msgid "Delete pause print"
-msgstr ""
+msgstr "מחק את השהיית ההדפסה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1844
+#: src/slic3r/GUI/DoubleSlider.cpp:1722
 msgid "Delete custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1854 src/slic3r/GUI/DoubleSlider.cpp:1995
-msgid "Jump to height"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1859
-msgid "Hide ruler"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1863
-msgid "Show object height"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1863
-msgid "Show object height on the ruler"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1867
-msgid "Show estimated print time"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1867
-msgid "Show estimated print time on the ruler"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1871
-msgid "Ruler mode"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1871
-msgid "Set ruler mode"
-msgstr ""
-
-#: src/slic3r/GUI/DoubleSlider.cpp:1876
+#: src/slic3r/GUI/DoubleSlider.cpp:1739
 msgid "Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1962
+#: src/slic3r/GUI/DoubleSlider.cpp:1825
 msgid "Enter custom G-code used on current layer"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1963
+#: src/slic3r/GUI/DoubleSlider.cpp:1826
 msgid "Custom G-code on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1978
+#: src/slic3r/GUI/DoubleSlider.cpp:1841
 msgid "Enter short message shown on Printer display when a print is paused"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1979
+#: src/slic3r/GUI/DoubleSlider.cpp:1842
 msgid "Message for pause print on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1994
+#: src/slic3r/GUI/DoubleSlider.cpp:1862
 msgid "Enter the move you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1994
+#: src/slic3r/GUI/DoubleSlider.cpp:1862 src/slic3r/GUI/DoubleSlider.cpp:1866
 msgid "Enter the height you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2239
+#: src/slic3r/GUI/DoubleSlider.cpp:2127
 msgid "The last color change data was saved for a single extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2240 src/slic3r/GUI/DoubleSlider.cpp:2255
+#: src/slic3r/GUI/DoubleSlider.cpp:2128 src/slic3r/GUI/DoubleSlider.cpp:2143
 msgid "The last color change data was saved for a multi extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2242
+#: src/slic3r/GUI/DoubleSlider.cpp:2130
 msgid "Your current changes will delete all saved color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2243 src/slic3r/GUI/DoubleSlider.cpp:2263
+#: src/slic3r/GUI/DoubleSlider.cpp:2131 src/slic3r/GUI/DoubleSlider.cpp:2151
 msgid "Are you sure you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2256
+#: src/slic3r/GUI/DoubleSlider.cpp:2144
 msgid ""
 "Select YES if you want to delete all saved tool changes, \n"
 "NO if you want all tool changes switch to color changes, \n"
 "or CANCEL to leave it unchanged."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2259
+#: src/slic3r/GUI/DoubleSlider.cpp:2147
 msgid "Do you want to delete all saved tool changes?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2261
+#: src/slic3r/GUI/DoubleSlider.cpp:2149
 msgid ""
 "The last color change data was saved for a multi extruder printing with tool "
 "changes for whole print."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2262
+#: src/slic3r/GUI/DoubleSlider.cpp:2150
 msgid "Your current changes will delete all saved extruder (tool) changes."
 msgstr ""
 
-#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:512
-#: src/slic3r/GUI/GUI_ObjectList.cpp:524 src/slic3r/GUI/GUI_ObjectList.cpp:1033
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4582
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4592
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4627
+#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496
+#: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4454
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4499
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:499 src/libslic3r/PrintConfig.cpp:552
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:499
 msgid "default"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:24
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
 msgid "Set extruder sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:40
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
 msgid "Set extruder change for every"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53
-#: src/libslic3r/PrintConfig.cpp:418 src/libslic3r/PrintConfig.cpp:1089
-#: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1883
-#: src/libslic3r/PrintConfig.cpp:1950 src/libslic3r/PrintConfig.cpp:2157
-#: src/libslic3r/PrintConfig.cpp:2203
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
+#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:1047
+#: src/libslic3r/PrintConfig.cpp:1624 src/libslic3r/PrintConfig.cpp:1789
+#: src/libslic3r/PrintConfig.cpp:1856 src/libslic3r/PrintConfig.cpp:2063
+#: src/libslic3r/PrintConfig.cpp:2109
 msgid "layers"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:137
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
 msgid "Set extruder(tool) sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:183
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
 msgid "Remove extruder from sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:193
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
 msgid "Add extruder to sequence"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:197
+#: src/slic3r/GUI/Field.cpp:184
 msgid "default value"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:200
+#: src/slic3r/GUI/Field.cpp:187
 msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:211 src/slic3r/GUI/OptionsGroup.cpp:781
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:886
+#: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:774
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
 msgid "N/A"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:233
+#: src/slic3r/GUI/Field.cpp:220
 #, possible-c-format
 msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:253 src/slic3r/GUI/Field.cpp:307
-#: src/slic3r/GUI/Field.cpp:1520 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
+#: src/slic3r/GUI/Field.cpp:240 src/slic3r/GUI/Field.cpp:271
+#: src/slic3r/GUI/Field.cpp:1417 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
 msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:264
-#, possible-c-format
-msgid ""
-"Input value is out of range\n"
-"Are you sure that %s is a correct value and that you want to continue?"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:266 src/slic3r/GUI/Field.cpp:326
-msgid "Parameter validation"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:279 src/slic3r/GUI/Field.cpp:373
-#: src/slic3r/GUI/Field.cpp:1532
+#: src/slic3r/GUI/Field.cpp:249 src/slic3r/GUI/Field.cpp:1429
 msgid "Input value is out of range"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:323
+#: src/slic3r/GUI/Field.cpp:285
 #, possible-c-format
 msgid ""
 "Do you mean %s%% instead of %s %s?\n"
@@ -1367,10 +1303,8 @@ msgid ""
 "or NO if you are sure that %s %s is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:381
-msgid ""
-"Invalid input format. Expected vector of dimensions in the following format: "
-"\"%1%\""
+#: src/slic3r/GUI/Field.cpp:288
+msgid "Parameter validation"
 msgstr ""
 
 #: src/slic3r/GUI/FirmwareDialog.cpp:150
@@ -1480,8 +1414,8 @@ msgid "Advanced: Output log"
 msgstr ""
 
 #: src/slic3r/GUI/FirmwareDialog.cpp:852
-#: src/slic3r/GUI/Mouse3DController.cpp:551
-#: src/slic3r/GUI/PrintHostDialogs.cpp:189
+#: src/slic3r/GUI/Mouse3DController.cpp:552
+#: src/slic3r/GUI/PrintHostDialogs.cpp:187
 msgid "Close"
 msgstr ""
 
@@ -1499,530 +1433,527 @@ msgstr ""
 msgid "Cancelling..."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:239
+#: src/slic3r/GUI/GCodeViewer.cpp:221
 msgid "Tool position"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1016
+#: src/slic3r/GUI/GCodeViewer.cpp:965
 msgid "Generating toolpaths"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1405
+#: src/slic3r/GUI/GCodeViewer.cpp:1356
 msgid "Generating vertex buffer"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1496
+#: src/slic3r/GUI/GCodeViewer.cpp:1437
 msgid "Generating index buffers"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2225
+#: src/slic3r/GUI/GCodeViewer.cpp:2163
 msgid "Click to hide"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2225
+#: src/slic3r/GUI/GCodeViewer.cpp:2163
 msgid "Click to show"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2337
+#: src/slic3r/GUI/GCodeViewer.cpp:2275
 msgid "up to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2343
+#: src/slic3r/GUI/GCodeViewer.cpp:2281
 msgid "above"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2351
+#: src/slic3r/GUI/GCodeViewer.cpp:2289
 msgid "from"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2351
+#: src/slic3r/GUI/GCodeViewer.cpp:2289
 msgid "to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2379 src/slic3r/GUI/GCodeViewer.cpp:2387
-#: src/slic3r/GUI/GUI_Preview.cpp:214 src/slic3r/GUI/GUI_Preview.cpp:533
-#: src/slic3r/GUI/GUI_Preview.cpp:942
+#: src/slic3r/GUI/GCodeViewer.cpp:2317 src/slic3r/GUI/GCodeViewer.cpp:2325
+#: src/slic3r/GUI/GUI_Preview.cpp:270 src/slic3r/GUI/GUI_Preview.cpp:788
 msgid "Feature type"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2379 src/slic3r/GUI/GCodeViewer.cpp:2387
+#: src/slic3r/GUI/GCodeViewer.cpp:2317 src/slic3r/GUI/GCodeViewer.cpp:2325
 #: src/slic3r/GUI/RammingChart.cpp:76
 msgid "Time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2387
+#: src/slic3r/GUI/GCodeViewer.cpp:2325
 msgid "Percentage"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2390
+#: src/slic3r/GUI/GCodeViewer.cpp:2328
 msgid "Height (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2391
+#: src/slic3r/GUI/GCodeViewer.cpp:2329
 msgid "Width (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2392
+#: src/slic3r/GUI/GCodeViewer.cpp:2330
 msgid "Speed (mm/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2393
+#: src/slic3r/GUI/GCodeViewer.cpp:2331
 msgid "Fan Speed (%)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2394
+#: src/slic3r/GUI/GCodeViewer.cpp:2332
 msgid "Volumetric flow rate (mm³/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2395 src/slic3r/GUI/GUI_Preview.cpp:220
-#: src/slic3r/GUI/GUI_Preview.cpp:326 src/slic3r/GUI/GUI_Preview.cpp:471
-#: src/slic3r/GUI/GUI_Preview.cpp:532 src/slic3r/GUI/GUI_Preview.cpp:878
-#: src/slic3r/GUI/GUI_Preview.cpp:942
+#: src/slic3r/GUI/GCodeViewer.cpp:2333 src/slic3r/GUI/GUI_Preview.cpp:276
+#: src/slic3r/GUI/GUI_Preview.cpp:447 src/slic3r/GUI/GUI_Preview.cpp:694
+#: src/slic3r/GUI/GUI_Preview.cpp:787 src/slic3r/GUI/GUI_Preview.cpp:1266
 msgid "Tool"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2396 src/slic3r/GUI/GUI_Preview.cpp:221
-#: src/slic3r/GUI/GUI_Preview.cpp:530 src/slic3r/GUI/GUI_Preview.cpp:941
+#: src/slic3r/GUI/GCodeViewer.cpp:2334 src/slic3r/GUI/GUI_Preview.cpp:277
+#: src/slic3r/GUI/GUI_Preview.cpp:785
 msgid "Color Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2432 src/slic3r/GUI/GCodeViewer.cpp:2467
-#: src/slic3r/GUI/GCodeViewer.cpp:2472 src/slic3r/GUI/GUI_ObjectList.cpp:312
-#: src/slic3r/GUI/wxExtensions.cpp:519 src/libslic3r/PrintConfig.cpp:547
+#: src/slic3r/GUI/GCodeViewer.cpp:2370 src/slic3r/GUI/GCodeViewer.cpp:2405
+#: src/slic3r/GUI/GCodeViewer.cpp:2410 src/slic3r/GUI/GUI_ObjectList.cpp:296
+#: src/slic3r/GUI/wxExtensions.cpp:515 src/libslic3r/PrintConfig.cpp:530
 msgid "Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2443
+#: src/slic3r/GUI/GCodeViewer.cpp:2381
 msgid "Default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2467
+#: src/slic3r/GUI/GCodeViewer.cpp:2405
 msgid "default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2562 src/slic3r/GUI/GCodeViewer.cpp:2608
+#: src/slic3r/GUI/GCodeViewer.cpp:2500 src/slic3r/GUI/GCodeViewer.cpp:2546
 msgid "Color change"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2581 src/slic3r/GUI/GCodeViewer.cpp:2606
+#: src/slic3r/GUI/GCodeViewer.cpp:2519 src/slic3r/GUI/GCodeViewer.cpp:2544
 msgid "Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2607 src/slic3r/GUI/GCodeViewer.cpp:2624
+#: src/slic3r/GUI/GCodeViewer.cpp:2545 src/slic3r/GUI/GCodeViewer.cpp:2562
+#: src/slic3r/GUI/Plater.cpp:1201
 msgid "Pause"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2612 src/slic3r/GUI/GCodeViewer.cpp:2615
+#: src/slic3r/GUI/GCodeViewer.cpp:2550 src/slic3r/GUI/GCodeViewer.cpp:2553
 msgid "Event"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2612 src/slic3r/GUI/GCodeViewer.cpp:2615
+#: src/slic3r/GUI/GCodeViewer.cpp:2550 src/slic3r/GUI/GCodeViewer.cpp:2553
 msgid "Remaining time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2615
+#: src/slic3r/GUI/GCodeViewer.cpp:2553
 msgid "Duration"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2650 src/slic3r/GUI/GUI_Preview.cpp:1023
-#: src/libslic3r/PrintConfig.cpp:2380
+#: src/slic3r/GUI/GCodeViewer.cpp:2588 src/slic3r/GUI/GUI_Preview.cpp:330
+#: src/slic3r/GUI/GUI_Preview.cpp:1466 src/libslic3r/PrintConfig.cpp:2286
 msgid "Travel"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2653
+#: src/slic3r/GUI/GCodeViewer.cpp:2591
 msgid "Movement"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2654
+#: src/slic3r/GUI/GCodeViewer.cpp:2592
 msgid "Extrusion"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2655 src/slic3r/GUI/Tab.cpp:1694
-#: src/slic3r/GUI/Tab.cpp:2582
+#: src/slic3r/GUI/GCodeViewer.cpp:2593 src/slic3r/GUI/Tab.cpp:1680
+#: src/slic3r/GUI/Tab.cpp:2550
 msgid "Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2672 src/slic3r/GUI/GCodeViewer.cpp:2675
-#: src/slic3r/GUI/GUI_Preview.cpp:1024
-msgid "Wipe"
-msgstr ""
-
-#: src/slic3r/GUI/GCodeViewer.cpp:2706 src/slic3r/GUI/GUI_Preview.cpp:248
-#: src/slic3r/GUI/GUI_Preview.cpp:262
+#: src/slic3r/GUI/GCodeViewer.cpp:2624 src/slic3r/GUI/GUI_Preview.cpp:315
+#: src/slic3r/GUI/GUI_Preview.cpp:328
 msgid "Options"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2709 src/slic3r/GUI/GUI_Preview.cpp:1025
+#: src/slic3r/GUI/GCodeViewer.cpp:2627 src/slic3r/GUI/GUI_Preview.cpp:331
+#: src/slic3r/GUI/GUI_Preview.cpp:1467
 msgid "Retractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2710 src/slic3r/GUI/GUI_Preview.cpp:1026
+#: src/slic3r/GUI/GCodeViewer.cpp:2628 src/slic3r/GUI/GUI_Preview.cpp:332
+#: src/slic3r/GUI/GUI_Preview.cpp:1468
 msgid "Deretractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2711 src/slic3r/GUI/GUI_Preview.cpp:1027
+#: src/slic3r/GUI/GCodeViewer.cpp:2629 src/slic3r/GUI/GUI_Preview.cpp:1469
 msgid "Tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2712 src/slic3r/GUI/GUI_Preview.cpp:1028
+#: src/slic3r/GUI/GCodeViewer.cpp:2630 src/slic3r/GUI/GUI_Preview.cpp:1470
 msgid "Color changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2713 src/slic3r/GUI/GUI_Preview.cpp:1029
+#: src/slic3r/GUI/GCodeViewer.cpp:2631 src/slic3r/GUI/GUI_Preview.cpp:1471
 msgid "Print pauses"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2714 src/slic3r/GUI/GUI_Preview.cpp:1030
+#: src/slic3r/GUI/GCodeViewer.cpp:2632 src/slic3r/GUI/GUI_Preview.cpp:1472
 msgid "Custom G-codes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2725 src/slic3r/GUI/GCodeViewer.cpp:2749
-#: src/slic3r/GUI/Plater.cpp:697 src/libslic3r/PrintConfig.cpp:117
+#: src/slic3r/GUI/GCodeViewer.cpp:2643 src/slic3r/GUI/GCodeViewer.cpp:2667
+#: src/slic3r/GUI/Plater.cpp:689 src/libslic3r/PrintConfig.cpp:113
 msgid "Printer"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2727 src/slic3r/GUI/GCodeViewer.cpp:2754
-#: src/slic3r/GUI/Plater.cpp:693
+#: src/slic3r/GUI/GCodeViewer.cpp:2645 src/slic3r/GUI/GCodeViewer.cpp:2672
+#: src/slic3r/GUI/Plater.cpp:685
 msgid "Print settings"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2730 src/slic3r/GUI/GCodeViewer.cpp:2760
-#: src/slic3r/GUI/Plater.cpp:694 src/slic3r/GUI/Tab.cpp:1794
-#: src/slic3r/GUI/Tab.cpp:1795
+#: src/slic3r/GUI/GCodeViewer.cpp:2648 src/slic3r/GUI/GCodeViewer.cpp:2678
+#: src/slic3r/GUI/Plater.cpp:686 src/slic3r/GUI/Tab.cpp:1780
+#: src/slic3r/GUI/Tab.cpp:1781
 msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2785 src/slic3r/GUI/GCodeViewer.cpp:2790
-#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1135
-#: src/slic3r/GUI/Plater.cpp:1220
+#: src/slic3r/GUI/GCodeViewer.cpp:2701 src/slic3r/GUI/GCodeViewer.cpp:2706
+#: src/slic3r/GUI/Plater.cpp:241 src/slic3r/GUI/Plater.cpp:1127
+#: src/slic3r/GUI/Plater.cpp:1177 src/slic3r/GUI/Plater.cpp:1198
 msgid "Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2785
+#: src/slic3r/GUI/GCodeViewer.cpp:2701
 msgid "Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2790
+#: src/slic3r/GUI/GCodeViewer.cpp:2706
 msgid "Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2817
+#: src/slic3r/GUI/GCodeViewer.cpp:2733
 msgid "Show stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2821
+#: src/slic3r/GUI/GCodeViewer.cpp:2737
 msgid "Show normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:236 src/slic3r/GUI/GLCanvas3D.cpp:4610
+#: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4965
 msgid "Variable layer height"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:238
+#: src/slic3r/GUI/GLCanvas3D.cpp:230
 msgid "Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:240
+#: src/slic3r/GUI/GLCanvas3D.cpp:232
 msgid "Add detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:242
+#: src/slic3r/GUI/GLCanvas3D.cpp:234
 msgid "Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:244
+#: src/slic3r/GUI/GLCanvas3D.cpp:236
 msgid "Remove detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:246
+#: src/slic3r/GUI/GLCanvas3D.cpp:238
 msgid "Shift + Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:248
+#: src/slic3r/GUI/GLCanvas3D.cpp:240
 msgid "Reset to base"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:250
+#: src/slic3r/GUI/GLCanvas3D.cpp:242
 msgid "Shift + Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:252
+#: src/slic3r/GUI/GLCanvas3D.cpp:244
 msgid "Smoothing"
-msgstr ""
+msgstr "הַחלָקָה"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:254
+#: src/slic3r/GUI/GLCanvas3D.cpp:246
 msgid "Mouse wheel:"
-msgstr ""
+msgstr "גלגלת העכבר:"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:256
+#: src/slic3r/GUI/GLCanvas3D.cpp:248
 msgid "Increase/decrease edit area"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:259
+#: src/slic3r/GUI/GLCanvas3D.cpp:251
 msgid "Adaptive"
-msgstr ""
+msgstr "מסתגל"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:265
+#: src/slic3r/GUI/GLCanvas3D.cpp:257
 msgid "Quality / Speed"
-msgstr ""
+msgstr "איכות / מהירות"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:268
+#: src/slic3r/GUI/GLCanvas3D.cpp:260
 msgid "Higher print quality versus higher print speed."
-msgstr ""
+msgstr "איכות הדפסה גבוהה יותר לעומת מהירות הדפסה גבוהה יותר."
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:279
+#: src/slic3r/GUI/GLCanvas3D.cpp:271
 msgid "Smooth"
-msgstr ""
+msgstr "החלקה"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:285 src/libslic3r/PrintConfig.cpp:571
+#: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:554
 msgid "Radius"
-msgstr ""
+msgstr "קוטר"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:295
+#: src/slic3r/GUI/GLCanvas3D.cpp:287
 msgid "Keep min"
-msgstr ""
+msgstr "שמור מינימום"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:304 src/slic3r/GUI/GLCanvas3D.cpp:4050
+#: src/slic3r/GUI/GLCanvas3D.cpp:296
 msgid "Reset"
-msgstr ""
+msgstr "אִתחוּל"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:566
+#: src/slic3r/GUI/GLCanvas3D.cpp:562
 msgid "Variable layer height - Manual edit"
-msgstr ""
+msgstr "גובה שכבה משתנה - עריכה ידנית"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:634
+#: src/slic3r/GUI/GLCanvas3D.cpp:630
 msgid "An object outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:635
+#: src/slic3r/GUI/GLCanvas3D.cpp:631
 msgid "A toolpath outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:636
+#: src/slic3r/GUI/GLCanvas3D.cpp:632
 msgid "SLA supports outside the print area were detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:637
+#: src/slic3r/GUI/GLCanvas3D.cpp:633
 msgid "Some objects are not visible."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:639
+#: src/slic3r/GUI/GLCanvas3D.cpp:635
 msgid ""
 "An object outside the print area was detected.\n"
 "Resolve the current problem to continue slicing."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:949
+#: src/slic3r/GUI/GLCanvas3D.cpp:907 src/slic3r/GUI/GLCanvas3D.cpp:936
+msgid "Default print color"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:937 src/slic3r/GUI/GLCanvas3D.cpp:946
+#: src/slic3r/GUI/GLCanvas3D.cpp:985
+msgid "Pause print or custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:958
+#, possible-c-format
+msgid "up to %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:962
+#, possible-c-format
+msgid "above %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:966
+#, possible-c-format
+msgid "%.2f - %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:998
+#, possible-c-format
+msgid "Color change for Extruder %d at %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1309
 msgid "Seq."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1455
+#: src/slic3r/GUI/GLCanvas3D.cpp:1776
 msgid "Variable layer height - Reset"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1463
+#: src/slic3r/GUI/GLCanvas3D.cpp:1784
 msgid "Variable layer height - Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1471
+#: src/slic3r/GUI/GLCanvas3D.cpp:1792
 msgid "Variable layer height - Smooth all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1876
+#: src/slic3r/GUI/GLCanvas3D.cpp:2228
 msgid "Mirror Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2746
+#: src/slic3r/GUI/GLCanvas3D.cpp:3191
 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
 msgid "Gizmo-Move"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2832
+#: src/slic3r/GUI/GLCanvas3D.cpp:3275
 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
 msgid "Gizmo-Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3388
+#: src/slic3r/GUI/GLCanvas3D.cpp:3802
 msgid "Move Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3858 src/slic3r/GUI/GLCanvas3D.cpp:4571
+#: src/slic3r/GUI/GLCanvas3D.cpp:4289 src/slic3r/GUI/GLCanvas3D.cpp:4926
 msgid "Switch to Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3859 src/slic3r/GUI/GLCanvas3D.cpp:4571
+#: src/slic3r/GUI/GLCanvas3D.cpp:4290 src/slic3r/GUI/GLCanvas3D.cpp:4926
 msgid "Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3860 src/slic3r/GUI/GLCanvas3D.cpp:4572
+#: src/slic3r/GUI/GLCanvas3D.cpp:4291 src/slic3r/GUI/GLCanvas3D.cpp:4927
 msgid "Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3860 src/slic3r/GUI/GLCanvas3D.cpp:4572
+#: src/slic3r/GUI/GLCanvas3D.cpp:4291 src/slic3r/GUI/GLCanvas3D.cpp:4927
 msgid "Material Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3861 src/slic3r/GUI/GLCanvas3D.cpp:4573
+#: src/slic3r/GUI/GLCanvas3D.cpp:4292 src/slic3r/GUI/GLCanvas3D.cpp:4928
 msgid "Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3909
+#: src/slic3r/GUI/GLCanvas3D.cpp:4348
 msgid "Undo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3909
+#: src/slic3r/GUI/GLCanvas3D.cpp:4348
 msgid "Redo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3930
+#: src/slic3r/GUI/GLCanvas3D.cpp:4369
 #, possible-c-format
 msgid "Undo %1$d Action"
 msgid_plural "Undo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3930
+#: src/slic3r/GUI/GLCanvas3D.cpp:4369
 #, possible-c-format
 msgid "Redo %1$d Action"
 msgid_plural "Redo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3950 src/slic3r/GUI/GLCanvas3D.cpp:4589
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:98 src/slic3r/GUI/Search.cpp:351
+#: src/slic3r/GUI/GLCanvas3D.cpp:4389 src/slic3r/GUI/GLCanvas3D.cpp:4944
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130 src/slic3r/GUI/Search.cpp:426
 msgid "Search"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3964 src/slic3r/GUI/GLCanvas3D.cpp:3972
-#: src/slic3r/GUI/Search.cpp:358
+#: src/slic3r/GUI/GLCanvas3D.cpp:4403 src/slic3r/GUI/GLCanvas3D.cpp:4411
+#: src/slic3r/GUI/Search.cpp:433
 msgid "Enter a search term"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4003
-msgid "Arrange options"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4033
-msgid "Press %1%left mouse button to enter the exact value"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4035
-msgid "Spacing"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4042
-msgid "Enable rotations (slow)"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4060 src/slic3r/GUI/GLCanvas3D.cpp:4481
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Plater.cpp:1648
-msgid "Arrange"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4455
+#: src/slic3r/GUI/GLCanvas3D.cpp:4820
 msgid "Add..."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4463 src/slic3r/GUI/GUI_ObjectList.cpp:1878
-#: src/slic3r/GUI/Plater.cpp:3998 src/slic3r/GUI/Plater.cpp:4022
-#: src/slic3r/GUI/Tab.cpp:3484
+#: src/slic3r/GUI/GLCanvas3D.cpp:4828 src/slic3r/GUI/GUI_ObjectList.cpp:1846
+#: src/slic3r/GUI/Plater.cpp:3950 src/slic3r/GUI/Plater.cpp:3972
+#: src/slic3r/GUI/Tab.cpp:3447
 msgid "Delete"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4472 src/slic3r/GUI/KBShortcutsDialog.cpp:88
-#: src/slic3r/GUI/Plater.cpp:5107
+#: src/slic3r/GUI/GLCanvas3D.cpp:4837 src/slic3r/GUI/KBShortcutsDialog.cpp:124
+#: src/slic3r/GUI/Plater.cpp:4882
 msgid "Delete all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4481 src/slic3r/GUI/KBShortcutsDialog.cpp:121
-msgid "Arrange selection"
+#: src/slic3r/GUI/GLCanvas3D.cpp:4846 src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/Plater.cpp:1633
+msgid "Arrange"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4481
-msgid "Click right mouse button to show arrangement options"
+#: src/slic3r/GUI/GLCanvas3D.cpp:4846 src/slic3r/GUI/KBShortcutsDialog.cpp:152
+msgid "Arrange selection"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4503
+#: src/slic3r/GUI/GLCanvas3D.cpp:4858
 msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4512
+#: src/slic3r/GUI/GLCanvas3D.cpp:4867
 msgid "Paste"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4524 src/slic3r/GUI/Plater.cpp:3857
-#: src/slic3r/GUI/Plater.cpp:3869 src/slic3r/GUI/Plater.cpp:4007
+#: src/slic3r/GUI/GLCanvas3D.cpp:4879 src/slic3r/GUI/Plater.cpp:3809
+#: src/slic3r/GUI/Plater.cpp:3821 src/slic3r/GUI/Plater.cpp:3959
 msgid "Add instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4535 src/slic3r/GUI/Plater.cpp:4009
+#: src/slic3r/GUI/GLCanvas3D.cpp:4890 src/slic3r/GUI/Plater.cpp:3961
 msgid "Remove instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4548
+#: src/slic3r/GUI/GLCanvas3D.cpp:4903
 msgid "Split to objects"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4558 src/slic3r/GUI/GUI_ObjectList.cpp:1650
+#: src/slic3r/GUI/GLCanvas3D.cpp:4913 src/slic3r/GUI/GUI_ObjectList.cpp:1618
 msgid "Split to parts"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4660 src/slic3r/GUI/KBShortcutsDialog.cpp:89
-#: src/slic3r/GUI/MainFrame.cpp:1125
+#: src/slic3r/GUI/GLCanvas3D.cpp:5015 src/slic3r/GUI/KBShortcutsDialog.cpp:125
+#: src/slic3r/GUI/MainFrame.cpp:1199
 msgid "Undo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4660 src/slic3r/GUI/GLCanvas3D.cpp:4699
+#: src/slic3r/GUI/GLCanvas3D.cpp:5015 src/slic3r/GUI/GLCanvas3D.cpp:5054
 msgid "Click right mouse button to open/close History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4683
+#: src/slic3r/GUI/GLCanvas3D.cpp:5038
 msgid "Next Undo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4699 src/slic3r/GUI/KBShortcutsDialog.cpp:90
-#: src/slic3r/GUI/MainFrame.cpp:1128
+#: src/slic3r/GUI/GLCanvas3D.cpp:5054 src/slic3r/GUI/KBShortcutsDialog.cpp:126
+#: src/slic3r/GUI/MainFrame.cpp:1202
 msgid "Redo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4721
+#: src/slic3r/GUI/GLCanvas3D.cpp:5076
 msgid "Next Redo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:6345
+#: src/slic3r/GUI/GLCanvas3D.cpp:7179
 msgid "Selection-Add from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:6364
+#: src/slic3r/GUI/GLCanvas3D.cpp:7198
 msgid "Selection-Remove from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:54
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 src/libslic3r/PrintConfig.cpp:3690
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3593
 msgid "Cut"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
-msgid "in"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:185
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
 msgid "Keep upper part"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:186
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
 msgid "Keep lower part"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:187
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172
 msgid "Rotate lower part upwards"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177
 msgid "Perform cut"
 msgstr ""
 
@@ -2097,7 +2028,7 @@ msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 msgid "Sphere"
 msgstr ""
 
@@ -2176,7 +2107,7 @@ msgid "Quality"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
-#: src/libslic3r/PrintConfig.cpp:3183
+#: src/libslic3r/PrintConfig.cpp:3089
 msgid "Closing distance"
 msgstr ""
 
@@ -2232,7 +2163,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
-#: src/libslic3r/PrintConfig.cpp:3739
+#: src/libslic3r/PrintConfig.cpp:3642
 msgid "Rotate"
 msgstr ""
 
@@ -2240,7 +2171,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
-#: src/libslic3r/PrintConfig.cpp:3754
+#: src/libslic3r/PrintConfig.cpp:3657
 msgid "Scale"
 msgstr ""
 
@@ -2290,7 +2221,7 @@ msgid "Minimal points distance"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
-#: src/libslic3r/PrintConfig.cpp:3013
+#: src/libslic3r/PrintConfig.cpp:2919
 msgid "Support points density"
 msgstr ""
 
@@ -2466,21 +2397,21 @@ msgstr ""
 msgid "Add supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:239
+#: src/slic3r/GUI/GUI_App.cpp:235
 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:241
+#: src/slic3r/GUI/GUI_App.cpp:237
 msgid ""
 "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
 "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:242
+#: src/slic3r/GUI/GUI_App.cpp:238
 msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:378
 msgid ""
 "Starting with %1% 2.3, configuration directory on Linux has changed "
 "(according to XDG Base Directory Specification) to \n"
@@ -2499,20 +2430,20 @@ msgid ""
 "What do you want to do now?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:390
+#: src/slic3r/GUI/GUI_App.cpp:386
 #, possible-c-format
 msgid "%s - BREAKING CHANGE"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:392
+#: src/slic3r/GUI/GUI_App.cpp:388
 msgid "Quit, I will move my data now"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:392
+#: src/slic3r/GUI/GUI_App.cpp:388
 msgid "Start the application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:580
+#: src/slic3r/GUI/GUI_App.cpp:577
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
@@ -2520,263 +2451,236 @@ msgid ""
 "and we would be glad if you reported it.\n"
 "\n"
 "The application will now terminate."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:583
-msgid "Fatal error"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:587
-msgid ""
-"PrusaSlicer has encountered a localization error. Please report to "
-"PrusaSlicer team, what language was active and in which scenario this issue "
-"happened. Thank you.\n"
+msgstr "%s נתקל בשגיאה. זה ככל הנראה נגרם על ידי שגיאת חוסר מקום האם בוודאות יש מספיק זיכרון זמני (RAM) במערכת? זה גם יכול להיות תקלה ואודה לדיווחים עליה.\n"
 "\n"
 "The application will now terminate."
-msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:590
-msgid "Critical error"
+#: src/slic3r/GUI/GUI_App.cpp:580
+msgid "Fatal error"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:700
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:717
+#: src/slic3r/GUI/GUI_App.cpp:706
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:771
+#: src/slic3r/GUI/GUI_App.cpp:760
 #, possible-c-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:773 src/slic3r/GUI/UnsavedChangesDialog.cpp:665
+#: src/slic3r/GUI/GUI_App.cpp:762 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:808
+#: src/slic3r/GUI/GUI_App.cpp:797
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:876
+#: src/slic3r/GUI/GUI_App.cpp:855
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1115
+#: src/slic3r/GUI/GUI_App.cpp:1100
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1119
+#: src/slic3r/GUI/GUI_App.cpp:1104
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1121
+#: src/slic3r/GUI/GUI_App.cpp:1106
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1124 src/slic3r/GUI/PhysicalPrinterDialog.cpp:626
+#: src/slic3r/GUI/GUI_App.cpp:1109
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1137 src/slic3r/GUI/GUI_App.cpp:1148
+#: src/slic3r/GUI/GUI_App.cpp:1122 src/slic3r/GUI/GUI_App.cpp:1133
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1153
+#: src/slic3r/GUI/GUI_App.cpp:1138
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1158
+#: src/slic3r/GUI/GUI_App.cpp:1143
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1234
+#: src/slic3r/GUI/GUI_App.cpp:1224
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1246
+#: src/slic3r/GUI/GUI_App.cpp:1236
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1258
+#: src/slic3r/GUI/GUI_App.cpp:1248
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1269
+#: src/slic3r/GUI/GUI_App.cpp:1259
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1392
+#: src/slic3r/GUI/GUI_App.cpp:1309
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1392
+#: src/slic3r/GUI/GUI_App.cpp:1309
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1541
+#: src/slic3r/GUI/GUI_App.cpp:1439
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1590
+#: src/slic3r/GUI/GUI_App.cpp:1488
 #, possible-c-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1594
+#: src/slic3r/GUI/GUI_App.cpp:1492
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1594
+#: src/slic3r/GUI/GUI_App.cpp:1492
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1595
+#: src/slic3r/GUI/GUI_App.cpp:1493
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1595
+#: src/slic3r/GUI/GUI_App.cpp:1493
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1596
+#: src/slic3r/GUI/GUI_App.cpp:1494
 msgid "Check for updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1596
+#: src/slic3r/GUI/GUI_App.cpp:1494
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1599
+#: src/slic3r/GUI/GUI_App.cpp:1497
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1605
+#: src/slic3r/GUI/GUI_App.cpp:1503
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1610 src/slic3r/GUI/wxExtensions.cpp:685
+#: src/slic3r/GUI/GUI_App.cpp:1508 src/slic3r/GUI/wxExtensions.cpp:673
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1610
+#: src/slic3r/GUI/GUI_App.cpp:1508
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1612 src/slic3r/GUI/wxExtensions.cpp:687
+#: src/slic3r/GUI/GUI_App.cpp:1510 src/slic3r/GUI/wxExtensions.cpp:675
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1612
+#: src/slic3r/GUI/GUI_App.cpp:1510
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1613 src/slic3r/GUI/wxExtensions.cpp:688
+#: src/slic3r/GUI/GUI_App.cpp:1511 src/slic3r/GUI/wxExtensions.cpp:676
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1613
+#: src/slic3r/GUI/GUI_App.cpp:1511
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1618
+#: src/slic3r/GUI/GUI_App.cpp:1516
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1618
+#: src/slic3r/GUI/GUI_App.cpp:1516
 #, possible-c-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1621
+#: src/slic3r/GUI/GUI_App.cpp:1519
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1624
+#: src/slic3r/GUI/GUI_App.cpp:1522
 msgid "Flash printer &firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1624
+#: src/slic3r/GUI/GUI_App.cpp:1522
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1640
+#: src/slic3r/GUI/GUI_App.cpp:1538
 msgid "Taking configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1640
+#: src/slic3r/GUI/GUI_App.cpp:1538
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1669
-msgid "Failed to activate configuration snapshot."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1719
+#: src/slic3r/GUI/GUI_App.cpp:1600
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1721
+#: src/slic3r/GUI/GUI_App.cpp:1602
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1723
+#: src/slic3r/GUI/GUI_App.cpp:1604
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1750
+#: src/slic3r/GUI/GUI_App.cpp:1631
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1781
+#: src/slic3r/GUI/GUI_App.cpp:1662
 msgid "The preset(s) modifications are successfully saved"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1802
-msgid "The uploads are still ongoing"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1802
-msgid "Stop them and continue anyway?"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1805
-msgid "Ongoing uploads"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:2019 src/slic3r/GUI/Tab.cpp:3242
+#: src/slic3r/GUI/GUI_App.cpp:1862 src/slic3r/GUI/Tab.cpp:3205
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2020
+#: src/slic3r/GUI/GUI_App.cpp:1863
 msgid "Please check and fix your object list."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2021 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
-#: src/slic3r/GUI/Plater.cpp:2359 src/slic3r/GUI/Tab.cpp:3244
+#: src/slic3r/GUI/GUI_App.cpp:1864 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
+#: src/slic3r/GUI/Plater.cpp:2347 src/slic3r/GUI/Tab.cpp:3207
 msgid "Attention!"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2038
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Select a gcode file:"
 msgstr ""
 
@@ -2805,38 +2709,38 @@ msgid "Add layer range"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92
-#: src/slic3r/GUI/GUI_ObjectList.cpp:667 src/libslic3r/PrintConfig.cpp:74
-#: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:231
-#: src/libslic3r/PrintConfig.cpp:240 src/libslic3r/PrintConfig.cpp:464
-#: src/libslic3r/PrintConfig.cpp:530 src/libslic3r/PrintConfig.cpp:538
-#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1219
-#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:1650
-#: src/libslic3r/PrintConfig.cpp:1835 src/libslic3r/PrintConfig.cpp:2302
-#: src/libslic3r/PrintConfig.cpp:2361 src/libslic3r/PrintConfig.cpp:2370
+#: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72
+#: src/libslic3r/PrintConfig.cpp:216 src/libslic3r/PrintConfig.cpp:225
+#: src/libslic3r/PrintConfig.cpp:449 src/libslic3r/PrintConfig.cpp:513
+#: src/libslic3r/PrintConfig.cpp:521 src/libslic3r/PrintConfig.cpp:939
+#: src/libslic3r/PrintConfig.cpp:1128 src/libslic3r/PrintConfig.cpp:1493
+#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1741
+#: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2267
+#: src/libslic3r/PrintConfig.cpp:2276
 msgid "Layers and Perimeters"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
-#: src/slic3r/GUI/GUI_ObjectList.cpp:670 src/slic3r/GUI/GUI_Preview.cpp:240
-#: src/slic3r/GUI/Tab.cpp:1472 src/slic3r/GUI/Tab.cpp:1474
+#: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:306
+#: src/slic3r/GUI/Tab.cpp:1458 src/slic3r/GUI/Tab.cpp:1460
 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352
-#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:1715
-#: src/libslic3r/PrintConfig.cpp:2093 src/libslic3r/PrintConfig.cpp:2099
-#: src/libslic3r/PrintConfig.cpp:2107 src/libslic3r/PrintConfig.cpp:2119
-#: src/libslic3r/PrintConfig.cpp:2129 src/libslic3r/PrintConfig.cpp:2137
-#: src/libslic3r/PrintConfig.cpp:2152 src/libslic3r/PrintConfig.cpp:2173
-#: src/libslic3r/PrintConfig.cpp:2185 src/libslic3r/PrintConfig.cpp:2201
-#: src/libslic3r/PrintConfig.cpp:2210 src/libslic3r/PrintConfig.cpp:2219
-#: src/libslic3r/PrintConfig.cpp:2230 src/libslic3r/PrintConfig.cpp:2244
-#: src/libslic3r/PrintConfig.cpp:2252 src/libslic3r/PrintConfig.cpp:2253
-#: src/libslic3r/PrintConfig.cpp:2262 src/libslic3r/PrintConfig.cpp:2270
-#: src/libslic3r/PrintConfig.cpp:2284
+#: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:1621
+#: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2005
+#: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2025
+#: src/libslic3r/PrintConfig.cpp:2035 src/libslic3r/PrintConfig.cpp:2043
+#: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2079
+#: src/libslic3r/PrintConfig.cpp:2091 src/libslic3r/PrintConfig.cpp:2107
+#: src/libslic3r/PrintConfig.cpp:2116 src/libslic3r/PrintConfig.cpp:2125
+#: src/libslic3r/PrintConfig.cpp:2136 src/libslic3r/PrintConfig.cpp:2150
+#: src/libslic3r/PrintConfig.cpp:2158 src/libslic3r/PrintConfig.cpp:2159
+#: src/libslic3r/PrintConfig.cpp:2168 src/libslic3r/PrintConfig.cpp:2176
+#: src/libslic3r/PrintConfig.cpp:2190
 msgid "Support material"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
-#: src/slic3r/GUI/GUI_ObjectList.cpp:674 src/libslic3r/PrintConfig.cpp:2480
-#: src/libslic3r/PrintConfig.cpp:2488
+#: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2386
+#: src/libslic3r/PrintConfig.cpp:2394
 msgid "Wipe options"
 msgstr ""
 
@@ -2860,432 +2764,433 @@ msgstr ""
 msgid "Add support blocker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:669
-#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1442
+#: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653
+#: src/slic3r/GUI/GUI_Preview.cpp:302 src/slic3r/GUI/Tab.cpp:1428
 #: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344
-#: src/libslic3r/PrintConfig.cpp:1226 src/libslic3r/PrintConfig.cpp:1232
-#: src/libslic3r/PrintConfig.cpp:1246 src/libslic3r/PrintConfig.cpp:1256
-#: src/libslic3r/PrintConfig.cpp:1264 src/libslic3r/PrintConfig.cpp:1266
+#: src/libslic3r/PrintConfig.cpp:1135 src/libslic3r/PrintConfig.cpp:1141
+#: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1165
+#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:1175
 msgid "Ironing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:671
-#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/Tab.cpp:1498
-#: src/libslic3r/PrintConfig.cpp:291 src/libslic3r/PrintConfig.cpp:518
-#: src/libslic3r/PrintConfig.cpp:1012 src/libslic3r/PrintConfig.cpp:1192
-#: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1640
-#: src/libslic3r/PrintConfig.cpp:1916 src/libslic3r/PrintConfig.cpp:1968
-#: src/libslic3r/PrintConfig.cpp:2346
+#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655
+#: src/slic3r/GUI/GUI_Preview.cpp:273 src/slic3r/GUI/Tab.cpp:1484
+#: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:501
+#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1101
+#: src/libslic3r/PrintConfig.cpp:1174 src/libslic3r/PrintConfig.cpp:1550
+#: src/libslic3r/PrintConfig.cpp:1822 src/libslic3r/PrintConfig.cpp:1874
+#: src/libslic3r/PrintConfig.cpp:2252
 msgid "Speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:672
-#: src/slic3r/GUI/Tab.cpp:1534 src/slic3r/GUI/Tab.cpp:2112
-#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:1146
-#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:1937
-#: src/libslic3r/PrintConfig.cpp:2165 src/libslic3r/PrintConfig.cpp:2192
+#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656
+#: src/slic3r/GUI/Tab.cpp:1520 src/slic3r/GUI/Tab.cpp:2085
+#: src/libslic3r/PrintConfig.cpp:531 src/libslic3r/PrintConfig.cpp:1055
+#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1843
+#: src/libslic3r/PrintConfig.cpp:2071 src/libslic3r/PrintConfig.cpp:2098
 msgid "Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:673
-#: src/libslic3r/PrintConfig.cpp:507 src/libslic3r/PrintConfig.cpp:616
-#: src/libslic3r/PrintConfig.cpp:957 src/libslic3r/PrintConfig.cpp:1154
-#: src/libslic3r/PrintConfig.cpp:1627 src/libslic3r/PrintConfig.cpp:1957
-#: src/libslic3r/PrintConfig.cpp:2174 src/libslic3r/PrintConfig.cpp:2334
+#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657
+#: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:598
+#: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:1063
+#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:1863
+#: src/libslic3r/PrintConfig.cpp:2080 src/libslic3r/PrintConfig.cpp:2240
 msgid "Extrusion Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:677
-#: src/slic3r/GUI/Tab.cpp:1428 src/slic3r/GUI/Tab.cpp:1452
-#: src/slic3r/GUI/Tab.cpp:1555 src/slic3r/GUI/Tab.cpp:1558
-#: src/slic3r/GUI/Tab.cpp:1855 src/slic3r/GUI/Tab.cpp:2197
-#: src/slic3r/GUI/Tab.cpp:4114 src/libslic3r/PrintConfig.cpp:92
-#: src/libslic3r/PrintConfig.cpp:132 src/libslic3r/PrintConfig.cpp:279
-#: src/libslic3r/PrintConfig.cpp:1097 src/libslic3r/PrintConfig.cpp:1181
-#: src/libslic3r/PrintConfig.cpp:2504 src/libslic3r/PrintConfig.cpp:2676
+#: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661
+#: src/slic3r/GUI/Tab.cpp:1416 src/slic3r/GUI/Tab.cpp:1438
+#: src/slic3r/GUI/Tab.cpp:1541 src/slic3r/GUI/Tab.cpp:1544
+#: src/slic3r/GUI/Tab.cpp:1828 src/slic3r/GUI/Tab.cpp:2165
+#: src/slic3r/GUI/Tab.cpp:4077 src/libslic3r/PrintConfig.cpp:90
+#: src/libslic3r/PrintConfig.cpp:128 src/libslic3r/PrintConfig.cpp:264
+#: src/libslic3r/PrintConfig.cpp:1090 src/libslic3r/PrintConfig.cpp:2410
+#: src/libslic3r/PrintConfig.cpp:2582
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:679
-#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4048
-#: src/slic3r/GUI/Tab.cpp:4049 src/libslic3r/PrintConfig.cpp:2842
-#: src/libslic3r/PrintConfig.cpp:2849 src/libslic3r/PrintConfig.cpp:2858
-#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2877
-#: src/libslic3r/PrintConfig.cpp:2887 src/libslic3r/PrintConfig.cpp:2924
-#: src/libslic3r/PrintConfig.cpp:2931 src/libslic3r/PrintConfig.cpp:2942
-#: src/libslic3r/PrintConfig.cpp:2952 src/libslic3r/PrintConfig.cpp:2961
-#: src/libslic3r/PrintConfig.cpp:2974 src/libslic3r/PrintConfig.cpp:2984
-#: src/libslic3r/PrintConfig.cpp:2993 src/libslic3r/PrintConfig.cpp:3003
-#: src/libslic3r/PrintConfig.cpp:3014 src/libslic3r/PrintConfig.cpp:3022
+#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663
+#: src/slic3r/GUI/Plater.cpp:356 src/slic3r/GUI/Tab.cpp:4011
+#: src/slic3r/GUI/Tab.cpp:4012 src/libslic3r/PrintConfig.cpp:2748
+#: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2764
+#: src/libslic3r/PrintConfig.cpp:2773 src/libslic3r/PrintConfig.cpp:2783
+#: src/libslic3r/PrintConfig.cpp:2793 src/libslic3r/PrintConfig.cpp:2830
+#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2848
+#: src/libslic3r/PrintConfig.cpp:2858 src/libslic3r/PrintConfig.cpp:2867
+#: src/libslic3r/PrintConfig.cpp:2880 src/libslic3r/PrintConfig.cpp:2890
+#: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2909
+#: src/libslic3r/PrintConfig.cpp:2920 src/libslic3r/PrintConfig.cpp:2928
 msgid "Supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:680
-#: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4089
-#: src/slic3r/GUI/Tab.cpp:4090 src/slic3r/GUI/Tab.cpp:4161
-#: src/libslic3r/PrintConfig.cpp:3030 src/libslic3r/PrintConfig.cpp:3037
-#: src/libslic3r/PrintConfig.cpp:3051 src/libslic3r/PrintConfig.cpp:3062
-#: src/libslic3r/PrintConfig.cpp:3072 src/libslic3r/PrintConfig.cpp:3094
-#: src/libslic3r/PrintConfig.cpp:3105 src/libslic3r/PrintConfig.cpp:3112
-#: src/libslic3r/PrintConfig.cpp:3119 src/libslic3r/PrintConfig.cpp:3130
-#: src/libslic3r/PrintConfig.cpp:3139 src/libslic3r/PrintConfig.cpp:3148
+#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664
+#: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Tab.cpp:4052
+#: src/slic3r/GUI/Tab.cpp:4053 src/slic3r/GUI/Tab.cpp:4124
+#: src/libslic3r/PrintConfig.cpp:2936 src/libslic3r/PrintConfig.cpp:2943
+#: src/libslic3r/PrintConfig.cpp:2957 src/libslic3r/PrintConfig.cpp:2968
+#: src/libslic3r/PrintConfig.cpp:2978 src/libslic3r/PrintConfig.cpp:3000
+#: src/libslic3r/PrintConfig.cpp:3011 src/libslic3r/PrintConfig.cpp:3018
+#: src/libslic3r/PrintConfig.cpp:3025 src/libslic3r/PrintConfig.cpp:3036
+#: src/libslic3r/PrintConfig.cpp:3045 src/libslic3r/PrintConfig.cpp:3054
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4107
-#: src/slic3r/GUI/Tab.cpp:4108 src/libslic3r/SLA/Hollowing.cpp:45
+#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4070
+#: src/slic3r/GUI/Tab.cpp:4071 src/libslic3r/SLA/Hollowing.cpp:45
 #: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66
-#: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3158
-#: src/libslic3r/PrintConfig.cpp:3165 src/libslic3r/PrintConfig.cpp:3175
-#: src/libslic3r/PrintConfig.cpp:3184
+#: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3064
+#: src/libslic3r/PrintConfig.cpp:3071 src/libslic3r/PrintConfig.cpp:3081
+#: src/libslic3r/PrintConfig.cpp:3090
 msgid "Hollowing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:300
+#: src/slic3r/GUI/GUI_ObjectList.cpp:284
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
 msgid "Name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:457
+#: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441
 msgid "Editing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:402
+#: src/slic3r/GUI/GUI_ObjectList.cpp:386
 #, possible-c-format
 msgid "Auto-repaired (%d errors):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:409
+#: src/slic3r/GUI/GUI_ObjectList.cpp:393
 msgid "degenerate facets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:410
+#: src/slic3r/GUI/GUI_ObjectList.cpp:394
 msgid "edges fixed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:411
+#: src/slic3r/GUI/GUI_ObjectList.cpp:395
 msgid "facets removed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:412
+#: src/slic3r/GUI/GUI_ObjectList.cpp:396
 msgid "facets added"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:413
+#: src/slic3r/GUI/GUI_ObjectList.cpp:397
 msgid "facets reversed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:414
+#: src/slic3r/GUI/GUI_ObjectList.cpp:398
 msgid "backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:422
+#: src/slic3r/GUI/GUI_ObjectList.cpp:406
 msgid "Right button click the icon to fix STL through Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:459
+#: src/slic3r/GUI/GUI_ObjectList.cpp:443
 msgid "Right button click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:461
+#: src/slic3r/GUI/GUI_ObjectList.cpp:445
 msgid "Click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:465
+#: src/slic3r/GUI/GUI_ObjectList.cpp:449
 msgid "Right button click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:467
+#: src/slic3r/GUI/GUI_ObjectList.cpp:451
 msgid "Click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:590
+#: src/slic3r/GUI/GUI_ObjectList.cpp:574
 msgid "Change Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:605
+#: src/slic3r/GUI/GUI_ObjectList.cpp:589
 msgid "Rename Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:605
+#: src/slic3r/GUI/GUI_ObjectList.cpp:589
 msgid "Rename Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1247
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4372
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1215
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4244
 msgid "Instances to Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1262
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
 msgid "Volumes in Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1262
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
 msgid "Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1338
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1693
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1699
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2081
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1306
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1661
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1667
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
 #, possible-c-format
 msgid "Quick Add Settings (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1428
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1396
 msgid "Select showing settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1477
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1445
 msgid "Add Settings for Layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1478
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
 msgid "Add Settings for Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1479
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1447
 msgid "Add Settings for Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1549
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1517
 msgid "Add Settings Bundle for Height range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1550
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1518
 msgid "Add Settings Bundle for Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1551
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1519
 msgid "Add Settings Bundle for Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1590
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1558
 msgid "Load"
 msgstr ""
 
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1595
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1627
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1631
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1599
 msgid "Box"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 msgid "Cylinder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 msgid "Slab"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1663
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1631
 msgid "Height range Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1672
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1640
 msgid "Add settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1750
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1718
 msgid "Change type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1760
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1772
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1728
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
 msgid "Set as a Separated Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1772
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
 msgid "Set as a Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1782
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1750
 msgid "Printable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1797
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1765
 msgid "Rename"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1808
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1776
 msgid "Fix through the Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1818 src/slic3r/GUI/Plater.cpp:4035
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3985
 msgid "Export as STL"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1825
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4567 src/slic3r/GUI/Plater.cpp:4001
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1793
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3953
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1832
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1800
 msgid "Set extruder for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1864 src/libslic3r/PrintConfig.cpp:391
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:376
 msgid "Default"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1884
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
 msgid "Scale to print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1884
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1913 src/slic3r/GUI/Plater.cpp:5224
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:4994
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1915 src/slic3r/GUI/Plater.cpp:5224
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:4994
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1944
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2630 src/libslic3r/PrintConfig.cpp:3730
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3633
 msgid "Merge"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1944
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
 msgid "Merge objects to the one multipart object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
 msgid "Merge objects to the one single object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2026
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2283
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2210
 msgid "Add Shape"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2111
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2038
 msgid "Load Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2150
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2077
 msgid "Error!"
-msgstr ""
+msgstr "שגיאה!"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2225
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2152
 msgid "Add Generic Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2254
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2181
 msgid "Generic"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2380
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2307
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2408
+msgid "Last instance of an object cannot be deleted."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2319
 msgid "Delete Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2402
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2341
 msgid "Delete All Instances from Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2418
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2357
 msgid "Delete Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2450
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2389
 msgid "From Object List You can't delete the last solid part from object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2454
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2393
 msgid "Delete Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2469
-msgid "Last instance of an object cannot be deleted."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2473
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
 msgid "Delete Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2497 src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2862
 msgid ""
 "The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2501
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2440
 msgid "Split to Parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2637
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2576
 msgid "Merged"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2721
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2660
 msgid "Merge all parts to the one single object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2753
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2692
 msgid "Add Layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2907
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
 msgid "Group manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2919
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2858
 msgid "Object manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2932
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
 msgid "Object Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2936
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2875
 msgid "Part Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2941
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2880
 msgid "Layer range Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2947
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2886
 msgid "Part manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2953
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2892
 msgid "Instance manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2960
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
 msgid "Height ranges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2960
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
 msgid "Settings for height range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3144
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3083
 msgid "Delete Selected Item"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3332
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3221
 msgid "Delete Selected"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3408
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3436
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3456
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3297
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3325
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3345
 msgid "Add Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3502
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3391
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "The next layer range is too thin to be split to two\n"
 "without violating the minimum layer height."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3506
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3395
 msgid ""
 "Cannot insert a new layer range between the current and the next layer "
 "range.\n"
@@ -3293,122 +3198,122 @@ msgid ""
 "is thinner than the minimum layer height allowed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3511
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3400
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "Current layer range overlaps with the next layer range."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3570
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3459
 msgid "Edit Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3865
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3754
 msgid "Selection-Remove from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3873
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3762
 msgid "Selection-Add from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4008
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3880
 msgid "Object or Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4009
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4142
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4009
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
 msgid "Layer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4011
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3883
 msgid "Unsupported selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4012
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3884
 #, possible-c-format
 msgid "You started your selection with %s Item."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4013
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3885
 #, possible-c-format
 msgid "In this mode you can select only other %s Items%s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3888
 msgid "of a current Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4021
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4096 src/slic3r/GUI/Plater.cpp:143
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3893
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:142
 msgid "Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4009
 msgid "You can't change a type of the last solid part of the object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4142
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4142
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Support Enforcer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4142
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Support Blocker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
 msgid "Select type of part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4149
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4021
 msgid "Change Part Type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4394
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
 msgid "Enter new name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4394
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
 msgid "Renaming"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4537
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4282
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
 #: src/slic3r/GUI/SavePresetDialog.cpp:101
 #: src/slic3r/GUI/SavePresetDialog.cpp:109
 msgid "The supplied name is not valid;"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4411
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4538
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4283
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
 #: src/slic3r/GUI/SavePresetDialog.cpp:102
 msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4586
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4458
 msgid "Select extruder number:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4587
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4459
 msgid "This extruder will be set for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4612
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
 msgid "Change Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4709 src/slic3r/GUI/Selection.cpp:1485
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531
 msgid "Set Printable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4709 src/slic3r/GUI/Selection.cpp:1485
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531
 msgid "Set Unprintable"
 msgstr ""
 
@@ -3426,7 +3331,7 @@ msgstr ""
 msgid "Select coordinate space, in which the transformation will be performed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:537
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:621
 msgid "Object name"
 msgstr ""
 
@@ -3437,8 +3342,8 @@ msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
-#: src/slic3r/GUI/Mouse3DController.cpp:486
-#: src/slic3r/GUI/Mouse3DController.cpp:507
+#: src/slic3r/GUI/Mouse3DController.cpp:487
+#: src/slic3r/GUI/Mouse3DController.cpp:508
 msgid "Rotation"
 msgstr ""
 
@@ -3451,9 +3356,16 @@ msgstr ""
 msgid "Set Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
-msgid "Drop to bed"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
+msgid "in"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
+msgid "Drop to bed"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372
@@ -3469,10 +3381,6 @@ msgstr ""
 msgid "Reset scale"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:423
-msgid "Inches"
-msgstr ""
-
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
 msgid "Scale factors"
 msgstr ""
@@ -3531,128 +3439,133 @@ msgstr ""
 msgid "Change Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:212
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/GUI_Preview.cpp:266
 msgid "View"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:215 src/libslic3r/PrintConfig.cpp:560
+#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/PrintConfig.cpp:543
 msgid "Height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:216 src/libslic3r/PrintConfig.cpp:2466
+#: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/PrintConfig.cpp:2372
 msgid "Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/Tab.cpp:1840
+#: src/slic3r/GUI/GUI_Preview.cpp:274 src/slic3r/GUI/Tab.cpp:1814
 msgid "Fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:219
+#: src/slic3r/GUI/GUI_Preview.cpp:275
 msgid "Volumetric flow rate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:224
+#: src/slic3r/GUI/GUI_Preview.cpp:281 src/slic3r/GUI/GUI_Preview.cpp:283
 msgid "Show"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/GUI_Preview.cpp:245
+#: src/slic3r/GUI/GUI_Preview.cpp:288 src/slic3r/GUI/GUI_Preview.cpp:290
+#: src/slic3r/GUI/GUI_Preview.cpp:311
 msgid "Feature types"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/ExtrusionEntity.cpp:310
+#: src/slic3r/GUI/GUI_Preview.cpp:296 src/libslic3r/ExtrusionEntity.cpp:310
 #: src/libslic3r/ExtrusionEntity.cpp:332
 msgid "Perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/ExtrusionEntity.cpp:311
+#: src/slic3r/GUI/GUI_Preview.cpp:297 src/libslic3r/ExtrusionEntity.cpp:311
 #: src/libslic3r/ExtrusionEntity.cpp:334
 msgid "External perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/ExtrusionEntity.cpp:312
+#: src/slic3r/GUI/GUI_Preview.cpp:298 src/libslic3r/ExtrusionEntity.cpp:312
 #: src/libslic3r/ExtrusionEntity.cpp:336
 msgid "Overhang perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/ExtrusionEntity.cpp:313
+#: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:313
 #: src/libslic3r/ExtrusionEntity.cpp:338
 msgid "Internal infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/ExtrusionEntity.cpp:314
-#: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1956
-#: src/libslic3r/PrintConfig.cpp:1967
+#: src/slic3r/GUI/GUI_Preview.cpp:300 src/libslic3r/ExtrusionEntity.cpp:314
+#: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1862
+#: src/libslic3r/PrintConfig.cpp:1873
 msgid "Solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/ExtrusionEntity.cpp:315
-#: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2333
-#: src/libslic3r/PrintConfig.cpp:2345
+#: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:315
+#: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2239
+#: src/libslic3r/PrintConfig.cpp:2251
 msgid "Top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:317
+#: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:317
 #: src/libslic3r/ExtrusionEntity.cpp:346
 msgid "Bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:318
-#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:1011
+#: src/slic3r/GUI/GUI_Preview.cpp:304 src/libslic3r/ExtrusionEntity.cpp:318
+#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:969
 msgid "Gap fill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:239 src/slic3r/GUI/Tab.cpp:1462
+#: src/slic3r/GUI/GUI_Preview.cpp:305 src/slic3r/GUI/Tab.cpp:1448
 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350
 msgid "Skirt"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:321
-#: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2218
+#: src/slic3r/GUI/GUI_Preview.cpp:307 src/libslic3r/ExtrusionEntity.cpp:321
+#: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2124
 msgid "Support material interface"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:242 src/slic3r/GUI/Tab.cpp:1545
+#: src/slic3r/GUI/GUI_Preview.cpp:308 src/slic3r/GUI/Tab.cpp:1531
 #: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356
 msgid "Wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1031
+#: src/slic3r/GUI/GUI_Preview.cpp:333 src/slic3r/GUI/GUI_Preview.cpp:1473
 msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1032
+#: src/slic3r/GUI/GUI_Preview.cpp:334
+msgid "Legend"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1474
 msgid "Tool marker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1033
+#: src/slic3r/GUI/GUI_Preview.cpp:1475
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:389
+#: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:464
 msgid "Use for search"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:383
+#: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:458
 msgid "Category"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:385
+#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:460
 msgid "Search in English"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:145
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:149
 msgid "Arranging"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:175
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176
 msgid "Could not arrange model objects! Some geometries may be invalid."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:181
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
 msgid "Arranging canceled."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183
 msgid "Arranging done."
 msgstr ""
 
@@ -3716,1310 +3629,1203 @@ msgstr ""
 msgid "Importing done."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2357
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2345
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2358
-#: src/slic3r/GUI/Tab.cpp:3243
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2346
+#: src/slic3r/GUI/Tab.cpp:3206
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:17 src/slic3r/GUI/MainFrame.cpp:894
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:37
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:39 src/slic3r/GUI/MainFrame.cpp:953
+#: src/slic3r/GUI/MainFrame.cpp:1344
 msgid "Keyboard Shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:69
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
 msgid "New project, clear plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:70
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:71
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
 msgid "Save project (3mf)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:72
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
 msgid "Save project as (3mf)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:73
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
 msgid "(Re)slice"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:75
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
 msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:76
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
 msgid "Import Config from ini/amf/3mf/gcode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:77
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
 msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:79 src/slic3r/GUI/Plater.cpp:770
-#: src/slic3r/GUI/Plater.cpp:6054 src/libslic3r/PrintConfig.cpp:3635
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Plater.cpp:762
+#: src/slic3r/GUI/Plater.cpp:5849 src/libslic3r/PrintConfig.cpp:3538
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:80 src/slic3r/GUI/Plater.cpp:6055
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Plater.cpp:5850
 msgid "Send G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:81
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
 msgid "Export config"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:82 src/slic3r/GUI/Plater.cpp:758
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118 src/slic3r/GUI/Plater.cpp:750
 msgid "Export to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:83
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
 msgid "Eject SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
 msgid "Select all objects"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
 msgid "Deselect all"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
 msgid "Delete selected"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
 msgid "Copy to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
 msgid "Paste from clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
 msgid "Reload plater from disk"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
 msgid "Select Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
 msgid "Select Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
 msgid "Select Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
 msgid "Select Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
 msgid "Switch to 3D"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
 msgid "Switch to Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
-#: src/slic3r/GUI/PrintHostDialogs.cpp:165
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+#: src/slic3r/GUI/PrintHostDialogs.cpp:163
 msgid "Print host upload queue"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/MainFrame.cpp:65
-#: src/slic3r/GUI/MainFrame.cpp:1191
-msgid "Open new instance"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
 msgid "Camera view"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
 msgid "Show/Hide object/instance labels"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:112 src/slic3r/GUI/Preferences.cpp:13
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Preferences.cpp:12
 msgid "Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
 msgid "Show keyboard shortcuts list"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
 msgid "Commands"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
 msgid "Add Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
 msgid "Remove Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
 msgid ""
 "Press to select multiple objects\n"
 "or move multiple objects with mouse"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
 msgid "Press to activate selection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
 msgid "Press to activate deselection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
 msgid "Arrow Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
 msgid "Move selection 10 mm in positive Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
 msgid "Arrow Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
 msgid "Move selection 10 mm in negative Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
 msgid "Arrow Left"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
 msgid "Move selection 10 mm in negative X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
 msgid "Arrow Right"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
 msgid "Move selection 10 mm in positive X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
 msgid "Any arrow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
 msgid "Movement step set to 1 mm"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
 msgid "Movement in camera space"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
 msgid "Page Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
 msgid "Rotate selection 45 degrees CCW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
 msgid "Page Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
 msgid "Rotate selection 45 degrees CW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
 msgid "Gizmo move"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
 msgid "Gizmo scale"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
 msgid "Gizmo rotate"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
 msgid "Gizmo cut"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
 msgid "Gizmo Place face on bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
 msgid "Gizmo SLA hollow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
 msgid "Gizmo SLA support points"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
 msgid "Unselect gizmo or clear selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
 msgid "Change camera type (perspective, orthographic)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
 msgid "Zoom to Bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
 msgid ""
 "Zoom to selected object\n"
 "or all objects in scene, if none selected"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
 msgid "Zoom in"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
 msgid "Zoom out"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
 msgid "Switch between Editor/Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
 msgid "Collapse/Expand the sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
-msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
 msgid "Show/Hide 3Dconnexion devices settings dialog"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:167 src/slic3r/GUI/MainFrame.cpp:331
-#: src/slic3r/GUI/MainFrame.cpp:343
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194 src/slic3r/GUI/MainFrame.cpp:351
+#: src/slic3r/GUI/MainFrame.cpp:363
 msgid "Plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
 msgid "Gizmo move: Press to snap by 1mm"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
 msgid "Gizmo scale: Press to snap by 5%"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
 msgid "Gizmo scale: Scale selection to fit print volume"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
 msgid "Gizmo scale: Press to activate one direction scaling"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
 msgid "Gizmo scale: Press to scale selected objects around their own center"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
 msgid "Gizmo rotate: Press to rotate selected objects around their own center"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
 msgid "Gizmos"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
-msgid ""
-"The following shortcuts are applicable when the specified gizmo is active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:183 src/slic3r/GUI/MainFrame.cpp:1244
-msgid "Open a G-code file"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:185 src/slic3r/GUI/MainFrame.cpp:1142
-#: src/slic3r/GUI/MainFrame.cpp:1146 src/slic3r/GUI/MainFrame.cpp:1249
-#: src/slic3r/GUI/MainFrame.cpp:1253
-msgid "Reload the plater from disk"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
-msgid "Vertical slider - Move active thumb Up"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
-msgid "Vertical slider - Move active thumb Down"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
-msgid "Horizontal slider - Move active thumb Left"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
-msgid "Horizontal slider - Move active thumb Right"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
-msgid "On/Off one layer mode of the vertical slider"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
-msgid "Show/Hide Legend and Estimated printing time"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
-msgid "Upper layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
-msgid "Lower layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
 msgid "Upper Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
 msgid "Lower Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:211
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
 msgid "Show/Hide Legend & Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/Plater.cpp:4200
-#: src/slic3r/GUI/Tab.cpp:2602
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:219 src/slic3r/GUI/Plater.cpp:4153
+#: src/slic3r/GUI/Tab.cpp:2570
 msgid "Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
-msgid "Move active thumb Up"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
-msgid "Move active thumb Down"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
-msgid "Set upper thumb as active"
-msgstr ""
-
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222
-msgid "Set lower thumb as active"
+msgid "Move current slider thumb Up"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
-msgid "Add color change marker for current layer"
+msgid "Move current slider thumb Down"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
-msgid "Delete color change marker for current layer"
+msgid "Set upper thumb to current slider thumb"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgid "Set lower thumb to current slider thumb"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-msgid "Move current slider thumb Up"
+msgid "Add color change marker for current layer"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:227
-msgid "Move current slider thumb Down"
+msgid "Delete color change marker for current layer"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:228
-msgid "Set upper thumb to current slider thumb"
-msgstr ""
-
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229
-msgid "Set lower thumb to current slider thumb"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
 msgid ""
 "Press to speed up 5 times while moving thumb\n"
 "with arrow keys or mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
-msgid "Vertical Slider"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
+msgid "Layers Slider"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
-msgid ""
-"The following shortcuts are applicable in G-code preview when the vertical "
-"slider is active"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
+msgid "Move current slider thumb Left"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
-msgid "Move active thumb Left"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
+msgid "Move current slider thumb Right"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:242
-msgid "Move active thumb Right"
+msgid "Sequential Slider"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
-msgid "Set left thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
-msgid "Set right thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
-msgid "Move active slider thumb Left"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
-msgid "Move active slider thumb Right"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-msgid "Horizontal Slider"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-msgid ""
-"The following shortcuts are applicable in G-code preview when the horizontal "
-"slider is active"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:270
+msgid "Keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:276
-msgid "Keyboard shortcuts"
+#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:1274
+msgid "Open new instance"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:65 src/slic3r/GUI/MainFrame.cpp:79
-#: src/slic3r/GUI/MainFrame.cpp:1191
+#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:77
+#: src/slic3r/GUI/MainFrame.cpp:1274
 msgid "Open a new PrusaSlicer instance"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:81
+#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:79
 msgid "G-code preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:1091
+#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1153
 msgid "Open G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:79 src/slic3r/GUI/MainFrame.cpp:1260
+#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:1410
 msgid "Open PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:81
+#: src/slic3r/GUI/MainFrame.cpp:79
 msgid "Open new G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:153
+#: src/slic3r/GUI/MainFrame.cpp:166
 msgid ""
 "Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/"
 "releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:510
+#: src/slic3r/GUI/MainFrame.cpp:550 src/slic3r/GUI/MainFrame.cpp:552
 msgid "based on Slic3r"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:866
+#: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320
 msgid "Prusa 3D &Drivers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:866
+#: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320
 msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:868
+#: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322
 msgid "Software &Releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:868
+#: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322
 msgid "Open the software releases page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:874
+#: src/slic3r/GUI/MainFrame.cpp:929 src/slic3r/GUI/MainFrame.cpp:1328
 #, possible-c-format
 msgid "%s &Website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:875
+#: src/slic3r/GUI/MainFrame.cpp:930 src/slic3r/GUI/MainFrame.cpp:1329
 #, possible-c-format
 msgid "Open the %s website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:881
+#: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335
 msgid "System &Info"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:881
+#: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335
 msgid "Show system information"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:883
+#: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337
 msgid "Show &Configuration Folder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:883
+#: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337
 msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:885
+#: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339
 msgid "Report an I&ssue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:885
+#: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339
 #, possible-c-format
 msgid "Report an issue on %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891
+#: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949
+#: src/slic3r/GUI/MainFrame.cpp:1341
 #, possible-c-format
 msgid "&About %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891
+#: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949
+#: src/slic3r/GUI/MainFrame.cpp:1341
 msgid "Show about dialog"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:894
+#: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1344
 msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:908
+#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287
 msgid "Iso"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:908
+#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287
 msgid "Iso View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Top
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:912 src/libslic3r/PrintConfig.cpp:2360
-#: src/libslic3r/PrintConfig.cpp:2369
+#: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291
+#: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2275
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:912
+#: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291
 msgid "Top View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Bottom
 #. TRN To be shown in Print Settings "Bottom solid layers"
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:915 src/libslic3r/PrintConfig.cpp:230
-#: src/libslic3r/PrintConfig.cpp:239
+#: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294
+#: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:224
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:915
+#: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294
 msgid "Bottom View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:917
+#: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296
 msgid "Front"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:917
+#: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296
 msgid "Front View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:919 src/libslic3r/PrintConfig.cpp:1845
+#: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298
+#: src/libslic3r/PrintConfig.cpp:1751
 msgid "Rear"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:919
+#: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298
 msgid "Rear View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:921
+#: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300
 msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:921
+#: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300
 msgid "Left View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:923
+#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302
 msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:923
+#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302
 msgid "Right View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:936
+#: src/slic3r/GUI/MainFrame.cpp:998
 msgid "&New Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:936
+#: src/slic3r/GUI/MainFrame.cpp:998
 msgid "Start a new project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:939
+#: src/slic3r/GUI/MainFrame.cpp:1001
 msgid "&Open Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:939
+#: src/slic3r/GUI/MainFrame.cpp:1001
 msgid "Open a project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:944
+#: src/slic3r/GUI/MainFrame.cpp:1006
 msgid "Recent projects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:953
+#: src/slic3r/GUI/MainFrame.cpp:1015
 msgid ""
 "The selected project is no longer available.\n"
 "Do you want to remove it from the recent projects list?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1343
-#: src/slic3r/GUI/PrintHostDialogs.cpp:263
+#: src/slic3r/GUI/MainFrame.cpp:1015 src/slic3r/GUI/MainFrame.cpp:1498
+#: src/slic3r/GUI/PrintHostDialogs.cpp:259
 msgid "Error"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:978
+#: src/slic3r/GUI/MainFrame.cpp:1040
 msgid "&Save Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:978
+#: src/slic3r/GUI/MainFrame.cpp:1040
 msgid "Save current project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984
+#: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046
 msgid "Save Project &as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984
+#: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046
 msgid "Save current project file as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:992
+#: src/slic3r/GUI/MainFrame.cpp:1054
 msgid "Import STL/OBJ/AM&F/3MF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:992
+#: src/slic3r/GUI/MainFrame.cpp:1054
 msgid "Load a model"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:996
+#: src/slic3r/GUI/MainFrame.cpp:1058
 msgid "Import STL (imperial units)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:996
+#: src/slic3r/GUI/MainFrame.cpp:1058
 msgid "Load an model saved with imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1000
+#: src/slic3r/GUI/MainFrame.cpp:1062
 msgid "Import SL1 archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1000
+#: src/slic3r/GUI/MainFrame.cpp:1062
 msgid "Load an SL1 archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1005
+#: src/slic3r/GUI/MainFrame.cpp:1067
 msgid "Import &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1005
+#: src/slic3r/GUI/MainFrame.cpp:1067
 msgid "Load exported configuration file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1008
+#: src/slic3r/GUI/MainFrame.cpp:1070
 msgid "Import Config from &project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1008
+#: src/slic3r/GUI/MainFrame.cpp:1070
 msgid "Load configuration from project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1012
+#: src/slic3r/GUI/MainFrame.cpp:1074
 msgid "Import Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1012
+#: src/slic3r/GUI/MainFrame.cpp:1074
 msgid "Load presets from a bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1015
+#: src/slic3r/GUI/MainFrame.cpp:1077
 msgid "&Import"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1018 src/slic3r/GUI/MainFrame.cpp:1305
+#: src/slic3r/GUI/MainFrame.cpp:1080 src/slic3r/GUI/MainFrame.cpp:1460
 msgid "Export &G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1018
+#: src/slic3r/GUI/MainFrame.cpp:1080
 msgid "Export current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1022 src/slic3r/GUI/MainFrame.cpp:1306
+#: src/slic3r/GUI/MainFrame.cpp:1084 src/slic3r/GUI/MainFrame.cpp:1461
 msgid "S&end G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1022
+#: src/slic3r/GUI/MainFrame.cpp:1084
 msgid "Send to print current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1026
+#: src/slic3r/GUI/MainFrame.cpp:1088
 msgid "Export G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1026
+#: src/slic3r/GUI/MainFrame.cpp:1088
 msgid "Export current plate as G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1030
+#: src/slic3r/GUI/MainFrame.cpp:1092
 msgid "Export plate as &STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1030
+#: src/slic3r/GUI/MainFrame.cpp:1092
 msgid "Export current plate as STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1033
+#: src/slic3r/GUI/MainFrame.cpp:1095
 msgid "Export plate as STL &including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1033
+#: src/slic3r/GUI/MainFrame.cpp:1095
 msgid "Export current plate as STL including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1036
+#: src/slic3r/GUI/MainFrame.cpp:1098
 msgid "Export plate as &AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1036
+#: src/slic3r/GUI/MainFrame.cpp:1098
 msgid "Export current plate as AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257
+#: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407
 msgid "Export &toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257
+#: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407
 msgid "Export toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1044
+#: src/slic3r/GUI/MainFrame.cpp:1106
 msgid "Export &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1044
+#: src/slic3r/GUI/MainFrame.cpp:1106
 msgid "Export current configuration to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1047
+#: src/slic3r/GUI/MainFrame.cpp:1109
 msgid "Export Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1047
+#: src/slic3r/GUI/MainFrame.cpp:1109
 msgid "Export all presets to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1050
+#: src/slic3r/GUI/MainFrame.cpp:1112
 msgid "Export Config Bundle With Physical Printers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1050
+#: src/slic3r/GUI/MainFrame.cpp:1112
 msgid "Export all presets including physical printers to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1053
+#: src/slic3r/GUI/MainFrame.cpp:1115
 msgid "&Export"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1055
+#: src/slic3r/GUI/MainFrame.cpp:1117
 msgid "Ejec&t SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1055
+#: src/slic3r/GUI/MainFrame.cpp:1117
 msgid "Eject SD card / Flash drive after the G-code was exported to it."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1063
+#: src/slic3r/GUI/MainFrame.cpp:1125
 msgid "Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1063
+#: src/slic3r/GUI/MainFrame.cpp:1125
 msgid "Slice a file into a G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1069
+#: src/slic3r/GUI/MainFrame.cpp:1131
 msgid "Quick Slice and Save As"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1069
+#: src/slic3r/GUI/MainFrame.cpp:1131
 msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1075
+#: src/slic3r/GUI/MainFrame.cpp:1137
 msgid "Repeat Last Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1075
+#: src/slic3r/GUI/MainFrame.cpp:1137
 msgid "Repeat last quick slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1083
+#: src/slic3r/GUI/MainFrame.cpp:1145
 msgid "(Re)Slice No&w"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1083
+#: src/slic3r/GUI/MainFrame.cpp:1145
 msgid "Start new slicing process"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1087
+#: src/slic3r/GUI/MainFrame.cpp:1149
 msgid "&Repair STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1087
+#: src/slic3r/GUI/MainFrame.cpp:1149
 msgid "Automatically repair an STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1091
+#: src/slic3r/GUI/MainFrame.cpp:1153
 msgid "&G-code preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264
+#: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414
 msgid "&Quit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264
+#: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414
 #, possible-c-format
 msgid "Quit %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1109
+#: src/slic3r/GUI/MainFrame.cpp:1183
 msgid "&Select all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1110
+#: src/slic3r/GUI/MainFrame.cpp:1184
 msgid "Selects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1112
+#: src/slic3r/GUI/MainFrame.cpp:1186
 msgid "D&eselect all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1113
+#: src/slic3r/GUI/MainFrame.cpp:1187
 msgid "Deselects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1116
+#: src/slic3r/GUI/MainFrame.cpp:1190
 msgid "&Delete selected"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1117
+#: src/slic3r/GUI/MainFrame.cpp:1191
 msgid "Deletes the current selection"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1119
+#: src/slic3r/GUI/MainFrame.cpp:1193
 msgid "Delete &all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1120
+#: src/slic3r/GUI/MainFrame.cpp:1194
 msgid "Deletes all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1124
+#: src/slic3r/GUI/MainFrame.cpp:1198
 msgid "&Undo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1127
+#: src/slic3r/GUI/MainFrame.cpp:1201
 msgid "&Redo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1132
+#: src/slic3r/GUI/MainFrame.cpp:1206
 msgid "&Copy"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1133
+#: src/slic3r/GUI/MainFrame.cpp:1207
 msgid "Copy selection to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1135
+#: src/slic3r/GUI/MainFrame.cpp:1209
 msgid "&Paste"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1136
+#: src/slic3r/GUI/MainFrame.cpp:1210
 msgid "Paste clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1141 src/slic3r/GUI/MainFrame.cpp:1145
-#: src/slic3r/GUI/MainFrame.cpp:1248 src/slic3r/GUI/MainFrame.cpp:1252
+#: src/slic3r/GUI/MainFrame.cpp:1214
 msgid "Re&load from disk"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1151
+#: src/slic3r/GUI/MainFrame.cpp:1215
+msgid "Reload the plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1219
 msgid "Searc&h"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1152
+#: src/slic3r/GUI/MainFrame.cpp:1220
 msgid "Search in settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1160
+#: src/slic3r/GUI/MainFrame.cpp:1228
 msgid "&Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1160
+#: src/slic3r/GUI/MainFrame.cpp:1228
 msgid "Show the plater"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1165
+#: src/slic3r/GUI/MainFrame.cpp:1233
 msgid "P&rint Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1165
+#: src/slic3r/GUI/MainFrame.cpp:1233
 msgid "Show the print settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1168 src/slic3r/GUI/MainFrame.cpp:1308
+#: src/slic3r/GUI/MainFrame.cpp:1236 src/slic3r/GUI/MainFrame.cpp:1463
 msgid "&Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1168
+#: src/slic3r/GUI/MainFrame.cpp:1236
 msgid "Show the filament settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1172
+#: src/slic3r/GUI/MainFrame.cpp:1240
 msgid "Print&er Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1172
+#: src/slic3r/GUI/MainFrame.cpp:1240
 msgid "Show the printer settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1178
+#: src/slic3r/GUI/MainFrame.cpp:1246
 msgid "3&D"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1178
+#: src/slic3r/GUI/MainFrame.cpp:1246
 msgid "Show the 3D editing view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1181
+#: src/slic3r/GUI/MainFrame.cpp:1249
 msgid "Pre&view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1181
+#: src/slic3r/GUI/MainFrame.cpp:1249
 msgid "Show the 3D slices preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1187
+#: src/slic3r/GUI/MainFrame.cpp:1270
 msgid "Print &Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1187
+#: src/slic3r/GUI/MainFrame.cpp:1270
 msgid "Display the Print Host Upload Queue window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1201
+#: src/slic3r/GUI/MainFrame.cpp:1306
 msgid "Show &labels"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1201
+#: src/slic3r/GUI/MainFrame.cpp:1306
 msgid "Show object/instance labels in 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1204
+#: src/slic3r/GUI/MainFrame.cpp:1309
 msgid "&Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1204 src/slic3r/GUI/Plater.cpp:2247
+#: src/slic3r/GUI/MainFrame.cpp:1309 src/slic3r/GUI/Plater.cpp:2235
 msgid "Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1216 src/slic3r/GUI/MainFrame.cpp:1279
+#: src/slic3r/GUI/MainFrame.cpp:1359 src/slic3r/GUI/MainFrame.cpp:1369
+#: src/slic3r/GUI/MainFrame.cpp:1429
 msgid "&File"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1217
+#: src/slic3r/GUI/MainFrame.cpp:1360 src/slic3r/GUI/MainFrame.cpp:1370
 msgid "&Edit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1218
+#: src/slic3r/GUI/MainFrame.cpp:1361 src/slic3r/GUI/MainFrame.cpp:1371
 msgid "&Window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1219 src/slic3r/GUI/MainFrame.cpp:1280
+#: src/slic3r/GUI/MainFrame.cpp:1362 src/slic3r/GUI/MainFrame.cpp:1372
+#: src/slic3r/GUI/MainFrame.cpp:1430
 msgid "&View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1222 src/slic3r/GUI/MainFrame.cpp:1283
+#: src/slic3r/GUI/MainFrame.cpp:1365 src/slic3r/GUI/MainFrame.cpp:1375
+#: src/slic3r/GUI/MainFrame.cpp:1435
 msgid "&Help"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1244
+#: src/slic3r/GUI/MainFrame.cpp:1403
 msgid "&Open G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1260
+#: src/slic3r/GUI/MainFrame.cpp:1403
+msgid "Open a G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1410
 msgid "Open &PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1305
+#: src/slic3r/GUI/MainFrame.cpp:1460
 msgid "E&xport"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1306
+#: src/slic3r/GUI/MainFrame.cpp:1461
 msgid "S&end to print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1308
+#: src/slic3r/GUI/MainFrame.cpp:1463
 msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1331
+#: src/slic3r/GUI/MainFrame.cpp:1486
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1342
+#: src/slic3r/GUI/MainFrame.cpp:1497
 msgid "No previously sliced file."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1348
+#: src/slic3r/GUI/MainFrame.cpp:1503
 msgid "Previously sliced file ("
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1348
+#: src/slic3r/GUI/MainFrame.cpp:1503
 msgid ") not found."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1349
+#: src/slic3r/GUI/MainFrame.cpp:1504
 msgid "File Not Found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1384
+#: src/slic3r/GUI/MainFrame.cpp:1539
 #, possible-c-format
 msgid "Save %s file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1384
+#: src/slic3r/GUI/MainFrame.cpp:1539
 msgid "SVG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1384
+#: src/slic3r/GUI/MainFrame.cpp:1539
 msgid "G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1396
+#: src/slic3r/GUI/MainFrame.cpp:1551
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1405 src/slic3r/GUI/Plater.cpp:3009
-#: src/slic3r/GUI/Plater.cpp:5581 src/slic3r/GUI/Tab.cpp:1575
-#: src/slic3r/GUI/Tab.cpp:4115
+#: src/slic3r/GUI/MainFrame.cpp:1560 src/slic3r/GUI/Plater.cpp:3013
+#: src/slic3r/GUI/Plater.cpp:5350 src/slic3r/GUI/Tab.cpp:1561
+#: src/slic3r/GUI/Tab.cpp:4078
 msgid "Slicing"
 msgstr ""
 
 #. TRN "Processing input_file_basename"
-#: src/slic3r/GUI/MainFrame.cpp:1407
+#: src/slic3r/GUI/MainFrame.cpp:1562
 #, possible-c-format
 msgid "Processing %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1430
+#: src/slic3r/GUI/MainFrame.cpp:1585
 msgid "%1% was successfully sliced."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1432
+#: src/slic3r/GUI/MainFrame.cpp:1587
 msgid "Slicing Done!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1447
+#: src/slic3r/GUI/MainFrame.cpp:1602
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1457
+#: src/slic3r/GUI/MainFrame.cpp:1612
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1469
+#: src/slic3r/GUI/MainFrame.cpp:1624
 msgid "Your file was repaired."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1469 src/libslic3r/PrintConfig.cpp:3735
+#: src/slic3r/GUI/MainFrame.cpp:1624 src/libslic3r/PrintConfig.cpp:3638
 msgid "Repair"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1483
+#: src/slic3r/GUI/MainFrame.cpp:1638
 msgid "Save configuration as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1502 src/slic3r/GUI/MainFrame.cpp:1564
+#: src/slic3r/GUI/MainFrame.cpp:1657 src/slic3r/GUI/MainFrame.cpp:1719
 msgid "Select configuration to load:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1538
+#: src/slic3r/GUI/MainFrame.cpp:1693
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1585
+#: src/slic3r/GUI/MainFrame.cpp:1740
 #, possible-c-format
 msgid "%d presets successfully imported."
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:461
+#: src/slic3r/GUI/Mouse3DController.cpp:462
 msgid "3Dconnexion settings"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:472
+#: src/slic3r/GUI/Mouse3DController.cpp:473
 msgid "Device:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:477
+#: src/slic3r/GUI/Mouse3DController.cpp:478
 msgid "Speed:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:480
-#: src/slic3r/GUI/Mouse3DController.cpp:501
+#: src/slic3r/GUI/Mouse3DController.cpp:481
+#: src/slic3r/GUI/Mouse3DController.cpp:502
 msgid "Translation"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:492
-#: src/slic3r/GUI/Mouse3DController.cpp:501
+#: src/slic3r/GUI/Mouse3DController.cpp:493
+#: src/slic3r/GUI/Mouse3DController.cpp:502
 msgid "Zoom"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:498
+#: src/slic3r/GUI/Mouse3DController.cpp:499
 msgid "Deadzone:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:513
+#: src/slic3r/GUI/Mouse3DController.cpp:514
 msgid "Options:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:516
+#: src/slic3r/GUI/Mouse3DController.cpp:517
 msgid "Swap Y/Z axes"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:70
+#: src/slic3r/GUI/MsgDialog.cpp:73
 #, possible-c-format
 msgid "%s error"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:71
+#: src/slic3r/GUI/MsgDialog.cpp:74
 #, possible-c-format
 msgid "%s has encountered an error"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:471
+#: src/slic3r/GUI/NotificationManager.hpp:395
 msgid "3D Mouse disconnected."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:474
+#: src/slic3r/GUI/NotificationManager.hpp:398
 msgid "Configuration update is available."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:474
+#: src/slic3r/GUI/NotificationManager.hpp:398
 msgid "See more."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:476
+#: src/slic3r/GUI/NotificationManager.hpp:400
 msgid "New version is available."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:476
+#: src/slic3r/GUI/NotificationManager.hpp:400
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:479
-msgid ""
-"You have just added a G-code for color change, but its value is empty.\n"
-"To export the G-code correctly, check the \"Color Change G-code\" in "
-"\"Printer Settings > Custom G-code\""
-msgstr ""
-
-#: src/slic3r/GUI/NotificationManager.cpp:490
-#: src/slic3r/GUI/NotificationManager.cpp:500
+#: src/slic3r/GUI/NotificationManager.cpp:387
+#: src/slic3r/GUI/NotificationManager.cpp:397
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:864
-#: src/slic3r/GUI/NotificationManager.cpp:1141
+#: src/slic3r/GUI/NotificationManager.cpp:690
+#: src/slic3r/GUI/NotificationManager.cpp:961
 msgid "Export G-Code."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:908
+#: src/slic3r/GUI/NotificationManager.cpp:734
 msgid "Open Folder."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:946
+#: src/slic3r/GUI/NotificationManager.cpp:772
 msgid "Eject drive"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1060
-#: src/slic3r/GUI/NotificationManager.cpp:1076
-#: src/slic3r/GUI/NotificationManager.cpp:1087
+#: src/slic3r/GUI/NotificationManager.cpp:880
+#: src/slic3r/GUI/NotificationManager.cpp:896
+#: src/slic3r/GUI/NotificationManager.cpp:907
 msgid "ERROR:"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1065
-#: src/slic3r/GUI/NotificationManager.cpp:1080
-#: src/slic3r/GUI/NotificationManager.cpp:1095
+#: src/slic3r/GUI/NotificationManager.cpp:885
+#: src/slic3r/GUI/NotificationManager.cpp:900
+#: src/slic3r/GUI/NotificationManager.cpp:915
 msgid "WARNING:"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1144
+#: src/slic3r/GUI/NotificationManager.cpp:964
 msgid "Slicing finished."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1186
+#: src/slic3r/GUI/NotificationManager.cpp:1007
 msgid "Exporting finished."
 msgstr ""
 
@@ -5033,8 +4839,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3962
-#: src/slic3r/GUI/Tab.cpp:4044
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3925
+#: src/slic3r/GUI/Tab.cpp:4007
 msgid "Layers"
 msgstr ""
 
@@ -5074,12 +4880,12 @@ msgstr ""
 msgid "Error loading shaders"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:335
+#: src/slic3r/GUI/OptionsGroup.cpp:328
 msgctxt "Layers"
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:335
+#: src/slic3r/GUI/OptionsGroup.cpp:328
 msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
@@ -5108,7 +4914,7 @@ msgstr ""
 msgid "Add preset for this printer device"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2064
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2037
 msgid "Print Host upload"
 msgstr ""
 
@@ -5147,7 +4953,7 @@ msgid "Open CA certificate file"
 msgstr ""
 
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395
-#: src/libslic3r/PrintConfig.cpp:124
+#: src/libslic3r/PrintConfig.cpp:120
 msgid "HTTPS CA File"
 msgstr ""
 
@@ -5190,676 +4996,645 @@ msgstr ""
 msgid "It's not possible to delete the last related preset for the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:163
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:626
+msgid "Infornation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:162
 msgid "Volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:164
+#: src/slic3r/GUI/Plater.cpp:163
 msgid "Facets"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:165
+#: src/slic3r/GUI/Plater.cpp:164
 msgid "Materials"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:168
+#: src/slic3r/GUI/Plater.cpp:167
 msgid "Manifold"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:218
+#: src/slic3r/GUI/Plater.cpp:217
 msgid "Sliced Info"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1151
+#: src/slic3r/GUI/Plater.cpp:236 src/slic3r/GUI/Plater.cpp:1143
 msgid "Used Filament (m)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1163
+#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1155
 msgid "Used Filament (mm³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1170
+#: src/slic3r/GUI/Plater.cpp:238
 msgid "Used Filament (g)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:240
+#: src/slic3r/GUI/Plater.cpp:239
 msgid "Used Material (unit)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:241
+#: src/slic3r/GUI/Plater.cpp:240
 msgid "Cost (money)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:243
+#: src/slic3r/GUI/Plater.cpp:242
 msgid "Number of tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:360
+#: src/slic3r/GUI/Plater.cpp:359
 msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:2128
-#: src/libslic3r/PrintConfig.cpp:2923
+#: src/slic3r/GUI/Plater.cpp:361 src/libslic3r/PrintConfig.cpp:2034
+#: src/libslic3r/PrintConfig.cpp:2829
 msgid "Support on build plate only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489
+#: src/slic3r/GUI/Plater.cpp:362 src/slic3r/GUI/Plater.cpp:485
 msgid "For support enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:364
+#: src/slic3r/GUI/Plater.cpp:363
 msgid "Everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:396 src/slic3r/GUI/Tab.cpp:1469
+#: src/slic3r/GUI/Plater.cpp:395 src/slic3r/GUI/Tab.cpp:1455
 msgid "Brim"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:398
+#: src/slic3r/GUI/Plater.cpp:397
 msgid ""
 "This flag enables the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:406
+#: src/slic3r/GUI/Plater.cpp:405
 msgid "Purging volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:503
+#: src/slic3r/GUI/Plater.cpp:499
 msgid "Select what kind of pad do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:505
+#: src/slic3r/GUI/Plater.cpp:501
 msgid "Below object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:506
+#: src/slic3r/GUI/Plater.cpp:502
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:695
+#: src/slic3r/GUI/Plater.cpp:687
 msgid "SLA print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:756 src/slic3r/GUI/Plater.cpp:6055
+#: src/slic3r/GUI/Plater.cpp:748 src/slic3r/GUI/Plater.cpp:5850
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:771 src/slic3r/GUI/Plater.cpp:3009
-#: src/slic3r/GUI/Plater.cpp:5584
+#: src/slic3r/GUI/Plater.cpp:763 src/slic3r/GUI/Plater.cpp:3013
+#: src/slic3r/GUI/Plater.cpp:5353
 msgid "Slice now"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:926
+#: src/slic3r/GUI/Plater.cpp:918
 msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1071
+#: src/slic3r/GUI/Plater.cpp:1063
 #, possible-c-format
 msgid "%d (%d shells)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1076
+#: src/slic3r/GUI/Plater.cpp:1068
 #, possible-c-format
 msgid "Auto-repaired (%d errors)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1079
+#: src/slic3r/GUI/Plater.cpp:1071
 #, possible-c-format
 msgid ""
 "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
 "facets reversed, %d backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1089
+#: src/slic3r/GUI/Plater.cpp:1081
 msgid "Yes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1110
+#: src/slic3r/GUI/Plater.cpp:1102
 msgid "Used Material (ml)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1113
+#: src/slic3r/GUI/Plater.cpp:1105
 msgid "object(s)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1113
+#: src/slic3r/GUI/Plater.cpp:1105
 msgid "supports and pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1151
+#: src/slic3r/GUI/Plater.cpp:1143
 msgid "Used Filament (in)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206
+#: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162
 msgid "objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206
+#: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162
 msgid "wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1163
+#: src/slic3r/GUI/Plater.cpp:1155
 msgid "Used Filament (in³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1189
-msgid "Filament at extruder %1%"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1195
-msgid "(including spool)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1204 src/libslic3r/PrintConfig.cpp:822
-#: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2739
+#: src/slic3r/GUI/Plater.cpp:1160 src/libslic3r/PrintConfig.cpp:803
+#: src/libslic3r/PrintConfig.cpp:2644 src/libslic3r/PrintConfig.cpp:2645
 msgid "Cost"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1222
+#: src/slic3r/GUI/Plater.cpp:1179 src/slic3r/GUI/Plater.cpp:1226
 msgid "normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1232
+#: src/slic3r/GUI/Plater.cpp:1189 src/slic3r/GUI/Plater.cpp:1237
 msgid "stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1403 src/slic3r/GUI/Plater.cpp:4923
+#: src/slic3r/GUI/Plater.cpp:1200 src/libslic3r/PrintConfig.cpp:625
+msgid "Color"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1410
 #, possible-c-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1410 src/slic3r/GUI/Plater.cpp:4930
+#: src/slic3r/GUI/Plater.cpp:1417
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1411 src/slic3r/GUI/Plater.cpp:4931
+#: src/slic3r/GUI/Plater.cpp:1418
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1412 src/slic3r/GUI/Plater.cpp:4932
+#: src/slic3r/GUI/Plater.cpp:1419
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1415 src/slic3r/GUI/Plater.cpp:4935
+#: src/slic3r/GUI/Plater.cpp:1422
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1416 src/slic3r/GUI/Plater.cpp:4936
+#: src/slic3r/GUI/Plater.cpp:1423
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1424 src/slic3r/GUI/Plater.cpp:4944
+#: src/slic3r/GUI/Plater.cpp:1431
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1469 src/slic3r/GUI/Plater.cpp:4981
+#: src/slic3r/GUI/Plater.cpp:1471
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1470 src/slic3r/GUI/Plater.cpp:4982
+#: src/slic3r/GUI/Plater.cpp:1472
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1524 src/slic3r/GUI/Plater.cpp:4796
-#: src/slic3r/GUI/Plater.cpp:5036
+#: src/slic3r/GUI/Plater.cpp:1528 src/slic3r/GUI/Plater.cpp:4753
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1546 src/slic3r/GUI/Plater.cpp:5058
-msgid "Load File"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1551 src/slic3r/GUI/Plater.cpp:5063
-msgid "Load Files"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1654
-msgid "Fill bed"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1660
+#: src/slic3r/GUI/Plater.cpp:1639
 msgid "Optimize Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1666
+#: src/slic3r/GUI/Plater.cpp:1645
 msgid "Import SLA archive"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2129
+#: src/slic3r/GUI/Plater.cpp:2123
 #, possible-c-format
 msgid ""
 "Successfully unmounted. The device %s(%s) can now be safely removed from the "
 "computer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2134
+#: src/slic3r/GUI/Plater.cpp:2126
 #, possible-c-format
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2153
+#: src/slic3r/GUI/Plater.cpp:2147
 msgid "New Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2246
+#: src/slic3r/GUI/Plater.cpp:2234
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2319
+#: src/slic3r/GUI/Plater.cpp:2307
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2329
+#: src/slic3r/GUI/Plater.cpp:2317
 msgid "Loading file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2415
+#: src/slic3r/GUI/Plater.cpp:2400
 #, possible-c-format
 msgid ""
 "Some object(s) in file %s looks like saved in inches.\n"
 "Should I consider them as a saved in inches and convert them?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2417
+#: src/slic3r/GUI/Plater.cpp:2402
 msgid "The object appears to be saved in inches"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2425
+#: src/slic3r/GUI/Plater.cpp:2410
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "this file as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2428 src/slic3r/GUI/Plater.cpp:2481
+#: src/slic3r/GUI/Plater.cpp:2413 src/slic3r/GUI/Plater.cpp:2466
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2435
+#: src/slic3r/GUI/Plater.cpp:2420
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2436
+#: src/slic3r/GUI/Plater.cpp:2421
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2458
+#: src/slic3r/GUI/Plater.cpp:2443
 #, possible-c-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2478
+#: src/slic3r/GUI/Plater.cpp:2463
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2494
+#: src/slic3r/GUI/Plater.cpp:2479
 msgid "Loaded"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596
+#: src/slic3r/GUI/Plater.cpp:2581
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2597
+#: src/slic3r/GUI/Plater.cpp:2582
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2659
+#: src/slic3r/GUI/Plater.cpp:2644
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2666
+#: src/slic3r/GUI/Plater.cpp:2651
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2672
+#: src/slic3r/GUI/Plater.cpp:2657
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2678
+#: src/slic3r/GUI/Plater.cpp:2663
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2774
+#: src/slic3r/GUI/Plater.cpp:2764
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2785
+#: src/slic3r/GUI/Plater.cpp:2775
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2857
+#: src/slic3r/GUI/Plater.cpp:2854
 msgid ""
 "The selected object can't be split because it contains more than one volume/"
 "material."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2868
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2993 src/slic3r/GUI/Plater.cpp:3723
+#: src/slic3r/GUI/Plater.cpp:2997 src/slic3r/GUI/Plater.cpp:3680
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3007
 msgid "Ready to slice"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3041 src/slic3r/GUI/PrintHostDialogs.cpp:264
+#: src/slic3r/GUI/Plater.cpp:3045 src/slic3r/GUI/PrintHostDialogs.cpp:260
 msgid "Cancelling"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3060
+#: src/slic3r/GUI/Plater.cpp:3064
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3177
+#: src/slic3r/GUI/Plater.cpp:3181
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3212
+#: src/slic3r/GUI/Plater.cpp:3216
 msgid "It is not allowed to change the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3212
+#: src/slic3r/GUI/Plater.cpp:3216
 msgid "Do you want to retry"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3230
+#: src/slic3r/GUI/Plater.cpp:3234
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3323
+#: src/slic3r/GUI/Plater.cpp:3325
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3328
+#: src/slic3r/GUI/Plater.cpp:3330
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3347
+#: src/slic3r/GUI/Plater.cpp:3349
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3374
-msgid ""
-"ERROR: Please close all manipulators available from the left toolbar before "
-"fixing the mesh."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3380
-msgid "Fix through NetFabb"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3397
-msgid "Custom supports and seams were removed after repairing the mesh."
+#: src/slic3r/GUI/Plater.cpp:3370
+msgid "Fix Throught NetFabb"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3680
+#: src/slic3r/GUI/Plater.cpp:3638
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3691
+#: src/slic3r/GUI/Plater.cpp:3649
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3731 src/slic3r/GUI/PrintHostDialogs.cpp:265
+#: src/slic3r/GUI/Plater.cpp:3688 src/slic3r/GUI/PrintHostDialogs.cpp:261
 msgid "Cancelled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3998 src/slic3r/GUI/Plater.cpp:4022
+#: src/slic3r/GUI/Plater.cpp:3950 src/slic3r/GUI/Plater.cpp:3972
 msgid "Remove the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4007
+#: src/slic3r/GUI/Plater.cpp:3959
 msgid "Add one more instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4009
+#: src/slic3r/GUI/Plater.cpp:3961
 msgid "Remove one instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4011
+#: src/slic3r/GUI/Plater.cpp:3963
 msgid "Set number of instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4011
+#: src/slic3r/GUI/Plater.cpp:3963
 msgid "Change the number of instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4013
-msgid "Fill bed with instances"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:4013
-msgid "Fill the remaining area of bed with instances of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:4032
+#: src/slic3r/GUI/Plater.cpp:3982
 msgid "Reload the selected object from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4035
+#: src/slic3r/GUI/Plater.cpp:3985
 msgid "Export the selected object as STL file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4065
+#: src/slic3r/GUI/Plater.cpp:4016
 msgid "Along X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4065
+#: src/slic3r/GUI/Plater.cpp:4016
 msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4067
+#: src/slic3r/GUI/Plater.cpp:4018
 msgid "Along Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4067
+#: src/slic3r/GUI/Plater.cpp:4018
 msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4069
+#: src/slic3r/GUI/Plater.cpp:4020
 msgid "Along Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4069
+#: src/slic3r/GUI/Plater.cpp:4020
 msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4072
+#: src/slic3r/GUI/Plater.cpp:4023
 msgid "Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4072
+#: src/slic3r/GUI/Plater.cpp:4023
 msgid "Mirror the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4084
+#: src/slic3r/GUI/Plater.cpp:4035
 msgid "To objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4084 src/slic3r/GUI/Plater.cpp:4104
+#: src/slic3r/GUI/Plater.cpp:4035 src/slic3r/GUI/Plater.cpp:4055
 msgid "Split the selected object into individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4086
+#: src/slic3r/GUI/Plater.cpp:4037
 msgid "To parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4086 src/slic3r/GUI/Plater.cpp:4122
+#: src/slic3r/GUI/Plater.cpp:4037 src/slic3r/GUI/Plater.cpp:4073
 msgid "Split the selected object into individual sub-parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4089 src/slic3r/GUI/Plater.cpp:4104
-#: src/slic3r/GUI/Plater.cpp:4122 src/libslic3r/PrintConfig.cpp:3759
+#: src/slic3r/GUI/Plater.cpp:4040 src/slic3r/GUI/Plater.cpp:4055
+#: src/slic3r/GUI/Plater.cpp:4073 src/libslic3r/PrintConfig.cpp:3662
 msgid "Split"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4089
+#: src/slic3r/GUI/Plater.cpp:4040
 msgid "Split the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4111
+#: src/slic3r/GUI/Plater.cpp:4062
 msgid "Optimize orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4112
+#: src/slic3r/GUI/Plater.cpp:4063
 msgid "Optimize the rotation of the object for better print results."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4192
+#: src/slic3r/GUI/Plater.cpp:4145
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4564
+#: src/slic3r/GUI/Plater.cpp:4521
 msgid ""
 "%1% printer was active at the time the target Undo / Redo snapshot was "
 "taken. Switching to %1% printer requires reloading of %1% presets."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4768
+#: src/slic3r/GUI/Plater.cpp:4725
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4800
+#: src/slic3r/GUI/Plater.cpp:4757
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4868
+#: src/slic3r/GUI/Plater.cpp:4827
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4868
+#: src/slic3r/GUI/Plater.cpp:4827
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4869
+#: src/slic3r/GUI/Plater.cpp:4828
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5107
+#: src/slic3r/GUI/Plater.cpp:4882
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5115
+#: src/slic3r/GUI/Plater.cpp:4890
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5123
+#: src/slic3r/GUI/Plater.cpp:4898
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5157
+#: src/slic3r/GUI/Plater.cpp:4932
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5188
+#: src/slic3r/GUI/Plater.cpp:4963
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5189
+#: src/slic3r/GUI/Plater.cpp:4964
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5193
+#: src/slic3r/GUI/Plater.cpp:4968
 #, possible-c-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5259
+#: src/slic3r/GUI/Plater.cpp:5029
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5316
+#: src/slic3r/GUI/Plater.cpp:5083
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5316
+#: src/slic3r/GUI/Plater.cpp:5083
 msgid "Save SL1 file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5230
 #, possible-c-format
 msgid "STL file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5480
+#: src/slic3r/GUI/Plater.cpp:5247
 #, possible-c-format
 msgid "AMF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5250
 #, possible-c-format
 msgid "Error exporting AMF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5512
+#: src/slic3r/GUI/Plater.cpp:5279
 #, possible-c-format
 msgid "3MF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5284
 #, possible-c-format
 msgid "Error exporting 3MF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6054
+#: src/slic3r/GUI/Plater.cpp:5849
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6149
+#: src/slic3r/GUI/Plater.cpp:5946
 msgid "Paste From Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:56 src/slic3r/GUI/Tab.cpp:2098
-#: src/slic3r/GUI/Tab.cpp:2285 src/slic3r/GUI/Tab.cpp:2393
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1080
+#: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2071
+#: src/slic3r/GUI/Tab.cpp:2253 src/slic3r/GUI/Tab.cpp:2361
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
 msgid "General"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:69
+#: src/slic3r/GUI/Preferences.cpp:52
 msgid "Remember output directory"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:71
+#: src/slic3r/GUI/Preferences.cpp:54
 msgid ""
 "If this is enabled, Slic3r will prompt the last output directory instead of "
 "the one containing the input files."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:77
+#: src/slic3r/GUI/Preferences.cpp:64
 msgid "Auto-center parts"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:79
+#: src/slic3r/GUI/Preferences.cpp:66
 msgid ""
 "If this is enabled, Slic3r will auto-center objects around the print bed "
 "center."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:85
+#: src/slic3r/GUI/Preferences.cpp:72
 msgid "Background processing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:87
+#: src/slic3r/GUI/Preferences.cpp:74
 msgid ""
 "If this is enabled, Slic3r will pre-process objects as soon as they're "
 "loaded in order to save time when exporting G-code."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:96
+#: src/slic3r/GUI/Preferences.cpp:83
 msgid ""
 "If enabled, PrusaSlicer will check for the new versions of itself online. "
 "When a new version becomes available a notification is displayed at the next "
@@ -5867,25 +5642,17 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:102
+#: src/slic3r/GUI/Preferences.cpp:89
 msgid "Export sources full pathnames to 3mf and amf"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:104
+#: src/slic3r/GUI/Preferences.cpp:91
 msgid ""
 "If enabled, allows the Reload from disk command to automatically find and "
 "load the files when invoked."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:114
-msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:121
-msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:131
+#: src/slic3r/GUI/Preferences.cpp:99
 msgid ""
 "If enabled, Slic3r downloads updates of built-in system presets in the "
 "background. These updates are downloaded into a separate temporary location. "
@@ -5893,511 +5660,476 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:136
+#: src/slic3r/GUI/Preferences.cpp:104
 msgid "Suppress \" - default - \" presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:138
+#: src/slic3r/GUI/Preferences.cpp:106
 msgid ""
 "Suppress \" - default - \" presets in the Print / Filament / Printer "
 "selections once there are any other valid presets available."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:144
+#: src/slic3r/GUI/Preferences.cpp:112
 msgid "Show incompatible print and filament presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:146
+#: src/slic3r/GUI/Preferences.cpp:114
 msgid ""
 "When checked, the print and filament presets are shown in the preset editor "
 "even if they are marked as incompatible with the active printer"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:152
+#: src/slic3r/GUI/Preferences.cpp:120
 msgid "Show drop project dialog"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:154
+#: src/slic3r/GUI/Preferences.cpp:122
 msgid ""
 "When checked, whenever dragging and dropping a project file on the "
 "application, shows a dialog asking to select the action to take on the file "
 "to load."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:161 src/slic3r/GUI/Preferences.cpp:165
-msgid "Allow just a single PrusaSlicer instance"
+#: src/slic3r/GUI/Preferences.cpp:127 src/libslic3r/PrintConfig.cpp:3689
+msgid "Single instance mode"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:163
+#: src/slic3r/GUI/Preferences.cpp:130
 msgid ""
 "On OSX there is always only one instance of app running by default. However "
 "it is allowed to run multiple instances of same app from the command line. "
 "In such case this settings will allow only one instance."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:167
+#: src/slic3r/GUI/Preferences.cpp:132
 msgid ""
 "If this is enabled, when starting PrusaSlicer and another instance of the "
 "same PrusaSlicer is already running, that instance will be reactivated "
 "instead."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:173
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:671
-msgid "Ask for unsaved changes when closing application"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:175
-msgid "When closing the application, always ask for unsaved changes"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:180
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:672
-msgid "Ask for unsaved changes when selecting new preset"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:182
-msgid "Always ask for unsaved changes when selecting new preset"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:190
-msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
+#: src/slic3r/GUI/Preferences.cpp:142
+msgid "Use Retina resolution for the 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:192
+#: src/slic3r/GUI/Preferences.cpp:144
 msgid ""
-"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
-"gcode files."
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:201
-msgid "Use Retina resolution for the 3D scene"
+#: src/slic3r/GUI/Preferences.cpp:161
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
+msgid "Ask for unsaved changes when closing application"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:203
-msgid ""
-"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
-"experiencing 3D performance problems, disabling this option may help."
+#: src/slic3r/GUI/Preferences.cpp:163
+msgid "When closing the application, always ask for unsaved changes"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:211 src/slic3r/GUI/Preferences.cpp:213
-msgid "Show splash screen"
+#: src/slic3r/GUI/Preferences.cpp:168
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+msgid "Ask for unsaved changes when selecting new preset"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:220
-msgid "Enable support for legacy 3DConnexion devices"
+#: src/slic3r/GUI/Preferences.cpp:170
+msgid "Always ask for unsaved changes when selecting new preset"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:222
-msgid ""
-"If enabled, the legacy 3DConnexion devices settings dialog is available by "
-"pressing CTRL+M"
+#: src/slic3r/GUI/Preferences.cpp:176 src/slic3r/GUI/Preferences.cpp:178
+msgid "Show splash screen"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:232
+#: src/slic3r/GUI/Preferences.cpp:185
 msgid "Camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:237
+#: src/slic3r/GUI/Preferences.cpp:191
 msgid "Use perspective camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:239
+#: src/slic3r/GUI/Preferences.cpp:193
 msgid ""
 "If enabled, use perspective camera. If not enabled, use orthographic camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:244
+#: src/slic3r/GUI/Preferences.cpp:198
 msgid "Use free camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:246
+#: src/slic3r/GUI/Preferences.cpp:200
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:251
+#: src/slic3r/GUI/Preferences.cpp:205
 msgid "Reverse direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:253
+#: src/slic3r/GUI/Preferences.cpp:207
 msgid "If enabled, reverses the direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:261
+#: src/slic3r/GUI/Preferences.cpp:214
 msgid "GUI"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:276
-msgid "Sequential slider applied only to top layer"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:278
-msgid ""
-"If enabled, changes made using the sequential slider, in preview, apply only "
-"to gcode top layer. If disabled, changes made using the sequential slider, "
-"in preview, apply to the whole gcode."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:285
+#: src/slic3r/GUI/Preferences.cpp:227
 msgid "Show sidebar collapse/expand button"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/Preferences.cpp:229
 msgid ""
 "If enabled, the button for the collapse sidebar will be appeared in top "
 "right corner of the 3D Scene"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:292
-msgid "Suppress to open hyperlink in browser"
+#: src/slic3r/GUI/Preferences.cpp:234
+msgid "Use custom size for toolbar icons"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:294
-msgid ""
-"If enabled, the descriptions of configuration parameters in settings tabs "
-"wouldn't work as hyperlinks. If disabled, the descriptions of configuration "
-"parameters in settings tabs will work as hyperlinks."
+#: src/slic3r/GUI/Preferences.cpp:236
+msgid "If enabled, you can change size of toolbar icons manually."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:300
-msgid "Use custom size for toolbar icons"
+#: src/slic3r/GUI/Preferences.cpp:243
+msgid "Sequential slider applied only to top layer"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:302
-msgid "If enabled, you can change size of toolbar icons manually."
+#: src/slic3r/GUI/Preferences.cpp:245
+msgid ""
+"If enabled, changes made using the sequential slider, in preview, apply only "
+"to gcode top layer. If disabled, changes made using the sequential slider, "
+"in preview, apply to the whole gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:320
+#: src/slic3r/GUI/Preferences.cpp:269
 msgid "Render"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:325
+#: src/slic3r/GUI/Preferences.cpp:275
 msgid "Use environment map"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:327
+#: src/slic3r/GUI/Preferences.cpp:277
 msgid "If enabled, renders object using the environment map."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:352
+#: src/slic3r/GUI/Preferences.cpp:313
 #, possible-c-format
 msgid "You need to restart %s to make the changes effective."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:427
+#: src/slic3r/GUI/Preferences.cpp:390
 msgid "Icon size in a respect to the default size"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:442
+#: src/slic3r/GUI/Preferences.cpp:405
 msgid "Select toolbar icon size in respect to the default one."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:473
+#: src/slic3r/GUI/Preferences.cpp:436
 msgid "Old regular layout with the tab bar"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:474
+#: src/slic3r/GUI/Preferences.cpp:437
 msgid "New layout, access via settings button in the top menu"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:475
+#: src/slic3r/GUI/Preferences.cpp:438
 msgid "Settings in non-modal window"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:484
+#: src/slic3r/GUI/Preferences.cpp:447
 msgid "Layout Options"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:197
-#: src/slic3r/GUI/PresetComboBoxes.cpp:235
-#: src/slic3r/GUI/PresetComboBoxes.cpp:761
-#: src/slic3r/GUI/PresetComboBoxes.cpp:811
-#: src/slic3r/GUI/PresetComboBoxes.cpp:925
-#: src/slic3r/GUI/PresetComboBoxes.cpp:969
+#: src/slic3r/GUI/PresetComboBoxes.cpp:188
+#: src/slic3r/GUI/PresetComboBoxes.cpp:226
+#: src/slic3r/GUI/PresetComboBoxes.cpp:752
+#: src/slic3r/GUI/PresetComboBoxes.cpp:802
+#: src/slic3r/GUI/PresetComboBoxes.cpp:916
+#: src/slic3r/GUI/PresetComboBoxes.cpp:960
 msgid "System presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:239
-#: src/slic3r/GUI/PresetComboBoxes.cpp:815
-#: src/slic3r/GUI/PresetComboBoxes.cpp:973
+#: src/slic3r/GUI/PresetComboBoxes.cpp:230
+#: src/slic3r/GUI/PresetComboBoxes.cpp:806
+#: src/slic3r/GUI/PresetComboBoxes.cpp:964
 msgid "User presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:250
+#: src/slic3r/GUI/PresetComboBoxes.cpp:241
 msgid "Incompatible presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:285
+#: src/slic3r/GUI/PresetComboBoxes.cpp:276
 msgid "Are you sure you want to delete \"%1%\" printer?"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:287
+#: src/slic3r/GUI/PresetComboBoxes.cpp:278
 msgid "Delete Physical Printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:624
+#: src/slic3r/GUI/PresetComboBoxes.cpp:615
 msgid "Click to edit preset"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:680
-#: src/slic3r/GUI/PresetComboBoxes.cpp:710
+#: src/slic3r/GUI/PresetComboBoxes.cpp:671
+#: src/slic3r/GUI/PresetComboBoxes.cpp:701
 msgid "Add/Remove presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:685
-#: src/slic3r/GUI/PresetComboBoxes.cpp:715 src/slic3r/GUI/Tab.cpp:2990
+#: src/slic3r/GUI/PresetComboBoxes.cpp:676
+#: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:2958
 msgid "Add physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:699
+#: src/slic3r/GUI/PresetComboBoxes.cpp:690
 msgid "Edit preset"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:703 src/slic3r/GUI/Tab.cpp:2990
+#: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:2958
 msgid "Edit physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:706
+#: src/slic3r/GUI/PresetComboBoxes.cpp:697
 msgid "Delete physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:826
-#: src/slic3r/GUI/PresetComboBoxes.cpp:987
+#: src/slic3r/GUI/PresetComboBoxes.cpp:817
+#: src/slic3r/GUI/PresetComboBoxes.cpp:978
 msgid "Physical printers"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:850
+#: src/slic3r/GUI/PresetComboBoxes.cpp:841
 msgid "Add/Remove filaments"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:852
+#: src/slic3r/GUI/PresetComboBoxes.cpp:843
 msgid "Add/Remove materials"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:854
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1011
+#: src/slic3r/GUI/PresetComboBoxes.cpp:845
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1002
 msgid "Add/Remove printers"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:32
+#: src/slic3r/GUI/PresetHints.cpp:28
 msgid ""
 "If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
 "speed will be reduced so that no less than %3%s are spent on that layer "
 "(however, speed will never be reduced below %4%mm/s)."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:39
+#: src/slic3r/GUI/PresetHints.cpp:35
 msgid ""
 "If estimated layer time is greater, but still below ~%1%s, fan will run at a "
 "proportionally decreasing speed between %2%%% and %3%%%."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:49
-msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
+#: src/slic3r/GUI/PresetHints.cpp:39
+msgid "During the other layers, fan"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:51
-msgid "During the other layers, fan will always run at %1%%%"
+#: src/slic3r/GUI/PresetHints.cpp:41
+msgid "Fan"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:51
-msgid "Fan will always run at %1%%%"
+#: src/slic3r/GUI/PresetHints.cpp:47
+msgid "will always run at %1%%%"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:53
+#: src/slic3r/GUI/PresetHints.cpp:50
 msgid "except for the first %1% layers."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:55
+#: src/slic3r/GUI/PresetHints.cpp:52
 msgid "except for the first layer."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:58
-msgid "During the other layers, fan will be turned off."
+#: src/slic3r/GUI/PresetHints.cpp:54
+msgid "will be turned off."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:58
-msgid "Fan will be turned off."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:159
+#: src/slic3r/GUI/PresetHints.cpp:155
 msgid "external perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:168
+#: src/slic3r/GUI/PresetHints.cpp:164
 msgid "perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:177
+#: src/slic3r/GUI/PresetHints.cpp:173
 msgid "infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:187
+#: src/slic3r/GUI/PresetHints.cpp:183
 msgid "solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:195
+#: src/slic3r/GUI/PresetHints.cpp:191
 msgid "top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:206
+#: src/slic3r/GUI/PresetHints.cpp:202
 msgid "support"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:216
+#: src/slic3r/GUI/PresetHints.cpp:212
 msgid "support interface"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:222
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "First layer volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:222
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "Bridging volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:222
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "Volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:223
+#: src/slic3r/GUI/PresetHints.cpp:219
 msgid "flow rate is maximized"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:226
+#: src/slic3r/GUI/PresetHints.cpp:222
 msgid "by the print profile maximum"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:227
+#: src/slic3r/GUI/PresetHints.cpp:223
 msgid "when printing"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:228
+#: src/slic3r/GUI/PresetHints.cpp:224
 msgid "with a volumetric rate"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:232
+#: src/slic3r/GUI/PresetHints.cpp:228
 #, possible-c-format
 msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:250
+#: src/slic3r/GUI/PresetHints.cpp:246
 msgid ""
 "Recommended object thin wall thickness: Not available due to invalid layer "
 "height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:266
+#: src/slic3r/GUI/PresetHints.cpp:262
 #, possible-c-format
 msgid "Recommended object thin wall thickness for layer height %.2f and"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:273
+#: src/slic3r/GUI/PresetHints.cpp:269
 #, possible-c-format
 msgid "%d lines: %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:277
+#: src/slic3r/GUI/PresetHints.cpp:273
 msgid ""
 "Recommended object thin wall thickness: Not available due to excessively "
 "small extrusion width."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:306
+#: src/slic3r/GUI/PresetHints.cpp:302
 msgid ""
 "Top / bottom shell thickness hint: Not available due to invalid layer height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:319
+#: src/slic3r/GUI/PresetHints.cpp:315
 msgid "Top shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:322
+#: src/slic3r/GUI/PresetHints.cpp:318
 msgid "Minimum top shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:325
+#: src/slic3r/GUI/PresetHints.cpp:321
 msgid "Top is open."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:338
+#: src/slic3r/GUI/PresetHints.cpp:334
 msgid "Bottom shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:341
+#: src/slic3r/GUI/PresetHints.cpp:337
 msgid "Minimum bottom shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:344
+#: src/slic3r/GUI/PresetHints.cpp:340
 msgid "Bottom is open."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:35
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
 msgid "Send G-Code to printer host"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:35
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:37
+#: src/slic3r/GUI/PrintHostDialogs.cpp:36
 msgid "Start printing after upload"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:45
+#: src/slic3r/GUI/PrintHostDialogs.cpp:44
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:58
+#: src/slic3r/GUI/PrintHostDialogs.cpp:57
 msgid "Group"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:176
+#: src/slic3r/GUI/PrintHostDialogs.cpp:174
 msgid "ID"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:177
+#: src/slic3r/GUI/PrintHostDialogs.cpp:175
 msgid "Progress"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:178
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
 msgid "Status"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:179
+#: src/slic3r/GUI/PrintHostDialogs.cpp:177
 msgid "Host"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:180
+#: src/slic3r/GUI/PrintHostDialogs.cpp:178
 msgid "Filename"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:181
+#: src/slic3r/GUI/PrintHostDialogs.cpp:179
 msgid "Error Message"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:184
+#: src/slic3r/GUI/PrintHostDialogs.cpp:182
 msgid "Cancel selected"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:186
+#: src/slic3r/GUI/PrintHostDialogs.cpp:184
 msgid "Show error message"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:228
-#: src/slic3r/GUI/PrintHostDialogs.cpp:261
+#: src/slic3r/GUI/PrintHostDialogs.cpp:226
+#: src/slic3r/GUI/PrintHostDialogs.cpp:257
 msgid "Enqueued"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:262
+#: src/slic3r/GUI/PrintHostDialogs.cpp:258
 msgid "Uploading"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:266
+#: src/slic3r/GUI/PrintHostDialogs.cpp:262
 msgid "Completed"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:304
+#: src/slic3r/GUI/PrintHostDialogs.cpp:300
 msgid "Error uploading to print host:"
 msgstr ""
 
@@ -6406,12 +6138,12 @@ msgid "NO RAMMING AT ALL"
 msgstr ""
 
 #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
-#: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:750
-#: src/libslic3r/PrintConfig.cpp:765 src/libslic3r/PrintConfig.cpp:2636
-#: src/libslic3r/PrintConfig.cpp:2645 src/libslic3r/PrintConfig.cpp:2755
-#: src/libslic3r/PrintConfig.cpp:2763 src/libslic3r/PrintConfig.cpp:2771
-#: src/libslic3r/PrintConfig.cpp:2778 src/libslic3r/PrintConfig.cpp:2786
-#: src/libslic3r/PrintConfig.cpp:2794
+#: src/libslic3r/PrintConfig.cpp:687 src/libslic3r/PrintConfig.cpp:731
+#: src/libslic3r/PrintConfig.cpp:746 src/libslic3r/PrintConfig.cpp:2542
+#: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2661
+#: src/libslic3r/PrintConfig.cpp:2669 src/libslic3r/PrintConfig.cpp:2677
+#: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2692
+#: src/libslic3r/PrintConfig.cpp:2700
 msgid "s"
 msgstr ""
 
@@ -6419,8 +6151,8 @@ msgstr ""
 msgid "Volumetric speed"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:663
-#: src/libslic3r/PrintConfig.cpp:1458
+#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:644
+#: src/libslic3r/PrintConfig.cpp:1367
 msgid "mm³/s"
 msgstr ""
 
@@ -6451,7 +6183,7 @@ msgstr ""
 
 #: src/slic3r/GUI/SavePresetDialog.cpp:136
 msgid ""
-"Preset with name \"%1%\" already exists and is incompatible with selected "
+"Preset with name \"%1%\" already exists and is imcopatible with selected "
 "printer."
 msgstr ""
 
@@ -6463,429 +6195,421 @@ msgstr ""
 msgid "The name cannot be empty."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:147
-msgid "The name cannot start with space character."
-msgstr ""
-
-#: src/slic3r/GUI/SavePresetDialog.cpp:152
-msgid "The name cannot end with space character."
-msgstr ""
-
-#: src/slic3r/GUI/SavePresetDialog.cpp:186
-#: src/slic3r/GUI/SavePresetDialog.cpp:192
+#: src/slic3r/GUI/SavePresetDialog.cpp:176
+#: src/slic3r/GUI/SavePresetDialog.cpp:182
 msgid "Save preset"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:215
+#: src/slic3r/GUI/SavePresetDialog.cpp:205
 msgctxt "PresetName"
 msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:273
+#: src/slic3r/GUI/SavePresetDialog.cpp:263
 msgid ""
 "You have selected physical printer \"%1%\" \n"
 "with related printer preset \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:306
+#: src/slic3r/GUI/SavePresetDialog.cpp:296
 msgid "What would you like to do with \"%1%\" preset after saving?"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:309
+#: src/slic3r/GUI/SavePresetDialog.cpp:299
 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:310
+#: src/slic3r/GUI/SavePresetDialog.cpp:300
 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:311
+#: src/slic3r/GUI/SavePresetDialog.cpp:301
 msgid "Just switch to \"%1%\" preset"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2421
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2389
 msgid "Stealth"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2415
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2383
 msgid "Normal"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:172
+#: src/slic3r/GUI/Selection.cpp:191
 msgid "Selection-Add"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:213
+#: src/slic3r/GUI/Selection.cpp:232
 msgid "Selection-Remove"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:245
+#: src/slic3r/GUI/Selection.cpp:264
 msgid "Selection-Add Object"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:264
+#: src/slic3r/GUI/Selection.cpp:283
 msgid "Selection-Remove Object"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:282
+#: src/slic3r/GUI/Selection.cpp:301
 msgid "Selection-Add Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:301
+#: src/slic3r/GUI/Selection.cpp:320
 msgid "Selection-Remove Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:402
+#: src/slic3r/GUI/Selection.cpp:421
 msgid "Selection-Add All"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:428
+#: src/slic3r/GUI/Selection.cpp:447
 msgid "Selection-Remove All"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:960
+#: src/slic3r/GUI/Selection.cpp:1006
 msgid "Scale To Fit"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1487
+#: src/slic3r/GUI/Selection.cpp:1533
 msgid "Set Printable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1487
+#: src/slic3r/GUI/Selection.cpp:1533
 msgid "Set Unprintable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:82
+#: src/slic3r/GUI/SysInfoDialog.cpp:90 src/slic3r/GUI/SysInfoDialog.cpp:92
 msgid "System Information"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:158
+#: src/slic3r/GUI/SysInfoDialog.cpp:177
 msgid "Copy to Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:109 src/libslic3r/PrintConfig.cpp:321
+#: src/slic3r/GUI/Tab.cpp:111 src/libslic3r/PrintConfig.cpp:306
 msgid "Compatible printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:110
+#: src/slic3r/GUI/Tab.cpp:112
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:115 src/libslic3r/PrintConfig.cpp:336
+#: src/slic3r/GUI/Tab.cpp:117 src/libslic3r/PrintConfig.cpp:321
 msgid "Compatible print profiles"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:116
+#: src/slic3r/GUI/Tab.cpp:118
 msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
 #. TRN "Save current Settings"
-#: src/slic3r/GUI/Tab.cpp:211
+#: src/slic3r/GUI/Tab.cpp:213
 #, possible-c-format
 msgid "Save current %s"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:212
+#: src/slic3r/GUI/Tab.cpp:214
 msgid "Delete this preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:216
+#: src/slic3r/GUI/Tab.cpp:218
 msgid ""
 "Hover the cursor over buttons to find more information \n"
 "or click this button."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:220
+#: src/slic3r/GUI/Tab.cpp:222
 msgid "Search in settings [%1%]"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1237
+#: src/slic3r/GUI/Tab.cpp:1228
 msgid "Detach from system preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1250
+#: src/slic3r/GUI/Tab.cpp:1241
 msgid ""
 "A copy of the current system preset will be created, which will be detached "
 "from the system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1251
+#: src/slic3r/GUI/Tab.cpp:1242
 msgid ""
 "The current custom preset will be detached from the parent system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1254
+#: src/slic3r/GUI/Tab.cpp:1245
 msgid "Modifications to the current profile will be saved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1257
+#: src/slic3r/GUI/Tab.cpp:1248
 msgid ""
 "This action is not revertable.\n"
 "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1259
+#: src/slic3r/GUI/Tab.cpp:1250
 msgid "Detach preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1285
+#: src/slic3r/GUI/Tab.cpp:1276
 msgid "This is a default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1287
+#: src/slic3r/GUI/Tab.cpp:1278
 msgid "This is a system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1289
+#: src/slic3r/GUI/Tab.cpp:1280
 msgid "Current preset is inherited from the default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1293
+#: src/slic3r/GUI/Tab.cpp:1282
 msgid "Current preset is inherited from"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1297
+#: src/slic3r/GUI/Tab.cpp:1286
 msgid "It can't be deleted or modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1298
+#: src/slic3r/GUI/Tab.cpp:1287
 msgid ""
 "Any modifications should be saved as a new preset inherited from this one."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1299
+#: src/slic3r/GUI/Tab.cpp:1288
 msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1303
+#: src/slic3r/GUI/Tab.cpp:1292
 msgid "Additional information:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1309
+#: src/slic3r/GUI/Tab.cpp:1298
 msgid "printer model"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1317
+#: src/slic3r/GUI/Tab.cpp:1306
 msgid "default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1320
+#: src/slic3r/GUI/Tab.cpp:1309
 msgid "default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1334
+#: src/slic3r/GUI/Tab.cpp:1323
 msgid "default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1338
+#: src/slic3r/GUI/Tab.cpp:1327
 msgid "default SLA print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1346
+#: src/slic3r/GUI/Tab.cpp:1335
 msgid "full profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1347
+#: src/slic3r/GUI/Tab.cpp:1336
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1385 src/slic3r/GUI/Tab.cpp:4042
+#: src/slic3r/GUI/Tab.cpp:1374 src/slic3r/GUI/Tab.cpp:4005
 msgid "Layers and perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1391
+#: src/slic3r/GUI/Tab.cpp:1380
 msgid "Vertical shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1403
+#: src/slic3r/GUI/Tab.cpp:1392
 msgid "Horizontal shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1404 src/libslic3r/PrintConfig.cpp:1980
+#: src/slic3r/GUI/Tab.cpp:1393 src/libslic3r/PrintConfig.cpp:1886
 msgid "Solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1409
+#: src/slic3r/GUI/Tab.cpp:1398
 msgid "Minimum shell thickness"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1420
+#: src/slic3r/GUI/Tab.cpp:1409
 msgid "Quality (slower slicing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1448
+#: src/slic3r/GUI/Tab.cpp:1434
 msgid "Reducing printing time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1460
+#: src/slic3r/GUI/Tab.cpp:1446
 msgid "Skirt and brim"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1480
+#: src/slic3r/GUI/Tab.cpp:1466
 msgid "Raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1484
+#: src/slic3r/GUI/Tab.cpp:1470
 msgid "Options for support material and raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1499
+#: src/slic3r/GUI/Tab.cpp:1485
 msgid "Speed for print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1512
+#: src/slic3r/GUI/Tab.cpp:1498
 msgid "Speed for non-print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1515
+#: src/slic3r/GUI/Tab.cpp:1501
 msgid "Modifiers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1518
+#: src/slic3r/GUI/Tab.cpp:1504
 msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1525
+#: src/slic3r/GUI/Tab.cpp:1511
 msgid "Autospeed (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1533
+#: src/slic3r/GUI/Tab.cpp:1519
 msgid "Multiple Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1541
+#: src/slic3r/GUI/Tab.cpp:1527
 msgid "Ooze prevention"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1559
+#: src/slic3r/GUI/Tab.cpp:1545
 msgid "Extrusion width"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1569
+#: src/slic3r/GUI/Tab.cpp:1555
 msgid "Overlap"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1572
+#: src/slic3r/GUI/Tab.cpp:1558
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1581
+#: src/slic3r/GUI/Tab.cpp:1567
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1584 src/slic3r/GUI/Tab.cpp:4118
+#: src/slic3r/GUI/Tab.cpp:1570 src/slic3r/GUI/Tab.cpp:4081
 msgid "Output options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1585
+#: src/slic3r/GUI/Tab.cpp:1571
 msgid "Sequential printing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1587
-msgid "Extruder clearance"
+#: src/slic3r/GUI/Tab.cpp:1573
+msgid "Extruder clearance (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1592 src/slic3r/GUI/Tab.cpp:4119
+#: src/slic3r/GUI/Tab.cpp:1578 src/slic3r/GUI/Tab.cpp:4082
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1599 src/libslic3r/PrintConfig.cpp:1662
+#: src/slic3r/GUI/Tab.cpp:1585 src/libslic3r/PrintConfig.cpp:1572
 msgid "Post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1605 src/slic3r/GUI/Tab.cpp:1606
-#: src/slic3r/GUI/Tab.cpp:1927 src/slic3r/GUI/Tab.cpp:1928
-#: src/slic3r/GUI/Tab.cpp:2266 src/slic3r/GUI/Tab.cpp:2267
-#: src/slic3r/GUI/Tab.cpp:2342 src/slic3r/GUI/Tab.cpp:2343
-#: src/slic3r/GUI/Tab.cpp:3985 src/slic3r/GUI/Tab.cpp:3986
+#: src/slic3r/GUI/Tab.cpp:1591 src/slic3r/GUI/Tab.cpp:1592
+#: src/slic3r/GUI/Tab.cpp:1900 src/slic3r/GUI/Tab.cpp:1901
+#: src/slic3r/GUI/Tab.cpp:2234 src/slic3r/GUI/Tab.cpp:2235
+#: src/slic3r/GUI/Tab.cpp:2310 src/slic3r/GUI/Tab.cpp:2311
+#: src/slic3r/GUI/Tab.cpp:3948 src/slic3r/GUI/Tab.cpp:3949
 msgid "Notes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1612 src/slic3r/GUI/Tab.cpp:1935
-#: src/slic3r/GUI/Tab.cpp:2273 src/slic3r/GUI/Tab.cpp:2349
-#: src/slic3r/GUI/Tab.cpp:3993 src/slic3r/GUI/Tab.cpp:4124
+#: src/slic3r/GUI/Tab.cpp:1598 src/slic3r/GUI/Tab.cpp:1908
+#: src/slic3r/GUI/Tab.cpp:2241 src/slic3r/GUI/Tab.cpp:2317
+#: src/slic3r/GUI/Tab.cpp:3956 src/slic3r/GUI/Tab.cpp:4087
 msgid "Dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1613 src/slic3r/GUI/Tab.cpp:1936
-#: src/slic3r/GUI/Tab.cpp:2274 src/slic3r/GUI/Tab.cpp:2350
-#: src/slic3r/GUI/Tab.cpp:3994 src/slic3r/GUI/Tab.cpp:4125
+#: src/slic3r/GUI/Tab.cpp:1599 src/slic3r/GUI/Tab.cpp:1909
+#: src/slic3r/GUI/Tab.cpp:2242 src/slic3r/GUI/Tab.cpp:2318
+#: src/slic3r/GUI/Tab.cpp:3957 src/slic3r/GUI/Tab.cpp:4088
 msgid "Profile dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1693
+#: src/slic3r/GUI/Tab.cpp:1679
 msgid "Filament Overrides"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1815
+#: src/slic3r/GUI/Tab.cpp:1789
 msgid "Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1816
+#: src/slic3r/GUI/Tab.cpp:1790
 msgid "Nozzle"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1821
+#: src/slic3r/GUI/Tab.cpp:1795
 msgid "Bed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1826
+#: src/slic3r/GUI/Tab.cpp:1800
 msgid "Cooling"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1828 src/libslic3r/PrintConfig.cpp:1565
-#: src/libslic3r/PrintConfig.cpp:2428
+#: src/slic3r/GUI/Tab.cpp:1802 src/libslic3r/PrintConfig.cpp:1474
+#: src/libslic3r/PrintConfig.cpp:2334
 msgid "Enable"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1839
+#: src/slic3r/GUI/Tab.cpp:1813
 msgid "Fan settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1850
+#: src/slic3r/GUI/Tab.cpp:1823
 msgid "Cooling thresholds"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1856
+#: src/slic3r/GUI/Tab.cpp:1829
 msgid "Filament properties"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1863
+#: src/slic3r/GUI/Tab.cpp:1836
 msgid "Print speed override"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1873
+#: src/slic3r/GUI/Tab.cpp:1846
 msgid "Wipe tower parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1876
+#: src/slic3r/GUI/Tab.cpp:1849
 msgid "Toolchange parameters with single extruder MM printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1889
+#: src/slic3r/GUI/Tab.cpp:1862
 msgid "Ramming settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1912 src/slic3r/GUI/Tab.cpp:2205
-#: src/libslic3r/PrintConfig.cpp:2063
+#: src/slic3r/GUI/Tab.cpp:1885 src/slic3r/GUI/Tab.cpp:2173
+#: src/libslic3r/PrintConfig.cpp:1969
 msgid "Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1913 src/slic3r/GUI/Tab.cpp:2206
-#: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2028
+#: src/slic3r/GUI/Tab.cpp:1886 src/slic3r/GUI/Tab.cpp:2174
+#: src/libslic3r/PrintConfig.cpp:1919 src/libslic3r/PrintConfig.cpp:1934
 msgid "Start G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1920 src/slic3r/GUI/Tab.cpp:2213
-#: src/libslic3r/PrintConfig.cpp:441 src/libslic3r/PrintConfig.cpp:451
+#: src/slic3r/GUI/Tab.cpp:1893 src/slic3r/GUI/Tab.cpp:2181
+#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:436
 msgid "End G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1970
+#: src/slic3r/GUI/Tab.cpp:1943
 msgid "Volumetric flow hints not available"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2066
+#: src/slic3r/GUI/Tab.cpp:2039
 msgid ""
 "Note: All parameters from this group are moved to the Physical Printer "
 "settings (see changelog).\n"
@@ -6898,19 +6622,19 @@ msgid ""
 "physical_printer directory."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:2286
+#: src/slic3r/GUI/Tab.cpp:2072 src/slic3r/GUI/Tab.cpp:2254
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2108 src/slic3r/GUI/UnsavedChangesDialog.cpp:1080
+#: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
 msgid "Capabilities"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2113
+#: src/slic3r/GUI/Tab.cpp:2086
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2141
+#: src/slic3r/GUI/Tab.cpp:2114
 msgid ""
 "Single Extruder Multi Material is selected, \n"
 "and all extruders must have the same diameter.\n"
@@ -6918,231 +6642,231 @@ msgid ""
 "nozzle diameter value?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2144 src/slic3r/GUI/Tab.cpp:2552
-#: src/libslic3r/PrintConfig.cpp:1534
+#: src/slic3r/GUI/Tab.cpp:2117 src/slic3r/GUI/Tab.cpp:2520
+#: src/libslic3r/PrintConfig.cpp:1443
 msgid "Nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2220 src/libslic3r/PrintConfig.cpp:209
+#: src/slic3r/GUI/Tab.cpp:2188 src/libslic3r/PrintConfig.cpp:194
 msgid "Before layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2227 src/libslic3r/PrintConfig.cpp:1273
+#: src/slic3r/GUI/Tab.cpp:2195 src/libslic3r/PrintConfig.cpp:1182
 msgid "After layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2234 src/libslic3r/PrintConfig.cpp:2321
+#: src/slic3r/GUI/Tab.cpp:2202 src/libslic3r/PrintConfig.cpp:2227
 msgid "Tool change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2241
+#: src/slic3r/GUI/Tab.cpp:2209
 msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2248
+#: src/slic3r/GUI/Tab.cpp:2216
 msgid "Color Change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2254 src/libslic3r/PrintConfig.cpp:2054
+#: src/slic3r/GUI/Tab.cpp:2222 src/libslic3r/PrintConfig.cpp:1960
 msgid "Pause Print G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2260
+#: src/slic3r/GUI/Tab.cpp:2228
 msgid "Template Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2293
+#: src/slic3r/GUI/Tab.cpp:2261
 msgid "Display"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2308
+#: src/slic3r/GUI/Tab.cpp:2276
 msgid "Tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2309
+#: src/slic3r/GUI/Tab.cpp:2277
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2315 src/slic3r/GUI/Tab.cpp:3969
+#: src/slic3r/GUI/Tab.cpp:2283 src/slic3r/GUI/Tab.cpp:3932
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2332 src/slic3r/GUI/Tab.cpp:3965
+#: src/slic3r/GUI/Tab.cpp:2300 src/slic3r/GUI/Tab.cpp:3928
 msgid "Exposure"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2391 src/slic3r/GUI/Tab.cpp:2485
-#: src/libslic3r/PrintConfig.cpp:1302 src/libslic3r/PrintConfig.cpp:1337
-#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1371
-#: src/libslic3r/PrintConfig.cpp:1387 src/libslic3r/PrintConfig.cpp:1397
-#: src/libslic3r/PrintConfig.cpp:1407 src/libslic3r/PrintConfig.cpp:1417
+#: src/slic3r/GUI/Tab.cpp:2359 src/slic3r/GUI/Tab.cpp:2453
+#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1246
+#: src/libslic3r/PrintConfig.cpp:1263 src/libslic3r/PrintConfig.cpp:1280
+#: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:1306
+#: src/libslic3r/PrintConfig.cpp:1316 src/libslic3r/PrintConfig.cpp:1326
 msgid "Machine limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2414
+#: src/slic3r/GUI/Tab.cpp:2382
 msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2420
+#: src/slic3r/GUI/Tab.cpp:2388
 msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2429
+#: src/slic3r/GUI/Tab.cpp:2397
 msgid "Maximum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2434
+#: src/slic3r/GUI/Tab.cpp:2402
 msgid "Maximum accelerations"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2441
+#: src/slic3r/GUI/Tab.cpp:2409
 msgid "Jerk limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2446
+#: src/slic3r/GUI/Tab.cpp:2414
 msgid "Minimum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2510 src/slic3r/GUI/Tab.cpp:2518
+#: src/slic3r/GUI/Tab.cpp:2478 src/slic3r/GUI/Tab.cpp:2486
 msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2519
+#: src/slic3r/GUI/Tab.cpp:2487
 msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2550
+#: src/slic3r/GUI/Tab.cpp:2518
 msgid ""
 "This is a single extruder multimaterial printer, diameters of all extruders "
 "will be set to the new value. Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2574
+#: src/slic3r/GUI/Tab.cpp:2542
 msgid "Layer height limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2579
+#: src/slic3r/GUI/Tab.cpp:2547
 msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2585
+#: src/slic3r/GUI/Tab.cpp:2553
 msgid "Only lift Z"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2598
+#: src/slic3r/GUI/Tab.cpp:2566
 msgid ""
 "Retraction when tool is disabled (advanced settings for multi-extruder "
 "setups)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2605
+#: src/slic3r/GUI/Tab.cpp:2573
 msgid "Reset to Filament Color"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2783
+#: src/slic3r/GUI/Tab.cpp:2751
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2785
+#: src/slic3r/GUI/Tab.cpp:2753
 msgid "Firmware Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3376
+#: src/slic3r/GUI/Tab.cpp:3339
 msgid "Detached"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3439
+#: src/slic3r/GUI/Tab.cpp:3402
 msgid "remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3439
+#: src/slic3r/GUI/Tab.cpp:3402
 msgid "delete"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3448
+#: src/slic3r/GUI/Tab.cpp:3411
 msgid "It's a last preset for this physical printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3453
+#: src/slic3r/GUI/Tab.cpp:3416
 msgid ""
 "Are you sure you want to delete \"%1%\" preset from the physical printer "
 "\"%2%\"?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3465
+#: src/slic3r/GUI/Tab.cpp:3428
 msgid ""
 "The physical printer(s) below is based on the preset, you are going to "
 "delete."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3469
+#: src/slic3r/GUI/Tab.cpp:3432
 msgid ""
 "Note, that selected preset will be deleted from this/those printer(s) too."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3473
+#: src/slic3r/GUI/Tab.cpp:3436
 msgid ""
 "The physical printer(s) below is based only on the preset, you are going to "
 "delete."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3477
+#: src/slic3r/GUI/Tab.cpp:3440
 msgid ""
 "Note, that this/those printer(s) will be deleted after deleting of the "
 "selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3481
+#: src/slic3r/GUI/Tab.cpp:3444
 msgid "Are you sure you want to %1% the selected preset?"
 msgstr ""
 
 #. TRN  Remove/Delete
-#: src/slic3r/GUI/Tab.cpp:3486
+#: src/slic3r/GUI/Tab.cpp:3449
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3567 src/slic3r/GUI/Tab.cpp:3639
+#: src/slic3r/GUI/Tab.cpp:3530 src/slic3r/GUI/Tab.cpp:3602
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3703
+#: src/slic3r/GUI/Tab.cpp:3666
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3706
+#: src/slic3r/GUI/Tab.cpp:3669
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3710
+#: src/slic3r/GUI/Tab.cpp:3673
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3732
+#: src/slic3r/GUI/Tab.cpp:3695
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3734
+#: src/slic3r/GUI/Tab.cpp:3697
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3736
+#: src/slic3r/GUI/Tab.cpp:3699
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3738
+#: src/slic3r/GUI/Tab.cpp:3701
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -7150,23 +6874,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3743
+#: src/slic3r/GUI/Tab.cpp:3706
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:3745
+#: src/slic3r/GUI/Tab.cpp:3708
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3748
+#: src/slic3r/GUI/Tab.cpp:3711
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:3750
+#: src/slic3r/GUI/Tab.cpp:3713
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -7174,13 +6898,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3760
+#: src/slic3r/GUI/Tab.cpp:3723
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3762
+#: src/slic3r/GUI/Tab.cpp:3725
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -7188,17 +6912,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3765
+#: src/slic3r/GUI/Tab.cpp:3728
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3768
+#: src/slic3r/GUI/Tab.cpp:3731
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3770
+#: src/slic3r/GUI/Tab.cpp:3733
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -7206,196 +6930,196 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3776
+#: src/slic3r/GUI/Tab.cpp:3739
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3777
+#: src/slic3r/GUI/Tab.cpp:3740
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3783
+#: src/slic3r/GUI/Tab.cpp:3746
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3784
+#: src/slic3r/GUI/Tab.cpp:3747
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3928 src/slic3r/GUI/Tab.cpp:3930
+#: src/slic3r/GUI/Tab.cpp:3891 src/slic3r/GUI/Tab.cpp:3893
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4052
+#: src/slic3r/GUI/Tab.cpp:4015
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4057
+#: src/slic3r/GUI/Tab.cpp:4020
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4080
+#: src/slic3r/GUI/Tab.cpp:4043
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4085
+#: src/slic3r/GUI/Tab.cpp:4048
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4159
+#: src/slic3r/GUI/Tab.cpp:4122
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4161 src/libslic3r/PrintConfig.cpp:3002
+#: src/slic3r/GUI/Tab.cpp:4124 src/libslic3r/PrintConfig.cpp:2908
 msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4161 src/libslic3r/PrintConfig.cpp:3104
+#: src/slic3r/GUI/Tab.cpp:4124 src/libslic3r/PrintConfig.cpp:3010
 msgid "Pad around object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:370 src/slic3r/GUI/Tab.hpp:492
+#: src/slic3r/GUI/Tab.hpp:373 src/slic3r/GUI/Tab.hpp:495
 msgid "Print Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:401
+#: src/slic3r/GUI/Tab.hpp:404
 msgid "Filament Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:442
+#: src/slic3r/GUI/Tab.hpp:445
 msgid "Printer Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:476
+#: src/slic3r/GUI/Tab.hpp:479
 msgid "Material Settings"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:149
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:158
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:857
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:137
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:146
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:537
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
 msgid "PrusaSlicer is closing: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:554
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:620
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:621
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:652
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:653
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:654
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:674
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:676
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
 msgid ""
 "You will not be asked about the unsaved changes the next time you close "
 "PrusaSlicer."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:677
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
 msgid ""
 "You will not be asked about the unsaved changes the next time you switch a "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:678
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:680
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:747
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:749
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:752
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:752
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:756
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
 msgid "Save the selected options to preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:757
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:745
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1019
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004
 msgid "The following presets were modified:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1024
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1009
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1028
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1013
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1029
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1014
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1075
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1061
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1197
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1177
 msgid "Old value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1198
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1178
 msgid "New value"
 msgstr ""
 
@@ -7633,12 +7357,12 @@ msgstr ""
 msgid "Show advanced settings"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:627
+#: src/slic3r/GUI/wxExtensions.cpp:623
 #, possible-c-format
 msgid "Switch to the %s mode"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:628
+#: src/slic3r/GUI/wxExtensions.cpp:624
 #, possible-c-format
 msgid "Current mode is %s"
 msgstr ""
@@ -7842,30 +7566,24 @@ msgstr ""
 msgid "Open G-code file:"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:518
+#: src/libslic3r/GCode.cpp:602
 msgid "There is an object with no extrusions on the first layer."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:536
+#: src/libslic3r/GCode.cpp:620
 msgid "Empty layers detected, the output would not be printable."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:537
+#: src/libslic3r/GCode.cpp:621
 msgid "Print z"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:538
+#: src/libslic3r/GCode.cpp:622
 msgid ""
 "This is usually caused by negligibly small extrusions or by a faulty model. "
 "Try to repair the model or change its orientation on the bed."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:1261
-msgid ""
-"Your print is very close to the priming regions. Make sure there is no "
-"collision."
-msgstr ""
-
 #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360
 msgid "Mixed"
 msgstr ""
@@ -7875,13 +7593,13 @@ msgid ""
 "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1668
+#: src/libslic3r/Format/3mf.cpp:1667
 msgid ""
 "The selected 3mf file has been saved with a newer version of %1% and is not "
 "compatible."
 msgstr ""
 
-#: src/libslic3r/Format/AMF.cpp:958
+#: src/libslic3r/Format/AMF.cpp:955
 msgid ""
 "The selected amf file has been saved with a newer version of %1% and is not "
 "compatible."
@@ -8011,117 +7729,114 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1299
+#: src/libslic3r/Preset.cpp:1258
 msgid "filament"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1251
+#: src/libslic3r/Print.cpp:1246
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1254
+#: src/libslic3r/Print.cpp:1249
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1258
+#: src/libslic3r/Print.cpp:1253
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1260
+#: src/libslic3r/Print.cpp:1255
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1269
-msgid ""
-"Only a single object may be printed at a time in Spiral Vase mode. Either "
-"remove all but the last object, or enable sequential mode by "
-"\"complete_objects\"."
+#: src/libslic3r/Print.cpp:1264
+msgid "The Spiral Vase option can only be used when printing a single object."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1277
+#: src/libslic3r/Print.cpp:1271
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1290
+#: src/libslic3r/Print.cpp:1284
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1296
+#: src/libslic3r/Print.cpp:1290
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1298
+#: src/libslic3r/Print.cpp:1292
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1300
+#: src/libslic3r/Print.cpp:1294
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1302
+#: src/libslic3r/Print.cpp:1296
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1304
+#: src/libslic3r/Print.cpp:1298
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1325
+#: src/libslic3r/Print.cpp:1319
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1327
+#: src/libslic3r/Print.cpp:1321
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1329
+#: src/libslic3r/Print.cpp:1323
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1331
+#: src/libslic3r/Print.cpp:1325
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1373
+#: src/libslic3r/Print.cpp:1367
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1399
+#: src/libslic3r/Print.cpp:1393
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1408
+#: src/libslic3r/Print.cpp:1402
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1411
+#: src/libslic3r/Print.cpp:1405
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1422
+#: src/libslic3r/Print.cpp:1416
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -8129,13 +7844,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1430
+#: src/libslic3r/Print.cpp:1424
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1434
+#: src/libslic3r/Print.cpp:1428
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -8143,31 +7858,31 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1456
+#: src/libslic3r/Print.cpp:1450
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1461
+#: src/libslic3r/Print.cpp:1455
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1620
+#: src/libslic3r/Print.cpp:1614
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1646
+#: src/libslic3r/Print.cpp:1640
 msgid "Generating skirt"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1655
+#: src/libslic3r/Print.cpp:1649
 msgid "Generating brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1678
+#: src/libslic3r/Print.cpp:1672
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1682
+#: src/libslic3r/Print.cpp:1676
 msgid "Generating G-code"
 msgstr ""
 
@@ -8175,34 +7890,34 @@ msgstr ""
 msgid "Pad brim size is too small for the current configuration."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:630
+#: src/libslic3r/SLAPrint.cpp:628
 msgid ""
 "Cannot proceed without support points! Add support points or disable support "
 "generation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:642
+#: src/libslic3r/SLAPrint.cpp:640
 msgid ""
 "Elevation is too low for object. Use the \"Pad around object\" feature to "
 "print the object without elevation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:648
+#: src/libslic3r/SLAPrint.cpp:646
 msgid ""
 "The endings of the support pillars will be deployed on the gap between the "
 "object and the pad. 'Support base safety distance' has to be greater than "
 "the 'Pad object gap' parameter to avoid this."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:663
+#: src/libslic3r/SLAPrint.cpp:661
 msgid "Exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:670
+#: src/libslic3r/SLAPrint.cpp:668
 msgid "Initial exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:786
+#: src/libslic3r/SLAPrint.cpp:784
 msgid "Slicing done"
 msgstr ""
 
@@ -8293,163 +8008,130 @@ msgid "Bed custom model"
 msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:66
-msgid "G-code thumbnails"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:67
-msgid ""
-"Picture sizes to be stored into a .gcode and .sl1 files, in the following "
-"format: \"XxY, XxY, ...\""
+msgid "Picture sizes to be stored into a .gcode and .sl1 files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:75
+#: src/libslic3r/PrintConfig.cpp:73
 msgid ""
 "This setting controls the height (and thus the total number) of the slices/"
 "layers. Thinner layers give better accuracy but take more time to print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:82
+#: src/libslic3r/PrintConfig.cpp:80
 msgid "Max print height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:83
+#: src/libslic3r/PrintConfig.cpp:81
 msgid ""
 "Set this to the maximum height that can be reached by your extruder while "
 "printing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:91
+#: src/libslic3r/PrintConfig.cpp:89
 msgid "Slice gap closing radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:93
+#: src/libslic3r/PrintConfig.cpp:91
 msgid ""
 "Cracks smaller than 2x gap closing radius are being filled during the "
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:101
+#: src/libslic3r/PrintConfig.cpp:99
 msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:102
+#: src/libslic3r/PrintConfig.cpp:100
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
-"the hostname, IP address or URL of the printer host instance. Print host "
-"behind HAProxy with basic auth enabled can be accessed by putting the user "
-"name and password into the URL in the following format: https://username:"
-"password@your-octopi-address/"
+"the hostname, IP address or URL of the printer host instance."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:110
+#: src/libslic3r/PrintConfig.cpp:106
 msgid "API Key / Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:111
+#: src/libslic3r/PrintConfig.cpp:107
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the API Key or the password required for authentication."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:118
+#: src/libslic3r/PrintConfig.cpp:114
 msgid "Name of the printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:125
+#: src/libslic3r/PrintConfig.cpp:121
 msgid ""
 "Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
 "in crt/pem format. If left blank, the default OS CA certificate repository "
 "is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:131
+#: src/libslic3r/PrintConfig.cpp:127
 msgid "Elephant foot compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:133
+#: src/libslic3r/PrintConfig.cpp:129
 msgid ""
 "The first layer will be shrunk in the XY plane by the configured value to "
 "compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:149
+#: src/libslic3r/PrintConfig.cpp:145
 msgid "Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:155
+#: src/libslic3r/PrintConfig.cpp:151
 msgid "Printer preset name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:156
+#: src/libslic3r/PrintConfig.cpp:152
 msgid "Related printer preset name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:161
+#: src/libslic3r/PrintConfig.cpp:157
 msgid "Authorization Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:166
-msgid "API key"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:167
-msgid "HTTP digest"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:180
+#: src/libslic3r/PrintConfig.cpp:176
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:181
+#: src/libslic3r/PrintConfig.cpp:177
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:188
-msgid "Avoid crossing perimeters - Max detour length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:190
-msgid ""
-"The maximum detour length for avoid crossing perimeters. If the detour is "
-"longer than this value, avoid crossing perimeters is not applied for this "
-"travel path. Detour length could be specified either as an absolute value or "
-"as percentage (for example 50%) of a direct travel path."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:193
-msgid "mm or % (zero to disable)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:199 src/libslic3r/PrintConfig.cpp:2291
+#: src/libslic3r/PrintConfig.cpp:184 src/libslic3r/PrintConfig.cpp:2197
 msgid "Other layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:200
+#: src/libslic3r/PrintConfig.cpp:185
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:203
+#: src/libslic3r/PrintConfig.cpp:188
 msgid "Bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:210
+#: src/libslic3r/PrintConfig.cpp:195
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:220
+#: src/libslic3r/PrintConfig.cpp:205
 msgid "Between objects G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:221
+#: src/libslic3r/PrintConfig.cpp:206
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
@@ -8459,81 +8141,81 @@ msgid ""
 "S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:232
+#: src/libslic3r/PrintConfig.cpp:217
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:233
+#: src/libslic3r/PrintConfig.cpp:218
 msgid "Bottom solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:241
+#: src/libslic3r/PrintConfig.cpp:226
 msgid ""
 "The number of bottom solid layers is increased above bottom_solid_layers if "
 "necessary to satisfy minimum thickness of bottom shell."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:243
+#: src/libslic3r/PrintConfig.cpp:228
 msgid "Minimum bottom shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:249
+#: src/libslic3r/PrintConfig.cpp:234
 msgid "Bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:250
+#: src/libslic3r/PrintConfig.cpp:235
 msgid ""
 "This is the acceleration your printer will use for bridges. Set zero to "
 "disable acceleration control for bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:252 src/libslic3r/PrintConfig.cpp:395
-#: src/libslic3r/PrintConfig.cpp:940 src/libslic3r/PrintConfig.cpp:1079
-#: src/libslic3r/PrintConfig.cpp:1360 src/libslic3r/PrintConfig.cpp:1409
-#: src/libslic3r/PrintConfig.cpp:1419 src/libslic3r/PrintConfig.cpp:1612
+#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:380
+#: src/libslic3r/PrintConfig.cpp:909 src/libslic3r/PrintConfig.cpp:1037
+#: src/libslic3r/PrintConfig.cpp:1269 src/libslic3r/PrintConfig.cpp:1318
+#: src/libslic3r/PrintConfig.cpp:1328 src/libslic3r/PrintConfig.cpp:1522
 msgid "mm/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:258
+#: src/libslic3r/PrintConfig.cpp:243
 msgid "Bridging angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:260
+#: src/libslic3r/PrintConfig.cpp:245
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:852
-#: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1863
-#: src/libslic3r/PrintConfig.cpp:2121 src/libslic3r/PrintConfig.cpp:2276
-#: src/libslic3r/PrintConfig.cpp:2475 src/libslic3r/PrintConfig.cpp:2976
-#: src/libslic3r/PrintConfig.cpp:3097
+#: src/libslic3r/PrintConfig.cpp:248 src/libslic3r/PrintConfig.cpp:823
+#: src/libslic3r/PrintConfig.cpp:1759 src/libslic3r/PrintConfig.cpp:1769
+#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2182
+#: src/libslic3r/PrintConfig.cpp:2381 src/libslic3r/PrintConfig.cpp:2882
+#: src/libslic3r/PrintConfig.cpp:3003
 msgid "°"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:269
+#: src/libslic3r/PrintConfig.cpp:254
 msgid "Bridges fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:270
+#: src/libslic3r/PrintConfig.cpp:255
 msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:271 src/libslic3r/PrintConfig.cpp:864
-#: src/libslic3r/PrintConfig.cpp:1248 src/libslic3r/PrintConfig.cpp:1427
-#: src/libslic3r/PrintConfig.cpp:1490 src/libslic3r/PrintConfig.cpp:1745
-#: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2890
-#: src/libslic3r/PrintConfig.cpp:3016
+#: src/libslic3r/PrintConfig.cpp:256 src/libslic3r/PrintConfig.cpp:835
+#: src/libslic3r/PrintConfig.cpp:1157 src/libslic3r/PrintConfig.cpp:1336
+#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1651
+#: src/libslic3r/PrintConfig.cpp:2559 src/libslic3r/PrintConfig.cpp:2796
+#: src/libslic3r/PrintConfig.cpp:2922
 msgid "%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:278
+#: src/libslic3r/PrintConfig.cpp:263
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:280
+#: src/libslic3r/PrintConfig.cpp:265
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -8541,84 +8223,84 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:290
+#: src/libslic3r/PrintConfig.cpp:275
 msgid "Bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:292
+#: src/libslic3r/PrintConfig.cpp:277
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:293 src/libslic3r/PrintConfig.cpp:671
-#: src/libslic3r/PrintConfig.cpp:679 src/libslic3r/PrintConfig.cpp:688
-#: src/libslic3r/PrintConfig.cpp:696 src/libslic3r/PrintConfig.cpp:723
-#: src/libslic3r/PrintConfig.cpp:742 src/libslic3r/PrintConfig.cpp:1015
-#: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1267
-#: src/libslic3r/PrintConfig.cpp:1343 src/libslic3r/PrintConfig.cpp:1377
-#: src/libslic3r/PrintConfig.cpp:1389 src/libslic3r/PrintConfig.cpp:1399
-#: src/libslic3r/PrintConfig.cpp:1449 src/libslic3r/PrintConfig.cpp:1508
-#: src/libslic3r/PrintConfig.cpp:1642 src/libslic3r/PrintConfig.cpp:1820
-#: src/libslic3r/PrintConfig.cpp:1829 src/libslic3r/PrintConfig.cpp:2255
-#: src/libslic3r/PrintConfig.cpp:2382
+#: src/libslic3r/PrintConfig.cpp:278 src/libslic3r/PrintConfig.cpp:652
+#: src/libslic3r/PrintConfig.cpp:660 src/libslic3r/PrintConfig.cpp:669
+#: src/libslic3r/PrintConfig.cpp:677 src/libslic3r/PrintConfig.cpp:704
+#: src/libslic3r/PrintConfig.cpp:723 src/libslic3r/PrintConfig.cpp:973
+#: src/libslic3r/PrintConfig.cpp:1103 src/libslic3r/PrintConfig.cpp:1176
+#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1286
+#: src/libslic3r/PrintConfig.cpp:1298 src/libslic3r/PrintConfig.cpp:1308
+#: src/libslic3r/PrintConfig.cpp:1358 src/libslic3r/PrintConfig.cpp:1417
+#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1726
+#: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:2288
 msgid "mm/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:300
+#: src/libslic3r/PrintConfig.cpp:285
 msgid "Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:301
+#: src/libslic3r/PrintConfig.cpp:286
 msgid ""
 "Horizontal width of the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:308
+#: src/libslic3r/PrintConfig.cpp:293
 msgid "Clip multi-part objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:309
+#: src/libslic3r/PrintConfig.cpp:294
 msgid ""
 "When printing multi-material objects, this settings will make Slic3r to clip "
 "the overlapping object parts one by the other (2nd part will be clipped by "
 "the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:316
+#: src/libslic3r/PrintConfig.cpp:301
 msgid "Colorprint height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:317
+#: src/libslic3r/PrintConfig.cpp:302
 msgid "Heights at which a filament change is to occur."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:327
+#: src/libslic3r/PrintConfig.cpp:312
 msgid "Compatible printers condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:328
+#: src/libslic3r/PrintConfig.cpp:313
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:342
+#: src/libslic3r/PrintConfig.cpp:327
 msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:343
+#: src/libslic3r/PrintConfig.cpp:328
 msgid ""
 "A boolean expression using the configuration values of an active print "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active print profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:360
+#: src/libslic3r/PrintConfig.cpp:345
 msgid "Complete individual objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:361
+#: src/libslic3r/PrintConfig.cpp:346
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -8626,97 +8308,97 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:369
+#: src/libslic3r/PrintConfig.cpp:354
 msgid "Enable auto cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:370
+#: src/libslic3r/PrintConfig.cpp:355
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:375
+#: src/libslic3r/PrintConfig.cpp:360
 msgid "Cooling tube position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:376
+#: src/libslic3r/PrintConfig.cpp:361
 msgid "Distance of the center-point of the cooling tube from the extruder tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:383
+#: src/libslic3r/PrintConfig.cpp:368
 msgid "Cooling tube length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:384
+#: src/libslic3r/PrintConfig.cpp:369
 msgid "Length of the cooling tube to limit space for cooling moves inside it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:392
+#: src/libslic3r/PrintConfig.cpp:377
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
 "specific acceleration values are used (perimeter/infill). Set zero to "
 "prevent resetting acceleration at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:401
+#: src/libslic3r/PrintConfig.cpp:386
 msgid "Default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:402
+#: src/libslic3r/PrintConfig.cpp:387
 msgid ""
 "Default filament profile associated with the current printer profile. On "
 "selection of the current printer profile, this filament profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:408
+#: src/libslic3r/PrintConfig.cpp:393
 msgid "Default print profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:409 src/libslic3r/PrintConfig.cpp:2820
-#: src/libslic3r/PrintConfig.cpp:2831
+#: src/libslic3r/PrintConfig.cpp:394 src/libslic3r/PrintConfig.cpp:2726
+#: src/libslic3r/PrintConfig.cpp:2737
 msgid ""
 "Default print profile associated with the current printer profile. On "
 "selection of the current printer profile, this print profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:415
+#: src/libslic3r/PrintConfig.cpp:400
 msgid "Disable fan for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:416
+#: src/libslic3r/PrintConfig.cpp:401
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:425
+#: src/libslic3r/PrintConfig.cpp:410
 msgid "Don't support bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:427
+#: src/libslic3r/PrintConfig.cpp:412
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:433
+#: src/libslic3r/PrintConfig.cpp:418
 msgid "Distance between copies"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:434
+#: src/libslic3r/PrintConfig.cpp:419
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:442
+#: src/libslic3r/PrintConfig.cpp:427
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all PrusaSlicer settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:452
+#: src/libslic3r/PrintConfig.cpp:437
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode (and before any toolchange from this filament in case of "
@@ -8725,70 +8407,66 @@ msgid ""
 "in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:463
+#: src/libslic3r/PrintConfig.cpp:448
 msgid "Ensure vertical shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:465
+#: src/libslic3r/PrintConfig.cpp:450
 msgid ""
 "Add solid infill near sloping surfaces to guarantee the vertical shell "
 "thickness (top+bottom solid layers)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:471
+#: src/libslic3r/PrintConfig.cpp:456
 msgid "Top fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:473
+#: src/libslic3r/PrintConfig.cpp:458
 msgid ""
 "Fill pattern for top infill. This only affects the top visible layer, and "
 "not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:918
-#: src/libslic3r/PrintConfig.cpp:2236
+#: src/libslic3r/PrintConfig.cpp:467 src/libslic3r/PrintConfig.cpp:888
+#: src/libslic3r/PrintConfig.cpp:2142
 msgid "Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:484
+#: src/libslic3r/PrintConfig.cpp:468
 msgid "Monotonic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:919
-msgid "Aligned Rectilinear"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:925
+#: src/libslic3r/PrintConfig.cpp:469 src/libslic3r/PrintConfig.cpp:894
 msgid "Concentric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:929
+#: src/libslic3r/PrintConfig.cpp:470 src/libslic3r/PrintConfig.cpp:898
 msgid "Hilbert Curve"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:930
+#: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:899
 msgid "Archimedean Chords"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:489 src/libslic3r/PrintConfig.cpp:931
+#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:900
 msgid "Octagram Spiral"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:495
+#: src/libslic3r/PrintConfig.cpp:478
 msgid "Bottom fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:497
+#: src/libslic3r/PrintConfig.cpp:480
 msgid ""
 "Fill pattern for bottom infill. This only affects the bottom external "
 "visible layer, and not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:517
+#: src/libslic3r/PrintConfig.cpp:489 src/libslic3r/PrintConfig.cpp:500
 msgid "External perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:508
+#: src/libslic3r/PrintConfig.cpp:491
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -8796,43 +8474,43 @@ msgid ""
 "(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:511 src/libslic3r/PrintConfig.cpp:621
-#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:975
-#: src/libslic3r/PrintConfig.cpp:1104 src/libslic3r/PrintConfig.cpp:1159
-#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1632
-#: src/libslic3r/PrintConfig.cpp:1961 src/libslic3r/PrintConfig.cpp:2110
-#: src/libslic3r/PrintConfig.cpp:2178 src/libslic3r/PrintConfig.cpp:2339
+#: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:603
+#: src/libslic3r/PrintConfig.cpp:931 src/libslic3r/PrintConfig.cpp:944
+#: src/libslic3r/PrintConfig.cpp:1068 src/libslic3r/PrintConfig.cpp:1094
+#: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1867
+#: src/libslic3r/PrintConfig.cpp:2016 src/libslic3r/PrintConfig.cpp:2084
+#: src/libslic3r/PrintConfig.cpp:2245
 msgid "mm or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:519
+#: src/libslic3r/PrintConfig.cpp:502
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
+msgstr "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:522 src/libslic3r/PrintConfig.cpp:984
-#: src/libslic3r/PrintConfig.cpp:1920 src/libslic3r/PrintConfig.cpp:1972
-#: src/libslic3r/PrintConfig.cpp:2222 src/libslic3r/PrintConfig.cpp:2352
+#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:953
+#: src/libslic3r/PrintConfig.cpp:1826 src/libslic3r/PrintConfig.cpp:1878
+#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2258
 msgid "mm/s or %"
-msgstr ""
+msgstr "מ\"מ\\ש או %"
 
-#: src/libslic3r/PrintConfig.cpp:529
+#: src/libslic3r/PrintConfig.cpp:512
 msgid "External perimeters first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:531
+#: src/libslic3r/PrintConfig.cpp:514
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:537
+#: src/libslic3r/PrintConfig.cpp:520
 msgid "Extra perimeters if needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:539
+#: src/libslic3r/PrintConfig.cpp:522
 #, possible-c-format
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
@@ -8840,14 +8518,14 @@ msgid ""
 "is supported."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:549
+#: src/libslic3r/PrintConfig.cpp:532
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:561
+#: src/libslic3r/PrintConfig.cpp:544
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -8855,26 +8533,26 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:572
+#: src/libslic3r/PrintConfig.cpp:555
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:582
+#: src/libslic3r/PrintConfig.cpp:565
 msgid "Extruder Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:583 src/libslic3r/PrintConfig.cpp:645
+#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:626
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:589
+#: src/libslic3r/PrintConfig.cpp:572
 msgid "Extruder offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:590
+#: src/libslic3r/PrintConfig.cpp:573
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -8882,21 +8560,21 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:599
+#: src/libslic3r/PrintConfig.cpp:582
 msgid "Extrusion axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:600
+#: src/libslic3r/PrintConfig.cpp:583
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:605
+#: src/libslic3r/PrintConfig.cpp:588
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:606
+#: src/libslic3r/PrintConfig.cpp:589
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -8904,11 +8582,11 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:615
+#: src/libslic3r/PrintConfig.cpp:597
 msgid "Default extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:617
+#: src/libslic3r/PrintConfig.cpp:599
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -8917,123 +8595,119 @@ msgid ""
 "height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:628
+#: src/libslic3r/PrintConfig.cpp:609
 msgid "Keep fan always on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:629
+#: src/libslic3r/PrintConfig.cpp:610
 msgid ""
 "If this is enabled, fan will never be disabled and will be kept running at "
 "least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:634
+#: src/libslic3r/PrintConfig.cpp:615
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:635
+#: src/libslic3r/PrintConfig.cpp:616
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the minimum and "
 "maximum speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:637 src/libslic3r/PrintConfig.cpp:1908
+#: src/libslic3r/PrintConfig.cpp:618 src/libslic3r/PrintConfig.cpp:1814
 msgid "approximate seconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:644
-msgid "Color"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:650
+#: src/libslic3r/PrintConfig.cpp:631
 msgid "Filament notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:651
+#: src/libslic3r/PrintConfig.cpp:632
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:659 src/libslic3r/PrintConfig.cpp:1455
+#: src/libslic3r/PrintConfig.cpp:640 src/libslic3r/PrintConfig.cpp:1364
 msgid "Max volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:660
+#: src/libslic3r/PrintConfig.cpp:641
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:669
+#: src/libslic3r/PrintConfig.cpp:650
 msgid "Loading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:670
+#: src/libslic3r/PrintConfig.cpp:651
 msgid "Speed used for loading the filament on the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:677
+#: src/libslic3r/PrintConfig.cpp:658
 msgid "Loading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:678
+#: src/libslic3r/PrintConfig.cpp:659
 msgid "Speed used at the very beginning of loading phase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:685
+#: src/libslic3r/PrintConfig.cpp:666
 msgid "Unloading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:686
+#: src/libslic3r/PrintConfig.cpp:667
 msgid ""
 "Speed used for unloading the filament on the wipe tower (does not affect  "
 "initial part of unloading just after ramming)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:694
+#: src/libslic3r/PrintConfig.cpp:675
 msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:695
+#: src/libslic3r/PrintConfig.cpp:676
 msgid ""
 "Speed used for unloading the tip of the filament immediately after ramming."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:702
+#: src/libslic3r/PrintConfig.cpp:683
 msgid "Delay after unloading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:703
+#: src/libslic3r/PrintConfig.cpp:684
 msgid ""
 "Time to wait after the filament is unloaded. May help to get reliable "
 "toolchanges with flexible materials that may need more time to shrink to "
 "original dimensions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:712
+#: src/libslic3r/PrintConfig.cpp:693
 msgid "Number of cooling moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:713
+#: src/libslic3r/PrintConfig.cpp:694
 msgid ""
 "Filament is cooled by being moved back and forth in the cooling tubes. "
 "Specify desired number of these moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:721
+#: src/libslic3r/PrintConfig.cpp:702
 msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:722
+#: src/libslic3r/PrintConfig.cpp:703
 msgid "Cooling moves are gradually accelerating beginning at this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:729
+#: src/libslic3r/PrintConfig.cpp:710
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:730
+#: src/libslic3r/PrintConfig.cpp:711
 msgid ""
 "After a tool change, the exact position of the newly loaded filament inside "
 "the nozzle may not be known, and the filament pressure is likely not yet "
@@ -9042,63 +8716,63 @@ msgid ""
 "to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:715
 msgid "mm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:740
+#: src/libslic3r/PrintConfig.cpp:721
 msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:741
+#: src/libslic3r/PrintConfig.cpp:722
 msgid "Cooling moves are gradually accelerating towards this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:748
+#: src/libslic3r/PrintConfig.cpp:729
 msgid "Filament load time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:749
+#: src/libslic3r/PrintConfig.cpp:730
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:756
+#: src/libslic3r/PrintConfig.cpp:737
 msgid "Ramming parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:757
+#: src/libslic3r/PrintConfig.cpp:738
 msgid ""
 "This string is edited by RammingDialog and contains ramming specific "
 "parameters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:763
+#: src/libslic3r/PrintConfig.cpp:744
 msgid "Filament unload time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:764
+#: src/libslic3r/PrintConfig.cpp:745
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:772
+#: src/libslic3r/PrintConfig.cpp:753
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:2731
-#: src/libslic3r/PrintConfig.cpp:2732
+#: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:2637
+#: src/libslic3r/PrintConfig.cpp:2638
 msgid "Density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:780
+#: src/libslic3r/PrintConfig.cpp:761
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -9106,145 +8780,129 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:783
+#: src/libslic3r/PrintConfig.cpp:764
 msgid "g/cm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:788
+#: src/libslic3r/PrintConfig.cpp:769
 msgid "Filament type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:789
+#: src/libslic3r/PrintConfig.cpp:770
 msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:816
+#: src/libslic3r/PrintConfig.cpp:797
 msgid "Soluble material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:817
+#: src/libslic3r/PrintConfig.cpp:798
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:823
+#: src/libslic3r/PrintConfig.cpp:804
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:824
+#: src/libslic3r/PrintConfig.cpp:805
 msgid "money/kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:829
-msgid "Spool weight"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:830
-msgid ""
-"Enter weight of the empty filament spool. One may weigh a partially consumed "
-"filament spool before printing and one may compare the measured weight with "
-"the calculated weight of the filament with the spool to find out whether the "
-"amount of filament on the spool is sufficient to finish the print."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:834
-msgid "g"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:2815
+#: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:2721
 msgid "(Unknown)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:847
+#: src/libslic3r/PrintConfig.cpp:818
 msgid "Fill angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:849
+#: src/libslic3r/PrintConfig.cpp:820
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:861
+#: src/libslic3r/PrintConfig.cpp:832
 msgid "Fill density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:863
+#: src/libslic3r/PrintConfig.cpp:834
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:898
+#: src/libslic3r/PrintConfig.cpp:869
 msgid "Fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:900
+#: src/libslic3r/PrintConfig.cpp:871
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:920
+#: src/libslic3r/PrintConfig.cpp:889
 msgid "Grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:921
+#: src/libslic3r/PrintConfig.cpp:890
 msgid "Triangles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:922
+#: src/libslic3r/PrintConfig.cpp:891
 msgid "Stars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:923
+#: src/libslic3r/PrintConfig.cpp:892
 msgid "Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:924
+#: src/libslic3r/PrintConfig.cpp:893
 msgid "Line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:2238
+#: src/libslic3r/PrintConfig.cpp:895 src/libslic3r/PrintConfig.cpp:2144
 msgid "Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:927
+#: src/libslic3r/PrintConfig.cpp:896
 msgid "3D Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:928
+#: src/libslic3r/PrintConfig.cpp:897
 msgid "Gyroid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:932
+#: src/libslic3r/PrintConfig.cpp:901
 msgid "Adaptive Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:933
+#: src/libslic3r/PrintConfig.cpp:902
 msgid "Support Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:937 src/libslic3r/PrintConfig.cpp:946
-#: src/libslic3r/PrintConfig.cpp:956 src/libslic3r/PrintConfig.cpp:990
+#: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:915
+#: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:959
 msgid "First layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:938
+#: src/libslic3r/PrintConfig.cpp:907
 msgid ""
 "This is the acceleration your printer will use for first layer. Set zero to "
 "disable acceleration control for first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:947
+#: src/libslic3r/PrintConfig.cpp:916
 msgid "First layer bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:948
+#: src/libslic3r/PrintConfig.cpp:917
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:958
+#: src/libslic3r/PrintConfig.cpp:927
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -9252,7 +8910,7 @@ msgid ""
 "layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:971
+#: src/libslic3r/PrintConfig.cpp:940
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
@@ -9260,64 +8918,51 @@ msgid ""
 "example: 150%) over the default layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:980
+#: src/libslic3r/PrintConfig.cpp:949
 msgid "First layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:981
+#: src/libslic3r/PrintConfig.cpp:950
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first layer, regardless of their type. If expressed "
 "as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:991
+#: src/libslic3r/PrintConfig.cpp:960
 msgid "First layer nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:992
+#: src/libslic3r/PrintConfig.cpp:961
 msgid ""
 "Nozzle temperature for the first layer. If you want to control temperature "
 "manually during print, set this to zero to disable temperature control "
 "commands in the output G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1000
-msgid "Full fan speed at layer"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1001
-msgid ""
-"Fan speed will be ramped up linearly from zero at layer "
-"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
-"\"full_fan_speed_layer\" will be ignored if lower than "
-"\"disable_fan_first_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1013
+#: src/libslic3r/PrintConfig.cpp:971
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1021
+#: src/libslic3r/PrintConfig.cpp:979
 msgid "Verbose G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1022
+#: src/libslic3r/PrintConfig.cpp:980
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1029
+#: src/libslic3r/PrintConfig.cpp:987
 msgid "G-code flavor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1030
+#: src/libslic3r/PrintConfig.cpp:988
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -9325,15 +8970,15 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1055
+#: src/libslic3r/PrintConfig.cpp:1013
 msgid "No extrusion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1060
+#: src/libslic3r/PrintConfig.cpp:1018
 msgid "Label objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1061
+#: src/libslic3r/PrintConfig.cpp:1019
 msgid ""
 "Enable this to add comments into the G-Code labeling print moves with what "
 "object they belong to, which is useful for the Octoprint CancelObject "
@@ -9341,91 +8986,46 @@ msgid ""
 "setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1068
+#: src/libslic3r/PrintConfig.cpp:1026
 msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1069
+#: src/libslic3r/PrintConfig.cpp:1027
 msgid ""
 "It may be beneficial to increase the extruder motor current during the "
 "filament exchange sequence to allow for rapid ramming feed rates and to "
 "overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1077
+#: src/libslic3r/PrintConfig.cpp:1035
 msgid ""
 "This is the acceleration your printer will use for infill. Set zero to "
 "disable acceleration control for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1085
+#: src/libslic3r/PrintConfig.cpp:1043
 msgid "Combine infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1087
+#: src/libslic3r/PrintConfig.cpp:1045
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1090
+#: src/libslic3r/PrintConfig.cpp:1048
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1096
-msgid "Length of the infill anchor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1098
-msgid ""
-"Connect an infill line to an internal perimeter with a short segment of an "
-"additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than infill_anchor_max is found, the infill line is "
-"connected to a perimeter segment at just one side and the length of the "
-"perimeter segment taken is limited to this parameter, but no longer than "
-"anchor_length_max. Set this parameter to zero to disable anchoring "
-"perimeters connected to a single infill line."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1113
-msgid "0 (no open anchors)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1140
-msgid "1000 (unlimited)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1123
-msgid "Maximum length of the infill anchor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1125
-msgid ""
-"Connect an infill line to an internal perimeter with a short segment of an "
-"additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than this parameter is found, the infill line is connected "
-"to a perimeter segment at just one side and the length of the perimeter "
-"segment taken is limited to infill_anchor, but no longer than this "
-"parameter. Set this parameter to zero to disable anchoring."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1135
-msgid "0 (not anchored)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1054
 msgid "Infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1147
+#: src/libslic3r/PrintConfig.cpp:1056
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1155
+#: src/libslic3r/PrintConfig.cpp:1064
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -9434,32 +9034,32 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1165
+#: src/libslic3r/PrintConfig.cpp:1074
 msgid "Infill before perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1166
+#: src/libslic3r/PrintConfig.cpp:1075
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1171
+#: src/libslic3r/PrintConfig.cpp:1080
 msgid "Only infill where needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1173
+#: src/libslic3r/PrintConfig.cpp:1082
 msgid ""
 "This option will limit infill to the areas actually needed for supporting "
 "ceilings (it will act as internal support material). If enabled, slows down "
 "the G-code generation due to the multiple checks involved."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1180
+#: src/libslic3r/PrintConfig.cpp:1089
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1182
+#: src/libslic3r/PrintConfig.cpp:1091
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -9467,71 +9067,59 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1193
+#: src/libslic3r/PrintConfig.cpp:1102
 msgid "Speed for printing the internal fill. Set to zero for auto."
-msgstr ""
+msgstr "Speed for printing the internal fill. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:1201
+#: src/libslic3r/PrintConfig.cpp:1110
 msgid "Inherits profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1202
+#: src/libslic3r/PrintConfig.cpp:1111
 msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1215
+#: src/libslic3r/PrintConfig.cpp:1124
 msgid "Interface shells"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1216
+#: src/libslic3r/PrintConfig.cpp:1125
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1224
+#: src/libslic3r/PrintConfig.cpp:1133
 msgid "Enable ironing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1225
+#: src/libslic3r/PrintConfig.cpp:1134
 msgid ""
 "Enable ironing of the top layers with the hot print head for smooth surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1233
+#: src/libslic3r/PrintConfig.cpp:1140 src/libslic3r/PrintConfig.cpp:1142
 msgid "Ironing Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1238
-msgid "All top surfaces"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1239
-msgid "Topmost surface only"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1240
-msgid "All solid surfaces"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1245
+#: src/libslic3r/PrintConfig.cpp:1154
 msgid "Flow rate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1247
+#: src/libslic3r/PrintConfig.cpp:1156
 msgid "Percent of a flow rate relative to object's normal layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1255
+#: src/libslic3r/PrintConfig.cpp:1164
 msgid "Spacing between ironing passes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1257
+#: src/libslic3r/PrintConfig.cpp:1166
 msgid "Distance between ironing lines"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1274
+#: src/libslic3r/PrintConfig.cpp:1183
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -9539,11 +9127,11 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1285
+#: src/libslic3r/PrintConfig.cpp:1194
 msgid "Supports remaining times"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1286
+#: src/libslic3r/PrintConfig.cpp:1195
 msgid ""
 "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
 "intervals into the G-code to let the firmware show accurate remaining time. "
@@ -9551,175 +9139,175 @@ msgid ""
 "firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1294
+#: src/libslic3r/PrintConfig.cpp:1203
 msgid "Supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1295
+#: src/libslic3r/PrintConfig.cpp:1204
 msgid "The firmware supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1300
+#: src/libslic3r/PrintConfig.cpp:1209
 msgid "How to apply limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1301
+#: src/libslic3r/PrintConfig.cpp:1210
 msgid "Purpose of Machine Limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1303
+#: src/libslic3r/PrintConfig.cpp:1212
 msgid "How to apply the Machine Limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1308
+#: src/libslic3r/PrintConfig.cpp:1217
 msgid "Emit to G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1309
+#: src/libslic3r/PrintConfig.cpp:1218
 msgid "Use for time estimate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1310
+#: src/libslic3r/PrintConfig.cpp:1219
 msgid "Ignore"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1333
+#: src/libslic3r/PrintConfig.cpp:1242
 msgid "Maximum feedrate X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1334
+#: src/libslic3r/PrintConfig.cpp:1243
 msgid "Maximum feedrate Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1335
+#: src/libslic3r/PrintConfig.cpp:1244
 msgid "Maximum feedrate Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1336
+#: src/libslic3r/PrintConfig.cpp:1245
 msgid "Maximum feedrate E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1339
+#: src/libslic3r/PrintConfig.cpp:1248
 msgid "Maximum feedrate of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1340
+#: src/libslic3r/PrintConfig.cpp:1249
 msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1341
+#: src/libslic3r/PrintConfig.cpp:1250
 msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1342
+#: src/libslic3r/PrintConfig.cpp:1251
 msgid "Maximum feedrate of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1350
+#: src/libslic3r/PrintConfig.cpp:1259
 msgid "Maximum acceleration X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1351
+#: src/libslic3r/PrintConfig.cpp:1260
 msgid "Maximum acceleration Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1352
+#: src/libslic3r/PrintConfig.cpp:1261
 msgid "Maximum acceleration Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1353
+#: src/libslic3r/PrintConfig.cpp:1262
 msgid "Maximum acceleration E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1356
+#: src/libslic3r/PrintConfig.cpp:1265
 msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1357
+#: src/libslic3r/PrintConfig.cpp:1266
 msgid "Maximum acceleration of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1358
+#: src/libslic3r/PrintConfig.cpp:1267
 msgid "Maximum acceleration of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1359
+#: src/libslic3r/PrintConfig.cpp:1268
 msgid "Maximum acceleration of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1367
+#: src/libslic3r/PrintConfig.cpp:1276
 msgid "Maximum jerk X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1368
+#: src/libslic3r/PrintConfig.cpp:1277
 msgid "Maximum jerk Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1369
+#: src/libslic3r/PrintConfig.cpp:1278
 msgid "Maximum jerk Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1370
+#: src/libslic3r/PrintConfig.cpp:1279
 msgid "Maximum jerk E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1373
+#: src/libslic3r/PrintConfig.cpp:1282
 msgid "Maximum jerk of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1374
+#: src/libslic3r/PrintConfig.cpp:1283
 msgid "Maximum jerk of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1375
+#: src/libslic3r/PrintConfig.cpp:1284
 msgid "Maximum jerk of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1376
+#: src/libslic3r/PrintConfig.cpp:1285
 msgid "Maximum jerk of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1386
+#: src/libslic3r/PrintConfig.cpp:1295
 msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1388
+#: src/libslic3r/PrintConfig.cpp:1297
 msgid "Minimum feedrate when extruding (M205 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1396
+#: src/libslic3r/PrintConfig.cpp:1305
 msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1398
+#: src/libslic3r/PrintConfig.cpp:1307
 msgid "Minimum travel feedrate (M205 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1406
+#: src/libslic3r/PrintConfig.cpp:1315
 msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1317
 msgid "Maximum acceleration when extruding (M204 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1416
+#: src/libslic3r/PrintConfig.cpp:1325
 msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1327
 msgid "Maximum acceleration when retracting (M204 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1425 src/libslic3r/PrintConfig.cpp:1434
+#: src/libslic3r/PrintConfig.cpp:1334 src/libslic3r/PrintConfig.cpp:1343
 msgid "Max"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1426
+#: src/libslic3r/PrintConfig.cpp:1335
 msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1435
+#: src/libslic3r/PrintConfig.cpp:1344
 #, possible-c-format
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
@@ -9728,28 +9316,28 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1445
+#: src/libslic3r/PrintConfig.cpp:1354
 msgid "Max print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1446
+#: src/libslic3r/PrintConfig.cpp:1355
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1456
+#: src/libslic3r/PrintConfig.cpp:1365
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1465
+#: src/libslic3r/PrintConfig.cpp:1374
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1466 src/libslic3r/PrintConfig.cpp:1477
+#: src/libslic3r/PrintConfig.cpp:1375 src/libslic3r/PrintConfig.cpp:1386
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
@@ -9757,95 +9345,95 @@ msgid ""
 "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:1481
+#: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1390
 msgid "mm³/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1476
+#: src/libslic3r/PrintConfig.cpp:1385
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1488 src/libslic3r/PrintConfig.cpp:1497
+#: src/libslic3r/PrintConfig.cpp:1397 src/libslic3r/PrintConfig.cpp:1406
 msgid "Min"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1489
+#: src/libslic3r/PrintConfig.cpp:1398
 msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1498
+#: src/libslic3r/PrintConfig.cpp:1407
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1506
+#: src/libslic3r/PrintConfig.cpp:1415
 msgid "Min print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1507
+#: src/libslic3r/PrintConfig.cpp:1416
 msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1514
+#: src/libslic3r/PrintConfig.cpp:1423
 msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1515
+#: src/libslic3r/PrintConfig.cpp:1424
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1524
+#: src/libslic3r/PrintConfig.cpp:1433
 msgid "Configuration notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1525
+#: src/libslic3r/PrintConfig.cpp:1434
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1535
+#: src/libslic3r/PrintConfig.cpp:1444
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1540
+#: src/libslic3r/PrintConfig.cpp:1449
 msgid "Host Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1541
+#: src/libslic3r/PrintConfig.cpp:1450
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field must contain "
 "the kind of the host."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1558
+#: src/libslic3r/PrintConfig.cpp:1467
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1559
+#: src/libslic3r/PrintConfig.cpp:1468
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1566
+#: src/libslic3r/PrintConfig.cpp:1475
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing. It will enable a tall skirt automatically and move extruders outside "
 "such skirt when changing temperatures."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1573
+#: src/libslic3r/PrintConfig.cpp:1482
 msgid "Output filename format"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1574
+#: src/libslic3r/PrintConfig.cpp:1483
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
@@ -9853,31 +9441,31 @@ msgid ""
 "[input_filename], [input_filename_base]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1583
+#: src/libslic3r/PrintConfig.cpp:1492
 msgid "Detect bridging perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1585
+#: src/libslic3r/PrintConfig.cpp:1494
 msgid ""
 "Experimental option to adjust flow for overhangs (bridge flow will be used), "
 "to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1591
+#: src/libslic3r/PrintConfig.cpp:1500
 msgid "Filament parking position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1592
+#: src/libslic3r/PrintConfig.cpp:1501
 msgid ""
 "Distance of the extruder tip from the position where the filament is parked "
 "when unloaded. This should match the value in printer firmware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1600
+#: src/libslic3r/PrintConfig.cpp:1509
 msgid "Extra loading distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1601
+#: src/libslic3r/PrintConfig.cpp:1510
 msgid ""
 "When set to zero, the distance the filament is moved from parking position "
 "during load is exactly the same as it was moved back during unload. When "
@@ -9885,27 +9473,28 @@ msgid ""
 "than unloading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1609 src/libslic3r/PrintConfig.cpp:1626
-#: src/libslic3r/PrintConfig.cpp:1639 src/libslic3r/PrintConfig.cpp:1649
+#: src/libslic3r/PrintConfig.cpp:1518 src/libslic3r/PrintConfig.cpp:1536
+#: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1559
 msgid "Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1610
+#: src/libslic3r/PrintConfig.cpp:1519
 msgid ""
-"This is the acceleration your printer will use for perimeters. Set zero to "
-"disable acceleration control for perimeters."
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1617
+#: src/libslic3r/PrintConfig.cpp:1527
 msgid "Perimeter extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1619
+#: src/libslic3r/PrintConfig.cpp:1529
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1628
+#: src/libslic3r/PrintConfig.cpp:1538
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -9914,12 +9503,12 @@ msgid ""
 "it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1641
+#: src/libslic3r/PrintConfig.cpp:1551
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
-msgstr ""
+msgstr "Speed for perimeters (contours, aka vertical shells). הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:1651
+#: src/libslic3r/PrintConfig.cpp:1561
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -9927,11 +9516,11 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1655
+#: src/libslic3r/PrintConfig.cpp:1565
 msgid "(minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1663
+#: src/libslic3r/PrintConfig.cpp:1573
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -9940,55 +9529,55 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1675
+#: src/libslic3r/PrintConfig.cpp:1585
 msgid "Printer type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1676
+#: src/libslic3r/PrintConfig.cpp:1586
 msgid "Type of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1681
+#: src/libslic3r/PrintConfig.cpp:1591
 msgid "Printer notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1682
+#: src/libslic3r/PrintConfig.cpp:1592
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1690
+#: src/libslic3r/PrintConfig.cpp:1600
 msgid "Printer vendor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1691
+#: src/libslic3r/PrintConfig.cpp:1601
 msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1696
+#: src/libslic3r/PrintConfig.cpp:1606
 msgid "Printer variant"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1697
+#: src/libslic3r/PrintConfig.cpp:1607
 msgid ""
 "Name of the printer variant. For example, the printer variants may be "
 "differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1714
+#: src/libslic3r/PrintConfig.cpp:1620
 msgid "Raft layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1716
+#: src/libslic3r/PrintConfig.cpp:1622
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1724
+#: src/libslic3r/PrintConfig.cpp:1630
 msgid "Resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1725
+#: src/libslic3r/PrintConfig.cpp:1631
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -9996,277 +9585,277 @@ msgid ""
 "simplification and use full resolution from input."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1735
+#: src/libslic3r/PrintConfig.cpp:1641
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1736
+#: src/libslic3r/PrintConfig.cpp:1642
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1742
+#: src/libslic3r/PrintConfig.cpp:1648
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1743
+#: src/libslic3r/PrintConfig.cpp:1649
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1750
+#: src/libslic3r/PrintConfig.cpp:1656
 msgid "Retract on layer change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1751
+#: src/libslic3r/PrintConfig.cpp:1657
 msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1764
+#: src/libslic3r/PrintConfig.cpp:1662 src/libslic3r/PrintConfig.cpp:1670
 msgid "Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1757
+#: src/libslic3r/PrintConfig.cpp:1663
 msgid "Retraction Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1758
+#: src/libslic3r/PrintConfig.cpp:1664
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1760 src/libslic3r/PrintConfig.cpp:1769
+#: src/libslic3r/PrintConfig.cpp:1666 src/libslic3r/PrintConfig.cpp:1675
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1765
+#: src/libslic3r/PrintConfig.cpp:1671
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1766
+#: src/libslic3r/PrintConfig.cpp:1672
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1774
+#: src/libslic3r/PrintConfig.cpp:1680
 msgid "Lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1775
+#: src/libslic3r/PrintConfig.cpp:1681
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1782
+#: src/libslic3r/PrintConfig.cpp:1688
 msgid "Above Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1783
+#: src/libslic3r/PrintConfig.cpp:1689
 msgid "Only lift Z above"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1784
+#: src/libslic3r/PrintConfig.cpp:1690
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1791
+#: src/libslic3r/PrintConfig.cpp:1697
 msgid "Below Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1792
+#: src/libslic3r/PrintConfig.cpp:1698
 msgid "Only lift Z below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1793
+#: src/libslic3r/PrintConfig.cpp:1699
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1801 src/libslic3r/PrintConfig.cpp:1809
+#: src/libslic3r/PrintConfig.cpp:1707 src/libslic3r/PrintConfig.cpp:1715
 msgid "Extra length on restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1802
+#: src/libslic3r/PrintConfig.cpp:1708
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1810
+#: src/libslic3r/PrintConfig.cpp:1716
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:1818
+#: src/libslic3r/PrintConfig.cpp:1723 src/libslic3r/PrintConfig.cpp:1724
 msgid "Retraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1819
+#: src/libslic3r/PrintConfig.cpp:1725
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1825 src/libslic3r/PrintConfig.cpp:1826
+#: src/libslic3r/PrintConfig.cpp:1731 src/libslic3r/PrintConfig.cpp:1732
 msgid "Deretraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1827
+#: src/libslic3r/PrintConfig.cpp:1733
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1834
+#: src/libslic3r/PrintConfig.cpp:1740
 msgid "Seam position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1836
+#: src/libslic3r/PrintConfig.cpp:1742
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1842
+#: src/libslic3r/PrintConfig.cpp:1748
 msgid "Random"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1843
+#: src/libslic3r/PrintConfig.cpp:1749
 msgid "Nearest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1844
+#: src/libslic3r/PrintConfig.cpp:1750
 msgid "Aligned"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1852
+#: src/libslic3r/PrintConfig.cpp:1758
 msgid "Direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1854
+#: src/libslic3r/PrintConfig.cpp:1760
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1855
+#: src/libslic3r/PrintConfig.cpp:1761
 msgid "Seam preferred direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1862
+#: src/libslic3r/PrintConfig.cpp:1768
 msgid "Jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1864
+#: src/libslic3r/PrintConfig.cpp:1770
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1865
+#: src/libslic3r/PrintConfig.cpp:1771
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:1778
 msgid "Distance from object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1873
+#: src/libslic3r/PrintConfig.cpp:1779
 msgid ""
 "Distance between skirt and object(s). Set this to zero to attach the skirt "
 "to the object(s) and get a brim for better adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1880
+#: src/libslic3r/PrintConfig.cpp:1786
 msgid "Skirt height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1881
+#: src/libslic3r/PrintConfig.cpp:1787
 msgid ""
 "Height of skirt expressed in layers. Set this to a tall value to use skirt "
 "as a shield against drafts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1888
+#: src/libslic3r/PrintConfig.cpp:1794
 msgid "Draft shield"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1889
+#: src/libslic3r/PrintConfig.cpp:1795
 msgid ""
 "If enabled, the skirt will be as tall as a highest printed object. This is "
 "useful to protect an ABS or ASA print from warping and detaching from print "
 "bed due to wind draft."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1895
+#: src/libslic3r/PrintConfig.cpp:1801
 msgid "Loops (minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1896
+#: src/libslic3r/PrintConfig.cpp:1802
 msgid "Skirt Loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1897
+#: src/libslic3r/PrintConfig.cpp:1803
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1905
+#: src/libslic3r/PrintConfig.cpp:1811
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1906
+#: src/libslic3r/PrintConfig.cpp:1812
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1915
+#: src/libslic3r/PrintConfig.cpp:1821
 msgid "Small perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1917
+#: src/libslic3r/PrintConfig.cpp:1823
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
+msgstr "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:1927
+#: src/libslic3r/PrintConfig.cpp:1833
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1929
+#: src/libslic3r/PrintConfig.cpp:1835
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1930
+#: src/libslic3r/PrintConfig.cpp:1836
 msgid "mm²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1936
+#: src/libslic3r/PrintConfig.cpp:1842
 msgid "Solid infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1938
+#: src/libslic3r/PrintConfig.cpp:1844
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1944
+#: src/libslic3r/PrintConfig.cpp:1850
 msgid "Solid infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1946
+#: src/libslic3r/PrintConfig.cpp:1852
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -10274,7 +9863,7 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1958
+#: src/libslic3r/PrintConfig.cpp:1864
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -10282,46 +9871,46 @@ msgid ""
 "(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1969
+#: src/libslic3r/PrintConfig.cpp:1875
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed above. Set to zero for auto."
-msgstr ""
+msgstr "Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:1981
+#: src/libslic3r/PrintConfig.cpp:1887
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:1988
+#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1894
 msgid "Minimum thickness of a top / bottom shell"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1994
+#: src/libslic3r/PrintConfig.cpp:1900
 msgid "Spiral vase"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1995
+#: src/libslic3r/PrintConfig.cpp:1901
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
 "no infill, no top solid layers and no support material. You can still set "
 "any number of bottom solid layers as well as skirt/brim loops. It won't work "
-"when printing more than one single object."
+"when printing more than an object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2003
+#: src/libslic3r/PrintConfig.cpp:1909
 msgid "Temperature variation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2004
+#: src/libslic3r/PrintConfig.cpp:1910
 msgid ""
 "Temperature difference to be applied when an extruder is not active. Enables "
 "a full-height \"sacrificial\" skirt on which the nozzles are periodically "
 "wiped."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2014
+#: src/libslic3r/PrintConfig.cpp:1920
 msgid ""
 "This start procedure is inserted at the beginning, after bed has reached the "
 "target temperature and extruder just started heating, and before extruder "
@@ -10332,7 +9921,7 @@ msgid ""
 "put a \"M109 S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2029
+#: src/libslic3r/PrintConfig.cpp:1935
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode (and after any toolchange to this filament in case of multi-material "
@@ -10345,45 +9934,45 @@ msgid ""
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2045
+#: src/libslic3r/PrintConfig.cpp:1951
 msgid "Color change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2046
+#: src/libslic3r/PrintConfig.cpp:1952
 msgid "This G-code will be used as a code for the color change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2055
+#: src/libslic3r/PrintConfig.cpp:1961
 msgid "This G-code will be used as a code for the pause print"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2064
+#: src/libslic3r/PrintConfig.cpp:1970
 msgid "This G-code will be used as a custom code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2072
+#: src/libslic3r/PrintConfig.cpp:1978
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2073
+#: src/libslic3r/PrintConfig.cpp:1979
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2078
+#: src/libslic3r/PrintConfig.cpp:1984
 msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2079
+#: src/libslic3r/PrintConfig.cpp:1985
 msgid ""
 "If enabled, all printing extruders will be primed at the front edge of the "
 "print bed at the start of the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2084
+#: src/libslic3r/PrintConfig.cpp:1990
 msgid "No sparse layers (EXPERIMENTAL)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2085
+#: src/libslic3r/PrintConfig.cpp:1991
 msgid ""
 "If enabled, the wipe tower will not be printed on layers with no "
 "toolchanges. On layers with a toolchange, extruder will travel downward to "
@@ -10391,75 +9980,75 @@ msgid ""
 "with the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2092
+#: src/libslic3r/PrintConfig.cpp:1998
 msgid "Generate support material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2094
+#: src/libslic3r/PrintConfig.cpp:2000
 msgid "Enable support material generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2098
+#: src/libslic3r/PrintConfig.cpp:2004
 msgid "Auto generated supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2100
+#: src/libslic3r/PrintConfig.cpp:2006
 msgid ""
 "If checked, supports will be generated automatically based on the overhang "
 "threshold value. If unchecked, supports will be generated inside the "
 "\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2106
+#: src/libslic3r/PrintConfig.cpp:2012
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2108
+#: src/libslic3r/PrintConfig.cpp:2014
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2118
+#: src/libslic3r/PrintConfig.cpp:2024
 msgid "Pattern angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2120
+#: src/libslic3r/PrintConfig.cpp:2026
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2925
+#: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2831
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2136
+#: src/libslic3r/PrintConfig.cpp:2042
 msgid "Contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2138
+#: src/libslic3r/PrintConfig.cpp:2044
 msgid ""
 "The vertical distance between object and support material interface. Setting "
 "this to 0 will also prevent Slic3r from using bridge flow and speed for the "
 "first object layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2145
+#: src/libslic3r/PrintConfig.cpp:2051
 msgid "0 (soluble)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2146
+#: src/libslic3r/PrintConfig.cpp:2052
 msgid "0.2 (detachable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2151
+#: src/libslic3r/PrintConfig.cpp:2057
 msgid "Enforce support for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2153
+#: src/libslic3r/PrintConfig.cpp:2059
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -10467,21 +10056,21 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2158
+#: src/libslic3r/PrintConfig.cpp:2064
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2164
+#: src/libslic3r/PrintConfig.cpp:2070
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2166
+#: src/libslic3r/PrintConfig.cpp:2072
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2175
+#: src/libslic3r/PrintConfig.cpp:2081
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -10489,89 +10078,89 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2184
+#: src/libslic3r/PrintConfig.cpp:2090
 msgid "Interface loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2186
+#: src/libslic3r/PrintConfig.cpp:2092
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2191
+#: src/libslic3r/PrintConfig.cpp:2097
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2193
+#: src/libslic3r/PrintConfig.cpp:2099
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2200
+#: src/libslic3r/PrintConfig.cpp:2106
 msgid "Interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2202
+#: src/libslic3r/PrintConfig.cpp:2108
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2209
+#: src/libslic3r/PrintConfig.cpp:2115
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2211
+#: src/libslic3r/PrintConfig.cpp:2117
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2220
+#: src/libslic3r/PrintConfig.cpp:2126
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2229
+#: src/libslic3r/PrintConfig.cpp:2135
 msgid "Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2231
+#: src/libslic3r/PrintConfig.cpp:2137
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2237
+#: src/libslic3r/PrintConfig.cpp:2143
 msgid "Rectilinear grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2243
+#: src/libslic3r/PrintConfig.cpp:2149
 msgid "Pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2245
+#: src/libslic3r/PrintConfig.cpp:2151
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2254
+#: src/libslic3r/PrintConfig.cpp:2160
 msgid "Speed for printing support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2261
+#: src/libslic3r/PrintConfig.cpp:2167
 msgid "Synchronize with object layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2263
+#: src/libslic3r/PrintConfig.cpp:2169
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2269
+#: src/libslic3r/PrintConfig.cpp:2175
 msgid "Overhang threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2271
+#: src/libslic3r/PrintConfig.cpp:2177
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -10580,47 +10169,47 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2283
+#: src/libslic3r/PrintConfig.cpp:2189
 msgid "With sheath around the support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2285
+#: src/libslic3r/PrintConfig.cpp:2191
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2292
+#: src/libslic3r/PrintConfig.cpp:2198
 msgid ""
 "Nozzle temperature for layers after the first one. Set this to zero to "
 "disable temperature control commands in the output G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2295
+#: src/libslic3r/PrintConfig.cpp:2201
 msgid "Nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2301
+#: src/libslic3r/PrintConfig.cpp:2207
 msgid "Detect thin walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2303
+#: src/libslic3r/PrintConfig.cpp:2209
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2309
+#: src/libslic3r/PrintConfig.cpp:2215
 msgid "Threads"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2310
+#: src/libslic3r/PrintConfig.cpp:2216
 msgid ""
 "Threads are used to parallelize long-running tasks. Optimal threads number "
 "is slightly above the number of available cores/processors."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2322
+#: src/libslic3r/PrintConfig.cpp:2228
 msgid ""
 "This custom code is inserted before every toolchange. Placeholder variables "
 "for all PrusaSlicer settings as well as {previous_extruder} and "
@@ -10630,7 +10219,7 @@ msgid ""
 "behaviour both before and after the toolchange."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2335
+#: src/libslic3r/PrintConfig.cpp:2241
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -10639,63 +10228,63 @@ msgid ""
 "percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2347
+#: src/libslic3r/PrintConfig.cpp:2253
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
 "slow down this to get a nicer surface finish. This can be expressed as a "
 "percentage (for example: 80%) over the solid infill speed above. Set to zero "
 "for auto."
-msgstr ""
+msgstr "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:2362
+#: src/libslic3r/PrintConfig.cpp:2268
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2363
+#: src/libslic3r/PrintConfig.cpp:2269
 msgid "Top solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2371
+#: src/libslic3r/PrintConfig.cpp:2277
 msgid ""
 "The number of top solid layers is increased above top_solid_layers if "
 "necessary to satisfy minimum thickness of top shell. This is useful to "
 "prevent pillowing effect when printing with variable layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2374
+#: src/libslic3r/PrintConfig.cpp:2280
 msgid "Minimum top shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2381
+#: src/libslic3r/PrintConfig.cpp:2287
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2389
+#: src/libslic3r/PrintConfig.cpp:2295
 msgid "Use firmware retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2390
+#: src/libslic3r/PrintConfig.cpp:2296
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2396
+#: src/libslic3r/PrintConfig.cpp:2302
 msgid "Use relative E distances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2397
+#: src/libslic3r/PrintConfig.cpp:2303
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2403
+#: src/libslic3r/PrintConfig.cpp:2309
 msgid "Use volumetric E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2404
+#: src/libslic3r/PrintConfig.cpp:2310
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -10705,127 +10294,127 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2320
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2415
+#: src/libslic3r/PrintConfig.cpp:2321
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2421
+#: src/libslic3r/PrintConfig.cpp:2327
 msgid "Wipe while retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2422
+#: src/libslic3r/PrintConfig.cpp:2328
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2429
+#: src/libslic3r/PrintConfig.cpp:2335
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2435
+#: src/libslic3r/PrintConfig.cpp:2341
 msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2436
+#: src/libslic3r/PrintConfig.cpp:2342
 msgid ""
 "This vector saves required volumes to change from/to each tool used on the "
 "wipe tower. These values are used to simplify creation of the full purging "
 "volumes below."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2442
+#: src/libslic3r/PrintConfig.cpp:2348
 msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2443
+#: src/libslic3r/PrintConfig.cpp:2349
 msgid ""
 "This matrix describes volumes (in cubic milimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2452
+#: src/libslic3r/PrintConfig.cpp:2358
 msgid "Position X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2453
+#: src/libslic3r/PrintConfig.cpp:2359
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2459
+#: src/libslic3r/PrintConfig.cpp:2365
 msgid "Position Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2460
+#: src/libslic3r/PrintConfig.cpp:2366
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2467
+#: src/libslic3r/PrintConfig.cpp:2373
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2473
+#: src/libslic3r/PrintConfig.cpp:2379
 msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2474
+#: src/libslic3r/PrintConfig.cpp:2380
 msgid "Wipe tower rotation angle with respect to x-axis."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2481
+#: src/libslic3r/PrintConfig.cpp:2387
 msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2482
+#: src/libslic3r/PrintConfig.cpp:2388
 msgid ""
 "Purging after toolchange will done inside this object's infills. This lowers "
 "the amount of waste but may result in longer print time  due to additional "
 "travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2489
+#: src/libslic3r/PrintConfig.cpp:2395
 msgid "Wipe into this object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2490
+#: src/libslic3r/PrintConfig.cpp:2396
 msgid ""
 "Object will be used to purge the nozzle after a toolchange to save material "
 "that would otherwise end up in the wipe tower and decrease print time. "
 "Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2496
+#: src/libslic3r/PrintConfig.cpp:2402
 msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2497
+#: src/libslic3r/PrintConfig.cpp:2403
 msgid "Maximal distance between supports on sparse infill sections."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2503
+#: src/libslic3r/PrintConfig.cpp:2409
 msgid "XY Size Compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2505
+#: src/libslic3r/PrintConfig.cpp:2411
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
 "tuning hole sizes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2513
+#: src/libslic3r/PrintConfig.cpp:2419
 msgid "Z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2514
+#: src/libslic3r/PrintConfig.cpp:2420
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -10833,414 +10422,414 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2581
+#: src/libslic3r/PrintConfig.cpp:2487
 msgid "Display width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2582
+#: src/libslic3r/PrintConfig.cpp:2488
 msgid "Width of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2587
+#: src/libslic3r/PrintConfig.cpp:2493
 msgid "Display height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2588
+#: src/libslic3r/PrintConfig.cpp:2494
 msgid "Height of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2593
+#: src/libslic3r/PrintConfig.cpp:2499
 msgid "Number of pixels in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2595
+#: src/libslic3r/PrintConfig.cpp:2501
 msgid "Number of pixels in X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2601
+#: src/libslic3r/PrintConfig.cpp:2507
 msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2606
+#: src/libslic3r/PrintConfig.cpp:2512
 msgid "Display horizontal mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2607
+#: src/libslic3r/PrintConfig.cpp:2513
 msgid "Mirror horizontally"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2608
+#: src/libslic3r/PrintConfig.cpp:2514
 msgid "Enable horizontal mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2613
+#: src/libslic3r/PrintConfig.cpp:2519
 msgid "Display vertical mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2614
+#: src/libslic3r/PrintConfig.cpp:2520
 msgid "Mirror vertically"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2615
+#: src/libslic3r/PrintConfig.cpp:2521
 msgid "Enable vertical mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2620
+#: src/libslic3r/PrintConfig.cpp:2526
 msgid "Display orientation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2621
+#: src/libslic3r/PrintConfig.cpp:2527
 msgid ""
 "Set the actual LCD display orientation inside the SLA printer. Portrait mode "
 "will flip the meaning of display width and height parameters and the output "
 "images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2627
+#: src/libslic3r/PrintConfig.cpp:2533
 msgid "Landscape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2628
+#: src/libslic3r/PrintConfig.cpp:2534
 msgid "Portrait"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2633
+#: src/libslic3r/PrintConfig.cpp:2539
 msgid "Fast"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2634
+#: src/libslic3r/PrintConfig.cpp:2540
 msgid "Fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2635
+#: src/libslic3r/PrintConfig.cpp:2541
 msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2642
+#: src/libslic3r/PrintConfig.cpp:2548
 msgid "Slow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2643
+#: src/libslic3r/PrintConfig.cpp:2549
 msgid "Slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2644
+#: src/libslic3r/PrintConfig.cpp:2550
 msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2651
+#: src/libslic3r/PrintConfig.cpp:2557
 msgid "Area fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2652
+#: src/libslic3r/PrintConfig.cpp:2558
 msgid ""
 "The percentage of the bed area. \n"
 "If the print area exceeds the specified value, \n"
 "then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2660
-#: src/libslic3r/PrintConfig.cpp:2661
+#: src/libslic3r/PrintConfig.cpp:2565 src/libslic3r/PrintConfig.cpp:2566
+#: src/libslic3r/PrintConfig.cpp:2567
 msgid "Printer scaling correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2668
+#: src/libslic3r/PrintConfig.cpp:2573 src/libslic3r/PrintConfig.cpp:2574
 msgid "Printer absolute correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2669
+#: src/libslic3r/PrintConfig.cpp:2575
 msgid ""
 "Will inflate or deflate the sliced 2D polygons according to the sign of the "
 "correction."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2675
+#: src/libslic3r/PrintConfig.cpp:2581
 msgid "Elephant foot minimum width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2677
+#: src/libslic3r/PrintConfig.cpp:2583
 msgid ""
 "Minimum width of features to maintain when doing elephant foot compensation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2685
+#: src/libslic3r/PrintConfig.cpp:2590 src/libslic3r/PrintConfig.cpp:2591
 msgid "Printer gamma correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2686
+#: src/libslic3r/PrintConfig.cpp:2592
 msgid ""
 "This will apply a gamma correction to the rasterized 2D polygons. A gamma "
 "value of zero means thresholding with the threshold in the middle. This "
 "behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2699
+#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2605
 msgid "SLA material type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2711
+#: src/libslic3r/PrintConfig.cpp:2616 src/libslic3r/PrintConfig.cpp:2617
 msgid "Initial layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2718
+#: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2624
 msgid "Bottle volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2719
+#: src/libslic3r/PrintConfig.cpp:2625
 msgid "ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2724 src/libslic3r/PrintConfig.cpp:2725
+#: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2631
 msgid "Bottle weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2726
+#: src/libslic3r/PrintConfig.cpp:2632
 msgid "kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2733
+#: src/libslic3r/PrintConfig.cpp:2639
 msgid "g/ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2740
+#: src/libslic3r/PrintConfig.cpp:2646
 msgid "money/bottle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2745
+#: src/libslic3r/PrintConfig.cpp:2651
 msgid "Faded layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2746
+#: src/libslic3r/PrintConfig.cpp:2652
 msgid ""
 "Number of the layers needed for the exposure time fade from initial exposure "
 "time to the exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2753 src/libslic3r/PrintConfig.cpp:2754
+#: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2660
 msgid "Minimum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2761 src/libslic3r/PrintConfig.cpp:2762
+#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2668
 msgid "Maximum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2769 src/libslic3r/PrintConfig.cpp:2770
+#: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2676
 msgid "Exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2776 src/libslic3r/PrintConfig.cpp:2777
+#: src/libslic3r/PrintConfig.cpp:2682 src/libslic3r/PrintConfig.cpp:2683
 msgid "Minimum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2784 src/libslic3r/PrintConfig.cpp:2785
+#: src/libslic3r/PrintConfig.cpp:2690 src/libslic3r/PrintConfig.cpp:2691
 msgid "Maximum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2792 src/libslic3r/PrintConfig.cpp:2793
+#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2699
 msgid "Initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2799 src/libslic3r/PrintConfig.cpp:2800
+#: src/libslic3r/PrintConfig.cpp:2705 src/libslic3r/PrintConfig.cpp:2706
 msgid "Correction for expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2806
+#: src/libslic3r/PrintConfig.cpp:2712
 msgid "SLA print material notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2807
+#: src/libslic3r/PrintConfig.cpp:2713
 msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2819 src/libslic3r/PrintConfig.cpp:2830
+#: src/libslic3r/PrintConfig.cpp:2725 src/libslic3r/PrintConfig.cpp:2736
 msgid "Default SLA material profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2841
+#: src/libslic3r/PrintConfig.cpp:2747
 msgid "Generate supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2843
+#: src/libslic3r/PrintConfig.cpp:2749
 msgid "Generate supports for the models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2848
+#: src/libslic3r/PrintConfig.cpp:2754
 msgid "Pinhead front diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2850
+#: src/libslic3r/PrintConfig.cpp:2756
 msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2857
+#: src/libslic3r/PrintConfig.cpp:2763
 msgid "Head penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2859
+#: src/libslic3r/PrintConfig.cpp:2765
 msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2866
+#: src/libslic3r/PrintConfig.cpp:2772
 msgid "Pinhead width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2868
+#: src/libslic3r/PrintConfig.cpp:2774
 msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2876
+#: src/libslic3r/PrintConfig.cpp:2782
 msgid "Pillar diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2878
+#: src/libslic3r/PrintConfig.cpp:2784
 msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2886
+#: src/libslic3r/PrintConfig.cpp:2792
 msgid "Small pillar diameter percent"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2888
+#: src/libslic3r/PrintConfig.cpp:2794
 msgid ""
 "The percentage of smaller pillars compared to the normal pillar diameter "
 "which are used in problematic areas where a normal pilla cannot fit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2897
+#: src/libslic3r/PrintConfig.cpp:2803
 msgid "Max bridges on a pillar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2899
+#: src/libslic3r/PrintConfig.cpp:2805
 msgid ""
 "Maximum number of bridges that can be placed on a pillar. Bridges hold "
 "support point pinheads and connect to pillars as small branches."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2907
+#: src/libslic3r/PrintConfig.cpp:2813
 msgid "Pillar connection mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2908
+#: src/libslic3r/PrintConfig.cpp:2814
 msgid ""
 "Controls the bridge type between two neighboring pillars. Can be zig-zag, "
 "cross (double zig-zag) or dynamic which will automatically switch between "
 "the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2916
+#: src/libslic3r/PrintConfig.cpp:2822
 msgid "Zig-Zag"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2917
+#: src/libslic3r/PrintConfig.cpp:2823
 msgid "Cross"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2918
+#: src/libslic3r/PrintConfig.cpp:2824
 msgid "Dynamic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2930
+#: src/libslic3r/PrintConfig.cpp:2836
 msgid "Pillar widening factor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2932
+#: src/libslic3r/PrintConfig.cpp:2838
 msgid ""
 "Merging bridges or pillars into another pillars can increase the radius. "
 "Zero means no increase, one means full increase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2941
+#: src/libslic3r/PrintConfig.cpp:2847
 msgid "Support base diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2943
+#: src/libslic3r/PrintConfig.cpp:2849
 msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2951
+#: src/libslic3r/PrintConfig.cpp:2857
 msgid "Support base height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2953
+#: src/libslic3r/PrintConfig.cpp:2859
 msgid "The height of the pillar base cone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2960
+#: src/libslic3r/PrintConfig.cpp:2866
 msgid "Support base safety distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2963
+#: src/libslic3r/PrintConfig.cpp:2869
 msgid ""
 "The minimum distance of the pillar base from the model in mm. Makes sense in "
 "zero elevation mode where a gap according to this parameter is inserted "
 "between the model and the pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2973
+#: src/libslic3r/PrintConfig.cpp:2879
 msgid "Critical angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2975
+#: src/libslic3r/PrintConfig.cpp:2881
 msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2983
+#: src/libslic3r/PrintConfig.cpp:2889
 msgid "Max bridge length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2985
+#: src/libslic3r/PrintConfig.cpp:2891
 msgid "The max length of a bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2992
+#: src/libslic3r/PrintConfig.cpp:2898
 msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2994
+#: src/libslic3r/PrintConfig.cpp:2900
 msgid ""
 "The max distance of two pillars to get linked with each other. A zero value "
 "will prohibit pillar cascading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3004
+#: src/libslic3r/PrintConfig.cpp:2910
 msgid ""
 "How much the supports should lift up the supported object. If \"Pad around "
 "object\" is enabled, this value is ignored."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3015
+#: src/libslic3r/PrintConfig.cpp:2921
 msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3021
+#: src/libslic3r/PrintConfig.cpp:2927
 msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3023
+#: src/libslic3r/PrintConfig.cpp:2929
 msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3029
+#: src/libslic3r/PrintConfig.cpp:2935
 msgid "Use pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3031
+#: src/libslic3r/PrintConfig.cpp:2937
 msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3036
+#: src/libslic3r/PrintConfig.cpp:2942
 msgid "Pad wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3038
+#: src/libslic3r/PrintConfig.cpp:2944
 msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3046
+#: src/libslic3r/PrintConfig.cpp:2952
 msgid "Pad wall height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3047
+#: src/libslic3r/PrintConfig.cpp:2953
 msgid ""
 "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
 "when enabling this feature, as some resins may produce an extreme suction "
@@ -11248,111 +10837,111 @@ msgid ""
 "difficult."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3060
+#: src/libslic3r/PrintConfig.cpp:2966
 msgid "Pad brim size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3061
+#: src/libslic3r/PrintConfig.cpp:2967
 msgid "How far should the pad extend around the contained geometry"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3071
+#: src/libslic3r/PrintConfig.cpp:2977
 msgid "Max merge distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3073
+#: src/libslic3r/PrintConfig.cpp:2979
 msgid ""
 "Some objects can get along with a few smaller pads instead of a single big "
 "one. This parameter defines how far the center of two smaller pads should "
 "be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3093
+#: src/libslic3r/PrintConfig.cpp:2999
 msgid "Pad wall slope"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3095
+#: src/libslic3r/PrintConfig.cpp:3001
 msgid ""
 "The slope of the pad wall relative to the bed plane. 90 degrees means "
 "straight walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3106
+#: src/libslic3r/PrintConfig.cpp:3012
 msgid "Create pad around object and ignore the support elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3111
+#: src/libslic3r/PrintConfig.cpp:3017
 msgid "Pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3113
+#: src/libslic3r/PrintConfig.cpp:3019
 msgid "Force pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3118
+#: src/libslic3r/PrintConfig.cpp:3024
 msgid "Pad object gap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3120
+#: src/libslic3r/PrintConfig.cpp:3026
 msgid ""
 "The gap between the object bottom and the generated pad in zero elevation "
 "mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3129
+#: src/libslic3r/PrintConfig.cpp:3035
 msgid "Pad object connector stride"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3131
+#: src/libslic3r/PrintConfig.cpp:3037
 msgid ""
 "Distance between two connector sticks which connect the object and the "
 "generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3138
+#: src/libslic3r/PrintConfig.cpp:3044
 msgid "Pad object connector width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3140
+#: src/libslic3r/PrintConfig.cpp:3046
 msgid ""
 "Width of the connector sticks which connect the object and the generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3147
+#: src/libslic3r/PrintConfig.cpp:3053
 msgid "Pad object connector penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3150
+#: src/libslic3r/PrintConfig.cpp:3056
 msgid "How much should the tiny connectors penetrate into the model body."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3157
+#: src/libslic3r/PrintConfig.cpp:3063
 msgid "Enable hollowing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3159
+#: src/libslic3r/PrintConfig.cpp:3065
 msgid "Hollow out a model to have an empty interior"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3164
+#: src/libslic3r/PrintConfig.cpp:3070
 msgid "Wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3166
+#: src/libslic3r/PrintConfig.cpp:3072
 msgid "Minimum wall thickness of a hollowed model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3174
+#: src/libslic3r/PrintConfig.cpp:3080
 msgid "Accuracy"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3176
+#: src/libslic3r/PrintConfig.cpp:3082
 msgid ""
 "Performance vs accuracy of calculation. Lower values may produce unwanted "
 "artifacts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3186
+#: src/libslic3r/PrintConfig.cpp:3092
 msgid ""
 "Hollowing is done in two steps: first, an imaginary interior is calculated "
 "deeper (offset plus the closing distance) in the object and then it's "
@@ -11361,270 +10950,266 @@ msgid ""
 "most."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3602
+#: src/libslic3r/PrintConfig.cpp:3505
 msgid "Export OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3603
+#: src/libslic3r/PrintConfig.cpp:3506
 msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3614
+#: src/libslic3r/PrintConfig.cpp:3517
 msgid "Export SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3615
+#: src/libslic3r/PrintConfig.cpp:3518
 msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3620
+#: src/libslic3r/PrintConfig.cpp:3523
 msgid "Export 3MF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3621
+#: src/libslic3r/PrintConfig.cpp:3524
 msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3625
+#: src/libslic3r/PrintConfig.cpp:3528
 msgid "Export AMF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3626
+#: src/libslic3r/PrintConfig.cpp:3529
 msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3630
+#: src/libslic3r/PrintConfig.cpp:3533
 msgid "Export STL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3631
+#: src/libslic3r/PrintConfig.cpp:3534
 msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3636
+#: src/libslic3r/PrintConfig.cpp:3539
 msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3641
+#: src/libslic3r/PrintConfig.cpp:3544
 msgid "G-code viewer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3642
+#: src/libslic3r/PrintConfig.cpp:3545
 msgid "Visualize an already sliced and saved G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3647
+#: src/libslic3r/PrintConfig.cpp:3550
 msgid "Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3648
+#: src/libslic3r/PrintConfig.cpp:3551
 msgid ""
 "Slice the model as FFF or SLA based on the printer_technology configuration "
 "value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3653
+#: src/libslic3r/PrintConfig.cpp:3556
 msgid "Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3654
+#: src/libslic3r/PrintConfig.cpp:3557
 msgid "Show this help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3659
+#: src/libslic3r/PrintConfig.cpp:3562
 msgid "Help (FFF options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3660
+#: src/libslic3r/PrintConfig.cpp:3563
 msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3664
+#: src/libslic3r/PrintConfig.cpp:3567
 msgid "Help (SLA options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3665
+#: src/libslic3r/PrintConfig.cpp:3568
 msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3669
+#: src/libslic3r/PrintConfig.cpp:3572
 msgid "Output Model Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3670
+#: src/libslic3r/PrintConfig.cpp:3573
 msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3674
+#: src/libslic3r/PrintConfig.cpp:3577
 msgid "Save config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3675
+#: src/libslic3r/PrintConfig.cpp:3578
 msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3685
+#: src/libslic3r/PrintConfig.cpp:3588
 msgid "Align XY"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3686
+#: src/libslic3r/PrintConfig.cpp:3589
 msgid "Align the model to the given point."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3691
+#: src/libslic3r/PrintConfig.cpp:3594
 msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3712
+#: src/libslic3r/PrintConfig.cpp:3615
 msgid "Center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3713
+#: src/libslic3r/PrintConfig.cpp:3616
 msgid "Center the print around the given center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3717
+#: src/libslic3r/PrintConfig.cpp:3620
 msgid "Don't arrange"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3718
+#: src/libslic3r/PrintConfig.cpp:3621
 msgid ""
 "Do not rearrange the given models before merging and keep their original XY "
 "coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3721
+#: src/libslic3r/PrintConfig.cpp:3624
 msgid "Duplicate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3722
+#: src/libslic3r/PrintConfig.cpp:3625
 msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3726
+#: src/libslic3r/PrintConfig.cpp:3629
 msgid "Duplicate by grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3727
+#: src/libslic3r/PrintConfig.cpp:3630
 msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3731
+#: src/libslic3r/PrintConfig.cpp:3634
 msgid ""
 "Arrange the supplied models in a plate and merge them in a single model in "
 "order to perform actions once."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3736
+#: src/libslic3r/PrintConfig.cpp:3639
 msgid ""
 "Try to repair any non-manifold meshes (this option is implicitly added "
 "whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3740
+#: src/libslic3r/PrintConfig.cpp:3643
 msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3744
+#: src/libslic3r/PrintConfig.cpp:3647
 msgid "Rotate around X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3745
+#: src/libslic3r/PrintConfig.cpp:3648
 msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3749
+#: src/libslic3r/PrintConfig.cpp:3652
 msgid "Rotate around Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3750
+#: src/libslic3r/PrintConfig.cpp:3653
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3755
+#: src/libslic3r/PrintConfig.cpp:3658
 msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3760
+#: src/libslic3r/PrintConfig.cpp:3663
 msgid ""
 "Detect unconnected parts in the given model(s) and split them into separate "
 "objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3763
+#: src/libslic3r/PrintConfig.cpp:3666
 msgid "Scale to Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3764
+#: src/libslic3r/PrintConfig.cpp:3667
 msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3773
+#: src/libslic3r/PrintConfig.cpp:3676
 msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3774
+#: src/libslic3r/PrintConfig.cpp:3677
 msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3777
+#: src/libslic3r/PrintConfig.cpp:3680
 msgid "Load config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3778
+#: src/libslic3r/PrintConfig.cpp:3681
 msgid ""
 "Load configuration from the specified file. It can be used more than once to "
 "load options from multiple files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3781
+#: src/libslic3r/PrintConfig.cpp:3684
 msgid "Output File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3782
+#: src/libslic3r/PrintConfig.cpp:3685
 msgid ""
 "The file where the output will be written (if not specified, it will be "
 "based on the input file)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3786
-msgid "Single instance mode"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3787
+#: src/libslic3r/PrintConfig.cpp:3690
 msgid ""
 "If enabled, the command line arguments are sent to an existing instance of "
 "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
 "the \"single_instance\" configuration value from application preferences."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3798
+#: src/libslic3r/PrintConfig.cpp:3701
 msgid "Data directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3799
+#: src/libslic3r/PrintConfig.cpp:3702
 msgid ""
 "Load and store settings at the given directory. This is useful for "
 "maintaining different profiles or including configurations from a network "
 "storage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3802
+#: src/libslic3r/PrintConfig.cpp:3705
 msgid "Logging level"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3803
+#: src/libslic3r/PrintConfig.cpp:3706
 msgid ""
 "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
 "trace\n"
 "For example. loglevel=2 logs fatal, error and warning level messages."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3809
+#: src/libslic3r/PrintConfig.cpp:3712
 msgid "Render with a software renderer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3810
+#: src/libslic3r/PrintConfig.cpp:3713
 msgid ""
 "Render with a software renderer. The bundled MESA software renderer is "
 "loaded instead of the default OpenGL driver."
@@ -11634,18 +11219,18 @@ msgstr ""
 msgid "Error with zip archive"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:112
+#: src/libslic3r/PrintObject.cpp:114
 msgid "Processing triangulated mesh"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:157
+#: src/libslic3r/PrintObject.cpp:158
 msgid "Generating perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:260
+#: src/libslic3r/PrintObject.cpp:261
 msgid "Preparing infill"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:421
+#: src/libslic3r/PrintObject.cpp:422
 msgid "Generating support material"
 msgstr ""
diff --git a/resources/localization/README.md b/resources/localization/README.md
index 945118d8984..eb57ce3367e 100644
--- a/resources/localization/README.md
+++ b/resources/localization/README.md
@@ -28,7 +28,7 @@ output = es/SuperSlicer.po
 It will tell you if you made some mistakes about the paths, the number of translations reused and the number to do.
 
 ## 3) complete the translation file
-Then, you have to open the es/toto.po file and complete all the translation. 
+Then, you have to open the es/todo.po file and complete all the translation. 
 * msgid lines are the english string
 * msgstr is the translated one, should be empty string ("").
 
@@ -54,4 +54,4 @@ output = es/SuperSlicer.po
 
 And re-launch the utility.
 
-Repeat (if needed) until you have almost nothing left in your todo.po file (one-letter translation like "." are not copied by the utility)
\ No newline at end of file
+Repeat (if needed) until you have almost nothing left in your todo.po file (one-letter translation like "." are not copied by the utility)
diff --git a/resources/localization/Slic3r++.pot b/resources/localization/Slic3r++.pot
new file mode 100644
index 00000000000..5e45abe58df
--- /dev/null
+++ b/resources/localization/Slic3r++.pot
@@ -0,0 +1,6377 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr "Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-01-17 13:39+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/slic3r/GUI/AboutDialog.cpp:33
+msgid "About Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:68 src/slic3r/GUI/MainFrame.cpp:51
+msgid "Version"
+msgstr "גרסה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:43
+msgid "Shape"
+msgstr "צורה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:50
+msgid "Rectangular"
+msgstr "מלבני"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:54
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:207 src/slic3r/GUI/Plater.cpp:125
+#: src/slic3r/GUI/Tab.cpp:2122
+msgid "Size"
+msgstr "גודל"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:55
+msgid "Size in X and Y of the rectangular plate."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:61
+msgid "Origin"
+msgstr "מוצא"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:62
+msgid ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:66
+msgid "Circular"
+msgstr "מעוגל"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:69 src/slic3r/GUI/ConfigWizard.cpp:92
+#: src/slic3r/GUI/ConfigWizard.cpp:456 src/slic3r/GUI/ConfigWizard.cpp:470
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
+#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:80
+#: src/libslic3r/PrintConfig.cpp:50 src/libslic3r/PrintConfig.cpp:58
+#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:254
+#: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:315
+#: src/libslic3r/PrintConfig.cpp:326 src/libslic3r/PrintConfig.cpp:448
+#: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:480
+#: src/libslic3r/PrintConfig.cpp:679 src/libslic3r/PrintConfig.cpp:1178
+#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1263
+#: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1365
+#: src/libslic3r/PrintConfig.cpp:1376 src/libslic3r/PrintConfig.cpp:1499
+#: src/libslic3r/PrintConfig.cpp:1508 src/libslic3r/PrintConfig.cpp:1554
+#: src/libslic3r/PrintConfig.cpp:1563 src/libslic3r/PrintConfig.cpp:1574
+#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1592
+#: src/libslic3r/PrintConfig.cpp:1682 src/libslic3r/PrintConfig.cpp:1918
+#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2031
+#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2249
+#: src/libslic3r/PrintConfig.cpp:2257 src/libslic3r/PrintConfig.cpp:2291
+#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2313
+#: src/libslic3r/PrintConfig.cpp:2321 src/libslic3r/PrintConfig.cpp:2328
+#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2497
+#: src/libslic3r/PrintConfig.cpp:2506 src/libslic3r/PrintConfig.cpp:2515
+#: src/libslic3r/PrintConfig.cpp:2524 src/libslic3r/PrintConfig.cpp:2560
+#: src/libslic3r/PrintConfig.cpp:2569 src/libslic3r/PrintConfig.cpp:2587
+#: src/libslic3r/PrintConfig.cpp:2596 src/libslic3r/PrintConfig.cpp:2623
+#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2648
+#: src/libslic3r/PrintConfig.cpp:2657 src/libslic3r/PrintConfig.cpp:2666
+msgid "mm"
+msgstr "מ\"מ"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/libslic3r/PrintConfig.cpp:676
+msgid "Diameter"
+msgstr "קוטר"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:71
+msgid ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+msgstr "קוטר מיטת ההדפסה. ההנחה היא שמוצא (0,0) נמצא במרכז."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:75 src/slic3r/GUI/GUI_Preview.cpp:265
+#: src/libslic3r/GCode/PreviewData.cpp:175
+msgid "Custom"
+msgstr "מותאים אישית"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:79
+msgid "Load shape from STL..."
+msgstr "טען צורה מ- STL ..."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:125
+msgid "Settings"
+msgstr "הגדרות"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:298
+msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:315 src/slic3r/GUI/GUI_ObjectList.cpp:835
+msgid "Error! "
+msgstr "שגיאה! "
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:324
+msgid "The selected file contains no geometry."
+msgstr "הקובץ הנבחר אינו מכיל גיאומטריה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:328
+msgid ""
+"The selected file contains several disjoint areas. This is not supported."
+msgstr "הקובץ שנבחר מכיל כמה אזורים נפרדים. זה לא נתמך."
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:419
+msgid "Bed Shape"
+msgstr "צורת מיטה"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:54
+msgid "Network lookup"
+msgstr "חיפוש ברשת"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:67
+msgid "Address"
+msgstr "כתובת"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:68
+msgid "Hostname"
+msgstr "שם מארח"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:69
+msgid "Service name"
+msgstr "שם השירות"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:70
+msgid "OctoPrint version"
+msgstr "גרסת OctoPrint"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:188
+msgid "Searching for devices"
+msgstr "מחפש מכשירים"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:195
+msgid "Finished"
+msgstr "הסתיים"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:15
+msgid "Buttons And Text Colors Description"
+msgstr "כפתורים וצבעי טקסט תיאור"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:40
+msgid "Value is the same as the system value"
+msgstr "הערך זהה לערך המערכת"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:57
+msgid ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+msgstr "הערך השתנה ואינו שווה לערך המערכת או להגדרה המוגדרת מראש שנשמרה"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:16
+msgid "Upgrade"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
+msgid "Downgrade"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
+msgid "Before roll back"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
+msgid "User"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
+msgid "Unknown"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:37
+msgid "Active: "
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
+msgid "slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 src/slic3r/GUI/Preset.cpp:1156
+msgid "print"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
+msgid "filaments"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1160
+msgid "printer"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 src/slic3r/GUI/Tab.cpp:838
+msgid "vendor"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
+msgid "version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
+msgid "min slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
+msgid "max slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+msgid "model"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+msgid "variants"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+msgid "Incompatible with this Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "Activate"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:97
+msgid "Configuration Snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:92
+msgid "nozzle"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:93
+msgid "default"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:116
+msgid "Select all"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:117
+msgid "Select none"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:226
+#, possible-c-format
+msgid "Welcome to the Slic3r %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:226
+msgid "Welcome"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:232 src/slic3r/GUI/GUI_App.cpp:606
+#, possible-c-format
+msgid "Run %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:234
+#, possible-c-format
+msgid ""
+"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
+"configuration; just a few settings and you will be ready to print."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:238
+msgid ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:263
+msgid "Other vendors"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:265
+msgid "Custom setup"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:289
+msgid "Automatic updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:289
+msgid "Updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:297 src/slic3r/GUI/Preferences.cpp:59
+msgid "Check for application updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:300 src/slic3r/GUI/Preferences.cpp:61
+msgid ""
+"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
+"version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/Preferences.cpp:67
+msgid "Update built-in Presets automatically"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:307 src/slic3r/GUI/Preferences.cpp:69
+msgid ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:308
+msgid ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:313
+msgid ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:320
+msgid "Other Vendors"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:322
+msgid "Pick another vendor supported by Slic3r PE:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:381
+msgid "Firmware Type"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:381 src/slic3r/GUI/Tab.cpp:1820
+msgid "Firmware"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:385
+msgid "Choose the type of firmware used by your printer."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:419
+msgid "Bed Shape and Size"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:422
+msgid "Set the shape of your printer's bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:436
+msgid "Filament and Nozzle Diameters"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:436
+msgid "Print Diameters"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:452
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:455
+msgid "Nozzle Diameter:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:465
+msgid "Enter the diameter of your filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:466
+msgid ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:469
+msgid "Filament Diameter:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:487
+msgid "Extruder and Bed Temperatures"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:487
+msgid "Temperatures"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:503
+msgid "Enter the temperature needed for extruding your filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:504
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:507
+msgid "Extrusion Temperature:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:508 src/slic3r/GUI/ConfigWizard.cpp:522
+msgid "°C"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:517
+msgid ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:518
+msgid ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:521
+msgid "Bed Temperature:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:833
+msgid "< &Back"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:834
+msgid "&Next >"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:835
+msgid "&Finish"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:906
+msgid "Configuration Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:907
+msgid "Configuration &Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:909
+msgid "Configuration Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:910
+msgid "Configuration &Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:109
+msgid "default value"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:112
+msgid "parameter name"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:140
+#, possible-c-format
+msgid "%s doesn't support percentage"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:148 src/slic3r/GUI/Field.cpp:168
+msgid ""
+"Input value contains incorrect symbol(s).\n"
+"Use, please, only digits"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:153
+msgid "Input value is out of range"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:176
+#, possible-c-format
+msgid ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:179
+msgid "Parameter validation"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:133
+msgid "Flash!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:134 src/slic3r/GUI/GLGizmo.cpp:2270
+msgid "Cancel"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:135
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:245
+msgid "Flashing succeeded!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:246
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:247
+msgid "Flashing cancelled."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:279
+#, possible-c-format
+msgid "Flashing failed: %s"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:293
+#, possible-c-format
+msgid ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:380 src/slic3r/GUI/FirmwareDialog.cpp:414
+msgid ""
+"Multiple Original Prusa i3 MMU 2.0 devices found. Please only connect one at "
+"a time for flashing."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:508
+msgid "The device could not have been found"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:581
+#, possible-c-format
+msgid "Error accessing port at %s: %s"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:690
+msgid "Firmware flasher"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:712
+msgid "Firmware image:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:716
+msgid "Serial port:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:718
+msgid "Autodetected"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:719
+msgid "Rescan"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:726
+msgid "Progress:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:729
+msgid "Status:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:730
+msgid "Ready"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:750
+msgid "Advanced: avrdude output log"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:809
+msgid ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:810
+msgid "Confirmation"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:813
+msgid "Cancelling..."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4640
+msgid "Detected object outside print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:7962
+msgid "Detected toolpath outside print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:751 src/slic3r/GUI/GUI_ObjectManipulation.cpp:300
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:322
+#: src/libslic3r/PrintConfig.cpp:3087
+msgid "Rotate"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:785
+msgid "Rotation (deg)"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:841 src/slic3r/GUI/GUI_ObjectManipulation.cpp:206
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:301
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:323
+#: src/libslic3r/PrintConfig.cpp:3111
+msgid "Scale"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:1072
+msgid "Scale (%)"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:1200
+msgid "Move"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:1326
+msgid "Position (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:1326
+msgid "Displacement (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:1430
+msgid "Place on face"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2207
+msgid "Left mouse click - add point"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2208
+msgid "Right mouse click - remove point"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2211
+msgid "Generate points automatically"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2212
+msgid "Remove all points"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2245
+msgid "SLA Support Points"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2268 src/slic3r/GUI/GLGizmo.cpp:2468
+msgid "Rotate lower part upwards"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2269 src/slic3r/GUI/GLGizmo.cpp:2470
+msgid "Perform cut"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2276
+msgid "Cut object:"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2356 src/slic3r/GUI/GLGizmo.cpp:2461
+#: src/libslic3r/PrintConfig.cpp:3016
+msgid "Cut"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2466
+msgid "Keep upper part"
+msgstr ""
+
+#: src/slic3r/GUI/GLGizmo.cpp:2467
+msgid "Keep lower part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:242
+msgid "Notice"
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:248
+msgid "Attempt to free unreferenced scalar"
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:250 src/slic3r/GUI/WipeTowerDialog.cpp:40
+#: src/slic3r/GUI/WipeTowerDialog.cpp:322
+msgid "Warning"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:377
+msgid "Choose one file (3MF):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:389
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:451
+msgid "Array of language names and identifiers should have the same size."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:461
+msgid "Select the language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:461
+msgid "Language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:529 src/libslic3r/PrintConfig.cpp:270
+msgid "Default"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:609
+msgid "&Configuration Snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:609
+msgid "Inspect / activate configuration snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:610
+msgid "Take Configuration &Snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:610
+msgid "Capture a configuration snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:613
+msgid "&Preferences"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:613
+msgid "Application preferences"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:616
+msgid "Simple"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:616
+msgid "Simple View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:39
+#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:962
+#: src/slic3r/GUI/Tab.cpp:1058 src/slic3r/GUI/Tab.cpp:1061
+#: src/slic3r/GUI/Tab.cpp:1425 src/slic3r/GUI/Tab.cpp:1840
+#: src/libslic3r/PrintConfig.cpp:156 src/libslic3r/PrintConfig.cpp:323
+#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:2298
+msgid "Advanced"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:617
+msgid "Advanced View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:618
+msgid "Expert"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:618
+msgid "Expert View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:620
+msgid "Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:620
+msgid "Slic3r View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:622
+msgid "Change Application &Language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:624
+msgid "Flash printer &firmware"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:624
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:636
+msgid "Taking configuration snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:636
+msgid "Snapshot name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:674
+msgid "Application will be restarted"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:674 src/slic3r/GUI/Tab.cpp:2606
+msgid "Attention!"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:691
+msgid "&Configuration"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid "You have unsaved changes "
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid ". Discard changes and continue anyway?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:712
+msgid "Unsaved Presets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:31 src/libslic3r/PrintConfig.cpp:47
+#: src/libslic3r/PrintConfig.cpp:115 src/libslic3r/PrintConfig.cpp:357
+#: src/libslic3r/PrintConfig.cpp:410 src/libslic3r/PrintConfig.cpp:419
+#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:1037
+#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1426
+#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2091
+#: src/libslic3r/PrintConfig.cpp:2150
+msgid "Layers and Perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:32 src/slic3r/GUI/Tab.cpp:952
+#: src/slic3r/GUI/Tab.cpp:953 src/slic3r/GUI/Tab.cpp:1274
+#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:366
+#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:745
+#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:938
+#: src/libslic3r/PrintConfig.cpp:949 src/libslic3r/PrintConfig.cpp:969
+#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:1010
+#: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1752
+msgid "Infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_Preview.cpp:262
+#: src/slic3r/GUI/Tab.cpp:980 src/slic3r/GUI/Tab.cpp:981
+#: src/libslic3r/PrintConfig.cpp:305 src/libslic3r/PrintConfig.cpp:1484
+#: src/libslic3r/PrintConfig.cpp:1865 src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1894
+#: src/libslic3r/PrintConfig.cpp:1905 src/libslic3r/PrintConfig.cpp:1914
+#: src/libslic3r/PrintConfig.cpp:1930 src/libslic3r/PrintConfig.cpp:1953
+#: src/libslic3r/PrintConfig.cpp:1965 src/libslic3r/PrintConfig.cpp:1983
+#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2003
+#: src/libslic3r/PrintConfig.cpp:2014 src/libslic3r/PrintConfig.cpp:2029
+#: src/libslic3r/PrintConfig.cpp:2038 src/libslic3r/PrintConfig.cpp:2039
+#: src/libslic3r/PrintConfig.cpp:2048 src/libslic3r/PrintConfig.cpp:2057
+#: src/libslic3r/PrintConfig.cpp:2072 src/libslic3r/GCode/PreviewData.cpp:172
+msgid "Support material"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_Preview.cpp:241
+#: src/slic3r/GUI/Tab.cpp:1005 src/libslic3r/PrintConfig.cpp:169
+#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:881
+#: src/libslic3r/PrintConfig.cpp:1011 src/libslic3r/PrintConfig.cpp:1416
+#: src/libslic3r/PrintConfig.cpp:1668 src/libslic3r/PrintConfig.cpp:1721
+#: src/libslic3r/PrintConfig.cpp:1776 src/libslic3r/PrintConfig.cpp:2136
+msgid "Speed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/Tab.cpp:1038
+#: src/slic3r/GUI/Tab.cpp:1744 src/libslic3r/PrintConfig.cpp:430
+#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1393
+#: src/libslic3r/PrintConfig.cpp:1743 src/libslic3r/PrintConfig.cpp:1944
+#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:2271
+#: src/libslic3r/PrintConfig.cpp:2280
+msgid "Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/libslic3r/PrintConfig.cpp:387
+#: src/libslic3r/PrintConfig.cpp:504 src/libslic3r/PrintConfig.cpp:836
+#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1403
+#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1954
+#: src/libslic3r/PrintConfig.cpp:2124
+msgid "Extrusion Width"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:41 src/slic3r/GUI/Tab.cpp:3179
+#: src/slic3r/GUI/Tab.cpp:3180 src/libslic3r/PrintConfig.cpp:2488
+#: src/libslic3r/PrintConfig.cpp:2495 src/libslic3r/PrintConfig.cpp:2504
+#: src/libslic3r/PrintConfig.cpp:2513 src/libslic3r/PrintConfig.cpp:2522
+#: src/libslic3r/PrintConfig.cpp:2547 src/libslic3r/PrintConfig.cpp:2558
+#: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2576
+#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
+#: src/libslic3r/PrintConfig.cpp:2603 src/libslic3r/PrintConfig.cpp:2612
+#: src/libslic3r/PrintConfig.cpp:2621
+msgid "Supports"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:42 src/slic3r/GUI/Tab.cpp:3205
+#: src/slic3r/GUI/Tab.cpp:3206 src/libslic3r/PrintConfig.cpp:2630
+#: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2646
+#: src/libslic3r/PrintConfig.cpp:2655 src/libslic3r/PrintConfig.cpp:2664
+msgid "Pad"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:115
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:129
+msgid "Name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:134
+msgid "Right button click the icon to change the object settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:142
+#, possible-c-format
+msgid "Auto-repaired (%d errors):\n"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:145
+msgid "degenerate facets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:146
+msgid "edges fixed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:147
+msgid "facets removed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:148
+msgid "facets added"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:149
+msgid "facets reversed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:150
+msgid "backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:164
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:196 src/slic3r/GUI/Tab.cpp:1389
+#: src/libslic3r/PrintConfig.cpp:429
+msgid "Extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:615
+msgid "Select showing settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:655
+msgid "Load"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659 src/slic3r/GUI/GUI_ObjectList.cpp:688
+#: src/slic3r/GUI/GUI_ObjectList.cpp:691
+msgid "Box"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Cylinder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Sphere"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Slab"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:671 src/slic3r/GUI/GUI_ObjectList.cpp:685
+msgid "Add part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:672
+msgid "Add modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:673 src/slic3r/GUI/GUI_ObjectList.cpp:687
+msgid "Add support enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:674 src/slic3r/GUI/GUI_ObjectList.cpp:690
+msgid "Add support blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:711
+msgid "Split to parts"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:725
+msgid "Add settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:739
+msgid "Change type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1009
+msgid "You can't delete the last solid part from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1017
+msgid "You can't delete the last intance from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1044 src/slic3r/GUI/Plater.cpp:1825
+msgid ""
+"The selected object couldn't be split because it contains only one part."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1138
+msgid "Group manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1149
+msgid "Object manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1159
+msgid "Object Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1163
+msgid "Part Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1173
+msgid "Part manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
+msgid "Instance manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
+msgid "You can't change a type of the last solid part of the object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1662
+msgid "Select type of part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1744 src/slic3r/GUI/Tab.cpp:3070
+#: src/slic3r/GUI/Tab.cpp:3074
+msgid "The supplied name is not valid;"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1745 src/slic3r/GUI/Tab.cpp:3071
+msgid "the following characters are not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:21
+msgid "Object Manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:132
+msgid "Object name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
+msgid "Position"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:205
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:253
+msgid "Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:254
+msgid "Scale factors"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:321
+msgid "Translate"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:235
+msgid "View"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/GUI_Preview.cpp:550
+#: src/libslic3r/GCode/PreviewData.cpp:394
+msgid "Feature type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:443
+msgid "Height"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/PrintConfig.cpp:2255
+msgid "Width"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:242
+msgid "Volumetric flow rate"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:243 src/slic3r/GUI/GUI_Preview.cpp:347
+#: src/slic3r/GUI/GUI_Preview.cpp:496 src/slic3r/GUI/GUI_Preview.cpp:718
+#: src/libslic3r/GCode/PreviewData.cpp:404
+msgid "Tool"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:244 src/slic3r/GUI/GUI_Preview.cpp:550
+#: src/libslic3r/GCode/PreviewData.cpp:406
+msgid "Color Print"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:247
+msgid "Show"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/GUI_Preview.cpp:251
+msgid "Feature types"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/GCode/PreviewData.cpp:163
+msgid "Perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254 src/libslic3r/GCode/PreviewData.cpp:164
+msgid "External perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255 src/libslic3r/GCode/PreviewData.cpp:165
+msgid "Overhang perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256 src/libslic3r/GCode/PreviewData.cpp:166
+msgid "Internal infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:257 src/libslic3r/PrintConfig.cpp:1764
+#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/GCode/PreviewData.cpp:167
+msgid "Solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258 src/libslic3r/PrintConfig.cpp:2123
+#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/GCode/PreviewData.cpp:168
+msgid "Top solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:259 src/libslic3r/GCode/PreviewData.cpp:169
+msgid "Bridge infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/libslic3r/PrintConfig.cpp:880
+#: src/libslic3r/GCode/PreviewData.cpp:170
+msgid "Gap fill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:261 src/slic3r/GUI/Tab.cpp:971
+#: src/libslic3r/GCode/PreviewData.cpp:171
+msgid "Skirt"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:263 src/libslic3r/PrintConfig.cpp:2002
+#: src/libslic3r/GCode/PreviewData.cpp:173
+msgid "Support material interface"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:264 src/slic3r/GUI/Tab.cpp:1049
+#: src/libslic3r/GCode/PreviewData.cpp:174
+msgid "Wipe tower"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/PrintConfig.cpp:2158
+msgid "Travel"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:270
+msgid "Retractions"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:271
+msgid "Unretractions"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:272
+msgid "Shells"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:12
+msgid "Slic3r Prusa Edition - Keyboard Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:47
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Main Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
+msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+msgid "Load Config from .ini/amf/3mf/gcode"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 src/slic3r/GUI/Plater.cpp:605
+msgid "Export G-code"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Save project (3MF)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
+msgid "Load Config from .ini/amf/3mf/gcode and merge"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
+msgid "(Re)slice"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
+msgid "Quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 src/slic3r/GUI/MainFrame.cpp:289
+msgid "Repeat last quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
+msgid "Select Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "Quick slice and Save as"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
+msgid "Select Print Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+msgid "Select Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Select Printer Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+msgid "Switch to 3D"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
+msgid "Switch to Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117 src/slic3r/GUI/Preferences.cpp:10
+msgid "Preferences"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+#: src/slic3r/GUI/PrintHostDialogs.cpp:89
+msgid "Print host upload queue"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Camera view "
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Add Instance to selected object "
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Remove Instance from selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+msgid "Show keyboard shortcuts list"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
+msgid "Switch between 3D and Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Select multiple object/Move multiple object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+msgid "Arrange"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+msgid "Select All objects"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+msgid "Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Delete All"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+msgid "Gizmo move"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Gizmo scale"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+msgid "Gizmo rotate"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+msgid "Gizmo cut"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+msgid "Gizmo Place face on bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+msgid "Gizmo SLA support points"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+msgid "Zoom to Bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+msgid "Zoom to all objects in scene, if none selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Zoom to selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Zoom in"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Zoom out"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Unselect gizmo, keep object selection"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Plater Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Arrow Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Upper Layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Arrow Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Lower Layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+msgid "Preview Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:53
+msgid ""
+" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:130
+msgid "Plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:236
+msgid "&Open"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:236
+msgid "Open a project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:238
+msgid "&Save"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:238
+msgid "Save current project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:240
+msgid "Save &as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:240
+msgid "Save current project file as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:246
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:246
+msgid "Load a model"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:249
+msgid "Import &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:249
+msgid "Load exported configuration file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:251
+msgid "Import Config from &project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:251
+msgid "Load configuration from project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:254
+msgid "Import Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:254
+msgid "Load presets from a bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:256
+msgid "&Import"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:259
+msgid "Export &G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:259
+msgid "Export current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:262
+msgid "Export plate as &STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:262
+msgid "Export current plate as STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:264
+msgid "Export plate as &AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:264
+msgid "Export current plate as AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:267
+msgid "Export &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:267
+msgid "Export current configuration to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:269
+msgid "Export Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:269
+msgid "Export all presets to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:271
+msgid "&Export"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Slice a file into a G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Quick Slice and Save As"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Slice a file into a G-code, save as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:289
+msgid "Repeat Last Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:297
+msgid "(Re)Slice &Now"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:297
+msgid "Start new slicing process"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:300
+msgid "&Repair STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:300
+msgid "Automatically repair an STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:303
+msgid "&Quit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:303
+msgid "Quit Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:321
+msgid "&Select all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:321
+msgid "Selects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:324
+msgid "&Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:324
+msgid "Deletes the current selection"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:326
+msgid "Delete &all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:326
+msgid "Deletes all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:339
+msgid "&Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:339
+msgid "Show the plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "P&rint Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "Show the print settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "&Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "Show the filament settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:350
+msgid "Print&er Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:350
+msgid "Show the printer settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "3&D"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "Show the 3D editing view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:356
+msgid "Pre&view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:356
+msgid "Show the 3D slices preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "Print &Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "Display the Print Host Upload Queue window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "&Iso"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "Iso View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:390
+msgid "&Top"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:390
+msgid "Top View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:391
+msgid "&Bottom"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:391
+msgid "Bottom View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "&Front"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "Front View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:393
+msgid "R&ear"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:393
+msgid "Rear View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "&Left"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "Left View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:395
+msgid "&Right"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:395
+msgid "Right View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Prusa 3D &Drivers"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Open the Prusa3D drivers download page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "Prusa Edition &Releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "Open the Prusa Edition releases page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:417
+msgid "Slic3r &Website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:417
+msgid "Open the Slic3r website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:419
+msgid "Slic3r &Manual"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:419
+msgid "Open the Slic3r manual in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:422
+msgid "System &Info"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:422
+msgid "Show system information"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:424
+msgid "Show &Configuration Folder"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:424
+msgid "Show user configuration folder (datadir)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:426
+msgid "Report an I&ssue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:426
+msgid "Report an issue on the Slic3r Prusa Edition"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:428
+msgid "&About Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:428
+msgid "Show about dialog"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:431
+msgid "&Keyboard Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:431
+msgid "Show the list of the keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:439
+msgid "&File"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:440
+msgid "&Edit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:441
+msgid "&Window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:442
+msgid "&View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:445
+msgid "&Help"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:472
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:486
+msgid "No previously sliced file."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:487 src/slic3r/GUI/PrintHostDialogs.cpp:173
+msgid "Error"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid "Previously sliced file ("
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid ") not found."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:493
+msgid "File Not Found"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531 src/slic3r/GUI/Tab.cpp:3031
+msgid "Save "
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid "SVG"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid "G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid " file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:548
+msgid "Save zip file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:560
+msgid "Slicing"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:560
+msgid "Processing "
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:583
+msgid " was successfully sliced."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:585
+msgid "Slicing Done!"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:600
+msgid "Select the STL file to repair:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:614
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:629
+msgid "Your file was repaired."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:629
+msgid "Repair"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:643
+msgid "Save configuration as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:663 src/slic3r/GUI/MainFrame.cpp:727
+msgid "Select configuration to load:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:700
+msgid "Save presets bundle as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:751
+#, possible-c-format
+msgid "%d presets successfully imported."
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:66
+msgid "Slic3r error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:66
+msgid "Slic3r has encountered an error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:84
+msgid "Copy to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:107
+msgid "Info"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:126
+msgid "Volume"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:127
+msgid "Facets"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:128
+msgid "Materials"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:131
+msgid "Manifold"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:174
+msgid "Sliced Info"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:193 src/slic3r/GUI/Plater.cpp:823
+msgid "Used Filament (m)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:194
+msgid "Used Filament (mm³)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:195
+msgid "Used Filament (g)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:196 src/slic3r/GUI/Plater.cpp:838
+#: src/libslic3r/PrintConfig.cpp:718
+msgid "Cost"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:197 src/slic3r/GUI/Plater.cpp:852
+msgid "Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:198
+msgid "Number of tool changes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:361
+msgid "Support"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:364
+msgid "Select what kind of support do you need"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:365 src/libslic3r/GCode/PreviewData.cpp:162
+msgid "None"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:366 src/libslic3r/PrintConfig.cpp:1904
+msgid "Support on build plate only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:367
+msgid "Everywhere"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:379 src/slic3r/GUI/Tab.cpp:977
+msgid "Brim"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:381
+msgid ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:390
+msgid "Purging volumes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:556
+msgid "Print settings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:557 src/slic3r/GUI/Tab.cpp:1380
+#: src/slic3r/GUI/Tab.cpp:1381
+msgid "Filament"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:558 src/slic3r/GUI/Preset.cpp:1158
+msgid "SLA print"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:559 src/slic3r/GUI/Preset.cpp:1159
+msgid "SLA material"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:560
+msgid "Printer"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:588
+msgid "Send to printer"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:607
+msgid "Slice now"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:787
+#, possible-c-format
+msgid "%d (%d shells)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:792
+#, possible-c-format
+msgid "Auto-repaired (%d errors)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:795
+#, possible-c-format
+msgid ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:805
+msgid "Yes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
+msgid "objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
+msgid "wipe tower"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:855
+msgid "normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:859
+msgid "silent mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1304
+msgid "Loading"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1314
+#, possible-c-format
+msgid "Processing input file %s\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1366
+msgid ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1369 src/slic3r/GUI/Plater.cpp:1411
+msgid "Multi-part object detected"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1388
+#, possible-c-format
+msgid ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1408
+msgid ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1424
+msgid "Loaded"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1492
+msgid ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1493
+msgid "Object too large?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1536
+msgid "Export print config"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1538
+msgid "Save file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1702
+msgid "Arranging canceled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1705
+msgid "Arranging"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1736
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1740
+msgid "Arranging done."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1782
+msgid "Orientation search canceled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1787
+msgid "Searching for optimal orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1797
+msgid "Orientation found."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1818
+msgid ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1945 src/slic3r/GUI/PrintHostDialogs.cpp:174
+msgid "Cancelling"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1962
+msgid "Another export job is currently running."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2215
+msgid "Export failed"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2219 src/slic3r/GUI/PrintHostDialogs.cpp:175
+msgid "Cancelled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2346 src/slic3r/GUI/Tab.cpp:2736
+msgid "Delete"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2346
+msgid "Remove the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2349
+msgid "Increase copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2349
+msgid "Place one more copy of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2351
+msgid "Decrease copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2351
+msgid "Remove one copy of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2353
+msgid "Set number of copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2353
+msgid "Change the number of copies of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2363
+msgid "Reload from Disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2363
+msgid "Reload the selected file from Disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2366
+msgid "Export object as STL"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2366
+msgid "Export this single object as STL file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2375
+msgid "Along X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2375
+msgid "Mirror the selected object along the X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2377
+msgid "Along Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2377
+msgid "Mirror the selected object along the Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2379
+msgid "Along Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2379
+msgid "Mirror the selected object along the Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2382
+msgid "Mirror"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2382
+msgid "Mirror the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2400
+msgid "To objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2400 src/slic3r/GUI/Plater.cpp:2431
+msgid "Split the selected object into individual objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2402
+msgid "To parts"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2402 src/slic3r/GUI/Plater.cpp:2451
+msgid "Split the selected object into individual sub-parts"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2405 src/slic3r/GUI/Plater.cpp:2431
+#: src/slic3r/GUI/Plater.cpp:2451
+msgid "Split"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2405
+msgid "Split the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2435
+msgid "Optimize orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2435
+msgid "Optimize the rotation of the object for better print results."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2795
+msgid "Save G-code file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2795
+msgid "Save Zip file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2845
+#, possible-c-format
+msgid "STL file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2861
+#, possible-c-format
+msgid "AMF file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2864
+#, possible-c-format
+msgid "Error exporting AMF file %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2891
+#, possible-c-format
+msgid "3MF file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2894
+#, possible-c-format
+msgid "Error exporting 3MF file %s"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1712
+#: src/slic3r/GUI/Tab.cpp:1911
+msgid "General"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:34
+msgid "Remember output directory"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:36
+msgid ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:42
+msgid "Auto-center parts"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:44
+msgid ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:50
+msgid "Background processing"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:52
+msgid ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:74
+msgid "Suppress \" - default - \" presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:76
+msgid ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:82
+msgid "Show incompatible print and filament presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:84
+msgid ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:90
+msgid "Use legacy OpenGL 1.1 rendering"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:92
+msgid ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:115
+msgid "You need to restart Slic3r to make the changes effective."
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:170
+msgid "modified"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:862 src/slic3r/GUI/Preset.cpp:902
+#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:962
+#: src/slic3r/GUI/PresetBundle.cpp:1459 src/slic3r/GUI/PresetBundle.cpp:1512
+msgid "System presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:906 src/slic3r/GUI/Preset.cpp:966
+#: src/slic3r/GUI/PresetBundle.cpp:1517
+msgid "User presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:1157
+msgid "filament"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:28
+#, possible-c-format
+msgid ""
+"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
+"will be reduced so that no less than %ds are spent on that layer (however, "
+"speed will never be reduced below %dmm/s)."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:32
+#, possible-c-format
+msgid ""
+"\n"
+"If estimated layer time is greater, but still below ~%ds, fan will run at a "
+"proportionally decreasing speed between %d%% and %d%%."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:36
+msgid ""
+"\n"
+"During the other layers, fan "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:38
+msgid "Fan "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:43
+#, possible-c-format
+msgid "will always run at %d%% "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:46
+#, possible-c-format
+msgid "except for the first %d layers"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:50
+msgid "except for the first layer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:52
+msgid "will be turned off."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:153
+msgid "external perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:162
+msgid "perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:171
+msgid "infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:181
+msgid "solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:189
+msgid "top solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:200
+msgid "support"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:210
+msgid "support interface"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "First layer volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Bridging volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:217
+msgid " flow rate is maximized "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:220
+msgid "by the print profile maximum"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:221
+msgid "when printing "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:222
+msgid " with a volumetric rate "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:226
+#, possible-c-format
+msgid "%3.2f mm³/s"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:228
+#, possible-c-format
+msgid " at filament speed %3.2f mm/s."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:247
+msgid ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:264
+#, possible-c-format
+msgid "Recommended object thin wall thickness for layer height %.2f and "
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:271
+#, possible-c-format
+msgid "%d lines: %.2lf mm"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:29
+msgid "Send G-Code to printer host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:29
+msgid "Upload to Printer Host with the following filename:"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:31
+msgid "Start printing after upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:33
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:111
+msgid "Cancel selected"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:113
+msgid "Show error message"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:115
+msgid "Close"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:152
+#: src/slic3r/GUI/PrintHostDialogs.cpp:171
+msgid "Enqueued"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:172
+msgid "Uploading"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
+msgid "Completed"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:214
+msgid "Error uploading to print host:"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
+#: src/slic3r/GUI/WipeTowerDialog.cpp:78 src/libslic3r/PrintConfig.cpp:603
+#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:670
+#: src/libslic3r/PrintConfig.cpp:2352 src/libslic3r/PrintConfig.cpp:2360
+#: src/libslic3r/PrintConfig.cpp:2432 src/libslic3r/PrintConfig.cpp:2440
+msgid "s"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:40
+msgid "Slic3r Prusa Edition - System Information"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:49 src/libslic3r/PrintConfig.cpp:202
+msgid "Compatible printers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:50
+msgid "Select the printers this profile is compatible with."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:55 src/libslic3r/PrintConfig.cpp:215
+msgid "Compatible print profiles"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:56
+msgid "Select the print profiles this profile is compatible with."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:118
+msgid "Save current "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:119
+msgid "Delete this preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:131
+msgid ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:824
+msgid "It's a default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:825
+msgid "It's a system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:826
+msgid "Current preset is inherited from "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:831
+msgid "It can't be deleted or modified. "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:832
+msgid ""
+"Any modifications should be saved as a new preset inherited from this one. "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:833
+msgid "To do that please specify a new name for the preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:837
+msgid "Additional information:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:843
+msgid "printer model"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:851
+msgid "default print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:854
+msgid "default filament profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:868
+msgid "default SLA material profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:872
+msgid "default SLA print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:919 src/slic3r/GUI/Tab.cpp:3174
+msgid "Layers and perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:920 src/libslic3r/PrintConfig.cpp:46
+msgid "Layer height"
+msgstr "גובה השכבה"
+
+#: src/slic3r/GUI/Tab.cpp:924
+msgid "Vertical shells"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:935
+msgid "Horizontal shells"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:936 src/libslic3r/PrintConfig.cpp:1788
+msgid "Solid layers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:941
+msgid "Quality (slower slicing)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:958
+msgid "Reducing printing time"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:970
+msgid "Skirt and brim"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:987
+msgid "Raft"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:991
+msgid "Options for support material and raft"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1006
+msgid "Speed for print moves"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1018
+msgid "Speed for non-print moves"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1021
+msgid "Modifiers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1024
+msgid "Acceleration control (advanced)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1031
+msgid "Autospeed (advanced)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1037
+msgid "Multiple Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1045
+msgid "Ooze prevention"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1062
+msgid "Extrusion width"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1072
+msgid "Overlap"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1075
+msgid "Flow"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1078
+msgid "Other"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1085 src/slic3r/GUI/Tab.cpp:3213
+msgid "Output options"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1086
+msgid "Sequential printing"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1088
+msgid "Extruder clearance (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1097 src/slic3r/GUI/Tab.cpp:3214
+msgid "Output file"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1103 src/libslic3r/PrintConfig.cpp:1438
+msgid "Post-processing scripts"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1109 src/slic3r/GUI/Tab.cpp:1110
+#: src/slic3r/GUI/Tab.cpp:1483 src/slic3r/GUI/Tab.cpp:1484
+#: src/slic3r/GUI/Tab.cpp:1883 src/slic3r/GUI/Tab.cpp:1884
+#: src/slic3r/GUI/Tab.cpp:1964 src/slic3r/GUI/Tab.cpp:1965
+#: src/slic3r/GUI/Tab.cpp:3119 src/slic3r/GUI/Tab.cpp:3120
+msgid "Notes"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1116 src/slic3r/GUI/Tab.cpp:1491
+#: src/slic3r/GUI/Tab.cpp:1890 src/slic3r/GUI/Tab.cpp:1971
+#: src/slic3r/GUI/Tab.cpp:3127 src/slic3r/GUI/Tab.cpp:3219
+msgid "Dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1117 src/slic3r/GUI/Tab.cpp:1492
+#: src/slic3r/GUI/Tab.cpp:1891 src/slic3r/GUI/Tab.cpp:1972
+#: src/slic3r/GUI/Tab.cpp:3128 src/slic3r/GUI/Tab.cpp:3220
+msgid "Profile dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1161
+#, no-c-format
+msgid ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1168
+msgid "Spiral Vase"
+msgstr "אגרטל ספירלי"
+
+#: src/slic3r/GUI/Tab.cpp:1191
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1195 src/slic3r/GUI/Tab.cpp:1212
+msgid "Wipe Tower"
+msgstr "מגדל ניגוב"
+
+#: src/slic3r/GUI/Tab.cpp:1209
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1227
+msgid ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1230
+msgid "Support Generator"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1272
+msgid "The "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1272
+#, no-c-format
+msgid ""
+" infill pattern is not supposed to work at 100% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1388
+msgid "Temperature "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1394
+msgid "Bed"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1399
+msgid "Cooling"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1400 src/libslic3r/PrintConfig.cpp:1333
+#: src/libslic3r/PrintConfig.cpp:2212
+msgid "Enable"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1411
+msgid "Fan settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1412
+msgid "Fan speed"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1420
+msgid "Cooling thresholds"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1426
+msgid "Filament properties"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1430
+msgid "Print speed override"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1440
+msgid "Toolchange parameters with single extruder MM printers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1455
+msgid "Ramming settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1470 src/slic3r/GUI/Tab.cpp:1846
+msgid "Custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1471 src/slic3r/GUI/Tab.cpp:1847
+#: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:1833
+msgid "Start G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1477 src/slic3r/GUI/Tab.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:333 src/libslic3r/PrintConfig.cpp:344
+msgid "End G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1588 src/slic3r/GUI/Tab.cpp:1642
+msgid " Browse "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1605 src/slic3r/GUI/Tab.cpp:1788
+msgid "Test"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1615
+msgid "Could not get a valid Printer Host reference"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1621 src/slic3r/GUI/Tab.cpp:1801
+msgid "Success!"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1636
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1648
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1649
+msgid "Open CA certificate file"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1676
+msgid ""
+"HTTPS CA File:\n"
+"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"\tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1713 src/slic3r/GUI/Tab.cpp:1912
+msgid "Size and coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1916
+#: src/slic3r/GUI/Tab.cpp:2792
+msgid " Set "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1740
+msgid "Capabilities"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1745
+msgid "Number of extruders of the printer."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1773
+msgid "USB/Serial connection"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1774 src/libslic3r/PrintConfig.cpp:1660
+msgid "Serial port"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1779
+msgid "Rescan serial ports"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1801
+msgid "Connection to printer works correctly."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1804
+msgid "Connection failed."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1817 src/slic3r/GUI/Tab.cpp:1961
+msgid "Print Host upload"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1859 src/libslic3r/PrintConfig.cpp:92
+msgid "Before layer change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1865 src/libslic3r/PrintConfig.cpp:1042
+msgid "After layer change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1871 src/libslic3r/PrintConfig.cpp:2111
+msgid "Tool change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1877
+msgid "Between objects G-code (for sequential printing)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1938
+msgid "Display"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1949 src/slic3r/GUI/Tab.cpp:3102
+msgid "Corrections"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2011 src/slic3r/GUI/Tab.cpp:2073
+#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1098
+#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1121
+#: src/libslic3r/PrintConfig.cpp:1132 src/libslic3r/PrintConfig.cpp:1143
+#: src/libslic3r/PrintConfig.cpp:1154
+msgid "Machine limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2025
+msgid "Values in this column are for Full Power mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2026
+msgid "Full Power"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2031
+msgid "Values in this column are for Silent mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2032
+msgid "Silent"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2040
+msgid "Maximum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2045
+msgid "Maximum accelerations"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2052
+msgid "Jerk limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2057
+msgid "Minimum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2095 src/slic3r/GUI/Tab.cpp:2103
+msgid "Single extruder MM setup"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2104
+msgid "Single extruder multimaterial parameters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2118 src/libslic3r/GCode/PreviewData.cpp:475
+#, possible-c-format
+msgid "Extruder %d"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2125
+msgid "Layer height limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2130
+msgid "Position (for multi-extruder printers)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2133
+msgid "Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2136
+msgid "Only lift Z"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2149
+msgid ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2153
+msgid "Preview"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2284
+msgid ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2286
+msgid "Firmware Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2565
+#, possible-c-format
+msgid "Default preset (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2566
+#, possible-c-format
+msgid "Preset (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2583
+msgid "has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2586
+msgid "is not compatible with printer"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2587
+msgid "is not compatible with print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2589
+msgid "and it has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2592
+msgid "Discard changes and continue anyway?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2593
+msgid "Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2604
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2605
+msgid "Please check your object list before preset changing."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2699
+msgid "The supplied name is empty. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2704
+msgid "Cannot overwrite a system profile."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2708
+msgid "Cannot overwrite an external profile."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2734
+msgid "remove"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2734
+msgid "delete"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2735
+msgid "Are you sure you want to "
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2735
+msgid " the selected preset?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2736
+msgid "Remove"
+msgstr "הסרה"
+
+#: src/slic3r/GUI/Tab.cpp:2737
+msgid " Preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2791
+msgid "All"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2869
+msgid ""
+"LOCKED LOCK;indicates that the settings are the same as the system values "
+"for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2872
+msgid ""
+"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
+"the system values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2878
+msgid ""
+"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2882
+msgid ""
+"BACK ARROW;indicates that the settings were changed and are not equal to the "
+"last saved preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2908
+msgid ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2910
+msgid ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2913
+msgid "WHITE BULLET icon indicates a non system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2916
+msgid ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2918
+msgid ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2924
+msgid ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2925
+msgid ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2931
+msgid ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2932
+msgid ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3031
+msgid " as:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3075
+msgid "the following postfix are not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3079
+msgid "The supplied name is not available."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3092
+msgid "Material"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3094 src/slic3r/GUI/Tab.cpp:3176
+msgid "Layers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3098
+msgid "Exposure"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3183
+msgid "Support head"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3188
+msgid "Support pillar"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3196
+msgid "Connection of the support sticks and junctions"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3200
+msgid "Automatic generation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:293 src/slic3r/GUI/Tab.hpp:381
+msgid "Print Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:311
+msgid "Filament Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:344
+msgid "Printer Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:367
+msgid "Material Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:393
+msgid "Save preset"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:28
+msgid "Update available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:28
+msgid "New version of Slic3r PE is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:35
+msgid "To download, follow the link below."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:42
+msgid "Current version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:44
+msgid "New version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:52
+msgid "Don't notify about new releases any more"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:70 src/slic3r/GUI/UpdateDialogs.cpp:162
+msgid "Configuration update"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:70
+msgid "Configuration update is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:73
+msgid ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:109
+msgid "Slic3r incompatibility"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:109
+msgid "Slic3r configuration is incompatible"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:112
+msgid ""
+"This version of Slic3r PE is not compatible with currently installed "
+"configuration bundles.\n"
+"This probably happened as a result of running an older Slic3r PE after using "
+"a newer one.\n"
+"\n"
+"You may either exit Slic3r and try again with a newer version, or you may re-"
+"run the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this Slic3r.\n"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:121
+#, possible-c-format
+msgid "This Slic3r PE version: %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:126
+msgid "Incompatible bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:142
+msgid "Exit Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:145
+msgid "Re-configure"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:166
+#, possible-c-format
+msgid ""
+"Slic3r PE now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:182
+msgid "For more information please visit our wiki page:"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:10
+msgid "Ramming customization"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:36
+msgid ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:78
+msgid "Total ramming time"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:80
+msgid "Total rammed volume"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:84
+msgid "Ramming line width"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:86
+msgid "Ramming line spacing"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:138
+msgid "Wipe tower - Purging volume adjustment"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:219
+msgid ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:220
+msgid "Extruder changed to"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:228
+msgid "unloaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:229
+msgid "loaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:234
+msgid "Tool #"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:241
+msgid ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:242
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:256
+msgid "From"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:321
+msgid ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:333
+msgid "Show simplified settings"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:333
+msgid "Show advanced settings"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:65
+#, possible-c-format
+msgid "Mismatched type of print host: %s"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:80
+msgid "Connection to OctoPrint works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:86
+msgid "Could not connect to OctoPrint"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:86
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:181
+msgid "Connection to Prusa SLA works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:186
+msgid "Could not connect to Prusa SLA"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:571
+#, possible-c-format
+msgid "requires min. %s and max. %s"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:576
+#, possible-c-format
+msgid "requires min. %s"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:578
+#, possible-c-format
+msgid "requires max. %s"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:219
+#: src/slic3r/Utils/FixModelByWin10.cpp:349
+msgid "Exporting the source model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing the model by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:251
+#: src/slic3r/Utils/FixModelByWin10.cpp:367
+msgid "Loading the repaired model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:263
+#: src/slic3r/Utils/FixModelByWin10.cpp:270
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgid "Saving mesh into the 3MF container failed."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:334
+msgid "Model fixing"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:335
+msgid "Exporting model..."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:357
+msgid "Export of a temporary 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:372
+msgid "Import of the repaired 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:375
+msgid "Model repair finished"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:379
+msgid "Model repair canceled"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:396
+msgid "Model repaired successfully"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:396
+#: src/slic3r/Utils/FixModelByWin10.cpp:399
+msgid "Model Repair by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:399
+msgid "Model repair failed: \n"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1175
+msgid "All objects are outside of the print volume."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1201
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1216
+msgid ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1226
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1228
+msgid ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1234
+msgid ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1239
+msgid ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1241
+msgid ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1253
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heigths"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1255
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1257
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1259
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1281
+msgid ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1290
+msgid "The supplied settings will cause an empty print."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1307
+msgid ""
+"One or more object were assigned an extruder that the printer does not have."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1316
+msgid ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1324
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1328
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1335
+msgid "first_layer_height"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1350
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1354
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:32 src/libslic3r/PrintConfig.cpp:33
+msgid "Printer technology"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:41
+msgid "Bed shape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:48
+msgid ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:56
+msgid "Max print height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:57
+msgid ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:73
+msgid "Avoid crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:74
+msgid ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:2080
+msgid "Other layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:83
+msgid ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:86
+msgid "Bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:93
+msgid ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:104
+msgid "Between objects G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:105
+msgid ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:114
+msgctxt "Layers"
+msgid "Bottom"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:116
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:118
+msgid "Bottom solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:123
+msgid "Bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:124
+msgid ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:126 src/libslic3r/PrintConfig.cpp:274
+#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:941
+#: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1156 src/libslic3r/PrintConfig.cpp:1386
+msgid "mm/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:133
+msgid "Bridging angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:135
+msgid ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:138 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:1637 src/libslic3r/PrintConfig.cpp:1648
+#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:2063
+#: src/libslic3r/PrintConfig.cpp:2578
+msgid "°"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:145
+msgid "Bridges fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:146
+msgid "This fan speed is enforced during all bridges and overhangs."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:147 src/libslic3r/PrintConfig.cpp:747
+#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1232
+#: src/libslic3r/PrintConfig.cpp:1517
+msgid "%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:155
+msgid "Bridge flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:157
+msgid ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:168
+msgid "Bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:170
+msgid "Speed for printing bridges."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:171 src/libslic3r/PrintConfig.cpp:564
+#: src/libslic3r/PrintConfig.cpp:573 src/libslic3r/PrintConfig.cpp:583
+#: src/libslic3r/PrintConfig.cpp:592 src/libslic3r/PrintConfig.cpp:623
+#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:884
+#: src/libslic3r/PrintConfig.cpp:1013 src/libslic3r/PrintConfig.cpp:1090
+#: src/libslic3r/PrintConfig.cpp:1110 src/libslic3r/PrintConfig.cpp:1123
+#: src/libslic3r/PrintConfig.cpp:1134 src/libslic3r/PrintConfig.cpp:1189
+#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:1611
+#: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2160
+msgid "mm/s"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:178
+msgid "Brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:179
+msgid ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid "Clip multi-part objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:188
+msgid ""
+"When printing multi-material objects, this settings will make slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:196
+msgid "Colorprint height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:197
+msgid "Heights at which a filament change is to occur. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:207
+msgid "Compatible printers condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:208
+msgid ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:220
+msgid "Compatible print profiles condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:221
+msgid ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:235
+msgid "Complete individual objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:236
+msgid ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:245
+msgid "Enable auto cooling"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:246
+msgid ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:252
+msgid "Cooling tube position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:253
+msgid "Distance of the center-point of the cooling tube from the extruder tip "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:261
+msgid "Cooling tube length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:262
+msgid "Length of the cooling tube to limit space for cooling moves inside it "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:271
+msgid ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:281
+msgid "Default filament profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:282
+msgid ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:287
+msgid "Default print profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:288 src/libslic3r/PrintConfig.cpp:2469
+#: src/libslic3r/PrintConfig.cpp:2479
+msgid ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:293
+msgid "Disable fan for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:294
+msgid ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:296 src/libslic3r/PrintConfig.cpp:952
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:1691
+#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1935
+#: src/libslic3r/PrintConfig.cpp:1985
+msgid "layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:304
+msgid "Don't support bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:306
+msgid ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:313
+msgid "Distance between copies"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:314
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:322
+msgid "Elephant foot compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:324
+msgid ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:334
+msgid ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:345
+msgid ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:356
+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:358
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:365
+msgid "Top/bottom fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:367
+msgid ""
+"Fill pattern for top/bottom infill. This only affects the external visible "
+"layer, and not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:376 src/libslic3r/PrintConfig.cpp:800
+#: src/libslic3r/PrintConfig.cpp:2021
+msgid "Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:377 src/libslic3r/PrintConfig.cpp:806
+msgid "Concentric"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:378 src/libslic3r/PrintConfig.cpp:810
+msgid "Hilbert Curve"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:379 src/libslic3r/PrintConfig.cpp:811
+msgid "Archimedean Chords"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:812
+msgid "Octagram Spiral"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:386 src/libslic3r/PrintConfig.cpp:397
+msgid "External perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:388
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:391 src/libslic3r/PrintConfig.cpp:841
+#: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1769 src/libslic3r/PrintConfig.cpp:1958
+#: src/libslic3r/PrintConfig.cpp:2129
+msgid "mm or % (leave 0 for default)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:399
+msgid ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:864
+#: src/libslic3r/PrintConfig.cpp:1725 src/libslic3r/PrintConfig.cpp:1780
+#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2142
+msgid "mm/s or %"
+msgstr "מ\"מ\\ש או %"
+
+#: src/libslic3r/PrintConfig.cpp:409
+msgid "External perimeters first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:411
+msgid ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:418
+msgid "Extra perimeters if needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:420
+#, no-c-format
+msgid ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:431
+msgid ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:455
+msgid "Radius"
+msgstr "קוטר"
+
+#: src/libslic3r/PrintConfig.cpp:456
+msgid ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:467
+msgid "Extruder Color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:468 src/libslic3r/PrintConfig.cpp:535
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:475
+msgid "Extruder offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:476
+msgid ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:486
+msgid "Extrusion axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:487
+msgid ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:493
+msgid "Extrusion multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:494
+msgid ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:503
+msgid "Default extrusion width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:505
+msgid ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:509
+msgid "mm or % (leave 0 for auto)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:515
+msgid "Keep fan always on"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:516
+msgid ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:522
+msgid "Enable fan if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:523
+msgid ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1711
+msgid "approximate seconds"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:534
+msgid "Color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:541
+msgid "Filament notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:542
+msgid "You can put your notes regarding the filament here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:551 src/libslic3r/PrintConfig.cpp:1196
+msgid "Max volumetric speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:552
+msgid ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:555 src/libslic3r/PrintConfig.cpp:1199
+msgid "mm³/s"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:562
+msgid "Loading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:563
+msgid "Speed used for loading the filament on the wipe tower. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:571
+msgid "Loading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:572
+msgid "Speed used at the very beginning of loading phase. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:580
+msgid "Unloading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:581
+msgid ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming). "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:590
+msgid "Unloading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:591
+msgid ""
+"Speed used for unloading the tip of the filament immediately after ramming. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:599
+msgid "Delay after unloading"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:600
+msgid ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:610
+msgid "Number of cooling moves"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:611
+msgid ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:620
+msgid "Speed of the first cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:621
+msgid "Cooling moves are gradually accelerating beginning at this speed. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:629
+msgid "Minimal purge on wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:630
+msgid ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:635
+msgid "mm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:641
+msgid "Speed of the last cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:642
+msgid "Cooling moves are gradually accelerating towards this speed. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:650
+msgid "Filament load time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:651
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:659
+msgid "Ramming parameters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:660
+msgid ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:667
+msgid "Filament unload time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:668
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:677
+msgid ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:685
+msgid "Density"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:686
+msgid ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:689
+msgid "g/cm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:695
+msgid "Filament type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:696
+msgid "The filament material type for use in custom G-codes."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:712
+msgid "Soluble material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:713
+msgid "Soluble material is most likely used for a soluble support."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:719
+msgid ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:720
+msgid "money/kg"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:729
+msgid "Fill angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:731
+msgid ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:744
+msgid "Fill density"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:746
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:782
+msgid "Fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:784
+msgid "Fill pattern for general low-density infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:801
+msgid "Grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:802
+msgid "Triangles"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:803
+msgid "Stars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:804
+msgid "Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:805
+msgid "Line"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:2023
+msgid "Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:808
+msgid "3D Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:809
+msgid "Gyroid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:826
+#: src/libslic3r/PrintConfig.cpp:835 src/libslic3r/PrintConfig.cpp:871
+msgid "First layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:817
+msgid ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:827
+msgid ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:837
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:848
+msgid "First layer height"
+msgstr "גובה שכבה ראשונה"
+
+#: src/libslic3r/PrintConfig.cpp:850
+msgid ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1003
+#: src/libslic3r/PrintConfig.cpp:1884
+msgid "mm or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:860
+msgid "First layer speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:861
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:872
+msgid ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:882
+msgid ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:890
+msgid "Verbose G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:891
+msgid ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:899
+msgid "G-code flavor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:900
+msgid ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "No extrusion"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:929
+msgid "High extruder current on filament swap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:930
+msgid ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:939
+msgid ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:948
+msgid "Combine infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:950
+msgid ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:954
+msgid "Combine infill every n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:960
+msgid "Infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:962
+msgid "The extruder to use when printing infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:971
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:981
+msgid "Infill before perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:982
+msgid ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:988
+msgid "Only infill where needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:990
+msgid ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:998
+msgid "Infill/perimeters overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1000
+msgid ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1012
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr "Speed for printing the internal fill. הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:1020
+msgid "Inherits profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1021
+msgid "Name of the profile, from which this profile inherits."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1032
+msgid "Interface shells"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1033
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1043
+msgid ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1054
+msgid "Supports remaining times"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1055
+msgid ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1063
+msgid "Supports silent mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1064
+msgid "Set silent mode for the G-code flavor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1087
+msgid "Maximum feedrate %1%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1089
+msgid "Maximum feedrate of the %1% axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1097
+msgid "Maximum acceleration %1%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1099
+msgid "Maximum acceleration of the %1% axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1107
+msgid "Maximum jerk %1%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1109
+msgid "Maximum jerk of the %1% axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1122
+msgid "Minimum feedrate when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133
+msgid "Minimum travel feedrate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1144
+msgid "Maximum acceleration when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1155
+msgid "Maximum acceleration when retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1173
+msgid "Max"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1164
+msgid "This setting represents the maximum speed of your fan."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1174
+#, no-c-format
+msgid ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1185
+msgid "Max print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1186
+msgid ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1197
+msgid ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1206
+msgid "Max volumetric slope positive"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1207 src/libslic3r/PrintConfig.cpp:1219
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1223
+msgid "mm³/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1218
+msgid "Max volumetric slope negative"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1240
+msgid "Min"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1231
+msgid "This setting represents the minimum PWM your fan needs to work."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1241
+msgid ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1250
+msgid "Min print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1251
+msgid "Slic3r will not scale speed down below this speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "Minimal filament extrusion length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1260
+msgid ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1270
+msgid "Configuration notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1271
+msgid ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1281
+msgid "Nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1282
+msgid ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1288
+msgid "Host Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1289
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1301
+msgid "API Key / Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1302
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1317
+msgid "Hostname, IP or URL"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1318
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1325
+msgid "Only retract when crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1326
+msgid ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1334
+msgid ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1342
+msgid "Output filename format"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1343
+msgid ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1353
+msgid "Detect bridging perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1355
+msgid ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1362
+msgid "Filament parking position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1363
+msgid ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1372
+msgid "Extra loading distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1373
+msgid ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1382 src/libslic3r/PrintConfig.cpp:1402
+#: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1425
+msgid "Perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1383
+msgid ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1392
+msgid "Perimeter extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1394
+msgid ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1404
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1417
+msgid ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr "Speed for perimeters (contours, aka vertical shells). הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:1427
+msgid ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1431
+msgid "(minimum)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1439
+msgid ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1452
+msgid "Printer type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1453
+msgid "Type of the printer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1457
+msgid "Printer notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid "You can put your notes regarding the printer here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid "Printer vendor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1468
+msgid "Name of the printer vendor."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1472
+msgid "Printer variant"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1473
+msgid ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1483
+msgid "Raft layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1485
+msgid ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1494
+msgid "Resolution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1495
+msgid ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1506
+msgid "Minimum travel after retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid ""
+"Retraction is not triggered when travel moves are shorter than this length."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1514
+msgid "Retract amount before wipe"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1515
+msgid ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1523
+msgid "Retract on layer change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1524
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:1539
+msgid "Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1531
+msgid "Retraction Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1532
+msgid ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:1544
+msgid "mm (zero to disable)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1540
+msgid "Retraction Length (Toolchange)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1541
+msgid ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1550
+msgid "Lift Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1551
+msgid ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1559
+msgid "Above Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1560
+msgid "Only lift Z above"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1561
+msgid ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1569
+msgid "Below Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1570
+msgid "Only lift Z below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1571
+msgid ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1580 src/libslic3r/PrintConfig.cpp:1589
+msgid "Extra length on restart"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1590
+msgid ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1598 src/libslic3r/PrintConfig.cpp:1599
+msgid "Retraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1600
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1608
+msgid "Deretraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1609
+msgid ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1617
+msgid "Seam position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1619
+msgid "Position of perimeters starting points."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1626
+msgid "Random"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1627
+msgid "Nearest"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1628
+msgid "Aligned"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1629
+msgid "Rear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1636
+msgid "Direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1638
+msgid "Preferred direction of the seam"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1639
+msgid "Seam preferred direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1647
+msgid "Jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1649
+msgid "Seam preferred direction jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1650
+msgid "Preferred direction of the seam - jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1661
+msgid "USB/serial port for printer connection."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1669
+msgid "Serial port speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1670
+msgid "Speed (baud) of USB/serial port for printer connection."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1679
+msgid "Distance from object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1680
+msgid ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1688
+msgid "Skirt height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1689
+msgid ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1697
+msgid "Loops (minimum)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1698
+msgid "Skirt Loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1699
+msgid ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1708
+msgid "Slow down if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1709
+msgid ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1720
+msgid "Small perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1722
+msgid ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:1732
+msgid "Solid infill threshold area"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1734
+msgid ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1735
+msgid "mm²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1742
+msgid "Solid infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1744
+msgid "The extruder to use when printing solid infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1751
+msgid "Solid infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1753
+msgid ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1766
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1777
+msgid ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+msgstr "Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed above. הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:1789
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1796
+msgid "Spiral vase"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1797
+msgid ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1806
+msgid "Temperature variation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1807
+msgid ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1818
+msgid ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1834
+msgid ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1850
+msgid "Single Extruder Multi Material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1851
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1857
+msgid "Prime all printing extruders"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1858
+msgid ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1864
+msgid "Generate support material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1866
+msgid "Enable support material generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1871
+msgid "Auto generated supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1873
+msgid ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1880
+msgid "XY separation between an object and its support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1882
+msgid ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1893
+msgid "Pattern angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1895
+msgid ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1906
+msgid ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1913
+msgid "Contact Z distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1915
+msgid ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1923
+msgid "soluble"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1924
+msgid "detachable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1929
+msgid "Enforce support for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1931
+msgid ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1937
+msgid "Enforce support for the first n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1943
+msgid "Support material/raft/skirt extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1945
+msgid ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1955
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1964
+msgid "Interface loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1966
+msgid ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1972
+msgid "Support material/raft interface extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1974
+msgid ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1982
+msgid "Interface layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1984
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1992
+msgid "Interface pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1994
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2004
+msgid ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2013
+msgid "Pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2015
+msgid "Pattern used to generate support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2022
+msgid "Rectilinear grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2028
+msgid "Pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2030
+msgid "Spacing between support material lines."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2040
+msgid "Speed for printing support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2047
+msgid "Synchronize with object layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2049
+msgid ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2056
+msgid "Overhang threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2058
+msgid ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2071
+msgid "With sheath around the support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2073
+msgid ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2081
+msgid ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2084
+msgid "Temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2090
+msgid "Detect thin walls"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2092
+msgid ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2099
+msgid "Threads"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2100
+msgid ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2112
+msgid ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2125
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2137
+msgid ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+msgstr "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. הגדר 0 עבור אוטומטי."
+
+#: src/libslic3r/PrintConfig.cpp:2149
+msgctxt "Layers"
+msgid "Top"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2151
+msgid "Number of solid layers to generate on top surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2153
+msgid "Top solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2159
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2168
+msgid "Use firmware retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2176
+msgid "Use relative E distances"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2177
+msgid ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2184
+msgid "Use volumetric E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2185
+msgid ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2196
+msgid "Enable variable layer height feature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2197
+msgid ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2204
+msgid "Wipe while retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2205
+msgid ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2213
+msgid ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2220
+msgid "Purging volumes - load/unload volumes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2221
+msgid ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2228
+msgid "Purging volumes - matrix"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2229
+msgid ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2239
+msgid "Position X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2240
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Position Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2248
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2256
+msgid "Width of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2263
+msgid "Wipe tower rotation angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2264
+msgid "Wipe tower rotation angle with respect to x-axis "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2265
+msgid "degrees"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2272
+msgid "Wipe into this object's infill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2273
+msgid ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2281
+msgid "Wipe into this object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2282
+msgid ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2289
+msgid "Maximal bridging distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2290
+msgid "Maximal distance between supports on sparse infill sections. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2297
+msgid "XY Size Compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2299
+msgid ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2308
+msgid "Z offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2309
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2319
+msgid "Bed size X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2327
+#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2343
+#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2359
+msgid "Dwarf"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2326
+msgid "Bed size Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2333
+msgid "Picture resolution X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2344
+msgid "px"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2342
+msgid "Picture resolution Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2350 src/libslic3r/PrintConfig.cpp:2430
+#: src/libslic3r/PrintConfig.cpp:2431
+msgid "Exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2358
+msgid "Exposure time first layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2373
+msgid "Display width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2374
+msgid "Width of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2380
+msgid "Display height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2381
+msgid "Height of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2387
+msgid "Number of pixels in"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2389
+msgid "Number of pixels in X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2396
+msgid "Number of pixels in Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2402
+msgid "Display orientation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2403
+msgid ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2410
+msgid "Landscape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2411
+msgid "Portrait"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2416
+msgid "Printer scaling correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2422 src/libslic3r/PrintConfig.cpp:2423
+msgid "Initial layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439
+msgid "Initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2447
+msgid "Correction for expansion when printing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2452 src/libslic3r/PrintConfig.cpp:2453
+msgid "Correction for expansion after curing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2458
+msgid "SLA print material notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2459
+msgid "You can put your notes regarding the SLA print material here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2468 src/libslic3r/PrintConfig.cpp:2478
+msgid "Default SLA material profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2487
+msgid "Generate supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2489
+msgid "Generate supports for the models"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2494
+msgid "Support head front diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2496
+msgid "Diameter of the pointing side of the head"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2503
+msgid "Support head penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2505
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2512
+msgid "Support head width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2514
+msgid "Width from the back sphere center to the front sphere center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2521
+msgid "Support pillar diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2523
+msgid "Diameter in mm of the support pillars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2530
+msgid "Support pillar connection mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2531
+msgid ""
+"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2540
+msgid "Zig-Zag"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2541
+msgid "Cross"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2542
+msgid "Dynamic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2546
+msgid "Pillar widening factor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2548
+msgid ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2557
+msgid "Support base diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2559
+msgid "Diameter in mm of the pillar base"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2566
+msgid "Support base height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2568
+msgid "The height of the pillar base cone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2575
+msgid "Critical angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2577
+msgid "The default angle for connecting support sticks and junctions."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2584
+msgid "Max bridge length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2586
+msgid "The max length of a bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2593
+msgid "Object elevation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2595
+msgid "How much the supports should lift up the supported object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2602
+msgid "Density on horizontal surfaces"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2604
+msgid ""
+"How many support points (approximately) should be placed on horizontal "
+"surface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2605 src/libslic3r/PrintConfig.cpp:2614
+msgid "points per square dm"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2611
+msgid "Density on surfaces at 45 degrees"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2613
+msgid ""
+"How many support points (approximately) should be placed on surface sloping "
+"at 45 degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2620
+msgid "Minimal support point height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2622
+msgid "No support points will be placed lower than this value from the bottom."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2629
+msgid "Use pad"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2631
+msgid "Add a pad underneath the supported model"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2636
+msgid "Pad wall thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2645
+msgid "Pad wall height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2654
+msgid "Max merge distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2663
+msgid "Pad edge radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3017
+msgid "Cut model at the given Z."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3022
+msgid "Dont arrange"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3023
+msgid ""
+"Don't arrange the objects on the build plate. The model coordinates define "
+"the absolute positions on the build plate. The option --center will be "
+"ignored."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3030
+msgid "User data directory"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3031
+msgid ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3038
+msgid "Export 3MF"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3039
+msgid "Slice the model and export slices as 3MF."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3044
+msgid "Slice"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3045
+msgid "Slice the model and export gcode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3050
+msgid "Help"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3051
+msgid "Show this help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3056
+msgid "Use GUI"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3057
+msgid ""
+"Forces the GUI launch instead of command line slicing (if you supply a model "
+"file, it will be loaded into the plater)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3063
+msgid "Output Model Info"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3064
+msgid "Write information about the model to the console."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3069
+msgid "Load config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3070
+msgid ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3075
+msgid "Do not use GUI"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3076
+msgid ""
+"Forces the command line slicing instead of gui. This takes precedence over --"
+"gui if both are present."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3081
+msgid "Output File"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3082
+msgid ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3088
+msgid "Rotation angle around the Z axis in degrees (0-360, default: 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3093
+msgid "Rotate around X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid "Rotation angle around the X axis in degrees (0-360, default: 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3099
+msgid "Rotate around Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3100
+msgid "Rotation angle around the Y axis in degrees (0-360, default: 0)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3105
+msgid "Save config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3106
+msgid "Save configuration to the specified file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Scaling factor (default: 1)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3125
+msgid "Print center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3126
+msgid "Center the print around the given center (default: 100, 100)."
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:176
+msgid "Mixed"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:396
+msgid "Height (mm)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:398
+msgid "Width (mm)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:400
+msgid "Speed (mm/s)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:402
+msgid "Volumetric flow rate (mm3/s)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:491
+msgid "Default print color"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:495
+#, possible-c-format
+msgid "up to %.2f mm"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:499
+#, possible-c-format
+msgid "above %.2f mm"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:504
+#, possible-c-format
+msgid "%.2f - %.2f mm"
+msgstr ""
diff --git a/resources/localization/SuperSlicer.pot b/resources/localization/SuperSlicer.pot
index 2141aa68e6b..1abf5b260f4 100644
--- a/resources/localization/SuperSlicer.pot
+++ b/resources/localization/SuperSlicer.pot
@@ -3,144 +3,133 @@
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-#: src/slic3r/GUI/Tab.cpp:1661 src/libslic3r/PrintConfig.cpp:947
-#: src/libslic3r/PrintConfig.cpp:1769 src/libslic3r/PrintConfig.cpp:3713
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-07 20:29+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-
-#: src/slic3r/GUI/AboutDialog.cpp:43 src/slic3r/GUI/AboutDialog.cpp:298
-msgid "Portions copyright"
+#: src/slic3r/GUI/Tab.cpp:1647 src/libslic3r/PrintConfig.cpp:935
+#: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/PrintConfig.cpp:3606
+msgid ""
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:133 src/slic3r/GUI/AboutDialog.cpp:261
+#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:298
+msgid "Portions copyright"
+msgstr "חלקים בזכויות יוצרים"
+
+#: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261
 msgid "Copyright"
-msgstr ""
+msgstr "זכויות יוצרים"
 
 #. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:135
+#: src/slic3r/GUI/AboutDialog.cpp:134
 msgid ""
 "License agreements of all following programs (libraries) are part of "
 "application license agreement"
-msgstr ""
+msgstr "הסכמי רישיון של כל התוכניות הבאות (ספריות) הם חלק מהסכם הרישיון ליישום"
 
 #: src/slic3r/GUI/AboutDialog.cpp:204
 #, possible-c-format
 msgid "About %s"
-msgstr ""
+msgstr "אודות %s"
 
 #: src/slic3r/GUI/AboutDialog.cpp:236 src/slic3r/GUI/GUI_App.cpp:239
-#: src/slic3r/GUI/MainFrame.cpp:152
+#: src/slic3r/GUI/MainFrame.cpp:153
 msgid "Version"
-msgstr ""
+msgstr "גרסה"
 
 #. TRN "Slic3r _is licensed under the_ License"
 #: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:243
 msgid "is licensed under the"
-msgstr ""
+msgstr "מורשה תחת"
 
 #: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:243
 msgid "GNU Affero General Public License, version 3"
-msgstr ""
+msgstr "רישיון ציבורי כללי של GNU Affero, גרסה 3"
 
 #: src/slic3r/GUI/AboutDialog.cpp:265
 msgid ""
 "SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro "
 "Ranellucci and the RepRap community."
-msgstr ""
+msgstr "SuperSlicer מבוססת על PrusaSlicer המבוססת על Slic3r על ידי אלסנדרו רנלוצ'י וקהילת RepRap."
 
 #: src/slic3r/GUI/AboutDialog.cpp:266
 msgid ""
 "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
 "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand "
 "Rémi and numerous others."
-msgstr ""
+msgstr "תרומות מאת הנריק בריקס אנדרסן, ניקולה דנדרמון, מארק הינדס, פטר לדווינה, ג'וזף לנוקס, י 'ספיר, מייק שלדרייק, ווייטק בובניק, דורנד רמי ורבים אחרים."
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:77
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
 "If you are sure you have enough RAM on your system, this may also be a bug "
 "and we would be glad if you reported it."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:164
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:184
-msgid "Unknown error occured during exporting G-code."
-msgstr ""
+msgstr "%s נתקל בשגיאה. זה ככל הנראה נגרם על ידי שגיאת חוסר מקום האם בוודאות יש מספיק זיכרון זמני (RAM) במערכת? זה גם יכול להיות תקלה ואודה לדיווחים עליה."
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:169
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:157
 #, possible-c-format
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. Maybe the SD "
 "card is write locked?\n"
 "Error message: %1%"
-msgstr ""
+msgstr "Copying of the temporary G-code to the output G-code failed. אולי כרטיס הזיכרון נעול לכתיבה?\n"
+"הודעת שגיאה: %1%"
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:160
 #, possible-c-format
 msgid ""
 "Copying of the temporary G-code to the output G-code failed. There might be "
 "problem with target device, please try exporting again or using different "
 "device. The corrupted output G-code is at %1%.tmp."
-msgstr ""
+msgstr "Copying of the temporary G-code to the output G-code failed. ייתכן שיש בעיה במכשיר היעד. נסה לייצא שוב או להשתמש במכשיר אחר. The corrupted output G-code is at %1%.tmp."
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:175
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
 #, possible-c-format
 msgid ""
 "Renaming of the G-code after copying to the selected destination folder has "
 "failed. Current path is %1%.tmp. Please try exporting again."
-msgstr ""
+msgstr "Renaming of the G-code after copying to the selected destination folder has failed. הנתיב הנוכחי הוא: %1%.tmp. אנא נסה לבצע ייצוא שנית"
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:178
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:166
 #, possible-c-format
 msgid ""
 "Copying of the temporary G-code has finished but the original code at %1% "
 "couldn't be opened during copy check. The output G-code is at %2%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:181
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:169
 #, possible-c-format
 msgid ""
 "Copying of the temporary G-code has finished but the exported code couldn't "
 "be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:545
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
+msgid "Unknown error occured during exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:534
 msgid "Running post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:190
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:179
 #, possible-c-format
 msgid "G-code file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:195
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:251
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:184
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:240
 msgid "Slicing complete"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:246
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:235
 #, possible-c-format
 msgid "Masked SLA file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:548
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:537
 msgid "Copying of the temporary G-code to the output G-code failed"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:578
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:567
 #, possible-c-format
 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
 msgstr ""
@@ -148,15 +137,15 @@ msgstr ""
 #: src/slic3r/GUI/BedShapeDialog.cpp:93
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162
 msgid "Size"
-msgstr ""
+msgstr "גודל"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:94
 msgid "Origin"
-msgstr ""
+msgstr "מוצא"
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1399
+#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1387
 msgid "Diameter"
-msgstr ""
+msgstr "קוטר"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:110
 msgid "Size in X and Y of the rectangular plate."
@@ -169,10 +158,10 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:241
-#: src/slic3r/GUI/ConfigWizard.cpp:1371 src/slic3r/GUI/ConfigWizard.cpp:1385
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88
-#: src/slic3r/GUI/GCodeViewer.cpp:2381 src/slic3r/GUI/GCodeViewer.cpp:2387
-#: src/slic3r/GUI/GCodeViewer.cpp:2395 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
+#: src/slic3r/GUI/ConfigWizard.cpp:1355 src/slic3r/GUI/ConfigWizard.cpp:1369
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
+#: src/slic3r/GUI/GCodeViewer.cpp:2369 src/slic3r/GUI/GCodeViewer.cpp:2375
+#: src/slic3r/GUI/GCodeViewer.cpp:2383 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
@@ -180,204 +169,207 @@ msgstr ""
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96
 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:114
 #: src/libslic3r/PrintConfig.cpp:123 src/libslic3r/PrintConfig.cpp:134
-#: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:412
-#: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:451
-#: src/libslic3r/PrintConfig.cpp:474 src/libslic3r/PrintConfig.cpp:592
-#: src/libslic3r/PrintConfig.cpp:601 src/libslic3r/PrintConfig.cpp:656
-#: src/libslic3r/PrintConfig.cpp:1033 src/libslic3r/PrintConfig.cpp:1046
-#: src/libslic3r/PrintConfig.cpp:1067 src/libslic3r/PrintConfig.cpp:1298
-#: src/libslic3r/PrintConfig.cpp:1402 src/libslic3r/PrintConfig.cpp:1635
-#: src/libslic3r/PrintConfig.cpp:2163 src/libslic3r/PrintConfig.cpp:2415
-#: src/libslic3r/PrintConfig.cpp:2494 src/libslic3r/PrintConfig.cpp:2504
-#: src/libslic3r/PrintConfig.cpp:2536 src/libslic3r/PrintConfig.cpp:2556
-#: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2722
-#: src/libslic3r/PrintConfig.cpp:2864 src/libslic3r/PrintConfig.cpp:2873
-#: src/libslic3r/PrintConfig.cpp:2928 src/libslic3r/PrintConfig.cpp:2937
-#: src/libslic3r/PrintConfig.cpp:2948 src/libslic3r/PrintConfig.cpp:2978
-#: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3076
-#: src/libslic3r/PrintConfig.cpp:3094 src/libslic3r/PrintConfig.cpp:3206
-#: src/libslic3r/PrintConfig.cpp:3217 src/libslic3r/PrintConfig.cpp:3357
-#: src/libslic3r/PrintConfig.cpp:3483 src/libslic3r/PrintConfig.cpp:3496
-#: src/libslic3r/PrintConfig.cpp:3565 src/libslic3r/PrintConfig.cpp:3624
-#: src/libslic3r/PrintConfig.cpp:3692 src/libslic3r/PrintConfig.cpp:3850
-#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:4002
-#: src/libslic3r/PrintConfig.cpp:4010 src/libslic3r/PrintConfig.cpp:4043
-#: src/libslic3r/PrintConfig.cpp:4050 src/libslic3r/PrintConfig.cpp:4062
-#: src/libslic3r/PrintConfig.cpp:4073 src/libslic3r/PrintConfig.cpp:4085
-#: src/libslic3r/PrintConfig.cpp:4117 src/libslic3r/PrintConfig.cpp:4128
-#: src/libslic3r/PrintConfig.cpp:4245 src/libslic3r/PrintConfig.cpp:4256
-#: src/libslic3r/PrintConfig.cpp:4264 src/libslic3r/PrintConfig.cpp:4272
-#: src/libslic3r/PrintConfig.cpp:4437 src/libslic3r/PrintConfig.cpp:4471
-#: src/libslic3r/PrintConfig.cpp:4610 src/libslic3r/PrintConfig.cpp:4619
-#: src/libslic3r/PrintConfig.cpp:4628 src/libslic3r/PrintConfig.cpp:4638
-#: src/libslic3r/PrintConfig.cpp:4703 src/libslic3r/PrintConfig.cpp:4713
-#: src/libslic3r/PrintConfig.cpp:4725 src/libslic3r/PrintConfig.cpp:4745
-#: src/libslic3r/PrintConfig.cpp:4755 src/libslic3r/PrintConfig.cpp:4767
-#: src/libslic3r/PrintConfig.cpp:4785 src/libslic3r/PrintConfig.cpp:4800
-#: src/libslic3r/PrintConfig.cpp:4814 src/libslic3r/PrintConfig.cpp:4825
-#: src/libslic3r/PrintConfig.cpp:4838 src/libslic3r/PrintConfig.cpp:4883
-#: src/libslic3r/PrintConfig.cpp:4893 src/libslic3r/PrintConfig.cpp:4902
-#: src/libslic3r/PrintConfig.cpp:4912 src/libslic3r/PrintConfig.cpp:4928
-#: src/libslic3r/PrintConfig.cpp:4952
+#: src/libslic3r/PrintConfig.cpp:284 src/libslic3r/PrintConfig.cpp:410
+#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:459
+#: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:586
+#: src/libslic3r/PrintConfig.cpp:641 src/libslic3r/PrintConfig.cpp:1021
+#: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1055
+#: src/libslic3r/PrintConfig.cpp:1286 src/libslic3r/PrintConfig.cpp:1390
+#: src/libslic3r/PrintConfig.cpp:1623 src/libslic3r/PrintConfig.cpp:2062
+#: src/libslic3r/PrintConfig.cpp:2314 src/libslic3r/PrintConfig.cpp:2393
+#: src/libslic3r/PrintConfig.cpp:2403 src/libslic3r/PrintConfig.cpp:2435
+#: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2611
+#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2760
+#: src/libslic3r/PrintConfig.cpp:2769 src/libslic3r/PrintConfig.cpp:2824
+#: src/libslic3r/PrintConfig.cpp:2833 src/libslic3r/PrintConfig.cpp:2844
+#: src/libslic3r/PrintConfig.cpp:2874 src/libslic3r/PrintConfig.cpp:2883
+#: src/libslic3r/PrintConfig.cpp:2972 src/libslic3r/PrintConfig.cpp:2990
+#: src/libslic3r/PrintConfig.cpp:3102 src/libslic3r/PrintConfig.cpp:3113
+#: src/libslic3r/PrintConfig.cpp:3253 src/libslic3r/PrintConfig.cpp:3376
+#: src/libslic3r/PrintConfig.cpp:3389 src/libslic3r/PrintConfig.cpp:3458
+#: src/libslic3r/PrintConfig.cpp:3517 src/libslic3r/PrintConfig.cpp:3585
+#: src/libslic3r/PrintConfig.cpp:3743 src/libslic3r/PrintConfig.cpp:3887
+#: src/libslic3r/PrintConfig.cpp:3895 src/libslic3r/PrintConfig.cpp:3903
+#: src/libslic3r/PrintConfig.cpp:3936 src/libslic3r/PrintConfig.cpp:3943
+#: src/libslic3r/PrintConfig.cpp:3955 src/libslic3r/PrintConfig.cpp:3966
+#: src/libslic3r/PrintConfig.cpp:3978 src/libslic3r/PrintConfig.cpp:4010
+#: src/libslic3r/PrintConfig.cpp:4021 src/libslic3r/PrintConfig.cpp:4138
+#: src/libslic3r/PrintConfig.cpp:4149 src/libslic3r/PrintConfig.cpp:4157
+#: src/libslic3r/PrintConfig.cpp:4165 src/libslic3r/PrintConfig.cpp:4330
+#: src/libslic3r/PrintConfig.cpp:4364 src/libslic3r/PrintConfig.cpp:4503
+#: src/libslic3r/PrintConfig.cpp:4512 src/libslic3r/PrintConfig.cpp:4521
+#: src/libslic3r/PrintConfig.cpp:4531 src/libslic3r/PrintConfig.cpp:4596
+#: src/libslic3r/PrintConfig.cpp:4606 src/libslic3r/PrintConfig.cpp:4618
+#: src/libslic3r/PrintConfig.cpp:4638 src/libslic3r/PrintConfig.cpp:4648
+#: src/libslic3r/PrintConfig.cpp:4660 src/libslic3r/PrintConfig.cpp:4678
+#: src/libslic3r/PrintConfig.cpp:4693 src/libslic3r/PrintConfig.cpp:4707
+#: src/libslic3r/PrintConfig.cpp:4718 src/libslic3r/PrintConfig.cpp:4731
+#: src/libslic3r/PrintConfig.cpp:4776 src/libslic3r/PrintConfig.cpp:4786
+#: src/libslic3r/PrintConfig.cpp:4795 src/libslic3r/PrintConfig.cpp:4805
+#: src/libslic3r/PrintConfig.cpp:4821 src/libslic3r/PrintConfig.cpp:4845
 msgid "mm"
-msgstr ""
+msgstr "מ\"מ"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:131
 msgid ""
 "Diameter of the print bed. It is assumed that origin (0,0) is located in the "
 "center."
-msgstr ""
+msgstr "קוטר מיטת ההדפסה. ההנחה היא שמוצא (0,0) נמצא במרכז."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:141
 msgid "Rectangular"
-msgstr ""
+msgstr "מלבני"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:142
 msgid "Circular"
-msgstr ""
+msgstr "מעוגל"
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:272
-#: src/slic3r/GUI/GUI_Preview.cpp:1080 src/libslic3r/ExtrusionEntity.cpp:287
+#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:286
+#: src/slic3r/GUI/GUI_Preview.cpp:1032 src/libslic3r/ExtrusionEntity.cpp:287
 #: src/libslic3r/ExtrusionEntity.cpp:330
 msgid "Custom"
-msgstr ""
+msgstr "מותאים אישית"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:145
 msgid "Invalid"
-msgstr ""
+msgstr "לא תקין"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2240
 msgid "Shape"
-msgstr ""
+msgstr "צורה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:243
 msgid "Load shape from STL..."
-msgstr ""
+msgstr "טען צורה מ- STL ..."
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1881
+#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1868
 msgid "Settings"
-msgstr ""
+msgstr "הגדרות"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:315
 msgid "Texture"
-msgstr ""
+msgstr "מרקם"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
 msgid "Load..."
-msgstr ""
+msgstr "טעינה..."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
-#: src/slic3r/GUI/Tab.cpp:3556
+#: src/slic3r/GUI/Tab.cpp:3533
 msgid "Remove"
-msgstr ""
+msgstr "הסרה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
 msgid "Not found:"
-msgstr ""
+msgstr "לא נמצא:"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:395
 msgid "Model"
-msgstr ""
+msgstr "מוֹדֵל"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:563
 msgid "Choose an STL file to import bed shape from:"
-msgstr ""
+msgstr "בחר קובץ STL ממנו ניתן לייבא צורת מיטה:"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
 #: src/slic3r/GUI/BedShapeDialog.cpp:642
 msgid "Invalid file format."
-msgstr ""
+msgstr "קובץ בפורמט שאינו נתמך"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:581
 msgid "Error! Invalid model"
-msgstr ""
+msgstr "שגיאה! מוֹדֵל לא תקין"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:589
 msgid "The selected file contains no geometry."
-msgstr ""
+msgstr "הקובץ הנבחר אינו מכיל גיאומטריה"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:593
 msgid ""
 "The selected file contains several disjoint areas. This is not supported."
-msgstr ""
+msgstr "הקובץ שנבחר מכיל כמה אזורים נפרדים. זה לא נתמך."
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:608
 msgid "Choose a file to import bed texture from (PNG/SVG):"
-msgstr ""
+msgstr "בחר קובץ"
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:631
 msgid "Choose an STL file to import bed model from:"
-msgstr ""
+msgstr "בחר קובץ STL לייבא ממנו צורת מיטה:"
 
-#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1330
+#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1314
 msgid "Bed Shape"
-msgstr ""
+msgstr "צורת מיטה"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:55
 msgid "Network lookup"
-msgstr ""
+msgstr "חיפוש ברשת"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:72
 msgid "Address"
-msgstr ""
+msgstr "כתובת"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:73
 msgid "Hostname"
-msgstr ""
+msgstr "שם מארח"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:74
 msgid "Service name"
-msgstr ""
+msgstr "שם השירות"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:76
 msgid "OctoPrint version"
-msgstr ""
+msgstr "גרסת OctoPrint"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:218
 msgid "Searching for devices"
-msgstr ""
+msgstr "מחפש מכשירים"
 
 #: src/slic3r/GUI/BonjourDialog.cpp:225
 msgid "Finished"
-msgstr ""
+msgstr "הסתיים"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:16
 msgid "Buttons And Text Colors Description"
-msgstr ""
+msgstr "כפתורים וצבעי טקסט תיאור"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:36
 msgid "Value is the same as the system value"
-msgstr ""
+msgstr "הערך זהה לערך המערכת"
 
 #: src/slic3r/GUI/ButtonsDescription.cpp:53
 msgid ""
 "Value was changed and is not equal to the system value or the last saved "
 "preset"
-msgstr ""
+msgstr "הערך השתנה ואינו שווה לערך המערכת או להגדרה המוגדרת מראש שנשמרה"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:47
 msgid ""
 "Zero layer height is not valid.\n"
 "\n"
 "The layer height will be reset to 0.01."
-msgstr ""
+msgstr "שכבה בגובה אפס אינה חוקית\n"
+"\n"
+"גובה השכבה יאופס ל 0.01."
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:48
 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
 msgid "Layer height"
-msgstr ""
+msgstr "גובה השכבה"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:59
 msgid ""
 "Zero first layer height is not valid.\n"
 "\n"
 "The first layer height will be reset to 0.01."
-msgstr ""
+msgstr "גובה 0 עבור שכבה ראשונה אינו חוקי\n"
+"\n"
+"גובה השכבה הראשונה יאופס ל 0.01."
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:1705
+#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:1693
 msgid "First layer height"
-msgstr ""
+msgstr "גובה שכבה ראשונה"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:82
 #, possible-c-format
@@ -395,11 +387,11 @@ msgstr ""
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:92
 msgid "Shall I adjust those settings in order to enable Spiral Vase?"
-msgstr ""
+msgstr "האם לשנות את ההגדרות הללו על מנת לאפשר מצב אגרטל ספירלי?"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:93
 msgid "Spiral Vase"
-msgstr ""
+msgstr "אגרטל ספירלי"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:143
 msgid ""
@@ -418,7 +410,7 @@ msgstr ""
 #: src/slic3r/GUI/ConfigManipulation.cpp:180
 #: src/slic3r/GUI/ConfigManipulation.cpp:226
 msgid "Wipe Tower"
-msgstr ""
+msgstr "מגדל ניגוב"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:176
 msgid ""
@@ -437,15 +429,15 @@ msgstr ""
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:222
 msgid " field? it's currently set to "
-msgstr ""
+msgstr " שדה? כרגע הוא מוגדר ל- "
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:223
 msgid " mm."
-msgstr ""
+msgstr " מ\"מ."
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:225
 msgid "Shall I add the '%'?"
-msgstr ""
+msgstr "האם להוסיף את '%'?"
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:257
 msgid ""
@@ -486,112 +478,112 @@ msgid "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigManipulation.cpp:335 src/slic3r/GUI/Plater.cpp:389
-#: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1876
-#: src/libslic3r/PrintConfig.cpp:2054
+#: src/libslic3r/PrintConfig.cpp:1721 src/libslic3r/PrintConfig.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:1953
 msgid "Infill"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:508
+#: src/slic3r/GUI/ConfigManipulation.cpp:502
 msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:510
+#: src/slic3r/GUI/ConfigManipulation.cpp:504
 msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:521
+#: src/slic3r/GUI/ConfigManipulation.cpp:515
 msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:523
+#: src/slic3r/GUI/ConfigManipulation.cpp:517
 msgid "Invalid pinhead diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
 msgid "Upgrade"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
 msgid "Downgrade"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
 msgid "Before roll back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
-#: src/libslic3r/PrintConfig.cpp:176
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
+#: src/libslic3r/PrintConfig.cpp:174
 msgid "User"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
-#: src/slic3r/GUI/GUI_Preview.cpp:256 src/libslic3r/ExtrusionEntity.cpp:270
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+#: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:270
 msgid "Unknown"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
 msgid "Active"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
 msgid "SuperSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1506
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1470
 msgid "print"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1508
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1472
 msgid "SLA print"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:697
-#: src/libslic3r/Preset.cpp:1509
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/slic3r/GUI/Plater.cpp:690
+#: src/libslic3r/Preset.cpp:1473
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1510
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1474
 msgid "printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1319
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1305
 msgid "vendor"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
 msgid "version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
 msgid "min SuperSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
 msgid "max SuperSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
 msgid "model"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
 msgid "variants"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:83
 #, possible-c-format
 msgid "Incompatible with this %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86
 msgid "Activate"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112
 msgid "Configuration Snapshots"
 msgstr ""
 
@@ -612,13 +604,13 @@ msgid "Standard"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:310 src/slic3r/GUI/ConfigWizard.cpp:606
-#: src/slic3r/GUI/Tab.cpp:3637 src/slic3r/GUI/UnsavedChangesDialog.cpp:928
+#: src/slic3r/GUI/Tab.cpp:3614 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
 msgid "All"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:311 src/slic3r/GUI/ConfigWizard.cpp:607
-#: src/slic3r/GUI/DoubleSlider.cpp:1853 src/slic3r/GUI/Plater.cpp:361
-#: src/slic3r/GUI/Plater.cpp:504
+#: src/slic3r/GUI/DoubleSlider.cpp:1935 src/slic3r/GUI/Plater.cpp:361
+#: src/slic3r/GUI/Plater.cpp:501
 msgid "None"
 msgstr ""
 
@@ -722,7 +714,7 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:108
+#: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:89
 msgid "Update built-in Presets automatically"
 msgstr ""
 
@@ -748,8 +740,8 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1174 src/slic3r/GUI/GUI_ObjectList.cpp:1808
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4519 src/slic3r/GUI/Plater.cpp:3145
-#: src/slic3r/GUI/Plater.cpp:3984 src/slic3r/GUI/Plater.cpp:4015
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464 src/slic3r/GUI/Plater.cpp:3100
+#: src/slic3r/GUI/Plater.cpp:3936 src/slic3r/GUI/Plater.cpp:3967
 msgid "Reload from disk"
 msgstr ""
 
@@ -766,23 +758,11 @@ msgid ""
 "using an open file dialog."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1191
-msgid "Files association"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1193 src/slic3r/GUI/Preferences.cpp:91
-msgid "Associate .3mf files to SuperSlicer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1194 src/slic3r/GUI/Preferences.cpp:98
-msgid "Associate .stl files to SuperSlicer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1205
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
 msgid "View mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1207
+#: src/slic3r/GUI/ConfigWizard.cpp:1191
 msgid ""
 "SuperSlicer's user interfaces comes in three variants:\n"
 "Simple, Advanced, and Expert.\n"
@@ -791,292 +771,289 @@ msgid ""
 "fine-tuning, they are suitable for advanced and expert users, respectively."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1212
+#: src/slic3r/GUI/ConfigWizard.cpp:1196
 msgid "Simple mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1213
+#: src/slic3r/GUI/ConfigWizard.cpp:1197
 msgid "Advanced mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1214
+#: src/slic3r/GUI/ConfigWizard.cpp:1198
 msgid "Expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1220
+#: src/slic3r/GUI/ConfigWizard.cpp:1204
 msgid "The size of the object can be specified in inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1221
+#: src/slic3r/GUI/ConfigWizard.cpp:1205
 msgid "Use inches"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1256
+#: src/slic3r/GUI/ConfigWizard.cpp:1240
 msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1260
+#: src/slic3r/GUI/ConfigWizard.cpp:1244
 #, possible-c-format
 msgid "Pick another vendor supported by %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1292
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
 msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1292
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
 msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1296
+#: src/slic3r/GUI/ConfigWizard.cpp:1280
 msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1330
+#: src/slic3r/GUI/ConfigWizard.cpp:1314
 msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1333
+#: src/slic3r/GUI/ConfigWizard.cpp:1317
 msgid "Set the shape of your printer's bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1353
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
 msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1353
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
 msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1367
+#: src/slic3r/GUI/ConfigWizard.cpp:1351
 msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1370
+#: src/slic3r/GUI/ConfigWizard.cpp:1354
 msgid "Nozzle Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1380
+#: src/slic3r/GUI/ConfigWizard.cpp:1364
 msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1381
+#: src/slic3r/GUI/ConfigWizard.cpp:1365
 msgid ""
 "Good precision is required, so use a caliper and do multiple measurements "
 "along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1384
+#: src/slic3r/GUI/ConfigWizard.cpp:1368
 msgid "Filament Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1413
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
 msgid "Nozzle and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1413
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
 msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1429
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
 msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1430
+#: src/slic3r/GUI/ConfigWizard.cpp:1414
 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1433
+#: src/slic3r/GUI/ConfigWizard.cpp:1417
 msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1434 src/slic3r/GUI/ConfigWizard.cpp:1448
-#: src/libslic3r/PrintConfig.cpp:242 src/libslic3r/PrintConfig.cpp:244
-#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:1077
-#: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1684
-#: src/libslic3r/PrintConfig.cpp:1752 src/libslic3r/PrintConfig.cpp:3675
+#: src/slic3r/GUI/ConfigWizard.cpp:1418 src/slic3r/GUI/ConfigWizard.cpp:1432
+#: src/libslic3r/PrintConfig.cpp:240 src/libslic3r/PrintConfig.cpp:242
+#: src/libslic3r/PrintConfig.cpp:469 src/libslic3r/PrintConfig.cpp:1065
+#: src/libslic3r/PrintConfig.cpp:1277 src/libslic3r/PrintConfig.cpp:1672
+#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:3568
 msgid "°C"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1443
+#: src/slic3r/GUI/ConfigWizard.cpp:1427
 msgid ""
 "Enter the bed temperature needed for getting your filament to stick to your "
 "heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1444
+#: src/slic3r/GUI/ConfigWizard.cpp:1428
 msgid ""
 "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
 "no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1447
+#: src/slic3r/GUI/ConfigWizard.cpp:1431
 msgid "Bed Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1887 src/slic3r/GUI/ConfigWizard.cpp:2629
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2586
 msgid "Filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1887 src/slic3r/GUI/ConfigWizard.cpp:2631
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2588
 msgid "SLA Materials"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1955
+#: src/slic3r/GUI/ConfigWizard.cpp:1934
 msgid "FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1960
+#: src/slic3r/GUI/ConfigWizard.cpp:1939
 msgid "SLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2279 src/slic3r/GUI/DoubleSlider.cpp:2236
-#: src/slic3r/GUI/DoubleSlider.cpp:2256 src/slic3r/GUI/GUI.cpp:260
+#: src/slic3r/GUI/ConfigWizard.cpp:2258 src/slic3r/GUI/DoubleSlider.cpp:2346
+#: src/slic3r/GUI/DoubleSlider.cpp:2366 src/slic3r/GUI/GUI.cpp:259
 msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2301
+#: src/slic3r/GUI/ConfigWizard.cpp:2278
 msgid "The following FFF printer models have no filament selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2305
+#: src/slic3r/GUI/ConfigWizard.cpp:2282
 msgid "Do you want to select default filaments for these FFF printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2319
+#: src/slic3r/GUI/ConfigWizard.cpp:2296
 msgid "The following SLA printer models have no materials selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2323
+#: src/slic3r/GUI/ConfigWizard.cpp:2300
 msgid "Do you want to select default SLA materials for these printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2572
+#: src/slic3r/GUI/ConfigWizard.cpp:2529
 msgid "Select all standard printers in this page"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2575
+#: src/slic3r/GUI/ConfigWizard.cpp:2532
 msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2576
+#: src/slic3r/GUI/ConfigWizard.cpp:2533
 msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2577
+#: src/slic3r/GUI/ConfigWizard.cpp:2534
 msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2578 src/slic3r/GUI/FirmwareDialog.cpp:151
+#: src/slic3r/GUI/ConfigWizard.cpp:2535 src/slic3r/GUI/FirmwareDialog.cpp:151
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:651
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
 msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2592
+#: src/slic3r/GUI/ConfigWizard.cpp:2549
 msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2595
+#: src/slic3r/GUI/ConfigWizard.cpp:2552
 msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2629
+#: src/slic3r/GUI/ConfigWizard.cpp:2586
 msgid "Filament Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2629 src/slic3r/GUI/ConfigWizard.cpp:2631
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4096
+#: src/slic3r/GUI/ConfigWizard.cpp:2586 src/slic3r/GUI/ConfigWizard.cpp:2588
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
 msgid "Type:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2631
+#: src/slic3r/GUI/ConfigWizard.cpp:2588
 msgid "SLA Material Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2743
+#: src/slic3r/GUI/ConfigWizard.cpp:2695
 msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2744
+#: src/slic3r/GUI/ConfigWizard.cpp:2696
 msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2746
+#: src/slic3r/GUI/ConfigWizard.cpp:2698
 msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2747
+#: src/slic3r/GUI/ConfigWizard.cpp:2699
 msgid "Configuration &Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:96
+#: src/slic3r/GUI/DoubleSlider.cpp:104
 msgid "Place bearings in slots and resume printing"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1215
+#: src/slic3r/GUI/DoubleSlider.cpp:1276
 msgid "One layer mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1217
+#: src/slic3r/GUI/DoubleSlider.cpp:1278
 msgid "Discard all custom changes"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1221 src/slic3r/GUI/DoubleSlider.cpp:1989
+#: src/slic3r/GUI/DoubleSlider.cpp:1283 src/slic3r/GUI/DoubleSlider.cpp:2076
 msgid "Jump to move"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1224
+#: src/slic3r/GUI/DoubleSlider.cpp:1287
 #, possible-c-format
 msgid ""
-"Jump to height %s\n"
-"Set ruler mode\n"
-"or Set extruder sequence for the entire print"
+"Jump to height %s Set ruler mode\n"
+" or Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1227
+#: src/slic3r/GUI/DoubleSlider.cpp:1289
 #, possible-c-format
-msgid ""
-"Jump to height %s\n"
-"or Set ruler mode"
+msgid "Jump to height %s or Set ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1232
+#: src/slic3r/GUI/DoubleSlider.cpp:1295
 msgid "Edit current color - Right click the colored slider segment"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1242
+#: src/slic3r/GUI/DoubleSlider.cpp:1305
 msgid "Print mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1256
+#: src/slic3r/GUI/DoubleSlider.cpp:1319
 msgid "Add extruder change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1258
+#: src/slic3r/GUI/DoubleSlider.cpp:1321
 msgid ""
 "Add color change - Left click for predefined color or Shift + Left click for "
 "custom color selection"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1260
+#: src/slic3r/GUI/DoubleSlider.cpp:1323
 msgid "Add color change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1261
+#: src/slic3r/GUI/DoubleSlider.cpp:1324
 msgid "or press \"+\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1263
+#: src/slic3r/GUI/DoubleSlider.cpp:1326
 msgid "Add another code - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1264
+#: src/slic3r/GUI/DoubleSlider.cpp:1327
 msgid "Add another code - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1270
+#: src/slic3r/GUI/DoubleSlider.cpp:1333
 msgid ""
 "The sequential print is on.\n"
 "It's impossible to apply any custom G-code for objects printing "
@@ -1084,294 +1061,294 @@ msgid ""
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1279
+#: src/slic3r/GUI/DoubleSlider.cpp:1342
 #, possible-c-format
 msgid "Color change (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1280
+#: src/slic3r/GUI/DoubleSlider.cpp:1343
 #, possible-c-format
 msgid "Color change (\"%1%\") for Extruder %2%"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1282
+#: src/slic3r/GUI/DoubleSlider.cpp:1345
 #, possible-c-format
 msgid "Pause print (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1284
+#: src/slic3r/GUI/DoubleSlider.cpp:1347
 #, possible-c-format
 msgid "Custom template (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1286
+#: src/slic3r/GUI/DoubleSlider.cpp:1349
 #, possible-c-format
 msgid "Extruder (tool) is changed to Extruder \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1293
+#: src/slic3r/GUI/DoubleSlider.cpp:1356
 msgid "Note"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1295
+#: src/slic3r/GUI/DoubleSlider.cpp:1358
 msgid ""
 "G-code associated to this tick mark is in a conflict with print mode.\n"
 "Editing it will cause changes of Slider data."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1298
+#: src/slic3r/GUI/DoubleSlider.cpp:1361
 msgid ""
 "There is a color change for extruder that won't be used till the end of "
 "print job.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1301
+#: src/slic3r/GUI/DoubleSlider.cpp:1364
 msgid ""
 "There is an extruder change set to the same extruder.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1304
+#: src/slic3r/GUI/DoubleSlider.cpp:1367
 msgid ""
 "There is a color change for extruder that has not been used before.\n"
 "Check your settings to avoid redundant color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1309
+#: src/slic3r/GUI/DoubleSlider.cpp:1372
 msgid "Delete tick mark - Left click or press \"-\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1311
+#: src/slic3r/GUI/DoubleSlider.cpp:1374
 msgid "Edit tick mark - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1312
+#: src/slic3r/GUI/DoubleSlider.cpp:1375
 msgid "Edit tick mark - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1412 src/slic3r/GUI/DoubleSlider.cpp:1446
+#: src/slic3r/GUI/DoubleSlider.cpp:1475 src/slic3r/GUI/DoubleSlider.cpp:1509
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1847
 #, possible-c-format
 msgid "Extruder %d"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1413 src/slic3r/GUI/GUI_ObjectList.cpp:1848
+#: src/slic3r/GUI/DoubleSlider.cpp:1476 src/slic3r/GUI/GUI_ObjectList.cpp:1848
 msgid "active"
-msgstr ""
+msgstr "פעיל"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1422
+#: src/slic3r/GUI/DoubleSlider.cpp:1485
 msgid "Switch code to Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1422 src/slic3r/GUI/GUI_ObjectList.cpp:1815
+#: src/slic3r/GUI/DoubleSlider.cpp:1485 src/slic3r/GUI/GUI_ObjectList.cpp:1815
 msgid "Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1423
+#: src/slic3r/GUI/DoubleSlider.cpp:1486
 msgid "Change extruder (N/A)"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1425
+#: src/slic3r/GUI/DoubleSlider.cpp:1488
 msgid "Use another extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1447
+#: src/slic3r/GUI/DoubleSlider.cpp:1510
 msgid "used"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1455
+#: src/slic3r/GUI/DoubleSlider.cpp:1518
 #, possible-c-format
 msgid "Switch code to Color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1456
+#: src/slic3r/GUI/DoubleSlider.cpp:1519
 #, possible-c-format
 msgid "Add color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1792
+#: src/slic3r/GUI/DoubleSlider.cpp:1870
 msgid "Add color change"
-msgstr ""
+msgstr "הוספת שינוי צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1802
+#: src/slic3r/GUI/DoubleSlider.cpp:1880
 msgid "Add pause print"
-msgstr ""
+msgstr "הוספת השהייה להדפסה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1806
+#: src/slic3r/GUI/DoubleSlider.cpp:1884
 msgid "Add custom template"
-msgstr ""
+msgstr "הוסף תבנית מותאמת אישית"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1809
+#: src/slic3r/GUI/DoubleSlider.cpp:1887
 msgid "Add custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1827
+#: src/slic3r/GUI/DoubleSlider.cpp:1905
 msgid "Edit color"
-msgstr ""
+msgstr "ערוך צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1828
+#: src/slic3r/GUI/DoubleSlider.cpp:1906
 msgid "Edit pause print message"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1829
+#: src/slic3r/GUI/DoubleSlider.cpp:1907
 msgid "Edit custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1835
+#: src/slic3r/GUI/DoubleSlider.cpp:1913
 msgid "Delete color change"
-msgstr ""
+msgstr "מחק שינוי צבע"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1836
+#: src/slic3r/GUI/DoubleSlider.cpp:1914
 msgid "Delete tool change"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1837
+#: src/slic3r/GUI/DoubleSlider.cpp:1915
 msgid "Delete pause print"
-msgstr ""
+msgstr "מחק את השהיית ההדפסה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1838
+#: src/slic3r/GUI/DoubleSlider.cpp:1916
 msgid "Delete custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1848 src/slic3r/GUI/DoubleSlider.cpp:1989
+#: src/slic3r/GUI/DoubleSlider.cpp:1926 src/slic3r/GUI/DoubleSlider.cpp:2076
+#: src/slic3r/GUI/DoubleSlider.cpp:2080
 msgid "Jump to height"
-msgstr ""
+msgstr "קפוץ לגובה"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1853
-msgid "Hide ruler"
+#: src/slic3r/GUI/DoubleSlider.cpp:1935
+msgid "Supprese show the ruler"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1857
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
 msgid "Show object height"
-msgstr ""
+msgstr "הראה גובה אובייקט"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1857
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
 msgid "Show object height on the ruler"
-msgstr ""
+msgstr "הצג את גובה האובייקט על הסרגל"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1861
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
 msgid "Show estimated print time"
-msgstr ""
+msgstr "הצג זמן הדפסה משוער"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1861
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
 msgid "Show estimated print time on the ruler"
-msgstr ""
+msgstr "הראה את זמן ההדפסה המשוער על הסרגל"
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1865
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
 msgid "Ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1865
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
 msgid "Set ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1870
+#: src/slic3r/GUI/DoubleSlider.cpp:1952
 msgid "Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1956
+#: src/slic3r/GUI/DoubleSlider.cpp:2038
 msgid "Enter custom G-code used on current layer"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1957
+#: src/slic3r/GUI/DoubleSlider.cpp:2039
 #, possible-c-format
 msgid "Custom G-code on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1972
+#: src/slic3r/GUI/DoubleSlider.cpp:2054
 msgid "Enter short message shown on Printer display when a print is paused"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1973
+#: src/slic3r/GUI/DoubleSlider.cpp:2055
 #, possible-c-format
 msgid "Message for pause print on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1988
+#: src/slic3r/GUI/DoubleSlider.cpp:2075
 msgid "Enter the move you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1988
+#: src/slic3r/GUI/DoubleSlider.cpp:2075 src/slic3r/GUI/DoubleSlider.cpp:2079
 msgid "Enter the height you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2230
+#: src/slic3r/GUI/DoubleSlider.cpp:2340
 msgid "The last color change data was saved for a single extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2231 src/slic3r/GUI/DoubleSlider.cpp:2246
+#: src/slic3r/GUI/DoubleSlider.cpp:2341 src/slic3r/GUI/DoubleSlider.cpp:2356
 msgid "The last color change data was saved for a multi extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2233
+#: src/slic3r/GUI/DoubleSlider.cpp:2343
 msgid "Your current changes will delete all saved color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2234 src/slic3r/GUI/DoubleSlider.cpp:2254
+#: src/slic3r/GUI/DoubleSlider.cpp:2344 src/slic3r/GUI/DoubleSlider.cpp:2364
 msgid "Are you sure you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2247
+#: src/slic3r/GUI/DoubleSlider.cpp:2357
 msgid ""
 "Select YES if you want to delete all saved tool changes, \n"
 "NO if you want all tool changes switch to color changes, \n"
 "or CANCEL to leave it unchanged."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2250
+#: src/slic3r/GUI/DoubleSlider.cpp:2360
 msgid "Do you want to delete all saved tool changes?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2252
+#: src/slic3r/GUI/DoubleSlider.cpp:2362
 msgid ""
 "The last color change data was saved for a multi extruder printing with tool "
 "changes for whole print."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2253
+#: src/slic3r/GUI/DoubleSlider.cpp:2363
 msgid "Your current changes will delete all saved extruder (tool) changes."
 msgstr ""
 
 #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:506
 #: src/slic3r/GUI/GUI_ObjectList.cpp:518
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1012
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4534
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4544
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4579
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4479
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4489
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4524
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:499
-#: src/libslic3r/PrintConfig.cpp:1014
 msgid "default"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:24
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
 msgid "Set extruder sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:40
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
 msgid "Set extruder change for every"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53
-#: src/libslic3r/PrintConfig.cpp:638 src/libslic3r/PrintConfig.cpp:1892
-#: src/libslic3r/PrintConfig.cpp:2851 src/libslic3r/PrintConfig.cpp:3086
-#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3508
-#: src/libslic3r/PrintConfig.cpp:3556
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
+#: src/libslic3r/PrintConfig.cpp:623 src/libslic3r/PrintConfig.cpp:1869
+#: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2982
+#: src/libslic3r/PrintConfig.cpp:3143 src/libslic3r/PrintConfig.cpp:3401
+#: src/libslic3r/PrintConfig.cpp:3449
 msgid "layers"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:137
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
 msgid "Set extruder(tool) sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:183
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
 msgid "Remove extruder from sequence"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:193
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
 msgid "Add extruder to sequence"
 msgstr ""
 
@@ -1383,8 +1360,8 @@ msgstr ""
 msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:199 src/slic3r/GUI/OptionsGroup.cpp:853
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:881
+#: src/slic3r/GUI/Field.cpp:199 src/slic3r/GUI/OptionsGroup.cpp:848
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
 msgid "N/A"
 msgstr ""
 
@@ -1393,17 +1370,17 @@ msgstr ""
 msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:241 src/slic3r/GUI/Field.cpp:277
-#: src/slic3r/GUI/Field.cpp:1513 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
+#: src/slic3r/GUI/Field.cpp:241 src/slic3r/GUI/Field.cpp:272
+#: src/slic3r/GUI/Field.cpp:1484 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
 msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:250 src/slic3r/GUI/Field.cpp:288
-#: src/slic3r/GUI/Field.cpp:1525
+#: src/slic3r/GUI/Field.cpp:250 src/slic3r/GUI/Field.cpp:283
+#: src/slic3r/GUI/Field.cpp:1496
 msgid "Input value is out of range"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:304
+#: src/slic3r/GUI/Field.cpp:297
 #, possible-c-format
 msgid ""
 "Do you mean %s%% instead of %s %s?\n"
@@ -1411,7 +1388,7 @@ msgid ""
 "or NO if you are sure that %s %s is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:307
+#: src/slic3r/GUI/Field.cpp:300
 msgid "Parameter validation"
 msgstr ""
 
@@ -1523,7 +1500,7 @@ msgstr ""
 
 #: src/slic3r/GUI/FirmwareDialog.cpp:852
 #: src/slic3r/GUI/Mouse3DController.cpp:552
-#: src/slic3r/GUI/PrintHostDialogs.cpp:191
+#: src/slic3r/GUI/PrintHostDialogs.cpp:189
 msgid "Close"
 msgstr ""
 
@@ -1545,519 +1522,508 @@ msgstr ""
 msgid "Tool position"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1043
+#: src/slic3r/GUI/GCodeViewer.cpp:1033
 msgid "Generating toolpaths"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1432
+#: src/slic3r/GUI/GCodeViewer.cpp:1424
 msgid "Generating vertex buffer"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1517
+#: src/slic3r/GUI/GCodeViewer.cpp:1505
 msgid "Generating index buffers"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2252
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
 msgid "Click to hide"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2252
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
 msgid "Click to show"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2381
+#: src/slic3r/GUI/GCodeViewer.cpp:2369
 msgid "up to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2387
+#: src/slic3r/GUI/GCodeViewer.cpp:2375
 msgid "above"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2395
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
 msgid "from"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2395
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
 msgid "to"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2423 src/slic3r/GUI/GCodeViewer.cpp:2431
-#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:992
+#: src/slic3r/GUI/GCodeViewer.cpp:2411 src/slic3r/GUI/GCodeViewer.cpp:2419
+#: src/slic3r/GUI/GUI_Preview.cpp:250
 msgid "Feature type"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2423 src/slic3r/GUI/GCodeViewer.cpp:2431
+#: src/slic3r/GUI/GCodeViewer.cpp:2411 src/slic3r/GUI/GCodeViewer.cpp:2419
 #: src/slic3r/GUI/RammingChart.cpp:76
 msgid "Time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2431
+#: src/slic3r/GUI/GCodeViewer.cpp:2419
 msgid "Percentage"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2434
+#: src/slic3r/GUI/GCodeViewer.cpp:2422
 msgid "Height (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2435
+#: src/slic3r/GUI/GCodeViewer.cpp:2423
 msgid "Width (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2436
+#: src/slic3r/GUI/GCodeViewer.cpp:2424
 msgid "Speed (mm/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2437
+#: src/slic3r/GUI/GCodeViewer.cpp:2425
 msgid "Fan Speed (%)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2438
+#: src/slic3r/GUI/GCodeViewer.cpp:2426
 msgid "Layer Time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2439
+#: src/slic3r/GUI/GCodeViewer.cpp:2427
 msgid "Layer Time (log)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2440 src/slic3r/GUI/GUI_Preview.cpp:243
+#: src/slic3r/GUI/GCodeViewer.cpp:2428 src/slic3r/GUI/GUI_Preview.cpp:257
 msgid "Chronology"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2441
+#: src/slic3r/GUI/GCodeViewer.cpp:2429
 msgid "Volumetric flow rate (mm³/s)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2442 src/slic3r/GUI/GUI_Preview.cpp:245
-#: src/slic3r/GUI/GUI_Preview.cpp:906 src/slic3r/GUI/GUI_Preview.cpp:992
+#: src/slic3r/GUI/GCodeViewer.cpp:2430 src/slic3r/GUI/GUI_Preview.cpp:259
+#: src/slic3r/GUI/GUI_Preview.cpp:878
 msgid "Tool"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2443 src/slic3r/GUI/GCodeViewer.cpp:2492
-#: src/slic3r/GUI/GCodeViewer.cpp:2790 src/slic3r/GUI/GCodeViewer.cpp:2820
-#: src/slic3r/GUI/GUI_Preview.cpp:246 src/slic3r/GUI/Plater.cpp:695
+#: src/slic3r/GUI/GCodeViewer.cpp:2431 src/slic3r/GUI/GCodeViewer.cpp:2480
+#: src/slic3r/GUI/GCodeViewer.cpp:2758 src/slic3r/GUI/GCodeViewer.cpp:2788
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/Plater.cpp:688
 msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2444 src/slic3r/GUI/GUI_Preview.cpp:247
-#: src/slic3r/GUI/GUI_Preview.cpp:991
+#: src/slic3r/GUI/GCodeViewer.cpp:2432 src/slic3r/GUI/GUI_Preview.cpp:261
 msgid "Color Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2445 src/libslic3r/PrintConfig.cpp:3671
-#: src/libslic3r/PrintConfig.cpp:3682
+#: src/slic3r/GUI/GCodeViewer.cpp:2433 src/libslic3r/PrintConfig.cpp:3564
+#: src/libslic3r/PrintConfig.cpp:3575
 msgid "Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2484 src/slic3r/GUI/GCodeViewer.cpp:2527
-#: src/slic3r/GUI/GCodeViewer.cpp:2532 src/slic3r/GUI/GUI_ObjectList.cpp:306
-#: src/slic3r/GUI/wxExtensions.cpp:520 src/libslic3r/PrintConfig.cpp:1009
+#: src/slic3r/GUI/GCodeViewer.cpp:2472 src/slic3r/GUI/GCodeViewer.cpp:2515
+#: src/slic3r/GUI/GCodeViewer.cpp:2520 src/slic3r/GUI/GUI_ObjectList.cpp:306
+#: src/slic3r/GUI/wxExtensions.cpp:516 src/libslic3r/PrintConfig.cpp:997
 msgid "Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2503
+#: src/slic3r/GUI/GCodeViewer.cpp:2491
 msgid "Default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2527
+#: src/slic3r/GUI/GCodeViewer.cpp:2515
 msgid "default color"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2622 src/slic3r/GUI/GCodeViewer.cpp:2668
+#: src/slic3r/GUI/GCodeViewer.cpp:2610 src/slic3r/GUI/GCodeViewer.cpp:2656
 msgid "Color change"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2641 src/slic3r/GUI/GCodeViewer.cpp:2666
+#: src/slic3r/GUI/GCodeViewer.cpp:2629 src/slic3r/GUI/GCodeViewer.cpp:2654
 msgid "Print"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2667 src/slic3r/GUI/GCodeViewer.cpp:2684
-#: src/slic3r/GUI/GUI_Preview.cpp:1079
+#: src/slic3r/GUI/GCodeViewer.cpp:2655 src/slic3r/GUI/GCodeViewer.cpp:2672
+#: src/slic3r/GUI/GUI_Preview.cpp:1031
 msgid "Pause"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2672 src/slic3r/GUI/GCodeViewer.cpp:2675
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
 msgid "Event"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2672 src/slic3r/GUI/GCodeViewer.cpp:2675
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
 msgid "Remaining time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2675
+#: src/slic3r/GUI/GCodeViewer.cpp:2663
 msgid "Duration"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2710 src/slic3r/GUI/GUI_Preview.cpp:1073
-#: src/libslic3r/PrintConfig.cpp:3855
+#: src/slic3r/GUI/GCodeViewer.cpp:2698 src/slic3r/GUI/GUI_Preview.cpp:1026
+#: src/libslic3r/PrintConfig.cpp:3748
 msgid "Travel"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2713
+#: src/slic3r/GUI/GCodeViewer.cpp:2701
 msgid "Movement"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2714
+#: src/slic3r/GUI/GCodeViewer.cpp:2702
 msgid "Extrusion"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2715 src/slic3r/GUI/Tab.cpp:2101
+#: src/slic3r/GUI/GCodeViewer.cpp:2703 src/slic3r/GUI/Tab.cpp:2083
 msgid "Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2732 src/slic3r/GUI/GCodeViewer.cpp:2735
-#: src/slic3r/GUI/GUI_Preview.cpp:1074
-msgid "Wipe"
-msgstr ""
-
-#: src/slic3r/GUI/GCodeViewer.cpp:2766 src/slic3r/GUI/GUI_Preview.cpp:277
-#: src/slic3r/GUI/GUI_Preview.cpp:291
+#: src/slic3r/GUI/GCodeViewer.cpp:2734 src/slic3r/GUI/GUI_Preview.cpp:291
+#: src/slic3r/GUI/GUI_Preview.cpp:304
 msgid "Options"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2769 src/slic3r/GUI/GUI_Preview.cpp:1075
+#: src/slic3r/GUI/GCodeViewer.cpp:2737 src/slic3r/GUI/GUI_Preview.cpp:1027
 msgid "Retractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2770 src/slic3r/GUI/GUI_Preview.cpp:1076
+#: src/slic3r/GUI/GCodeViewer.cpp:2738 src/slic3r/GUI/GUI_Preview.cpp:1028
 msgid "Deretractions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2771 src/slic3r/GUI/GUI_Preview.cpp:1077
+#: src/slic3r/GUI/GCodeViewer.cpp:2739 src/slic3r/GUI/GUI_Preview.cpp:1029
 msgid "Tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2772 src/slic3r/GUI/GUI_Preview.cpp:1078
+#: src/slic3r/GUI/GCodeViewer.cpp:2740 src/slic3r/GUI/GUI_Preview.cpp:1030
 msgid "Color changes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2773 src/slic3r/GUI/GUI_Preview.cpp:1079
+#: src/slic3r/GUI/GCodeViewer.cpp:2741 src/slic3r/GUI/GUI_Preview.cpp:1031
 msgid "Print pauses"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2774 src/slic3r/GUI/GUI_Preview.cpp:1080
+#: src/slic3r/GUI/GCodeViewer.cpp:2742 src/slic3r/GUI/GUI_Preview.cpp:1032
 msgid "Custom G-codes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2785 src/slic3r/GUI/GCodeViewer.cpp:2809
-#: src/slic3r/GUI/Plater.cpp:698 src/libslic3r/PrintConfig.cpp:158
+#: src/slic3r/GUI/GCodeViewer.cpp:2753 src/slic3r/GUI/GCodeViewer.cpp:2777
+#: src/slic3r/GUI/Plater.cpp:691 src/libslic3r/PrintConfig.cpp:156
 msgid "Printer"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2787 src/slic3r/GUI/GCodeViewer.cpp:2814
-#: src/slic3r/GUI/Plater.cpp:694
+#: src/slic3r/GUI/GCodeViewer.cpp:2755 src/slic3r/GUI/GCodeViewer.cpp:2782
+#: src/slic3r/GUI/Plater.cpp:687
 msgid "Print settings"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2845 src/slic3r/GUI/GCodeViewer.cpp:2850
-#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1136
-#: src/slic3r/GUI/Plater.cpp:1249
+#: src/slic3r/GUI/GCodeViewer.cpp:2813 src/slic3r/GUI/GCodeViewer.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1129
+#: src/slic3r/GUI/Plater.cpp:1242
 msgid "Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2845
+#: src/slic3r/GUI/GCodeViewer.cpp:2813
 msgid "Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2850
+#: src/slic3r/GUI/GCodeViewer.cpp:2818
 msgid "Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2877
+#: src/slic3r/GUI/GCodeViewer.cpp:2845
 msgid "Show stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:2881
+#: src/slic3r/GUI/GCodeViewer.cpp:2849
 msgid "Show normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:229 src/slic3r/GUI/GLCanvas3D.cpp:4609
+#: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4494
 msgid "Variable layer height"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:231
+#: src/slic3r/GUI/GLCanvas3D.cpp:230
 msgid "Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:233
+#: src/slic3r/GUI/GLCanvas3D.cpp:232
 msgid "Add detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:235
+#: src/slic3r/GUI/GLCanvas3D.cpp:234
 msgid "Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:237
+#: src/slic3r/GUI/GLCanvas3D.cpp:236
 msgid "Remove detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:239
+#: src/slic3r/GUI/GLCanvas3D.cpp:238
 msgid "Shift + Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:241
+#: src/slic3r/GUI/GLCanvas3D.cpp:240
 msgid "Reset to base"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:243
+#: src/slic3r/GUI/GLCanvas3D.cpp:242
 msgid "Shift + Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:245
+#: src/slic3r/GUI/GLCanvas3D.cpp:244
 msgid "Smoothing"
-msgstr ""
+msgstr "הַחלָקָה"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:247
+#: src/slic3r/GUI/GLCanvas3D.cpp:246
 msgid "Mouse wheel:"
-msgstr ""
+msgstr "גלגלת העכבר:"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:249
+#: src/slic3r/GUI/GLCanvas3D.cpp:248
 msgid "Increase/decrease edit area"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:252
+#: src/slic3r/GUI/GLCanvas3D.cpp:251
 msgid "Adaptive"
-msgstr ""
+msgstr "מסתגל"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:258
+#: src/slic3r/GUI/GLCanvas3D.cpp:257
 msgid "Quality / Speed"
-msgstr ""
+msgstr "איכות / מהירות"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:261
+#: src/slic3r/GUI/GLCanvas3D.cpp:260
 msgid "Higher print quality versus higher print speed."
-msgstr ""
+msgstr "איכות הדפסה גבוהה יותר לעומת מהירות הדפסה גבוהה יותר."
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:272
+#: src/slic3r/GUI/GLCanvas3D.cpp:271
 msgid "Smooth"
-msgstr ""
+msgstr "החלקה"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:278 src/libslic3r/PrintConfig.cpp:1039
+#: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:1027
 msgid "Radius"
-msgstr ""
+msgstr "קוטר"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:288
+#: src/slic3r/GUI/GLCanvas3D.cpp:287
 msgid "Keep min"
-msgstr ""
+msgstr "שמור מינימום"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:297 src/slic3r/GUI/GLCanvas3D.cpp:4025
+#: src/slic3r/GUI/GLCanvas3D.cpp:296 src/slic3r/GUI/GLCanvas3D.cpp:3908
 msgid "Reset"
-msgstr ""
+msgstr "אִתחוּל"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:562
+#: src/slic3r/GUI/GLCanvas3D.cpp:561
 msgid "Variable layer height - Manual edit"
-msgstr ""
+msgstr "גובה שכבה משתנה - עריכה ידנית"
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:630
+#: src/slic3r/GUI/GLCanvas3D.cpp:629
 msgid "An object outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:631
+#: src/slic3r/GUI/GLCanvas3D.cpp:630
 msgid "A toolpath outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:632
+#: src/slic3r/GUI/GLCanvas3D.cpp:631
 msgid "SLA supports outside the print area were detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:633
+#: src/slic3r/GUI/GLCanvas3D.cpp:632
 msgid "Some objects are not visible."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:635
+#: src/slic3r/GUI/GLCanvas3D.cpp:634
 msgid ""
 "An object outside the print area was detected.\n"
 "Resolve the current problem to continue slicing."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:950
+#: src/slic3r/GUI/GLCanvas3D.cpp:949
 msgid "Seq."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1454
+#: src/slic3r/GUI/GLCanvas3D.cpp:1424
 msgid "Variable layer height - Reset"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1462
+#: src/slic3r/GUI/GLCanvas3D.cpp:1432
 msgid "Variable layer height - Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1470
+#: src/slic3r/GUI/GLCanvas3D.cpp:1440
 msgid "Variable layer height - Smooth all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1876
+#: src/slic3r/GUI/GLCanvas3D.cpp:1839
 msgid "Mirror Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2757
+#: src/slic3r/GUI/GLCanvas3D.cpp:2684
 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
 msgid "Gizmo-Move"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2843
+#: src/slic3r/GUI/GLCanvas3D.cpp:2762
 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
 msgid "Gizmo-Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3364
+#: src/slic3r/GUI/GLCanvas3D.cpp:3279
 msgid "Move Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3833 src/slic3r/GUI/GLCanvas3D.cpp:4570
+#: src/slic3r/GUI/GLCanvas3D.cpp:3744 src/slic3r/GUI/GLCanvas3D.cpp:4455
 msgid "Switch to Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3834 src/slic3r/GUI/GLCanvas3D.cpp:4570
+#: src/slic3r/GUI/GLCanvas3D.cpp:3745 src/slic3r/GUI/GLCanvas3D.cpp:4455
 msgid "Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3835 src/slic3r/GUI/GLCanvas3D.cpp:4571
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
 msgid "Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3835 src/slic3r/GUI/GLCanvas3D.cpp:4571
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
 msgid "Material Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3836 src/slic3r/GUI/GLCanvas3D.cpp:4572
+#: src/slic3r/GUI/GLCanvas3D.cpp:3747 src/slic3r/GUI/GLCanvas3D.cpp:4457
 msgid "Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3884
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
 msgid "Undo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3884
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
 msgid "Redo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3905
+#: src/slic3r/GUI/GLCanvas3D.cpp:3816
 #, possible-c-format
 msgid "Undo %1$d Action"
 msgid_plural "Undo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3905
+#: src/slic3r/GUI/GLCanvas3D.cpp:3816
 #, possible-c-format
 msgid "Redo %1$d Action"
 msgid_plural "Redo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3925 src/slic3r/GUI/GLCanvas3D.cpp:4588
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:126 src/slic3r/GUI/Search.cpp:351
+#: src/slic3r/GUI/GLCanvas3D.cpp:3836 src/slic3r/GUI/GLCanvas3D.cpp:4473
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Search.cpp:426
 msgid "Search"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3939 src/slic3r/GUI/GLCanvas3D.cpp:3947
-#: src/slic3r/GUI/Search.cpp:358
+#: src/slic3r/GUI/GLCanvas3D.cpp:3850 src/slic3r/GUI/GLCanvas3D.cpp:3858
+#: src/slic3r/GUI/Search.cpp:433
 msgid "Enter a search term"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3978
+#: src/slic3r/GUI/GLCanvas3D.cpp:3889
 msgid "Arrange options"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4008
-#, possible-c-format
-msgid "Use %1%left mouse key to enter text edit mode:"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4010
-msgid "Spacing"
+#: src/slic3r/GUI/GLCanvas3D.cpp:3896
+msgid "Gap size"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4017
-msgid "Enable rotations (slow)"
+#: src/slic3r/GUI/GLCanvas3D.cpp:3901
+msgid "Enable rotations"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4035 src/slic3r/GUI/GLCanvas3D.cpp:4480
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:148 src/slic3r/GUI/Plater.cpp:1674
+#: src/slic3r/GUI/GLCanvas3D.cpp:3920 src/slic3r/GUI/GLCanvas3D.cpp:4365
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Plater.cpp:1657
 msgid "Arrange"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4454
+#: src/slic3r/GUI/GLCanvas3D.cpp:4339
 msgid "Add..."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4462 src/slic3r/GUI/GUI_ObjectList.cpp:1861
-#: src/slic3r/GUI/Plater.cpp:3981 src/slic3r/GUI/Plater.cpp:4005
-#: src/slic3r/GUI/Tab.cpp:3556
+#: src/slic3r/GUI/GLCanvas3D.cpp:4347 src/slic3r/GUI/GUI_ObjectList.cpp:1861
+#: src/slic3r/GUI/Plater.cpp:3933 src/slic3r/GUI/Plater.cpp:3957
+#: src/slic3r/GUI/Tab.cpp:3533
 msgid "Delete"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4471 src/slic3r/GUI/KBShortcutsDialog.cpp:116
-#: src/slic3r/GUI/Plater.cpp:5096
+#: src/slic3r/GUI/GLCanvas3D.cpp:4356 src/slic3r/GUI/KBShortcutsDialog.cpp:116
+#: src/slic3r/GUI/Plater.cpp:4863
 msgid "Delete all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4480 src/slic3r/GUI/KBShortcutsDialog.cpp:149
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365 src/slic3r/GUI/KBShortcutsDialog.cpp:144
 msgid "Arrange selection"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4480
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365
 msgid "Click right mouse button to show arrangement options"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4502
+#: src/slic3r/GUI/GLCanvas3D.cpp:4387
 msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4511
+#: src/slic3r/GUI/GLCanvas3D.cpp:4396
 msgid "Paste"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4523 src/slic3r/GUI/Plater.cpp:3840
-#: src/slic3r/GUI/Plater.cpp:3852 src/slic3r/GUI/Plater.cpp:3990
+#: src/slic3r/GUI/GLCanvas3D.cpp:4408 src/slic3r/GUI/Plater.cpp:3792
+#: src/slic3r/GUI/Plater.cpp:3804 src/slic3r/GUI/Plater.cpp:3942
 msgid "Add instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4534 src/slic3r/GUI/Plater.cpp:3992
+#: src/slic3r/GUI/GLCanvas3D.cpp:4419 src/slic3r/GUI/Plater.cpp:3944
 msgid "Remove instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4547
+#: src/slic3r/GUI/GLCanvas3D.cpp:4432
 msgid "Split to objects"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4557 src/slic3r/GUI/GUI_ObjectList.cpp:1633
+#: src/slic3r/GUI/GLCanvas3D.cpp:4442 src/slic3r/GUI/GUI_ObjectList.cpp:1633
 msgid "Split to parts"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4659 src/slic3r/GUI/KBShortcutsDialog.cpp:117
-#: src/slic3r/GUI/MainFrame.cpp:1138
+#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/KBShortcutsDialog.cpp:117
+#: src/slic3r/GUI/MainFrame.cpp:1139
 msgid "Undo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4659 src/slic3r/GUI/GLCanvas3D.cpp:4698
+#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/GLCanvas3D.cpp:4583
 msgid "Click right mouse button to open/close History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4682
+#: src/slic3r/GUI/GLCanvas3D.cpp:4567
 #, possible-c-format
 msgid "Next Undo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4698 src/slic3r/GUI/KBShortcutsDialog.cpp:118
-#: src/slic3r/GUI/MainFrame.cpp:1141
+#: src/slic3r/GUI/GLCanvas3D.cpp:4583 src/slic3r/GUI/KBShortcutsDialog.cpp:118
+#: src/slic3r/GUI/MainFrame.cpp:1142
 msgid "Redo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4720
+#: src/slic3r/GUI/GLCanvas3D.cpp:4605
 #, possible-c-format
 msgid "Next Redo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:6348
+#: src/slic3r/GUI/GLCanvas3D.cpp:6233
 msgid "Selection-Add from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:6367
+#: src/slic3r/GUI/GLCanvas3D.cpp:6252
 msgid "Selection-Remove from rectangle"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:5823
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:5715
 msgid "Cut"
 msgstr ""
 
@@ -2228,7 +2194,7 @@ msgid "Quality"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
-#: src/libslic3r/PrintConfig.cpp:4944
+#: src/libslic3r/PrintConfig.cpp:4837
 msgid "Closing distance"
 msgstr ""
 
@@ -2284,7 +2250,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
-#: src/libslic3r/PrintConfig.cpp:5875
+#: src/libslic3r/PrintConfig.cpp:5767
 msgid "Rotate"
 msgstr ""
 
@@ -2292,7 +2258,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:548
 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:564
-#: src/libslic3r/PrintConfig.cpp:5890
+#: src/libslic3r/PrintConfig.cpp:5782
 msgid "Scale"
 msgstr ""
 
@@ -2342,7 +2308,7 @@ msgid "Minimal points distance"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
-#: src/libslic3r/PrintConfig.cpp:4774
+#: src/libslic3r/PrintConfig.cpp:4667
 msgid "Support points density"
 msgstr ""
 
@@ -2408,7 +2374,7 @@ msgid "Are you sure you want to do it?"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129
-#: src/slic3r/GUI/GUI.cpp:272 src/slic3r/GUI/PhysicalPrinterDialog.cpp:598
+#: src/slic3r/GUI/GUI.cpp:271 src/slic3r/GUI/PhysicalPrinterDialog.cpp:598
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:622
 #: src/slic3r/GUI/WipeTowerDialog.cpp:45
 #: src/slic3r/GUI/WipeTowerDialog.cpp:366
@@ -2569,7 +2535,7 @@ msgstr ""
 msgid "Start the application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:583
+#: src/slic3r/GUI/GUI_App.cpp:584
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
@@ -2577,230 +2543,231 @@ msgid ""
 "and we would be glad if you reported it.\n"
 "\n"
 "The application will now terminate."
-msgstr ""
+msgstr "%s נתקל בשגיאה. זה ככל הנראה נגרם על ידי שגיאת חוסר מקום האם בוודאות יש מספיק זיכרון זמני (RAM) במערכת? זה גם יכול להיות תקלה ואודה לדיווחים עליה.\n"
+"\n"
+"The application will now terminate."
 
-#: src/slic3r/GUI/GUI_App.cpp:586
+#: src/slic3r/GUI/GUI_App.cpp:587
 msgid "Fatal error"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:706
+#: src/slic3r/GUI/GUI_App.cpp:707
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:712
+#: src/slic3r/GUI/GUI_App.cpp:713
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:766
+#: src/slic3r/GUI/GUI_App.cpp:767
 #, possible-c-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:768 src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+#: src/slic3r/GUI/GUI_App.cpp:769 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:803
+#: src/slic3r/GUI/GUI_App.cpp:804
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:872
+#: src/slic3r/GUI/GUI_App.cpp:863
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1117
+#: src/slic3r/GUI/GUI_App.cpp:1108
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1121
+#: src/slic3r/GUI/GUI_App.cpp:1112
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1123
+#: src/slic3r/GUI/GUI_App.cpp:1114
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
+#: src/slic3r/GUI/GUI_App.cpp:1117
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1139 src/slic3r/GUI/GUI_App.cpp:1150
+#: src/slic3r/GUI/GUI_App.cpp:1130 src/slic3r/GUI/GUI_App.cpp:1141
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1155
+#: src/slic3r/GUI/GUI_App.cpp:1146
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1160
+#: src/slic3r/GUI/GUI_App.cpp:1151
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1312
+#: src/slic3r/GUI/GUI_App.cpp:1303
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1324
+#: src/slic3r/GUI/GUI_App.cpp:1315
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1336
+#: src/slic3r/GUI/GUI_App.cpp:1327
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1347
+#: src/slic3r/GUI/GUI_App.cpp:1338
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1414
+#: src/slic3r/GUI/GUI_App.cpp:1388
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1414
+#: src/slic3r/GUI/GUI_App.cpp:1388
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1544
+#: src/slic3r/GUI/GUI_App.cpp:1518
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1593
+#: src/slic3r/GUI/GUI_App.cpp:1567
 #, possible-c-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1597
+#: src/slic3r/GUI/GUI_App.cpp:1571
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1597
+#: src/slic3r/GUI/GUI_App.cpp:1571
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1598
+#: src/slic3r/GUI/GUI_App.cpp:1572
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1598
+#: src/slic3r/GUI/GUI_App.cpp:1572
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1599
+#: src/slic3r/GUI/GUI_App.cpp:1573
 msgid "Check for updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1599
+#: src/slic3r/GUI/GUI_App.cpp:1573
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1602
+#: src/slic3r/GUI/GUI_App.cpp:1576
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1608
+#: src/slic3r/GUI/GUI_App.cpp:1582
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1613 src/slic3r/GUI/wxExtensions.cpp:678
+#: src/slic3r/GUI/GUI_App.cpp:1587 src/slic3r/GUI/wxExtensions.cpp:674
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1613
+#: src/slic3r/GUI/GUI_App.cpp:1587
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1615
+#: src/slic3r/GUI/GUI_App.cpp:1589
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1616 src/slic3r/GUI/wxExtensions.cpp:681
+#: src/slic3r/GUI/GUI_App.cpp:1590 src/slic3r/GUI/wxExtensions.cpp:677
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1616
+#: src/slic3r/GUI/GUI_App.cpp:1590
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1621
+#: src/slic3r/GUI/GUI_App.cpp:1595
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1621
+#: src/slic3r/GUI/GUI_App.cpp:1595
 #, possible-c-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1624
+#: src/slic3r/GUI/GUI_App.cpp:1598
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1627
+#: src/slic3r/GUI/GUI_App.cpp:1601
 msgid "Flash printer &firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1627
+#: src/slic3r/GUI/GUI_App.cpp:1601
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1643
+#: src/slic3r/GUI/GUI_App.cpp:1617
 msgid "Taking configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1643
+#: src/slic3r/GUI/GUI_App.cpp:1617
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1719
+#: src/slic3r/GUI/GUI_App.cpp:1679
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1721
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1723
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1750
+#: src/slic3r/GUI/GUI_App.cpp:1710
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1781
+#: src/slic3r/GUI/GUI_App.cpp:1741
 msgid "The preset(s) modifications are successfully saved"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1992 src/slic3r/GUI/Tab.cpp:3310
+#: src/slic3r/GUI/GUI_App.cpp:1941 src/slic3r/GUI/Tab.cpp:3287
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1993
+#: src/slic3r/GUI/GUI_App.cpp:1942
 msgid "Please check and fix your object list."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1994 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
-#: src/slic3r/GUI/Plater.cpp:2387 src/slic3r/GUI/Tab.cpp:3312
+#: src/slic3r/GUI/GUI_App.cpp:1943 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
+#: src/slic3r/GUI/Plater.cpp:2343 src/slic3r/GUI/Tab.cpp:3289
 msgid "Attention!"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:1960
 msgid "Select a gcode file:"
 msgstr ""
 
@@ -2920,7 +2887,7 @@ msgid "Rename Sub-object"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1212
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4324
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4269
 msgid "Instances to Separated Objects"
 msgstr ""
 
@@ -3010,12 +2977,12 @@ msgstr ""
 msgid "Fix through the Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1801 src/slic3r/GUI/Plater.cpp:4018
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1801 src/slic3r/GUI/Plater.cpp:3970
 msgid "Export as STL"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1808
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4519 src/slic3r/GUI/Plater.cpp:3984
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464 src/slic3r/GUI/Plater.cpp:3936
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
@@ -3023,9 +2990,9 @@ msgstr ""
 msgid "Set extruder for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1847 src/libslic3r/PrintConfig.cpp:607
-#: src/libslic3r/PrintConfig.cpp:791 src/libslic3r/PrintConfig.cpp:1718
-#: src/libslic3r/PrintConfig.cpp:2761 src/libslic3r/PrintConfig.cpp:3630
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1847 src/libslic3r/PrintConfig.cpp:592
+#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:1706
+#: src/libslic3r/PrintConfig.cpp:2661 src/libslic3r/PrintConfig.cpp:3523
 msgid "Default"
 msgstr ""
 
@@ -3037,17 +3004,17 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1873 src/slic3r/GUI/Plater.cpp:5213
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1873 src/slic3r/GUI/Plater.cpp:4980
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1876 src/slic3r/GUI/Plater.cpp:5213
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876 src/slic3r/GUI/Plater.cpp:4980
 msgid "Revert conversion from imperial units"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1883
 #: src/slic3r/GUI/GUI_ObjectList.cpp:1891
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2582 src/libslic3r/PrintConfig.cpp:5866
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2594 src/libslic3r/PrintConfig.cpp:5758
 msgid "Merge"
 msgstr ""
 
@@ -3070,119 +3037,120 @@ msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2093
 msgid "Error!"
-msgstr ""
+msgstr "שגיאה!"
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2168
 msgid "Add Generic Subobject"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectList.cpp:2332
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2433
+msgid "Last instance of an object cannot be deleted."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2344
 msgid "Delete Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2354
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2366
 msgid "Delete All Instances from Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2370
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2382
 msgid "Delete Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2402
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2414
 msgid "From Object List You can't delete the last solid part from object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2406
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2418
 msgid "Delete Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2421
-msgid "Last instance of an object cannot be deleted."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2425
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2437
 msgid "Delete Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2449 src/slic3r/GUI/Plater.cpp:2893
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2461 src/slic3r/GUI/Plater.cpp:2848
 msgid ""
 "The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2453
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2465
 msgid "Split to Parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2589
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2601
 msgid "Merged"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2673
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2685
 msgid "Merge all parts to the one single object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2705
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2717
 msgid "Add Layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2859
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
 msgid "Group manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2883
 msgid "Object manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2884
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2896
 msgid "Object Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2888
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2900
 msgid "Part Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2893
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2905
 msgid "Layer range Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2911
 msgid "Part manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2905
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2917
 msgid "Instance manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2912
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
 msgid "Height ranges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2912
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
 msgid "Settings for height range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3096
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
 msgid "Delete Selected Item"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3284
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3246
 msgid "Delete Selected"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3360
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3388
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3408
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3322
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3350
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3370
 msgid "Add Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3454
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3416
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "The next layer range is too thin to be split to two\n"
 "without violating the minimum layer height."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3458
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3420
 msgid ""
 "Cannot insert a new layer range between the current and the next layer "
 "range.\n"
@@ -3190,122 +3158,122 @@ msgid ""
 "is thinner than the minimum layer height allowed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3463
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3425
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "Current layer range overlaps with the next layer range."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3522
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3484
 msgid "Edit Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3817
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3779
 msgid "Selection-Remove from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3825
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3787
 msgid "Selection-Add from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3960
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3905
 msgid "Object or Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3961
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4094
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3906
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
 msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3961
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3906
 msgid "Layer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3963
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3908
 msgid "Unsupported selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3964
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3909
 #, possible-c-format
 msgid "You started your selection with %s Item."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3965
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3910
 #, possible-c-format
 msgid "In this mode you can select only other %s Items%s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3968
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3913
 msgid "of a current Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3973
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4048 src/slic3r/GUI/Plater.cpp:143
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3918
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3993 src/slic3r/GUI/Plater.cpp:143
 msgid "Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4089
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4034
 msgid "You can't change a type of the last solid part of the object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4094
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
 msgid "Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4094
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
 msgid "Support Enforcer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4094
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
 msgid "Support Blocker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4096
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
 msgid "Select type of part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4101
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4046
 msgid "Change Part Type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4346
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
 msgid "Enter new name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4346
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
 msgid "Renaming"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4362
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4489
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4307
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4434
 #: src/slic3r/GUI/SavePresetDialog.cpp:101
 #: src/slic3r/GUI/SavePresetDialog.cpp:109
 msgid "The supplied name is not valid;"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4363
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4490
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4308
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4435
 #: src/slic3r/GUI/SavePresetDialog.cpp:102
 msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4538
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4483
 msgid "Select extruder number:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4539
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
 msgid "This extruder will be set for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4564
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4509
 msgid "Change Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4661 src/slic3r/GUI/Selection.cpp:1512
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
 msgid "Set Printable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4661 src/slic3r/GUI/Selection.cpp:1512
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
 msgid "Set Unprintable"
 msgstr ""
 
@@ -3323,7 +3291,7 @@ msgstr ""
 msgid "Select coordinate space, in which the transformation will be performed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:671
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:659
 msgid "Object name"
 msgstr ""
 
@@ -3431,218 +3399,218 @@ msgstr ""
 msgid "Change Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:234
+#: src/slic3r/GUI/GUI_Preview.cpp:248
 msgid "View"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:236
+#: src/slic3r/GUI/GUI_Preview.cpp:250
 msgid "Feature"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1026
+#: src/slic3r/GUI/GUI_Preview.cpp:251 src/libslic3r/PrintConfig.cpp:1014
 msgid "Height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/PrintConfig.cpp:1640
-#: src/libslic3r/PrintConfig.cpp:4007
+#: src/slic3r/GUI/GUI_Preview.cpp:252 src/libslic3r/PrintConfig.cpp:1628
+#: src/libslic3r/PrintConfig.cpp:3900
 msgid "Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:3130
+#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/PrintConfig.cpp:3026
 msgid "Speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:240 src/slic3r/GUI/PresetHints.cpp:41
+#: src/slic3r/GUI/GUI_Preview.cpp:254 src/slic3r/GUI/PresetHints.cpp:40
 msgid "Fan"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:240
+#: src/slic3r/GUI/GUI_Preview.cpp:254
 msgid "Fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:241
+#: src/slic3r/GUI/GUI_Preview.cpp:255
 msgid "time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:241
+#: src/slic3r/GUI/GUI_Preview.cpp:255
 msgid "Layer time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:242
+#: src/slic3r/GUI/GUI_Preview.cpp:256
 msgid "Log time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:242
+#: src/slic3r/GUI/GUI_Preview.cpp:256
 msgid "Layer time (log)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:243
+#: src/slic3r/GUI/GUI_Preview.cpp:257
 msgid "Chrono"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:244
+#: src/slic3r/GUI/GUI_Preview.cpp:258
 msgid "Vol. flow"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:244
+#: src/slic3r/GUI/GUI_Preview.cpp:258
 msgid "Volumetric flow rate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:247 src/slic3r/GUI/Plater.cpp:1164
-#: src/slic3r/GUI/Plater.cpp:1168 src/slic3r/GUI/Plater.cpp:1183
-#: src/slic3r/GUI/Plater.cpp:1188 src/libslic3r/PrintConfig.cpp:82
-#: src/libslic3r/PrintConfig.cpp:1155
+#: src/slic3r/GUI/GUI_Preview.cpp:261 src/slic3r/GUI/Plater.cpp:1157
+#: src/slic3r/GUI/Plater.cpp:1161 src/slic3r/GUI/Plater.cpp:1176
+#: src/slic3r/GUI/Plater.cpp:1181 src/libslic3r/PrintConfig.cpp:82
+#: src/libslic3r/PrintConfig.cpp:1143
 msgid "Color"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:251
+#: src/slic3r/GUI/GUI_Preview.cpp:265
 msgid "Show"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:253 src/slic3r/GUI/GUI_Preview.cpp:274
+#: src/slic3r/GUI/GUI_Preview.cpp:267 src/slic3r/GUI/GUI_Preview.cpp:288
 msgid "Feature types"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:257 src/libslic3r/ExtrusionEntity.cpp:271
+#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/ExtrusionEntity.cpp:271
 #: src/libslic3r/ExtrusionEntity.cpp:298
 msgid "Perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:258 src/libslic3r/ExtrusionEntity.cpp:272
+#: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/ExtrusionEntity.cpp:272
 #: src/libslic3r/ExtrusionEntity.cpp:300
 msgid "External perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:259 src/libslic3r/ExtrusionEntity.cpp:273
+#: src/slic3r/GUI/GUI_Preview.cpp:273 src/libslic3r/ExtrusionEntity.cpp:273
 #: src/libslic3r/ExtrusionEntity.cpp:302
 msgid "Overhang perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:260 src/libslic3r/ExtrusionEntity.cpp:274
+#: src/slic3r/GUI/GUI_Preview.cpp:274 src/libslic3r/ExtrusionEntity.cpp:274
 #: src/libslic3r/ExtrusionEntity.cpp:304
 msgid "Internal infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:261 src/libslic3r/ExtrusionEntity.cpp:275
-#: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3253
+#: src/slic3r/GUI/GUI_Preview.cpp:275 src/libslic3r/ExtrusionEntity.cpp:275
+#: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3149
 msgid "Solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:262 src/libslic3r/ExtrusionEntity.cpp:276
-#: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3805
+#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:276
+#: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3698
 msgid "Top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:263 src/libslic3r/ExtrusionEntity.cpp:278
+#: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/ExtrusionEntity.cpp:278
 #: src/libslic3r/ExtrusionEntity.cpp:312
 msgid "Bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:264 src/libslic3r/ExtrusionEntity.cpp:279
+#: src/slic3r/GUI/GUI_Preview.cpp:278 src/libslic3r/ExtrusionEntity.cpp:279
 #: src/libslic3r/ExtrusionEntity.cpp:314
 msgid "Internal bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:265 src/libslic3r/ExtrusionEntity.cpp:280
+#: src/slic3r/GUI/GUI_Preview.cpp:279 src/libslic3r/ExtrusionEntity.cpp:280
 #: src/libslic3r/ExtrusionEntity.cpp:316
 msgid "Thin wall"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:266 src/libslic3r/ExtrusionEntity.cpp:281
-#: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1801
+#: src/slic3r/GUI/GUI_Preview.cpp:280 src/libslic3r/ExtrusionEntity.cpp:281
+#: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1778
 msgid "Gap fill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:267 src/libslic3r/ExtrusionEntity.cpp:282
-#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:3091
+#: src/slic3r/GUI/GUI_Preview.cpp:281 src/libslic3r/ExtrusionEntity.cpp:282
+#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:2987
 msgid "Skirt"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:268 src/libslic3r/ExtrusionEntity.cpp:283
-#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3524
+#: src/slic3r/GUI/GUI_Preview.cpp:282 src/libslic3r/ExtrusionEntity.cpp:283
+#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3417
 msgid "Support material"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/ExtrusionEntity.cpp:284
+#: src/slic3r/GUI/GUI_Preview.cpp:283 src/libslic3r/ExtrusionEntity.cpp:284
 #: src/libslic3r/ExtrusionEntity.cpp:324
 msgid "Support material interface"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:269
+#: src/slic3r/GUI/GUI_Preview.cpp:283
 msgid "Sup. mat. interface"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:285
+#: src/slic3r/GUI/GUI_Preview.cpp:284 src/libslic3r/ExtrusionEntity.cpp:285
 #: src/libslic3r/ExtrusionEntity.cpp:326
 msgid "Wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/ExtrusionEntity.cpp:286
+#: src/slic3r/GUI/GUI_Preview.cpp:285 src/libslic3r/ExtrusionEntity.cpp:286
 #: src/libslic3r/ExtrusionEntity.cpp:328
 msgid "Mill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1075
+#: src/slic3r/GUI/GUI_Preview.cpp:1027
 msgid "Retr."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1076
+#: src/slic3r/GUI/GUI_Preview.cpp:1028
 msgid "Dere."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1077
+#: src/slic3r/GUI/GUI_Preview.cpp:1029
 msgid "Tool/C"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1078
+#: src/slic3r/GUI/GUI_Preview.cpp:1030
 msgid "Col/C"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1081
+#: src/slic3r/GUI/GUI_Preview.cpp:1033
 msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1082
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
 msgid "Marker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1082
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
 msgid "Tool marker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1083
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
 msgid "Legend"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:1083
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:806 src/slic3r/GUI/Search.cpp:389
+#: src/slic3r/GUI/ImGuiWrapper.cpp:806 src/slic3r/GUI/Search.cpp:464
 msgid "Use for search"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:383
+#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:458
 msgid "Category"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:809 src/slic3r/GUI/Search.cpp:385
+#: src/slic3r/GUI/ImGuiWrapper.cpp:809 src/slic3r/GUI/Search.cpp:460
 msgid "Search in English"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:147
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:145
 msgid "Arranging"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:178
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:175
 msgid "Could not arrange model objects! Some geometries may be invalid."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:184
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:181
 msgid "Arranging canceled."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:185
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
 msgid "Arranging done."
 msgstr ""
 
@@ -3706,16 +3674,16 @@ msgstr ""
 msgid "Importing done."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2385
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2341
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2386
-#: src/slic3r/GUI/Tab.cpp:3311
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2342
+#: src/slic3r/GUI/Tab.cpp:3288
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:34 src/slic3r/GUI/MainFrame.cpp:907
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:34 src/slic3r/GUI/MainFrame.cpp:908
 msgid "Keyboard Shortcuts"
 msgstr ""
 
@@ -3751,12 +3719,12 @@ msgstr ""
 msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/Plater.cpp:771
-#: src/slic3r/GUI/Plater.cpp:6056 src/libslic3r/PrintConfig.cpp:5768
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/Plater.cpp:764
+#: src/slic3r/GUI/Plater.cpp:5811 src/libslic3r/PrintConfig.cpp:5660
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:6057
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:5812
 msgid "Send G-code"
 msgstr ""
 
@@ -3764,7 +3732,7 @@ msgstr ""
 msgid "Export config"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:759
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:752
 msgid "Export to SD card / Flash drive"
 msgstr ""
 
@@ -3792,1202 +3760,1117 @@ msgstr ""
 msgid "Paste from clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
 msgid "Reload plater from disk"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
 msgid "Select Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
 msgid "Select Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
 msgid "Select Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
 msgid "Select Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
 msgid "Switch to 3D"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
 msgid "Switch to Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
-#: src/slic3r/GUI/PrintHostDialogs.cpp:167
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/PrintHostDialogs.cpp:165
 msgid "Print host upload queue"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:135 src/slic3r/GUI/MainFrame.cpp:66
-#: src/slic3r/GUI/MainFrame.cpp:1204
-msgid "Open new instance"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
 msgid "Camera view"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
 msgid "Show/Hide object/instance labels"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:140 src/slic3r/GUI/Preferences.cpp:12
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135 src/slic3r/GUI/Preferences.cpp:12
 msgid "Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
 msgid "Show keyboard shortcuts list"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
 msgid "Commands"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
 msgid "Add Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
 msgid "Remove Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
 msgid ""
 "Press to select multiple objects\n"
 "or move multiple objects with mouse"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
 msgid "Press to activate selection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
 msgid "Press to activate deselection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:258
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
 msgid "Arrow Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
 msgid "Move selection 10 mm in positive Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:259
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
 msgid "Arrow Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
 msgid "Move selection 10 mm in negative Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:272
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
 msgid "Arrow Left"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
 msgid "Move selection 10 mm in negative X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:261
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:273
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
 msgid "Arrow Right"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
 msgid "Move selection 10 mm in positive X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
 msgid "Any arrow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
 msgid "Movement step set to 1 mm"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
 msgid "Movement in camera space"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
 msgid "Page Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
 msgid "Rotate selection 45 degrees CCW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
 msgid "Page Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
 msgid "Rotate selection 45 degrees CW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
 msgid "Gizmo move"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
 msgid "Gizmo scale"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
 msgid "Gizmo rotate"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
 msgid "Gizmo cut"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
 msgid "Gizmo Place face on bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
 msgid "Gizmo SLA hollow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
 msgid "Gizmo SLA support points"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
 msgid "Unselect gizmo or clear selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
 msgid "Change camera type (perspective, orthographic)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
 msgid "Zoom to Bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
 msgid ""
 "Zoom to selected object\n"
 "or all objects in scene, if none selected"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
 msgid "Zoom in"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
 msgid "Zoom out"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
 msgid "Switch between Editor/Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
 msgid "Collapse/Expand the sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
-msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
 msgid "Show/Hide 3Dconnexion devices settings dialog"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:195 src/slic3r/GUI/MainFrame.cpp:327
-#: src/slic3r/GUI/MainFrame.cpp:339
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:186 src/slic3r/GUI/MainFrame.cpp:328
+#: src/slic3r/GUI/MainFrame.cpp:340
 msgid "Plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
 msgid "Gizmo move: Press to snap by 1mm"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
 msgid "Gizmo scale: Press to snap by 5%"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
 msgid "Gizmo scale: Scale selection to fit print volume"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
 msgid "Gizmo scale: Press to activate one direction scaling"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
 msgid "Gizmo scale: Press to scale selected objects around their own center"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
 msgid "Gizmo rotate: Press to rotate selected objects around their own center"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
 msgid "Gizmos"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1298
-msgid "Open a G-code file"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1155
-#: src/slic3r/GUI/MainFrame.cpp:1159 src/slic3r/GUI/MainFrame.cpp:1303
-#: src/slic3r/GUI/MainFrame.cpp:1307
-msgid "Reload the plater from disk"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
-msgid "Vertical slider - Move active thumb Up"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
-msgid "Vertical slider - Move active thumb Down"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
-msgid "Horizontal slider - Move active thumb Left"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
-msgid "Horizontal slider - Move active thumb Right"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
-msgid "On/Off one layer mode of the vertical slider"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
-msgid "Show/Hide Legend and Estimated printing time"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
-msgid "Upper layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
-msgid "Lower layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
 msgid "Upper Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
 msgid "Lower Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
 msgid "Show/Hide Legend & Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:243 src/slic3r/GUI/Plater.cpp:4184
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:209 src/slic3r/GUI/Plater.cpp:4136
 msgid "Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
-msgid "Vertical slider - Set upper thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
-msgid "Vertical slider - Set lower thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:251
-msgid "Vertical slider - Add color change marker for current layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
-msgid "Vertical slider - Delete color change marker for current layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-msgid "Horizontal slider - Set left thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
-msgid "Horizontal slider - Set right thumb as active"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:258
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
 msgid "Move current slider thumb Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:259
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
 msgid "Move current slider thumb Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
 msgid "Set upper thumb to current slider thumb"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:261
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
 msgid "Set lower thumb to current slider thumb"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:262
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
 msgid "Add color change marker for current layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:263
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
 msgid "Delete color change marker for current layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:265
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:266
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:274
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:275
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
 msgid ""
 "Press to speed up 5 times while moving thumb\n"
 "with arrow keys or mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:269
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
 msgid "Layers Slider"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:272
-msgid "Move active slider thumb Left"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgid "Move current slider thumb Left"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:273
-msgid "Move active slider thumb Right"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+msgid "Move current slider thumb Right"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:278
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
 msgid "Sequential Slider"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:301
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
 msgid "Keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:80
-#: src/slic3r/GUI/MainFrame.cpp:1204
+#: src/slic3r/GUI/MainFrame.cpp:64 src/slic3r/GUI/MainFrame.cpp:1199
+msgid "Open new instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:64 src/slic3r/GUI/MainFrame.cpp:78
+#: src/slic3r/GUI/MainFrame.cpp:1199
 msgid "Open a new PrusaSlicer instance"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:69 src/slic3r/GUI/MainFrame.cpp:82
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:80
 msgid "G-code preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:69 src/slic3r/GUI/MainFrame.cpp:1104
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:1105
 msgid "Open G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:80
+#: src/slic3r/GUI/MainFrame.cpp:78
 msgid "Open PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:82
+#: src/slic3r/GUI/MainFrame.cpp:80
 msgid "Open new G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:154
+#: src/slic3r/GUI/MainFrame.cpp:155
 msgid ""
 "Remember to check for updates at https://github.com/supermerill/SuperSlicer/"
 "releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:511
+#: src/slic3r/GUI/MainFrame.cpp:512
 msgid "based on PrusaSlicer & Slic3r"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:874
+#: src/slic3r/GUI/MainFrame.cpp:875
 msgid "SuperSlicer Releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:874
+#: src/slic3r/GUI/MainFrame.cpp:875
 msgid "Open the SuperSlicer releases page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:876
+#: src/slic3r/GUI/MainFrame.cpp:877
 msgid "SuperSlicer wiki"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:876
+#: src/slic3r/GUI/MainFrame.cpp:877
 msgid "Open the SuperSlicer wiki in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:878
+#: src/slic3r/GUI/MainFrame.cpp:879
 msgid "SuperSlicer website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:878
+#: src/slic3r/GUI/MainFrame.cpp:879
 msgid "Open the SuperSlicer website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:880
+#: src/slic3r/GUI/MainFrame.cpp:881
 msgid "Prusa Edition website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:880
+#: src/slic3r/GUI/MainFrame.cpp:881
 msgid "Open the Prusa Edition website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:886
+#: src/slic3r/GUI/MainFrame.cpp:887
 msgid "Slic3r Website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:887
+#: src/slic3r/GUI/MainFrame.cpp:888
 msgid "Open the Slic3r website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:893
+#: src/slic3r/GUI/MainFrame.cpp:894
 msgid "System &Info"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:893
+#: src/slic3r/GUI/MainFrame.cpp:894
 msgid "Show system information"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:895
+#: src/slic3r/GUI/MainFrame.cpp:896
 msgid "Show &Configuration Folder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:895
+#: src/slic3r/GUI/MainFrame.cpp:896
 msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:897
+#: src/slic3r/GUI/MainFrame.cpp:898
 msgid "Report an I&ssue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:897
+#: src/slic3r/GUI/MainFrame.cpp:898
 #, possible-c-format
 msgid "Report an issue on %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:901 src/slic3r/GUI/MainFrame.cpp:904
+#: src/slic3r/GUI/MainFrame.cpp:902 src/slic3r/GUI/MainFrame.cpp:905
 #, possible-c-format
 msgid "&About %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:901 src/slic3r/GUI/MainFrame.cpp:904
+#: src/slic3r/GUI/MainFrame.cpp:902 src/slic3r/GUI/MainFrame.cpp:905
 msgid "Show about dialog"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:907
+#: src/slic3r/GUI/MainFrame.cpp:908
 msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:921
+#: src/slic3r/GUI/MainFrame.cpp:922
 msgid "Iso"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:921
+#: src/slic3r/GUI/MainFrame.cpp:922
 msgid "Iso View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Top
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:925 src/libslic3r/PrintConfig.cpp:695
-#: src/libslic3r/PrintConfig.cpp:3475 src/libslic3r/PrintConfig.cpp:3834
-#: src/libslic3r/PrintConfig.cpp:3844
+#: src/slic3r/GUI/MainFrame.cpp:926 src/libslic3r/PrintConfig.cpp:680
+#: src/libslic3r/PrintConfig.cpp:3368 src/libslic3r/PrintConfig.cpp:3727
+#: src/libslic3r/PrintConfig.cpp:3737
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:925
+#: src/slic3r/GUI/MainFrame.cpp:926
 msgid "Top View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Bottom
 #. TRN To be shown in Print Settings "Bottom solid layers"
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:928 src/libslic3r/PrintConfig.cpp:273
-#: src/libslic3r/PrintConfig.cpp:281 src/libslic3r/PrintConfig.cpp:726
-#: src/libslic3r/PrintConfig.cpp:3490
+#: src/slic3r/GUI/MainFrame.cpp:929 src/libslic3r/PrintConfig.cpp:271
+#: src/libslic3r/PrintConfig.cpp:279 src/libslic3r/PrintConfig.cpp:713
+#: src/libslic3r/PrintConfig.cpp:3383
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:928
+#: src/slic3r/GUI/MainFrame.cpp:929
 msgid "Bottom View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:930
+#: src/slic3r/GUI/MainFrame.cpp:931
 msgid "Front"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:930
+#: src/slic3r/GUI/MainFrame.cpp:931
 msgid "Front View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:932 src/libslic3r/PrintConfig.cpp:964
-#: src/libslic3r/PrintConfig.cpp:3023
+#: src/slic3r/GUI/MainFrame.cpp:933 src/libslic3r/PrintConfig.cpp:952
+#: src/libslic3r/PrintConfig.cpp:2919
 msgid "Rear"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:932
+#: src/slic3r/GUI/MainFrame.cpp:933
 msgid "Rear View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:934
+#: src/slic3r/GUI/MainFrame.cpp:935
 msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:934
+#: src/slic3r/GUI/MainFrame.cpp:935
 msgid "Left View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:936
+#: src/slic3r/GUI/MainFrame.cpp:937
 msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:936
+#: src/slic3r/GUI/MainFrame.cpp:937
 msgid "Right View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:949
+#: src/slic3r/GUI/MainFrame.cpp:950
 msgid "&New Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:949
+#: src/slic3r/GUI/MainFrame.cpp:950
 msgid "Start a new project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:952
+#: src/slic3r/GUI/MainFrame.cpp:953
 msgid "&Open Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:952
+#: src/slic3r/GUI/MainFrame.cpp:953
 msgid "Open a project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:957
+#: src/slic3r/GUI/MainFrame.cpp:958
 msgid "Recent projects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:966
+#: src/slic3r/GUI/MainFrame.cpp:967
 msgid ""
 "The selected project is no longer available.\n"
 "Do you want to remove it from the recent projects list?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:966 src/slic3r/GUI/MainFrame.cpp:1397
-#: src/slic3r/GUI/PrintHostDialogs.cpp:263
+#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1384
+#: src/slic3r/GUI/PrintHostDialogs.cpp:261
 msgid "Error"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:991
+#: src/slic3r/GUI/MainFrame.cpp:992
 msgid "&Save Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:991
+#: src/slic3r/GUI/MainFrame.cpp:992
 msgid "Save current project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:995 src/slic3r/GUI/MainFrame.cpp:997
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
 msgid "Save Project &as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:995 src/slic3r/GUI/MainFrame.cpp:997
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
 msgid "Save current project file as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1005
+#: src/slic3r/GUI/MainFrame.cpp:1006
 msgid "Import STL/OBJ/AM&F/3MF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1005
+#: src/slic3r/GUI/MainFrame.cpp:1006
 msgid "Load a model"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1009
+#: src/slic3r/GUI/MainFrame.cpp:1010
 msgid "Import STL (imperial units)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1009
+#: src/slic3r/GUI/MainFrame.cpp:1010
 msgid "Load an model saved with imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1013
+#: src/slic3r/GUI/MainFrame.cpp:1014
 msgid "Import SL1 archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1013
+#: src/slic3r/GUI/MainFrame.cpp:1014
 msgid "Load an SL1 archive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1018
+#: src/slic3r/GUI/MainFrame.cpp:1019
 msgid "Import &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1018
+#: src/slic3r/GUI/MainFrame.cpp:1019
 msgid "Load exported configuration file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1021
+#: src/slic3r/GUI/MainFrame.cpp:1022
 msgid "Import Config from &project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1021
+#: src/slic3r/GUI/MainFrame.cpp:1022
 msgid "Load configuration from project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1025
+#: src/slic3r/GUI/MainFrame.cpp:1026
 msgid "Import Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1025
+#: src/slic3r/GUI/MainFrame.cpp:1026
 msgid "Load presets from a bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1028
+#: src/slic3r/GUI/MainFrame.cpp:1029
 msgid "&Import"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1031 src/slic3r/GUI/MainFrame.cpp:1359
+#: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1346
 msgid "Export &G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1031
+#: src/slic3r/GUI/MainFrame.cpp:1032
 msgid "Export current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1035 src/slic3r/GUI/MainFrame.cpp:1360
+#: src/slic3r/GUI/MainFrame.cpp:1036 src/slic3r/GUI/MainFrame.cpp:1347
 msgid "S&end G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1035
+#: src/slic3r/GUI/MainFrame.cpp:1036
 msgid "Send to print current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1039
+#: src/slic3r/GUI/MainFrame.cpp:1040
 msgid "Export G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1039
+#: src/slic3r/GUI/MainFrame.cpp:1040
 msgid "Export current plate as G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1043
+#: src/slic3r/GUI/MainFrame.cpp:1044
 msgid "Export plate as &STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1043
+#: src/slic3r/GUI/MainFrame.cpp:1044
 msgid "Export current plate as STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1046
+#: src/slic3r/GUI/MainFrame.cpp:1047
 msgid "Export plate as STL &including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1046
+#: src/slic3r/GUI/MainFrame.cpp:1047
 msgid "Export current plate as STL including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1049
+#: src/slic3r/GUI/MainFrame.cpp:1050
 msgid "Export plate as &AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1049
+#: src/slic3r/GUI/MainFrame.cpp:1050
 msgid "Export current plate as AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1053 src/slic3r/GUI/MainFrame.cpp:1311
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
 msgid "Export &toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1053 src/slic3r/GUI/MainFrame.cpp:1311
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
 msgid "Export toolpaths as OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1057
+#: src/slic3r/GUI/MainFrame.cpp:1058
 msgid "Export &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1057
+#: src/slic3r/GUI/MainFrame.cpp:1058
 msgid "Export current configuration to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1060
+#: src/slic3r/GUI/MainFrame.cpp:1061
 msgid "Export Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1060
+#: src/slic3r/GUI/MainFrame.cpp:1061
 msgid "Export all presets to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1063
+#: src/slic3r/GUI/MainFrame.cpp:1064
 msgid "Export Config Bundle With Physical Printers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1063
+#: src/slic3r/GUI/MainFrame.cpp:1064
 msgid "Export all presets including physical printers to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1066
+#: src/slic3r/GUI/MainFrame.cpp:1067
 msgid "&Export"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1068
+#: src/slic3r/GUI/MainFrame.cpp:1069
 msgid "Ejec&t SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1068
+#: src/slic3r/GUI/MainFrame.cpp:1069
 msgid "Eject SD card / Flash drive after the G-code was exported to it."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1076
+#: src/slic3r/GUI/MainFrame.cpp:1077
 msgid "Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1076
+#: src/slic3r/GUI/MainFrame.cpp:1077
 msgid "Slice a file into a G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1082
+#: src/slic3r/GUI/MainFrame.cpp:1083
 msgid "Quick Slice and Save As"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1082
+#: src/slic3r/GUI/MainFrame.cpp:1083
 msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1088
+#: src/slic3r/GUI/MainFrame.cpp:1089
 msgid "Repeat Last Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1088
+#: src/slic3r/GUI/MainFrame.cpp:1089
 msgid "Repeat last quick slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1096
+#: src/slic3r/GUI/MainFrame.cpp:1097
 msgid "(Re)Slice No&w"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1096
+#: src/slic3r/GUI/MainFrame.cpp:1097
 msgid "Start new slicing process"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1100
+#: src/slic3r/GUI/MainFrame.cpp:1101
 msgid "&Repair STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1100
+#: src/slic3r/GUI/MainFrame.cpp:1101
 msgid "Automatically repair an STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1104
+#: src/slic3r/GUI/MainFrame.cpp:1105
 msgid "&G-code preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1107 src/slic3r/GUI/MainFrame.cpp:1318
+#: src/slic3r/GUI/MainFrame.cpp:1108 src/slic3r/GUI/MainFrame.cpp:1305
 msgid "&Quit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1107 src/slic3r/GUI/MainFrame.cpp:1318
+#: src/slic3r/GUI/MainFrame.cpp:1108 src/slic3r/GUI/MainFrame.cpp:1305
 #, possible-c-format
 msgid "Quit %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1122
+#: src/slic3r/GUI/MainFrame.cpp:1123
 msgid "&Select all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1123
+#: src/slic3r/GUI/MainFrame.cpp:1124
 msgid "Selects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1125
+#: src/slic3r/GUI/MainFrame.cpp:1126
 msgid "D&eselect all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1126
+#: src/slic3r/GUI/MainFrame.cpp:1127
 msgid "Deselects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1129
+#: src/slic3r/GUI/MainFrame.cpp:1130
 msgid "&Delete selected"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1130
+#: src/slic3r/GUI/MainFrame.cpp:1131
 msgid "Deletes the current selection"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1132
+#: src/slic3r/GUI/MainFrame.cpp:1133
 msgid "Delete &all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1133
+#: src/slic3r/GUI/MainFrame.cpp:1134
 msgid "Deletes all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1137
+#: src/slic3r/GUI/MainFrame.cpp:1138
 msgid "&Undo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1140
+#: src/slic3r/GUI/MainFrame.cpp:1141
 msgid "&Redo"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1145
+#: src/slic3r/GUI/MainFrame.cpp:1146
 msgid "&Copy"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1146
+#: src/slic3r/GUI/MainFrame.cpp:1147
 msgid "Copy selection to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1148
+#: src/slic3r/GUI/MainFrame.cpp:1149
 msgid "&Paste"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1149
+#: src/slic3r/GUI/MainFrame.cpp:1150
 msgid "Paste clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1154 src/slic3r/GUI/MainFrame.cpp:1158
-#: src/slic3r/GUI/MainFrame.cpp:1302 src/slic3r/GUI/MainFrame.cpp:1306
+#: src/slic3r/GUI/MainFrame.cpp:1154
 msgid "Re&load from disk"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1164
+#: src/slic3r/GUI/MainFrame.cpp:1155
+msgid "Reload the plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1159
 msgid "Searc&h"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1165
+#: src/slic3r/GUI/MainFrame.cpp:1160
 msgid "Search in settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1173
+#: src/slic3r/GUI/MainFrame.cpp:1168
 msgid "&Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1173
+#: src/slic3r/GUI/MainFrame.cpp:1168
 msgid "Show the plater"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1178
+#: src/slic3r/GUI/MainFrame.cpp:1173
 msgid "P&rint Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1178
+#: src/slic3r/GUI/MainFrame.cpp:1173
 msgid "Show the print settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1181 src/slic3r/GUI/MainFrame.cpp:1362
+#: src/slic3r/GUI/MainFrame.cpp:1176 src/slic3r/GUI/MainFrame.cpp:1349
 msgid "&Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1181
+#: src/slic3r/GUI/MainFrame.cpp:1176
 msgid "Show the filament settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1185
+#: src/slic3r/GUI/MainFrame.cpp:1180
 msgid "Print&er Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1185
+#: src/slic3r/GUI/MainFrame.cpp:1180
 msgid "Show the printer settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1191
+#: src/slic3r/GUI/MainFrame.cpp:1186
 msgid "3&D"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1191
+#: src/slic3r/GUI/MainFrame.cpp:1186
 msgid "Show the 3D editing view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1194
+#: src/slic3r/GUI/MainFrame.cpp:1189
 msgid "Pre&view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1194
+#: src/slic3r/GUI/MainFrame.cpp:1189
 msgid "Show the 3D slices preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1200
+#: src/slic3r/GUI/MainFrame.cpp:1195
 msgid "Print &Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1200
+#: src/slic3r/GUI/MainFrame.cpp:1195
 msgid "Display the Print Host Upload Queue window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1214
+#: src/slic3r/GUI/MainFrame.cpp:1210
 msgid "Show &labels"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1214
+#: src/slic3r/GUI/MainFrame.cpp:1210
 msgid "Show object/instance labels in 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1217
+#: src/slic3r/GUI/MainFrame.cpp:1213
 msgid "&Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1217 src/slic3r/GUI/Plater.cpp:2275
+#: src/slic3r/GUI/MainFrame.cpp:1213 src/slic3r/GUI/Plater.cpp:2231
 msgid "Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1227
+#: src/slic3r/GUI/MainFrame.cpp:1223
 msgid "Introduction"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1227
+#: src/slic3r/GUI/MainFrame.cpp:1223
 msgid "How to use this menu and calibrations."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1230
+#: src/slic3r/GUI/MainFrame.cpp:1226
 msgid "Bed/Extruder levelling"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1230
+#: src/slic3r/GUI/MainFrame.cpp:1226
 msgid "Create a test print to help you to level your printer bed."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1233
+#: src/slic3r/GUI/MainFrame.cpp:1229
 msgid "Filament Flow calibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1233
+#: src/slic3r/GUI/MainFrame.cpp:1229
 msgid ""
 "Create a test print to help you to set your filament extrusion multiplier."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1235
+#: src/slic3r/GUI/MainFrame.cpp:1231
 msgid "Filament temperature calibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1235
+#: src/slic3r/GUI/MainFrame.cpp:1231
 msgid "Create a test print to help you to set your filament temperature."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1237
+#: src/slic3r/GUI/MainFrame.cpp:1233
 msgid "Extruder retraction calibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1237
+#: src/slic3r/GUI/MainFrame.cpp:1233
 msgid "Create a test print to help you to set your retraction length."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1240
+#: src/slic3r/GUI/MainFrame.cpp:1236
 msgid "Bridge flow calibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1240
+#: src/slic3r/GUI/MainFrame.cpp:1236
 msgid "Create a test print to help you to set your bridge flow ratio."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1242
+#: src/slic3r/GUI/MainFrame.cpp:1238
 msgid "Ironing pattern calibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1242
+#: src/slic3r/GUI/MainFrame.cpp:1238
 msgid ""
 "Create a test print to help you to set your over-bridge flow ratio and "
 "ironing pattern."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1245
+#: src/slic3r/GUI/MainFrame.cpp:1241
 msgid "Calibration cube"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1245
+#: src/slic3r/GUI/MainFrame.cpp:1241
 msgid "Print a calibration cube, for various calibration goals."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1254
+#: src/slic3r/GUI/MainFrame.cpp:1250
 msgid "FreeCad python script"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1254
+#: src/slic3r/GUI/MainFrame.cpp:1250
 msgid "Create an object by writing little easy script."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1256
+#: src/slic3r/GUI/MainFrame.cpp:1252
 msgid "Script help page"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1256
+#: src/slic3r/GUI/MainFrame.cpp:1252
 msgid "How to use the FreeCad python script window."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1268 src/slic3r/GUI/MainFrame.cpp:1333
+#: src/slic3r/GUI/MainFrame.cpp:1264 src/slic3r/GUI/MainFrame.cpp:1320
 msgid "&File"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1269
+#: src/slic3r/GUI/MainFrame.cpp:1265
 msgid "&Edit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1270
+#: src/slic3r/GUI/MainFrame.cpp:1266
 msgid "&Window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1271 src/slic3r/GUI/MainFrame.cpp:1334
+#: src/slic3r/GUI/MainFrame.cpp:1267 src/slic3r/GUI/MainFrame.cpp:1321
 msgid "&View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1272
+#: src/slic3r/GUI/MainFrame.cpp:1268
 msgid "C&alibration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1273
+#: src/slic3r/GUI/MainFrame.cpp:1269
 msgid "&Generate"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1276 src/slic3r/GUI/MainFrame.cpp:1337
+#: src/slic3r/GUI/MainFrame.cpp:1272 src/slic3r/GUI/MainFrame.cpp:1324
 msgid "&Help"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1298
+#: src/slic3r/GUI/MainFrame.cpp:1294
 msgid "&Open G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1314
+#: src/slic3r/GUI/MainFrame.cpp:1294
+msgid "Open a G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1301
 msgid "Open &SuperSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1314
+#: src/slic3r/GUI/MainFrame.cpp:1301
 msgid "Open SuperSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1359
+#: src/slic3r/GUI/MainFrame.cpp:1346
 msgid "E&xport"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1360
+#: src/slic3r/GUI/MainFrame.cpp:1347
 msgid "S&end to print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1362
+#: src/slic3r/GUI/MainFrame.cpp:1349
 msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1385
+#: src/slic3r/GUI/MainFrame.cpp:1372
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1396
+#: src/slic3r/GUI/MainFrame.cpp:1383
 msgid "No previously sliced file."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1402
+#: src/slic3r/GUI/MainFrame.cpp:1389
 msgid "Previously sliced file ("
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1402
+#: src/slic3r/GUI/MainFrame.cpp:1389
 msgid ") not found."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1403
+#: src/slic3r/GUI/MainFrame.cpp:1390
 msgid "File Not Found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1438
+#: src/slic3r/GUI/MainFrame.cpp:1425
 #, possible-c-format
 msgid "Save %s file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1438
+#: src/slic3r/GUI/MainFrame.cpp:1425
 msgid "SVG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1438
+#: src/slic3r/GUI/MainFrame.cpp:1425
 msgid "G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1450
+#: src/slic3r/GUI/MainFrame.cpp:1437
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1459 src/slic3r/GUI/Plater.cpp:3038
-#: src/slic3r/GUI/Plater.cpp:5582 src/slic3r/GUI/Tab.cpp:4252
+#: src/slic3r/GUI/MainFrame.cpp:1446 src/slic3r/GUI/Plater.cpp:2993
+#: src/slic3r/GUI/Plater.cpp:5346 src/slic3r/GUI/Tab.cpp:4229
 msgid "Slicing"
 msgstr ""
 
 #. TRN "Processing input_file_basename"
-#: src/slic3r/GUI/MainFrame.cpp:1461
+#: src/slic3r/GUI/MainFrame.cpp:1448
 #, possible-c-format
 msgid "Processing %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1484
+#: src/slic3r/GUI/MainFrame.cpp:1471
 #, possible-c-format
 msgid "%1% was successfully sliced."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1486
+#: src/slic3r/GUI/MainFrame.cpp:1473
 msgid "Slicing Done!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1501
+#: src/slic3r/GUI/MainFrame.cpp:1488
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1511
+#: src/slic3r/GUI/MainFrame.cpp:1498
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1523
+#: src/slic3r/GUI/MainFrame.cpp:1510
 msgid "Your file was repaired."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1523 src/libslic3r/PrintConfig.cpp:5871
+#: src/slic3r/GUI/MainFrame.cpp:1510 src/libslic3r/PrintConfig.cpp:5763
 msgid "Repair"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1537
+#: src/slic3r/GUI/MainFrame.cpp:1524
 msgid "Save configuration as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1556 src/slic3r/GUI/MainFrame.cpp:1618
+#: src/slic3r/GUI/MainFrame.cpp:1543 src/slic3r/GUI/MainFrame.cpp:1605
 msgid "Select configuration to load:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1592
+#: src/slic3r/GUI/MainFrame.cpp:1579
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1639
+#: src/slic3r/GUI/MainFrame.cpp:1626
 #, possible-c-format
 msgid "%d presets successfully imported."
 msgstr ""
@@ -5026,71 +4909,71 @@ msgstr ""
 msgid "Swap Y/Z axes"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:70
+#: src/slic3r/GUI/MsgDialog.cpp:73
 #, possible-c-format
 msgid "%s error"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:71
+#: src/slic3r/GUI/MsgDialog.cpp:74
 #, possible-c-format
 msgid "%s has encountered an error"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:448
+#: src/slic3r/GUI/NotificationManager.hpp:395
 msgid "3D Mouse disconnected."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:451
+#: src/slic3r/GUI/NotificationManager.hpp:398
 msgid "Configuration update is available."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:451
+#: src/slic3r/GUI/NotificationManager.hpp:398
 msgid "See more."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:453
+#: src/slic3r/GUI/NotificationManager.hpp:400
 msgid "New version is available."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:453
+#: src/slic3r/GUI/NotificationManager.hpp:400
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:483
-#: src/slic3r/GUI/NotificationManager.cpp:493
+#: src/slic3r/GUI/NotificationManager.cpp:389
+#: src/slic3r/GUI/NotificationManager.cpp:399
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:834
-#: src/slic3r/GUI/NotificationManager.cpp:1105
+#: src/slic3r/GUI/NotificationManager.cpp:692
+#: src/slic3r/GUI/NotificationManager.cpp:963
 msgid "Export G-Code."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:878
+#: src/slic3r/GUI/NotificationManager.cpp:736
 msgid "Open Folder."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:916
+#: src/slic3r/GUI/NotificationManager.cpp:774
 msgid "Eject drive"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1024
-#: src/slic3r/GUI/NotificationManager.cpp:1040
-#: src/slic3r/GUI/NotificationManager.cpp:1051
+#: src/slic3r/GUI/NotificationManager.cpp:882
+#: src/slic3r/GUI/NotificationManager.cpp:898
+#: src/slic3r/GUI/NotificationManager.cpp:909
 msgid "ERROR:"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1029
-#: src/slic3r/GUI/NotificationManager.cpp:1044
-#: src/slic3r/GUI/NotificationManager.cpp:1059
+#: src/slic3r/GUI/NotificationManager.cpp:887
+#: src/slic3r/GUI/NotificationManager.cpp:902
+#: src/slic3r/GUI/NotificationManager.cpp:917
 msgid "WARNING:"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1108
+#: src/slic3r/GUI/NotificationManager.cpp:966
 msgid "Slicing finished."
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1150
+#: src/slic3r/GUI/NotificationManager.cpp:1009
 msgid "Exporting finished."
 msgstr ""
 
@@ -5104,8 +4987,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:4097
-#: src/slic3r/GUI/Tab.cpp:4181
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:4074
+#: src/slic3r/GUI/Tab.cpp:4158
 msgid "Layers"
 msgstr ""
 
@@ -5204,7 +5087,7 @@ msgid "Open CA certificate file"
 msgstr ""
 
 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:430
-#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:2588
+#: src/libslic3r/PrintConfig.cpp:163 src/libslic3r/PrintConfig.cpp:2487
 msgid "HTTPS CA File"
 msgstr ""
 
@@ -5249,6 +5132,10 @@ msgstr ""
 msgid "It's not possible to delete the last related preset for the printer."
 msgstr ""
 
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
+msgid "Infornation"
+msgstr ""
+
 #: src/slic3r/GUI/Plater.cpp:163
 msgid "Volume"
 msgstr ""
@@ -5269,16 +5156,16 @@ msgstr ""
 msgid "Sliced Info"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1152
+#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1145
 msgid "Used Filament (m)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1174
+#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1167
 msgid "Used Filament (mm³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1179
-#: src/slic3r/GUI/Plater.cpp:1193
+#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1172
+#: src/slic3r/GUI/Plater.cpp:1186
 msgid "Used Filament (g)"
 msgstr ""
 
@@ -5294,8 +5181,8 @@ msgstr ""
 msgid "Number of tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4185
-#: src/slic3r/GUI/Tab.cpp:4186
+#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4162
+#: src/slic3r/GUI/Tab.cpp:4163
 msgid "Supports"
 msgstr ""
 
@@ -5303,12 +5190,12 @@ msgstr ""
 msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:3450
-#: src/libslic3r/PrintConfig.cpp:4682
+#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:3343
+#: src/libslic3r/PrintConfig.cpp:4575
 msgid "Support on build plate only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489
+#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:486
 msgid "For support enforcers only"
 msgstr ""
 
@@ -5330,538 +5217,537 @@ msgstr ""
 msgid "Purging volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4226
-#: src/slic3r/GUI/Tab.cpp:4227 src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Plater.cpp:497 src/slic3r/GUI/Tab.cpp:4203
+#: src/slic3r/GUI/Tab.cpp:4204 src/slic3r/GUI/Tab.cpp:4275
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:503
+#: src/slic3r/GUI/Plater.cpp:500
 msgid "Select what kind of pad do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:505
+#: src/slic3r/GUI/Plater.cpp:502
 msgid "Below object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:506
+#: src/slic3r/GUI/Plater.cpp:503
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:696
+#: src/slic3r/GUI/Plater.cpp:689
 msgid "SLA print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:757 src/slic3r/GUI/Plater.cpp:6057
+#: src/slic3r/GUI/Plater.cpp:750 src/slic3r/GUI/Plater.cpp:5812
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:772 src/slic3r/GUI/Plater.cpp:3038
-#: src/slic3r/GUI/Plater.cpp:5585
+#: src/slic3r/GUI/Plater.cpp:765 src/slic3r/GUI/Plater.cpp:2993
+#: src/slic3r/GUI/Plater.cpp:5349
 msgid "Slice now"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:927
+#: src/slic3r/GUI/Plater.cpp:920
 msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1072
+#: src/slic3r/GUI/Plater.cpp:1065
 #, possible-c-format
 msgid "%d (%d shells)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1077
+#: src/slic3r/GUI/Plater.cpp:1070
 #, possible-c-format
 msgid "Auto-repaired (%d errors)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1080
+#: src/slic3r/GUI/Plater.cpp:1073
 #, possible-c-format
 msgid ""
 "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
 "facets reversed, %d backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1090
+#: src/slic3r/GUI/Plater.cpp:1083
 msgid "Yes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1111
+#: src/slic3r/GUI/Plater.cpp:1104
 msgid "Used Material (ml)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1114
+#: src/slic3r/GUI/Plater.cpp:1107
 msgid "object(s)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1114
+#: src/slic3r/GUI/Plater.cpp:1107
 msgid "supports and pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1152
+#: src/slic3r/GUI/Plater.cpp:1145
 msgid "Used Filament (in)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1154 src/slic3r/GUI/Plater.cpp:1235
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
 msgid "objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1154 src/slic3r/GUI/Plater.cpp:1235
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
 msgid "wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1174
+#: src/slic3r/GUI/Plater.cpp:1167
 msgid "Used Filament (in³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1233 src/libslic3r/PrintConfig.cpp:1475
-#: src/libslic3r/PrintConfig.cpp:4497 src/libslic3r/PrintConfig.cpp:4498
+#: src/slic3r/GUI/Plater.cpp:1226 src/libslic3r/PrintConfig.cpp:1463
+#: src/libslic3r/PrintConfig.cpp:4390 src/libslic3r/PrintConfig.cpp:4391
 msgid "Cost"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1251
+#: src/slic3r/GUI/Plater.cpp:1244
 msgid "normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1261
+#: src/slic3r/GUI/Plater.cpp:1254
 msgid "stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1429 src/slic3r/GUI/Plater.cpp:4912
+#: src/slic3r/GUI/Plater.cpp:1419
 #, possible-c-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1436 src/slic3r/GUI/Plater.cpp:4919
+#: src/slic3r/GUI/Plater.cpp:1426
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1437 src/slic3r/GUI/Plater.cpp:4920
+#: src/slic3r/GUI/Plater.cpp:1427
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1438 src/slic3r/GUI/Plater.cpp:4921
+#: src/slic3r/GUI/Plater.cpp:1428
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1441 src/slic3r/GUI/Plater.cpp:4924
+#: src/slic3r/GUI/Plater.cpp:1431
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1442 src/slic3r/GUI/Plater.cpp:4925
+#: src/slic3r/GUI/Plater.cpp:1432
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1450 src/slic3r/GUI/Plater.cpp:4933
+#: src/slic3r/GUI/Plater.cpp:1440
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1495 src/slic3r/GUI/Plater.cpp:4970
+#: src/slic3r/GUI/Plater.cpp:1479
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1496 src/slic3r/GUI/Plater.cpp:4971
+#: src/slic3r/GUI/Plater.cpp:1480
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1550 src/slic3r/GUI/Plater.cpp:4783
-#: src/slic3r/GUI/Plater.cpp:5025
+#: src/slic3r/GUI/Plater.cpp:1534 src/slic3r/GUI/Plater.cpp:4735
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1572 src/slic3r/GUI/Plater.cpp:5047
+#: src/slic3r/GUI/Plater.cpp:1556
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1577 src/slic3r/GUI/Plater.cpp:5052
+#: src/slic3r/GUI/Plater.cpp:1561
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1680
+#: src/slic3r/GUI/Plater.cpp:1663
 msgid "Fill bed"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1686
+#: src/slic3r/GUI/Plater.cpp:1669
 msgid "Optimize Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1692
+#: src/slic3r/GUI/Plater.cpp:1675
 msgid "Import SLA archive"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2159
+#: src/slic3r/GUI/Plater.cpp:2127
 #, possible-c-format
 msgid ""
 "Successfully unmounted. The device %s(%s) can now be safely removed from the "
 "computer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2162
+#: src/slic3r/GUI/Plater.cpp:2130
 #, possible-c-format
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2181
+#: src/slic3r/GUI/Plater.cpp:2149
 msgid "New Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2274
+#: src/slic3r/GUI/Plater.cpp:2230
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2347
+#: src/slic3r/GUI/Plater.cpp:2303
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2357
+#: src/slic3r/GUI/Plater.cpp:2313
 msgid "Loading file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2452
+#: src/slic3r/GUI/Plater.cpp:2407
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "this file as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2455 src/slic3r/GUI/Plater.cpp:2508
+#: src/slic3r/GUI/Plater.cpp:2410 src/slic3r/GUI/Plater.cpp:2463
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2462
+#: src/slic3r/GUI/Plater.cpp:2417
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2463
+#: src/slic3r/GUI/Plater.cpp:2418
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2485
+#: src/slic3r/GUI/Plater.cpp:2440
 #, possible-c-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them is"
 "(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2505
+#: src/slic3r/GUI/Plater.cpp:2460
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2522
+#: src/slic3r/GUI/Plater.cpp:2477
 msgid "Loaded"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2624
+#: src/slic3r/GUI/Plater.cpp:2579
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2580
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2687
+#: src/slic3r/GUI/Plater.cpp:2642
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2694
+#: src/slic3r/GUI/Plater.cpp:2649
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2700
+#: src/slic3r/GUI/Plater.cpp:2655
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2706
+#: src/slic3r/GUI/Plater.cpp:2661
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2802
+#: src/slic3r/GUI/Plater.cpp:2757
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2813
+#: src/slic3r/GUI/Plater.cpp:2768
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2885
+#: src/slic3r/GUI/Plater.cpp:2840
 msgid ""
 "The selected object can't be split because it contains more than one volume/"
 "material."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2896
+#: src/slic3r/GUI/Plater.cpp:2851
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3022 src/slic3r/GUI/Plater.cpp:3709
+#: src/slic3r/GUI/Plater.cpp:2977 src/slic3r/GUI/Plater.cpp:3661
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3032
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Ready to slice"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3070 src/slic3r/GUI/PrintHostDialogs.cpp:264
+#: src/slic3r/GUI/Plater.cpp:3025 src/slic3r/GUI/PrintHostDialogs.cpp:262
 msgid "Cancelling"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3089
+#: src/slic3r/GUI/Plater.cpp:3044
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3206
+#: src/slic3r/GUI/Plater.cpp:3161
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3241
+#: src/slic3r/GUI/Plater.cpp:3196
 msgid "It is not allowed to change the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3241
+#: src/slic3r/GUI/Plater.cpp:3196
 msgid "Do you want to retry"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3259
+#: src/slic3r/GUI/Plater.cpp:3214
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3350
+#: src/slic3r/GUI/Plater.cpp:3305
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3355
+#: src/slic3r/GUI/Plater.cpp:3310
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3374
+#: src/slic3r/GUI/Plater.cpp:3329
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3395
+#: src/slic3r/GUI/Plater.cpp:3350
 msgid "Fix Throught NetFabb"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3664
+#: src/slic3r/GUI/Plater.cpp:3619
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3630
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3717 src/slic3r/GUI/PrintHostDialogs.cpp:265
+#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/PrintHostDialogs.cpp:263
 msgid "Cancelled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3981 src/slic3r/GUI/Plater.cpp:4005
+#: src/slic3r/GUI/Plater.cpp:3933 src/slic3r/GUI/Plater.cpp:3957
 msgid "Remove the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3990
+#: src/slic3r/GUI/Plater.cpp:3942
 msgid "Add one more instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3992
+#: src/slic3r/GUI/Plater.cpp:3944
 msgid "Remove one instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3994
+#: src/slic3r/GUI/Plater.cpp:3946
 msgid "Set number of instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3994
+#: src/slic3r/GUI/Plater.cpp:3946
 msgid "Change the number of instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3996
+#: src/slic3r/GUI/Plater.cpp:3948
 msgid "Fill bed with instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3996
+#: src/slic3r/GUI/Plater.cpp:3948
 msgid "Fill the remaining area of bed with instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4015
+#: src/slic3r/GUI/Plater.cpp:3967
 msgid "Reload the selected object from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4018
+#: src/slic3r/GUI/Plater.cpp:3970
 msgid "Export the selected object as STL file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4049
+#: src/slic3r/GUI/Plater.cpp:4001
 msgid "Along X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4049
+#: src/slic3r/GUI/Plater.cpp:4001
 msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4051
+#: src/slic3r/GUI/Plater.cpp:4003
 msgid "Along Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4051
+#: src/slic3r/GUI/Plater.cpp:4003
 msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4053
+#: src/slic3r/GUI/Plater.cpp:4005
 msgid "Along Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4053
+#: src/slic3r/GUI/Plater.cpp:4005
 msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4056
+#: src/slic3r/GUI/Plater.cpp:4008
 msgid "Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4056
+#: src/slic3r/GUI/Plater.cpp:4008
 msgid "Mirror the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4068
+#: src/slic3r/GUI/Plater.cpp:4020
 msgid "To objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4068 src/slic3r/GUI/Plater.cpp:4088
+#: src/slic3r/GUI/Plater.cpp:4020 src/slic3r/GUI/Plater.cpp:4040
 msgid "Split the selected object into individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4070
+#: src/slic3r/GUI/Plater.cpp:4022
 msgid "To parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4070 src/slic3r/GUI/Plater.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:4022 src/slic3r/GUI/Plater.cpp:4058
 msgid "Split the selected object into individual sub-parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4073 src/slic3r/GUI/Plater.cpp:4088
-#: src/slic3r/GUI/Plater.cpp:4106 src/libslic3r/PrintConfig.cpp:5895
+#: src/slic3r/GUI/Plater.cpp:4025 src/slic3r/GUI/Plater.cpp:4040
+#: src/slic3r/GUI/Plater.cpp:4058 src/libslic3r/PrintConfig.cpp:5787
 msgid "Split"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4073
+#: src/slic3r/GUI/Plater.cpp:4025
 msgid "Split the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4095
+#: src/slic3r/GUI/Plater.cpp:4047
 msgid "Optimize orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4048
 msgid "Optimize the rotation of the object for better print results."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4176
+#: src/slic3r/GUI/Plater.cpp:4128
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4548
+#: src/slic3r/GUI/Plater.cpp:4500
 #, possible-c-format
 msgid ""
 "%1% printer was active at the time the target Undo / Redo snapshot was "
 "taken. Switching to %1% printer requires reloading of %1% presets."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4755
+#: src/slic3r/GUI/Plater.cpp:4707
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4787
+#: src/slic3r/GUI/Plater.cpp:4739
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4856
+#: src/slic3r/GUI/Plater.cpp:4808
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4856
+#: src/slic3r/GUI/Plater.cpp:4808
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4857
+#: src/slic3r/GUI/Plater.cpp:4809
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5096
+#: src/slic3r/GUI/Plater.cpp:4863
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5104
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5112
+#: src/slic3r/GUI/Plater.cpp:4879
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5146
+#: src/slic3r/GUI/Plater.cpp:4913
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5177
+#: src/slic3r/GUI/Plater.cpp:4944
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5178
+#: src/slic3r/GUI/Plater.cpp:4945
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5182
+#: src/slic3r/GUI/Plater.cpp:4949
 #, possible-c-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5248
+#: src/slic3r/GUI/Plater.cpp:5015
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5305
+#: src/slic3r/GUI/Plater.cpp:5069
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5305
+#: src/slic3r/GUI/Plater.cpp:5069
 msgid "Save SL1 file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5452
+#: src/slic3r/GUI/Plater.cpp:5216
 #, possible-c-format
 msgid "STL file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5469
+#: src/slic3r/GUI/Plater.cpp:5233
 #, possible-c-format
 msgid "AMF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5472
+#: src/slic3r/GUI/Plater.cpp:5236
 #, possible-c-format
 msgid "Error exporting AMF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5513
+#: src/slic3r/GUI/Plater.cpp:5277
 #, possible-c-format
 msgid "3MF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5518
+#: src/slic3r/GUI/Plater.cpp:5282
 #, possible-c-format
 msgid "Error exporting 3MF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6056
+#: src/slic3r/GUI/Plater.cpp:5811
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6151
+#: src/slic3r/GUI/Plater.cpp:5906
 msgid "Paste From Clipboard"
 msgstr ""
 
@@ -5917,15 +5803,7 @@ msgid ""
 "load the files when invoked."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:93
-msgid "If enabled, sets SuperSlicer as default application to open .3mf files."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:100
-msgid "If enabled, sets SuperSlicer as default application to open .stl files."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:110
+#: src/slic3r/GUI/Preferences.cpp:91
 msgid ""
 "If enabled, Slic3r downloads updates of built-in system presets in the "
 "background. These updates are downloaded into a separate temporary location. "
@@ -5933,356 +5811,336 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:115
+#: src/slic3r/GUI/Preferences.cpp:96
 msgid "Suppress \" - default - \" presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:117
+#: src/slic3r/GUI/Preferences.cpp:98
 msgid ""
 "Suppress \" - default - \" presets in the Print / Filament / Printer "
 "selections once there are any other valid presets available."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:123
+#: src/slic3r/GUI/Preferences.cpp:104
 msgid "Show incompatible print and filament presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:125
+#: src/slic3r/GUI/Preferences.cpp:106
 msgid ""
 "When checked, the print and filament presets are shown in the preset editor "
 "even if they are marked as incompatible with the active printer"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:131
+#: src/slic3r/GUI/Preferences.cpp:112
 msgid "Main GUI always in expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:133
+#: src/slic3r/GUI/Preferences.cpp:114
 msgid ""
 "If enabled, the gui will be in expert mode even if the simple or advanced "
 "mode is selected (but not the setting tabs)."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:138
+#: src/slic3r/GUI/Preferences.cpp:119
 msgid "Show drop project dialog"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:140
+#: src/slic3r/GUI/Preferences.cpp:121
 msgid ""
 "When checked, whenever dragging and dropping a project file on the "
 "application, shows a dialog asking to select the action to take on the file "
 "to load."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:145 src/libslic3r/PrintConfig.cpp:5922
+#: src/slic3r/GUI/Preferences.cpp:126 src/libslic3r/PrintConfig.cpp:5814
 msgid "Single instance mode"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:148
+#: src/slic3r/GUI/Preferences.cpp:129
 msgid ""
 "On OSX there is always only one instance of app running by default. However "
 "it is allowed to run multiple instances of same app from the command line. "
 "In such case this settings will allow only one instance."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:150
+#: src/slic3r/GUI/Preferences.cpp:131
 msgid ""
 "If this is enabled, when starting PrusaSlicer and another instance of the "
 "same PrusaSlicer is already running, that instance will be reactivated "
 "instead."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:167
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
-msgid "Ask for unsaved changes when closing application"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:169
-msgid "When closing the application, always ask for unsaved changes"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:174
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:667
-msgid "Ask for unsaved changes when selecting new preset"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:176
-msgid "Always ask for unsaved changes when selecting new preset"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:184
-msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
+#: src/slic3r/GUI/Preferences.cpp:139
+msgid "Use Retina resolution for the 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:186
+#: src/slic3r/GUI/Preferences.cpp:141
 msgid ""
-"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
-"gcode files."
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:195
-msgid "Use Retina resolution for the 3D scene"
+#: src/slic3r/GUI/Preferences.cpp:158
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
+msgid "Ask for unsaved changes when closing application"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:197
-msgid ""
-"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
-"experiencing 3D performance problems, disabling this option may help."
+#: src/slic3r/GUI/Preferences.cpp:160
+msgid "When closing the application, always ask for unsaved changes"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:205 src/slic3r/GUI/Preferences.cpp:207
-msgid "Show splash screen"
+#: src/slic3r/GUI/Preferences.cpp:165
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+msgid "Ask for unsaved changes when selecting new preset"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:214
-msgid "Enable support for legacy 3DConnexion devices"
+#: src/slic3r/GUI/Preferences.cpp:167
+msgid "Always ask for unsaved changes when selecting new preset"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:216
-msgid ""
-"If enabled, the legacy 3DConnexion devices settings dialog is available by "
-"pressing CTRL+M"
+#: src/slic3r/GUI/Preferences.cpp:173 src/slic3r/GUI/Preferences.cpp:175
+msgid "Show splash screen"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:225
+#: src/slic3r/GUI/Preferences.cpp:182
 msgid "Paths"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:230
+#: src/slic3r/GUI/Preferences.cpp:187
 msgid "FreeCAD path"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:232
+#: src/slic3r/GUI/Preferences.cpp:189
 msgid ""
 "If it point to a valid freecad instance (the bin directory or the python "
 "executable), you can use the built-in python script to quickly generate "
 "geometry."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:240
+#: src/slic3r/GUI/Preferences.cpp:197
 msgid "Camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:246
+#: src/slic3r/GUI/Preferences.cpp:203
 msgid "Use perspective camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:248
+#: src/slic3r/GUI/Preferences.cpp:205
 msgid ""
 "If enabled, use perspective camera. If not enabled, use orthographic camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:253
+#: src/slic3r/GUI/Preferences.cpp:210
 msgid "Use free camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:255
+#: src/slic3r/GUI/Preferences.cpp:212
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:260
+#: src/slic3r/GUI/Preferences.cpp:217
 msgid "Reverse direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:262
+#: src/slic3r/GUI/Preferences.cpp:219
 msgid "If enabled, reverses the direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:269
+#: src/slic3r/GUI/Preferences.cpp:226
 msgid "GUI"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:284
+#: src/slic3r/GUI/Preferences.cpp:237
 msgid "Show sidebar collapse/expand button"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:286
+#: src/slic3r/GUI/Preferences.cpp:239
 msgid ""
 "If enabled, the button for the collapse sidebar will be appeared in top "
 "right corner of the 3D Scene"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:291
+#: src/slic3r/GUI/Preferences.cpp:244
 msgid "Use custom size for toolbar icons"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:293
+#: src/slic3r/GUI/Preferences.cpp:246
 msgid "If enabled, you can change size of toolbar icons manually."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:298
-msgid "Suppress to open hyperlink in browser"
+#: src/slic3r/GUI/Preferences.cpp:252
+msgid "Sequential slider applied only to top layer"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:300
+#: src/slic3r/GUI/Preferences.cpp:254
 msgid ""
-"If enabled, the descriptions of configuration parameters in settings tabs "
-"woldn't work as hyperlinks. If disabled, the descriptions of configuration "
-"parameters in settings tabs will work as hyperlinks."
+"If enabled, changes made using the sequential slider, in preview, apply only "
+"to gcode top layer. If disabled, changes made using the sequential slider, "
+"in preview, apply to the whole gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:307
-msgid "Sequential slider applied only to top layer"
+#: src/slic3r/GUI/Preferences.cpp:260
+msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:309
+#: src/slic3r/GUI/Preferences.cpp:262
 msgid ""
-"If enabled, changes made using the sequential slider, in preview, apply only "
-"to gcode top layer. If disabled, changes made using the sequential slider, "
-"in preview, apply to the whole gcode."
+"If enabled, the descriptions of configuration parameters in settings tabs "
+"woldn't work as hyperlinks. If disabled, the descriptions of configuration "
+"parameters in settings tabs will work as hyperlinks."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:326
+#: src/slic3r/GUI/Preferences.cpp:279
 msgid "Render"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:332
+#: src/slic3r/GUI/Preferences.cpp:285
 msgid "Use environment map"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:334
+#: src/slic3r/GUI/Preferences.cpp:287
 msgid "If enabled, renders object using the environment map."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:368
+#: src/slic3r/GUI/Preferences.cpp:320
 #, possible-c-format
 msgid "You need to restart %s to make the changes effective."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:443
+#: src/slic3r/GUI/Preferences.cpp:397
 msgid "Icon size in a respect to the default size"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:458
+#: src/slic3r/GUI/Preferences.cpp:412
 msgid "Select toolbar icon size in respect to the default one."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:489
+#: src/slic3r/GUI/Preferences.cpp:443
 msgid "Old regular layout with the tab bar"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:490
+#: src/slic3r/GUI/Preferences.cpp:444
 msgid "New layout, access via settings button in the top menu"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:491
+#: src/slic3r/GUI/Preferences.cpp:445
 msgid "Settings in non-modal window"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:500
+#: src/slic3r/GUI/Preferences.cpp:454
 msgid "Layout Options"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:197
-#: src/slic3r/GUI/PresetComboBoxes.cpp:235
-#: src/slic3r/GUI/PresetComboBoxes.cpp:761
-#: src/slic3r/GUI/PresetComboBoxes.cpp:811
-#: src/slic3r/GUI/PresetComboBoxes.cpp:925
-#: src/slic3r/GUI/PresetComboBoxes.cpp:969
+#: src/slic3r/GUI/PresetComboBoxes.cpp:188
+#: src/slic3r/GUI/PresetComboBoxes.cpp:226
+#: src/slic3r/GUI/PresetComboBoxes.cpp:752
+#: src/slic3r/GUI/PresetComboBoxes.cpp:802
+#: src/slic3r/GUI/PresetComboBoxes.cpp:916
+#: src/slic3r/GUI/PresetComboBoxes.cpp:960
 msgid "System presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:239
-#: src/slic3r/GUI/PresetComboBoxes.cpp:815
-#: src/slic3r/GUI/PresetComboBoxes.cpp:973
+#: src/slic3r/GUI/PresetComboBoxes.cpp:230
+#: src/slic3r/GUI/PresetComboBoxes.cpp:806
+#: src/slic3r/GUI/PresetComboBoxes.cpp:964
 msgid "User presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:250
+#: src/slic3r/GUI/PresetComboBoxes.cpp:241
 msgid "Incompatible presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:285
+#: src/slic3r/GUI/PresetComboBoxes.cpp:276
 #, possible-c-format
 msgid "Are you sure you want to delete \"%1%\" printer?"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:287
+#: src/slic3r/GUI/PresetComboBoxes.cpp:278
 msgid "Delete Physical Printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:624
+#: src/slic3r/GUI/PresetComboBoxes.cpp:615
 msgid "Click to edit preset"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:680
-#: src/slic3r/GUI/PresetComboBoxes.cpp:710
+#: src/slic3r/GUI/PresetComboBoxes.cpp:671
+#: src/slic3r/GUI/PresetComboBoxes.cpp:701
 msgid "Add/Remove presets"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:685
-#: src/slic3r/GUI/PresetComboBoxes.cpp:715 src/slic3r/GUI/Tab.cpp:3058
+#: src/slic3r/GUI/PresetComboBoxes.cpp:676
+#: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:3040
 msgid "Add physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:699
+#: src/slic3r/GUI/PresetComboBoxes.cpp:690
 msgid "Edit preset"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:703 src/slic3r/GUI/Tab.cpp:3058
+#: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:3040
 msgid "Edit physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:706
+#: src/slic3r/GUI/PresetComboBoxes.cpp:697
 msgid "Delete physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:826
-#: src/slic3r/GUI/PresetComboBoxes.cpp:987
+#: src/slic3r/GUI/PresetComboBoxes.cpp:817
+#: src/slic3r/GUI/PresetComboBoxes.cpp:978
 msgid "Physical printers"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:850
+#: src/slic3r/GUI/PresetComboBoxes.cpp:841
 msgid "Add/Remove filaments"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:852
+#: src/slic3r/GUI/PresetComboBoxes.cpp:843
 msgid "Add/Remove materials"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:854
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1011
+#: src/slic3r/GUI/PresetComboBoxes.cpp:845
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1002
 msgid "Add/Remove printers"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:44
+#: src/slic3r/GUI/PresetHints.cpp:43
 #, possible-c-format
 msgid "will run at %1%%% by default"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:47 src/slic3r/GUI/PresetHints.cpp:73
-#: src/slic3r/GUI/PresetHints.cpp:75
+#: src/slic3r/GUI/PresetHints.cpp:46 src/slic3r/GUI/PresetHints.cpp:72
+#: src/slic3r/GUI/PresetHints.cpp:74
 #, possible-c-format
 msgid "at %1%%% over external perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:50 src/slic3r/GUI/PresetHints.cpp:78
+#: src/slic3r/GUI/PresetHints.cpp:49 src/slic3r/GUI/PresetHints.cpp:77
 #, possible-c-format
 msgid "at %1%%% over top fill surfaces"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:53 src/slic3r/GUI/PresetHints.cpp:81
-#: src/slic3r/GUI/PresetHints.cpp:83
+#: src/slic3r/GUI/PresetHints.cpp:52 src/slic3r/GUI/PresetHints.cpp:80
+#: src/slic3r/GUI/PresetHints.cpp:82
 #, possible-c-format
 msgid "at %1%%% over bridges"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:56 src/slic3r/GUI/PresetHints.cpp:86
-#: src/slic3r/GUI/PresetHints.cpp:101
+#: src/slic3r/GUI/PresetHints.cpp:55 src/slic3r/GUI/PresetHints.cpp:85
+#: src/slic3r/GUI/PresetHints.cpp:100
 #, possible-c-format
 msgid "except for the first %1% layers where the fan is disabled"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:58 src/slic3r/GUI/PresetHints.cpp:88
-#: src/slic3r/GUI/PresetHints.cpp:103
+#: src/slic3r/GUI/PresetHints.cpp:57 src/slic3r/GUI/PresetHints.cpp:87
+#: src/slic3r/GUI/PresetHints.cpp:102
 msgid "except for the first layer where the fan is disabled"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:61
+#: src/slic3r/GUI/PresetHints.cpp:60
 msgid "will be turned off by default."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:68
+#: src/slic3r/GUI/PresetHints.cpp:67
 #, possible-c-format
 msgid ""
 "\n"
@@ -6291,11 +6149,11 @@ msgid ""
 "will run at a proportionally increasing speed between %3%%% and %4%%%"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:75 src/slic3r/GUI/PresetHints.cpp:83
+#: src/slic3r/GUI/PresetHints.cpp:74 src/slic3r/GUI/PresetHints.cpp:82
 msgid "if it's above the current computed fan speed value"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:94
+#: src/slic3r/GUI/PresetHints.cpp:93
 #, possible-c-format
 msgid ""
 "\n"
@@ -6303,229 +6161,229 @@ msgid ""
 "If estimated layer time is below ~%1%s"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:97
+#: src/slic3r/GUI/PresetHints.cpp:96
 #, possible-c-format
 msgid "fan will run by default to %1%%%"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:108
+#: src/slic3r/GUI/PresetHints.cpp:107
 #, possible-c-format
 msgid ""
 "print speed will be reduced so that no less than %1%s are spent on that layer"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:112
+#: src/slic3r/GUI/PresetHints.cpp:111
 #, possible-c-format
 msgid ""
 "(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:115
+#: src/slic3r/GUI/PresetHints.cpp:114
 #, possible-c-format
 msgid "(however, speed will never be reduced below %1%mm/s)"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:237
+#: src/slic3r/GUI/PresetHints.cpp:236
 msgid "external perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:246
+#: src/slic3r/GUI/PresetHints.cpp:245
 msgid "perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:255
+#: src/slic3r/GUI/PresetHints.cpp:254
 msgid "infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:265
+#: src/slic3r/GUI/PresetHints.cpp:264
 msgid "solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:273
+#: src/slic3r/GUI/PresetHints.cpp:272
 msgid "top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:284
+#: src/slic3r/GUI/PresetHints.cpp:283
 msgid "support"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:294
+#: src/slic3r/GUI/PresetHints.cpp:293
 msgid "support interface"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:300
+#: src/slic3r/GUI/PresetHints.cpp:299
 msgid "First layer volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:300
+#: src/slic3r/GUI/PresetHints.cpp:299
 msgid "Bridging volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:300
+#: src/slic3r/GUI/PresetHints.cpp:299
 msgid "Volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:301
+#: src/slic3r/GUI/PresetHints.cpp:300
 msgid "flow rate is maximized"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:304
+#: src/slic3r/GUI/PresetHints.cpp:303
 msgid "by the print profile maximum"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:305
+#: src/slic3r/GUI/PresetHints.cpp:304
 msgid "when printing"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:306
+#: src/slic3r/GUI/PresetHints.cpp:305
 msgid "with a volumetric rate"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:310
+#: src/slic3r/GUI/PresetHints.cpp:309
 #, possible-c-format
 msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:328
+#: src/slic3r/GUI/PresetHints.cpp:327
 msgid ""
 "Recommended object min thin wall thickness: Not available due to invalid "
 "layer height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:347
+#: src/slic3r/GUI/PresetHints.cpp:346
 #, possible-c-format
 msgid "Recommended object min (thick) wall thickness for layer height %.2f and"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:348 src/slic3r/GUI/PresetHints.cpp:353
+#: src/slic3r/GUI/PresetHints.cpp:347 src/slic3r/GUI/PresetHints.cpp:352
 #, possible-c-format
 msgid "%d perimeter: %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:358
+#: src/slic3r/GUI/PresetHints.cpp:357
 msgid ""
 "Recommended object thin wall thickness: Not available due to excessively "
 "small extrusion width."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:382
+#: src/slic3r/GUI/PresetHints.cpp:381
 msgid ""
 "Ideally, the spacing between two extrusions shouldn't be lower than the "
 "nozzle diameter. Below are the extrusion widths for a spacing equal to the "
 "nozzle diameter.\n"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:383
+#: src/slic3r/GUI/PresetHints.cpp:382
 msgid ""
 "Recommended min extrusion width for the first layer (with a first layer "
 "height of %1%) is %2$.3f mm (or %3%%%)\n"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:385
+#: src/slic3r/GUI/PresetHints.cpp:384
 msgid ""
 "Recommended min extrusion width for other layers (with a layer height of %"
 "1%) is %2$.3f mm (or %3%%%).\n"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:414
+#: src/slic3r/GUI/PresetHints.cpp:413
 msgid ""
 "Top / bottom shell thickness hint: Not available due to invalid layer height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:427
+#: src/slic3r/GUI/PresetHints.cpp:426
 #, possible-c-format
 msgid "Top shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:430
+#: src/slic3r/GUI/PresetHints.cpp:429
 #, possible-c-format
 msgid "Minimum top shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:433
+#: src/slic3r/GUI/PresetHints.cpp:432
 msgid "Top is open."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:446
+#: src/slic3r/GUI/PresetHints.cpp:445
 #, possible-c-format
 msgid "Bottom shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:449
+#: src/slic3r/GUI/PresetHints.cpp:448
 #, possible-c-format
 msgid "Minimum bottom shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:452
+#: src/slic3r/GUI/PresetHints.cpp:451
 msgid "Bottom is open."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:35
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
 msgid "Send G-Code to printer host"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:35
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:37
+#: src/slic3r/GUI/PrintHostDialogs.cpp:36
 msgid "Start printing after upload"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:45
+#: src/slic3r/GUI/PrintHostDialogs.cpp:44
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:58
+#: src/slic3r/GUI/PrintHostDialogs.cpp:57
 msgid "Group"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:178
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
 msgid "ID"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:179
+#: src/slic3r/GUI/PrintHostDialogs.cpp:177
 msgid "Progress"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:180
+#: src/slic3r/GUI/PrintHostDialogs.cpp:178
 msgid "Status"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:181
+#: src/slic3r/GUI/PrintHostDialogs.cpp:179
 msgid "Host"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:182
+#: src/slic3r/GUI/PrintHostDialogs.cpp:180
 msgid "Filename"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:183
+#: src/slic3r/GUI/PrintHostDialogs.cpp:181
 msgid "Error Message"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:186
+#: src/slic3r/GUI/PrintHostDialogs.cpp:184
 msgid "Cancel selected"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:188
+#: src/slic3r/GUI/PrintHostDialogs.cpp:186
 msgid "Show error message"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:230
-#: src/slic3r/GUI/PrintHostDialogs.cpp:261
+#: src/slic3r/GUI/PrintHostDialogs.cpp:228
+#: src/slic3r/GUI/PrintHostDialogs.cpp:259
 msgid "Enqueued"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:262
+#: src/slic3r/GUI/PrintHostDialogs.cpp:260
 msgid "Uploading"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:266
+#: src/slic3r/GUI/PrintHostDialogs.cpp:264
 msgid "Completed"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:304
+#: src/slic3r/GUI/PrintHostDialogs.cpp:302
 msgid "Error uploading to print host:"
 msgstr ""
 
@@ -6534,13 +6392,13 @@ msgid "NO RAMMING AT ALL"
 msgstr ""
 
 #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
-#: src/libslic3r/PrintConfig.cpp:1334 src/libslic3r/PrintConfig.cpp:1378
-#: src/libslic3r/PrintConfig.cpp:1393 src/libslic3r/PrintConfig.cpp:2233
-#: src/libslic3r/PrintConfig.cpp:2249 src/libslic3r/PrintConfig.cpp:4395
-#: src/libslic3r/PrintConfig.cpp:4404 src/libslic3r/PrintConfig.cpp:4514
-#: src/libslic3r/PrintConfig.cpp:4522 src/libslic3r/PrintConfig.cpp:4530
-#: src/libslic3r/PrintConfig.cpp:4537 src/libslic3r/PrintConfig.cpp:4545
-#: src/libslic3r/PrintConfig.cpp:4553
+#: src/libslic3r/PrintConfig.cpp:1322 src/libslic3r/PrintConfig.cpp:1366
+#: src/libslic3r/PrintConfig.cpp:1381 src/libslic3r/PrintConfig.cpp:2132
+#: src/libslic3r/PrintConfig.cpp:2148 src/libslic3r/PrintConfig.cpp:4288
+#: src/libslic3r/PrintConfig.cpp:4297 src/libslic3r/PrintConfig.cpp:4407
+#: src/libslic3r/PrintConfig.cpp:4415 src/libslic3r/PrintConfig.cpp:4423
+#: src/libslic3r/PrintConfig.cpp:4430 src/libslic3r/PrintConfig.cpp:4438
+#: src/libslic3r/PrintConfig.cpp:4446
 msgid "s"
 msgstr ""
 
@@ -6548,8 +6406,8 @@ msgstr ""
 msgid "Volumetric speed"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:1190
-#: src/libslic3r/PrintConfig.cpp:2446
+#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:1178
+#: src/libslic3r/PrintConfig.cpp:2345
 msgid "mm³/s"
 msgstr ""
 
@@ -6582,7 +6440,7 @@ msgstr ""
 #: src/slic3r/GUI/SavePresetDialog.cpp:136
 #, possible-c-format
 msgid ""
-"Preset with name \"%1%\" already exists and is incompatible with selected "
+"Preset with name \"%1%\" already exists and is imcopatible with selected "
 "printer."
 msgstr ""
 
@@ -6626,11 +6484,11 @@ msgstr ""
 msgid "Just switch to \"%1%\" preset"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2465
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2447
 msgid "Stealth"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2459
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2441
 msgid "Normal"
 msgstr ""
 
@@ -6678,142 +6536,142 @@ msgstr ""
 msgid "Set Unprintable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:82
+#: src/slic3r/GUI/SysInfoDialog.cpp:81
 msgid "System Information"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:158
+#: src/slic3r/GUI/SysInfoDialog.cpp:157
 msgid "Copy to Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:119 src/libslic3r/PrintConfig.cpp:506
+#: src/slic3r/GUI/Tab.cpp:118 src/libslic3r/PrintConfig.cpp:491
 msgid "Compatible printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:120
+#: src/slic3r/GUI/Tab.cpp:119
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:125 src/libslic3r/PrintConfig.cpp:521
+#: src/slic3r/GUI/Tab.cpp:124 src/libslic3r/PrintConfig.cpp:506
 msgid "Compatible print profiles"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:126
+#: src/slic3r/GUI/Tab.cpp:125
 msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
 #. TRN "Save current Settings"
-#: src/slic3r/GUI/Tab.cpp:221
+#: src/slic3r/GUI/Tab.cpp:220
 #, possible-c-format
 msgid "Save current %s"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:222
+#: src/slic3r/GUI/Tab.cpp:221
 msgid "Delete this preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:226
+#: src/slic3r/GUI/Tab.cpp:225
 msgid ""
 "Hover the cursor over buttons to find more information \n"
 "or click this button."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:230
+#: src/slic3r/GUI/Tab.cpp:229
 #, possible-c-format
 msgid "Search in settings [%1%]"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1252
+#: src/slic3r/GUI/Tab.cpp:1240
 msgid "Detach from system preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1265
+#: src/slic3r/GUI/Tab.cpp:1253
 msgid ""
 "A copy of the current system preset will be created, which will be detached "
 "from the system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1266
+#: src/slic3r/GUI/Tab.cpp:1254
 msgid ""
 "The current custom preset will be detached from the parent system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1269
+#: src/slic3r/GUI/Tab.cpp:1257
 msgid "Modifications to the current profile will be saved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1272
+#: src/slic3r/GUI/Tab.cpp:1260
 msgid ""
 "This action is not revertable.\n"
 "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1274
+#: src/slic3r/GUI/Tab.cpp:1262
 msgid "Detach preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1300
+#: src/slic3r/GUI/Tab.cpp:1288
 msgid "This is a default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1302
+#: src/slic3r/GUI/Tab.cpp:1290
 msgid "This is a system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1304
+#: src/slic3r/GUI/Tab.cpp:1292
 msgid "Current preset is inherited from the default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1308
+#: src/slic3r/GUI/Tab.cpp:1294
 msgid "Current preset is inherited from"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1312
+#: src/slic3r/GUI/Tab.cpp:1298
 msgid "It can't be deleted or modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1313
+#: src/slic3r/GUI/Tab.cpp:1299
 msgid ""
 "Any modifications should be saved as a new preset inherited from this one."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1314
+#: src/slic3r/GUI/Tab.cpp:1300
 msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1318
+#: src/slic3r/GUI/Tab.cpp:1304
 msgid "Additional information:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1324
+#: src/slic3r/GUI/Tab.cpp:1310
 msgid "printer model"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1332
+#: src/slic3r/GUI/Tab.cpp:1318
 msgid "default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1335
+#: src/slic3r/GUI/Tab.cpp:1321
 msgid "default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1349
+#: src/slic3r/GUI/Tab.cpp:1335
 msgid "default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1353
+#: src/slic3r/GUI/Tab.cpp:1339
 msgid "default SLA print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1361
+#: src/slic3r/GUI/Tab.cpp:1347
 msgid "full profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1362
+#: src/slic3r/GUI/Tab.cpp:1348
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1554
+#: src/slic3r/GUI/Tab.cpp:1540
 msgid ""
 "Single Extruder Multi Material is selected, \n"
 "and all extruders must have the same diameter.\n"
@@ -6821,12 +6679,12 @@ msgid ""
 "nozzle diameter value?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1557 src/slic3r/GUI/Tab.cpp:1940
-#: src/libslic3r/PrintConfig.cpp:2553
+#: src/slic3r/GUI/Tab.cpp:1543 src/slic3r/GUI/Tab.cpp:1922
+#: src/libslic3r/PrintConfig.cpp:2452
 msgid "Nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1853
+#: src/slic3r/GUI/Tab.cpp:1835
 msgid ""
 "Note: All parameters from this group are moved to the Physical Printer "
 "settings (see changelog).\n"
@@ -6839,184 +6697,184 @@ msgid ""
 "physical_printer directory."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1872
+#: src/slic3r/GUI/Tab.cpp:1854
 msgid "Ramming settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1908
+#: src/slic3r/GUI/Tab.cpp:1890
 msgid "Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1909
+#: src/slic3r/GUI/Tab.cpp:1891
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1918
+#: src/slic3r/GUI/Tab.cpp:1900
 msgid "Milling cutters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1919
+#: src/slic3r/GUI/Tab.cpp:1901
 msgid "Number of milling heads."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1938
+#: src/slic3r/GUI/Tab.cpp:1920
 msgid ""
 "This is a single extruder multimaterial printer, diameters of all extruders "
 "will be set to the new value. Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1963
+#: src/slic3r/GUI/Tab.cpp:1945
 msgid "Reset to Filament Color"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2100
+#: src/slic3r/GUI/Tab.cpp:2082
 msgid "Filament Overrides"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2220
+#: src/slic3r/GUI/Tab.cpp:2202
 msgid "Volumetric flow hints not available"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2432 src/slic3r/GUI/Tab.cpp:2538
+#: src/slic3r/GUI/Tab.cpp:2414 src/slic3r/GUI/Tab.cpp:2520
 msgid "Machine limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2435
+#: src/slic3r/GUI/Tab.cpp:2417
 msgid "not-marlin/lerdge firmware compensation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2438
+#: src/slic3r/GUI/Tab.cpp:2420
 msgid "Machine Limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2458
+#: src/slic3r/GUI/Tab.cpp:2440
 msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2464
+#: src/slic3r/GUI/Tab.cpp:2446
 msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2474
+#: src/slic3r/GUI/Tab.cpp:2456
 msgid "Maximum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2482
+#: src/slic3r/GUI/Tab.cpp:2464
 msgid "Maximum accelerations"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2490
+#: src/slic3r/GUI/Tab.cpp:2472
 msgid "Jerk limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2495
+#: src/slic3r/GUI/Tab.cpp:2477
 msgid "Minimum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2566 src/slic3r/GUI/Tab.cpp:2575
+#: src/slic3r/GUI/Tab.cpp:2548 src/slic3r/GUI/Tab.cpp:2557
 msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2576
+#: src/slic3r/GUI/Tab.cpp:2558
 msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2582
+#: src/slic3r/GUI/Tab.cpp:2564
 msgid "Advanced wipe tower purge volume calculs"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2811
+#: src/slic3r/GUI/Tab.cpp:2793
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2813
+#: src/slic3r/GUI/Tab.cpp:2795
 msgid "Firmware Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3444
+#: src/slic3r/GUI/Tab.cpp:3421
 msgid "Detached"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3511
+#: src/slic3r/GUI/Tab.cpp:3488
 msgid "remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3511
+#: src/slic3r/GUI/Tab.cpp:3488
 msgid "delete"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3520
+#: src/slic3r/GUI/Tab.cpp:3497
 msgid "It's a last preset for this physical printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3525
+#: src/slic3r/GUI/Tab.cpp:3502
 #, possible-c-format
 msgid ""
 "Are you sure you want to delete \"%1%\" preset from the physical printer \"%"
 "2%\"?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3537
+#: src/slic3r/GUI/Tab.cpp:3514
 msgid ""
 "The physical printer(s) below is based on the preset, you are going to "
 "delete."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3541
+#: src/slic3r/GUI/Tab.cpp:3518
 msgid ""
 "Note, that selected preset will be deleted from this/those printer(s) too."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3545
+#: src/slic3r/GUI/Tab.cpp:3522
 msgid ""
 "The physical printer(s) below is based only on the preset, you are going to "
 "delete."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3549
+#: src/slic3r/GUI/Tab.cpp:3526
 msgid ""
 "Note, that this/those printer(s) will be deleted after deleting of the "
 "selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3553
+#: src/slic3r/GUI/Tab.cpp:3530
 #, possible-c-format
 msgid "Are you sure you want to %1% the selected preset?"
 msgstr ""
 
 #. TRN  Remove/Delete
-#: src/slic3r/GUI/Tab.cpp:3558
+#: src/slic3r/GUI/Tab.cpp:3535
 #, possible-c-format
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3639 src/slic3r/GUI/Tab.cpp:3711
+#: src/slic3r/GUI/Tab.cpp:3616 src/slic3r/GUI/Tab.cpp:3688
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3776
+#: src/slic3r/GUI/Tab.cpp:3753
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time. "
 "They are also used as safegard when generating gcode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3778 src/slic3r/GUI/Tab.cpp:3786
-#: src/slic3r/GUI/Tab.cpp:3790
+#: src/slic3r/GUI/Tab.cpp:3755 src/slic3r/GUI/Tab.cpp:3763
+#: src/slic3r/GUI/Tab.cpp:3767
 msgid ""
 "(even if the acceleration is set to 3000 in the print profile, if this is at "
 "1500, it won't export a gcode that will tell to go over 1500)."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3780
+#: src/slic3r/GUI/Tab.cpp:3757
 msgid ""
 "Grey values means that they can't be send to your firmware (no g-code "
 "available)."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3783
+#: src/slic3r/GUI/Tab.cpp:3760
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -7024,31 +6882,31 @@ msgid ""
 "generating gcode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3789
+#: src/slic3r/GUI/Tab.cpp:3766
 msgid "Machine limits are used as safegard when generating gcode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3793
+#: src/slic3r/GUI/Tab.cpp:3770
 msgid "Machine limits are disabled. They are not used for anything."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3865
+#: src/slic3r/GUI/Tab.cpp:3842
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3867
+#: src/slic3r/GUI/Tab.cpp:3844
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3869
+#: src/slic3r/GUI/Tab.cpp:3846
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3871
+#: src/slic3r/GUI/Tab.cpp:3848
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -7056,23 +6914,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3876
+#: src/slic3r/GUI/Tab.cpp:3853
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:3878
+#: src/slic3r/GUI/Tab.cpp:3855
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3881
+#: src/slic3r/GUI/Tab.cpp:3858
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:3883
+#: src/slic3r/GUI/Tab.cpp:3860
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -7080,13 +6938,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3893
+#: src/slic3r/GUI/Tab.cpp:3870
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3895
+#: src/slic3r/GUI/Tab.cpp:3872
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -7094,17 +6952,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3898
+#: src/slic3r/GUI/Tab.cpp:3875
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3901
+#: src/slic3r/GUI/Tab.cpp:3878
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3903
+#: src/slic3r/GUI/Tab.cpp:3880
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -7112,249 +6970,249 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3909
+#: src/slic3r/GUI/Tab.cpp:3886
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3910
+#: src/slic3r/GUI/Tab.cpp:3887
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3916
+#: src/slic3r/GUI/Tab.cpp:3893
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3917
+#: src/slic3r/GUI/Tab.cpp:3894
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4063 src/slic3r/GUI/Tab.cpp:4065
+#: src/slic3r/GUI/Tab.cpp:4040 src/slic3r/GUI/Tab.cpp:4042
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/Tab.cpp:4077
 msgid "Exposure"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4104
+#: src/slic3r/GUI/Tab.cpp:4081
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4120 src/slic3r/GUI/Tab.cpp:4121
+#: src/slic3r/GUI/Tab.cpp:4097 src/slic3r/GUI/Tab.cpp:4098
 msgid "Notes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4128 src/slic3r/GUI/Tab.cpp:4261
+#: src/slic3r/GUI/Tab.cpp:4105 src/slic3r/GUI/Tab.cpp:4238
 msgid "Dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4129 src/slic3r/GUI/Tab.cpp:4262
+#: src/slic3r/GUI/Tab.cpp:4106 src/slic3r/GUI/Tab.cpp:4239
 msgid "Profile dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4179
+#: src/slic3r/GUI/Tab.cpp:4156
 msgid "Layers and perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4189
+#: src/slic3r/GUI/Tab.cpp:4166
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4194
+#: src/slic3r/GUI/Tab.cpp:4171
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4217
+#: src/slic3r/GUI/Tab.cpp:4194
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4222
+#: src/slic3r/GUI/Tab.cpp:4199
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4244 src/slic3r/GUI/Tab.cpp:4245
+#: src/slic3r/GUI/Tab.cpp:4221 src/slic3r/GUI/Tab.cpp:4222
 #: src/libslic3r/SLA/Hollowing.cpp:45 src/libslic3r/SLA/Hollowing.cpp:57
 #: src/libslic3r/SLA/Hollowing.cpp:66 src/libslic3r/SLA/Hollowing.cpp:75
 msgid "Hollowing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4251
+#: src/slic3r/GUI/Tab.cpp:4228
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4255
+#: src/slic3r/GUI/Tab.cpp:4232
 msgid "Output options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4256
+#: src/slic3r/GUI/Tab.cpp:4233
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4296
+#: src/slic3r/GUI/Tab.cpp:4273
 #, possible-c-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298 src/libslic3r/PrintConfig.cpp:4761
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4654
 msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298 src/libslic3r/PrintConfig.cpp:4865
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4758
 msgid "Pad around object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:378 src/slic3r/GUI/Tab.hpp:511
+#: src/slic3r/GUI/Tab.hpp:377 src/slic3r/GUI/Tab.hpp:510
 msgid "Print Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:410
+#: src/slic3r/GUI/Tab.hpp:409
 msgid "Filament Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:460
+#: src/slic3r/GUI/Tab.hpp:459
 msgid "Printer Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:495
+#: src/slic3r/GUI/Tab.hpp:494
 msgid "Material Settings"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:144
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:852
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:137
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:146
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:532
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
 msgid "PrusaSlicer is closing: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:549
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:615
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:616
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:647
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:648
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:669
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
 msgid ""
 "You will not be asked about the unsaved changes the next time you close "
 "PrusaSlicer."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:672
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
 msgid ""
 "You will not be asked about the unsaved changes the next time you switch a "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:673
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
 #, possible-c-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:675
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:742
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:747
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:747
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:751
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
 #, possible-c-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:752
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:745
 #, possible-c-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1033
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1025
 msgid "The following presets were modified:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1038
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1030
 #, possible-c-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1042
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1034
 #, possible-c-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1043
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1035
 #, possible-c-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1089
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1095
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1088
 msgid "Capabilities"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1212
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1199
 msgid "Old value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1213
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
 msgid "New value"
 msgstr ""
 
@@ -7592,12 +7450,12 @@ msgstr ""
 msgid "Show advanced settings"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:628
+#: src/slic3r/GUI/wxExtensions.cpp:624
 #, possible-c-format
 msgid "Switch to the %s mode"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:629
+#: src/slic3r/GUI/wxExtensions.cpp:625
 #, possible-c-format
 msgid "Current mode is %s"
 msgstr ""
@@ -7803,28 +7661,28 @@ msgstr ""
 msgid "Open G-code file:"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:652
+#: src/libslic3r/GCode.cpp:640
 msgid "There is an object with no extrusions on the first layer."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:670
+#: src/libslic3r/GCode.cpp:658
 msgid "Empty layers detected, the output would not be printable."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:671
+#: src/libslic3r/GCode.cpp:659
 msgid "Print z"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:672
+#: src/libslic3r/GCode.cpp:660
 msgid ""
 "This is usually caused by negligibly small extrusions or by a faulty model. "
 "Try to repair the model or change its orientation on the bed."
 msgstr ""
 
 #: src/libslic3r/ExtrusionEntity.cpp:277 src/libslic3r/ExtrusionEntity.cpp:310
-#: src/libslic3r/PrintConfig.cpp:722 src/libslic3r/PrintConfig.cpp:749
-#: src/libslic3r/PrintConfig.cpp:768 src/libslic3r/PrintConfig.cpp:2169
-#: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:3616
+#: src/libslic3r/PrintConfig.cpp:709 src/libslic3r/PrintConfig.cpp:737
+#: src/libslic3r/PrintConfig.cpp:756 src/libslic3r/PrintConfig.cpp:2068
+#: src/libslic3r/PrintConfig.cpp:2070 src/libslic3r/PrintConfig.cpp:3509
 msgid "Ironing"
 msgstr ""
 
@@ -7976,116 +7834,116 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Preset.cpp:1507
+#: src/libslic3r/Preset.cpp:1471
 msgid "filament"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1355
+#: src/libslic3r/Print.cpp:1351
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1358
+#: src/libslic3r/Print.cpp:1354
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1362
+#: src/libslic3r/Print.cpp:1358
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1364
+#: src/libslic3r/Print.cpp:1360
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1373
+#: src/libslic3r/Print.cpp:1369
 msgid "The Spiral Vase option can only be used when printing a single object."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1380
+#: src/libslic3r/Print.cpp:1376
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1393
+#: src/libslic3r/Print.cpp:1389
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1399
+#: src/libslic3r/Print.cpp:1395
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
 "and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1401
+#: src/libslic3r/Print.cpp:1397
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1403
+#: src/libslic3r/Print.cpp:1399
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1405
+#: src/libslic3r/Print.cpp:1401
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1407
+#: src/libslic3r/Print.cpp:1403
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1428
+#: src/libslic3r/Print.cpp:1424
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1430
+#: src/libslic3r/Print.cpp:1426
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1434
+#: src/libslic3r/Print.cpp:1430
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1436
+#: src/libslic3r/Print.cpp:1432
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1478
+#: src/libslic3r/Print.cpp:1474
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1504
+#: src/libslic3r/Print.cpp:1500
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1513
+#: src/libslic3r/Print.cpp:1509
 #, possible-c-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1516
+#: src/libslic3r/Print.cpp:1512
 #, possible-c-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1527
+#: src/libslic3r/Print.cpp:1523
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -8093,13 +7951,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1535
+#: src/libslic3r/Print.cpp:1531
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1539
+#: src/libslic3r/Print.cpp:1535
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -8107,31 +7965,31 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1561
+#: src/libslic3r/Print.cpp:1557
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1566
+#: src/libslic3r/Print.cpp:1562
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1726
+#: src/libslic3r/Print.cpp:1722
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1756
+#: src/libslic3r/Print.cpp:1752
 msgid "Generating skirt"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1813
+#: src/libslic3r/Print.cpp:1809
 msgid "Generating brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1875
+#: src/libslic3r/Print.cpp:1871
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1879
+#: src/libslic3r/Print.cpp:1875
 msgid "Generating G-code"
 msgstr ""
 
@@ -8139,34 +7997,34 @@ msgstr ""
 msgid "Pad brim size is too small for the current configuration."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:630
+#: src/libslic3r/SLAPrint.cpp:628
 msgid ""
 "Cannot proceed without support points! Add support points or disable support "
 "generation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:642
+#: src/libslic3r/SLAPrint.cpp:640
 msgid ""
 "Elevation is too low for object. Use the \"Pad around object\" feature to "
 "print the object without elevation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:648
+#: src/libslic3r/SLAPrint.cpp:646
 msgid ""
 "The endings of the support pillars will be deployed on the gap between the "
 "object and the pad. 'Support base safety distance' has to be greater than "
 "the 'Pad object gap' parameter to avoid this."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:663
+#: src/libslic3r/SLAPrint.cpp:661
 msgid "Exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:670
+#: src/libslic3r/SLAPrint.cpp:668
 msgid "Initial exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:786
+#: src/libslic3r/SLAPrint.cpp:784
 msgid "Slicing done"
 msgstr ""
 
@@ -8329,123 +8187,112 @@ msgid ""
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:140 src/libslic3r/PrintConfig.cpp:2595
+#: src/libslic3r/PrintConfig.cpp:140 src/libslic3r/PrintConfig.cpp:2494
 msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:142
+#: src/libslic3r/PrintConfig.cpp:142 src/libslic3r/PrintConfig.cpp:2496
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
-"the hostname, IP address or URL of the printer host instance. Print host "
-"behind HAProxy with basic auth enabled can be accessed by putting the user "
-"name and password into the URL in the following format: https://username:"
-"password@your-octopi-address/"
+"the hostname, IP address or URL of the printer host instance."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:150 src/libslic3r/PrintConfig.cpp:2580
+#: src/libslic3r/PrintConfig.cpp:148 src/libslic3r/PrintConfig.cpp:2479
 msgid "API Key / Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:152 src/libslic3r/PrintConfig.cpp:2582
+#: src/libslic3r/PrintConfig.cpp:150 src/libslic3r/PrintConfig.cpp:2481
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the API Key or the password required for authentication."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:159
+#: src/libslic3r/PrintConfig.cpp:157
 msgid "Name of the printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:167 src/libslic3r/PrintConfig.cpp:2589
+#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:2488
 msgid ""
 "Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
 "in crt/pem format. If left blank, the default OS CA certificate repository "
 "is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:182
+#: src/libslic3r/PrintConfig.cpp:180
 msgid "Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:188
+#: src/libslic3r/PrintConfig.cpp:186
 msgid "Printer preset name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:189
+#: src/libslic3r/PrintConfig.cpp:187
 msgid "Related printer preset name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:194
+#: src/libslic3r/PrintConfig.cpp:192
 msgid "Authorization Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:199
-msgid "API key"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:200
-msgid "HTTP digest"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:213 src/libslic3r/PrintConfig.cpp:214
+#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:212
 msgid "Allow empty layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:216
+#: src/libslic3r/PrintConfig.cpp:214
 msgid ""
 "Do not prevent the gcode builder to trigger an exception if a full layer is "
 "empty and so the print will have to start from thin air afterward."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:221
+#: src/libslic3r/PrintConfig.cpp:219
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:223
+#: src/libslic3r/PrintConfig.cpp:221
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:230 src/libslic3r/PrintConfig.cpp:231
+#: src/libslic3r/PrintConfig.cpp:228 src/libslic3r/PrintConfig.cpp:229
 msgid "Don't avoid crossing on 1st layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:233
+#: src/libslic3r/PrintConfig.cpp:231
 msgid "Do not use the 'Avoid crossing perimeters' on the first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:238 src/libslic3r/PrintConfig.cpp:3670
+#: src/libslic3r/PrintConfig.cpp:236 src/libslic3r/PrintConfig.cpp:3563
 msgid "Other layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:240
+#: src/libslic3r/PrintConfig.cpp:238
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:243
+#: src/libslic3r/PrintConfig.cpp:241
 msgid "Bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:250
+#: src/libslic3r/PrintConfig.cpp:248
 msgid "Before layer change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:252
+#: src/libslic3r/PrintConfig.cpp:250
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:262
+#: src/libslic3r/PrintConfig.cpp:260
 msgid "Between objects G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:264
+#: src/libslic3r/PrintConfig.cpp:262
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
@@ -8455,33 +8302,33 @@ msgid ""
 "[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:275
+#: src/libslic3r/PrintConfig.cpp:273
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:276
+#: src/libslic3r/PrintConfig.cpp:274
 msgid "Bottom solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:283
+#: src/libslic3r/PrintConfig.cpp:281
 msgid ""
 "The number of bottom solid layers is increased above bottom_solid_layers if "
 "necessary to satisfy minimum thickness of bottom shell."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:285
+#: src/libslic3r/PrintConfig.cpp:283
 msgid "Minimum bottom shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:291 src/libslic3r/PrintConfig.cpp:341
+#: src/libslic3r/PrintConfig.cpp:289 src/libslic3r/PrintConfig.cpp:339
 msgid "Bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:292
+#: src/libslic3r/PrintConfig.cpp:290
 msgid "Bridge acceleration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:294
+#: src/libslic3r/PrintConfig.cpp:292
 #, possible-c-format
 msgid ""
 "This is the acceleration your printer will use for bridges.\n"
@@ -8489,42 +8336,42 @@ msgid ""
 "Set zero to disable acceleration control for bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:614
-#: src/libslic3r/PrintConfig.cpp:1673 src/libslic3r/PrintConfig.cpp:1882
-#: src/libslic3r/PrintConfig.cpp:2733
+#: src/libslic3r/PrintConfig.cpp:295 src/libslic3r/PrintConfig.cpp:599
+#: src/libslic3r/PrintConfig.cpp:1661 src/libslic3r/PrintConfig.cpp:1859
+#: src/libslic3r/PrintConfig.cpp:2633
 msgid "mm/s² or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:303
+#: src/libslic3r/PrintConfig.cpp:301
 msgid "Bridging"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:304
+#: src/libslic3r/PrintConfig.cpp:302
 msgid "Bridging angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:306
+#: src/libslic3r/PrintConfig.cpp:304
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:309 src/libslic3r/PrintConfig.cpp:439
-#: src/libslic3r/PrintConfig.cpp:1509 src/libslic3r/PrintConfig.cpp:1522
-#: src/libslic3r/PrintConfig.cpp:3051 src/libslic3r/PrintConfig.cpp:3062
-#: src/libslic3r/PrintConfig.cpp:3175 src/libslic3r/PrintConfig.cpp:3190
-#: src/libslic3r/PrintConfig.cpp:3443 src/libslic3r/PrintConfig.cpp:3655
-#: src/libslic3r/PrintConfig.cpp:4017 src/libslic3r/PrintConfig.cpp:4735
-#: src/libslic3r/PrintConfig.cpp:4858
+#: src/libslic3r/PrintConfig.cpp:307 src/libslic3r/PrintConfig.cpp:436
+#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:1510
+#: src/libslic3r/PrintConfig.cpp:2947 src/libslic3r/PrintConfig.cpp:2958
+#: src/libslic3r/PrintConfig.cpp:3071 src/libslic3r/PrintConfig.cpp:3086
+#: src/libslic3r/PrintConfig.cpp:3336 src/libslic3r/PrintConfig.cpp:3548
+#: src/libslic3r/PrintConfig.cpp:3910 src/libslic3r/PrintConfig.cpp:4628
+#: src/libslic3r/PrintConfig.cpp:4751
 msgid "°"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:315
+#: src/libslic3r/PrintConfig.cpp:313
 msgid "Bridges fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:317
+#: src/libslic3r/PrintConfig.cpp:315
 msgid ""
 "This fan speed is enforced during all bridges and overhangs. It won't slow "
 "down the fan if it's currently running at a higher speed.\n"
@@ -8533,30 +8380,30 @@ msgid ""
 "Can only be overriden by disable_fan_first_layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:321 src/libslic3r/PrintConfig.cpp:334
-#: src/libslic3r/PrintConfig.cpp:343 src/libslic3r/PrintConfig.cpp:357
-#: src/libslic3r/PrintConfig.cpp:370 src/libslic3r/PrintConfig.cpp:833
-#: src/libslic3r/PrintConfig.cpp:844 src/libslic3r/PrintConfig.cpp:857
-#: src/libslic3r/PrintConfig.cpp:870 src/libslic3r/PrintConfig.cpp:887
-#: src/libslic3r/PrintConfig.cpp:1085 src/libslic3r/PrintConfig.cpp:1116
-#: src/libslic3r/PrintConfig.cpp:1206 src/libslic3r/PrintConfig.cpp:1242
-#: src/libslic3r/PrintConfig.cpp:1413 src/libslic3r/PrintConfig.cpp:1534
-#: src/libslic3r/PrintConfig.cpp:1610 src/libslic3r/PrintConfig.cpp:1620
-#: src/libslic3r/PrintConfig.cpp:1663 src/libslic3r/PrintConfig.cpp:1794
-#: src/libslic3r/PrintConfig.cpp:2153 src/libslic3r/PrintConfig.cpp:2401
-#: src/libslic3r/PrintConfig.cpp:2435 src/libslic3r/PrintConfig.cpp:2482
-#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:3032
-#: src/libslic3r/PrintConfig.cpp:3042 src/libslic3r/PrintConfig.cpp:3780
-#: src/libslic3r/PrintConfig.cpp:4412 src/libslic3r/PrintConfig.cpp:4649
-#: src/libslic3r/PrintConfig.cpp:4777
+#: src/libslic3r/PrintConfig.cpp:319 src/libslic3r/PrintConfig.cpp:332
+#: src/libslic3r/PrintConfig.cpp:341 src/libslic3r/PrintConfig.cpp:355
+#: src/libslic3r/PrintConfig.cpp:368 src/libslic3r/PrintConfig.cpp:821
+#: src/libslic3r/PrintConfig.cpp:832 src/libslic3r/PrintConfig.cpp:845
+#: src/libslic3r/PrintConfig.cpp:858 src/libslic3r/PrintConfig.cpp:875
+#: src/libslic3r/PrintConfig.cpp:1073 src/libslic3r/PrintConfig.cpp:1104
+#: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1230
+#: src/libslic3r/PrintConfig.cpp:1401 src/libslic3r/PrintConfig.cpp:1522
+#: src/libslic3r/PrintConfig.cpp:1598 src/libslic3r/PrintConfig.cpp:1608
+#: src/libslic3r/PrintConfig.cpp:1651 src/libslic3r/PrintConfig.cpp:1771
+#: src/libslic3r/PrintConfig.cpp:2052 src/libslic3r/PrintConfig.cpp:2300
+#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2381
+#: src/libslic3r/PrintConfig.cpp:2779 src/libslic3r/PrintConfig.cpp:2928
+#: src/libslic3r/PrintConfig.cpp:2938 src/libslic3r/PrintConfig.cpp:3673
+#: src/libslic3r/PrintConfig.cpp:4305 src/libslic3r/PrintConfig.cpp:4542
+#: src/libslic3r/PrintConfig.cpp:4670
 msgid "%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:328
+#: src/libslic3r/PrintConfig.cpp:326
 msgid "Top fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:330
+#: src/libslic3r/PrintConfig.cpp:328
 msgid ""
 "This fan speed is enforced during all top fills.\n"
 "Set to 1 to disable the fan.\n"
@@ -8564,11 +8411,11 @@ msgid ""
 "Can only be overriden by disable_fan_first_layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:342
+#: src/libslic3r/PrintConfig.cpp:340
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:345
+#: src/libslic3r/PrintConfig.cpp:343
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -8576,15 +8423,15 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:355
+#: src/libslic3r/PrintConfig.cpp:353
 msgid "Above the bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:356
+#: src/libslic3r/PrintConfig.cpp:354
 msgid "Above bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:359
+#: src/libslic3r/PrintConfig.cpp:357
 msgid ""
 "Flow ratio to compensate for the gaps in a bridged top surface. Used for "
 "ironing infillpattern to prevent regions where the low-flow pass does not "
@@ -8593,229 +8440,210 @@ msgid ""
 "120%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:368 src/libslic3r/PrintConfig.cpp:369
+#: src/libslic3r/PrintConfig.cpp:366 src/libslic3r/PrintConfig.cpp:367
 msgid "Bridge overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:372
+#: src/libslic3r/PrintConfig.cpp:370
 msgid ""
 "Amount of overlap between lines of the bridge. If want more space between "
 "line (or less), you can modify it. Default to 100%. A value of 50% will "
 "create two times less lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:379
+#: src/libslic3r/PrintConfig.cpp:377
 msgid "Bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:380
+#: src/libslic3r/PrintConfig.cpp:378
 msgid "Bridge speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:382
+#: src/libslic3r/PrintConfig.cpp:380
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:383 src/libslic3r/PrintConfig.cpp:394
-#: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1215
-#: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1316
-#: src/libslic3r/PrintConfig.cpp:1324 src/libslic3r/PrintConfig.cpp:1351
-#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1806
-#: src/libslic3r/PrintConfig.cpp:2098 src/libslic3r/PrintConfig.cpp:2172
-#: src/libslic3r/PrintConfig.cpp:2305 src/libslic3r/PrintConfig.cpp:2339
-#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2361
-#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2525
-#: src/libslic3r/PrintConfig.cpp:2635 src/libslic3r/PrintConfig.cpp:2765
-#: src/libslic3r/PrintConfig.cpp:2996 src/libslic3r/PrintConfig.cpp:3006
-#: src/libslic3r/PrintConfig.cpp:3634 src/libslic3r/PrintConfig.cpp:3758
-#: src/libslic3r/PrintConfig.cpp:3859 src/libslic3r/PrintConfig.cpp:4327
+#: src/libslic3r/PrintConfig.cpp:381 src/libslic3r/PrintConfig.cpp:392
+#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1203
+#: src/libslic3r/PrintConfig.cpp:1295 src/libslic3r/PrintConfig.cpp:1304
+#: src/libslic3r/PrintConfig.cpp:1312 src/libslic3r/PrintConfig.cpp:1339
+#: src/libslic3r/PrintConfig.cpp:1358 src/libslic3r/PrintConfig.cpp:1783
+#: src/libslic3r/PrintConfig.cpp:1997 src/libslic3r/PrintConfig.cpp:2071
+#: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2238
+#: src/libslic3r/PrintConfig.cpp:2250 src/libslic3r/PrintConfig.cpp:2260
+#: src/libslic3r/PrintConfig.cpp:2325 src/libslic3r/PrintConfig.cpp:2424
+#: src/libslic3r/PrintConfig.cpp:2534 src/libslic3r/PrintConfig.cpp:2665
+#: src/libslic3r/PrintConfig.cpp:2892 src/libslic3r/PrintConfig.cpp:2902
+#: src/libslic3r/PrintConfig.cpp:3527 src/libslic3r/PrintConfig.cpp:3651
+#: src/libslic3r/PrintConfig.cpp:3752 src/libslic3r/PrintConfig.cpp:4220
 msgid "mm/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:390
+#: src/libslic3r/PrintConfig.cpp:388
 msgid "Internal bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:391
+#: src/libslic3r/PrintConfig.cpp:389
 msgid "Internal bridge speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:393
+#: src/libslic3r/PrintConfig.cpp:391
 #, possible-c-format
 msgid ""
 "Speed for printing the bridges that support the top layer.\n"
 "Can be a % of the bridge speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:402
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:400
 msgid "Brim inside holes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:404
+#: src/libslic3r/PrintConfig.cpp:402
 msgid ""
 "Allow to create a brim over an island when it's inside a hole (or surrounded "
 "by an object)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:409
+#: src/libslic3r/PrintConfig.cpp:407
 msgid "Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:411
+#: src/libslic3r/PrintConfig.cpp:409
 msgid ""
 "Horizontal width of the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:418
+#: src/libslic3r/PrintConfig.cpp:416
 msgid "Interior Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:420
+#: src/libslic3r/PrintConfig.cpp:418
 msgid ""
 "Horizontal width of the brim that will be printed inside each object on the "
 "first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:428
+#: src/libslic3r/PrintConfig.cpp:426
 msgid "Brim ears"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:430
+#: src/libslic3r/PrintConfig.cpp:428
 msgid "Only draw brim over the sharp edges of the model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:435
+#: src/libslic3r/PrintConfig.cpp:433
 msgid "Max angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:436
-msgid "Brim ear max angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:438
+#: src/libslic3r/PrintConfig.cpp:435
 msgid ""
 "Maximum angle to let a brim ear appear. \n"
 "If set to 0, no brim will be created. \n"
 "If set to ~178, brim will be created on everything but strait sections."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:446
-msgid "Detection radius"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:447
-msgid "Brim ear detection length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:449
-msgid ""
-"The geometry will be decimated before dectecting sharp angles. This "
-"parameter indicate the minimum length of strait sections after decimation.\n"
-"0 to deactivate"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:457 src/libslic3r/PrintConfig.cpp:1566
-#: src/libslic3r/PrintConfig.cpp:3583 src/libslic3r/PrintConfig.cpp:3598
+#: src/libslic3r/PrintConfig.cpp:443 src/libslic3r/PrintConfig.cpp:1554
+#: src/libslic3r/PrintConfig.cpp:3476 src/libslic3r/PrintConfig.cpp:3491
 msgid "Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:458
+#: src/libslic3r/PrintConfig.cpp:444
 msgid "Ear pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:460
+#: src/libslic3r/PrintConfig.cpp:446
 msgid ""
 "Pattern for the ear. The concentric id the default one. The rectilinear has "
 "a perimeter around it, you can try it if the concentric has too many "
 "problems to stick to the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:465 src/libslic3r/PrintConfig.cpp:716
-#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:772
-#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:3612
+#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:703
+#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:760
+#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:3505
 msgid "Concentric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:466 src/libslic3r/PrintConfig.cpp:713
-#: src/libslic3r/PrintConfig.cpp:741 src/libslic3r/PrintConfig.cpp:769
-#: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:3591
-#: src/libslic3r/PrintConfig.cpp:3610
+#: src/libslic3r/PrintConfig.cpp:452 src/libslic3r/PrintConfig.cpp:699
+#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:757
+#: src/libslic3r/PrintConfig.cpp:1576 src/libslic3r/PrintConfig.cpp:3484
+#: src/libslic3r/PrintConfig.cpp:3503
 msgid "Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:471
+#: src/libslic3r/PrintConfig.cpp:456
 msgid "Brim offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:473
+#: src/libslic3r/PrintConfig.cpp:458
 msgid ""
 "Distance between the brim and the part. Should be kept at 0 unless you "
 "encounter great difficulties to separate them. It's subtracted to brim_width "
 "and brim_width_interior., so it has to be lower than them"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:480
+#: src/libslic3r/PrintConfig.cpp:465
 msgid "Chamber"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:481
+#: src/libslic3r/PrintConfig.cpp:466
 msgid "Chamber temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:483
+#: src/libslic3r/PrintConfig.cpp:468
 msgid ""
 "Chamber temperature0. Note that this setting doesn't do anything, but you "
 "can access it in Start G-code, Tool change G-code and the other ones, like "
 "for other temperature settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:491
+#: src/libslic3r/PrintConfig.cpp:476
 msgid "Clip multi-part objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:493
+#: src/libslic3r/PrintConfig.cpp:478
 msgid ""
 "When printing multi-material objects, this settings will make Slic3r to clip "
 "the overlapping object parts one by the other (2nd part will be clipped by "
 "the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:500
+#: src/libslic3r/PrintConfig.cpp:485
 msgid "Colorprint height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:502
+#: src/libslic3r/PrintConfig.cpp:487
 msgid "Heights at which a filament change is to occur. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:512
+#: src/libslic3r/PrintConfig.cpp:497
 msgid "Compatible printers condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:513
+#: src/libslic3r/PrintConfig.cpp:498
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:527
+#: src/libslic3r/PrintConfig.cpp:512
 msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:528
+#: src/libslic3r/PrintConfig.cpp:513
 msgid ""
 "A boolean expression using the configuration values of an active print "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active print profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:545
+#: src/libslic3r/PrintConfig.cpp:530
 msgid "Complete individual objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:547
+#: src/libslic3r/PrintConfig.cpp:532
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -8823,22 +8651,22 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:555
+#: src/libslic3r/PrintConfig.cpp:540
 msgid "Allow only one skirt loop"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:557
+#: src/libslic3r/PrintConfig.cpp:542
 msgid ""
 "When using 'Complete individual objects', the default behavior is to draw "
 "the skirt around each object. if you prefer to have only one skirt for the "
 "whole plater, use this option."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:563
+#: src/libslic3r/PrintConfig.cpp:548
 msgid "Object sort"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:565
+#: src/libslic3r/PrintConfig.cpp:550
 msgid ""
 "When printing multiple objects or copies on after another, this will help "
 "you to choose how it's ordered.\n"
@@ -8848,49 +8676,49 @@ msgid ""
 "Lowest Z will sort them by their height, useful for delta printers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:574
+#: src/libslic3r/PrintConfig.cpp:559
 msgid "Right panel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:575
+#: src/libslic3r/PrintConfig.cpp:560
 msgid "lowest Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:576
+#: src/libslic3r/PrintConfig.cpp:561
 msgid "lowest Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:581
+#: src/libslic3r/PrintConfig.cpp:566
 msgid "Enable auto cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:583
+#: src/libslic3r/PrintConfig.cpp:568
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:589
+#: src/libslic3r/PrintConfig.cpp:574
 msgid "Cooling tube position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:591
+#: src/libslic3r/PrintConfig.cpp:576
 msgid "Distance of the center-point of the cooling tube from the extruder tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:598
+#: src/libslic3r/PrintConfig.cpp:583
 msgid "Cooling tube length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:600
+#: src/libslic3r/PrintConfig.cpp:585
 msgid "Length of the cooling tube to limit space for cooling moves inside it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:609
+#: src/libslic3r/PrintConfig.cpp:594
 msgid "Default acceleration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:610
+#: src/libslic3r/PrintConfig.cpp:595
 #, possible-c-format
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
@@ -8899,72 +8727,72 @@ msgid ""
 "Set zero to prevent resetting acceleration at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:620
+#: src/libslic3r/PrintConfig.cpp:605
 msgid "Default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:621
+#: src/libslic3r/PrintConfig.cpp:606
 msgid ""
 "Default filament profile associated with the current printer profile. On "
 "selection of the current printer profile, this filament profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:627
+#: src/libslic3r/PrintConfig.cpp:612
 msgid "Default print profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:628 src/libslic3r/PrintConfig.cpp:4579
-#: src/libslic3r/PrintConfig.cpp:4590
+#: src/libslic3r/PrintConfig.cpp:613 src/libslic3r/PrintConfig.cpp:4472
+#: src/libslic3r/PrintConfig.cpp:4483
 msgid ""
 "Default print profile associated with the current printer profile. On "
 "selection of the current printer profile, this print profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:634
+#: src/libslic3r/PrintConfig.cpp:619
 msgid "Disable fan for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:636
+#: src/libslic3r/PrintConfig.cpp:621
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:645
+#: src/libslic3r/PrintConfig.cpp:630
 msgid "Don't support bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:647
+#: src/libslic3r/PrintConfig.cpp:632
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:653
+#: src/libslic3r/PrintConfig.cpp:638
 msgid "Distance between objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:655
+#: src/libslic3r/PrintConfig.cpp:640
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:662 src/libslic3r/PrintConfig.cpp:673
+#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:658
 msgid "End G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:664
+#: src/libslic3r/PrintConfig.cpp:649
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all Slic3r settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:674
+#: src/libslic3r/PrintConfig.cpp:659
 msgid "Filament end G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:676
+#: src/libslic3r/PrintConfig.cpp:661
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode (and before any toolchange from this filament in case of "
@@ -8973,76 +8801,80 @@ msgid ""
 "extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:687
+#: src/libslic3r/PrintConfig.cpp:672
 msgid "Ensure vertical shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:689
+#: src/libslic3r/PrintConfig.cpp:674
 msgid ""
 "Add solid infill near sloping surfaces to guarantee the vertical shell "
 "thickness (top+bottom solid layers)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:696
+#: src/libslic3r/PrintConfig.cpp:681
 msgid "Top Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:698
+#: src/libslic3r/PrintConfig.cpp:683
 msgid ""
 "Fill pattern for top infill. This only affects the top visible layer, and "
 "not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:714 src/libslic3r/PrintConfig.cpp:742
+#: src/libslic3r/PrintConfig.cpp:700 src/libslic3r/PrintConfig.cpp:730
 msgid "Monotonic (filled)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:715 src/libslic3r/PrintConfig.cpp:743
-#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:1589
-#: src/libslic3r/PrintConfig.cpp:3611
+#: src/libslic3r/PrintConfig.cpp:701 src/libslic3r/PrintConfig.cpp:731
+#: src/libslic3r/PrintConfig.cpp:759 src/libslic3r/PrintConfig.cpp:1577
+#: src/libslic3r/PrintConfig.cpp:3504
 msgid "Monotonic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:745
-#: src/libslic3r/PrintConfig.cpp:773 src/libslic3r/PrintConfig.cpp:3613
+#: src/libslic3r/PrintConfig.cpp:702
+msgid "Aligned Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:733
+#: src/libslic3r/PrintConfig.cpp:761 src/libslic3r/PrintConfig.cpp:3506
 msgid "Concentric (filled)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:718 src/libslic3r/PrintConfig.cpp:746
-#: src/libslic3r/PrintConfig.cpp:774 src/libslic3r/PrintConfig.cpp:1599
-#: src/libslic3r/PrintConfig.cpp:3614
+#: src/libslic3r/PrintConfig.cpp:705 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1587
+#: src/libslic3r/PrintConfig.cpp:3507
 msgid "Hilbert Curve"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:719 src/libslic3r/PrintConfig.cpp:747
-#: src/libslic3r/PrintConfig.cpp:775 src/libslic3r/PrintConfig.cpp:1600
+#: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:735
+#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1588
 msgid "Archimedean Chords"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:720 src/libslic3r/PrintConfig.cpp:748
-#: src/libslic3r/PrintConfig.cpp:776 src/libslic3r/PrintConfig.cpp:1601
+#: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:736
+#: src/libslic3r/PrintConfig.cpp:764 src/libslic3r/PrintConfig.cpp:1589
 msgid "Octagram Spiral"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:721 src/libslic3r/PrintConfig.cpp:3615
+#: src/libslic3r/PrintConfig.cpp:708 src/libslic3r/PrintConfig.cpp:3508
 msgid "Sawtooth"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:727
+#: src/libslic3r/PrintConfig.cpp:714
 msgid "Bottom fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:729
+#: src/libslic3r/PrintConfig.cpp:716
 msgid ""
 "Fill pattern for bottom infill. This only affects the bottom visible layer, "
 "and not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:754
+#: src/libslic3r/PrintConfig.cpp:742
 msgid "Solid pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:756
+#: src/libslic3r/PrintConfig.cpp:744
 msgid ""
 "Fill pattern for solid (internal) infill. This only affects the solid not-"
 "visible layers. You should use rectilinear is most cases. You can try "
@@ -9050,16 +8882,16 @@ msgid ""
 "patterns by a single big line & is more efficient for filling little spaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:770
+#: src/libslic3r/PrintConfig.cpp:758
 msgid "Rectilinear (filled)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:781
+#: src/libslic3r/PrintConfig.cpp:769
 #, possible-c-format
 msgid "Enforce 100% fill volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:783
+#: src/libslic3r/PrintConfig.cpp:771
 msgid ""
 "Experimental option which modifies (in solid infill) fill flow to have the "
 "exact amount of plastic inside the volume to fill (it generally changes the "
@@ -9069,11 +8901,11 @@ msgid ""
 "remove the over-extrusion seen in thin infill areas, from the overlap ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:792
+#: src/libslic3r/PrintConfig.cpp:780
 msgid "Default infill margin"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:794
+#: src/libslic3r/PrintConfig.cpp:782
 #, possible-c-format
 msgid ""
 "This parameter grows the top/bottom/solid layers by the specified MM to "
@@ -9081,20 +8913,20 @@ msgid ""
 "of the perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:795 src/libslic3r/PrintConfig.cpp:806
-#: src/libslic3r/PrintConfig.cpp:1650
+#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:794
+#: src/libslic3r/PrintConfig.cpp:1638
 msgid "mm/%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:802
+#: src/libslic3r/PrintConfig.cpp:790
 msgid "Bridged"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:803
+#: src/libslic3r/PrintConfig.cpp:791
 msgid "Bridge margin"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:805
+#: src/libslic3r/PrintConfig.cpp:793
 #, possible-c-format
 msgid ""
 "This parameter grows the bridged solid infill layers by the specified MM to "
@@ -9102,15 +8934,15 @@ msgid ""
 "of the external perimeter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:813
+#: src/libslic3r/PrintConfig.cpp:801
 msgid "External perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:814
+#: src/libslic3r/PrintConfig.cpp:802
 msgid "External perimeters width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:816
+#: src/libslic3r/PrintConfig.cpp:804
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -9118,27 +8950,27 @@ msgid ""
 "(for example 112.5%), it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1128
-#: src/libslic3r/PrintConfig.cpp:1698 src/libslic3r/PrintConfig.cpp:1711
-#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:2060
-#: src/libslic3r/PrintConfig.cpp:2088 src/libslic3r/PrintConfig.cpp:2515
-#: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:3148
-#: src/libslic3r/PrintConfig.cpp:3162 src/libslic3r/PrintConfig.cpp:3259
-#: src/libslic3r/PrintConfig.cpp:3431 src/libslic3r/PrintConfig.cpp:3530
-#: src/libslic3r/PrintConfig.cpp:3811 src/libslic3r/PrintConfig.cpp:4309
-#: src/libslic3r/PrintConfig.cpp:4318
+#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:1116
+#: src/libslic3r/PrintConfig.cpp:1686 src/libslic3r/PrintConfig.cpp:1699
+#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1959
+#: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2654 src/libslic3r/PrintConfig.cpp:3044
+#: src/libslic3r/PrintConfig.cpp:3058 src/libslic3r/PrintConfig.cpp:3155
+#: src/libslic3r/PrintConfig.cpp:3324 src/libslic3r/PrintConfig.cpp:3423
+#: src/libslic3r/PrintConfig.cpp:3704 src/libslic3r/PrintConfig.cpp:4202
+#: src/libslic3r/PrintConfig.cpp:4211
 msgid "mm or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:826
+#: src/libslic3r/PrintConfig.cpp:814
 msgid "Cutting corners"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:827
+#: src/libslic3r/PrintConfig.cpp:815
 msgid "Ext. peri. cut corners"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:829
+#: src/libslic3r/PrintConfig.cpp:817
 #, possible-c-format
 msgid ""
 "Activate this option to modify the flow to acknoledge that the nozzle is "
@@ -9150,13 +8982,15 @@ msgid ""
 "nozzle and a very precise printer.\n"
 "It's very experimental, please report about the usefulness. It may be "
 "removed if there is no use of it."
-msgstr ""
+msgstr "Activate this option to modify the flow to acknoledge that the nozzle is round and the corners will have a round shape, and so change the flow to realized that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\n"
+"Note: At 100% this change the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer.\n"
+"זה מאוד ניסיוני, אנא דווח על התועלת. ניתן להסיר אותו אם אין בו שימוש."
 
-#: src/libslic3r/PrintConfig.cpp:838
+#: src/libslic3r/PrintConfig.cpp:826
 msgid "External perimeter fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:839
+#: src/libslic3r/PrintConfig.cpp:827
 msgid ""
 "When set to a non-zero value this fan speed is used only for external "
 "perimeters (visible ones). \n"
@@ -9167,15 +9001,15 @@ msgid ""
 "improve layer adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:851
+#: src/libslic3r/PrintConfig.cpp:839
 msgid "external perimeter overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:852
+#: src/libslic3r/PrintConfig.cpp:840
 msgid "Ext. peri. overlap"
-msgstr ""
+msgstr "Ext. peri. חפיפה"
 
-#: src/libslic3r/PrintConfig.cpp:854
+#: src/libslic3r/PrintConfig.cpp:842
 #, possible-c-format
 msgid ""
 "This setting allow you to reduce the overlap between the perimeters and the "
@@ -9184,17 +9018,18 @@ msgid ""
 "contributing to the overlap with the 'inner' one.\n"
 "It's very experimental, please report about the usefulness. It may be "
 "removed if there is no use of it."
-msgstr ""
+msgstr "This setting allow you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one.\n"
+"זה מאוד ניסיוני, אנא דווח על התועלת. ניתן להסיר אותו אם אין בו שימוש."
 
-#: src/libslic3r/PrintConfig.cpp:864
+#: src/libslic3r/PrintConfig.cpp:852
 msgid "perimeter overlap"
-msgstr ""
+msgstr "חפיפת היקף"
 
-#: src/libslic3r/PrintConfig.cpp:865
+#: src/libslic3r/PrintConfig.cpp:853
 msgid "Perimeter overlap"
-msgstr ""
+msgstr "חפיפה היקפית"
 
-#: src/libslic3r/PrintConfig.cpp:867
+#: src/libslic3r/PrintConfig.cpp:855
 #, possible-c-format
 msgid ""
 "This setting allow you to reduce the overlap between the perimeters, to "
@@ -9202,17 +9037,18 @@ msgid ""
 "left, and 0% means that perimeters are not touching each other anymore.\n"
 "It's very experimental, please report about the usefulness. It may be "
 "removed if there is no use for it."
-msgstr ""
+msgstr "This setting allow you to reduce the overlap between the perimeters, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that perimeters are not touching each other anymore.\n"
+"זה מאוד ניסיוני, אנא דווח על התועלת. ניתן להסיר אותו אם אין בו שימוש."
 
-#: src/libslic3r/PrintConfig.cpp:877
+#: src/libslic3r/PrintConfig.cpp:865
 msgid "Better bonding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:878
+#: src/libslic3r/PrintConfig.cpp:866
 msgid "Perimeter bonding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:880
+#: src/libslic3r/PrintConfig.cpp:868
 msgid ""
 "This setting may degrad a bit the quality of your external perimeter, in "
 "exchange for a better bonding between perimeters.Use it if you have great "
@@ -9226,53 +9062,55 @@ msgid ""
 "external ones).\n"
 "It's very experimental, please report about the usefulness. It may be "
 "removed if there is no use for it."
-msgstr ""
+msgstr "This setting may degrad a bit the quality of your external perimeter, in exchange for a better bonding between perimeters.Use it if you have great difficulties with perimeter bonding, for example with high temperature filaments.\n"
+"This percentage is the % of overlap between perimeters, a bit like perimeter_overlap and external_perimeter_overlap, but in reverse. You have to set perimeter_overlap and external_perimeter_overlap to 100%, or this setting has no effect. 0: no effect, 50%: half of the nozzle will be over an already extruded perimeter while extruding a new one, unless it's an external ones).\n"
+"זה מאוד ניסיוני, אנא דווח על התועלת. ניתן להסיר אותו אם אין בו שימוש."
 
-#: src/libslic3r/PrintConfig.cpp:894
+#: src/libslic3r/PrintConfig.cpp:882
 msgid "External"
-msgstr ""
+msgstr "חיצוני"
 
-#: src/libslic3r/PrintConfig.cpp:895
+#: src/libslic3r/PrintConfig.cpp:883
 msgid "External perimeters speed"
-msgstr ""
+msgstr "מהירות היקף חיצוני"
 
-#: src/libslic3r/PrintConfig.cpp:897
+#: src/libslic3r/PrintConfig.cpp:885
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
+msgstr "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:1726
-#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:3136
-#: src/libslic3r/PrintConfig.cpp:3272 src/libslic3r/PrintConfig.cpp:3576
-#: src/libslic3r/PrintConfig.cpp:3826
+#: src/libslic3r/PrintConfig.cpp:888 src/libslic3r/PrintConfig.cpp:1714
+#: src/libslic3r/PrintConfig.cpp:1728 src/libslic3r/PrintConfig.cpp:3032
+#: src/libslic3r/PrintConfig.cpp:3168 src/libslic3r/PrintConfig.cpp:3469
+#: src/libslic3r/PrintConfig.cpp:3719
 msgid "mm/s or %"
-msgstr ""
+msgstr "מ\"מ\\ש או %"
 
-#: src/libslic3r/PrintConfig.cpp:907
+#: src/libslic3r/PrintConfig.cpp:895
 msgid "first"
-msgstr ""
+msgstr "ראשון"
 
-#: src/libslic3r/PrintConfig.cpp:908
+#: src/libslic3r/PrintConfig.cpp:896
 msgid "External perimeters first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:910
+#: src/libslic3r/PrintConfig.cpp:898
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:916
+#: src/libslic3r/PrintConfig.cpp:904
 msgid "In vase mode (no seam)"
-msgstr ""
+msgstr "במצב אגרטל (ללא תפר)"
 
-#: src/libslic3r/PrintConfig.cpp:917
+#: src/libslic3r/PrintConfig.cpp:905
 msgid "ExternalPerimeter in vase mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:919
+#: src/libslic3r/PrintConfig.cpp:907
 msgid ""
 "Print contour perimeters in two circle, in a contiunous way, like for a vase "
 "mode. It needs the external_perimeters_first parameter do work. \n"
@@ -9284,70 +9122,70 @@ msgid ""
 "to do two loops."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:928
+#: src/libslic3r/PrintConfig.cpp:916
 msgid "Only for outer side"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:929
+#: src/libslic3r/PrintConfig.cpp:917
 msgid "Ext peri first for outer side"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:931
+#: src/libslic3r/PrintConfig.cpp:919
 msgid ""
 "Only do the vase trick on the external side. Useful when the thikness is too "
 "low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:936
+#: src/libslic3r/PrintConfig.cpp:924
 msgid "Only for inner side"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:937
+#: src/libslic3r/PrintConfig.cpp:925
 msgid "ext peri first for inner side"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:939
+#: src/libslic3r/PrintConfig.cpp:927
 msgid ""
 "Only do the vase trick on the external side. Useful when you only want to "
 "remode seam from screw hole."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:948
+#: src/libslic3r/PrintConfig.cpp:936
 msgid "Perimeters loop"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:950
+#: src/libslic3r/PrintConfig.cpp:938
 msgid ""
 "Join the perimeters to create only one continuous extrusion without any z-"
 "hop. Long inside travel (from external to holes) are not extruded to give "
 "some space to the infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:956 src/libslic3r/PrintConfig.cpp:3011
+#: src/libslic3r/PrintConfig.cpp:944 src/libslic3r/PrintConfig.cpp:2907
 msgid "Seam position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:957
+#: src/libslic3r/PrintConfig.cpp:945
 msgid "Perimeter loop seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:959
+#: src/libslic3r/PrintConfig.cpp:947
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:963
+#: src/libslic3r/PrintConfig.cpp:951
 msgid "Nearest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:969
+#: src/libslic3r/PrintConfig.cpp:957
 msgid "filling horizontal gaps on slopes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:970
+#: src/libslic3r/PrintConfig.cpp:958
 msgid "Extra perimeters (do nothing)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:972
+#: src/libslic3r/PrintConfig.cpp:960
 #, possible-c-format
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
@@ -9357,15 +9195,15 @@ msgid ""
 "a message. Personally, i think it's useless."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:981
+#: src/libslic3r/PrintConfig.cpp:969
 msgid "On overhangs"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:982
+#: src/libslic3r/PrintConfig.cpp:970
 msgid "Extra perimeters over overhangs"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:984
+#: src/libslic3r/PrintConfig.cpp:972
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
 "keeps adding perimeter until all overhangs are filled.\n"
@@ -9373,43 +9211,43 @@ msgid ""
 "If you use this setting, consider strongly using also overhangs_reverse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:992
+#: src/libslic3r/PrintConfig.cpp:980
 msgid "On odd layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:993
+#: src/libslic3r/PrintConfig.cpp:981
 msgid "Extra perimeter on odd layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:995
+#: src/libslic3r/PrintConfig.cpp:983
 msgid ""
 "Add one perimeter every odd layer. With this, infill is taken into sandwitch "
 "and you may be able to reduce drastically the infill/perimeter overlap "
 "setting. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1001
+#: src/libslic3r/PrintConfig.cpp:989
 msgid "Only one perimeter on Top surfaces"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1003
+#: src/libslic3r/PrintConfig.cpp:991
 msgid ""
 "Use only one perimeter on flat top surface, to let more space to the top "
 "infill pattern."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1011
+#: src/libslic3r/PrintConfig.cpp:999
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1027
+#: src/libslic3r/PrintConfig.cpp:1015
 msgid "Extruder clearance height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1029
+#: src/libslic3r/PrintConfig.cpp:1017
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -9417,30 +9255,30 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1041
+#: src/libslic3r/PrintConfig.cpp:1029
 msgid "Extruder clearance radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1042
+#: src/libslic3r/PrintConfig.cpp:1030
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1052
+#: src/libslic3r/PrintConfig.cpp:1040
 msgid "Extruder Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1054 src/libslic3r/PrintConfig.cpp:1158
+#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1146
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1061
+#: src/libslic3r/PrintConfig.cpp:1049
 msgid "Extruder offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1063 src/libslic3r/PrintConfig.cpp:4252
+#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:4145
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -9448,11 +9286,11 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1072
+#: src/libslic3r/PrintConfig.cpp:1060
 msgid "Extruder temp offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1074
+#: src/libslic3r/PrintConfig.cpp:1062
 msgid ""
 "This offset will be added to all extruder temperature set by the filament "
 "settings.\n"
@@ -9461,31 +9299,31 @@ msgid ""
 "instead of 'M104 S[first_layer_temperature]' in the start_gcode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1082
+#: src/libslic3r/PrintConfig.cpp:1070
 msgid "Extruder fan offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1084
+#: src/libslic3r/PrintConfig.cpp:1072
 msgid ""
 "This offset wil be add to all fan value set by the filament properties. It "
 "won't make them go higher than 100% and lower than 0%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1091
+#: src/libslic3r/PrintConfig.cpp:1079
 msgid "Extrusion axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1093
+#: src/libslic3r/PrintConfig.cpp:1081
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1108
+#: src/libslic3r/PrintConfig.cpp:1086 src/libslic3r/PrintConfig.cpp:1096
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1100
+#: src/libslic3r/PrintConfig.cpp:1088
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -9493,7 +9331,7 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1110
+#: src/libslic3r/PrintConfig.cpp:1098
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -9503,11 +9341,11 @@ msgid ""
 "only purpose is to offer the same functionality but with a per-object basis."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1122
+#: src/libslic3r/PrintConfig.cpp:1110
 msgid "Default extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1124
+#: src/libslic3r/PrintConfig.cpp:1112
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -9516,21 +9354,21 @@ msgid ""
 "diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1135
+#: src/libslic3r/PrintConfig.cpp:1123
 msgid "Keep fan always on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1137
+#: src/libslic3r/PrintConfig.cpp:1125
 msgid ""
 "If this is enabled, fan will continuously run at base speed if no setting "
 "override the speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1143
+#: src/libslic3r/PrintConfig.cpp:1131
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1133
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the default and "
@@ -9538,49 +9376,49 @@ msgid ""
 "Set to 0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:3123
+#: src/libslic3r/PrintConfig.cpp:1136 src/libslic3r/PrintConfig.cpp:3019
 msgid "approximate seconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1156
+#: src/libslic3r/PrintConfig.cpp:1144
 msgid "Filament color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1164
+#: src/libslic3r/PrintConfig.cpp:1152
 msgid "Filament notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1166
+#: src/libslic3r/PrintConfig.cpp:1154
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1174
+#: src/libslic3r/PrintConfig.cpp:1162
 msgid "Max speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1176
+#: src/libslic3r/PrintConfig.cpp:1164
 msgid ""
 "Maximum speed allowed for this filament. Limits the maximum speed of a print "
 "to the minimum of the print speed and the filament speed. Set to zero for no "
 "limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:2442
+#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:2341
 msgid "Max volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1187
+#: src/libslic3r/PrintConfig.cpp:1175
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1196
+#: src/libslic3r/PrintConfig.cpp:1184
 msgid "Max speed on the wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1197
+#: src/libslic3r/PrintConfig.cpp:1185
 msgid ""
 "This setting is used to set the maximum speed when extruding inside the wipe "
 "tower (use M220). In %, set 0 to disable and use the Filament type instead.\n"
@@ -9595,117 +9433,117 @@ msgid ""
 "tower print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1213
+#: src/libslic3r/PrintConfig.cpp:1201
 msgid "Loading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1214
+#: src/libslic3r/PrintConfig.cpp:1202
 msgid "Speed used for loading the filament on the wipe tower. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1222
+#: src/libslic3r/PrintConfig.cpp:1210
 msgid "Toolchange temperature enabled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1223
+#: src/libslic3r/PrintConfig.cpp:1211
 msgid "Determines whether toolchange temperatures will be applied"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1228
+#: src/libslic3r/PrintConfig.cpp:1216
 msgid "Fast mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1229
+#: src/libslic3r/PrintConfig.cpp:1217
 msgid ""
 "Experimental: drops nozzle temperature during cooling moves instead of prior "
 "to extraction to reduce wait time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1234
+#: src/libslic3r/PrintConfig.cpp:1222
 msgid "Use part fan to cool hotend"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1235
+#: src/libslic3r/PrintConfig.cpp:1223
 msgid ""
 "Experimental setting.  May enable the hotend to cool down faster during "
 "toolchanges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1240
+#: src/libslic3r/PrintConfig.cpp:1228
 msgid "Toolchange part fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1241
+#: src/libslic3r/PrintConfig.cpp:1229
 msgid ""
 "Experimental setting.  Fan speeds that are too high can clash with the "
 "hotend's PID routine."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1249
+#: src/libslic3r/PrintConfig.cpp:1237
 msgid "Enable Skinnydip string reduction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1250
+#: src/libslic3r/PrintConfig.cpp:1238
 msgid ""
 "Skinnydip performs a secondary dip into the meltzone to burn off fine "
 "strings of filament"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1255
+#: src/libslic3r/PrintConfig.cpp:1243
 msgid "Pause in melt zone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1256
+#: src/libslic3r/PrintConfig.cpp:1244
 msgid ""
 "Stay in melt zone for this amount of time before extracting the filament.  "
 "Not usually necessary."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1257 src/libslic3r/PrintConfig.cpp:1265
+#: src/libslic3r/PrintConfig.cpp:1245 src/libslic3r/PrintConfig.cpp:1253
 msgid "milliseconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1263
+#: src/libslic3r/PrintConfig.cpp:1251
 msgid "Pause before extraction "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1264
+#: src/libslic3r/PrintConfig.cpp:1252
 msgid ""
 "Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily "
 "needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1271
+#: src/libslic3r/PrintConfig.cpp:1259
 msgid "Speed to move into melt zone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1272 src/libslic3r/PrintConfig.cpp:1280
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1268
 msgid "usually not necessary to change this"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1273 src/libslic3r/PrintConfig.cpp:1281
+#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:1269
 msgid "mm/sec"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1279
+#: src/libslic3r/PrintConfig.cpp:1267
 msgid "Speed to extract from melt zone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1287
+#: src/libslic3r/PrintConfig.cpp:1275
 msgid "Toolchange temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1288
+#: src/libslic3r/PrintConfig.cpp:1276
 msgid ""
 "To further reduce stringing, it can be helpful to set a lower temperature "
 "just prior to extracting filament from the hotend."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1296
+#: src/libslic3r/PrintConfig.cpp:1284
 msgid "Insertion distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1297
+#: src/libslic3r/PrintConfig.cpp:1285
 msgid ""
 "For stock extruders, usually 40-42mm.  For bondtech extruder upgrade, "
 "usually 30-32mm.  Start with a low value and gradually increase it until "
@@ -9713,67 +9551,67 @@ msgid ""
 "high."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1305
+#: src/libslic3r/PrintConfig.cpp:1293
 msgid "Loading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1306
+#: src/libslic3r/PrintConfig.cpp:1294
 msgid "Speed used at the very beginning of loading phase. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1313
+#: src/libslic3r/PrintConfig.cpp:1301
 msgid "Unloading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1314
+#: src/libslic3r/PrintConfig.cpp:1302
 msgid ""
 "Speed used for unloading the filament on the wipe tower (does not affect  "
 "initial part of unloading just after ramming). "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1322
+#: src/libslic3r/PrintConfig.cpp:1310
 msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1323
+#: src/libslic3r/PrintConfig.cpp:1311
 msgid ""
 "Speed used for unloading the tip of the filament immediately after ramming. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1330
+#: src/libslic3r/PrintConfig.cpp:1318
 msgid "Delay after unloading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1331
+#: src/libslic3r/PrintConfig.cpp:1319
 msgid ""
 "Time to wait after the filament is unloaded. May help to get reliable "
 "toolchanges with flexible materials that may need more time to shrink to "
 "original dimensions. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1340
+#: src/libslic3r/PrintConfig.cpp:1328
 msgid "Number of cooling moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1341
+#: src/libslic3r/PrintConfig.cpp:1329
 msgid ""
 "Filament is cooled by being moved back and forth in the cooling tubes. "
 "Specify desired number of these moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1349
+#: src/libslic3r/PrintConfig.cpp:1337
 msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1350
+#: src/libslic3r/PrintConfig.cpp:1338
 msgid "Cooling moves are gradually accelerating beginning at this speed. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1357
+#: src/libslic3r/PrintConfig.cpp:1345
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1358
+#: src/libslic3r/PrintConfig.cpp:1346
 msgid ""
 "After a tool change, the exact position of the newly loaded filament inside "
 "the nozzle may not be known, and the filament pressure is likely not yet "
@@ -9782,62 +9620,62 @@ msgid ""
 "to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1362
+#: src/libslic3r/PrintConfig.cpp:1350
 msgid "mm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1368
+#: src/libslic3r/PrintConfig.cpp:1356
 msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1369
+#: src/libslic3r/PrintConfig.cpp:1357
 msgid "Cooling moves are gradually accelerating towards this speed. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1376
+#: src/libslic3r/PrintConfig.cpp:1364
 msgid "Filament load time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1377
+#: src/libslic3r/PrintConfig.cpp:1365
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1384
+#: src/libslic3r/PrintConfig.cpp:1372
 msgid "Ramming parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1385
+#: src/libslic3r/PrintConfig.cpp:1373
 msgid ""
 "This string is edited by RammingDialog and contains ramming specific "
 "parameters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1391
+#: src/libslic3r/PrintConfig.cpp:1379
 msgid "Filament unload time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1392
+#: src/libslic3r/PrintConfig.cpp:1380
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1400
+#: src/libslic3r/PrintConfig.cpp:1388
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1396
 msgid "Shrinkage"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1409
+#: src/libslic3r/PrintConfig.cpp:1397
 #, possible-c-format
 msgid ""
 "Enter the shrinkage percentage that the filament will get after cooling (94% "
@@ -9847,12 +9685,12 @@ msgid ""
 "after the checks."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1419 src/libslic3r/PrintConfig.cpp:4490
-#: src/libslic3r/PrintConfig.cpp:4491
+#: src/libslic3r/PrintConfig.cpp:1407 src/libslic3r/PrintConfig.cpp:4383
+#: src/libslic3r/PrintConfig.cpp:4384
 msgid "Density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1421
+#: src/libslic3r/PrintConfig.cpp:1409
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -9860,45 +9698,45 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1424
+#: src/libslic3r/PrintConfig.cpp:1412
 msgid "g/cm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1430
+#: src/libslic3r/PrintConfig.cpp:1418
 msgid "Filament type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1432
+#: src/libslic3r/PrintConfig.cpp:1420
 msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1468
+#: src/libslic3r/PrintConfig.cpp:1456
 msgid "Soluble material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1470
+#: src/libslic3r/PrintConfig.cpp:1458
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1476
+#: src/libslic3r/PrintConfig.cpp:1464
 msgid "Filament cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1478
+#: src/libslic3r/PrintConfig.cpp:1466
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1479
+#: src/libslic3r/PrintConfig.cpp:1467
 msgid "money/kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1484
+#: src/libslic3r/PrintConfig.cpp:1472
 msgid "Spool weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1486
+#: src/libslic3r/PrintConfig.cpp:1474
 msgid ""
 "Enter weight of the empty filament spool. One may weigh a partially consumed "
 "filament spool before printing and one may compare the measured weight with "
@@ -9906,34 +9744,34 @@ msgid ""
 "amount of filament on the spool is sufficient to finish the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1490
+#: src/libslic3r/PrintConfig.cpp:1478
 msgid "g"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1499 src/libslic3r/PrintConfig.cpp:4574
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:4467
 msgid "(Unknown)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1503 src/libslic3r/PrintConfig.cpp:1516
+#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1504
 msgid "Fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1504
+#: src/libslic3r/PrintConfig.cpp:1492
 msgid "Fill angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1506
+#: src/libslic3r/PrintConfig.cpp:1494
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1517
+#: src/libslic3r/PrintConfig.cpp:1505
 msgid "Fill angle increment"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1519
+#: src/libslic3r/PrintConfig.cpp:1507
 msgid ""
 "Add this angle each layer to the base angle for infill. May be useful for "
 "art, or to be sure to hit every object's feature even with very low infill. "
@@ -9941,92 +9779,92 @@ msgid ""
 "arise using it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1531
+#: src/libslic3r/PrintConfig.cpp:1519
 msgid "Fill density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1533
+#: src/libslic3r/PrintConfig.cpp:1521
 #, possible-c-format
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1567
+#: src/libslic3r/PrintConfig.cpp:1555
 msgid "Fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1569
+#: src/libslic3r/PrintConfig.cpp:1557
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1590
+#: src/libslic3r/PrintConfig.cpp:1578
 msgid "Grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1591
+#: src/libslic3r/PrintConfig.cpp:1579
 msgid "Triangles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1592
+#: src/libslic3r/PrintConfig.cpp:1580
 msgid "Stars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1593
+#: src/libslic3r/PrintConfig.cpp:1581
 msgid "Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1594
+#: src/libslic3r/PrintConfig.cpp:1582
 msgid "Line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1596 src/libslic3r/PrintConfig.cpp:3593
+#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:3486
 msgid "Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1597
+#: src/libslic3r/PrintConfig.cpp:1585
 msgid "3D Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1598
+#: src/libslic3r/PrintConfig.cpp:1586
 msgid "Gyroid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1602
+#: src/libslic3r/PrintConfig.cpp:1590
 msgid "Scattered Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1603
+#: src/libslic3r/PrintConfig.cpp:1591
 msgid "Adaptive Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1604
+#: src/libslic3r/PrintConfig.cpp:1592
 msgid "Support Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1608
+#: src/libslic3r/PrintConfig.cpp:1596
 msgid "Top fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1609
+#: src/libslic3r/PrintConfig.cpp:1597
 msgid "Top fill flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1612
+#: src/libslic3r/PrintConfig.cpp:1600
 msgid ""
 "You can increase this to over-extrude on the top layer if there are not "
 "enough plastic to make a good fill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:1630
-#: src/libslic3r/PrintConfig.cpp:1667 src/libslic3r/PrintConfig.cpp:1679
-#: src/libslic3r/PrintConfig.cpp:1690 src/libslic3r/PrintConfig.cpp:1747
+#: src/libslic3r/PrintConfig.cpp:1606 src/libslic3r/PrintConfig.cpp:1618
+#: src/libslic3r/PrintConfig.cpp:1655 src/libslic3r/PrintConfig.cpp:1667
+#: src/libslic3r/PrintConfig.cpp:1678 src/libslic3r/PrintConfig.cpp:1735
 msgid "First layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1619
+#: src/libslic3r/PrintConfig.cpp:1607
 msgid "First layer flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1622
+#: src/libslic3r/PrintConfig.cpp:1610
 msgid ""
 "You can increase this to over-extrude on the first layer if there are not "
 "enough plastic because your bed isn't levelled.\n"
@@ -10034,22 +9872,22 @@ msgid ""
 "Use this setting only as last resort after all calibrations failed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1631
+#: src/libslic3r/PrintConfig.cpp:1619
 msgid "XY First layer compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1633
+#: src/libslic3r/PrintConfig.cpp:1621
 msgid ""
 "The first layer will be grown / shrunk in the XY plane by the configured "
 "value to compensate for the 1st layer squish aka an Elephant Foot effect. "
 "(should be negative = inwards)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1641
+#: src/libslic3r/PrintConfig.cpp:1629
 msgid "Ironing width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1643
+#: src/libslic3r/PrintConfig.cpp:1631
 msgid ""
 "This is the width of the ironing pass, in a % of the top infill extrusion "
 "width, should not be more than 50% (two times more lines, 50% overlap). It's "
@@ -10060,15 +9898,15 @@ msgid ""
 "extruder eat the filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1654
+#: src/libslic3r/PrintConfig.cpp:1642
 msgid "Distribution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1655
+#: src/libslic3r/PrintConfig.cpp:1643
 msgid "Ironing flow distribution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1657
+#: src/libslic3r/PrintConfig.cpp:1645
 msgid ""
 "This is the percentage of the flow that is used for the second ironing pass. "
 "Typical 10-20%. Should not be higher than 20%, unless you have your top "
@@ -10077,11 +9915,11 @@ msgid ""
 "won't print well."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1668
+#: src/libslic3r/PrintConfig.cpp:1656
 msgid "First layer acceleration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1670
+#: src/libslic3r/PrintConfig.cpp:1658
 #, possible-c-format
 msgid ""
 "This is the acceleration your printer will use for first layer.\n"
@@ -10089,21 +9927,21 @@ msgid ""
 "Set zero to disable acceleration control for first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1680
+#: src/libslic3r/PrintConfig.cpp:1668
 msgid "First layer bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1682
+#: src/libslic3r/PrintConfig.cpp:1670
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1691
+#: src/libslic3r/PrintConfig.cpp:1679
 msgid "First layer width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1693
+#: src/libslic3r/PrintConfig.cpp:1681
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -10112,7 +9950,7 @@ msgid ""
 "zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1707
+#: src/libslic3r/PrintConfig.cpp:1695
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
@@ -10120,11 +9958,11 @@ msgid ""
 "example: 75%) over the default nozzle width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1719
+#: src/libslic3r/PrintConfig.cpp:1707
 msgid "Default first layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1721
+#: src/libslic3r/PrintConfig.cpp:1709
 #, possible-c-format
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
@@ -10135,11 +9973,11 @@ msgid ""
 "first_layer_infill_speed)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1734
+#: src/libslic3r/PrintConfig.cpp:1722
 msgid "Infill first layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1736
+#: src/libslic3r/PrintConfig.cpp:1724
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to infill "
 "moves of the first layer, it can be overwrite by the 'default' (solid infill "
@@ -10147,45 +9985,32 @@ msgid ""
 "percentage (for example: 40%) it will scale the current infill speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1748
+#: src/libslic3r/PrintConfig.cpp:1736
 msgid "First layer nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1750
+#: src/libslic3r/PrintConfig.cpp:1738
 msgid ""
 "Extruder nozzle temperature for first layer. If you want to control "
 "temperature manually during print, set this to zero to disable temperature "
 "control commands in the output file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1758
-msgid "Full fan speed at layer"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1759
-msgid ""
-"Fan speed will be ramped up linearly from zero at layer "
-"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
-"\"full_fan_speed_layer\" will be ignored if lower than "
-"\"disable_fan_first_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1770
+#: src/libslic3r/PrintConfig.cpp:1747
 msgid "Enable Gap Fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1772
+#: src/libslic3r/PrintConfig.cpp:1749
 msgid ""
 "Enable gap fill algorithm. It will extrude small lines between perimeters "
 "when there is not enough space for another perimeter or an infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1778
+#: src/libslic3r/PrintConfig.cpp:1755
 msgid "Min surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1781
+#: src/libslic3r/PrintConfig.cpp:1758
 #, possible-c-format
 msgid ""
 "This setting represents the minimum mm² for a gapfill extrusion to be "
@@ -10193,11 +10018,11 @@ msgid ""
 "Can be a % of (perimeter width)²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1788 src/libslic3r/PrintConfig.cpp:1789
+#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1766
 msgid "Gap fill overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1791
+#: src/libslic3r/PrintConfig.cpp:1768
 #, possible-c-format
 msgid ""
 "This setting allow you to reduce the overlap between the perimeters and the "
@@ -10205,35 +10030,36 @@ msgid ""
 "won't touch the perimeters.\n"
 "It's very experimental, please report about the usefulness. It may be "
 "removed if there is no use for it."
-msgstr ""
+msgstr "This setting allow you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps is left, and 0% means that the gap fill won't touch the perimeters.\n"
+"זה מאוד ניסיוני, אנא דווח על התועלת. ניתן להסיר אותו אם אין בו שימוש."
 
-#: src/libslic3r/PrintConfig.cpp:1802
+#: src/libslic3r/PrintConfig.cpp:1779
 msgid "Gap fill speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1804
+#: src/libslic3r/PrintConfig.cpp:1781
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1812
+#: src/libslic3r/PrintConfig.cpp:1789
 msgid "Verbose G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1814
+#: src/libslic3r/PrintConfig.cpp:1791
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1821
+#: src/libslic3r/PrintConfig.cpp:1798
 msgid "G-code flavor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1823
+#: src/libslic3r/PrintConfig.cpp:1800
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -10241,15 +10067,15 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1852
+#: src/libslic3r/PrintConfig.cpp:1829
 msgid "No extrusion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1857
+#: src/libslic3r/PrintConfig.cpp:1834
 msgid "Label objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1859
+#: src/libslic3r/PrintConfig.cpp:1836
 msgid ""
 "Enable this to add comments into the G-Code labeling print moves with what "
 "object they belong to, which is useful for the Octoprint CancelObject "
@@ -10257,22 +10083,22 @@ msgid ""
 "setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1867
+#: src/libslic3r/PrintConfig.cpp:1844
 msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1869
+#: src/libslic3r/PrintConfig.cpp:1846
 msgid ""
 "It may be beneficial to increase the extruder motor current during the "
 "filament exchange sequence to allow for rapid ramming feed rates and to "
 "overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1877
+#: src/libslic3r/PrintConfig.cpp:1854
 msgid "Infill acceleration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1879
+#: src/libslic3r/PrintConfig.cpp:1856
 #, possible-c-format
 msgid ""
 "This is the acceleration your printer will use for infill.\n"
@@ -10280,69 +10106,42 @@ msgid ""
 "Set zero to disable acceleration control for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1888
+#: src/libslic3r/PrintConfig.cpp:1865
 msgid "Combine infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1890
+#: src/libslic3r/PrintConfig.cpp:1867
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1893
+#: src/libslic3r/PrintConfig.cpp:1870
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1899
+#: src/libslic3r/PrintConfig.cpp:1876
 msgid "Length of the infill anchor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1901
+#: src/libslic3r/PrintConfig.cpp:1878
 msgid ""
 "Connect an infill line to an internal perimeter with a short segment of an "
 "additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than infill_anchor_max is found, the infill line is "
-"connected to a perimeter segment at just one side and the length of the "
-"perimeter segment taken is limited to this parameter, but no longer than "
-"anchor_length_max. \n"
-"Set this parameter to zero to disable anchoring perimeters connected to a "
-"single infill line."
+"calculated over infill extrusion width.\n"
+"If set to 0, it will use a simpler algo that don't try to create a fake "
+"perimeter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1916
-msgid "0 (no open anchors)"
+#: src/libslic3r/PrintConfig.cpp:1890
+msgid "0 (Simple connect)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1943
+#: src/libslic3r/PrintConfig.cpp:1895
 msgid "1000 (unlimited)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1926
-msgid "Maximum length of the infill anchor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1928
-msgid ""
-"Connect an infill line to an internal perimeter with a short segment of an "
-"additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than this parameter is found, the infill line is connected "
-"to a perimeter segment at just one side and the length of the perimeter "
-"segment taken is limited to infill_anchor, but no longer than this "
-"parameter. \n"
-"If set to 0, the old algorithm for infill connection will be used, it should "
-"create the same result as with 1000 & 0."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1938
-msgid "0 (Simple connect)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1951
+#: src/libslic3r/PrintConfig.cpp:1904
 #, possible-c-format
 msgid ""
 "Enables the creation of a support layer under the first solid layer. This "
@@ -10350,55 +10149,38 @@ msgid ""
 "The dense infill is laid out with a 50% infill density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1957
-msgid "Connection of sparse infill lines"
+#: src/libslic3r/PrintConfig.cpp:1910
+msgid "Do not connect infill lines to each other"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1959 src/libslic3r/PrintConfig.cpp:1977
-#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2013
+#: src/libslic3r/PrintConfig.cpp:1912
 msgid ""
 "Give to the infill algorithm if the infill needs to be connected, and on "
 "which periemters Can be useful for art or with high infill/perimeter "
-"overlap. The result may varies between infill typers."
+"overlap. The result amy varies between infill typers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1967 src/libslic3r/PrintConfig.cpp:1985
-#: src/libslic3r/PrintConfig.cpp:2003 src/libslic3r/PrintConfig.cpp:2021
+#: src/libslic3r/PrintConfig.cpp:1920
 msgid "Connected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1968 src/libslic3r/PrintConfig.cpp:1986
-#: src/libslic3r/PrintConfig.cpp:2004 src/libslic3r/PrintConfig.cpp:2022
+#: src/libslic3r/PrintConfig.cpp:1921
 msgid "Connected to hole perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1969 src/libslic3r/PrintConfig.cpp:1987
-#: src/libslic3r/PrintConfig.cpp:2005 src/libslic3r/PrintConfig.cpp:2023
+#: src/libslic3r/PrintConfig.cpp:1922
 msgid "Connected to outer perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1970 src/libslic3r/PrintConfig.cpp:1988
-#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2024
+#: src/libslic3r/PrintConfig.cpp:1923
 msgid "Not connected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1975
-msgid "Connection of top infill lines"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1993
-msgid "Connection of bottom infill lines"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2011
-msgid "Connection of solid infill lines"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2029 src/libslic3r/PrintConfig.cpp:3967
+#: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:3860
 msgid "Algorithm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2032
+#: src/libslic3r/PrintConfig.cpp:1931
 msgid ""
 "Choose the way the dense layer is lay out. The automatic option let it try "
 "to draw the smallest surface with only strait lines inside the sparse "
@@ -10406,27 +10188,27 @@ msgid ""
 "surfaces that need a better support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2039
+#: src/libslic3r/PrintConfig.cpp:1938
 msgid "Automatic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2040
+#: src/libslic3r/PrintConfig.cpp:1939
 msgid "Automatic, only for small areas"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2041
+#: src/libslic3r/PrintConfig.cpp:1940
 msgid "Anchored"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2046
+#: src/libslic3r/PrintConfig.cpp:1945
 msgid "Infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2048
+#: src/libslic3r/PrintConfig.cpp:1947
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2056
+#: src/libslic3r/PrintConfig.cpp:1955
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -10435,32 +10217,32 @@ msgid ""
 "example 110%) it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2067
+#: src/libslic3r/PrintConfig.cpp:1966
 msgid "Infill before perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2069
+#: src/libslic3r/PrintConfig.cpp:1968
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2074
+#: src/libslic3r/PrintConfig.cpp:1973
 msgid "Only infill where needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2076
+#: src/libslic3r/PrintConfig.cpp:1975
 msgid ""
 "This option will limit infill to the areas actually needed for supporting "
 "ceilings (it will act as internal support material). If enabled, slows down "
 "the G-code generation due to the multiple checks involved."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2083
+#: src/libslic3r/PrintConfig.cpp:1982
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2085
+#: src/libslic3r/PrintConfig.cpp:1984
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -10468,81 +10250,69 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2094
+#: src/libslic3r/PrintConfig.cpp:1993
 msgid "Sparse"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2097
+#: src/libslic3r/PrintConfig.cpp:1996
 msgid "Speed for printing the internal fill. Set to zero for auto."
-msgstr ""
+msgstr "Speed for printing the internal fill. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:2105
+#: src/libslic3r/PrintConfig.cpp:2004
 msgid "Inherits profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2106
+#: src/libslic3r/PrintConfig.cpp:2005
 msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2119
+#: src/libslic3r/PrintConfig.cpp:2018
 msgid "Interface shells"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2120
+#: src/libslic3r/PrintConfig.cpp:2019
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2128
+#: src/libslic3r/PrintConfig.cpp:2027
 msgid "Enable ironing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2129
+#: src/libslic3r/PrintConfig.cpp:2028
 msgid ""
 "Enable ironing of the top layers with the hot print head for smooth surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2137
+#: src/libslic3r/PrintConfig.cpp:2034 src/libslic3r/PrintConfig.cpp:2036
 msgid "Ironing Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2142
-msgid "All top surfaces"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2143
-msgid "Topmost surface only"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2144
-msgid "All solid surfaces"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2149
+#: src/libslic3r/PrintConfig.cpp:2048
 msgid "Flow rate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2151
+#: src/libslic3r/PrintConfig.cpp:2050
 msgid ""
 "Percent of a flow rate relative to object's normal layer height. It's the "
 "percentage of the layer that will be over-extruded on top to do the ironing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2160
+#: src/libslic3r/PrintConfig.cpp:2059
 msgid "Spacing between ironing lines"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2162
+#: src/libslic3r/PrintConfig.cpp:2061
 msgid "Distance between ironing lines"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2178 src/libslic3r/PrintConfig.cpp:2191
+#: src/libslic3r/PrintConfig.cpp:2077 src/libslic3r/PrintConfig.cpp:2090
 msgid "After layer change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2180
+#: src/libslic3r/PrintConfig.cpp:2079
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -10550,7 +10320,7 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2193
+#: src/libslic3r/PrintConfig.cpp:2092
 msgid ""
 "This custom code is inserted at every extrusion type change.Note that you "
 "can use placeholder variables for all Slic3r settings as well as "
@@ -10562,21 +10332,21 @@ msgid ""
 "not known."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2205
+#: src/libslic3r/PrintConfig.cpp:2104
 msgid "Exact last layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2207
+#: src/libslic3r/PrintConfig.cpp:2106
 msgid ""
 "This setting controls the height of last object layers to put the last layer "
 "at the exact highest height possible. Experimental."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2212
+#: src/libslic3r/PrintConfig.cpp:2111
 msgid "Supports remaining times"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2214
+#: src/libslic3r/PrintConfig.cpp:2113
 msgid ""
 "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
 "intervals into the G-code to let the firmware show accurate remaining time. "
@@ -10584,49 +10354,49 @@ msgid ""
 "firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2222
+#: src/libslic3r/PrintConfig.cpp:2121
 msgid "Supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2224
+#: src/libslic3r/PrintConfig.cpp:2123
 msgid "The firmware supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2229 src/libslic3r/PrintConfig.cpp:2238
+#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2137
 msgid "Fan startup delay"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2231
+#: src/libslic3r/PrintConfig.cpp:2130
 msgid ""
 "Move the fan start in the past by at least this delay (in seconds, you can "
 "use decimals). It assumes infinite acceleration for this time estimation, "
 "and will only take into account G1 and G0 moves. Use 0 to deactivate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2240
+#: src/libslic3r/PrintConfig.cpp:2139
 msgid "Will only take into account the delay for the cooling of overhangs."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2245
+#: src/libslic3r/PrintConfig.cpp:2144
 msgid "Fan KickStart time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2247
+#: src/libslic3r/PrintConfig.cpp:2146
 msgid ""
 "Add a M106 S255 (max speed for fan) for this amount of seconds before gonig "
 "down to the desired speed to kick-start the cooling fan.\n"
 "Set to 0 to deactivate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2255
+#: src/libslic3r/PrintConfig.cpp:2154
 msgid "How to apply limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2256
+#: src/libslic3r/PrintConfig.cpp:2155
 msgid "Purpose of Machine Limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2258
+#: src/libslic3r/PrintConfig.cpp:2157
 msgid ""
 "How to apply the Machine Limits.\n"
 "* In every case, they will be used as safeguard: Even if you use a print "
@@ -10640,174 +10410,174 @@ msgid ""
 "time estimate' option and write yourself gcodes in the custom gcode section."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2269
+#: src/libslic3r/PrintConfig.cpp:2168
 msgid "Also emit limits to G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2270
+#: src/libslic3r/PrintConfig.cpp:2169
 msgid "Use also for time estimate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2271
+#: src/libslic3r/PrintConfig.cpp:2170
 msgid "Use only as safeguards"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2272
+#: src/libslic3r/PrintConfig.cpp:2171
 msgid "Disable"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2295
+#: src/libslic3r/PrintConfig.cpp:2194
 msgid "Maximum feedrate X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2296
+#: src/libslic3r/PrintConfig.cpp:2195
 msgid "Maximum feedrate Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2297
+#: src/libslic3r/PrintConfig.cpp:2196
 msgid "Maximum feedrate Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2298
+#: src/libslic3r/PrintConfig.cpp:2197
 msgid "Maximum feedrate E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2301
+#: src/libslic3r/PrintConfig.cpp:2200
 msgid "Maximum feedrate of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2302
+#: src/libslic3r/PrintConfig.cpp:2201
 msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2303
+#: src/libslic3r/PrintConfig.cpp:2202
 msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2304
+#: src/libslic3r/PrintConfig.cpp:2203
 msgid "Maximum feedrate of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2312
+#: src/libslic3r/PrintConfig.cpp:2211
 msgid "Maximum acceleration X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2313
+#: src/libslic3r/PrintConfig.cpp:2212
 msgid "Maximum acceleration Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2314
+#: src/libslic3r/PrintConfig.cpp:2213
 msgid "Maximum acceleration Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2315
+#: src/libslic3r/PrintConfig.cpp:2214
 msgid "Maximum acceleration E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2318
+#: src/libslic3r/PrintConfig.cpp:2217
 msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2319
+#: src/libslic3r/PrintConfig.cpp:2218
 msgid "Maximum acceleration of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2320
+#: src/libslic3r/PrintConfig.cpp:2219
 msgid "Maximum acceleration of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2321
+#: src/libslic3r/PrintConfig.cpp:2220
 msgid "Maximum acceleration of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2322 src/libslic3r/PrintConfig.cpp:2371
-#: src/libslic3r/PrintConfig.cpp:2381 src/libslic3r/PrintConfig.cpp:2391
+#: src/libslic3r/PrintConfig.cpp:2221 src/libslic3r/PrintConfig.cpp:2270
+#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290
 msgid "mm/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2329
+#: src/libslic3r/PrintConfig.cpp:2228
 msgid "Maximum jerk X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2330
+#: src/libslic3r/PrintConfig.cpp:2229
 msgid "Maximum jerk Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2331
+#: src/libslic3r/PrintConfig.cpp:2230
 msgid "Maximum jerk Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2332
+#: src/libslic3r/PrintConfig.cpp:2231
 msgid "Maximum jerk E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2335
+#: src/libslic3r/PrintConfig.cpp:2234
 msgid "Maximum jerk of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2336
+#: src/libslic3r/PrintConfig.cpp:2235
 msgid "Maximum jerk of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2337
+#: src/libslic3r/PrintConfig.cpp:2236
 msgid "Maximum jerk of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2338
+#: src/libslic3r/PrintConfig.cpp:2237
 msgid "Maximum jerk of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2348
+#: src/libslic3r/PrintConfig.cpp:2247
 msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2350
+#: src/libslic3r/PrintConfig.cpp:2249
 msgid "Minimum feedrate when extruding (M205 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2358
+#: src/libslic3r/PrintConfig.cpp:2257
 msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2360
+#: src/libslic3r/PrintConfig.cpp:2259
 msgid "Minimum travel feedrate (M205 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2368
+#: src/libslic3r/PrintConfig.cpp:2267
 msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2370
+#: src/libslic3r/PrintConfig.cpp:2269
 msgid "Maximum acceleration when extruding (M204 P)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2378
+#: src/libslic3r/PrintConfig.cpp:2277
 msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2380
+#: src/libslic3r/PrintConfig.cpp:2279
 msgid "Maximum acceleration when retracting (M204 R)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2388
+#: src/libslic3r/PrintConfig.cpp:2287
 msgid "Maximum acceleration when travelling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2390
+#: src/libslic3r/PrintConfig.cpp:2289
 msgid "Maximum acceleration when travelling (M204 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2397 src/libslic3r/PrintConfig.cpp:2408
+#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2307
 msgid "Max"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2400
+#: src/libslic3r/PrintConfig.cpp:2299
 msgid ""
 "This setting represents the maximum speed of your fan, used when the layer "
 "print time is Very short."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2411
+#: src/libslic3r/PrintConfig.cpp:2310
 #, possible-c-format
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
@@ -10816,36 +10586,36 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2421
+#: src/libslic3r/PrintConfig.cpp:2320
 msgid "Max print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2423
+#: src/libslic3r/PrintConfig.cpp:2322
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2432
+#: src/libslic3r/PrintConfig.cpp:2331
 msgid "Max speed reduction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2434
+#: src/libslic3r/PrintConfig.cpp:2333
 msgid "Set to 90% if you don't want the speed to be reduced by more than 90%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2444
+#: src/libslic3r/PrintConfig.cpp:2343
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2453
+#: src/libslic3r/PrintConfig.cpp:2352
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2454 src/libslic3r/PrintConfig.cpp:2466
+#: src/libslic3r/PrintConfig.cpp:2353 src/libslic3r/PrintConfig.cpp:2365
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
@@ -10853,51 +10623,51 @@ msgid ""
 "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2458 src/libslic3r/PrintConfig.cpp:2470
+#: src/libslic3r/PrintConfig.cpp:2357 src/libslic3r/PrintConfig.cpp:2369
 msgid "mm³/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2465
+#: src/libslic3r/PrintConfig.cpp:2364
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2478
+#: src/libslic3r/PrintConfig.cpp:2377
 msgid "Default fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2481
+#: src/libslic3r/PrintConfig.cpp:2380
 msgid ""
 "This setting represents the base fan speed this filament needs, or at least "
 "the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2489
+#: src/libslic3r/PrintConfig.cpp:2388
 msgid "Min"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2492
+#: src/libslic3r/PrintConfig.cpp:2391
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2500
+#: src/libslic3r/PrintConfig.cpp:2399
 msgid "Minimum extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2502
+#: src/libslic3r/PrintConfig.cpp:2401
 msgid ""
 "Too many too small commands may overload the firmware / connection. Put a "
 "higher value here if you see strange slowdown.\n"
 "0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2510
+#: src/libslic3r/PrintConfig.cpp:2409
 msgid "Minimum top width for infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2512
+#: src/libslic3r/PrintConfig.cpp:2411
 #, possible-c-format
 msgid ""
 "If a top surface has to be printed and it's partially covered by an other "
@@ -10907,82 +10677,76 @@ msgid ""
 "a % of the perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2522
+#: src/libslic3r/PrintConfig.cpp:2421
 msgid "Min print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2524
+#: src/libslic3r/PrintConfig.cpp:2423
 msgid "Slic3r will never scale the speed below this one."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2531
+#: src/libslic3r/PrintConfig.cpp:2430
 msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2533
+#: src/libslic3r/PrintConfig.cpp:2432
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2542
+#: src/libslic3r/PrintConfig.cpp:2441
 msgid "Configuration notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2544
+#: src/libslic3r/PrintConfig.cpp:2443
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2555
+#: src/libslic3r/PrintConfig.cpp:2454
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2561
+#: src/libslic3r/PrintConfig.cpp:2460
 msgid "Host Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2563
+#: src/libslic3r/PrintConfig.cpp:2462
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field must contain "
 "the kind of the host."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2597
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field should contain "
-"the hostname, IP address or URL of the printer host instance."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2603
+#: src/libslic3r/PrintConfig.cpp:2502
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2605
+#: src/libslic3r/PrintConfig.cpp:2504
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2611 src/libslic3r/PrintConfig.cpp:3910
+#: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:3803
 msgid "Enable"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2613
+#: src/libslic3r/PrintConfig.cpp:2512
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing. It will enable a tall skirt automatically and move extruders outside "
 "such skirt when changing temperatures."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2620
+#: src/libslic3r/PrintConfig.cpp:2519
 msgid "Output filename format"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2622
+#: src/libslic3r/PrintConfig.cpp:2521
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
@@ -10990,30 +10754,30 @@ msgid ""
 "[input_filename], [input_filename_base]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2631
+#: src/libslic3r/PrintConfig.cpp:2530
 msgid "Overhangs"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2632
+#: src/libslic3r/PrintConfig.cpp:2531
 msgid "Overhangs speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2634
+#: src/libslic3r/PrintConfig.cpp:2533
 #, possible-c-format
 msgid ""
 "Speed for printing overhangs.\n"
 "Can be a % of the bridge speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2642
+#: src/libslic3r/PrintConfig.cpp:2541
 msgid "'As bridge' speed threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2643
+#: src/libslic3r/PrintConfig.cpp:2542
 msgid "Overhang bridge speed threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2645
+#: src/libslic3r/PrintConfig.cpp:2544
 #, possible-c-format
 msgid ""
 "Minimum unsupported width for an extrusion to apply the bridge speed & fan "
@@ -11021,15 +10785,15 @@ msgid ""
 "deactivate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2654
+#: src/libslic3r/PrintConfig.cpp:2553
 msgid "'As bridge' flow threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2655
+#: src/libslic3r/PrintConfig.cpp:2554
 msgid "Overhang bridge flow threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2657
+#: src/libslic3r/PrintConfig.cpp:2556
 #, possible-c-format
 msgid ""
 "Minimum unsupported width for an extrusion to apply the bridge flow to this "
@@ -11037,15 +10801,15 @@ msgid ""
 "deactivate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2666
+#: src/libslic3r/PrintConfig.cpp:2565
 msgid "Reverse on odd"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2667
+#: src/libslic3r/PrintConfig.cpp:2566
 msgid "Overhang reversal"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2669
+#: src/libslic3r/PrintConfig.cpp:2568
 msgid ""
 "Extrude perimeters that have a part over an overhang in the reverse "
 "direction in odd layers. That alternating pattern can drastically improve "
@@ -11054,26 +10818,26 @@ msgid ""
 "extra_perimeters_overhangs) !!"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2675
+#: src/libslic3r/PrintConfig.cpp:2574
 msgid "Reverse threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2676
+#: src/libslic3r/PrintConfig.cpp:2575
 msgid "Overhang reversal threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2678
+#: src/libslic3r/PrintConfig.cpp:2577
 #, possible-c-format
 msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2685
+#: src/libslic3r/PrintConfig.cpp:2584
 msgid "No perimeters on bridge areas"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2687
+#: src/libslic3r/PrintConfig.cpp:2586
 msgid ""
 "Experimental option to remove perimeters where there is nothing under it and "
 "where a bridged infill should be better. \n"
@@ -11089,43 +10853,48 @@ msgid ""
 "overhangs shape like  /\\, so you should use it only on one layer at a time "
 "via the height-range modifier!\n"
 "!!Computationally intensive!!. "
-msgstr ""
+msgstr "Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. \n"
+" * Remove perimeters: remove the unsupported perimeters, let the bridge area as-is.\n"
+" * Keep only bridges: remove the perimeters in the bridge areas, keep only bridges that end in solid area.\n"
+" * Keep bridges and overhangs: remove the unsupported perimeters, keep only bridges that end in solid area, fill the rest with overhang perimeters+bridges.\n"
+" * Fill the voids with bridges: remove the unsupported perimeters, draw bridges over the whole hole.* !! this one can escalate to problems with overhangs shape like  /\\, so you should use it only on one layer at a time via the height-range modifier!\n"
+"!!Computationally intensive!!. "
 
-#: src/libslic3r/PrintConfig.cpp:2700
+#: src/libslic3r/PrintConfig.cpp:2599
 msgid "Disabled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2701
+#: src/libslic3r/PrintConfig.cpp:2600
 msgid "Remove perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2702
+#: src/libslic3r/PrintConfig.cpp:2601
 msgid "Keep only bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2703
+#: src/libslic3r/PrintConfig.cpp:2602
 msgid "Keep bridges and overhangs"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2704
+#: src/libslic3r/PrintConfig.cpp:2603
 msgid "Fill the voids with bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2709
+#: src/libslic3r/PrintConfig.cpp:2608
 msgid "Filament parking position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2710
+#: src/libslic3r/PrintConfig.cpp:2609
 msgid ""
 "Distance of the extruder tip from the position where the filament is parked "
 "when unloaded. This should match the value in printer firmware. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2718
+#: src/libslic3r/PrintConfig.cpp:2617
 msgid "Extra loading distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2719
+#: src/libslic3r/PrintConfig.cpp:2618
 msgid ""
 "When set to zero, the distance the filament is moved from parking position "
 "during load is exactly the same as it was moved back during unload. When "
@@ -11133,29 +10902,30 @@ msgid ""
 "than unloading. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2727 src/libslic3r/PrintConfig.cpp:2747
-#: src/libslic3r/PrintConfig.cpp:2772
+#: src/libslic3r/PrintConfig.cpp:2626 src/libslic3r/PrintConfig.cpp:2647
+#: src/libslic3r/PrintConfig.cpp:2672
 msgid "Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2730
+#: src/libslic3r/PrintConfig.cpp:2629
 #, possible-c-format
 msgid ""
-"This is the acceleration your printer will use for perimeters. \n"
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job.\n"
 "Can be a % of the default acceleration\n"
 "Set zero to disable acceleration control for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2738
+#: src/libslic3r/PrintConfig.cpp:2638
 msgid "Perimeter extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2740
+#: src/libslic3r/PrintConfig.cpp:2640
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2750
+#: src/libslic3r/PrintConfig.cpp:2650
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -11164,12 +10934,12 @@ msgid ""
 "it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2764
+#: src/libslic3r/PrintConfig.cpp:2664
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
-msgstr ""
+msgstr "Speed for perimeters (contours, aka vertical shells). הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:2775
+#: src/libslic3r/PrintConfig.cpp:2675
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -11177,15 +10947,15 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2779
+#: src/libslic3r/PrintConfig.cpp:2679
 msgid "(minimum)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2786
+#: src/libslic3r/PrintConfig.cpp:2686
 msgid "Post-processing scripts"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2788
+#: src/libslic3r/PrintConfig.cpp:2688
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -11194,64 +10964,64 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2800
+#: src/libslic3r/PrintConfig.cpp:2700
 msgid "Printer type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2801
+#: src/libslic3r/PrintConfig.cpp:2701
 msgid "Type of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2806
+#: src/libslic3r/PrintConfig.cpp:2706
 msgid "Printer notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2808
+#: src/libslic3r/PrintConfig.cpp:2708
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2816
+#: src/libslic3r/PrintConfig.cpp:2716
 msgid "Printer vendor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2817
+#: src/libslic3r/PrintConfig.cpp:2717
 msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2822
+#: src/libslic3r/PrintConfig.cpp:2722
 msgid "Printer variant"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2823
+#: src/libslic3r/PrintConfig.cpp:2723
 msgid ""
 "Name of the printer variant. For example, the printer variants may be "
 "differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2840
+#: src/libslic3r/PrintConfig.cpp:2736
 msgid "Solid first layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2842
+#: src/libslic3r/PrintConfig.cpp:2738
 msgid ""
 "Use a solid layer instead of a raft for the layer that touch the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2847
+#: src/libslic3r/PrintConfig.cpp:2743
 msgid "Raft layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2849
+#: src/libslic3r/PrintConfig.cpp:2745
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2857
+#: src/libslic3r/PrintConfig.cpp:2753
 msgid "Resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2859
+#: src/libslic3r/PrintConfig.cpp:2755
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -11261,321 +11031,321 @@ msgid ""
 "internal resolution of 0.0001mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2870
+#: src/libslic3r/PrintConfig.cpp:2766
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2872
+#: src/libslic3r/PrintConfig.cpp:2768
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2879
+#: src/libslic3r/PrintConfig.cpp:2775
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2881
+#: src/libslic3r/PrintConfig.cpp:2777
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2888
+#: src/libslic3r/PrintConfig.cpp:2784
 msgid "Retract on layer change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2890
-msgid "This flag enforces a retraction whenever a Z move is done (before it)."
+#: src/libslic3r/PrintConfig.cpp:2786
+msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2895 src/libslic3r/PrintConfig.cpp:2912
+#: src/libslic3r/PrintConfig.cpp:2791 src/libslic3r/PrintConfig.cpp:2808
 msgid "Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2896
+#: src/libslic3r/PrintConfig.cpp:2792
 msgid "Retraction Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2898
+#: src/libslic3r/PrintConfig.cpp:2794
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2900 src/libslic3r/PrintConfig.cpp:2917
+#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2813
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2905
+#: src/libslic3r/PrintConfig.cpp:2801
 msgid "Retraction length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2907
+#: src/libslic3r/PrintConfig.cpp:2803
 msgid ""
 "Override the retract_length settign from the printer config. Used for "
 "calibration. Set negative to disable"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2913
+#: src/libslic3r/PrintConfig.cpp:2809
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2914
+#: src/libslic3r/PrintConfig.cpp:2810
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2923
+#: src/libslic3r/PrintConfig.cpp:2819
 msgid "Lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2925
+#: src/libslic3r/PrintConfig.cpp:2821
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2932
+#: src/libslic3r/PrintConfig.cpp:2828
 msgid "Above Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2933
+#: src/libslic3r/PrintConfig.cpp:2829
 msgid "Only lift Z above"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2935
+#: src/libslic3r/PrintConfig.cpp:2831
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2942
+#: src/libslic3r/PrintConfig.cpp:2838
 msgid "Below Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2943
+#: src/libslic3r/PrintConfig.cpp:2839
 msgid "Only lift Z below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2945
+#: src/libslic3r/PrintConfig.cpp:2841
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2953
+#: src/libslic3r/PrintConfig.cpp:2849
 msgid "Enforce on first layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2954
+#: src/libslic3r/PrintConfig.cpp:2850
 msgid "Enforce lift on first layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2956
+#: src/libslic3r/PrintConfig.cpp:2852
 msgid "Select this option to enforce z-lift on the first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2961
+#: src/libslic3r/PrintConfig.cpp:2857
 msgid "On surfaces"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2962
+#: src/libslic3r/PrintConfig.cpp:2858
 msgid "Lift only on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2964
+#: src/libslic3r/PrintConfig.cpp:2860
 msgid "Select this option to not use/enforce the z-lift on a top surface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2975 src/libslic3r/PrintConfig.cpp:2983
+#: src/libslic3r/PrintConfig.cpp:2871 src/libslic3r/PrintConfig.cpp:2879
 msgid "Extra length on restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2976
+#: src/libslic3r/PrintConfig.cpp:2872
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2984
+#: src/libslic3r/PrintConfig.cpp:2880
 msgid "Extrat length on toolchange restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2985
+#: src/libslic3r/PrintConfig.cpp:2881
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2992 src/libslic3r/PrintConfig.cpp:2993
+#: src/libslic3r/PrintConfig.cpp:2888 src/libslic3r/PrintConfig.cpp:2889
 msgid "Retraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2995
+#: src/libslic3r/PrintConfig.cpp:2891
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3001 src/libslic3r/PrintConfig.cpp:3002
+#: src/libslic3r/PrintConfig.cpp:2897 src/libslic3r/PrintConfig.cpp:2898
 msgid "Deretraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3004
+#: src/libslic3r/PrintConfig.cpp:2900
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3013
+#: src/libslic3r/PrintConfig.cpp:2909
 msgid ""
 "Position of perimeters starting points.\n"
 " "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3020
+#: src/libslic3r/PrintConfig.cpp:2916
 msgid "Cost-based"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3021
+#: src/libslic3r/PrintConfig.cpp:2917
 msgid "Random"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3022
+#: src/libslic3r/PrintConfig.cpp:2918
 msgid "Aligned"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3028
+#: src/libslic3r/PrintConfig.cpp:2924
 msgid "Angle cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3029
+#: src/libslic3r/PrintConfig.cpp:2925
 msgid "Seam angle cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3031
+#: src/libslic3r/PrintConfig.cpp:2927
 msgid ""
 "Cost of placing the seam at a bad angle. The worst angle (max penalty) is "
 "when it's flat."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3038
+#: src/libslic3r/PrintConfig.cpp:2934
 msgid "Travel cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3039
+#: src/libslic3r/PrintConfig.cpp:2935
 msgid "Seam travel cost"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3041
+#: src/libslic3r/PrintConfig.cpp:2937
 msgid ""
 "Cost of moving the extruder. The highest penalty is when the point is the "
 "farest from the position of the extruder before extruding the external "
 "periemter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3050
+#: src/libslic3r/PrintConfig.cpp:2946
 msgid "Direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3052
+#: src/libslic3r/PrintConfig.cpp:2948
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3053
+#: src/libslic3r/PrintConfig.cpp:2949
 msgid "Seam preferred direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3061
+#: src/libslic3r/PrintConfig.cpp:2957
 msgid "Jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3063
+#: src/libslic3r/PrintConfig.cpp:2959
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3064
+#: src/libslic3r/PrintConfig.cpp:2960
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3072
+#: src/libslic3r/PrintConfig.cpp:2968
 msgid "Distance from object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3074
+#: src/libslic3r/PrintConfig.cpp:2970
 msgid ""
 "Distance between skirt and object(s). Set this to zero to attach the skirt "
 "to the object(s) and get a brim for better adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3082
+#: src/libslic3r/PrintConfig.cpp:2978
 msgid "Skirt height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3084
+#: src/libslic3r/PrintConfig.cpp:2980
 msgid ""
 "Height of skirt expressed in layers. Set this to a tall value to use skirt "
 "as a shield against drafts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3093
+#: src/libslic3r/PrintConfig.cpp:2989
 msgid "Horizontal width of the skirt that will be printed around each object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3100
+#: src/libslic3r/PrintConfig.cpp:2996
 msgid "Draft shield"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3101
+#: src/libslic3r/PrintConfig.cpp:2997
 msgid ""
 "If enabled, the skirt will be as tall as a highest printed object. This is "
 "useful to protect an ABS or ASA print from warping and detaching from print "
 "bed due to wind draft."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3107
+#: src/libslic3r/PrintConfig.cpp:3003
 msgid "Loops (minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3108
+#: src/libslic3r/PrintConfig.cpp:3004
 msgid "Skirt Loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3110
+#: src/libslic3r/PrintConfig.cpp:3006
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3118
+#: src/libslic3r/PrintConfig.cpp:3014
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3120
+#: src/libslic3r/PrintConfig.cpp:3016
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value, if possible.\n"
 "Set to 0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3133
+#: src/libslic3r/PrintConfig.cpp:3029
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
+msgstr "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:3143
+#: src/libslic3r/PrintConfig.cpp:3039
 msgid "Min length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3146
+#: src/libslic3r/PrintConfig.cpp:3042
 #, possible-c-format
 msgid ""
 "This set the threshold for small periemter length. Every loop with a length "
@@ -11583,11 +11353,11 @@ msgid ""
 "Can be a mm or a % of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3156
+#: src/libslic3r/PrintConfig.cpp:3052
 msgid "Max length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3159
+#: src/libslic3r/PrintConfig.cpp:3055
 #, possible-c-format
 msgid ""
 "This set the end of the threshold for small periemter length. Every "
@@ -11596,45 +11366,45 @@ msgid ""
 "Can be a mm or a % of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3169
+#: src/libslic3r/PrintConfig.cpp:3065
 msgid "Min convex angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3170
+#: src/libslic3r/PrintConfig.cpp:3066
 msgid "Curve smoothing minimum angle (convex)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3172
+#: src/libslic3r/PrintConfig.cpp:3068
 msgid ""
 "Minimum (convex) angle at a vertex to enable smoothing (trying to create a "
 "curve around the vertex). 180 : nothing will be smooth, 0 : all angles will "
 "be smoothen."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3184
+#: src/libslic3r/PrintConfig.cpp:3080
 msgid "Min concave angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3185
+#: src/libslic3r/PrintConfig.cpp:3081
 msgid "Curve smoothing minimum angle (concave)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3187
+#: src/libslic3r/PrintConfig.cpp:3083
 msgid ""
 "Minimum (concave) angle at a vertex to enable smoothing (trying to create a "
 "curve around the vertex). 180 : nothing will be smooth, 0 : all angles will "
 "be smoothen."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3198
+#: src/libslic3r/PrintConfig.cpp:3094
 msgid "Precision"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3199
+#: src/libslic3r/PrintConfig.cpp:3095
 msgid "Curve smoothing precision"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3201
+#: src/libslic3r/PrintConfig.cpp:3097
 msgid ""
 "These parameter allow the slicer to smooth the angles in each layer. The "
 "precision will be at least the new precision of the curve. Set to 0 to "
@@ -11644,47 +11414,47 @@ msgid ""
 "It's really only useful to smoothen functional models or very wide angles."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3213
+#: src/libslic3r/PrintConfig.cpp:3109
 msgid "cutoff"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3214
+#: src/libslic3r/PrintConfig.cpp:3110
 msgid "Curve smoothing cutoff dist"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3216
+#: src/libslic3r/PrintConfig.cpp:3112
 msgid ""
 "Maximum distance between two points to allow adding new ones. Allow to avoid "
 "distording long strait areas. 0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3224
+#: src/libslic3r/PrintConfig.cpp:3120
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3226
+#: src/libslic3r/PrintConfig.cpp:3122
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3227 src/libslic3r/PrintConfig.cpp:4096
+#: src/libslic3r/PrintConfig.cpp:3123 src/libslic3r/PrintConfig.cpp:3989
 msgid "mm²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3233
+#: src/libslic3r/PrintConfig.cpp:3129
 msgid "Solid infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3235
+#: src/libslic3r/PrintConfig.cpp:3131
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3241
+#: src/libslic3r/PrintConfig.cpp:3137
 msgid "Solid infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3243
+#: src/libslic3r/PrintConfig.cpp:3139
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -11692,7 +11462,7 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3256
+#: src/libslic3r/PrintConfig.cpp:3152
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -11700,34 +11470,34 @@ msgid ""
 "(for example 110%) it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3266
+#: src/libslic3r/PrintConfig.cpp:3162
 msgid "Solid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3269
+#: src/libslic3r/PrintConfig.cpp:3165
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed. Set to zero for auto."
-msgstr ""
+msgstr "Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:3280
+#: src/libslic3r/PrintConfig.cpp:3176
 msgid "Solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3282
+#: src/libslic3r/PrintConfig.cpp:3178
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3288 src/libslic3r/PrintConfig.cpp:3289
+#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3185
 msgid "Minimum thickness of a top / bottom shell"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3295
+#: src/libslic3r/PrintConfig.cpp:3191
 msgid "Spiral vase"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3297
+#: src/libslic3r/PrintConfig.cpp:3193
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
@@ -11736,22 +11506,22 @@ msgid ""
 "when printing more than an object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3305
+#: src/libslic3r/PrintConfig.cpp:3201
 msgid "Temperature variation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3306
+#: src/libslic3r/PrintConfig.cpp:3202
 msgid ""
 "Temperature difference to be applied when an extruder is not active. Enables "
 "a full-height \"sacrificial\" skirt on which the nozzles are periodically "
 "wiped."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3315 src/libslic3r/PrintConfig.cpp:3332
+#: src/libslic3r/PrintConfig.cpp:3211 src/libslic3r/PrintConfig.cpp:3228
 msgid "Start G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3317
+#: src/libslic3r/PrintConfig.cpp:3213
 msgid ""
 "This start procedure is inserted at the beginning, after bed has reached the "
 "target temperature and extruder just started heating, and before extruder "
@@ -11763,9 +11533,10 @@ msgid ""
 " placeholders: initial_extruder, total_layer_count, has_wipe_tower, "
 "has_single_extruder_multi_material_priming, total_toolchanges, bounding_box"
 "[minx,miny,maxx,maxy]"
-msgstr ""
+msgstr "This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want.\n"
+" placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy]"
 
-#: src/libslic3r/PrintConfig.cpp:3335
+#: src/libslic3r/PrintConfig.cpp:3231
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode (and after any toolchange to this filament in case of multi-material "
@@ -11778,63 +11549,63 @@ msgid ""
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3351 src/libslic3r/PrintConfig.cpp:3352
+#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3248
 msgid "Model rounding precision"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3354
+#: src/libslic3r/PrintConfig.cpp:3250
 msgid ""
 "This is the rounding error of the input object. It's used to align points "
 "that should be in the same line. Put 0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3363
+#: src/libslic3r/PrintConfig.cpp:3259
 msgid "Color change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3364
+#: src/libslic3r/PrintConfig.cpp:3260
 msgid "This G-code will be used as a code for the color change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3372
+#: src/libslic3r/PrintConfig.cpp:3268
 msgid "Pause Print G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3373
+#: src/libslic3r/PrintConfig.cpp:3269
 msgid "This G-code will be used as a code for the pause print"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3381
+#: src/libslic3r/PrintConfig.cpp:3277
 msgid "Custom G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3382
+#: src/libslic3r/PrintConfig.cpp:3278
 msgid "This G-code will be used as a custom code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3390
+#: src/libslic3r/PrintConfig.cpp:3286
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3392
+#: src/libslic3r/PrintConfig.cpp:3287
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3397
+#: src/libslic3r/PrintConfig.cpp:3292
 msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3399
+#: src/libslic3r/PrintConfig.cpp:3293
 msgid ""
 "If enabled, all printing extruders will be primed at the front edge of the "
 "print bed at the start of the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3404
+#: src/libslic3r/PrintConfig.cpp:3298
 msgid "No sparse layers (EXPERIMENTAL)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3406
+#: src/libslic3r/PrintConfig.cpp:3299
 msgid ""
 "If enabled, the wipe tower will not be printed on layers with no "
 "toolchanges. On layers with a toolchange, extruder will travel downward to "
@@ -11842,56 +11613,56 @@ msgid ""
 "with the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3413
+#: src/libslic3r/PrintConfig.cpp:3306
 msgid "Generate support material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3415
+#: src/libslic3r/PrintConfig.cpp:3308
 msgid "Enable support material generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3419
+#: src/libslic3r/PrintConfig.cpp:3312
 msgid "Auto generated supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3421
+#: src/libslic3r/PrintConfig.cpp:3314
 msgid ""
 "If checked, supports will be generated automatically based on the overhang "
 "threshold value. If unchecked, supports will be generated inside the "
 "\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3427
+#: src/libslic3r/PrintConfig.cpp:3320
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3429
+#: src/libslic3r/PrintConfig.cpp:3322
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3439
+#: src/libslic3r/PrintConfig.cpp:3332
 msgid "Pattern angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3442
+#: src/libslic3r/PrintConfig.cpp:3335
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3452 src/libslic3r/PrintConfig.cpp:4684
+#: src/libslic3r/PrintConfig.cpp:3345 src/libslic3r/PrintConfig.cpp:4577
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3457
+#: src/libslic3r/PrintConfig.cpp:3350
 msgid "Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3460
+#: src/libslic3r/PrintConfig.cpp:3353
 msgid ""
 "How to compute the vertical z-distance.\n"
 "From filament: it use the nearest bit of the filament. When a bridge is "
@@ -11901,7 +11672,7 @@ msgid ""
 "None: No z-offset. Useful for Soluble supports.\n"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3478
+#: src/libslic3r/PrintConfig.cpp:3371
 #, possible-c-format
 msgid ""
 "The vertical distance between support material interface and the object(when "
@@ -11910,7 +11681,7 @@ msgid ""
 "Can be a % of the extruding width used for the interface layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3493
+#: src/libslic3r/PrintConfig.cpp:3386
 #, possible-c-format
 msgid ""
 "The vertical distance between object and support material interface(when the "
@@ -11918,11 +11689,11 @@ msgid ""
 "used for the interface layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3502
+#: src/libslic3r/PrintConfig.cpp:3395
 msgid "Enforce support for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3504
+#: src/libslic3r/PrintConfig.cpp:3397
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -11930,25 +11701,25 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3509
+#: src/libslic3r/PrintConfig.cpp:3402
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3515
+#: src/libslic3r/PrintConfig.cpp:3408
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3517
+#: src/libslic3r/PrintConfig.cpp:3410
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3525
+#: src/libslic3r/PrintConfig.cpp:3418
 msgid "Support material width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3527
+#: src/libslic3r/PrintConfig.cpp:3420
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -11956,109 +11727,109 @@ msgid ""
 "example 110%) it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3537
+#: src/libslic3r/PrintConfig.cpp:3430
 msgid "Interface loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3539
+#: src/libslic3r/PrintConfig.cpp:3432
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3544
+#: src/libslic3r/PrintConfig.cpp:3437
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3546
+#: src/libslic3r/PrintConfig.cpp:3439
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3553
+#: src/libslic3r/PrintConfig.cpp:3446
 msgid "Interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3555
+#: src/libslic3r/PrintConfig.cpp:3448
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3562
+#: src/libslic3r/PrintConfig.cpp:3455
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3564
+#: src/libslic3r/PrintConfig.cpp:3457
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3571
+#: src/libslic3r/PrintConfig.cpp:3464
 msgid "Interface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3572
+#: src/libslic3r/PrintConfig.cpp:3465
 msgid "Support interface speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3574
+#: src/libslic3r/PrintConfig.cpp:3467
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3584
+#: src/libslic3r/PrintConfig.cpp:3477
 msgid "Support pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3586
+#: src/libslic3r/PrintConfig.cpp:3479
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3592
+#: src/libslic3r/PrintConfig.cpp:3485
 msgid "Rectilinear grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3599
+#: src/libslic3r/PrintConfig.cpp:3492
 msgid "Support interface pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3601
+#: src/libslic3r/PrintConfig.cpp:3494
 msgid "Pattern for interface layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3621
+#: src/libslic3r/PrintConfig.cpp:3514
 msgid "Pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3623
+#: src/libslic3r/PrintConfig.cpp:3516
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3631
+#: src/libslic3r/PrintConfig.cpp:3524
 msgid "Support speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3633
+#: src/libslic3r/PrintConfig.cpp:3526
 msgid "Speed for printing support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3640
+#: src/libslic3r/PrintConfig.cpp:3533
 msgid "Synchronize with object layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3642
+#: src/libslic3r/PrintConfig.cpp:3535
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3648
+#: src/libslic3r/PrintConfig.cpp:3541
 msgid "Overhang threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3650
+#: src/libslic3r/PrintConfig.cpp:3543
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -12067,67 +11838,67 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3662
+#: src/libslic3r/PrintConfig.cpp:3555
 msgid "With sheath around the support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3664
+#: src/libslic3r/PrintConfig.cpp:3557
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3673
+#: src/libslic3r/PrintConfig.cpp:3566
 msgid ""
 "Extruder nozzle temperature for layers after the first one. Set this to zero "
 "to disable temperature control commands in the output G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3676
+#: src/libslic3r/PrintConfig.cpp:3569
 msgid "Nozzle temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3684
+#: src/libslic3r/PrintConfig.cpp:3577
 msgid ""
 "Override the temperature of the extruder. Avoid doing too many changes, it "
 "won't stop for cooling/heating. 0 to disable. May only works on Height range "
 "modifiers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3689
+#: src/libslic3r/PrintConfig.cpp:3582
 msgid "Z-lift override"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3691
+#: src/libslic3r/PrintConfig.cpp:3584
 msgid ""
 "Set the new lift-z value for this override. 0 will disable the z-lift. -& to "
 "disable. May only works on Height range modifiers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3697 src/libslic3r/PrintConfig.cpp:3698
+#: src/libslic3r/PrintConfig.cpp:3590 src/libslic3r/PrintConfig.cpp:3591
 msgid "Overlapping external perimeter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3700
+#: src/libslic3r/PrintConfig.cpp:3593
 msgid ""
 "Allow outermost perimeter to overlap itself to avoid the use of thin walls. "
 "Note that their flow isn't adjusted and so it will result in over-extruding "
 "and undefined behavior."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3705 src/libslic3r/PrintConfig.cpp:3706
+#: src/libslic3r/PrintConfig.cpp:3598 src/libslic3r/PrintConfig.cpp:3599
 msgid "Overlapping all perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3708
+#: src/libslic3r/PrintConfig.cpp:3601
 msgid "Allow all perimeters to overlap, instead of just external ones."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3714 src/libslic3r/PrintConfig.cpp:3754
+#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3647
 msgid "Thin walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3716
+#: src/libslic3r/PrintConfig.cpp:3609
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace). If unchecked, slic3r may try to fit "
@@ -12135,15 +11906,15 @@ msgid ""
 "extrusion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3723
+#: src/libslic3r/PrintConfig.cpp:3616
 msgid "Min width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3724
+#: src/libslic3r/PrintConfig.cpp:3617
 msgid "Thin walls min width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3726
+#: src/libslic3r/PrintConfig.cpp:3619
 msgid ""
 "Minimum width for the extrusion to be extruded (widths lower than the nozzle "
 "diameter will be over-extruded at the nozzle diameter). If expressed as "
@@ -12152,60 +11923,60 @@ msgid ""
 "avoid any sort of over-extrusion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3735
+#: src/libslic3r/PrintConfig.cpp:3628
 msgid "Overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3736
+#: src/libslic3r/PrintConfig.cpp:3629
 msgid "Thin wall overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3738
+#: src/libslic3r/PrintConfig.cpp:3631
 msgid ""
 "Overlap between the thin wall and the perimeters. Can be a % of the external "
 "perimeter width (default 50%)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3745
+#: src/libslic3r/PrintConfig.cpp:3638
 msgid "Merging with perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3746
+#: src/libslic3r/PrintConfig.cpp:3639
 msgid "Thin wall merge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3748
+#: src/libslic3r/PrintConfig.cpp:3641
 msgid ""
 "Allow the external perimeter to merge the thin walls in the path. You can "
 "deactivate it if you use thin walls as a custom support, to reduce adhesion "
 "a little bit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3755
+#: src/libslic3r/PrintConfig.cpp:3648
 msgid "Thin walls speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3757
+#: src/libslic3r/PrintConfig.cpp:3650
 msgid ""
 "Speed for thin wall (external extrusion that are alone because the obect is "
 "too thin at these places)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3764
+#: src/libslic3r/PrintConfig.cpp:3657
 msgid "Threads"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3765
+#: src/libslic3r/PrintConfig.cpp:3658
 msgid ""
 "Threads are used to parallelize long-running tasks. Optimal threads number "
 "is slightly above the number of available cores/processors."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3776
+#: src/libslic3r/PrintConfig.cpp:3669
 msgid "Time estimation compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3778
+#: src/libslic3r/PrintConfig.cpp:3671
 #, possible-c-format
 msgid ""
 "This setting allow you to modify the time estiamtion by a % amount. As "
@@ -12213,11 +11984,11 @@ msgid ""
 "firmware is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3785
+#: src/libslic3r/PrintConfig.cpp:3678
 msgid "Tool change G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3787
+#: src/libslic3r/PrintConfig.cpp:3680
 msgid ""
 "This custom code is inserted at every extruder change. If you don't leave "
 "this empty, you are expected to take care of the toolchange yourself - "
@@ -12227,17 +11998,17 @@ msgid ""
 "as T[next_extruder]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3798
+#: src/libslic3r/PrintConfig.cpp:3691
 msgid "Tool name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3800
+#: src/libslic3r/PrintConfig.cpp:3693
 msgid ""
 "Only used for klipper, where you can name the extruder. If not set, will be "
 "'extruderX' with 'X' replaced by the extruder number."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3807
+#: src/libslic3r/PrintConfig.cpp:3700
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -12246,79 +12017,79 @@ msgid ""
 "percentage (for example 110%) it will be computed over nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3818
+#: src/libslic3r/PrintConfig.cpp:3711
 msgid "Top solid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3819
+#: src/libslic3r/PrintConfig.cpp:3712
 msgid "Top solid speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3821
+#: src/libslic3r/PrintConfig.cpp:3714
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
 "slow down this to get a nicer surface finish. This can be expressed as a "
 "percentage (for example: 80%) over the solid infill speed above. Set to zero "
 "for auto."
-msgstr ""
+msgstr "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. הגדר 0 עבור אוטומטי."
 
-#: src/libslic3r/PrintConfig.cpp:3835
+#: src/libslic3r/PrintConfig.cpp:3728
 msgid "Top layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3837
+#: src/libslic3r/PrintConfig.cpp:3730
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3838
+#: src/libslic3r/PrintConfig.cpp:3731
 msgid "Top solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3846
+#: src/libslic3r/PrintConfig.cpp:3739
 msgid ""
 "The number of top solid layers is increased above top_solid_layers if "
 "necessary to satisfy minimum thickness of top shell. This is useful to "
 "prevent pillowing effect when printing with variable layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3849
+#: src/libslic3r/PrintConfig.cpp:3742
 msgid "Minimum top shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3856
+#: src/libslic3r/PrintConfig.cpp:3749
 msgid "Travel speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3858
+#: src/libslic3r/PrintConfig.cpp:3751
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3866
+#: src/libslic3r/PrintConfig.cpp:3759
 msgid "Use firmware retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3868
+#: src/libslic3r/PrintConfig.cpp:3761
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3874
+#: src/libslic3r/PrintConfig.cpp:3767
 msgid "Use relative E distances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3876
+#: src/libslic3r/PrintConfig.cpp:3769
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3882
+#: src/libslic3r/PrintConfig.cpp:3775
 msgid "Use volumetric E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3884
+#: src/libslic3r/PrintConfig.cpp:3777
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -12328,110 +12099,110 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3894
+#: src/libslic3r/PrintConfig.cpp:3787
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3896
+#: src/libslic3r/PrintConfig.cpp:3789
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3902
+#: src/libslic3r/PrintConfig.cpp:3795
 msgid "Wipe while retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3904
+#: src/libslic3r/PrintConfig.cpp:3797
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3911
+#: src/libslic3r/PrintConfig.cpp:3804
 msgid "Enable wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3913
+#: src/libslic3r/PrintConfig.cpp:3806
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3919
+#: src/libslic3r/PrintConfig.cpp:3812
 msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3920
+#: src/libslic3r/PrintConfig.cpp:3813
 msgid ""
 "This vector saves required volumes to change from/to each tool used on the "
 "wipe tower. These values are used to simplify creation of the full purging "
 "volumes below. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3926
+#: src/libslic3r/PrintConfig.cpp:3819
 msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3927
+#: src/libslic3r/PrintConfig.cpp:3820
 msgid ""
 "This matrix describes volumes (in cubic milimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3937
+#: src/libslic3r/PrintConfig.cpp:3830
 msgid "Enable advanced wiping volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3938
+#: src/libslic3r/PrintConfig.cpp:3831
 #, possible-c-format
 msgid ""
 "Allow slic3r to compute the purge volume via smart computations. Use the "
 "pigment% of each filament and following parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3943
+#: src/libslic3r/PrintConfig.cpp:3836
 msgid "Nozzle volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3944
+#: src/libslic3r/PrintConfig.cpp:3837
 msgid ""
 "The volume of melted plastic inside your nozlle. Used by 'advanced wiping'."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3945 src/libslic3r/PrintConfig.cpp:3961
+#: src/libslic3r/PrintConfig.cpp:3838 src/libslic3r/PrintConfig.cpp:3854
 msgid "mm3"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3950
+#: src/libslic3r/PrintConfig.cpp:3843
 msgid "Pigment percentage"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3951
+#: src/libslic3r/PrintConfig.cpp:3844
 msgid ""
 "The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/"
 "natural, 0.2-0.5 for white and 1 for black."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3958
+#: src/libslic3r/PrintConfig.cpp:3851
 msgid "Multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3959
+#: src/libslic3r/PrintConfig.cpp:3852
 msgid "Auto-wipe multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3960
+#: src/libslic3r/PrintConfig.cpp:3853
 msgid ""
 "The volume multiplier used to compute the final volume to extrude by the "
 "algorithm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3968
+#: src/libslic3r/PrintConfig.cpp:3861
 msgid "Auto-wipe algorithm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3969
+#: src/libslic3r/PrintConfig.cpp:3862
 msgid ""
 "Algo for the advanced wipe.\n"
 "Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n"
@@ -12441,119 +12212,119 @@ msgid ""
 "+pigmentAfter)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3977
+#: src/libslic3r/PrintConfig.cpp:3870
 msgid "Linear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3978
+#: src/libslic3r/PrintConfig.cpp:3871
 msgid "Quadratric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3979
+#: src/libslic3r/PrintConfig.cpp:3872
 msgid "Hyperbola"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3984
+#: src/libslic3r/PrintConfig.cpp:3877
 msgid "Wipe tower brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3985
+#: src/libslic3r/PrintConfig.cpp:3878
 #, possible-c-format
 msgid ""
 "Width of the brim for the wipe tower. Can be in mm of in % of the (assumed) "
 "only one nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3991
+#: src/libslic3r/PrintConfig.cpp:3884
 msgid "X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3992
+#: src/libslic3r/PrintConfig.cpp:3885
 msgid "Wipe tower X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3993
+#: src/libslic3r/PrintConfig.cpp:3886
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3999
+#: src/libslic3r/PrintConfig.cpp:3892
 msgid "Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4000
+#: src/libslic3r/PrintConfig.cpp:3893
 msgid "Wipe tower Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4001
+#: src/libslic3r/PrintConfig.cpp:3894
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4008
+#: src/libslic3r/PrintConfig.cpp:3901
 msgid "Wipe tower Width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4009
+#: src/libslic3r/PrintConfig.cpp:3902
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4015
+#: src/libslic3r/PrintConfig.cpp:3908
 msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4016
+#: src/libslic3r/PrintConfig.cpp:3909
 msgid "Wipe tower rotation angle with respect to x-axis."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4023
+#: src/libslic3r/PrintConfig.cpp:3916
 msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4024
+#: src/libslic3r/PrintConfig.cpp:3917
 msgid ""
 "Purging after toolchange will done inside this object's infills. This lowers "
 "the amount of waste but may result in longer print time  due to additional "
 "travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4031
+#: src/libslic3r/PrintConfig.cpp:3924
 msgid "Wipe into this object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4032
+#: src/libslic3r/PrintConfig.cpp:3925
 msgid ""
 "Object will be used to purge the nozzle after a toolchange to save material "
 "that would otherwise end up in the wipe tower and decrease print time. "
 "Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4039
+#: src/libslic3r/PrintConfig.cpp:3932
 msgid "Extra Wipe for external perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4040
+#: src/libslic3r/PrintConfig.cpp:3933
 msgid ""
 "When the external perimeter loop extrusion end, a wipe is done, going a bit "
 "inside the print. The number put in this setting increase the wipe by moving "
 "the nozzle again along the loop before the final wipe."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4048
+#: src/libslic3r/PrintConfig.cpp:3941
 msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4049
+#: src/libslic3r/PrintConfig.cpp:3942
 msgid "Maximal distance between supports on sparse infill sections. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4055
+#: src/libslic3r/PrintConfig.cpp:3948
 msgid "Outer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4056
+#: src/libslic3r/PrintConfig.cpp:3949
 msgid "Outer XY size compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4058
+#: src/libslic3r/PrintConfig.cpp:3951
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
@@ -12561,17 +12332,19 @@ msgid ""
 "This one only applies to the 'exterior' shell of the object.\n"
 " !!! it's recommended you put the same value into the 'Inner XY size "
 "compensation', unless you are sure you don't have horizontal holes. !!! "
-msgstr ""
+msgstr "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\n"
+"This one only applies to the 'exterior' shell of the object.\n"
+" !!! it's recommended you put the same value into the 'Inner XY size compensation', unless you are sure you don't have horizontal holes. !!! "
 
-#: src/libslic3r/PrintConfig.cpp:4067
+#: src/libslic3r/PrintConfig.cpp:3960
 msgid "Inner"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4068
+#: src/libslic3r/PrintConfig.cpp:3961
 msgid "Inner XY size compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4070
+#: src/libslic3r/PrintConfig.cpp:3963
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
@@ -12580,15 +12353,15 @@ msgid ""
 "holes break the shell !!!)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4078
-msgid "XY compensation"
+#: src/libslic3r/PrintConfig.cpp:3971 src/libslic3r/PrintConfig.cpp:3983
+msgid "Holes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4079
+#: src/libslic3r/PrintConfig.cpp:3972
 msgid "XY holes compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4081
+#: src/libslic3r/PrintConfig.cpp:3974
 msgid ""
 "The convex holes will be grown / shrunk in the XY plane by the configured "
 "value (negative = inwards, positive = outwards, should be negative as the "
@@ -12599,26 +12372,22 @@ msgid ""
 "replace it. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4090
-msgid "Threshold"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4091
+#: src/libslic3r/PrintConfig.cpp:3984
 msgid "XY holes threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4093
+#: src/libslic3r/PrintConfig.cpp:3986
 msgid ""
 "Maximum area for the hole where the hole_size_compensation will apply fully. "
 "After that, it will decraese down to 0 for four time this area. Set to 0 to "
 "let the hole_size_compensation apply fully for all detected holes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4101 src/libslic3r/PrintConfig.cpp:4102
+#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:3995
 msgid "Convert round holes to polyholes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4104
+#: src/libslic3r/PrintConfig.cpp:3997
 msgid ""
 "Search for almost-circular holes that span more than one layer and convert "
 "the geometry to polyholes. Use the nozzle size and the (biggest) diameter to "
@@ -12626,11 +12395,11 @@ msgid ""
 "See http://hydraraptor.blogspot.com/2011/02/polyholes.html"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4111
+#: src/libslic3r/PrintConfig.cpp:4004
 msgid "Z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4113
+#: src/libslic3r/PrintConfig.cpp:4006
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -12638,11 +12407,11 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4122
+#: src/libslic3r/PrintConfig.cpp:4015
 msgid "Z full step"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4123
+#: src/libslic3r/PrintConfig.cpp:4016
 msgid ""
 "Set this to the height moved when your Z motor (or equivalent) turns one "
 "step.If your motor needs 200 steps to move your head/plater by 1mm, this "
@@ -12652,49 +12421,49 @@ msgid ""
 "Put 0 to disable."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4226
+#: src/libslic3r/PrintConfig.cpp:4119
 msgid "Milling cutter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4228
+#: src/libslic3r/PrintConfig.cpp:4121
 msgid ""
 "The milling cutter to use (unless more specific extruder settings are "
 "specified). "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4242
+#: src/libslic3r/PrintConfig.cpp:4135
 msgid "Milling diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4244
+#: src/libslic3r/PrintConfig.cpp:4137
 msgid "This is the diameter of your cutting tool."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4250
+#: src/libslic3r/PrintConfig.cpp:4143
 msgid "Tool offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4261
+#: src/libslic3r/PrintConfig.cpp:4154
 msgid "Tool z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4263
+#: src/libslic3r/PrintConfig.cpp:4156
 msgid "."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4269
+#: src/libslic3r/PrintConfig.cpp:4162
 msgid "Tool z lift"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4271
+#: src/libslic3r/PrintConfig.cpp:4164
 msgid "Amount of lift for travel."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4277
+#: src/libslic3r/PrintConfig.cpp:4170
 msgid "G-Code to switch to this toolhead"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4279
+#: src/libslic3r/PrintConfig.cpp:4172
 msgid ""
 "Put here the gcode to change the toolhead (called after the g-code T"
 "[next_extruder]). You have access to [next_extruder] and "
@@ -12706,11 +12475,11 @@ msgid ""
 "of milling tool is available at [milling_cutter]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4287
+#: src/libslic3r/PrintConfig.cpp:4180
 msgid "G-Code to switch from this toolhead"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4289
+#: src/libslic3r/PrintConfig.cpp:4182
 msgid ""
 "Put here the gcode to end the toolhead action, like stopping the spindle. "
 "You have access to [next_extruder] and [previous_extruder]. "
@@ -12722,11 +12491,11 @@ msgid ""
 "available at [milling_cutter]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4297
+#: src/libslic3r/PrintConfig.cpp:4190
 msgid "Milling post-processing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4299
+#: src/libslic3r/PrintConfig.cpp:4192
 msgid ""
 "If activated, at the end of each layer, the printer will switch to a milling "
 "head and mill the external perimeters.\n"
@@ -12735,22 +12504,22 @@ msgid ""
 "bed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4305
+#: src/libslic3r/PrintConfig.cpp:4198
 msgid "Milling extra XY size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4307
+#: src/libslic3r/PrintConfig.cpp:4200
 msgid ""
 "This increase the size of the object by a certain amount to have enough "
 "plastic to mill. You can set a number of mm or a percentage of the "
 "calculated optimal extra width (from flow calculation)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4315
+#: src/libslic3r/PrintConfig.cpp:4208
 msgid "Milling only after"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4317
+#: src/libslic3r/PrintConfig.cpp:4210
 #, possible-c-format
 msgid ""
 "This setting restrict the post-process milling to a certain height, to avoid "
@@ -12758,424 +12527,423 @@ msgid ""
 "depends of the object)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4324
+#: src/libslic3r/PrintConfig.cpp:4217
 msgid "Milling Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4326
+#: src/libslic3r/PrintConfig.cpp:4219
 msgid "Speed for milling tool."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4340
+#: src/libslic3r/PrintConfig.cpp:4233
 msgid "Display width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4341
+#: src/libslic3r/PrintConfig.cpp:4234
 msgid "Width of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4346
+#: src/libslic3r/PrintConfig.cpp:4239
 msgid "Display height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4347
+#: src/libslic3r/PrintConfig.cpp:4240
 msgid "Height of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4352
+#: src/libslic3r/PrintConfig.cpp:4245
 msgid "Number of pixels in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4354
+#: src/libslic3r/PrintConfig.cpp:4247
 msgid "Number of pixels in X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4360
+#: src/libslic3r/PrintConfig.cpp:4253
 msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4365
+#: src/libslic3r/PrintConfig.cpp:4258
 msgid "Display horizontal mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4366
+#: src/libslic3r/PrintConfig.cpp:4259
 msgid "Mirror horizontally"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4367
+#: src/libslic3r/PrintConfig.cpp:4260
 msgid "Enable horizontal mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4372
+#: src/libslic3r/PrintConfig.cpp:4265
 msgid "Display vertical mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4373
+#: src/libslic3r/PrintConfig.cpp:4266
 msgid "Mirror vertically"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4374
+#: src/libslic3r/PrintConfig.cpp:4267
 msgid "Enable vertical mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4379
+#: src/libslic3r/PrintConfig.cpp:4272
 msgid "Display orientation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4380
+#: src/libslic3r/PrintConfig.cpp:4273
 msgid ""
 "Set the actual LCD display orientation inside the SLA printer. Portrait mode "
 "will flip the meaning of display width and height parameters and the output "
 "images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4386
+#: src/libslic3r/PrintConfig.cpp:4279
 msgid "Landscape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4387
+#: src/libslic3r/PrintConfig.cpp:4280
 msgid "Portrait"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4392
+#: src/libslic3r/PrintConfig.cpp:4285
 msgid "Fast"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4393
+#: src/libslic3r/PrintConfig.cpp:4286
 msgid "Fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4394
+#: src/libslic3r/PrintConfig.cpp:4287
 msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4401
+#: src/libslic3r/PrintConfig.cpp:4294
 msgid "Slow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4402
+#: src/libslic3r/PrintConfig.cpp:4295
 msgid "Slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4403
+#: src/libslic3r/PrintConfig.cpp:4296
 msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4410
+#: src/libslic3r/PrintConfig.cpp:4303
 msgid "Area fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4411
+#: src/libslic3r/PrintConfig.cpp:4304
 msgid ""
 "The percentage of the bed area. \n"
 "If the print area exceeds the specified value, \n"
 "then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4418 src/libslic3r/PrintConfig.cpp:4419
-#: src/libslic3r/PrintConfig.cpp:4420
+#: src/libslic3r/PrintConfig.cpp:4311 src/libslic3r/PrintConfig.cpp:4312
+#: src/libslic3r/PrintConfig.cpp:4313
 msgid "Printer scaling correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4426 src/libslic3r/PrintConfig.cpp:4427
+#: src/libslic3r/PrintConfig.cpp:4319 src/libslic3r/PrintConfig.cpp:4320
 msgid "Printer absolute correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4428
+#: src/libslic3r/PrintConfig.cpp:4321
 msgid ""
 "Will inflate or deflate the sliced 2D polygons according to the sign of the "
 "correction."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4434
-msgid "minimum width"
+#: src/libslic3r/PrintConfig.cpp:4327
+msgid "Elephant foot minimum width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4436
+#: src/libslic3r/PrintConfig.cpp:4329
 msgid ""
-"Minimum width of features to maintain when doing the first layer "
-"compensation."
+"Minimum width of features to maintain when doing elephant foot compensation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4443 src/libslic3r/PrintConfig.cpp:4444
+#: src/libslic3r/PrintConfig.cpp:4336 src/libslic3r/PrintConfig.cpp:4337
 msgid "Printer gamma correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4445
+#: src/libslic3r/PrintConfig.cpp:4338
 msgid ""
 "This will apply a gamma correction to the rasterized 2D polygons. A gamma "
 "value of zero means thresholding with the threshold in the middle. This "
 "behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4457 src/libslic3r/PrintConfig.cpp:4458
+#: src/libslic3r/PrintConfig.cpp:4350 src/libslic3r/PrintConfig.cpp:4351
 msgid "SLA material type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4469 src/libslic3r/PrintConfig.cpp:4470
+#: src/libslic3r/PrintConfig.cpp:4362 src/libslic3r/PrintConfig.cpp:4363
 msgid "Initial layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4476 src/libslic3r/PrintConfig.cpp:4477
+#: src/libslic3r/PrintConfig.cpp:4369 src/libslic3r/PrintConfig.cpp:4370
 msgid "Bottle volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4478
+#: src/libslic3r/PrintConfig.cpp:4371
 msgid "ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4483 src/libslic3r/PrintConfig.cpp:4484
+#: src/libslic3r/PrintConfig.cpp:4376 src/libslic3r/PrintConfig.cpp:4377
 msgid "Bottle weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4485
+#: src/libslic3r/PrintConfig.cpp:4378
 msgid "kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4492
+#: src/libslic3r/PrintConfig.cpp:4385
 msgid "g/ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4499
+#: src/libslic3r/PrintConfig.cpp:4392
 msgid "money/bottle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4504
+#: src/libslic3r/PrintConfig.cpp:4397
 msgid "Faded layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4505
+#: src/libslic3r/PrintConfig.cpp:4398
 msgid ""
 "Number of the layers needed for the exposure time fade from initial exposure "
 "time to the exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4512 src/libslic3r/PrintConfig.cpp:4513
+#: src/libslic3r/PrintConfig.cpp:4405 src/libslic3r/PrintConfig.cpp:4406
 msgid "Minimum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4520 src/libslic3r/PrintConfig.cpp:4521
+#: src/libslic3r/PrintConfig.cpp:4413 src/libslic3r/PrintConfig.cpp:4414
 msgid "Maximum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4528 src/libslic3r/PrintConfig.cpp:4529
+#: src/libslic3r/PrintConfig.cpp:4421 src/libslic3r/PrintConfig.cpp:4422
 msgid "Exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4535 src/libslic3r/PrintConfig.cpp:4536
+#: src/libslic3r/PrintConfig.cpp:4428 src/libslic3r/PrintConfig.cpp:4429
 msgid "Minimum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4543 src/libslic3r/PrintConfig.cpp:4544
+#: src/libslic3r/PrintConfig.cpp:4436 src/libslic3r/PrintConfig.cpp:4437
 msgid "Maximum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4551 src/libslic3r/PrintConfig.cpp:4552
+#: src/libslic3r/PrintConfig.cpp:4444 src/libslic3r/PrintConfig.cpp:4445
 msgid "Initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4558 src/libslic3r/PrintConfig.cpp:4559
+#: src/libslic3r/PrintConfig.cpp:4451 src/libslic3r/PrintConfig.cpp:4452
 msgid "Correction for expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4565
+#: src/libslic3r/PrintConfig.cpp:4458
 msgid "SLA print material notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4566
+#: src/libslic3r/PrintConfig.cpp:4459
 msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4578 src/libslic3r/PrintConfig.cpp:4589
+#: src/libslic3r/PrintConfig.cpp:4471 src/libslic3r/PrintConfig.cpp:4482
 msgid "Default SLA material profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4600
+#: src/libslic3r/PrintConfig.cpp:4493
 msgid "Generate supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4602
+#: src/libslic3r/PrintConfig.cpp:4495
 msgid "Generate supports for the models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4607
+#: src/libslic3r/PrintConfig.cpp:4500
 msgid "Pinhead front diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4609
+#: src/libslic3r/PrintConfig.cpp:4502
 msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4616
+#: src/libslic3r/PrintConfig.cpp:4509
 msgid "Head penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4618
+#: src/libslic3r/PrintConfig.cpp:4511
 msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4625
+#: src/libslic3r/PrintConfig.cpp:4518
 msgid "Pinhead width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4627
+#: src/libslic3r/PrintConfig.cpp:4520
 msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4635
+#: src/libslic3r/PrintConfig.cpp:4528
 msgid "Pillar diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4637
+#: src/libslic3r/PrintConfig.cpp:4530
 msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4645
+#: src/libslic3r/PrintConfig.cpp:4538
 msgid "Small pillar diameter percent"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4647
+#: src/libslic3r/PrintConfig.cpp:4540
 msgid ""
 "The percentage of smaller pillars compared to the normal pillar diameter "
 "which are used in problematic areas where a normal pilla cannot fit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4656
+#: src/libslic3r/PrintConfig.cpp:4549
 msgid "Max bridges on a pillar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4658
+#: src/libslic3r/PrintConfig.cpp:4551
 msgid ""
 "Maximum number of bridges that can be placed on a pillar. Bridges hold "
 "support point pinheads and connect to pillars as small branches."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4666
+#: src/libslic3r/PrintConfig.cpp:4559
 msgid "Pillar connection mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4667
+#: src/libslic3r/PrintConfig.cpp:4560
 msgid ""
 "Controls the bridge type between two neighboring pillars. Can be zig-zag, "
 "cross (double zig-zag) or dynamic which will automatically switch between "
 "the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4675
+#: src/libslic3r/PrintConfig.cpp:4568
 msgid "Zig-Zag"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4676
+#: src/libslic3r/PrintConfig.cpp:4569
 msgid "Cross"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4677
+#: src/libslic3r/PrintConfig.cpp:4570
 msgid "Dynamic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4689
+#: src/libslic3r/PrintConfig.cpp:4582
 msgid "Pillar widening factor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4691
+#: src/libslic3r/PrintConfig.cpp:4584
 msgid ""
 "Merging bridges or pillars into another pillars can increase the radius. "
 "Zero means no increase, one means full increase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4700
+#: src/libslic3r/PrintConfig.cpp:4593
 msgid "Support base diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4702
+#: src/libslic3r/PrintConfig.cpp:4595
 msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4710
+#: src/libslic3r/PrintConfig.cpp:4603
 msgid "Support base height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4712
+#: src/libslic3r/PrintConfig.cpp:4605
 msgid "The height of the pillar base cone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4719
+#: src/libslic3r/PrintConfig.cpp:4612
 msgid "Support base safety distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4722
+#: src/libslic3r/PrintConfig.cpp:4615
 msgid ""
 "The minimum distance of the pillar base from the model in mm. Makes sense in "
 "zero elevation mode where a gap according to this parameter is inserted "
 "between the model and the pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4732
+#: src/libslic3r/PrintConfig.cpp:4625
 msgid "Critical angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4734
+#: src/libslic3r/PrintConfig.cpp:4627
 msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4742
+#: src/libslic3r/PrintConfig.cpp:4635
 msgid "Max bridge length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4744
+#: src/libslic3r/PrintConfig.cpp:4637
 msgid "The max length of a bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4751
+#: src/libslic3r/PrintConfig.cpp:4644
 msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4753
+#: src/libslic3r/PrintConfig.cpp:4646
 msgid ""
 "The max distance of two pillars to get linked with each other. A zero value "
 "will prohibit pillar cascading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4763
+#: src/libslic3r/PrintConfig.cpp:4656
 msgid ""
 "How much the supports should lift up the supported object. If this value is "
 "zero, the bottom of the model geometry will be considered as part of the pad."
 "If \"Pad around object\" is enabled, this value is ignored."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4776
+#: src/libslic3r/PrintConfig.cpp:4669
 msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4782
+#: src/libslic3r/PrintConfig.cpp:4675
 msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4784
+#: src/libslic3r/PrintConfig.cpp:4677
 msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4790
+#: src/libslic3r/PrintConfig.cpp:4683
 msgid "Use pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4792
+#: src/libslic3r/PrintConfig.cpp:4685
 msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4797
+#: src/libslic3r/PrintConfig.cpp:4690
 msgid "Pad wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4799
+#: src/libslic3r/PrintConfig.cpp:4692
 msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4807
+#: src/libslic3r/PrintConfig.cpp:4700
 msgid "Pad wall height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4808
+#: src/libslic3r/PrintConfig.cpp:4701
 msgid ""
 "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
 "when enabling this feature, as some resins may produce an extreme suction "
@@ -13183,111 +12951,111 @@ msgid ""
 "difficult."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4821
+#: src/libslic3r/PrintConfig.cpp:4714
 msgid "Pad brim size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4822
+#: src/libslic3r/PrintConfig.cpp:4715
 msgid "How far should the pad extend around the contained geometry"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4832
+#: src/libslic3r/PrintConfig.cpp:4725
 msgid "Max merge distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4834
+#: src/libslic3r/PrintConfig.cpp:4727
 msgid ""
 "Some objects can get along with a few smaller pads instead of a single big "
 "one. This parameter defines how far the center of two smaller pads should "
 "be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4854
+#: src/libslic3r/PrintConfig.cpp:4747
 msgid "Pad wall slope"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4856
+#: src/libslic3r/PrintConfig.cpp:4749
 msgid ""
 "The slope of the pad wall relative to the bed plane. 90 degrees means "
 "straight walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4867
+#: src/libslic3r/PrintConfig.cpp:4760
 msgid "Create pad around object and ignore the support elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4872
+#: src/libslic3r/PrintConfig.cpp:4765
 msgid "Pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4874
+#: src/libslic3r/PrintConfig.cpp:4767
 msgid "Force pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4879
+#: src/libslic3r/PrintConfig.cpp:4772
 msgid "Pad object gap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4881
+#: src/libslic3r/PrintConfig.cpp:4774
 msgid ""
 "The gap between the object bottom and the generated pad in zero elevation "
 "mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4890
+#: src/libslic3r/PrintConfig.cpp:4783
 msgid "Pad object connector stride"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4892
+#: src/libslic3r/PrintConfig.cpp:4785
 msgid ""
 "Distance between two connector sticks which connect the object and the "
 "generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4899
+#: src/libslic3r/PrintConfig.cpp:4792
 msgid "Pad object connector width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4901
+#: src/libslic3r/PrintConfig.cpp:4794
 msgid ""
 "Width of the connector sticks which connect the object and the generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4908
+#: src/libslic3r/PrintConfig.cpp:4801
 msgid "Pad object connector penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4911
+#: src/libslic3r/PrintConfig.cpp:4804
 msgid "How much should the tiny connectors penetrate into the model body."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4918
+#: src/libslic3r/PrintConfig.cpp:4811
 msgid "Enable hollowing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4920
+#: src/libslic3r/PrintConfig.cpp:4813
 msgid "Hollow out a model to have an empty interior"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4925
+#: src/libslic3r/PrintConfig.cpp:4818
 msgid "Wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4927
+#: src/libslic3r/PrintConfig.cpp:4820
 msgid "Minimum wall thickness of a hollowed model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4935
+#: src/libslic3r/PrintConfig.cpp:4828
 msgid "Accuracy"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4937
+#: src/libslic3r/PrintConfig.cpp:4830
 msgid ""
 "Performance vs accuracy of calculation. Lower values may produce unwanted "
 "artifacts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4947
+#: src/libslic3r/PrintConfig.cpp:4840
 msgid ""
 "Hollowing is done in two steps: first, an imaginary interior is calculated "
 "deeper (offset plus the closing distance) in the object and then it's "
@@ -13296,266 +13064,266 @@ msgid ""
 "most."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5734
+#: src/libslic3r/PrintConfig.cpp:5626
 msgid "Export OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5735
+#: src/libslic3r/PrintConfig.cpp:5627
 msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5747
+#: src/libslic3r/PrintConfig.cpp:5639
 msgid "Export SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5748
+#: src/libslic3r/PrintConfig.cpp:5640
 msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5753
+#: src/libslic3r/PrintConfig.cpp:5645
 msgid "Export 3MF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5754
+#: src/libslic3r/PrintConfig.cpp:5646
 msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5758
+#: src/libslic3r/PrintConfig.cpp:5650
 msgid "Export AMF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5759
+#: src/libslic3r/PrintConfig.cpp:5651
 msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5763
+#: src/libslic3r/PrintConfig.cpp:5655
 msgid "Export STL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5764
+#: src/libslic3r/PrintConfig.cpp:5656
 msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5769
+#: src/libslic3r/PrintConfig.cpp:5661
 msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5774
+#: src/libslic3r/PrintConfig.cpp:5666
 msgid "G-code viewer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5775
+#: src/libslic3r/PrintConfig.cpp:5667
 msgid "Visualize an already sliced and saved G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5780
+#: src/libslic3r/PrintConfig.cpp:5672
 msgid "Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5781
+#: src/libslic3r/PrintConfig.cpp:5673
 msgid ""
 "Slice the model as FFF or SLA based on the printer_technology configuration "
 "value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5786
+#: src/libslic3r/PrintConfig.cpp:5678
 msgid "Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5787
+#: src/libslic3r/PrintConfig.cpp:5679
 msgid "Show this help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5792
+#: src/libslic3r/PrintConfig.cpp:5684
 msgid "Help (FFF options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5793
+#: src/libslic3r/PrintConfig.cpp:5685
 msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5797
+#: src/libslic3r/PrintConfig.cpp:5689
 msgid "Help (SLA options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5798
+#: src/libslic3r/PrintConfig.cpp:5690
 msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5802
+#: src/libslic3r/PrintConfig.cpp:5694
 msgid "Output Model Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5803
+#: src/libslic3r/PrintConfig.cpp:5695
 msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5807
+#: src/libslic3r/PrintConfig.cpp:5699
 msgid "Save config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5808
+#: src/libslic3r/PrintConfig.cpp:5700
 msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5818
+#: src/libslic3r/PrintConfig.cpp:5710
 msgid "Align XY"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5819
+#: src/libslic3r/PrintConfig.cpp:5711
 msgid "Align the model to the given point."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5824
+#: src/libslic3r/PrintConfig.cpp:5716
 msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5848
+#: src/libslic3r/PrintConfig.cpp:5740
 msgid "Center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5849
+#: src/libslic3r/PrintConfig.cpp:5741
 msgid "Center the print around the given center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5853
+#: src/libslic3r/PrintConfig.cpp:5745
 msgid "Don't arrange"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5854
+#: src/libslic3r/PrintConfig.cpp:5746
 msgid ""
 "Do not rearrange the given models before merging and keep their original XY "
 "coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5857
+#: src/libslic3r/PrintConfig.cpp:5749
 msgid "Duplicate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5858
+#: src/libslic3r/PrintConfig.cpp:5750
 msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5862
+#: src/libslic3r/PrintConfig.cpp:5754
 msgid "Duplicate by grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5863
+#: src/libslic3r/PrintConfig.cpp:5755
 msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5867
+#: src/libslic3r/PrintConfig.cpp:5759
 msgid ""
 "Arrange the supplied models in a plate and merge them in a single model in "
 "order to perform actions once."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5872
+#: src/libslic3r/PrintConfig.cpp:5764
 msgid ""
 "Try to repair any non-manifold meshes (this option is implicitly added "
 "whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5876
+#: src/libslic3r/PrintConfig.cpp:5768
 msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5880
+#: src/libslic3r/PrintConfig.cpp:5772
 msgid "Rotate around X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5881
+#: src/libslic3r/PrintConfig.cpp:5773
 msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5885
+#: src/libslic3r/PrintConfig.cpp:5777
 msgid "Rotate around Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5886
+#: src/libslic3r/PrintConfig.cpp:5778
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5891
+#: src/libslic3r/PrintConfig.cpp:5783
 msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5896
+#: src/libslic3r/PrintConfig.cpp:5788
 msgid ""
 "Detect unconnected parts in the given model(s) and split them into separate "
 "objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5899
+#: src/libslic3r/PrintConfig.cpp:5791
 msgid "Scale to Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5900
+#: src/libslic3r/PrintConfig.cpp:5792
 msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5909
+#: src/libslic3r/PrintConfig.cpp:5801
 msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5910
+#: src/libslic3r/PrintConfig.cpp:5802
 msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5913
+#: src/libslic3r/PrintConfig.cpp:5805
 msgid "Load config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5914
+#: src/libslic3r/PrintConfig.cpp:5806
 msgid ""
 "Load configuration from the specified file. It can be used more than once to "
 "load options from multiple files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5917
+#: src/libslic3r/PrintConfig.cpp:5809
 msgid "Output File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5918
+#: src/libslic3r/PrintConfig.cpp:5810
 msgid ""
 "The file where the output will be written (if not specified, it will be "
 "based on the input file)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5923
+#: src/libslic3r/PrintConfig.cpp:5815
 msgid ""
 "If enabled, the command line arguments are sent to an existing instance of "
 "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
 "the \"single_instance\" configuration value from application preferences."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5934
+#: src/libslic3r/PrintConfig.cpp:5826
 msgid "Data directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5935
+#: src/libslic3r/PrintConfig.cpp:5827
 msgid ""
 "Load and store settings at the given directory. This is useful for "
 "maintaining different profiles or including configurations from a network "
 "storage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5938
+#: src/libslic3r/PrintConfig.cpp:5830
 msgid "Logging level"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5939
+#: src/libslic3r/PrintConfig.cpp:5831
 msgid ""
 "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
 "trace\n"
 "For example. loglevel=2 logs fatal, error and warning level messages."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5945
+#: src/libslic3r/PrintConfig.cpp:5837
 msgid "Render with a software renderer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:5946
+#: src/libslic3r/PrintConfig.cpp:5838
 msgid ""
 "Render with a software renderer. The bundled MESA software renderer is "
 "loaded instead of the default OpenGL driver."
@@ -13565,18 +13333,18 @@ msgstr ""
 msgid "Error with zip archive"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:116
+#: src/libslic3r/PrintObject.cpp:117
 msgid "Processing triangulated mesh"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:277
+#: src/libslic3r/PrintObject.cpp:278
 msgid "Generating perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:395
+#: src/libslic3r/PrintObject.cpp:396
 msgid "Preparing infill"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:581
+#: src/libslic3r/PrintObject.cpp:582
 msgid "Generating support material"
 msgstr ""
diff --git a/resources/localization/SuperSlicer_final.po b/resources/localization/SuperSlicer_final.po
new file mode 100644
index 00000000000..f2a86924581
--- /dev/null
+++ b/resources/localization/SuperSlicer_final.po
@@ -0,0 +1,11803 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#: src/slic3r/GUI/Tab.cpp:1647 src/libslic3r/PrintConfig.cpp:935
+#: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/PrintConfig.cpp:3606
+msgid ""
+msgstr "Project-Id-Version: \nReport-Msgid-Bugs-To: \nPOT-Creation-Date: 2019-04-09 14:34+0200\nPO-Revision-Date: 2019-04-09 15:04+0200\nLanguage: en\nMIME-Version: 1.0\nContent-Type: text/plain; charset=UTF-8\nContent-Transfer-Encoding: 8bit\nLast-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\nLanguage-Team: \nX-Generator: Poedit 2.0.8\n"
+
+#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:298
+msgid "Portions copyright"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261
+msgid "Copyright"
+msgstr ""
+
+#. TRN "Slic3r _is licensed under the_ License"
+#: src/slic3r/GUI/AboutDialog.cpp:134
+msgid "License agreements of all following programs (libraries) are part of application license agreement"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:204
+#, possible-c-format
+msgid "About %s"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:236 src/slic3r/GUI/GUI_App.cpp:239
+#: src/slic3r/GUI/MainFrame.cpp:153
+msgid "Version"
+msgstr "Version"
+
+#. TRN "Slic3r _is licensed under the_ License"
+#: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:243
+msgid "is licensed under the"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:243
+msgid "GNU Affero General Public License, version 3"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:265
+msgid "SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro Ranellucci and the RepRap community."
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:266
+msgid "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:77
+#, possible-c-format
+msgid "%s has encountered an error. It was likely caused by running out of memory. If you are sure you have enough RAM on your system, this may also be a bug and we would be glad if you reported it."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:157
+#, possible-c-format
+msgid "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\nError message: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:160
+#, possible-c-format
+msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
+#, possible-c-format
+msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:166
+#, possible-c-format
+msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:169
+#, possible-c-format
+msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
+msgid "Unknown error occured during exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:534
+msgid "Running post-processing scripts"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:179
+#, possible-c-format
+msgid "G-code file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:184
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:240
+msgid "Slicing complete"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:235
+#, possible-c-format
+msgid "Masked SLA file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:537
+msgid "Copying of the temporary G-code to the output G-code failed"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:567
+#, possible-c-format
+msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:93
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162
+msgid "Size"
+msgstr "Size"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:94
+msgid "Origin"
+msgstr "Origin"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1387
+msgid "Diameter"
+msgstr "Diameter"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:110
+msgid "Size in X and Y of the rectangular plate."
+msgstr "Size in X and Y of the rectangular plate."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:121
+msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle."
+msgstr "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:241
+#: src/slic3r/GUI/ConfigWizard.cpp:1355 src/slic3r/GUI/ConfigWizard.cpp:1369
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
+#: src/slic3r/GUI/GCodeViewer.cpp:2369 src/slic3r/GUI/GCodeViewer.cpp:2375
+#: src/slic3r/GUI/GCodeViewer.cpp:2383 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
+#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:114
+#: src/libslic3r/PrintConfig.cpp:123 src/libslic3r/PrintConfig.cpp:134
+#: src/libslic3r/PrintConfig.cpp:284 src/libslic3r/PrintConfig.cpp:410
+#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:459
+#: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:586
+#: src/libslic3r/PrintConfig.cpp:641 src/libslic3r/PrintConfig.cpp:1021
+#: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1055
+#: src/libslic3r/PrintConfig.cpp:1286 src/libslic3r/PrintConfig.cpp:1390
+#: src/libslic3r/PrintConfig.cpp:1623 src/libslic3r/PrintConfig.cpp:2062
+#: src/libslic3r/PrintConfig.cpp:2314 src/libslic3r/PrintConfig.cpp:2393
+#: src/libslic3r/PrintConfig.cpp:2403 src/libslic3r/PrintConfig.cpp:2435
+#: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2611
+#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2760
+#: src/libslic3r/PrintConfig.cpp:2769 src/libslic3r/PrintConfig.cpp:2824
+#: src/libslic3r/PrintConfig.cpp:2833 src/libslic3r/PrintConfig.cpp:2844
+#: src/libslic3r/PrintConfig.cpp:2874 src/libslic3r/PrintConfig.cpp:2883
+#: src/libslic3r/PrintConfig.cpp:2972 src/libslic3r/PrintConfig.cpp:2990
+#: src/libslic3r/PrintConfig.cpp:3102 src/libslic3r/PrintConfig.cpp:3113
+#: src/libslic3r/PrintConfig.cpp:3253 src/libslic3r/PrintConfig.cpp:3376
+#: src/libslic3r/PrintConfig.cpp:3389 src/libslic3r/PrintConfig.cpp:3458
+#: src/libslic3r/PrintConfig.cpp:3517 src/libslic3r/PrintConfig.cpp:3585
+#: src/libslic3r/PrintConfig.cpp:3743 src/libslic3r/PrintConfig.cpp:3887
+#: src/libslic3r/PrintConfig.cpp:3895 src/libslic3r/PrintConfig.cpp:3903
+#: src/libslic3r/PrintConfig.cpp:3936 src/libslic3r/PrintConfig.cpp:3943
+#: src/libslic3r/PrintConfig.cpp:3955 src/libslic3r/PrintConfig.cpp:3966
+#: src/libslic3r/PrintConfig.cpp:3978 src/libslic3r/PrintConfig.cpp:4010
+#: src/libslic3r/PrintConfig.cpp:4021 src/libslic3r/PrintConfig.cpp:4138
+#: src/libslic3r/PrintConfig.cpp:4149 src/libslic3r/PrintConfig.cpp:4157
+#: src/libslic3r/PrintConfig.cpp:4165 src/libslic3r/PrintConfig.cpp:4330
+#: src/libslic3r/PrintConfig.cpp:4364 src/libslic3r/PrintConfig.cpp:4503
+#: src/libslic3r/PrintConfig.cpp:4512 src/libslic3r/PrintConfig.cpp:4521
+#: src/libslic3r/PrintConfig.cpp:4531 src/libslic3r/PrintConfig.cpp:4596
+#: src/libslic3r/PrintConfig.cpp:4606 src/libslic3r/PrintConfig.cpp:4618
+#: src/libslic3r/PrintConfig.cpp:4638 src/libslic3r/PrintConfig.cpp:4648
+#: src/libslic3r/PrintConfig.cpp:4660 src/libslic3r/PrintConfig.cpp:4678
+#: src/libslic3r/PrintConfig.cpp:4693 src/libslic3r/PrintConfig.cpp:4707
+#: src/libslic3r/PrintConfig.cpp:4718 src/libslic3r/PrintConfig.cpp:4731
+#: src/libslic3r/PrintConfig.cpp:4776 src/libslic3r/PrintConfig.cpp:4786
+#: src/libslic3r/PrintConfig.cpp:4795 src/libslic3r/PrintConfig.cpp:4805
+#: src/libslic3r/PrintConfig.cpp:4821 src/libslic3r/PrintConfig.cpp:4845
+msgid "mm"
+msgstr "mm"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:131
+msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center."
+msgstr "Diameter of the print bed. It is assumed that origin (0,0) is located in the center."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:141
+msgid "Rectangular"
+msgstr "Rectangular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:142
+msgid "Circular"
+msgstr "Circular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:286
+#: src/slic3r/GUI/GUI_Preview.cpp:1032 src/libslic3r/ExtrusionEntity.cpp:287
+#: src/libslic3r/ExtrusionEntity.cpp:330
+msgid "Custom"
+msgstr "Custom"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:145
+msgid "Invalid"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
+msgid "Shape"
+msgstr "Shape"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:243
+msgid "Load shape from STL..."
+msgstr "Load shape from STL..."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1868
+msgid "Settings"
+msgstr "Settings"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:315
+msgid "Texture"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
+msgid "Load..."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
+#: src/slic3r/GUI/Tab.cpp:3533
+msgid "Remove"
+msgstr "Remove"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
+msgid "Not found:"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:395
+msgid "Model"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:563
+msgid "Choose an STL file to import bed shape from:"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
+#: src/slic3r/GUI/BedShapeDialog.cpp:642
+msgid "Invalid file format."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:581
+msgid "Error! Invalid model"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:589
+msgid "The selected file contains no geometry."
+msgstr "The selected file contains no geometry."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:593
+msgid "The selected file contains several disjoint areas. This is not supported."
+msgstr "The selected file contains several disjoint areas. This is not supported."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:608
+msgid "Choose a file to import bed texture from (PNG/SVG):"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:631
+msgid "Choose an STL file to import bed model from:"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1314
+msgid "Bed Shape"
+msgstr "Bed Shape"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:55
+msgid "Network lookup"
+msgstr "Network lookup"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:72
+msgid "Address"
+msgstr "Address"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:73
+msgid "Hostname"
+msgstr "Hostname"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:74
+msgid "Service name"
+msgstr "Service name"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:76
+msgid "OctoPrint version"
+msgstr "OctoPrint version"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:218
+msgid "Searching for devices"
+msgstr "Searching for devices"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:225
+msgid "Finished"
+msgstr "Finished"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:16
+msgid "Buttons And Text Colors Description"
+msgstr "Buttons And Text Colors Description"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:36
+msgid "Value is the same as the system value"
+msgstr "Value is the same as the system value"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:53
+msgid "Value was changed and is not equal to the system value or the last saved preset"
+msgstr "Value was changed and is not equal to the system value or the last saved preset"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:47
+msgid "Zero layer height is not valid.\n\nThe layer height will be reset to 0.01."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:48
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Layer height"
+msgstr "Layer height"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:59
+msgid "Zero first layer height is not valid.\n\nThe first layer height will be reset to 0.01."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:1693
+msgid "First layer height"
+msgstr "First layer height"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:82
+#, possible-c-format
+msgid "The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters'"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:92
+msgid "Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:93
+msgid "Spiral Vase"
+msgstr "Spiral Vase"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:143
+msgid "The Wipe Tower currently supports the non-soluble supports only\nif they are printed with the current extruder without triggering a tool change.\n(both support_material_extruder and support_material_interface_extruder need to be set to 0)."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:147
+msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:148
+#: src/slic3r/GUI/ConfigManipulation.cpp:180
+#: src/slic3r/GUI/ConfigManipulation.cpp:226
+msgid "Wipe Tower"
+msgstr "Wipe Tower"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:176
+msgid "For the Wipe Tower to work with the soluble supports, the support layers\nneed to be synchronized with the object layers."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:179
+msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:222
+#, possible-c-format
+msgid "Did you forgot to put a '%' in the "
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:222
+msgid " field? it's currently set to "
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:223
+msgid " mm."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:225
+msgid "Shall I add the '%'?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:257
+msgid "It's not possible to use a bigger value for the brim offset than the brim width, as it won't extrude anything. Brim offset have to be lower than the brim width."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:260
+msgid "Shall I switch the brim offset to 0?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:261
+msgid "Brim configuration"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:279
+msgid "Supports work better, if the following feature is enabled:\n- overhangs with bridge speed & fan"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:282
+msgid "Shall I adjust those settings for supports?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:283
+msgid "Support Generator"
+msgstr "Support Generator"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:332
+#, possible-c-format
+msgid "The %1% infill pattern is not supposed to work at 100%% density."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:334
+msgid "Shall I switch to rectilinear fill pattern?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:335 src/slic3r/GUI/Plater.cpp:389
+#: src/libslic3r/PrintConfig.cpp:1721 src/libslic3r/PrintConfig.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:1953
+msgid "Infill"
+msgstr "Infill"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:502
+msgid "Head penetration should not be greater than the head width."
+msgstr "Head penetration should not be greater than the head width."
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:504
+msgid "Invalid Head penetration"
+msgstr "Invalid Head penetration"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:515
+msgid "Pinhead diameter should be smaller than the pillar diameter."
+msgstr "Pinhead diameter should be smaller than the pillar diameter."
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:517
+msgid "Invalid pinhead diameter"
+msgstr "Invalid pinhead diameter"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
+msgid "Upgrade"
+msgstr "Upgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
+msgid "Before roll back"
+msgstr "Before roll back"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
+#: src/libslic3r/PrintConfig.cpp:174
+msgid "User"
+msgstr "User"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+#: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:270
+msgid "Unknown"
+msgstr "Unknown"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
+msgid "Active"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
+msgid "SuperSlicer version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1470
+msgid "print"
+msgstr "print"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
+msgid "filaments"
+msgstr "filaments"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1472
+msgid "SLA print"
+msgstr "SLA print"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/slic3r/GUI/Plater.cpp:690
+#: src/libslic3r/Preset.cpp:1473
+msgid "SLA material"
+msgstr "SLA material"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1474
+msgid "printer"
+msgstr "printer"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1305
+msgid "vendor"
+msgstr "vendor"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
+msgid "version"
+msgstr "version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
+msgid "min SuperSlicer version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+msgid "max SuperSlicer version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "model"
+msgstr "model"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "variants"
+msgstr "variants"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:83
+#, possible-c-format
+msgid "Incompatible with this %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86
+msgid "Activate"
+msgstr "Activate"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112
+msgid "Configuration Snapshots"
+msgstr "Configuration Snapshots"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:241
+msgid "nozzle"
+msgstr "nozzle"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:245
+msgid "Alternate nozzles:"
+msgstr "Alternate nozzles:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:309
+msgid "All standard"
+msgstr "All standard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:309
+msgid "Standard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:310 src/slic3r/GUI/ConfigWizard.cpp:606
+#: src/slic3r/GUI/Tab.cpp:3614 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
+msgid "All"
+msgstr "All"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:311 src/slic3r/GUI/ConfigWizard.cpp:607
+#: src/slic3r/GUI/DoubleSlider.cpp:1935 src/slic3r/GUI/Plater.cpp:361
+#: src/slic3r/GUI/Plater.cpp:501
+msgid "None"
+msgstr "None"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:447
+#, possible-c-format
+msgid "Welcome to the %s Configuration Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:449
+#, possible-c-format
+msgid "Welcome to the %s Configuration Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:451
+msgid "Welcome"
+msgstr "Welcome"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:453
+#, possible-c-format
+msgid "Hello, welcome to %s! This %s helps you with the initial configuration; just a few settings and you will be ready to print."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:458
+msgid "Remove user profiles (a snapshot will be taken beforehand)"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:500
+#, possible-c-format
+msgid "%s Family"
+msgstr "%s Family"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:595
+msgid "Printer:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:597
+msgid "Vendor:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:598
+msgid "Profile:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:670 src/slic3r/GUI/ConfigWizard.cpp:820
+#: src/slic3r/GUI/ConfigWizard.cpp:881 src/slic3r/GUI/ConfigWizard.cpp:1018
+msgid "(All)"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:699
+msgid "Filaments marked with <b>*</b> are <b>not</b> compatible with some installed printers."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:702
+msgid "All installed printers are compatible with the selected filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:722
+msgid "Only the following installed printers are compatible with the selected filament:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1108
+msgid "Custom Printer Setup"
+msgstr "Custom Printer Setup"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1108
+msgid "Custom Printer"
+msgstr "Custom Printer"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1110
+msgid "Define a custom printer profile"
+msgstr "Define a custom printer profile"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1112
+msgid "Custom profile name:"
+msgstr "Custom profile name:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1137
+msgid "Automatic updates"
+msgstr "Automatic updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1137
+msgid "Updates"
+msgstr "Updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1145 src/slic3r/GUI/Preferences.cpp:73
+msgid "Check for application updates"
+msgstr "Check for application updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1149
+#, possible-c-format
+msgid "If enabled, %s checks for new application versions online. When a new version becomes available, a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:89
+msgid "Update built-in Presets automatically"
+msgstr "Update built-in Presets automatically"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1159
+#, possible-c-format
+msgid "If enabled, %s downloads updates of built-in system presets in the background.These updates are downloaded into a separate temporary location.When a new preset version becomes available it is offered at application startup."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1162
+msgid "Updates are never applied without user's consent and never overwrite user's customized settings."
+msgstr "Updates are never applied without user's consent and never overwrite user's customized settings."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1167
+msgid "Additionally a backup snapshot of the whole configuration is created before an update is applied."
+msgstr "Additionally a backup snapshot of the whole configuration is created before an update is applied."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1174 src/slic3r/GUI/GUI_ObjectList.cpp:1808
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464 src/slic3r/GUI/Plater.cpp:3100
+#: src/slic3r/GUI/Plater.cpp:3936 src/slic3r/GUI/Plater.cpp:3967
+msgid "Reload from disk"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1177
+msgid "Export full pathnames of models and parts sources into 3mf and amf files"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1181
+msgid "If enabled, allows the Reload from disk command to automatically find and load the files when invoked.\nIf not enabled, the Reload from disk command will ask to select each file using an open file dialog."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
+msgid "View mode"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1191
+msgid "SuperSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1196
+msgid "Simple mode"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1197
+msgid "Advanced mode"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1198
+msgid "Expert mode"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1204
+msgid "The size of the object can be specified in inches"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1205
+msgid "Use inches"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1240
+msgid "Other Vendors"
+msgstr "Other Vendors"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1244
+#, possible-c-format
+msgid "Pick another vendor supported by %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
+msgid "Firmware Type"
+msgstr "Firmware Type"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
+msgid "Firmware"
+msgstr "Firmware"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1280
+msgid "Choose the type of firmware used by your printer."
+msgstr "Choose the type of firmware used by your printer."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1314
+msgid "Bed Shape and Size"
+msgstr "Bed Shape and Size"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1317
+msgid "Set the shape of your printer's bed."
+msgstr "Set the shape of your printer's bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
+msgid "Filament and Nozzle Diameters"
+msgstr "Filament and Nozzle Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
+msgid "Print Diameters"
+msgstr "Print Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1351
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr "Enter the diameter of your printer's hot end nozzle."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1354
+msgid "Nozzle Diameter:"
+msgstr "Nozzle Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1364
+msgid "Enter the diameter of your filament."
+msgstr "Enter the diameter of your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1365
+msgid "Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+msgstr "Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1368
+msgid "Filament Diameter:"
+msgstr "Filament Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
+msgid "Nozzle and Bed Temperatures"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
+msgid "Temperatures"
+msgstr "Temperatures"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
+msgid "Enter the temperature needed for extruding your filament."
+msgstr "Enter the temperature needed for extruding your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1414
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1417
+msgid "Extrusion Temperature:"
+msgstr "Extrusion Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1418 src/slic3r/GUI/ConfigWizard.cpp:1432
+#: src/libslic3r/PrintConfig.cpp:240 src/libslic3r/PrintConfig.cpp:242
+#: src/libslic3r/PrintConfig.cpp:469 src/libslic3r/PrintConfig.cpp:1065
+#: src/libslic3r/PrintConfig.cpp:1277 src/libslic3r/PrintConfig.cpp:1672
+#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:3568
+msgid "°C"
+msgstr "°C"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1427
+msgid "Enter the bed temperature needed for getting your filament to stick to your heated bed."
+msgstr "Enter the bed temperature needed for getting your filament to stick to your heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1428
+msgid "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed."
+msgstr "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1431
+msgid "Bed Temperature:"
+msgstr "Bed Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2586
+msgid "Filaments"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2588
+msgid "SLA Materials"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1934
+msgid "FFF Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1939
+msgid "SLA Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2258 src/slic3r/GUI/DoubleSlider.cpp:2346
+#: src/slic3r/GUI/DoubleSlider.cpp:2366 src/slic3r/GUI/GUI.cpp:259
+msgid "Notice"
+msgstr "Notice"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2278
+msgid "The following FFF printer models have no filament selected:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2282
+msgid "Do you want to select default filaments for these FFF printer models?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2296
+msgid "The following SLA printer models have no materials selected:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2300
+msgid "Do you want to select default SLA materials for these printer models?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2529
+msgid "Select all standard printers in this page"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2532
+msgid "< &Back"
+msgstr "< &Back"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2533
+msgid "&Next >"
+msgstr "&Next >"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2534
+msgid "&Finish"
+msgstr "&Finish"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2535 src/slic3r/GUI/FirmwareDialog.cpp:151
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
+#: src/slic3r/GUI/ProgressStatusBar.cpp:26
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
+msgid "Cancel"
+msgstr "Cancel"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2549
+msgid "Prusa FFF Technology Printers"
+msgstr "Prusa FFF Technology Printers"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2552
+msgid "Prusa MSLA Technology Printers"
+msgstr "Prusa MSLA Technology Printers"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2586
+msgid "Filament Profiles Selection"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2586 src/slic3r/GUI/ConfigWizard.cpp:2588
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
+msgid "Type:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2588
+msgid "SLA Material Profiles Selection"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2695
+msgid "Configuration Assistant"
+msgstr "Configuration Assistant"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2696
+msgid "Configuration &Assistant"
+msgstr "Configuration &Assistant"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2698
+msgid "Configuration Wizard"
+msgstr "Configuration Wizard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2699
+msgid "Configuration &Wizard"
+msgstr "Configuration &Wizard"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:104
+msgid "Place bearings in slots and resume printing"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1276
+msgid "One layer mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1278
+msgid "Discard all custom changes"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1283 src/slic3r/GUI/DoubleSlider.cpp:2076
+msgid "Jump to move"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1287
+#, possible-c-format
+msgid "Jump to height %s Set ruler mode\n or Set extruder sequence for the entire print"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1289
+#, possible-c-format
+msgid "Jump to height %s or Set ruler mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1295
+msgid "Edit current color - Right click the colored slider segment"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1305
+msgid "Print mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1319
+msgid "Add extruder change - Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1321
+msgid "Add color change - Left click for predefined color or Shift + Left click for custom color selection"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1323
+msgid "Add color change - Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1324
+msgid "or press \"+\" key"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1326
+msgid "Add another code - Ctrl + Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1327
+msgid "Add another code - Right click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1333
+msgid "The sequential print is on.\nIt's impossible to apply any custom G-code for objects printing sequentually.\nThis code won't be processed during G-code generation."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1342
+#, possible-c-format
+msgid "Color change (\"%1%\")"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1343
+#, possible-c-format
+msgid "Color change (\"%1%\") for Extruder %2%"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1345
+#, possible-c-format
+msgid "Pause print (\"%1%\")"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1347
+#, possible-c-format
+msgid "Custom template (\"%1%\")"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1349
+#, possible-c-format
+msgid "Extruder (tool) is changed to Extruder \"%1%\""
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1356
+msgid "Note"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1358
+msgid "G-code associated to this tick mark is in a conflict with print mode.\nEditing it will cause changes of Slider data."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1361
+msgid "There is a color change for extruder that won't be used till the end of print job.\nThis code won't be processed during G-code generation."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1364
+msgid "There is an extruder change set to the same extruder.\nThis code won't be processed during G-code generation."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1367
+msgid "There is a color change for extruder that has not been used before.\nCheck your settings to avoid redundant color changes."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1372
+msgid "Delete tick mark - Left click or press \"-\" key"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1374
+msgid "Edit tick mark - Ctrl + Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1375
+msgid "Edit tick mark - Right click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1475 src/slic3r/GUI/DoubleSlider.cpp:1509
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1847
+#, possible-c-format
+msgid "Extruder %d"
+msgstr "Extruder %d"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1476 src/slic3r/GUI/GUI_ObjectList.cpp:1848
+msgid "active"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1485
+msgid "Switch code to Change extruder"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1485 src/slic3r/GUI/GUI_ObjectList.cpp:1815
+msgid "Change extruder"
+msgstr "Change extruder"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1486
+msgid "Change extruder (N/A)"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1488
+msgid "Use another extruder"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1510
+msgid "used"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1518
+#, possible-c-format
+msgid "Switch code to Color change (%1%) for:"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1519
+#, possible-c-format
+msgid "Add color change (%1%) for:"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1870
+msgid "Add color change"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1880
+msgid "Add pause print"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1884
+msgid "Add custom template"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1887
+msgid "Add custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1905
+msgid "Edit color"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1906
+msgid "Edit pause print message"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1907
+msgid "Edit custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1913
+msgid "Delete color change"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1914
+msgid "Delete tool change"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1915
+msgid "Delete pause print"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1916
+msgid "Delete custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1926 src/slic3r/GUI/DoubleSlider.cpp:2076
+#: src/slic3r/GUI/DoubleSlider.cpp:2080
+msgid "Jump to height"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1935
+msgid "Supprese show the ruler"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
+msgid "Show object height"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
+msgid "Show object height on the ruler"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
+msgid "Show estimated print time"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
+msgid "Show estimated print time on the ruler"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
+msgid "Ruler mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
+msgid "Set ruler mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1952
+msgid "Set extruder sequence for the entire print"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2038
+msgid "Enter custom G-code used on current layer"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2039
+#, possible-c-format
+msgid "Custom G-code on current layer (%1% mm)."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2054
+msgid "Enter short message shown on Printer display when a print is paused"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2055
+#, possible-c-format
+msgid "Message for pause print on current layer (%1% mm)."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2075
+msgid "Enter the move you want to jump to"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2075 src/slic3r/GUI/DoubleSlider.cpp:2079
+msgid "Enter the height you want to jump to"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2340
+msgid "The last color change data was saved for a single extruder printing."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2341 src/slic3r/GUI/DoubleSlider.cpp:2356
+msgid "The last color change data was saved for a multi extruder printing."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2343
+msgid "Your current changes will delete all saved color changes."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2344 src/slic3r/GUI/DoubleSlider.cpp:2364
+msgid "Are you sure you want to continue?"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2357
+msgid "Select YES if you want to delete all saved tool changes, \nNO if you want all tool changes switch to color changes, \nor CANCEL to leave it unchanged."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2360
+msgid "Do you want to delete all saved tool changes?"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2362
+msgid "The last color change data was saved for a multi extruder printing with tool changes for whole print."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2363
+msgid "Your current changes will delete all saved extruder (tool) changes."
+msgstr ""
+
+#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:506
+#: src/slic3r/GUI/GUI_ObjectList.cpp:518
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1012
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4479
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4489
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4524
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:209
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:291
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:499
+msgid "default"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
+msgid "Set extruder sequence"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
+msgid "Set extruder change for every"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
+#: src/libslic3r/PrintConfig.cpp:623 src/libslic3r/PrintConfig.cpp:1869
+#: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2982
+#: src/libslic3r/PrintConfig.cpp:3143 src/libslic3r/PrintConfig.cpp:3401
+#: src/libslic3r/PrintConfig.cpp:3449
+msgid "layers"
+msgstr "layers"
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
+msgid "Set extruder(tool) sequence"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
+msgid "Remove extruder from sequence"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
+msgid "Add extruder to sequence"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:185
+msgid "default value"
+msgstr "default value"
+
+#: src/slic3r/GUI/Field.cpp:188
+msgid "parameter name"
+msgstr "parameter name"
+
+#: src/slic3r/GUI/Field.cpp:199 src/slic3r/GUI/OptionsGroup.cpp:848
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
+msgid "N/A"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:221
+#, possible-c-format
+msgid "%s doesn't support percentage"
+msgstr "%s doesn't support percentage"
+
+#: src/slic3r/GUI/Field.cpp:241 src/slic3r/GUI/Field.cpp:272
+#: src/slic3r/GUI/Field.cpp:1484 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
+msgid "Invalid numeric input."
+msgstr "Invalid numeric input."
+
+#: src/slic3r/GUI/Field.cpp:250 src/slic3r/GUI/Field.cpp:283
+#: src/slic3r/GUI/Field.cpp:1496
+msgid "Input value is out of range"
+msgstr "Input value is out of range"
+
+#: src/slic3r/GUI/Field.cpp:297
+#, possible-c-format
+msgid "Do you mean %s%% instead of %s %s?\nSelect YES if you want to change this value to %s%%, \nor NO if you are sure that %s %s is a correct value."
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:300
+msgid "Parameter validation"
+msgstr "Parameter validation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:150
+msgid "Flash!"
+msgstr "Flash!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:152
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr "Flashing in progress. Please do not disconnect the printer!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:199
+msgid "Flashing failed"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:282
+msgid "Flashing succeeded!"
+msgstr "Flashing succeeded!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:283
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr "Flashing failed. Please see the avrdude log below."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:284
+msgid "Flashing cancelled."
+msgstr "Flashing cancelled."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:332
+#, possible-c-format
+msgid "This firmware hex file does not match the printer model.\nThe hex file is intended for: %s\nPrinter reported: %s\n\nDo you want to continue and flash this hex file anyway?\nPlease only continue if you are sure this is the right thing to do."
+msgstr "This firmware hex file does not match the printer model.\nThe hex file is intended for: %s\nPrinter reported: %s\n\nDo you want to continue and flash this hex file anyway?\nPlease only continue if you are sure this is the right thing to do."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
+#, possible-c-format
+msgid "Multiple %s devices found. Please only connect one at a time for flashing."
+msgstr "Multiple %s devices found. Please only connect one at a time for flashing."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:436
+#, possible-c-format
+msgid "The %s device was not found.\nIf the device is connected, please press the Reset button next to the USB connector ..."
+msgstr "The %s device was not found.\nIf the device is connected, please press the Reset button next to the USB connector ..."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:548
+#, possible-c-format
+msgid "The %s device could not have been found"
+msgstr "The %s device could not have been found"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:645
+#, possible-c-format
+msgid "Error accessing port at %s: %s"
+msgstr "Error accessing port at %s: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:647
+#, possible-c-format
+msgid "Error: %s"
+msgstr "Error: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:777
+msgid "Firmware flasher"
+msgstr "Firmware flasher"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:802
+msgid "Firmware image:"
+msgstr "Firmware image:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:805
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:324
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:399
+msgid "Browse"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:807
+msgid "Serial port:"
+msgstr "Serial port:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:809
+msgid "Autodetected"
+msgstr "Autodetected"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:810
+msgid "Rescan"
+msgstr "Rescan"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:817
+msgid "Progress:"
+msgstr "Progress:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:820
+msgid "Status:"
+msgstr "Status:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:821
+msgid "Ready"
+msgstr "Ready"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:841
+msgid "Advanced: Output log"
+msgstr "Advanced: Output log"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:852
+#: src/slic3r/GUI/Mouse3DController.cpp:552
+#: src/slic3r/GUI/PrintHostDialogs.cpp:189
+msgid "Close"
+msgstr "Close"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:902
+msgid "Are you sure you want to cancel firmware flashing?\nThis could leave your printer in an unusable state!"
+msgstr "Are you sure you want to cancel firmware flashing?\nThis could leave your printer in an unusable state!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:903
+msgid "Confirmation"
+msgstr "Confirmation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:906
+msgid "Cancelling..."
+msgstr "Cancelling..."
+
+#: src/slic3r/GUI/GCodeViewer.cpp:244
+msgid "Tool position"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1033
+msgid "Generating toolpaths"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1424
+msgid "Generating vertex buffer"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1505
+msgid "Generating index buffers"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
+msgid "Click to hide"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
+msgid "Click to show"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2369
+msgid "up to"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2375
+msgid "above"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
+msgid "from"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
+msgid "to"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2411 src/slic3r/GUI/GCodeViewer.cpp:2419
+#: src/slic3r/GUI/GUI_Preview.cpp:250
+msgid "Feature type"
+msgstr "Feature type"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2411 src/slic3r/GUI/GCodeViewer.cpp:2419
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr "Time"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2419
+msgid "Percentage"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2422
+msgid "Height (mm)"
+msgstr "Height (mm)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2423
+msgid "Width (mm)"
+msgstr "Width (mm)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2424
+msgid "Speed (mm/s)"
+msgstr "Speed (mm/s)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2425
+msgid "Fan Speed (%)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2426
+msgid "Layer Time"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2427
+msgid "Layer Time (log)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2428 src/slic3r/GUI/GUI_Preview.cpp:257
+msgid "Chronology"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2429
+msgid "Volumetric flow rate (mm³/s)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2430 src/slic3r/GUI/GUI_Preview.cpp:259
+#: src/slic3r/GUI/GUI_Preview.cpp:878
+msgid "Tool"
+msgstr "Tool"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2431 src/slic3r/GUI/GCodeViewer.cpp:2480
+#: src/slic3r/GUI/GCodeViewer.cpp:2758 src/slic3r/GUI/GCodeViewer.cpp:2788
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/Plater.cpp:688
+msgid "Filament"
+msgstr "Filament"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2432 src/slic3r/GUI/GUI_Preview.cpp:261
+msgid "Color Print"
+msgstr "Color Print"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2433 src/libslic3r/PrintConfig.cpp:3564
+#: src/libslic3r/PrintConfig.cpp:3575
+msgid "Temperature"
+msgstr "Temperature"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2472 src/slic3r/GUI/GCodeViewer.cpp:2515
+#: src/slic3r/GUI/GCodeViewer.cpp:2520 src/slic3r/GUI/GUI_ObjectList.cpp:306
+#: src/slic3r/GUI/wxExtensions.cpp:516 src/libslic3r/PrintConfig.cpp:997
+msgid "Extruder"
+msgstr "Extruder"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2491
+msgid "Default color"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2515
+msgid "default color"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2610 src/slic3r/GUI/GCodeViewer.cpp:2656
+msgid "Color change"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2629 src/slic3r/GUI/GCodeViewer.cpp:2654
+msgid "Print"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2655 src/slic3r/GUI/GCodeViewer.cpp:2672
+#: src/slic3r/GUI/GUI_Preview.cpp:1031
+msgid "Pause"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Event"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Remaining time"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Duration"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2698 src/slic3r/GUI/GUI_Preview.cpp:1026
+#: src/libslic3r/PrintConfig.cpp:3748
+msgid "Travel"
+msgstr "Travel"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2701
+msgid "Movement"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2702
+msgid "Extrusion"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2703 src/slic3r/GUI/Tab.cpp:2083
+msgid "Retraction"
+msgstr "Retraction"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2734 src/slic3r/GUI/GUI_Preview.cpp:291
+#: src/slic3r/GUI/GUI_Preview.cpp:304
+msgid "Options"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2737 src/slic3r/GUI/GUI_Preview.cpp:1027
+msgid "Retractions"
+msgstr "Retractions"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2738 src/slic3r/GUI/GUI_Preview.cpp:1028
+msgid "Deretractions"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2739 src/slic3r/GUI/GUI_Preview.cpp:1029
+msgid "Tool changes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2740 src/slic3r/GUI/GUI_Preview.cpp:1030
+msgid "Color changes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2741 src/slic3r/GUI/GUI_Preview.cpp:1031
+msgid "Print pauses"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2742 src/slic3r/GUI/GUI_Preview.cpp:1032
+msgid "Custom G-codes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2753 src/slic3r/GUI/GCodeViewer.cpp:2777
+#: src/slic3r/GUI/Plater.cpp:691 src/libslic3r/PrintConfig.cpp:156
+msgid "Printer"
+msgstr "Printer"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2755 src/slic3r/GUI/GCodeViewer.cpp:2782
+#: src/slic3r/GUI/Plater.cpp:687
+msgid "Print settings"
+msgstr "Print settings"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2813 src/slic3r/GUI/GCodeViewer.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1129
+#: src/slic3r/GUI/Plater.cpp:1242
+msgid "Estimated printing time"
+msgstr "Estimated printing time"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2813
+msgid "Normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2818
+msgid "Stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2845
+msgid "Show stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2849
+msgid "Show normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4494
+msgid "Variable layer height"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:230
+msgid "Left mouse button:"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:232
+msgid "Add detail"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:234
+msgid "Right mouse button:"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:236
+msgid "Remove detail"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:238
+msgid "Shift + Left mouse button:"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:240
+msgid "Reset to base"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:242
+msgid "Shift + Right mouse button:"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:244
+msgid "Smoothing"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:246
+msgid "Mouse wheel:"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:248
+msgid "Increase/decrease edit area"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:251
+msgid "Adaptive"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:257
+msgid "Quality / Speed"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:260
+msgid "Higher print quality versus higher print speed."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:271
+msgid "Smooth"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:1027
+msgid "Radius"
+msgstr "Radius"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:287
+msgid "Keep min"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:296 src/slic3r/GUI/GLCanvas3D.cpp:3908
+msgid "Reset"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:561
+msgid "Variable layer height - Manual edit"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:629
+msgid "An object outside the print area was detected."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:630
+msgid "A toolpath outside the print area was detected."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:631
+msgid "SLA supports outside the print area were detected."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:632
+msgid "Some objects are not visible."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:634
+msgid "An object outside the print area was detected.\nResolve the current problem to continue slicing."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:949
+msgid "Seq."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1424
+msgid "Variable layer height - Reset"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1432
+msgid "Variable layer height - Adaptive"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1440
+msgid "Variable layer height - Smooth all"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1839
+msgid "Mirror Object"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:2684
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
+msgid "Gizmo-Move"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:2762
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
+msgid "Gizmo-Rotate"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3279
+msgid "Move Object"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3744 src/slic3r/GUI/GLCanvas3D.cpp:4455
+msgid "Switch to Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3745 src/slic3r/GUI/GLCanvas3D.cpp:4455
+msgid "Print Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
+msgid "Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
+msgid "Material Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3747 src/slic3r/GUI/GLCanvas3D.cpp:4457
+msgid "Printer Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
+msgid "Undo History"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
+msgid "Redo History"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3816
+#, possible-c-format
+msgid "Undo %1$d Action"
+msgid_plural "Undo %1$d Actions"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3816
+#, possible-c-format
+msgid "Redo %1$d Action"
+msgid_plural "Redo %1$d Actions"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3836 src/slic3r/GUI/GLCanvas3D.cpp:4473
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Search.cpp:426
+msgid "Search"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3850 src/slic3r/GUI/GLCanvas3D.cpp:3858
+#: src/slic3r/GUI/Search.cpp:433
+msgid "Enter a search term"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3889
+msgid "Arrange options"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3896
+msgid "Gap size"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3901
+msgid "Enable rotations"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3920 src/slic3r/GUI/GLCanvas3D.cpp:4365
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Plater.cpp:1657
+msgid "Arrange"
+msgstr "Arrange"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4339
+msgid "Add..."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4347 src/slic3r/GUI/GUI_ObjectList.cpp:1861
+#: src/slic3r/GUI/Plater.cpp:3933 src/slic3r/GUI/Plater.cpp:3957
+#: src/slic3r/GUI/Tab.cpp:3533
+msgid "Delete"
+msgstr "Delete"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4356 src/slic3r/GUI/KBShortcutsDialog.cpp:116
+#: src/slic3r/GUI/Plater.cpp:4863
+msgid "Delete all"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365 src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Arrange selection"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365
+msgid "Click right mouse button to show arrangement options"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4387
+msgid "Copy"
+msgstr "Copy"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4396
+msgid "Paste"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4408 src/slic3r/GUI/Plater.cpp:3792
+#: src/slic3r/GUI/Plater.cpp:3804 src/slic3r/GUI/Plater.cpp:3942
+msgid "Add instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4419 src/slic3r/GUI/Plater.cpp:3944
+msgid "Remove instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4432
+msgid "Split to objects"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4442 src/slic3r/GUI/GUI_ObjectList.cpp:1633
+msgid "Split to parts"
+msgstr "Split to parts"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/KBShortcutsDialog.cpp:117
+#: src/slic3r/GUI/MainFrame.cpp:1139
+msgid "Undo"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/GLCanvas3D.cpp:4583
+msgid "Click right mouse button to open/close History"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4567
+#, possible-c-format
+msgid "Next Undo action: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4583 src/slic3r/GUI/KBShortcutsDialog.cpp:118
+#: src/slic3r/GUI/MainFrame.cpp:1142
+msgid "Redo"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4605
+#, possible-c-format
+msgid "Next Redo action: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:6233
+msgid "Selection-Add from rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:6252
+msgid "Selection-Remove from rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:5715
+msgid "Cut"
+msgstr "Cut"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
+msgid "Keep upper part"
+msgstr "Keep upper part"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
+msgid "Keep lower part"
+msgstr "Keep lower part"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172
+msgid "Rotate lower part upwards"
+msgstr "Rotate lower part upwards"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177
+msgid "Perform cut"
+msgstr "Perform cut"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
+msgid "Paint-on supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
+msgid "Clipping of view"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
+msgid "Reset direction"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27
+msgid "Brush size"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28
+msgid "Brush shape"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29
+msgid "Left mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
+msgid "Enforce supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
+msgid "Right mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:374
+msgid "Block supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
+msgid "Shift + Left mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:369
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:379
+msgid "Remove selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
+msgid "Remove all selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
+msgid "Circle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1608
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1620
+msgid "Sphere"
+msgstr "Sphere"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129
+msgid "Autoset by angle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:119
+msgid "Reset selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:142
+msgid "Alt + Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:160
+msgid "Paints all facets inside, regardless of their orientation."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:174
+msgid "Ignores facets facing away from the camera."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:204
+msgid "Ctrl + Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
+msgid "Autoset custom supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
+msgid "Threshold:"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
+msgid "Enforce"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
+msgid "Block"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295
+msgid "Block supports by angle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296
+msgid "Add supports by angle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
+msgid "Place on face"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
+msgid "Hollow this object"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
+msgid "Preview hollowed and drilled model"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
+msgid "Offset"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56
+msgid "Quality"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
+#: src/libslic3r/PrintConfig.cpp:4837
+msgid "Closing distance"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
+msgid "Hole diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
+msgid "Hole depth"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
+msgid "Remove selected holes"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
+msgid "Remove all holes"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
+msgid "Show supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308
+msgid "Add drainage hole"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424
+msgid "Delete drainage hole"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624
+msgid "Hollowing parameter change"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693
+msgid "Change drainage hole diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785
+msgid "Hollow and drill"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835
+msgid "Move drainage hole"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64
+msgid "Move"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
+#: src/libslic3r/PrintConfig.cpp:5767
+msgid "Rotate"
+msgstr "Rotate"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:548
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:564
+#: src/libslic3r/PrintConfig.cpp:5782
+msgid "Scale"
+msgstr "Scale"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:382
+msgid "Enforce seam"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:384
+msgid "Block seam"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
+msgid "Seam painting"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
+msgid "Head diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
+msgid "Lock supports under new islands"
+msgstr "Lock supports under new islands"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
+msgid "Remove selected points"
+msgstr "Remove selected points"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
+msgid "Remove all points"
+msgstr "Remove all points"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
+msgid "Apply changes"
+msgstr "Apply changes"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
+msgid "Discard changes"
+msgstr "Discard changes"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
+msgid "Minimal points distance"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
+#: src/libslic3r/PrintConfig.cpp:4667
+msgid "Support points density"
+msgstr "Support points density"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
+msgid "Auto-generate points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
+msgid "Manual editing"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374
+msgid "Add support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514
+msgid "Delete support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694
+msgid "Change point head diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762
+msgid "Support parameter change"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
+msgid "SLA Support Points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
+msgid "SLA gizmo turned on"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911
+msgid "Do you want to save your manually edited support points?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
+msgid "Save changes?"
+msgstr "Save changes?"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924
+msgid "SLA gizmo turned off"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955
+msgid "Move support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048
+msgid "Support points edit"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127
+msgid "Autogeneration will erase all manually edited points."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128
+msgid "Are you sure you want to do it?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129
+#: src/slic3r/GUI/GUI.cpp:271 src/slic3r/GUI/PhysicalPrinterDialog.cpp:598
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:622
+#: src/slic3r/GUI/WipeTowerDialog.cpp:45
+#: src/slic3r/GUI/WipeTowerDialog.cpp:366
+msgid "Warning"
+msgstr "Warning"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134
+msgid "Autogenerate support points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181
+msgid "SLA gizmo keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192
+msgid "Note: some shortcuts work in (non)editing mode only."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+msgid "Left click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
+msgid "Add point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
+msgid "Right click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
+msgid "Remove point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
+msgid "Drag"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+msgid "Move point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+msgid "Add point to selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+msgid "Remove point from selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
+msgid "Select by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
+msgid "Deselect by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
+msgid "Select all points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
+msgid "Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
+msgid "Move clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
+msgid "Reset clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
+msgid "Switch to editing mode"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
+msgid "Gizmo-Scale"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630
+msgid "Gizmo-Place on Face"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40
+msgid "Entering Paint-on supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:41
+msgid "Entering Seam painting"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48
+msgid "Leaving Seam painting"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:49
+msgid "Leaving Paint-on supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:372
+msgid "Add supports"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:242
+msgid "is based on PrusaSlicer by Prusa and Slic3r by Alessandro Ranellucci and the RepRap community."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:244
+msgid "Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:245
+msgid "Artwork model by Durand Remi"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:385
+#, possible-c-format
+msgid "Starting with %1% 2.3, configuration directory on Linux has changed (according to XDG Base Directory Specification) to \n%2%.\n\nThis directory did not exist yet (maybe you run the new version for the first time).\nHowever, an old %1% configuration directory was detected in \n%3%.\n\nConsider moving the contents of the old directory to the new location in order to access your profiles, etc.\nNote that if you decide to downgrade %1% in future, it will use the old location again.\n\nWhat do you want to do now?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:393
+#, possible-c-format
+msgid "%s - BREAKING CHANGE"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:395
+msgid "Quit, I will move my data now"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:395
+msgid "Start the application"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:584
+#, possible-c-format
+msgid "%s has encountered an error. It was likely caused by running out of memory. If you are sure you have enough RAM on your system, this may also be a bug and we would be glad if you reported it.\n\nThe application will now terminate."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:587
+msgid "Fatal error"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:707
+msgid "Error parsing PrusaSlicer config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:713
+msgid "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:767
+#, possible-c-format
+msgid "%s\nDo you want to continue?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:769 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
+msgid "Remember my choice"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:804
+msgid "Loading configuration"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:863
+msgid "Preparing settings tabs"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1108
+msgid "You have the following presets with saved options for \"Print Host upload\""
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1112
+msgid "But since this version of PrusaSlicer we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1114
+msgid "By default new Printer devices will be named as \"Printer N\" during its creation.\nNote: This name can be changed later from the physical printers settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1117
+msgid "Information"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1130 src/slic3r/GUI/GUI_App.cpp:1141
+msgid "Recreating"
+msgstr "Recreating"
+
+#: src/slic3r/GUI/GUI_App.cpp:1146
+msgid "Loading of current presets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1151
+msgid "Loading of a mode view"
+msgstr "Loading of a mode view"
+
+#: src/slic3r/GUI/GUI_App.cpp:1303
+msgid "Choose one file (3MF/AMF):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1315
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/GUI_App.cpp:1327
+msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1338
+msgid "Changing of an application language"
+msgstr "Changing of an application language"
+
+#: src/slic3r/GUI/GUI_App.cpp:1388
+msgid "Select the language"
+msgstr "Select the language"
+
+#: src/slic3r/GUI/GUI_App.cpp:1388
+msgid "Language"
+msgstr "Language"
+
+#: src/slic3r/GUI/GUI_App.cpp:1518
+msgid "modified"
+msgstr "modified"
+
+#: src/slic3r/GUI/GUI_App.cpp:1567
+#, possible-c-format
+msgid "Run %s"
+msgstr "Run %s"
+
+#: src/slic3r/GUI/GUI_App.cpp:1571
+msgid "&Configuration Snapshots"
+msgstr "&Configuration Snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:1571
+msgid "Inspect / activate configuration snapshots"
+msgstr "Inspect / activate configuration snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:1572
+msgid "Take Configuration &Snapshot"
+msgstr "Take Configuration &Snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:1572
+msgid "Capture a configuration snapshot"
+msgstr "Capture a configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:1573
+msgid "Check for updates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1573
+msgid "Check for configuration updates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1576
+msgid "&Preferences"
+msgstr "&Preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:1582
+msgid "Application preferences"
+msgstr "Application preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:1587 src/slic3r/GUI/wxExtensions.cpp:674
+msgid "Simple"
+msgstr "Simple"
+
+#: src/slic3r/GUI/GUI_App.cpp:1587
+msgid "Simple View Mode"
+msgstr "Simple View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:1589
+msgid "Advanced View Mode"
+msgstr "Advanced View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:1590 src/slic3r/GUI/wxExtensions.cpp:677
+msgid "Expert"
+msgstr "Expert"
+
+#: src/slic3r/GUI/GUI_App.cpp:1590
+msgid "Expert View Mode"
+msgstr "Expert View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:1595
+msgid "Mode"
+msgstr "Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:1595
+#, possible-c-format
+msgid "%s View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1598
+msgid "&Language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1601
+msgid "Flash printer &firmware"
+msgstr "Flash printer &firmware"
+
+#: src/slic3r/GUI/GUI_App.cpp:1601
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr "Upload a firmware image into an Arduino based printer"
+
+#: src/slic3r/GUI/GUI_App.cpp:1617
+msgid "Taking configuration snapshot"
+msgstr "Taking configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:1617
+msgid "Snapshot name"
+msgstr "Snapshot name"
+
+#: src/slic3r/GUI/GUI_App.cpp:1679
+msgid "Language selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1681
+msgid "Switching the language will trigger application restart.\nYou will lose content of the plater."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1683
+msgid "Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1710
+msgid "&Configuration"
+msgstr "&Configuration"
+
+#: src/slic3r/GUI/GUI_App.cpp:1741
+msgid "The preset(s) modifications are successfully saved"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1941 src/slic3r/GUI/Tab.cpp:3287
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr "It's impossible to print multi-part object(s) with SLA technology."
+
+#: src/slic3r/GUI/GUI_App.cpp:1942
+msgid "Please check and fix your object list."
+msgstr "Please check and fix your object list."
+
+#: src/slic3r/GUI/GUI_App.cpp:1943 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
+#: src/slic3r/GUI/Plater.cpp:2343 src/slic3r/GUI/Tab.cpp:3289
+msgid "Attention!"
+msgstr "Attention!"
+
+#: src/slic3r/GUI/GUI_App.cpp:1960
+msgid "Select a gcode file:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Init.cpp:73 src/slic3r/GUI/GUI_Init.cpp:76
+msgid "PrusaSlicer GUI initialization failed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Init.cpp:76
+#, possible-c-format
+msgid "Fatal error, exception catched: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Start at height"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Stop at height"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:161
+msgid "Remove layer range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:165
+msgid "Add layer range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:51
+msgid "Add part"
+msgstr "Add part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:52
+msgid "Add modifier"
+msgstr "Add modifier"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:53
+msgid "Add support enforcer"
+msgstr "Add support enforcer"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:54
+msgid "Add support blocker"
+msgstr "Add support blocker"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:55
+msgid "Add seam position"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:294
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
+msgid "Name"
+msgstr "Name"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:310 src/slic3r/GUI/GUI_ObjectList.cpp:451
+msgid "Editing"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:396
+#, possible-c-format
+msgid "Auto-repaired (%d errors):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:403
+msgid "degenerate facets"
+msgstr "degenerate facets"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:404
+msgid "edges fixed"
+msgstr "edges fixed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:405
+msgid "facets removed"
+msgstr "facets removed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:406
+msgid "facets added"
+msgstr "facets added"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:407
+msgid "facets reversed"
+msgstr "facets reversed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:408
+msgid "backwards edges"
+msgstr "backwards edges"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:416
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr "Right button click the icon to fix STL through Netfabb"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:453
+msgid "Right button click the icon to change the object settings"
+msgstr "Right button click the icon to change the object settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:455
+msgid "Click the icon to change the object settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:459
+msgid "Right button click the icon to change the object printable property"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:461
+msgid "Click the icon to change the object printable property"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:584
+msgid "Change Extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:599
+msgid "Rename Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:599
+msgid "Rename Sub-object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1212
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4269
+msgid "Instances to Separated Objects"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1227
+msgid "Volumes in Object reordered"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1227
+msgid "Object reordered"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1304
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1676
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1682
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2024
+#, possible-c-format
+msgid "Quick Add Settings (%s)"
+msgstr "Quick Add Settings (%s)"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1398
+msgid "Select showing settings"
+msgstr "Select showing settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1447
+msgid "Add Settings for Layers"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1448
+msgid "Add Settings for Sub-object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1449
+msgid "Add Settings for Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1519
+msgid "Add Settings Bundle for Height range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1520
+msgid "Add Settings Bundle for Sub-object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1521
+msgid "Add Settings Bundle for Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1560
+msgid "Load"
+msgstr "Load"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1600
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1604
+msgid "Box"
+msgstr "Box"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1646
+msgid "Height range Modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
+msgid "Add settings"
+msgstr "Add settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1733
+msgid "Change type"
+msgstr "Change type"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1743
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1755
+msgid "Set as a Separated Object"
+msgstr "Set as a Separated Object"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1755
+msgid "Set as a Separated Objects"
+msgstr "Set as a Separated Objects"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1765
+msgid "Printable"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1780
+msgid "Rename"
+msgstr "Rename"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1791
+msgid "Fix through the Netfabb"
+msgstr "Fix through the Netfabb"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1801 src/slic3r/GUI/Plater.cpp:3970
+msgid "Export as STL"
+msgstr "Export as STL"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1808
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464 src/slic3r/GUI/Plater.cpp:3936
+msgid "Reload the selected volumes from disk"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1815
+msgid "Set extruder for selected items"
+msgstr "Set extruder for selected items"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1847 src/libslic3r/PrintConfig.cpp:592
+#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:1706
+#: src/libslic3r/PrintConfig.cpp:2661 src/libslic3r/PrintConfig.cpp:3523
+msgid "Default"
+msgstr "Default"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1867
+msgid "Scale to print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1867
+msgid "Scale the selected object to fit the print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1873 src/slic3r/GUI/Plater.cpp:4980
+msgid "Convert from imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876 src/slic3r/GUI/Plater.cpp:4980
+msgid "Revert conversion from imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1883
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1891
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2594 src/libslic3r/PrintConfig.cpp:5758
+msgid "Merge"
+msgstr "Merge"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1883
+msgid "Merge objects to the one multipart object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1891
+msgid "Merge objects to the one single object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1968
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2235
+msgid "Add Shape"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2054
+msgid "Load Part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2093
+msgid "Error!"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2168
+msgid "Add Generic Subobject"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2332
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2433
+msgid "Last instance of an object cannot be deleted."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2344
+msgid "Delete Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2366
+msgid "Delete All Instances from Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2382
+msgid "Delete Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2414
+msgid "From Object List You can't delete the last solid part from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2418
+msgid "Delete Subobject"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2437
+msgid "Delete Instance"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2461 src/slic3r/GUI/Plater.cpp:2848
+msgid "The selected object couldn't be split because it contains only one part."
+msgstr "The selected object couldn't be split because it contains only one part."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2465
+msgid "Split to Parts"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2601
+msgid "Merged"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2685
+msgid "Merge all parts to the one single object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2717
+msgid "Add Layers"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
+msgid "Group manipulation"
+msgstr "Group manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2883
+msgid "Object manipulation"
+msgstr "Object manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2896
+msgid "Object Settings to modify"
+msgstr "Object Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2900
+msgid "Part Settings to modify"
+msgstr "Part Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2905
+msgid "Layer range Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2911
+msgid "Part manipulation"
+msgstr "Part manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2917
+msgid "Instance manipulation"
+msgstr "Instance manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
+msgid "Height ranges"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
+msgid "Settings for height range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
+msgid "Delete Selected Item"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3246
+msgid "Delete Selected"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3322
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3350
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3370
+msgid "Add Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3416
+msgid "Cannot insert a new layer range after the current layer range.\nThe next layer range is too thin to be split to two\nwithout violating the minimum layer height."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3420
+msgid "Cannot insert a new layer range between the current and the next layer range.\nThe gap between the current layer range and the next layer range\nis thinner than the minimum layer height allowed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3425
+msgid "Cannot insert a new layer range after the current layer range.\nCurrent layer range overlaps with the next layer range."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3484
+msgid "Edit Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3779
+msgid "Selection-Remove from list"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3787
+msgid "Selection-Add from list"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3905
+msgid "Object or Instance"
+msgstr "Object or Instance"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3906
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Part"
+msgstr "Part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3906
+msgid "Layer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3908
+msgid "Unsupported selection"
+msgstr "Unsupported selection"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3909
+#, possible-c-format
+msgid "You started your selection with %s Item."
+msgstr "You started your selection with %s Item."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3910
+#, possible-c-format
+msgid "In this mode you can select only other %s Items%s"
+msgstr "In this mode you can select only other %s Items%s"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3913
+msgid "of a current Object"
+msgstr "of a current Object"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3918
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3993 src/slic3r/GUI/Plater.cpp:143
+msgid "Info"
+msgstr "Info"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4034
+msgid "You can't change a type of the last solid part of the object."
+msgstr "You can't change a type of the last solid part of the object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Support Enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Support Blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
+msgid "Select type of part"
+msgstr "Select type of part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4046
+msgid "Change Part Type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
+msgid "Enter new name"
+msgstr "Enter new name"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
+msgid "Renaming"
+msgstr "Renaming"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4307
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4434
+#: src/slic3r/GUI/SavePresetDialog.cpp:101
+#: src/slic3r/GUI/SavePresetDialog.cpp:109
+msgid "The supplied name is not valid;"
+msgstr "The supplied name is not valid;"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4308
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4435
+#: src/slic3r/GUI/SavePresetDialog.cpp:102
+msgid "the following characters are not allowed:"
+msgstr "the following characters are not allowed:"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4483
+msgid "Select extruder number:"
+msgstr "Select extruder number:"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
+msgid "This extruder will be set for selected items"
+msgstr "This extruder will be set for selected items"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4509
+msgid "Change Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
+msgid "Set Printable"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
+msgid "Set Unprintable"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111
+msgid "World coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112
+msgid "Local coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88
+msgid "Select coordinate space, in which the transformation will be performed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:659
+msgid "Object name"
+msgstr "Object name"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
+msgid "Position"
+msgstr "Position"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
+#: src/slic3r/GUI/Mouse3DController.cpp:487
+#: src/slic3r/GUI/Mouse3DController.cpp:508
+msgid "Rotation"
+msgstr "Rotation"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271
+#, possible-c-format
+msgid "Toggle %c axis mirroring"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
+msgid "Set Mirror"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
+msgid "in"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
+msgid "Drop to bed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372
+msgid "Reset rotation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394
+msgid "Reset Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
+msgid "Reset scale"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:508
+msgid "Scale factors"
+msgstr "Scale factors"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
+msgid "Translate"
+msgstr "Translate"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:626
+msgid "You cannot use non-uniform scaling mode for multiple objects/parts selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:798
+msgid "Set Position"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:829
+msgid "Set Orientation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:894
+msgid "Set Scale"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:926
+msgid "The currently manipulated object is tilted (rotation angles are not multiples of 90°).\nNon-uniform scaling of tilted objects is only possible in the World coordinate system,\nonce the rotation is embedded into the object coordinates."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:929
+msgid "This operation is irreversible.\nDo you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
+msgid "Additional Settings"
+msgstr "Additional Settings"
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:98
+msgid "Remove parameter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:104
+#, possible-c-format
+msgid "Delete Option %s"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:163
+#, possible-c-format
+msgid "Change Option %s"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:248
+msgid "View"
+msgstr "View"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:250
+msgid "Feature"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:251 src/libslic3r/PrintConfig.cpp:1014
+msgid "Height"
+msgstr "Height"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:252 src/libslic3r/PrintConfig.cpp:1628
+#: src/libslic3r/PrintConfig.cpp:3900
+msgid "Width"
+msgstr "Width"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/PrintConfig.cpp:3026
+msgid "Speed"
+msgstr "Speed"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254 src/slic3r/GUI/PresetHints.cpp:40
+msgid "Fan"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254
+msgid "Fan speed"
+msgstr "Fan speed"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255
+msgid "time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255
+msgid "Layer time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256
+msgid "Log time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256
+msgid "Layer time (log)"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:257
+msgid "Chrono"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258
+msgid "Vol. flow"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258
+msgid "Volumetric flow rate"
+msgstr "Volumetric flow rate"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:261 src/slic3r/GUI/Plater.cpp:1157
+#: src/slic3r/GUI/Plater.cpp:1161 src/slic3r/GUI/Plater.cpp:1176
+#: src/slic3r/GUI/Plater.cpp:1181 src/libslic3r/PrintConfig.cpp:82
+#: src/libslic3r/PrintConfig.cpp:1143
+msgid "Color"
+msgstr "Color"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:265
+msgid "Show"
+msgstr "Show"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:267 src/slic3r/GUI/GUI_Preview.cpp:288
+msgid "Feature types"
+msgstr "Feature types"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/ExtrusionEntity.cpp:271
+#: src/libslic3r/ExtrusionEntity.cpp:298
+msgid "Perimeter"
+msgstr "Perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/ExtrusionEntity.cpp:272
+#: src/libslic3r/ExtrusionEntity.cpp:300
+msgid "External perimeter"
+msgstr "External perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:273 src/libslic3r/ExtrusionEntity.cpp:273
+#: src/libslic3r/ExtrusionEntity.cpp:302
+msgid "Overhang perimeter"
+msgstr "Overhang perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:274 src/libslic3r/ExtrusionEntity.cpp:274
+#: src/libslic3r/ExtrusionEntity.cpp:304
+msgid "Internal infill"
+msgstr "Internal infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:275 src/libslic3r/ExtrusionEntity.cpp:275
+#: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3149
+msgid "Solid infill"
+msgstr "Solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:276
+#: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3698
+msgid "Top solid infill"
+msgstr "Top solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/ExtrusionEntity.cpp:278
+#: src/libslic3r/ExtrusionEntity.cpp:312
+msgid "Bridge infill"
+msgstr "Bridge infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:278 src/libslic3r/ExtrusionEntity.cpp:279
+#: src/libslic3r/ExtrusionEntity.cpp:314
+msgid "Internal bridge infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:279 src/libslic3r/ExtrusionEntity.cpp:280
+#: src/libslic3r/ExtrusionEntity.cpp:316
+msgid "Thin wall"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:280 src/libslic3r/ExtrusionEntity.cpp:281
+#: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1778
+msgid "Gap fill"
+msgstr "Gap fill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:281 src/libslic3r/ExtrusionEntity.cpp:282
+#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:2987
+msgid "Skirt"
+msgstr "Skirt"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:282 src/libslic3r/ExtrusionEntity.cpp:283
+#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3417
+msgid "Support material"
+msgstr "Support material"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:283 src/libslic3r/ExtrusionEntity.cpp:284
+#: src/libslic3r/ExtrusionEntity.cpp:324
+msgid "Support material interface"
+msgstr "Support material interface"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:283
+msgid "Sup. mat. interface"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:284 src/libslic3r/ExtrusionEntity.cpp:285
+#: src/libslic3r/ExtrusionEntity.cpp:326
+msgid "Wipe tower"
+msgstr "Wipe tower"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:285 src/libslic3r/ExtrusionEntity.cpp:286
+#: src/libslic3r/ExtrusionEntity.cpp:328
+msgid "Mill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1027
+msgid "Retr."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1028
+msgid "Dere."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1029
+msgid "Tool/C"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1030
+msgid "Col/C"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1033
+msgid "Shells"
+msgstr "Shells"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
+msgid "Marker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
+msgid "Tool marker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
+msgid "Legend"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
+msgid "Legend/Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:806 src/slic3r/GUI/Search.cpp:464
+msgid "Use for search"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:458
+msgid "Category"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:809 src/slic3r/GUI/Search.cpp:460
+msgid "Search in English"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:145
+msgid "Arranging"
+msgstr "Arranging"
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:175
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr "Could not arrange model objects! Some geometries may be invalid."
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:181
+msgid "Arranging canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
+msgid "Arranging done."
+msgstr "Arranging done."
+
+#: src/slic3r/GUI/Jobs/Job.cpp:75
+msgid "ERROR: not enough resources to execute a new job."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
+msgid "Searching for optimal orientation"
+msgstr "Searching for optimal orientation"
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
+msgid "Orientation search canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
+msgid "Orientation found."
+msgstr "Orientation found."
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35
+msgid "Choose SLA archive:"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39
+msgid "Import file"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46
+msgid "Import model and profile"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
+msgid "Import profile only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
+msgid "Import model only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59
+msgid "Accurate"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
+msgid "Balanced"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
+msgid "Quick"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
+msgid "Importing SLA archive"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159
+msgid "Importing canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160
+msgid "Importing done."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2341
+msgid "You cannot load SLA project with a multi-part object on the bed"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2342
+#: src/slic3r/GUI/Tab.cpp:3288
+msgid "Please check your object list before preset changing."
+msgstr "Please check your object list before preset changing."
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:34 src/slic3r/GUI/MainFrame.cpp:908
+msgid "Keyboard Shortcuts"
+msgstr "Keyboard Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:97
+msgid "New project, clear plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
+msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
+msgid "Save project (3mf)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
+msgid "Save project as (3mf)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+msgid "(Re)slice"
+msgstr "(Re)slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
+msgid "Import Config from ini/amf/3mf/gcode"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Load Config from ini/amf/3mf/gcode and merge"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/Plater.cpp:764
+#: src/slic3r/GUI/Plater.cpp:5811 src/libslic3r/PrintConfig.cpp:5660
+msgid "Export G-code"
+msgstr "Export G-code"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:5812
+msgid "Send G-code"
+msgstr "Send G-code"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+msgid "Export config"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:752
+msgid "Export to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "Eject SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+msgid "Select all objects"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Deselect all"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+msgid "Delete selected"
+msgstr "Delete selected"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Copy to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Paste from clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Reload plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Select Plater Tab"
+msgstr "Select Plater Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
+msgid "Select Print Settings Tab"
+msgstr "Select Print Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Select Filament Settings Tab"
+msgstr "Select Filament Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
+msgid "Select Printer Settings Tab"
+msgstr "Select Printer Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
+msgid "Switch to 3D"
+msgstr "Switch to 3D"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+msgid "Switch to Preview"
+msgstr "Switch to Preview"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/PrintHostDialogs.cpp:165
+msgid "Print host upload queue"
+msgstr "Print host upload queue"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+msgid "Camera view"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+msgid "Show/Hide object/instance labels"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135 src/slic3r/GUI/Preferences.cpp:12
+msgid "Preferences"
+msgstr "Preferences"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Show keyboard shortcuts list"
+msgstr "Show keyboard shortcuts list"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+msgid "Commands"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Add Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Remove Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Press to select multiple objects\nor move multiple objects with mouse"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+msgid "Press to activate selection rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Press to activate deselection rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+msgid "Arrow Up"
+msgstr "Arrow Up"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+msgid "Move selection 10 mm in positive Y direction"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+msgid "Arrow Down"
+msgstr "Arrow Down"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+msgid "Move selection 10 mm in negative Y direction"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgid "Arrow Left"
+msgstr "Arrow Left"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+msgid "Move selection 10 mm in negative X direction"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+msgid "Arrow Right"
+msgstr "Arrow Right"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+msgid "Move selection 10 mm in positive X direction"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Any arrow"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+msgid "Movement step set to 1 mm"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Movement in camera space"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Page Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Rotate selection 45 degrees CCW"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+msgid "Page Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+msgid "Rotate selection 45 degrees CW"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+msgid "Gizmo move"
+msgstr "Gizmo move"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+msgid "Gizmo scale"
+msgstr "Gizmo scale"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+msgid "Gizmo rotate"
+msgstr "Gizmo rotate"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+msgid "Gizmo cut"
+msgstr "Gizmo cut"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+msgid "Gizmo Place face on bed"
+msgstr "Gizmo Place face on bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
+msgid "Gizmo SLA hollow"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+msgid "Gizmo SLA support points"
+msgstr "Gizmo SLA support points"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+msgid "Unselect gizmo or clear selection"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+msgid "Change camera type (perspective, orthographic)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+msgid "Zoom to Bed"
+msgstr "Zoom to Bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
+msgid "Zoom to selected object\nor all objects in scene, if none selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+msgid "Zoom in"
+msgstr "Zoom in"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
+msgid "Zoom out"
+msgstr "Zoom out"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+msgid "Switch between Editor/Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+msgid "Collapse/Expand the sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+msgid "Show/Hide 3Dconnexion devices settings dialog"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:186 src/slic3r/GUI/MainFrame.cpp:328
+#: src/slic3r/GUI/MainFrame.cpp:340
+msgid "Plater"
+msgstr "Plater"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
+msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
+msgid "Gizmo move: Press to snap by 1mm"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
+msgid "Gizmo scale: Press to snap by 5%"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
+msgid "Gizmo scale: Scale selection to fit print volume"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
+msgid "Gizmo scale: Press to activate one direction scaling"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
+msgid "Gizmo scale: Press to scale selected objects around their own center"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
+msgid "Gizmo rotate: Press to rotate selected objects around their own center"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
+msgid "Gizmos"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
+msgid "Upper Layer"
+msgstr "Upper Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
+msgid "Lower Layer"
+msgstr "Lower Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
+msgid "Show/Hide Legend & Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:209 src/slic3r/GUI/Plater.cpp:4136
+msgid "Preview"
+msgstr "Preview"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+msgid "Move current slider thumb Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+msgid "Move current slider thumb Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
+msgid "Set upper thumb to current slider thumb"
+msgstr "Set upper thumb to current slider thumb"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+msgid "Set lower thumb to current slider thumb"
+msgstr "Set lower thumb to current slider thumb"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
+msgid "Add color change marker for current layer"
+msgstr "Add color change marker for current layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
+msgid "Delete color change marker for current layer"
+msgstr "Delete color change marker for current layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
+msgid "Press to speed up 5 times while moving thumb\nwith arrow keys or mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
+msgid "Layers Slider"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgid "Move current slider thumb Left"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+msgid "Move current slider thumb Right"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
+msgid "Sequential Slider"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
+msgid "Keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:64 src/slic3r/GUI/MainFrame.cpp:1199
+msgid "Open new instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:64 src/slic3r/GUI/MainFrame.cpp:78
+#: src/slic3r/GUI/MainFrame.cpp:1199
+msgid "Open a new PrusaSlicer instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:80
+msgid "G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:1105
+msgid "Open G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:78
+msgid "Open PrusaSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:80
+msgid "Open new G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:155
+msgid "Remember to check for updates at https://github.com/supermerill/SuperSlicer/releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:512
+msgid "based on PrusaSlicer & Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:875
+msgid "SuperSlicer Releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:875
+msgid "Open the SuperSlicer releases page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:877
+msgid "SuperSlicer wiki"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:877
+msgid "Open the SuperSlicer wiki in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:879
+msgid "SuperSlicer website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:879
+msgid "Open the SuperSlicer website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:881
+msgid "Prusa Edition website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:881
+msgid "Open the Prusa Edition website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:887
+msgid "Slic3r Website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:888
+msgid "Open the Slic3r website in your browser"
+msgstr "Open the Slic3r website in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:894
+msgid "System &Info"
+msgstr "System &Info"
+
+#: src/slic3r/GUI/MainFrame.cpp:894
+msgid "Show system information"
+msgstr "Show system information"
+
+#: src/slic3r/GUI/MainFrame.cpp:896
+msgid "Show &Configuration Folder"
+msgstr "Show &Configuration Folder"
+
+#: src/slic3r/GUI/MainFrame.cpp:896
+msgid "Show user configuration folder (datadir)"
+msgstr "Show user configuration folder (datadir)"
+
+#: src/slic3r/GUI/MainFrame.cpp:898
+msgid "Report an I&ssue"
+msgstr "Report an I&ssue"
+
+#: src/slic3r/GUI/MainFrame.cpp:898
+#, possible-c-format
+msgid "Report an issue on %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:902 src/slic3r/GUI/MainFrame.cpp:905
+#, possible-c-format
+msgid "&About %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:902 src/slic3r/GUI/MainFrame.cpp:905
+msgid "Show about dialog"
+msgstr "Show about dialog"
+
+#: src/slic3r/GUI/MainFrame.cpp:908
+msgid "Show the list of the keyboard shortcuts"
+msgstr "Show the list of the keyboard shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:922
+msgid "Iso"
+msgstr "Iso"
+
+#: src/slic3r/GUI/MainFrame.cpp:922
+msgid "Iso View"
+msgstr "Iso View"
+
+#. TRN To be shown in the main menu View->Top
+#. TRN To be shown in Print Settings "Top solid layers"
+#: src/slic3r/GUI/MainFrame.cpp:926 src/libslic3r/PrintConfig.cpp:680
+#: src/libslic3r/PrintConfig.cpp:3368 src/libslic3r/PrintConfig.cpp:3727
+#: src/libslic3r/PrintConfig.cpp:3737
+msgid "Top"
+msgstr "Top"
+
+#: src/slic3r/GUI/MainFrame.cpp:926
+msgid "Top View"
+msgstr "Top View"
+
+#. TRN To be shown in the main menu View->Bottom
+#. TRN To be shown in Print Settings "Bottom solid layers"
+#. TRN To be shown in Print Settings "Top solid layers"
+#: src/slic3r/GUI/MainFrame.cpp:929 src/libslic3r/PrintConfig.cpp:271
+#: src/libslic3r/PrintConfig.cpp:279 src/libslic3r/PrintConfig.cpp:713
+#: src/libslic3r/PrintConfig.cpp:3383
+msgid "Bottom"
+msgstr "Bottom"
+
+#: src/slic3r/GUI/MainFrame.cpp:929
+msgid "Bottom View"
+msgstr "Bottom View"
+
+#: src/slic3r/GUI/MainFrame.cpp:931
+msgid "Front"
+msgstr "Front"
+
+#: src/slic3r/GUI/MainFrame.cpp:931
+msgid "Front View"
+msgstr "Front View"
+
+#: src/slic3r/GUI/MainFrame.cpp:933 src/libslic3r/PrintConfig.cpp:952
+#: src/libslic3r/PrintConfig.cpp:2919
+msgid "Rear"
+msgstr "Rear"
+
+#: src/slic3r/GUI/MainFrame.cpp:933
+msgid "Rear View"
+msgstr "Rear View"
+
+#: src/slic3r/GUI/MainFrame.cpp:935
+msgid "Left"
+msgstr "Left"
+
+#: src/slic3r/GUI/MainFrame.cpp:935
+msgid "Left View"
+msgstr "Left View"
+
+#: src/slic3r/GUI/MainFrame.cpp:937
+msgid "Right"
+msgstr "Right"
+
+#: src/slic3r/GUI/MainFrame.cpp:937
+msgid "Right View"
+msgstr "Right View"
+
+#: src/slic3r/GUI/MainFrame.cpp:950
+msgid "&New Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:950
+msgid "Start a new project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:953
+msgid "&Open Project"
+msgstr "&Open Project"
+
+#: src/slic3r/GUI/MainFrame.cpp:953
+msgid "Open a project file"
+msgstr "Open a project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:958
+msgid "Recent projects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:967
+msgid "The selected project is no longer available.\nDo you want to remove it from the recent projects list?"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1384
+#: src/slic3r/GUI/PrintHostDialogs.cpp:261
+msgid "Error"
+msgstr "Error"
+
+#: src/slic3r/GUI/MainFrame.cpp:992
+msgid "&Save Project"
+msgstr "&Save Project"
+
+#: src/slic3r/GUI/MainFrame.cpp:992
+msgid "Save current project file"
+msgstr "Save current project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
+msgid "Save Project &as"
+msgstr "Save Project &as"
+
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
+msgid "Save current project file as"
+msgstr "Save current project file as"
+
+#: src/slic3r/GUI/MainFrame.cpp:1006
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr "Import STL/OBJ/AM&F/3MF"
+
+#: src/slic3r/GUI/MainFrame.cpp:1006
+msgid "Load a model"
+msgstr "Load a model"
+
+#: src/slic3r/GUI/MainFrame.cpp:1010
+msgid "Import STL (imperial units)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1010
+msgid "Load an model saved with imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1014
+msgid "Import SL1 archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1014
+msgid "Load an SL1 archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1019
+msgid "Import &Config"
+msgstr "Import &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:1019
+msgid "Load exported configuration file"
+msgstr "Load exported configuration file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1022
+msgid "Import Config from &project"
+msgstr "Import Config from &project"
+
+#: src/slic3r/GUI/MainFrame.cpp:1022
+msgid "Load configuration from project file"
+msgstr "Load configuration from project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1026
+msgid "Import Config &Bundle"
+msgstr "Import Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:1026
+msgid "Load presets from a bundle"
+msgstr "Load presets from a bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:1029
+msgid "&Import"
+msgstr "&Import"
+
+#: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1346
+msgid "Export &G-code"
+msgstr "Export &G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:1032
+msgid "Export current plate as G-code"
+msgstr "Export current plate as G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:1036 src/slic3r/GUI/MainFrame.cpp:1347
+msgid "S&end G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1036
+msgid "Send to print current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1040
+msgid "Export G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1040
+msgid "Export current plate as G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1044
+msgid "Export plate as &STL"
+msgstr "Export plate as &STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:1044
+msgid "Export current plate as STL"
+msgstr "Export current plate as STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:1047
+msgid "Export plate as STL &including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1047
+msgid "Export current plate as STL including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Export plate as &AMF"
+msgstr "Export plate as &AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Export current plate as AMF"
+msgstr "Export current plate as AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
+msgid "Export &toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
+msgid "Export toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Export &Config"
+msgstr "Export &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Export current configuration to file"
+msgstr "Export current configuration to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1061
+msgid "Export Config &Bundle"
+msgstr "Export Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:1061
+msgid "Export all presets to file"
+msgstr "Export all presets to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1064
+msgid "Export Config Bundle With Physical Printers"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1064
+msgid "Export all presets including physical printers to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1067
+msgid "&Export"
+msgstr "&Export"
+
+#: src/slic3r/GUI/MainFrame.cpp:1069
+msgid "Ejec&t SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1069
+msgid "Eject SD card / Flash drive after the G-code was exported to it."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1077
+msgid "Quick Slice"
+msgstr "Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:1077
+msgid "Slice a file into a G-code"
+msgstr "Slice a file into a G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Quick Slice and Save As"
+msgstr "Quick Slice and Save As"
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Slice a file into a G-code, save as"
+msgstr "Slice a file into a G-code, save as"
+
+#: src/slic3r/GUI/MainFrame.cpp:1089
+msgid "Repeat Last Quick Slice"
+msgstr "Repeat Last Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:1089
+msgid "Repeat last quick slice"
+msgstr "Repeat last quick slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "(Re)Slice No&w"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "Start new slicing process"
+msgstr "Start new slicing process"
+
+#: src/slic3r/GUI/MainFrame.cpp:1101
+msgid "&Repair STL file"
+msgstr "&Repair STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1101
+msgid "Automatically repair an STL file"
+msgstr "Automatically repair an STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:1105
+msgid "&G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1108 src/slic3r/GUI/MainFrame.cpp:1305
+msgid "&Quit"
+msgstr "&Quit"
+
+#: src/slic3r/GUI/MainFrame.cpp:1108 src/slic3r/GUI/MainFrame.cpp:1305
+#, possible-c-format
+msgid "Quit %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1123
+msgid "&Select all"
+msgstr "&Select all"
+
+#: src/slic3r/GUI/MainFrame.cpp:1124
+msgid "Selects all objects"
+msgstr "Selects all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:1126
+msgid "D&eselect all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1127
+msgid "Deselects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1130
+msgid "&Delete selected"
+msgstr "&Delete selected"
+
+#: src/slic3r/GUI/MainFrame.cpp:1131
+msgid "Deletes the current selection"
+msgstr "Deletes the current selection"
+
+#: src/slic3r/GUI/MainFrame.cpp:1133
+msgid "Delete &all"
+msgstr "Delete &all"
+
+#: src/slic3r/GUI/MainFrame.cpp:1134
+msgid "Deletes all objects"
+msgstr "Deletes all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:1138
+msgid "&Undo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1141
+msgid "&Redo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1146
+msgid "&Copy"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1147
+msgid "Copy selection to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1149
+msgid "&Paste"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1150
+msgid "Paste clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1154
+msgid "Re&load from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1155
+msgid "Reload the plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1159
+msgid "Searc&h"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1160
+msgid "Search in settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1168
+msgid "&Plater Tab"
+msgstr "&Plater Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:1168
+msgid "Show the plater"
+msgstr "Show the plater"
+
+#: src/slic3r/GUI/MainFrame.cpp:1173
+msgid "P&rint Settings Tab"
+msgstr "P&rint Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:1173
+msgid "Show the print settings"
+msgstr "Show the print settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:1176 src/slic3r/GUI/MainFrame.cpp:1349
+msgid "&Filament Settings Tab"
+msgstr "&Filament Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:1176
+msgid "Show the filament settings"
+msgstr "Show the filament settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:1180
+msgid "Print&er Settings Tab"
+msgstr "Print&er Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:1180
+msgid "Show the printer settings"
+msgstr "Show the printer settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
+msgid "3&D"
+msgstr "3&D"
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
+msgid "Show the 3D editing view"
+msgstr "Show the 3D editing view"
+
+#: src/slic3r/GUI/MainFrame.cpp:1189
+msgid "Pre&view"
+msgstr "Pre&view"
+
+#: src/slic3r/GUI/MainFrame.cpp:1189
+msgid "Show the 3D slices preview"
+msgstr "Show the 3D slices preview"
+
+#: src/slic3r/GUI/MainFrame.cpp:1195
+msgid "Print &Host Upload Queue"
+msgstr "Print &Host Upload Queue"
+
+#: src/slic3r/GUI/MainFrame.cpp:1195
+msgid "Display the Print Host Upload Queue window"
+msgstr "Display the Print Host Upload Queue window"
+
+#: src/slic3r/GUI/MainFrame.cpp:1210
+msgid "Show &labels"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1210
+msgid "Show object/instance labels in 3D scene"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1213
+msgid "&Collapse sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1213 src/slic3r/GUI/Plater.cpp:2231
+msgid "Collapse sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1223
+msgid "Introduction"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1223
+msgid "How to use this menu and calibrations."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "Bed/Extruder levelling"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "Create a test print to help you to level your printer bed."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "Filament Flow calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "Create a test print to help you to set your filament extrusion multiplier."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1231
+msgid "Filament temperature calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1231
+msgid "Create a test print to help you to set your filament temperature."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1233
+msgid "Extruder retraction calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1233
+msgid "Create a test print to help you to set your retraction length."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1236
+msgid "Bridge flow calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1236
+msgid "Create a test print to help you to set your bridge flow ratio."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1238
+msgid "Ironing pattern calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1238
+msgid "Create a test print to help you to set your over-bridge flow ratio and ironing pattern."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1241
+msgid "Calibration cube"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1241
+msgid "Print a calibration cube, for various calibration goals."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1250
+msgid "FreeCad python script"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1250
+msgid "Create an object by writing little easy script."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1252
+msgid "Script help page"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1252
+msgid "How to use the FreeCad python script window."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1264 src/slic3r/GUI/MainFrame.cpp:1320
+msgid "&File"
+msgstr "&File"
+
+#: src/slic3r/GUI/MainFrame.cpp:1265
+msgid "&Edit"
+msgstr "&Edit"
+
+#: src/slic3r/GUI/MainFrame.cpp:1266
+msgid "&Window"
+msgstr "&Window"
+
+#: src/slic3r/GUI/MainFrame.cpp:1267 src/slic3r/GUI/MainFrame.cpp:1321
+msgid "&View"
+msgstr "&View"
+
+#: src/slic3r/GUI/MainFrame.cpp:1268
+msgid "C&alibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1269
+msgid "&Generate"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1272 src/slic3r/GUI/MainFrame.cpp:1324
+msgid "&Help"
+msgstr "&Help"
+
+#: src/slic3r/GUI/MainFrame.cpp:1294
+msgid "&Open G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1294
+msgid "Open a G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Open &SuperSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Open SuperSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1346
+msgid "E&xport"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1347
+msgid "S&end to print"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1349
+msgid "Mate&rial Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1372
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/MainFrame.cpp:1383
+msgid "No previously sliced file."
+msgstr "No previously sliced file."
+
+#: src/slic3r/GUI/MainFrame.cpp:1389
+msgid "Previously sliced file ("
+msgstr "Previously sliced file ("
+
+#: src/slic3r/GUI/MainFrame.cpp:1389
+msgid ") not found."
+msgstr ") not found."
+
+#: src/slic3r/GUI/MainFrame.cpp:1390
+msgid "File Not Found"
+msgstr "File Not Found"
+
+#: src/slic3r/GUI/MainFrame.cpp:1425
+#, possible-c-format
+msgid "Save %s file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1425
+msgid "SVG"
+msgstr "SVG"
+
+#: src/slic3r/GUI/MainFrame.cpp:1425
+msgid "G-code"
+msgstr "G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:1437
+msgid "Save zip file as:"
+msgstr "Save zip file as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1446 src/slic3r/GUI/Plater.cpp:2993
+#: src/slic3r/GUI/Plater.cpp:5346 src/slic3r/GUI/Tab.cpp:4229
+msgid "Slicing"
+msgstr "Slicing"
+
+#. TRN "Processing input_file_basename"
+#: src/slic3r/GUI/MainFrame.cpp:1448
+#, possible-c-format
+msgid "Processing %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1471
+#, possible-c-format
+msgid "%1% was successfully sliced."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1473
+msgid "Slicing Done!"
+msgstr "Slicing Done!"
+
+#: src/slic3r/GUI/MainFrame.cpp:1488
+msgid "Select the STL file to repair:"
+msgstr "Select the STL file to repair:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1498
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr "Save OBJ file (less prone to coordinate errors than STL) as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1510
+msgid "Your file was repaired."
+msgstr "Your file was repaired."
+
+#: src/slic3r/GUI/MainFrame.cpp:1510 src/libslic3r/PrintConfig.cpp:5763
+msgid "Repair"
+msgstr "Repair"
+
+#: src/slic3r/GUI/MainFrame.cpp:1524
+msgid "Save configuration as:"
+msgstr "Save configuration as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1543 src/slic3r/GUI/MainFrame.cpp:1605
+msgid "Select configuration to load:"
+msgstr "Select configuration to load:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1579
+msgid "Save presets bundle as:"
+msgstr "Save presets bundle as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:1626
+#, possible-c-format
+msgid "%d presets successfully imported."
+msgstr "%d presets successfully imported."
+
+#: src/slic3r/GUI/Mouse3DController.cpp:462
+msgid "3Dconnexion settings"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:473
+msgid "Device:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:478
+msgid "Speed:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:481
+#: src/slic3r/GUI/Mouse3DController.cpp:502
+msgid "Translation"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:493
+#: src/slic3r/GUI/Mouse3DController.cpp:502
+msgid "Zoom"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:499
+msgid "Deadzone:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:514
+msgid "Options:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:517
+msgid "Swap Y/Z axes"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:73
+#, possible-c-format
+msgid "%s error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:74
+#, possible-c-format
+msgid "%s has encountered an error"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:395
+msgid "3D Mouse disconnected."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:398
+msgid "Configuration update is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:398
+msgid "See more."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:400
+msgid "New version is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:400
+msgid "See Releases page."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:389
+#: src/slic3r/GUI/NotificationManager.cpp:399
+msgid "More"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:692
+#: src/slic3r/GUI/NotificationManager.cpp:963
+msgid "Export G-Code."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:736
+msgid "Open Folder."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:774
+msgid "Eject drive"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:882
+#: src/slic3r/GUI/NotificationManager.cpp:898
+#: src/slic3r/GUI/NotificationManager.cpp:909
+msgid "ERROR:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:887
+#: src/slic3r/GUI/NotificationManager.cpp:902
+#: src/slic3r/GUI/NotificationManager.cpp:917
+msgid "WARNING:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:966
+msgid "Slicing finished."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1009
+msgid "Exporting finished."
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:58
+msgid "Instances"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:62
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:225
+#, possible-c-format
+msgid "Instance %d"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:4074
+#: src/slic3r/GUI/Tab.cpp:4158
+msgid "Layers"
+msgstr "Layers"
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
+msgid "Range"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:259
+#, possible-c-format
+msgid "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:262
+msgid "You may need to update your graphics card driver."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:265
+msgid "As a workaround, you may run PrusaSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw_renderer parameter."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:267
+msgid "Unsupported OpenGL version"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:275
+#, possible-c-format
+msgid "Unable to load the following shaders:\n%s"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:276
+msgid "Error loading shaders"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51
+msgid "Delete this preset from this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81
+msgid "This printer will be shown in the presets list as"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155
+msgid "Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161
+msgid "Type here the name of your printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172
+msgid "Descriptive name for the printer"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
+msgid "Add preset for this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205
+msgid "Print Host upload"
+msgstr "Print Host upload"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
+msgid "Test"
+msgstr "Test"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:342
+msgid "Could not get a valid Printer Host reference"
+msgstr "Could not get a valid Printer Host reference"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:354
+msgid "Success!"
+msgstr "Success!"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
+msgid "Refresh Printers"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:391
+msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate."
+msgstr "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate."
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:401
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:402
+msgid "Open CA certificate file"
+msgstr "Open CA certificate file"
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:430
+#: src/libslic3r/PrintConfig.cpp:163 src/libslic3r/PrintConfig.cpp:2487
+msgid "HTTPS CA File"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:431
+#, possible-c-format
+msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432
+msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:584
+msgid "The supplied name is empty. It can't be saved."
+msgstr "The supplied name is empty. It can't be saved."
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:588
+msgid "You should to change a name of your printer device. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:596
+#, possible-c-format
+msgid "Printer with name \"%1%\" already exists."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:597
+msgid "Replace?"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:620
+#, possible-c-format
+msgid "Following printer preset(s) is duplicated:%1%The above preset for printer \"%2%\" will be used just once."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:666
+msgid "It's not possible to delete the last related preset for the printer."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
+msgid "Infornation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:163
+msgid "Volume"
+msgstr "Volume"
+
+#: src/slic3r/GUI/Plater.cpp:164
+msgid "Facets"
+msgstr "Facets"
+
+#: src/slic3r/GUI/Plater.cpp:165
+msgid "Materials"
+msgstr "Materials"
+
+#: src/slic3r/GUI/Plater.cpp:168
+msgid "Manifold"
+msgstr "Manifold"
+
+#: src/slic3r/GUI/Plater.cpp:218
+msgid "Sliced Info"
+msgstr "Sliced Info"
+
+#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1145
+msgid "Used Filament (m)"
+msgstr "Used Filament (m)"
+
+#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1167
+msgid "Used Filament (mm³)"
+msgstr "Used Filament (mm³)"
+
+#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1172
+#: src/slic3r/GUI/Plater.cpp:1186
+msgid "Used Filament (g)"
+msgstr "Used Filament (g)"
+
+#: src/slic3r/GUI/Plater.cpp:240
+msgid "Used Material (unit)"
+msgstr "Used Material (unit)"
+
+#: src/slic3r/GUI/Plater.cpp:241
+msgid "Cost (money)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:243
+msgid "Number of tool changes"
+msgstr "Number of tool changes"
+
+#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4162
+#: src/slic3r/GUI/Tab.cpp:4163
+msgid "Supports"
+msgstr "Supports"
+
+#: src/slic3r/GUI/Plater.cpp:360
+msgid "Select what kind of support do you need"
+msgstr "Select what kind of support do you need"
+
+#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:3343
+#: src/libslic3r/PrintConfig.cpp:4575
+msgid "Support on build plate only"
+msgstr "Support on build plate only"
+
+#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:486
+msgid "For support enforcers only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:364
+msgid "Everywhere"
+msgstr "Everywhere"
+
+#: src/slic3r/GUI/Plater.cpp:396
+msgid "Brim"
+msgstr "Brim"
+
+#: src/slic3r/GUI/Plater.cpp:398
+msgid "This flag enables the brim that will be printed around each object on the first layer."
+msgstr "This flag enables the brim that will be printed around each object on the first layer."
+
+#: src/slic3r/GUI/Plater.cpp:406
+msgid "Purging volumes"
+msgstr "Purging volumes"
+
+#: src/slic3r/GUI/Plater.cpp:497 src/slic3r/GUI/Tab.cpp:4203
+#: src/slic3r/GUI/Tab.cpp:4204 src/slic3r/GUI/Tab.cpp:4275
+msgid "Pad"
+msgstr "Pad"
+
+#: src/slic3r/GUI/Plater.cpp:500
+msgid "Select what kind of pad do you need"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:502
+msgid "Below object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:503
+msgid "Around object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:689
+msgid "SLA print settings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:750 src/slic3r/GUI/Plater.cpp:5812
+msgid "Send to printer"
+msgstr "Send to printer"
+
+#: src/slic3r/GUI/Plater.cpp:765 src/slic3r/GUI/Plater.cpp:2993
+#: src/slic3r/GUI/Plater.cpp:5349
+msgid "Slice now"
+msgstr "Slice now"
+
+#: src/slic3r/GUI/Plater.cpp:920
+msgid "Hold Shift to Slice & Export G-code"
+msgstr "Hold Shift to Slice & Export G-code"
+
+#: src/slic3r/GUI/Plater.cpp:1065
+#, possible-c-format
+msgid "%d (%d shells)"
+msgstr "%d (%d shells)"
+
+#: src/slic3r/GUI/Plater.cpp:1070
+#, possible-c-format
+msgid "Auto-repaired (%d errors)"
+msgstr "Auto-repaired (%d errors)"
+
+#: src/slic3r/GUI/Plater.cpp:1073
+#, possible-c-format
+msgid "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d facets reversed, %d backwards edges"
+msgstr "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d facets reversed, %d backwards edges"
+
+#: src/slic3r/GUI/Plater.cpp:1083
+msgid "Yes"
+msgstr "Yes"
+
+#: src/slic3r/GUI/Plater.cpp:1104
+msgid "Used Material (ml)"
+msgstr "Used Material (ml)"
+
+#: src/slic3r/GUI/Plater.cpp:1107
+msgid "object(s)"
+msgstr "object(s)"
+
+#: src/slic3r/GUI/Plater.cpp:1107
+msgid "supports and pad"
+msgstr "supports and pad"
+
+#: src/slic3r/GUI/Plater.cpp:1145
+msgid "Used Filament (in)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
+msgid "objects"
+msgstr "objects"
+
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
+msgid "wipe tower"
+msgstr "wipe tower"
+
+#: src/slic3r/GUI/Plater.cpp:1167
+msgid "Used Filament (in³)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1226 src/libslic3r/PrintConfig.cpp:1463
+#: src/libslic3r/PrintConfig.cpp:4390 src/libslic3r/PrintConfig.cpp:4391
+msgid "Cost"
+msgstr "Cost"
+
+#: src/slic3r/GUI/Plater.cpp:1244
+msgid "normal mode"
+msgstr "normal mode"
+
+#: src/slic3r/GUI/Plater.cpp:1254
+msgid "stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1419
+#, possible-c-format
+msgid "%s - Drop project file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1426
+msgid "Open as project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1427
+msgid "Import geometry only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1428
+msgid "Import config only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1431
+msgid "Select an action to apply to the file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1432
+msgid "Action"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1440
+msgid "Don't show again"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1479
+msgid "You can open only one .gcode file at a time."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1480
+msgid "Drag and drop G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1534 src/slic3r/GUI/Plater.cpp:4735
+msgid "Import Object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1556
+msgid "Load File"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1561
+msgid "Load Files"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1663
+msgid "Fill bed"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1669
+msgid "Optimize Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1675
+msgid "Import SLA archive"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2127
+#, possible-c-format
+msgid "Successfully unmounted. The device %s(%s) can now be safely removed from the computer."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2130
+#, possible-c-format
+msgid "Ejecting of device %s(%s) has failed."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2149
+msgid "New Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2230
+msgid "Expand sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2303
+msgid "Loading"
+msgstr "Loading"
+
+#: src/slic3r/GUI/Plater.cpp:2313
+msgid "Loading file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2407
+msgid "This file contains several objects positioned at multiple heights.\nInstead of considering them as multiple objects, should I consider\nthis file as a single object having multiple parts?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2410 src/slic3r/GUI/Plater.cpp:2463
+msgid "Multi-part object detected"
+msgstr "Multi-part object detected"
+
+#: src/slic3r/GUI/Plater.cpp:2417
+msgid "This file cannot be loaded in a simple mode. Do you want to switch to an advanced mode?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2418
+msgid "Detected advanced data"
+msgstr "Detected advanced data"
+
+#: src/slic3r/GUI/Plater.cpp:2440
+#, possible-c-format
+msgid "You can't to add the object(s) from %s because of one or some of them is(are) multi-part"
+msgstr "You can't to add the object(s) from %s because of one or some of them is(are) multi-part"
+
+#: src/slic3r/GUI/Plater.cpp:2460
+msgid "Multiple objects were loaded for a multi-material printer.\nInstead of considering them as multiple objects, should I consider\nthese files to represent a single object having multiple parts?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2477
+msgid "Loaded"
+msgstr "Loaded"
+
+#: src/slic3r/GUI/Plater.cpp:2579
+msgid "Your object appears to be too large, so it was automatically scaled down to fit your print bed."
+msgstr "Your object appears to be too large, so it was automatically scaled down to fit your print bed."
+
+#: src/slic3r/GUI/Plater.cpp:2580
+msgid "Object too large?"
+msgstr "Object too large?"
+
+#: src/slic3r/GUI/Plater.cpp:2642
+msgid "Export STL file:"
+msgstr "Export STL file:"
+
+#: src/slic3r/GUI/Plater.cpp:2649
+msgid "Export AMF file:"
+msgstr "Export AMF file:"
+
+#: src/slic3r/GUI/Plater.cpp:2655
+msgid "Save file as:"
+msgstr "Save file as:"
+
+#: src/slic3r/GUI/Plater.cpp:2661
+msgid "Export OBJ file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2757
+msgid "Delete Object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2768
+msgid "Reset Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2840
+msgid "The selected object can't be split because it contains more than one volume/material."
+msgstr "The selected object can't be split because it contains more than one volume/material."
+
+#: src/slic3r/GUI/Plater.cpp:2851
+msgid "Split to Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2977 src/slic3r/GUI/Plater.cpp:3661
+msgid "Invalid data"
+msgstr "Invalid data"
+
+#: src/slic3r/GUI/Plater.cpp:2987
+msgid "Ready to slice"
+msgstr "Ready to slice"
+
+#: src/slic3r/GUI/Plater.cpp:3025 src/slic3r/GUI/PrintHostDialogs.cpp:262
+msgid "Cancelling"
+msgstr "Cancelling"
+
+#: src/slic3r/GUI/Plater.cpp:3044
+msgid "Another export job is currently running."
+msgstr "Another export job is currently running."
+
+#: src/slic3r/GUI/Plater.cpp:3161
+msgid "Please select the file to reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3196
+msgid "It is not allowed to change the file to reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3196
+msgid "Do you want to retry"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3214
+msgid "Reload from:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3305
+msgid "Unable to reload:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3310
+msgid "Error during reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3329
+msgid "Reload all from disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3350
+msgid "Fix Throught NetFabb"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3619
+msgid "There are active warnings concerning sliced models:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3630
+msgid "generated warnings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/PrintHostDialogs.cpp:263
+msgid "Cancelled"
+msgstr "Cancelled"
+
+#: src/slic3r/GUI/Plater.cpp:3933 src/slic3r/GUI/Plater.cpp:3957
+msgid "Remove the selected object"
+msgstr "Remove the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:3942
+msgid "Add one more instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3944
+msgid "Remove one instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3946
+msgid "Set number of instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3946
+msgid "Change the number of instances of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3948
+msgid "Fill bed with instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3948
+msgid "Fill the remaining area of bed with instances of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3967
+msgid "Reload the selected object from disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3970
+msgid "Export the selected object as STL file"
+msgstr "Export the selected object as STL file"
+
+#: src/slic3r/GUI/Plater.cpp:4001
+msgid "Along X axis"
+msgstr "Along X axis"
+
+#: src/slic3r/GUI/Plater.cpp:4001
+msgid "Mirror the selected object along the X axis"
+msgstr "Mirror the selected object along the X axis"
+
+#: src/slic3r/GUI/Plater.cpp:4003
+msgid "Along Y axis"
+msgstr "Along Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:4003
+msgid "Mirror the selected object along the Y axis"
+msgstr "Mirror the selected object along the Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:4005
+msgid "Along Z axis"
+msgstr "Along Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:4005
+msgid "Mirror the selected object along the Z axis"
+msgstr "Mirror the selected object along the Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:4008
+msgid "Mirror"
+msgstr "Mirror"
+
+#: src/slic3r/GUI/Plater.cpp:4008
+msgid "Mirror the selected object"
+msgstr "Mirror the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:4020
+msgid "To objects"
+msgstr "To objects"
+
+#: src/slic3r/GUI/Plater.cpp:4020 src/slic3r/GUI/Plater.cpp:4040
+msgid "Split the selected object into individual objects"
+msgstr "Split the selected object into individual objects"
+
+#: src/slic3r/GUI/Plater.cpp:4022
+msgid "To parts"
+msgstr "To parts"
+
+#: src/slic3r/GUI/Plater.cpp:4022 src/slic3r/GUI/Plater.cpp:4058
+msgid "Split the selected object into individual sub-parts"
+msgstr "Split the selected object into individual sub-parts"
+
+#: src/slic3r/GUI/Plater.cpp:4025 src/slic3r/GUI/Plater.cpp:4040
+#: src/slic3r/GUI/Plater.cpp:4058 src/libslic3r/PrintConfig.cpp:5787
+msgid "Split"
+msgstr "Split"
+
+#: src/slic3r/GUI/Plater.cpp:4025
+msgid "Split the selected object"
+msgstr "Split the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:4047
+msgid "Optimize orientation"
+msgstr "Optimize orientation"
+
+#: src/slic3r/GUI/Plater.cpp:4048
+msgid "Optimize the rotation of the object for better print results."
+msgstr "Optimize the rotation of the object for better print results."
+
+#: src/slic3r/GUI/Plater.cpp:4128
+msgid "3D editor view"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4500
+#, possible-c-format
+msgid "%1% printer was active at the time the target Undo / Redo snapshot was taken. Switching to %1% printer requires reloading of %1% presets."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4707
+msgid "Load Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4739
+msgid "Import Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4808
+msgid "The selected file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4808
+msgid "does not contain valid gcode."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4809
+msgid "Error while loading .gcode file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4863
+msgid "All objects will be removed, continue?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4871
+msgid "Delete Selected Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4879
+msgid "Increase Instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4913
+msgid "Decrease Instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4944
+msgid "Enter the number of copies:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4945
+msgid "Copies of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4949
+#, possible-c-format
+msgid "Set numbers of copies to %d"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5015
+msgid "Cut by Plane"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5069
+msgid "Save G-code file as:"
+msgstr "Save G-code file as:"
+
+#: src/slic3r/GUI/Plater.cpp:5069
+msgid "Save SL1 file as:"
+msgstr "Save SL1 file as:"
+
+#: src/slic3r/GUI/Plater.cpp:5216
+#, possible-c-format
+msgid "STL file exported to %s"
+msgstr "STL file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:5233
+#, possible-c-format
+msgid "AMF file exported to %s"
+msgstr "AMF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:5236
+#, possible-c-format
+msgid "Error exporting AMF file %s"
+msgstr "Error exporting AMF file %s"
+
+#: src/slic3r/GUI/Plater.cpp:5277
+#, possible-c-format
+msgid "3MF file exported to %s"
+msgstr "3MF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:5282
+#, possible-c-format
+msgid "Error exporting 3MF file %s"
+msgstr "Error exporting 3MF file %s"
+
+#: src/slic3r/GUI/Plater.cpp:5811
+msgid "Export"
+msgstr "Export"
+
+#: src/slic3r/GUI/Plater.cpp:5906
+msgid "Paste From Clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:24
+msgid "General"
+msgstr "General"
+
+#: src/slic3r/GUI/Preferences.cpp:48
+msgid "Remember output directory"
+msgstr "Remember output directory"
+
+#: src/slic3r/GUI/Preferences.cpp:50
+msgid "If this is enabled, Slic3r will prompt the last output directory instead of the one containing the input files."
+msgstr "If this is enabled, Slic3r will prompt the last output directory instead of the one containing the input files."
+
+#: src/slic3r/GUI/Preferences.cpp:56
+msgid "Auto-center parts"
+msgstr "Auto-center parts"
+
+#: src/slic3r/GUI/Preferences.cpp:58
+msgid "If this is enabled, Slic3r will auto-center objects around the print bed center."
+msgstr "If this is enabled, Slic3r will auto-center objects around the print bed center."
+
+#: src/slic3r/GUI/Preferences.cpp:64
+msgid "Background processing"
+msgstr "Background processing"
+
+#: src/slic3r/GUI/Preferences.cpp:66
+msgid "If this is enabled, Slic3r will pre-process objects as soon as they're loaded in order to save time when exporting G-code."
+msgstr "If this is enabled, Slic3r will pre-process objects as soon as they're loaded in order to save time when exporting G-code."
+
+#: src/slic3r/GUI/Preferences.cpp:75
+msgid "If enabled, SuperSlicer will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:81
+msgid "Export sources full pathnames to 3mf and amf"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:83
+msgid "If enabled, allows the Reload from disk command to automatically find and load the files when invoked."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:91
+msgid "If enabled, Slic3r downloads updates of built-in system presets in the background. These updates are downloaded into a separate temporary location. When a new preset version becomes available it is offered at application startup."
+msgstr "If enabled, Slic3r downloads updates of built-in system presets in the background. These updates are downloaded into a separate temporary location. When a new preset version becomes available it is offered at application startup."
+
+#: src/slic3r/GUI/Preferences.cpp:96
+msgid "Suppress \" - default - \" presets"
+msgstr "Suppress \" - default - \" presets"
+
+#: src/slic3r/GUI/Preferences.cpp:98
+msgid "Suppress \" - default - \" presets in the Print / Filament / Printer selections once there are any other valid presets available."
+msgstr "Suppress \" - default - \" presets in the Print / Filament / Printer selections once there are any other valid presets available."
+
+#: src/slic3r/GUI/Preferences.cpp:104
+msgid "Show incompatible print and filament presets"
+msgstr "Show incompatible print and filament presets"
+
+#: src/slic3r/GUI/Preferences.cpp:106
+msgid "When checked, the print and filament presets are shown in the preset editor even if they are marked as incompatible with the active printer"
+msgstr "When checked, the print and filament presets are shown in the preset editor even if they are marked as incompatible with the active printer"
+
+#: src/slic3r/GUI/Preferences.cpp:112
+msgid "Main GUI always in expert mode"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:114
+msgid "If enabled, the gui will be in expert mode even if the simple or advanced mode is selected (but not the setting tabs)."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:119
+msgid "Show drop project dialog"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:121
+msgid "When checked, whenever dragging and dropping a project file on the application, shows a dialog asking to select the action to take on the file to load."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:126 src/libslic3r/PrintConfig.cpp:5814
+msgid "Single instance mode"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:129
+msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:131
+msgid "If this is enabled, when starting PrusaSlicer and another instance of the same PrusaSlicer is already running, that instance will be reactivated instead."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:139
+msgid "Use Retina resolution for the 3D scene"
+msgstr "Use Retina resolution for the 3D scene"
+
+#: src/slic3r/GUI/Preferences.cpp:141
+msgid "If enabled, the 3D scene will be rendered in Retina resolution. If you are experiencing 3D performance problems, disabling this option may help."
+msgstr "If enabled, the 3D scene will be rendered in Retina resolution. If you are experiencing 3D performance problems, disabling this option may help."
+
+#: src/slic3r/GUI/Preferences.cpp:158
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
+msgid "Ask for unsaved changes when closing application"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:160
+msgid "When closing the application, always ask for unsaved changes"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:165
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+msgid "Ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:167
+msgid "Always ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:173 src/slic3r/GUI/Preferences.cpp:175
+msgid "Show splash screen"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:182
+msgid "Paths"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:187
+msgid "FreeCAD path"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:189
+msgid "If it point to a valid freecad instance (the bin directory or the python executable), you can use the built-in python script to quickly generate geometry."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:197
+msgid "Camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:203
+msgid "Use perspective camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:205
+msgid "If enabled, use perspective camera. If not enabled, use orthographic camera."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:210
+msgid "Use free camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:212
+msgid "If enabled, use free camera. If not enabled, use constrained camera."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:217
+msgid "Reverse direction of zoom with mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:219
+msgid "If enabled, reverses the direction of zoom with mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:226
+msgid "GUI"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:237
+msgid "Show sidebar collapse/expand button"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:239
+msgid "If enabled, the button for the collapse sidebar will be appeared in top right corner of the 3D Scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:244
+msgid "Use custom size for toolbar icons"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:246
+msgid "If enabled, you can change size of toolbar icons manually."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:252
+msgid "Sequential slider applied only to top layer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:254
+msgid "If enabled, changes made using the sequential slider, in preview, apply only to gcode top layer. If disabled, changes made using the sequential slider, in preview, apply to the whole gcode."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:260
+msgid "Suppress to open hyperlink in browser"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:262
+msgid "If enabled, the descriptions of configuration parameters in settings tabs woldn't work as hyperlinks. If disabled, the descriptions of configuration parameters in settings tabs will work as hyperlinks."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:279
+msgid "Render"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:285
+msgid "Use environment map"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:287
+msgid "If enabled, renders object using the environment map."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:320
+#, possible-c-format
+msgid "You need to restart %s to make the changes effective."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:397
+msgid "Icon size in a respect to the default size"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:412
+msgid "Select toolbar icon size in respect to the default one."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:443
+msgid "Old regular layout with the tab bar"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:444
+msgid "New layout, access via settings button in the top menu"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:445
+msgid "Settings in non-modal window"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:454
+msgid "Layout Options"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:188
+#: src/slic3r/GUI/PresetComboBoxes.cpp:226
+#: src/slic3r/GUI/PresetComboBoxes.cpp:752
+#: src/slic3r/GUI/PresetComboBoxes.cpp:802
+#: src/slic3r/GUI/PresetComboBoxes.cpp:916
+#: src/slic3r/GUI/PresetComboBoxes.cpp:960
+msgid "System presets"
+msgstr "System presets"
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:230
+#: src/slic3r/GUI/PresetComboBoxes.cpp:806
+#: src/slic3r/GUI/PresetComboBoxes.cpp:964
+msgid "User presets"
+msgstr "User presets"
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:241
+msgid "Incompatible presets"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:276
+#, possible-c-format
+msgid "Are you sure you want to delete \"%1%\" printer?"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:278
+msgid "Delete Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:615
+msgid "Click to edit preset"
+msgstr "Click to edit preset"
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:671
+#: src/slic3r/GUI/PresetComboBoxes.cpp:701
+msgid "Add/Remove presets"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:676
+#: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:3040
+msgid "Add physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:690
+msgid "Edit preset"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:3040
+msgid "Edit physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:697
+msgid "Delete physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:817
+#: src/slic3r/GUI/PresetComboBoxes.cpp:978
+msgid "Physical printers"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:841
+msgid "Add/Remove filaments"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:843
+msgid "Add/Remove materials"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:845
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1002
+msgid "Add/Remove printers"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:43
+#, possible-c-format
+msgid "will run at %1%%% by default"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:46 src/slic3r/GUI/PresetHints.cpp:72
+#: src/slic3r/GUI/PresetHints.cpp:74
+#, possible-c-format
+msgid "at %1%%% over external perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:49 src/slic3r/GUI/PresetHints.cpp:77
+#, possible-c-format
+msgid "at %1%%% over top fill surfaces"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:52 src/slic3r/GUI/PresetHints.cpp:80
+#: src/slic3r/GUI/PresetHints.cpp:82
+#, possible-c-format
+msgid "at %1%%% over bridges"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:55 src/slic3r/GUI/PresetHints.cpp:85
+#: src/slic3r/GUI/PresetHints.cpp:100
+#, possible-c-format
+msgid "except for the first %1% layers where the fan is disabled"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:57 src/slic3r/GUI/PresetHints.cpp:87
+#: src/slic3r/GUI/PresetHints.cpp:102
+msgid "except for the first layer where the fan is disabled"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:60
+msgid "will be turned off by default."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:67
+#, possible-c-format
+msgid "\n\nIf estimated layer time is below ~%1%s, but still greater than ~%2%s, fan will run at a proportionally increasing speed between %3%%% and %4%%%"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:74 src/slic3r/GUI/PresetHints.cpp:82
+msgid "if it's above the current computed fan speed value"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:93
+#, possible-c-format
+msgid "\n\nIf estimated layer time is below ~%1%s"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:96
+#, possible-c-format
+msgid "fan will run by default to %1%%%"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:107
+#, possible-c-format
+msgid "print speed will be reduced so that no less than %1%s are spent on that layer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:111
+#, possible-c-format
+msgid "(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:114
+#, possible-c-format
+msgid "(however, speed will never be reduced below %1%mm/s)"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:236
+msgid "external perimeters"
+msgstr "external perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:245
+msgid "perimeters"
+msgstr "perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:254
+msgid "infill"
+msgstr "infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:264
+msgid "solid infill"
+msgstr "solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:272
+msgid "top solid infill"
+msgstr "top solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:283
+msgid "support"
+msgstr "support"
+
+#: src/slic3r/GUI/PresetHints.cpp:293
+msgid "support interface"
+msgstr "support interface"
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "First layer volumetric"
+msgstr "First layer volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "Bridging volumetric"
+msgstr "Bridging volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "Volumetric"
+msgstr "Volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:300
+msgid "flow rate is maximized"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:303
+msgid "by the print profile maximum"
+msgstr "by the print profile maximum"
+
+#: src/slic3r/GUI/PresetHints.cpp:304
+msgid "when printing"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:305
+msgid "with a volumetric rate"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:309
+#, possible-c-format
+msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:327
+msgid "Recommended object min thin wall thickness: Not available due to invalid layer height."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:346
+#, possible-c-format
+msgid "Recommended object min (thick) wall thickness for layer height %.2f and"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:347 src/slic3r/GUI/PresetHints.cpp:352
+#, possible-c-format
+msgid "%d perimeter: %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:357
+msgid "Recommended object thin wall thickness: Not available due to excessively small extrusion width."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:381
+msgid "Ideally, the spacing between two extrusions shouldn't be lower than the nozzle diameter. Below are the extrusion widths for a spacing equal to the nozzle diameter.\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:382
+msgid "Recommended min extrusion width for the first layer (with a first layer height of %1%) is %2$.3f mm (or %3%%%)\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:384
+msgid "Recommended min extrusion width for other layers (with a layer height of %1%) is %2$.3f mm (or %3%%%).\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:413
+msgid "Top / bottom shell thickness hint: Not available due to invalid layer height."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:426
+#, possible-c-format
+msgid "Top shell is %1% mm thick for layer height %2% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:429
+#, possible-c-format
+msgid "Minimum top shell thickness is %1% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:432
+msgid "Top is open."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:445
+#, possible-c-format
+msgid "Bottom shell is %1% mm thick for layer height %2% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:448
+#, possible-c-format
+msgid "Minimum bottom shell thickness is %1% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:451
+msgid "Bottom is open."
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
+msgid "Send G-Code to printer host"
+msgstr "Send G-Code to printer host"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
+msgid "Upload to Printer Host with the following filename:"
+msgstr "Upload to Printer Host with the following filename:"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:36
+msgid "Start printing after upload"
+msgstr "Start printing after upload"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:44
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr "Use forward slashes ( / ) as a directory separator if needed."
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:57
+msgid "Group"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
+msgid "ID"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:177
+msgid "Progress"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:178
+msgid "Status"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:179
+msgid "Host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:180
+msgid "Filename"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:181
+msgid "Error Message"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:184
+msgid "Cancel selected"
+msgstr "Cancel selected"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:186
+msgid "Show error message"
+msgstr "Show error message"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:228
+#: src/slic3r/GUI/PrintHostDialogs.cpp:259
+msgid "Enqueued"
+msgstr "Enqueued"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:260
+msgid "Uploading"
+msgstr "Uploading"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:264
+msgid "Completed"
+msgstr "Completed"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:302
+msgid "Error uploading to print host:"
+msgstr "Error uploading to print host:"
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+msgstr "NO RAMMING AT ALL"
+
+#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
+#: src/libslic3r/PrintConfig.cpp:1322 src/libslic3r/PrintConfig.cpp:1366
+#: src/libslic3r/PrintConfig.cpp:1381 src/libslic3r/PrintConfig.cpp:2132
+#: src/libslic3r/PrintConfig.cpp:2148 src/libslic3r/PrintConfig.cpp:4288
+#: src/libslic3r/PrintConfig.cpp:4297 src/libslic3r/PrintConfig.cpp:4407
+#: src/libslic3r/PrintConfig.cpp:4415 src/libslic3r/PrintConfig.cpp:4423
+#: src/libslic3r/PrintConfig.cpp:4430 src/libslic3r/PrintConfig.cpp:4438
+#: src/libslic3r/PrintConfig.cpp:4446
+msgid "s"
+msgstr "s"
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+msgstr "Volumetric speed"
+
+#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:1178
+#: src/libslic3r/PrintConfig.cpp:2345
+msgid "mm³/s"
+msgstr "mm³/s"
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:57
+#, possible-c-format
+msgid "Save %s as:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:110
+msgid "the following suffix is not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:116
+msgid "The supplied name is not available."
+msgstr "The supplied name is not available."
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:122
+msgid "Cannot overwrite a system profile."
+msgstr "Cannot overwrite a system profile."
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:127
+msgid "Cannot overwrite an external profile."
+msgstr "Cannot overwrite an external profile."
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:134
+#, possible-c-format
+msgid "Preset with name \"%1%\" already exists."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:136
+#, possible-c-format
+msgid "Preset with name \"%1%\" already exists and is imcopatible with selected printer."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:137
+msgid "Note: This preset will be replaced after saving"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:142
+msgid "The name cannot be empty."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:176
+#: src/slic3r/GUI/SavePresetDialog.cpp:182
+msgid "Save preset"
+msgstr "Save preset"
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:263
+#, possible-c-format
+msgid "You have selected physical printer \"%1%\" \nwith related printer preset \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:296
+#, possible-c-format
+msgid "What would you like to do with \"%1%\" preset after saving?"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:299
+#, possible-c-format
+msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:300
+#, possible-c-format
+msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:301
+#, possible-c-format
+msgid "Just switch to \"%1%\" preset"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2447
+msgid "Stealth"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2441
+msgid "Normal"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:172
+msgid "Selection-Add"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:213
+msgid "Selection-Remove"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:245
+msgid "Selection-Add Object"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:264
+msgid "Selection-Remove Object"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:282
+msgid "Selection-Add Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:301
+msgid "Selection-Remove Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:402
+msgid "Selection-Add All"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:428
+msgid "Selection-Remove All"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:987
+msgid "Scale To Fit"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:1514
+msgid "Set Printable Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:1514
+msgid "Set Unprintable Instance"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:81
+msgid "System Information"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:157
+msgid "Copy to Clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:118 src/libslic3r/PrintConfig.cpp:491
+msgid "Compatible printers"
+msgstr "Compatible printers"
+
+#: src/slic3r/GUI/Tab.cpp:119
+msgid "Select the printers this profile is compatible with."
+msgstr "Select the printers this profile is compatible with."
+
+#: src/slic3r/GUI/Tab.cpp:124 src/libslic3r/PrintConfig.cpp:506
+msgid "Compatible print profiles"
+msgstr "Compatible print profiles"
+
+#: src/slic3r/GUI/Tab.cpp:125
+msgid "Select the print profiles this profile is compatible with."
+msgstr "Select the print profiles this profile is compatible with."
+
+#. TRN "Save current Settings"
+#: src/slic3r/GUI/Tab.cpp:220
+#, possible-c-format
+msgid "Save current %s"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:221
+msgid "Delete this preset"
+msgstr "Delete this preset"
+
+#: src/slic3r/GUI/Tab.cpp:225
+msgid "Hover the cursor over buttons to find more information \nor click this button."
+msgstr "Hover the cursor over buttons to find more information \nor click this button."
+
+#: src/slic3r/GUI/Tab.cpp:229
+#, possible-c-format
+msgid "Search in settings [%1%]"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1240
+msgid "Detach from system preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1253
+msgid "A copy of the current system preset will be created, which will be detached from the system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1254
+msgid "The current custom preset will be detached from the parent system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1257
+msgid "Modifications to the current profile will be saved."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1260
+msgid "This action is not revertable.\nDo you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1262
+msgid "Detach preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1288
+msgid "This is a default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1290
+msgid "This is a system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1292
+msgid "Current preset is inherited from the default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1294
+msgid "Current preset is inherited from"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1298
+msgid "It can't be deleted or modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1299
+msgid "Any modifications should be saved as a new preset inherited from this one."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1300
+msgid "To do that please specify a new name for the preset."
+msgstr "To do that please specify a new name for the preset."
+
+#: src/slic3r/GUI/Tab.cpp:1304
+msgid "Additional information:"
+msgstr "Additional information:"
+
+#: src/slic3r/GUI/Tab.cpp:1310
+msgid "printer model"
+msgstr "printer model"
+
+#: src/slic3r/GUI/Tab.cpp:1318
+msgid "default print profile"
+msgstr "default print profile"
+
+#: src/slic3r/GUI/Tab.cpp:1321
+msgid "default filament profile"
+msgstr "default filament profile"
+
+#: src/slic3r/GUI/Tab.cpp:1335
+msgid "default SLA material profile"
+msgstr "default SLA material profile"
+
+#: src/slic3r/GUI/Tab.cpp:1339
+msgid "default SLA print profile"
+msgstr "default SLA print profile"
+
+#: src/slic3r/GUI/Tab.cpp:1347
+msgid "full profile name"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1348
+msgid "symbolic profile name"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1540
+msgid "Single Extruder Multi Material is selected, \nand all extruders must have the same diameter.\nDo you want to change the diameter for all extruders to first extruder nozzle diameter value?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1543 src/slic3r/GUI/Tab.cpp:1922
+#: src/libslic3r/PrintConfig.cpp:2452
+msgid "Nozzle diameter"
+msgstr "Nozzle diameter"
+
+#: src/slic3r/GUI/Tab.cpp:1835
+msgid "Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into SuperSlicer/physical_printer directory."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1854
+msgid "Ramming settings"
+msgstr "Ramming settings"
+
+#: src/slic3r/GUI/Tab.cpp:1890
+msgid "Extruders"
+msgstr "Extruders"
+
+#: src/slic3r/GUI/Tab.cpp:1891
+msgid "Number of extruders of the printer."
+msgstr "Number of extruders of the printer."
+
+#: src/slic3r/GUI/Tab.cpp:1900
+msgid "Milling cutters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1901
+msgid "Number of milling heads."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1920
+msgid "This is a single extruder multimaterial printer, diameters of all extruders will be set to the new value. Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1945
+msgid "Reset to Filament Color"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2082
+msgid "Filament Overrides"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2202
+msgid "Volumetric flow hints not available"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2414 src/slic3r/GUI/Tab.cpp:2520
+msgid "Machine limits"
+msgstr "Machine limits"
+
+#: src/slic3r/GUI/Tab.cpp:2417
+msgid "not-marlin/lerdge firmware compensation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2420
+msgid "Machine Limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2440
+msgid "Values in this column are for Normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2446
+msgid "Values in this column are for Stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2456
+msgid "Maximum feedrates"
+msgstr "Maximum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2464
+msgid "Maximum accelerations"
+msgstr "Maximum accelerations"
+
+#: src/slic3r/GUI/Tab.cpp:2472
+msgid "Jerk limits"
+msgstr "Jerk limits"
+
+#: src/slic3r/GUI/Tab.cpp:2477
+msgid "Minimum feedrates"
+msgstr "Minimum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2548 src/slic3r/GUI/Tab.cpp:2557
+msgid "Single extruder MM setup"
+msgstr "Single extruder MM setup"
+
+#: src/slic3r/GUI/Tab.cpp:2558
+msgid "Single extruder multimaterial parameters"
+msgstr "Single extruder multimaterial parameters"
+
+#: src/slic3r/GUI/Tab.cpp:2564
+msgid "Advanced wipe tower purge volume calculs"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2793
+msgid "The Wipe option is not available when using the Firmware Retraction mode.\n\nShall I disable it in order to enable Firmware Retraction?"
+msgstr "The Wipe option is not available when using the Firmware Retraction mode.\n\nShall I disable it in order to enable Firmware Retraction?"
+
+#: src/slic3r/GUI/Tab.cpp:2795
+msgid "Firmware Retraction"
+msgstr "Firmware Retraction"
+
+#: src/slic3r/GUI/Tab.cpp:3421
+msgid "Detached"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3488
+msgid "remove"
+msgstr "remove"
+
+#: src/slic3r/GUI/Tab.cpp:3488
+msgid "delete"
+msgstr "delete"
+
+#: src/slic3r/GUI/Tab.cpp:3497
+msgid "It's a last preset for this physical printer."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3502
+#, possible-c-format
+msgid "Are you sure you want to delete \"%1%\" preset from the physical printer \"%2%\"?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3514
+msgid "The physical printer(s) below is based on the preset, you are going to delete."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3518
+msgid "Note, that selected preset will be deleted from this/those printer(s) too."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3522
+msgid "The physical printer(s) below is based only on the preset, you are going to delete."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3526
+msgid "Note, that this/those printer(s) will be deleted after deleting of the selected preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3530
+#, possible-c-format
+msgid "Are you sure you want to %1% the selected preset?"
+msgstr ""
+
+#. TRN  Remove/Delete
+#: src/slic3r/GUI/Tab.cpp:3535
+#, possible-c-format
+msgid "%1% Preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3616 src/slic3r/GUI/Tab.cpp:3688
+msgid "Set"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3753
+msgid "Machine limits will be emitted to G-code and used to estimate print time. They are also used as safegard when generating gcode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3755 src/slic3r/GUI/Tab.cpp:3763
+#: src/slic3r/GUI/Tab.cpp:3767
+msgid "(even if the acceleration is set to 3000 in the print profile, if this is at 1500, it won't export a gcode that will tell to go over 1500)."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3757
+msgid "Grey values means that they can't be send to your firmware (no g-code available)."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3760
+msgid "Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. They are also used as safegard when generating gcode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3766
+msgid "Machine limits are used as safegard when generating gcode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3770
+msgid "Machine limits are disabled. They are not used for anything."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3842
+msgid "LOCKED LOCK"
+msgstr ""
+
+#. TRN Description for "LOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3844
+msgid "indicates that the settings are the same as the system (or default) values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3846
+msgid "UNLOCKED LOCK"
+msgstr ""
+
+#. TRN Description for "UNLOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3848
+msgid "indicates that some settings were changed and are not equal to the system (or default) values for the current option group.\nClick the UNLOCKED LOCK icon to reset all settings for current option group to the system (or default) values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3853
+msgid "WHITE BULLET"
+msgstr ""
+
+#. TRN Description for "WHITE BULLET"
+#: src/slic3r/GUI/Tab.cpp:3855
+msgid "for the left button: indicates a non-system (or non-default) preset,\nfor the right button: indicates that the settings hasn't been modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3858
+msgid "BACK ARROW"
+msgstr ""
+
+#. TRN Description for "BACK ARROW"
+#: src/slic3r/GUI/Tab.cpp:3860
+msgid "indicates that the settings were changed and are not equal to the last saved preset for the current option group.\nClick the BACK ARROW icon to reset all settings for the current option group to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3870
+msgid "LOCKED LOCK icon indicates that the settings are the same as the system (or default) values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3872
+msgid "UNLOCKED LOCK icon indicates that some settings were changed and are not equal to the system (or default) values for the current option group.\nClick to reset all settings for current option group to the system (or default) values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3875
+msgid "WHITE BULLET icon indicates a non system (or non default) preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3878
+msgid "WHITE BULLET icon indicates that the settings are the same as in the last saved preset for the current option group."
+msgstr "WHITE BULLET icon indicates that the settings are the same as in the last saved preset for the current option group."
+
+#: src/slic3r/GUI/Tab.cpp:3880
+msgid "BACK ARROW icon indicates that the settings were changed and are not equal to the last saved preset for the current option group.\nClick to reset all settings for the current option group to the last saved preset."
+msgstr "BACK ARROW icon indicates that the settings were changed and are not equal to the last saved preset for the current option group.\nClick to reset all settings for the current option group to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:3886
+msgid "LOCKED LOCK icon indicates that the value is the same as the system (or default) value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3887
+msgid "UNLOCKED LOCK icon indicates that the value was changed and is not equal to the system (or default) value.\nClick to reset current value to the system (or default) value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3893
+msgid "WHITE BULLET icon indicates that the value is the same as in the last saved preset."
+msgstr "WHITE BULLET icon indicates that the value is the same as in the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:3894
+msgid "BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset."
+msgstr "BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:4040 src/slic3r/GUI/Tab.cpp:4042
+msgid "Material"
+msgstr "Material"
+
+#: src/slic3r/GUI/Tab.cpp:4077
+msgid "Exposure"
+msgstr "Exposure"
+
+#: src/slic3r/GUI/Tab.cpp:4081
+msgid "Corrections"
+msgstr "Corrections"
+
+#: src/slic3r/GUI/Tab.cpp:4097 src/slic3r/GUI/Tab.cpp:4098
+msgid "Notes"
+msgstr "Notes"
+
+#: src/slic3r/GUI/Tab.cpp:4105 src/slic3r/GUI/Tab.cpp:4238
+msgid "Dependencies"
+msgstr "Dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:4106 src/slic3r/GUI/Tab.cpp:4239
+msgid "Profile dependencies"
+msgstr "Profile dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:4156
+msgid "Layers and perimeters"
+msgstr "Layers and perimeters"
+
+#: src/slic3r/GUI/Tab.cpp:4166
+msgid "Support head"
+msgstr "Support head"
+
+#: src/slic3r/GUI/Tab.cpp:4171
+msgid "Support pillar"
+msgstr "Support pillar"
+
+#: src/slic3r/GUI/Tab.cpp:4194
+msgid "Connection of the support sticks and junctions"
+msgstr "Connection of the support sticks and junctions"
+
+#: src/slic3r/GUI/Tab.cpp:4199
+msgid "Automatic generation"
+msgstr "Automatic generation"
+
+#: src/slic3r/GUI/Tab.cpp:4221 src/slic3r/GUI/Tab.cpp:4222
+#: src/libslic3r/SLA/Hollowing.cpp:45 src/libslic3r/SLA/Hollowing.cpp:57
+#: src/libslic3r/SLA/Hollowing.cpp:66 src/libslic3r/SLA/Hollowing.cpp:75
+msgid "Hollowing"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4228
+msgid "Advanced"
+msgstr "Advanced"
+
+#: src/slic3r/GUI/Tab.cpp:4232
+msgid "Output options"
+msgstr "Output options"
+
+#: src/slic3r/GUI/Tab.cpp:4233
+msgid "Output file"
+msgstr "Output file"
+
+#: src/slic3r/GUI/Tab.cpp:4273
+#, possible-c-format
+msgid "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\nTo enable \"%1%\", please switch off \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4654
+msgid "Object elevation"
+msgstr "Object elevation"
+
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4758
+msgid "Pad around object"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:377 src/slic3r/GUI/Tab.hpp:510
+msgid "Print Settings"
+msgstr "Print Settings"
+
+#: src/slic3r/GUI/Tab.hpp:409
+msgid "Filament Settings"
+msgstr "Filament Settings"
+
+#: src/slic3r/GUI/Tab.hpp:459
+msgid "Printer Settings"
+msgstr "Printer Settings"
+
+#: src/slic3r/GUI/Tab.hpp:494
+msgid "Material Settings"
+msgstr "Material Settings"
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:137
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:146
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
+msgid "Undef"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
+msgid "PrusaSlicer is closing: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
+msgid "Switching Presets: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
+msgid "Old Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
+msgid "New Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
+msgid "Transfer"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
+msgid "Discard"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
+msgid "Save"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
+msgid "PrusaSlicer will remember your action."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
+msgid "You will not be asked about the unsaved changes the next time you close PrusaSlicer."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
+msgid "You will not be asked about the unsaved changes the next time you switch a preset."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
+#, possible-c-format
+msgid "Visit \"Preferences\" and check \"%1%\"\nto be asked about unsaved changes again."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
+msgid "PrusaSlicer: Don't ask me again"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
+msgid "Some fields are too long to fit. Right mouse click reveals the full text."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
+msgid "All settings changes will be discarded."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Save the selected options."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Transfer the selected settings to the newly selected preset."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
+#, possible-c-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:745
+#, possible-c-format
+msgid "Transfer the selected options to the newly selected preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1025
+msgid "The following presets were modified:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1030
+#, possible-c-format
+msgid "Preset \"%1%\" has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1034
+#, possible-c-format
+msgid "Preset \"%1%\" is not compatible with the new printer profile and it has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1035
+#, possible-c-format
+msgid "Preset \"%1%\" is not compatible with the new print profile and it has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
+msgid "Extruders count"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1088
+msgid "Capabilities"
+msgstr "Capabilities"
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1199
+msgid "Old value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
+msgid "New value"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:38
+msgid "Update available"
+msgstr "Update available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:38
+#, possible-c-format
+msgid "New version of %s is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:43
+msgid "Current version:"
+msgstr "Current version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:45
+msgid "New version:"
+msgstr "New version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:53
+msgid "Changelog && Download"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
+#: src/slic3r/GUI/UpdateDialogs.cpp:183
+msgid "Open changelog page"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:65
+msgid "Open download page"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:71
+msgid "Don't notify about new releases any more"
+msgstr "Don't notify about new releases any more"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
+msgid "Configuration update"
+msgstr "Configuration update"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:89
+msgid "Configuration update is available"
+msgstr "Configuration update is available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:92
+msgid "Would you like to install it?\n\nNote that a full configuration snapshot will be created first. It can then be restored at any time should there be a problem with the new version.\n\nUpdated configuration bundles:"
+msgstr "Would you like to install it?\n\nNote that a full configuration snapshot will be created first. It can then be restored at any time should there be a problem with the new version.\n\nUpdated configuration bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
+msgid "Comment:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
+#, possible-c-format
+msgid "%s incompatibility"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:148
+msgid "You must install a configuration update."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:151
+#, possible-c-format
+msgid "%s will now start updates. Otherwise it won't be able to start.\n\nNote that a full configuration snapshot will be created first. It can then be restored at any time should there be a problem with the new version.\n\nUpdated configuration bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
+#, possible-c-format
+msgid "Exit %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:211
+#, possible-c-format
+msgid "%s configuration is incompatible"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:216
+#, possible-c-format
+msgid "This version of %s is not compatible with currently installed configuration bundles.\nThis probably happened as a result of running an older %s after using a newer one.\n\nYou may either exit %s and try again with a newer version, or you may re-run the initial configuration. Doing so will create a backup snapshot of the existing configuration before installing files compatible with this %s."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:225
+#, possible-c-format
+msgid "This %s version: %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:230
+msgid "Incompatible bundles:"
+msgstr "Incompatible bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:249
+msgid "Re-configure"
+msgstr "Re-configure"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:270
+#, possible-c-format
+msgid "%s now uses an updated configuration structure.\n\nSo called 'System presets' have been introduced, which hold the built-in default settings for various printers. These System presets cannot be modified, instead, users now may create their own presets inheriting settings from one of the System presets.\nAn inheriting preset may either inherit a particular value from its parent or override it with a customized value.\n\nPlease proceed with the %s that follows to set up the new presets and to choose whether to enable automatic preset updates."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:287
+msgid "For more information please visit Prusa wiki page:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:304
+msgid "Configuration updates"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:304
+msgid "No updates available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:309
+#, possible-c-format
+msgid "%s has no configuration updates available."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:15
+msgid "Ramming customization"
+msgstr "Ramming customization"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:41
+msgid "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n\nThis is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc."
+msgstr "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n\nThis is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:83
+msgid "Total ramming time"
+msgstr "Total ramming time"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:85
+msgid "Total rammed volume"
+msgstr "Total rammed volume"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:89
+msgid "Ramming line width"
+msgstr "Ramming line width"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:91
+msgid "Ramming line spacing"
+msgstr "Ramming line spacing"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:142
+msgid "Wipe tower - Purging volume adjustment"
+msgstr "Wipe tower - Purging volume adjustment"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:254
+msgid "Here you can adjust required purging volume (mm³) for any given pair of tools."
+msgstr "Here you can adjust required purging volume (mm³) for any given pair of tools."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:255
+msgid "Extruder changed to"
+msgstr "Extruder changed to"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:263
+msgid "unloaded"
+msgstr "unloaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:264
+msgid "loaded"
+msgstr "loaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:276
+msgid "Tool #"
+msgstr "Tool #"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:285
+msgid "Total purging volume is calculated by summing two values below, depending on which tools are loaded/unloaded."
+msgstr "Total purging volume is calculated by summing two values below, depending on which tools are loaded/unloaded."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:286
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr "Volume to purge (mm³) when the filament is being"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:300
+msgid "From"
+msgstr "From"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:365
+msgid "Switching to simple settings will discard changes done in the advanced mode!\n\nDo you want to proceed?"
+msgstr "Switching to simple settings will discard changes done in the advanced mode!\n\nDo you want to proceed?"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:377
+msgid "Show simplified settings"
+msgstr "Show simplified settings"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:377
+msgid "Show advanced settings"
+msgstr "Show advanced settings"
+
+#: src/slic3r/GUI/wxExtensions.cpp:624
+#, possible-c-format
+msgid "Switch to the %s mode"
+msgstr "Switch to the %s mode"
+
+#: src/slic3r/GUI/wxExtensions.cpp:625
+#, possible-c-format
+msgid "Current mode is %s"
+msgstr "Current mode is %s"
+
+#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68
+#, possible-c-format
+msgid "Mismatched type of print host: %s"
+msgstr "Mismatched type of print host: %s"
+
+#: src/slic3r/Utils/AstroBox.cpp:84
+msgid "Connection to AstroBox works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/AstroBox.cpp:90
+msgid "Could not connect to AstroBox"
+msgstr ""
+
+#: src/slic3r/Utils/AstroBox.cpp:92
+msgid "Note: AstroBox version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:47
+msgid "Connection to Duet works correctly."
+msgstr "Connection to Duet works correctly."
+
+#: src/slic3r/Utils/Duet.cpp:53
+msgid "Could not connect to Duet"
+msgstr "Could not connect to Duet"
+
+#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151
+#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
+#: src/slic3r/Utils/FlashAir.cpp:159
+msgid "Unknown error occured"
+msgstr "Unknown error occured"
+
+#: src/slic3r/Utils/Duet.cpp:145
+msgid "Wrong password"
+msgstr "Wrong password"
+
+#: src/slic3r/Utils/Duet.cpp:148
+msgid "Could not get resources to create a new connection"
+msgstr "Could not get resources to create a new connection"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:219
+#: src/slic3r/Utils/FixModelByWin10.cpp:359
+msgid "Exporting source model"
+msgstr "Exporting source model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr "Failed loading the input model."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing model by the Netfabb service"
+msgstr "Repairing model by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+msgstr "Mesh repair failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:251
+#: src/slic3r/Utils/FixModelByWin10.cpp:378
+msgid "Loading repaired model"
+msgstr "Loading repaired model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:263
+#: src/slic3r/Utils/FixModelByWin10.cpp:270
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgid "Saving mesh into the 3MF container failed."
+msgstr "Saving mesh into the 3MF container failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:340
+msgid "Model fixing"
+msgstr "Model fixing"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:341
+msgid "Exporting model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:368
+msgid "Export of a temporary 3mf file failed"
+msgstr "Export of a temporary 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:383
+msgid "Import of the repaired 3mf file failed"
+msgstr "Import of the repaired 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:385
+msgid "Repaired 3MF file does not contain any object"
+msgstr "Repaired 3MF file does not contain any object"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:387
+msgid "Repaired 3MF file contains more than one object"
+msgstr "Repaired 3MF file contains more than one object"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:389
+msgid "Repaired 3MF file does not contain any volume"
+msgstr "Repaired 3MF file does not contain any volume"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:391
+msgid "Repaired 3MF file contains more than one volume"
+msgstr "Repaired 3MF file contains more than one volume"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:400
+msgid "Model repair finished"
+msgstr "Model repair finished"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:406
+msgid "Model repair canceled"
+msgstr "Model repair canceled"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+msgid "Model repaired successfully"
+msgstr "Model repaired successfully"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model Repair by the Netfabb service"
+msgstr "Model Repair by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model repair failed:"
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:58
+msgid "Upload not enabled on FlashAir card."
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:68
+msgid "Connection to FlashAir works correctly and upload is enabled."
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:74
+msgid "Could not connect to FlashAir"
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:76
+msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:83
+msgid "Connection to OctoPrint works correctly."
+msgstr "Connection to OctoPrint works correctly."
+
+#: src/slic3r/Utils/OctoPrint.cpp:89
+msgid "Could not connect to OctoPrint"
+msgstr "Could not connect to OctoPrint"
+
+#: src/slic3r/Utils/OctoPrint.cpp:91
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr "Note: OctoPrint version at least 1.1.0 is required."
+
+#: src/slic3r/Utils/OctoPrint.cpp:185
+msgid "Connection to Prusa SL1 works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:191
+msgid "Could not connect to Prusa SLA"
+msgstr "Could not connect to Prusa SLA"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:743
+#, possible-c-format
+msgid "requires min. %s and max. %s"
+msgstr "requires min. %s and max. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:747
+#, possible-c-format
+msgid "requires min. %s"
+msgstr "requires min. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:750
+#, possible-c-format
+msgid "requires max. %s"
+msgstr "requires max. %s"
+
+#: src/slic3r/Utils/Http.cpp:73
+msgid "Could not detect system SSL certificate store. PrusaSlicer will be unable to establish secure network connections."
+msgstr ""
+
+#: src/slic3r/Utils/Http.cpp:78
+#, possible-c-format
+msgid "PrusaSlicer detected system SSL certificate store in: %1%"
+msgstr ""
+
+#: src/slic3r/Utils/Http.cpp:82
+#, possible-c-format
+msgid "To specify the system certificate store manually, please set the %1% environment variable to the correct CA bundle and restart the application."
+msgstr ""
+
+#: src/slic3r/Utils/Http.cpp:91
+msgid "CURL init has failed. PrusaSlicer will be unable to establish network connections. See logs for additional details."
+msgstr ""
+
+#: src/slic3r/Utils/Process.cpp:151
+msgid "Open G-code file:"
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:640
+msgid "There is an object with no extrusions on the first layer."
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:658
+msgid "Empty layers detected, the output would not be printable."
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:659
+msgid "Print z"
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:660
+msgid "This is usually caused by negligibly small extrusions or by a faulty model. Try to repair the model or change its orientation on the bed."
+msgstr ""
+
+#: src/libslic3r/ExtrusionEntity.cpp:277 src/libslic3r/ExtrusionEntity.cpp:310
+#: src/libslic3r/PrintConfig.cpp:709 src/libslic3r/PrintConfig.cpp:737
+#: src/libslic3r/PrintConfig.cpp:756 src/libslic3r/PrintConfig.cpp:2068
+#: src/libslic3r/PrintConfig.cpp:2070 src/libslic3r/PrintConfig.cpp:3509
+msgid "Ironing"
+msgstr ""
+
+#: src/libslic3r/ExtrusionEntity.cpp:288 src/libslic3r/ExtrusionEntity.cpp:332
+msgid "Mixed"
+msgstr "Mixed"
+
+#: src/libslic3r/Flow.cpp:61
+#, possible-c-format
+msgid "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
+msgstr ""
+
+#: src/libslic3r/Format/3mf.cpp:1697
+#, possible-c-format
+msgid "The selected 3mf file has been saved with a newer version of %1% and is not compatible."
+msgstr ""
+
+#: src/libslic3r/Format/AMF.cpp:955
+#, possible-c-format
+msgid "The selected amf file has been saved with a newer version of %1% and is not compatible."
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:91
+msgid "undefined error"
+msgstr "undefined error"
+
+#: src/libslic3r/miniz_extension.cpp:93
+msgid "too many files"
+msgstr "too many files"
+
+#: src/libslic3r/miniz_extension.cpp:95
+msgid "file too large"
+msgstr "file too large"
+
+#: src/libslic3r/miniz_extension.cpp:97
+msgid "unsupported method"
+msgstr "unsupported method"
+
+#: src/libslic3r/miniz_extension.cpp:99
+msgid "unsupported encryption"
+msgstr "unsupported encryption"
+
+#: src/libslic3r/miniz_extension.cpp:101
+msgid "unsupported feature"
+msgstr "unsupported feature"
+
+#: src/libslic3r/miniz_extension.cpp:103
+msgid "failed finding central directory"
+msgstr "failed finding central directory"
+
+#: src/libslic3r/miniz_extension.cpp:105
+msgid "not a ZIP archive"
+msgstr "not a ZIP archive"
+
+#: src/libslic3r/miniz_extension.cpp:107
+msgid "invalid header or archive is corrupted"
+msgstr "invalid header or archive is corrupted"
+
+#: src/libslic3r/miniz_extension.cpp:109
+msgid "unsupported multidisk archive"
+msgstr "unsupported multidisk archive"
+
+#: src/libslic3r/miniz_extension.cpp:111
+msgid "decompression failed or archive is corrupted"
+msgstr "decompression failed or archive is corrupted"
+
+#: src/libslic3r/miniz_extension.cpp:113
+msgid "compression failed"
+msgstr "compression failed"
+
+#: src/libslic3r/miniz_extension.cpp:115
+msgid "unexpected decompressed size"
+msgstr "unexpected decompressed size"
+
+#: src/libslic3r/miniz_extension.cpp:117
+msgid "CRC-32 check failed"
+msgstr "CRC-32 check failed"
+
+#: src/libslic3r/miniz_extension.cpp:119
+msgid "unsupported central directory size"
+msgstr "unsupported central directory size"
+
+#: src/libslic3r/miniz_extension.cpp:121
+msgid "allocation failed"
+msgstr "allocation failed"
+
+#: src/libslic3r/miniz_extension.cpp:123
+msgid "file open failed"
+msgstr "file open failed"
+
+#: src/libslic3r/miniz_extension.cpp:125
+msgid "file create failed"
+msgstr "file create failed"
+
+#: src/libslic3r/miniz_extension.cpp:127
+msgid "file write failed"
+msgstr "file write failed"
+
+#: src/libslic3r/miniz_extension.cpp:129
+msgid "file read failed"
+msgstr "file read failed"
+
+#: src/libslic3r/miniz_extension.cpp:131
+msgid "file close failed"
+msgstr "file close failed"
+
+#: src/libslic3r/miniz_extension.cpp:133
+msgid "file seek failed"
+msgstr "file seek failed"
+
+#: src/libslic3r/miniz_extension.cpp:135
+msgid "file stat failed"
+msgstr "file stat failed"
+
+#: src/libslic3r/miniz_extension.cpp:137
+msgid "invalid parameter"
+msgstr "invalid parameter"
+
+#: src/libslic3r/miniz_extension.cpp:139
+msgid "invalid filename"
+msgstr "invalid filename"
+
+#: src/libslic3r/miniz_extension.cpp:141
+msgid "buffer too small"
+msgstr "buffer too small"
+
+#: src/libslic3r/miniz_extension.cpp:143
+msgid "internal error"
+msgstr "internal error"
+
+#: src/libslic3r/miniz_extension.cpp:145
+msgid "file not found"
+msgstr "file not found"
+
+#: src/libslic3r/miniz_extension.cpp:147
+msgid "archive is too large"
+msgstr "archive is too large"
+
+#: src/libslic3r/miniz_extension.cpp:149
+msgid "validation failed"
+msgstr "validation failed"
+
+#: src/libslic3r/miniz_extension.cpp:151
+msgid "write calledback failed"
+msgstr "write calledback failed"
+
+#: src/libslic3r/Preset.cpp:1471
+msgid "filament"
+msgstr "filament"
+
+#: src/libslic3r/Print.cpp:1351
+msgid "All objects are outside of the print volume."
+msgstr "All objects are outside of the print volume."
+
+#: src/libslic3r/Print.cpp:1354
+msgid "The supplied settings will cause an empty print."
+msgstr "The supplied settings will cause an empty print."
+
+#: src/libslic3r/Print.cpp:1358
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr "Some objects are too close; your extruder will collide with them."
+
+#: src/libslic3r/Print.cpp:1360
+msgid "Some objects are too tall and cannot be printed without extruder collisions."
+msgstr "Some objects are too tall and cannot be printed without extruder collisions."
+
+#: src/libslic3r/Print.cpp:1369
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr "The Spiral Vase option can only be used when printing a single object."
+
+#: src/libslic3r/Print.cpp:1376
+msgid "The Spiral Vase option can only be used when printing single material objects."
+msgstr "The Spiral Vase option can only be used when printing single material objects."
+
+#: src/libslic3r/Print.cpp:1389
+msgid "The wipe tower is only supported if all extruders have the same nozzle diameter and use filaments of the same diameter."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1395
+msgid "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter and Repetier G-code flavors."
+msgstr "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter and Repetier G-code flavors."
+
+#: src/libslic3r/Print.cpp:1397
+msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)."
+msgstr "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)."
+
+#: src/libslic3r/Print.cpp:1399
+msgid "Ooze prevention is currently not supported with the wipe tower enabled."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1401
+msgid "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1403
+msgid "The Wipe Tower is currently not supported for multimaterial sequential prints."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1424
+msgid "The Wipe Tower is only supported for multiple objects if they have equal layer heights"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1426
+msgid "The Wipe Tower is only supported for multiple objects if they are printed over an equal number of raft layers"
+msgstr "The Wipe Tower is only supported for multiple objects if they are printed over an equal number of raft layers"
+
+#: src/libslic3r/Print.cpp:1430
+msgid "The Wipe Tower is only supported for multiple objects if they are printed with the same support_material_contact_distance"
+msgstr "The Wipe Tower is only supported for multiple objects if they are printed with the same support_material_contact_distance"
+
+#: src/libslic3r/Print.cpp:1432
+msgid "The Wipe Tower is only supported for multiple objects if they are sliced equally."
+msgstr "The Wipe Tower is only supported for multiple objects if they are sliced equally."
+
+#: src/libslic3r/Print.cpp:1474
+msgid "The Wipe tower is only supported if all objects have the same variable layer height"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1500
+msgid "One or more object were assigned an extruder that the printer does not have."
+msgstr "One or more object were assigned an extruder that the printer does not have."
+
+#: src/libslic3r/Print.cpp:1509
+#, possible-c-format
+msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1512
+#, possible-c-format
+msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1523
+msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current extruder (support_material_extruder == 0 or support_material_interface_extruder == 0), all nozzles have to be of the same diameter."
+msgstr "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current extruder (support_material_extruder == 0 or support_material_interface_extruder == 0), all nozzles have to be of the same diameter."
+
+#: src/libslic3r/Print.cpp:1531
+msgid "For the Wipe Tower to work with the soluble supports, the support layers need to be synchronized with the object layers."
+msgstr "For the Wipe Tower to work with the soluble supports, the support layers need to be synchronized with the object layers."
+
+#: src/libslic3r/Print.cpp:1535
+msgid "The Wipe Tower currently supports the non-soluble supports only if they are printed with the current extruder without triggering a tool change. (both support_material_extruder and support_material_interface_extruder need to be set to 0)."
+msgstr "The Wipe Tower currently supports the non-soluble supports only if they are printed with the current extruder without triggering a tool change. (both support_material_extruder and support_material_interface_extruder need to be set to 0)."
+
+#: src/libslic3r/Print.cpp:1557
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr "First layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/Print.cpp:1562
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr "Layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/Print.cpp:1722
+msgid "Infilling layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1752
+msgid "Generating skirt"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1809
+msgid "Generating brim"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1871
+msgid "Exporting G-code"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1875
+msgid "Generating G-code"
+msgstr ""
+
+#: src/libslic3r/SLA/Pad.cpp:532
+msgid "Pad brim size is too small for the current configuration."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:628
+msgid "Cannot proceed without support points! Add support points or disable support generation."
+msgstr "Cannot proceed without support points! Add support points or disable support generation."
+
+#: src/libslic3r/SLAPrint.cpp:640
+msgid "Elevation is too low for object. Use the \"Pad around object\" feature to print the object without elevation."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:646
+msgid "The endings of the support pillars will be deployed on the gap between the object and the pad. 'Support base safety distance' has to be greater than the 'Pad object gap' parameter to avoid this."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:661
+msgid "Exposition time is out of printer profile bounds."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:668
+msgid "Initial exposition time is out of printer profile bounds."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:784
+msgid "Slicing done"
+msgstr "Slicing done"
+
+#: src/libslic3r/SLAPrintSteps.cpp:44
+msgid "Hollowing model"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:45
+msgid "Drilling holes into model."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:46
+msgid "Slicing model"
+msgstr "Slicing model"
+
+#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:361
+msgid "Generating support points"
+msgstr "Generating support points"
+
+#: src/libslic3r/SLAPrintSteps.cpp:48
+msgid "Generating support tree"
+msgstr "Generating support tree"
+
+#: src/libslic3r/SLAPrintSteps.cpp:49
+msgid "Generating pad"
+msgstr "Generating pad"
+
+#: src/libslic3r/SLAPrintSteps.cpp:50
+msgid "Slicing supports"
+msgstr "Slicing supports"
+
+#: src/libslic3r/SLAPrintSteps.cpp:65
+msgid "Merging slices and calculating statistics"
+msgstr "Merging slices and calculating statistics"
+
+#: src/libslic3r/SLAPrintSteps.cpp:66
+msgid "Rasterizing layers"
+msgstr "Rasterizing layers"
+
+#: src/libslic3r/SLAPrintSteps.cpp:192
+msgid "Too many overlapping holes."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:201
+msgid "Drilling holes into the mesh failed. This is usually caused by broken model. Try to fix it first."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:247
+msgid "Slicing had to be stopped due to an internal error: Inconsistent slice index."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422
+#: src/libslic3r/SLAPrintSteps.cpp:461
+msgid "Visualizing supports"
+msgstr "Visualizing supports"
+
+#: src/libslic3r/SLAPrintSteps.cpp:453
+msgid "No pad can be generated for this model with the current configuration"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:621
+msgid "There are unprintable objects. Try to adjust support settings to make the objects printable."
+msgstr ""
+
+#: src/libslic3r/PrintBase.cpp:72
+msgid "Failed processing of the output_filename_format template."
+msgstr "Failed processing of the output_filename_format template."
+
+#: src/libslic3r/PrintConfig.cpp:49 src/libslic3r/PrintConfig.cpp:50
+msgid "Printer technology"
+msgstr "Printer technology"
+
+#: src/libslic3r/PrintConfig.cpp:58
+msgid "Bed shape"
+msgstr "Bed shape"
+
+#: src/libslic3r/PrintConfig.cpp:64
+msgid "Bed custom texture"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:70
+msgid "Bed custom model"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:76
+msgid "Thumbnails size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:77
+msgid "Picture sizes to be stored into a .gcode and .sl1 files"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:83
+msgid "Thumbnail color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:85
+msgid "This is the color that will be enforce on objects in the thumbnails."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:91
+msgid "Enforce thumbnail color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:92
+msgid "Enforce a specific color on thumbnails. If not enforced, their color will be the one defined by the filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:98
+msgid "Bed on thumbnail"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:99
+msgid "Show the bed texture on the thumbnail picture."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:104
+msgid "Support on thumbnail"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:105
+msgid "Show the supports (and pads) on the thumbnail picture."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:110
+msgid "Base Layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:112
+msgid "This setting controls the height (and thus the total number) of the slices/layers. Thinner layers give better accuracy but take more time to print."
+msgstr "This setting controls the height (and thus the total number) of the slices/layers. Thinner layers give better accuracy but take more time to print."
+
+#: src/libslic3r/PrintConfig.cpp:120
+msgid "Max print height"
+msgstr "Max print height"
+
+#: src/libslic3r/PrintConfig.cpp:122
+msgid "Set this to the maximum height that can be reached by your extruder while printing."
+msgstr "Set this to the maximum height that can be reached by your extruder while printing."
+
+#: src/libslic3r/PrintConfig.cpp:130
+msgid "Slice gap closing radius"
+msgstr "Slice gap closing radius"
+
+#: src/libslic3r/PrintConfig.cpp:132
+msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low."
+msgstr "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low."
+
+#: src/libslic3r/PrintConfig.cpp:140 src/libslic3r/PrintConfig.cpp:2494
+msgid "Hostname, IP or URL"
+msgstr "Hostname, IP or URL"
+
+#: src/libslic3r/PrintConfig.cpp:142 src/libslic3r/PrintConfig.cpp:2496
+msgid "Slic3r can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance."
+msgstr "Slic3r can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance."
+
+#: src/libslic3r/PrintConfig.cpp:148 src/libslic3r/PrintConfig.cpp:2479
+msgid "API Key / Password"
+msgstr "API Key / Password"
+
+#: src/libslic3r/PrintConfig.cpp:150 src/libslic3r/PrintConfig.cpp:2481
+msgid "Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication."
+msgstr "Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication."
+
+#: src/libslic3r/PrintConfig.cpp:157
+msgid "Name of the printer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:2488
+msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:180
+msgid "Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:186
+msgid "Printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid "Related printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:192
+msgid "Authorization Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:212
+msgid "Allow empty layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:214
+msgid "Do not prevent the gcode builder to trigger an exception if a full layer is empty and so the print will have to start from thin air afterward."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:219
+msgid "Avoid crossing perimeters"
+msgstr "Avoid crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:221
+msgid "Optimize travel moves in order to minimize the crossing of perimeters. This is mostly useful with Bowden extruders which suffer from oozing. This feature slows down both the print and the G-code generation."
+msgstr "Optimize travel moves in order to minimize the crossing of perimeters. This is mostly useful with Bowden extruders which suffer from oozing. This feature slows down both the print and the G-code generation."
+
+#: src/libslic3r/PrintConfig.cpp:228 src/libslic3r/PrintConfig.cpp:229
+msgid "Don't avoid crossing on 1st layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:231
+msgid "Do not use the 'Avoid crossing perimeters' on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:236 src/libslic3r/PrintConfig.cpp:3563
+msgid "Other layers"
+msgstr "Other layers"
+
+#: src/libslic3r/PrintConfig.cpp:238
+msgid "Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output."
+msgstr "Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:241
+msgid "Bed temperature"
+msgstr "Bed temperature"
+
+#: src/libslic3r/PrintConfig.cpp:248
+msgid "Before layer change G-code"
+msgstr "Before layer change G-code"
+
+#: src/libslic3r/PrintConfig.cpp:250
+msgid "This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+msgstr "This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:260
+msgid "Between objects G-code"
+msgstr "Between objects G-code"
+
+#: src/libslic3r/PrintConfig.cpp:262
+msgid "This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr "This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want."
+
+#: src/libslic3r/PrintConfig.cpp:273
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr "Number of solid layers to generate on bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:274
+msgid "Bottom solid layers"
+msgstr "Bottom solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:281
+msgid "The number of bottom solid layers is increased above bottom_solid_layers if necessary to satisfy minimum thickness of bottom shell."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:283
+msgid "Minimum bottom shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:289 src/libslic3r/PrintConfig.cpp:339
+msgid "Bridge"
+msgstr "Bridge"
+
+#: src/libslic3r/PrintConfig.cpp:290
+msgid "Bridge acceleration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:292
+#, possible-c-format
+msgid "This is the acceleration your printer will use for bridges.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for bridges."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:295 src/libslic3r/PrintConfig.cpp:599
+#: src/libslic3r/PrintConfig.cpp:1661 src/libslic3r/PrintConfig.cpp:1859
+#: src/libslic3r/PrintConfig.cpp:2633
+msgid "mm/s² or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:301
+msgid "Bridging"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:302
+msgid "Bridging angle"
+msgstr "Bridging angle"
+
+#: src/libslic3r/PrintConfig.cpp:304
+msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for all bridges. Use 180° for zero angle."
+msgstr "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for all bridges. Use 180° for zero angle."
+
+#: src/libslic3r/PrintConfig.cpp:307 src/libslic3r/PrintConfig.cpp:436
+#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:1510
+#: src/libslic3r/PrintConfig.cpp:2947 src/libslic3r/PrintConfig.cpp:2958
+#: src/libslic3r/PrintConfig.cpp:3071 src/libslic3r/PrintConfig.cpp:3086
+#: src/libslic3r/PrintConfig.cpp:3336 src/libslic3r/PrintConfig.cpp:3548
+#: src/libslic3r/PrintConfig.cpp:3910 src/libslic3r/PrintConfig.cpp:4628
+#: src/libslic3r/PrintConfig.cpp:4751
+msgid "°"
+msgstr "°"
+
+#: src/libslic3r/PrintConfig.cpp:313
+msgid "Bridges fan speed"
+msgstr "Bridges fan speed"
+
+#: src/libslic3r/PrintConfig.cpp:315
+msgid "This fan speed is enforced during all bridges and overhangs. It won't slow down the fan if it's currently running at a higher speed.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:319 src/libslic3r/PrintConfig.cpp:332
+#: src/libslic3r/PrintConfig.cpp:341 src/libslic3r/PrintConfig.cpp:355
+#: src/libslic3r/PrintConfig.cpp:368 src/libslic3r/PrintConfig.cpp:821
+#: src/libslic3r/PrintConfig.cpp:832 src/libslic3r/PrintConfig.cpp:845
+#: src/libslic3r/PrintConfig.cpp:858 src/libslic3r/PrintConfig.cpp:875
+#: src/libslic3r/PrintConfig.cpp:1073 src/libslic3r/PrintConfig.cpp:1104
+#: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1230
+#: src/libslic3r/PrintConfig.cpp:1401 src/libslic3r/PrintConfig.cpp:1522
+#: src/libslic3r/PrintConfig.cpp:1598 src/libslic3r/PrintConfig.cpp:1608
+#: src/libslic3r/PrintConfig.cpp:1651 src/libslic3r/PrintConfig.cpp:1771
+#: src/libslic3r/PrintConfig.cpp:2052 src/libslic3r/PrintConfig.cpp:2300
+#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2381
+#: src/libslic3r/PrintConfig.cpp:2779 src/libslic3r/PrintConfig.cpp:2928
+#: src/libslic3r/PrintConfig.cpp:2938 src/libslic3r/PrintConfig.cpp:3673
+#: src/libslic3r/PrintConfig.cpp:4305 src/libslic3r/PrintConfig.cpp:4542
+#: src/libslic3r/PrintConfig.cpp:4670
+msgid "%"
+msgstr "%"
+
+#: src/libslic3r/PrintConfig.cpp:326
+msgid "Top fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:328
+msgid "This fan speed is enforced during all top fills.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:340
+msgid "Bridge flow ratio"
+msgstr "Bridge flow ratio"
+
+#: src/libslic3r/PrintConfig.cpp:343
+msgid "This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this."
+msgstr "This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this."
+
+#: src/libslic3r/PrintConfig.cpp:353
+msgid "Above the bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:354
+msgid "Above bridge flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:357
+msgid "Flow ratio to compensate for the gaps in a bridged top surface. Used for ironing infillpattern to prevent regions where the low-flow pass does not provide a smooth surface due to a lack of plastic. You can increase it slightly to pull the top layer at the correct height. Recommended maximum: 120%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:366 src/libslic3r/PrintConfig.cpp:367
+msgid "Bridge overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:370
+msgid "Amount of overlap between lines of the bridge. If want more space between line (or less), you can modify it. Default to 100%. A value of 50% will create two times less lines."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:377
+msgid "Bridges"
+msgstr "Bridges"
+
+#: src/libslic3r/PrintConfig.cpp:378
+msgid "Bridge speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:380
+msgid "Speed for printing bridges."
+msgstr "Speed for printing bridges."
+
+#: src/libslic3r/PrintConfig.cpp:381 src/libslic3r/PrintConfig.cpp:392
+#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1203
+#: src/libslic3r/PrintConfig.cpp:1295 src/libslic3r/PrintConfig.cpp:1304
+#: src/libslic3r/PrintConfig.cpp:1312 src/libslic3r/PrintConfig.cpp:1339
+#: src/libslic3r/PrintConfig.cpp:1358 src/libslic3r/PrintConfig.cpp:1783
+#: src/libslic3r/PrintConfig.cpp:1997 src/libslic3r/PrintConfig.cpp:2071
+#: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2238
+#: src/libslic3r/PrintConfig.cpp:2250 src/libslic3r/PrintConfig.cpp:2260
+#: src/libslic3r/PrintConfig.cpp:2325 src/libslic3r/PrintConfig.cpp:2424
+#: src/libslic3r/PrintConfig.cpp:2534 src/libslic3r/PrintConfig.cpp:2665
+#: src/libslic3r/PrintConfig.cpp:2892 src/libslic3r/PrintConfig.cpp:2902
+#: src/libslic3r/PrintConfig.cpp:3527 src/libslic3r/PrintConfig.cpp:3651
+#: src/libslic3r/PrintConfig.cpp:3752 src/libslic3r/PrintConfig.cpp:4220
+msgid "mm/s"
+msgstr "mm/s"
+
+#: src/libslic3r/PrintConfig.cpp:388
+msgid "Internal bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:389
+msgid "Internal bridge speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:391
+#, possible-c-format
+msgid "Speed for printing the bridges that support the top layer.\nCan be a % of the bridge speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:400
+msgid "Brim inside holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:402
+msgid "Allow to create a brim over an island when it's inside a hole (or surrounded by an object)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:407
+msgid "Brim width"
+msgstr "Brim width"
+
+#: src/libslic3r/PrintConfig.cpp:409
+msgid "Horizontal width of the brim that will be printed around each object on the first layer."
+msgstr "Horizontal width of the brim that will be printed around each object on the first layer."
+
+#: src/libslic3r/PrintConfig.cpp:416
+msgid "Interior Brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:418
+msgid "Horizontal width of the brim that will be printed inside each object on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:426
+msgid "Brim ears"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:428
+msgid "Only draw brim over the sharp edges of the model."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:433
+msgid "Max angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:435
+msgid "Maximum angle to let a brim ear appear. \nIf set to 0, no brim will be created. \nIf set to ~178, brim will be created on everything but strait sections."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:443 src/libslic3r/PrintConfig.cpp:1554
+#: src/libslic3r/PrintConfig.cpp:3476 src/libslic3r/PrintConfig.cpp:3491
+msgid "Pattern"
+msgstr "Pattern"
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid "Ear pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:446
+msgid "Pattern for the ear. The concentric id the default one. The rectilinear has a perimeter around it, you can try it if the concentric has too many problems to stick to the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:703
+#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:760
+#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:3505
+msgid "Concentric"
+msgstr "Concentric"
+
+#: src/libslic3r/PrintConfig.cpp:452 src/libslic3r/PrintConfig.cpp:699
+#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:757
+#: src/libslic3r/PrintConfig.cpp:1576 src/libslic3r/PrintConfig.cpp:3484
+#: src/libslic3r/PrintConfig.cpp:3503
+msgid "Rectilinear"
+msgstr "Rectilinear"
+
+#: src/libslic3r/PrintConfig.cpp:456
+msgid "Brim offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:458
+msgid "Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior., so it has to be lower than them"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:465
+msgid "Chamber"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:466
+msgid "Chamber temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:468
+msgid "Chamber temperature0. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:476
+msgid "Clip multi-part objects"
+msgstr "Clip multi-part objects"
+
+#: src/libslic3r/PrintConfig.cpp:478
+msgid "When printing multi-material objects, this settings will make Slic3r to clip the overlapping object parts one by the other (2nd part will be clipped by the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:485
+msgid "Colorprint height"
+msgstr "Colorprint height"
+
+#: src/libslic3r/PrintConfig.cpp:487
+msgid "Heights at which a filament change is to occur. "
+msgstr "Heights at which a filament change is to occur. "
+
+#: src/libslic3r/PrintConfig.cpp:497
+msgid "Compatible printers condition"
+msgstr "Compatible printers condition"
+
+#: src/libslic3r/PrintConfig.cpp:498
+msgid "A boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile."
+msgstr "A boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile."
+
+#: src/libslic3r/PrintConfig.cpp:512
+msgid "Compatible print profiles condition"
+msgstr "Compatible print profiles condition"
+
+#: src/libslic3r/PrintConfig.cpp:513
+msgid "A boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile."
+msgstr "A boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile."
+
+#: src/libslic3r/PrintConfig.cpp:530
+msgid "Complete individual objects"
+msgstr "Complete individual objects"
+
+#: src/libslic3r/PrintConfig.cpp:532
+msgid "When printing multiple objects or copies, this feature will complete each object before moving onto next one (and starting it from its bottom layer). This feature is useful to avoid the risk of ruined prints. Slic3r should warn and prevent you from extruder collisions, but beware."
+msgstr "When printing multiple objects or copies, this feature will complete each object before moving onto next one (and starting it from its bottom layer). This feature is useful to avoid the risk of ruined prints. Slic3r should warn and prevent you from extruder collisions, but beware."
+
+#: src/libslic3r/PrintConfig.cpp:540
+msgid "Allow only one skirt loop"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:542
+msgid "When using 'Complete individual objects', the default behavior is to draw the skirt around each object. if you prefer to have only one skirt for the whole plater, use this option."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:548
+msgid "Object sort"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:550
+msgid "When printing multiple objects or copies on after another, this will help you to choose how it's ordered.\nObject will sort them by the order of the right panel.\nLowest Y will sort them by their lowest Y point. Useful for printers with a X-bar.\nLowest Z will sort them by their height, useful for delta printers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:559
+msgid "Right panel"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:560
+msgid "lowest Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:561
+msgid "lowest Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:566
+msgid "Enable auto cooling"
+msgstr "Enable auto cooling"
+
+#: src/libslic3r/PrintConfig.cpp:568
+msgid "This flag enables the automatic cooling logic that adjusts print speed and fan speed according to layer printing time."
+msgstr "This flag enables the automatic cooling logic that adjusts print speed and fan speed according to layer printing time."
+
+#: src/libslic3r/PrintConfig.cpp:574
+msgid "Cooling tube position"
+msgstr "Cooling tube position"
+
+#: src/libslic3r/PrintConfig.cpp:576
+msgid "Distance of the center-point of the cooling tube from the extruder tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:583
+msgid "Cooling tube length"
+msgstr "Cooling tube length"
+
+#: src/libslic3r/PrintConfig.cpp:585
+msgid "Length of the cooling tube to limit space for cooling moves inside it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:594
+msgid "Default acceleration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:595
+#, possible-c-format
+msgid "This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nYou can set it as a % of the max of the X/Y machine acceleration limit.\nSet zero to prevent resetting acceleration at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:605
+msgid "Default filament profile"
+msgstr "Default filament profile"
+
+#: src/libslic3r/PrintConfig.cpp:606
+msgid "Default filament profile associated with the current printer profile. On selection of the current printer profile, this filament profile will be activated."
+msgstr "Default filament profile associated with the current printer profile. On selection of the current printer profile, this filament profile will be activated."
+
+#: src/libslic3r/PrintConfig.cpp:612
+msgid "Default print profile"
+msgstr "Default print profile"
+
+#: src/libslic3r/PrintConfig.cpp:613 src/libslic3r/PrintConfig.cpp:4472
+#: src/libslic3r/PrintConfig.cpp:4483
+msgid "Default print profile associated with the current printer profile. On selection of the current printer profile, this print profile will be activated."
+msgstr "Default print profile associated with the current printer profile. On selection of the current printer profile, this print profile will be activated."
+
+#: src/libslic3r/PrintConfig.cpp:619
+msgid "Disable fan for the first"
+msgstr "Disable fan for the first"
+
+#: src/libslic3r/PrintConfig.cpp:621
+msgid "You can set this to a positive value to disable fan at all during the first layers, so that it does not make adhesion worse."
+msgstr "You can set this to a positive value to disable fan at all during the first layers, so that it does not make adhesion worse."
+
+#: src/libslic3r/PrintConfig.cpp:630
+msgid "Don't support bridges"
+msgstr "Don't support bridges"
+
+#: src/libslic3r/PrintConfig.cpp:632
+msgid "Experimental option for preventing support material from being generated under bridged areas."
+msgstr "Experimental option for preventing support material from being generated under bridged areas."
+
+#: src/libslic3r/PrintConfig.cpp:638
+msgid "Distance between objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:640
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr "Distance used for the auto-arrange feature of the plater."
+
+#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:658
+msgid "End G-code"
+msgstr "End G-code"
+
+#: src/libslic3r/PrintConfig.cpp:649
+msgid "This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all Slic3r settings."
+msgstr "This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all Slic3r settings."
+
+#: src/libslic3r/PrintConfig.cpp:659
+msgid "Filament end G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:661
+msgid "This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all Slic3r settings. If you have multiple extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:672
+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+#: src/libslic3r/PrintConfig.cpp:674
+msgid "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)."
+msgstr "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)."
+
+#: src/libslic3r/PrintConfig.cpp:681
+msgid "Top Pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:683
+msgid "Fill pattern for top infill. This only affects the top visible layer, and not its adjacent solid shells."
+msgstr "Fill pattern for top infill. This only affects the top visible layer, and not its adjacent solid shells."
+
+#: src/libslic3r/PrintConfig.cpp:700 src/libslic3r/PrintConfig.cpp:730
+msgid "Monotonic (filled)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:701 src/libslic3r/PrintConfig.cpp:731
+#: src/libslic3r/PrintConfig.cpp:759 src/libslic3r/PrintConfig.cpp:1577
+#: src/libslic3r/PrintConfig.cpp:3504
+msgid "Monotonic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:702
+msgid "Aligned Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:733
+#: src/libslic3r/PrintConfig.cpp:761 src/libslic3r/PrintConfig.cpp:3506
+msgid "Concentric (filled)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:705 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1587
+#: src/libslic3r/PrintConfig.cpp:3507
+msgid "Hilbert Curve"
+msgstr "Hilbert Curve"
+
+#: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:735
+#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1588
+msgid "Archimedean Chords"
+msgstr "Archimedean Chords"
+
+#: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:736
+#: src/libslic3r/PrintConfig.cpp:764 src/libslic3r/PrintConfig.cpp:1589
+msgid "Octagram Spiral"
+msgstr "Octagram Spiral"
+
+#: src/libslic3r/PrintConfig.cpp:708 src/libslic3r/PrintConfig.cpp:3508
+msgid "Sawtooth"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:714
+msgid "Bottom fill pattern"
+msgstr "Bottom fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:716
+msgid "Fill pattern for bottom infill. This only affects the bottom visible layer, and not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:742
+msgid "Solid pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:744
+msgid "Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear is most cases. You can try ironing for transluscnet material. Rectilinear (filled) replace zig-zag patterns by a single big line & is more efficient for filling little spaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:758
+msgid "Rectilinear (filled)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:769
+#, possible-c-format
+msgid "Enforce 100% fill volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:771
+msgid "Experimental option which modifies (in solid infill) fill flow to have the exact amount of plastic inside the volume to fill (it generally changes the flow from -7% to +4%, depending on the size of the surface to fill and the overlap parameters, but it can go as high as +50% for infill in very small areas where rectilinear doesn't have good coverage). It has the advantage to remove the over-extrusion seen in thin infill areas, from the overlap ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:780
+msgid "Default infill margin"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:782
+#, possible-c-format
+msgid "This parameter grows the top/bottom/solid layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the perimeters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:794
+#: src/libslic3r/PrintConfig.cpp:1638
+msgid "mm/%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:790
+msgid "Bridged"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:791
+msgid "Bridge margin"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:793
+#, possible-c-format
+msgid "This parameter grows the bridged solid infill layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the external perimeter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:801
+msgid "External perimeters"
+msgstr "External perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:802
+msgid "External perimeters width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:804
+msgid "Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.05 x nozzle diameter will be used. If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:1116
+#: src/libslic3r/PrintConfig.cpp:1686 src/libslic3r/PrintConfig.cpp:1699
+#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1959
+#: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2654 src/libslic3r/PrintConfig.cpp:3044
+#: src/libslic3r/PrintConfig.cpp:3058 src/libslic3r/PrintConfig.cpp:3155
+#: src/libslic3r/PrintConfig.cpp:3324 src/libslic3r/PrintConfig.cpp:3423
+#: src/libslic3r/PrintConfig.cpp:3704 src/libslic3r/PrintConfig.cpp:4202
+#: src/libslic3r/PrintConfig.cpp:4211
+msgid "mm or %"
+msgstr "mm or %"
+
+#: src/libslic3r/PrintConfig.cpp:814
+msgid "Cutting corners"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:815
+msgid "Ext. peri. cut corners"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:817
+#, possible-c-format
+msgid "Activate this option to modify the flow to acknoledge that the nozzle is round and the corners will have a round shape, and so change the flow to realized that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this change the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:826
+msgid "External perimeter fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:827
+msgid "When set to a non-zero value this fan speed is used only for external perimeters (visible ones). \nSet to 1 to disable the fan.\nSet to -1 to use the normal fan speed on external perimeters.External perimeters can benefit from higher fan speed to improve surface finish, while internal perimeters, infill, etc. benefit from lower fan speed to improve layer adhesion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:839
+msgid "external perimeter overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:840
+msgid "Ext. peri. overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:842
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:852
+msgid "perimeter overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:853
+msgid "Perimeter overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:855
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that perimeters are not touching each other anymore.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:865
+msgid "Better bonding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:866
+msgid "Perimeter bonding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:868
+msgid "This setting may degrad a bit the quality of your external perimeter, in exchange for a better bonding between perimeters.Use it if you have great difficulties with perimeter bonding, for example with high temperature filaments.\nThis percentage is the % of overlap between perimeters, a bit like perimeter_overlap and external_perimeter_overlap, but in reverse. You have to set perimeter_overlap and external_perimeter_overlap to 100%, or this setting has no effect. 0: no effect, 50%: half of the nozzle will be over an already extruded perimeter while extruding a new one, unless it's an external ones).\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:882
+msgid "External"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:883
+msgid "External perimeters speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:885
+msgid "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:888 src/libslic3r/PrintConfig.cpp:1714
+#: src/libslic3r/PrintConfig.cpp:1728 src/libslic3r/PrintConfig.cpp:3032
+#: src/libslic3r/PrintConfig.cpp:3168 src/libslic3r/PrintConfig.cpp:3469
+#: src/libslic3r/PrintConfig.cpp:3719
+msgid "mm/s or %"
+msgstr "mm/s or %"
+
+#: src/libslic3r/PrintConfig.cpp:895
+msgid "first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:896
+msgid "External perimeters first"
+msgstr "External perimeters first"
+
+#: src/libslic3r/PrintConfig.cpp:898
+msgid "Print contour perimeters from the outermost one to the innermost one instead of the default inverse order."
+msgstr "Print contour perimeters from the outermost one to the innermost one instead of the default inverse order."
+
+#: src/libslic3r/PrintConfig.cpp:904
+msgid "In vase mode (no seam)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:905
+msgid "ExternalPerimeter in vase mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:907
+msgid "Print contour perimeters in two circle, in a contiunous way, like for a vase mode. It needs the external_perimeters_first parameter do work. \nDoesn't work for the first layer, as it may damage the bed overwise. \nNote that It will use min_layer_height from your hardware setting as the base height (it doesn't start at 0), so be sure to put here the lowest value your printer can handle. if it's not lower than two times the current layer height, it falls back to the normal algorithm, as there are not enough room to do two loops."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:916
+msgid "Only for outer side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:917
+msgid "Ext peri first for outer side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:919
+msgid "Only do the vase trick on the external side. Useful when the thikness is too low."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "Only for inner side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:925
+msgid "ext peri first for inner side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:927
+msgid "Only do the vase trick on the external side. Useful when you only want to remode seam from screw hole."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:936
+msgid "Perimeters loop"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:938
+msgid "Join the perimeters to create only one continuous extrusion without any z-hop. Long inside travel (from external to holes) are not extruded to give some space to the infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:944 src/libslic3r/PrintConfig.cpp:2907
+msgid "Seam position"
+msgstr "Seam position"
+
+#: src/libslic3r/PrintConfig.cpp:945
+msgid "Perimeter loop seam"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:947
+msgid "Position of perimeters starting points."
+msgstr "Position of perimeters starting points."
+
+#: src/libslic3r/PrintConfig.cpp:951
+msgid "Nearest"
+msgstr "Nearest"
+
+#: src/libslic3r/PrintConfig.cpp:957
+msgid "filling horizontal gaps on slopes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:958
+msgid "Extra perimeters (do nothing)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:960
+#, possible-c-format
+msgid "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r keeps adding perimeters, until more than 70% of the loop immediately above is supported.\nIf you succeed to trigger the algorihtm behind this setting, please send me a message. Personally, i think it's useless."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:969
+msgid "On overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:970
+msgid "Extra perimeters over overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:972
+msgid "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r keeps adding perimeter until all overhangs are filled.\n!! this is a very slow algorithm !!\nIf you use this setting, consider strongly using also overhangs_reverse."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:980
+msgid "On odd layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:981
+msgid "Extra perimeter on odd layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:983
+msgid "Add one perimeter every odd layer. With this, infill is taken into sandwitch and you may be able to reduce drastically the infill/perimeter overlap setting. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:989
+msgid "Only one perimeter on Top surfaces"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:991
+msgid "Use only one perimeter on flat top surface, to let more space to the top infill pattern."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:999
+msgid "The extruder to use (unless more specific extruder settings are specified). This value overrides perimeter and infill extruders, but not the support extruders."
+msgstr "The extruder to use (unless more specific extruder settings are specified). This value overrides perimeter and infill extruders, but not the support extruders."
+
+#: src/libslic3r/PrintConfig.cpp:1015
+msgid "Extruder clearance height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1017
+msgid "Set this to the vertical distance between your nozzle tip and (usually) the X carriage rods. In other words, this is the height of the clearance cylinder around your extruder, and it represents the maximum depth the extruder can peek before colliding with other printed objects."
+msgstr "Set this to the vertical distance between your nozzle tip and (usually) the X carriage rods. In other words, this is the height of the clearance cylinder around your extruder, and it represents the maximum depth the extruder can peek before colliding with other printed objects."
+
+#: src/libslic3r/PrintConfig.cpp:1029
+msgid "Extruder clearance radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1030
+msgid "Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the plater."
+msgstr "Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the plater."
+
+#: src/libslic3r/PrintConfig.cpp:1040
+msgid "Extruder Color"
+msgstr "Extruder Color"
+
+#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1146
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr "This is only used in the Slic3r interface as a visual help."
+
+#: src/libslic3r/PrintConfig.cpp:1049
+msgid "Extruder offset"
+msgstr "Extruder offset"
+
+#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:4145
+msgid "If your firmware doesn't handle the extruder displacement you need the G-code to take it into account. This option lets you specify the displacement of each extruder with respect to the first one. It expects positive coordinates (they will be subtracted from the XY coordinate)."
+msgstr "If your firmware doesn't handle the extruder displacement you need the G-code to take it into account. This option lets you specify the displacement of each extruder with respect to the first one. It expects positive coordinates (they will be subtracted from the XY coordinate)."
+
+#: src/libslic3r/PrintConfig.cpp:1060
+msgid "Extruder temp offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1062
+msgid "This offset will be added to all extruder temperature set by the filament settings.\nNote that you should set 'M104 S{first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]}'\ninstead of 'M104 S[first_layer_temperature]' in the start_gcode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1070
+msgid "Extruder fan offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1072
+msgid "This offset wil be add to all fan value set by the filament properties. It won't make them go higher than 100% and lower than 0%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1079
+msgid "Extrusion axis"
+msgstr "Extrusion axis"
+
+#: src/libslic3r/PrintConfig.cpp:1081
+msgid "Use this option to set the axis letter associated to your printer's extruder (usually E but some printers use A)."
+msgstr "Use this option to set the axis letter associated to your printer's extruder (usually E but some printers use A)."
+
+#: src/libslic3r/PrintConfig.cpp:1086 src/libslic3r/PrintConfig.cpp:1096
+msgid "Extrusion multiplier"
+msgstr "Extrusion multiplier"
+
+#: src/libslic3r/PrintConfig.cpp:1088
+msgid "This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 0.9 and 1.1. If you think you need to change this more, check filament diameter and your firmware E steps."
+msgstr "This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 0.9 and 1.1. If you think you need to change this more, check filament diameter and your firmware E steps."
+
+#: src/libslic3r/PrintConfig.cpp:1098
+msgid "This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 90% and 110%. If you think you need to change this more, check filament diameter and your firmware E steps. This print setting is multiplied against the extrusion_multiplier from the filament tab. Its only purpose is to offer the same functionality but with a per-object basis."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1110
+msgid "Default extrusion width"
+msgstr "Default extrusion width"
+
+#: src/libslic3r/PrintConfig.cpp:1112
+msgid "Set this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1123
+msgid "Keep fan always on"
+msgstr "Keep fan always on"
+
+#: src/libslic3r/PrintConfig.cpp:1125
+msgid "If this is enabled, fan will continuously run at base speed if no setting override the speed. Useful for PLA, harmful for ABS."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1131
+msgid "Enable fan if layer print time is below"
+msgstr "Enable fan if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:1133
+msgid "If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the default and maximum speeds.\nSet to 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1136 src/libslic3r/PrintConfig.cpp:3019
+msgid "approximate seconds"
+msgstr "approximate seconds"
+
+#: src/libslic3r/PrintConfig.cpp:1144
+msgid "Filament color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1152
+msgid "Filament notes"
+msgstr "Filament notes"
+
+#: src/libslic3r/PrintConfig.cpp:1154
+msgid "You can put your notes regarding the filament here."
+msgstr "You can put your notes regarding the filament here."
+
+#: src/libslic3r/PrintConfig.cpp:1162
+msgid "Max speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1164
+msgid "Maximum speed allowed for this filament. Limits the maximum speed of a print to the minimum of the print speed and the filament speed. Set to zero for no limit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:2341
+msgid "Max volumetric speed"
+msgstr "Max volumetric speed"
+
+#: src/libslic3r/PrintConfig.cpp:1175
+msgid "Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit."
+msgstr "Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit."
+
+#: src/libslic3r/PrintConfig.cpp:1184
+msgid "Max speed on the wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1185
+msgid "This setting is used to set the maximum speed when extruding inside the wipe tower (use M220). In %, set 0 to disable and use the Filament type instead.\nIf disabled, these filament types will have a defaut value of:\n - PVA: 80% to 60%\n - SCAFF: 35%\n - FLEX: 35%\n - OTHERS: 100%\nNote that the wipe tower reset the speed at 100% for the unretract in any case.\nIf using marlin, M220 B/R is used to save the speed override before the wipe tower print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1201
+msgid "Loading speed"
+msgstr "Loading speed"
+
+#: src/libslic3r/PrintConfig.cpp:1202
+msgid "Speed used for loading the filament on the wipe tower. "
+msgstr "Speed used for loading the filament on the wipe tower. "
+
+#: src/libslic3r/PrintConfig.cpp:1210
+msgid "Toolchange temperature enabled"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1211
+msgid "Determines whether toolchange temperatures will be applied"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1216
+msgid "Fast mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1217
+msgid "Experimental: drops nozzle temperature during cooling moves instead of prior to extraction to reduce wait time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1222
+msgid "Use part fan to cool hotend"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1223
+msgid "Experimental setting.  May enable the hotend to cool down faster during toolchanges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1228
+msgid "Toolchange part fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1229
+msgid "Experimental setting.  Fan speeds that are too high can clash with the hotend's PID routine."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1237
+msgid "Enable Skinnydip string reduction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1238
+msgid "Skinnydip performs a secondary dip into the meltzone to burn off fine strings of filament"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1243
+msgid "Pause in melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1244
+msgid "Stay in melt zone for this amount of time before extracting the filament.  Not usually necessary."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1245 src/libslic3r/PrintConfig.cpp:1253
+msgid "milliseconds"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1251
+msgid "Pause before extraction "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1252
+msgid "Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "Speed to move into melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1268
+msgid "usually not necessary to change this"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:1269
+msgid "mm/sec"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1267
+msgid "Speed to extract from melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1275
+msgid "Toolchange temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1276
+msgid "To further reduce stringing, it can be helpful to set a lower temperature just prior to extracting filament from the hotend."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1284
+msgid "Insertion distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1285
+msgid "For stock extruders, usually 40-42mm.  For bondtech extruder upgrade, usually 30-32mm.  Start with a low value and gradually increase it until strings are gone.  If there are blobs on your wipe tower, your value is too high."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1293
+msgid "Loading speed at the start"
+msgstr "Loading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:1294
+msgid "Speed used at the very beginning of loading phase. "
+msgstr "Speed used at the very beginning of loading phase. "
+
+#: src/libslic3r/PrintConfig.cpp:1301
+msgid "Unloading speed"
+msgstr "Unloading speed"
+
+#: src/libslic3r/PrintConfig.cpp:1302
+msgid "Speed used for unloading the filament on the wipe tower (does not affect  initial part of unloading just after ramming). "
+msgstr "Speed used for unloading the filament on the wipe tower (does not affect  initial part of unloading just after ramming). "
+
+#: src/libslic3r/PrintConfig.cpp:1310
+msgid "Unloading speed at the start"
+msgstr "Unloading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:1311
+msgid "Speed used for unloading the tip of the filament immediately after ramming. "
+msgstr "Speed used for unloading the tip of the filament immediately after ramming. "
+
+#: src/libslic3r/PrintConfig.cpp:1318
+msgid "Delay after unloading"
+msgstr "Delay after unloading"
+
+#: src/libslic3r/PrintConfig.cpp:1319
+msgid "Time to wait after the filament is unloaded. May help to get reliable toolchanges with flexible materials that may need more time to shrink to original dimensions. "
+msgstr "Time to wait after the filament is unloaded. May help to get reliable toolchanges with flexible materials that may need more time to shrink to original dimensions. "
+
+#: src/libslic3r/PrintConfig.cpp:1328
+msgid "Number of cooling moves"
+msgstr "Number of cooling moves"
+
+#: src/libslic3r/PrintConfig.cpp:1329
+msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1337
+msgid "Speed of the first cooling move"
+msgstr "Speed of the first cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:1338
+msgid "Cooling moves are gradually accelerating beginning at this speed. "
+msgstr "Cooling moves are gradually accelerating beginning at this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:1345
+msgid "Minimal purge on wipe tower"
+msgstr "Minimal purge on wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:1346
+msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Slic3r will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably."
+msgstr "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Slic3r will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably."
+
+#: src/libslic3r/PrintConfig.cpp:1350
+msgid "mm³"
+msgstr "mm³"
+
+#: src/libslic3r/PrintConfig.cpp:1356
+msgid "Speed of the last cooling move"
+msgstr "Speed of the last cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:1357
+msgid "Cooling moves are gradually accelerating towards this speed. "
+msgstr "Cooling moves are gradually accelerating towards this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:1364
+msgid "Filament load time"
+msgstr "Filament load time"
+
+#: src/libslic3r/PrintConfig.cpp:1365
+msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+msgstr "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:1372
+msgid "Ramming parameters"
+msgstr "Ramming parameters"
+
+#: src/libslic3r/PrintConfig.cpp:1373
+msgid "This string is edited by RammingDialog and contains ramming specific parameters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1379
+msgid "Filament unload time"
+msgstr "Filament unload time"
+
+#: src/libslic3r/PrintConfig.cpp:1380
+msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+msgstr "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:1388
+msgid "Enter your filament diameter here. Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+msgstr "Enter your filament diameter here. Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+
+#: src/libslic3r/PrintConfig.cpp:1396
+msgid "Shrinkage"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1397
+#, possible-c-format
+msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in xy to conpensate. Only the filament used for the perimeter is taken into account.\nBe sure to let enough space between objects, as this compensation is done after the checks."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1407 src/libslic3r/PrintConfig.cpp:4383
+#: src/libslic3r/PrintConfig.cpp:4384
+msgid "Density"
+msgstr "Density"
+
+#: src/libslic3r/PrintConfig.cpp:1409
+msgid "Enter your filament density here. This is only for statistical information. A decent way is to weigh a known length of filament and compute the ratio of the length to volume. Better is to calculate the volume directly through displacement."
+msgstr "Enter your filament density here. This is only for statistical information. A decent way is to weigh a known length of filament and compute the ratio of the length to volume. Better is to calculate the volume directly through displacement."
+
+#: src/libslic3r/PrintConfig.cpp:1412
+msgid "g/cm³"
+msgstr "g/cm³"
+
+#: src/libslic3r/PrintConfig.cpp:1418
+msgid "Filament type"
+msgstr "Filament type"
+
+#: src/libslic3r/PrintConfig.cpp:1420
+msgid "The filament material type for use in custom G-codes."
+msgstr "The filament material type for use in custom G-codes."
+
+#: src/libslic3r/PrintConfig.cpp:1456
+msgid "Soluble material"
+msgstr "Soluble material"
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid "Soluble material is most likely used for a soluble support."
+msgstr "Soluble material is most likely used for a soluble support."
+
+#: src/libslic3r/PrintConfig.cpp:1464
+msgid "Filament cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1466
+msgid "Enter your filament cost per kg here. This is only for statistical information."
+msgstr "Enter your filament cost per kg here. This is only for statistical information."
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid "money/kg"
+msgstr "money/kg"
+
+#: src/libslic3r/PrintConfig.cpp:1472
+msgid "Spool weight"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1474
+msgid "Enter weight of the empty filament spool. One may weigh a partially consumed filament spool before printing and one may compare the measured weight with the calculated weight of the filament with the spool to find out whether the amount of filament on the spool is sufficient to finish the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1478
+msgid "g"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:4467
+msgid "(Unknown)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1504
+msgid "Fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1492
+msgid "Fill angle"
+msgstr "Fill angle"
+
+#: src/libslic3r/PrintConfig.cpp:1494
+msgid "Default base angle for infill orientation. Cross-hatching will be applied to this. Bridges will be infilled using the best direction Slic3r can detect, so this setting does not affect them."
+msgstr "Default base angle for infill orientation. Cross-hatching will be applied to this. Bridges will be infilled using the best direction Slic3r can detect, so this setting does not affect them."
+
+#: src/libslic3r/PrintConfig.cpp:1505
+msgid "Fill angle increment"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid "Add this angle each layer to the base angle for infill. May be useful for art, or to be sure to hit every object's feature even with very low infill. Still experiemental, tell me what makes it useful, or the problems that arise using it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1519
+msgid "Fill density"
+msgstr "Fill density"
+
+#: src/libslic3r/PrintConfig.cpp:1521
+#, possible-c-format
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr "Density of internal infill, expressed in the range 0% - 100%."
+
+#: src/libslic3r/PrintConfig.cpp:1555
+msgid "Fill pattern"
+msgstr "Fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:1557
+msgid "Fill pattern for general low-density infill."
+msgstr "Fill pattern for general low-density infill."
+
+#: src/libslic3r/PrintConfig.cpp:1578
+msgid "Grid"
+msgstr "Grid"
+
+#: src/libslic3r/PrintConfig.cpp:1579
+msgid "Triangles"
+msgstr "Triangles"
+
+#: src/libslic3r/PrintConfig.cpp:1580
+msgid "Stars"
+msgstr "Stars"
+
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid "Cubic"
+msgstr "Cubic"
+
+#: src/libslic3r/PrintConfig.cpp:1582
+msgid "Line"
+msgstr "Line"
+
+#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:3486
+msgid "Honeycomb"
+msgstr "Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:1585
+msgid "3D Honeycomb"
+msgstr "3D Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:1586
+msgid "Gyroid"
+msgstr "Gyroid"
+
+#: src/libslic3r/PrintConfig.cpp:1590
+msgid "Scattered Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1591
+msgid "Adaptive Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1592
+msgid "Support Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1596
+msgid "Top fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1597
+msgid "Top fill flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1600
+msgid "You can increase this to over-extrude on the top layer if there are not enough plastic to make a good fill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1606 src/libslic3r/PrintConfig.cpp:1618
+#: src/libslic3r/PrintConfig.cpp:1655 src/libslic3r/PrintConfig.cpp:1667
+#: src/libslic3r/PrintConfig.cpp:1678 src/libslic3r/PrintConfig.cpp:1735
+msgid "First layer"
+msgstr "First layer"
+
+#: src/libslic3r/PrintConfig.cpp:1607
+msgid "First layer flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1610
+msgid "You can increase this to over-extrude on the first layer if there are not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1619
+msgid "XY First layer compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1621
+msgid "The first layer will be grown / shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1629
+msgid "Ironing width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1631
+msgid "This is the width of the ironing pass, in a % of the top infill extrusion width, should not be more than 50% (two times more lines, 50% overlap). It's not necessary to go below 25% (four times more lines, 75% overlap). \nIf you have problems with your ironing process, don't forget to look at the flow->above bridge flow, as this setting should be set to min 110% to let you have enough plastic in the top layer. A value too low will make your extruder eat the filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1642
+msgid "Distribution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1643
+msgid "Ironing flow distribution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1645
+msgid "This is the percentage of the flow that is used for the second ironing pass. Typical 10-20%. Should not be higher than 20%, unless you have your top extrusion width greatly superior to your nozzle width. A value too low and your extruder will eat the filament. A value too high and the first pass won't print well."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1656
+msgid "First layer acceleration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1658
+#, possible-c-format
+msgid "This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1668
+msgid "First layer bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1670
+msgid "Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output."
+msgstr "Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:1679
+msgid "First layer width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1681
+msgid "Set this to a non-zero value to set a manual extrusion width for first layer. You can use this to force fatter extrudates for better adhesion. If expressed as percentage (for example 140%) it will be computed over the nozzle diameter of the nozzle used for the type of extrusion. If set to zero, it will use the default extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1695
+msgid "When printing with very low layer heights, you might still want to print a thicker bottom layer to improve adhesion and tolerance for non perfect build plates. This can be expressed as an absolute value or as a percentage (for example: 75%) over the default nozzle width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1707
+msgid "Default first layer speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1709
+#, possible-c-format
+msgid "If expressed as absolute value in mm/s, this speed will be applied to all the print moves but infill of the first layer, it can be overwrite by the 'default' (default depends of the type of the path) speed if it's lower than that. If expressed as a percentage it will scale the current speed.\nSet it at 100% to remove any first layer speed modification (with first_layer_infill_speed)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1722
+msgid "Infill first layer speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1724
+msgid "If expressed as absolute value in mm/s, this speed will be applied to infill moves of the first layer, it can be overwrite by the 'default' (solid infill or infill if not bottom) speed if it's lower than that. If expressed as a percentage (for example: 40%) it will scale the current infill speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1736
+msgid "First layer nozzle temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1738
+msgid "Extruder nozzle temperature for first layer. If you want to control temperature manually during print, set this to zero to disable temperature control commands in the output file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1747
+msgid "Enable Gap Fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1749
+msgid "Enable gap fill algorithm. It will extrude small lines between perimeters when there is not enough space for another perimeter or an infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1755
+msgid "Min surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1758
+#, possible-c-format
+msgid "This setting represents the minimum mm² for a gapfill extrusion to be created.\nCan be a % of (perimeter width)²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1766
+msgid "Gap fill overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1768
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps is left, and 0% means that the gap fill won't touch the perimeters.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1779
+msgid "Gap fill speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1781
+msgid "Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues. Set zero to disable gaps filling."
+msgstr "Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues. Set zero to disable gaps filling."
+
+#: src/libslic3r/PrintConfig.cpp:1789
+msgid "Verbose G-code"
+msgstr "Verbose G-code"
+
+#: src/libslic3r/PrintConfig.cpp:1791
+msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down."
+msgstr "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down."
+
+#: src/libslic3r/PrintConfig.cpp:1798
+msgid "G-code flavor"
+msgstr "G-code flavor"
+
+#: src/libslic3r/PrintConfig.cpp:1800
+msgid "Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all."
+msgstr "Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all."
+
+#: src/libslic3r/PrintConfig.cpp:1829
+msgid "No extrusion"
+msgstr "No extrusion"
+
+#: src/libslic3r/PrintConfig.cpp:1834
+msgid "Label objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1836
+msgid "Enable this to add comments into the G-Code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1844
+msgid "High extruder current on filament swap"
+msgstr "High extruder current on filament swap"
+
+#: src/libslic3r/PrintConfig.cpp:1846
+msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip."
+msgstr "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip."
+
+#: src/libslic3r/PrintConfig.cpp:1854
+msgid "Infill acceleration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1856
+#, possible-c-format
+msgid "This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1865
+msgid "Combine infill every"
+msgstr "Combine infill every"
+
+#: src/libslic3r/PrintConfig.cpp:1867
+msgid "This feature allows to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr "This feature allows to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy."
+
+#: src/libslic3r/PrintConfig.cpp:1870
+msgid "Combine infill every n layers"
+msgstr "Combine infill every n layers"
+
+#: src/libslic3r/PrintConfig.cpp:1876
+msgid "Length of the infill anchor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1878
+msgid "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width.\nIf set to 0, it will use a simpler algo that don't try to create a fake perimeter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1890
+msgid "0 (Simple connect)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1895
+msgid "1000 (unlimited)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1904
+#, possible-c-format
+msgid "Enables the creation of a support layer under the first solid layer. This allows you to use a lower infill ratio without compromising the top quality. The dense infill is laid out with a 50% infill density."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1910
+msgid "Do not connect infill lines to each other"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1912
+msgid "Give to the infill algorithm if the infill needs to be connected, and on which periemters Can be useful for art or with high infill/perimeter overlap. The result amy varies between infill typers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1920
+msgid "Connected"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1921
+msgid "Connected to hole perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1922
+msgid "Connected to outer perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1923
+msgid "Not connected"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:3860
+msgid "Algorithm"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1931
+msgid "Choose the way the dense layer is lay out. The automatic option let it try to draw the smallest surface with only strait lines inside the sparse infill. The anchored just enlarge a bit (by 'Default infill margin') the surfaces that need a better support."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1938
+msgid "Automatic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1939
+msgid "Automatic, only for small areas"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1940
+msgid "Anchored"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1945
+msgid "Infill extruder"
+msgstr "Infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1947
+msgid "The extruder to use when printing infill."
+msgstr "The extruder to use when printing infill."
+
+#: src/libslic3r/PrintConfig.cpp:1955
+msgid "Set this to a non-zero value to set a manual extrusion width for infill. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1966
+msgid "Infill before perimeters"
+msgstr "Infill before perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1968
+msgid "This option will switch the print order of perimeters and infill, making the latter first."
+msgstr "This option will switch the print order of perimeters and infill, making the latter first."
+
+#: src/libslic3r/PrintConfig.cpp:1973
+msgid "Only infill where needed"
+msgstr "Only infill where needed"
+
+#: src/libslic3r/PrintConfig.cpp:1975
+msgid "This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, slows down the G-code generation due to the multiple checks involved."
+msgstr "This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, slows down the G-code generation due to the multiple checks involved."
+
+#: src/libslic3r/PrintConfig.cpp:1982
+msgid "Infill/perimeters overlap"
+msgstr "Infill/perimeters overlap"
+
+#: src/libslic3r/PrintConfig.cpp:1984
+msgid "This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width."
+msgstr "This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width."
+
+#: src/libslic3r/PrintConfig.cpp:1993
+msgid "Sparse"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1996
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr "Speed for printing the internal fill. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:2004
+msgid "Inherits profile"
+msgstr "Inherits profile"
+
+#: src/libslic3r/PrintConfig.cpp:2005
+msgid "Name of the profile, from which this profile inherits."
+msgstr "Name of the profile, from which this profile inherits."
+
+#: src/libslic3r/PrintConfig.cpp:2018
+msgid "Interface shells"
+msgstr "Interface shells"
+
+#: src/libslic3r/PrintConfig.cpp:2019
+msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material."
+msgstr "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material."
+
+#: src/libslic3r/PrintConfig.cpp:2027
+msgid "Enable ironing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2028
+msgid "Enable ironing of the top layers with the hot print head for smooth surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2034 src/libslic3r/PrintConfig.cpp:2036
+msgid "Ironing Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2048
+msgid "Flow rate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2050
+msgid "Percent of a flow rate relative to object's normal layer height. It's the percentage of the layer that will be over-extruded on top to do the ironing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2059
+msgid "Spacing between ironing lines"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2061
+msgid "Distance between ironing lines"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2077 src/libslic3r/PrintConfig.cpp:2090
+msgid "After layer change G-code"
+msgstr "After layer change G-code"
+
+#: src/libslic3r/PrintConfig.cpp:2079
+msgid "This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+msgstr "This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:2092
+msgid "This custom code is inserted at every extrusion type change.Note that you can use placeholder variables for all Slic3r settings as well as [extrusion_role], [layer_num] and [layer_z] that can take these string values: { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the role of the extrusion is not unique, not exactly inside an other category or not known."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2104
+msgid "Exact last layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2106
+msgid "This setting controls the height of last object layers to put the last layer at the exact highest height possible. Experimental."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2111
+msgid "Supports remaining times"
+msgstr "Supports remaining times"
+
+#: src/libslic3r/PrintConfig.cpp:2113
+msgid "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode."
+msgstr "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode."
+
+#: src/libslic3r/PrintConfig.cpp:2121
+msgid "Supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2123
+msgid "The firmware supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2137
+msgid "Fan startup delay"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2130
+msgid "Move the fan start in the past by at least this delay (in seconds, you can use decimals). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves. Use 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2139
+msgid "Will only take into account the delay for the cooling of overhangs."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2144
+msgid "Fan KickStart time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2146
+msgid "Add a M106 S255 (max speed for fan) for this amount of seconds before gonig down to the desired speed to kick-start the cooling fan.\nSet to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2154
+msgid "How to apply limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2155
+msgid "Purpose of Machine Limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2157
+msgid "How to apply the Machine Limits.\n* In every case, they will be used as safeguard: Even if you use a print profile that set an acceleration of 5000, if your machine limits the acceleration is 4000, the outputted gcode will use the 4000 limit.\n* You can also use it as safeguard and to have a better printing time estimate.\n* You can also use it as safeguard, to have a better printing time estimate and emit the limits as the begining of the gcode file, with M201 M202 M203 M204 and M205 commands. If you want only to write a sub-set, choose the 'for time estimate' option and write yourself gcodes in the custom gcode section."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2168
+msgid "Also emit limits to G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid "Use also for time estimate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2170
+msgid "Use only as safeguards"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2171
+msgid "Disable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2194
+msgid "Maximum feedrate X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2195
+msgid "Maximum feedrate Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2196
+msgid "Maximum feedrate Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2197
+msgid "Maximum feedrate E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2200
+msgid "Maximum feedrate of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2201
+msgid "Maximum feedrate of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2202
+msgid "Maximum feedrate of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2203
+msgid "Maximum feedrate of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2211
+msgid "Maximum acceleration X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2212
+msgid "Maximum acceleration Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2213
+msgid "Maximum acceleration Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2214
+msgid "Maximum acceleration E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2217
+msgid "Maximum acceleration of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2218
+msgid "Maximum acceleration of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2219
+msgid "Maximum acceleration of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2220
+msgid "Maximum acceleration of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2221 src/libslic3r/PrintConfig.cpp:2270
+#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290
+msgid "mm/s²"
+msgstr "mm/s²"
+
+#: src/libslic3r/PrintConfig.cpp:2228
+msgid "Maximum jerk X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2229
+msgid "Maximum jerk Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2230
+msgid "Maximum jerk Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2231
+msgid "Maximum jerk E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2234
+msgid "Maximum jerk of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2235
+msgid "Maximum jerk of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2236
+msgid "Maximum jerk of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2237
+msgid "Maximum jerk of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Minimum feedrate when extruding"
+msgstr "Minimum feedrate when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:2249
+msgid "Minimum feedrate when extruding (M205 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2257
+msgid "Minimum travel feedrate"
+msgstr "Minimum travel feedrate"
+
+#: src/libslic3r/PrintConfig.cpp:2259
+msgid "Minimum travel feedrate (M205 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2267
+msgid "Maximum acceleration when extruding"
+msgstr "Maximum acceleration when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:2269
+msgid "Maximum acceleration when extruding (M204 P)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2277
+msgid "Maximum acceleration when retracting"
+msgstr "Maximum acceleration when retracting"
+
+#: src/libslic3r/PrintConfig.cpp:2279
+msgid "Maximum acceleration when retracting (M204 R)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2287
+msgid "Maximum acceleration when travelling"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2289
+msgid "Maximum acceleration when travelling (M204 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2307
+msgid "Max"
+msgstr "Max"
+
+#: src/libslic3r/PrintConfig.cpp:2299
+msgid "This setting represents the maximum speed of your fan, used when the layer print time is Very short."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2310
+#, possible-c-format
+msgid "This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr "This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:2320
+msgid "Max print speed"
+msgstr "Max print speed"
+
+#: src/libslic3r/PrintConfig.cpp:2322
+msgid "When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow."
+msgstr "When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow."
+
+#: src/libslic3r/PrintConfig.cpp:2331
+msgid "Max speed reduction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2333
+msgid "Set to 90% if you don't want the speed to be reduced by more than 90%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2343
+msgid "This experimental setting is used to set the maximum volumetric speed your extruder supports."
+msgstr "This experimental setting is used to set the maximum volumetric speed your extruder supports."
+
+#: src/libslic3r/PrintConfig.cpp:2352
+msgid "Max volumetric slope positive"
+msgstr "Max volumetric slope positive"
+
+#: src/libslic3r/PrintConfig.cpp:2353 src/libslic3r/PrintConfig.cpp:2365
+msgid "This experimental setting is used to limit the speed of change in extrusion rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr "This experimental setting is used to limit the speed of change in extrusion rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+
+#: src/libslic3r/PrintConfig.cpp:2357 src/libslic3r/PrintConfig.cpp:2369
+msgid "mm³/s²"
+msgstr "mm³/s²"
+
+#: src/libslic3r/PrintConfig.cpp:2364
+msgid "Max volumetric slope negative"
+msgstr "Max volumetric slope negative"
+
+#: src/libslic3r/PrintConfig.cpp:2377
+msgid "Default fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2380
+msgid "This setting represents the base fan speed this filament needs, or at least the minimum PWM your fan needs to work."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2388
+msgid "Min"
+msgstr "Min"
+
+#: src/libslic3r/PrintConfig.cpp:2391
+msgid "This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm."
+msgstr "This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm."
+
+#: src/libslic3r/PrintConfig.cpp:2399
+msgid "Minimum extrusion length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2401
+msgid "Too many too small commands may overload the firmware / connection. Put a higher value here if you see strange slowdown.\n0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2409
+msgid "Minimum top width for infill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2411
+#, possible-c-format
+msgid "If a top surface has to be printed and it's partially covered by an other layer, it won't be considered at a top layer where his width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2421
+msgid "Min print speed"
+msgstr "Min print speed"
+
+#: src/libslic3r/PrintConfig.cpp:2423
+msgid "Slic3r will never scale the speed below this one."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2430
+msgid "Minimal filament extrusion length"
+msgstr "Minimal filament extrusion length"
+
+#: src/libslic3r/PrintConfig.cpp:2432
+msgid "Generate no less than the number of skirt loops required to consume the specified amount of filament on the bottom layer. For multi-extruder machines, this minimum applies to each extruder."
+msgstr "Generate no less than the number of skirt loops required to consume the specified amount of filament on the bottom layer. For multi-extruder machines, this minimum applies to each extruder."
+
+#: src/libslic3r/PrintConfig.cpp:2441
+msgid "Configuration notes"
+msgstr "Configuration notes"
+
+#: src/libslic3r/PrintConfig.cpp:2443
+msgid "You can put here your personal notes. This text will be added to the G-code header comments."
+msgstr "You can put here your personal notes. This text will be added to the G-code header comments."
+
+#: src/libslic3r/PrintConfig.cpp:2454
+msgid "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+
+#: src/libslic3r/PrintConfig.cpp:2460
+msgid "Host Type"
+msgstr "Host Type"
+
+#: src/libslic3r/PrintConfig.cpp:2462
+msgid "Slic3r can upload G-code files to a printer host. This field must contain the kind of the host."
+msgstr "Slic3r can upload G-code files to a printer host. This field must contain the kind of the host."
+
+#: src/libslic3r/PrintConfig.cpp:2502
+msgid "Only retract when crossing perimeters"
+msgstr "Only retract when crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:2504
+msgid "Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will be probably invisible)."
+msgstr "Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will be probably invisible)."
+
+#: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:3803
+msgid "Enable"
+msgstr "Enable"
+
+#: src/libslic3r/PrintConfig.cpp:2512
+msgid "This option will drop the temperature of the inactive extruders to prevent oozing. It will enable a tall skirt automatically and move extruders outside such skirt when changing temperatures."
+msgstr "This option will drop the temperature of the inactive extruders to prevent oozing. It will enable a tall skirt automatically and move extruders outside such skirt when changing temperatures."
+
+#: src/libslic3r/PrintConfig.cpp:2519
+msgid "Output filename format"
+msgstr "Output filename format"
+
+#: src/libslic3r/PrintConfig.cpp:2521
+msgid "You can use all configuration options as variables inside this template. For example: [layer_height], [fill_density] etc. You can also use [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]."
+msgstr "You can use all configuration options as variables inside this template. For example: [layer_height], [fill_density] etc. You can also use [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]."
+
+#: src/libslic3r/PrintConfig.cpp:2530
+msgid "Overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2531
+msgid "Overhangs speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2533
+#, possible-c-format
+msgid "Speed for printing overhangs.\nCan be a % of the bridge speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2541
+msgid "'As bridge' speed threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2542
+msgid "Overhang bridge speed threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2544
+#, possible-c-format
+msgid "Minimum unsupported width for an extrusion to apply the bridge speed & fan to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2553
+msgid "'As bridge' flow threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2554
+msgid "Overhang bridge flow threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2556
+#, possible-c-format
+msgid "Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2565
+msgid "Reverse on odd"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2566
+msgid "Overhang reversal"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2568
+msgid "Extrude perimeters that have a part over an overhang in the reverse direction in odd layers. That alternating pattern can drastically improve steep overhang.\n!! this is a very slow algorithm (it uses the same results as extra_perimeters_overhangs) !!"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2574
+msgid "Reverse threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2575
+msgid "Overhang reversal threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2577
+#, possible-c-format
+msgid "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2584
+msgid "No perimeters on bridge areas"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2586
+msgid "Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. \n * Remove perimeters: remove the unsupported perimeters, let the bridge area as-is.\n * Keep only bridges: remove the perimeters in the bridge areas, keep only bridges that end in solid area.\n * Keep bridges and overhangs: remove the unsupported perimeters, keep only bridges that end in solid area, fill the rest with overhang perimeters+bridges.\n * Fill the voids with bridges: remove the unsupported perimeters, draw bridges over the whole hole.* !! this one can escalate to problems with overhangs shape like  /\\, so you should use it only on one layer at a time via the height-range modifier!\n!!Computationally intensive!!. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2599
+msgid "Disabled"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2600
+msgid "Remove perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2601
+msgid "Keep only bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2602
+msgid "Keep bridges and overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2603
+msgid "Fill the voids with bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2608
+msgid "Filament parking position"
+msgstr "Filament parking position"
+
+#: src/libslic3r/PrintConfig.cpp:2609
+msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware. "
+msgstr "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware. "
+
+#: src/libslic3r/PrintConfig.cpp:2617
+msgid "Extra loading distance"
+msgstr "Extra loading distance"
+
+#: src/libslic3r/PrintConfig.cpp:2618
+msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further,  if negative, the loading move is shorter than unloading. "
+msgstr "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further,  if negative, the loading move is shorter than unloading. "
+
+#: src/libslic3r/PrintConfig.cpp:2626 src/libslic3r/PrintConfig.cpp:2647
+#: src/libslic3r/PrintConfig.cpp:2672
+msgid "Perimeters"
+msgstr "Perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:2629
+#, possible-c-format
+msgid "This is the acceleration your printer will use for perimeters. A high value like 9000 usually gives good results if your hardware is up to the job.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2638
+msgid "Perimeter extruder"
+msgstr "Perimeter extruder"
+
+#: src/libslic3r/PrintConfig.cpp:2640
+msgid "The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr "The extruder to use when printing perimeters and brim. First extruder is 1."
+
+#: src/libslic3r/PrintConfig.cpp:2650
+msgid "Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 105%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2664
+msgid "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:2675
+msgid "This option sets the number of perimeters to generate for each layer. Note that Slic3r may increase this number automatically when it detects sloping surfaces which benefit from a higher number of perimeters if the Extra Perimeters option is enabled."
+msgstr "This option sets the number of perimeters to generate for each layer. Note that Slic3r may increase this number automatically when it detects sloping surfaces which benefit from a higher number of perimeters if the Extra Perimeters option is enabled."
+
+#: src/libslic3r/PrintConfig.cpp:2679
+msgid "(minimum)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2686
+msgid "Post-processing scripts"
+msgstr "Post-processing scripts"
+
+#: src/libslic3r/PrintConfig.cpp:2688
+msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Slic3r config settings by reading environment variables."
+msgstr "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Slic3r config settings by reading environment variables."
+
+#: src/libslic3r/PrintConfig.cpp:2700
+msgid "Printer type"
+msgstr "Printer type"
+
+#: src/libslic3r/PrintConfig.cpp:2701
+msgid "Type of the printer."
+msgstr "Type of the printer."
+
+#: src/libslic3r/PrintConfig.cpp:2706
+msgid "Printer notes"
+msgstr "Printer notes"
+
+#: src/libslic3r/PrintConfig.cpp:2708
+msgid "You can put your notes regarding the printer here."
+msgstr "You can put your notes regarding the printer here."
+
+#: src/libslic3r/PrintConfig.cpp:2716
+msgid "Printer vendor"
+msgstr "Printer vendor"
+
+#: src/libslic3r/PrintConfig.cpp:2717
+msgid "Name of the printer vendor."
+msgstr "Name of the printer vendor."
+
+#: src/libslic3r/PrintConfig.cpp:2722
+msgid "Printer variant"
+msgstr "Printer variant"
+
+#: src/libslic3r/PrintConfig.cpp:2723
+msgid "Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter."
+msgstr "Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:2736
+msgid "Solid first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2738
+msgid "Use a solid layer instead of a raft for the layer that touch the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2743
+msgid "Raft layers"
+msgstr "Raft layers"
+
+#: src/libslic3r/PrintConfig.cpp:2745
+msgid "The object will be raised by this number of layers, and support material will be generated under it."
+msgstr "The object will be raised by this number of layers, and support material will be generated under it."
+
+#: src/libslic3r/PrintConfig.cpp:2753
+msgid "Resolution"
+msgstr "Resolution"
+
+#: src/libslic3r/PrintConfig.cpp:2755
+msgid "Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more detail than printers can render. Set to zero to disable any simplification and use full resolution from input. \nNote: slic3r simplify the geometry with a treshold of 0.0125mm and has an internal resolution of 0.0001mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2766
+msgid "Minimum travel after retraction"
+msgstr "Minimum travel after retraction"
+
+#: src/libslic3r/PrintConfig.cpp:2768
+msgid "Retraction is not triggered when travel moves are shorter than this length."
+msgstr "Retraction is not triggered when travel moves are shorter than this length."
+
+#: src/libslic3r/PrintConfig.cpp:2775
+msgid "Retract amount before wipe"
+msgstr "Retract amount before wipe"
+
+#: src/libslic3r/PrintConfig.cpp:2777
+msgid "With bowden extruders, it may be wise to do some amount of quick retract before doing the wipe movement."
+msgstr "With bowden extruders, it may be wise to do some amount of quick retract before doing the wipe movement."
+
+#: src/libslic3r/PrintConfig.cpp:2784
+msgid "Retract on layer change"
+msgstr "Retract on layer change"
+
+#: src/libslic3r/PrintConfig.cpp:2786
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr "This flag enforces a retraction whenever a Z move is done."
+
+#: src/libslic3r/PrintConfig.cpp:2791 src/libslic3r/PrintConfig.cpp:2808
+msgid "Length"
+msgstr "Length"
+
+#: src/libslic3r/PrintConfig.cpp:2792
+msgid "Retraction Length"
+msgstr "Retraction Length"
+
+#: src/libslic3r/PrintConfig.cpp:2794
+msgid "When retraction is triggered, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+msgstr "When retraction is triggered, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2813
+msgid "mm (zero to disable)"
+msgstr "mm (zero to disable)"
+
+#: src/libslic3r/PrintConfig.cpp:2801
+msgid "Retraction length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2803
+msgid "Override the retract_length settign from the printer config. Used for calibration. Set negative to disable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2809
+msgid "Retraction Length (Toolchange)"
+msgstr "Retraction Length (Toolchange)"
+
+#: src/libslic3r/PrintConfig.cpp:2810
+msgid "When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+msgstr "When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:2819
+msgid "Lift Z"
+msgstr "Lift Z"
+
+#: src/libslic3r/PrintConfig.cpp:2821
+msgid "If you set this to a positive value, Z is quickly raised every time a retraction is triggered. When using multiple extruders, only the setting for the first extruder will be considered."
+msgstr "If you set this to a positive value, Z is quickly raised every time a retraction is triggered. When using multiple extruders, only the setting for the first extruder will be considered."
+
+#: src/libslic3r/PrintConfig.cpp:2828
+msgid "Above Z"
+msgstr "Above Z"
+
+#: src/libslic3r/PrintConfig.cpp:2829
+msgid "Only lift Z above"
+msgstr "Only lift Z above"
+
+#: src/libslic3r/PrintConfig.cpp:2831
+msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z. You can tune this setting for skipping lift on the first layers."
+msgstr "If you set this to a positive value, Z lift will only take place above the specified absolute Z. You can tune this setting for skipping lift on the first layers."
+
+#: src/libslic3r/PrintConfig.cpp:2838
+msgid "Below Z"
+msgstr "Below Z"
+
+#: src/libslic3r/PrintConfig.cpp:2839
+msgid "Only lift Z below"
+msgstr "Only lift Z below"
+
+#: src/libslic3r/PrintConfig.cpp:2841
+msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z. You can tune this setting for limiting lift to the first layers."
+msgstr "If you set this to a positive value, Z lift will only take place below the specified absolute Z. You can tune this setting for limiting lift to the first layers."
+
+#: src/libslic3r/PrintConfig.cpp:2849
+msgid "Enforce on first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2850
+msgid "Enforce lift on first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2852
+msgid "Select this option to enforce z-lift on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2857
+msgid "On surfaces"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2858
+msgid "Lift only on"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2860
+msgid "Select this option to not use/enforce the z-lift on a top surface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2871 src/libslic3r/PrintConfig.cpp:2879
+msgid "Extra length on restart"
+msgstr "Extra length on restart"
+
+#: src/libslic3r/PrintConfig.cpp:2872
+msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed."
+msgstr "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed."
+
+#: src/libslic3r/PrintConfig.cpp:2880
+msgid "Extrat length on toolchange restart"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2881
+msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament."
+msgstr "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament."
+
+#: src/libslic3r/PrintConfig.cpp:2888 src/libslic3r/PrintConfig.cpp:2889
+msgid "Retraction Speed"
+msgstr "Retraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:2891
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr "The speed for retractions (it only applies to the extruder motor)."
+
+#: src/libslic3r/PrintConfig.cpp:2897 src/libslic3r/PrintConfig.cpp:2898
+msgid "Deretraction Speed"
+msgstr "Deretraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:2900
+msgid "The speed for loading of a filament into extruder after retraction (it only applies to the extruder motor). If left to zero, the retraction speed is used."
+msgstr "The speed for loading of a filament into extruder after retraction (it only applies to the extruder motor). If left to zero, the retraction speed is used."
+
+#: src/libslic3r/PrintConfig.cpp:2909
+msgid "Position of perimeters starting points.\n "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2916
+msgid "Cost-based"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2917
+msgid "Random"
+msgstr "Random"
+
+#: src/libslic3r/PrintConfig.cpp:2918
+msgid "Aligned"
+msgstr "Aligned"
+
+#: src/libslic3r/PrintConfig.cpp:2924
+msgid "Angle cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2925
+msgid "Seam angle cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2927
+msgid "Cost of placing the seam at a bad angle. The worst angle (max penalty) is when it's flat."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2934
+msgid "Travel cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2935
+msgid "Seam travel cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2937
+msgid "Cost of moving the extruder. The highest penalty is when the point is the farest from the position of the extruder before extruding the external periemter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2946
+msgid "Direction"
+msgstr "Direction"
+
+#: src/libslic3r/PrintConfig.cpp:2948
+msgid "Preferred direction of the seam"
+msgstr "Preferred direction of the seam"
+
+#: src/libslic3r/PrintConfig.cpp:2949
+msgid "Seam preferred direction"
+msgstr "Seam preferred direction"
+
+#: src/libslic3r/PrintConfig.cpp:2957
+msgid "Jitter"
+msgstr "Jitter"
+
+#: src/libslic3r/PrintConfig.cpp:2959
+msgid "Seam preferred direction jitter"
+msgstr "Seam preferred direction jitter"
+
+#: src/libslic3r/PrintConfig.cpp:2960
+msgid "Preferred direction of the seam - jitter"
+msgstr "Preferred direction of the seam - jitter"
+
+#: src/libslic3r/PrintConfig.cpp:2968
+msgid "Distance from object"
+msgstr "Distance from object"
+
+#: src/libslic3r/PrintConfig.cpp:2970
+msgid "Distance between skirt and object(s). Set this to zero to attach the skirt to the object(s) and get a brim for better adhesion."
+msgstr "Distance between skirt and object(s). Set this to zero to attach the skirt to the object(s) and get a brim for better adhesion."
+
+#: src/libslic3r/PrintConfig.cpp:2978
+msgid "Skirt height"
+msgstr "Skirt height"
+
+#: src/libslic3r/PrintConfig.cpp:2980
+msgid "Height of skirt expressed in layers. Set this to a tall value to use skirt as a shield against drafts."
+msgstr "Height of skirt expressed in layers. Set this to a tall value to use skirt as a shield against drafts."
+
+#: src/libslic3r/PrintConfig.cpp:2989
+msgid "Horizontal width of the skirt that will be printed around each object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2996
+msgid "Draft shield"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2997
+msgid "If enabled, the skirt will be as tall as a highest printed object. This is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3003
+msgid "Loops (minimum)"
+msgstr "Loops (minimum)"
+
+#: src/libslic3r/PrintConfig.cpp:3004
+msgid "Skirt Loops"
+msgstr "Skirt Loops"
+
+#: src/libslic3r/PrintConfig.cpp:3006
+msgid "Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set this to zero to disable skirt completely."
+msgstr "Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set this to zero to disable skirt completely."
+
+#: src/libslic3r/PrintConfig.cpp:3014
+msgid "Slow down if layer print time is below"
+msgstr "Slow down if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:3016
+msgid "If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value, if possible.\nSet to 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3029
+msgid "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:3039
+msgid "Min length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3042
+#, possible-c-format
+msgid "This set the threshold for small periemter length. Every loop with a length lower than that will be printed at small perimeter speed\nCan be a mm or a % of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3052
+msgid "Max length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3055
+#, possible-c-format
+msgid "This set the end of the threshold for small periemter length. Every periemter loop lower than that will see their speed reduced a bit, from their normal spee at this length down to small perimeter speed.\nCan be a mm or a % of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3065
+msgid "Min convex angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3066
+msgid "Curve smoothing minimum angle (convex)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3068
+msgid "Minimum (convex) angle at a vertex to enable smoothing (trying to create a curve around the vertex). 180 : nothing will be smooth, 0 : all angles will be smoothen."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3080
+msgid "Min concave angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3081
+msgid "Curve smoothing minimum angle (concave)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3083
+msgid "Minimum (concave) angle at a vertex to enable smoothing (trying to create a curve around the vertex). 180 : nothing will be smooth, 0 : all angles will be smoothen."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid "Precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3095
+msgid "Curve smoothing precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3097
+msgid "These parameter allow the slicer to smooth the angles in each layer. The precision will be at least the new precision of the curve. Set to 0 to deactivate.\nNote: as it use the polygon's edges and only work in the 2D planes, you must have a very clean or hand-made 3D model.\nIt's really only useful to smoothen functional models or very wide angles."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3109
+msgid "cutoff"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3110
+msgid "Curve smoothing cutoff dist"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Maximum distance between two points to allow adding new ones. Allow to avoid distording long strait areas. 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3120
+msgid "Solid infill threshold area"
+msgstr "Solid infill threshold area"
+
+#: src/libslic3r/PrintConfig.cpp:3122
+msgid "Force solid infill for regions having a smaller area than the specified threshold."
+msgstr "Force solid infill for regions having a smaller area than the specified threshold."
+
+#: src/libslic3r/PrintConfig.cpp:3123 src/libslic3r/PrintConfig.cpp:3989
+msgid "mm²"
+msgstr "mm²"
+
+#: src/libslic3r/PrintConfig.cpp:3129
+msgid "Solid infill extruder"
+msgstr "Solid infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:3131
+msgid "The extruder to use when printing solid infill."
+msgstr "The extruder to use when printing solid infill."
+
+#: src/libslic3r/PrintConfig.cpp:3137
+msgid "Solid infill every"
+msgstr "Solid infill every"
+
+#: src/libslic3r/PrintConfig.cpp:3139
+msgid "This feature allows to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height."
+msgstr "This feature allows to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height."
+
+#: src/libslic3r/PrintConfig.cpp:3152
+msgid "Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3162
+msgid "Solid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3165
+msgid "Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3176
+msgid "Solid layers"
+msgstr "Solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:3178
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr "Number of solid layers to generate on top and bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3185
+msgid "Minimum thickness of a top / bottom shell"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3191
+msgid "Spiral vase"
+msgstr "Spiral vase"
+
+#: src/libslic3r/PrintConfig.cpp:3193
+msgid "This feature will raise Z gradually while printing a single-walled object in order to remove any visible seam. This option requires a single perimeter, no infill, no top solid layers and no support material. You can still set any number of bottom solid layers as well as skirt/brim loops. It won't work when printing more than an object."
+msgstr "This feature will raise Z gradually while printing a single-walled object in order to remove any visible seam. This option requires a single perimeter, no infill, no top solid layers and no support material. You can still set any number of bottom solid layers as well as skirt/brim loops. It won't work when printing more than an object."
+
+#: src/libslic3r/PrintConfig.cpp:3201
+msgid "Temperature variation"
+msgstr "Temperature variation"
+
+#: src/libslic3r/PrintConfig.cpp:3202
+msgid "Temperature difference to be applied when an extruder is not active. Enables a full-height \"sacrificial\" skirt on which the nozzles are periodically wiped."
+msgstr "Temperature difference to be applied when an extruder is not active. Enables a full-height \"sacrificial\" skirt on which the nozzles are periodically wiped."
+
+#: src/libslic3r/PrintConfig.cpp:3211 src/libslic3r/PrintConfig.cpp:3228
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: src/libslic3r/PrintConfig.cpp:3213
+msgid "This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want.\n placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy]"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3231
+msgid "This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3248
+msgid "Model rounding precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3250
+msgid "This is the rounding error of the input object. It's used to align points that should be in the same line. Put 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3259
+msgid "Color change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3260
+msgid "This G-code will be used as a code for the color change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3268
+msgid "Pause Print G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3269
+msgid "This G-code will be used as a code for the pause print"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3277
+msgid "Custom G-code"
+msgstr "Custom G-code"
+
+#: src/libslic3r/PrintConfig.cpp:3278
+msgid "This G-code will be used as a custom code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3286
+msgid "Single Extruder Multi Material"
+msgstr "Single Extruder Multi Material"
+
+#: src/libslic3r/PrintConfig.cpp:3287
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr "The printer multiplexes filaments into a single hot end."
+
+#: src/libslic3r/PrintConfig.cpp:3292
+msgid "Prime all printing extruders"
+msgstr "Prime all printing extruders"
+
+#: src/libslic3r/PrintConfig.cpp:3293
+msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."
+msgstr "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."
+
+#: src/libslic3r/PrintConfig.cpp:3298
+msgid "No sparse layers (EXPERIMENTAL)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3299
+msgid "If enabled, the wipe tower will not be printed on layers with no toolchanges. On layers with a toolchange, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3306
+msgid "Generate support material"
+msgstr "Generate support material"
+
+#: src/libslic3r/PrintConfig.cpp:3308
+msgid "Enable support material generation."
+msgstr "Enable support material generation."
+
+#: src/libslic3r/PrintConfig.cpp:3312
+msgid "Auto generated supports"
+msgstr "Auto generated supports"
+
+#: src/libslic3r/PrintConfig.cpp:3314
+msgid "If checked, supports will be generated automatically based on the overhang threshold value. If unchecked, supports will be generated inside the \"Support Enforcer\" volumes only."
+msgstr "If checked, supports will be generated automatically based on the overhang threshold value. If unchecked, supports will be generated inside the \"Support Enforcer\" volumes only."
+
+#: src/libslic3r/PrintConfig.cpp:3320
+msgid "XY separation between an object and its support"
+msgstr "XY separation between an object and its support"
+
+#: src/libslic3r/PrintConfig.cpp:3322
+msgid "XY separation between an object and its support. If expressed as percentage (for example 50%), it will be calculated over external perimeter width."
+msgstr "XY separation between an object and its support. If expressed as percentage (for example 50%), it will be calculated over external perimeter width."
+
+#: src/libslic3r/PrintConfig.cpp:3332
+msgid "Pattern angle"
+msgstr "Pattern angle"
+
+#: src/libslic3r/PrintConfig.cpp:3335
+msgid "Use this setting to rotate the support material pattern on the horizontal plane."
+msgstr "Use this setting to rotate the support material pattern on the horizontal plane."
+
+#: src/libslic3r/PrintConfig.cpp:3345 src/libslic3r/PrintConfig.cpp:4577
+msgid "Only create support if it lies on a build plate. Don't create support on a print."
+msgstr "Only create support if it lies on a build plate. Don't create support on a print."
+
+#: src/libslic3r/PrintConfig.cpp:3350
+msgid "Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3353
+msgid "How to compute the vertical z-distance.\nFrom filament: it use the nearest bit of the filament. When a bridge is extruded, it goes below the current plane.\nFrom plane: it use the plane-z. Same than 'from filament' if no 'bridge' is extruded.\nNone: No z-offset. Useful for Soluble supports.\n"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3371
+#, possible-c-format
+msgid "The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the extruding width used for the interface layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3386
+#, possible-c-format
+msgid "The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the extruding width used for the interface layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3395
+msgid "Enforce support for the first"
+msgstr "Enforce support for the first"
+
+#: src/libslic3r/PrintConfig.cpp:3397
+msgid "Generate support material for the specified number of layers counting from bottom, regardless of whether normal support material is enabled or not and regardless of any angle threshold. This is useful for getting more adhesion of objects having a very thin or poor footprint on the build plate."
+msgstr "Generate support material for the specified number of layers counting from bottom, regardless of whether normal support material is enabled or not and regardless of any angle threshold. This is useful for getting more adhesion of objects having a very thin or poor footprint on the build plate."
+
+#: src/libslic3r/PrintConfig.cpp:3402
+msgid "Enforce support for the first n layers"
+msgstr "Enforce support for the first n layers"
+
+#: src/libslic3r/PrintConfig.cpp:3408
+msgid "Support material/raft/skirt extruder"
+msgstr "Support material/raft/skirt extruder"
+
+#: src/libslic3r/PrintConfig.cpp:3410
+msgid "The extruder to use when printing support material, raft and skirt (1+, 0 to use the current extruder to minimize tool changes)."
+msgstr "The extruder to use when printing support material, raft and skirt (1+, 0 to use the current extruder to minimize tool changes)."
+
+#: src/libslic3r/PrintConfig.cpp:3418
+msgid "Support material width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3420
+msgid "Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3430
+msgid "Interface loops"
+msgstr "Interface loops"
+
+#: src/libslic3r/PrintConfig.cpp:3432
+msgid "Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr "Cover the top contact layer of the supports with loops. Disabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:3437
+msgid "Support material/raft interface extruder"
+msgstr "Support material/raft interface extruder"
+
+#: src/libslic3r/PrintConfig.cpp:3439
+msgid "The extruder to use when printing support material interface (1+, 0 to use the current extruder to minimize tool changes). This affects raft too."
+msgstr "The extruder to use when printing support material interface (1+, 0 to use the current extruder to minimize tool changes). This affects raft too."
+
+#: src/libslic3r/PrintConfig.cpp:3446
+msgid "Interface layers"
+msgstr "Interface layers"
+
+#: src/libslic3r/PrintConfig.cpp:3448
+msgid "Number of interface layers to insert between the object(s) and support material."
+msgstr "Number of interface layers to insert between the object(s) and support material."
+
+#: src/libslic3r/PrintConfig.cpp:3455
+msgid "Interface pattern spacing"
+msgstr "Interface pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:3457
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr "Spacing between interface lines. Set zero to get a solid interface."
+
+#: src/libslic3r/PrintConfig.cpp:3464
+msgid "Interface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3465
+msgid "Support interface speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3467
+msgid "Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed."
+msgstr "Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed."
+
+#: src/libslic3r/PrintConfig.cpp:3477
+msgid "Support pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3479
+msgid "Pattern used to generate support material."
+msgstr "Pattern used to generate support material."
+
+#: src/libslic3r/PrintConfig.cpp:3485
+msgid "Rectilinear grid"
+msgstr "Rectilinear grid"
+
+#: src/libslic3r/PrintConfig.cpp:3492
+msgid "Support interface pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3494
+msgid "Pattern for interface layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3514
+msgid "Pattern spacing"
+msgstr "Pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:3516
+msgid "Spacing between support material lines."
+msgstr "Spacing between support material lines."
+
+#: src/libslic3r/PrintConfig.cpp:3524
+msgid "Support speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3526
+msgid "Speed for printing support material."
+msgstr "Speed for printing support material."
+
+#: src/libslic3r/PrintConfig.cpp:3533
+msgid "Synchronize with object layers"
+msgstr "Synchronize with object layers"
+
+#: src/libslic3r/PrintConfig.cpp:3535
+msgid "Synchronize support layers with the object print layers. This is useful with multi-material printers, where the extruder switch is expensive."
+msgstr "Synchronize support layers with the object print layers. This is useful with multi-material printers, where the extruder switch is expensive."
+
+#: src/libslic3r/PrintConfig.cpp:3541
+msgid "Overhang threshold"
+msgstr "Overhang threshold"
+
+#: src/libslic3r/PrintConfig.cpp:3543
+msgid "Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set to zero for automatic detection (recommended)."
+msgstr "Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set to zero for automatic detection (recommended)."
+
+#: src/libslic3r/PrintConfig.cpp:3555
+msgid "With sheath around the support"
+msgstr "With sheath around the support"
+
+#: src/libslic3r/PrintConfig.cpp:3557
+msgid "Add a sheath (a single perimeter line) around the base support. This makes the support more reliable, but also more difficult to remove."
+msgstr "Add a sheath (a single perimeter line) around the base support. This makes the support more reliable, but also more difficult to remove."
+
+#: src/libslic3r/PrintConfig.cpp:3566
+msgid "Extruder nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3569
+msgid "Nozzle temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3577
+msgid "Override the temperature of the extruder. Avoid doing too many changes, it won't stop for cooling/heating. 0 to disable. May only works on Height range modifiers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3582
+msgid "Z-lift override"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3584
+msgid "Set the new lift-z value for this override. 0 will disable the z-lift. -& to disable. May only works on Height range modifiers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3590 src/libslic3r/PrintConfig.cpp:3591
+msgid "Overlapping external perimeter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3593
+msgid "Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that their flow isn't adjusted and so it will result in over-extruding and undefined behavior."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3598 src/libslic3r/PrintConfig.cpp:3599
+msgid "Overlapping all perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3601
+msgid "Allow all perimeters to overlap, instead of just external ones."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3647
+msgid "Thin walls"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3609
+msgid "Detect single-width walls (parts where two extrusions don't fit and we need to collapse them into a single trace). If unchecked, slic3r may try to fit perimeters where it's not possible, creating some overlap leading to over-extrusion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3616
+msgid "Min width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3617
+msgid "Thin walls min width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3619
+msgid "Minimum width for the extrusion to be extruded (widths lower than the nozzle diameter will be over-extruded at the nozzle diameter). If expressed as percentage (for example 110%) it will be computed over nozzle diameter. The default behavior of slic3r and slic3rPE is with a 33% value. Put 100% to avoid any sort of over-extrusion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3628
+msgid "Overlap"
+msgstr "Overlap"
+
+#: src/libslic3r/PrintConfig.cpp:3629
+msgid "Thin wall overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3631
+msgid "Overlap between the thin wall and the perimeters. Can be a % of the external perimeter width (default 50%)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3638
+msgid "Merging with perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3639
+msgid "Thin wall merge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3641
+msgid "Allow the external perimeter to merge the thin walls in the path. You can deactivate it if you use thin walls as a custom support, to reduce adhesion a little bit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3648
+msgid "Thin walls speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3650
+msgid "Speed for thin wall (external extrusion that are alone because the obect is too thin at these places)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3657
+msgid "Threads"
+msgstr "Threads"
+
+#: src/libslic3r/PrintConfig.cpp:3658
+msgid "Threads are used to parallelize long-running tasks. Optimal threads number is slightly above the number of available cores/processors."
+msgstr "Threads are used to parallelize long-running tasks. Optimal threads number is slightly above the number of available cores/processors."
+
+#: src/libslic3r/PrintConfig.cpp:3669
+msgid "Time estimation compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3671
+#, possible-c-format
+msgid "This setting allow you to modify the time estiamtion by a % amount. As slic3r only use the marlin algorithm, it's not precise enough if an other firmware is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3678
+msgid "Tool change G-code"
+msgstr "Tool change G-code"
+
+#: src/libslic3r/PrintConfig.cpp:3680
+msgid "This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as [previous_extruder] and [next_extruder], so e.g. the standard toolchange command can be scripted as T[next_extruder]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3691
+msgid "Tool name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3693
+msgid "Only used for klipper, where you can name the extruder. If not set, will be 'extruderX' with 'X' replaced by the extruder number."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3700
+msgid "Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3711
+msgid "Top solid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3712
+msgid "Top solid speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3714
+msgid "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto."
+msgstr "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:3728
+msgid "Top layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3730
+msgid "Number of solid layers to generate on top surfaces."
+msgstr "Number of solid layers to generate on top surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:3731
+msgid "Top solid layers"
+msgstr "Top solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:3739
+msgid "The number of top solid layers is increased above top_solid_layers if necessary to satisfy minimum thickness of top shell. This is useful to prevent pillowing effect when printing with variable layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3742
+msgid "Minimum top shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3749
+msgid "Travel speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3751
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr "Speed for travel moves (jumps between distant extrusion points)."
+
+#: src/libslic3r/PrintConfig.cpp:3759
+msgid "Use firmware retraction"
+msgstr "Use firmware retraction"
+
+#: src/libslic3r/PrintConfig.cpp:3761
+msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin."
+msgstr "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:3767
+msgid "Use relative E distances"
+msgstr "Use relative E distances"
+
+#: src/libslic3r/PrintConfig.cpp:3769
+msgid "If your firmware requires relative E values, check this, otherwise leave it unchecked. Most firmwares use absolute values."
+msgstr "If your firmware requires relative E values, check this, otherwise leave it unchecked. Most firmwares use absolute values."
+
+#: src/libslic3r/PrintConfig.cpp:3775
+msgid "Use volumetric E"
+msgstr "Use volumetric E"
+
+#: src/libslic3r/PrintConfig.cpp:3777
+msgid "This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin."
+msgstr "This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:3787
+msgid "Enable variable layer height feature"
+msgstr "Enable variable layer height feature"
+
+#: src/libslic3r/PrintConfig.cpp:3789
+msgid "Some printers or printer setups may have difficulties printing with a variable layer height. Enabled by default."
+msgstr "Some printers or printer setups may have difficulties printing with a variable layer height. Enabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:3795
+msgid "Wipe while retracting"
+msgstr "Wipe while retracting"
+
+#: src/libslic3r/PrintConfig.cpp:3797
+msgid "This flag will move the nozzle while retracting to minimize the possible blob on leaky extruders."
+msgstr "This flag will move the nozzle while retracting to minimize the possible blob on leaky extruders."
+
+#: src/libslic3r/PrintConfig.cpp:3804
+msgid "Enable wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3806
+msgid "Multi material printers may need to prime or purge extruders on tool changes. Extrude the excess material into the wipe tower."
+msgstr "Multi material printers may need to prime or purge extruders on tool changes. Extrude the excess material into the wipe tower."
+
+#: src/libslic3r/PrintConfig.cpp:3812
+msgid "Purging volumes - load/unload volumes"
+msgstr "Purging volumes - load/unload volumes"
+
+#: src/libslic3r/PrintConfig.cpp:3813
+msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below. "
+msgstr "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below. "
+
+#: src/libslic3r/PrintConfig.cpp:3819
+msgid "Purging volumes - matrix"
+msgstr "Purging volumes - matrix"
+
+#: src/libslic3r/PrintConfig.cpp:3820
+msgid "This matrix describes volumes (in cubic milimetres) required to purge the new filament on the wipe tower for any given pair of tools. "
+msgstr "This matrix describes volumes (in cubic milimetres) required to purge the new filament on the wipe tower for any given pair of tools. "
+
+#: src/libslic3r/PrintConfig.cpp:3830
+msgid "Enable advanced wiping volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3831
+#, possible-c-format
+msgid "Allow slic3r to compute the purge volume via smart computations. Use the pigment% of each filament and following parameters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3836
+msgid "Nozzle volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3837
+msgid "The volume of melted plastic inside your nozlle. Used by 'advanced wiping'."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3838 src/libslic3r/PrintConfig.cpp:3854
+msgid "mm3"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3843
+msgid "Pigment percentage"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3844
+msgid "The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/natural, 0.2-0.5 for white and 1 for black."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3851
+msgid "Multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3852
+msgid "Auto-wipe multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3853
+msgid "The volume multiplier used to compute the final volume to extrude by the algorithm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3861
+msgid "Auto-wipe algorithm"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3862
+msgid "Algo for the advanced wipe.\nLinear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\nQuadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ volume_mult * (pigmentBefore-pigmentAfter)^3\nHyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / (0.5+pigmentAfter)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3870
+msgid "Linear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3871
+msgid "Quadratric"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3872
+msgid "Hyperbola"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3877
+msgid "Wipe tower brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3878
+#, possible-c-format
+msgid "Width of the brim for the wipe tower. Can be in mm of in % of the (assumed) only one nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3884
+msgid "X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3885
+msgid "Wipe tower X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3886
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr "X coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:3892
+msgid "Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3893
+msgid "Wipe tower Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3894
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr "Y coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:3901
+msgid "Wipe tower Width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3902
+msgid "Width of a wipe tower"
+msgstr "Width of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:3908
+msgid "Wipe tower rotation angle"
+msgstr "Wipe tower rotation angle"
+
+#: src/libslic3r/PrintConfig.cpp:3909
+msgid "Wipe tower rotation angle with respect to x-axis."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3916
+msgid "Wipe into this object's infill"
+msgstr "Wipe into this object's infill"
+
+#: src/libslic3r/PrintConfig.cpp:3917
+msgid "Purging after toolchange will done inside this object's infills. This lowers the amount of waste but may result in longer print time  due to additional travel moves."
+msgstr "Purging after toolchange will done inside this object's infills. This lowers the amount of waste but may result in longer print time  due to additional travel moves."
+
+#: src/libslic3r/PrintConfig.cpp:3924
+msgid "Wipe into this object"
+msgstr "Wipe into this object"
+
+#: src/libslic3r/PrintConfig.cpp:3925
+msgid "Object will be used to purge the nozzle after a toolchange to save material that would otherwise end up in the wipe tower and decrease print time. Colours of the objects will be mixed as a result."
+msgstr "Object will be used to purge the nozzle after a toolchange to save material that would otherwise end up in the wipe tower and decrease print time. Colours of the objects will be mixed as a result."
+
+#: src/libslic3r/PrintConfig.cpp:3932
+msgid "Extra Wipe for external perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3933
+msgid "When the external perimeter loop extrusion end, a wipe is done, going a bit inside the print. The number put in this setting increase the wipe by moving the nozzle again along the loop before the final wipe."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3941
+msgid "Maximal bridging distance"
+msgstr "Maximal bridging distance"
+
+#: src/libslic3r/PrintConfig.cpp:3942
+msgid "Maximal distance between supports on sparse infill sections. "
+msgstr "Maximal distance between supports on sparse infill sections. "
+
+#: src/libslic3r/PrintConfig.cpp:3948
+msgid "Outer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3949
+msgid "Outer XY size compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3951
+msgid "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'exterior' shell of the object.\n !!! it's recommended you put the same value into the 'Inner XY size compensation', unless you are sure you don't have horizontal holes. !!! "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3960
+msgid "Inner"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3961
+msgid "Inner XY size compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3963
+msgid "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'inner' shell of the object (!!! horizontal holes break the shell !!!)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3971 src/libslic3r/PrintConfig.cpp:3983
+msgid "Holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3972
+msgid "XY holes compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3974
+msgid "The convex holes will be grown / shrunk in the XY plane by the configured value (negative = inwards, positive = outwards, should be negative as the holes are always a bit smaller irl). This might be useful for fine-tuning hole sizes.\nThis setting behave the same as 'Inner XY size compensation' but only for convex shapes. It's added to 'Inner XY size compensation', it does not replace it. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3984
+msgid "XY holes threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3986
+msgid "Maximum area for the hole where the hole_size_compensation will apply fully. After that, it will decraese down to 0 for four time this area. Set to 0 to let the hole_size_compensation apply fully for all detected holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:3995
+msgid "Convert round holes to polyholes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3997
+msgid "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\nSee http://hydraraptor.blogspot.com/2011/02/polyholes.html"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4004
+msgid "Z offset"
+msgstr "Z offset"
+
+#: src/libslic3r/PrintConfig.cpp:4006
+msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)."
+msgstr "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)."
+
+#: src/libslic3r/PrintConfig.cpp:4015
+msgid "Z full step"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4016
+msgid "Set this to the height moved when your Z motor (or equivalent) turns one step.If your motor needs 200 steps to move your head/plater by 1mm, this field have to be 1/200 = 0.005.\nNote that the gcode will write the z values with 6 digits after the dot if z_step is set (it's 3 digits if it's disabled).\nPut 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4119
+msgid "Milling cutter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4121
+msgid "The milling cutter to use (unless more specific extruder settings are specified). "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4135
+msgid "Milling diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4137
+msgid "This is the diameter of your cutting tool."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4143
+msgid "Tool offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4154
+msgid "Tool z offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4156
+msgid "."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4162
+msgid "Tool z lift"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4164
+msgid "Amount of lift for travel."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4170
+msgid "G-Code to switch to this toolhead"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4172
+msgid "Put here the gcode to change the toolhead (called after the g-code T[next_extruder]). You have access to [next_extruder] and [previous_extruder]. next_extruder is the 'extruder number' of the new milling tool, it's equal to the index (begining at 0) of the milling tool plus the number of extruders. previous_extruder is the 'extruder number' of the previous tool, it may be a normal extruder, if it's below the number of extruders. The number of extruder is available at [extruder] and the number of milling tool is available at [milling_cutter]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4180
+msgid "G-Code to switch from this toolhead"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4182
+msgid "Put here the gcode to end the toolhead action, like stopping the spindle. You have access to [next_extruder] and [previous_extruder]. previous_extruder is the 'extruder number' of the current milling tool, it's equal to the index (begining at 0) of the milling tool plus the number of extruders. next_extruder is the 'extruder number' of the next tool, it may be a normal extruder, if it's below the number of extruders. The number of extruder is available at [extruder]and the number of milling tool is available at [milling_cutter]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4190
+msgid "Milling post-processing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4192
+msgid "If activated, at the end of each layer, the printer will switch to a milling head and mill the external perimeters.\nYou should set the 'Milling extra XY size' to a value high enough to have enough plastic to mill. Also, be sure that your piece is firmly glued to the bed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4198
+msgid "Milling extra XY size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4200
+msgid "This increase the size of the object by a certain amount to have enough plastic to mill. You can set a number of mm or a percentage of the calculated optimal extra width (from flow calculation)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4208
+msgid "Milling only after"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4210
+#, possible-c-format
+msgid "This setting restrict the post-process milling to a certain height, to avoid milling the bed. It can be a mm of a % of the first layer height (so it can depends of the object)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4217
+msgid "Milling Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4219
+msgid "Speed for milling tool."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4233
+msgid "Display width"
+msgstr "Display width"
+
+#: src/libslic3r/PrintConfig.cpp:4234
+msgid "Width of the display"
+msgstr "Width of the display"
+
+#: src/libslic3r/PrintConfig.cpp:4239
+msgid "Display height"
+msgstr "Display height"
+
+#: src/libslic3r/PrintConfig.cpp:4240
+msgid "Height of the display"
+msgstr "Height of the display"
+
+#: src/libslic3r/PrintConfig.cpp:4245
+msgid "Number of pixels in"
+msgstr "Number of pixels in"
+
+#: src/libslic3r/PrintConfig.cpp:4247
+msgid "Number of pixels in X"
+msgstr "Number of pixels in X"
+
+#: src/libslic3r/PrintConfig.cpp:4253
+msgid "Number of pixels in Y"
+msgstr "Number of pixels in Y"
+
+#: src/libslic3r/PrintConfig.cpp:4258
+msgid "Display horizontal mirroring"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4259
+msgid "Mirror horizontally"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4260
+msgid "Enable horizontal mirroring of output images"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4265
+msgid "Display vertical mirroring"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4266
+msgid "Mirror vertically"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4267
+msgid "Enable vertical mirroring of output images"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4272
+msgid "Display orientation"
+msgstr "Display orientation"
+
+#: src/libslic3r/PrintConfig.cpp:4273
+msgid "Set the actual LCD display orientation inside the SLA printer. Portrait mode will flip the meaning of display width and height parameters and the output images will be rotated by 90 degrees."
+msgstr "Set the actual LCD display orientation inside the SLA printer. Portrait mode will flip the meaning of display width and height parameters and the output images will be rotated by 90 degrees."
+
+#: src/libslic3r/PrintConfig.cpp:4279
+msgid "Landscape"
+msgstr "Landscape"
+
+#: src/libslic3r/PrintConfig.cpp:4280
+msgid "Portrait"
+msgstr "Portrait"
+
+#: src/libslic3r/PrintConfig.cpp:4285
+msgid "Fast"
+msgstr "Fast"
+
+#: src/libslic3r/PrintConfig.cpp:4286
+msgid "Fast tilt"
+msgstr "Fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:4287
+msgid "Time of the fast tilt"
+msgstr "Time of the fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:4294
+msgid "Slow"
+msgstr "Slow"
+
+#: src/libslic3r/PrintConfig.cpp:4295
+msgid "Slow tilt"
+msgstr "Slow tilt"
+
+#: src/libslic3r/PrintConfig.cpp:4296
+msgid "Time of the slow tilt"
+msgstr "Time of the slow tilt"
+
+#: src/libslic3r/PrintConfig.cpp:4303
+msgid "Area fill"
+msgstr "Area fill"
+
+#: src/libslic3r/PrintConfig.cpp:4304
+msgid "The percentage of the bed area. \nIf the print area exceeds the specified value, \nthen a slow tilt will be used, otherwise - a fast tilt"
+msgstr "The percentage of the bed area. \nIf the print area exceeds the specified value, \nthen a slow tilt will be used, otherwise - a fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:4311 src/libslic3r/PrintConfig.cpp:4312
+#: src/libslic3r/PrintConfig.cpp:4313
+msgid "Printer scaling correction"
+msgstr "Printer scaling correction"
+
+#: src/libslic3r/PrintConfig.cpp:4319 src/libslic3r/PrintConfig.cpp:4320
+msgid "Printer absolute correction"
+msgstr "Printer absolute correction"
+
+#: src/libslic3r/PrintConfig.cpp:4321
+msgid "Will inflate or deflate the sliced 2D polygons according to the sign of the correction."
+msgstr "Will inflate or deflate the sliced 2D polygons according to the sign of the correction."
+
+#: src/libslic3r/PrintConfig.cpp:4327
+msgid "Elephant foot minimum width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4329
+msgid "Minimum width of features to maintain when doing elephant foot compensation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4336 src/libslic3r/PrintConfig.cpp:4337
+msgid "Printer gamma correction"
+msgstr "Printer gamma correction"
+
+#: src/libslic3r/PrintConfig.cpp:4338
+msgid "This will apply a gamma correction to the rasterized 2D polygons. A gamma value of zero means thresholding with the threshold in the middle. This behaviour eliminates antialiasing without losing holes in polygons."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4350 src/libslic3r/PrintConfig.cpp:4351
+msgid "SLA material type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4362 src/libslic3r/PrintConfig.cpp:4363
+msgid "Initial layer height"
+msgstr "Initial layer height"
+
+#: src/libslic3r/PrintConfig.cpp:4369 src/libslic3r/PrintConfig.cpp:4370
+msgid "Bottle volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4371
+msgid "ml"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4376 src/libslic3r/PrintConfig.cpp:4377
+msgid "Bottle weight"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4378
+msgid "kg"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4385
+msgid "g/ml"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4392
+msgid "money/bottle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4397
+msgid "Faded layers"
+msgstr "Faded layers"
+
+#: src/libslic3r/PrintConfig.cpp:4398
+msgid "Number of the layers needed for the exposure time fade from initial exposure time to the exposure time"
+msgstr "Number of the layers needed for the exposure time fade from initial exposure time to the exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:4405 src/libslic3r/PrintConfig.cpp:4406
+msgid "Minimum exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4413 src/libslic3r/PrintConfig.cpp:4414
+msgid "Maximum exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4421 src/libslic3r/PrintConfig.cpp:4422
+msgid "Exposure time"
+msgstr "Exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:4428 src/libslic3r/PrintConfig.cpp:4429
+msgid "Minimum initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4436 src/libslic3r/PrintConfig.cpp:4437
+msgid "Maximum initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4444 src/libslic3r/PrintConfig.cpp:4445
+msgid "Initial exposure time"
+msgstr "Initial exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:4451 src/libslic3r/PrintConfig.cpp:4452
+msgid "Correction for expansion"
+msgstr "Correction for expansion"
+
+#: src/libslic3r/PrintConfig.cpp:4458
+msgid "SLA print material notes"
+msgstr "SLA print material notes"
+
+#: src/libslic3r/PrintConfig.cpp:4459
+msgid "You can put your notes regarding the SLA print material here."
+msgstr "You can put your notes regarding the SLA print material here."
+
+#: src/libslic3r/PrintConfig.cpp:4471 src/libslic3r/PrintConfig.cpp:4482
+msgid "Default SLA material profile"
+msgstr "Default SLA material profile"
+
+#: src/libslic3r/PrintConfig.cpp:4493
+msgid "Generate supports"
+msgstr "Generate supports"
+
+#: src/libslic3r/PrintConfig.cpp:4495
+msgid "Generate supports for the models"
+msgstr "Generate supports for the models"
+
+#: src/libslic3r/PrintConfig.cpp:4500
+msgid "Pinhead front diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4502
+msgid "Diameter of the pointing side of the head"
+msgstr "Diameter of the pointing side of the head"
+
+#: src/libslic3r/PrintConfig.cpp:4509
+msgid "Head penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4511
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr "How much the pinhead has to penetrate the model surface"
+
+#: src/libslic3r/PrintConfig.cpp:4518
+msgid "Pinhead width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4520
+msgid "Width from the back sphere center to the front sphere center"
+msgstr "Width from the back sphere center to the front sphere center"
+
+#: src/libslic3r/PrintConfig.cpp:4528
+msgid "Pillar diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4530
+msgid "Diameter in mm of the support pillars"
+msgstr "Diameter in mm of the support pillars"
+
+#: src/libslic3r/PrintConfig.cpp:4538
+msgid "Small pillar diameter percent"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4540
+msgid "The percentage of smaller pillars compared to the normal pillar diameter which are used in problematic areas where a normal pilla cannot fit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4549
+msgid "Max bridges on a pillar"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4551
+msgid "Maximum number of bridges that can be placed on a pillar. Bridges hold support point pinheads and connect to pillars as small branches."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4559
+msgid "Pillar connection mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4560
+msgid "Controls the bridge type between two neighboring pillars. Can be zig-zag, cross (double zig-zag) or dynamic which will automatically switch between the first two depending on the distance of the two pillars."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4568
+msgid "Zig-Zag"
+msgstr "Zig-Zag"
+
+#: src/libslic3r/PrintConfig.cpp:4569
+msgid "Cross"
+msgstr "Cross"
+
+#: src/libslic3r/PrintConfig.cpp:4570
+msgid "Dynamic"
+msgstr "Dynamic"
+
+#: src/libslic3r/PrintConfig.cpp:4582
+msgid "Pillar widening factor"
+msgstr "Pillar widening factor"
+
+#: src/libslic3r/PrintConfig.cpp:4584
+msgid "Merging bridges or pillars into another pillars can increase the radius. Zero means no increase, one means full increase."
+msgstr "Merging bridges or pillars into another pillars can increase the radius. Zero means no increase, one means full increase."
+
+#: src/libslic3r/PrintConfig.cpp:4593
+msgid "Support base diameter"
+msgstr "Support base diameter"
+
+#: src/libslic3r/PrintConfig.cpp:4595
+msgid "Diameter in mm of the pillar base"
+msgstr "Diameter in mm of the pillar base"
+
+#: src/libslic3r/PrintConfig.cpp:4603
+msgid "Support base height"
+msgstr "Support base height"
+
+#: src/libslic3r/PrintConfig.cpp:4605
+msgid "The height of the pillar base cone"
+msgstr "The height of the pillar base cone"
+
+#: src/libslic3r/PrintConfig.cpp:4612
+msgid "Support base safety distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4615
+msgid "The minimum distance of the pillar base from the model in mm. Makes sense in zero elevation mode where a gap according to this parameter is inserted between the model and the pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4625
+msgid "Critical angle"
+msgstr "Critical angle"
+
+#: src/libslic3r/PrintConfig.cpp:4627
+msgid "The default angle for connecting support sticks and junctions."
+msgstr "The default angle for connecting support sticks and junctions."
+
+#: src/libslic3r/PrintConfig.cpp:4635
+msgid "Max bridge length"
+msgstr "Max bridge length"
+
+#: src/libslic3r/PrintConfig.cpp:4637
+msgid "The max length of a bridge"
+msgstr "The max length of a bridge"
+
+#: src/libslic3r/PrintConfig.cpp:4644
+msgid "Max pillar linking distance"
+msgstr "Max pillar linking distance"
+
+#: src/libslic3r/PrintConfig.cpp:4646
+msgid "The max distance of two pillars to get linked with each other. A zero value will prohibit pillar cascading."
+msgstr "The max distance of two pillars to get linked with each other. A zero value will prohibit pillar cascading."
+
+#: src/libslic3r/PrintConfig.cpp:4656
+msgid "How much the supports should lift up the supported object. If this value is zero, the bottom of the model geometry will be considered as part of the pad.If \"Pad around object\" is enabled, this value is ignored."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4669
+msgid "This is a relative measure of support points density."
+msgstr "This is a relative measure of support points density."
+
+#: src/libslic3r/PrintConfig.cpp:4675
+msgid "Minimal distance of the support points"
+msgstr "Minimal distance of the support points"
+
+#: src/libslic3r/PrintConfig.cpp:4677
+msgid "No support points will be placed closer than this threshold."
+msgstr "No support points will be placed closer than this threshold."
+
+#: src/libslic3r/PrintConfig.cpp:4683
+msgid "Use pad"
+msgstr "Use pad"
+
+#: src/libslic3r/PrintConfig.cpp:4685
+msgid "Add a pad underneath the supported model"
+msgstr "Add a pad underneath the supported model"
+
+#: src/libslic3r/PrintConfig.cpp:4690
+msgid "Pad wall thickness"
+msgstr "Pad wall thickness"
+
+#: src/libslic3r/PrintConfig.cpp:4692
+msgid "The thickness of the pad and its optional cavity walls."
+msgstr "The thickness of the pad and its optional cavity walls."
+
+#: src/libslic3r/PrintConfig.cpp:4700
+msgid "Pad wall height"
+msgstr "Pad wall height"
+
+#: src/libslic3r/PrintConfig.cpp:4701
+msgid "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4714
+msgid "Pad brim size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4715
+msgid "How far should the pad extend around the contained geometry"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4725
+msgid "Max merge distance"
+msgstr "Max merge distance"
+
+#: src/libslic3r/PrintConfig.cpp:4727
+msgid "Some objects can get along with a few smaller pads instead of a single big one. This parameter defines how far the center of two smaller pads should be. If theyare closer, they will get merged into one pad."
+msgstr "Some objects can get along with a few smaller pads instead of a single big one. This parameter defines how far the center of two smaller pads should be. If theyare closer, they will get merged into one pad."
+
+#: src/libslic3r/PrintConfig.cpp:4747
+msgid "Pad wall slope"
+msgstr "Pad wall slope"
+
+#: src/libslic3r/PrintConfig.cpp:4749
+msgid "The slope of the pad wall relative to the bed plane. 90 degrees means straight walls."
+msgstr "The slope of the pad wall relative to the bed plane. 90 degrees means straight walls."
+
+#: src/libslic3r/PrintConfig.cpp:4760
+msgid "Create pad around object and ignore the support elevation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4765
+msgid "Pad around object everywhere"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4767
+msgid "Force pad around object everywhere"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4772
+msgid "Pad object gap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4774
+msgid "The gap between the object bottom and the generated pad in zero elevation mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4783
+msgid "Pad object connector stride"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4785
+msgid "Distance between two connector sticks which connect the object and the generated pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4792
+msgid "Pad object connector width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4794
+msgid "Width of the connector sticks which connect the object and the generated pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4801
+msgid "Pad object connector penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4804
+msgid "How much should the tiny connectors penetrate into the model body."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4811
+msgid "Enable hollowing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4813
+msgid "Hollow out a model to have an empty interior"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4818
+msgid "Wall thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4820
+msgid "Minimum wall thickness of a hollowed model."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4828
+msgid "Accuracy"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4830
+msgid "Performance vs accuracy of calculation. Lower values may produce unwanted artifacts."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4840
+msgid "Hollowing is done in two steps: first, an imaginary interior is calculated deeper (offset plus the closing distance) in the object and then it's inflated back to the specified offset. A greater closing distance makes the interior more rounded. At zero, the interior will resemble the exterior the most."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5626
+msgid "Export OBJ"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5627
+msgid "Export the model(s) as OBJ."
+msgstr "Export the model(s) as OBJ."
+
+#: src/libslic3r/PrintConfig.cpp:5639
+msgid "Export SLA"
+msgstr "Export SLA"
+
+#: src/libslic3r/PrintConfig.cpp:5640
+msgid "Slice the model and export SLA printing layers as PNG."
+msgstr "Slice the model and export SLA printing layers as PNG."
+
+#: src/libslic3r/PrintConfig.cpp:5645
+msgid "Export 3MF"
+msgstr "Export 3MF"
+
+#: src/libslic3r/PrintConfig.cpp:5646
+msgid "Export the model(s) as 3MF."
+msgstr "Export the model(s) as 3MF."
+
+#: src/libslic3r/PrintConfig.cpp:5650
+msgid "Export AMF"
+msgstr "Export AMF"
+
+#: src/libslic3r/PrintConfig.cpp:5651
+msgid "Export the model(s) as AMF."
+msgstr "Export the model(s) as AMF."
+
+#: src/libslic3r/PrintConfig.cpp:5655
+msgid "Export STL"
+msgstr "Export STL"
+
+#: src/libslic3r/PrintConfig.cpp:5656
+msgid "Export the model(s) as STL."
+msgstr "Export the model(s) as STL."
+
+#: src/libslic3r/PrintConfig.cpp:5661
+msgid "Slice the model and export toolpaths as G-code."
+msgstr "Slice the model and export toolpaths as G-code."
+
+#: src/libslic3r/PrintConfig.cpp:5666
+msgid "G-code viewer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5667
+msgid "Visualize an already sliced and saved G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5672
+msgid "Slice"
+msgstr "Slice"
+
+#: src/libslic3r/PrintConfig.cpp:5673
+msgid "Slice the model as FFF or SLA based on the printer_technology configuration value."
+msgstr "Slice the model as FFF or SLA based on the printer_technology configuration value."
+
+#: src/libslic3r/PrintConfig.cpp:5678
+msgid "Help"
+msgstr "Help"
+
+#: src/libslic3r/PrintConfig.cpp:5679
+msgid "Show this help."
+msgstr "Show this help."
+
+#: src/libslic3r/PrintConfig.cpp:5684
+msgid "Help (FFF options)"
+msgstr "Help (FFF options)"
+
+#: src/libslic3r/PrintConfig.cpp:5685
+msgid "Show the full list of print/G-code configuration options."
+msgstr "Show the full list of print/G-code configuration options."
+
+#: src/libslic3r/PrintConfig.cpp:5689
+msgid "Help (SLA options)"
+msgstr "Help (SLA options)"
+
+#: src/libslic3r/PrintConfig.cpp:5690
+msgid "Show the full list of SLA print configuration options."
+msgstr "Show the full list of SLA print configuration options."
+
+#: src/libslic3r/PrintConfig.cpp:5694
+msgid "Output Model Info"
+msgstr "Output Model Info"
+
+#: src/libslic3r/PrintConfig.cpp:5695
+msgid "Write information about the model to the console."
+msgstr "Write information about the model to the console."
+
+#: src/libslic3r/PrintConfig.cpp:5699
+msgid "Save config file"
+msgstr "Save config file"
+
+#: src/libslic3r/PrintConfig.cpp:5700
+msgid "Save configuration to the specified file."
+msgstr "Save configuration to the specified file."
+
+#: src/libslic3r/PrintConfig.cpp:5710
+msgid "Align XY"
+msgstr "Align XY"
+
+#: src/libslic3r/PrintConfig.cpp:5711
+msgid "Align the model to the given point."
+msgstr "Align the model to the given point."
+
+#: src/libslic3r/PrintConfig.cpp:5716
+msgid "Cut model at the given Z."
+msgstr "Cut model at the given Z."
+
+#: src/libslic3r/PrintConfig.cpp:5740
+msgid "Center"
+msgstr "Center"
+
+#: src/libslic3r/PrintConfig.cpp:5741
+msgid "Center the print around the given center."
+msgstr "Center the print around the given center."
+
+#: src/libslic3r/PrintConfig.cpp:5745
+msgid "Don't arrange"
+msgstr "Don't arrange"
+
+#: src/libslic3r/PrintConfig.cpp:5746
+msgid "Do not rearrange the given models before merging and keep their original XY coordinates."
+msgstr "Do not rearrange the given models before merging and keep their original XY coordinates."
+
+#: src/libslic3r/PrintConfig.cpp:5749
+msgid "Duplicate"
+msgstr "Duplicate"
+
+#: src/libslic3r/PrintConfig.cpp:5750
+msgid "Multiply copies by this factor."
+msgstr "Multiply copies by this factor."
+
+#: src/libslic3r/PrintConfig.cpp:5754
+msgid "Duplicate by grid"
+msgstr "Duplicate by grid"
+
+#: src/libslic3r/PrintConfig.cpp:5755
+msgid "Multiply copies by creating a grid."
+msgstr "Multiply copies by creating a grid."
+
+#: src/libslic3r/PrintConfig.cpp:5759
+msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once."
+msgstr "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once."
+
+#: src/libslic3r/PrintConfig.cpp:5764
+msgid "Try to repair any non-manifold meshes (this option is implicitly added whenever we need to slice the model to perform the requested action)."
+msgstr "Try to repair any non-manifold meshes (this option is implicitly added whenever we need to slice the model to perform the requested action)."
+
+#: src/libslic3r/PrintConfig.cpp:5768
+msgid "Rotation angle around the Z axis in degrees."
+msgstr "Rotation angle around the Z axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:5772
+msgid "Rotate around X"
+msgstr "Rotate around X"
+
+#: src/libslic3r/PrintConfig.cpp:5773
+msgid "Rotation angle around the X axis in degrees."
+msgstr "Rotation angle around the X axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:5777
+msgid "Rotate around Y"
+msgstr "Rotate around Y"
+
+#: src/libslic3r/PrintConfig.cpp:5778
+msgid "Rotation angle around the Y axis in degrees."
+msgstr "Rotation angle around the Y axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:5783
+msgid "Scaling factor or percentage."
+msgstr "Scaling factor or percentage."
+
+#: src/libslic3r/PrintConfig.cpp:5788
+msgid "Detect unconnected parts in the given model(s) and split them into separate objects."
+msgstr "Detect unconnected parts in the given model(s) and split them into separate objects."
+
+#: src/libslic3r/PrintConfig.cpp:5791
+msgid "Scale to Fit"
+msgstr "Scale to Fit"
+
+#: src/libslic3r/PrintConfig.cpp:5792
+msgid "Scale to fit the given volume."
+msgstr "Scale to fit the given volume."
+
+#: src/libslic3r/PrintConfig.cpp:5801
+msgid "Ignore non-existent config files"
+msgstr "Ignore non-existent config files"
+
+#: src/libslic3r/PrintConfig.cpp:5802
+msgid "Do not fail if a file supplied to --load does not exist."
+msgstr "Do not fail if a file supplied to --load does not exist."
+
+#: src/libslic3r/PrintConfig.cpp:5805
+msgid "Load config file"
+msgstr "Load config file"
+
+#: src/libslic3r/PrintConfig.cpp:5806
+msgid "Load configuration from the specified file. It can be used more than once to load options from multiple files."
+msgstr "Load configuration from the specified file. It can be used more than once to load options from multiple files."
+
+#: src/libslic3r/PrintConfig.cpp:5809
+msgid "Output File"
+msgstr "Output File"
+
+#: src/libslic3r/PrintConfig.cpp:5810
+msgid "The file where the output will be written (if not specified, it will be based on the input file)."
+msgstr "The file where the output will be written (if not specified, it will be based on the input file)."
+
+#: src/libslic3r/PrintConfig.cpp:5815
+msgid "If enabled, the command line arguments are sent to an existing instance of GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides the \"single_instance\" configuration value from application preferences."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5826
+msgid "Data directory"
+msgstr "Data directory"
+
+#: src/libslic3r/PrintConfig.cpp:5827
+msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage."
+msgstr "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage."
+
+#: src/libslic3r/PrintConfig.cpp:5830
+msgid "Logging level"
+msgstr "Logging level"
+
+#: src/libslic3r/PrintConfig.cpp:5831
+msgid "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\nFor example. loglevel=2 logs fatal, error and warning level messages."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5837
+msgid "Render with a software renderer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5838
+msgid "Render with a software renderer. The bundled MESA software renderer is loaded instead of the default OpenGL driver."
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:27
+msgid "Error with zip archive"
+msgstr "Error with zip archive"
+
+#: src/libslic3r/PrintObject.cpp:117
+msgid "Processing triangulated mesh"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:278
+msgid "Generating perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:396
+msgid "Preparing infill"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:582
+msgid "Generating support material"
+msgstr ""
diff --git a/resources/localization/he_IL/PrusaSlicer.mo b/resources/localization/he_IL/PrusaSlicer.mo
new file mode 100644
index 00000000000..ba1966d28c7
Binary files /dev/null and b/resources/localization/he_IL/PrusaSlicer.mo differ
diff --git a/resources/localization/he_IL/PrusaSlicer_he.po b/resources/localization/he_IL/PrusaSlicer_he.po
new file mode 100644
index 00000000000..9e533558606
--- /dev/null
+++ b/resources/localization/he_IL/PrusaSlicer_he.po
@@ -0,0 +1,7940 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-04-09 14:34+0200\n"
+"PO-Revision-Date: 2019-04-09 15:04+0200\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
+"Language-Team: \n"
+"X-Generator: Poedit 2.0.8\n"
+
+#: src/slic3r/GUI/AboutDialog.cpp:35
+msgid "About Slic3r"
+msgstr "About Slic3r"
+
+#: src/slic3r/GUI/AboutDialog.cpp:64 src/slic3r/GUI/MainFrame.cpp:52
+msgid "Version"
+msgstr "Version"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:43
+msgid "Shape"
+msgstr "Shape"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:51
+msgid "Rectangular"
+msgstr "Rectangular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:55
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:118 src/slic3r/GUI/Plater.cpp:136
+#: src/slic3r/GUI/Tab.cpp:2185
+msgid "Size"
+msgstr "Size"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:56
+msgid "Size in X and Y of the rectangular plate."
+msgstr "Size in X and Y of the rectangular plate."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:62
+msgid "Origin"
+msgstr "Origin"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:63
+msgid ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+msgstr ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:67
+msgid "Circular"
+msgstr "Circular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/slic3r/GUI/ConfigWizard.cpp:111
+#: src/slic3r/GUI/ConfigWizard.cpp:544 src/slic3r/GUI/ConfigWizard.cpp:558
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115
+#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84
+#: src/libslic3r/PrintConfig.cpp:59 src/libslic3r/PrintConfig.cpp:66
+#: src/libslic3r/PrintConfig.cpp:75 src/libslic3r/PrintConfig.cpp:209
+#: src/libslic3r/PrintConfig.cpp:284 src/libslic3r/PrintConfig.cpp:292
+#: src/libslic3r/PrintConfig.cpp:342 src/libslic3r/PrintConfig.cpp:352
+#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:483
+#: src/libslic3r/PrintConfig.cpp:501 src/libslic3r/PrintConfig.cpp:679
+#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1226
+#: src/libslic3r/PrintConfig.cpp:1244 src/libslic3r/PrintConfig.cpp:1262
+#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1324
+#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1453
+#: src/libslic3r/PrintConfig.cpp:1494 src/libslic3r/PrintConfig.cpp:1502
+#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1520
+#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1611
+#: src/libslic3r/PrintConfig.cpp:1827 src/libslic3r/PrintConfig.cpp:1897
+#: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:2123
+#: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2137
+#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2177
+#: src/libslic3r/PrintConfig.cpp:2187 src/libslic3r/PrintConfig.cpp:2293
+#: src/libslic3r/PrintConfig.cpp:2368 src/libslic3r/PrintConfig.cpp:2377
+#: src/libslic3r/PrintConfig.cpp:2386 src/libslic3r/PrintConfig.cpp:2396
+#: src/libslic3r/PrintConfig.cpp:2440 src/libslic3r/PrintConfig.cpp:2450
+#: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479
+#: src/libslic3r/PrintConfig.cpp:2488 src/libslic3r/PrintConfig.cpp:2506
+#: src/libslic3r/PrintConfig.cpp:2521 src/libslic3r/PrintConfig.cpp:2532
+#: src/libslic3r/PrintConfig.cpp:2545 src/libslic3r/PrintConfig.cpp:2555
+msgid "mm"
+msgstr "mm"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:71 src/libslic3r/PrintConfig.cpp:676
+msgid "Diameter"
+msgstr "Diameter"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:72
+msgid ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+msgstr ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:76 src/slic3r/GUI/GUI_Preview.cpp:239
+#: src/libslic3r/GCode/PreviewData.cpp:175
+msgid "Custom"
+msgstr "Custom"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:80
+msgid "Load shape from STL..."
+msgstr "Load shape from STL..."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:126
+msgid "Settings"
+msgstr "Settings"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:299
+msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:1252
+msgid "Error! "
+msgstr "Error! "
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:325
+msgid "The selected file contains no geometry."
+msgstr "The selected file contains no geometry."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:329
+msgid ""
+"The selected file contains several disjoint areas. This is not supported."
+msgstr ""
+"The selected file contains several disjoint areas. This is not supported."
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:507
+msgid "Bed Shape"
+msgstr "Bed Shape"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:55
+msgid "Network lookup"
+msgstr "Network lookup"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:72
+msgid "Address"
+msgstr "Address"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:73
+msgid "Hostname"
+msgstr "Hostname"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:74
+msgid "Service name"
+msgstr "Service name"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:76
+msgid "OctoPrint version"
+msgstr "OctoPrint version"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:218
+msgid "Searching for devices"
+msgstr "Searching for devices"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:225
+msgid "Finished"
+msgstr "Finished"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:15
+msgid "Buttons And Text Colors Description"
+msgstr "Buttons And Text Colors Description"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:40
+msgid "Value is the same as the system value"
+msgstr "Value is the same as the system value"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:57
+msgid ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+msgstr ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:17
+msgid "Upgrade"
+msgstr "Upgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
+msgid "Before roll back"
+msgstr "Before roll back"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
+msgid "User"
+msgstr "User"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26
+msgid "Unknown"
+msgstr "Unknown"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:38
+msgid "Active: "
+msgstr "Active: "
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
+msgid "slic3r version"
+msgstr "slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45 src/slic3r/GUI/Preset.cpp:1250
+msgid "print"
+msgstr "print"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46
+msgid "filaments"
+msgstr "filaments"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47 src/slic3r/GUI/Preset.cpp:1254
+msgid "printer"
+msgstr "printer"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Tab.cpp:872
+msgid "vendor"
+msgstr "vendor"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
+msgid "version"
+msgstr "version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
+msgid "min slic3r version"
+msgstr "min slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54
+msgid "max slic3r version"
+msgstr "max slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
+msgid "model"
+msgstr "model"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
+msgid "variants"
+msgstr "variants"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
+msgid "Incompatible with this Slic3r"
+msgstr "Incompatible with this Slic3r"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
+msgid "Activate"
+msgstr "Activate"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:98
+msgid "Configuration Snapshots"
+msgstr "Configuration Snapshots"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:111
+msgid "nozzle"
+msgstr "nozzle"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:115
+msgid "Alternate nozzles:"
+msgstr "Alternate nozzles:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:181
+msgid "All standard"
+msgstr "All standard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:182 src/slic3r/GUI/Tab.cpp:2909
+msgid "All"
+msgstr "All"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:183 src/slic3r/GUI/Plater.cpp:414
+#: src/libslic3r/GCode/PreviewData.cpp:162
+msgid "None"
+msgstr "None"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:284
+#, c-format
+msgid "Welcome to the Slic3r %s"
+msgstr "Welcome to the Slic3r %s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:284
+msgid "Welcome"
+msgstr "Welcome"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:288 src/slic3r/GUI/GUI_App.cpp:600
+#, c-format
+msgid "Run %s"
+msgstr "Run %s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:290
+#, c-format
+msgid ""
+"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
+"configuration; just a few settings and you will be ready to print."
+msgstr ""
+"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
+"configuration; just a few settings and you will be ready to print."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:294
+msgid ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+msgstr ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:325
+#, c-format
+msgid "%s Family"
+msgstr "%s Family"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:362
+msgid "Custom Printer Setup"
+msgstr "Custom Printer Setup"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:362
+msgid "Custom Printer"
+msgstr "Custom Printer"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:364
+msgid "Define a custom printer profile"
+msgstr "Define a custom printer profile"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:366
+msgid "Custom profile name:"
+msgstr "Custom profile name:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:390
+msgid "Automatic updates"
+msgstr "Automatic updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:390
+msgid "Updates"
+msgstr "Updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:398 src/slic3r/GUI/Preferences.cpp:59
+msgid "Check for application updates"
+msgstr "Check for application updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:401 src/slic3r/GUI/Preferences.cpp:61
+msgid ""
+"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
+"version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+msgstr ""
+"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
+"version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:405 src/slic3r/GUI/Preferences.cpp:67
+msgid "Update built-in Presets automatically"
+msgstr "Update built-in Presets automatically"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:408 src/slic3r/GUI/Preferences.cpp:69
+msgid ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+msgstr ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:409
+msgid ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+msgstr ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:414
+msgid ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+msgstr ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:421
+msgid "Other Vendors"
+msgstr "Other Vendors"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:423
+msgid "Pick another vendor supported by Slic3r PE:"
+msgstr "Pick another vendor supported by Slic3r PE:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:469
+msgid "Firmware Type"
+msgstr "Firmware Type"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:469 src/slic3r/GUI/Tab.cpp:1870
+msgid "Firmware"
+msgstr "Firmware"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:473
+msgid "Choose the type of firmware used by your printer."
+msgstr "Choose the type of firmware used by your printer."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:507
+msgid "Bed Shape and Size"
+msgstr "Bed Shape and Size"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:510
+msgid "Set the shape of your printer's bed."
+msgstr "Set the shape of your printer's bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:524
+msgid "Filament and Nozzle Diameters"
+msgstr "Filament and Nozzle Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:524
+msgid "Print Diameters"
+msgstr "Print Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:540
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr "Enter the diameter of your printer's hot end nozzle."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:543
+msgid "Nozzle Diameter:"
+msgstr "Nozzle Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:553
+msgid "Enter the diameter of your filament."
+msgstr "Enter the diameter of your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:554
+msgid ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+msgstr ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:557
+msgid "Filament Diameter:"
+msgstr "Filament Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:575
+msgid "Extruder and Bed Temperatures"
+msgstr "Extruder and Bed Temperatures"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:575
+msgid "Temperatures"
+msgstr "Temperatures"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:591
+msgid "Enter the temperature needed for extruding your filament."
+msgstr "Enter the temperature needed for extruding your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:592
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:595
+msgid "Extrusion Temperature:"
+msgstr "Extrusion Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:596 src/slic3r/GUI/ConfigWizard.cpp:610
+msgid "°C"
+msgstr "°C"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:605
+msgid ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+msgstr ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:606
+msgid ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+msgstr ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:609
+msgid "Bed Temperature:"
+msgstr "Bed Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1001
+msgid "Select all standard printers"
+msgstr "Select all standard printers"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1004
+msgid "< &Back"
+msgstr "< &Back"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1005
+msgid "&Next >"
+msgstr "&Next >"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1006
+msgid "&Finish"
+msgstr "&Finish"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1007 src/slic3r/GUI/FirmwareDialog.cpp:142
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
+#: src/slic3r/GUI/ProgressStatusBar.cpp:28
+msgid "Cancel"
+msgstr "Cancel"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1021
+msgid "Prusa FFF Technology Printers"
+msgstr "Prusa FFF Technology Printers"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1024
+msgid "Prusa MSLA Technology Printers"
+msgstr "Prusa MSLA Technology Printers"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1111
+msgid "Configuration Wizard"
+msgstr "Configuration Wizard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1112
+msgid "Configuration &Wizard"
+msgstr "Configuration &Wizard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1114
+msgid "Configuration Assistant"
+msgstr "Configuration Assistant"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1115
+msgid "Configuration &Assistant"
+msgstr "Configuration &Assistant"
+
+#: src/slic3r/GUI/Field.cpp:112
+msgid "default value"
+msgstr "default value"
+
+#: src/slic3r/GUI/Field.cpp:115
+msgid "parameter name"
+msgstr "parameter name"
+
+#: src/slic3r/GUI/Field.cpp:143
+#, c-format
+msgid "%s doesn't support percentage"
+msgstr "%s doesn't support percentage"
+
+#: src/slic3r/GUI/Field.cpp:157 src/slic3r/GUI/Field.cpp:180
+msgid "Invalid numeric input."
+msgstr "Invalid numeric input."
+
+#: src/slic3r/GUI/Field.cpp:162
+msgid "Input value is out of range"
+msgstr "Input value is out of range"
+
+#: src/slic3r/GUI/Field.cpp:188
+#, c-format
+msgid ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+msgstr ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+
+#: src/slic3r/GUI/Field.cpp:191
+msgid "Parameter validation"
+msgstr "Parameter validation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:141
+msgid "Flash!"
+msgstr "Flash!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:143
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr "Flashing in progress. Please do not disconnect the printer!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:187
+msgid "Flashing failed: "
+msgstr "Flashing failed: "
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:268
+msgid "Flashing succeeded!"
+msgstr "Flashing succeeded!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:269
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr "Flashing failed. Please see the avrdude log below."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:270
+msgid "Flashing cancelled."
+msgstr "Flashing cancelled."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:308
+#, c-format
+msgid ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+msgstr ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:395 src/slic3r/GUI/FirmwareDialog.cpp:431
+#, c-format
+msgid ""
+"Multiple %s devices found. Please only connect one at a time for flashing."
+msgstr ""
+"Multiple %s devices found. Please only connect one at a time for flashing."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:412
+#, c-format
+msgid ""
+"The %s device was not found.\n"
+"If the device is connected, please press the Reset button next to the USB "
+"connector ..."
+msgstr ""
+"The %s device was not found.\n"
+"If the device is connected, please press the Reset button next to the USB "
+"connector ..."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:525
+#, c-format
+msgid "The %s device could not have been found"
+msgstr "The %s device could not have been found"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:603
+#, c-format
+msgid "Error accessing port at %s: %s"
+msgstr "Error accessing port at %s: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:605
+#, c-format
+msgid "Error: %s"
+msgstr "Error: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:735
+msgid "Firmware flasher"
+msgstr "Firmware flasher"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:762
+msgid "Firmware image:"
+msgstr "Firmware image:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:766
+msgid "Serial port:"
+msgstr "Serial port:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:768
+msgid "Autodetected"
+msgstr "Autodetected"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:769
+msgid "Rescan"
+msgstr "Rescan"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:776
+msgid "Progress:"
+msgstr "Progress:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:779
+msgid "Status:"
+msgstr "Status:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:780
+msgid "Ready"
+msgstr "Ready"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:800
+msgid "Advanced: Output log"
+msgstr "Advanced: Output log"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:811
+#: src/slic3r/GUI/PrintHostDialogs.cpp:161
+msgid "Close"
+msgstr "Close"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:859
+msgid ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+msgstr ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:860
+msgid "Confirmation"
+msgstr "Confirmation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:863
+msgid "Cancelling..."
+msgstr "Cancelling..."
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:709
+msgid "Detected object outside print volume"
+msgstr "Detected object outside print volume"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:710
+msgid "Detected toolpath outside print volume"
+msgstr "Detected toolpath outside print volume"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:711
+msgid "Some objects are not visible when editing supports"
+msgstr "Some objects are not visible when editing supports"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:713
+msgid ""
+"Detected object outside print volume\n"
+"Resolve a clash to continue slicing/export process correctly"
+msgstr ""
+"Detected object outside print volume\n"
+"Resolve a clash to continue slicing/export process correctly"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
+msgid "Rotate lower part upwards"
+msgstr "Rotate lower part upwards"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
+msgid "Perform cut"
+msgstr "Perform cut"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43
+msgid "Cut object:"
+msgstr "Cut object:"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
+msgid "Cut [C]"
+msgstr "Cut [C]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3006
+msgid "Cut"
+msgstr "Cut"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
+msgid "Keep upper part"
+msgstr "Keep upper part"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
+msgid "Keep lower part"
+msgstr "Keep lower part"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
+msgid "Place on face [F]"
+msgstr "Place on face [F]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
+msgid "Move [M]"
+msgstr "Move [M]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176
+msgid "Position (mm)"
+msgstr "Position (mm)"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176
+msgid "Displacement (mm)"
+msgstr "Displacement (mm)"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
+msgid "Rotate [R]"
+msgstr "Rotate [R]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
+msgid "Rotation (deg)"
+msgstr "Rotation (deg)"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
+msgid "Scale [S]"
+msgstr "Scale [S]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
+msgid "Scale (%)"
+msgstr "Scale (%)"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:597
+msgid "Left mouse click - add point"
+msgstr "Left mouse click - add point"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:598
+msgid "Right mouse click - remove point"
+msgstr "Right mouse click - remove point"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:599
+msgid "Shift + Left (+ drag) - select point(s)"
+msgstr "Shift + Left (+ drag) - select point(s)"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:606
+msgid "Head diameter: "
+msgstr "Head diameter: "
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:618
+msgid "Lock supports under new islands"
+msgstr "Lock supports under new islands"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:622
+msgid "Remove selected points"
+msgstr "Remove selected points"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:626
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:679
+msgid "Remove all points"
+msgstr "Remove all points"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:631
+msgid "Apply changes"
+msgstr "Apply changes"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:636
+msgid "Discard changes"
+msgstr "Discard changes"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:644
+msgid "Minimal points distance: "
+msgstr "Minimal points distance: "
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:655
+msgid "Support points density: "
+msgstr "Support points density: "
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:669
+msgid "Auto-generate points [A]"
+msgstr "Auto-generate points [A]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:675
+msgid "Manual editing [M]"
+msgstr "Manual editing [M]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:738
+msgid "SLA Support Points [L]"
+msgstr "SLA Support Points [L]"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:767
+msgid "Do you want to save your manually edited support points ?\n"
+msgstr "Do you want to save your manually edited support points ?\n"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:768
+msgid "Save changes?"
+msgstr "Save changes?"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
+msgid ""
+"Autogeneration will erase all manually edited points.\n"
+"\n"
+"Are you sure you want to do it?\n"
+msgstr ""
+"Autogeneration will erase all manually edited points.\n"
+"\n"
+"Are you sure you want to do it?\n"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:899 src/slic3r/GUI/GUI.cpp:288
+#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
+msgid "Warning"
+msgstr "Warning"
+
+#: src/slic3r/GUI/GUI.cpp:147 src/slic3r/GUI/Tab.cpp:2720
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr "It's impossible to print multi-part object(s) with SLA technology."
+
+#: src/slic3r/GUI/GUI.cpp:148
+msgid "Please check and fix your object list."
+msgstr "Please check and fix your object list."
+
+#: src/slic3r/GUI/GUI.cpp:149 src/slic3r/GUI/GUI_App.cpp:679
+#: src/slic3r/GUI/Tab.cpp:2722
+msgid "Attention!"
+msgstr "Attention!"
+
+#: src/slic3r/GUI/GUI.cpp:282
+msgid "Notice"
+msgstr "Notice"
+
+#: src/slic3r/GUI/GUI_App.cpp:318
+msgid "Changing of an application language"
+msgstr "Changing of an application language"
+
+#: src/slic3r/GUI/GUI_App.cpp:326 src/slic3r/GUI/GUI_App.cpp:335
+msgid "Recreating"
+msgstr "Recreating"
+
+#: src/slic3r/GUI/GUI_App.cpp:339
+msgid "Loading of a current presets"
+msgstr "Loading of a current presets"
+
+#: src/slic3r/GUI/GUI_App.cpp:347
+msgid "Loading of a mode view"
+msgstr "Loading of a mode view"
+
+#: src/slic3r/GUI/GUI_App.cpp:429
+msgid "Choose one file (3MF):"
+msgstr "Choose one file (3MF):"
+
+#: src/slic3r/GUI/GUI_App.cpp:441
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/GUI_App.cpp:454
+msgid "Array of language names and identifiers should have the same size."
+msgstr "Array of language names and identifiers should have the same size."
+
+#: src/slic3r/GUI/GUI_App.cpp:464
+msgid "Select the language"
+msgstr "Select the language"
+
+#: src/slic3r/GUI/GUI_App.cpp:464
+msgid "Language"
+msgstr "Language"
+
+#: src/slic3r/GUI/GUI_App.cpp:534 src/slic3r/GUI/GUI_ObjectList.cpp:1067
+#: src/libslic3r/PrintConfig.cpp:298
+msgid "Default"
+msgstr "Default"
+
+#: src/slic3r/GUI/GUI_App.cpp:603
+msgid "&Configuration Snapshots"
+msgstr "&Configuration Snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:603
+msgid "Inspect / activate configuration snapshots"
+msgstr "Inspect / activate configuration snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:604
+msgid "Take Configuration &Snapshot"
+msgstr "Take Configuration &Snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:604
+msgid "Capture a configuration snapshot"
+msgstr "Capture a configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:607
+msgid "&Preferences"
+msgstr "&Preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:613
+msgid "Application preferences"
+msgstr "Application preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:616 src/slic3r/GUI/wxExtensions.cpp:2446
+msgid "Simple"
+msgstr "Simple"
+
+#: src/slic3r/GUI/GUI_App.cpp:616
+msgid "Simple View Mode"
+msgstr "Simple View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:73
+#: src/slic3r/GUI/Tab.cpp:977 src/slic3r/GUI/Tab.cpp:992
+#: src/slic3r/GUI/Tab.cpp:1090 src/slic3r/GUI/Tab.cpp:1093
+#: src/slic3r/GUI/Tab.cpp:1466 src/slic3r/GUI/Tab.cpp:1890
+#: src/slic3r/GUI/Tab.cpp:3347 src/slic3r/GUI/wxExtensions.cpp:2447
+#: src/libslic3r/PrintConfig.cpp:72 src/libslic3r/PrintConfig.cpp:186
+#: src/libslic3r/PrintConfig.cpp:349 src/libslic3r/PrintConfig.cpp:987
+#: src/libslic3r/PrintConfig.cpp:2173
+msgid "Advanced"
+msgstr "Advanced"
+
+#: src/slic3r/GUI/GUI_App.cpp:617
+msgid "Advanced View Mode"
+msgstr "Advanced View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:618 src/slic3r/GUI/wxExtensions.cpp:2448
+msgid "Expert"
+msgstr "Expert"
+
+#: src/slic3r/GUI/GUI_App.cpp:618
+msgid "Expert View Mode"
+msgstr "Expert View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:623
+msgid "Mode"
+msgstr "Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:623
+msgid "Slic3r View Mode"
+msgstr "Slic3r View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:625
+msgid "Change Application &Language"
+msgstr "Change Application &Language"
+
+#: src/slic3r/GUI/GUI_App.cpp:627
+msgid "Flash printer &firmware"
+msgstr "Flash printer &firmware"
+
+#: src/slic3r/GUI/GUI_App.cpp:627
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr "Upload a firmware image into an Arduino based printer"
+
+#: src/slic3r/GUI/GUI_App.cpp:639
+msgid "Taking configuration snapshot"
+msgstr "Taking configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:639
+msgid "Snapshot name"
+msgstr "Snapshot name"
+
+#: src/slic3r/GUI/GUI_App.cpp:676
+msgid "Application will be restarted after language change."
+msgstr "Application will be restarted after language change."
+
+#: src/slic3r/GUI/GUI_App.cpp:677
+msgid "3D-Scene will be cleaned."
+msgstr "3D-Scene will be cleaned."
+
+#: src/slic3r/GUI/GUI_App.cpp:678
+msgid "Please, check your changes before."
+msgstr "Please, check your changes before."
+
+#: src/slic3r/GUI/GUI_App.cpp:706
+msgid "&Configuration"
+msgstr "&Configuration"
+
+#: src/slic3r/GUI/GUI_App.cpp:726
+msgid "You have unsaved changes "
+msgstr "You have unsaved changes "
+
+#: src/slic3r/GUI/GUI_App.cpp:726
+msgid ". Discard changes and continue anyway?"
+msgstr ". Discard changes and continue anyway?"
+
+#: src/slic3r/GUI/GUI_App.cpp:727
+msgid "Unsaved Presets"
+msgstr "Unsaved Presets"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:65
+#: src/libslic3r/PrintConfig.cpp:56 src/libslic3r/PrintConfig.cpp:149
+#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:437
+#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:841
+#: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:1304
+#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1551
+#: src/libslic3r/PrintConfig.cpp:1986 src/libslic3r/PrintConfig.cpp:2042
+msgid "Layers and Perimeters"
+msgstr "Layers and Perimeters"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:66
+#: src/slic3r/GUI/Plater.cpp:431 src/slic3r/GUI/Tab.cpp:981
+#: src/slic3r/GUI/Tab.cpp:982 src/slic3r/GUI/Tab.cpp:1311
+#: src/libslic3r/PrintConfig.cpp:166 src/libslic3r/PrintConfig.cpp:388
+#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:742
+#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:932
+#: src/libslic3r/PrintConfig.cpp:942 src/libslic3r/PrintConfig.cpp:960
+#: src/libslic3r/PrintConfig.cpp:978 src/libslic3r/PrintConfig.cpp:997
+#: src/libslic3r/PrintConfig.cpp:1658 src/libslic3r/PrintConfig.cpp:1675
+msgid "Infill"
+msgstr "Infill"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:67
+#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1010
+#: src/slic3r/GUI/Tab.cpp:1011 src/libslic3r/PrintConfig.cpp:333
+#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1779
+#: src/libslic3r/PrintConfig.cpp:1785 src/libslic3r/PrintConfig.cpp:1793
+#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1815
+#: src/libslic3r/PrintConfig.cpp:1823 src/libslic3r/PrintConfig.cpp:1838
+#: src/libslic3r/PrintConfig.cpp:1859 src/libslic3r/PrintConfig.cpp:1870
+#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:1895
+#: src/libslic3r/PrintConfig.cpp:1904 src/libslic3r/PrintConfig.cpp:1915
+#: src/libslic3r/PrintConfig.cpp:1929 src/libslic3r/PrintConfig.cpp:1937
+#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1947
+#: src/libslic3r/PrintConfig.cpp:1955 src/libslic3r/PrintConfig.cpp:1969
+#: src/libslic3r/GCode/PreviewData.cpp:172
+msgid "Support material"
+msgstr "Support material"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:69
+#: src/slic3r/GUI/Tab.cpp:1070 src/slic3r/GUI/Tab.cpp:1794
+#: src/libslic3r/PrintConfig.cpp:455 src/libslic3r/PrintConfig.cpp:953
+#: src/libslic3r/PrintConfig.cpp:1339 src/libslic3r/PrintConfig.cpp:1667
+#: src/libslic3r/PrintConfig.cpp:1851 src/libslic3r/PrintConfig.cpp:1877
+#: src/libslic3r/PrintConfig.cpp:2149 src/libslic3r/PrintConfig.cpp:2157
+msgid "Extruders"
+msgstr "Extruders"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:39
+msgid "Pad and Support"
+msgstr "Pad and Support"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:68 src/slic3r/GUI/GUI_Preview.cpp:215
+#: src/slic3r/GUI/Tab.cpp:1035 src/libslic3r/PrintConfig.cpp:198
+#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:870
+#: src/libslic3r/PrintConfig.cpp:998 src/libslic3r/PrintConfig.cpp:1360
+#: src/libslic3r/PrintConfig.cpp:1597 src/libslic3r/PrintConfig.cpp:1646
+#: src/libslic3r/PrintConfig.cpp:1697 src/libslic3r/PrintConfig.cpp:2028
+msgid "Speed"
+msgstr "Speed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:70 src/libslic3r/PrintConfig.cpp:415
+#: src/libslic3r/PrintConfig.cpp:522 src/libslic3r/PrintConfig.cpp:829
+#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1348
+#: src/libslic3r/PrintConfig.cpp:1687 src/libslic3r/PrintConfig.cpp:1860
+#: src/libslic3r/PrintConfig.cpp:2017
+msgid "Extrusion Width"
+msgstr "Extrusion Width"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:75 src/slic3r/GUI/Plater.cpp:410
+#: src/slic3r/GUI/Tab.cpp:3309 src/slic3r/GUI/Tab.cpp:3310
+#: src/libslic3r/PrintConfig.cpp:2359 src/libslic3r/PrintConfig.cpp:2366
+#: src/libslic3r/PrintConfig.cpp:2375 src/libslic3r/PrintConfig.cpp:2384
+#: src/libslic3r/PrintConfig.cpp:2394 src/libslic3r/PrintConfig.cpp:2420
+#: src/libslic3r/PrintConfig.cpp:2427 src/libslic3r/PrintConfig.cpp:2438
+#: src/libslic3r/PrintConfig.cpp:2448 src/libslic3r/PrintConfig.cpp:2457
+#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2476
+#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
+#: src/libslic3r/PrintConfig.cpp:2504
+msgid "Supports"
+msgstr "Supports"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:76 src/slic3r/GUI/Tab.cpp:3337
+#: src/slic3r/GUI/Tab.cpp:3338 src/libslic3r/PrintConfig.cpp:2512
+#: src/libslic3r/PrintConfig.cpp:2519 src/libslic3r/PrintConfig.cpp:2530
+#: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2553
+#: src/libslic3r/PrintConfig.cpp:2562
+msgid "Pad"
+msgstr "Pad"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:173
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:45
+msgid "Name"
+msgstr "Name"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:201
+msgid "Right button click the icon to change the object settings"
+msgstr "Right button click the icon to change the object settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:209
+#, c-format
+msgid "Auto-repaired (%d errors):\n"
+msgstr "Auto-repaired (%d errors):\n"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:212
+msgid "degenerate facets"
+msgstr "degenerate facets"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:213
+msgid "edges fixed"
+msgstr "edges fixed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:214
+msgid "facets removed"
+msgstr "facets removed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:215
+msgid "facets added"
+msgstr "facets added"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:216
+msgid "facets reversed"
+msgstr "facets reversed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:217
+msgid "backwards edges"
+msgstr "backwards edges"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:231
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr "Right button click the icon to fix STL through Netfabb"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:278 src/slic3r/GUI/Tab.cpp:1430
+#: src/libslic3r/PrintConfig.cpp:454
+msgid "Extruder"
+msgstr "Extruder"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:683 src/slic3r/GUI/GUI_ObjectList.cpp:963
+#: src/slic3r/GUI/GUI_ObjectList.cpp:969 src/slic3r/GUI/GUI_ObjectList.cpp:1199
+#, c-format
+msgid "Quick Add Settings (%s)"
+msgstr "Quick Add Settings (%s)"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:746
+msgid "Select showing settings"
+msgstr "Select showing settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:874
+msgid "Load"
+msgstr "Load"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:879 src/slic3r/GUI/GUI_ObjectList.cpp:911
+#: src/slic3r/GUI/GUI_ObjectList.cpp:914
+msgid "Box"
+msgstr "Box"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:879
+msgid "Cylinder"
+msgstr "Cylinder"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:879
+msgid "Sphere"
+msgstr "Sphere"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:879
+msgid "Slab"
+msgstr "Slab"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:890 src/slic3r/GUI/GUI_ObjectList.cpp:906
+msgid "Add part"
+msgstr "Add part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:891
+msgid "Add modifier"
+msgstr "Add modifier"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:892 src/slic3r/GUI/GUI_ObjectList.cpp:910
+msgid "Add support enforcer"
+msgstr "Add support enforcer"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:893 src/slic3r/GUI/GUI_ObjectList.cpp:913
+msgid "Add support blocker"
+msgstr "Add support blocker"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:934
+msgid "Split to parts"
+msgstr "Split to parts"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:942
+msgid "Add settings"
+msgstr "Add settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1009
+msgid "Change type"
+msgstr "Change type"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1016
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1153
+msgid "Set as a Separated Object"
+msgstr "Set as a Separated Object"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1024
+msgid "Rename"
+msgstr "Rename"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1034
+msgid "Fix through the Netfabb"
+msgstr "Fix through the Netfabb"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1041 src/slic3r/GUI/Plater.cpp:2861
+msgid "Export as STL"
+msgstr "Export as STL"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1048
+msgid "Change extruder"
+msgstr "Change extruder"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1073
+msgid "Select new extruder for the object/part"
+msgstr "Select new extruder for the object/part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1079 src/slic3r/GUI/Plater.cpp:2825
+#: src/slic3r/GUI/Plater.cpp:2843 src/slic3r/GUI/Tab.cpp:2860
+msgid "Delete"
+msgstr "Delete"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1153
+msgid "Set as a Separated Objects"
+msgstr "Set as a Separated Objects"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
+msgid "Generic"
+msgstr "Generic"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1516
+msgid "You can't delete the last solid part from object."
+msgstr "You can't delete the last solid part from object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1533
+msgid "You can't delete the last intance from object."
+msgstr "You can't delete the last intance from object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1560 src/slic3r/GUI/Plater.cpp:2219
+msgid ""
+"The selected object couldn't be split because it contains only one part."
+msgstr ""
+"The selected object couldn't be split because it contains only one part."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1676
+msgid "Group manipulation"
+msgstr "Group manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1688
+msgid "Object manipulation"
+msgstr "Object manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1698
+msgid "Object Settings to modify"
+msgstr "Object Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1702
+msgid "Part Settings to modify"
+msgstr "Part Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1711
+msgid "Part manipulation"
+msgstr "Part manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1717
+msgid "Instance manipulation"
+msgstr "Instance manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
+msgid "Object or Instance"
+msgstr "Object or Instance"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
+msgid "Part"
+msgstr "Part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2242
+msgid "Unsupported selection"
+msgstr "Unsupported selection"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2243
+#, c-format
+msgid "You started your selection with %s Item."
+msgstr "You started your selection with %s Item."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2244
+#, c-format
+msgid "In this mode you can select only other %s Items%s"
+msgstr "In this mode you can select only other %s Items%s"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2247
+msgid "of a current Object"
+msgstr "of a current Object"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2252
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2325 src/slic3r/GUI/Plater.cpp:117
+msgid "Info"
+msgstr "Info"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2366
+msgid "You can't change a type of the last solid part of the object."
+msgstr "You can't change a type of the last solid part of the object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2373
+msgid "Select type of part"
+msgstr "Select type of part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
+msgid "Enter new name"
+msgstr "Enter new name"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
+msgid "Renaming"
+msgstr "Renaming"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2554
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2632 src/slic3r/GUI/Tab.cpp:3191
+#: src/slic3r/GUI/Tab.cpp:3195
+msgid "The supplied name is not valid;"
+msgstr "The supplied name is not valid;"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2555
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2633 src/slic3r/GUI/Tab.cpp:3192
+msgid "the following characters are not allowed:"
+msgstr "the following characters are not allowed:"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2653
+msgid "Set extruder for selected items"
+msgstr "Set extruder for selected items"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2654
+msgid "Select extruder number for selected objects and/or parts"
+msgstr "Select extruder number for selected objects and/or parts"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2667
+msgid "Select extruder number:"
+msgstr "Select extruder number:"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2668
+msgid "This extruder will be set for selected items"
+msgstr "This extruder will be set for selected items"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:25
+msgid "Object Manipulation"
+msgstr "Object Manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:47
+msgid "Object name"
+msgstr "Object name"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:160
+msgid "Position"
+msgstr "Position"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:116
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
+msgid "Rotation"
+msgstr "Rotation"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:117
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221
+#: src/libslic3r/PrintConfig.cpp:3070
+msgid "Scale"
+msgstr "Scale"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:162
+msgid "Scale factors"
+msgstr "Scale factors"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:200
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:220
+#: src/libslic3r/PrintConfig.cpp:3055
+msgid "Rotate"
+msgstr "Rotate"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
+msgid "Translate"
+msgstr "Translate"
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
+msgid "Additional Settings"
+msgstr "Additional Settings"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:209
+msgid "View"
+msgstr "View"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:525
+#: src/libslic3r/GCode/PreviewData.cpp:394
+msgid "Feature type"
+msgstr "Feature type"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:467
+msgid "Height"
+msgstr "Height"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2135
+msgid "Width"
+msgstr "Width"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:216
+msgid "Volumetric flow rate"
+msgstr "Volumetric flow rate"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315
+#: src/slic3r/GUI/GUI_Preview.cpp:469 src/slic3r/GUI/GUI_Preview.cpp:525
+#: src/slic3r/GUI/GUI_Preview.cpp:701 src/libslic3r/GCode/PreviewData.cpp:404
+msgid "Tool"
+msgstr "Tool"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:523
+#: src/libslic3r/GCode/PreviewData.cpp:406
+msgid "Color Print"
+msgstr "Color Print"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:221
+msgid "Show"
+msgstr "Show"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225
+msgid "Feature types"
+msgstr "Feature types"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163
+msgid "Perimeter"
+msgstr "Perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164
+msgid "External perimeter"
+msgstr "External perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165
+msgid "Overhang perimeter"
+msgstr "Overhang perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166
+msgid "Internal infill"
+msgstr "Internal infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1686
+#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/GCode/PreviewData.cpp:167
+msgid "Solid infill"
+msgstr "Solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2016
+#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/GCode/PreviewData.cpp:168
+msgid "Top solid infill"
+msgstr "Top solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169
+msgid "Bridge infill"
+msgstr "Bridge infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:869
+#: src/libslic3r/GCode/PreviewData.cpp:170
+msgid "Gap fill"
+msgstr "Gap fill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1001
+#: src/libslic3r/GCode/PreviewData.cpp:171
+msgid "Skirt"
+msgstr "Skirt"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1903
+#: src/libslic3r/GCode/PreviewData.cpp:173
+msgid "Support material interface"
+msgstr "Support material interface"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1081
+#: src/libslic3r/GCode/PreviewData.cpp:174
+msgid "Wipe tower"
+msgstr "Wipe tower"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2049
+msgid "Travel"
+msgstr "Travel"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:244
+msgid "Retractions"
+msgstr "Retractions"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:245
+msgid "Unretractions"
+msgstr "Unretractions"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:246
+msgid "Shells"
+msgstr "Shells"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:13
+msgid "Slic3r Prusa Edition - Keyboard Shortcuts"
+msgstr "Slic3r Prusa Edition - Keyboard Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
+msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
+msgstr "Open project STL/OBJ/AMF/3MF with config, delete bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
+msgstr "Import STL/OBJ/AMF/3MF without config, keep bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
+msgid "Load Config from .ini/amf/3mf/gcode"
+msgstr "Load Config from .ini/amf/3mf/gcode"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103 src/slic3r/GUI/Plater.cpp:725
+#: src/slic3r/GUI/Plater.cpp:3673 src/libslic3r/PrintConfig.cpp:2957
+msgid "Export G-code"
+msgstr "Export G-code"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
+msgid "Save project (3MF)"
+msgstr "Save project (3MF)"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Load Config from .ini/amf/3mf/gcode and merge"
+msgstr "Load Config from .ini/amf/3mf/gcode and merge"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
+msgid "(Re)slice"
+msgstr "(Re)slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
+msgid "Quick slice"
+msgstr "Quick slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/MainFrame.cpp:326
+msgid "Repeat last quick slice"
+msgstr "Repeat last quick slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+msgid "Select Plater Tab"
+msgstr "Select Plater Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
+msgid "Quick slice and Save as"
+msgstr "Quick slice and Save as"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "Select Print Settings Tab"
+msgstr "Select Print Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
+msgid "Select Filament Settings Tab"
+msgstr "Select Filament Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+msgid "Select Printer Settings Tab"
+msgstr "Select Printer Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Switch to 3D"
+msgstr "Switch to 3D"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+msgid "Switch to Preview"
+msgstr "Switch to Preview"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Preferences.cpp:10
+msgid "Preferences"
+msgstr "Preferences"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
+#: src/slic3r/GUI/PrintHostDialogs.cpp:134
+msgid "Print host upload queue"
+msgstr "Print host upload queue"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+msgid "Camera view "
+msgstr "Camera view "
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Add Instance to selected object "
+msgstr "Add Instance to selected object "
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Remove Instance from selected object"
+msgstr "Remove Instance from selected object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Show keyboard shortcuts list"
+msgstr "Show keyboard shortcuts list"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+msgid "Select multiple object/Move multiple object"
+msgstr "Select multiple object/Move multiple object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Main Shortcuts"
+msgstr "Main Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+msgid "Arrange"
+msgstr "Arrange"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
+msgid "Select All objects"
+msgstr "Select All objects"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+msgid "Delete selected"
+msgstr "Delete selected"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+msgid "Delete All"
+msgstr "Delete All"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+msgid "Gizmo move"
+msgstr "Gizmo move"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Gizmo scale"
+msgstr "Gizmo scale"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+msgid "Gizmo rotate"
+msgstr "Gizmo rotate"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Gizmo cut"
+msgstr "Gizmo cut"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+msgid "Gizmo Place face on bed"
+msgstr "Gizmo Place face on bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+msgid "Gizmo SLA support points"
+msgstr "Gizmo SLA support points"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+#, no-c-format
+msgid ""
+"Press to snap by 5% in Gizmo scale\n"
+"or by 1mm in Gizmo move"
+msgstr ""
+"Press to snap by 5% in Gizmo scale\n"
+"or by 1mm in Gizmo move"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+msgid ""
+"Press to scale or rotate selected objects\n"
+"around their own center"
+msgstr ""
+"Press to scale or rotate selected objects\n"
+"around their own center"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+msgid "Zoom to Bed"
+msgstr "Zoom to Bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+msgid "Zoom to all objects in scene, if none selected"
+msgstr "Zoom to all objects in scene, if none selected"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Zoom to selected object"
+msgstr "Zoom to selected object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Zoom in"
+msgstr "Zoom in"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Zoom out"
+msgstr "Zoom out"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Unselect gizmo, keep object selection"
+msgstr "Unselect gizmo, keep object selection"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Plater Shortcuts"
+msgstr "Plater Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
+msgid "Arrow Up"
+msgstr "Arrow Up"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+msgid "Upper Layer"
+msgstr "Upper Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+msgid "Arrow Down"
+msgstr "Arrow Down"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+msgid "Lower Layer"
+msgstr "Lower Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+msgid "Preview Shortcuts"
+msgstr "Preview Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
+msgid "Move current slider thump Up"
+msgstr "Move current slider thump Up"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+msgid "Move current slider thump Down"
+msgstr "Move current slider thump Down"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+msgid "Arrow Left"
+msgstr "Arrow Left"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+msgid "Set upper thumb to current slider thumb"
+msgstr "Set upper thumb to current slider thumb"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
+msgid "Arrow Right"
+msgstr "Arrow Right"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
+msgid "Set lower thumb to current slider thumb"
+msgstr "Set lower thumb to current slider thumb"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
+msgid "Add color change marker for current layer"
+msgstr "Add color change marker for current layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
+msgid "Delete color change marker for current layer"
+msgstr "Delete color change marker for current layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+msgid "Layers Slider Shortcuts"
+msgstr "Layers Slider Shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:54
+msgid ""
+" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
+msgstr ""
+" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
+
+#: src/slic3r/GUI/MainFrame.cpp:160
+msgid "Plater"
+msgstr "Plater"
+
+#: src/slic3r/GUI/MainFrame.cpp:273
+msgid "&Open Project"
+msgstr "&Open Project"
+
+#: src/slic3r/GUI/MainFrame.cpp:273
+msgid "Open a project file"
+msgstr "Open a project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:275
+msgid "&Save Project"
+msgstr "&Save Project"
+
+#: src/slic3r/GUI/MainFrame.cpp:275
+msgid "Save current project file"
+msgstr "Save current project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Save Project &as"
+msgstr "Save Project &as"
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Save current project file as"
+msgstr "Save current project file as"
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr "Import STL/OBJ/AM&F/3MF"
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Load a model"
+msgstr "Load a model"
+
+#: src/slic3r/GUI/MainFrame.cpp:286
+msgid "Import &Config"
+msgstr "Import &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:286
+msgid "Load exported configuration file"
+msgstr "Load exported configuration file"
+
+#: src/slic3r/GUI/MainFrame.cpp:288
+msgid "Import Config from &project"
+msgstr "Import Config from &project"
+
+#: src/slic3r/GUI/MainFrame.cpp:288
+msgid "Load configuration from project file"
+msgstr "Load configuration from project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:291
+msgid "Import Config &Bundle"
+msgstr "Import Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:291
+msgid "Load presets from a bundle"
+msgstr "Load presets from a bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:293
+msgid "&Import"
+msgstr "&Import"
+
+#: src/slic3r/GUI/MainFrame.cpp:296
+msgid "Export &G-code"
+msgstr "Export &G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:296
+msgid "Export current plate as G-code"
+msgstr "Export current plate as G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:299
+msgid "Export plate as &STL"
+msgstr "Export plate as &STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:299
+msgid "Export current plate as STL"
+msgstr "Export current plate as STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:301
+msgid "Export plate as &AMF"
+msgstr "Export plate as &AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:301
+msgid "Export current plate as AMF"
+msgstr "Export current plate as AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:304
+msgid "Export &Config"
+msgstr "Export &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:304
+msgid "Export current configuration to file"
+msgstr "Export current configuration to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:306
+msgid "Export Config &Bundle"
+msgstr "Export Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:306
+msgid "Export all presets to file"
+msgstr "Export all presets to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:308
+msgid "&Export"
+msgstr "&Export"
+
+#: src/slic3r/GUI/MainFrame.cpp:314
+msgid "Quick Slice"
+msgstr "Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:314
+msgid "Slice a file into a G-code"
+msgstr "Slice a file into a G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:320
+msgid "Quick Slice and Save As"
+msgstr "Quick Slice and Save As"
+
+#: src/slic3r/GUI/MainFrame.cpp:320
+msgid "Slice a file into a G-code, save as"
+msgstr "Slice a file into a G-code, save as"
+
+#: src/slic3r/GUI/MainFrame.cpp:326
+msgid "Repeat Last Quick Slice"
+msgstr "Repeat Last Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:334
+msgid "(Re)Slice &Now"
+msgstr "(Re)Slice &Now"
+
+#: src/slic3r/GUI/MainFrame.cpp:334
+msgid "Start new slicing process"
+msgstr "Start new slicing process"
+
+#: src/slic3r/GUI/MainFrame.cpp:337
+msgid "&Repair STL file"
+msgstr "&Repair STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:337
+msgid "Automatically repair an STL file"
+msgstr "Automatically repair an STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:340
+msgid "&Quit"
+msgstr "&Quit"
+
+#: src/slic3r/GUI/MainFrame.cpp:340
+msgid "Quit Slic3r"
+msgstr "Quit Slic3r"
+
+#: src/slic3r/GUI/MainFrame.cpp:374
+msgid "&Select all"
+msgstr "&Select all"
+
+#: src/slic3r/GUI/MainFrame.cpp:374
+msgid "Selects all objects"
+msgstr "Selects all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "&Delete selected"
+msgstr "&Delete selected"
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "Deletes the current selection"
+msgstr "Deletes the current selection"
+
+#: src/slic3r/GUI/MainFrame.cpp:379
+msgid "Delete &all"
+msgstr "Delete &all"
+
+#: src/slic3r/GUI/MainFrame.cpp:379
+msgid "Deletes all objects"
+msgstr "Deletes all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "&Plater Tab"
+msgstr "&Plater Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "Show the plater"
+msgstr "Show the plater"
+
+#: src/slic3r/GUI/MainFrame.cpp:399
+msgid "P&rint Settings Tab"
+msgstr "P&rint Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:399
+msgid "Show the print settings"
+msgstr "Show the print settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:401
+msgid "&Filament Settings Tab"
+msgstr "&Filament Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:401
+msgid "Show the filament settings"
+msgstr "Show the filament settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:403
+msgid "Print&er Settings Tab"
+msgstr "Print&er Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:403
+msgid "Show the printer settings"
+msgstr "Show the printer settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:407
+msgid "3&D"
+msgstr "3&D"
+
+#: src/slic3r/GUI/MainFrame.cpp:407
+msgid "Show the 3D editing view"
+msgstr "Show the 3D editing view"
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Pre&view"
+msgstr "Pre&view"
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Show the 3D slices preview"
+msgstr "Show the 3D slices preview"
+
+#: src/slic3r/GUI/MainFrame.cpp:430
+msgid "Print &Host Upload Queue"
+msgstr "Print &Host Upload Queue"
+
+#: src/slic3r/GUI/MainFrame.cpp:430
+msgid "Display the Print Host Upload Queue window"
+msgstr "Display the Print Host Upload Queue window"
+
+#: src/slic3r/GUI/MainFrame.cpp:439
+msgid "Iso"
+msgstr "Iso"
+
+#: src/slic3r/GUI/MainFrame.cpp:439
+msgid "Iso View"
+msgstr "Iso View"
+
+#: src/slic3r/GUI/MainFrame.cpp:441
+msgid "Top"
+msgstr "Top"
+
+#: src/libslic3r/PrintConfig.cpp:2041
+msgctxt "Layers"
+msgid "Top"
+msgstr "Top"
+
+#: src/slic3r/GUI/MainFrame.cpp:441
+msgid "Top View"
+msgstr "Top View"
+
+#: src/slic3r/GUI/MainFrame.cpp:442
+msgid "Bottom"
+msgstr "Bottom"
+
+#: src/libslic3r/PrintConfig.cpp:148
+msgctxt "Layers"
+msgid "Bottom"
+msgstr "Bottom"
+
+#: src/slic3r/GUI/MainFrame.cpp:442
+msgid "Bottom View"
+msgstr "Bottom View"
+
+#: src/slic3r/GUI/MainFrame.cpp:443
+msgid "Front"
+msgstr "Front"
+
+#: src/slic3r/GUI/MainFrame.cpp:443
+msgid "Front View"
+msgstr "Front View"
+
+#: src/slic3r/GUI/MainFrame.cpp:444 src/libslic3r/PrintConfig.cpp:1561
+msgid "Rear"
+msgstr "Rear"
+
+#: src/slic3r/GUI/MainFrame.cpp:444
+msgid "Rear View"
+msgstr "Rear View"
+
+#: src/slic3r/GUI/MainFrame.cpp:445
+msgid "Left"
+msgstr "Left"
+
+#: src/slic3r/GUI/MainFrame.cpp:445
+msgid "Left View"
+msgstr "Left View"
+
+#: src/slic3r/GUI/MainFrame.cpp:446
+msgid "Right"
+msgstr "Right"
+
+#: src/slic3r/GUI/MainFrame.cpp:446
+msgid "Right View"
+msgstr "Right View"
+
+#: src/slic3r/GUI/MainFrame.cpp:460
+msgid "Prusa 3D &Drivers"
+msgstr "Prusa 3D &Drivers"
+
+#: src/slic3r/GUI/MainFrame.cpp:460
+msgid "Open the Prusa3D drivers download page in your browser"
+msgstr "Open the Prusa3D drivers download page in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:462
+msgid "Prusa Edition &Releases"
+msgstr "Prusa Edition &Releases"
+
+#: src/slic3r/GUI/MainFrame.cpp:462
+msgid "Open the Prusa Edition releases page in your browser"
+msgstr "Open the Prusa Edition releases page in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:468
+msgid "Slic3r &Website"
+msgstr "Slic3r &Website"
+
+#: src/slic3r/GUI/MainFrame.cpp:468
+msgid "Open the Slic3r website in your browser"
+msgstr "Open the Slic3r website in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:470
+msgid "Slic3r &Manual"
+msgstr "Slic3r &Manual"
+
+#: src/slic3r/GUI/MainFrame.cpp:470
+msgid "Open the Slic3r manual in your browser"
+msgstr "Open the Slic3r manual in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:473
+msgid "System &Info"
+msgstr "System &Info"
+
+#: src/slic3r/GUI/MainFrame.cpp:473
+msgid "Show system information"
+msgstr "Show system information"
+
+#: src/slic3r/GUI/MainFrame.cpp:475
+msgid "Show &Configuration Folder"
+msgstr "Show &Configuration Folder"
+
+#: src/slic3r/GUI/MainFrame.cpp:475
+msgid "Show user configuration folder (datadir)"
+msgstr "Show user configuration folder (datadir)"
+
+#: src/slic3r/GUI/MainFrame.cpp:477
+msgid "Report an I&ssue"
+msgstr "Report an I&ssue"
+
+#: src/slic3r/GUI/MainFrame.cpp:477
+msgid "Report an issue on the Slic3r Prusa Edition"
+msgstr "Report an issue on the Slic3r Prusa Edition"
+
+#: src/slic3r/GUI/MainFrame.cpp:479
+msgid "&About Slic3r"
+msgstr "&About Slic3r"
+
+#: src/slic3r/GUI/MainFrame.cpp:479
+msgid "Show about dialog"
+msgstr "Show about dialog"
+
+#: src/slic3r/GUI/MainFrame.cpp:482
+msgid "Keyboard Shortcuts"
+msgstr "Keyboard Shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:482
+msgid "Show the list of the keyboard shortcuts"
+msgstr "Show the list of the keyboard shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:490
+msgid "&File"
+msgstr "&File"
+
+#: src/slic3r/GUI/MainFrame.cpp:491
+msgid "&Edit"
+msgstr "&Edit"
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid "&Window"
+msgstr "&Window"
+
+#: src/slic3r/GUI/MainFrame.cpp:493
+msgid "&View"
+msgstr "&View"
+
+#: src/slic3r/GUI/MainFrame.cpp:496
+msgid "&Help"
+msgstr "&Help"
+
+#: src/slic3r/GUI/MainFrame.cpp:524
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/MainFrame.cpp:538
+msgid "No previously sliced file."
+msgstr "No previously sliced file."
+
+#: src/slic3r/GUI/MainFrame.cpp:539 src/slic3r/GUI/PrintHostDialogs.cpp:219
+msgid "Error"
+msgstr "Error"
+
+#: src/slic3r/GUI/MainFrame.cpp:544
+msgid "Previously sliced file ("
+msgstr "Previously sliced file ("
+
+#: src/slic3r/GUI/MainFrame.cpp:544
+msgid ") not found."
+msgstr ") not found."
+
+#: src/slic3r/GUI/MainFrame.cpp:545
+msgid "File Not Found"
+msgstr "File Not Found"
+
+#: src/slic3r/GUI/MainFrame.cpp:580 src/slic3r/GUI/Tab.cpp:3152
+msgid "Save "
+msgstr "Save "
+
+#: src/slic3r/GUI/MainFrame.cpp:580
+msgid "SVG"
+msgstr "SVG"
+
+#: src/slic3r/GUI/MainFrame.cpp:580
+msgid "G-code"
+msgstr "G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:580
+msgid " file as:"
+msgstr " file as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:595
+msgid "Save zip file as:"
+msgstr "Save zip file as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:2352
+#: src/slic3r/GUI/Plater.cpp:3467 src/slic3r/GUI/Tab.cpp:1110
+#: src/slic3r/GUI/Tab.cpp:3348
+msgid "Slicing"
+msgstr "Slicing"
+
+#: src/slic3r/GUI/MainFrame.cpp:607
+msgid "Processing "
+msgstr "Processing "
+
+#: src/slic3r/GUI/MainFrame.cpp:630
+msgid " was successfully sliced."
+msgstr " was successfully sliced."
+
+#: src/slic3r/GUI/MainFrame.cpp:632
+msgid "Slicing Done!"
+msgstr "Slicing Done!"
+
+#: src/slic3r/GUI/MainFrame.cpp:647
+msgid "Select the STL file to repair:"
+msgstr "Select the STL file to repair:"
+
+#: src/slic3r/GUI/MainFrame.cpp:661
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr "Save OBJ file (less prone to coordinate errors than STL) as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:676
+msgid "Your file was repaired."
+msgstr "Your file was repaired."
+
+#: src/slic3r/GUI/MainFrame.cpp:676 src/libslic3r/PrintConfig.cpp:3051
+msgid "Repair"
+msgstr "Repair"
+
+#: src/slic3r/GUI/MainFrame.cpp:690
+msgid "Save configuration as:"
+msgstr "Save configuration as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:710 src/slic3r/GUI/MainFrame.cpp:774
+msgid "Select configuration to load:"
+msgstr "Select configuration to load:"
+
+#: src/slic3r/GUI/MainFrame.cpp:747
+msgid "Save presets bundle as:"
+msgstr "Save presets bundle as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:798
+#, c-format
+msgid "%d presets successfully imported."
+msgstr "%d presets successfully imported."
+
+#: src/slic3r/GUI/MsgDialog.cpp:71
+msgid "Slic3r error"
+msgstr "Slic3r error"
+
+#: src/slic3r/GUI/MsgDialog.cpp:71
+msgid "Slic3r has encountered an error"
+msgstr "Slic3r has encountered an error"
+
+#: src/slic3r/GUI/Plater.cpp:137
+msgid "Volume"
+msgstr "Volume"
+
+#: src/slic3r/GUI/Plater.cpp:138
+msgid "Facets"
+msgstr "Facets"
+
+#: src/slic3r/GUI/Plater.cpp:139
+msgid "Materials"
+msgstr "Materials"
+
+#: src/slic3r/GUI/Plater.cpp:142
+msgid "Manifold"
+msgstr "Manifold"
+
+#: src/slic3r/GUI/Plater.cpp:188
+msgid "Sliced Info"
+msgstr "Sliced Info"
+
+#: src/slic3r/GUI/Plater.cpp:207 src/slic3r/GUI/Plater.cpp:998
+msgid "Used Filament (m)"
+msgstr "Used Filament (m)"
+
+#: src/slic3r/GUI/Plater.cpp:208
+msgid "Used Filament (mm³)"
+msgstr "Used Filament (mm³)"
+
+#: src/slic3r/GUI/Plater.cpp:209
+msgid "Used Filament (g)"
+msgstr "Used Filament (g)"
+
+#: src/slic3r/GUI/Plater.cpp:210
+msgid "Used Material (unit)"
+msgstr "Used Material (unit)"
+
+#: src/slic3r/GUI/Plater.cpp:211 src/slic3r/GUI/Plater.cpp:1013
+#: src/libslic3r/PrintConfig.cpp:716
+msgid "Cost"
+msgstr "Cost"
+
+#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:985
+#: src/slic3r/GUI/Plater.cpp:1027
+msgid "Estimated printing time"
+msgstr "Estimated printing time"
+
+#: src/slic3r/GUI/Plater.cpp:213
+msgid "Number of tool changes"
+msgstr "Number of tool changes"
+
+#: src/slic3r/GUI/Plater.cpp:290
+msgid "Click to edit preset"
+msgstr "Click to edit preset"
+
+#: src/slic3r/GUI/Plater.cpp:413
+msgid "Select what kind of support do you need"
+msgstr "Select what kind of support do you need"
+
+#: src/slic3r/GUI/Plater.cpp:415 src/libslic3r/PrintConfig.cpp:1814
+#: src/libslic3r/PrintConfig.cpp:2419
+msgid "Support on build plate only"
+msgstr "Support on build plate only"
+
+#: src/slic3r/GUI/Plater.cpp:416
+msgid "Everywhere"
+msgstr "Everywhere"
+
+#: src/slic3r/GUI/Plater.cpp:438 src/slic3r/GUI/Tab.cpp:1007
+msgid "Brim"
+msgstr "Brim"
+
+#: src/slic3r/GUI/Plater.cpp:440
+msgid ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+
+#: src/slic3r/GUI/Plater.cpp:448
+msgid "Purging volumes"
+msgstr "Purging volumes"
+
+#: src/slic3r/GUI/Plater.cpp:673
+msgid "Print settings"
+msgstr "Print settings"
+
+#: src/slic3r/GUI/Plater.cpp:674 src/slic3r/GUI/Tab.cpp:1421
+#: src/slic3r/GUI/Tab.cpp:1422
+msgid "Filament"
+msgstr "Filament"
+
+#: src/slic3r/GUI/Plater.cpp:675 src/slic3r/GUI/Preset.cpp:1252
+msgid "SLA print"
+msgstr "SLA print"
+
+#: src/slic3r/GUI/Plater.cpp:676 src/slic3r/GUI/Preset.cpp:1253
+msgid "SLA material"
+msgstr "SLA material"
+
+#: src/slic3r/GUI/Plater.cpp:677
+msgid "Printer"
+msgstr "Printer"
+
+#: src/slic3r/GUI/Plater.cpp:707 src/slic3r/GUI/Plater.cpp:3674
+msgid "Send to printer"
+msgstr "Send to printer"
+
+#: src/slic3r/GUI/Plater.cpp:727 src/slic3r/GUI/Plater.cpp:2352
+#: src/slic3r/GUI/Plater.cpp:3470
+msgid "Slice now"
+msgstr "Slice now"
+
+#: src/slic3r/GUI/Plater.cpp:860
+msgid "Hold Shift to Slice & Export G-code"
+msgstr "Hold Shift to Slice & Export G-code"
+
+#: src/slic3r/GUI/Plater.cpp:931
+#, c-format
+msgid "%d (%d shells)"
+msgstr "%d (%d shells)"
+
+#: src/slic3r/GUI/Plater.cpp:936
+#, c-format
+msgid "Auto-repaired (%d errors)"
+msgstr "Auto-repaired (%d errors)"
+
+#: src/slic3r/GUI/Plater.cpp:939
+#, c-format
+msgid ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+msgstr ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+
+#: src/slic3r/GUI/Plater.cpp:949
+msgid "Yes"
+msgstr "Yes"
+
+#: src/slic3r/GUI/Plater.cpp:972
+msgid "Used Material (ml)"
+msgstr "Used Material (ml)"
+
+#: src/slic3r/GUI/Plater.cpp:975
+msgid "object(s)"
+msgstr "object(s)"
+
+#: src/slic3r/GUI/Plater.cpp:975
+msgid "supports and pad"
+msgstr "supports and pad"
+
+#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015
+msgid "objects"
+msgstr "objects"
+
+#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015
+msgid "wipe tower"
+msgstr "wipe tower"
+
+#: src/slic3r/GUI/Plater.cpp:1030
+msgid "normal mode"
+msgstr "normal mode"
+
+#: src/slic3r/GUI/Plater.cpp:1034
+msgid "silent mode"
+msgstr "silent mode"
+
+#: src/slic3r/GUI/Plater.cpp:1544
+msgid "Loading"
+msgstr "Loading"
+
+#: src/slic3r/GUI/Plater.cpp:1554
+#, c-format
+msgid "Processing input file %s\n"
+msgstr "Processing input file %s\n"
+
+#: src/slic3r/GUI/Plater.cpp:1612
+msgid ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+msgstr ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+
+#: src/slic3r/GUI/Plater.cpp:1615 src/slic3r/GUI/Plater.cpp:1707
+msgid "Multi-part object detected"
+msgstr "Multi-part object detected"
+
+#: src/slic3r/GUI/Plater.cpp:1650
+msgid ""
+"This file cannot be loaded in simple mode. Do you want to switch to expert "
+"mode?\n"
+msgstr ""
+"This file cannot be loaded in simple mode. Do you want to switch to expert "
+"mode?\n"
+
+#: src/slic3r/GUI/Plater.cpp:1651
+msgid "Detected advanced data"
+msgstr "Detected advanced data"
+
+#: src/slic3r/GUI/Plater.cpp:1684
+#, c-format
+msgid ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+msgstr ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+
+#: src/slic3r/GUI/Plater.cpp:1704
+msgid ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+msgstr ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+
+#: src/slic3r/GUI/Plater.cpp:1720
+msgid "Loaded"
+msgstr "Loaded"
+
+#: src/slic3r/GUI/Plater.cpp:1812
+msgid ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+msgstr ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+
+#: src/slic3r/GUI/Plater.cpp:1813
+msgid "Object too large?"
+msgstr "Object too large?"
+
+#: src/slic3r/GUI/Plater.cpp:1863
+msgid "Export STL file:"
+msgstr "Export STL file:"
+
+#: src/slic3r/GUI/Plater.cpp:1870
+msgid "Export AMF file:"
+msgstr "Export AMF file:"
+
+#: src/slic3r/GUI/Plater.cpp:1876
+msgid "Save file as:"
+msgstr "Save file as:"
+
+#: src/slic3r/GUI/Plater.cpp:2042
+msgid "Arranging canceled"
+msgstr "Arranging canceled"
+
+#: src/slic3r/GUI/Plater.cpp:2045
+msgid "Arranging"
+msgstr "Arranging"
+
+#: src/slic3r/GUI/Plater.cpp:2079
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr "Could not arrange model objects! Some geometries may be invalid."
+
+#: src/slic3r/GUI/Plater.cpp:2083
+msgid "Arranging done."
+msgstr "Arranging done."
+
+#: src/slic3r/GUI/Plater.cpp:2124
+msgid "Orientation search canceled"
+msgstr "Orientation search canceled"
+
+#: src/slic3r/GUI/Plater.cpp:2129
+msgid "Searching for optimal orientation"
+msgstr "Searching for optimal orientation"
+
+#: src/slic3r/GUI/Plater.cpp:2190
+msgid "Orientation found."
+msgstr "Orientation found."
+
+#: src/slic3r/GUI/Plater.cpp:2211
+msgid ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+msgstr ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+
+#: src/slic3r/GUI/Plater.cpp:2337
+msgid "Invalid data"
+msgstr "Invalid data"
+
+#: src/slic3r/GUI/Plater.cpp:2346
+msgid "Ready to slice"
+msgstr "Ready to slice"
+
+#: src/slic3r/GUI/Plater.cpp:2379 src/slic3r/GUI/PrintHostDialogs.cpp:220
+msgid "Cancelling"
+msgstr "Cancelling"
+
+#: src/slic3r/GUI/Plater.cpp:2396
+msgid "Another export job is currently running."
+msgstr "Another export job is currently running."
+
+#: src/slic3r/GUI/Plater.cpp:2656
+msgid "Export failed"
+msgstr "Export failed"
+
+#: src/slic3r/GUI/Plater.cpp:2661 src/slic3r/GUI/PrintHostDialogs.cpp:221
+msgid "Cancelled"
+msgstr "Cancelled"
+
+#: src/slic3r/GUI/Plater.cpp:2747 src/slic3r/GUI/Plater.cpp:2759
+#: src/slic3r/GUI/Plater.cpp:2831
+msgid "Increase copies"
+msgstr "Increase copies"
+
+#: src/slic3r/GUI/Plater.cpp:2825 src/slic3r/GUI/Plater.cpp:2843
+msgid "Remove the selected object"
+msgstr "Remove the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2831
+msgid "Place one more copy of the selected object"
+msgstr "Place one more copy of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2833
+msgid "Decrease copies"
+msgstr "Decrease copies"
+
+#: src/slic3r/GUI/Plater.cpp:2833
+msgid "Remove one copy of the selected object"
+msgstr "Remove one copy of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2835
+msgid "Set number of copies"
+msgstr "Set number of copies"
+
+#: src/slic3r/GUI/Plater.cpp:2835
+msgid "Change the number of copies of the selected object"
+msgstr "Change the number of copies of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2858
+msgid "Reload from Disk"
+msgstr "Reload from Disk"
+
+#: src/slic3r/GUI/Plater.cpp:2858
+msgid "Reload the selected file from Disk"
+msgstr "Reload the selected file from Disk"
+
+#: src/slic3r/GUI/Plater.cpp:2861
+msgid "Export the selected object as STL file"
+msgstr "Export the selected object as STL file"
+
+#: src/slic3r/GUI/Plater.cpp:2873
+msgid "Along X axis"
+msgstr "Along X axis"
+
+#: src/slic3r/GUI/Plater.cpp:2873
+msgid "Mirror the selected object along the X axis"
+msgstr "Mirror the selected object along the X axis"
+
+#: src/slic3r/GUI/Plater.cpp:2875
+msgid "Along Y axis"
+msgstr "Along Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:2875
+msgid "Mirror the selected object along the Y axis"
+msgstr "Mirror the selected object along the Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:2877
+msgid "Along Z axis"
+msgstr "Along Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:2877
+msgid "Mirror the selected object along the Z axis"
+msgstr "Mirror the selected object along the Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:2880
+msgid "Mirror"
+msgstr "Mirror"
+
+#: src/slic3r/GUI/Plater.cpp:2880
+msgid "Mirror the selected object"
+msgstr "Mirror the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2898
+msgid "To objects"
+msgstr "To objects"
+
+#: src/slic3r/GUI/Plater.cpp:2898 src/slic3r/GUI/Plater.cpp:2920
+msgid "Split the selected object into individual objects"
+msgstr "Split the selected object into individual objects"
+
+#: src/slic3r/GUI/Plater.cpp:2900
+msgid "To parts"
+msgstr "To parts"
+
+#: src/slic3r/GUI/Plater.cpp:2900 src/slic3r/GUI/Plater.cpp:2940
+msgid "Split the selected object into individual sub-parts"
+msgstr "Split the selected object into individual sub-parts"
+
+#: src/slic3r/GUI/Plater.cpp:2903 src/slic3r/GUI/Plater.cpp:2920
+#: src/slic3r/GUI/Plater.cpp:2940 src/libslic3r/PrintConfig.cpp:3075
+msgid "Split"
+msgstr "Split"
+
+#: src/slic3r/GUI/Plater.cpp:2903
+msgid "Split the selected object"
+msgstr "Split the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2926
+msgid "Optimize orientation"
+msgstr "Optimize orientation"
+
+#: src/slic3r/GUI/Plater.cpp:2926
+msgid "Optimize the rotation of the object for better print results."
+msgstr "Optimize the rotation of the object for better print results."
+
+#: src/slic3r/GUI/Plater.cpp:3342
+msgid "Save G-code file as:"
+msgstr "Save G-code file as:"
+
+#: src/slic3r/GUI/Plater.cpp:3342
+msgid "Save SL1 file as:"
+msgstr "Save SL1 file as:"
+
+#: src/slic3r/GUI/Plater.cpp:3397
+#, c-format
+msgid "STL file exported to %s"
+msgstr "STL file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:3413
+#, c-format
+msgid "AMF file exported to %s"
+msgstr "AMF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:3416
+#, c-format
+msgid "Error exporting AMF file %s"
+msgstr "Error exporting AMF file %s"
+
+#: src/slic3r/GUI/Plater.cpp:3442
+#, c-format
+msgid "3MF file exported to %s"
+msgstr "3MF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:3445
+#, c-format
+msgid "Error exporting 3MF file %s"
+msgstr "Error exporting 3MF file %s"
+
+#: src/slic3r/GUI/Plater.cpp:3673
+msgid "Export"
+msgstr "Export"
+
+#: src/slic3r/GUI/Plater.cpp:3674
+msgid "Send G-code"
+msgstr "Send G-code"
+
+#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1762
+#: src/slic3r/GUI/Tab.cpp:1963
+msgid "General"
+msgstr "General"
+
+#: src/slic3r/GUI/Preferences.cpp:34
+msgid "Remember output directory"
+msgstr "Remember output directory"
+
+#: src/slic3r/GUI/Preferences.cpp:36
+msgid ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+msgstr ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+
+#: src/slic3r/GUI/Preferences.cpp:42
+msgid "Auto-center parts"
+msgstr "Auto-center parts"
+
+#: src/slic3r/GUI/Preferences.cpp:44
+msgid ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+msgstr ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+
+#: src/slic3r/GUI/Preferences.cpp:50
+msgid "Background processing"
+msgstr "Background processing"
+
+#: src/slic3r/GUI/Preferences.cpp:52
+msgid ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+msgstr ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+
+#: src/slic3r/GUI/Preferences.cpp:74
+msgid "Suppress \" - default - \" presets"
+msgstr "Suppress \" - default - \" presets"
+
+#: src/slic3r/GUI/Preferences.cpp:76
+msgid ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+msgstr ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+
+#: src/slic3r/GUI/Preferences.cpp:82
+msgid "Show incompatible print and filament presets"
+msgstr "Show incompatible print and filament presets"
+
+#: src/slic3r/GUI/Preferences.cpp:84
+msgid ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+msgstr ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+
+#: src/slic3r/GUI/Preferences.cpp:91
+msgid "Use legacy OpenGL 1.1 rendering"
+msgstr "Use legacy OpenGL 1.1 rendering"
+
+#: src/slic3r/GUI/Preferences.cpp:93
+msgid ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+msgstr ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+
+#: src/slic3r/GUI/Preferences.cpp:101
+msgid "Use Retina resolution for the 3D scene"
+msgstr "Use Retina resolution for the 3D scene"
+
+#: src/slic3r/GUI/Preferences.cpp:103
+msgid ""
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
+msgstr ""
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
+
+#: src/slic3r/GUI/Preferences.cpp:126
+msgid "You need to restart Slic3r to make the changes effective."
+msgstr "You need to restart Slic3r to make the changes effective."
+
+#: src/slic3r/GUI/Preset.cpp:207
+msgid "modified"
+msgstr "modified"
+
+#: src/slic3r/GUI/Preset.cpp:918 src/slic3r/GUI/Preset.cpp:958
+#: src/slic3r/GUI/Preset.cpp:1011 src/slic3r/GUI/Preset.cpp:1043
+#: src/slic3r/GUI/PresetBundle.cpp:1484 src/slic3r/GUI/PresetBundle.cpp:1537
+msgid "System presets"
+msgstr "System presets"
+
+#: src/slic3r/GUI/Preset.cpp:962 src/slic3r/GUI/Preset.cpp:1047
+#: src/slic3r/GUI/PresetBundle.cpp:1542
+msgid "User presets"
+msgstr "User presets"
+
+#: src/slic3r/GUI/Preset.cpp:991 src/slic3r/GUI/Tab.cpp:247
+msgid "Add a new printer"
+msgstr "Add a new printer"
+
+#: src/slic3r/GUI/Preset.cpp:1251
+msgid "filament"
+msgstr "filament"
+
+#: src/slic3r/GUI/PresetHints.cpp:28
+#, c-format
+msgid ""
+"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
+"will be reduced so that no less than %ds are spent on that layer (however, "
+"speed will never be reduced below %dmm/s)."
+msgstr ""
+"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
+"will be reduced so that no less than %ds are spent on that layer (however, "
+"speed will never be reduced below %dmm/s)."
+
+#: src/slic3r/GUI/PresetHints.cpp:32
+#, c-format
+msgid ""
+"\n"
+"If estimated layer time is greater, but still below ~%ds, fan will run at a "
+"proportionally decreasing speed between %d%% and %d%%."
+msgstr ""
+"\n"
+"If estimated layer time is greater, but still below ~%ds, fan will run at a "
+"proportionally decreasing speed between %d%% and %d%%."
+
+#: src/slic3r/GUI/PresetHints.cpp:36
+msgid ""
+"\n"
+"During the other layers, fan "
+msgstr ""
+"\n"
+"During the other layers, fan "
+
+#: src/slic3r/GUI/PresetHints.cpp:38
+msgid "Fan "
+msgstr "Fan "
+
+#: src/slic3r/GUI/PresetHints.cpp:43
+#, c-format
+msgid "will always run at %d%% "
+msgstr "will always run at %d%% "
+
+#: src/slic3r/GUI/PresetHints.cpp:46
+#, c-format
+msgid "except for the first %d layers"
+msgstr "except for the first %d layers"
+
+#: src/slic3r/GUI/PresetHints.cpp:50
+msgid "except for the first layer"
+msgstr "except for the first layer"
+
+#: src/slic3r/GUI/PresetHints.cpp:52
+msgid "will be turned off."
+msgstr "will be turned off."
+
+#: src/slic3r/GUI/PresetHints.cpp:153
+msgid "external perimeters"
+msgstr "external perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:162
+msgid "perimeters"
+msgstr "perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:171
+msgid "infill"
+msgstr "infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:181
+msgid "solid infill"
+msgstr "solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:189
+msgid "top solid infill"
+msgstr "top solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:200
+msgid "support"
+msgstr "support"
+
+#: src/slic3r/GUI/PresetHints.cpp:210
+msgid "support interface"
+msgstr "support interface"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "First layer volumetric"
+msgstr "First layer volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Bridging volumetric"
+msgstr "Bridging volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Volumetric"
+msgstr "Volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:217
+msgid " flow rate is maximized "
+msgstr " flow rate is maximized "
+
+#: src/slic3r/GUI/PresetHints.cpp:220
+msgid "by the print profile maximum"
+msgstr "by the print profile maximum"
+
+#: src/slic3r/GUI/PresetHints.cpp:221
+msgid "when printing "
+msgstr "when printing "
+
+#: src/slic3r/GUI/PresetHints.cpp:222
+msgid " with a volumetric rate "
+msgstr " with a volumetric rate "
+
+#: src/slic3r/GUI/PresetHints.cpp:226
+#, c-format
+msgid "%3.2f mm³/s"
+msgstr "%3.2f mm³/s"
+
+#: src/slic3r/GUI/PresetHints.cpp:228
+#, c-format
+msgid " at filament speed %3.2f mm/s."
+msgstr " at filament speed %3.2f mm/s."
+
+#: src/slic3r/GUI/PresetHints.cpp:247
+msgid ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+msgstr ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+
+#: src/slic3r/GUI/PresetHints.cpp:264
+#, c-format
+msgid "Recommended object thin wall thickness for layer height %.2f and "
+msgstr "Recommended object thin wall thickness for layer height %.2f and "
+
+#: src/slic3r/GUI/PresetHints.cpp:271
+#, c-format
+msgid "%d lines: %.2lf mm"
+msgstr "%d lines: %.2lf mm"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:32
+msgid "Send G-Code to printer host"
+msgstr "Send G-Code to printer host"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:32
+msgid "Upload to Printer Host with the following filename:"
+msgstr "Upload to Printer Host with the following filename:"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
+msgid "Start printing after upload"
+msgstr "Start printing after upload"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:41
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr "Use forward slashes ( / ) as a directory separator if needed."
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:157
+msgid "Cancel selected"
+msgstr "Cancel selected"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:159
+msgid "Show error message"
+msgstr "Show error message"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:198
+#: src/slic3r/GUI/PrintHostDialogs.cpp:217
+msgid "Enqueued"
+msgstr "Enqueued"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:218
+msgid "Uploading"
+msgstr "Uploading"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:222
+msgid "Completed"
+msgstr "Completed"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:260
+msgid "Error uploading to print host:"
+msgstr "Error uploading to print host:"
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+msgstr "NO RAMMING AT ALL"
+
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr "Time"
+
+#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
+#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:611
+#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:670
+#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2250
+#: src/libslic3r/PrintConfig.cpp:2308 src/libslic3r/PrintConfig.cpp:2315
+msgid "s"
+msgstr "s"
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+msgstr "Volumetric speed"
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:44
+msgid "Slic3r Prusa Edition - System Information"
+msgstr "Slic3r Prusa Edition - System Information"
+
+#: src/slic3r/GUI/Tab.cpp:50 src/libslic3r/PrintConfig.cpp:228
+msgid "Compatible printers"
+msgstr "Compatible printers"
+
+#: src/slic3r/GUI/Tab.cpp:51
+msgid "Select the printers this profile is compatible with."
+msgstr "Select the printers this profile is compatible with."
+
+#: src/slic3r/GUI/Tab.cpp:56 src/libslic3r/PrintConfig.cpp:243
+msgid "Compatible print profiles"
+msgstr "Compatible print profiles"
+
+#: src/slic3r/GUI/Tab.cpp:57
+msgid "Select the print profiles this profile is compatible with."
+msgstr "Select the print profiles this profile is compatible with."
+
+#: src/slic3r/GUI/Tab.cpp:132
+msgid "Save current "
+msgstr "Save current "
+
+#: src/slic3r/GUI/Tab.cpp:133
+msgid "Delete this preset"
+msgstr "Delete this preset"
+
+#: src/slic3r/GUI/Tab.cpp:145
+msgid ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+msgstr ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+
+#: src/slic3r/GUI/Tab.cpp:858
+msgid "It's a default preset."
+msgstr "It's a default preset."
+
+#: src/slic3r/GUI/Tab.cpp:859
+msgid "It's a system preset."
+msgstr "It's a system preset."
+
+#: src/slic3r/GUI/Tab.cpp:860
+msgid "Current preset is inherited from "
+msgstr "Current preset is inherited from "
+
+#: src/slic3r/GUI/Tab.cpp:865
+msgid "It can't be deleted or modified. "
+msgstr "It can't be deleted or modified. "
+
+#: src/slic3r/GUI/Tab.cpp:866
+msgid ""
+"Any modifications should be saved as a new preset inherited from this one. "
+msgstr ""
+"Any modifications should be saved as a new preset inherited from this one. "
+
+#: src/slic3r/GUI/Tab.cpp:867
+msgid "To do that please specify a new name for the preset."
+msgstr "To do that please specify a new name for the preset."
+
+#: src/slic3r/GUI/Tab.cpp:871
+msgid "Additional information:"
+msgstr "Additional information:"
+
+#: src/slic3r/GUI/Tab.cpp:877
+msgid "printer model"
+msgstr "printer model"
+
+#: src/slic3r/GUI/Tab.cpp:885
+msgid "default print profile"
+msgstr "default print profile"
+
+#: src/slic3r/GUI/Tab.cpp:888
+msgid "default filament profile"
+msgstr "default filament profile"
+
+#: src/slic3r/GUI/Tab.cpp:902
+msgid "default SLA material profile"
+msgstr "default SLA material profile"
+
+#: src/slic3r/GUI/Tab.cpp:906
+msgid "default SLA print profile"
+msgstr "default SLA print profile"
+
+#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:3303
+msgid "Layers and perimeters"
+msgstr "Layers and perimeters"
+
+#: src/slic3r/GUI/Tab.cpp:949 src/libslic3r/PrintConfig.cpp:55
+msgid "Layer height"
+msgstr "Layer height"
+
+#: src/slic3r/GUI/Tab.cpp:953
+msgid "Vertical shells"
+msgstr "Vertical shells"
+
+#: src/slic3r/GUI/Tab.cpp:964
+msgid "Horizontal shells"
+msgstr "Horizontal shells"
+
+#: src/slic3r/GUI/Tab.cpp:965 src/libslic3r/PrintConfig.cpp:1709
+msgid "Solid layers"
+msgstr "Solid layers"
+
+#: src/slic3r/GUI/Tab.cpp:970
+msgid "Quality (slower slicing)"
+msgstr "Quality (slower slicing)"
+
+#: src/slic3r/GUI/Tab.cpp:988
+msgid "Reducing printing time"
+msgstr "Reducing printing time"
+
+#: src/slic3r/GUI/Tab.cpp:1000
+msgid "Skirt and brim"
+msgstr "Skirt and brim"
+
+#: src/slic3r/GUI/Tab.cpp:1017
+msgid "Raft"
+msgstr "Raft"
+
+#: src/slic3r/GUI/Tab.cpp:1021
+msgid "Options for support material and raft"
+msgstr "Options for support material and raft"
+
+#: src/slic3r/GUI/Tab.cpp:1036
+msgid "Speed for print moves"
+msgstr "Speed for print moves"
+
+#: src/slic3r/GUI/Tab.cpp:1048
+msgid "Speed for non-print moves"
+msgstr "Speed for non-print moves"
+
+#: src/slic3r/GUI/Tab.cpp:1051
+msgid "Modifiers"
+msgstr "Modifiers"
+
+#: src/slic3r/GUI/Tab.cpp:1054
+msgid "Acceleration control (advanced)"
+msgstr "Acceleration control (advanced)"
+
+#: src/slic3r/GUI/Tab.cpp:1061
+msgid "Autospeed (advanced)"
+msgstr "Autospeed (advanced)"
+
+#: src/slic3r/GUI/Tab.cpp:1069
+msgid "Multiple Extruders"
+msgstr "Multiple Extruders"
+
+#: src/slic3r/GUI/Tab.cpp:1077
+msgid "Ooze prevention"
+msgstr "Ooze prevention"
+
+#: src/slic3r/GUI/Tab.cpp:1094
+msgid "Extrusion width"
+msgstr "Extrusion width"
+
+#: src/slic3r/GUI/Tab.cpp:1104
+msgid "Overlap"
+msgstr "Overlap"
+
+#: src/slic3r/GUI/Tab.cpp:1107
+msgid "Flow"
+msgstr "Flow"
+
+#: src/slic3r/GUI/Tab.cpp:1116
+msgid "Other"
+msgstr "Other"
+
+#: src/slic3r/GUI/Tab.cpp:1119 src/slic3r/GUI/Tab.cpp:3351
+msgid "Output options"
+msgstr "Output options"
+
+#: src/slic3r/GUI/Tab.cpp:1120
+msgid "Sequential printing"
+msgstr "Sequential printing"
+
+#: src/slic3r/GUI/Tab.cpp:1122
+msgid "Extruder clearance (mm)"
+msgstr "Extruder clearance (mm)"
+
+#: src/slic3r/GUI/Tab.cpp:1131 src/slic3r/GUI/Tab.cpp:3352
+msgid "Output file"
+msgstr "Output file"
+
+#: src/slic3r/GUI/Tab.cpp:1138 src/libslic3r/PrintConfig.cpp:1382
+msgid "Post-processing scripts"
+msgstr "Post-processing scripts"
+
+#: src/slic3r/GUI/Tab.cpp:1144 src/slic3r/GUI/Tab.cpp:1145
+#: src/slic3r/GUI/Tab.cpp:1527 src/slic3r/GUI/Tab.cpp:1528
+#: src/slic3r/GUI/Tab.cpp:1935 src/slic3r/GUI/Tab.cpp:1936
+#: src/slic3r/GUI/Tab.cpp:2027 src/slic3r/GUI/Tab.cpp:2028
+#: src/slic3r/GUI/Tab.cpp:3240 src/slic3r/GUI/Tab.cpp:3241
+msgid "Notes"
+msgstr "Notes"
+
+#: src/slic3r/GUI/Tab.cpp:1151 src/slic3r/GUI/Tab.cpp:1535
+#: src/slic3r/GUI/Tab.cpp:1942 src/slic3r/GUI/Tab.cpp:2034
+#: src/slic3r/GUI/Tab.cpp:3248 src/slic3r/GUI/Tab.cpp:3357
+msgid "Dependencies"
+msgstr "Dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:1152 src/slic3r/GUI/Tab.cpp:1536
+#: src/slic3r/GUI/Tab.cpp:1943 src/slic3r/GUI/Tab.cpp:2035
+#: src/slic3r/GUI/Tab.cpp:3249 src/slic3r/GUI/Tab.cpp:3358
+msgid "Profile dependencies"
+msgstr "Profile dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:1198
+#, no-c-format
+msgid ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+
+#: src/slic3r/GUI/Tab.cpp:1205
+msgid "Spiral Vase"
+msgstr "Spiral Vase"
+
+#: src/slic3r/GUI/Tab.cpp:1228
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+msgstr ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+
+#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:1249
+msgid "Wipe Tower"
+msgstr "Wipe Tower"
+
+#: src/slic3r/GUI/Tab.cpp:1246
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+
+#: src/slic3r/GUI/Tab.cpp:1264
+msgid ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+msgstr ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+
+#: src/slic3r/GUI/Tab.cpp:1267
+msgid "Support Generator"
+msgstr "Support Generator"
+
+#: src/slic3r/GUI/Tab.cpp:1309
+msgid "The "
+msgstr "The "
+
+#: src/slic3r/GUI/Tab.cpp:1309
+#, no-c-format
+msgid ""
+" infill pattern is not supposed to work at 100% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+msgstr ""
+" infill pattern is not supposed to work at 100% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+
+#: src/slic3r/GUI/Tab.cpp:1429
+msgid "Temperature "
+msgstr "Temperature "
+
+#: src/slic3r/GUI/Tab.cpp:1435
+msgid "Bed"
+msgstr "Bed"
+
+#: src/slic3r/GUI/Tab.cpp:1440
+msgid "Cooling"
+msgstr "Cooling"
+
+#: src/slic3r/GUI/Tab.cpp:1441 src/libslic3r/PrintConfig.cpp:1285
+#: src/libslic3r/PrintConfig.cpp:2097
+msgid "Enable"
+msgstr "Enable"
+
+#: src/slic3r/GUI/Tab.cpp:1452
+msgid "Fan settings"
+msgstr "Fan settings"
+
+#: src/slic3r/GUI/Tab.cpp:1453
+msgid "Fan speed"
+msgstr "Fan speed"
+
+#: src/slic3r/GUI/Tab.cpp:1461
+msgid "Cooling thresholds"
+msgstr "Cooling thresholds"
+
+#: src/slic3r/GUI/Tab.cpp:1467
+msgid "Filament properties"
+msgstr "Filament properties"
+
+#: src/slic3r/GUI/Tab.cpp:1471
+msgid "Print speed override"
+msgstr "Print speed override"
+
+#: src/slic3r/GUI/Tab.cpp:1481
+msgid "Toolchange parameters with single extruder MM printers"
+msgstr "Toolchange parameters with single extruder MM printers"
+
+#: src/slic3r/GUI/Tab.cpp:1496
+msgid "Ramming settings"
+msgstr "Ramming settings"
+
+#: src/slic3r/GUI/Tab.cpp:1514 src/slic3r/GUI/Tab.cpp:1898
+msgid "Custom G-code"
+msgstr "Custom G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1515 src/slic3r/GUI/Tab.cpp:1899
+#: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:1750
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1521 src/slic3r/GUI/Tab.cpp:1905
+#: src/libslic3r/PrintConfig.cpp:358 src/libslic3r/PrintConfig.cpp:368
+msgid "End G-code"
+msgstr "End G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1632 src/slic3r/GUI/Tab.cpp:1689
+msgid " Browse "
+msgstr " Browse "
+
+#: src/slic3r/GUI/Tab.cpp:1651 src/slic3r/GUI/Tab.cpp:1838
+msgid "Test"
+msgstr "Test"
+
+#: src/slic3r/GUI/Tab.cpp:1662
+msgid "Could not get a valid Printer Host reference"
+msgstr "Could not get a valid Printer Host reference"
+
+#: src/slic3r/GUI/Tab.cpp:1668 src/slic3r/GUI/Tab.cpp:1851
+msgid "Success!"
+msgstr "Success!"
+
+#: src/slic3r/GUI/Tab.cpp:1683
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+
+#: src/slic3r/GUI/Tab.cpp:1696
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+
+#: src/slic3r/GUI/Tab.cpp:1697
+msgid "Open CA certificate file"
+msgstr "Open CA certificate file"
+
+#: src/slic3r/GUI/Tab.cpp:1725
+msgid ""
+"HTTPS CA File:\n"
+"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"\tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+msgstr ""
+"HTTPS CA File:\n"
+"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"\tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+
+#: src/slic3r/GUI/Tab.cpp:1763 src/slic3r/GUI/Tab.cpp:1964
+msgid "Size and coordinates"
+msgstr "Size and coordinates"
+
+#: src/slic3r/GUI/Tab.cpp:1767 src/slic3r/GUI/Tab.cpp:1968
+#: src/slic3r/GUI/Tab.cpp:2911
+msgid " Set "
+msgstr " Set "
+
+#: src/slic3r/GUI/Tab.cpp:1790
+msgid "Capabilities"
+msgstr "Capabilities"
+
+#: src/slic3r/GUI/Tab.cpp:1795
+msgid "Number of extruders of the printer."
+msgstr "Number of extruders of the printer."
+
+#: src/slic3r/GUI/Tab.cpp:1823
+msgid "USB/Serial connection"
+msgstr "USB/Serial connection"
+
+#: src/slic3r/GUI/Tab.cpp:1824 src/libslic3r/PrintConfig.cpp:1590
+msgid "Serial port"
+msgstr "Serial port"
+
+#: src/slic3r/GUI/Tab.cpp:1829
+msgid "Rescan serial ports"
+msgstr "Rescan serial ports"
+
+#: src/slic3r/GUI/Tab.cpp:1851
+msgid "Connection to printer works correctly."
+msgstr "Connection to printer works correctly."
+
+#: src/slic3r/GUI/Tab.cpp:1854
+msgid "Connection failed."
+msgstr "Connection failed."
+
+#: src/slic3r/GUI/Tab.cpp:1867 src/slic3r/GUI/Tab.cpp:2022
+msgid "Print Host upload"
+msgstr "Print Host upload"
+
+#: src/slic3r/GUI/Tab.cpp:1911 src/libslic3r/PrintConfig.cpp:128
+msgid "Before layer change G-code"
+msgstr "Before layer change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1917 src/libslic3r/PrintConfig.cpp:1030
+msgid "After layer change G-code"
+msgstr "After layer change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1923 src/libslic3r/PrintConfig.cpp:2005
+msgid "Tool change G-code"
+msgstr "Tool change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1929
+msgid "Between objects G-code (for sequential printing)"
+msgstr "Between objects G-code (for sequential printing)"
+
+#: src/slic3r/GUI/Tab.cpp:1990
+msgid "Display"
+msgstr "Display"
+
+#: src/slic3r/GUI/Tab.cpp:2001
+msgid "Tilt"
+msgstr "Tilt"
+
+#: src/slic3r/GUI/Tab.cpp:2002
+msgid "Tilt time"
+msgstr "Tilt time"
+
+#: src/slic3r/GUI/Tab.cpp:2008 src/slic3r/GUI/Tab.cpp:3223
+msgid "Corrections"
+msgstr "Corrections"
+
+#: src/slic3r/GUI/Tab.cpp:2074 src/slic3r/GUI/Tab.cpp:2136
+#: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1086
+#: src/libslic3r/PrintConfig.cpp:1096 src/libslic3r/PrintConfig.cpp:1109
+#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1131
+#: src/libslic3r/PrintConfig.cpp:1142
+msgid "Machine limits"
+msgstr "Machine limits"
+
+#: src/slic3r/GUI/Tab.cpp:2088
+msgid "Values in this column are for Full Power mode"
+msgstr "Values in this column are for Full Power mode"
+
+#: src/slic3r/GUI/Tab.cpp:2089
+msgid "Full Power"
+msgstr "Full Power"
+
+#: src/slic3r/GUI/Tab.cpp:2094
+msgid "Values in this column are for Silent mode"
+msgstr "Values in this column are for Silent mode"
+
+#: src/slic3r/GUI/Tab.cpp:2095
+msgid "Silent"
+msgstr "Silent"
+
+#: src/slic3r/GUI/Tab.cpp:2103
+msgid "Maximum feedrates"
+msgstr "Maximum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2108
+msgid "Maximum accelerations"
+msgstr "Maximum accelerations"
+
+#: src/slic3r/GUI/Tab.cpp:2115
+msgid "Jerk limits"
+msgstr "Jerk limits"
+
+#: src/slic3r/GUI/Tab.cpp:2120
+msgid "Minimum feedrates"
+msgstr "Minimum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2158 src/slic3r/GUI/Tab.cpp:2166
+msgid "Single extruder MM setup"
+msgstr "Single extruder MM setup"
+
+#: src/slic3r/GUI/Tab.cpp:2167
+msgid "Single extruder multimaterial parameters"
+msgstr "Single extruder multimaterial parameters"
+
+#: src/slic3r/GUI/Tab.cpp:2181 src/libslic3r/GCode/PreviewData.cpp:475
+#, c-format
+msgid "Extruder %d"
+msgstr "Extruder %d"
+
+#: src/slic3r/GUI/Tab.cpp:2188
+msgid "Layer height limits"
+msgstr "Layer height limits"
+
+#: src/slic3r/GUI/Tab.cpp:2193
+msgid "Position (for multi-extruder printers)"
+msgstr "Position (for multi-extruder printers)"
+
+#: src/slic3r/GUI/Tab.cpp:2196
+msgid "Retraction"
+msgstr "Retraction"
+
+#: src/slic3r/GUI/Tab.cpp:2199
+msgid "Only lift Z"
+msgstr "Only lift Z"
+
+#: src/slic3r/GUI/Tab.cpp:2212
+msgid ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+msgstr ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+
+#: src/slic3r/GUI/Tab.cpp:2216
+msgid "Preview"
+msgstr "Preview"
+
+#: src/slic3r/GUI/Tab.cpp:2352
+msgid ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+msgstr ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+
+#: src/slic3r/GUI/Tab.cpp:2354
+msgid "Firmware Retraction"
+msgstr "Firmware Retraction"
+
+#: src/slic3r/GUI/Tab.cpp:2681
+#, c-format
+msgid "Default preset (%s)"
+msgstr "Default preset (%s)"
+
+#: src/slic3r/GUI/Tab.cpp:2682
+#, c-format
+msgid "Preset (%s)"
+msgstr "Preset (%s)"
+
+#: src/slic3r/GUI/Tab.cpp:2699
+msgid "has the following unsaved changes:"
+msgstr "has the following unsaved changes:"
+
+#: src/slic3r/GUI/Tab.cpp:2702
+msgid "is not compatible with printer"
+msgstr "is not compatible with printer"
+
+#: src/slic3r/GUI/Tab.cpp:2703
+msgid "is not compatible with print profile"
+msgstr "is not compatible with print profile"
+
+#: src/slic3r/GUI/Tab.cpp:2705
+msgid "and it has the following unsaved changes:"
+msgstr "and it has the following unsaved changes:"
+
+#: src/slic3r/GUI/Tab.cpp:2708
+msgid "Discard changes and continue anyway?"
+msgstr "Discard changes and continue anyway?"
+
+#: src/slic3r/GUI/Tab.cpp:2709
+msgid "Unsaved Changes"
+msgstr "Unsaved Changes"
+
+#: src/slic3r/GUI/Tab.cpp:2721
+msgid "Please check your object list before preset changing."
+msgstr "Please check your object list before preset changing."
+
+#: src/slic3r/GUI/Tab.cpp:2801
+msgid "Copy"
+msgstr "Copy"
+
+#: src/slic3r/GUI/Tab.cpp:2823
+msgid "The supplied name is empty. It can't be saved."
+msgstr "The supplied name is empty. It can't be saved."
+
+#: src/slic3r/GUI/Tab.cpp:2828
+msgid "Cannot overwrite a system profile."
+msgstr "Cannot overwrite a system profile."
+
+#: src/slic3r/GUI/Tab.cpp:2832
+msgid "Cannot overwrite an external profile."
+msgstr "Cannot overwrite an external profile."
+
+#: src/slic3r/GUI/Tab.cpp:2858
+msgid "remove"
+msgstr "remove"
+
+#: src/slic3r/GUI/Tab.cpp:2858
+msgid "delete"
+msgstr "delete"
+
+#: src/slic3r/GUI/Tab.cpp:2859
+msgid "Are you sure you want to "
+msgstr "Are you sure you want to "
+
+#: src/slic3r/GUI/Tab.cpp:2859
+msgid " the selected preset?"
+msgstr " the selected preset?"
+
+#: src/slic3r/GUI/Tab.cpp:2860
+msgid "Remove"
+msgstr "Remove"
+
+#: src/slic3r/GUI/Tab.cpp:2861
+msgid " Preset"
+msgstr " Preset"
+
+#: src/slic3r/GUI/Tab.cpp:2989
+msgid ""
+"LOCKED LOCK;indicates that the settings are the same as the system values "
+"for the current option group"
+msgstr ""
+"LOCKED LOCK;indicates that the settings are the same as the system values "
+"for the current option group"
+
+#: src/slic3r/GUI/Tab.cpp:2992
+msgid ""
+"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
+"the system values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+msgstr ""
+"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
+"the system values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+
+#: src/slic3r/GUI/Tab.cpp:2998
+msgid ""
+"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+msgstr ""
+"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+
+#: src/slic3r/GUI/Tab.cpp:3002
+msgid ""
+"BACK ARROW;indicates that the settings were changed and are not equal to the "
+"last saved preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+msgstr ""
+"BACK ARROW;indicates that the settings were changed and are not equal to the "
+"last saved preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:3028
+msgid ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+msgstr ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+
+#: src/slic3r/GUI/Tab.cpp:3030
+msgid ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+msgstr ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+
+#: src/slic3r/GUI/Tab.cpp:3033
+msgid "WHITE BULLET icon indicates a non system preset."
+msgstr "WHITE BULLET icon indicates a non system preset."
+
+#: src/slic3r/GUI/Tab.cpp:3036
+msgid ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+msgstr ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+
+#: src/slic3r/GUI/Tab.cpp:3038
+msgid ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+msgstr ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+
+#: src/slic3r/GUI/Tab.cpp:3044
+msgid ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+msgstr ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+
+#: src/slic3r/GUI/Tab.cpp:3045
+msgid ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+msgstr ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+
+#: src/slic3r/GUI/Tab.cpp:3051
+msgid ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+msgstr ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+
+#: src/slic3r/GUI/Tab.cpp:3052
+msgid ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+msgstr ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:3152
+msgid " as:"
+msgstr " as:"
+
+#: src/slic3r/GUI/Tab.cpp:3196
+msgid "the following postfix are not allowed:"
+msgstr "the following postfix are not allowed:"
+
+#: src/slic3r/GUI/Tab.cpp:3200
+msgid "The supplied name is not available."
+msgstr "The supplied name is not available."
+
+#: src/slic3r/GUI/Tab.cpp:3213
+msgid "Material"
+msgstr "Material"
+
+#: src/slic3r/GUI/Tab.cpp:3215 src/slic3r/GUI/Tab.cpp:3305
+msgid "Layers"
+msgstr "Layers"
+
+#: src/slic3r/GUI/Tab.cpp:3219
+msgid "Exposure"
+msgstr "Exposure"
+
+#: src/slic3r/GUI/Tab.cpp:3313
+msgid "Support head"
+msgstr "Support head"
+
+#: src/slic3r/GUI/Tab.cpp:3318
+msgid "Support pillar"
+msgstr "Support pillar"
+
+#: src/slic3r/GUI/Tab.cpp:3328
+msgid "Connection of the support sticks and junctions"
+msgstr "Connection of the support sticks and junctions"
+
+#: src/slic3r/GUI/Tab.cpp:3333
+msgid "Automatic generation"
+msgstr "Automatic generation"
+
+#: src/slic3r/GUI/Tab.cpp:3395
+msgid "Head penetration should not be greater than the head width."
+msgstr "Head penetration should not be greater than the head width."
+
+#: src/slic3r/GUI/Tab.cpp:3396
+msgid "Invalid Head penetration"
+msgstr "Invalid Head penetration"
+
+#: src/slic3r/GUI/Tab.cpp:3408
+msgid "Pinhead diameter should be smaller than the pillar diameter."
+msgstr "Pinhead diameter should be smaller than the pillar diameter."
+
+#: src/slic3r/GUI/Tab.cpp:3409
+msgid "Invalid pinhead diameter"
+msgstr "Invalid pinhead diameter"
+
+#: src/slic3r/GUI/Tab.hpp:307 src/slic3r/GUI/Tab.hpp:395
+msgid "Print Settings"
+msgstr "Print Settings"
+
+#: src/slic3r/GUI/Tab.hpp:325
+msgid "Filament Settings"
+msgstr "Filament Settings"
+
+#: src/slic3r/GUI/Tab.hpp:358
+msgid "Printer Settings"
+msgstr "Printer Settings"
+
+#: src/slic3r/GUI/Tab.hpp:381
+msgid "Material Settings"
+msgstr "Material Settings"
+
+#: src/slic3r/GUI/Tab.hpp:407
+msgid "Save preset"
+msgstr "Save preset"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:29
+msgid "Update available"
+msgstr "Update available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:29
+msgid "New version of Slic3r PE is available"
+msgstr "New version of Slic3r PE is available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:36
+msgid "To download, follow the link below."
+msgstr "To download, follow the link below."
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:44
+msgid "Current version:"
+msgstr "Current version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:46
+msgid "New version:"
+msgstr "New version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:54
+msgid "Don't notify about new releases any more"
+msgstr "Don't notify about new releases any more"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:72 src/slic3r/GUI/UpdateDialogs.cpp:164
+msgid "Configuration update"
+msgstr "Configuration update"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:72
+msgid "Configuration update is available"
+msgstr "Configuration update is available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:75
+msgid ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+msgstr ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:111
+msgid "Slic3r incompatibility"
+msgstr "Slic3r incompatibility"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:111
+msgid "Slic3r configuration is incompatible"
+msgstr "Slic3r configuration is incompatible"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:114
+msgid ""
+"This version of Slic3r PE is not compatible with currently installed "
+"configuration bundles.\n"
+"This probably happened as a result of running an older Slic3r PE after using "
+"a newer one.\n"
+"\n"
+"You may either exit Slic3r and try again with a newer version, or you may re-"
+"run the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this Slic3r.\n"
+msgstr ""
+"This version of Slic3r PE is not compatible with currently installed "
+"configuration bundles.\n"
+"This probably happened as a result of running an older Slic3r PE after using "
+"a newer one.\n"
+"\n"
+"You may either exit Slic3r and try again with a newer version, or you may re-"
+"run the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this Slic3r.\n"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:123
+#, c-format
+msgid "This Slic3r PE version: %s"
+msgstr "This Slic3r PE version: %s"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:128
+msgid "Incompatible bundles:"
+msgstr "Incompatible bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:144
+msgid "Exit Slic3r"
+msgstr "Exit Slic3r"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:147
+msgid "Re-configure"
+msgstr "Re-configure"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:168
+#, c-format
+msgid ""
+"Slic3r PE now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+msgstr ""
+"Slic3r PE now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:184
+msgid "For more information please visit our wiki page:"
+msgstr "For more information please visit our wiki page:"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:14
+msgid "Ramming customization"
+msgstr "Ramming customization"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:40
+msgid ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+msgstr ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:82
+msgid "Total ramming time"
+msgstr "Total ramming time"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:84
+msgid "Total rammed volume"
+msgstr "Total rammed volume"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:88
+msgid "Ramming line width"
+msgstr "Ramming line width"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:90
+msgid "Ramming line spacing"
+msgstr "Ramming line spacing"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:141
+msgid "Wipe tower - Purging volume adjustment"
+msgstr "Wipe tower - Purging volume adjustment"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:225
+msgid ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+msgstr ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:226
+msgid "Extruder changed to"
+msgstr "Extruder changed to"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:234
+msgid "unloaded"
+msgstr "unloaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:235
+msgid "loaded"
+msgstr "loaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:240
+msgid "Tool #"
+msgstr "Tool #"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:247
+msgid ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+msgstr ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:248
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr "Volume to purge (mm³) when the filament is being"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:262
+msgid "From"
+msgstr "From"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:327
+msgid ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+msgstr ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:339
+msgid "Show simplified settings"
+msgstr "Show simplified settings"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:339
+msgid "Show advanced settings"
+msgstr "Show advanced settings"
+
+#: src/slic3r/GUI/wxExtensions.cpp:2398
+#, c-format
+msgid "Switch to the %s mode"
+msgstr "Switch to the %s mode"
+
+#: src/slic3r/GUI/wxExtensions.cpp:2399
+#, c-format
+msgid "Current mode is %s"
+msgstr "Current mode is %s"
+
+#: src/slic3r/Utils/Duet.cpp:51
+msgid "Connection to Duet works correctly."
+msgstr "Connection to Duet works correctly."
+
+#: src/slic3r/Utils/Duet.cpp:56
+msgid "Could not connect to Duet"
+msgstr "Could not connect to Duet"
+
+#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
+msgid "Unknown error occured"
+msgstr "Unknown error occured"
+
+#: src/slic3r/Utils/Duet.cpp:148
+msgid "Wrong password"
+msgstr "Wrong password"
+
+#: src/slic3r/Utils/Duet.cpp:151
+msgid "Could not get resources to create a new connection"
+msgstr "Could not get resources to create a new connection"
+
+#: src/slic3r/Utils/OctoPrint.cpp:69
+#, c-format
+msgid "Mismatched type of print host: %s"
+msgstr "Mismatched type of print host: %s"
+
+#: src/slic3r/Utils/OctoPrint.cpp:84
+msgid "Connection to OctoPrint works correctly."
+msgstr "Connection to OctoPrint works correctly."
+
+#: src/slic3r/Utils/OctoPrint.cpp:90
+msgid "Could not connect to OctoPrint"
+msgstr "Could not connect to OctoPrint"
+
+#: src/slic3r/Utils/OctoPrint.cpp:90
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr "Note: OctoPrint version at least 1.1.0 is required."
+
+#: src/slic3r/Utils/OctoPrint.cpp:195
+msgid "Connection to Prusa SLA works correctly."
+msgstr "Connection to Prusa SLA works correctly."
+
+#: src/slic3r/Utils/OctoPrint.cpp:200
+msgid "Could not connect to Prusa SLA"
+msgstr "Could not connect to Prusa SLA"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:583
+#, c-format
+msgid "requires min. %s and max. %s"
+msgstr "requires min. %s and max. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:588
+#, c-format
+msgid "requires min. %s"
+msgstr "requires min. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:590
+#, c-format
+msgid "requires max. %s"
+msgstr "requires max. %s"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:219
+#: src/slic3r/Utils/FixModelByWin10.cpp:359
+msgid "Exporting source model"
+msgstr "Exporting source model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr "Failed loading the input model."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing model by the Netfabb service"
+msgstr "Repairing model by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+msgstr "Mesh repair failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:251
+#: src/slic3r/Utils/FixModelByWin10.cpp:378
+msgid "Loading repaired model"
+msgstr "Loading repaired model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:263
+#: src/slic3r/Utils/FixModelByWin10.cpp:270
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgid "Saving mesh into the 3MF container failed."
+msgstr "Saving mesh into the 3MF container failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:340
+msgid "Model fixing"
+msgstr "Model fixing"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:341
+msgid "Exporting model..."
+msgstr "Exporting model..."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:368
+msgid "Export of a temporary 3mf file failed"
+msgstr "Export of a temporary 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:383
+msgid "Import of the repaired 3mf file failed"
+msgstr "Import of the repaired 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:385
+msgid "Repaired 3MF file does not contain any object"
+msgstr "Repaired 3MF file does not contain any object"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:387
+msgid "Repaired 3MF file contains more than one object"
+msgstr "Repaired 3MF file contains more than one object"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:389
+msgid "Repaired 3MF file does not contain any volume"
+msgstr "Repaired 3MF file does not contain any volume"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:391
+msgid "Repaired 3MF file contains more than one volume"
+msgstr "Repaired 3MF file contains more than one volume"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:400
+msgid "Model repair finished"
+msgstr "Model repair finished"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:406
+msgid "Model repair canceled"
+msgstr "Model repair canceled"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+msgid "Model repaired successfully"
+msgstr "Model repaired successfully"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model Repair by the Netfabb service"
+msgstr "Model Repair by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model repair failed: \n"
+msgstr "Model repair failed: \n"
+
+#: src/libslic3r/Zipper.cpp:35
+msgid "undefined error"
+msgstr "undefined error"
+
+#: src/libslic3r/Zipper.cpp:37
+msgid "too many files"
+msgstr "too many files"
+
+#: src/libslic3r/Zipper.cpp:39
+msgid "file too large"
+msgstr "file too large"
+
+#: src/libslic3r/Zipper.cpp:41
+msgid "unsupported method"
+msgstr "unsupported method"
+
+#: src/libslic3r/Zipper.cpp:43
+msgid "unsupported encryption"
+msgstr "unsupported encryption"
+
+#: src/libslic3r/Zipper.cpp:45
+msgid "unsupported feature"
+msgstr "unsupported feature"
+
+#: src/libslic3r/Zipper.cpp:47
+msgid "failed finding central directory"
+msgstr "failed finding central directory"
+
+#: src/libslic3r/Zipper.cpp:49
+msgid "not a ZIP archive"
+msgstr "not a ZIP archive"
+
+#: src/libslic3r/Zipper.cpp:51
+msgid "invalid header or archive is corrupted"
+msgstr "invalid header or archive is corrupted"
+
+#: src/libslic3r/Zipper.cpp:53
+msgid "unsupported multidisk archive"
+msgstr "unsupported multidisk archive"
+
+#: src/libslic3r/Zipper.cpp:55
+msgid "decompression failed or archive is corrupted"
+msgstr "decompression failed or archive is corrupted"
+
+#: src/libslic3r/Zipper.cpp:57
+msgid "compression failed"
+msgstr "compression failed"
+
+#: src/libslic3r/Zipper.cpp:59
+msgid "unexpected decompressed size"
+msgstr "unexpected decompressed size"
+
+#: src/libslic3r/Zipper.cpp:61
+msgid "CRC-32 check failed"
+msgstr "CRC-32 check failed"
+
+#: src/libslic3r/Zipper.cpp:63
+msgid "unsupported central directory size"
+msgstr "unsupported central directory size"
+
+#: src/libslic3r/Zipper.cpp:65
+msgid "allocation failed"
+msgstr "allocation failed"
+
+#: src/libslic3r/Zipper.cpp:67
+msgid "file open failed"
+msgstr "file open failed"
+
+#: src/libslic3r/Zipper.cpp:69
+msgid "file create failed"
+msgstr "file create failed"
+
+#: src/libslic3r/Zipper.cpp:71
+msgid "file write failed"
+msgstr "file write failed"
+
+#: src/libslic3r/Zipper.cpp:73
+msgid "file read failed"
+msgstr "file read failed"
+
+#: src/libslic3r/Zipper.cpp:75
+msgid "file close failed"
+msgstr "file close failed"
+
+#: src/libslic3r/Zipper.cpp:77
+msgid "file seek failed"
+msgstr "file seek failed"
+
+#: src/libslic3r/Zipper.cpp:79
+msgid "file stat failed"
+msgstr "file stat failed"
+
+#: src/libslic3r/Zipper.cpp:81
+msgid "invalid parameter"
+msgstr "invalid parameter"
+
+#: src/libslic3r/Zipper.cpp:83
+msgid "invalid filename"
+msgstr "invalid filename"
+
+#: src/libslic3r/Zipper.cpp:85
+msgid "buffer too small"
+msgstr "buffer too small"
+
+#: src/libslic3r/Zipper.cpp:87
+msgid "internal error"
+msgstr "internal error"
+
+#: src/libslic3r/Zipper.cpp:89
+msgid "file not found"
+msgstr "file not found"
+
+#: src/libslic3r/Zipper.cpp:91
+msgid "archive is too large"
+msgstr "archive is too large"
+
+#: src/libslic3r/Zipper.cpp:93
+msgid "validation failed"
+msgstr "validation failed"
+
+#: src/libslic3r/Zipper.cpp:95
+msgid "write calledback failed"
+msgstr "write calledback failed"
+
+#: src/libslic3r/Zipper.cpp:105
+msgid "Error with zip archive"
+msgstr "Error with zip archive"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2153
+msgid "Starting"
+msgstr "Starting"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2154
+msgid "Filtering"
+msgstr "Filtering"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2155
+msgid "Generate pinheads"
+msgstr "Generate pinheads"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2156
+msgid "Classification"
+msgstr "Classification"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2157
+msgid "Routing to ground"
+msgstr "Routing to ground"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2158
+msgid "Routing supports to model surface"
+msgstr "Routing supports to model surface"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2159
+msgid "Cascading pillars"
+msgstr "Cascading pillars"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2160
+msgid "Processing small holes"
+msgstr "Processing small holes"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2161
+msgid "Done"
+msgstr "Done"
+
+#: src/libslic3r/SLA/SLASupportTree.cpp:2162
+msgid "Abort"
+msgstr "Abort"
+
+#: src/libslic3r/Print.cpp:1136
+msgid "All objects are outside of the print volume."
+msgstr "All objects are outside of the print volume."
+
+#: src/libslic3r/Print.cpp:1165
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr "Some objects are too close; your extruder will collide with them."
+
+#: src/libslic3r/Print.cpp:1180
+msgid ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+msgstr ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+
+#: src/libslic3r/Print.cpp:1190
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr "The Spiral Vase option can only be used when printing a single object."
+
+#: src/libslic3r/Print.cpp:1192
+msgid ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+msgstr ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+
+#: src/libslic3r/Print.cpp:1198
+msgid ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+msgstr ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+
+#: src/libslic3r/Print.cpp:1203
+msgid ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+msgstr ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+
+#: src/libslic3r/Print.cpp:1205
+msgid ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+msgstr ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+
+#: src/libslic3r/Print.cpp:1226
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heigths"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heigths"
+
+#: src/libslic3r/Print.cpp:1228
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+
+#: src/libslic3r/Print.cpp:1230
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+
+#: src/libslic3r/Print.cpp:1232
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+
+#: src/libslic3r/Print.cpp:1261
+msgid ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+msgstr ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+
+#: src/libslic3r/Print.cpp:1271
+msgid "The supplied settings will cause an empty print."
+msgstr "The supplied settings will cause an empty print."
+
+#: src/libslic3r/Print.cpp:1288
+msgid ""
+"One or more object were assigned an extruder that the printer does not have."
+msgstr ""
+"One or more object were assigned an extruder that the printer does not have."
+
+#: src/libslic3r/Print.cpp:1297
+msgid ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+msgstr ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+
+#: src/libslic3r/Print.cpp:1305
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+msgstr ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+
+#: src/libslic3r/Print.cpp:1309
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+msgstr ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+
+#: src/libslic3r/Print.cpp:1316
+msgid "first_layer_height"
+msgstr "first_layer_height"
+
+#: src/libslic3r/Print.cpp:1331
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr "First layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/Print.cpp:1335
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr "Layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/SLAPrint.cpp:55
+msgid "Slicing model"
+msgstr "Slicing model"
+
+#: src/libslic3r/SLAPrint.cpp:56 src/libslic3r/SLAPrint.cpp:801
+msgid "Generating support points"
+msgstr "Generating support points"
+
+#: src/libslic3r/SLAPrint.cpp:57
+msgid "Generating support tree"
+msgstr "Generating support tree"
+
+#: src/libslic3r/SLAPrint.cpp:58
+msgid "Generating pad"
+msgstr "Generating pad"
+
+#: src/libslic3r/SLAPrint.cpp:59
+msgid "Slicing supports"
+msgstr "Slicing supports"
+
+#: src/libslic3r/SLAPrint.cpp:71
+msgid "Merging slices and calculating statistics"
+msgstr "Merging slices and calculating statistics"
+
+#: src/libslic3r/SLAPrint.cpp:72
+msgid "Rasterizing layers"
+msgstr "Rasterizing layers"
+
+#: src/libslic3r/SLAPrint.cpp:605
+msgid ""
+"Cannot proceed without support points! Add support points or disable support "
+"generation."
+msgstr ""
+"Cannot proceed without support points! Add support points or disable support "
+"generation."
+
+#: src/libslic3r/SLAPrint.cpp:617
+msgid "Elevation is too low for object."
+msgstr "Elevation is too low for object."
+
+#: src/libslic3r/SLAPrint.cpp:699
+msgid "Slicing had to be stopped due to an internal error."
+msgstr "Slicing had to be stopped due to an internal error."
+
+#: src/libslic3r/SLAPrint.cpp:849 src/libslic3r/SLAPrint.cpp:859
+#: src/libslic3r/SLAPrint.cpp:907
+msgid "Visualizing supports"
+msgstr "Visualizing supports"
+
+#: src/libslic3r/SLAPrint.cpp:1449
+msgid "Slicing done"
+msgstr "Slicing done"
+
+#: src/libslic3r/PrintBase.cpp:65
+msgid "Failed processing of the output_filename_format template."
+msgstr "Failed processing of the output_filename_format template."
+
+#: src/libslic3r/PrintConfig.cpp:42 src/libslic3r/PrintConfig.cpp:43
+msgid "Printer technology"
+msgstr "Printer technology"
+
+#: src/libslic3r/PrintConfig.cpp:50
+msgid "Bed shape"
+msgstr "Bed shape"
+
+#: src/libslic3r/PrintConfig.cpp:57
+msgid ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+msgstr ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+
+#: src/libslic3r/PrintConfig.cpp:64
+msgid "Max print height"
+msgstr "Max print height"
+
+#: src/libslic3r/PrintConfig.cpp:65
+msgid ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+msgstr ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+
+#: src/libslic3r/PrintConfig.cpp:71
+msgid "Slice gap closing radius"
+msgstr "Slice gap closing radius"
+
+#: src/libslic3r/PrintConfig.cpp:73
+msgid ""
+"Cracks smaller than 2x gap closing radius are being filled during the "
+"triangle mesh slicing. The gap closing operation may reduce the final print "
+"resolution, therefore it is advisable to keep the value reasonably low."
+msgstr ""
+"Cracks smaller than 2x gap closing radius are being filled during the "
+"triangle mesh slicing. The gap closing operation may reduce the final print "
+"resolution, therefore it is advisable to keep the value reasonably low."
+
+#: src/libslic3r/PrintConfig.cpp:81
+msgid "Hostname, IP or URL"
+msgstr "Hostname, IP or URL"
+
+#: src/libslic3r/PrintConfig.cpp:82
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+
+#: src/libslic3r/PrintConfig.cpp:88
+msgid "API Key / Password"
+msgstr "API Key / Password"
+
+#: src/libslic3r/PrintConfig.cpp:89
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+
+#: src/libslic3r/PrintConfig.cpp:111
+msgid "Avoid crossing perimeters"
+msgstr "Avoid crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:112
+msgid ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+msgstr ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+
+#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:1976
+msgid "Other layers"
+msgstr "Other layers"
+
+#: src/libslic3r/PrintConfig.cpp:120
+msgid ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+msgstr ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:122
+msgid "Bed temperature"
+msgstr "Bed temperature"
+
+#: src/libslic3r/PrintConfig.cpp:129
+msgid ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+msgstr ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:139
+msgid "Between objects G-code"
+msgstr "Between objects G-code"
+
+#: src/libslic3r/PrintConfig.cpp:140
+msgid ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+
+#: src/libslic3r/PrintConfig.cpp:150
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr "Number of solid layers to generate on bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:151
+msgid "Bottom solid layers"
+msgstr "Bottom solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:156
+msgid "Bridge"
+msgstr "Bridge"
+
+#: src/libslic3r/PrintConfig.cpp:157
+msgid ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+msgstr ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+
+#: src/libslic3r/PrintConfig.cpp:159 src/libslic3r/PrintConfig.cpp:302
+#: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:935
+#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1133
+#: src/libslic3r/PrintConfig.cpp:1144 src/libslic3r/PrintConfig.cpp:1333
+msgid "mm/s²"
+msgstr "mm/s²"
+
+#: src/libslic3r/PrintConfig.cpp:165
+msgid "Bridging angle"
+msgstr "Bridging angle"
+
+#: src/libslic3r/PrintConfig.cpp:167
+msgid ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+msgstr ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+
+#: src/libslic3r/PrintConfig.cpp:170 src/libslic3r/PrintConfig.cpp:732
+#: src/libslic3r/PrintConfig.cpp:1569 src/libslic3r/PrintConfig.cpp:1579
+#: src/libslic3r/PrintConfig.cpp:1807 src/libslic3r/PrintConfig.cpp:1961
+#: src/libslic3r/PrintConfig.cpp:2459
+msgid "°"
+msgstr "°"
+
+#: src/libslic3r/PrintConfig.cpp:176
+msgid "Bridges fan speed"
+msgstr "Bridges fan speed"
+
+#: src/libslic3r/PrintConfig.cpp:177
+msgid "This fan speed is enforced during all bridges and overhangs."
+msgstr "This fan speed is enforced during all bridges and overhangs."
+
+#: src/libslic3r/PrintConfig.cpp:178 src/libslic3r/PrintConfig.cpp:744
+#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1216
+#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:2258
+#: src/libslic3r/PrintConfig.cpp:2498
+msgid "%"
+msgstr "%"
+
+#: src/libslic3r/PrintConfig.cpp:185
+msgid "Bridge flow ratio"
+msgstr "Bridge flow ratio"
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+msgstr ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+
+#: src/libslic3r/PrintConfig.cpp:197
+msgid "Bridges"
+msgstr "Bridges"
+
+#: src/libslic3r/PrintConfig.cpp:199
+msgid "Speed for printing bridges."
+msgstr "Speed for printing bridges."
+
+#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:576
+#: src/libslic3r/PrintConfig.cpp:584 src/libslic3r/PrintConfig.cpp:593
+#: src/libslic3r/PrintConfig.cpp:601 src/libslic3r/PrintConfig.cpp:628
+#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:873
+#: src/libslic3r/PrintConfig.cpp:1000 src/libslic3r/PrintConfig.cpp:1078
+#: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1111
+#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1175
+#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:1362
+#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1545
+#: src/libslic3r/PrintConfig.cpp:1940 src/libslic3r/PrintConfig.cpp:2051
+msgid "mm/s"
+msgstr "mm/s"
+
+#: src/libslic3r/PrintConfig.cpp:207
+msgid "Brim width"
+msgstr "Brim width"
+
+#: src/libslic3r/PrintConfig.cpp:208
+msgid ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+
+#: src/libslic3r/PrintConfig.cpp:215
+msgid "Clip multi-part objects"
+msgstr "Clip multi-part objects"
+
+#: src/libslic3r/PrintConfig.cpp:216
+msgid ""
+"When printing multi-material objects, this settings will make slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+"When printing multi-material objects, this settings will make slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+
+#: src/libslic3r/PrintConfig.cpp:223
+msgid "Colorprint height"
+msgstr "Colorprint height"
+
+#: src/libslic3r/PrintConfig.cpp:224
+msgid "Heights at which a filament change is to occur. "
+msgstr "Heights at which a filament change is to occur. "
+
+#: src/libslic3r/PrintConfig.cpp:234
+msgid "Compatible printers condition"
+msgstr "Compatible printers condition"
+
+#: src/libslic3r/PrintConfig.cpp:235
+msgid ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+msgstr ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+
+#: src/libslic3r/PrintConfig.cpp:249
+msgid "Compatible print profiles condition"
+msgstr "Compatible print profiles condition"
+
+#: src/libslic3r/PrintConfig.cpp:250
+msgid ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+msgstr ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+
+#: src/libslic3r/PrintConfig.cpp:267
+msgid "Complete individual objects"
+msgstr "Complete individual objects"
+
+#: src/libslic3r/PrintConfig.cpp:268
+msgid ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+msgstr ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+
+#: src/libslic3r/PrintConfig.cpp:276
+msgid "Enable auto cooling"
+msgstr "Enable auto cooling"
+
+#: src/libslic3r/PrintConfig.cpp:277
+msgid ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+msgstr ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+
+#: src/libslic3r/PrintConfig.cpp:282
+msgid "Cooling tube position"
+msgstr "Cooling tube position"
+
+#: src/libslic3r/PrintConfig.cpp:283
+msgid "Distance of the center-point of the cooling tube from the extruder tip "
+msgstr ""
+"Distance of the center-point of the cooling tube from the extruder tip "
+
+#: src/libslic3r/PrintConfig.cpp:290
+msgid "Cooling tube length"
+msgstr "Cooling tube length"
+
+#: src/libslic3r/PrintConfig.cpp:291
+msgid "Length of the cooling tube to limit space for cooling moves inside it "
+msgstr "Length of the cooling tube to limit space for cooling moves inside it "
+
+#: src/libslic3r/PrintConfig.cpp:299
+msgid ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+msgstr ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+
+#: src/libslic3r/PrintConfig.cpp:308
+msgid "Default filament profile"
+msgstr "Default filament profile"
+
+#: src/libslic3r/PrintConfig.cpp:309
+msgid ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+msgstr ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+
+#: src/libslic3r/PrintConfig.cpp:315
+msgid "Default print profile"
+msgstr "Default print profile"
+
+#: src/libslic3r/PrintConfig.cpp:316 src/libslic3r/PrintConfig.cpp:2337
+#: src/libslic3r/PrintConfig.cpp:2348
+msgid ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+msgstr ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+
+#: src/libslic3r/PrintConfig.cpp:322
+msgid "Disable fan for the first"
+msgstr "Disable fan for the first"
+
+#: src/libslic3r/PrintConfig.cpp:323
+msgid ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+msgstr ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+
+#: src/libslic3r/PrintConfig.cpp:325 src/libslic3r/PrintConfig.cpp:945
+#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1619
+#: src/libslic3r/PrintConfig.cpp:1680 src/libslic3r/PrintConfig.cpp:1843
+#: src/libslic3r/PrintConfig.cpp:1888
+msgid "layers"
+msgstr "layers"
+
+#: src/libslic3r/PrintConfig.cpp:332
+msgid "Don't support bridges"
+msgstr "Don't support bridges"
+
+#: src/libslic3r/PrintConfig.cpp:334
+msgid ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+msgstr ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+
+#: src/libslic3r/PrintConfig.cpp:340
+msgid "Distance between copies"
+msgstr "Distance between copies"
+
+#: src/libslic3r/PrintConfig.cpp:341
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr "Distance used for the auto-arrange feature of the plater."
+
+#: src/libslic3r/PrintConfig.cpp:348
+msgid "Elephant foot compensation"
+msgstr "Elephant foot compensation"
+
+#: src/libslic3r/PrintConfig.cpp:350
+msgid ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+msgstr ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+
+#: src/libslic3r/PrintConfig.cpp:359
+msgid ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+msgstr ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+
+#: src/libslic3r/PrintConfig.cpp:369
+msgid ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+msgstr ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+
+#: src/libslic3r/PrintConfig.cpp:379
+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+#: src/libslic3r/PrintConfig.cpp:381
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
+#: src/libslic3r/PrintConfig.cpp:387
+msgid "Top fill pattern"
+msgstr "Top fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:389
+msgid ""
+"Fill pattern for top infill. This only affects the top visible layer, and "
+"not its adjacent solid shells."
+msgstr ""
+"Fill pattern for top infill. This only affects the top visible layer, and "
+"not its adjacent solid shells."
+
+#: src/libslic3r/PrintConfig.cpp:397 src/libslic3r/PrintConfig.cpp:795
+#: src/libslic3r/PrintConfig.cpp:1921
+msgid "Rectilinear"
+msgstr "Rectilinear"
+
+#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:801
+msgid "Concentric"
+msgstr "Concentric"
+
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:805
+msgid "Hilbert Curve"
+msgstr "Hilbert Curve"
+
+#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:806
+msgid "Archimedean Chords"
+msgstr "Archimedean Chords"
+
+#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
+msgid "Octagram Spiral"
+msgstr "Octagram Spiral"
+
+#: src/libslic3r/PrintConfig.cpp:408
+msgid "Bottom fill pattern"
+msgstr "Bottom fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:409
+msgid ""
+"Fill pattern for bottom infill. This only affects the bottom external "
+"visible layer, and not its adjacent solid shells."
+msgstr ""
+"Fill pattern for bottom infill. This only affects the bottom external "
+"visible layer, and not its adjacent solid shells."
+
+#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:424
+msgid "External perimeters"
+msgstr "External perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:416
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:834
+#: src/libslic3r/PrintConfig.cpp:966 src/libslic3r/PrintConfig.cpp:1353
+#: src/libslic3r/PrintConfig.cpp:1691 src/libslic3r/PrintConfig.cpp:1864
+#: src/libslic3r/PrintConfig.cpp:2022
+msgid "mm or % (leave 0 for default)"
+msgstr "mm or % (leave 0 for default)"
+
+#: src/libslic3r/PrintConfig.cpp:426
+msgid ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855
+#: src/libslic3r/PrintConfig.cpp:1650 src/libslic3r/PrintConfig.cpp:1701
+#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:2034
+msgid "mm/s or %"
+msgstr "mm/s or %"
+
+#: src/libslic3r/PrintConfig.cpp:436
+msgid "External perimeters first"
+msgstr "External perimeters first"
+
+#: src/libslic3r/PrintConfig.cpp:438
+msgid ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+msgstr ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid "Extra perimeters if needed"
+msgstr "Extra perimeters if needed"
+
+#: src/libslic3r/PrintConfig.cpp:446
+#, no-c-format
+msgid ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+msgstr ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+
+#: src/libslic3r/PrintConfig.cpp:456
+msgid ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+msgstr ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+
+#: src/libslic3r/PrintConfig.cpp:468
+msgid ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+msgstr ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+
+#: src/libslic3r/PrintConfig.cpp:478
+msgid "Radius"
+msgstr "Radius"
+
+#: src/libslic3r/PrintConfig.cpp:479
+msgid ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+msgstr ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+
+#: src/libslic3r/PrintConfig.cpp:489
+msgid "Extruder Color"
+msgstr "Extruder Color"
+
+#: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:550
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr "This is only used in the Slic3r interface as a visual help."
+
+#: src/libslic3r/PrintConfig.cpp:496
+msgid "Extruder offset"
+msgstr "Extruder offset"
+
+#: src/libslic3r/PrintConfig.cpp:497
+msgid ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+msgstr ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+
+#: src/libslic3r/PrintConfig.cpp:506
+msgid "Extrusion axis"
+msgstr "Extrusion axis"
+
+#: src/libslic3r/PrintConfig.cpp:507
+msgid ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+msgstr ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+
+#: src/libslic3r/PrintConfig.cpp:512
+msgid "Extrusion multiplier"
+msgstr "Extrusion multiplier"
+
+#: src/libslic3r/PrintConfig.cpp:513
+msgid ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+msgstr ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+
+#: src/libslic3r/PrintConfig.cpp:521
+msgid "Default extrusion width"
+msgstr "Default extrusion width"
+
+#: src/libslic3r/PrintConfig.cpp:523
+msgid ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+msgstr ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+
+#: src/libslic3r/PrintConfig.cpp:527
+msgid "mm or % (leave 0 for auto)"
+msgstr "mm or % (leave 0 for auto)"
+
+#: src/libslic3r/PrintConfig.cpp:532
+msgid "Keep fan always on"
+msgstr "Keep fan always on"
+
+#: src/libslic3r/PrintConfig.cpp:533
+msgid ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+msgstr ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+
+#: src/libslic3r/PrintConfig.cpp:538
+msgid "Enable fan if layer print time is below"
+msgstr "Enable fan if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:539
+msgid ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+msgstr ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+
+#: src/libslic3r/PrintConfig.cpp:541 src/libslic3r/PrintConfig.cpp:1637
+msgid "approximate seconds"
+msgstr "approximate seconds"
+
+#: src/libslic3r/PrintConfig.cpp:549
+msgid "Color"
+msgstr "Color"
+
+#: src/libslic3r/PrintConfig.cpp:555
+msgid "Filament notes"
+msgstr "Filament notes"
+
+#: src/libslic3r/PrintConfig.cpp:556
+msgid "You can put your notes regarding the filament here."
+msgstr "You can put your notes regarding the filament here."
+
+#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:1181
+msgid "Max volumetric speed"
+msgstr "Max volumetric speed"
+
+#: src/libslic3r/PrintConfig.cpp:565
+msgid ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+msgstr ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+
+#: src/libslic3r/PrintConfig.cpp:568 src/libslic3r/PrintConfig.cpp:1184
+msgid "mm³/s"
+msgstr "mm³/s"
+
+#: src/libslic3r/PrintConfig.cpp:574
+msgid "Loading speed"
+msgstr "Loading speed"
+
+#: src/libslic3r/PrintConfig.cpp:575
+msgid "Speed used for loading the filament on the wipe tower. "
+msgstr "Speed used for loading the filament on the wipe tower. "
+
+#: src/libslic3r/PrintConfig.cpp:582
+msgid "Loading speed at the start"
+msgstr "Loading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:583
+msgid "Speed used at the very beginning of loading phase. "
+msgstr "Speed used at the very beginning of loading phase. "
+
+#: src/libslic3r/PrintConfig.cpp:590
+msgid "Unloading speed"
+msgstr "Unloading speed"
+
+#: src/libslic3r/PrintConfig.cpp:591
+msgid ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming). "
+msgstr ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming). "
+
+#: src/libslic3r/PrintConfig.cpp:599
+msgid "Unloading speed at the start"
+msgstr "Unloading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:600
+msgid ""
+"Speed used for unloading the tip of the filament immediately after ramming. "
+msgstr ""
+"Speed used for unloading the tip of the filament immediately after ramming. "
+
+#: src/libslic3r/PrintConfig.cpp:607
+msgid "Delay after unloading"
+msgstr "Delay after unloading"
+
+#: src/libslic3r/PrintConfig.cpp:608
+msgid ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions. "
+msgstr ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions. "
+
+#: src/libslic3r/PrintConfig.cpp:617
+msgid "Number of cooling moves"
+msgstr "Number of cooling moves"
+
+#: src/libslic3r/PrintConfig.cpp:618
+msgid ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves "
+msgstr ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves "
+
+#: src/libslic3r/PrintConfig.cpp:626
+msgid "Speed of the first cooling move"
+msgstr "Speed of the first cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:627
+msgid "Cooling moves are gradually accelerating beginning at this speed. "
+msgstr "Cooling moves are gradually accelerating beginning at this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:634
+msgid "Minimal purge on wipe tower"
+msgstr "Minimal purge on wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:635
+msgid ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+msgstr ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+
+#: src/libslic3r/PrintConfig.cpp:639
+msgid "mm³"
+msgstr "mm³"
+
+#: src/libslic3r/PrintConfig.cpp:645
+msgid "Speed of the last cooling move"
+msgstr "Speed of the last cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:646
+msgid "Cooling moves are gradually accelerating towards this speed. "
+msgstr "Cooling moves are gradually accelerating towards this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:653
+msgid "Filament load time"
+msgstr "Filament load time"
+
+#: src/libslic3r/PrintConfig.cpp:654
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:661
+msgid "Ramming parameters"
+msgstr "Ramming parameters"
+
+#: src/libslic3r/PrintConfig.cpp:662
+msgid ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters "
+msgstr ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters "
+
+#: src/libslic3r/PrintConfig.cpp:668
+msgid "Filament unload time"
+msgstr "Filament unload time"
+
+#: src/libslic3r/PrintConfig.cpp:669
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:677
+msgid ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+msgstr ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+
+#: src/libslic3r/PrintConfig.cpp:684
+msgid "Density"
+msgstr "Density"
+
+#: src/libslic3r/PrintConfig.cpp:685
+msgid ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+msgstr ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+
+#: src/libslic3r/PrintConfig.cpp:688
+msgid "g/cm³"
+msgstr "g/cm³"
+
+#: src/libslic3r/PrintConfig.cpp:693
+msgid "Filament type"
+msgstr "Filament type"
+
+#: src/libslic3r/PrintConfig.cpp:694
+msgid "The filament material type for use in custom G-codes."
+msgstr "The filament material type for use in custom G-codes."
+
+#: src/libslic3r/PrintConfig.cpp:710
+msgid "Soluble material"
+msgstr "Soluble material"
+
+#: src/libslic3r/PrintConfig.cpp:711
+msgid "Soluble material is most likely used for a soluble support."
+msgstr "Soluble material is most likely used for a soluble support."
+
+#: src/libslic3r/PrintConfig.cpp:717
+msgid ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+msgstr ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+
+#: src/libslic3r/PrintConfig.cpp:718
+msgid "money/kg"
+msgstr "money/kg"
+
+#: src/libslic3r/PrintConfig.cpp:727
+msgid "Fill angle"
+msgstr "Fill angle"
+
+#: src/libslic3r/PrintConfig.cpp:729
+msgid ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+msgstr ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+
+#: src/libslic3r/PrintConfig.cpp:741
+msgid "Fill density"
+msgstr "Fill density"
+
+#: src/libslic3r/PrintConfig.cpp:743
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr "Density of internal infill, expressed in the range 0% - 100%."
+
+#: src/libslic3r/PrintConfig.cpp:778
+msgid "Fill pattern"
+msgstr "Fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:780
+msgid "Fill pattern for general low-density infill."
+msgstr "Fill pattern for general low-density infill."
+
+#: src/libslic3r/PrintConfig.cpp:796
+msgid "Grid"
+msgstr "Grid"
+
+#: src/libslic3r/PrintConfig.cpp:797
+msgid "Triangles"
+msgstr "Triangles"
+
+#: src/libslic3r/PrintConfig.cpp:798
+msgid "Stars"
+msgstr "Stars"
+
+#: src/libslic3r/PrintConfig.cpp:799
+msgid "Cubic"
+msgstr "Cubic"
+
+#: src/libslic3r/PrintConfig.cpp:800
+msgid "Line"
+msgstr "Line"
+
+#: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:1923
+msgid "Honeycomb"
+msgstr "Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:803
+msgid "3D Honeycomb"
+msgstr "3D Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:804
+msgid "Gyroid"
+msgstr "Gyroid"
+
+#: src/libslic3r/PrintConfig.cpp:811 src/libslic3r/PrintConfig.cpp:820
+#: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:861
+msgid "First layer"
+msgstr "First layer"
+
+#: src/libslic3r/PrintConfig.cpp:812
+msgid ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+msgstr ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+
+#: src/libslic3r/PrintConfig.cpp:821
+msgid ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+msgstr ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:830
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+
+#: src/libslic3r/PrintConfig.cpp:840
+msgid "First layer height"
+msgstr "First layer height"
+
+#: src/libslic3r/PrintConfig.cpp:842
+msgid ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+msgstr ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+
+#: src/libslic3r/PrintConfig.cpp:846 src/libslic3r/PrintConfig.cpp:991
+#: src/libslic3r/PrintConfig.cpp:1796
+msgid "mm or %"
+msgstr "mm or %"
+
+#: src/libslic3r/PrintConfig.cpp:851
+msgid "First layer speed"
+msgstr "First layer speed"
+
+#: src/libslic3r/PrintConfig.cpp:852
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+msgstr ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+
+#: src/libslic3r/PrintConfig.cpp:862
+msgid ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+msgstr ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+
+#: src/libslic3r/PrintConfig.cpp:871
+msgid ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+msgstr ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+
+#: src/libslic3r/PrintConfig.cpp:879
+msgid "Verbose G-code"
+msgstr "Verbose G-code"
+
+#: src/libslic3r/PrintConfig.cpp:880
+msgid ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+msgstr ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+
+#: src/libslic3r/PrintConfig.cpp:887
+msgid "G-code flavor"
+msgstr "G-code flavor"
+
+#: src/libslic3r/PrintConfig.cpp:888
+msgid ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+msgstr ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+
+#: src/libslic3r/PrintConfig.cpp:911
+msgid "No extrusion"
+msgstr "No extrusion"
+
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "High extruder current on filament swap"
+msgstr "High extruder current on filament swap"
+
+#: src/libslic3r/PrintConfig.cpp:925
+msgid ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+msgstr ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+
+#: src/libslic3r/PrintConfig.cpp:933
+msgid ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+msgstr ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+
+#: src/libslic3r/PrintConfig.cpp:941
+msgid "Combine infill every"
+msgstr "Combine infill every"
+
+#: src/libslic3r/PrintConfig.cpp:943
+msgid ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+
+#: src/libslic3r/PrintConfig.cpp:946
+msgid "Combine infill every n layers"
+msgstr "Combine infill every n layers"
+
+#: src/libslic3r/PrintConfig.cpp:952
+msgid "Infill extruder"
+msgstr "Infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:954
+msgid "The extruder to use when printing infill."
+msgstr "The extruder to use when printing infill."
+
+#: src/libslic3r/PrintConfig.cpp:962
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:971
+msgid "Infill before perimeters"
+msgstr "Infill before perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:972
+msgid ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+msgstr ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+
+#: src/libslic3r/PrintConfig.cpp:977
+msgid "Only infill where needed"
+msgstr "Only infill where needed"
+
+#: src/libslic3r/PrintConfig.cpp:979
+msgid ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+msgstr ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+
+#: src/libslic3r/PrintConfig.cpp:986
+msgid "Infill/perimeters overlap"
+msgstr "Infill/perimeters overlap"
+
+#: src/libslic3r/PrintConfig.cpp:988
+msgid ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+msgstr ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+
+#: src/libslic3r/PrintConfig.cpp:999
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr "Speed for printing the internal fill. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1007
+msgid "Inherits profile"
+msgstr "Inherits profile"
+
+#: src/libslic3r/PrintConfig.cpp:1008
+msgid "Name of the profile, from which this profile inherits."
+msgstr "Name of the profile, from which this profile inherits."
+
+#: src/libslic3r/PrintConfig.cpp:1021
+msgid "Interface shells"
+msgstr "Interface shells"
+
+#: src/libslic3r/PrintConfig.cpp:1022
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+msgstr ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+
+#: src/libslic3r/PrintConfig.cpp:1031
+msgid ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+msgstr ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:1042
+msgid "Supports remaining times"
+msgstr "Supports remaining times"
+
+#: src/libslic3r/PrintConfig.cpp:1043
+msgid ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+msgstr ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+
+#: src/libslic3r/PrintConfig.cpp:1051
+msgid "Supports silent mode"
+msgstr "Supports silent mode"
+
+#: src/libslic3r/PrintConfig.cpp:1052
+msgid "Set silent mode for the G-code flavor"
+msgstr "Set silent mode for the G-code flavor"
+
+#: src/libslic3r/PrintConfig.cpp:1075
+msgid "Maximum feedrate %1%"
+msgstr "Maximum feedrate %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1077
+msgid "Maximum feedrate of the %1% axis"
+msgstr "Maximum feedrate of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1085
+msgid "Maximum acceleration %1%"
+msgstr "Maximum acceleration %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1087
+msgid "Maximum acceleration of the %1% axis"
+msgstr "Maximum acceleration of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1095
+msgid "Maximum jerk %1%"
+msgstr "Maximum jerk %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1097
+msgid "Maximum jerk of the %1% axis"
+msgstr "Maximum jerk of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1110
+msgid "Minimum feedrate when extruding"
+msgstr "Minimum feedrate when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1121
+msgid "Minimum travel feedrate"
+msgstr "Minimum travel feedrate"
+
+#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1132
+msgid "Maximum acceleration when extruding"
+msgstr "Maximum acceleration when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:1141 src/libslic3r/PrintConfig.cpp:1143
+msgid "Maximum acceleration when retracting"
+msgstr "Maximum acceleration when retracting"
+
+#: src/libslic3r/PrintConfig.cpp:1151 src/libslic3r/PrintConfig.cpp:1160
+msgid "Max"
+msgstr "Max"
+
+#: src/libslic3r/PrintConfig.cpp:1152
+msgid "This setting represents the maximum speed of your fan."
+msgstr "This setting represents the maximum speed of your fan."
+
+#: src/libslic3r/PrintConfig.cpp:1161
+#, no-c-format
+msgid ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:1171
+msgid "Max print speed"
+msgstr "Max print speed"
+
+#: src/libslic3r/PrintConfig.cpp:1172
+msgid ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+msgstr ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+
+#: src/libslic3r/PrintConfig.cpp:1182
+msgid ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+msgstr ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+
+#: src/libslic3r/PrintConfig.cpp:1191
+msgid "Max volumetric slope positive"
+msgstr "Max volumetric slope positive"
+
+#: src/libslic3r/PrintConfig.cpp:1192 src/libslic3r/PrintConfig.cpp:1203
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+
+#: src/libslic3r/PrintConfig.cpp:1196 src/libslic3r/PrintConfig.cpp:1207
+msgid "mm³/s²"
+msgstr "mm³/s²"
+
+#: src/libslic3r/PrintConfig.cpp:1202
+msgid "Max volumetric slope negative"
+msgstr "Max volumetric slope negative"
+
+#: src/libslic3r/PrintConfig.cpp:1214 src/libslic3r/PrintConfig.cpp:1223
+msgid "Min"
+msgstr "Min"
+
+#: src/libslic3r/PrintConfig.cpp:1215
+msgid "This setting represents the minimum PWM your fan needs to work."
+msgstr "This setting represents the minimum PWM your fan needs to work."
+
+#: src/libslic3r/PrintConfig.cpp:1224
+msgid ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+msgstr ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+
+#: src/libslic3r/PrintConfig.cpp:1232
+msgid "Min print speed"
+msgstr "Min print speed"
+
+#: src/libslic3r/PrintConfig.cpp:1233
+msgid "Slic3r will not scale speed down below this speed."
+msgstr "Slic3r will not scale speed down below this speed."
+
+#: src/libslic3r/PrintConfig.cpp:1240
+msgid "Minimal filament extrusion length"
+msgstr "Minimal filament extrusion length"
+
+#: src/libslic3r/PrintConfig.cpp:1241
+msgid ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+msgstr ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+
+#: src/libslic3r/PrintConfig.cpp:1250
+msgid "Configuration notes"
+msgstr "Configuration notes"
+
+#: src/libslic3r/PrintConfig.cpp:1251
+msgid ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+msgstr ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+
+#: src/libslic3r/PrintConfig.cpp:1260
+msgid "Nozzle diameter"
+msgstr "Nozzle diameter"
+
+#: src/libslic3r/PrintConfig.cpp:1261
+msgid ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+
+#: src/libslic3r/PrintConfig.cpp:1266
+msgid "Host Type"
+msgstr "Host Type"
+
+#: src/libslic3r/PrintConfig.cpp:1267
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+
+#: src/libslic3r/PrintConfig.cpp:1278
+msgid "Only retract when crossing perimeters"
+msgstr "Only retract when crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1279
+msgid ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+msgstr ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+
+#: src/libslic3r/PrintConfig.cpp:1286
+msgid ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+msgstr ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+
+#: src/libslic3r/PrintConfig.cpp:1293
+msgid "Output filename format"
+msgstr "Output filename format"
+
+#: src/libslic3r/PrintConfig.cpp:1294
+msgid ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+msgstr ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+
+#: src/libslic3r/PrintConfig.cpp:1303
+msgid "Detect bridging perimeters"
+msgstr "Detect bridging perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1305
+msgid ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+msgstr ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+
+#: src/libslic3r/PrintConfig.cpp:1311
+msgid "Filament parking position"
+msgstr "Filament parking position"
+
+#: src/libslic3r/PrintConfig.cpp:1312
+msgid ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware. "
+msgstr ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware. "
+
+#: src/libslic3r/PrintConfig.cpp:1320
+msgid "Extra loading distance"
+msgstr "Extra loading distance"
+
+#: src/libslic3r/PrintConfig.cpp:1321
+msgid ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading. "
+msgstr ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading. "
+
+#: src/libslic3r/PrintConfig.cpp:1329 src/libslic3r/PrintConfig.cpp:1347
+#: src/libslic3r/PrintConfig.cpp:1359 src/libslic3r/PrintConfig.cpp:1369
+msgid "Perimeters"
+msgstr "Perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1330
+msgid ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+msgstr ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+
+#: src/libslic3r/PrintConfig.cpp:1338
+msgid "Perimeter extruder"
+msgstr "Perimeter extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1340
+msgid ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+
+#: src/libslic3r/PrintConfig.cpp:1349
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1361
+msgid ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1371
+msgid ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+msgstr ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+
+#: src/libslic3r/PrintConfig.cpp:1375
+msgid "(minimum)"
+msgstr "(minimum)"
+
+#: src/libslic3r/PrintConfig.cpp:1383
+msgid ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+msgstr ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+
+#: src/libslic3r/PrintConfig.cpp:1395
+msgid "Printer type"
+msgstr "Printer type"
+
+#: src/libslic3r/PrintConfig.cpp:1396
+msgid "Type of the printer."
+msgstr "Type of the printer."
+
+#: src/libslic3r/PrintConfig.cpp:1401
+msgid "Printer notes"
+msgstr "Printer notes"
+
+#: src/libslic3r/PrintConfig.cpp:1402
+msgid "You can put your notes regarding the printer here."
+msgstr "You can put your notes regarding the printer here."
+
+#: src/libslic3r/PrintConfig.cpp:1410
+msgid "Printer vendor"
+msgstr "Printer vendor"
+
+#: src/libslic3r/PrintConfig.cpp:1411
+msgid "Name of the printer vendor."
+msgstr "Name of the printer vendor."
+
+#: src/libslic3r/PrintConfig.cpp:1416
+msgid "Printer variant"
+msgstr "Printer variant"
+
+#: src/libslic3r/PrintConfig.cpp:1417
+msgid ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+msgstr ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:1430
+msgid "Raft layers"
+msgstr "Raft layers"
+
+#: src/libslic3r/PrintConfig.cpp:1432
+msgid ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+msgstr ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+
+#: src/libslic3r/PrintConfig.cpp:1440
+msgid "Resolution"
+msgstr "Resolution"
+
+#: src/libslic3r/PrintConfig.cpp:1441
+msgid ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+msgstr ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+
+#: src/libslic3r/PrintConfig.cpp:1451
+msgid "Minimum travel after retraction"
+msgstr "Minimum travel after retraction"
+
+#: src/libslic3r/PrintConfig.cpp:1452
+msgid ""
+"Retraction is not triggered when travel moves are shorter than this length."
+msgstr ""
+"Retraction is not triggered when travel moves are shorter than this length."
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid "Retract amount before wipe"
+msgstr "Retract amount before wipe"
+
+#: src/libslic3r/PrintConfig.cpp:1459
+msgid ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+msgstr ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+
+#: src/libslic3r/PrintConfig.cpp:1466
+msgid "Retract on layer change"
+msgstr "Retract on layer change"
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr "This flag enforces a retraction whenever a Z move is done."
+
+#: src/libslic3r/PrintConfig.cpp:1472 src/libslic3r/PrintConfig.cpp:1480
+msgid "Length"
+msgstr "Length"
+
+#: src/libslic3r/PrintConfig.cpp:1473
+msgid "Retraction Length"
+msgstr "Retraction Length"
+
+#: src/libslic3r/PrintConfig.cpp:1474
+msgid ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+msgstr ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:1476 src/libslic3r/PrintConfig.cpp:1485
+msgid "mm (zero to disable)"
+msgstr "mm (zero to disable)"
+
+#: src/libslic3r/PrintConfig.cpp:1481
+msgid "Retraction Length (Toolchange)"
+msgstr "Retraction Length (Toolchange)"
+
+#: src/libslic3r/PrintConfig.cpp:1482
+msgid ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+msgstr ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:1490
+msgid "Lift Z"
+msgstr "Lift Z"
+
+#: src/libslic3r/PrintConfig.cpp:1491
+msgid ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+msgstr ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+
+#: src/libslic3r/PrintConfig.cpp:1498
+msgid "Above Z"
+msgstr "Above Z"
+
+#: src/libslic3r/PrintConfig.cpp:1499
+msgid "Only lift Z above"
+msgstr "Only lift Z above"
+
+#: src/libslic3r/PrintConfig.cpp:1500
+msgid ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+msgstr ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid "Below Z"
+msgstr "Below Z"
+
+#: src/libslic3r/PrintConfig.cpp:1508
+msgid "Only lift Z below"
+msgstr "Only lift Z below"
+
+#: src/libslic3r/PrintConfig.cpp:1509
+msgid ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+msgstr ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+
+#: src/libslic3r/PrintConfig.cpp:1517 src/libslic3r/PrintConfig.cpp:1525
+msgid "Extra length on restart"
+msgstr "Extra length on restart"
+
+#: src/libslic3r/PrintConfig.cpp:1518
+msgid ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+msgstr ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+
+#: src/libslic3r/PrintConfig.cpp:1526
+msgid ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+msgstr ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+
+#: src/libslic3r/PrintConfig.cpp:1533 src/libslic3r/PrintConfig.cpp:1534
+msgid "Retraction Speed"
+msgstr "Retraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:1535
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr "The speed for retractions (it only applies to the extruder motor)."
+
+#: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:1542
+msgid "Deretraction Speed"
+msgstr "Deretraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:1543
+msgid ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+msgstr ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+
+#: src/libslic3r/PrintConfig.cpp:1550
+msgid "Seam position"
+msgstr "Seam position"
+
+#: src/libslic3r/PrintConfig.cpp:1552
+msgid "Position of perimeters starting points."
+msgstr "Position of perimeters starting points."
+
+#: src/libslic3r/PrintConfig.cpp:1558
+msgid "Random"
+msgstr "Random"
+
+#: src/libslic3r/PrintConfig.cpp:1559
+msgid "Nearest"
+msgstr "Nearest"
+
+#: src/libslic3r/PrintConfig.cpp:1560
+msgid "Aligned"
+msgstr "Aligned"
+
+#: src/libslic3r/PrintConfig.cpp:1568
+msgid "Direction"
+msgstr "Direction"
+
+#: src/libslic3r/PrintConfig.cpp:1570
+msgid "Preferred direction of the seam"
+msgstr "Preferred direction of the seam"
+
+#: src/libslic3r/PrintConfig.cpp:1571
+msgid "Seam preferred direction"
+msgstr "Seam preferred direction"
+
+#: src/libslic3r/PrintConfig.cpp:1578
+msgid "Jitter"
+msgstr "Jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1580
+msgid "Seam preferred direction jitter"
+msgstr "Seam preferred direction jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid "Preferred direction of the seam - jitter"
+msgstr "Preferred direction of the seam - jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1591
+msgid "USB/serial port for printer connection."
+msgstr "USB/serial port for printer connection."
+
+#: src/libslic3r/PrintConfig.cpp:1598
+msgid "Serial port speed"
+msgstr "Serial port speed"
+
+#: src/libslic3r/PrintConfig.cpp:1599
+msgid "Speed (baud) of USB/serial port for printer connection."
+msgstr "Speed (baud) of USB/serial port for printer connection."
+
+#: src/libslic3r/PrintConfig.cpp:1608
+msgid "Distance from object"
+msgstr "Distance from object"
+
+#: src/libslic3r/PrintConfig.cpp:1609
+msgid ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+msgstr ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+
+#: src/libslic3r/PrintConfig.cpp:1616
+msgid "Skirt height"
+msgstr "Skirt height"
+
+#: src/libslic3r/PrintConfig.cpp:1617
+msgid ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+msgstr ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+
+#: src/libslic3r/PrintConfig.cpp:1624
+msgid "Loops (minimum)"
+msgstr "Loops (minimum)"
+
+#: src/libslic3r/PrintConfig.cpp:1625
+msgid "Skirt Loops"
+msgstr "Skirt Loops"
+
+#: src/libslic3r/PrintConfig.cpp:1626
+msgid ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+msgstr ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+
+#: src/libslic3r/PrintConfig.cpp:1634
+msgid "Slow down if layer print time is below"
+msgstr "Slow down if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:1635
+msgid ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+msgstr ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+
+#: src/libslic3r/PrintConfig.cpp:1645
+msgid "Small perimeters"
+msgstr "Small perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1647
+msgid ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1657
+msgid "Solid infill threshold area"
+msgstr "Solid infill threshold area"
+
+#: src/libslic3r/PrintConfig.cpp:1659
+msgid ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+msgstr ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+
+#: src/libslic3r/PrintConfig.cpp:1660
+msgid "mm²"
+msgstr "mm²"
+
+#: src/libslic3r/PrintConfig.cpp:1666
+msgid "Solid infill extruder"
+msgstr "Solid infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1668
+msgid "The extruder to use when printing solid infill."
+msgstr "The extruder to use when printing solid infill."
+
+#: src/libslic3r/PrintConfig.cpp:1674
+msgid "Solid infill every"
+msgstr "Solid infill every"
+
+#: src/libslic3r/PrintConfig.cpp:1676
+msgid ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+msgstr ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1688
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1698
+msgid ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+msgstr ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1710
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr "Number of solid layers to generate on top and bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:1716
+msgid "Spiral vase"
+msgstr "Spiral vase"
+
+#: src/libslic3r/PrintConfig.cpp:1717
+msgid ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+msgstr ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+
+#: src/libslic3r/PrintConfig.cpp:1725
+msgid "Temperature variation"
+msgstr "Temperature variation"
+
+#: src/libslic3r/PrintConfig.cpp:1726
+msgid ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+msgstr ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+
+#: src/libslic3r/PrintConfig.cpp:1736
+msgid ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+
+#: src/libslic3r/PrintConfig.cpp:1751
+msgid ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+msgstr ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+
+#: src/libslic3r/PrintConfig.cpp:1766
+msgid "Single Extruder Multi Material"
+msgstr "Single Extruder Multi Material"
+
+#: src/libslic3r/PrintConfig.cpp:1767
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr "The printer multiplexes filaments into a single hot end."
+
+#: src/libslic3r/PrintConfig.cpp:1772
+msgid "Prime all printing extruders"
+msgstr "Prime all printing extruders"
+
+#: src/libslic3r/PrintConfig.cpp:1773
+msgid ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+msgstr ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+
+#: src/libslic3r/PrintConfig.cpp:1778
+msgid "Generate support material"
+msgstr "Generate support material"
+
+#: src/libslic3r/PrintConfig.cpp:1780
+msgid "Enable support material generation."
+msgstr "Enable support material generation."
+
+#: src/libslic3r/PrintConfig.cpp:1784
+msgid "Auto generated supports"
+msgstr "Auto generated supports"
+
+#: src/libslic3r/PrintConfig.cpp:1786
+msgid ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+msgstr ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+
+#: src/libslic3r/PrintConfig.cpp:1792
+msgid "XY separation between an object and its support"
+msgstr "XY separation between an object and its support"
+
+#: src/libslic3r/PrintConfig.cpp:1794
+msgid ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+msgstr ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+
+#: src/libslic3r/PrintConfig.cpp:1804
+msgid "Pattern angle"
+msgstr "Pattern angle"
+
+#: src/libslic3r/PrintConfig.cpp:1806
+msgid ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+msgstr ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+
+#: src/libslic3r/PrintConfig.cpp:1816 src/libslic3r/PrintConfig.cpp:2421
+msgid ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+msgstr ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+
+#: src/libslic3r/PrintConfig.cpp:1822
+msgid "Contact Z distance"
+msgstr "Contact Z distance"
+
+#: src/libslic3r/PrintConfig.cpp:1824
+msgid ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+msgstr ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+
+#: src/libslic3r/PrintConfig.cpp:1831
+msgid "soluble"
+msgstr "soluble"
+
+#: src/libslic3r/PrintConfig.cpp:1832
+msgid "detachable"
+msgstr "detachable"
+
+#: src/libslic3r/PrintConfig.cpp:1837
+msgid "Enforce support for the first"
+msgstr "Enforce support for the first"
+
+#: src/libslic3r/PrintConfig.cpp:1839
+msgid ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+msgstr ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+
+#: src/libslic3r/PrintConfig.cpp:1844
+msgid "Enforce support for the first n layers"
+msgstr "Enforce support for the first n layers"
+
+#: src/libslic3r/PrintConfig.cpp:1850
+msgid "Support material/raft/skirt extruder"
+msgstr "Support material/raft/skirt extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1852
+msgid ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+msgstr ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+
+#: src/libslic3r/PrintConfig.cpp:1861
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1869
+msgid "Interface loops"
+msgstr "Interface loops"
+
+#: src/libslic3r/PrintConfig.cpp:1871
+msgid ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:1876
+msgid "Support material/raft interface extruder"
+msgstr "Support material/raft interface extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1878
+msgid ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+msgstr ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+
+#: src/libslic3r/PrintConfig.cpp:1885
+msgid "Interface layers"
+msgstr "Interface layers"
+
+#: src/libslic3r/PrintConfig.cpp:1887
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+msgstr ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+
+#: src/libslic3r/PrintConfig.cpp:1894
+msgid "Interface pattern spacing"
+msgstr "Interface pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:1896
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr "Spacing between interface lines. Set zero to get a solid interface."
+
+#: src/libslic3r/PrintConfig.cpp:1905
+msgid ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+msgstr ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+
+#: src/libslic3r/PrintConfig.cpp:1914
+msgid "Pattern"
+msgstr "Pattern"
+
+#: src/libslic3r/PrintConfig.cpp:1916
+msgid "Pattern used to generate support material."
+msgstr "Pattern used to generate support material."
+
+#: src/libslic3r/PrintConfig.cpp:1922
+msgid "Rectilinear grid"
+msgstr "Rectilinear grid"
+
+#: src/libslic3r/PrintConfig.cpp:1928
+msgid "Pattern spacing"
+msgstr "Pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:1930
+msgid "Spacing between support material lines."
+msgstr "Spacing between support material lines."
+
+#: src/libslic3r/PrintConfig.cpp:1939
+msgid "Speed for printing support material."
+msgstr "Speed for printing support material."
+
+#: src/libslic3r/PrintConfig.cpp:1946
+msgid "Synchronize with object layers"
+msgstr "Synchronize with object layers"
+
+#: src/libslic3r/PrintConfig.cpp:1948
+msgid ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+msgstr ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+
+#: src/libslic3r/PrintConfig.cpp:1954
+msgid "Overhang threshold"
+msgstr "Overhang threshold"
+
+#: src/libslic3r/PrintConfig.cpp:1956
+msgid ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+msgstr ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+
+#: src/libslic3r/PrintConfig.cpp:1968
+msgid "With sheath around the support"
+msgstr "With sheath around the support"
+
+#: src/libslic3r/PrintConfig.cpp:1970
+msgid ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+msgstr ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+
+#: src/libslic3r/PrintConfig.cpp:1977
+msgid ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+msgstr ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:1979
+msgid "Temperature"
+msgstr "Temperature"
+
+#: src/libslic3r/PrintConfig.cpp:1985
+msgid "Detect thin walls"
+msgstr "Detect thin walls"
+
+#: src/libslic3r/PrintConfig.cpp:1987
+msgid ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+msgstr ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+
+#: src/libslic3r/PrintConfig.cpp:1993
+msgid "Threads"
+msgstr "Threads"
+
+#: src/libslic3r/PrintConfig.cpp:1994
+msgid ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+msgstr ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+
+#: src/libslic3r/PrintConfig.cpp:2006
+msgid ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+msgstr ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+
+#: src/libslic3r/PrintConfig.cpp:2018
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:2029
+msgid ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+msgstr ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+
+#: src/libslic3r/PrintConfig.cpp:2043
+msgid "Number of solid layers to generate on top surfaces."
+msgstr "Number of solid layers to generate on top surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:2044
+msgid "Top solid layers"
+msgstr "Top solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:2050
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr "Speed for travel moves (jumps between distant extrusion points)."
+
+#: src/libslic3r/PrintConfig.cpp:2058
+msgid "Use firmware retraction"
+msgstr "Use firmware retraction"
+
+#: src/libslic3r/PrintConfig.cpp:2059
+msgid ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+msgstr ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:2065
+msgid "Use relative E distances"
+msgstr "Use relative E distances"
+
+#: src/libslic3r/PrintConfig.cpp:2066
+msgid ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+msgstr ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+
+#: src/libslic3r/PrintConfig.cpp:2072
+msgid "Use volumetric E"
+msgstr "Use volumetric E"
+
+#: src/libslic3r/PrintConfig.cpp:2073
+msgid ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+msgstr ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:2083
+msgid "Enable variable layer height feature"
+msgstr "Enable variable layer height feature"
+
+#: src/libslic3r/PrintConfig.cpp:2084
+msgid ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+msgstr ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:2090
+msgid "Wipe while retracting"
+msgstr "Wipe while retracting"
+
+#: src/libslic3r/PrintConfig.cpp:2091
+msgid ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+msgstr ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+
+#: src/libslic3r/PrintConfig.cpp:2098
+msgid ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+msgstr ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+
+#: src/libslic3r/PrintConfig.cpp:2104
+msgid "Purging volumes - load/unload volumes"
+msgstr "Purging volumes - load/unload volumes"
+
+#: src/libslic3r/PrintConfig.cpp:2105
+msgid ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below. "
+msgstr ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below. "
+
+#: src/libslic3r/PrintConfig.cpp:2111
+msgid "Purging volumes - matrix"
+msgstr "Purging volumes - matrix"
+
+#: src/libslic3r/PrintConfig.cpp:2112
+msgid ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools. "
+msgstr ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools. "
+
+#: src/libslic3r/PrintConfig.cpp:2121
+msgid "Position X"
+msgstr "Position X"
+
+#: src/libslic3r/PrintConfig.cpp:2122
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr "X coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2128
+msgid "Position Y"
+msgstr "Position Y"
+
+#: src/libslic3r/PrintConfig.cpp:2129
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr "Y coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2136
+msgid "Width of a wipe tower"
+msgstr "Width of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2142
+msgid "Wipe tower rotation angle"
+msgstr "Wipe tower rotation angle"
+
+#: src/libslic3r/PrintConfig.cpp:2143
+msgid "Wipe tower rotation angle with respect to x-axis "
+msgstr "Wipe tower rotation angle with respect to x-axis "
+
+#: src/libslic3r/PrintConfig.cpp:2144 src/libslic3r/PrintConfig.cpp:2565
+msgid "degrees"
+msgstr "degrees"
+
+#: src/libslic3r/PrintConfig.cpp:2150
+msgid "Wipe into this object's infill"
+msgstr "Wipe into this object's infill"
+
+#: src/libslic3r/PrintConfig.cpp:2151
+msgid ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+msgstr ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+
+#: src/libslic3r/PrintConfig.cpp:2158
+msgid "Wipe into this object"
+msgstr "Wipe into this object"
+
+#: src/libslic3r/PrintConfig.cpp:2159
+msgid ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+msgstr ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+
+#: src/libslic3r/PrintConfig.cpp:2165
+msgid "Maximal bridging distance"
+msgstr "Maximal bridging distance"
+
+#: src/libslic3r/PrintConfig.cpp:2166
+msgid "Maximal distance between supports on sparse infill sections. "
+msgstr "Maximal distance between supports on sparse infill sections. "
+
+#: src/libslic3r/PrintConfig.cpp:2172
+msgid "XY Size Compensation"
+msgstr "XY Size Compensation"
+
+#: src/libslic3r/PrintConfig.cpp:2174
+msgid ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+msgstr ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+
+#: src/libslic3r/PrintConfig.cpp:2182
+msgid "Z offset"
+msgstr "Z offset"
+
+#: src/libslic3r/PrintConfig.cpp:2183
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+
+#: src/libslic3r/PrintConfig.cpp:2200
+msgid "Display width"
+msgstr "Display width"
+
+#: src/libslic3r/PrintConfig.cpp:2201
+msgid "Width of the display"
+msgstr "Width of the display"
+
+#: src/libslic3r/PrintConfig.cpp:2206
+msgid "Display height"
+msgstr "Display height"
+
+#: src/libslic3r/PrintConfig.cpp:2207
+msgid "Height of the display"
+msgstr "Height of the display"
+
+#: src/libslic3r/PrintConfig.cpp:2212
+msgid "Number of pixels in"
+msgstr "Number of pixels in"
+
+#: src/libslic3r/PrintConfig.cpp:2214
+msgid "Number of pixels in X"
+msgstr "Number of pixels in X"
+
+#: src/libslic3r/PrintConfig.cpp:2220
+msgid "Number of pixels in Y"
+msgstr "Number of pixels in Y"
+
+#: src/libslic3r/PrintConfig.cpp:2225
+msgid "Display orientation"
+msgstr "Display orientation"
+
+#: src/libslic3r/PrintConfig.cpp:2226
+msgid ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+msgstr ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+
+#: src/libslic3r/PrintConfig.cpp:2232
+msgid "Landscape"
+msgstr "Landscape"
+
+#: src/libslic3r/PrintConfig.cpp:2233
+msgid "Portrait"
+msgstr "Portrait"
+
+#: src/libslic3r/PrintConfig.cpp:2238
+msgid "Fast"
+msgstr "Fast"
+
+#: src/libslic3r/PrintConfig.cpp:2239
+msgid "Fast tilt"
+msgstr "Fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:2240
+msgid "Time of the fast tilt"
+msgstr "Time of the fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Slow"
+msgstr "Slow"
+
+#: src/libslic3r/PrintConfig.cpp:2248
+msgid "Slow tilt"
+msgstr "Slow tilt"
+
+#: src/libslic3r/PrintConfig.cpp:2249
+msgid "Time of the slow tilt"
+msgstr "Time of the slow tilt"
+
+#: src/libslic3r/PrintConfig.cpp:2256
+msgid "Area fill"
+msgstr "Area fill"
+
+#: src/libslic3r/PrintConfig.cpp:2257
+msgid ""
+"The percentage of the bed area. \n"
+"If the print area exceeds the specified value, \n"
+"then a slow tilt will be used, otherwise - a fast tilt"
+msgstr ""
+"The percentage of the bed area. \n"
+"If the print area exceeds the specified value, \n"
+"then a slow tilt will be used, otherwise - a fast tilt"
+
+#: src/libslic3r/PrintConfig.cpp:2264 src/libslic3r/PrintConfig.cpp:2265
+#: src/libslic3r/PrintConfig.cpp:2266
+msgid "Printer scaling correction"
+msgstr "Printer scaling correction"
+
+#: src/libslic3r/PrintConfig.cpp:2272 src/libslic3r/PrintConfig.cpp:2273
+msgid "Printer absolute correction"
+msgstr "Printer absolute correction"
+
+#: src/libslic3r/PrintConfig.cpp:2274
+msgid ""
+"Will inflate or deflate the sliced 2D polygons according to the sign of the "
+"correction."
+msgstr ""
+"Will inflate or deflate the sliced 2D polygons according to the sign of the "
+"correction."
+
+#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2281
+msgid "Printer gamma correction"
+msgstr "Printer gamma correction"
+
+#: src/libslic3r/PrintConfig.cpp:2282
+msgid "This will apply a gamm correction to the rasterized 2D polygons."
+msgstr "This will apply a gamm correction to the rasterized 2D polygons."
+
+#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
+msgid "Initial layer height"
+msgstr "Initial layer height"
+
+#: src/libslic3r/PrintConfig.cpp:2298
+msgid "Faded layers"
+msgstr "Faded layers"
+
+#: src/libslic3r/PrintConfig.cpp:2299
+msgid ""
+"Number of the layers needed for the exposure time fade from initial exposure "
+"time to the exposure time"
+msgstr ""
+"Number of the layers needed for the exposure time fade from initial exposure "
+"time to the exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:2306 src/libslic3r/PrintConfig.cpp:2307
+msgid "Exposure time"
+msgstr "Exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:2313 src/libslic3r/PrintConfig.cpp:2314
+msgid "Initial exposure time"
+msgstr "Initial exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
+msgid "Correction for expansion"
+msgstr "Correction for expansion"
+
+#: src/libslic3r/PrintConfig.cpp:2327
+msgid "SLA print material notes"
+msgstr "SLA print material notes"
+
+#: src/libslic3r/PrintConfig.cpp:2328
+msgid "You can put your notes regarding the SLA print material here."
+msgstr "You can put your notes regarding the SLA print material here."
+
+#: src/libslic3r/PrintConfig.cpp:2336 src/libslic3r/PrintConfig.cpp:2347
+msgid "Default SLA material profile"
+msgstr "Default SLA material profile"
+
+#: src/libslic3r/PrintConfig.cpp:2358
+msgid "Generate supports"
+msgstr "Generate supports"
+
+#: src/libslic3r/PrintConfig.cpp:2360
+msgid "Generate supports for the models"
+msgstr "Generate supports for the models"
+
+#: src/libslic3r/PrintConfig.cpp:2365
+msgid "Support head front diameter"
+msgstr "Support head front diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2367
+msgid "Diameter of the pointing side of the head"
+msgstr "Diameter of the pointing side of the head"
+
+#: src/libslic3r/PrintConfig.cpp:2374
+msgid "Support head penetration"
+msgstr "Support head penetration"
+
+#: src/libslic3r/PrintConfig.cpp:2376
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr "How much the pinhead has to penetrate the model surface"
+
+#: src/libslic3r/PrintConfig.cpp:2383
+msgid "Support head width"
+msgstr "Support head width"
+
+#: src/libslic3r/PrintConfig.cpp:2385
+msgid "Width from the back sphere center to the front sphere center"
+msgstr "Width from the back sphere center to the front sphere center"
+
+#: src/libslic3r/PrintConfig.cpp:2393
+msgid "Support pillar diameter"
+msgstr "Support pillar diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2395
+msgid "Diameter in mm of the support pillars"
+msgstr "Diameter in mm of the support pillars"
+
+#: src/libslic3r/PrintConfig.cpp:2403
+msgid "Support pillar connection mode"
+msgstr "Support pillar connection mode"
+
+#: src/libslic3r/PrintConfig.cpp:2404
+msgid ""
+"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+msgstr ""
+"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+
+#: src/libslic3r/PrintConfig.cpp:2412
+msgid "Zig-Zag"
+msgstr "Zig-Zag"
+
+#: src/libslic3r/PrintConfig.cpp:2413
+msgid "Cross"
+msgstr "Cross"
+
+#: src/libslic3r/PrintConfig.cpp:2414
+msgid "Dynamic"
+msgstr "Dynamic"
+
+#: src/libslic3r/PrintConfig.cpp:2426
+msgid "Pillar widening factor"
+msgstr "Pillar widening factor"
+
+#: src/libslic3r/PrintConfig.cpp:2428
+msgid ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+msgstr ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+
+#: src/libslic3r/PrintConfig.cpp:2437
+msgid "Support base diameter"
+msgstr "Support base diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2439
+msgid "Diameter in mm of the pillar base"
+msgstr "Diameter in mm of the pillar base"
+
+#: src/libslic3r/PrintConfig.cpp:2447
+msgid "Support base height"
+msgstr "Support base height"
+
+#: src/libslic3r/PrintConfig.cpp:2449
+msgid "The height of the pillar base cone"
+msgstr "The height of the pillar base cone"
+
+#: src/libslic3r/PrintConfig.cpp:2456
+msgid "Critical angle"
+msgstr "Critical angle"
+
+#: src/libslic3r/PrintConfig.cpp:2458
+msgid "The default angle for connecting support sticks and junctions."
+msgstr "The default angle for connecting support sticks and junctions."
+
+#: src/libslic3r/PrintConfig.cpp:2466
+msgid "Max bridge length"
+msgstr "Max bridge length"
+
+#: src/libslic3r/PrintConfig.cpp:2468
+msgid "The max length of a bridge"
+msgstr "The max length of a bridge"
+
+#: src/libslic3r/PrintConfig.cpp:2475
+msgid "Max pillar linking distance"
+msgstr "Max pillar linking distance"
+
+#: src/libslic3r/PrintConfig.cpp:2477
+msgid ""
+"The max distance of two pillars to get linked with each other. A zero value "
+"will prohibit pillar cascading."
+msgstr ""
+"The max distance of two pillars to get linked with each other. A zero value "
+"will prohibit pillar cascading."
+
+#: src/libslic3r/PrintConfig.cpp:2485
+msgid "Object elevation"
+msgstr "Object elevation"
+
+#: src/libslic3r/PrintConfig.cpp:2487
+msgid "How much the supports should lift up the supported object."
+msgstr "How much the supports should lift up the supported object."
+
+#: src/libslic3r/PrintConfig.cpp:2495
+msgid "Support points density"
+msgstr "Support points density"
+
+#: src/libslic3r/PrintConfig.cpp:2497
+msgid "This is a relative measure of support points density."
+msgstr "This is a relative measure of support points density."
+
+#: src/libslic3r/PrintConfig.cpp:2503
+msgid "Minimal distance of the support points"
+msgstr "Minimal distance of the support points"
+
+#: src/libslic3r/PrintConfig.cpp:2505
+msgid "No support points will be placed closer than this threshold."
+msgstr "No support points will be placed closer than this threshold."
+
+#: src/libslic3r/PrintConfig.cpp:2511
+msgid "Use pad"
+msgstr "Use pad"
+
+#: src/libslic3r/PrintConfig.cpp:2513
+msgid "Add a pad underneath the supported model"
+msgstr "Add a pad underneath the supported model"
+
+#: src/libslic3r/PrintConfig.cpp:2518
+msgid "Pad wall thickness"
+msgstr "Pad wall thickness"
+
+#: src/libslic3r/PrintConfig.cpp:2520
+msgid "The thickness of the pad and its optional cavity walls."
+msgstr "The thickness of the pad and its optional cavity walls."
+
+#: src/libslic3r/PrintConfig.cpp:2528
+msgid "Pad wall height"
+msgstr "Pad wall height"
+
+#: src/libslic3r/PrintConfig.cpp:2529
+msgid "Defines the cavity depth. Set to zero to disable the cavity."
+msgstr "Defines the cavity depth. Set to zero to disable the cavity."
+
+#: src/libslic3r/PrintConfig.cpp:2539
+msgid "Max merge distance"
+msgstr "Max merge distance"
+
+#: src/libslic3r/PrintConfig.cpp:2541
+msgid ""
+"Some objects can get along with a few smaller pads instead of a single big "
+"one. This parameter defines how far the center of two smaller pads should "
+"be. If theyare closer, they will get merged into one pad."
+msgstr ""
+"Some objects can get along with a few smaller pads instead of a single big "
+"one. This parameter defines how far the center of two smaller pads should "
+"be. If theyare closer, they will get merged into one pad."
+
+#: src/libslic3r/PrintConfig.cpp:2552
+msgid "Pad edge radius"
+msgstr "Pad edge radius"
+
+#: src/libslic3r/PrintConfig.cpp:2561
+msgid "Pad wall slope"
+msgstr "Pad wall slope"
+
+#: src/libslic3r/PrintConfig.cpp:2563
+msgid ""
+"The slope of the pad wall relative to the bed plane. 90 degrees means "
+"straight walls."
+msgstr ""
+"The slope of the pad wall relative to the bed plane. 90 degrees means "
+"straight walls."
+
+#: src/libslic3r/PrintConfig.cpp:2924
+msgid "Export SVG"
+msgstr "Export SVG"
+
+#: src/libslic3r/PrintConfig.cpp:2925
+msgid "Export the model(s) as OBJ."
+msgstr "Export the model(s) as OBJ."
+
+#: src/libslic3r/PrintConfig.cpp:2936
+msgid "Export SLA"
+msgstr "Export SLA"
+
+#: src/libslic3r/PrintConfig.cpp:2937
+msgid "Slice the model and export SLA printing layers as PNG."
+msgstr "Slice the model and export SLA printing layers as PNG."
+
+#: src/libslic3r/PrintConfig.cpp:2942
+msgid "Export 3MF"
+msgstr "Export 3MF"
+
+#: src/libslic3r/PrintConfig.cpp:2943
+msgid "Export the model(s) as 3MF."
+msgstr "Export the model(s) as 3MF."
+
+#: src/libslic3r/PrintConfig.cpp:2947
+msgid "Export AMF"
+msgstr "Export AMF"
+
+#: src/libslic3r/PrintConfig.cpp:2948
+msgid "Export the model(s) as AMF."
+msgstr "Export the model(s) as AMF."
+
+#: src/libslic3r/PrintConfig.cpp:2952
+msgid "Export STL"
+msgstr "Export STL"
+
+#: src/libslic3r/PrintConfig.cpp:2953
+msgid "Export the model(s) as STL."
+msgstr "Export the model(s) as STL."
+
+#: src/libslic3r/PrintConfig.cpp:2958
+msgid "Slice the model and export toolpaths as G-code."
+msgstr "Slice the model and export toolpaths as G-code."
+
+#: src/libslic3r/PrintConfig.cpp:2963
+msgid "Slice"
+msgstr "Slice"
+
+#: src/libslic3r/PrintConfig.cpp:2964
+msgid ""
+"Slice the model as FFF or SLA based on the printer_technology configuration "
+"value."
+msgstr ""
+"Slice the model as FFF or SLA based on the printer_technology configuration "
+"value."
+
+#: src/libslic3r/PrintConfig.cpp:2969
+msgid "Help"
+msgstr "Help"
+
+#: src/libslic3r/PrintConfig.cpp:2970
+msgid "Show this help."
+msgstr "Show this help."
+
+#: src/libslic3r/PrintConfig.cpp:2975
+msgid "Help (FFF options)"
+msgstr "Help (FFF options)"
+
+#: src/libslic3r/PrintConfig.cpp:2976
+msgid "Show the full list of print/G-code configuration options."
+msgstr "Show the full list of print/G-code configuration options."
+
+#: src/libslic3r/PrintConfig.cpp:2980
+msgid "Help (SLA options)"
+msgstr "Help (SLA options)"
+
+#: src/libslic3r/PrintConfig.cpp:2981
+msgid "Show the full list of SLA print configuration options."
+msgstr "Show the full list of SLA print configuration options."
+
+#: src/libslic3r/PrintConfig.cpp:2985
+msgid "Output Model Info"
+msgstr "Output Model Info"
+
+#: src/libslic3r/PrintConfig.cpp:2986
+msgid "Write information about the model to the console."
+msgstr "Write information about the model to the console."
+
+#: src/libslic3r/PrintConfig.cpp:2990
+msgid "Save config file"
+msgstr "Save config file"
+
+#: src/libslic3r/PrintConfig.cpp:2991
+msgid "Save configuration to the specified file."
+msgstr "Save configuration to the specified file."
+
+#: src/libslic3r/PrintConfig.cpp:3001
+msgid "Align XY"
+msgstr "Align XY"
+
+#: src/libslic3r/PrintConfig.cpp:3002
+msgid "Align the model to the given point."
+msgstr "Align the model to the given point."
+
+#: src/libslic3r/PrintConfig.cpp:3007
+msgid "Cut model at the given Z."
+msgstr "Cut model at the given Z."
+
+#: src/libslic3r/PrintConfig.cpp:3028
+msgid "Center"
+msgstr "Center"
+
+#: src/libslic3r/PrintConfig.cpp:3029
+msgid "Center the print around the given center."
+msgstr "Center the print around the given center."
+
+#: src/libslic3r/PrintConfig.cpp:3033
+msgid "Don't arrange"
+msgstr "Don't arrange"
+
+#: src/libslic3r/PrintConfig.cpp:3034
+msgid ""
+"Do not rearrange the given models before merging and keep their original XY "
+"coordinates."
+msgstr ""
+"Do not rearrange the given models before merging and keep their original XY "
+"coordinates."
+
+#: src/libslic3r/PrintConfig.cpp:3037
+msgid "Duplicate"
+msgstr "Duplicate"
+
+#: src/libslic3r/PrintConfig.cpp:3038
+msgid "Multiply copies by this factor."
+msgstr "Multiply copies by this factor."
+
+#: src/libslic3r/PrintConfig.cpp:3042
+msgid "Duplicate by grid"
+msgstr "Duplicate by grid"
+
+#: src/libslic3r/PrintConfig.cpp:3043
+msgid "Multiply copies by creating a grid."
+msgstr "Multiply copies by creating a grid."
+
+#: src/libslic3r/PrintConfig.cpp:3046
+msgid "Merge"
+msgstr "Merge"
+
+#: src/libslic3r/PrintConfig.cpp:3047
+msgid ""
+"Arrange the supplied models in a plate and merge them in a single model in "
+"order to perform actions once."
+msgstr ""
+"Arrange the supplied models in a plate and merge them in a single model in "
+"order to perform actions once."
+
+#: src/libslic3r/PrintConfig.cpp:3052
+msgid ""
+"Try to repair any non-manifold meshes (this option is implicitly added "
+"whenever we need to slice the model to perform the requested action)."
+msgstr ""
+"Try to repair any non-manifold meshes (this option is implicitly added "
+"whenever we need to slice the model to perform the requested action)."
+
+#: src/libslic3r/PrintConfig.cpp:3056
+msgid "Rotation angle around the Z axis in degrees."
+msgstr "Rotation angle around the Z axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:3060
+msgid "Rotate around X"
+msgstr "Rotate around X"
+
+#: src/libslic3r/PrintConfig.cpp:3061
+msgid "Rotation angle around the X axis in degrees."
+msgstr "Rotation angle around the X axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:3065
+msgid "Rotate around Y"
+msgstr "Rotate around Y"
+
+#: src/libslic3r/PrintConfig.cpp:3066
+msgid "Rotation angle around the Y axis in degrees."
+msgstr "Rotation angle around the Y axis in degrees."
+
+#: src/libslic3r/PrintConfig.cpp:3071
+msgid "Scaling factor or percentage."
+msgstr "Scaling factor or percentage."
+
+#: src/libslic3r/PrintConfig.cpp:3076
+msgid ""
+"Detect unconnected parts in the given model(s) and split them into separate "
+"objects."
+msgstr ""
+"Detect unconnected parts in the given model(s) and split them into separate "
+"objects."
+
+#: src/libslic3r/PrintConfig.cpp:3079
+msgid "Scale to Fit"
+msgstr "Scale to Fit"
+
+#: src/libslic3r/PrintConfig.cpp:3080
+msgid "Scale to fit the given volume."
+msgstr "Scale to fit the given volume."
+
+#: src/libslic3r/PrintConfig.cpp:3089
+msgid "Ignore non-existent config files"
+msgstr "Ignore non-existent config files"
+
+#: src/libslic3r/PrintConfig.cpp:3090
+msgid "Do not fail if a file supplied to --load does not exist."
+msgstr "Do not fail if a file supplied to --load does not exist."
+
+#: src/libslic3r/PrintConfig.cpp:3093
+msgid "Load config file"
+msgstr "Load config file"
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+msgstr ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+
+#: src/libslic3r/PrintConfig.cpp:3097
+msgid "Output File"
+msgstr "Output File"
+
+#: src/libslic3r/PrintConfig.cpp:3098
+msgid ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+msgstr ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+
+#: src/libslic3r/PrintConfig.cpp:3108
+msgid "Data directory"
+msgstr "Data directory"
+
+#: src/libslic3r/PrintConfig.cpp:3109
+msgid ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+msgstr ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Logging level"
+msgstr "Logging level"
+
+#: src/libslic3r/PrintConfig.cpp:3113
+msgid ""
+"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
+"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
+msgstr ""
+"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
+"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
+
+#: src/libslic3r/GCode/PreviewData.cpp:176
+msgid "Mixed"
+msgstr "Mixed"
+
+#: src/libslic3r/GCode/PreviewData.cpp:396
+msgid "Height (mm)"
+msgstr "Height (mm)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:398
+msgid "Width (mm)"
+msgstr "Width (mm)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:400
+msgid "Speed (mm/s)"
+msgstr "Speed (mm/s)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:402
+msgid "Volumetric flow rate (mm3/s)"
+msgstr "Volumetric flow rate (mm3/s)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:491
+msgid "Default print color"
+msgstr "Default print color"
+
+#: src/libslic3r/GCode/PreviewData.cpp:495
+#, c-format
+msgid "up to %.2f mm"
+msgstr "up to %.2f mm"
+
+#: src/libslic3r/GCode/PreviewData.cpp:499
+#, c-format
+msgid "above %.2f mm"
+msgstr "above %.2f mm"
+
+#: src/libslic3r/GCode/PreviewData.cpp:504
+#, c-format
+msgid "%.2f - %.2f mm"
+msgstr "%.2f - %.2f mm"
diff --git a/resources/localization/he_IL/Slic3r++.mo b/resources/localization/he_IL/Slic3r++.mo
new file mode 100644
index 00000000000..6295b97d268
Binary files /dev/null and b/resources/localization/he_IL/Slic3r++.mo differ
diff --git a/resources/localization/he_IL/Slic3r++_he.po b/resources/localization/he_IL/Slic3r++_he.po
new file mode 100644
index 00000000000..ddf8ebe4c66
--- /dev/null
+++ b/resources/localization/he_IL/Slic3r++_he.po
@@ -0,0 +1,7083 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-01-17 13:39+0100\n"
+"PO-Revision-Date: 2019-01-17 15:05+0100\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
+"Language-Team: \n"
+"X-Generator: Poedit 2.0.8\n"
+
+#: src/slic3r/GUI/AboutDialog.cpp:33
+msgid "About Slic3r"
+msgstr "About Slic3r"
+
+#: src/slic3r/GUI/AboutDialog.cpp:68 src/slic3r/GUI/MainFrame.cpp:51
+msgid "Version"
+msgstr "Version"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:43
+msgid "Shape"
+msgstr "Shape"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:50
+msgid "Rectangular"
+msgstr "Rectangular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:54
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:207 src/slic3r/GUI/Plater.cpp:125
+#: src/slic3r/GUI/Tab.cpp:2122
+msgid "Size"
+msgstr "Size"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:55
+msgid "Size in X and Y of the rectangular plate."
+msgstr "Size in X and Y of the rectangular plate."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:61
+msgid "Origin"
+msgstr "Origin"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:62
+msgid ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+msgstr ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:66
+msgid "Circular"
+msgstr "Circular"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:69 src/slic3r/GUI/ConfigWizard.cpp:92
+#: src/slic3r/GUI/ConfigWizard.cpp:456 src/slic3r/GUI/ConfigWizard.cpp:470
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
+#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:80
+#: src/libslic3r/PrintConfig.cpp:50 src/libslic3r/PrintConfig.cpp:58
+#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:254
+#: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:315
+#: src/libslic3r/PrintConfig.cpp:326 src/libslic3r/PrintConfig.cpp:448
+#: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:480
+#: src/libslic3r/PrintConfig.cpp:679 src/libslic3r/PrintConfig.cpp:1178
+#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1263
+#: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1365
+#: src/libslic3r/PrintConfig.cpp:1376 src/libslic3r/PrintConfig.cpp:1499
+#: src/libslic3r/PrintConfig.cpp:1508 src/libslic3r/PrintConfig.cpp:1554
+#: src/libslic3r/PrintConfig.cpp:1563 src/libslic3r/PrintConfig.cpp:1574
+#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1592
+#: src/libslic3r/PrintConfig.cpp:1682 src/libslic3r/PrintConfig.cpp:1918
+#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2031
+#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2249
+#: src/libslic3r/PrintConfig.cpp:2257 src/libslic3r/PrintConfig.cpp:2291
+#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2313
+#: src/libslic3r/PrintConfig.cpp:2321 src/libslic3r/PrintConfig.cpp:2328
+#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2497
+#: src/libslic3r/PrintConfig.cpp:2506 src/libslic3r/PrintConfig.cpp:2515
+#: src/libslic3r/PrintConfig.cpp:2524 src/libslic3r/PrintConfig.cpp:2560
+#: src/libslic3r/PrintConfig.cpp:2569 src/libslic3r/PrintConfig.cpp:2587
+#: src/libslic3r/PrintConfig.cpp:2596 src/libslic3r/PrintConfig.cpp:2623
+#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2648
+#: src/libslic3r/PrintConfig.cpp:2657 src/libslic3r/PrintConfig.cpp:2666
+msgid "mm"
+msgstr "mm"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/libslic3r/PrintConfig.cpp:676
+msgid "Diameter"
+msgstr "Diameter"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:71
+msgid ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+msgstr ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:75 src/slic3r/GUI/GUI_Preview.cpp:265
+#: src/libslic3r/GCode/PreviewData.cpp:175
+msgid "Custom"
+msgstr "Custom"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:79
+msgid "Load shape from STL..."
+msgstr "Load shape from STL..."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:125
+msgid "Settings"
+msgstr "Settings"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:298
+msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:315 src/slic3r/GUI/GUI_ObjectList.cpp:835
+msgid "Error! "
+msgstr "Error! "
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:324
+msgid "The selected file contains no geometry."
+msgstr "The selected file contains no geometry."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:328
+msgid ""
+"The selected file contains several disjoint areas. This is not supported."
+msgstr ""
+"The selected file contains several disjoint areas. This is not supported."
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:419
+msgid "Bed Shape"
+msgstr "Bed Shape"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:54
+msgid "Network lookup"
+msgstr "Network lookup"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:67
+msgid "Address"
+msgstr "Address"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:68
+msgid "Hostname"
+msgstr "Hostname"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:69
+msgid "Service name"
+msgstr "Service name"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:70
+msgid "OctoPrint version"
+msgstr "OctoPrint version"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:188
+msgid "Searching for devices"
+msgstr "Searching for devices"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:195
+msgid "Finished"
+msgstr "Finished"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:15
+msgid "Buttons And Text Colors Description"
+msgstr "Buttons And Text Colors Description"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:40
+msgid "Value is the same as the system value"
+msgstr "Value is the same as the system value"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:57
+msgid ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+msgstr ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:16
+msgid "Upgrade"
+msgstr "Upgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
+msgid "Before roll back"
+msgstr "Before roll back"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
+msgid "User"
+msgstr "User"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
+msgid "Unknown"
+msgstr "Unknown"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:37
+msgid "Active: "
+msgstr "Active: "
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
+msgid "slic3r version"
+msgstr "slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 src/slic3r/GUI/Preset.cpp:1156
+msgid "print"
+msgstr "print"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
+msgid "filaments"
+msgstr "filaments"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1160
+msgid "printer"
+msgstr "printer"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 src/slic3r/GUI/Tab.cpp:838
+msgid "vendor"
+msgstr "vendor"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
+msgid "version"
+msgstr "version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
+msgid "min slic3r version"
+msgstr "min slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
+msgid "max slic3r version"
+msgstr "max slic3r version"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+msgid "model"
+msgstr "model"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
+msgid "variants"
+msgstr "variants"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+msgid "Incompatible with this Slic3r"
+msgstr "Incompatible with this Slic3r"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "Activate"
+msgstr "Activate"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:97
+msgid "Configuration Snapshots"
+msgstr "Configuration Snapshots"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:92
+msgid "nozzle"
+msgstr "nozzle"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:93
+msgid "(default)"
+msgstr "(default)"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:116
+msgid "Select all"
+msgstr "Select all"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:117
+msgid "Select none"
+msgstr "Select none"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:226
+#, c-format
+msgid "Welcome to the Slic3r %s"
+msgstr "Welcome to the Slic3r %s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:226
+msgid "Welcome"
+msgstr "Welcome"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:232 src/slic3r/GUI/GUI_App.cpp:606
+#, c-format
+msgid "Run %s"
+msgstr "Run %s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:234
+#, c-format
+msgid ""
+"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
+"configuration; just a few settings and you will be ready to print."
+msgstr ""
+"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
+"configuration; just a few settings and you will be ready to print."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:238
+msgid ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+msgstr ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:263
+msgid "Other vendors"
+msgstr "Other vendors"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:265
+msgid "Custom setup"
+msgstr "Custom setup"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:289
+msgid "Automatic updates"
+msgstr "Automatic updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:289
+msgid "Updates"
+msgstr "Updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:297 src/slic3r/GUI/Preferences.cpp:59
+msgid "Check for application updates"
+msgstr "Check for application updates"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:300 src/slic3r/GUI/Preferences.cpp:61
+msgid ""
+"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
+"version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+msgstr ""
+"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
+"version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/Preferences.cpp:67
+msgid "Update built-in Presets automatically"
+msgstr "Update built-in Presets automatically"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:307 src/slic3r/GUI/Preferences.cpp:69
+msgid ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+msgstr ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:308
+msgid ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+msgstr ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:313
+msgid ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+msgstr ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:320
+msgid "Other Vendors"
+msgstr "Other Vendors"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:322
+msgid "Pick another vendor supported by Slic3r PE:"
+msgstr "Pick another vendor supported by Slic3r PE:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:381
+msgid "Firmware Type"
+msgstr "Firmware Type"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:381 src/slic3r/GUI/Tab.cpp:1820
+msgid "Firmware"
+msgstr "Firmware"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:385
+msgid "Choose the type of firmware used by your printer."
+msgstr "Choose the type of firmware used by your printer."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:419
+msgid "Bed Shape and Size"
+msgstr "Bed Shape and Size"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:422
+msgid "Set the shape of your printer's bed."
+msgstr "Set the shape of your printer's bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:436
+msgid "Filament and Nozzle Diameters"
+msgstr "Filament and Nozzle Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:436
+msgid "Print Diameters"
+msgstr "Print Diameters"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:452
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr "Enter the diameter of your printer's hot end nozzle."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:455
+msgid "Nozzle Diameter:"
+msgstr "Nozzle Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:465
+msgid "Enter the diameter of your filament."
+msgstr "Enter the diameter of your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:466
+msgid ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+msgstr ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:469
+msgid "Filament Diameter:"
+msgstr "Filament Diameter:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:487
+msgid "Extruder and Bed Temperatures"
+msgstr "Extruder and Bed Temperatures"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:487
+msgid "Temperatures"
+msgstr "Temperatures"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:503
+msgid "Enter the temperature needed for extruding your filament."
+msgstr "Enter the temperature needed for extruding your filament."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:504
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:507
+msgid "Extrusion Temperature:"
+msgstr "Extrusion Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:508 src/slic3r/GUI/ConfigWizard.cpp:522
+msgid "°C"
+msgstr "°C"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:517
+msgid ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+msgstr ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:518
+msgid ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+msgstr ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:521
+msgid "Bed Temperature:"
+msgstr "Bed Temperature:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:833
+msgid "< &Back"
+msgstr "< &Back"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:834
+msgid "&Next >"
+msgstr "&Next >"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:835
+msgid "&Finish"
+msgstr "&Finish"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:906
+msgid "Configuration Wizard"
+msgstr "Configuration Wizard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:907
+msgid "Configuration &Wizard"
+msgstr "Configuration &Wizard"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:909
+msgid "Configuration Assistant"
+msgstr "Configuration Assistant"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:910
+msgid "Configuration &Assistant"
+msgstr "Configuration &Assistant"
+
+#: src/slic3r/GUI/Field.cpp:109
+msgid "default value"
+msgstr "default value"
+
+#: src/slic3r/GUI/Field.cpp:112
+msgid "parameter name"
+msgstr "parameter name"
+
+#: src/slic3r/GUI/Field.cpp:140
+#, c-format
+msgid "%s doesn't support percentage"
+msgstr "%s doesn't support percentage"
+
+#: src/slic3r/GUI/Field.cpp:148 src/slic3r/GUI/Field.cpp:168
+msgid ""
+"Input value contains incorrect symbol(s).\n"
+"Use, please, only digits"
+msgstr ""
+"Input value contains incorrect symbol(s).\n"
+"Use, please, only digits"
+
+#: src/slic3r/GUI/Field.cpp:153
+msgid "Input value is out of range"
+msgstr "Input value is out of range"
+
+#: src/slic3r/GUI/Field.cpp:176
+#, c-format
+msgid ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+msgstr ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+
+#: src/slic3r/GUI/Field.cpp:179
+msgid "Parameter validation"
+msgstr "Parameter validation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:133
+msgid "Flash!"
+msgstr "Flash!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:134 src/slic3r/GUI/GLGizmo.cpp:2270
+msgid "Cancel"
+msgstr "Cancel"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:135
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr "Flashing in progress. Please do not disconnect the printer!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:245
+msgid "Flashing succeeded!"
+msgstr "Flashing succeeded!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:246
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr "Flashing failed. Please see the avrdude log below."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:247
+msgid "Flashing cancelled."
+msgstr "Flashing cancelled."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:279
+#, c-format
+msgid "Flashing failed: %s"
+msgstr "Flashing failed: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:293
+#, c-format
+msgid ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+msgstr ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:380 src/slic3r/GUI/FirmwareDialog.cpp:414
+msgid ""
+"Multiple Original Prusa i3 MMU 2.0 devices found. Please only connect one at "
+"a time for flashing."
+msgstr ""
+"Multiple Original Prusa i3 MMU 2.0 devices found. Please only connect one at "
+"a time for flashing."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:508
+msgid "The device could not have been found"
+msgstr "The device could not have been found"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:581
+#, c-format
+msgid "Error accessing port at %s: %s"
+msgstr "Error accessing port at %s: %s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:690
+msgid "Firmware flasher"
+msgstr "Firmware flasher"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:712
+msgid "Firmware image:"
+msgstr "Firmware image:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:716
+msgid "Serial port:"
+msgstr "Serial port:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:718
+msgid "Autodetected"
+msgstr "Autodetected"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:719
+msgid "Rescan"
+msgstr "Rescan"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:726
+msgid "Progress:"
+msgstr "Progress:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:729
+msgid "Status:"
+msgstr "Status:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:730
+msgid "Ready"
+msgstr "Ready"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:750
+msgid "Advanced: avrdude output log"
+msgstr "Advanced: avrdude output log"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:809
+msgid ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+msgstr ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:810
+msgid "Confirmation"
+msgstr "Confirmation"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:813
+msgid "Cancelling..."
+msgstr "Cancelling..."
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4640
+msgid "Detected object outside print volume"
+msgstr "Detected object outside print volume"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:7962
+msgid "Detected toolpath outside print volume"
+msgstr "Detected toolpath outside print volume"
+
+#: src/slic3r/GUI/GLGizmo.cpp:751 src/slic3r/GUI/GUI_ObjectManipulation.cpp:300
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:322
+#: src/libslic3r/PrintConfig.cpp:3087
+msgid "Rotate"
+msgstr "Rotate"
+
+#: src/slic3r/GUI/GLGizmo.cpp:785
+msgid "Rotation (deg)"
+msgstr "Rotation (deg)"
+
+#: src/slic3r/GUI/GLGizmo.cpp:841 src/slic3r/GUI/GUI_ObjectManipulation.cpp:206
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:301
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:323
+#: src/libslic3r/PrintConfig.cpp:3111
+msgid "Scale"
+msgstr "Scale"
+
+#: src/slic3r/GUI/GLGizmo.cpp:1072
+msgid "Scale (%)"
+msgstr "Scale (%)"
+
+#: src/slic3r/GUI/GLGizmo.cpp:1200
+msgid "Move"
+msgstr "Move"
+
+#: src/slic3r/GUI/GLGizmo.cpp:1326
+msgid "Position (mm)"
+msgstr "Position (mm)"
+
+#: src/slic3r/GUI/GLGizmo.cpp:1326
+msgid "Displacement (mm)"
+msgstr "Displacement (mm)"
+
+#: src/slic3r/GUI/GLGizmo.cpp:1430
+msgid "Place on face"
+msgstr "Place on face"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2207
+msgid "Left mouse click - add point"
+msgstr "Left mouse click - add point"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2208
+msgid "Right mouse click - remove point"
+msgstr "Right mouse click - remove point"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2211
+msgid "Generate points automatically"
+msgstr "Generate points automatically"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2212
+msgid "Remove all points"
+msgstr "Remove all points"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2245
+msgid "SLA Support Points"
+msgstr "SLA Support Points"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2268 src/slic3r/GUI/GLGizmo.cpp:2468
+msgid "Rotate lower part upwards"
+msgstr "Rotate lower part upwards"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2269 src/slic3r/GUI/GLGizmo.cpp:2470
+msgid "Perform cut"
+msgstr "Perform cut"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2276
+msgid "Cut object:"
+msgstr "Cut object:"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2356 src/slic3r/GUI/GLGizmo.cpp:2461
+#: src/libslic3r/PrintConfig.cpp:3016
+msgid "Cut"
+msgstr "Cut"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2466
+msgid "Keep upper part"
+msgstr "Keep upper part"
+
+#: src/slic3r/GUI/GLGizmo.cpp:2467
+msgid "Keep lower part"
+msgstr "Keep lower part"
+
+#: src/slic3r/GUI/GUI.cpp:242
+msgid "Notice"
+msgstr "Notice"
+
+#: src/slic3r/GUI/GUI.cpp:248
+msgid "Attempt to free unreferenced scalar"
+msgstr "Attempt to free unreferenced scalar"
+
+#: src/slic3r/GUI/GUI.cpp:250 src/slic3r/GUI/WipeTowerDialog.cpp:40
+#: src/slic3r/GUI/WipeTowerDialog.cpp:322
+msgid "Warning"
+msgstr "Warning"
+
+#: src/slic3r/GUI/GUI_App.cpp:377
+msgid "Choose one file (3MF):"
+msgstr "Choose one file (3MF):"
+
+#: src/slic3r/GUI/GUI_App.cpp:389
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/GUI_App.cpp:451
+msgid "Array of language names and identifiers should have the same size."
+msgstr "Array of language names and identifiers should have the same size."
+
+#: src/slic3r/GUI/GUI_App.cpp:461
+msgid "Select the language"
+msgstr "Select the language"
+
+#: src/slic3r/GUI/GUI_App.cpp:461
+msgid "Language"
+msgstr "Language"
+
+#: src/slic3r/GUI/GUI_App.cpp:529 src/libslic3r/PrintConfig.cpp:270
+msgid "Default"
+msgstr "Default"
+
+#: src/slic3r/GUI/GUI_App.cpp:609
+msgid "&Configuration Snapshots"
+msgstr "&Configuration Snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:609
+msgid "Inspect / activate configuration snapshots"
+msgstr "Inspect / activate configuration snapshots"
+
+#: src/slic3r/GUI/GUI_App.cpp:610
+msgid "Take Configuration &Snapshot"
+msgstr "Take Configuration &Snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:610
+msgid "Capture a configuration snapshot"
+msgstr "Capture a configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:613
+msgid "&Preferences"
+msgstr "&Preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:613
+msgid "Application preferences"
+msgstr "Application preferences"
+
+#: src/slic3r/GUI/GUI_App.cpp:616
+msgid "Simple"
+msgstr "Simple"
+
+#: src/slic3r/GUI/GUI_App.cpp:616
+msgid "Simple View Mode"
+msgstr "Simple View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:39
+#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:962
+#: src/slic3r/GUI/Tab.cpp:1058 src/slic3r/GUI/Tab.cpp:1061
+#: src/slic3r/GUI/Tab.cpp:1425 src/slic3r/GUI/Tab.cpp:1840
+#: src/libslic3r/PrintConfig.cpp:156 src/libslic3r/PrintConfig.cpp:323
+#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:2298
+msgid "Advanced"
+msgstr "Advanced"
+
+#: src/slic3r/GUI/GUI_App.cpp:617
+msgid "Advanced View Mode"
+msgstr "Advanced View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:618
+msgid "Expert"
+msgstr "Expert"
+
+#: src/slic3r/GUI/GUI_App.cpp:618
+msgid "Expert View Mode"
+msgstr "Expert View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:620
+msgid "Mode"
+msgstr "Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:620
+msgid "Slic3r View Mode"
+msgstr "Slic3r View Mode"
+
+#: src/slic3r/GUI/GUI_App.cpp:622
+msgid "Change Application &Language"
+msgstr "Change Application &Language"
+
+#: src/slic3r/GUI/GUI_App.cpp:624
+msgid "Flash printer &firmware"
+msgstr "Flash printer &firmware"
+
+#: src/slic3r/GUI/GUI_App.cpp:624
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr "Upload a firmware image into an Arduino based printer"
+
+#: src/slic3r/GUI/GUI_App.cpp:636
+msgid "Taking configuration snapshot"
+msgstr "Taking configuration snapshot"
+
+#: src/slic3r/GUI/GUI_App.cpp:636
+msgid "Snapshot name"
+msgstr "Snapshot name"
+
+#: src/slic3r/GUI/GUI_App.cpp:674
+msgid "Application will be restarted"
+msgstr "Application will be restarted"
+
+#: src/slic3r/GUI/GUI_App.cpp:674 src/slic3r/GUI/Tab.cpp:2606
+msgid "Attention!"
+msgstr "Attention!"
+
+#: src/slic3r/GUI/GUI_App.cpp:691
+msgid "&Configuration"
+msgstr "&Configuration"
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid "You have unsaved changes "
+msgstr "You have unsaved changes "
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid ". Discard changes and continue anyway?"
+msgstr ". Discard changes and continue anyway?"
+
+#: src/slic3r/GUI/GUI_App.cpp:712
+msgid "Unsaved Presets"
+msgstr "Unsaved Presets"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:31 src/libslic3r/PrintConfig.cpp:47
+#: src/libslic3r/PrintConfig.cpp:115 src/libslic3r/PrintConfig.cpp:357
+#: src/libslic3r/PrintConfig.cpp:410 src/libslic3r/PrintConfig.cpp:419
+#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:1037
+#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1426
+#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2091
+#: src/libslic3r/PrintConfig.cpp:2150
+msgid "Layers and Perimeters"
+msgstr "Layers and Perimeters"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:32 src/slic3r/GUI/Tab.cpp:952
+#: src/slic3r/GUI/Tab.cpp:953 src/slic3r/GUI/Tab.cpp:1274
+#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:366
+#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:745
+#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:938
+#: src/libslic3r/PrintConfig.cpp:949 src/libslic3r/PrintConfig.cpp:969
+#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:1010
+#: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1752
+msgid "Infill"
+msgstr "Infill"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_Preview.cpp:262
+#: src/slic3r/GUI/Tab.cpp:980 src/slic3r/GUI/Tab.cpp:981
+#: src/libslic3r/PrintConfig.cpp:305 src/libslic3r/PrintConfig.cpp:1484
+#: src/libslic3r/PrintConfig.cpp:1865 src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:1881 src/libslic3r/PrintConfig.cpp:1894
+#: src/libslic3r/PrintConfig.cpp:1905 src/libslic3r/PrintConfig.cpp:1914
+#: src/libslic3r/PrintConfig.cpp:1930 src/libslic3r/PrintConfig.cpp:1953
+#: src/libslic3r/PrintConfig.cpp:1965 src/libslic3r/PrintConfig.cpp:1983
+#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2003
+#: src/libslic3r/PrintConfig.cpp:2014 src/libslic3r/PrintConfig.cpp:2029
+#: src/libslic3r/PrintConfig.cpp:2038 src/libslic3r/PrintConfig.cpp:2039
+#: src/libslic3r/PrintConfig.cpp:2048 src/libslic3r/PrintConfig.cpp:2057
+#: src/libslic3r/PrintConfig.cpp:2072 src/libslic3r/GCode/PreviewData.cpp:172
+msgid "Support material"
+msgstr "Support material"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_Preview.cpp:241
+#: src/slic3r/GUI/Tab.cpp:1005 src/libslic3r/PrintConfig.cpp:169
+#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:881
+#: src/libslic3r/PrintConfig.cpp:1011 src/libslic3r/PrintConfig.cpp:1416
+#: src/libslic3r/PrintConfig.cpp:1668 src/libslic3r/PrintConfig.cpp:1721
+#: src/libslic3r/PrintConfig.cpp:1776 src/libslic3r/PrintConfig.cpp:2136
+msgid "Speed"
+msgstr "Speed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/Tab.cpp:1038
+#: src/slic3r/GUI/Tab.cpp:1744 src/libslic3r/PrintConfig.cpp:430
+#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1393
+#: src/libslic3r/PrintConfig.cpp:1743 src/libslic3r/PrintConfig.cpp:1944
+#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:2271
+#: src/libslic3r/PrintConfig.cpp:2280
+msgid "Extruders"
+msgstr "Extruders"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/libslic3r/PrintConfig.cpp:387
+#: src/libslic3r/PrintConfig.cpp:504 src/libslic3r/PrintConfig.cpp:836
+#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1403
+#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1954
+#: src/libslic3r/PrintConfig.cpp:2124
+msgid "Extrusion Width"
+msgstr "Extrusion Width"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:41 src/slic3r/GUI/Tab.cpp:3179
+#: src/slic3r/GUI/Tab.cpp:3180 src/libslic3r/PrintConfig.cpp:2488
+#: src/libslic3r/PrintConfig.cpp:2495 src/libslic3r/PrintConfig.cpp:2504
+#: src/libslic3r/PrintConfig.cpp:2513 src/libslic3r/PrintConfig.cpp:2522
+#: src/libslic3r/PrintConfig.cpp:2547 src/libslic3r/PrintConfig.cpp:2558
+#: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2576
+#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
+#: src/libslic3r/PrintConfig.cpp:2603 src/libslic3r/PrintConfig.cpp:2612
+#: src/libslic3r/PrintConfig.cpp:2621
+msgid "Supports"
+msgstr "Supports"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:42 src/slic3r/GUI/Tab.cpp:3205
+#: src/slic3r/GUI/Tab.cpp:3206 src/libslic3r/PrintConfig.cpp:2630
+#: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2646
+#: src/libslic3r/PrintConfig.cpp:2655 src/libslic3r/PrintConfig.cpp:2664
+msgid "Pad"
+msgstr "Pad"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:115
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:129
+msgid "Name"
+msgstr "Name"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:134
+msgid "Right button click the icon to change the object settings"
+msgstr "Right button click the icon to change the object settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:142
+#, c-format
+msgid "Auto-repaired (%d errors):\n"
+msgstr "Auto-repaired (%d errors):\n"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:145
+msgid "degenerate facets"
+msgstr "degenerate facets"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:146
+msgid "edges fixed"
+msgstr "edges fixed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:147
+msgid "facets removed"
+msgstr "facets removed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:148
+msgid "facets added"
+msgstr "facets added"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:149
+msgid "facets reversed"
+msgstr "facets reversed"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:150
+msgid "backwards edges"
+msgstr "backwards edges"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:164
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr "Right button click the icon to fix STL through Netfabb"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:196 src/slic3r/GUI/Tab.cpp:1389
+#: src/libslic3r/PrintConfig.cpp:429
+msgid "Extruder"
+msgstr "Extruder"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:615
+msgid "Select showing settings"
+msgstr "Select showing settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:655
+msgid "Load"
+msgstr "Load"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659 src/slic3r/GUI/GUI_ObjectList.cpp:688
+#: src/slic3r/GUI/GUI_ObjectList.cpp:691
+msgid "Box"
+msgstr "Box"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Cylinder"
+msgstr "Cylinder"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Sphere"
+msgstr "Sphere"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:659
+msgid "Slab"
+msgstr "Slab"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:671 src/slic3r/GUI/GUI_ObjectList.cpp:685
+msgid "Add part"
+msgstr "Add part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:672
+msgid "Add modifier"
+msgstr "Add modifier"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:673 src/slic3r/GUI/GUI_ObjectList.cpp:687
+msgid "Add support enforcer"
+msgstr "Add support enforcer"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:674 src/slic3r/GUI/GUI_ObjectList.cpp:690
+msgid "Add support blocker"
+msgstr "Add support blocker"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:711
+msgid "Split to parts"
+msgstr "Split to parts"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:725
+msgid "Add settings"
+msgstr "Add settings"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:739
+msgid "Change type"
+msgstr "Change type"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1009
+msgid "You can't delete the last solid part from object."
+msgstr "You can't delete the last solid part from object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1017
+msgid "You can't delete the last intance from object."
+msgstr "You can't delete the last intance from object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1044 src/slic3r/GUI/Plater.cpp:1825
+msgid ""
+"The selected object couldn't be split because it contains only one part."
+msgstr ""
+"The selected object couldn't be split because it contains only one part."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1138
+msgid "Group manipulation"
+msgstr "Group manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1149
+msgid "Object manipulation"
+msgstr "Object manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1159
+msgid "Object Settings to modify"
+msgstr "Object Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1163
+msgid "Part Settings to modify"
+msgstr "Part Settings to modify"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1173
+msgid "Part manipulation"
+msgstr "Part manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
+msgid "Instance manipulation"
+msgstr "Instance manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
+msgid "You can't change a type of the last solid part of the object."
+msgstr "You can't change a type of the last solid part of the object."
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1662
+msgid "Select type of part"
+msgstr "Select type of part"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1744 src/slic3r/GUI/Tab.cpp:3070
+#: src/slic3r/GUI/Tab.cpp:3074
+msgid "The supplied name is not valid;"
+msgstr "The supplied name is not valid;"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1745 src/slic3r/GUI/Tab.cpp:3071
+msgid "the following characters are not allowed:"
+msgstr "the following characters are not allowed:"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:21
+msgid "Object Manipulation"
+msgstr "Object Manipulation"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:132
+msgid "Object name"
+msgstr "Object name"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
+msgid "Position"
+msgstr "Position"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:205
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:253
+msgid "Rotation"
+msgstr "Rotation"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:254
+msgid "Scale factors"
+msgstr "Scale factors"
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:321
+msgid "Translate"
+msgstr "Translate"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:235
+msgid "View"
+msgstr "View"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/GUI_Preview.cpp:550
+#: src/libslic3r/GCode/PreviewData.cpp:394
+msgid "Feature type"
+msgstr "Feature type"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/PrintConfig.cpp:443
+msgid "Height"
+msgstr "Height"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/PrintConfig.cpp:2255
+msgid "Width"
+msgstr "Width"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:242
+msgid "Volumetric flow rate"
+msgstr "Volumetric flow rate"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:243 src/slic3r/GUI/GUI_Preview.cpp:347
+#: src/slic3r/GUI/GUI_Preview.cpp:496 src/slic3r/GUI/GUI_Preview.cpp:718
+#: src/libslic3r/GCode/PreviewData.cpp:404
+msgid "Tool"
+msgstr "Tool"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:244 src/slic3r/GUI/GUI_Preview.cpp:550
+#: src/libslic3r/GCode/PreviewData.cpp:406
+msgid "Color Print"
+msgstr "Color Print"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:247
+msgid "Show"
+msgstr "Show"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/GUI_Preview.cpp:251
+msgid "Feature types"
+msgstr "Feature types"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/GCode/PreviewData.cpp:163
+msgid "Perimeter"
+msgstr "Perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254 src/libslic3r/GCode/PreviewData.cpp:164
+msgid "External perimeter"
+msgstr "External perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255 src/libslic3r/GCode/PreviewData.cpp:165
+msgid "Overhang perimeter"
+msgstr "Overhang perimeter"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256 src/libslic3r/GCode/PreviewData.cpp:166
+msgid "Internal infill"
+msgstr "Internal infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:257 src/libslic3r/PrintConfig.cpp:1764
+#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/GCode/PreviewData.cpp:167
+msgid "Solid infill"
+msgstr "Solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258 src/libslic3r/PrintConfig.cpp:2123
+#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/GCode/PreviewData.cpp:168
+msgid "Top solid infill"
+msgstr "Top solid infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:259 src/libslic3r/GCode/PreviewData.cpp:169
+msgid "Bridge infill"
+msgstr "Bridge infill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/libslic3r/PrintConfig.cpp:880
+#: src/libslic3r/GCode/PreviewData.cpp:170
+msgid "Gap fill"
+msgstr "Gap fill"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:261 src/slic3r/GUI/Tab.cpp:971
+#: src/libslic3r/GCode/PreviewData.cpp:171
+msgid "Skirt"
+msgstr "Skirt"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:263 src/libslic3r/PrintConfig.cpp:2002
+#: src/libslic3r/GCode/PreviewData.cpp:173
+msgid "Support material interface"
+msgstr "Support material interface"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:264 src/slic3r/GUI/Tab.cpp:1049
+#: src/libslic3r/GCode/PreviewData.cpp:174
+msgid "Wipe tower"
+msgstr "Wipe tower"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/PrintConfig.cpp:2158
+msgid "Travel"
+msgstr "Travel"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:270
+msgid "Retractions"
+msgstr "Retractions"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:271
+msgid "Unretractions"
+msgstr "Unretractions"
+
+#: src/slic3r/GUI/GUI_Preview.cpp:272
+msgid "Shells"
+msgstr "Shells"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:12
+msgid "Slic3r Prusa Edition - Keyboard Shortcuts"
+msgstr "Slic3r Prusa Edition - Keyboard Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:47
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Main Shortcuts"
+msgstr "Main Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
+msgstr "Open project STL/OBJ/AMF/3MF with config, delete bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
+msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
+msgstr "Import STL/OBJ/AMF/3MF without config, keep bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+msgid "Load Config from .ini/amf/3mf/gcode"
+msgstr "Load Config from .ini/amf/3mf/gcode"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 src/slic3r/GUI/Plater.cpp:605
+msgid "Export G-code"
+msgstr "Export G-code"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Save project (3MF)"
+msgstr "Save project (3MF)"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
+msgid "Load Config from .ini/amf/3mf/gcode and merge"
+msgstr "Load Config from .ini/amf/3mf/gcode and merge"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
+msgid "(Re)slice"
+msgstr "(Re)slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
+msgid "Quick slice"
+msgstr "Quick slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 src/slic3r/GUI/MainFrame.cpp:289
+msgid "Repeat last quick slice"
+msgstr "Repeat last quick slice"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
+msgid "Select Plater Tab"
+msgstr "Select Plater Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "Quick slice and Save as"
+msgstr "Quick slice and Save as"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
+msgid "Select Print Settings Tab"
+msgstr "Select Print Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+msgid "Select Filament Settings Tab"
+msgstr "Select Filament Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Select Printer Settings Tab"
+msgstr "Select Printer Settings Tab"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+msgid "Switch to 3D"
+msgstr "Switch to 3D"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
+msgid "Switch to Preview"
+msgstr "Switch to Preview"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117 src/slic3r/GUI/Preferences.cpp:10
+msgid "Preferences"
+msgstr "Preferences"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+#: src/slic3r/GUI/PrintHostDialogs.cpp:89
+msgid "Print host upload queue"
+msgstr "Print host upload queue"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Camera view "
+msgstr "Camera view "
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Add Instance to selected object "
+msgstr "Add Instance to selected object "
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Remove Instance from selected object"
+msgstr "Remove Instance from selected object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+msgid "Show keyboard shortcuts list"
+msgstr "Show keyboard shortcuts list"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
+msgid "Switch between 3D and Preview"
+msgstr "Switch between 3D and Preview"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Select multiple object/Move multiple object"
+msgstr "Select multiple object/Move multiple object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+msgid "Arrange"
+msgstr "Arrange"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+msgid "Select All objects"
+msgstr "Select All objects"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+msgid "Delete selected"
+msgstr "Delete selected"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Delete All"
+msgstr "Delete All"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+msgid "Gizmo move"
+msgstr "Gizmo move"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Gizmo scale"
+msgstr "Gizmo scale"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+msgid "Gizmo rotate"
+msgstr "Gizmo rotate"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+msgid "Gizmo cut"
+msgstr "Gizmo cut"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+msgid "Gizmo Place face on bed"
+msgstr "Gizmo Place face on bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+msgid "Gizmo SLA support points"
+msgstr "Gizmo SLA support points"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+msgid "Zoom to Bed"
+msgstr "Zoom to Bed"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+msgid "Zoom to all objects in scene, if none selected"
+msgstr "Zoom to all objects in scene, if none selected"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Zoom to selected object"
+msgstr "Zoom to selected object"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Zoom in"
+msgstr "Zoom in"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Zoom out"
+msgstr "Zoom out"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Unselect gizmo, keep object selection"
+msgstr "Unselect gizmo, keep object selection"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Plater Shortcuts"
+msgstr "Plater Shortcuts"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Arrow Up"
+msgstr "Arrow Up"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Upper Layer"
+msgstr "Upper Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Arrow Down"
+msgstr "Arrow Down"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Lower Layer"
+msgstr "Lower Layer"
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+msgid "Preview Shortcuts"
+msgstr "Preview Shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:53
+msgid ""
+" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
+msgstr ""
+" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
+
+#: src/slic3r/GUI/MainFrame.cpp:130
+msgid "Plater"
+msgstr "Plater"
+
+#: src/slic3r/GUI/MainFrame.cpp:236
+msgid "&Open"
+msgstr "&Open"
+
+#: src/slic3r/GUI/MainFrame.cpp:236
+msgid "Open a project file"
+msgstr "Open a project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:238
+msgid "&Save"
+msgstr "&Save"
+
+#: src/slic3r/GUI/MainFrame.cpp:238
+msgid "Save current project file"
+msgstr "Save current project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:240
+msgid "Save &as"
+msgstr "Save &as"
+
+#: src/slic3r/GUI/MainFrame.cpp:240
+msgid "Save current project file as"
+msgstr "Save current project file as"
+
+#: src/slic3r/GUI/MainFrame.cpp:246
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr "Import STL/OBJ/AM&F/3MF"
+
+#: src/slic3r/GUI/MainFrame.cpp:246
+msgid "Load a model"
+msgstr "Load a model"
+
+#: src/slic3r/GUI/MainFrame.cpp:249
+msgid "Import &Config"
+msgstr "Import &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:249
+msgid "Load exported configuration file"
+msgstr "Load exported configuration file"
+
+#: src/slic3r/GUI/MainFrame.cpp:251
+msgid "Import Config from &project"
+msgstr "Import Config from &project"
+
+#: src/slic3r/GUI/MainFrame.cpp:251
+msgid "Load configuration from project file"
+msgstr "Load configuration from project file"
+
+#: src/slic3r/GUI/MainFrame.cpp:254
+msgid "Import Config &Bundle"
+msgstr "Import Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:254
+msgid "Load presets from a bundle"
+msgstr "Load presets from a bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:256
+msgid "&Import"
+msgstr "&Import"
+
+#: src/slic3r/GUI/MainFrame.cpp:259
+msgid "Export &G-code"
+msgstr "Export &G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:259
+msgid "Export current plate as G-code"
+msgstr "Export current plate as G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:262
+msgid "Export plate as &STL"
+msgstr "Export plate as &STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:262
+msgid "Export current plate as STL"
+msgstr "Export current plate as STL"
+
+#: src/slic3r/GUI/MainFrame.cpp:264
+msgid "Export plate as &AMF"
+msgstr "Export plate as &AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:264
+msgid "Export current plate as AMF"
+msgstr "Export current plate as AMF"
+
+#: src/slic3r/GUI/MainFrame.cpp:267
+msgid "Export &Config"
+msgstr "Export &Config"
+
+#: src/slic3r/GUI/MainFrame.cpp:267
+msgid "Export current configuration to file"
+msgstr "Export current configuration to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:269
+msgid "Export Config &Bundle"
+msgstr "Export Config &Bundle"
+
+#: src/slic3r/GUI/MainFrame.cpp:269
+msgid "Export all presets to file"
+msgstr "Export all presets to file"
+
+#: src/slic3r/GUI/MainFrame.cpp:271
+msgid "&Export"
+msgstr "&Export"
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Quick Slice"
+msgstr "Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:277
+msgid "Slice a file into a G-code"
+msgstr "Slice a file into a G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Quick Slice and Save As"
+msgstr "Quick Slice and Save As"
+
+#: src/slic3r/GUI/MainFrame.cpp:283
+msgid "Slice a file into a G-code, save as"
+msgstr "Slice a file into a G-code, save as"
+
+#: src/slic3r/GUI/MainFrame.cpp:289
+msgid "Repeat Last Quick Slice"
+msgstr "Repeat Last Quick Slice"
+
+#: src/slic3r/GUI/MainFrame.cpp:297
+msgid "(Re)Slice &Now"
+msgstr "(Re)Slice &Now"
+
+#: src/slic3r/GUI/MainFrame.cpp:297
+msgid "Start new slicing process"
+msgstr "Start new slicing process"
+
+#: src/slic3r/GUI/MainFrame.cpp:300
+msgid "&Repair STL file"
+msgstr "&Repair STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:300
+msgid "Automatically repair an STL file"
+msgstr "Automatically repair an STL file"
+
+#: src/slic3r/GUI/MainFrame.cpp:303
+msgid "&Quit"
+msgstr "&Quit"
+
+#: src/slic3r/GUI/MainFrame.cpp:303
+msgid "Quit Slic3r"
+msgstr "Quit Slic3r"
+
+#: src/slic3r/GUI/MainFrame.cpp:321
+msgid "&Select all"
+msgstr "&Select all"
+
+#: src/slic3r/GUI/MainFrame.cpp:321
+msgid "Selects all objects"
+msgstr "Selects all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:324
+msgid "&Delete selected"
+msgstr "&Delete selected"
+
+#: src/slic3r/GUI/MainFrame.cpp:324
+msgid "Deletes the current selection"
+msgstr "Deletes the current selection"
+
+#: src/slic3r/GUI/MainFrame.cpp:326
+msgid "Delete &all"
+msgstr "Delete &all"
+
+#: src/slic3r/GUI/MainFrame.cpp:326
+msgid "Deletes all objects"
+msgstr "Deletes all objects"
+
+#: src/slic3r/GUI/MainFrame.cpp:339
+msgid "&Plater Tab"
+msgstr "&Plater Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:339
+msgid "Show the plater"
+msgstr "Show the plater"
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "P&rint Settings Tab"
+msgstr "P&rint Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "Show the print settings"
+msgstr "Show the print settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "&Filament Settings Tab"
+msgstr "&Filament Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "Show the filament settings"
+msgstr "Show the filament settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:350
+msgid "Print&er Settings Tab"
+msgstr "Print&er Settings Tab"
+
+#: src/slic3r/GUI/MainFrame.cpp:350
+msgid "Show the printer settings"
+msgstr "Show the printer settings"
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "3&D"
+msgstr "3&D"
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "Show the 3D editing view"
+msgstr "Show the 3D editing view"
+
+#: src/slic3r/GUI/MainFrame.cpp:356
+msgid "Pre&view"
+msgstr "Pre&view"
+
+#: src/slic3r/GUI/MainFrame.cpp:356
+msgid "Show the 3D slices preview"
+msgstr "Show the 3D slices preview"
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "Print &Host Upload Queue"
+msgstr "Print &Host Upload Queue"
+
+#: src/slic3r/GUI/MainFrame.cpp:377
+msgid "Display the Print Host Upload Queue window"
+msgstr "Display the Print Host Upload Queue window"
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "&Iso"
+msgstr "&Iso"
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "Iso View"
+msgstr "Iso View"
+
+#: src/slic3r/GUI/MainFrame.cpp:390
+msgid "&Top"
+msgstr "&Top"
+
+#: src/slic3r/GUI/MainFrame.cpp:390
+msgid "Top View"
+msgstr "Top View"
+
+#: src/slic3r/GUI/MainFrame.cpp:391
+msgid "&Bottom"
+msgstr "&Bottom"
+
+#: src/slic3r/GUI/MainFrame.cpp:391
+msgid "Bottom View"
+msgstr "Bottom View"
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "&Front"
+msgstr "&Front"
+
+#: src/slic3r/GUI/MainFrame.cpp:392
+msgid "Front View"
+msgstr "Front View"
+
+#: src/slic3r/GUI/MainFrame.cpp:393
+msgid "R&ear"
+msgstr "R&ear"
+
+#: src/slic3r/GUI/MainFrame.cpp:393
+msgid "Rear View"
+msgstr "Rear View"
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "&Left"
+msgstr "&Left"
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "Left View"
+msgstr "Left View"
+
+#: src/slic3r/GUI/MainFrame.cpp:395
+msgid "&Right"
+msgstr "&Right"
+
+#: src/slic3r/GUI/MainFrame.cpp:395
+msgid "Right View"
+msgstr "Right View"
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Prusa 3D &Drivers"
+msgstr "Prusa 3D &Drivers"
+
+#: src/slic3r/GUI/MainFrame.cpp:409
+msgid "Open the Prusa3D drivers download page in your browser"
+msgstr "Open the Prusa3D drivers download page in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "Prusa Edition &Releases"
+msgstr "Prusa Edition &Releases"
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "Open the Prusa Edition releases page in your browser"
+msgstr "Open the Prusa Edition releases page in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:417
+msgid "Slic3r &Website"
+msgstr "Slic3r &Website"
+
+#: src/slic3r/GUI/MainFrame.cpp:417
+msgid "Open the Slic3r website in your browser"
+msgstr "Open the Slic3r website in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:419
+msgid "Slic3r &Manual"
+msgstr "Slic3r &Manual"
+
+#: src/slic3r/GUI/MainFrame.cpp:419
+msgid "Open the Slic3r manual in your browser"
+msgstr "Open the Slic3r manual in your browser"
+
+#: src/slic3r/GUI/MainFrame.cpp:422
+msgid "System &Info"
+msgstr "System &Info"
+
+#: src/slic3r/GUI/MainFrame.cpp:422
+msgid "Show system information"
+msgstr "Show system information"
+
+#: src/slic3r/GUI/MainFrame.cpp:424
+msgid "Show &Configuration Folder"
+msgstr "Show &Configuration Folder"
+
+#: src/slic3r/GUI/MainFrame.cpp:424
+msgid "Show user configuration folder (datadir)"
+msgstr "Show user configuration folder (datadir)"
+
+#: src/slic3r/GUI/MainFrame.cpp:426
+msgid "Report an I&ssue"
+msgstr "Report an I&ssue"
+
+#: src/slic3r/GUI/MainFrame.cpp:426
+msgid "Report an issue on the Slic3r Prusa Edition"
+msgstr "Report an issue on the Slic3r Prusa Edition"
+
+#: src/slic3r/GUI/MainFrame.cpp:428
+msgid "&About Slic3r"
+msgstr "&About Slic3r"
+
+#: src/slic3r/GUI/MainFrame.cpp:428
+msgid "Show about dialog"
+msgstr "Show about dialog"
+
+#: src/slic3r/GUI/MainFrame.cpp:431
+msgid "&Keyboard Shortcuts"
+msgstr "&Keyboard Shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:431
+msgid "Show the list of the keyboard shortcuts"
+msgstr "Show the list of the keyboard shortcuts"
+
+#: src/slic3r/GUI/MainFrame.cpp:439
+msgid "&File"
+msgstr "&File"
+
+#: src/slic3r/GUI/MainFrame.cpp:440
+msgid "&Edit"
+msgstr "&Edit"
+
+#: src/slic3r/GUI/MainFrame.cpp:441
+msgid "&Window"
+msgstr "&Window"
+
+#: src/slic3r/GUI/MainFrame.cpp:442
+msgid "&View"
+msgstr "&View"
+
+#: src/slic3r/GUI/MainFrame.cpp:445
+msgid "&Help"
+msgstr "&Help"
+
+#: src/slic3r/GUI/MainFrame.cpp:472
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+
+#: src/slic3r/GUI/MainFrame.cpp:486
+msgid "No previously sliced file."
+msgstr "No previously sliced file."
+
+#: src/slic3r/GUI/MainFrame.cpp:487 src/slic3r/GUI/PrintHostDialogs.cpp:173
+msgid "Error"
+msgstr "Error"
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid "Previously sliced file ("
+msgstr "Previously sliced file ("
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid ") not found."
+msgstr ") not found."
+
+#: src/slic3r/GUI/MainFrame.cpp:493
+msgid "File Not Found"
+msgstr "File Not Found"
+
+#: src/slic3r/GUI/MainFrame.cpp:531 src/slic3r/GUI/Tab.cpp:3031
+msgid "Save "
+msgstr "Save "
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid "SVG"
+msgstr "SVG"
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid "G-code"
+msgstr "G-code"
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid " file as:"
+msgstr " file as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:548
+msgid "Save zip file as:"
+msgstr "Save zip file as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:560
+msgid "Slicing"
+msgstr "Slicing"
+
+#: src/slic3r/GUI/MainFrame.cpp:560
+msgid "Processing "
+msgstr "Processing "
+
+#: src/slic3r/GUI/MainFrame.cpp:583
+msgid " was successfully sliced."
+msgstr " was successfully sliced."
+
+#: src/slic3r/GUI/MainFrame.cpp:585
+msgid "Slicing Done!"
+msgstr "Slicing Done!"
+
+#: src/slic3r/GUI/MainFrame.cpp:600
+msgid "Select the STL file to repair:"
+msgstr "Select the STL file to repair:"
+
+#: src/slic3r/GUI/MainFrame.cpp:614
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr "Save OBJ file (less prone to coordinate errors than STL) as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:629
+msgid "Your file was repaired."
+msgstr "Your file was repaired."
+
+#: src/slic3r/GUI/MainFrame.cpp:629
+msgid "Repair"
+msgstr "Repair"
+
+#: src/slic3r/GUI/MainFrame.cpp:643
+msgid "Save configuration as:"
+msgstr "Save configuration as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:663 src/slic3r/GUI/MainFrame.cpp:727
+msgid "Select configuration to load:"
+msgstr "Select configuration to load:"
+
+#: src/slic3r/GUI/MainFrame.cpp:700
+msgid "Save presets bundle as:"
+msgstr "Save presets bundle as:"
+
+#: src/slic3r/GUI/MainFrame.cpp:751
+#, c-format
+msgid "%d presets successfully imported."
+msgstr "%d presets successfully imported."
+
+#: src/slic3r/GUI/MsgDialog.cpp:66
+msgid "Slic3r error"
+msgstr "Slic3r error"
+
+#: src/slic3r/GUI/MsgDialog.cpp:66
+msgid "Slic3r has encountered an error"
+msgstr "Slic3r has encountered an error"
+
+#: src/slic3r/GUI/MsgDialog.cpp:84
+msgid "Copy to clipboard"
+msgstr "Copy to clipboard"
+
+#: src/slic3r/GUI/Plater.cpp:107
+msgid "Info"
+msgstr "Info"
+
+#: src/slic3r/GUI/Plater.cpp:126
+msgid "Volume"
+msgstr "Volume"
+
+#: src/slic3r/GUI/Plater.cpp:127
+msgid "Facets"
+msgstr "Facets"
+
+#: src/slic3r/GUI/Plater.cpp:128
+msgid "Materials"
+msgstr "Materials"
+
+#: src/slic3r/GUI/Plater.cpp:131
+msgid "Manifold"
+msgstr "Manifold"
+
+#: src/slic3r/GUI/Plater.cpp:174
+msgid "Sliced Info"
+msgstr "Sliced Info"
+
+#: src/slic3r/GUI/Plater.cpp:193 src/slic3r/GUI/Plater.cpp:823
+msgid "Used Filament (m)"
+msgstr "Used Filament (m)"
+
+#: src/slic3r/GUI/Plater.cpp:194
+msgid "Used Filament (mm³)"
+msgstr "Used Filament (mm³)"
+
+#: src/slic3r/GUI/Plater.cpp:195
+msgid "Used Filament (g)"
+msgstr "Used Filament (g)"
+
+#: src/slic3r/GUI/Plater.cpp:196 src/slic3r/GUI/Plater.cpp:838
+#: src/libslic3r/PrintConfig.cpp:718
+msgid "Cost"
+msgstr "Cost"
+
+#: src/slic3r/GUI/Plater.cpp:197 src/slic3r/GUI/Plater.cpp:852
+msgid "Estimated printing time"
+msgstr "Estimated printing time"
+
+#: src/slic3r/GUI/Plater.cpp:198
+msgid "Number of tool changes"
+msgstr "Number of tool changes"
+
+#: src/slic3r/GUI/Plater.cpp:361
+msgid "Support"
+msgstr "Support"
+
+#: src/slic3r/GUI/Plater.cpp:364
+msgid "Select what kind of support do you need"
+msgstr "Select what kind of support do you need"
+
+#: src/slic3r/GUI/Plater.cpp:365 src/libslic3r/GCode/PreviewData.cpp:162
+msgid "None"
+msgstr "None"
+
+#: src/slic3r/GUI/Plater.cpp:366 src/libslic3r/PrintConfig.cpp:1904
+msgid "Support on build plate only"
+msgstr "Support on build plate only"
+
+#: src/slic3r/GUI/Plater.cpp:367
+msgid "Everywhere"
+msgstr "Everywhere"
+
+#: src/slic3r/GUI/Plater.cpp:379 src/slic3r/GUI/Tab.cpp:977
+msgid "Brim"
+msgstr "Brim"
+
+#: src/slic3r/GUI/Plater.cpp:381
+msgid ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+
+#: src/slic3r/GUI/Plater.cpp:390
+msgid "Purging volumes"
+msgstr "Purging volumes"
+
+#: src/slic3r/GUI/Plater.cpp:556
+msgid "Print settings"
+msgstr "Print settings"
+
+#: src/slic3r/GUI/Plater.cpp:557 src/slic3r/GUI/Tab.cpp:1380
+#: src/slic3r/GUI/Tab.cpp:1381
+msgid "Filament"
+msgstr "Filament"
+
+#: src/slic3r/GUI/Plater.cpp:558 src/slic3r/GUI/Preset.cpp:1158
+msgid "SLA print"
+msgstr "SLA print"
+
+#: src/slic3r/GUI/Plater.cpp:559 src/slic3r/GUI/Preset.cpp:1159
+msgid "SLA material"
+msgstr "SLA material"
+
+#: src/slic3r/GUI/Plater.cpp:560
+msgid "Printer"
+msgstr "Printer"
+
+#: src/slic3r/GUI/Plater.cpp:588
+msgid "Send to printer"
+msgstr "Send to printer"
+
+#: src/slic3r/GUI/Plater.cpp:607
+msgid "Slice now"
+msgstr "Slice now"
+
+#: src/slic3r/GUI/Plater.cpp:787
+#, c-format
+msgid "%d (%d shells)"
+msgstr "%d (%d shells)"
+
+#: src/slic3r/GUI/Plater.cpp:792
+#, c-format
+msgid "Auto-repaired (%d errors)"
+msgstr "Auto-repaired (%d errors)"
+
+#: src/slic3r/GUI/Plater.cpp:795
+#, c-format
+msgid ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+msgstr ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+
+#: src/slic3r/GUI/Plater.cpp:805
+msgid "Yes"
+msgstr "Yes"
+
+#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
+msgid "objects"
+msgstr "objects"
+
+#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Plater.cpp:840
+msgid "wipe tower"
+msgstr "wipe tower"
+
+#: src/slic3r/GUI/Plater.cpp:855
+msgid "normal mode"
+msgstr "normal mode"
+
+#: src/slic3r/GUI/Plater.cpp:859
+msgid "silent mode"
+msgstr "silent mode"
+
+#: src/slic3r/GUI/Plater.cpp:1304
+msgid "Loading"
+msgstr "Loading"
+
+#: src/slic3r/GUI/Plater.cpp:1314
+#, c-format
+msgid "Processing input file %s\n"
+msgstr "Processing input file %s\n"
+
+#: src/slic3r/GUI/Plater.cpp:1366
+msgid ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+msgstr ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+
+#: src/slic3r/GUI/Plater.cpp:1369 src/slic3r/GUI/Plater.cpp:1411
+msgid "Multi-part object detected"
+msgstr "Multi-part object detected"
+
+#: src/slic3r/GUI/Plater.cpp:1388
+#, c-format
+msgid ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+msgstr ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+
+#: src/slic3r/GUI/Plater.cpp:1408
+msgid ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+msgstr ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+
+#: src/slic3r/GUI/Plater.cpp:1424
+msgid "Loaded"
+msgstr "Loaded"
+
+#: src/slic3r/GUI/Plater.cpp:1492
+msgid ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+msgstr ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+
+#: src/slic3r/GUI/Plater.cpp:1493
+msgid "Object too large?"
+msgstr "Object too large?"
+
+#: src/slic3r/GUI/Plater.cpp:1536
+msgid "Export print config"
+msgstr "Export print config"
+
+#: src/slic3r/GUI/Plater.cpp:1538
+msgid "Save file as:"
+msgstr "Save file as:"
+
+#: src/slic3r/GUI/Plater.cpp:1702
+msgid "Arranging canceled"
+msgstr "Arranging canceled"
+
+#: src/slic3r/GUI/Plater.cpp:1705
+msgid "Arranging"
+msgstr "Arranging"
+
+#: src/slic3r/GUI/Plater.cpp:1736
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr "Could not arrange model objects! Some geometries may be invalid."
+
+#: src/slic3r/GUI/Plater.cpp:1740
+msgid "Arranging done."
+msgstr "Arranging done."
+
+#: src/slic3r/GUI/Plater.cpp:1782
+msgid "Orientation search canceled"
+msgstr "Orientation search canceled"
+
+#: src/slic3r/GUI/Plater.cpp:1787
+msgid "Searching for optimal orientation"
+msgstr "Searching for optimal orientation"
+
+#: src/slic3r/GUI/Plater.cpp:1797
+msgid "Orientation found."
+msgstr "Orientation found."
+
+#: src/slic3r/GUI/Plater.cpp:1818
+msgid ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+msgstr ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+
+#: src/slic3r/GUI/Plater.cpp:1945 src/slic3r/GUI/PrintHostDialogs.cpp:174
+msgid "Cancelling"
+msgstr "Cancelling"
+
+#: src/slic3r/GUI/Plater.cpp:1962
+msgid "Another export job is currently running."
+msgstr "Another export job is currently running."
+
+#: src/slic3r/GUI/Plater.cpp:2215
+msgid "Export failed"
+msgstr "Export failed"
+
+#: src/slic3r/GUI/Plater.cpp:2219 src/slic3r/GUI/PrintHostDialogs.cpp:175
+msgid "Cancelled"
+msgstr "Cancelled"
+
+#: src/slic3r/GUI/Plater.cpp:2346 src/slic3r/GUI/Tab.cpp:2736
+msgid "Delete"
+msgstr "Delete"
+
+#: src/slic3r/GUI/Plater.cpp:2346
+msgid "Remove the selected object"
+msgstr "Remove the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2349
+msgid "Increase copies"
+msgstr "Increase copies"
+
+#: src/slic3r/GUI/Plater.cpp:2349
+msgid "Place one more copy of the selected object"
+msgstr "Place one more copy of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2351
+msgid "Decrease copies"
+msgstr "Decrease copies"
+
+#: src/slic3r/GUI/Plater.cpp:2351
+msgid "Remove one copy of the selected object"
+msgstr "Remove one copy of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2353
+msgid "Set number of copies"
+msgstr "Set number of copies"
+
+#: src/slic3r/GUI/Plater.cpp:2353
+msgid "Change the number of copies of the selected object"
+msgstr "Change the number of copies of the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2363
+msgid "Reload from Disk"
+msgstr "Reload from Disk"
+
+#: src/slic3r/GUI/Plater.cpp:2363
+msgid "Reload the selected file from Disk"
+msgstr "Reload the selected file from Disk"
+
+#: src/slic3r/GUI/Plater.cpp:2366
+msgid "Export object as STL"
+msgstr "Export object as STL"
+
+#: src/slic3r/GUI/Plater.cpp:2366
+msgid "Export this single object as STL file"
+msgstr "Export this single object as STL file"
+
+#: src/slic3r/GUI/Plater.cpp:2375
+msgid "Along X axis"
+msgstr "Along X axis"
+
+#: src/slic3r/GUI/Plater.cpp:2375
+msgid "Mirror the selected object along the X axis"
+msgstr "Mirror the selected object along the X axis"
+
+#: src/slic3r/GUI/Plater.cpp:2377
+msgid "Along Y axis"
+msgstr "Along Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:2377
+msgid "Mirror the selected object along the Y axis"
+msgstr "Mirror the selected object along the Y axis"
+
+#: src/slic3r/GUI/Plater.cpp:2379
+msgid "Along Z axis"
+msgstr "Along Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:2379
+msgid "Mirror the selected object along the Z axis"
+msgstr "Mirror the selected object along the Z axis"
+
+#: src/slic3r/GUI/Plater.cpp:2382
+msgid "Mirror"
+msgstr "Mirror"
+
+#: src/slic3r/GUI/Plater.cpp:2382
+msgid "Mirror the selected object"
+msgstr "Mirror the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2400
+msgid "To objects"
+msgstr "To objects"
+
+#: src/slic3r/GUI/Plater.cpp:2400 src/slic3r/GUI/Plater.cpp:2431
+msgid "Split the selected object into individual objects"
+msgstr "Split the selected object into individual objects"
+
+#: src/slic3r/GUI/Plater.cpp:2402
+msgid "To parts"
+msgstr "To parts"
+
+#: src/slic3r/GUI/Plater.cpp:2402 src/slic3r/GUI/Plater.cpp:2451
+msgid "Split the selected object into individual sub-parts"
+msgstr "Split the selected object into individual sub-parts"
+
+#: src/slic3r/GUI/Plater.cpp:2405 src/slic3r/GUI/Plater.cpp:2431
+#: src/slic3r/GUI/Plater.cpp:2451
+msgid "Split"
+msgstr "Split"
+
+#: src/slic3r/GUI/Plater.cpp:2405
+msgid "Split the selected object"
+msgstr "Split the selected object"
+
+#: src/slic3r/GUI/Plater.cpp:2435
+msgid "Optimize orientation"
+msgstr "Optimize orientation"
+
+#: src/slic3r/GUI/Plater.cpp:2435
+msgid "Optimize the rotation of the object for better print results."
+msgstr "Optimize the rotation of the object for better print results."
+
+#: src/slic3r/GUI/Plater.cpp:2795
+msgid "Save G-code file as:"
+msgstr "Save G-code file as:"
+
+#: src/slic3r/GUI/Plater.cpp:2795
+msgid "Save Zip file as:"
+msgstr "Save Zip file as:"
+
+#: src/slic3r/GUI/Plater.cpp:2845
+#, c-format
+msgid "STL file exported to %s"
+msgstr "STL file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:2861
+#, c-format
+msgid "AMF file exported to %s"
+msgstr "AMF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:2864
+#, c-format
+msgid "Error exporting AMF file %s"
+msgstr "Error exporting AMF file %s"
+
+#: src/slic3r/GUI/Plater.cpp:2891
+#, c-format
+msgid "3MF file exported to %s"
+msgstr "3MF file exported to %s"
+
+#: src/slic3r/GUI/Plater.cpp:2894
+#, c-format
+msgid "Error exporting 3MF file %s"
+msgstr "Error exporting 3MF file %s"
+
+#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1712
+#: src/slic3r/GUI/Tab.cpp:1911
+msgid "General"
+msgstr "General"
+
+#: src/slic3r/GUI/Preferences.cpp:34
+msgid "Remember output directory"
+msgstr "Remember output directory"
+
+#: src/slic3r/GUI/Preferences.cpp:36
+msgid ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+msgstr ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+
+#: src/slic3r/GUI/Preferences.cpp:42
+msgid "Auto-center parts"
+msgstr "Auto-center parts"
+
+#: src/slic3r/GUI/Preferences.cpp:44
+msgid ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+msgstr ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+
+#: src/slic3r/GUI/Preferences.cpp:50
+msgid "Background processing"
+msgstr "Background processing"
+
+#: src/slic3r/GUI/Preferences.cpp:52
+msgid ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+msgstr ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+
+#: src/slic3r/GUI/Preferences.cpp:74
+msgid "Suppress \" - default - \" presets"
+msgstr "Suppress \" - default - \" presets"
+
+#: src/slic3r/GUI/Preferences.cpp:76
+msgid ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+msgstr ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+
+#: src/slic3r/GUI/Preferences.cpp:82
+msgid "Show incompatible print and filament presets"
+msgstr "Show incompatible print and filament presets"
+
+#: src/slic3r/GUI/Preferences.cpp:84
+msgid ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+msgstr ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+
+#: src/slic3r/GUI/Preferences.cpp:90
+msgid "Use legacy OpenGL 1.1 rendering"
+msgstr "Use legacy OpenGL 1.1 rendering"
+
+#: src/slic3r/GUI/Preferences.cpp:92
+msgid ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+msgstr ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+
+#: src/slic3r/GUI/Preferences.cpp:115
+msgid "You need to restart Slic3r to make the changes effective."
+msgstr "You need to restart Slic3r to make the changes effective."
+
+#: src/slic3r/GUI/Preset.cpp:170
+msgid "modified"
+msgstr "modified"
+
+#: src/slic3r/GUI/Preset.cpp:862 src/slic3r/GUI/Preset.cpp:902
+#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:962
+#: src/slic3r/GUI/PresetBundle.cpp:1459 src/slic3r/GUI/PresetBundle.cpp:1512
+msgid "System presets"
+msgstr "System presets"
+
+#: src/slic3r/GUI/Preset.cpp:906 src/slic3r/GUI/Preset.cpp:966
+#: src/slic3r/GUI/PresetBundle.cpp:1517
+msgid "User presets"
+msgstr "User presets"
+
+#: src/slic3r/GUI/Preset.cpp:1157
+msgid "filament"
+msgstr "filament"
+
+#: src/slic3r/GUI/PresetHints.cpp:28
+#, c-format
+msgid ""
+"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
+"will be reduced so that no less than %ds are spent on that layer (however, "
+"speed will never be reduced below %dmm/s)."
+msgstr ""
+"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
+"will be reduced so that no less than %ds are spent on that layer (however, "
+"speed will never be reduced below %dmm/s)."
+
+#: src/slic3r/GUI/PresetHints.cpp:32
+#, c-format
+msgid ""
+"\n"
+"If estimated layer time is greater, but still below ~%ds, fan will run at a "
+"proportionally decreasing speed between %d%% and %d%%."
+msgstr ""
+"\n"
+"If estimated layer time is greater, but still below ~%ds, fan will run at a "
+"proportionally decreasing speed between %d%% and %d%%."
+
+#: src/slic3r/GUI/PresetHints.cpp:36
+msgid ""
+"\n"
+"During the other layers, fan "
+msgstr ""
+"\n"
+"During the other layers, fan "
+
+#: src/slic3r/GUI/PresetHints.cpp:38
+msgid "Fan "
+msgstr "Fan "
+
+#: src/slic3r/GUI/PresetHints.cpp:43
+#, c-format
+msgid "will always run at %d%% "
+msgstr "will always run at %d%% "
+
+#: src/slic3r/GUI/PresetHints.cpp:46
+#, c-format
+msgid "except for the first %d layers"
+msgstr "except for the first %d layers"
+
+#: src/slic3r/GUI/PresetHints.cpp:50
+msgid "except for the first layer"
+msgstr "except for the first layer"
+
+#: src/slic3r/GUI/PresetHints.cpp:52
+msgid "will be turned off."
+msgstr "will be turned off."
+
+#: src/slic3r/GUI/PresetHints.cpp:153
+msgid "external perimeters"
+msgstr "external perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:162
+msgid "perimeters"
+msgstr "perimeters"
+
+#: src/slic3r/GUI/PresetHints.cpp:171
+msgid "infill"
+msgstr "infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:181
+msgid "solid infill"
+msgstr "solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:189
+msgid "top solid infill"
+msgstr "top solid infill"
+
+#: src/slic3r/GUI/PresetHints.cpp:200
+msgid "support"
+msgstr "support"
+
+#: src/slic3r/GUI/PresetHints.cpp:210
+msgid "support interface"
+msgstr "support interface"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "First layer volumetric"
+msgstr "First layer volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Bridging volumetric"
+msgstr "Bridging volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:216
+msgid "Volumetric"
+msgstr "Volumetric"
+
+#: src/slic3r/GUI/PresetHints.cpp:217
+msgid " flow rate is maximized "
+msgstr " flow rate is maximized "
+
+#: src/slic3r/GUI/PresetHints.cpp:220
+msgid "by the print profile maximum"
+msgstr "by the print profile maximum"
+
+#: src/slic3r/GUI/PresetHints.cpp:221
+msgid "when printing "
+msgstr "when printing "
+
+#: src/slic3r/GUI/PresetHints.cpp:222
+msgid " with a volumetric rate "
+msgstr " with a volumetric rate "
+
+#: src/slic3r/GUI/PresetHints.cpp:226
+#, c-format
+msgid "%3.2f mm³/s"
+msgstr "%3.2f mm³/s"
+
+#: src/slic3r/GUI/PresetHints.cpp:228
+#, c-format
+msgid " at filament speed %3.2f mm/s."
+msgstr " at filament speed %3.2f mm/s."
+
+#: src/slic3r/GUI/PresetHints.cpp:247
+msgid ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+msgstr ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+
+#: src/slic3r/GUI/PresetHints.cpp:264
+#, c-format
+msgid "Recommended object thin wall thickness for layer height %.2f and "
+msgstr "Recommended object thin wall thickness for layer height %.2f and "
+
+#: src/slic3r/GUI/PresetHints.cpp:271
+#, c-format
+msgid "%d lines: %.2lf mm"
+msgstr "%d lines: %.2lf mm"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:29
+msgid "Send G-Code to printer host"
+msgstr "Send G-Code to printer host"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:29
+msgid "Upload to Printer Host with the following filename:"
+msgstr "Upload to Printer Host with the following filename:"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:31
+msgid "Start printing after upload"
+msgstr "Start printing after upload"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:33
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr "Use forward slashes ( / ) as a directory separator if needed."
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:111
+msgid "Cancel selected"
+msgstr "Cancel selected"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:113
+msgid "Show error message"
+msgstr "Show error message"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:115
+msgid "Close"
+msgstr "Close"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:152
+#: src/slic3r/GUI/PrintHostDialogs.cpp:171
+msgid "Enqueued"
+msgstr "Enqueued"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:172
+msgid "Uploading"
+msgstr "Uploading"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
+msgid "Completed"
+msgstr "Completed"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:214
+msgid "Error uploading to print host:"
+msgstr "Error uploading to print host:"
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+msgstr "NO RAMMING AT ALL"
+
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr "Time"
+
+#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
+#: src/slic3r/GUI/WipeTowerDialog.cpp:78 src/libslic3r/PrintConfig.cpp:603
+#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:670
+#: src/libslic3r/PrintConfig.cpp:2352 src/libslic3r/PrintConfig.cpp:2360
+#: src/libslic3r/PrintConfig.cpp:2432 src/libslic3r/PrintConfig.cpp:2440
+msgid "s"
+msgstr "s"
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+msgstr "Volumetric speed"
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:40
+msgid "Slic3r Prusa Edition - System Information"
+msgstr "Slic3r Prusa Edition - System Information"
+
+#: src/slic3r/GUI/Tab.cpp:49 src/libslic3r/PrintConfig.cpp:202
+msgid "Compatible printers"
+msgstr "Compatible printers"
+
+#: src/slic3r/GUI/Tab.cpp:50
+msgid "Select the printers this profile is compatible with."
+msgstr "Select the printers this profile is compatible with."
+
+#: src/slic3r/GUI/Tab.cpp:55 src/libslic3r/PrintConfig.cpp:215
+msgid "Compatible print profiles"
+msgstr "Compatible print profiles"
+
+#: src/slic3r/GUI/Tab.cpp:56
+msgid "Select the print profiles this profile is compatible with."
+msgstr "Select the print profiles this profile is compatible with."
+
+#: src/slic3r/GUI/Tab.cpp:118
+msgid "Save current "
+msgstr "Save current "
+
+#: src/slic3r/GUI/Tab.cpp:119
+msgid "Delete this preset"
+msgstr "Delete this preset"
+
+#: src/slic3r/GUI/Tab.cpp:131
+msgid ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+msgstr ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+
+#: src/slic3r/GUI/Tab.cpp:824
+msgid "It's a default preset."
+msgstr "It's a default preset."
+
+#: src/slic3r/GUI/Tab.cpp:825
+msgid "It's a system preset."
+msgstr "It's a system preset."
+
+#: src/slic3r/GUI/Tab.cpp:826
+msgid "Current preset is inherited from "
+msgstr "Current preset is inherited from "
+
+#: src/slic3r/GUI/Tab.cpp:831
+msgid "It can't be deleted or modified. "
+msgstr "It can't be deleted or modified. "
+
+#: src/slic3r/GUI/Tab.cpp:832
+msgid ""
+"Any modifications should be saved as a new preset inherited from this one. "
+msgstr ""
+"Any modifications should be saved as a new preset inherited from this one. "
+
+#: src/slic3r/GUI/Tab.cpp:833
+msgid "To do that please specify a new name for the preset."
+msgstr "To do that please specify a new name for the preset."
+
+#: src/slic3r/GUI/Tab.cpp:837
+msgid "Additional information:"
+msgstr "Additional information:"
+
+#: src/slic3r/GUI/Tab.cpp:843
+msgid "printer model"
+msgstr "printer model"
+
+#: src/slic3r/GUI/Tab.cpp:851
+msgid "default print profile"
+msgstr "default print profile"
+
+#: src/slic3r/GUI/Tab.cpp:854
+msgid "default filament profile"
+msgstr "default filament profile"
+
+#: src/slic3r/GUI/Tab.cpp:868
+msgid "default SLA material profile"
+msgstr "default SLA material profile"
+
+#: src/slic3r/GUI/Tab.cpp:872
+msgid "default SLA print profile"
+msgstr "default SLA print profile"
+
+#: src/slic3r/GUI/Tab.cpp:919 src/slic3r/GUI/Tab.cpp:3174
+msgid "Layers and perimeters"
+msgstr "Layers and perimeters"
+
+#: src/slic3r/GUI/Tab.cpp:920 src/libslic3r/PrintConfig.cpp:46
+msgid "Layer height"
+msgstr "Layer height"
+
+#: src/slic3r/GUI/Tab.cpp:924
+msgid "Vertical shells"
+msgstr "Vertical shells"
+
+#: src/slic3r/GUI/Tab.cpp:935
+msgid "Horizontal shells"
+msgstr "Horizontal shells"
+
+#: src/slic3r/GUI/Tab.cpp:936 src/libslic3r/PrintConfig.cpp:1788
+msgid "Solid layers"
+msgstr "Solid layers"
+
+#: src/slic3r/GUI/Tab.cpp:941
+msgid "Quality (slower slicing)"
+msgstr "Quality (slower slicing)"
+
+#: src/slic3r/GUI/Tab.cpp:958
+msgid "Reducing printing time"
+msgstr "Reducing printing time"
+
+#: src/slic3r/GUI/Tab.cpp:970
+msgid "Skirt and brim"
+msgstr "Skirt and brim"
+
+#: src/slic3r/GUI/Tab.cpp:987
+msgid "Raft"
+msgstr "Raft"
+
+#: src/slic3r/GUI/Tab.cpp:991
+msgid "Options for support material and raft"
+msgstr "Options for support material and raft"
+
+#: src/slic3r/GUI/Tab.cpp:1006
+msgid "Speed for print moves"
+msgstr "Speed for print moves"
+
+#: src/slic3r/GUI/Tab.cpp:1018
+msgid "Speed for non-print moves"
+msgstr "Speed for non-print moves"
+
+#: src/slic3r/GUI/Tab.cpp:1021
+msgid "Modifiers"
+msgstr "Modifiers"
+
+#: src/slic3r/GUI/Tab.cpp:1024
+msgid "Acceleration control (advanced)"
+msgstr "Acceleration control (advanced)"
+
+#: src/slic3r/GUI/Tab.cpp:1031
+msgid "Autospeed (advanced)"
+msgstr "Autospeed (advanced)"
+
+#: src/slic3r/GUI/Tab.cpp:1037
+msgid "Multiple Extruders"
+msgstr "Multiple Extruders"
+
+#: src/slic3r/GUI/Tab.cpp:1045
+msgid "Ooze prevention"
+msgstr "Ooze prevention"
+
+#: src/slic3r/GUI/Tab.cpp:1062
+msgid "Extrusion width"
+msgstr "Extrusion width"
+
+#: src/slic3r/GUI/Tab.cpp:1072
+msgid "Overlap"
+msgstr "Overlap"
+
+#: src/slic3r/GUI/Tab.cpp:1075
+msgid "Flow"
+msgstr "Flow"
+
+#: src/slic3r/GUI/Tab.cpp:1078
+msgid "Other"
+msgstr "Other"
+
+#: src/slic3r/GUI/Tab.cpp:1085 src/slic3r/GUI/Tab.cpp:3213
+msgid "Output options"
+msgstr "Output options"
+
+#: src/slic3r/GUI/Tab.cpp:1086
+msgid "Sequential printing"
+msgstr "Sequential printing"
+
+#: src/slic3r/GUI/Tab.cpp:1088
+msgid "Extruder clearance (mm)"
+msgstr "Extruder clearance (mm)"
+
+#: src/slic3r/GUI/Tab.cpp:1097 src/slic3r/GUI/Tab.cpp:3214
+msgid "Output file"
+msgstr "Output file"
+
+#: src/slic3r/GUI/Tab.cpp:1103 src/libslic3r/PrintConfig.cpp:1438
+msgid "Post-processing scripts"
+msgstr "Post-processing scripts"
+
+#: src/slic3r/GUI/Tab.cpp:1109 src/slic3r/GUI/Tab.cpp:1110
+#: src/slic3r/GUI/Tab.cpp:1483 src/slic3r/GUI/Tab.cpp:1484
+#: src/slic3r/GUI/Tab.cpp:1883 src/slic3r/GUI/Tab.cpp:1884
+#: src/slic3r/GUI/Tab.cpp:1964 src/slic3r/GUI/Tab.cpp:1965
+#: src/slic3r/GUI/Tab.cpp:3119 src/slic3r/GUI/Tab.cpp:3120
+msgid "Notes"
+msgstr "Notes"
+
+#: src/slic3r/GUI/Tab.cpp:1116 src/slic3r/GUI/Tab.cpp:1491
+#: src/slic3r/GUI/Tab.cpp:1890 src/slic3r/GUI/Tab.cpp:1971
+#: src/slic3r/GUI/Tab.cpp:3127 src/slic3r/GUI/Tab.cpp:3219
+msgid "Dependencies"
+msgstr "Dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:1117 src/slic3r/GUI/Tab.cpp:1492
+#: src/slic3r/GUI/Tab.cpp:1891 src/slic3r/GUI/Tab.cpp:1972
+#: src/slic3r/GUI/Tab.cpp:3128 src/slic3r/GUI/Tab.cpp:3220
+msgid "Profile dependencies"
+msgstr "Profile dependencies"
+
+#: src/slic3r/GUI/Tab.cpp:1161
+#, no-c-format
+msgid ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+
+#: src/slic3r/GUI/Tab.cpp:1168
+msgid "Spiral Vase"
+msgstr "Spiral Vase"
+
+#: src/slic3r/GUI/Tab.cpp:1191
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+msgstr ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+
+#: src/slic3r/GUI/Tab.cpp:1195 src/slic3r/GUI/Tab.cpp:1212
+msgid "Wipe Tower"
+msgstr "Wipe Tower"
+
+#: src/slic3r/GUI/Tab.cpp:1209
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+
+#: src/slic3r/GUI/Tab.cpp:1227
+msgid ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+msgstr ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+
+#: src/slic3r/GUI/Tab.cpp:1230
+msgid "Support Generator"
+msgstr "Support Generator"
+
+#: src/slic3r/GUI/Tab.cpp:1272
+msgid "The "
+msgstr "The "
+
+#: src/slic3r/GUI/Tab.cpp:1272
+#, no-c-format
+msgid ""
+" infill pattern is not supposed to work at 100% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+msgstr ""
+" infill pattern is not supposed to work at 100% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+
+#: src/slic3r/GUI/Tab.cpp:1388
+msgid "Temperature "
+msgstr "Temperature "
+
+#: src/slic3r/GUI/Tab.cpp:1394
+msgid "Bed"
+msgstr "Bed"
+
+#: src/slic3r/GUI/Tab.cpp:1399
+msgid "Cooling"
+msgstr "Cooling"
+
+#: src/slic3r/GUI/Tab.cpp:1400 src/libslic3r/PrintConfig.cpp:1333
+#: src/libslic3r/PrintConfig.cpp:2212
+msgid "Enable"
+msgstr "Enable"
+
+#: src/slic3r/GUI/Tab.cpp:1411
+msgid "Fan settings"
+msgstr "Fan settings"
+
+#: src/slic3r/GUI/Tab.cpp:1412
+msgid "Fan speed"
+msgstr "Fan speed"
+
+#: src/slic3r/GUI/Tab.cpp:1420
+msgid "Cooling thresholds"
+msgstr "Cooling thresholds"
+
+#: src/slic3r/GUI/Tab.cpp:1426
+msgid "Filament properties"
+msgstr "Filament properties"
+
+#: src/slic3r/GUI/Tab.cpp:1430
+msgid "Print speed override"
+msgstr "Print speed override"
+
+#: src/slic3r/GUI/Tab.cpp:1440
+msgid "Toolchange parameters with single extruder MM printers"
+msgstr "Toolchange parameters with single extruder MM printers"
+
+#: src/slic3r/GUI/Tab.cpp:1455
+msgid "Ramming settings"
+msgstr "Ramming settings"
+
+#: src/slic3r/GUI/Tab.cpp:1470 src/slic3r/GUI/Tab.cpp:1846
+msgid "Custom G-code"
+msgstr "Custom G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1471 src/slic3r/GUI/Tab.cpp:1847
+#: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:1833
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1477 src/slic3r/GUI/Tab.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:333 src/libslic3r/PrintConfig.cpp:344
+msgid "End G-code"
+msgstr "End G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1588 src/slic3r/GUI/Tab.cpp:1642
+msgid " Browse "
+msgstr " Browse "
+
+#: src/slic3r/GUI/Tab.cpp:1605 src/slic3r/GUI/Tab.cpp:1788
+msgid "Test"
+msgstr "Test"
+
+#: src/slic3r/GUI/Tab.cpp:1615
+msgid "Could not get a valid Printer Host reference"
+msgstr "Could not get a valid Printer Host reference"
+
+#: src/slic3r/GUI/Tab.cpp:1621 src/slic3r/GUI/Tab.cpp:1801
+msgid "Success!"
+msgstr "Success!"
+
+#: src/slic3r/GUI/Tab.cpp:1636
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+
+#: src/slic3r/GUI/Tab.cpp:1648
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+
+#: src/slic3r/GUI/Tab.cpp:1649
+msgid "Open CA certificate file"
+msgstr "Open CA certificate file"
+
+#: src/slic3r/GUI/Tab.cpp:1676
+msgid ""
+"HTTPS CA File:\n"
+"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"\tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+msgstr ""
+"HTTPS CA File:\n"
+"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"\tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+
+#: src/slic3r/GUI/Tab.cpp:1713 src/slic3r/GUI/Tab.cpp:1912
+msgid "Size and coordinates"
+msgstr "Size and coordinates"
+
+#: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1916
+#: src/slic3r/GUI/Tab.cpp:2792
+msgid " Set "
+msgstr " Set "
+
+#: src/slic3r/GUI/Tab.cpp:1740
+msgid "Capabilities"
+msgstr "Capabilities"
+
+#: src/slic3r/GUI/Tab.cpp:1745
+msgid "Number of extruders of the printer."
+msgstr "Number of extruders of the printer."
+
+#: src/slic3r/GUI/Tab.cpp:1773
+msgid "USB/Serial connection"
+msgstr "USB/Serial connection"
+
+#: src/slic3r/GUI/Tab.cpp:1774 src/libslic3r/PrintConfig.cpp:1660
+msgid "Serial port"
+msgstr "Serial port"
+
+#: src/slic3r/GUI/Tab.cpp:1779
+msgid "Rescan serial ports"
+msgstr "Rescan serial ports"
+
+#: src/slic3r/GUI/Tab.cpp:1801
+msgid "Connection to printer works correctly."
+msgstr "Connection to printer works correctly."
+
+#: src/slic3r/GUI/Tab.cpp:1804
+msgid "Connection failed."
+msgstr "Connection failed."
+
+#: src/slic3r/GUI/Tab.cpp:1817 src/slic3r/GUI/Tab.cpp:1961
+msgid "Print Host upload"
+msgstr "Print Host upload"
+
+#: src/slic3r/GUI/Tab.cpp:1859 src/libslic3r/PrintConfig.cpp:92
+msgid "Before layer change G-code"
+msgstr "Before layer change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1865 src/libslic3r/PrintConfig.cpp:1042
+msgid "After layer change G-code"
+msgstr "After layer change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1871 src/libslic3r/PrintConfig.cpp:2111
+msgid "Tool change G-code"
+msgstr "Tool change G-code"
+
+#: src/slic3r/GUI/Tab.cpp:1877
+msgid "Between objects G-code (for sequential printing)"
+msgstr "Between objects G-code (for sequential printing)"
+
+#: src/slic3r/GUI/Tab.cpp:1938
+msgid "Display"
+msgstr "Display"
+
+#: src/slic3r/GUI/Tab.cpp:1949 src/slic3r/GUI/Tab.cpp:3102
+msgid "Corrections"
+msgstr "Corrections"
+
+#: src/slic3r/GUI/Tab.cpp:2011 src/slic3r/GUI/Tab.cpp:2073
+#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1098
+#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1121
+#: src/libslic3r/PrintConfig.cpp:1132 src/libslic3r/PrintConfig.cpp:1143
+#: src/libslic3r/PrintConfig.cpp:1154
+msgid "Machine limits"
+msgstr "Machine limits"
+
+#: src/slic3r/GUI/Tab.cpp:2025
+msgid "Values in this column are for Full Power mode"
+msgstr "Values in this column are for Full Power mode"
+
+#: src/slic3r/GUI/Tab.cpp:2026
+msgid "Full Power"
+msgstr "Full Power"
+
+#: src/slic3r/GUI/Tab.cpp:2031
+msgid "Values in this column are for Silent mode"
+msgstr "Values in this column are for Silent mode"
+
+#: src/slic3r/GUI/Tab.cpp:2032
+msgid "Silent"
+msgstr "Silent"
+
+#: src/slic3r/GUI/Tab.cpp:2040
+msgid "Maximum feedrates"
+msgstr "Maximum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2045
+msgid "Maximum accelerations"
+msgstr "Maximum accelerations"
+
+#: src/slic3r/GUI/Tab.cpp:2052
+msgid "Jerk limits"
+msgstr "Jerk limits"
+
+#: src/slic3r/GUI/Tab.cpp:2057
+msgid "Minimum feedrates"
+msgstr "Minimum feedrates"
+
+#: src/slic3r/GUI/Tab.cpp:2095 src/slic3r/GUI/Tab.cpp:2103
+msgid "Single extruder MM setup"
+msgstr "Single extruder MM setup"
+
+#: src/slic3r/GUI/Tab.cpp:2104
+msgid "Single extruder multimaterial parameters"
+msgstr "Single extruder multimaterial parameters"
+
+#: src/slic3r/GUI/Tab.cpp:2118 src/libslic3r/GCode/PreviewData.cpp:475
+#, c-format
+msgid "Extruder %d"
+msgstr "Extruder %d"
+
+#: src/slic3r/GUI/Tab.cpp:2125
+msgid "Layer height limits"
+msgstr "Layer height limits"
+
+#: src/slic3r/GUI/Tab.cpp:2130
+msgid "Position (for multi-extruder printers)"
+msgstr "Position (for multi-extruder printers)"
+
+#: src/slic3r/GUI/Tab.cpp:2133
+msgid "Retraction"
+msgstr "Retraction"
+
+#: src/slic3r/GUI/Tab.cpp:2136
+msgid "Only lift Z"
+msgstr "Only lift Z"
+
+#: src/slic3r/GUI/Tab.cpp:2149
+msgid ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+msgstr ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+
+#: src/slic3r/GUI/Tab.cpp:2153
+msgid "Preview"
+msgstr "Preview"
+
+#: src/slic3r/GUI/Tab.cpp:2284
+msgid ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+msgstr ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+
+#: src/slic3r/GUI/Tab.cpp:2286
+msgid "Firmware Retraction"
+msgstr "Firmware Retraction"
+
+#: src/slic3r/GUI/Tab.cpp:2565
+#, c-format
+msgid "Default preset (%s)"
+msgstr "Default preset (%s)"
+
+#: src/slic3r/GUI/Tab.cpp:2566
+#, c-format
+msgid "Preset (%s)"
+msgstr "Preset (%s)"
+
+#: src/slic3r/GUI/Tab.cpp:2583
+msgid "has the following unsaved changes:"
+msgstr "has the following unsaved changes:"
+
+#: src/slic3r/GUI/Tab.cpp:2586
+msgid "is not compatible with printer"
+msgstr "is not compatible with printer"
+
+#: src/slic3r/GUI/Tab.cpp:2587
+msgid "is not compatible with print profile"
+msgstr "is not compatible with print profile"
+
+#: src/slic3r/GUI/Tab.cpp:2589
+msgid "and it has the following unsaved changes:"
+msgstr "and it has the following unsaved changes:"
+
+#: src/slic3r/GUI/Tab.cpp:2592
+msgid "Discard changes and continue anyway?"
+msgstr "Discard changes and continue anyway?"
+
+#: src/slic3r/GUI/Tab.cpp:2593
+msgid "Unsaved Changes"
+msgstr "Unsaved Changes"
+
+#: src/slic3r/GUI/Tab.cpp:2604
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr "It's impossible to print multi-part object(s) with SLA technology."
+
+#: src/slic3r/GUI/Tab.cpp:2605
+msgid "Please check your object list before preset changing."
+msgstr "Please check your object list before preset changing."
+
+#: src/slic3r/GUI/Tab.cpp:2699
+msgid "The supplied name is empty. It can't be saved."
+msgstr "The supplied name is empty. It can't be saved."
+
+#: src/slic3r/GUI/Tab.cpp:2704
+msgid "Cannot overwrite a system profile."
+msgstr "Cannot overwrite a system profile."
+
+#: src/slic3r/GUI/Tab.cpp:2708
+msgid "Cannot overwrite an external profile."
+msgstr "Cannot overwrite an external profile."
+
+#: src/slic3r/GUI/Tab.cpp:2734
+msgid "remove"
+msgstr "remove"
+
+#: src/slic3r/GUI/Tab.cpp:2734
+msgid "delete"
+msgstr "delete"
+
+#: src/slic3r/GUI/Tab.cpp:2735
+msgid "Are you sure you want to "
+msgstr "Are you sure you want to "
+
+#: src/slic3r/GUI/Tab.cpp:2735
+msgid " the selected preset?"
+msgstr " the selected preset?"
+
+#: src/slic3r/GUI/Tab.cpp:2736
+msgid "Remove"
+msgstr "Remove"
+
+#: src/slic3r/GUI/Tab.cpp:2737
+msgid " Preset"
+msgstr " Preset"
+
+#: src/slic3r/GUI/Tab.cpp:2791
+msgid "All"
+msgstr "All"
+
+#: src/slic3r/GUI/Tab.cpp:2869
+msgid ""
+"LOCKED LOCK;indicates that the settings are the same as the system values "
+"for the current option group"
+msgstr ""
+"LOCKED LOCK;indicates that the settings are the same as the system values "
+"for the current option group"
+
+#: src/slic3r/GUI/Tab.cpp:2872
+msgid ""
+"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
+"the system values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+msgstr ""
+"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
+"the system values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+
+#: src/slic3r/GUI/Tab.cpp:2878
+msgid ""
+"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+msgstr ""
+"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+
+#: src/slic3r/GUI/Tab.cpp:2882
+msgid ""
+"BACK ARROW;indicates that the settings were changed and are not equal to the "
+"last saved preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+msgstr ""
+"BACK ARROW;indicates that the settings were changed and are not equal to the "
+"last saved preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:2908
+msgid ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+msgstr ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+
+#: src/slic3r/GUI/Tab.cpp:2910
+msgid ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+msgstr ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+
+#: src/slic3r/GUI/Tab.cpp:2913
+msgid "WHITE BULLET icon indicates a non system preset."
+msgstr "WHITE BULLET icon indicates a non system preset."
+
+#: src/slic3r/GUI/Tab.cpp:2916
+msgid ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+msgstr ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+
+#: src/slic3r/GUI/Tab.cpp:2918
+msgid ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+msgstr ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+
+#: src/slic3r/GUI/Tab.cpp:2924
+msgid ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+msgstr ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+
+#: src/slic3r/GUI/Tab.cpp:2925
+msgid ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+msgstr ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+
+#: src/slic3r/GUI/Tab.cpp:2931
+msgid ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+msgstr ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+
+#: src/slic3r/GUI/Tab.cpp:2932
+msgid ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+msgstr ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+
+#: src/slic3r/GUI/Tab.cpp:3031
+msgid " as:"
+msgstr " as:"
+
+#: src/slic3r/GUI/Tab.cpp:3075
+msgid "the following postfix are not allowed:"
+msgstr "the following postfix are not allowed:"
+
+#: src/slic3r/GUI/Tab.cpp:3079
+msgid "The supplied name is not available."
+msgstr "The supplied name is not available."
+
+#: src/slic3r/GUI/Tab.cpp:3092
+msgid "Material"
+msgstr "Material"
+
+#: src/slic3r/GUI/Tab.cpp:3094 src/slic3r/GUI/Tab.cpp:3176
+msgid "Layers"
+msgstr "Layers"
+
+#: src/slic3r/GUI/Tab.cpp:3098
+msgid "Exposure"
+msgstr "Exposure"
+
+#: src/slic3r/GUI/Tab.cpp:3183
+msgid "Support head"
+msgstr "Support head"
+
+#: src/slic3r/GUI/Tab.cpp:3188
+msgid "Support pillar"
+msgstr "Support pillar"
+
+#: src/slic3r/GUI/Tab.cpp:3196
+msgid "Connection of the support sticks and junctions"
+msgstr "Connection of the support sticks and junctions"
+
+#: src/slic3r/GUI/Tab.cpp:3200
+msgid "Automatic generation"
+msgstr "Automatic generation"
+
+#: src/slic3r/GUI/Tab.hpp:293 src/slic3r/GUI/Tab.hpp:381
+msgid "Print Settings"
+msgstr "Print Settings"
+
+#: src/slic3r/GUI/Tab.hpp:311
+msgid "Filament Settings"
+msgstr "Filament Settings"
+
+#: src/slic3r/GUI/Tab.hpp:344
+msgid "Printer Settings"
+msgstr "Printer Settings"
+
+#: src/slic3r/GUI/Tab.hpp:367
+msgid "Material Settings"
+msgstr "Material Settings"
+
+#: src/slic3r/GUI/Tab.hpp:393
+msgid "Save preset"
+msgstr "Save preset"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:28
+msgid "Update available"
+msgstr "Update available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:28
+msgid "New version of Slic3r PE is available"
+msgstr "New version of Slic3r PE is available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:35
+msgid "To download, follow the link below."
+msgstr "To download, follow the link below."
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:42
+msgid "Current version:"
+msgstr "Current version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:44
+msgid "New version:"
+msgstr "New version:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:52
+msgid "Don't notify about new releases any more"
+msgstr "Don't notify about new releases any more"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:70 src/slic3r/GUI/UpdateDialogs.cpp:162
+msgid "Configuration update"
+msgstr "Configuration update"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:70
+msgid "Configuration update is available"
+msgstr "Configuration update is available"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:73
+msgid ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+msgstr ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:109
+msgid "Slic3r incompatibility"
+msgstr "Slic3r incompatibility"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:109
+msgid "Slic3r configuration is incompatible"
+msgstr "Slic3r configuration is incompatible"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:112
+msgid ""
+"This version of Slic3r PE is not compatible with currently installed "
+"configuration bundles.\n"
+"This probably happened as a result of running an older Slic3r PE after using "
+"a newer one.\n"
+"\n"
+"You may either exit Slic3r and try again with a newer version, or you may re-"
+"run the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this Slic3r.\n"
+msgstr ""
+"This version of Slic3r PE is not compatible with currently installed "
+"configuration bundles.\n"
+"This probably happened as a result of running an older Slic3r PE after using "
+"a newer one.\n"
+"\n"
+"You may either exit Slic3r and try again with a newer version, or you may re-"
+"run the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this Slic3r.\n"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:121
+#, c-format
+msgid "This Slic3r PE version: %s"
+msgstr "This Slic3r PE version: %s"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:126
+msgid "Incompatible bundles:"
+msgstr "Incompatible bundles:"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:142
+msgid "Exit Slic3r"
+msgstr "Exit Slic3r"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:145
+msgid "Re-configure"
+msgstr "Re-configure"
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:166
+#, c-format
+msgid ""
+"Slic3r PE now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+msgstr ""
+"Slic3r PE now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:182
+msgid "For more information please visit our wiki page:"
+msgstr "For more information please visit our wiki page:"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:10
+msgid "Ramming customization"
+msgstr "Ramming customization"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:36
+msgid ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+msgstr ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:78
+msgid "Total ramming time"
+msgstr "Total ramming time"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:80
+msgid "Total rammed volume"
+msgstr "Total rammed volume"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:84
+msgid "Ramming line width"
+msgstr "Ramming line width"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:86
+msgid "Ramming line spacing"
+msgstr "Ramming line spacing"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:138
+msgid "Wipe tower - Purging volume adjustment"
+msgstr "Wipe tower - Purging volume adjustment"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:219
+msgid ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+msgstr ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:220
+msgid "Extruder changed to"
+msgstr "Extruder changed to"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:228
+msgid "unloaded"
+msgstr "unloaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:229
+msgid "loaded"
+msgstr "loaded"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:234
+msgid "Tool #"
+msgstr "Tool #"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:241
+msgid ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+msgstr ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:242
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr "Volume to purge (mm³) when the filament is being"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:256
+msgid "From"
+msgstr "From"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:321
+msgid ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+msgstr ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:333
+msgid "Show simplified settings"
+msgstr "Show simplified settings"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:333
+msgid "Show advanced settings"
+msgstr "Show advanced settings"
+
+#: src/slic3r/Utils/OctoPrint.cpp:65
+#, c-format
+msgid "Mismatched type of print host: %s"
+msgstr "Mismatched type of print host: %s"
+
+#: src/slic3r/Utils/OctoPrint.cpp:80
+msgid "Connection to OctoPrint works correctly."
+msgstr "Connection to OctoPrint works correctly."
+
+#: src/slic3r/Utils/OctoPrint.cpp:86
+msgid "Could not connect to OctoPrint"
+msgstr "Could not connect to OctoPrint"
+
+#: src/slic3r/Utils/OctoPrint.cpp:86
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr "Note: OctoPrint version at least 1.1.0 is required."
+
+#: src/slic3r/Utils/OctoPrint.cpp:181
+msgid "Connection to Prusa SLA works correctly."
+msgstr "Connection to Prusa SLA works correctly."
+
+#: src/slic3r/Utils/OctoPrint.cpp:186
+msgid "Could not connect to Prusa SLA"
+msgstr "Could not connect to Prusa SLA"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:571
+#, c-format
+msgid "requires min. %s and max. %s"
+msgstr "requires min. %s and max. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:576
+#, c-format
+msgid "requires min. %s"
+msgstr "requires min. %s"
+
+#: src/slic3r/Utils/PresetUpdater.cpp:578
+#, c-format
+msgid "requires max. %s"
+msgstr "requires max. %s"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:219
+#: src/slic3r/Utils/FixModelByWin10.cpp:349
+msgid "Exporting the source model"
+msgstr "Exporting the source model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr "Failed loading the input model."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing the model by the Netfabb service"
+msgstr "Repairing the model by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+msgstr "Mesh repair failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:251
+#: src/slic3r/Utils/FixModelByWin10.cpp:367
+msgid "Loading the repaired model"
+msgstr "Loading the repaired model"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:263
+#: src/slic3r/Utils/FixModelByWin10.cpp:270
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgid "Saving mesh into the 3MF container failed."
+msgstr "Saving mesh into the 3MF container failed."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:334
+msgid "Model fixing"
+msgstr "Model fixing"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:335
+msgid "Exporting model..."
+msgstr "Exporting model..."
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:357
+msgid "Export of a temporary 3mf file failed"
+msgstr "Export of a temporary 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:372
+msgid "Import of the repaired 3mf file failed"
+msgstr "Import of the repaired 3mf file failed"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:375
+msgid "Model repair finished"
+msgstr "Model repair finished"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:379
+msgid "Model repair canceled"
+msgstr "Model repair canceled"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:396
+msgid "Model repaired successfully"
+msgstr "Model repaired successfully"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:396
+#: src/slic3r/Utils/FixModelByWin10.cpp:399
+msgid "Model Repair by the Netfabb service"
+msgstr "Model Repair by the Netfabb service"
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:399
+msgid "Model repair failed: \n"
+msgstr "Model repair failed: \n"
+
+#: src/libslic3r/Print.cpp:1175
+msgid "All objects are outside of the print volume."
+msgstr "All objects are outside of the print volume."
+
+#: src/libslic3r/Print.cpp:1201
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr "Some objects are too close; your extruder will collide with them."
+
+#: src/libslic3r/Print.cpp:1216
+msgid ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+msgstr ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+
+#: src/libslic3r/Print.cpp:1226
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr "The Spiral Vase option can only be used when printing a single object."
+
+#: src/libslic3r/Print.cpp:1228
+msgid ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+msgstr ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+
+#: src/libslic3r/Print.cpp:1234
+msgid ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+msgstr ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+
+#: src/libslic3r/Print.cpp:1239
+msgid ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+msgstr ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+
+#: src/libslic3r/Print.cpp:1241
+msgid ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+msgstr ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+
+#: src/libslic3r/Print.cpp:1253
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heigths"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heigths"
+
+#: src/libslic3r/Print.cpp:1255
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+
+#: src/libslic3r/Print.cpp:1257
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+
+#: src/libslic3r/Print.cpp:1259
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+msgstr ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+
+#: src/libslic3r/Print.cpp:1281
+msgid ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+msgstr ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+
+#: src/libslic3r/Print.cpp:1290
+msgid "The supplied settings will cause an empty print."
+msgstr "The supplied settings will cause an empty print."
+
+#: src/libslic3r/Print.cpp:1307
+msgid ""
+"One or more object were assigned an extruder that the printer does not have."
+msgstr ""
+"One or more object were assigned an extruder that the printer does not have."
+
+#: src/libslic3r/Print.cpp:1316
+msgid ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+msgstr ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+
+#: src/libslic3r/Print.cpp:1324
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+msgstr ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+
+#: src/libslic3r/Print.cpp:1328
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+msgstr ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+
+#: src/libslic3r/Print.cpp:1335
+msgid "first_layer_height"
+msgstr "first_layer_height"
+
+#: src/libslic3r/Print.cpp:1350
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr "First layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/Print.cpp:1354
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr "Layer height can't be greater than nozzle diameter"
+
+#: src/libslic3r/PrintConfig.cpp:32 src/libslic3r/PrintConfig.cpp:33
+msgid "Printer technology"
+msgstr "Printer technology"
+
+#: src/libslic3r/PrintConfig.cpp:41
+msgid "Bed shape"
+msgstr "Bed shape"
+
+#: src/libslic3r/PrintConfig.cpp:48
+msgid ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+msgstr ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+
+#: src/libslic3r/PrintConfig.cpp:56
+msgid "Max print height"
+msgstr "Max print height"
+
+#: src/libslic3r/PrintConfig.cpp:57
+msgid ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+msgstr ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+
+#: src/libslic3r/PrintConfig.cpp:73
+msgid "Avoid crossing perimeters"
+msgstr "Avoid crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:74
+msgid ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+msgstr ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+
+#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:2080
+msgid "Other layers"
+msgstr "Other layers"
+
+#: src/libslic3r/PrintConfig.cpp:83
+msgid ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+msgstr ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:86
+msgid "Bed temperature"
+msgstr "Bed temperature"
+
+#: src/libslic3r/PrintConfig.cpp:93
+msgid ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+msgstr ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:104
+msgid "Between objects G-code"
+msgstr "Between objects G-code"
+
+#: src/libslic3r/PrintConfig.cpp:105
+msgid ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+
+#: src/libslic3r/PrintConfig.cpp:114
+msgctxt "Layers"
+msgid "Bottom"
+msgstr "Bottom"
+
+#: src/libslic3r/PrintConfig.cpp:116
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr "Number of solid layers to generate on bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:118
+msgid "Bottom solid layers"
+msgstr "Bottom solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:123
+msgid "Bridge"
+msgstr "Bridge"
+
+#: src/libslic3r/PrintConfig.cpp:124
+msgid ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+msgstr ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+
+#: src/libslic3r/PrintConfig.cpp:126 src/libslic3r/PrintConfig.cpp:274
+#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:941
+#: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1156 src/libslic3r/PrintConfig.cpp:1386
+msgid "mm/s²"
+msgstr "mm/s²"
+
+#: src/libslic3r/PrintConfig.cpp:133
+msgid "Bridging angle"
+msgstr "Bridging angle"
+
+#: src/libslic3r/PrintConfig.cpp:135
+msgid ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+msgstr ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+
+#: src/libslic3r/PrintConfig.cpp:138 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:1637 src/libslic3r/PrintConfig.cpp:1648
+#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:2063
+#: src/libslic3r/PrintConfig.cpp:2578
+msgid "°"
+msgstr "°"
+
+#: src/libslic3r/PrintConfig.cpp:145
+msgid "Bridges fan speed"
+msgstr "Bridges fan speed"
+
+#: src/libslic3r/PrintConfig.cpp:146
+msgid "This fan speed is enforced during all bridges and overhangs."
+msgstr "This fan speed is enforced during all bridges and overhangs."
+
+#: src/libslic3r/PrintConfig.cpp:147 src/libslic3r/PrintConfig.cpp:747
+#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1232
+#: src/libslic3r/PrintConfig.cpp:1517
+msgid "%"
+msgstr "%"
+
+#: src/libslic3r/PrintConfig.cpp:155
+msgid "Bridge flow ratio"
+msgstr "Bridge flow ratio"
+
+#: src/libslic3r/PrintConfig.cpp:157
+msgid ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+msgstr ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+
+#: src/libslic3r/PrintConfig.cpp:168
+msgid "Bridges"
+msgstr "Bridges"
+
+#: src/libslic3r/PrintConfig.cpp:170
+msgid "Speed for printing bridges."
+msgstr "Speed for printing bridges."
+
+#: src/libslic3r/PrintConfig.cpp:171 src/libslic3r/PrintConfig.cpp:564
+#: src/libslic3r/PrintConfig.cpp:573 src/libslic3r/PrintConfig.cpp:583
+#: src/libslic3r/PrintConfig.cpp:592 src/libslic3r/PrintConfig.cpp:623
+#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:884
+#: src/libslic3r/PrintConfig.cpp:1013 src/libslic3r/PrintConfig.cpp:1090
+#: src/libslic3r/PrintConfig.cpp:1110 src/libslic3r/PrintConfig.cpp:1123
+#: src/libslic3r/PrintConfig.cpp:1134 src/libslic3r/PrintConfig.cpp:1189
+#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:1611
+#: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2160
+msgid "mm/s"
+msgstr "mm/s"
+
+#: src/libslic3r/PrintConfig.cpp:178
+msgid "Brim width"
+msgstr "Brim width"
+
+#: src/libslic3r/PrintConfig.cpp:179
+msgid ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid "Clip multi-part objects"
+msgstr "Clip multi-part objects"
+
+#: src/libslic3r/PrintConfig.cpp:188
+msgid ""
+"When printing multi-material objects, this settings will make slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+"When printing multi-material objects, this settings will make slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+
+#: src/libslic3r/PrintConfig.cpp:196
+msgid "Colorprint height"
+msgstr "Colorprint height"
+
+#: src/libslic3r/PrintConfig.cpp:197
+msgid "Heights at which a filament change is to occur. "
+msgstr "Heights at which a filament change is to occur. "
+
+#: src/libslic3r/PrintConfig.cpp:207
+msgid "Compatible printers condition"
+msgstr "Compatible printers condition"
+
+#: src/libslic3r/PrintConfig.cpp:208
+msgid ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+msgstr ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+
+#: src/libslic3r/PrintConfig.cpp:220
+msgid "Compatible print profiles condition"
+msgstr "Compatible print profiles condition"
+
+#: src/libslic3r/PrintConfig.cpp:221
+msgid ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+msgstr ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+
+#: src/libslic3r/PrintConfig.cpp:235
+msgid "Complete individual objects"
+msgstr "Complete individual objects"
+
+#: src/libslic3r/PrintConfig.cpp:236
+msgid ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+msgstr ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+
+#: src/libslic3r/PrintConfig.cpp:245
+msgid "Enable auto cooling"
+msgstr "Enable auto cooling"
+
+#: src/libslic3r/PrintConfig.cpp:246
+msgid ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+msgstr ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+
+#: src/libslic3r/PrintConfig.cpp:252
+msgid "Cooling tube position"
+msgstr "Cooling tube position"
+
+#: src/libslic3r/PrintConfig.cpp:253
+msgid "Distance of the center-point of the cooling tube from the extruder tip "
+msgstr ""
+"Distance of the center-point of the cooling tube from the extruder tip "
+
+#: src/libslic3r/PrintConfig.cpp:261
+msgid "Cooling tube length"
+msgstr "Cooling tube length"
+
+#: src/libslic3r/PrintConfig.cpp:262
+msgid "Length of the cooling tube to limit space for cooling moves inside it "
+msgstr "Length of the cooling tube to limit space for cooling moves inside it "
+
+#: src/libslic3r/PrintConfig.cpp:271
+msgid ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+msgstr ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+
+#: src/libslic3r/PrintConfig.cpp:281
+msgid "Default filament profile"
+msgstr "Default filament profile"
+
+#: src/libslic3r/PrintConfig.cpp:282
+msgid ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+msgstr ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+
+#: src/libslic3r/PrintConfig.cpp:287
+msgid "Default print profile"
+msgstr "Default print profile"
+
+#: src/libslic3r/PrintConfig.cpp:288 src/libslic3r/PrintConfig.cpp:2469
+#: src/libslic3r/PrintConfig.cpp:2479
+msgid ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+msgstr ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+
+#: src/libslic3r/PrintConfig.cpp:293
+msgid "Disable fan for the first"
+msgstr "Disable fan for the first"
+
+#: src/libslic3r/PrintConfig.cpp:294
+msgid ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+msgstr ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+
+#: src/libslic3r/PrintConfig.cpp:296 src/libslic3r/PrintConfig.cpp:952
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:1691
+#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1935
+#: src/libslic3r/PrintConfig.cpp:1985
+msgid "layers"
+msgstr "layers"
+
+#: src/libslic3r/PrintConfig.cpp:304
+msgid "Don't support bridges"
+msgstr "Don't support bridges"
+
+#: src/libslic3r/PrintConfig.cpp:306
+msgid ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+msgstr ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+
+#: src/libslic3r/PrintConfig.cpp:313
+msgid "Distance between copies"
+msgstr "Distance between copies"
+
+#: src/libslic3r/PrintConfig.cpp:314
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr "Distance used for the auto-arrange feature of the plater."
+
+#: src/libslic3r/PrintConfig.cpp:322
+msgid "Elephant foot compensation"
+msgstr "Elephant foot compensation"
+
+#: src/libslic3r/PrintConfig.cpp:324
+msgid ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+msgstr ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+
+#: src/libslic3r/PrintConfig.cpp:334
+msgid ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+msgstr ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+
+#: src/libslic3r/PrintConfig.cpp:345
+msgid ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+msgstr ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+
+#: src/libslic3r/PrintConfig.cpp:356
+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+#: src/libslic3r/PrintConfig.cpp:358
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
+#: src/libslic3r/PrintConfig.cpp:365
+msgid "Top/bottom fill pattern"
+msgstr "Top/bottom fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:367
+msgid ""
+"Fill pattern for top/bottom infill. This only affects the external visible "
+"layer, and not its adjacent solid shells."
+msgstr ""
+"Fill pattern for top/bottom infill. This only affects the external visible "
+"layer, and not its adjacent solid shells."
+
+#: src/libslic3r/PrintConfig.cpp:376 src/libslic3r/PrintConfig.cpp:800
+#: src/libslic3r/PrintConfig.cpp:2021
+msgid "Rectilinear"
+msgstr "Rectilinear"
+
+#: src/libslic3r/PrintConfig.cpp:377 src/libslic3r/PrintConfig.cpp:806
+msgid "Concentric"
+msgstr "Concentric"
+
+#: src/libslic3r/PrintConfig.cpp:378 src/libslic3r/PrintConfig.cpp:810
+msgid "Hilbert Curve"
+msgstr "Hilbert Curve"
+
+#: src/libslic3r/PrintConfig.cpp:379 src/libslic3r/PrintConfig.cpp:811
+msgid "Archimedean Chords"
+msgstr "Archimedean Chords"
+
+#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:812
+msgid "Octagram Spiral"
+msgstr "Octagram Spiral"
+
+#: src/libslic3r/PrintConfig.cpp:386 src/libslic3r/PrintConfig.cpp:397
+msgid "External perimeters"
+msgstr "External perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:388
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:391 src/libslic3r/PrintConfig.cpp:841
+#: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1769 src/libslic3r/PrintConfig.cpp:1958
+#: src/libslic3r/PrintConfig.cpp:2129
+msgid "mm or % (leave 0 for default)"
+msgstr "mm or % (leave 0 for default)"
+
+#: src/libslic3r/PrintConfig.cpp:399
+msgid ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:864
+#: src/libslic3r/PrintConfig.cpp:1725 src/libslic3r/PrintConfig.cpp:1780
+#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2142
+msgid "mm/s or %"
+msgstr "mm/s or %"
+
+#: src/libslic3r/PrintConfig.cpp:409
+msgid "External perimeters first"
+msgstr "External perimeters first"
+
+#: src/libslic3r/PrintConfig.cpp:411
+msgid ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+msgstr ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+
+#: src/libslic3r/PrintConfig.cpp:418
+msgid "Extra perimeters if needed"
+msgstr "Extra perimeters if needed"
+
+#: src/libslic3r/PrintConfig.cpp:420
+#, no-c-format
+msgid ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+msgstr ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+
+#: src/libslic3r/PrintConfig.cpp:431
+msgid ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+msgstr ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+msgstr ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+
+#: src/libslic3r/PrintConfig.cpp:455
+msgid "Radius"
+msgstr "Radius"
+
+#: src/libslic3r/PrintConfig.cpp:456
+msgid ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+msgstr ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+
+#: src/libslic3r/PrintConfig.cpp:467
+msgid "Extruder Color"
+msgstr "Extruder Color"
+
+#: src/libslic3r/PrintConfig.cpp:468 src/libslic3r/PrintConfig.cpp:535
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr "This is only used in the Slic3r interface as a visual help."
+
+#: src/libslic3r/PrintConfig.cpp:475
+msgid "Extruder offset"
+msgstr "Extruder offset"
+
+#: src/libslic3r/PrintConfig.cpp:476
+msgid ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+msgstr ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+
+#: src/libslic3r/PrintConfig.cpp:486
+msgid "Extrusion axis"
+msgstr "Extrusion axis"
+
+#: src/libslic3r/PrintConfig.cpp:487
+msgid ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+msgstr ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+
+#: src/libslic3r/PrintConfig.cpp:493
+msgid "Extrusion multiplier"
+msgstr "Extrusion multiplier"
+
+#: src/libslic3r/PrintConfig.cpp:494
+msgid ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+msgstr ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+
+#: src/libslic3r/PrintConfig.cpp:503
+msgid "Default extrusion width"
+msgstr "Default extrusion width"
+
+#: src/libslic3r/PrintConfig.cpp:505
+msgid ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+msgstr ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+
+#: src/libslic3r/PrintConfig.cpp:509
+msgid "mm or % (leave 0 for auto)"
+msgstr "mm or % (leave 0 for auto)"
+
+#: src/libslic3r/PrintConfig.cpp:515
+msgid "Keep fan always on"
+msgstr "Keep fan always on"
+
+#: src/libslic3r/PrintConfig.cpp:516
+msgid ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+msgstr ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+
+#: src/libslic3r/PrintConfig.cpp:522
+msgid "Enable fan if layer print time is below"
+msgstr "Enable fan if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:523
+msgid ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+msgstr ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+
+#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1711
+msgid "approximate seconds"
+msgstr "approximate seconds"
+
+#: src/libslic3r/PrintConfig.cpp:534
+msgid "Color"
+msgstr "Color"
+
+#: src/libslic3r/PrintConfig.cpp:541
+msgid "Filament notes"
+msgstr "Filament notes"
+
+#: src/libslic3r/PrintConfig.cpp:542
+msgid "You can put your notes regarding the filament here."
+msgstr "You can put your notes regarding the filament here."
+
+#: src/libslic3r/PrintConfig.cpp:551 src/libslic3r/PrintConfig.cpp:1196
+msgid "Max volumetric speed"
+msgstr "Max volumetric speed"
+
+#: src/libslic3r/PrintConfig.cpp:552
+msgid ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+msgstr ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+
+#: src/libslic3r/PrintConfig.cpp:555 src/libslic3r/PrintConfig.cpp:1199
+msgid "mm³/s"
+msgstr "mm³/s"
+
+#: src/libslic3r/PrintConfig.cpp:562
+msgid "Loading speed"
+msgstr "Loading speed"
+
+#: src/libslic3r/PrintConfig.cpp:563
+msgid "Speed used for loading the filament on the wipe tower. "
+msgstr "Speed used for loading the filament on the wipe tower. "
+
+#: src/libslic3r/PrintConfig.cpp:571
+msgid "Loading speed at the start"
+msgstr "Loading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:572
+msgid "Speed used at the very beginning of loading phase. "
+msgstr "Speed used at the very beginning of loading phase. "
+
+#: src/libslic3r/PrintConfig.cpp:580
+msgid "Unloading speed"
+msgstr "Unloading speed"
+
+#: src/libslic3r/PrintConfig.cpp:581
+msgid ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming). "
+msgstr ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming). "
+
+#: src/libslic3r/PrintConfig.cpp:590
+msgid "Unloading speed at the start"
+msgstr "Unloading speed at the start"
+
+#: src/libslic3r/PrintConfig.cpp:591
+msgid ""
+"Speed used for unloading the tip of the filament immediately after ramming. "
+msgstr ""
+"Speed used for unloading the tip of the filament immediately after ramming. "
+
+#: src/libslic3r/PrintConfig.cpp:599
+msgid "Delay after unloading"
+msgstr "Delay after unloading"
+
+#: src/libslic3r/PrintConfig.cpp:600
+msgid ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions. "
+msgstr ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions. "
+
+#: src/libslic3r/PrintConfig.cpp:610
+msgid "Number of cooling moves"
+msgstr "Number of cooling moves"
+
+#: src/libslic3r/PrintConfig.cpp:611
+msgid ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves "
+msgstr ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves "
+
+#: src/libslic3r/PrintConfig.cpp:620
+msgid "Speed of the first cooling move"
+msgstr "Speed of the first cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:621
+msgid "Cooling moves are gradually accelerating beginning at this speed. "
+msgstr "Cooling moves are gradually accelerating beginning at this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:629
+msgid "Minimal purge on wipe tower"
+msgstr "Minimal purge on wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:630
+msgid ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+msgstr ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+
+#: src/libslic3r/PrintConfig.cpp:635
+msgid "mm³"
+msgstr "mm³"
+
+#: src/libslic3r/PrintConfig.cpp:641
+msgid "Speed of the last cooling move"
+msgstr "Speed of the last cooling move"
+
+#: src/libslic3r/PrintConfig.cpp:642
+msgid "Cooling moves are gradually accelerating towards this speed. "
+msgstr "Cooling moves are gradually accelerating towards this speed. "
+
+#: src/libslic3r/PrintConfig.cpp:650
+msgid "Filament load time"
+msgstr "Filament load time"
+
+#: src/libslic3r/PrintConfig.cpp:651
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:659
+msgid "Ramming parameters"
+msgstr "Ramming parameters"
+
+#: src/libslic3r/PrintConfig.cpp:660
+msgid ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters "
+msgstr ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters "
+
+#: src/libslic3r/PrintConfig.cpp:667
+msgid "Filament unload time"
+msgstr "Filament unload time"
+
+#: src/libslic3r/PrintConfig.cpp:668
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+
+#: src/libslic3r/PrintConfig.cpp:677
+msgid ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+msgstr ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+
+#: src/libslic3r/PrintConfig.cpp:685
+msgid "Density"
+msgstr "Density"
+
+#: src/libslic3r/PrintConfig.cpp:686
+msgid ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+msgstr ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+
+#: src/libslic3r/PrintConfig.cpp:689
+msgid "g/cm³"
+msgstr "g/cm³"
+
+#: src/libslic3r/PrintConfig.cpp:695
+msgid "Filament type"
+msgstr "Filament type"
+
+#: src/libslic3r/PrintConfig.cpp:696
+msgid "The filament material type for use in custom G-codes."
+msgstr "The filament material type for use in custom G-codes."
+
+#: src/libslic3r/PrintConfig.cpp:712
+msgid "Soluble material"
+msgstr "Soluble material"
+
+#: src/libslic3r/PrintConfig.cpp:713
+msgid "Soluble material is most likely used for a soluble support."
+msgstr "Soluble material is most likely used for a soluble support."
+
+#: src/libslic3r/PrintConfig.cpp:719
+msgid ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+msgstr ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+
+#: src/libslic3r/PrintConfig.cpp:720
+msgid "money/kg"
+msgstr "money/kg"
+
+#: src/libslic3r/PrintConfig.cpp:729
+msgid "Fill angle"
+msgstr "Fill angle"
+
+#: src/libslic3r/PrintConfig.cpp:731
+msgid ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+msgstr ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+
+#: src/libslic3r/PrintConfig.cpp:744
+msgid "Fill density"
+msgstr "Fill density"
+
+#: src/libslic3r/PrintConfig.cpp:746
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr "Density of internal infill, expressed in the range 0% - 100%."
+
+#: src/libslic3r/PrintConfig.cpp:782
+msgid "Fill pattern"
+msgstr "Fill pattern"
+
+#: src/libslic3r/PrintConfig.cpp:784
+msgid "Fill pattern for general low-density infill."
+msgstr "Fill pattern for general low-density infill."
+
+#: src/libslic3r/PrintConfig.cpp:801
+msgid "Grid"
+msgstr "Grid"
+
+#: src/libslic3r/PrintConfig.cpp:802
+msgid "Triangles"
+msgstr "Triangles"
+
+#: src/libslic3r/PrintConfig.cpp:803
+msgid "Stars"
+msgstr "Stars"
+
+#: src/libslic3r/PrintConfig.cpp:804
+msgid "Cubic"
+msgstr "Cubic"
+
+#: src/libslic3r/PrintConfig.cpp:805
+msgid "Line"
+msgstr "Line"
+
+#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:2023
+msgid "Honeycomb"
+msgstr "Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:808
+msgid "3D Honeycomb"
+msgstr "3D Honeycomb"
+
+#: src/libslic3r/PrintConfig.cpp:809
+msgid "Gyroid"
+msgstr "Gyroid"
+
+#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:826
+#: src/libslic3r/PrintConfig.cpp:835 src/libslic3r/PrintConfig.cpp:871
+msgid "First layer"
+msgstr "First layer"
+
+#: src/libslic3r/PrintConfig.cpp:817
+msgid ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+msgstr ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+
+#: src/libslic3r/PrintConfig.cpp:827
+msgid ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+msgstr ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:837
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+
+#: src/libslic3r/PrintConfig.cpp:848
+msgid "First layer height"
+msgstr "First layer height"
+
+#: src/libslic3r/PrintConfig.cpp:850
+msgid ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+msgstr ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+
+#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1003
+#: src/libslic3r/PrintConfig.cpp:1884
+msgid "mm or %"
+msgstr "mm or %"
+
+#: src/libslic3r/PrintConfig.cpp:860
+msgid "First layer speed"
+msgstr "First layer speed"
+
+#: src/libslic3r/PrintConfig.cpp:861
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+msgstr ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+
+#: src/libslic3r/PrintConfig.cpp:872
+msgid ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+msgstr ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+
+#: src/libslic3r/PrintConfig.cpp:882
+msgid ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+msgstr ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+
+#: src/libslic3r/PrintConfig.cpp:890
+msgid "Verbose G-code"
+msgstr "Verbose G-code"
+
+#: src/libslic3r/PrintConfig.cpp:891
+msgid ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+msgstr ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+
+#: src/libslic3r/PrintConfig.cpp:899
+msgid "G-code flavor"
+msgstr "G-code flavor"
+
+#: src/libslic3r/PrintConfig.cpp:900
+msgid ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+msgstr ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "No extrusion"
+msgstr "No extrusion"
+
+#: src/libslic3r/PrintConfig.cpp:929
+msgid "High extruder current on filament swap"
+msgstr "High extruder current on filament swap"
+
+#: src/libslic3r/PrintConfig.cpp:930
+msgid ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+msgstr ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+
+#: src/libslic3r/PrintConfig.cpp:939
+msgid ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+msgstr ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+
+#: src/libslic3r/PrintConfig.cpp:948
+msgid "Combine infill every"
+msgstr "Combine infill every"
+
+#: src/libslic3r/PrintConfig.cpp:950
+msgid ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+
+#: src/libslic3r/PrintConfig.cpp:954
+msgid "Combine infill every n layers"
+msgstr "Combine infill every n layers"
+
+#: src/libslic3r/PrintConfig.cpp:960
+msgid "Infill extruder"
+msgstr "Infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:962
+msgid "The extruder to use when printing infill."
+msgstr "The extruder to use when printing infill."
+
+#: src/libslic3r/PrintConfig.cpp:971
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:981
+msgid "Infill before perimeters"
+msgstr "Infill before perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:982
+msgid ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+msgstr ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+
+#: src/libslic3r/PrintConfig.cpp:988
+msgid "Only infill where needed"
+msgstr "Only infill where needed"
+
+#: src/libslic3r/PrintConfig.cpp:990
+msgid ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+msgstr ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+
+#: src/libslic3r/PrintConfig.cpp:998
+msgid "Infill/perimeters overlap"
+msgstr "Infill/perimeters overlap"
+
+#: src/libslic3r/PrintConfig.cpp:1000
+msgid ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+msgstr ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+
+#: src/libslic3r/PrintConfig.cpp:1012
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr "Speed for printing the internal fill. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1020
+msgid "Inherits profile"
+msgstr "Inherits profile"
+
+#: src/libslic3r/PrintConfig.cpp:1021
+msgid "Name of the profile, from which this profile inherits."
+msgstr "Name of the profile, from which this profile inherits."
+
+#: src/libslic3r/PrintConfig.cpp:1032
+msgid "Interface shells"
+msgstr "Interface shells"
+
+#: src/libslic3r/PrintConfig.cpp:1033
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+msgstr ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+
+#: src/libslic3r/PrintConfig.cpp:1043
+msgid ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+msgstr ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+
+#: src/libslic3r/PrintConfig.cpp:1054
+msgid "Supports remaining times"
+msgstr "Supports remaining times"
+
+#: src/libslic3r/PrintConfig.cpp:1055
+msgid ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+msgstr ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+
+#: src/libslic3r/PrintConfig.cpp:1063
+msgid "Supports silent mode"
+msgstr "Supports silent mode"
+
+#: src/libslic3r/PrintConfig.cpp:1064
+msgid "Set silent mode for the G-code flavor"
+msgstr "Set silent mode for the G-code flavor"
+
+#: src/libslic3r/PrintConfig.cpp:1087
+msgid "Maximum feedrate %1%"
+msgstr "Maximum feedrate %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1089
+msgid "Maximum feedrate of the %1% axis"
+msgstr "Maximum feedrate of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1097
+msgid "Maximum acceleration %1%"
+msgstr "Maximum acceleration %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1099
+msgid "Maximum acceleration of the %1% axis"
+msgstr "Maximum acceleration of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1107
+msgid "Maximum jerk %1%"
+msgstr "Maximum jerk %1%"
+
+#: src/libslic3r/PrintConfig.cpp:1109
+msgid "Maximum jerk of the %1% axis"
+msgstr "Maximum jerk of the %1% axis"
+
+#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1122
+msgid "Minimum feedrate when extruding"
+msgstr "Minimum feedrate when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133
+msgid "Minimum travel feedrate"
+msgstr "Minimum travel feedrate"
+
+#: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1144
+msgid "Maximum acceleration when extruding"
+msgstr "Maximum acceleration when extruding"
+
+#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1155
+msgid "Maximum acceleration when retracting"
+msgstr "Maximum acceleration when retracting"
+
+#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1173
+msgid "Max"
+msgstr "Max"
+
+#: src/libslic3r/PrintConfig.cpp:1164
+msgid "This setting represents the maximum speed of your fan."
+msgstr "This setting represents the maximum speed of your fan."
+
+#: src/libslic3r/PrintConfig.cpp:1174
+#, no-c-format
+msgid ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:1185
+msgid "Max print speed"
+msgstr "Max print speed"
+
+#: src/libslic3r/PrintConfig.cpp:1186
+msgid ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+msgstr ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+
+#: src/libslic3r/PrintConfig.cpp:1197
+msgid ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+msgstr ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+
+#: src/libslic3r/PrintConfig.cpp:1206
+msgid "Max volumetric slope positive"
+msgstr "Max volumetric slope positive"
+
+#: src/libslic3r/PrintConfig.cpp:1207 src/libslic3r/PrintConfig.cpp:1219
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+
+#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1223
+msgid "mm³/s²"
+msgstr "mm³/s²"
+
+#: src/libslic3r/PrintConfig.cpp:1218
+msgid "Max volumetric slope negative"
+msgstr "Max volumetric slope negative"
+
+#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1240
+msgid "Min"
+msgstr "Min"
+
+#: src/libslic3r/PrintConfig.cpp:1231
+msgid "This setting represents the minimum PWM your fan needs to work."
+msgstr "This setting represents the minimum PWM your fan needs to work."
+
+#: src/libslic3r/PrintConfig.cpp:1241
+msgid ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+msgstr ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+
+#: src/libslic3r/PrintConfig.cpp:1250
+msgid "Min print speed"
+msgstr "Min print speed"
+
+#: src/libslic3r/PrintConfig.cpp:1251
+msgid "Slic3r will not scale speed down below this speed."
+msgstr "Slic3r will not scale speed down below this speed."
+
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "Minimal filament extrusion length"
+msgstr "Minimal filament extrusion length"
+
+#: src/libslic3r/PrintConfig.cpp:1260
+msgid ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+msgstr ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+
+#: src/libslic3r/PrintConfig.cpp:1270
+msgid "Configuration notes"
+msgstr "Configuration notes"
+
+#: src/libslic3r/PrintConfig.cpp:1271
+msgid ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+msgstr ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+
+#: src/libslic3r/PrintConfig.cpp:1281
+msgid "Nozzle diameter"
+msgstr "Nozzle diameter"
+
+#: src/libslic3r/PrintConfig.cpp:1282
+msgid ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+
+#: src/libslic3r/PrintConfig.cpp:1288
+msgid "Host Type"
+msgstr "Host Type"
+
+#: src/libslic3r/PrintConfig.cpp:1289
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+
+#: src/libslic3r/PrintConfig.cpp:1301
+msgid "API Key / Password"
+msgstr "API Key / Password"
+
+#: src/libslic3r/PrintConfig.cpp:1302
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+
+#: src/libslic3r/PrintConfig.cpp:1317
+msgid "Hostname, IP or URL"
+msgstr "Hostname, IP or URL"
+
+#: src/libslic3r/PrintConfig.cpp:1318
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+msgstr ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+
+#: src/libslic3r/PrintConfig.cpp:1325
+msgid "Only retract when crossing perimeters"
+msgstr "Only retract when crossing perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1326
+msgid ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+msgstr ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+
+#: src/libslic3r/PrintConfig.cpp:1334
+msgid ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+msgstr ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+
+#: src/libslic3r/PrintConfig.cpp:1342
+msgid "Output filename format"
+msgstr "Output filename format"
+
+#: src/libslic3r/PrintConfig.cpp:1343
+msgid ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+msgstr ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+
+#: src/libslic3r/PrintConfig.cpp:1353
+msgid "Detect bridging perimeters"
+msgstr "Detect bridging perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1355
+msgid ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+msgstr ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+
+#: src/libslic3r/PrintConfig.cpp:1362
+msgid "Filament parking position"
+msgstr "Filament parking position"
+
+#: src/libslic3r/PrintConfig.cpp:1363
+msgid ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware. "
+msgstr ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware. "
+
+#: src/libslic3r/PrintConfig.cpp:1372
+msgid "Extra loading distance"
+msgstr "Extra loading distance"
+
+#: src/libslic3r/PrintConfig.cpp:1373
+msgid ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading. "
+msgstr ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading. "
+
+#: src/libslic3r/PrintConfig.cpp:1382 src/libslic3r/PrintConfig.cpp:1402
+#: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1425
+msgid "Perimeters"
+msgstr "Perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1383
+msgid ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+msgstr ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+
+#: src/libslic3r/PrintConfig.cpp:1392
+msgid "Perimeter extruder"
+msgstr "Perimeter extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1394
+msgid ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+
+#: src/libslic3r/PrintConfig.cpp:1404
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1417
+msgid ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1427
+msgid ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+msgstr ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+
+#: src/libslic3r/PrintConfig.cpp:1431
+msgid "(minimum)"
+msgstr "(minimum)"
+
+#: src/libslic3r/PrintConfig.cpp:1439
+msgid ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+msgstr ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+
+#: src/libslic3r/PrintConfig.cpp:1452
+msgid "Printer type"
+msgstr "Printer type"
+
+#: src/libslic3r/PrintConfig.cpp:1453
+msgid "Type of the printer."
+msgstr "Type of the printer."
+
+#: src/libslic3r/PrintConfig.cpp:1457
+msgid "Printer notes"
+msgstr "Printer notes"
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid "You can put your notes regarding the printer here."
+msgstr "You can put your notes regarding the printer here."
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid "Printer vendor"
+msgstr "Printer vendor"
+
+#: src/libslic3r/PrintConfig.cpp:1468
+msgid "Name of the printer vendor."
+msgstr "Name of the printer vendor."
+
+#: src/libslic3r/PrintConfig.cpp:1472
+msgid "Printer variant"
+msgstr "Printer variant"
+
+#: src/libslic3r/PrintConfig.cpp:1473
+msgid ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+msgstr ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+
+#: src/libslic3r/PrintConfig.cpp:1483
+msgid "Raft layers"
+msgstr "Raft layers"
+
+#: src/libslic3r/PrintConfig.cpp:1485
+msgid ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+msgstr ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+
+#: src/libslic3r/PrintConfig.cpp:1494
+msgid "Resolution"
+msgstr "Resolution"
+
+#: src/libslic3r/PrintConfig.cpp:1495
+msgid ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+msgstr ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+
+#: src/libslic3r/PrintConfig.cpp:1506
+msgid "Minimum travel after retraction"
+msgstr "Minimum travel after retraction"
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid ""
+"Retraction is not triggered when travel moves are shorter than this length."
+msgstr ""
+"Retraction is not triggered when travel moves are shorter than this length."
+
+#: src/libslic3r/PrintConfig.cpp:1514
+msgid "Retract amount before wipe"
+msgstr "Retract amount before wipe"
+
+#: src/libslic3r/PrintConfig.cpp:1515
+msgid ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+msgstr ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+
+#: src/libslic3r/PrintConfig.cpp:1523
+msgid "Retract on layer change"
+msgstr "Retract on layer change"
+
+#: src/libslic3r/PrintConfig.cpp:1524
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr "This flag enforces a retraction whenever a Z move is done."
+
+#: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:1539
+msgid "Length"
+msgstr "Length"
+
+#: src/libslic3r/PrintConfig.cpp:1531
+msgid "Retraction Length"
+msgstr "Retraction Length"
+
+#: src/libslic3r/PrintConfig.cpp:1532
+msgid ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+msgstr ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:1544
+msgid "mm (zero to disable)"
+msgstr "mm (zero to disable)"
+
+#: src/libslic3r/PrintConfig.cpp:1540
+msgid "Retraction Length (Toolchange)"
+msgstr "Retraction Length (Toolchange)"
+
+#: src/libslic3r/PrintConfig.cpp:1541
+msgid ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+msgstr ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+
+#: src/libslic3r/PrintConfig.cpp:1550
+msgid "Lift Z"
+msgstr "Lift Z"
+
+#: src/libslic3r/PrintConfig.cpp:1551
+msgid ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+msgstr ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+
+#: src/libslic3r/PrintConfig.cpp:1559
+msgid "Above Z"
+msgstr "Above Z"
+
+#: src/libslic3r/PrintConfig.cpp:1560
+msgid "Only lift Z above"
+msgstr "Only lift Z above"
+
+#: src/libslic3r/PrintConfig.cpp:1561
+msgid ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+msgstr ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+
+#: src/libslic3r/PrintConfig.cpp:1569
+msgid "Below Z"
+msgstr "Below Z"
+
+#: src/libslic3r/PrintConfig.cpp:1570
+msgid "Only lift Z below"
+msgstr "Only lift Z below"
+
+#: src/libslic3r/PrintConfig.cpp:1571
+msgid ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+msgstr ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+
+#: src/libslic3r/PrintConfig.cpp:1580 src/libslic3r/PrintConfig.cpp:1589
+msgid "Extra length on restart"
+msgstr "Extra length on restart"
+
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+msgstr ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+
+#: src/libslic3r/PrintConfig.cpp:1590
+msgid ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+msgstr ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+
+#: src/libslic3r/PrintConfig.cpp:1598 src/libslic3r/PrintConfig.cpp:1599
+msgid "Retraction Speed"
+msgstr "Retraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:1600
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr "The speed for retractions (it only applies to the extruder motor)."
+
+#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1608
+msgid "Deretraction Speed"
+msgstr "Deretraction Speed"
+
+#: src/libslic3r/PrintConfig.cpp:1609
+msgid ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+msgstr ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+
+#: src/libslic3r/PrintConfig.cpp:1617
+msgid "Seam position"
+msgstr "Seam position"
+
+#: src/libslic3r/PrintConfig.cpp:1619
+msgid "Position of perimeters starting points."
+msgstr "Position of perimeters starting points."
+
+#: src/libslic3r/PrintConfig.cpp:1626
+msgid "Random"
+msgstr "Random"
+
+#: src/libslic3r/PrintConfig.cpp:1627
+msgid "Nearest"
+msgstr "Nearest"
+
+#: src/libslic3r/PrintConfig.cpp:1628
+msgid "Aligned"
+msgstr "Aligned"
+
+#: src/libslic3r/PrintConfig.cpp:1629
+msgid "Rear"
+msgstr "Rear"
+
+#: src/libslic3r/PrintConfig.cpp:1636
+msgid "Direction"
+msgstr "Direction"
+
+#: src/libslic3r/PrintConfig.cpp:1638
+msgid "Preferred direction of the seam"
+msgstr "Preferred direction of the seam"
+
+#: src/libslic3r/PrintConfig.cpp:1639
+msgid "Seam preferred direction"
+msgstr "Seam preferred direction"
+
+#: src/libslic3r/PrintConfig.cpp:1647
+msgid "Jitter"
+msgstr "Jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1649
+msgid "Seam preferred direction jitter"
+msgstr "Seam preferred direction jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1650
+msgid "Preferred direction of the seam - jitter"
+msgstr "Preferred direction of the seam - jitter"
+
+#: src/libslic3r/PrintConfig.cpp:1661
+msgid "USB/serial port for printer connection."
+msgstr "USB/serial port for printer connection."
+
+#: src/libslic3r/PrintConfig.cpp:1669
+msgid "Serial port speed"
+msgstr "Serial port speed"
+
+#: src/libslic3r/PrintConfig.cpp:1670
+msgid "Speed (baud) of USB/serial port for printer connection."
+msgstr "Speed (baud) of USB/serial port for printer connection."
+
+#: src/libslic3r/PrintConfig.cpp:1679
+msgid "Distance from object"
+msgstr "Distance from object"
+
+#: src/libslic3r/PrintConfig.cpp:1680
+msgid ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+msgstr ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+
+#: src/libslic3r/PrintConfig.cpp:1688
+msgid "Skirt height"
+msgstr "Skirt height"
+
+#: src/libslic3r/PrintConfig.cpp:1689
+msgid ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+msgstr ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+
+#: src/libslic3r/PrintConfig.cpp:1697
+msgid "Loops (minimum)"
+msgstr "Loops (minimum)"
+
+#: src/libslic3r/PrintConfig.cpp:1698
+msgid "Skirt Loops"
+msgstr "Skirt Loops"
+
+#: src/libslic3r/PrintConfig.cpp:1699
+msgid ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+msgstr ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+
+#: src/libslic3r/PrintConfig.cpp:1708
+msgid "Slow down if layer print time is below"
+msgstr "Slow down if layer print time is below"
+
+#: src/libslic3r/PrintConfig.cpp:1709
+msgid ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+msgstr ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+
+#: src/libslic3r/PrintConfig.cpp:1720
+msgid "Small perimeters"
+msgstr "Small perimeters"
+
+#: src/libslic3r/PrintConfig.cpp:1722
+msgid ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1732
+msgid "Solid infill threshold area"
+msgstr "Solid infill threshold area"
+
+#: src/libslic3r/PrintConfig.cpp:1734
+msgid ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+msgstr ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+
+#: src/libslic3r/PrintConfig.cpp:1735
+msgid "mm²"
+msgstr "mm²"
+
+#: src/libslic3r/PrintConfig.cpp:1742
+msgid "Solid infill extruder"
+msgstr "Solid infill extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1744
+msgid "The extruder to use when printing solid infill."
+msgstr "The extruder to use when printing solid infill."
+
+#: src/libslic3r/PrintConfig.cpp:1751
+msgid "Solid infill every"
+msgstr "Solid infill every"
+
+#: src/libslic3r/PrintConfig.cpp:1753
+msgid ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+msgstr ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1766
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1777
+msgid ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+msgstr ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+
+#: src/libslic3r/PrintConfig.cpp:1789
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr "Number of solid layers to generate on top and bottom surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:1796
+msgid "Spiral vase"
+msgstr "Spiral vase"
+
+#: src/libslic3r/PrintConfig.cpp:1797
+msgid ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+msgstr ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+
+#: src/libslic3r/PrintConfig.cpp:1806
+msgid "Temperature variation"
+msgstr "Temperature variation"
+
+#: src/libslic3r/PrintConfig.cpp:1807
+msgid ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+msgstr ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+
+#: src/libslic3r/PrintConfig.cpp:1818
+msgid ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+
+#: src/libslic3r/PrintConfig.cpp:1834
+msgid ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+msgstr ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+
+#: src/libslic3r/PrintConfig.cpp:1850
+msgid "Single Extruder Multi Material"
+msgstr "Single Extruder Multi Material"
+
+#: src/libslic3r/PrintConfig.cpp:1851
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr "The printer multiplexes filaments into a single hot end."
+
+#: src/libslic3r/PrintConfig.cpp:1857
+msgid "Prime all printing extruders"
+msgstr "Prime all printing extruders"
+
+#: src/libslic3r/PrintConfig.cpp:1858
+msgid ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+msgstr ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+
+#: src/libslic3r/PrintConfig.cpp:1864
+msgid "Generate support material"
+msgstr "Generate support material"
+
+#: src/libslic3r/PrintConfig.cpp:1866
+msgid "Enable support material generation."
+msgstr "Enable support material generation."
+
+#: src/libslic3r/PrintConfig.cpp:1871
+msgid "Auto generated supports"
+msgstr "Auto generated supports"
+
+#: src/libslic3r/PrintConfig.cpp:1873
+msgid ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+msgstr ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+
+#: src/libslic3r/PrintConfig.cpp:1880
+msgid "XY separation between an object and its support"
+msgstr "XY separation between an object and its support"
+
+#: src/libslic3r/PrintConfig.cpp:1882
+msgid ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+msgstr ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+
+#: src/libslic3r/PrintConfig.cpp:1893
+msgid "Pattern angle"
+msgstr "Pattern angle"
+
+#: src/libslic3r/PrintConfig.cpp:1895
+msgid ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+msgstr ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+
+#: src/libslic3r/PrintConfig.cpp:1906
+msgid ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+msgstr ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+
+#: src/libslic3r/PrintConfig.cpp:1913
+msgid "Contact Z distance"
+msgstr "Contact Z distance"
+
+#: src/libslic3r/PrintConfig.cpp:1915
+msgid ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+msgstr ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+
+#: src/libslic3r/PrintConfig.cpp:1923
+msgid "soluble"
+msgstr "soluble"
+
+#: src/libslic3r/PrintConfig.cpp:1924
+msgid "detachable"
+msgstr "detachable"
+
+#: src/libslic3r/PrintConfig.cpp:1929
+msgid "Enforce support for the first"
+msgstr "Enforce support for the first"
+
+#: src/libslic3r/PrintConfig.cpp:1931
+msgid ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+msgstr ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+
+#: src/libslic3r/PrintConfig.cpp:1937
+msgid "Enforce support for the first n layers"
+msgstr "Enforce support for the first n layers"
+
+#: src/libslic3r/PrintConfig.cpp:1943
+msgid "Support material/raft/skirt extruder"
+msgstr "Support material/raft/skirt extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1945
+msgid ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+msgstr ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+
+#: src/libslic3r/PrintConfig.cpp:1955
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:1964
+msgid "Interface loops"
+msgstr "Interface loops"
+
+#: src/libslic3r/PrintConfig.cpp:1966
+msgid ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:1972
+msgid "Support material/raft interface extruder"
+msgstr "Support material/raft interface extruder"
+
+#: src/libslic3r/PrintConfig.cpp:1974
+msgid ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+msgstr ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+
+#: src/libslic3r/PrintConfig.cpp:1982
+msgid "Interface layers"
+msgstr "Interface layers"
+
+#: src/libslic3r/PrintConfig.cpp:1984
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+msgstr ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+
+#: src/libslic3r/PrintConfig.cpp:1992
+msgid "Interface pattern spacing"
+msgstr "Interface pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:1994
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr "Spacing between interface lines. Set zero to get a solid interface."
+
+#: src/libslic3r/PrintConfig.cpp:2004
+msgid ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+msgstr ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+
+#: src/libslic3r/PrintConfig.cpp:2013
+msgid "Pattern"
+msgstr "Pattern"
+
+#: src/libslic3r/PrintConfig.cpp:2015
+msgid "Pattern used to generate support material."
+msgstr "Pattern used to generate support material."
+
+#: src/libslic3r/PrintConfig.cpp:2022
+msgid "Rectilinear grid"
+msgstr "Rectilinear grid"
+
+#: src/libslic3r/PrintConfig.cpp:2028
+msgid "Pattern spacing"
+msgstr "Pattern spacing"
+
+#: src/libslic3r/PrintConfig.cpp:2030
+msgid "Spacing between support material lines."
+msgstr "Spacing between support material lines."
+
+#: src/libslic3r/PrintConfig.cpp:2040
+msgid "Speed for printing support material."
+msgstr "Speed for printing support material."
+
+#: src/libslic3r/PrintConfig.cpp:2047
+msgid "Synchronize with object layers"
+msgstr "Synchronize with object layers"
+
+#: src/libslic3r/PrintConfig.cpp:2049
+msgid ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+msgstr ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+
+#: src/libslic3r/PrintConfig.cpp:2056
+msgid "Overhang threshold"
+msgstr "Overhang threshold"
+
+#: src/libslic3r/PrintConfig.cpp:2058
+msgid ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+msgstr ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+
+#: src/libslic3r/PrintConfig.cpp:2071
+msgid "With sheath around the support"
+msgstr "With sheath around the support"
+
+#: src/libslic3r/PrintConfig.cpp:2073
+msgid ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+msgstr ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+
+#: src/libslic3r/PrintConfig.cpp:2081
+msgid ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+msgstr ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+
+#: src/libslic3r/PrintConfig.cpp:2084
+msgid "Temperature"
+msgstr "Temperature"
+
+#: src/libslic3r/PrintConfig.cpp:2090
+msgid "Detect thin walls"
+msgstr "Detect thin walls"
+
+#: src/libslic3r/PrintConfig.cpp:2092
+msgid ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+msgstr ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+
+#: src/libslic3r/PrintConfig.cpp:2099
+msgid "Threads"
+msgstr "Threads"
+
+#: src/libslic3r/PrintConfig.cpp:2100
+msgid ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+msgstr ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+
+#: src/libslic3r/PrintConfig.cpp:2112
+msgid ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+msgstr ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+
+#: src/libslic3r/PrintConfig.cpp:2125
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+msgstr ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+
+#: src/libslic3r/PrintConfig.cpp:2137
+msgid ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+msgstr ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+
+#: src/libslic3r/PrintConfig.cpp:2149
+msgctxt "Layers"
+msgid "Top"
+msgstr "Top"
+
+#: src/libslic3r/PrintConfig.cpp:2151
+msgid "Number of solid layers to generate on top surfaces."
+msgstr "Number of solid layers to generate on top surfaces."
+
+#: src/libslic3r/PrintConfig.cpp:2153
+msgid "Top solid layers"
+msgstr "Top solid layers"
+
+#: src/libslic3r/PrintConfig.cpp:2159
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr "Speed for travel moves (jumps between distant extrusion points)."
+
+#: src/libslic3r/PrintConfig.cpp:2168
+msgid "Use firmware retraction"
+msgstr "Use firmware retraction"
+
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+msgstr ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:2176
+msgid "Use relative E distances"
+msgstr "Use relative E distances"
+
+#: src/libslic3r/PrintConfig.cpp:2177
+msgid ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+msgstr ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+
+#: src/libslic3r/PrintConfig.cpp:2184
+msgid "Use volumetric E"
+msgstr "Use volumetric E"
+
+#: src/libslic3r/PrintConfig.cpp:2185
+msgid ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+msgstr ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+
+#: src/libslic3r/PrintConfig.cpp:2196
+msgid "Enable variable layer height feature"
+msgstr "Enable variable layer height feature"
+
+#: src/libslic3r/PrintConfig.cpp:2197
+msgid ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+msgstr ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+
+#: src/libslic3r/PrintConfig.cpp:2204
+msgid "Wipe while retracting"
+msgstr "Wipe while retracting"
+
+#: src/libslic3r/PrintConfig.cpp:2205
+msgid ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+msgstr ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+
+#: src/libslic3r/PrintConfig.cpp:2213
+msgid ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+msgstr ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+
+#: src/libslic3r/PrintConfig.cpp:2220
+msgid "Purging volumes - load/unload volumes"
+msgstr "Purging volumes - load/unload volumes"
+
+#: src/libslic3r/PrintConfig.cpp:2221
+msgid ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below. "
+msgstr ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below. "
+
+#: src/libslic3r/PrintConfig.cpp:2228
+msgid "Purging volumes - matrix"
+msgstr "Purging volumes - matrix"
+
+#: src/libslic3r/PrintConfig.cpp:2229
+msgid ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools. "
+msgstr ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools. "
+
+#: src/libslic3r/PrintConfig.cpp:2239
+msgid "Position X"
+msgstr "Position X"
+
+#: src/libslic3r/PrintConfig.cpp:2240
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr "X coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Position Y"
+msgstr "Position Y"
+
+#: src/libslic3r/PrintConfig.cpp:2248
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr "Y coordinate of the left front corner of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2256
+msgid "Width of a wipe tower"
+msgstr "Width of a wipe tower"
+
+#: src/libslic3r/PrintConfig.cpp:2263
+msgid "Wipe tower rotation angle"
+msgstr "Wipe tower rotation angle"
+
+#: src/libslic3r/PrintConfig.cpp:2264
+msgid "Wipe tower rotation angle with respect to x-axis "
+msgstr "Wipe tower rotation angle with respect to x-axis "
+
+#: src/libslic3r/PrintConfig.cpp:2265
+msgid "degrees"
+msgstr "degrees"
+
+#: src/libslic3r/PrintConfig.cpp:2272
+msgid "Wipe into this object's infill"
+msgstr "Wipe into this object's infill"
+
+#: src/libslic3r/PrintConfig.cpp:2273
+msgid ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+msgstr ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+
+#: src/libslic3r/PrintConfig.cpp:2281
+msgid "Wipe into this object"
+msgstr "Wipe into this object"
+
+#: src/libslic3r/PrintConfig.cpp:2282
+msgid ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+msgstr ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+
+#: src/libslic3r/PrintConfig.cpp:2289
+msgid "Maximal bridging distance"
+msgstr "Maximal bridging distance"
+
+#: src/libslic3r/PrintConfig.cpp:2290
+msgid "Maximal distance between supports on sparse infill sections. "
+msgstr "Maximal distance between supports on sparse infill sections. "
+
+#: src/libslic3r/PrintConfig.cpp:2297
+msgid "XY Size Compensation"
+msgstr "XY Size Compensation"
+
+#: src/libslic3r/PrintConfig.cpp:2299
+msgid ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+msgstr ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+
+#: src/libslic3r/PrintConfig.cpp:2308
+msgid "Z offset"
+msgstr "Z offset"
+
+#: src/libslic3r/PrintConfig.cpp:2309
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+
+#: src/libslic3r/PrintConfig.cpp:2319
+msgid "Bed size X"
+msgstr "Bed size X"
+
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2327
+#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2343
+#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2359
+msgid "Dwarf"
+msgstr "Dwarf"
+
+#: src/libslic3r/PrintConfig.cpp:2326
+msgid "Bed size Y"
+msgstr "Bed size Y"
+
+#: src/libslic3r/PrintConfig.cpp:2333
+msgid "Picture resolution X"
+msgstr "Picture resolution X"
+
+#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2344
+msgid "px"
+msgstr "px"
+
+#: src/libslic3r/PrintConfig.cpp:2342
+msgid "Picture resolution Y"
+msgstr "Picture resolution Y"
+
+#: src/libslic3r/PrintConfig.cpp:2350 src/libslic3r/PrintConfig.cpp:2430
+#: src/libslic3r/PrintConfig.cpp:2431
+msgid "Exposure time"
+msgstr "Exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:2358
+msgid "Exposure time first layers"
+msgstr "Exposure time first layers"
+
+#: src/libslic3r/PrintConfig.cpp:2373
+msgid "Display width"
+msgstr "Display width"
+
+#: src/libslic3r/PrintConfig.cpp:2374
+msgid "Width of the display"
+msgstr "Width of the display"
+
+#: src/libslic3r/PrintConfig.cpp:2380
+msgid "Display height"
+msgstr "Display height"
+
+#: src/libslic3r/PrintConfig.cpp:2381
+msgid "Height of the display"
+msgstr "Height of the display"
+
+#: src/libslic3r/PrintConfig.cpp:2387
+msgid "Number of pixels in"
+msgstr "Number of pixels in"
+
+#: src/libslic3r/PrintConfig.cpp:2389
+msgid "Number of pixels in X"
+msgstr "Number of pixels in X"
+
+#: src/libslic3r/PrintConfig.cpp:2396
+msgid "Number of pixels in Y"
+msgstr "Number of pixels in Y"
+
+#: src/libslic3r/PrintConfig.cpp:2402
+msgid "Display orientation"
+msgstr "Display orientation"
+
+#: src/libslic3r/PrintConfig.cpp:2403
+msgid ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+msgstr ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+
+#: src/libslic3r/PrintConfig.cpp:2410
+msgid "Landscape"
+msgstr "Landscape"
+
+#: src/libslic3r/PrintConfig.cpp:2411
+msgid "Portrait"
+msgstr "Portrait"
+
+#: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2416
+msgid "Printer scaling correction"
+msgstr "Printer scaling correction"
+
+#: src/libslic3r/PrintConfig.cpp:2422 src/libslic3r/PrintConfig.cpp:2423
+msgid "Initial layer height"
+msgstr "Initial layer height"
+
+#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439
+msgid "Initial exposure time"
+msgstr "Initial exposure time"
+
+#: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2447
+msgid "Correction for expansion when printing"
+msgstr "Correction for expansion when printing"
+
+#: src/libslic3r/PrintConfig.cpp:2452 src/libslic3r/PrintConfig.cpp:2453
+msgid "Correction for expansion after curing"
+msgstr "Correction for expansion after curing"
+
+#: src/libslic3r/PrintConfig.cpp:2458
+msgid "SLA print material notes"
+msgstr "SLA print material notes"
+
+#: src/libslic3r/PrintConfig.cpp:2459
+msgid "You can put your notes regarding the SLA print material here."
+msgstr "You can put your notes regarding the SLA print material here."
+
+#: src/libslic3r/PrintConfig.cpp:2468 src/libslic3r/PrintConfig.cpp:2478
+msgid "Default SLA material profile"
+msgstr "Default SLA material profile"
+
+#: src/libslic3r/PrintConfig.cpp:2487
+msgid "Generate supports"
+msgstr "Generate supports"
+
+#: src/libslic3r/PrintConfig.cpp:2489
+msgid "Generate supports for the models"
+msgstr "Generate supports for the models"
+
+#: src/libslic3r/PrintConfig.cpp:2494
+msgid "Support head front diameter"
+msgstr "Support head front diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2496
+msgid "Diameter of the pointing side of the head"
+msgstr "Diameter of the pointing side of the head"
+
+#: src/libslic3r/PrintConfig.cpp:2503
+msgid "Support head penetration"
+msgstr "Support head penetration"
+
+#: src/libslic3r/PrintConfig.cpp:2505
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr "How much the pinhead has to penetrate the model surface"
+
+#: src/libslic3r/PrintConfig.cpp:2512
+msgid "Support head width"
+msgstr "Support head width"
+
+#: src/libslic3r/PrintConfig.cpp:2514
+msgid "Width from the back sphere center to the front sphere center"
+msgstr "Width from the back sphere center to the front sphere center"
+
+#: src/libslic3r/PrintConfig.cpp:2521
+msgid "Support pillar diameter"
+msgstr "Support pillar diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2523
+msgid "Diameter in mm of the support pillars"
+msgstr "Diameter in mm of the support pillars"
+
+#: src/libslic3r/PrintConfig.cpp:2530
+msgid "Support pillar connection mode"
+msgstr "Support pillar connection mode"
+
+#: src/libslic3r/PrintConfig.cpp:2531
+msgid ""
+"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+msgstr ""
+"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+
+#: src/libslic3r/PrintConfig.cpp:2540
+msgid "Zig-Zag"
+msgstr "Zig-Zag"
+
+#: src/libslic3r/PrintConfig.cpp:2541
+msgid "Cross"
+msgstr "Cross"
+
+#: src/libslic3r/PrintConfig.cpp:2542
+msgid "Dynamic"
+msgstr "Dynamic"
+
+#: src/libslic3r/PrintConfig.cpp:2546
+msgid "Pillar widening factor"
+msgstr "Pillar widening factor"
+
+#: src/libslic3r/PrintConfig.cpp:2548
+msgid ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+msgstr ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+
+#: src/libslic3r/PrintConfig.cpp:2557
+msgid "Support base diameter"
+msgstr "Support base diameter"
+
+#: src/libslic3r/PrintConfig.cpp:2559
+msgid "Diameter in mm of the pillar base"
+msgstr "Diameter in mm of the pillar base"
+
+#: src/libslic3r/PrintConfig.cpp:2566
+msgid "Support base height"
+msgstr "Support base height"
+
+#: src/libslic3r/PrintConfig.cpp:2568
+msgid "The height of the pillar base cone"
+msgstr "The height of the pillar base cone"
+
+#: src/libslic3r/PrintConfig.cpp:2575
+msgid "Critical angle"
+msgstr "Critical angle"
+
+#: src/libslic3r/PrintConfig.cpp:2577
+msgid "The default angle for connecting support sticks and junctions."
+msgstr "The default angle for connecting support sticks and junctions."
+
+#: src/libslic3r/PrintConfig.cpp:2584
+msgid "Max bridge length"
+msgstr "Max bridge length"
+
+#: src/libslic3r/PrintConfig.cpp:2586
+msgid "The max length of a bridge"
+msgstr "The max length of a bridge"
+
+#: src/libslic3r/PrintConfig.cpp:2593
+msgid "Object elevation"
+msgstr "Object elevation"
+
+#: src/libslic3r/PrintConfig.cpp:2595
+msgid "How much the supports should lift up the supported object."
+msgstr "How much the supports should lift up the supported object."
+
+#: src/libslic3r/PrintConfig.cpp:2602
+msgid "Density on horizontal surfaces"
+msgstr "Density on horizontal surfaces"
+
+#: src/libslic3r/PrintConfig.cpp:2604
+msgid ""
+"How many support points (approximately) should be placed on horizontal "
+"surface."
+msgstr ""
+"How many support points (approximately) should be placed on horizontal "
+"surface."
+
+#: src/libslic3r/PrintConfig.cpp:2605 src/libslic3r/PrintConfig.cpp:2614
+msgid "points per square dm"
+msgstr "points per square dm"
+
+#: src/libslic3r/PrintConfig.cpp:2611
+msgid "Density on surfaces at 45 degrees"
+msgstr "Density on surfaces at 45 degrees"
+
+#: src/libslic3r/PrintConfig.cpp:2613
+msgid ""
+"How many support points (approximately) should be placed on surface sloping "
+"at 45 degrees."
+msgstr ""
+"How many support points (approximately) should be placed on surface sloping "
+"at 45 degrees."
+
+#: src/libslic3r/PrintConfig.cpp:2620
+msgid "Minimal support point height"
+msgstr "Minimal support point height"
+
+#: src/libslic3r/PrintConfig.cpp:2622
+msgid "No support points will be placed lower than this value from the bottom."
+msgstr ""
+"No support points will be placed lower than this value from the bottom."
+
+#: src/libslic3r/PrintConfig.cpp:2629
+msgid "Use pad"
+msgstr "Use pad"
+
+#: src/libslic3r/PrintConfig.cpp:2631
+msgid "Add a pad underneath the supported model"
+msgstr "Add a pad underneath the supported model"
+
+#: src/libslic3r/PrintConfig.cpp:2636
+msgid "Pad wall thickness"
+msgstr "Pad wall thickness"
+
+#: src/libslic3r/PrintConfig.cpp:2645
+msgid "Pad wall height"
+msgstr "Pad wall height"
+
+#: src/libslic3r/PrintConfig.cpp:2654
+msgid "Max merge distance"
+msgstr "Max merge distance"
+
+#: src/libslic3r/PrintConfig.cpp:2663
+msgid "Pad edge radius"
+msgstr "Pad edge radius"
+
+#: src/libslic3r/PrintConfig.cpp:3017
+msgid "Cut model at the given Z."
+msgstr "Cut model at the given Z."
+
+#: src/libslic3r/PrintConfig.cpp:3022
+msgid "Dont arrange"
+msgstr "Dont arrange"
+
+#: src/libslic3r/PrintConfig.cpp:3023
+msgid ""
+"Don't arrange the objects on the build plate. The model coordinates define "
+"the absolute positions on the build plate. The option --center will be "
+"ignored."
+msgstr ""
+"Don't arrange the objects on the build plate. The model coordinates define "
+"the absolute positions on the build plate. The option --center will be "
+"ignored."
+
+#: src/libslic3r/PrintConfig.cpp:3030
+msgid "User data directory"
+msgstr "User data directory"
+
+#: src/libslic3r/PrintConfig.cpp:3031
+msgid ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+msgstr ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+
+#: src/libslic3r/PrintConfig.cpp:3038
+msgid "Export 3MF"
+msgstr "Export 3MF"
+
+#: src/libslic3r/PrintConfig.cpp:3039
+msgid "Slice the model and export slices as 3MF."
+msgstr "Slice the model and export slices as 3MF."
+
+#: src/libslic3r/PrintConfig.cpp:3044
+msgid "Slice"
+msgstr "Slice"
+
+#: src/libslic3r/PrintConfig.cpp:3045
+msgid "Slice the model and export gcode."
+msgstr "Slice the model and export gcode."
+
+#: src/libslic3r/PrintConfig.cpp:3050
+msgid "Help"
+msgstr "Help"
+
+#: src/libslic3r/PrintConfig.cpp:3051
+msgid "Show this help."
+msgstr "Show this help."
+
+#: src/libslic3r/PrintConfig.cpp:3056
+msgid "Use GUI"
+msgstr "Use GUI"
+
+#: src/libslic3r/PrintConfig.cpp:3057
+msgid ""
+"Forces the GUI launch instead of command line slicing (if you supply a model "
+"file, it will be loaded into the plater)"
+msgstr ""
+"Forces the GUI launch instead of command line slicing (if you supply a model "
+"file, it will be loaded into the plater)"
+
+#: src/libslic3r/PrintConfig.cpp:3063
+msgid "Output Model Info"
+msgstr "Output Model Info"
+
+#: src/libslic3r/PrintConfig.cpp:3064
+msgid "Write information about the model to the console."
+msgstr "Write information about the model to the console."
+
+#: src/libslic3r/PrintConfig.cpp:3069
+msgid "Load config file"
+msgstr "Load config file"
+
+#: src/libslic3r/PrintConfig.cpp:3070
+msgid ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+msgstr ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+
+#: src/libslic3r/PrintConfig.cpp:3075
+msgid "Do not use GUI"
+msgstr "Do not use GUI"
+
+#: src/libslic3r/PrintConfig.cpp:3076
+msgid ""
+"Forces the command line slicing instead of gui. This takes precedence over --"
+"gui if both are present."
+msgstr ""
+"Forces the command line slicing instead of gui. This takes precedence over --"
+"gui if both are present."
+
+#: src/libslic3r/PrintConfig.cpp:3081
+msgid "Output File"
+msgstr "Output File"
+
+#: src/libslic3r/PrintConfig.cpp:3082
+msgid ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+msgstr ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+
+#: src/libslic3r/PrintConfig.cpp:3088
+msgid "Rotation angle around the Z axis in degrees (0-360, default: 0)."
+msgstr "Rotation angle around the Z axis in degrees (0-360, default: 0)."
+
+#: src/libslic3r/PrintConfig.cpp:3093
+msgid "Rotate around X"
+msgstr "Rotate around X"
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid "Rotation angle around the X axis in degrees (0-360, default: 0)."
+msgstr "Rotation angle around the X axis in degrees (0-360, default: 0)."
+
+#: src/libslic3r/PrintConfig.cpp:3099
+msgid "Rotate around Y"
+msgstr "Rotate around Y"
+
+#: src/libslic3r/PrintConfig.cpp:3100
+msgid "Rotation angle around the Y axis in degrees (0-360, default: 0)."
+msgstr "Rotation angle around the Y axis in degrees (0-360, default: 0)."
+
+#: src/libslic3r/PrintConfig.cpp:3105
+msgid "Save config file"
+msgstr "Save config file"
+
+#: src/libslic3r/PrintConfig.cpp:3106
+msgid "Save configuration to the specified file."
+msgstr "Save configuration to the specified file."
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Scaling factor (default: 1)."
+msgstr "Scaling factor (default: 1)."
+
+#: src/libslic3r/PrintConfig.cpp:3125
+msgid "Print center"
+msgstr "Print center"
+
+#: src/libslic3r/PrintConfig.cpp:3126
+msgid "Center the print around the given center (default: 100, 100)."
+msgstr "Center the print around the given center (default: 100, 100)."
+
+#: src/libslic3r/GCode/PreviewData.cpp:176
+msgid "Mixed"
+msgstr "Mixed"
+
+#: src/libslic3r/GCode/PreviewData.cpp:396
+msgid "Height (mm)"
+msgstr "Height (mm)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:398
+msgid "Width (mm)"
+msgstr "Width (mm)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:400
+msgid "Speed (mm/s)"
+msgstr "Speed (mm/s)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:402
+msgid "Volumetric flow rate (mm3/s)"
+msgstr "Volumetric flow rate (mm3/s)"
+
+#: src/libslic3r/GCode/PreviewData.cpp:491
+msgid "Default print color"
+msgstr "Default print color"
+
+#: src/libslic3r/GCode/PreviewData.cpp:495
+#, c-format
+msgid "up to %.2f mm"
+msgstr "up to %.2f mm"
+
+#: src/libslic3r/GCode/PreviewData.cpp:499
+#, c-format
+msgid "above %.2f mm"
+msgstr "above %.2f mm"
+
+#: src/libslic3r/GCode/PreviewData.cpp:504
+#, c-format
+msgid "%.2f - %.2f mm"
+msgstr "%.2f - %.2f mm"
diff --git a/resources/localization/he_IL/SuperSlicer.mo b/resources/localization/he_IL/SuperSlicer.mo
new file mode 100644
index 00000000000..fd725c0847f
Binary files /dev/null and b/resources/localization/he_IL/SuperSlicer.mo differ
diff --git a/resources/localization/he_IL/SuperSlicer.po b/resources/localization/he_IL/SuperSlicer.po
new file mode 100644
index 00000000000..0b626d57082
--- /dev/null
+++ b/resources/localization/he_IL/SuperSlicer.po
@@ -0,0 +1,10850 @@
+#: src/libslic3r/PrintConfig.cpp:1746 src/libslic3r/PrintConfig.cpp:3606
+msgid ""
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:298
+msgid "Portions copyright"
+msgstr "חלקים בזכויות יוצרים"
+
+#: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261
+msgid "Copyright"
+#: src/slic3r/GUI/AboutDialog.cpp:134
+msgstr "זכויות יוצרים"
+msgid "License agreements of all following programs (libraries) are part of application license agreement"
+msgstr "הסכמי רישיון של כל התוכניות הבאות (ספריות) הם חלק מהסכם הרישיון ליישום"
+#, possible-c-format
+msgid "About %s"
+#: src/slic3r/GUI/MainFrame.cpp:153
+msgstr "אודות %s"
+msgid "Version"
+#: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:243
+msgstr "גרסה"
+msgid "is licensed under the"
+msgstr "מורשה תחת"
+
+#: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:243
+msgid "GNU Affero General Public License, version 3"
+msgstr "רישיון ציבורי כללי של GNU Affero, גרסה 3"
+
+#: src/slic3r/GUI/AboutDialog.cpp:265
+msgid "SuperSlicer is based on PrusaSlicer which is based on Slic3r by Alessandro Ranellucci and the RepRap community."
+msgstr "SuperSlicer מבוססת על PrusaSlicer המבוססת על Slic3r על ידי אלסנדרו רנלוצ'י וקהילת RepRap."
+
+#: src/slic3r/GUI/AboutDialog.cpp:266
+msgid "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others."
+msgstr "תרומות מאת הנריק בריקס אנדרסן, ניקולה דנדרמון, מארק הינדס, פטר לדווינה, ג'וזף לנוקס, י 'ספיר, מייק שלדרייק, ווייטק בובניק, דורנד רמי ורבים אחרים."
+#, possible-c-format
+msgid "%s has encountered an error. It was likely caused by running out of memory. If you are sure you have enough RAM on your system, this may also be a bug and we would be glad if you reported it."
+msgstr "% s נתקל בשגיאה. זה נגרם ככל הנראה בגלל שנגמר הזיכרון. אם אתה בטוח שיש לך מספיק זיכרון RAM במערכת שלך, זה יכול להיות גם באג ונשמח אם תדווח עליו."
+#, possible-c-format
+msgid "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\nError message: %1%"
+msgstr "העתקה של G-Code זמני אל G-Code הפלט נכשלה. ייתכן שכרטיס הזיכרון נעול לכתיבה?\n"
+"הודעת שגיאה:%1%"
+#, possible-c-format
+msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp."
+msgstr "העתקה של G-Code זמני אל G-Code הפלט נכשלה. ייתכן שיש בעיה במכשיר היעד. נסה לייצא שוב או להשתמש במכשיר אחר. קובץ G-Code הפלט התקול נמצא ב %1%.tmp."
+#, possible-c-format
+msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again."
+msgstr "שינוי שם הG-Code לאחר העתקתו לתיקיית היעד נכשלה הנתיב הנוכחי הוא%1% .tmp. אנא נסה לייצא שוב."
+#, possible-c-format
+msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp."
+msgstr "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. קובץ G-Code הפלט נמצא בנתיב  %2%.tmp."
+#, possible-c-format
+msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp."
+msgstr "העתקה של G-Code זמני הסתיימה אבל קובץ היעד לא ניתן לפתיחה במהלך הבדיקה. קובץ פלט G-Code נמצא בנתיב %1%.tmp."
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
+msgid "Unknown error occured during exporting G-code."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:534
+msgstr "אירעה שגיאה לא ידוע במהלך ייצוא הG-Code"
+msgid "Running post-processing scripts"
+msgstr ""
+#, possible-c-format
+msgid "G-code file exported to %1%"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:240
+msgstr "קובץ הG-Code מיוצא אל %1%"
+msgid "Slicing complete"
+msgstr "החיתוך הושלם"
+#, possible-c-format
+msgid "Masked SLA file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:537
+msgid "Copying of the temporary G-code to the output G-code failed"
+msgstr "העתקה של G-Code זמני אל G-Code הפלט נכשלה."
+#, possible-c-format
+msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162
+msgstr "תזמון העלאה ל '%1%' ראה חלון -> תור העלאת הדפסה"
+msgid "Size"
+msgstr "גודל"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:94
+msgid "Origin"
+msgstr "מוצא"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1387
+msgid "Diameter"
+msgstr "קוטר"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:110
+msgid "Size in X and Y of the rectangular plate."
+msgstr "גודל ב X & Y עבור משטח ההדפסה המלבני"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:121
+msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle."
+#: src/libslic3r/PrintConfig.cpp:4821 src/libslic3r/PrintConfig.cpp:4845
+msgstr "מרחק של ראשית הצירים מהפינה הקדמית השמאלית"
+msgid "mm"
+msgstr "מ\"מ"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:131
+msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center."
+msgstr "קוטר מיטת ההדפסה. ההנחה היא שראשית הצירים (0,0) נמצא במרכז."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:141
+msgid "Rectangular"
+msgstr "מלבני"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:142
+msgid "Circular"
+#: src/libslic3r/ExtrusionEntity.cpp:330
+msgstr "מעוגל"
+msgid "Custom"
+msgstr "מותאים אישית"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:145
+msgid "Invalid"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
+msgstr "לא תקין"
+msgid "Shape"
+msgstr "צורה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:243
+msgid "Load shape from STL..."
+msgstr "טען צורה מ- STL ..."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1868
+msgid "Settings"
+msgstr "הגדרות"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:315
+msgid "Texture"
+msgstr "מרקם"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
+msgid "Load..."
+#: src/slic3r/GUI/Tab.cpp:3533
+msgstr "טעינה..."
+msgid "Remove"
+msgstr "הסרה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
+msgid "Not found:"
+msgstr "לא נמצא:"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:395
+msgid "Model"
+msgstr "מוֹדֵל"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:563
+msgid "Choose an STL file to import bed shape from:"
+#: src/slic3r/GUI/BedShapeDialog.cpp:642
+msgstr "בחר קובץ STL ממנו ניתן לייבא צורת מיטה:"
+msgid "Invalid file format."
+msgstr "קובץ בפורמט שאינו נתמך"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:581
+msgid "Error! Invalid model"
+msgstr "שגיאה! דגם לא חוקי"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:589
+msgid "The selected file contains no geometry."
+msgstr "הקובץ הנבחר אינו מכיל גיאומטריה"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:593
+msgid "The selected file contains several disjoint areas. This is not supported."
+msgstr "הקובץ שנבחר מכיל כמה אזורים נפרדים. זה לא נתמך."
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:608
+msgid "Choose a file to import bed texture from (PNG/SVG):"
+msgstr "בחר קובץ"
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:631
+msgid "Choose an STL file to import bed model from:"
+msgstr "בחר קובץ STL לייבא ממנו צורת מיטה:"
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1314
+msgid "Bed Shape"
+msgstr "צורת מיטה"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:55
+msgid "Network lookup"
+msgstr "חיפוש ברשת"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:72
+msgid "Address"
+msgstr "כתובת"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:73
+msgid "Hostname"
+msgstr "שם מארח"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:74
+msgid "Service name"
+msgstr "שם השירות"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:76
+msgid "OctoPrint version"
+msgstr "גרסת OctoPrint"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:218
+msgid "Searching for devices"
+msgstr "מחפש מכשירים"
+
+#: src/slic3r/GUI/BonjourDialog.cpp:225
+msgid "Finished"
+msgstr "הסתיים"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:16
+msgid "Buttons And Text Colors Description"
+msgstr "כפתורים וצבעי טקסט תיאור"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:36
+msgid "Value is the same as the system value"
+msgstr "הערך זהה לערך המערכת"
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:53
+msgid "Value was changed and is not equal to the system value or the last saved preset"
+msgstr "הערך השתנה ואינו שווה לערך המערכת או להגדרה המוגדרת מראש שנשמרה"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:47
+msgid "Zero layer height is not valid.\n\nThe layer height will be reset to 0.01."
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgstr "שכבה בגובה 0 אינה חוקית\n"
+"\n"
+"גובה השכבה יאופס ל 0.01."
+msgid "Layer height"
+msgstr "גובה השכבה"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:59
+msgid "Zero first layer height is not valid.\n\nThe first layer height will be reset to 0.01."
+msgstr "שכבה ראשונה בגובה 0 אינה חוקית\n"
+"\n"
+"גובה השכבה הראשונה יאופס ל 0.01."
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:1693
+msgid "First layer height"
+msgstr "גובה שכבה ראשונה"
+#, possible-c-format
+msgid "The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters'"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:92
+msgid "Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr "האם לשנות את ההגדרות הללו על מנת לאפשר מצב אגרטל ספירלי?"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:93
+msgid "Spiral Vase"
+msgstr "אגרטל ספירלי"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:143
+msgid "The Wipe Tower currently supports the non-soluble supports only\nif they are printed with the current extruder without triggering a tool change.\n(both support_material_extruder and support_material_interface_extruder need to be set to 0)."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:147
+msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
+#: src/slic3r/GUI/ConfigManipulation.cpp:226
+msgstr ""
+msgid "Wipe Tower"
+msgstr "מגדל ניגוב"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:176
+msgid "For the Wipe Tower to work with the soluble supports, the support layers\nneed to be synchronized with the object layers."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:179
+msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+#, possible-c-format
+msgid "Did you forgot to put a '%' in the "
+msgstr "האם שכחת לשים ,%' i ב- "
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:222
+msgid " field? it's currently set to "
+msgstr " שדה? כרגע הוא מוגדר ל- "
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:223
+msgid " mm."
+msgstr " מ\"מ."
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:225
+msgid "Shall I add the '%'?"
+msgstr "האם להוסיף את '%'?"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:257
+msgid "It's not possible to use a bigger value for the brim offset than the brim width, as it won't extrude anything. Brim offset have to be lower than the brim width."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:260
+msgid "Shall I switch the brim offset to 0?"
+msgstr "האם לשנות את היסט השוליים ל0?"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:261
+msgid "Brim configuration"
+msgstr "הגדרות שוליים"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:279
+msgid "Supports work better, if the following feature is enabled:\n- overhangs with bridge speed & fan"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:282
+msgid "Shall I adjust those settings for supports?"
+msgstr "האם לעדכן את ההגדרות הללו עבור תמיכות?"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:283
+msgid "Support Generator"
+msgstr "מחולל תמיכות"
+#, possible-c-format
+msgid "The %1% infill pattern is not supposed to work at 100%% density."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:334
+msgid "Shall I switch to rectilinear fill pattern?"
+#: src/libslic3r/PrintConfig.cpp:1953
+msgstr "האם אעבור למילוי תבנית ישרה?"
+msgid "Infill"
+msgstr "מילוי"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:502
+msgid "Head penetration should not be greater than the head width."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:504
+msgid "Invalid Head penetration"
+msgstr "חדירת ראש לא חוקית"
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:515
+msgid "Pinhead diameter should be smaller than the pillar diameter."
+msgstr "קוטר הראש צריך להיות קטן מקוטר העמוד."
+
+#: src/slic3r/GUI/ConfigManipulation.cpp:517
+msgid "Invalid pinhead diameter"
+msgstr "קוטר הראש לא חוקי"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
+msgid "Upgrade"
+msgstr "שדרוג"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
+msgid "Downgrade"
+msgstr "שנמוך"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
+msgid "Before roll back"
+#: src/libslic3r/PrintConfig.cpp:174
+msgstr ""
+msgid "User"
+#: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:270
+msgstr "משתמש"
+msgid "Unknown"
+msgstr "לא ידוע"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
+msgid "Active"
+msgstr "פעיל"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
+msgid "SuperSlicer version"
+msgstr "גרסת SuperSlicer"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1470
+msgid "print"
+msgstr "הדפס"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
+msgid "filaments"
+msgstr "חומרים"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1472
+msgid "SLA print"
+#: src/libslic3r/Preset.cpp:1473
+msgstr "הדפסת SLA"
+msgid "SLA material"
+msgstr "חומר SLA"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1474
+msgid "printer"
+msgstr "מדפסת"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1305
+msgid "vendor"
+msgstr "ספק"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
+msgid "version"
+msgstr "גרסה"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
+msgid "min SuperSlicer version"
+msgstr "גרסת SuperSlicer מינימאלית"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+msgid "max SuperSlicer version"
+msgstr "גרסת SuperSlicer מקסימלית"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "model"
+msgstr "דגם"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "variants"
+msgstr "שינויים"
+#, possible-c-format
+msgid "Incompatible with this %s"
+msgstr "אינו תואם ל-% s זה"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86
+msgid "Activate"
+msgstr "להפעיל"
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112
+msgid "Configuration Snapshots"
+msgstr "הגדרות תמונת מצב"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:241
+msgid "nozzle"
+msgstr "זרבובית"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:245
+msgid "Alternate nozzles:"
+msgstr "זרבוביות חליפיות:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:309
+msgid "All standard"
+msgstr "כל הרגילים"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:309
+msgid "Standard"
+#: src/slic3r/GUI/Tab.cpp:3614 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
+msgstr "רגיל"
+msgid "All"
+#: src/slic3r/GUI/Plater.cpp:501
+msgstr "הכל"
+msgid "None"
+msgstr "כלום"
+#, possible-c-format
+msgid "Welcome to the %s Configuration Assistant"
+msgstr "ברוך הבא ל-% s עוזר התצורה"
+#, possible-c-format
+msgid "Welcome to the %s Configuration Wizard"
+msgstr "ברוך הבא לאשף התצורה של% s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:451
+msgid "Welcome"
+msgstr "ברוכים הבאים"
+#, possible-c-format
+msgid "Hello, welcome to %s! This %s helps you with the initial configuration; just a few settings and you will be ready to print."
+msgstr "שלום, ברוך הבא ל-% s! % S זה עוזר לך בתצורה הראשונית; רק כמה הגדרות ותהיה מוכן להדפסה."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:458
+msgid "Remove user profiles (a snapshot will be taken beforehand)"
+msgstr "הסר פרופילי משתמש (תמונת מצב תילקח מראש)"
+#, possible-c-format
+msgid "%s Family"
+msgstr "המשפחת % s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:595
+msgid "Printer:"
+msgstr "מדפסת:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:597
+msgid "Vendor:"
+msgstr "ספק:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:598
+msgid "Profile:"
+#: src/slic3r/GUI/ConfigWizard.cpp:881 src/slic3r/GUI/ConfigWizard.cpp:1018
+msgstr "פרופיל:"
+msgid "(All)"
+msgstr "(הכל)"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:699
+msgid "Filaments marked with <b>*</b> are <b>not</b> compatible with some installed printers."
+msgstr "חומרים המסומנים ב <b> * </ b> אינם <b> תואמים </ b> עם כמה מדפסות מותקנות."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:702
+msgid "All installed printers are compatible with the selected filament."
+msgstr "כל המדפסות המותקנות תואמות לחומרים הנבחרים"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:722
+msgid "Only the following installed printers are compatible with the selected filament:"
+msgstr "מתוך המדפסות שמותקנות, רק הבאות תואמות לחומרים שנבחרו:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1108
+msgid "Custom Printer Setup"
+msgstr "הגדרת מדפסת מותאמת אישית"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1108
+msgid "Custom Printer"
+msgstr "מדפסת מותאמת אישית"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1110
+msgid "Define a custom printer profile"
+msgstr "הגדר פרופיל מדפסת מותאם אישית"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1112
+msgid "Custom profile name:"
+msgstr "שם פרופיל מותאם אישית:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1137
+msgid "Automatic updates"
+msgstr "עדכונים אוטומטיים"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1137
+msgid "Updates"
+msgstr "עדכונים"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1145 src/slic3r/GUI/Preferences.cpp:73
+msgid "Check for application updates"
+msgstr "בדוק אם קיימים עדכוני תוכנה"
+#, possible-c-format
+msgid "If enabled, %s checks for new application versions online. When a new version becomes available, a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
+msgstr "אם מופעלת,% s בודק גרסאות תוכנה חדשות באופן מקוון. כאשר גרסה חדשה הופכת לזמינה, הודעה מוצגת בהפעלה הבאה של היישום (אף פעם לא במהלך השימוש בתוכנית). זהו מנגנון התראה בלבד, לא מתבצעת התקנה אוטומטית."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:89
+msgid "Update built-in Presets automatically"
+msgstr ""
+#, possible-c-format
+msgid "If enabled, %s downloads updates of built-in system presets in the background.These updates are downloaded into a separate temporary location.When a new preset version becomes available it is offered at application startup."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1162
+msgid "Updates are never applied without user's consent and never overwrite user's customized settings."
+msgstr "העדכונים לעולם אינם מיושמים ללא הסכמת המשתמש ולעולם לא יחליפו את ההגדרות המותאמות אישית של המשתמש."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1167
+msgid "Additionally a backup snapshot of the whole configuration is created before an update is applied."
+#: src/slic3r/GUI/Plater.cpp:3936 src/slic3r/GUI/Plater.cpp:3967
+msgstr "בנוסף נוצרת תמונת מצב גיבוי של כל ההגדרות לפני החלת עדכון."
+msgid "Reload from disk"
+msgstr "טכינה "
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1177
+msgid "Export full pathnames of models and parts sources into 3mf and amf files"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1181
+msgid "If enabled, allows the Reload from disk command to automatically find and load the files when invoked.\nIf not enabled, the Reload from disk command will ask to select each file using an open file dialog."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
+msgid "View mode"
+msgstr "מצב צפייה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1191
+msgid "SuperSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively."
+msgstr "ממשקי המשתמש של SuperSlicer מגיעים בשלוש גרסאות:\n"
+"פשוט, מתקדם ומומחה.\n"
+"המצב הפשוט מציג רק את ההגדרות הנפוצות ביותר הרלוונטיות להדפסת תלת מימד רגילה. שני האחרים מציעים כיוונון עדין ומתוחכם בהדרגה, הם מתאימים למשתמשים מתקדמים ומומחים בהתאמה."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1196
+msgid "Simple mode"
+msgstr "מצב פשוט"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1197
+msgid "Advanced mode"
+msgstr "מצב מתקדם"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1198
+msgid "Expert mode"
+msgstr "מצב מומחה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1204
+msgid "The size of the object can be specified in inches"
+msgstr "ניתן לציין את גודל האובייקט באינץ '"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1205
+msgid "Use inches"
+msgstr "השתמש ביחידות אימפריאליות"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1240
+msgid "Other Vendors"
+msgstr "ספקים אחרים"
+#, possible-c-format
+msgid "Pick another vendor supported by %s"
+msgstr "בחר ספק אחר הנתמך על ידי%%s"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
+msgid "Firmware Type"
+msgstr "סוג קשוחה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1276
+msgid "Firmware"
+msgstr "קשוחה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1280
+msgid "Choose the type of firmware used by your printer."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1314
+msgid "Bed Shape and Size"
+msgstr "צורת וגודל המיטה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1317
+msgid "Set the shape of your printer's bed."
+msgstr "הגדר את צורת מיטת ההדפסה שלך."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
+msgid "Filament and Nozzle Diameters"
+msgstr "קוטר זרבובית וחומר גלם"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1337
+msgid "Print Diameters"
+msgstr "קוטר ההדפסה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1351
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr "הזן את קוטר זרבובית בקצה החם של מדפסתך."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1354
+msgid "Nozzle Diameter:"
+msgstr "קוטר זרבובית:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1364
+msgid "Enter the diameter of your filament."
+msgstr "הזן את קוטר החומר שלך."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1365
+msgid "Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+msgstr "נדרש דיוק טוב, לכן השתמש בקאליפר ובצע מדידות מרובות לאורך החומר, ואז חשב את הממוצע."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1368
+msgid "Filament Diameter:"
+msgstr "קוטר חומר:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
+msgid "Nozzle and Bed Temperatures"
+msgstr "טמפרטורות זרבובית ומיטה."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1397
+msgid "Temperatures"
+msgstr "טמפרטורות"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
+msgid "Enter the temperature needed for extruding your filament."
+msgstr "הזן את הטמפרטורה הדרושה להפקת החומרים שלך."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1414
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr "כלל אצבע הוא 160 עד 230 מעלות צלזיוס עבור PLA, ו- 215 עד 250 מעלות צלזיוס עבור ABS."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1417
+msgid "Extrusion Temperature:"
+#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:3568
+msgstr "טמפרטורת הדפסה:"
+msgid "°C"
+msgstr "מעלות צלזיוס"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1427
+msgid "Enter the bed temperature needed for getting your filament to stick to your heated bed."
+msgstr "הזן את טמפרטורת המיטה הדרושה כדי לגרום לחומר להיצמד למיטה המחוממת."
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1428
+msgid "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed."
+msgstr "כלל אצבע הוא 60 מעלות צלזיוס ל- PLA ו- 110 מעלות צלזיוס ל- ABS. השאר 0 במידה ואין מיטה מחוממת"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1431
+msgid "Bed Temperature:"
+msgstr "טמפרטורת המיטה:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2586
+msgid "Filaments"
+msgstr "חומרים"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:2588
+msgid "SLA Materials"
+msgstr "חומרי SLA"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1934
+msgid "FFF Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1939
+msgid "SLA Technology Printers"
+#: src/slic3r/GUI/DoubleSlider.cpp:2366 src/slic3r/GUI/GUI.cpp:259
+msgstr ""
+msgid "Notice"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2278
+msgid "The following FFF printer models have no filament selected:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2282
+msgid "Do you want to select default filaments for these FFF printer models?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2296
+msgid "The following SLA printer models have no materials selected:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2300
+msgid "Do you want to select default SLA materials for these printer models?"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2529
+msgid "Select all standard printers in this page"
+msgstr "בחר את כל המדפסות הרגילות בעמוד זה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2532
+msgid "< &Back"
+msgstr "<& חזרה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2533
+msgid "&Next >"
+msgstr "& הבא>"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2534
+msgid "&Finish"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
+msgstr "&סיום"
+msgid "Cancel"
+msgstr "ביטול"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2549
+msgid "Prusa FFF Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2552
+msgid "Prusa MSLA Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2586
+msgid "Filament Profiles Selection"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
+msgstr "בחירת פרופילי חומרים"
+msgid "Type:"
+msgstr "סוג:"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2588
+msgid "SLA Material Profiles Selection"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2695
+msgid "Configuration Assistant"
+msgstr "עוזר התצורה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2696
+msgid "Configuration &Assistant"
+msgstr "הגדרות ותצורה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2698
+msgid "Configuration Wizard"
+msgstr "אשף תצורה"
+
+#: src/slic3r/GUI/ConfigWizard.cpp:2699
+msgid "Configuration &Wizard"
+msgstr "אשף התצורה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:104
+msgid "Place bearings in slots and resume printing"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1276
+msgid "One layer mode"
+msgstr "מצב שכבה בודדת"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1278
+msgid "Discard all custom changes"
+msgstr "מחק את כל השינויים המותאמים אישית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1283 src/slic3r/GUI/DoubleSlider.cpp:2076
+msgid "Jump to move"
+msgstr ""
+#, possible-c-format
+msgid "Jump to height %s Set ruler mode\n or Set extruder sequence for the entire print"
+msgstr ""
+#, possible-c-format
+msgid "Jump to height %s or Set ruler mode"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1295
+msgid "Edit current color - Right click the colored slider segment"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1305
+msgid "Print mode"
+msgstr "מצב הדפסה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1319
+msgid "Add extruder change - Left click"
+msgstr "הוסף שינוי ראש ההדפסה - לחיצה שמאלית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1321
+msgid "Add color change - Left click for predefined color or Shift + Left click for custom color selection"
+msgstr "הוסף שינוי צבע - לחיצה שמאלית לצבע מוגדר מראש או Shift + לחיצה שמאלית לבחירת צבע מותאמת אישית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1323
+msgid "Add color change - Left click"
+msgstr "הוסף שינוי צבע - לחיצה שמאלית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1324
+msgid "or press \"+\" key"
+msgstr "או לחץ על מקש \"+\""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1326
+msgid "Add another code - Ctrl + Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1327
+msgid "Add another code - Right click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1333
+msgid "The sequential print is on.\nIt's impossible to apply any custom G-code for objects printing sequentually.\nThis code won't be processed during G-code generation."
+msgstr "הדפסה ברצף פועלת.\n"
+"It's impossible to apply any custom G-code for objects printing sequentually.\n"
+"This code won't be processed during G-code generation."
+#, possible-c-format
+msgid "Color change (\"%1%\")"
+msgstr "שינוי צבע (\"%1%\")"
+#, possible-c-format
+msgid "Color change (\"%1%\") for Extruder %2%"
+msgstr "שינוי צבע (\"%1%\") עבור ראש הדפסה %2%"
+#, possible-c-format
+msgid "Pause print (\"%1%\")"
+msgstr "השהה את ההדפסה (\"% 1%\")"
+#, possible-c-format
+msgid "Custom template (\"%1%\")"
+msgstr "תבנית מותאמת אישית (\"% 1%\")"
+#, possible-c-format
+msgid "Extruder (tool) is changed to Extruder \"%1%\""
+msgstr "ראש ההדפסה (כלי) שונה לראש הדפסה %1%"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1356
+msgid "Note"
+msgstr "הערה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1358
+msgid "G-code associated to this tick mark is in a conflict with print mode.\nEditing it will cause changes of Slider data."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1361
+msgid "There is a color change for extruder that won't be used till the end of print job.\nThis code won't be processed during G-code generation."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1364
+msgid "There is an extruder change set to the same extruder.\nThis code won't be processed during G-code generation."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1367
+msgid "There is a color change for extruder that has not been used before.\nCheck your settings to avoid redundant color changes."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1372
+msgid "Delete tick mark - Left click or press \"-\" key"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1374
+msgid "Edit tick mark - Ctrl + Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1375
+msgid "Edit tick mark - Right click"
+msgstr ""
+#, possible-c-format
+msgid "Extruder %d"
+msgstr "ראש הדפסה %d"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1476 src/slic3r/GUI/GUI_ObjectList.cpp:1848
+msgid "active"
+msgstr "פעיל"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1485
+msgid "Switch code to Change extruder"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1485 src/slic3r/GUI/GUI_ObjectList.cpp:1815
+msgid "Change extruder"
+msgstr "החלפת ראש הדפסה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1486
+msgid "Change extruder (N/A)"
+msgstr "החלף ראש הדפסה (לא מתאים)"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1488
+msgid "Use another extruder"
+msgstr "השתמש בראש הדפסה אחר"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1510
+msgid "used"
+msgstr "בשימוש"
+#, possible-c-format
+msgid "Switch code to Color change (%1%) for:"
+msgstr ""
+#, possible-c-format
+msgid "Add color change (%1%) for:"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1870
+msgid "Add color change"
+msgstr "הוסף שינוי צבע"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1880
+msgid "Add pause print"
+msgstr "הוסף השהיית הדפסה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1884
+msgid "Add custom template"
+msgstr "הוסף תבנית מותאמת אישית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1887
+msgid "Add custom G-code"
+msgstr "הוספת G-Code מותאם אישית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1905
+msgid "Edit color"
+msgstr "ערוך צבע"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1906
+msgid "Edit pause print message"
+msgstr "ערוך הודעת השהיית הדפסה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1907
+msgid "Edit custom G-code"
+msgstr "עריכת G-Code מותאם אישית"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1913
+msgid "Delete color change"
+msgstr "מחק שינוי צבע"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1914
+msgid "Delete tool change"
+msgstr "מחק החלפת כלי"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1915
+msgid "Delete pause print"
+msgstr "מחק את השהיית ההדפסה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1916
+msgid "Delete custom G-code"
+#: src/slic3r/GUI/DoubleSlider.cpp:2080
+msgstr "מחיקת G-Code מותאם אישית"
+msgid "Jump to height"
+msgstr "קפוץ לגובה"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1935
+msgid "Supprese show the ruler"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
+msgid "Show object height"
+msgstr "הראה גובה אובייקט"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1939
+msgid "Show object height on the ruler"
+msgstr "הראה גובה אובייקט על הסרגל"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
+msgid "Show estimated print time"
+msgstr "הצג זמן הדפסה משוער"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1943
+msgid "Show estimated print time on the ruler"
+msgstr "הראה את זמן ההדפסה המשוער על הסרגל"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
+msgid "Ruler mode"
+msgstr "מצב סרגל"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1947
+msgid "Set ruler mode"
+msgstr "הגדר מצב סרגל"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1952
+msgid "Set extruder sequence for the entire print"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2038
+msgid "Enter custom G-code used on current layer"
+msgstr "הזן G-Code עבור השכבה הנוכחית"
+#, possible-c-format
+msgid "Custom G-code on current layer (%1% mm)."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2054
+msgid "Enter short message shown on Printer display when a print is paused"
+msgstr "הזן הודעה קצרה התוצג במדפסת כאשר ההדפסה מושהית"
+#, possible-c-format
+msgid "Message for pause print on current layer (%1% mm)."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2075
+msgid "Enter the move you want to jump to"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2075 src/slic3r/GUI/DoubleSlider.cpp:2079
+msgid "Enter the height you want to jump to"
+msgstr "הזן את הגובה שאליו ברצונך לקפוץ"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2340
+msgid "The last color change data was saved for a single extruder printing."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2341 src/slic3r/GUI/DoubleSlider.cpp:2356
+msgid "The last color change data was saved for a multi extruder printing."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2343
+msgid "Your current changes will delete all saved color changes."
+msgstr "השינויים הנוכחיים שלך ימחקו את כל שינויי הצבע השמורים."
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2344 src/slic3r/GUI/DoubleSlider.cpp:2364
+msgid "Are you sure you want to continue?"
+msgstr "האם אתה בטוח שאתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2357
+msgid "Select YES if you want to delete all saved tool changes, \nNO if you want all tool changes switch to color changes, \nor CANCEL to leave it unchanged."
+msgstr "בחר YES אם ברצונך למחוק את כל שינויי הכלים שנשמרו,\n"
+"בחר NO אם אתה רוצה שכל שינויים בכלי יעברו לשינויים בצבע\n"
+"בחר CANCLE כדי להשאיר אותו ללא שינוי."
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2360
+msgid "Do you want to delete all saved tool changes?"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2362
+msgid "The last color change data was saved for a multi extruder printing with tool changes for whole print."
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:2363
+msgid "Your current changes will delete all saved extruder (tool) changes."
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:499
+msgstr ""
+msgid "default"
+msgstr "ברירת מחדל"
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
+msgid "Set extruder sequence"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
+msgid "Set extruder change for every"
+#: src/libslic3r/PrintConfig.cpp:3449
+msgstr "הגדר החלפת ראש הדפסה כל"
+msgid "layers"
+msgstr "שכבות"
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
+msgid "Set extruder(tool) sequence"
+msgstr ""
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
+msgid "Remove extruder from sequence"
+msgstr "הסר את ראש ההדפסה מהרצף"
+
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
+msgid "Add extruder to sequence"
+msgstr "הוספת ראש הדפסה לרצף"
+
+#: src/slic3r/GUI/Field.cpp:185
+msgid "default value"
+msgstr "ערך ברירת מחדל"
+
+#: src/slic3r/GUI/Field.cpp:188
+msgid "parameter name"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
+msgstr "שם משתנה"
+msgid "N/A"
+msgstr "לא זמין"
+#, possible-c-format
+msgid "%s doesn't support percentage"
+#: src/slic3r/GUI/Field.cpp:1484 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
+msgstr "% s אינו תומך באחוזים"
+msgid "Invalid numeric input."
+#: src/slic3r/GUI/Field.cpp:1496
+msgstr "קלט מספרי לא חוקי."
+msgid "Input value is out of range"
+msgstr "ערך הקלט מחוץ לטווח"
+#, possible-c-format
+msgid "Do you mean %s%% instead of %s %s?\nSelect YES if you want to change this value to %s%%, \nor NO if you are sure that %s %s is a correct value."
+msgstr "האם התכוונת ל-% s %% במקום ל-% s% s?\n"
+"Select YES if you want to change this value to %s%%, \n"
+"or NO if you are sure that %s %s is a correct value."
+
+#: src/slic3r/GUI/Field.cpp:300
+msgid "Parameter validation"
+msgstr "אימות פרמטרים"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:150
+msgid "Flash!"
+msgstr "צרוב!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:152
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr "צריבה בתהליך אנא אל תנתק את המדפסת!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:199
+msgid "Flashing failed"
+msgstr "צריבה נכשלה"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:282
+msgid "Flashing succeeded!"
+msgstr "צריבה הצליחה!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:283
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr "צריבה נכשלה Please see the avrdude log below."
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:284
+msgid "Flashing cancelled."
+msgstr "צריבה בוטלה"
+#, possible-c-format
+msgid "This firmware hex file does not match the printer model.\nThe hex file is intended for: %s\nPrinter reported: %s\n\nDo you want to continue and flash this hex file anyway?\nPlease only continue if you are sure this is the right thing to do."
+msgstr "קובץ הhex של הקשוחה אינו תואם לדגם המדפסת\n"
+"קובץ ה- hex מיועד ל:% s\n"
+"המדפסת המדווחת:% s\n"
+"\n"
+"האם אתה רוצה להמשיך ולצרוב את קובץ ה- hex הזה בכל זאת?\n"
+"אנא המשך רק אם אתה בטוח שזה הדבר הנכון לעשות."
+#, possible-c-format
+msgid "Multiple %s devices found. Please only connect one at a time for flashing."
+msgstr "נמצאו מספר מכשירים% s. אנא חבר רק אחד בכל פעם עבור הצריבה"
+#, possible-c-format
+msgid "The %s device was not found.\nIf the device is connected, please press the Reset button next to the USB connector ..."
+msgstr "המכשיר% s לא נמצא.\n"
+"אם המכשיר מחובר, לחץ על כפתור האיפוס ליד מחבר ה- USB ..."
+#, possible-c-format
+msgid "The %s device could not have been found"
+msgstr "לא ניתן היה למצוא את מכשיר% s"
+#, possible-c-format
+msgid "Error accessing port at %s: %s"
+msgstr "שגיאה בגישה ליציאה ב-% s:% s"
+#, possible-c-format
+msgid "Error: %s"
+msgstr "שגיאה:% s"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:777
+msgid "Firmware flasher"
+msgstr "צורב קשוחה"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:802
+msgid "Firmware image:"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:399
+msgstr "תמונת קשוחה:"
+msgid "Browse"
+msgstr "דפדף"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:807
+msgid "Serial port:"
+msgstr "יציאה טורית:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:809
+msgid "Autodetected"
+msgstr "זוהה אוטומטית"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:810
+msgid "Rescan"
+msgstr "סרוק מחדש"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:817
+msgid "Progress:"
+msgstr "התקדמות:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:820
+msgid "Status:"
+msgstr "מצב:"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:821
+msgid "Ready"
+msgstr "מוּכָן"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:841
+msgid "Advanced: Output log"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:189
+msgstr "מתקדם: יומן פלט"
+msgid "Close"
+msgstr "סגור"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:902
+msgid "Are you sure you want to cancel firmware flashing?\nThis could leave your printer in an unusable state!"
+msgstr "האם אתה בטוח שברצונך לבטל את צריבת הקשוחה?\n"
+"זה יכול להשאיר את המדפסת במצב לא שמיש!"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:903
+msgid "Confirmation"
+msgstr "אישור"
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:906
+msgid "Cancelling..."
+msgstr "מבטל ..."
+
+#: src/slic3r/GUI/GCodeViewer.cpp:244
+msgid "Tool position"
+msgstr "מיקום כלי"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1033
+msgid "Generating toolpaths"
+msgstr "מייצר מסלול כלי"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1424
+msgid "Generating vertex buffer"
+msgstr "מייצר vertex buffer"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1505
+msgid "Generating index buffers"
+msgstr "מייצרindex buffers"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
+msgid "Click to hide"
+msgstr "לחץ כדי להסתיר"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2240
+msgid "Click to show"
+msgstr "לחץ להצגה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2369
+msgid "up to"
+msgstr "עד ל"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2375
+msgid "above"
+msgstr "מֵעַל"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
+msgid "from"
+msgstr "מ"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2383
+msgid "to"
+#: src/slic3r/GUI/GUI_Preview.cpp:250
+msgstr "עד"
+msgid "Feature type"
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgstr "סוג תכונה"
+msgid "Time"
+msgstr "זְמַן"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2419
+msgid "Percentage"
+msgstr "אחוזים"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2422
+msgid "Height (mm)"
+msgstr "גובה (מ\"מ)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2423
+msgid "Width (mm)"
+msgstr "רוחב (מ\"מ)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2424
+msgid "Speed (mm/s)"
+msgstr "מהירות (מ\"מ / שניות)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2425
+msgid "Fan Speed (%)"
+msgstr "מהירות מאוורר (%)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2426
+msgid "Layer Time"
+msgstr "זמן שכבה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2427
+msgid "Layer Time (log)"
+msgstr "זמן שכבה (יומן)"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2428 src/slic3r/GUI/GUI_Preview.cpp:257
+msgid "Chronology"
+msgstr "כרונולוגי"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2429
+msgid "Volumetric flow rate (mm³/s)"
+#: src/slic3r/GUI/GUI_Preview.cpp:878
+msgstr "קצב זרימה נפחי (מ\"מ³ / ש)"
+msgid "Tool"
+#: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/Plater.cpp:688
+msgstr "כלי"
+msgid "Filament"
+msgstr "מילוי"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2432 src/slic3r/GUI/GUI_Preview.cpp:261
+msgid "Color Print"
+#: src/libslic3r/PrintConfig.cpp:3575
+msgstr "הדפסת צבע"
+msgid "Temperature"
+#: src/slic3r/GUI/wxExtensions.cpp:516 src/libslic3r/PrintConfig.cpp:997
+msgstr "טמפרטורה"
+msgid "Extruder"
+msgstr "ראש הדפסה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2491
+msgid "Default color"
+msgstr "צבע ברירת מחדל"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2515
+msgid "default color"
+msgstr "צבע ברירת מחדל"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2610 src/slic3r/GUI/GCodeViewer.cpp:2656
+msgid "Color change"
+msgstr "שינוי צבע"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2629 src/slic3r/GUI/GCodeViewer.cpp:2654
+msgid "Print"
+#: src/slic3r/GUI/GUI_Preview.cpp:1031
+msgstr "הדפס"
+msgid "Pause"
+msgstr "השהה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Event"
+msgstr "אירוע"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Remaining time"
+msgstr "זמן שנותר"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2663
+msgid "Duration"
+#: src/libslic3r/PrintConfig.cpp:3748
+msgstr "משך"
+msgid "Travel"
+msgstr "תנועה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2701
+msgid "Movement"
+msgstr "תזוזה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2702
+msgid "Extrusion"
+msgstr "הדפסה"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2703 src/slic3r/GUI/Tab.cpp:2083
+msgid "Retraction"
+#: src/slic3r/GUI/GUI_Preview.cpp:304
+msgstr "נסיגה"
+msgid "Options"
+msgstr "אפשרויות"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2737 src/slic3r/GUI/GUI_Preview.cpp:1027
+msgid "Retractions"
+msgstr "נסיגות"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2738 src/slic3r/GUI/GUI_Preview.cpp:1028
+msgid "Deretractions"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2739 src/slic3r/GUI/GUI_Preview.cpp:1029
+msgid "Tool changes"
+msgstr "שינויי כלי"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2740 src/slic3r/GUI/GUI_Preview.cpp:1030
+msgid "Color changes"
+msgstr "שינויי צבע"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2741 src/slic3r/GUI/GUI_Preview.cpp:1031
+msgid "Print pauses"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2742 src/slic3r/GUI/GUI_Preview.cpp:1032
+msgid "Custom G-codes"
+#: src/slic3r/GUI/Plater.cpp:691 src/libslic3r/PrintConfig.cpp:156
+msgstr "G-Code מותאם אישית"
+msgid "Printer"
+#: src/slic3r/GUI/Plater.cpp:687
+msgstr "מדפסת"
+msgid "Print settings"
+#: src/slic3r/GUI/Plater.cpp:1242
+msgstr "הגדרות הדפסה"
+msgid "Estimated printing time"
+msgstr "זמן הדפסה משוער"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2813
+msgid "Normal mode"
+msgstr "מצב רגיל"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2818
+msgid "Stealth mode"
+msgstr "מצב שקט"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2845
+msgid "Show stealth mode"
+msgstr "הצג מצב שקט"
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2849
+msgid "Show normal mode"
+msgstr "הצג מצב רגיל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4494
+msgid "Variable layer height"
+msgstr "גובה שכבה משתנה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:230
+msgid "Left mouse button:"
+msgstr "לחצן העכבר השמאלי:"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:232
+msgid "Add detail"
+msgstr "הוסף פירוט"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:234
+msgid "Right mouse button:"
+msgstr "לחצן העכבר הימני:"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:236
+msgid "Remove detail"
+msgstr "הסר פירוט"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:238
+msgid "Shift + Left mouse button:"
+msgstr "Shift + כפתור עכבר שמאלי:"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:240
+msgid "Reset to base"
+msgstr "אפס לבסיס"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:242
+msgid "Shift + Right mouse button:"
+msgstr "Shift + לחצן העכבר הימני:"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:244
+msgid "Smoothing"
+msgstr "הַחלָקָה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:246
+msgid "Mouse wheel:"
+msgstr "גלגלת העכבר:"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:248
+msgid "Increase/decrease edit area"
+msgstr "הגדל / הקטן את אזור העריכה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:251
+msgid "Adaptive"
+msgstr "מסתגל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:257
+msgid "Quality / Speed"
+msgstr "איכות / מהירות"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:260
+msgid "Higher print quality versus higher print speed."
+msgstr "איכות הדפסה גבוהה יותר לעומת מהירות הדפסה גבוהה יותר."
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:271
+msgid "Smooth"
+msgstr "החלקה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:1027
+msgid "Radius"
+msgstr "קוטר"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:287
+msgid "Keep min"
+msgstr "שמור מינימום"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:296 src/slic3r/GUI/GLCanvas3D.cpp:3908
+msgid "Reset"
+msgstr "אִתחוּל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:561
+msgid "Variable layer height - Manual edit"
+msgstr "גובה שכבה משתנה - עריכה ידנית"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:629
+msgid "An object outside the print area was detected."
+msgstr "אותר אובייקט מחוץ לאיזור ההדפסה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:630
+msgid "A toolpath outside the print area was detected."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:631
+msgid "SLA supports outside the print area were detected."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:632
+msgid "Some objects are not visible."
+msgstr "אובייקטים מסוימים אינם גלויים."
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:634
+msgid "An object outside the print area was detected.\nResolve the current problem to continue slicing."
+msgstr "אותר אובייקט מחוץ לאיזור ההדפסה\n"
+"פתור את הבעיה הנוכחית כדי להמשיך לחתוך."
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:949
+msgid "Seq."
+msgstr "רצף"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1424
+msgid "Variable layer height - Reset"
+msgstr "גובה שכבה משתנה - איפוס"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1432
+msgid "Variable layer height - Adaptive"
+msgstr "גובה שכבה משתנה - מסתגל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1440
+msgid "Variable layer height - Smooth all"
+msgstr "גובה שכבה משתנה - החלק הכל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1839
+msgid "Mirror Object"
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
+msgstr "שיקוף אובייקט"
+msgid "Gizmo-Move"
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
+msgstr ""
+msgid "Gizmo-Rotate"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3279
+msgid "Move Object"
+msgstr "העבר אובייקט"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3744 src/slic3r/GUI/GLCanvas3D.cpp:4455
+msgid "Switch to Settings"
+msgstr "עבור להגדרות"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3745 src/slic3r/GUI/GLCanvas3D.cpp:4455
+msgid "Print Settings Tab"
+msgstr "כרטיסיית הגדרות הדפסה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
+msgid "Filament Settings Tab"
+msgstr "כרטיסיית הגדרות חומרים"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4456
+msgid "Material Settings Tab"
+msgstr "כרטיסיית הגדרות חומר"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3747 src/slic3r/GUI/GLCanvas3D.cpp:4457
+msgid "Printer Settings Tab"
+msgstr "כרטיסיית הגדרות מדפסת"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
+msgid "Undo History"
+msgstr "בטל היסטוריה"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3795
+msgid "Redo History"
+msgstr "בצע היסטוריה מחדש"
+#, possible-c-format
+msgid "Undo %1$d Action"
+msgid_plural "Undo %1$d Actions"
+msgstr[0] "בטל %1$d  פעולה"
+msgstr[1] "ביטול %1$d פעולות"
+#, possible-c-format
+msgid "Redo %1$d Action"
+msgid_plural "Redo %1$d Actions"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Search.cpp:426
+msgstr[0] "ביצוע פעולה %1$d"
+msgstr[1] "בצע מחדש %1$d פעולות"
+msgid "Search"
+#: src/slic3r/GUI/Search.cpp:433
+msgstr "חפש"
+msgid "Enter a search term"
+msgstr "הזן מונח חיפוש"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3889
+msgid "Arrange options"
+msgstr "סדר אפשרויות"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3896
+msgid "Gap size"
+msgstr "גודל מרווח"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3901
+msgid "Enable rotations"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Plater.cpp:1657
+msgstr "אפשר סיבובים"
+msgid "Arrange"
+msgstr "סידור"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4339
+msgid "Add..."
+#: src/slic3r/GUI/Tab.cpp:3533
+msgstr "הוסף..."
+msgid "Delete"
+#: src/slic3r/GUI/Plater.cpp:4863
+msgstr "מחיקה"
+msgid "Delete all"
+msgstr "מחק הכל"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365 src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Arrange selection"
+msgstr "סידור נבחרים"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4365
+msgid "Click right mouse button to show arrangement options"
+msgstr "לחץ על לחצן העכבר הימני כדי להציג אפשרויות סידור"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4387
+msgid "Copy"
+msgstr "העתק"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4396
+msgid "Paste"
+#: src/slic3r/GUI/Plater.cpp:3804 src/slic3r/GUI/Plater.cpp:3942
+msgstr "הדבק"
+msgid "Add instance"
+msgstr "הוסף מופע"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4419 src/slic3r/GUI/Plater.cpp:3944
+msgid "Remove instance"
+msgstr "הסר מופע"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4432
+msgid "Split to objects"
+msgstr "פיצול לאובייקטים"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4442 src/slic3r/GUI/GUI_ObjectList.cpp:1633
+msgid "Split to parts"
+#: src/slic3r/GUI/MainFrame.cpp:1139
+msgstr "פיצול לחלקים"
+msgid "Undo"
+msgstr "ביטול"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/GLCanvas3D.cpp:4583
+msgid "Click right mouse button to open/close History"
+msgstr "לחץ על לחצן העכבר הימני כדי לפתוח / לסגור את ההיסטוריה"
+#, possible-c-format
+msgid "Next Undo action: %1%"
+#: src/slic3r/GUI/MainFrame.cpp:1142
+msgstr "פעולת הביטול הבאה:%1%"
+msgid "Redo"
+msgstr "ביצוע שוב"
+#, possible-c-format
+msgid "Next Redo action: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:6233
+msgid "Selection-Add from rectangle"
+msgstr "בחירה-הוספה ממלבן"
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:6252
+msgid "Selection-Remove from rectangle"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:5715
+msgstr "בחירה - החסרה מהמלבן"
+msgid "Cut"
+msgstr "חתוך"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
+msgid "Keep upper part"
+msgstr "שמור על החלק העליון"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
+msgid "Keep lower part"
+msgstr "שמור על החלק התחתון"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172
+msgid "Rotate lower part upwards"
+msgstr "סובב את החלק התחתון כלפי מעלה"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177
+msgid "Perform cut"
+msgstr "בצע חתך"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
+msgid "Paint-on supports"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
+msgstr "צביעת תמיכות"
+msgid "Clipping of view"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
+msgstr ""
+msgid "Reset direction"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27
+msgstr "אפס כיוון"
+msgid "Brush size"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28
+msgstr "גודל המברשת"
+msgid "Brush shape"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29
+msgstr "צורת מברשת"
+msgid "Left mouse button"
+msgstr "לחצן העכבר השמאלי"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
+msgid "Enforce supports"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
+msgstr "אכוף תמיכות"
+msgid "Right mouse button"
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:374
+msgstr "כפתור עכבר ימני"
+msgid "Block supports"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
+msgstr "אסור תמיכות"
+msgid "Shift + Left mouse button"
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:379
+msgstr "Shift + כפתור עכבר שמאלי"
+msgid "Remove selection"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
+msgstr "הסר את הבחירה"
+msgid "Remove all selection"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
+msgstr "הסר את כל הבחירות"
+msgid "Circle"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1620
+msgstr "מעגל"
+msgid "Sphere"
+msgstr "כדור"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129
+msgid "Autoset by angle"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:119
+msgstr "הגדר אוטומטית לפי זווית"
+msgid "Reset selection"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:142
+msgstr "אפס את הבחירה"
+msgid "Alt + Mouse wheel"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:160
+msgstr "גלגל Alt + עכבר"
+msgid "Paints all facets inside, regardless of their orientation."
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:174
+msgstr ""
+msgid "Ignores facets facing away from the camera."
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:204
+msgstr ""
+msgid "Ctrl + Mouse wheel"
+msgstr "גלגל Ctrl + עכבר"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
+msgid "Autoset custom supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
+msgid "Threshold:"
+msgstr "סף:"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
+msgid "Enforce"
+msgstr "אכוף"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
+msgid "Block"
+msgstr "אסור"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295
+msgid "Block supports by angle"
+msgstr "חסום תמיכות לפי זווית"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296
+msgid "Add supports by angle"
+msgstr "הוספת תמיכות לפי זווית"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
+msgid "Place on face"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
+msgid "Hollow this object"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
+msgid "Preview hollowed and drilled model"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
+msgid "Offset"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56
+msgstr "היסט"
+msgid "Quality"
+#: src/libslic3r/PrintConfig.cpp:4837
+msgstr "איכות"
+msgid "Closing distance"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
+msgid "Hole diameter"
+msgstr "קוטר חור"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
+msgid "Hole depth"
+msgstr "עומק חור"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
+msgid "Remove selected holes"
+msgstr "הסר חורים נבחרים"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
+msgid "Remove all holes"
+msgstr "הסר את כל החורים"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
+msgid "Show supports"
+msgstr "הצג תמיכות"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308
+msgid "Add drainage hole"
+msgstr "הוסף חור ניקוז"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424
+msgid "Delete drainage hole"
+msgstr "מחק חור ניקוז"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624
+msgid "Hollowing parameter change"
+msgstr "החלפת פרמטר חלול"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693
+msgid "Change drainage hole diameter"
+msgstr "שנה את קוטר חור הניקוז"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785
+msgid "Hollow and drill"
+msgstr "חלול וקדוח"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835
+msgid "Move drainage hole"
+msgstr "הזז את חור הניקוז"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64
+msgid "Move"
+#: src/libslic3r/PrintConfig.cpp:5767
+msgstr ""
+msgid "Rotate"
+#: src/libslic3r/PrintConfig.cpp:5782
+msgstr ""
+msgid "Scale"
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:382
+msgstr ""
+msgid "Enforce seam"
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:384
+msgstr "אכיפת קו תפר"
+msgid "Block seam"
+msgstr "חסימת קו תפר"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
+msgid "Seam painting"
+msgstr "ציור קו תפר"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
+msgid "Head diameter"
+msgstr "קוטר הראש"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
+msgid "Lock supports under new islands"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
+msgstr ""
+msgid "Remove selected points"
+msgstr "הסר את הנקודות שנבחרו"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
+msgid "Remove all points"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
+msgstr "הסר את כל הנקודות"
+msgid "Apply changes"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
+msgstr "החל שינויים"
+msgid "Discard changes"
+msgstr "בטל שינויים"
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
+msgid "Minimal points distance"
+#: src/libslic3r/PrintConfig.cpp:4667
+msgstr ""
+msgid "Support points density"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
+msgstr ""
+msgid "Auto-generate points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
+msgid "Manual editing"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374
+msgid "Add support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514
+msgid "Delete support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694
+msgid "Change point head diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762
+msgid "Support parameter change"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
+msgid "SLA Support Points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
+msgid "SLA gizmo turned on"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911
+msgid "Do you want to save your manually edited support points?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
+msgid "Save changes?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924
+msgid "SLA gizmo turned off"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955
+msgid "Move support point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048
+msgid "Support points edit"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127
+msgid "Autogeneration will erase all manually edited points."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128
+msgid "Are you sure you want to do it?"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:366
+msgstr ""
+msgid "Warning"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134
+msgid "Autogenerate support points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181
+msgid "SLA gizmo keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192
+msgid "Note: some shortcuts work in (non)editing mode only."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+msgstr ""
+msgid "Left click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
+msgid "Add point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
+msgid "Right click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
+msgid "Remove point"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
+msgstr ""
+msgid "Drag"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+msgid "Move point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+msgid "Add point to selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+msgid "Remove point from selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
+msgid "Select by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
+msgid "Deselect by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
+msgid "Select all points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
+msgid "Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
+msgid "Move clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
+msgid "Reset clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
+msgid "Switch to editing mode"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
+msgid "Gizmo-Scale"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630
+msgid "Gizmo-Place on Face"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40
+msgid "Entering Paint-on supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:41
+msgid "Entering Seam painting"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48
+msgid "Leaving Seam painting"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:49
+msgid "Leaving Paint-on supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:372
+msgid "Add supports"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:242
+msgid "is based on PrusaSlicer by Prusa and Slic3r by Alessandro Ranellucci and the RepRap community."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:244
+msgid "Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:245
+msgid "Artwork model by Durand Remi"
+msgstr ""
+#, possible-c-format
+msgid "Starting with %1% 2.3, configuration directory on Linux has changed (according to XDG Base Directory Specification) to \n%2%.\n\nThis directory did not exist yet (maybe you run the new version for the first time).\nHowever, an old %1% configuration directory was detected in \n%3%.\n\nConsider moving the contents of the old directory to the new location in order to access your profiles, etc.\nNote that if you decide to downgrade %1% in future, it will use the old location again.\n\nWhat do you want to do now?"
+msgstr ""
+#, possible-c-format
+msgid "%s - BREAKING CHANGE"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:395
+msgid "Quit, I will move my data now"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:395
+msgid "Start the application"
+msgstr ""
+#, possible-c-format
+msgid "%s has encountered an error. It was likely caused by running out of memory. If you are sure you have enough RAM on your system, this may also be a bug and we would be glad if you reported it.\n\nThe application will now terminate."
+msgstr "% s נתקל בשגיאה. זה נגרם ככל הנראה בגלל שנגמר הזיכרון. אם אתה בטוח שיש לך מספיק זיכרון RAM במערכת שלך, זה יכול להיות גם באג ונשמח אם תדווח עליו.\n"
+"\n"
+"The application will now terminate."
+
+#: src/slic3r/GUI/GUI_App.cpp:587
+msgid "Fatal error"
+msgstr "שגיאה קריטית"
+
+#: src/slic3r/GUI/GUI_App.cpp:707
+msgid "Error parsing PrusaSlicer config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:713
+msgid "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error."
+msgstr ""
+#, possible-c-format
+msgid "%s\nDo you want to continue?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:769 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
+msgid "Remember my choice"
+msgstr "זכור את הבחירה שלי"
+
+#: src/slic3r/GUI/GUI_App.cpp:804
+msgid "Loading configuration"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:863
+msgid "Preparing settings tabs"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1108
+msgid "You have the following presets with saved options for \"Print Host upload\""
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1112
+msgid "But since this version of PrusaSlicer we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1114
+msgid "By default new Printer devices will be named as \"Printer N\" during its creation.\nNote: This name can be changed later from the physical printers settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1117
+msgid "Information"
+msgstr "מידע"
+
+#: src/slic3r/GUI/GUI_App.cpp:1130 src/slic3r/GUI/GUI_App.cpp:1141
+msgid "Recreating"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1146
+msgid "Loading of current presets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1151
+msgid "Loading of a mode view"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1303
+msgid "Choose one file (3MF/AMF):"
+msgstr "בחר קובץ אחד (3MF / AMF):"
+
+#: src/slic3r/GUI/GUI_App.cpp:1315
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr "בחר קובץ אחד או יותר (STL / OBJ / AMF / 3MF / PRUSA):"
+
+#: src/slic3r/GUI/GUI_App.cpp:1327
+msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
+msgstr "בחר קובץ אחד (GCODE / .GCO / .G / .ngc / NGC):"
+
+#: src/slic3r/GUI/GUI_App.cpp:1338
+msgid "Changing of an application language"
+msgstr "שינוי שפת הממשק"
+
+#: src/slic3r/GUI/GUI_App.cpp:1388
+msgid "Select the language"
+msgstr "בחירת שפה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1388
+msgid "Language"
+msgstr "שפה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1518
+msgid "modified"
+msgstr "שונה"
+#, possible-c-format
+msgid "Run %s"
+msgstr "הפעל את% s"
+
+#: src/slic3r/GUI/GUI_App.cpp:1571
+msgid "&Configuration Snapshots"
+msgstr "&תצורת תמונת מצב"
+
+#: src/slic3r/GUI/GUI_App.cpp:1571
+msgid "Inspect / activate configuration snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1572
+msgid "Take Configuration &Snapshot"
+msgstr "בצע &תמונת מצב עבור ההגדרות"
+
+#: src/slic3r/GUI/GUI_App.cpp:1572
+msgid "Capture a configuration snapshot"
+msgstr "צבע תמונת מצב של תצורה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1573
+msgid "Check for updates"
+msgstr "בדוק עדכונים"
+
+#: src/slic3r/GUI/GUI_App.cpp:1573
+msgid "Check for configuration updates"
+msgstr "בדוק אם קיימים עדכוני תצורה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1576
+msgid "&Preferences"
+msgstr "&העדפות"
+
+#: src/slic3r/GUI/GUI_App.cpp:1582
+msgid "Application preferences"
+msgstr "העדפות יישום"
+
+#: src/slic3r/GUI/GUI_App.cpp:1587 src/slic3r/GUI/wxExtensions.cpp:674
+msgid "Simple"
+msgstr "פשוט"
+
+#: src/slic3r/GUI/GUI_App.cpp:1587
+msgid "Simple View Mode"
+msgstr "מצב תצוגה פשוט"
+
+#: src/slic3r/GUI/GUI_App.cpp:1589
+msgid "Advanced View Mode"
+msgstr "מצב תצוגה מתקדם"
+
+#: src/slic3r/GUI/GUI_App.cpp:1590 src/slic3r/GUI/wxExtensions.cpp:677
+msgid "Expert"
+msgstr "מומחה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1590
+msgid "Expert View Mode"
+msgstr "מצב תצוגת מומחה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1595
+msgid "Mode"
+msgstr "מצב"
+#, possible-c-format
+msgid "%s View Mode"
+msgstr "%s מצב תצוגה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1598
+msgid "&Language"
+msgstr "&שפה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1601
+msgid "Flash printer &firmware"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1601
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1617
+msgid "Taking configuration snapshot"
+msgstr "מצלם תמונת מצב של ההגדרות"
+
+#: src/slic3r/GUI/GUI_App.cpp:1617
+msgid "Snapshot name"
+msgstr "שם תמונת מצב"
+
+#: src/slic3r/GUI/GUI_App.cpp:1679
+msgid "Language selection"
+msgstr "בחירת שפה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1681
+msgid "Switching the language will trigger application restart.\nYou will lose content of the plater."
+msgstr "החלפת השפה תפעיל מחדש את היישום.\n"
+"תאבד את כל תוכן המגש"
+
+#: src/slic3r/GUI/GUI_App.cpp:1683
+msgid "Do you want to proceed?"
+msgstr "האם אתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/GUI_App.cpp:1710
+msgid "&Configuration"
+msgstr "&תצורה"
+
+#: src/slic3r/GUI/GUI_App.cpp:1741
+msgid "The preset(s) modifications are successfully saved"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1941 src/slic3r/GUI/Tab.cpp:3287
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1942
+msgid "Please check and fix your object list."
+#: src/slic3r/GUI/Plater.cpp:2343 src/slic3r/GUI/Tab.cpp:3289
+msgstr ""
+msgid "Attention!"
+msgstr "שים לב!"
+
+#: src/slic3r/GUI/GUI_App.cpp:1960
+msgid "Select a gcode file:"
+msgstr "בחירת קובץ G-Code:"
+
+#: src/slic3r/GUI/GUI_Init.cpp:73 src/slic3r/GUI/GUI_Init.cpp:76
+msgid "PrusaSlicer GUI initialization failed"
+msgstr ""
+#, possible-c-format
+msgid "Fatal error, exception catched: %1%"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Start at height"
+msgstr "התחל בגובה"
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Stop at height"
+msgstr "עצור בגובה"
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:161
+msgid "Remove layer range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:165
+msgid "Add layer range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:51
+msgid "Add part"
+msgstr "הוסף חלק"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:52
+msgid "Add modifier"
+msgstr "הוסף משנה"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:53
+msgid "Add support enforcer"
+msgstr "הוסף אוכף תמיכות"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:54
+msgid "Add support blocker"
+msgstr "הוסף אוסר תמיכות"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:55
+msgid "Add seam position"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
+msgstr "הוסיף מיקום קו תפר"
+msgid "Name"
+msgstr "שם"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:310 src/slic3r/GUI/GUI_ObjectList.cpp:451
+msgid "Editing"
+msgstr "עריכה"
+#, possible-c-format
+msgid "Auto-repaired (%d errors):"
+msgstr "תוקן אוטומטית (% d שגיאות):"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:403
+msgid "degenerate facets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:404
+msgid "edges fixed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:405
+msgid "facets removed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:406
+msgid "facets added"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:407
+msgid "facets reversed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:408
+msgid "backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:416
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:453
+msgid "Right button click the icon to change the object settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:455
+msgid "Click the icon to change the object settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:459
+msgid "Right button click the icon to change the object printable property"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:461
+msgid "Click the icon to change the object printable property"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:584
+msgid "Change Extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:599
+msgid "Rename Object"
+msgstr "שנה את שם האובייקט"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:599
+msgid "Rename Sub-object"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4269
+msgstr "שנה את שם האובייקט משנה"
+msgid "Instances to Separated Objects"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1227
+msgid "Volumes in Object reordered"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1227
+msgid "Object reordered"
+msgstr ""
+#, possible-c-format
+msgid "Quick Add Settings (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1398
+msgid "Select showing settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1447
+msgid "Add Settings for Layers"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1448
+msgid "Add Settings for Sub-object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1449
+msgid "Add Settings for Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1519
+msgid "Add Settings Bundle for Height range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1520
+msgid "Add Settings Bundle for Sub-object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1521
+msgid "Add Settings Bundle for Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1560
+msgid "Load"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1604
+msgstr "טען"
+msgid "Box"
+msgstr "קופסא"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1646
+msgid "Height range Modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
+msgid "Add settings"
+msgstr "הוסף הגדרות"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1733
+msgid "Change type"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1755
+msgstr "שנה סוג"
+msgid "Set as a Separated Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1755
+msgid "Set as a Separated Objects"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1765
+msgid "Printable"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1780
+msgid "Rename"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1791
+msgid "Fix through the Netfabb"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1801 src/slic3r/GUI/Plater.cpp:3970
+msgid "Export as STL"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464 src/slic3r/GUI/Plater.cpp:3936
+msgstr ""
+msgid "Reload the selected volumes from disk"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1815
+msgid "Set extruder for selected items"
+#: src/libslic3r/PrintConfig.cpp:2661 src/libslic3r/PrintConfig.cpp:3523
+msgstr ""
+msgid "Default"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1867
+msgid "Scale to print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1867
+msgid "Scale the selected object to fit the print volume"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1873 src/slic3r/GUI/Plater.cpp:4980
+msgid "Convert from imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876 src/slic3r/GUI/Plater.cpp:4980
+msgid "Revert conversion from imperial units"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2594 src/libslic3r/PrintConfig.cpp:5758
+msgstr ""
+msgid "Merge"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1883
+msgid "Merge objects to the one multipart object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1891
+msgid "Merge objects to the one single object"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2235
+msgstr ""
+msgid "Add Shape"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2054
+msgid "Load Part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2093
+msgid "Error!"
+msgstr "שגיאה!"
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2168
+msgid "Add Generic Subobject"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2433
+msgstr ""
+msgid "Last instance of an object cannot be deleted."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2344
+msgid "Delete Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2366
+msgid "Delete All Instances from Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2382
+msgid "Delete Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2414
+msgid "From Object List You can't delete the last solid part from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2418
+msgid "Delete Subobject"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2437
+msgid "Delete Instance"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2461 src/slic3r/GUI/Plater.cpp:2848
+msgid "The selected object couldn't be split because it contains only one part."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2465
+msgid "Split to Parts"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2601
+msgid "Merged"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2685
+msgid "Merge all parts to the one single object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2717
+msgid "Add Layers"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
+msgid "Group manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2883
+msgid "Object manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2896
+msgid "Object Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2900
+msgid "Part Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2905
+msgid "Layer range Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2911
+msgid "Part manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2917
+msgid "Instance manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
+msgid "Height ranges"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2924
+msgid "Settings for height range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
+msgid "Delete Selected Item"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3246
+msgid "Delete Selected"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3370
+msgstr ""
+msgid "Add Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3416
+msgid "Cannot insert a new layer range after the current layer range.\nThe next layer range is too thin to be split to two\nwithout violating the minimum layer height."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3420
+msgid "Cannot insert a new layer range between the current and the next layer range.\nThe gap between the current layer range and the next layer range\nis thinner than the minimum layer height allowed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3425
+msgid "Cannot insert a new layer range after the current layer range.\nCurrent layer range overlaps with the next layer range."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3484
+msgid "Edit Height Range"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3779
+msgid "Selection-Remove from list"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3787
+msgid "Selection-Add from list"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3905
+msgid "Object or Instance"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgstr ""
+msgid "Part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3906
+msgid "Layer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3908
+msgid "Unsupported selection"
+msgstr ""
+#, possible-c-format
+msgid "You started your selection with %s Item."
+msgstr ""
+#, possible-c-format
+msgid "In this mode you can select only other %s Items%s"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3913
+msgid "of a current Object"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3993 src/slic3r/GUI/Plater.cpp:143
+msgstr ""
+msgid "Info"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4034
+msgid "You can't change a type of the last solid part of the object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Support Enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
+msgid "Support Blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4041
+msgid "Select type of part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4046
+msgid "Change Part Type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
+msgid "Enter new name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4291
+msgid "Renaming"
+#: src/slic3r/GUI/SavePresetDialog.cpp:109
+msgstr ""
+msgid "The supplied name is not valid;"
+#: src/slic3r/GUI/SavePresetDialog.cpp:102
+msgstr ""
+msgid "the following characters are not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4483
+msgid "Select extruder number:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
+msgid "This extruder will be set for selected items"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4509
+msgid "Change Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
+msgid "Set Printable"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4606 src/slic3r/GUI/Selection.cpp:1512
+msgid "Set Unprintable"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111
+msgstr ""
+msgid "World coordinates"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112
+msgstr ""
+msgid "Local coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88
+msgid "Select coordinate space, in which the transformation will be performed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:659
+msgid "Object name"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
+msgstr ""
+msgid "Position"
+#: src/slic3r/GUI/Mouse3DController.cpp:508
+msgstr ""
+msgid "Rotation"
+msgstr ""
+#, possible-c-format
+msgid "Toggle %c axis mirroring"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
+msgid "Set Mirror"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
+msgstr ""
+msgid "in"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
+msgstr ""
+msgid "Drop to bed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372
+msgid "Reset rotation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394
+msgid "Reset Rotation"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
+msgstr ""
+msgid "Reset scale"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:508
+msgid "Scale factors"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
+msgid "Translate"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:626
+msgid "You cannot use non-uniform scaling mode for multiple objects/parts selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:798
+msgid "Set Position"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:829
+msgid "Set Orientation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:894
+msgid "Set Scale"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:926
+msgid "The currently manipulated object is tilted (rotation angles are not multiples of 90°).\nNon-uniform scaling of tilted objects is only possible in the World coordinate system,\nonce the rotation is embedded into the object coordinates."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:929
+msgid "This operation is irreversible.\nDo you want to proceed?"
+msgstr "This operation is irreversible.\n"
+"האם אתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
+msgid "Additional Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:98
+msgid "Remove parameter"
+msgstr ""
+#, possible-c-format
+msgid "Delete Option %s"
+msgstr ""
+#, possible-c-format
+msgid "Change Option %s"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:248
+msgid "View"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:250
+msgid "Feature"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:251 src/libslic3r/PrintConfig.cpp:1014
+msgid "Height"
+#: src/libslic3r/PrintConfig.cpp:3900
+msgstr ""
+msgid "Width"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/PrintConfig.cpp:3026
+msgid "Speed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254 src/slic3r/GUI/PresetHints.cpp:40
+msgid "Fan"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:254
+msgid "Fan speed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255
+msgid "time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:255
+msgid "Layer time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256
+msgid "Log time"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:256
+msgid "Layer time (log)"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:257
+msgid "Chrono"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258
+msgid "Vol. flow"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:258
+msgid "Volumetric flow rate"
+#: src/libslic3r/PrintConfig.cpp:1143
+msgstr ""
+msgid "Color"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:265
+msgid "Show"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:267 src/slic3r/GUI/GUI_Preview.cpp:288
+msgid "Feature types"
+#: src/libslic3r/ExtrusionEntity.cpp:298
+msgstr ""
+msgid "Perimeter"
+#: src/libslic3r/ExtrusionEntity.cpp:300
+msgstr ""
+msgid "External perimeter"
+#: src/libslic3r/ExtrusionEntity.cpp:302
+msgstr ""
+msgid "Overhang perimeter"
+#: src/libslic3r/ExtrusionEntity.cpp:304
+msgstr ""
+msgid "Internal infill"
+#: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3149
+msgstr ""
+msgid "Solid infill"
+#: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3698
+msgstr ""
+msgid "Top solid infill"
+#: src/libslic3r/ExtrusionEntity.cpp:312
+msgstr ""
+msgid "Bridge infill"
+#: src/libslic3r/ExtrusionEntity.cpp:314
+msgstr ""
+msgid "Internal bridge infill"
+#: src/libslic3r/ExtrusionEntity.cpp:316
+msgstr ""
+msgid "Thin wall"
+#: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1778
+msgstr ""
+msgid "Gap fill"
+#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:2987
+msgstr ""
+msgid "Skirt"
+#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3417
+msgstr ""
+msgid "Support material"
+#: src/libslic3r/ExtrusionEntity.cpp:324
+msgstr ""
+msgid "Support material interface"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:283
+msgid "Sup. mat. interface"
+#: src/libslic3r/ExtrusionEntity.cpp:326
+msgstr ""
+msgid "Wipe tower"
+#: src/libslic3r/ExtrusionEntity.cpp:328
+msgstr ""
+msgid "Mill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1027
+msgid "Retr."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1028
+msgid "Dere."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1029
+msgid "Tool/C"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1030
+msgid "Col/C"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1033
+msgid "Shells"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
+msgid "Marker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1034
+msgid "Tool marker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
+msgid "Legend"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1035
+msgid "Legend/Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:806 src/slic3r/GUI/Search.cpp:464
+msgid "Use for search"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:458
+msgid "Category"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:809 src/slic3r/GUI/Search.cpp:460
+msgid "Search in English"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:145
+msgid "Arranging"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:175
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:181
+msgid "Arranging canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
+msgid "Arranging done."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/Job.cpp:75
+msgid "ERROR: not enough resources to execute a new job."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
+msgid "Searching for optimal orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
+msgid "Orientation search canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
+msgid "Orientation found."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35
+msgid "Choose SLA archive:"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39
+msgid "Import file"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46
+msgid "Import model and profile"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
+msgid "Import profile only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
+msgid "Import model only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59
+msgid "Accurate"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
+msgid "Balanced"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
+msgid "Quick"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
+msgid "Importing SLA archive"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159
+msgid "Importing canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160
+msgid "Importing done."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2341
+msgid "You cannot load SLA project with a multi-part object on the bed"
+#: src/slic3r/GUI/Tab.cpp:3288
+msgstr ""
+msgid "Please check your object list before preset changing."
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:34 src/slic3r/GUI/MainFrame.cpp:908
+msgid "Keyboard Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:97
+msgid "New project, clear plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
+msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
+msgid "Save project (3mf)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
+msgid "Save project as (3mf)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
+msgid "(Re)slice"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
+msgid "Import Config from ini/amf/3mf/gcode"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Load Config from ini/amf/3mf/gcode and merge"
+#: src/slic3r/GUI/Plater.cpp:5811 src/libslic3r/PrintConfig.cpp:5660
+msgstr ""
+msgid "Export G-code"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:5812
+msgid "Send G-code"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+msgid "Export config"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:752
+msgid "Export to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "Eject SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+msgid "Select all objects"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Deselect all"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+msgid "Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Copy to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Paste from clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Reload plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Select Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
+msgid "Select Print Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Select Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
+msgid "Select Printer Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
+msgid "Switch to 3D"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+msgid "Switch to Preview"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:165
+msgstr ""
+msgid "Print host upload queue"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
+msgid "Camera view"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
+msgid "Show/Hide object/instance labels"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135 src/slic3r/GUI/Preferences.cpp:12
+msgid "Preferences"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Show keyboard shortcuts list"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+msgid "Commands"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Add Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Remove Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Press to select multiple objects\nor move multiple objects with mouse"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+msgid "Press to activate selection rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Press to activate deselection rectangle"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+msgstr ""
+msgid "Arrow Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+msgid "Move selection 10 mm in positive Y direction"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+msgstr ""
+msgid "Arrow Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+msgid "Move selection 10 mm in negative Y direction"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgstr ""
+msgid "Arrow Left"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+msgid "Move selection 10 mm in negative X direction"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+msgstr ""
+msgid "Arrow Right"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+msgid "Move selection 10 mm in positive X direction"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgstr ""
+msgid "Any arrow"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+msgid "Movement step set to 1 mm"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Movement in camera space"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Page Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Rotate selection 45 degrees CCW"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+msgid "Page Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+msgid "Rotate selection 45 degrees CW"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+msgid "Gizmo move"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+msgid "Gizmo scale"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+msgid "Gizmo rotate"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+msgid "Gizmo cut"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+msgid "Gizmo Place face on bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
+msgid "Gizmo SLA hollow"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+msgid "Gizmo SLA support points"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+msgid "Unselect gizmo or clear selection"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+msgid "Change camera type (perspective, orthographic)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+msgid "Zoom to Bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
+msgid "Zoom to selected object\nor all objects in scene, if none selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+msgid "Zoom in"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
+msgid "Zoom out"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+msgid "Switch between Editor/Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+msgid "Collapse/Expand the sidebar"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+msgstr ""
+msgid "Show/Hide 3Dconnexion devices settings dialog"
+#: src/slic3r/GUI/MainFrame.cpp:340
+msgstr ""
+msgid "Plater"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
+msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
+msgid "Gizmo move: Press to snap by 1mm"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
+msgid "Gizmo scale: Press to snap by 5%"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
+msgid "Gizmo scale: Scale selection to fit print volume"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
+msgid "Gizmo scale: Press to activate one direction scaling"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
+msgid "Gizmo scale: Press to scale selected objects around their own center"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
+msgid "Gizmo rotate: Press to rotate selected objects around their own center"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
+msgid "Gizmos"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
+msgstr ""
+msgid "Upper Layer"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
+msgstr ""
+msgid "Lower Layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
+msgid "Show/Hide Legend & Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:209 src/slic3r/GUI/Plater.cpp:4136
+msgid "Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+msgid "Move current slider thumb Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
+msgid "Move current slider thumb Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
+msgid "Set upper thumb to current slider thumb"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+msgid "Set lower thumb to current slider thumb"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
+msgid "Add color change marker for current layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
+msgid "Delete color change marker for current layer"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
+msgstr ""
+msgid "Press to speed up 5 times while moving thumb\nwith arrow keys or mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
+msgid "Layers Slider"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+msgid "Move current slider thumb Left"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+msgid "Move current slider thumb Right"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
+msgid "Sequential Slider"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
+msgid "Keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:64 src/slic3r/GUI/MainFrame.cpp:1199
+msgid "Open new instance"
+#: src/slic3r/GUI/MainFrame.cpp:1199
+msgstr ""
+msgid "Open a new PrusaSlicer instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:80
+msgid "G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:67 src/slic3r/GUI/MainFrame.cpp:1105
+msgid "Open G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:78
+msgid "Open PrusaSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:80
+msgid "Open new G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:155
+msgid "Remember to check for updates at https://github.com/supermerill/SuperSlicer/releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:512
+msgid "based on PrusaSlicer & Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:875
+msgid "SuperSlicer Releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:875
+msgid "Open the SuperSlicer releases page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:877
+msgid "SuperSlicer wiki"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:877
+msgid "Open the SuperSlicer wiki in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:879
+msgid "SuperSlicer website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:879
+msgid "Open the SuperSlicer website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:881
+msgid "Prusa Edition website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:881
+msgid "Open the Prusa Edition website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:887
+msgid "Slic3r Website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:888
+msgid "Open the Slic3r website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:894
+msgid "System &Info"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:894
+msgid "Show system information"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:896
+msgid "Show &Configuration Folder"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:896
+msgid "Show user configuration folder (datadir)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:898
+msgid "Report an I&ssue"
+msgstr ""
+#, possible-c-format
+msgid "Report an issue on %s"
+msgstr ""
+#, possible-c-format
+msgid "&About %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:902 src/slic3r/GUI/MainFrame.cpp:905
+msgid "Show about dialog"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:908
+msgid "Show the list of the keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:922
+msgid "Iso"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:922
+msgid "Iso View"
+#: src/libslic3r/PrintConfig.cpp:3737
+msgstr ""
+msgid "Top"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:926
+msgid "Top View"
+#: src/libslic3r/PrintConfig.cpp:3383
+msgstr ""
+msgid "Bottom"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:929
+msgid "Bottom View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:931
+msgid "Front"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:931
+msgid "Front View"
+#: src/libslic3r/PrintConfig.cpp:2919
+msgstr ""
+msgid "Rear"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:933
+msgid "Rear View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:935
+msgid "Left"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:935
+msgid "Left View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:937
+msgid "Right"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:937
+msgid "Right View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:950
+msgid "&New Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:950
+msgid "Start a new project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:953
+msgid "&Open Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:953
+msgid "Open a project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:958
+msgid "Recent projects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:967
+msgid "The selected project is no longer available.\nDo you want to remove it from the recent projects list?"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:261
+msgstr ""
+msgid "Error"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:992
+msgid "&Save Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:992
+msgid "Save current project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
+msgid "Save Project &as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:996 src/slic3r/GUI/MainFrame.cpp:998
+msgid "Save current project file as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1006
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1006
+msgid "Load a model"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1010
+msgid "Import STL (imperial units)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1010
+msgid "Load an model saved with imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1014
+msgid "Import SL1 archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1014
+msgid "Load an SL1 archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1019
+msgid "Import &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1019
+msgid "Load exported configuration file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1022
+msgid "Import Config from &project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1022
+msgid "Load configuration from project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1026
+msgid "Import Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1026
+msgid "Load presets from a bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1029
+msgid "&Import"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1346
+msgid "Export &G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1032
+msgid "Export current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1036 src/slic3r/GUI/MainFrame.cpp:1347
+msgid "S&end G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1036
+msgid "Send to print current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1040
+msgid "Export G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1040
+msgid "Export current plate as G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1044
+msgid "Export plate as &STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1044
+msgid "Export current plate as STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1047
+msgid "Export plate as STL &including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1047
+msgid "Export current plate as STL including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Export plate as &AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Export current plate as AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
+msgid "Export &toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1054 src/slic3r/GUI/MainFrame.cpp:1298
+msgid "Export toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Export &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Export current configuration to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1061
+msgid "Export Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1061
+msgid "Export all presets to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1064
+msgid "Export Config Bundle With Physical Printers"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1064
+msgid "Export all presets including physical printers to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1067
+msgid "&Export"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1069
+msgid "Ejec&t SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1069
+msgid "Eject SD card / Flash drive after the G-code was exported to it."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1077
+msgid "Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1077
+msgid "Slice a file into a G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Quick Slice and Save As"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Slice a file into a G-code, save as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1089
+msgid "Repeat Last Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1089
+msgid "Repeat last quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "(Re)Slice No&w"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "Start new slicing process"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1101
+msgid "&Repair STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1101
+msgid "Automatically repair an STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1105
+msgid "&G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1108 src/slic3r/GUI/MainFrame.cpp:1305
+msgid "&Quit"
+msgstr ""
+#, possible-c-format
+msgid "Quit %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1123
+msgid "&Select all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1124
+msgid "Selects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1126
+msgid "D&eselect all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1127
+msgid "Deselects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1130
+msgid "&Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1131
+msgid "Deletes the current selection"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1133
+msgid "Delete &all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1134
+msgid "Deletes all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1138
+msgid "&Undo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1141
+msgid "&Redo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1146
+msgid "&Copy"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1147
+msgid "Copy selection to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1149
+msgid "&Paste"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1150
+msgid "Paste clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1154
+msgid "Re&load from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1155
+msgid "Reload the plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1159
+msgid "Searc&h"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1160
+msgid "Search in settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1168
+msgid "&Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1168
+msgid "Show the plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1173
+msgid "P&rint Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1173
+msgid "Show the print settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1176 src/slic3r/GUI/MainFrame.cpp:1349
+msgid "&Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1176
+msgid "Show the filament settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1180
+msgid "Print&er Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1180
+msgid "Show the printer settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
+msgid "3&D"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
+msgid "Show the 3D editing view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1189
+msgid "Pre&view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1189
+msgid "Show the 3D slices preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1195
+msgid "Print &Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1195
+msgid "Display the Print Host Upload Queue window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1210
+msgid "Show &labels"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1210
+msgid "Show object/instance labels in 3D scene"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1213
+msgid "&Collapse sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1213 src/slic3r/GUI/Plater.cpp:2231
+msgid "Collapse sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1223
+msgid "Introduction"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1223
+msgid "How to use this menu and calibrations."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "Bed/Extruder levelling"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "Create a test print to help you to level your printer bed."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "Filament Flow calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "Create a test print to help you to set your filament extrusion multiplier."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1231
+msgid "Filament temperature calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1231
+msgid "Create a test print to help you to set your filament temperature."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1233
+msgid "Extruder retraction calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1233
+msgid "Create a test print to help you to set your retraction length."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1236
+msgid "Bridge flow calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1236
+msgid "Create a test print to help you to set your bridge flow ratio."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1238
+msgid "Ironing pattern calibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1238
+msgid "Create a test print to help you to set your over-bridge flow ratio and ironing pattern."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1241
+msgid "Calibration cube"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1241
+msgid "Print a calibration cube, for various calibration goals."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1250
+msgid "FreeCad python script"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1250
+msgid "Create an object by writing little easy script."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1252
+msgid "Script help page"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1252
+msgid "How to use the FreeCad python script window."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1264 src/slic3r/GUI/MainFrame.cpp:1320
+msgid "&File"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1265
+msgid "&Edit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1266
+msgid "&Window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1267 src/slic3r/GUI/MainFrame.cpp:1321
+msgid "&View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1268
+msgid "C&alibration"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1269
+msgid "&Generate"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1272 src/slic3r/GUI/MainFrame.cpp:1324
+msgid "&Help"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1294
+msgid "&Open G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1294
+msgid "Open a G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Open &SuperSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Open SuperSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1346
+msgid "E&xport"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1347
+msgid "S&end to print"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1349
+msgid "Mate&rial Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1372
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1383
+msgid "No previously sliced file."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1389
+msgid "Previously sliced file ("
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1389
+msgid ") not found."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1390
+msgid "File Not Found"
+msgstr ""
+#, possible-c-format
+msgid "Save %s file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1425
+msgid "SVG"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1425
+msgid "G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1437
+msgid "Save zip file as:"
+#: src/slic3r/GUI/Plater.cpp:5346 src/slic3r/GUI/Tab.cpp:4229
+msgstr ""
+msgid "Slicing"
+msgstr ""
+#, possible-c-format
+msgid "Processing %s"
+msgstr ""
+#, possible-c-format
+msgid "%1% was successfully sliced."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1473
+msgid "Slicing Done!"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1488
+msgid "Select the STL file to repair:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1498
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1510
+msgid "Your file was repaired."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1510 src/libslic3r/PrintConfig.cpp:5763
+msgid "Repair"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1524
+msgid "Save configuration as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1543 src/slic3r/GUI/MainFrame.cpp:1605
+msgid "Select configuration to load:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1579
+msgid "Save presets bundle as:"
+msgstr ""
+#, possible-c-format
+msgid "%d presets successfully imported."
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:462
+msgid "3Dconnexion settings"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:473
+msgid "Device:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:478
+msgid "Speed:"
+#: src/slic3r/GUI/Mouse3DController.cpp:502
+msgstr ""
+msgid "Translation"
+#: src/slic3r/GUI/Mouse3DController.cpp:502
+msgstr ""
+msgid "Zoom"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:499
+msgid "Deadzone:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:514
+msgid "Options:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:517
+msgid "Swap Y/Z axes"
+msgstr ""
+#, possible-c-format
+msgid "%s error"
+msgstr ""
+#, possible-c-format
+msgid "%s has encountered an error"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:395
+msgid "3D Mouse disconnected."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:398
+msgid "Configuration update is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:398
+msgid "See more."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:400
+msgid "New version is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:400
+msgid "See Releases page."
+#: src/slic3r/GUI/NotificationManager.cpp:399
+msgstr ""
+msgid "More"
+#: src/slic3r/GUI/NotificationManager.cpp:963
+msgstr ""
+msgid "Export G-Code."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:736
+msgid "Open Folder."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:774
+msgid "Eject drive"
+#: src/slic3r/GUI/NotificationManager.cpp:909
+msgstr ""
+msgid "ERROR:"
+#: src/slic3r/GUI/NotificationManager.cpp:917
+msgstr ""
+msgid "WARNING:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:966
+msgid "Slicing finished."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1009
+msgid "Exporting finished."
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:58
+msgid "Instances"
+msgstr ""
+#, possible-c-format
+msgid "Instance %d"
+#: src/slic3r/GUI/Tab.cpp:4158
+msgstr ""
+msgid "Layers"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
+msgid "Range"
+msgstr ""
+#, possible-c-format
+msgid "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:262
+msgid "You may need to update your graphics card driver."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:265
+msgid "As a workaround, you may run PrusaSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw_renderer parameter."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:267
+msgid "Unsupported OpenGL version"
+msgstr ""
+#, possible-c-format
+msgid "Unable to load the following shaders:\n%s"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:276
+msgid "Error loading shaders"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51
+msgid "Delete this preset from this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81
+msgid "This printer will be shown in the presets list as"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155
+msgid "Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161
+msgid "Type here the name of your printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172
+msgid "Descriptive name for the printer"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
+msgid "Add preset for this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205
+msgid "Print Host upload"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
+msgid "Test"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:342
+msgid "Could not get a valid Printer Host reference"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:354
+msgid "Success!"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
+msgid "Refresh Printers"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:391
+msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:401
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:402
+msgid "Open CA certificate file"
+#: src/libslic3r/PrintConfig.cpp:163 src/libslic3r/PrintConfig.cpp:2487
+msgstr ""
+msgid "HTTPS CA File"
+msgstr ""
+#, possible-c-format
+msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432
+msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:584
+msgid "The supplied name is empty. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:588
+msgid "You should to change a name of your printer device. It can't be saved."
+msgstr ""
+#, possible-c-format
+msgid "Printer with name \"%1%\" already exists."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:597
+msgid "Replace?"
+msgstr ""
+#, possible-c-format
+msgid "Following printer preset(s) is duplicated:%1%The above preset for printer \"%2%\" will be used just once."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:666
+msgid "It's not possible to delete the last related preset for the printer."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
+msgid "Infornation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:163
+msgid "Volume"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:164
+msgid "Facets"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:165
+msgid "Materials"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:168
+msgid "Manifold"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:218
+msgid "Sliced Info"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1145
+msgid "Used Filament (m)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1167
+msgid "Used Filament (mm³)"
+#: src/slic3r/GUI/Plater.cpp:1186
+msgstr ""
+msgid "Used Filament (g)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:240
+msgid "Used Material (unit)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:241
+msgid "Cost (money)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:243
+msgid "Number of tool changes"
+#: src/slic3r/GUI/Tab.cpp:4163
+msgstr ""
+msgid "Supports"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:360
+msgid "Select what kind of support do you need"
+#: src/libslic3r/PrintConfig.cpp:4575
+msgstr ""
+msgid "Support on build plate only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:486
+msgid "For support enforcers only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:364
+msgid "Everywhere"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:396
+msgid "Brim"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:398
+msgid "This flag enables the brim that will be printed around each object on the first layer."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:406
+msgid "Purging volumes"
+#: src/slic3r/GUI/Tab.cpp:4204 src/slic3r/GUI/Tab.cpp:4275
+msgstr ""
+msgid "Pad"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:500
+msgid "Select what kind of pad do you need"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:502
+msgid "Below object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:503
+msgid "Around object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:689
+msgid "SLA print settings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:750 src/slic3r/GUI/Plater.cpp:5812
+msgid "Send to printer"
+#: src/slic3r/GUI/Plater.cpp:5349
+msgstr ""
+msgid "Slice now"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:920
+msgid "Hold Shift to Slice & Export G-code"
+msgstr ""
+#, possible-c-format
+msgid "%d (%d shells)"
+msgstr ""
+#, possible-c-format
+msgid "Auto-repaired (%d errors)"
+msgstr ""
+#, possible-c-format
+msgid "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d facets reversed, %d backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1083
+msgid "Yes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1104
+msgid "Used Material (ml)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1107
+msgid "object(s)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1107
+msgid "supports and pad"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1145
+msgid "Used Filament (in)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
+msgid "objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1147 src/slic3r/GUI/Plater.cpp:1228
+msgid "wipe tower"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1167
+msgid "Used Filament (in³)"
+#: src/libslic3r/PrintConfig.cpp:4390 src/libslic3r/PrintConfig.cpp:4391
+msgstr ""
+msgid "Cost"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1244
+msgid "normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1254
+msgid "stealth mode"
+msgstr ""
+#, possible-c-format
+msgid "%s - Drop project file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1426
+msgid "Open as project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1427
+msgid "Import geometry only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1428
+msgid "Import config only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1431
+msgid "Select an action to apply to the file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1432
+msgid "Action"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1440
+msgid "Don't show again"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1479
+msgid "You can open only one .gcode file at a time."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1480
+msgid "Drag and drop G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1534 src/slic3r/GUI/Plater.cpp:4735
+msgid "Import Object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1556
+msgid "Load File"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1561
+msgid "Load Files"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1663
+msgid "Fill bed"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1669
+msgid "Optimize Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1675
+msgid "Import SLA archive"
+msgstr ""
+#, possible-c-format
+msgid "Successfully unmounted. The device %s(%s) can now be safely removed from the computer."
+msgstr ""
+#, possible-c-format
+msgid "Ejecting of device %s(%s) has failed."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2149
+msgid "New Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2230
+msgid "Expand sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2303
+msgid "Loading"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2313
+msgid "Loading file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2407
+msgid "This file contains several objects positioned at multiple heights.\nInstead of considering them as multiple objects, should I consider\nthis file as a single object having multiple parts?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2410 src/slic3r/GUI/Plater.cpp:2463
+msgid "Multi-part object detected"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2417
+msgid "This file cannot be loaded in a simple mode. Do you want to switch to an advanced mode?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2418
+msgid "Detected advanced data"
+msgstr ""
+#, possible-c-format
+msgid "You can't to add the object(s) from %s because of one or some of them is(are) multi-part"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2460
+msgid "Multiple objects were loaded for a multi-material printer.\nInstead of considering them as multiple objects, should I consider\nthese files to represent a single object having multiple parts?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2477
+msgid "Loaded"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2579
+msgid "Your object appears to be too large, so it was automatically scaled down to fit your print bed."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2580
+msgid "Object too large?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2642
+msgid "Export STL file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2649
+msgid "Export AMF file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2655
+msgid "Save file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2661
+msgid "Export OBJ file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2757
+msgid "Delete Object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2768
+msgid "Reset Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2840
+msgid "The selected object can't be split because it contains more than one volume/material."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2851
+msgid "Split to Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2977 src/slic3r/GUI/Plater.cpp:3661
+msgid "Invalid data"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2987
+msgid "Ready to slice"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3025 src/slic3r/GUI/PrintHostDialogs.cpp:262
+msgid "Cancelling"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3044
+msgid "Another export job is currently running."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3161
+msgid "Please select the file to reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3196
+msgid "It is not allowed to change the file to reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3196
+msgid "Do you want to retry"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3214
+msgid "Reload from:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3305
+msgid "Unable to reload:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3310
+msgid "Error during reload"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3329
+msgid "Reload all from disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3350
+msgid "Fix Throught NetFabb"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3619
+msgid "There are active warnings concerning sliced models:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3630
+msgid "generated warnings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/PrintHostDialogs.cpp:263
+msgid "Cancelled"
+msgstr "מבוטל"
+
+#: src/slic3r/GUI/Plater.cpp:3933 src/slic3r/GUI/Plater.cpp:3957
+msgid "Remove the selected object"
+msgstr "הסר את האובייקט שנבחר"
+
+#: src/slic3r/GUI/Plater.cpp:3942
+msgid "Add one more instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3944
+msgid "Remove one instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3946
+msgid "Set number of instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3946
+msgid "Change the number of instances of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3948
+msgid "Fill bed with instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3948
+msgid "Fill the remaining area of bed with instances of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3967
+msgid "Reload the selected object from disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3970
+msgid "Export the selected object as STL file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4001
+msgid "Along X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4001
+msgid "Mirror the selected object along the X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4003
+msgid "Along Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4003
+msgid "Mirror the selected object along the Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4005
+msgid "Along Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4005
+msgid "Mirror the selected object along the Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4008
+msgid "Mirror"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4008
+msgid "Mirror the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4020
+msgid "To objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4020 src/slic3r/GUI/Plater.cpp:4040
+msgid "Split the selected object into individual objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4022
+msgid "To parts"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4022 src/slic3r/GUI/Plater.cpp:4058
+msgid "Split the selected object into individual sub-parts"
+#: src/slic3r/GUI/Plater.cpp:4058 src/libslic3r/PrintConfig.cpp:5787
+msgstr ""
+msgid "Split"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4025
+msgid "Split the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4047
+msgid "Optimize orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4048
+msgid "Optimize the rotation of the object for better print results."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4128
+msgid "3D editor view"
+msgstr ""
+#, possible-c-format
+msgid "%1% printer was active at the time the target Undo / Redo snapshot was taken. Switching to %1% printer requires reloading of %1% presets."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4707
+msgid "Load Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4739
+msgid "Import Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4808
+msgid "The selected file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4808
+msgid "does not contain valid gcode."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4809
+msgid "Error while loading .gcode file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4863
+msgid "All objects will be removed, continue?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4871
+msgid "Delete Selected Objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4879
+msgid "Increase Instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4913
+msgid "Decrease Instances"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4944
+msgid "Enter the number of copies:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:4945
+msgid "Copies of the selected object"
+msgstr ""
+#, possible-c-format
+msgid "Set numbers of copies to %d"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5015
+msgid "Cut by Plane"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5069
+msgid "Save G-code file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5069
+msgid "Save SL1 file as:"
+msgstr ""
+#, possible-c-format
+msgid "STL file exported to %s"
+msgstr ""
+#, possible-c-format
+msgid "AMF file exported to %s"
+msgstr ""
+#, possible-c-format
+msgid "Error exporting AMF file %s"
+msgstr ""
+#, possible-c-format
+msgid "3MF file exported to %s"
+msgstr ""
+#, possible-c-format
+msgid "Error exporting 3MF file %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5811
+msgid "Export"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:5906
+msgid "Paste From Clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:24
+msgid "General"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:48
+msgid "Remember output directory"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:50
+msgid "If this is enabled, Slic3r will prompt the last output directory instead of the one containing the input files."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:56
+msgid "Auto-center parts"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:58
+msgid "If this is enabled, Slic3r will auto-center objects around the print bed center."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:64
+msgid "Background processing"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:66
+msgid "If this is enabled, Slic3r will pre-process objects as soon as they're loaded in order to save time when exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:75
+msgid "If enabled, SuperSlicer will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). This is only a notification mechanisms, no automatic installation is done."
+msgstr "If enabled, SuperSlicer will check for the new versions of itself online. When a new version becomes available a notification is displayed at the next application startup (never during program usage). זהו מנגנון התראה בלבד, לא מתבצעת התקנה אוטומטית."
+
+#: src/slic3r/GUI/Preferences.cpp:81
+msgid "Export sources full pathnames to 3mf and amf"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:83
+msgid "If enabled, allows the Reload from disk command to automatically find and load the files when invoked."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:91
+msgid "If enabled, Slic3r downloads updates of built-in system presets in the background. These updates are downloaded into a separate temporary location. When a new preset version becomes available it is offered at application startup."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:96
+msgid "Suppress \" - default - \" presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:98
+msgid "Suppress \" - default - \" presets in the Print / Filament / Printer selections once there are any other valid presets available."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:104
+msgid "Show incompatible print and filament presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:106
+msgid "When checked, the print and filament presets are shown in the preset editor even if they are marked as incompatible with the active printer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:112
+msgid "Main GUI always in expert mode"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:114
+msgid "If enabled, the gui will be in expert mode even if the simple or advanced mode is selected (but not the setting tabs)."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:119
+msgid "Show drop project dialog"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:121
+msgid "When checked, whenever dragging and dropping a project file on the application, shows a dialog asking to select the action to take on the file to load."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:126 src/libslic3r/PrintConfig.cpp:5814
+msgid "Single instance mode"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:129
+msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:131
+msgid "If this is enabled, when starting PrusaSlicer and another instance of the same PrusaSlicer is already running, that instance will be reactivated instead."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:139
+msgid "Use Retina resolution for the 3D scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:141
+msgid "If enabled, the 3D scene will be rendered in Retina resolution. If you are experiencing 3D performance problems, disabling this option may help."
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
+msgstr ""
+msgid "Ask for unsaved changes when closing application"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:160
+msgid "When closing the application, always ask for unsaved changes"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+msgstr ""
+msgid "Ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:167
+msgid "Always ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:173 src/slic3r/GUI/Preferences.cpp:175
+msgid "Show splash screen"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:182
+msgid "Paths"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:187
+msgid "FreeCAD path"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:189
+msgid "If it point to a valid freecad instance (the bin directory or the python executable), you can use the built-in python script to quickly generate geometry."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:197
+msgid "Camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:203
+msgid "Use perspective camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:205
+msgid "If enabled, use perspective camera. If not enabled, use orthographic camera."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:210
+msgid "Use free camera"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:212
+msgid "If enabled, use free camera. If not enabled, use constrained camera."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:217
+msgid "Reverse direction of zoom with mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:219
+msgid "If enabled, reverses the direction of zoom with mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:226
+msgid "GUI"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:237
+msgid "Show sidebar collapse/expand button"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:239
+msgid "If enabled, the button for the collapse sidebar will be appeared in top right corner of the 3D Scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:244
+msgid "Use custom size for toolbar icons"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:246
+msgid "If enabled, you can change size of toolbar icons manually."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:252
+msgid "Sequential slider applied only to top layer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:254
+msgid "If enabled, changes made using the sequential slider, in preview, apply only to gcode top layer. If disabled, changes made using the sequential slider, in preview, apply to the whole gcode."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:260
+msgid "Suppress to open hyperlink in browser"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:262
+msgid "If enabled, the descriptions of configuration parameters in settings tabs woldn't work as hyperlinks. If disabled, the descriptions of configuration parameters in settings tabs will work as hyperlinks."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:279
+msgid "Render"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:285
+msgid "Use environment map"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:287
+msgid "If enabled, renders object using the environment map."
+msgstr ""
+#, possible-c-format
+msgid "You need to restart %s to make the changes effective."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:397
+msgid "Icon size in a respect to the default size"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:412
+msgid "Select toolbar icon size in respect to the default one."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:443
+msgid "Old regular layout with the tab bar"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:444
+msgid "New layout, access via settings button in the top menu"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:445
+msgid "Settings in non-modal window"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:454
+msgid "Layout Options"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:960
+msgstr ""
+msgid "System presets"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:964
+msgstr ""
+msgid "User presets"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:241
+msgid "Incompatible presets"
+msgstr ""
+#, possible-c-format
+msgid "Are you sure you want to delete \"%1%\" printer?"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:278
+msgid "Delete Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:615
+msgid "Click to edit preset"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:701
+msgstr ""
+msgid "Add/Remove presets"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:3040
+msgstr ""
+msgid "Add physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:690
+msgid "Edit preset"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:3040
+msgid "Edit physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:697
+msgid "Delete physical printer"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:978
+msgstr ""
+msgid "Physical printers"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:841
+msgid "Add/Remove filaments"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:843
+msgid "Add/Remove materials"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1002
+msgstr ""
+msgid "Add/Remove printers"
+msgstr ""
+#, possible-c-format
+msgid "will run at %1%%% by default"
+msgstr ""
+#, possible-c-format
+msgid "at %1%%% over external perimeters"
+msgstr ""
+#, possible-c-format
+msgid "at %1%%% over top fill surfaces"
+msgstr ""
+#, possible-c-format
+msgid "at %1%%% over bridges"
+msgstr ""
+#, possible-c-format
+msgid "except for the first %1% layers where the fan is disabled"
+#: src/slic3r/GUI/PresetHints.cpp:102
+msgstr ""
+msgid "except for the first layer where the fan is disabled"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:60
+msgid "will be turned off by default."
+msgstr ""
+#, possible-c-format
+msgid "\n\nIf estimated layer time is below ~%1%s, but still greater than ~%2%s, fan will run at a proportionally increasing speed between %3%%% and %4%%%"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:74 src/slic3r/GUI/PresetHints.cpp:82
+msgid "if it's above the current computed fan speed value"
+msgstr ""
+#, possible-c-format
+msgid "\n\nIf estimated layer time is below ~%1%s"
+msgstr ""
+#, possible-c-format
+msgid "fan will run by default to %1%%%"
+msgstr ""
+#, possible-c-format
+msgid "print speed will be reduced so that no less than %1%s are spent on that layer"
+msgstr ""
+#, possible-c-format
+msgid "(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)"
+msgstr ""
+#, possible-c-format
+msgid "(however, speed will never be reduced below %1%mm/s)"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:236
+msgid "external perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:245
+msgid "perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:254
+msgid "infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:264
+msgid "solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:272
+msgid "top solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:283
+msgid "support"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:293
+msgid "support interface"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "First layer volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "Bridging volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:299
+msgid "Volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:300
+msgid "flow rate is maximized"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:303
+msgid "by the print profile maximum"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:304
+msgid "when printing"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:305
+msgid "with a volumetric rate"
+msgstr ""
+#, possible-c-format
+msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:327
+msgid "Recommended object min thin wall thickness: Not available due to invalid layer height."
+msgstr ""
+#, possible-c-format
+msgid "Recommended object min (thick) wall thickness for layer height %.2f and"
+msgstr ""
+#, possible-c-format
+msgid "%d perimeter: %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:357
+msgid "Recommended object thin wall thickness: Not available due to excessively small extrusion width."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:381
+msgid "Ideally, the spacing between two extrusions shouldn't be lower than the nozzle diameter. Below are the extrusion widths for a spacing equal to the nozzle diameter.\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:382
+msgid "Recommended min extrusion width for the first layer (with a first layer height of %1%) is %2$.3f mm (or %3%%%)\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:384
+msgid "Recommended min extrusion width for other layers (with a layer height of %1%) is %2$.3f mm (or %3%%%).\n"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:413
+msgid "Top / bottom shell thickness hint: Not available due to invalid layer height."
+msgstr ""
+#, possible-c-format
+msgid "Top shell is %1% mm thick for layer height %2% mm."
+msgstr ""
+#, possible-c-format
+msgid "Minimum top shell thickness is %1% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:432
+msgid "Top is open."
+msgstr ""
+#, possible-c-format
+msgid "Bottom shell is %1% mm thick for layer height %2% mm."
+msgstr ""
+#, possible-c-format
+msgid "Minimum bottom shell thickness is %1% mm."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:451
+msgid "Bottom is open."
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
+msgid "Send G-Code to printer host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:34
+msgid "Upload to Printer Host with the following filename:"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:36
+msgid "Start printing after upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:44
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:57
+msgid "Group"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:176
+msgid "ID"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:177
+msgid "Progress"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:178
+msgid "Status"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:179
+msgid "Host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:180
+msgid "Filename"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:181
+msgid "Error Message"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:184
+msgid "Cancel selected"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:186
+msgid "Show error message"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:259
+msgstr ""
+msgid "Enqueued"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:260
+msgid "Uploading"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:264
+msgid "Completed"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:302
+msgid "Error uploading to print host:"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+#: src/libslic3r/PrintConfig.cpp:4446
+msgstr ""
+msgid "s"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+#: src/libslic3r/PrintConfig.cpp:2345
+msgstr ""
+msgid "mm³/s"
+msgstr ""
+#, possible-c-format
+msgid "Save %s as:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:110
+msgid "the following suffix is not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:116
+msgid "The supplied name is not available."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:122
+msgid "Cannot overwrite a system profile."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:127
+msgid "Cannot overwrite an external profile."
+msgstr ""
+#, possible-c-format
+msgid "Preset with name \"%1%\" already exists."
+msgstr ""
+#, possible-c-format
+msgid "Preset with name \"%1%\" already exists and is imcopatible with selected printer."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:137
+msgid "Note: This preset will be replaced after saving"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:142
+msgid "The name cannot be empty."
+#: src/slic3r/GUI/SavePresetDialog.cpp:182
+msgstr ""
+msgid "Save preset"
+msgstr ""
+#, possible-c-format
+msgid "You have selected physical printer \"%1%\" \nwith related printer preset \"%2%\""
+msgstr ""
+#, possible-c-format
+msgid "What would you like to do with \"%1%\" preset after saving?"
+msgstr ""
+#, possible-c-format
+msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
+msgstr ""
+#, possible-c-format
+msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
+msgstr ""
+#, possible-c-format
+msgid "Just switch to \"%1%\" preset"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2447
+msgid "Stealth"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2441
+msgid "Normal"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:172
+msgid "Selection-Add"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:213
+msgid "Selection-Remove"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:245
+msgid "Selection-Add Object"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:264
+msgid "Selection-Remove Object"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:282
+msgid "Selection-Add Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:301
+msgid "Selection-Remove Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:402
+msgid "Selection-Add All"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:428
+msgid "Selection-Remove All"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:987
+msgid "Scale To Fit"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:1514
+msgid "Set Printable Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:1514
+msgid "Set Unprintable Instance"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:81
+msgid "System Information"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:157
+msgid "Copy to Clipboard"
+msgstr "העתק ללוח"
+
+#: src/slic3r/GUI/Tab.cpp:118 src/libslic3r/PrintConfig.cpp:491
+msgid "Compatible printers"
+msgstr "מדפסות תואמות"
+
+#: src/slic3r/GUI/Tab.cpp:119
+msgid "Select the printers this profile is compatible with."
+msgstr "בחר את המדפסות שאליהן הפרופיל תואם."
+
+#: src/slic3r/GUI/Tab.cpp:124 src/libslic3r/PrintConfig.cpp:506
+msgid "Compatible print profiles"
+msgstr "פרופילי הדפסה תואמים"
+
+#: src/slic3r/GUI/Tab.cpp:125
+msgid "Select the print profiles this profile is compatible with."
+msgstr "בחר את פרופילי ההדפסה שאליהם הפרופיל תואם."
+#, possible-c-format
+msgid "Save current %s"
+msgstr "שמור את% s הנוכחי"
+
+#: src/slic3r/GUI/Tab.cpp:221
+msgid "Delete this preset"
+msgstr "מחק קביעה מוגדרת מראש זו"
+
+#: src/slic3r/GUI/Tab.cpp:225
+msgid "Hover the cursor over buttons to find more information \nor click this button."
+msgstr ""
+#, possible-c-format
+msgid "Search in settings [%1%]"
+msgstr "חפש בהגדרות [%1%]"
+
+#: src/slic3r/GUI/Tab.cpp:1240
+msgid "Detach from system preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1253
+msgid "A copy of the current system preset will be created, which will be detached from the system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1254
+msgid "The current custom preset will be detached from the parent system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1257
+msgid "Modifications to the current profile will be saved."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1260
+msgid "This action is not revertable.\nDo you want to proceed?"
+msgstr "פעולה זו אינה ניתנת לביטול.\n"
+"האם אתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/Tab.cpp:1262
+msgid "Detach preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1288
+msgid "This is a default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1290
+msgid "This is a system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1292
+msgid "Current preset is inherited from the default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1294
+msgid "Current preset is inherited from"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1298
+msgid "It can't be deleted or modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1299
+msgid "Any modifications should be saved as a new preset inherited from this one."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1300
+msgid "To do that please specify a new name for the preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1304
+msgid "Additional information:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1310
+msgid "printer model"
+msgstr "דגם מדפסת"
+
+#: src/slic3r/GUI/Tab.cpp:1318
+msgid "default print profile"
+msgstr "פרופיל הדפסה המוגדר כברירת מחדל"
+
+#: src/slic3r/GUI/Tab.cpp:1321
+msgid "default filament profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1335
+msgid "default SLA material profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1339
+msgid "default SLA print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1347
+msgid "full profile name"
+msgstr "שם פרופיל מלא"
+
+#: src/slic3r/GUI/Tab.cpp:1348
+msgid "symbolic profile name"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1540
+msgid "Single Extruder Multi Material is selected, \nand all extruders must have the same diameter.\nDo you want to change the diameter for all extruders to first extruder nozzle diameter value?"
+#: src/libslic3r/PrintConfig.cpp:2452
+msgstr ""
+msgid "Nozzle diameter"
+msgstr "קוטר הזרבובית"
+
+#: src/slic3r/GUI/Tab.cpp:1835
+msgid "Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into SuperSlicer/physical_printer directory."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1854
+msgid "Ramming settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1890
+msgid "Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1891
+msgid "Number of extruders of the printer."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1900
+msgid "Milling cutters"
+msgstr "חותכי כרסום"
+
+#: src/slic3r/GUI/Tab.cpp:1901
+msgid "Number of milling heads."
+msgstr "מספר ראשי הכירסום."
+
+#: src/slic3r/GUI/Tab.cpp:1920
+msgid "This is a single extruder multimaterial printer, diameters of all extruders will be set to the new value. Do you want to proceed?"
+msgstr "This is a single extruder multimaterial printer, diameters of all extruders will be set to the new value. האם אתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/Tab.cpp:1945
+msgid "Reset to Filament Color"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2082
+msgid "Filament Overrides"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2202
+msgid "Volumetric flow hints not available"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2414 src/slic3r/GUI/Tab.cpp:2520
+msgid "Machine limits"
+msgstr "מגבלות מכונה"
+
+#: src/slic3r/GUI/Tab.cpp:2417
+msgid "not-marlin/lerdge firmware compensation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2420
+msgid "Machine Limits"
+msgstr "מגבלות מכונה"
+
+#: src/slic3r/GUI/Tab.cpp:2440
+msgid "Values in this column are for Normal mode"
+msgstr "הערכים בעמודה זו הם עבור מצב רגיל"
+
+#: src/slic3r/GUI/Tab.cpp:2446
+msgid "Values in this column are for Stealth mode"
+msgstr "הערכים בעמודה זו הם עבור מצב שקט"
+
+#: src/slic3r/GUI/Tab.cpp:2456
+msgid "Maximum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2464
+msgid "Maximum accelerations"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2472
+msgid "Jerk limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2477
+msgid "Minimum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2548 src/slic3r/GUI/Tab.cpp:2557
+msgid "Single extruder MM setup"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2558
+msgid "Single extruder multimaterial parameters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2564
+msgid "Advanced wipe tower purge volume calculs"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2793
+msgid "The Wipe option is not available when using the Firmware Retraction mode.\n\nShall I disable it in order to enable Firmware Retraction?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2795
+msgid "Firmware Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3421
+msgid "Detached"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3488
+msgid "remove"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3488
+msgid "delete"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3497
+msgid "It's a last preset for this physical printer."
+msgstr ""
+#, possible-c-format
+msgid "Are you sure you want to delete \"%1%\" preset from the physical printer \"%2%\"?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3514
+msgid "The physical printer(s) below is based on the preset, you are going to delete."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3518
+msgid "Note, that selected preset will be deleted from this/those printer(s) too."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3522
+msgid "The physical printer(s) below is based only on the preset, you are going to delete."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3526
+msgid "Note, that this/those printer(s) will be deleted after deleting of the selected preset."
+msgstr ""
+#, possible-c-format
+msgid "Are you sure you want to %1% the selected preset?"
+msgstr ""
+#, possible-c-format
+msgid "%1% Preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3616 src/slic3r/GUI/Tab.cpp:3688
+msgid "Set"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3753
+msgid "Machine limits will be emitted to G-code and used to estimate print time. They are also used as safegard when generating gcode"
+#: src/slic3r/GUI/Tab.cpp:3767
+msgstr ""
+msgid "(even if the acceleration is set to 3000 in the print profile, if this is at 1500, it won't export a gcode that will tell to go over 1500)."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3757
+msgid "Grey values means that they can't be send to your firmware (no g-code available)."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3760
+msgid "Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. They are also used as safegard when generating gcode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3766
+msgid "Machine limits are used as safegard when generating gcode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3770
+msgid "Machine limits are disabled. They are not used for anything."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3842
+msgid "LOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3844
+msgstr ""
+msgid "indicates that the settings are the same as the system (or default) values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3846
+msgid "UNLOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3848
+msgstr ""
+msgid "indicates that some settings were changed and are not equal to the system (or default) values for the current option group.\nClick the UNLOCKED LOCK icon to reset all settings for current option group to the system (or default) values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3853
+msgid "WHITE BULLET"
+#: src/slic3r/GUI/Tab.cpp:3855
+msgstr ""
+msgid "for the left button: indicates a non-system (or non-default) preset,\nfor the right button: indicates that the settings hasn't been modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3858
+msgid "BACK ARROW"
+#: src/slic3r/GUI/Tab.cpp:3860
+msgstr ""
+msgid "indicates that the settings were changed and are not equal to the last saved preset for the current option group.\nClick the BACK ARROW icon to reset all settings for the current option group to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3870
+msgid "LOCKED LOCK icon indicates that the settings are the same as the system (or default) values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3872
+msgid "UNLOCKED LOCK icon indicates that some settings were changed and are not equal to the system (or default) values for the current option group.\nClick to reset all settings for current option group to the system (or default) values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3875
+msgid "WHITE BULLET icon indicates a non system (or non default) preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3878
+msgid "WHITE BULLET icon indicates that the settings are the same as in the last saved preset for the current option group."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3880
+msgid "BACK ARROW icon indicates that the settings were changed and are not equal to the last saved preset for the current option group.\nClick to reset all settings for the current option group to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3886
+msgid "LOCKED LOCK icon indicates that the value is the same as the system (or default) value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3887
+msgid "UNLOCKED LOCK icon indicates that the value was changed and is not equal to the system (or default) value.\nClick to reset current value to the system (or default) value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3893
+msgid "WHITE BULLET icon indicates that the value is the same as in the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3894
+msgid "BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4040 src/slic3r/GUI/Tab.cpp:4042
+msgid "Material"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4077
+msgid "Exposure"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4081
+msgid "Corrections"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4097 src/slic3r/GUI/Tab.cpp:4098
+msgid "Notes"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4105 src/slic3r/GUI/Tab.cpp:4238
+msgid "Dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4106 src/slic3r/GUI/Tab.cpp:4239
+msgid "Profile dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4156
+msgid "Layers and perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4166
+msgid "Support head"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4171
+msgid "Support pillar"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4194
+msgid "Connection of the support sticks and junctions"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4199
+msgid "Automatic generation"
+#: src/libslic3r/SLA/Hollowing.cpp:66 src/libslic3r/SLA/Hollowing.cpp:75
+msgstr ""
+msgid "Hollowing"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4228
+msgid "Advanced"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4232
+msgid "Output options"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4233
+msgid "Output file"
+msgstr ""
+#, possible-c-format
+msgid "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\nTo enable \"%1%\", please switch off \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4654
+msgid "Object elevation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275 src/libslic3r/PrintConfig.cpp:4758
+msgid "Pad around object"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:377 src/slic3r/GUI/Tab.hpp:510
+msgid "Print Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:409
+msgid "Filament Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:459
+msgid "Printer Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:494
+msgid "Material Settings"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
+msgstr ""
+msgid "Undef"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
+msgid "PrusaSlicer is closing: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
+msgid "Switching Presets: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
+msgid "Old Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
+msgid "New Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
+msgid "Transfer"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
+msgid "Discard"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
+msgid "Save"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
+msgid "PrusaSlicer will remember your action."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
+msgid "You will not be asked about the unsaved changes the next time you close PrusaSlicer."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
+msgid "You will not be asked about the unsaved changes the next time you switch a preset."
+msgstr ""
+#, possible-c-format
+msgid "Visit \"Preferences\" and check \"%1%\"\nto be asked about unsaved changes again."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
+msgid "PrusaSlicer: Don't ask me again"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
+msgid "Some fields are too long to fit. Right mouse click reveals the full text."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
+msgid "All settings changes will be discarded."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Save the selected options."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Transfer the selected settings to the newly selected preset."
+msgstr ""
+#, possible-c-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+#, possible-c-format
+msgid "Transfer the selected options to the newly selected preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1025
+msgid "The following presets were modified:"
+msgstr ""
+#, possible-c-format
+msgid "Preset \"%1%\" has the following unsaved changes:"
+msgstr ""
+#, possible-c-format
+msgid "Preset \"%1%\" is not compatible with the new printer profile and it has the following unsaved changes:"
+msgstr ""
+#, possible-c-format
+msgid "Preset \"%1%\" is not compatible with the new print profile and it has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
+msgid "Extruders count"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1088
+msgid "Capabilities"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1199
+msgid "Old value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
+msgid "New value"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:38
+msgid "Update available"
+msgstr ""
+#, possible-c-format
+msgid "New version of %s is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:43
+msgid "Current version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:45
+msgid "New version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:53
+msgid "Changelog && Download"
+#: src/slic3r/GUI/UpdateDialogs.cpp:183
+msgstr ""
+msgid "Open changelog page"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:65
+msgid "Open download page"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:71
+msgid "Don't notify about new releases any more"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
+msgid "Configuration update"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:89
+msgid "Configuration update is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:92
+msgid "Would you like to install it?\n\nNote that a full configuration snapshot will be created first. It can then be restored at any time should there be a problem with the new version.\n\nUpdated configuration bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
+msgid "Comment:"
+msgstr ""
+#, possible-c-format
+msgid "%s incompatibility"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:148
+msgid "You must install a configuration update."
+msgstr ""
+#, possible-c-format
+msgid "%s will now start updates. Otherwise it won't be able to start.\n\nNote that a full configuration snapshot will be created first. It can then be restored at any time should there be a problem with the new version.\n\nUpdated configuration bundles:"
+msgstr ""
+#, possible-c-format
+msgid "Exit %s"
+msgstr ""
+#, possible-c-format
+msgid "%s configuration is incompatible"
+msgstr ""
+#, possible-c-format
+msgid "This version of %s is not compatible with currently installed configuration bundles.\nThis probably happened as a result of running an older %s after using a newer one.\n\nYou may either exit %s and try again with a newer version, or you may re-run the initial configuration. Doing so will create a backup snapshot of the existing configuration before installing files compatible with this %s."
+msgstr ""
+#, possible-c-format
+msgid "This %s version: %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:230
+msgid "Incompatible bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:249
+msgid "Re-configure"
+msgstr ""
+#, possible-c-format
+msgid "%s now uses an updated configuration structure.\n\nSo called 'System presets' have been introduced, which hold the built-in default settings for various printers. These System presets cannot be modified, instead, users now may create their own presets inheriting settings from one of the System presets.\nAn inheriting preset may either inherit a particular value from its parent or override it with a customized value.\n\nPlease proceed with the %s that follows to set up the new presets and to choose whether to enable automatic preset updates."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:287
+msgid "For more information please visit Prusa wiki page:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:304
+msgid "Configuration updates"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:304
+msgid "No updates available"
+msgstr ""
+#, possible-c-format
+msgid "%s has no configuration updates available."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:15
+msgid "Ramming customization"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:41
+msgid "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n\nThis is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:83
+msgid "Total ramming time"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:85
+msgid "Total rammed volume"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:89
+msgid "Ramming line width"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:91
+msgid "Ramming line spacing"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:142
+msgid "Wipe tower - Purging volume adjustment"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:254
+msgid "Here you can adjust required purging volume (mm³) for any given pair of tools."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:255
+msgid "Extruder changed to"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:263
+msgid "unloaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:264
+msgid "loaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:276
+msgid "Tool #"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:285
+msgid "Total purging volume is calculated by summing two values below, depending on which tools are loaded/unloaded."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:286
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:300
+msgid "From"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:365
+msgid "Switching to simple settings will discard changes done in the advanced mode!\n\nDo you want to proceed?"
+msgstr "Switching to simple settings will discard changes done in the advanced mode!\n"
+"\n"
+"האם אתה רוצה להמשיך?"
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:377
+msgid "Show simplified settings"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:377
+msgid "Show advanced settings"
+msgstr ""
+#, possible-c-format
+msgid "Switch to the %s mode"
+msgstr ""
+#, possible-c-format
+msgid "Current mode is %s"
+msgstr ""
+#, possible-c-format
+msgid "Mismatched type of print host: %s"
+msgstr ""
+
+#: src/slic3r/Utils/AstroBox.cpp:84
+msgid "Connection to AstroBox works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/AstroBox.cpp:90
+msgid "Could not connect to AstroBox"
+msgstr ""
+
+#: src/slic3r/Utils/AstroBox.cpp:92
+msgid "Note: AstroBox version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:47
+msgid "Connection to Duet works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:53
+msgid "Could not connect to Duet"
+#: src/slic3r/Utils/FlashAir.cpp:159
+msgstr ""
+msgid "Unknown error occured"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:145
+msgid "Wrong password"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:148
+msgid "Could not get resources to create a new connection"
+#: src/slic3r/Utils/FixModelByWin10.cpp:359
+msgstr ""
+msgid "Exporting source model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing model by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+#: src/slic3r/Utils/FixModelByWin10.cpp:378
+msgstr ""
+msgid "Loading repaired model"
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgstr ""
+msgid "Saving mesh into the 3MF container failed."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:340
+msgid "Model fixing"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:341
+msgid "Exporting model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:368
+msgid "Export of a temporary 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:383
+msgid "Import of the repaired 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:385
+msgid "Repaired 3MF file does not contain any object"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:387
+msgid "Repaired 3MF file contains more than one object"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:389
+msgid "Repaired 3MF file does not contain any volume"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:391
+msgid "Repaired 3MF file contains more than one volume"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:400
+msgid "Model repair finished"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:406
+msgid "Model repair canceled"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+msgid "Model repaired successfully"
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgstr ""
+msgid "Model Repair by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model repair failed:"
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:58
+msgid "Upload not enabled on FlashAir card."
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:68
+msgid "Connection to FlashAir works correctly and upload is enabled."
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:74
+msgid "Could not connect to FlashAir"
+msgstr ""
+
+#: src/slic3r/Utils/FlashAir.cpp:76
+msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:83
+msgid "Connection to OctoPrint works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:89
+msgid "Could not connect to OctoPrint"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:91
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:185
+msgid "Connection to Prusa SL1 works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:191
+msgid "Could not connect to Prusa SLA"
+msgstr ""
+#, possible-c-format
+msgid "requires min. %s and max. %s"
+msgstr ""
+#, possible-c-format
+msgid "requires min. %s"
+msgstr ""
+#, possible-c-format
+msgid "requires max. %s"
+msgstr ""
+
+#: src/slic3r/Utils/Http.cpp:73
+msgid "Could not detect system SSL certificate store. PrusaSlicer will be unable to establish secure network connections."
+msgstr ""
+#, possible-c-format
+msgid "PrusaSlicer detected system SSL certificate store in: %1%"
+msgstr ""
+#, possible-c-format
+msgid "To specify the system certificate store manually, please set the %1% environment variable to the correct CA bundle and restart the application."
+msgstr ""
+
+#: src/slic3r/Utils/Http.cpp:91
+msgid "CURL init has failed. PrusaSlicer will be unable to establish network connections. See logs for additional details."
+msgstr ""
+
+#: src/slic3r/Utils/Process.cpp:151
+msgid "Open G-code file:"
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:640
+msgid "There is an object with no extrusions on the first layer."
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:658
+msgid "Empty layers detected, the output would not be printable."
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:659
+msgid "Print z"
+msgstr ""
+
+#: src/libslic3r/GCode.cpp:660
+msgid "This is usually caused by negligibly small extrusions or by a faulty model. Try to repair the model or change its orientation on the bed."
+#: src/libslic3r/PrintConfig.cpp:2070 src/libslic3r/PrintConfig.cpp:3509
+msgstr ""
+msgid "Ironing"
+msgstr ""
+
+#: src/libslic3r/ExtrusionEntity.cpp:288 src/libslic3r/ExtrusionEntity.cpp:332
+msgid "Mixed"
+msgstr ""
+#, possible-c-format
+msgid "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
+msgstr ""
+#, possible-c-format
+msgid "The selected 3mf file has been saved with a newer version of %1% and is not compatible."
+msgstr ""
+#, possible-c-format
+msgid "The selected amf file has been saved with a newer version of %1% and is not compatible."
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:91
+msgid "undefined error"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:93
+msgid "too many files"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:95
+msgid "file too large"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:97
+msgid "unsupported method"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:99
+msgid "unsupported encryption"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:101
+msgid "unsupported feature"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:103
+msgid "failed finding central directory"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:105
+msgid "not a ZIP archive"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:107
+msgid "invalid header or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:109
+msgid "unsupported multidisk archive"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:111
+msgid "decompression failed or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:113
+msgid "compression failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:115
+msgid "unexpected decompressed size"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:117
+msgid "CRC-32 check failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:119
+msgid "unsupported central directory size"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:121
+msgid "allocation failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:123
+msgid "file open failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:125
+msgid "file create failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:127
+msgid "file write failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:129
+msgid "file read failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:131
+msgid "file close failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:133
+msgid "file seek failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:135
+msgid "file stat failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:137
+msgid "invalid parameter"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:139
+msgid "invalid filename"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:141
+msgid "buffer too small"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:143
+msgid "internal error"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:145
+msgid "file not found"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:147
+msgid "archive is too large"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:149
+msgid "validation failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:151
+msgid "write calledback failed"
+msgstr ""
+
+#: src/libslic3r/Preset.cpp:1471
+msgid "filament"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1351
+msgid "All objects are outside of the print volume."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1354
+msgid "The supplied settings will cause an empty print."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1358
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1360
+msgid "Some objects are too tall and cannot be printed without extruder collisions."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1369
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1376
+msgid "The Spiral Vase option can only be used when printing single material objects."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1389
+msgid "The wipe tower is only supported if all extruders have the same nozzle diameter and use filaments of the same diameter."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1395
+msgid "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter and Repetier G-code flavors."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1397
+msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1399
+msgid "Ooze prevention is currently not supported with the wipe tower enabled."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1401
+msgid "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1403
+msgid "The Wipe Tower is currently not supported for multimaterial sequential prints."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1424
+msgid "The Wipe Tower is only supported for multiple objects if they have equal layer heights"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1426
+msgid "The Wipe Tower is only supported for multiple objects if they are printed over an equal number of raft layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1430
+msgid "The Wipe Tower is only supported for multiple objects if they are printed with the same support_material_contact_distance"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1432
+msgid "The Wipe Tower is only supported for multiple objects if they are sliced equally."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1474
+msgid "The Wipe tower is only supported if all objects have the same variable layer height"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1500
+msgid "One or more object were assigned an extruder that the printer does not have."
+msgstr ""
+#, possible-c-format
+msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
+msgstr ""
+#, possible-c-format
+msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1523
+msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current extruder (support_material_extruder == 0 or support_material_interface_extruder == 0), all nozzles have to be of the same diameter."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1531
+msgid "For the Wipe Tower to work with the soluble supports, the support layers need to be synchronized with the object layers."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1535
+msgid "The Wipe Tower currently supports the non-soluble supports only if they are printed with the current extruder without triggering a tool change. (both support_material_extruder and support_material_interface_extruder need to be set to 0)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1557
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1562
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1722
+msgid "Infilling layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1752
+msgid "Generating skirt"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1809
+msgid "Generating brim"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1871
+msgid "Exporting G-code"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1875
+msgid "Generating G-code"
+msgstr ""
+
+#: src/libslic3r/SLA/Pad.cpp:532
+msgid "Pad brim size is too small for the current configuration."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:628
+msgid "Cannot proceed without support points! Add support points or disable support generation."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:640
+msgid "Elevation is too low for object. Use the \"Pad around object\" feature to print the object without elevation."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:646
+msgid "The endings of the support pillars will be deployed on the gap between the object and the pad. 'Support base safety distance' has to be greater than the 'Pad object gap' parameter to avoid this."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:661
+msgid "Exposition time is out of printer profile bounds."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:668
+msgid "Initial exposition time is out of printer profile bounds."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:784
+msgid "Slicing done"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:44
+msgid "Hollowing model"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:45
+msgid "Drilling holes into model."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:46
+msgid "Slicing model"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:361
+msgid "Generating support points"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:48
+msgid "Generating support tree"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:49
+msgid "Generating pad"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:50
+msgid "Slicing supports"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:65
+msgid "Merging slices and calculating statistics"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:66
+msgid "Rasterizing layers"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:192
+msgid "Too many overlapping holes."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:201
+msgid "Drilling holes into the mesh failed. This is usually caused by broken model. Try to fix it first."
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:247
+msgid "Slicing had to be stopped due to an internal error: Inconsistent slice index."
+#: src/libslic3r/SLAPrintSteps.cpp:461
+msgstr ""
+msgid "Visualizing supports"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:453
+msgid "No pad can be generated for this model with the current configuration"
+msgstr ""
+
+#: src/libslic3r/SLAPrintSteps.cpp:621
+msgid "There are unprintable objects. Try to adjust support settings to make the objects printable."
+msgstr ""
+
+#: src/libslic3r/PrintBase.cpp:72
+msgid "Failed processing of the output_filename_format template."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:49 src/libslic3r/PrintConfig.cpp:50
+msgid "Printer technology"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:58
+msgid "Bed shape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:64
+msgid "Bed custom texture"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:70
+msgid "Bed custom model"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:76
+msgid "Thumbnails size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:77
+msgid "Picture sizes to be stored into a .gcode and .sl1 files"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:83
+msgid "Thumbnail color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:85
+msgid "This is the color that will be enforce on objects in the thumbnails."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:91
+msgid "Enforce thumbnail color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:92
+msgid "Enforce a specific color on thumbnails. If not enforced, their color will be the one defined by the filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:98
+msgid "Bed on thumbnail"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:99
+msgid "Show the bed texture on the thumbnail picture."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:104
+msgid "Support on thumbnail"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:105
+msgid "Show the supports (and pads) on the thumbnail picture."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:110
+msgid "Base Layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:112
+msgid "This setting controls the height (and thus the total number) of the slices/layers. Thinner layers give better accuracy but take more time to print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:120
+msgid "Max print height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:122
+msgid "Set this to the maximum height that can be reached by your extruder while printing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:130
+msgid "Slice gap closing radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:132
+msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:140 src/libslic3r/PrintConfig.cpp:2494
+msgid "Hostname, IP or URL"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:142 src/libslic3r/PrintConfig.cpp:2496
+msgid "Slic3r can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:148 src/libslic3r/PrintConfig.cpp:2479
+msgid "API Key / Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:150 src/libslic3r/PrintConfig.cpp:2481
+msgid "Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:157
+msgid "Name of the printer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:2488
+msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:180
+msgid "Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:186
+msgid "Printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid "Related printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:192
+msgid "Authorization Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:212
+msgid "Allow empty layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:214
+msgid "Do not prevent the gcode builder to trigger an exception if a full layer is empty and so the print will have to start from thin air afterward."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:219
+msgid "Avoid crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:221
+msgid "Optimize travel moves in order to minimize the crossing of perimeters. This is mostly useful with Bowden extruders which suffer from oozing. This feature slows down both the print and the G-code generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:228 src/libslic3r/PrintConfig.cpp:229
+msgid "Don't avoid crossing on 1st layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:231
+msgid "Do not use the 'Avoid crossing perimeters' on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:236 src/libslic3r/PrintConfig.cpp:3563
+msgid "Other layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:238
+msgid "Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:241
+msgid "Bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:248
+msgid "Before layer change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:250
+msgid "This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:260
+msgid "Between objects G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:262
+msgid "This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:273
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:274
+msgid "Bottom solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:281
+msgid "The number of bottom solid layers is increased above bottom_solid_layers if necessary to satisfy minimum thickness of bottom shell."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:283
+msgid "Minimum bottom shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:289 src/libslic3r/PrintConfig.cpp:339
+msgid "Bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:290
+msgid "Bridge acceleration"
+msgstr ""
+#, possible-c-format
+msgid "This is the acceleration your printer will use for bridges.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for bridges."
+#: src/libslic3r/PrintConfig.cpp:2633
+msgstr ""
+msgid "mm/s² or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:301
+msgid "Bridging"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:302
+msgid "Bridging angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:304
+msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for all bridges. Use 180° for zero angle."
+#: src/libslic3r/PrintConfig.cpp:4751
+msgstr ""
+msgid "°"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:313
+msgid "Bridges fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:315
+msgid "This fan speed is enforced during all bridges and overhangs. It won't slow down the fan if it's currently running at a higher speed.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers."
+#: src/libslic3r/PrintConfig.cpp:4670
+msgstr ""
+msgid "%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:326
+msgid "Top fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:328
+msgid "This fan speed is enforced during all top fills.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:340
+msgid "Bridge flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:343
+msgid "This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:353
+msgid "Above the bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:354
+msgid "Above bridge flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:357
+msgid "Flow ratio to compensate for the gaps in a bridged top surface. Used for ironing infillpattern to prevent regions where the low-flow pass does not provide a smooth surface due to a lack of plastic. You can increase it slightly to pull the top layer at the correct height. Recommended maximum: 120%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:366 src/libslic3r/PrintConfig.cpp:367
+msgid "Bridge overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:370
+msgid "Amount of overlap between lines of the bridge. If want more space between line (or less), you can modify it. Default to 100%. A value of 50% will create two times less lines."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:377
+msgid "Bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:378
+msgid "Bridge speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:380
+msgid "Speed for printing bridges."
+#: src/libslic3r/PrintConfig.cpp:3752 src/libslic3r/PrintConfig.cpp:4220
+msgstr ""
+msgid "mm/s"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:388
+msgid "Internal bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:389
+msgid "Internal bridge speed"
+msgstr ""
+#, possible-c-format
+msgid "Speed for printing the bridges that support the top layer.\nCan be a % of the bridge speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:400
+msgid "Brim inside holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:402
+msgid "Allow to create a brim over an island when it's inside a hole (or surrounded by an object)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:407
+msgid "Brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:409
+msgid "Horizontal width of the brim that will be printed around each object on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:416
+msgid "Interior Brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:418
+msgid "Horizontal width of the brim that will be printed inside each object on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:426
+msgid "Brim ears"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:428
+msgid "Only draw brim over the sharp edges of the model."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:433
+msgid "Max angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:435
+msgid "Maximum angle to let a brim ear appear. \nIf set to 0, no brim will be created. \nIf set to ~178, brim will be created on everything but strait sections."
+#: src/libslic3r/PrintConfig.cpp:3476 src/libslic3r/PrintConfig.cpp:3491
+msgstr ""
+msgid "Pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:444
+msgid "Ear pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:446
+msgid "Pattern for the ear. The concentric id the default one. The rectilinear has a perimeter around it, you can try it if the concentric has too many problems to stick to the build plate."
+#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:3505
+msgstr ""
+msgid "Concentric"
+#: src/libslic3r/PrintConfig.cpp:3503
+msgstr ""
+msgid "Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:456
+msgid "Brim offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:458
+msgid "Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior., so it has to be lower than them"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:465
+msgid "Chamber"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:466
+msgid "Chamber temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:468
+msgid "Chamber temperature0. Note that this setting doesn't do anything, but you can access it in Start G-code, Tool change G-code and the other ones, like for other temperature settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:476
+msgid "Clip multi-part objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:478
+msgid "When printing multi-material objects, this settings will make Slic3r to clip the overlapping object parts one by the other (2nd part will be clipped by the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:485
+msgid "Colorprint height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:487
+msgid "Heights at which a filament change is to occur. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:497
+msgid "Compatible printers condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:498
+msgid "A boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:512
+msgid "Compatible print profiles condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:513
+msgid "A boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:530
+msgid "Complete individual objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:532
+msgid "When printing multiple objects or copies, this feature will complete each object before moving onto next one (and starting it from its bottom layer). This feature is useful to avoid the risk of ruined prints. Slic3r should warn and prevent you from extruder collisions, but beware."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:540
+msgid "Allow only one skirt loop"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:542
+msgid "When using 'Complete individual objects', the default behavior is to draw the skirt around each object. if you prefer to have only one skirt for the whole plater, use this option."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:548
+msgid "Object sort"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:550
+msgid "When printing multiple objects or copies on after another, this will help you to choose how it's ordered.\nObject will sort them by the order of the right panel.\nLowest Y will sort them by their lowest Y point. Useful for printers with a X-bar.\nLowest Z will sort them by their height, useful for delta printers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:559
+msgid "Right panel"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:560
+msgid "lowest Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:561
+msgid "lowest Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:566
+msgid "Enable auto cooling"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:568
+msgid "This flag enables the automatic cooling logic that adjusts print speed and fan speed according to layer printing time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:574
+msgid "Cooling tube position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:576
+msgid "Distance of the center-point of the cooling tube from the extruder tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:583
+msgid "Cooling tube length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:585
+msgid "Length of the cooling tube to limit space for cooling moves inside it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:594
+msgid "Default acceleration"
+msgstr ""
+#, possible-c-format
+msgid "This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nYou can set it as a % of the max of the X/Y machine acceleration limit.\nSet zero to prevent resetting acceleration at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:605
+msgid "Default filament profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:606
+msgid "Default filament profile associated with the current printer profile. On selection of the current printer profile, this filament profile will be activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:612
+msgid "Default print profile"
+#: src/libslic3r/PrintConfig.cpp:4483
+msgstr ""
+msgid "Default print profile associated with the current printer profile. On selection of the current printer profile, this print profile will be activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:619
+msgid "Disable fan for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:621
+msgid "You can set this to a positive value to disable fan at all during the first layers, so that it does not make adhesion worse."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:630
+msgid "Don't support bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:632
+msgid "Experimental option for preventing support material from being generated under bridged areas."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:638
+msgid "Distance between objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:640
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:658
+msgid "End G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:649
+msgid "This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all Slic3r settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:659
+msgid "Filament end G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:661
+msgid "This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all Slic3r settings. If you have multiple extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:672
+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:674
+msgid "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:681
+msgid "Top Pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:683
+msgid "Fill pattern for top infill. This only affects the top visible layer, and not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:700 src/libslic3r/PrintConfig.cpp:730
+msgid "Monotonic (filled)"
+#: src/libslic3r/PrintConfig.cpp:3504
+msgstr ""
+msgid "Monotonic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:702
+msgid "Aligned Rectilinear"
+#: src/libslic3r/PrintConfig.cpp:761 src/libslic3r/PrintConfig.cpp:3506
+msgstr ""
+msgid "Concentric (filled)"
+#: src/libslic3r/PrintConfig.cpp:3507
+msgstr ""
+msgid "Hilbert Curve"
+#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1588
+msgstr ""
+msgid "Archimedean Chords"
+#: src/libslic3r/PrintConfig.cpp:764 src/libslic3r/PrintConfig.cpp:1589
+msgstr ""
+msgid "Octagram Spiral"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:708 src/libslic3r/PrintConfig.cpp:3508
+msgid "Sawtooth"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:714
+msgid "Bottom fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:716
+msgid "Fill pattern for bottom infill. This only affects the bottom visible layer, and not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:742
+msgid "Solid pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:744
+msgid "Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear is most cases. You can try ironing for transluscnet material. Rectilinear (filled) replace zig-zag patterns by a single big line & is more efficient for filling little spaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:758
+msgid "Rectilinear (filled)"
+msgstr ""
+#, possible-c-format
+msgid "Enforce 100% fill volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:771
+msgid "Experimental option which modifies (in solid infill) fill flow to have the exact amount of plastic inside the volume to fill (it generally changes the flow from -7% to +4%, depending on the size of the surface to fill and the overlap parameters, but it can go as high as +50% for infill in very small areas where rectilinear doesn't have good coverage). It has the advantage to remove the over-extrusion seen in thin infill areas, from the overlap ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:780
+msgid "Default infill margin"
+msgstr ""
+#, possible-c-format
+msgid "This parameter grows the top/bottom/solid layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the perimeters."
+#: src/libslic3r/PrintConfig.cpp:1638
+msgstr ""
+msgid "mm/%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:790
+msgid "Bridged"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:791
+msgid "Bridge margin"
+msgstr ""
+#, possible-c-format
+msgid "This parameter grows the bridged solid infill layers by the specified MM to anchor them into the part. Put 0 to deactivate it. Can be a % of the width of the external perimeter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:801
+msgid "External perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:802
+msgid "External perimeters width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:804
+msgid "Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.05 x nozzle diameter will be used. If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter."
+#: src/libslic3r/PrintConfig.cpp:4211
+msgstr ""
+msgid "mm or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:814
+msgid "Cutting corners"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:815
+msgid "Ext. peri. cut corners"
+msgstr ""
+#, possible-c-format
+msgid "Activate this option to modify the flow to acknoledge that the nozzle is round and the corners will have a round shape, and so change the flow to realized that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this change the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:826
+msgid "External perimeter fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:827
+msgid "When set to a non-zero value this fan speed is used only for external perimeters (visible ones). \nSet to 1 to disable the fan.\nSet to -1 to use the normal fan speed on external perimeters.External perimeters can benefit from higher fan speed to improve surface finish, while internal perimeters, infill, etc. benefit from lower fan speed to improve layer adhesion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:839
+msgid "external perimeter overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:840
+msgid "Ext. peri. overlap"
+msgstr ""
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use of it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:852
+msgid "perimeter overlap"
+msgstr "חפיפת היקף"
+
+#: src/libslic3r/PrintConfig.cpp:853
+msgid "Perimeter overlap"
+msgstr "חפיפה היקפית"
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters, to reduce the impact of the perimeters artifacts. 100% means that no gaps is left, and 0% means that perimeters are not touching each other anymore.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:865
+msgid "Better bonding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:866
+msgid "Perimeter bonding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:868
+msgid "This setting may degrad a bit the quality of your external perimeter, in exchange for a better bonding between perimeters.Use it if you have great difficulties with perimeter bonding, for example with high temperature filaments.\nThis percentage is the % of overlap between perimeters, a bit like perimeter_overlap and external_perimeter_overlap, but in reverse. You have to set perimeter_overlap and external_perimeter_overlap to 100%, or this setting has no effect. 0: no effect, 50%: half of the nozzle will be over an already extruded perimeter while extruding a new one, unless it's an external ones).\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:882
+msgid "External"
+msgstr "חיצוני"
+
+#: src/libslic3r/PrintConfig.cpp:883
+msgid "External perimeters speed"
+msgstr "מהירות היקף חיצוני"
+
+#: src/libslic3r/PrintConfig.cpp:885
+msgid "This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+#: src/libslic3r/PrintConfig.cpp:3719
+msgstr ""
+msgid "mm/s or %"
+msgstr "מ\"מ\\ש או %"
+
+#: src/libslic3r/PrintConfig.cpp:895
+msgid "first"
+msgstr "ראשון"
+
+#: src/libslic3r/PrintConfig.cpp:896
+msgid "External perimeters first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:898
+msgid "Print contour perimeters from the outermost one to the innermost one instead of the default inverse order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:904
+msgid "In vase mode (no seam)"
+msgstr "במצב אגרטל (ללא תפר)"
+
+#: src/libslic3r/PrintConfig.cpp:905
+msgid "ExternalPerimeter in vase mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:907
+msgid "Print contour perimeters in two circle, in a contiunous way, like for a vase mode. It needs the external_perimeters_first parameter do work. \nDoesn't work for the first layer, as it may damage the bed overwise. \nNote that It will use min_layer_height from your hardware setting as the base height (it doesn't start at 0), so be sure to put here the lowest value your printer can handle. if it's not lower than two times the current layer height, it falls back to the normal algorithm, as there are not enough room to do two loops."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:916
+msgid "Only for outer side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:917
+msgid "Ext peri first for outer side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:919
+msgid "Only do the vase trick on the external side. Useful when the thikness is too low."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "Only for inner side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:925
+msgid "ext peri first for inner side"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:927
+msgid "Only do the vase trick on the external side. Useful when you only want to remode seam from screw hole."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:936
+msgid "Perimeters loop"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:938
+msgid "Join the perimeters to create only one continuous extrusion without any z-hop. Long inside travel (from external to holes) are not extruded to give some space to the infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:944 src/libslic3r/PrintConfig.cpp:2907
+msgid "Seam position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:945
+msgid "Perimeter loop seam"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:947
+msgid "Position of perimeters starting points."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:951
+msgid "Nearest"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:957
+msgid "filling horizontal gaps on slopes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:958
+msgid "Extra perimeters (do nothing)"
+msgstr ""
+#, possible-c-format
+msgid "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r keeps adding perimeters, until more than 70% of the loop immediately above is supported.\nIf you succeed to trigger the algorihtm behind this setting, please send me a message. Personally, i think it's useless."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:969
+msgid "On overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:970
+msgid "Extra perimeters over overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:972
+msgid "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r keeps adding perimeter until all overhangs are filled.\n!! this is a very slow algorithm !!\nIf you use this setting, consider strongly using also overhangs_reverse."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:980
+msgid "On odd layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:981
+msgid "Extra perimeter on odd layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:983
+msgid "Add one perimeter every odd layer. With this, infill is taken into sandwitch and you may be able to reduce drastically the infill/perimeter overlap setting. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:989
+msgid "Only one perimeter on Top surfaces"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:991
+msgid "Use only one perimeter on flat top surface, to let more space to the top infill pattern."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:999
+msgid "The extruder to use (unless more specific extruder settings are specified). This value overrides perimeter and infill extruders, but not the support extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1015
+msgid "Extruder clearance height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1017
+msgid "Set this to the vertical distance between your nozzle tip and (usually) the X carriage rods. In other words, this is the height of the clearance cylinder around your extruder, and it represents the maximum depth the extruder can peek before colliding with other printed objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1029
+msgid "Extruder clearance radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1030
+msgid "Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1040
+msgid "Extruder Color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1146
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1049
+msgid "Extruder offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:4145
+msgid "If your firmware doesn't handle the extruder displacement you need the G-code to take it into account. This option lets you specify the displacement of each extruder with respect to the first one. It expects positive coordinates (they will be subtracted from the XY coordinate)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1060
+msgid "Extruder temp offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1062
+msgid "This offset will be added to all extruder temperature set by the filament settings.\nNote that you should set 'M104 S{first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]}'\ninstead of 'M104 S[first_layer_temperature]' in the start_gcode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1070
+msgid "Extruder fan offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1072
+msgid "This offset wil be add to all fan value set by the filament properties. It won't make them go higher than 100% and lower than 0%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1079
+msgid "Extrusion axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1081
+msgid "Use this option to set the axis letter associated to your printer's extruder (usually E but some printers use A)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1086 src/libslic3r/PrintConfig.cpp:1096
+msgid "Extrusion multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1088
+msgid "This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 0.9 and 1.1. If you think you need to change this more, check filament diameter and your firmware E steps."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1098
+msgid "This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 90% and 110%. If you think you need to change this more, check filament diameter and your firmware E steps. This print setting is multiplied against the extrusion_multiplier from the filament tab. Its only purpose is to offer the same functionality but with a per-object basis."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1110
+msgid "Default extrusion width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1112
+msgid "Set this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1123
+msgid "Keep fan always on"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1125
+msgid "If this is enabled, fan will continuously run at base speed if no setting override the speed. Useful for PLA, harmful for ABS."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1131
+msgid "Enable fan if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1133
+msgid "If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the default and maximum speeds.\nSet to 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1136 src/libslic3r/PrintConfig.cpp:3019
+msgid "approximate seconds"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1144
+msgid "Filament color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1152
+msgid "Filament notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1154
+msgid "You can put your notes regarding the filament here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1162
+msgid "Max speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1164
+msgid "Maximum speed allowed for this filament. Limits the maximum speed of a print to the minimum of the print speed and the filament speed. Set to zero for no limit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:2341
+msgid "Max volumetric speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1175
+msgid "Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1184
+msgid "Max speed on the wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1185
+msgid "This setting is used to set the maximum speed when extruding inside the wipe tower (use M220). In %, set 0 to disable and use the Filament type instead.\nIf disabled, these filament types will have a defaut value of:\n - PVA: 80% to 60%\n - SCAFF: 35%\n - FLEX: 35%\n - OTHERS: 100%\nNote that the wipe tower reset the speed at 100% for the unretract in any case.\nIf using marlin, M220 B/R is used to save the speed override before the wipe tower print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1201
+msgid "Loading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1202
+msgid "Speed used for loading the filament on the wipe tower. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1210
+msgid "Toolchange temperature enabled"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1211
+msgid "Determines whether toolchange temperatures will be applied"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1216
+msgid "Fast mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1217
+msgid "Experimental: drops nozzle temperature during cooling moves instead of prior to extraction to reduce wait time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1222
+msgid "Use part fan to cool hotend"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1223
+msgid "Experimental setting.  May enable the hotend to cool down faster during toolchanges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1228
+msgid "Toolchange part fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1229
+msgid "Experimental setting.  Fan speeds that are too high can clash with the hotend's PID routine."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1237
+msgid "Enable Skinnydip string reduction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1238
+msgid "Skinnydip performs a secondary dip into the meltzone to burn off fine strings of filament"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1243
+msgid "Pause in melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1244
+msgid "Stay in melt zone for this amount of time before extracting the filament.  Not usually necessary."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1245 src/libslic3r/PrintConfig.cpp:1253
+msgid "milliseconds"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1251
+msgid "Pause before extraction "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1252
+msgid "Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "Speed to move into melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1268
+msgid "usually not necessary to change this"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:1269
+msgid "mm/sec"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1267
+msgid "Speed to extract from melt zone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1275
+msgid "Toolchange temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1276
+msgid "To further reduce stringing, it can be helpful to set a lower temperature just prior to extracting filament from the hotend."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1284
+msgid "Insertion distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1285
+msgid "For stock extruders, usually 40-42mm.  For bondtech extruder upgrade, usually 30-32mm.  Start with a low value and gradually increase it until strings are gone.  If there are blobs on your wipe tower, your value is too high."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1293
+msgid "Loading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1294
+msgid "Speed used at the very beginning of loading phase. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1301
+msgid "Unloading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1302
+msgid "Speed used for unloading the filament on the wipe tower (does not affect  initial part of unloading just after ramming). "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1310
+msgid "Unloading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1311
+msgid "Speed used for unloading the tip of the filament immediately after ramming. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1318
+msgid "Delay after unloading"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1319
+msgid "Time to wait after the filament is unloaded. May help to get reliable toolchanges with flexible materials that may need more time to shrink to original dimensions. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1328
+msgid "Number of cooling moves"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1329
+msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1337
+msgid "Speed of the first cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1338
+msgid "Cooling moves are gradually accelerating beginning at this speed. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1345
+msgid "Minimal purge on wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1346
+msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Slic3r will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1350
+msgid "mm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1356
+msgid "Speed of the last cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1357
+msgid "Cooling moves are gradually accelerating towards this speed. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1364
+msgid "Filament load time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1365
+msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1372
+msgid "Ramming parameters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1373
+msgid "This string is edited by RammingDialog and contains ramming specific parameters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1379
+msgid "Filament unload time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1380
+msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1388
+msgid "Enter your filament diameter here. Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average."
+msgstr "Enter your filament diameter here. נדרש דיוק טוב, לכן השתמש בקאליפר ובצע מדידות מרובות לאורך החומר, ואז חשב את הממוצע."
+
+#: src/libslic3r/PrintConfig.cpp:1396
+msgid "Shrinkage"
+msgstr ""
+#, possible-c-format
+msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in xy to conpensate. Only the filament used for the perimeter is taken into account.\nBe sure to let enough space between objects, as this compensation is done after the checks."
+#: src/libslic3r/PrintConfig.cpp:4384
+msgstr ""
+msgid "Density"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1409
+msgid "Enter your filament density here. This is only for statistical information. A decent way is to weigh a known length of filament and compute the ratio of the length to volume. Better is to calculate the volume directly through displacement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1412
+msgid "g/cm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1418
+msgid "Filament type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1420
+msgid "The filament material type for use in custom G-codes."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1456
+msgid "Soluble material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid "Soluble material is most likely used for a soluble support."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1464
+msgid "Filament cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1466
+msgid "Enter your filament cost per kg here. This is only for statistical information."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid "money/kg"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1472
+msgid "Spool weight"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1474
+msgid "Enter weight of the empty filament spool. One may weigh a partially consumed filament spool before printing and one may compare the measured weight with the calculated weight of the filament with the spool to find out whether the amount of filament on the spool is sufficient to finish the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1478
+msgid "g"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:4467
+msgid "(Unknown)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1504
+msgid "Fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1492
+msgid "Fill angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1494
+msgid "Default base angle for infill orientation. Cross-hatching will be applied to this. Bridges will be infilled using the best direction Slic3r can detect, so this setting does not affect them."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1505
+msgid "Fill angle increment"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid "Add this angle each layer to the base angle for infill. May be useful for art, or to be sure to hit every object's feature even with very low infill. Still experiemental, tell me what makes it useful, or the problems that arise using it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1519
+msgid "Fill density"
+msgstr ""
+#, possible-c-format
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1555
+msgid "Fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1557
+msgid "Fill pattern for general low-density infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1578
+msgid "Grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1579
+msgid "Triangles"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1580
+msgid "Stars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid "Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1582
+msgid "Line"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:3486
+msgid "Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1585
+msgid "3D Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1586
+msgid "Gyroid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1590
+msgid "Scattered Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1591
+msgid "Adaptive Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1592
+msgid "Support Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1596
+msgid "Top fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1597
+msgid "Top fill flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1600
+msgid "You can increase this to over-extrude on the top layer if there are not enough plastic to make a good fill."
+#: src/libslic3r/PrintConfig.cpp:1678 src/libslic3r/PrintConfig.cpp:1735
+msgstr ""
+msgid "First layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1607
+msgid "First layer flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1610
+msgid "You can increase this to over-extrude on the first layer if there are not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1619
+msgid "XY First layer compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1621
+msgid "The first layer will be grown / shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1629
+msgid "Ironing width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1631
+msgid "This is the width of the ironing pass, in a % of the top infill extrusion width, should not be more than 50% (two times more lines, 50% overlap). It's not necessary to go below 25% (four times more lines, 75% overlap). \nIf you have problems with your ironing process, don't forget to look at the flow->above bridge flow, as this setting should be set to min 110% to let you have enough plastic in the top layer. A value too low will make your extruder eat the filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1642
+msgid "Distribution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1643
+msgid "Ironing flow distribution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1645
+msgid "This is the percentage of the flow that is used for the second ironing pass. Typical 10-20%. Should not be higher than 20%, unless you have your top extrusion width greatly superior to your nozzle width. A value too low and your extruder will eat the filament. A value too high and the first pass won't print well."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1656
+msgid "First layer acceleration"
+msgstr ""
+#, possible-c-format
+msgid "This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1668
+msgid "First layer bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1670
+msgid "Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1679
+msgid "First layer width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1681
+msgid "Set this to a non-zero value to set a manual extrusion width for first layer. You can use this to force fatter extrudates for better adhesion. If expressed as percentage (for example 140%) it will be computed over the nozzle diameter of the nozzle used for the type of extrusion. If set to zero, it will use the default extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1695
+msgid "When printing with very low layer heights, you might still want to print a thicker bottom layer to improve adhesion and tolerance for non perfect build plates. This can be expressed as an absolute value or as a percentage (for example: 75%) over the default nozzle width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1707
+msgid "Default first layer speed"
+msgstr ""
+#, possible-c-format
+msgid "If expressed as absolute value in mm/s, this speed will be applied to all the print moves but infill of the first layer, it can be overwrite by the 'default' (default depends of the type of the path) speed if it's lower than that. If expressed as a percentage it will scale the current speed.\nSet it at 100% to remove any first layer speed modification (with first_layer_infill_speed)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1722
+msgid "Infill first layer speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1724
+msgid "If expressed as absolute value in mm/s, this speed will be applied to infill moves of the first layer, it can be overwrite by the 'default' (solid infill or infill if not bottom) speed if it's lower than that. If expressed as a percentage (for example: 40%) it will scale the current infill speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1736
+msgid "First layer nozzle temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1738
+msgid "Extruder nozzle temperature for first layer. If you want to control temperature manually during print, set this to zero to disable temperature control commands in the output file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1747
+msgid "Enable Gap Fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1749
+msgid "Enable gap fill algorithm. It will extrude small lines between perimeters when there is not enough space for another perimeter or an infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1755
+msgid "Min surface"
+msgstr ""
+#, possible-c-format
+msgid "This setting represents the minimum mm² for a gapfill extrusion to be created.\nCan be a % of (perimeter width)²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1765 src/libslic3r/PrintConfig.cpp:1766
+msgid "Gap fill overlap"
+msgstr ""
+#, possible-c-format
+msgid "This setting allow you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps is left, and 0% means that the gap fill won't touch the perimeters.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1779
+msgid "Gap fill speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1781
+msgid "Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues. Set zero to disable gaps filling."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1789
+msgid "Verbose G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1791
+msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1798
+msgid "G-code flavor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1800
+msgid "Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1829
+msgid "No extrusion"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1834
+msgid "Label objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1836
+msgid "Enable this to add comments into the G-Code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1844
+msgid "High extruder current on filament swap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1846
+msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1854
+msgid "Infill acceleration"
+msgstr ""
+#, possible-c-format
+msgid "This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1865
+msgid "Combine infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1867
+msgid "This feature allows to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1870
+msgid "Combine infill every n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1876
+msgid "Length of the infill anchor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1878
+msgid "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width.\nIf set to 0, it will use a simpler algo that don't try to create a fake perimeter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1890
+msgid "0 (Simple connect)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1895
+msgid "1000 (unlimited)"
+msgstr ""
+#, possible-c-format
+msgid "Enables the creation of a support layer under the first solid layer. This allows you to use a lower infill ratio without compromising the top quality. The dense infill is laid out with a 50% infill density."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1910
+msgid "Do not connect infill lines to each other"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1912
+msgid "Give to the infill algorithm if the infill needs to be connected, and on which periemters Can be useful for art or with high infill/perimeter overlap. The result amy varies between infill typers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1920
+msgid "Connected"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1921
+msgid "Connected to hole perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1922
+msgid "Connected to outer perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1923
+msgid "Not connected"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:3860
+msgid "Algorithm"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1931
+msgid "Choose the way the dense layer is lay out. The automatic option let it try to draw the smallest surface with only strait lines inside the sparse infill. The anchored just enlarge a bit (by 'Default infill margin') the surfaces that need a better support."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1938
+msgid "Automatic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1939
+msgid "Automatic, only for small areas"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1940
+msgid "Anchored"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1945
+msgid "Infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1947
+msgid "The extruder to use when printing infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1955
+msgid "Set this to a non-zero value to set a manual extrusion width for infill. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1966
+msgid "Infill before perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1968
+msgid "This option will switch the print order of perimeters and infill, making the latter first."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1973
+msgid "Only infill where needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1975
+msgid "This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, slows down the G-code generation due to the multiple checks involved."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1982
+msgid "Infill/perimeters overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1984
+msgid "This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1993
+msgid "Sparse"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1996
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2004
+msgid "Inherits profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2005
+msgid "Name of the profile, from which this profile inherits."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2018
+msgid "Interface shells"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2019
+msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2027
+msgid "Enable ironing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2028
+msgid "Enable ironing of the top layers with the hot print head for smooth surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2034 src/libslic3r/PrintConfig.cpp:2036
+msgid "Ironing Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2048
+msgid "Flow rate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2050
+msgid "Percent of a flow rate relative to object's normal layer height. It's the percentage of the layer that will be over-extruded on top to do the ironing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2059
+msgid "Spacing between ironing lines"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2061
+msgid "Distance between ironing lines"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2077 src/libslic3r/PrintConfig.cpp:2090
+msgid "After layer change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2079
+msgid "This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2092
+msgid "This custom code is inserted at every extrusion type change.Note that you can use placeholder variables for all Slic3r settings as well as [extrusion_role], [layer_num] and [layer_z] that can take these string values: { Perimeter, ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the role of the extrusion is not unique, not exactly inside an other category or not known."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2104
+msgid "Exact last layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2106
+msgid "This setting controls the height of last object layers to put the last layer at the exact highest height possible. Experimental."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2111
+msgid "Supports remaining times"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2113
+msgid "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2121
+msgid "Supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2123
+msgid "The firmware supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2137
+msgid "Fan startup delay"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2130
+msgid "Move the fan start in the past by at least this delay (in seconds, you can use decimals). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves. Use 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2139
+msgid "Will only take into account the delay for the cooling of overhangs."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2144
+msgid "Fan KickStart time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2146
+msgid "Add a M106 S255 (max speed for fan) for this amount of seconds before gonig down to the desired speed to kick-start the cooling fan.\nSet to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2154
+msgid "How to apply limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2155
+msgid "Purpose of Machine Limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2157
+msgid "How to apply the Machine Limits.\n* In every case, they will be used as safeguard: Even if you use a print profile that set an acceleration of 5000, if your machine limits the acceleration is 4000, the outputted gcode will use the 4000 limit.\n* You can also use it as safeguard and to have a better printing time estimate.\n* You can also use it as safeguard, to have a better printing time estimate and emit the limits as the begining of the gcode file, with M201 M202 M203 M204 and M205 commands. If you want only to write a sub-set, choose the 'for time estimate' option and write yourself gcodes in the custom gcode section."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2168
+msgid "Also emit limits to G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid "Use also for time estimate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2170
+msgid "Use only as safeguards"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2171
+msgid "Disable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2194
+msgid "Maximum feedrate X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2195
+msgid "Maximum feedrate Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2196
+msgid "Maximum feedrate Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2197
+msgid "Maximum feedrate E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2200
+msgid "Maximum feedrate of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2201
+msgid "Maximum feedrate of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2202
+msgid "Maximum feedrate of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2203
+msgid "Maximum feedrate of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2211
+msgid "Maximum acceleration X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2212
+msgid "Maximum acceleration Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2213
+msgid "Maximum acceleration Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2214
+msgid "Maximum acceleration E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2217
+msgid "Maximum acceleration of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2218
+msgid "Maximum acceleration of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2219
+msgid "Maximum acceleration of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2220
+msgid "Maximum acceleration of the E axis"
+#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290
+msgstr ""
+msgid "mm/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2228
+msgid "Maximum jerk X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2229
+msgid "Maximum jerk Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2230
+msgid "Maximum jerk Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2231
+msgid "Maximum jerk E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2234
+msgid "Maximum jerk of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2235
+msgid "Maximum jerk of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2236
+msgid "Maximum jerk of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2237
+msgid "Maximum jerk of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Minimum feedrate when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2249
+msgid "Minimum feedrate when extruding (M205 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2257
+msgid "Minimum travel feedrate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2259
+msgid "Minimum travel feedrate (M205 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2267
+msgid "Maximum acceleration when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2269
+msgid "Maximum acceleration when extruding (M204 P)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2277
+msgid "Maximum acceleration when retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2279
+msgid "Maximum acceleration when retracting (M204 R)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2287
+msgid "Maximum acceleration when travelling"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2289
+msgid "Maximum acceleration when travelling (M204 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2307
+msgid "Max"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2299
+msgid "This setting represents the maximum speed of your fan, used when the layer print time is Very short."
+msgstr ""
+#, possible-c-format
+msgid "This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2320
+msgid "Max print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2322
+msgid "When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2331
+msgid "Max speed reduction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2333
+msgid "Set to 90% if you don't want the speed to be reduced by more than 90%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2343
+msgid "This experimental setting is used to set the maximum volumetric speed your extruder supports."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2352
+msgid "Max volumetric slope positive"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2353 src/libslic3r/PrintConfig.cpp:2365
+msgid "This experimental setting is used to limit the speed of change in extrusion rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2357 src/libslic3r/PrintConfig.cpp:2369
+msgid "mm³/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2364
+msgid "Max volumetric slope negative"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2377
+msgid "Default fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2380
+msgid "This setting represents the base fan speed this filament needs, or at least the minimum PWM your fan needs to work."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2388
+msgid "Min"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2391
+msgid "This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2399
+msgid "Minimum extrusion length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2401
+msgid "Too many too small commands may overload the firmware / connection. Put a higher value here if you see strange slowdown.\n0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2409
+msgid "Minimum top width for infill"
+msgstr ""
+#, possible-c-format
+msgid "If a top surface has to be printed and it's partially covered by an other layer, it won't be considered at a top layer where his width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2421
+msgid "Min print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2423
+msgid "Slic3r will never scale the speed below this one."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2430
+msgid "Minimal filament extrusion length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2432
+msgid "Generate no less than the number of skirt loops required to consume the specified amount of filament on the bottom layer. For multi-extruder machines, this minimum applies to each extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2441
+msgid "Configuration notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2443
+msgid "You can put here your personal notes. This text will be added to the G-code header comments."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2454
+msgid "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2460
+msgid "Host Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2462
+msgid "Slic3r can upload G-code files to a printer host. This field must contain the kind of the host."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2502
+msgid "Only retract when crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2504
+msgid "Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will be probably invisible)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:3803
+msgid "Enable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2512
+msgid "This option will drop the temperature of the inactive extruders to prevent oozing. It will enable a tall skirt automatically and move extruders outside such skirt when changing temperatures."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2519
+msgid "Output filename format"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2521
+msgid "You can use all configuration options as variables inside this template. For example: [layer_height], [fill_density] etc. You can also use [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2530
+msgid "Overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2531
+msgid "Overhangs speed"
+msgstr ""
+#, possible-c-format
+msgid "Speed for printing overhangs.\nCan be a % of the bridge speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2541
+msgid "'As bridge' speed threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2542
+msgid "Overhang bridge speed threshold"
+msgstr ""
+#, possible-c-format
+msgid "Minimum unsupported width for an extrusion to apply the bridge speed & fan to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2553
+msgid "'As bridge' flow threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2554
+msgid "Overhang bridge flow threshold"
+msgstr ""
+#, possible-c-format
+msgid "Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2565
+msgid "Reverse on odd"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2566
+msgid "Overhang reversal"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2568
+msgid "Extrude perimeters that have a part over an overhang in the reverse direction in odd layers. That alternating pattern can drastically improve steep overhang.\n!! this is a very slow algorithm (it uses the same results as extra_perimeters_overhangs) !!"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2574
+msgid "Reverse threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2575
+msgid "Overhang reversal threshold"
+msgstr ""
+#, possible-c-format
+msgid "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2584
+msgid "No perimeters on bridge areas"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2586
+msgid "Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. \n * Remove perimeters: remove the unsupported perimeters, let the bridge area as-is.\n * Keep only bridges: remove the perimeters in the bridge areas, keep only bridges that end in solid area.\n * Keep bridges and overhangs: remove the unsupported perimeters, keep only bridges that end in solid area, fill the rest with overhang perimeters+bridges.\n * Fill the voids with bridges: remove the unsupported perimeters, draw bridges over the whole hole.* !! this one can escalate to problems with overhangs shape like  /\\, so you should use it only on one layer at a time via the height-range modifier!\n!!Computationally intensive!!. "
+msgstr "Experimental option to remove perimeters where there is nothing under it and where a bridged infill should be better. \n"
+" * Remove perimeters: remove the unsupported perimeters, let the bridge area as-is.\n"
+" * Keep only bridges: remove the perimeters in the bridge areas, keep only bridges that end in solid area.\n"
+" * Keep bridges and overhangs: remove the unsupported perimeters, keep only bridges that end in solid area, fill the rest with overhang perimeters+bridges.\n"
+" * Fill the voids with bridges: remove the unsupported perimeters, draw bridges over the whole hole.* !! this one can escalate to problems with overhangs shape like  /\\, so you should use it only on one layer at a time via the height-range modifier!\n"
+"!!Computationally intensive!!. "
+
+#: src/libslic3r/PrintConfig.cpp:2599
+msgid "Disabled"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2600
+msgid "Remove perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2601
+msgid "Keep only bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2602
+msgid "Keep bridges and overhangs"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2603
+msgid "Fill the voids with bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2608
+msgid "Filament parking position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2609
+msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2617
+msgid "Extra loading distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2618
+msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further,  if negative, the loading move is shorter than unloading. "
+#: src/libslic3r/PrintConfig.cpp:2672
+msgstr ""
+msgid "Perimeters"
+msgstr ""
+#, possible-c-format
+msgid "This is the acceleration your printer will use for perimeters. A high value like 9000 usually gives good results if your hardware is up to the job.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2638
+msgid "Perimeter extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2640
+msgid "The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2650
+msgid "Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 105%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2664
+msgid "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2675
+msgid "This option sets the number of perimeters to generate for each layer. Note that Slic3r may increase this number automatically when it detects sloping surfaces which benefit from a higher number of perimeters if the Extra Perimeters option is enabled."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2679
+msgid "(minimum)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2686
+msgid "Post-processing scripts"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2688
+msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Slic3r config settings by reading environment variables."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2700
+msgid "Printer type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2701
+msgid "Type of the printer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2706
+msgid "Printer notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2708
+msgid "You can put your notes regarding the printer here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2716
+msgid "Printer vendor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2717
+msgid "Name of the printer vendor."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2722
+msgid "Printer variant"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2723
+msgid "Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2736
+msgid "Solid first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2738
+msgid "Use a solid layer instead of a raft for the layer that touch the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2743
+msgid "Raft layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2745
+msgid "The object will be raised by this number of layers, and support material will be generated under it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2753
+msgid "Resolution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2755
+msgid "Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more detail than printers can render. Set to zero to disable any simplification and use full resolution from input. \nNote: slic3r simplify the geometry with a treshold of 0.0125mm and has an internal resolution of 0.0001mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2766
+msgid "Minimum travel after retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2768
+msgid "Retraction is not triggered when travel moves are shorter than this length."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2775
+msgid "Retract amount before wipe"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2777
+msgid "With bowden extruders, it may be wise to do some amount of quick retract before doing the wipe movement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2784
+msgid "Retract on layer change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2786
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2791 src/libslic3r/PrintConfig.cpp:2808
+msgid "Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2792
+msgid "Retraction Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2794
+msgid "When retraction is triggered, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2813
+msgid "mm (zero to disable)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2801
+msgid "Retraction length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2803
+msgid "Override the retract_length settign from the printer config. Used for calibration. Set negative to disable"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2809
+msgid "Retraction Length (Toolchange)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2810
+msgid "When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2819
+msgid "Lift Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2821
+msgid "If you set this to a positive value, Z is quickly raised every time a retraction is triggered. When using multiple extruders, only the setting for the first extruder will be considered."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2828
+msgid "Above Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2829
+msgid "Only lift Z above"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2831
+msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z. You can tune this setting for skipping lift on the first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2838
+msgid "Below Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2839
+msgid "Only lift Z below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2841
+msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z. You can tune this setting for limiting lift to the first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2849
+msgid "Enforce on first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2850
+msgid "Enforce lift on first layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2852
+msgid "Select this option to enforce z-lift on the first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2857
+msgid "On surfaces"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2858
+msgid "Lift only on"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2860
+msgid "Select this option to not use/enforce the z-lift on a top surface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2871 src/libslic3r/PrintConfig.cpp:2879
+msgid "Extra length on restart"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2872
+msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2880
+msgid "Extrat length on toolchange restart"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2881
+msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2888 src/libslic3r/PrintConfig.cpp:2889
+msgid "Retraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2891
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2897 src/libslic3r/PrintConfig.cpp:2898
+msgid "Deretraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2900
+msgid "The speed for loading of a filament into extruder after retraction (it only applies to the extruder motor). If left to zero, the retraction speed is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2909
+msgid "Position of perimeters starting points.\n "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2916
+msgid "Cost-based"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2917
+msgid "Random"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2918
+msgid "Aligned"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2924
+msgid "Angle cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2925
+msgid "Seam angle cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2927
+msgid "Cost of placing the seam at a bad angle. The worst angle (max penalty) is when it's flat."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2934
+msgid "Travel cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2935
+msgid "Seam travel cost"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2937
+msgid "Cost of moving the extruder. The highest penalty is when the point is the farest from the position of the extruder before extruding the external periemter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2946
+msgid "Direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2948
+msgid "Preferred direction of the seam"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2949
+msgid "Seam preferred direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2957
+msgid "Jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2959
+msgid "Seam preferred direction jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2960
+msgid "Preferred direction of the seam - jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2968
+msgid "Distance from object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2970
+msgid "Distance between skirt and object(s). Set this to zero to attach the skirt to the object(s) and get a brim for better adhesion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2978
+msgid "Skirt height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2980
+msgid "Height of skirt expressed in layers. Set this to a tall value to use skirt as a shield against drafts."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2989
+msgid "Horizontal width of the skirt that will be printed around each object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2996
+msgid "Draft shield"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2997
+msgid "If enabled, the skirt will be as tall as a highest printed object. This is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3003
+msgid "Loops (minimum)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3004
+msgid "Skirt Loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3006
+msgid "Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set this to zero to disable skirt completely."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3014
+msgid "Slow down if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3016
+msgid "If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value, if possible.\nSet to 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3029
+msgid "This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3039
+msgid "Min length"
+msgstr ""
+#, possible-c-format
+msgid "This set the threshold for small periemter length. Every loop with a length lower than that will be printed at small perimeter speed\nCan be a mm or a % of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3052
+msgid "Max length"
+msgstr ""
+#, possible-c-format
+msgid "This set the end of the threshold for small periemter length. Every periemter loop lower than that will see their speed reduced a bit, from their normal spee at this length down to small perimeter speed.\nCan be a mm or a % of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3065
+msgid "Min convex angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3066
+msgid "Curve smoothing minimum angle (convex)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3068
+msgid "Minimum (convex) angle at a vertex to enable smoothing (trying to create a curve around the vertex). 180 : nothing will be smooth, 0 : all angles will be smoothen."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3080
+msgid "Min concave angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3081
+msgid "Curve smoothing minimum angle (concave)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3083
+msgid "Minimum (concave) angle at a vertex to enable smoothing (trying to create a curve around the vertex). 180 : nothing will be smooth, 0 : all angles will be smoothen."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid "Precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3095
+msgid "Curve smoothing precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3097
+msgid "These parameter allow the slicer to smooth the angles in each layer. The precision will be at least the new precision of the curve. Set to 0 to deactivate.\nNote: as it use the polygon's edges and only work in the 2D planes, you must have a very clean or hand-made 3D model.\nIt's really only useful to smoothen functional models or very wide angles."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3109
+msgid "cutoff"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3110
+msgid "Curve smoothing cutoff dist"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Maximum distance between two points to allow adding new ones. Allow to avoid distording long strait areas. 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3120
+msgid "Solid infill threshold area"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3122
+msgid "Force solid infill for regions having a smaller area than the specified threshold."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3123 src/libslic3r/PrintConfig.cpp:3989
+msgid "mm²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3129
+msgid "Solid infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3131
+msgid "The extruder to use when printing solid infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3137
+msgid "Solid infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3139
+msgid "This feature allows to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3152
+msgid "Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3162
+msgid "Solid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3165
+msgid "Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3176
+msgid "Solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3178
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3185
+msgid "Minimum thickness of a top / bottom shell"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3191
+msgid "Spiral vase"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3193
+msgid "This feature will raise Z gradually while printing a single-walled object in order to remove any visible seam. This option requires a single perimeter, no infill, no top solid layers and no support material. You can still set any number of bottom solid layers as well as skirt/brim loops. It won't work when printing more than an object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3201
+msgid "Temperature variation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3202
+msgid "Temperature difference to be applied when an extruder is not active. Enables a full-height \"sacrificial\" skirt on which the nozzles are periodically wiped."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3211 src/libslic3r/PrintConfig.cpp:3228
+msgid "Start G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3213
+msgid "This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want.\n placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy]"
+msgstr "This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want.\n"
+" placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy]"
+
+#: src/libslic3r/PrintConfig.cpp:3231
+msgid "This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3248
+msgid "Model rounding precision"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3250
+msgid "This is the rounding error of the input object. It's used to align points that should be in the same line. Put 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3259
+msgid "Color change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3260
+msgid "This G-code will be used as a code for the color change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3268
+msgid "Pause Print G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3269
+msgid "This G-code will be used as a code for the pause print"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3277
+msgid "Custom G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3278
+msgid "This G-code will be used as a custom code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3286
+msgid "Single Extruder Multi Material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3287
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3292
+msgid "Prime all printing extruders"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3293
+msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3298
+msgid "No sparse layers (EXPERIMENTAL)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3299
+msgid "If enabled, the wipe tower will not be printed on layers with no toolchanges. On layers with a toolchange, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3306
+msgid "Generate support material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3308
+msgid "Enable support material generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3312
+msgid "Auto generated supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3314
+msgid "If checked, supports will be generated automatically based on the overhang threshold value. If unchecked, supports will be generated inside the \"Support Enforcer\" volumes only."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3320
+msgid "XY separation between an object and its support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3322
+msgid "XY separation between an object and its support. If expressed as percentage (for example 50%), it will be calculated over external perimeter width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3332
+msgid "Pattern angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3335
+msgid "Use this setting to rotate the support material pattern on the horizontal plane."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3345 src/libslic3r/PrintConfig.cpp:4577
+msgid "Only create support if it lies on a build plate. Don't create support on a print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3350
+msgid "Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3353
+msgid "How to compute the vertical z-distance.\nFrom filament: it use the nearest bit of the filament. When a bridge is extruded, it goes below the current plane.\nFrom plane: it use the plane-z. Same than 'from filament' if no 'bridge' is extruded.\nNone: No z-offset. Useful for Soluble supports.\n"
+msgstr ""
+#, possible-c-format
+msgid "The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the extruding width used for the interface layers."
+msgstr ""
+#, possible-c-format
+msgid "The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the extruding width used for the interface layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3395
+msgid "Enforce support for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3397
+msgid "Generate support material for the specified number of layers counting from bottom, regardless of whether normal support material is enabled or not and regardless of any angle threshold. This is useful for getting more adhesion of objects having a very thin or poor footprint on the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3402
+msgid "Enforce support for the first n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3408
+msgid "Support material/raft/skirt extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3410
+msgid "The extruder to use when printing support material, raft and skirt (1+, 0 to use the current extruder to minimize tool changes)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3418
+msgid "Support material width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3420
+msgid "Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3430
+msgid "Interface loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3432
+msgid "Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3437
+msgid "Support material/raft interface extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3439
+msgid "The extruder to use when printing support material interface (1+, 0 to use the current extruder to minimize tool changes). This affects raft too."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3446
+msgid "Interface layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3448
+msgid "Number of interface layers to insert between the object(s) and support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3455
+msgid "Interface pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3457
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3464
+msgid "Interface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3465
+msgid "Support interface speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3467
+msgid "Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3477
+msgid "Support pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3479
+msgid "Pattern used to generate support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3485
+msgid "Rectilinear grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3492
+msgid "Support interface pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3494
+msgid "Pattern for interface layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3514
+msgid "Pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3516
+msgid "Spacing between support material lines."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3524
+msgid "Support speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3526
+msgid "Speed for printing support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3533
+msgid "Synchronize with object layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3535
+msgid "Synchronize support layers with the object print layers. This is useful with multi-material printers, where the extruder switch is expensive."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3541
+msgid "Overhang threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3543
+msgid "Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set to zero for automatic detection (recommended)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3555
+msgid "With sheath around the support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3557
+msgid "Add a sheath (a single perimeter line) around the base support. This makes the support more reliable, but also more difficult to remove."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3566
+msgid "Extruder nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3569
+msgid "Nozzle temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3577
+msgid "Override the temperature of the extruder. Avoid doing too many changes, it won't stop for cooling/heating. 0 to disable. May only works on Height range modifiers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3582
+msgid "Z-lift override"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3584
+msgid "Set the new lift-z value for this override. 0 will disable the z-lift. -& to disable. May only works on Height range modifiers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3590 src/libslic3r/PrintConfig.cpp:3591
+msgid "Overlapping external perimeter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3593
+msgid "Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that their flow isn't adjusted and so it will result in over-extruding and undefined behavior."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3598 src/libslic3r/PrintConfig.cpp:3599
+msgid "Overlapping all perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3601
+msgid "Allow all perimeters to overlap, instead of just external ones."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3647
+msgid "Thin walls"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3609
+msgid "Detect single-width walls (parts where two extrusions don't fit and we need to collapse them into a single trace). If unchecked, slic3r may try to fit perimeters where it's not possible, creating some overlap leading to over-extrusion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3616
+msgid "Min width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3617
+msgid "Thin walls min width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3619
+msgid "Minimum width for the extrusion to be extruded (widths lower than the nozzle diameter will be over-extruded at the nozzle diameter). If expressed as percentage (for example 110%) it will be computed over nozzle diameter. The default behavior of slic3r and slic3rPE is with a 33% value. Put 100% to avoid any sort of over-extrusion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3628
+msgid "Overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3629
+msgid "Thin wall overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3631
+msgid "Overlap between the thin wall and the perimeters. Can be a % of the external perimeter width (default 50%)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3638
+msgid "Merging with perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3639
+msgid "Thin wall merge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3641
+msgid "Allow the external perimeter to merge the thin walls in the path. You can deactivate it if you use thin walls as a custom support, to reduce adhesion a little bit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3648
+msgid "Thin walls speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3650
+msgid "Speed for thin wall (external extrusion that are alone because the obect is too thin at these places)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3657
+msgid "Threads"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3658
+msgid "Threads are used to parallelize long-running tasks. Optimal threads number is slightly above the number of available cores/processors."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3669
+msgid "Time estimation compensation"
+msgstr ""
+#, possible-c-format
+msgid "This setting allow you to modify the time estiamtion by a % amount. As slic3r only use the marlin algorithm, it's not precise enough if an other firmware is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3678
+msgid "Tool change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3680
+msgid "This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as [previous_extruder] and [next_extruder], so e.g. the standard toolchange command can be scripted as T[next_extruder]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3691
+msgid "Tool name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3693
+msgid "Only used for klipper, where you can name the extruder. If not set, will be 'extruderX' with 'X' replaced by the extruder number."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3700
+msgid "Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3711
+msgid "Top solid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3712
+msgid "Top solid speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3714
+msgid "Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3728
+msgid "Top layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3730
+msgid "Number of solid layers to generate on top surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3731
+msgid "Top solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3739
+msgid "The number of top solid layers is increased above top_solid_layers if necessary to satisfy minimum thickness of top shell. This is useful to prevent pillowing effect when printing with variable layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3742
+msgid "Minimum top shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3749
+msgid "Travel speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3751
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3759
+msgid "Use firmware retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3761
+msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3767
+msgid "Use relative E distances"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3769
+msgid "If your firmware requires relative E values, check this, otherwise leave it unchecked. Most firmwares use absolute values."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3775
+msgid "Use volumetric E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3777
+msgid "This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3787
+msgid "Enable variable layer height feature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3789
+msgid "Some printers or printer setups may have difficulties printing with a variable layer height. Enabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3795
+msgid "Wipe while retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3797
+msgid "This flag will move the nozzle while retracting to minimize the possible blob on leaky extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3804
+msgid "Enable wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3806
+msgid "Multi material printers may need to prime or purge extruders on tool changes. Extrude the excess material into the wipe tower."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3812
+msgid "Purging volumes - load/unload volumes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3813
+msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3819
+msgid "Purging volumes - matrix"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3820
+msgid "This matrix describes volumes (in cubic milimetres) required to purge the new filament on the wipe tower for any given pair of tools. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3830
+msgid "Enable advanced wiping volume"
+msgstr ""
+#, possible-c-format
+msgid "Allow slic3r to compute the purge volume via smart computations. Use the pigment% of each filament and following parameters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3836
+msgid "Nozzle volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3837
+msgid "The volume of melted plastic inside your nozlle. Used by 'advanced wiping'."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3838 src/libslic3r/PrintConfig.cpp:3854
+msgid "mm3"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3843
+msgid "Pigment percentage"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3844
+msgid "The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/natural, 0.2-0.5 for white and 1 for black."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3851
+msgid "Multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3852
+msgid "Auto-wipe multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3853
+msgid "The volume multiplier used to compute the final volume to extrude by the algorithm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3861
+msgid "Auto-wipe algorithm"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3862
+msgid "Algo for the advanced wipe.\nLinear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\nQuadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ volume_mult * (pigmentBefore-pigmentAfter)^3\nHyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / (0.5+pigmentAfter)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3870
+msgid "Linear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3871
+msgid "Quadratric"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3872
+msgid "Hyperbola"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3877
+msgid "Wipe tower brim width"
+msgstr ""
+#, possible-c-format
+msgid "Width of the brim for the wipe tower. Can be in mm of in % of the (assumed) only one nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3884
+msgid "X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3885
+msgid "Wipe tower X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3886
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3892
+msgid "Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3893
+msgid "Wipe tower Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3894
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3901
+msgid "Wipe tower Width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3902
+msgid "Width of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3908
+msgid "Wipe tower rotation angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3909
+msgid "Wipe tower rotation angle with respect to x-axis."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3916
+msgid "Wipe into this object's infill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3917
+msgid "Purging after toolchange will done inside this object's infills. This lowers the amount of waste but may result in longer print time  due to additional travel moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3924
+msgid "Wipe into this object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3925
+msgid "Object will be used to purge the nozzle after a toolchange to save material that would otherwise end up in the wipe tower and decrease print time. Colours of the objects will be mixed as a result."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3932
+msgid "Extra Wipe for external perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3933
+msgid "When the external perimeter loop extrusion end, a wipe is done, going a bit inside the print. The number put in this setting increase the wipe by moving the nozzle again along the loop before the final wipe."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3941
+msgid "Maximal bridging distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3942
+msgid "Maximal distance between supports on sparse infill sections. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3948
+msgid "Outer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3949
+msgid "Outer XY size compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3951
+msgid "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'exterior' shell of the object.\n !!! it's recommended you put the same value into the 'Inner XY size compensation', unless you are sure you don't have horizontal holes. !!! "
+msgstr "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\n"
+"This one only applies to the 'exterior' shell of the object.\n"
+" !!! it's recommended you put the same value into the 'Inner XY size compensation', unless you are sure you don't have horizontal holes. !!! "
+
+#: src/libslic3r/PrintConfig.cpp:3960
+msgid "Inner"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3961
+msgid "Inner XY size compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3963
+msgid "The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'inner' shell of the object (!!! horizontal holes break the shell !!!)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3971 src/libslic3r/PrintConfig.cpp:3983
+msgid "Holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3972
+msgid "XY holes compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3974
+msgid "The convex holes will be grown / shrunk in the XY plane by the configured value (negative = inwards, positive = outwards, should be negative as the holes are always a bit smaller irl). This might be useful for fine-tuning hole sizes.\nThis setting behave the same as 'Inner XY size compensation' but only for convex shapes. It's added to 'Inner XY size compensation', it does not replace it. "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3984
+msgid "XY holes threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3986
+msgid "Maximum area for the hole where the hole_size_compensation will apply fully. After that, it will decraese down to 0 for four time this area. Set to 0 to let the hole_size_compensation apply fully for all detected holes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:3995
+msgid "Convert round holes to polyholes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3997
+msgid "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\nSee http://hydraraptor.blogspot.com/2011/02/polyholes.html"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4004
+msgid "Z offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4006
+msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4015
+msgid "Z full step"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4016
+msgid "Set this to the height moved when your Z motor (or equivalent) turns one step.If your motor needs 200 steps to move your head/plater by 1mm, this field have to be 1/200 = 0.005.\nNote that the gcode will write the z values with 6 digits after the dot if z_step is set (it's 3 digits if it's disabled).\nPut 0 to disable."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4119
+msgid "Milling cutter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4121
+msgid "The milling cutter to use (unless more specific extruder settings are specified). "
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4135
+msgid "Milling diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4137
+msgid "This is the diameter of your cutting tool."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4143
+msgid "Tool offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4154
+msgid "Tool z offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4156
+msgid "."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4162
+msgid "Tool z lift"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4164
+msgid "Amount of lift for travel."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4170
+msgid "G-Code to switch to this toolhead"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4172
+msgid "Put here the gcode to change the toolhead (called after the g-code T[next_extruder]). You have access to [next_extruder] and [previous_extruder]. next_extruder is the 'extruder number' of the new milling tool, it's equal to the index (begining at 0) of the milling tool plus the number of extruders. previous_extruder is the 'extruder number' of the previous tool, it may be a normal extruder, if it's below the number of extruders. The number of extruder is available at [extruder] and the number of milling tool is available at [milling_cutter]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4180
+msgid "G-Code to switch from this toolhead"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4182
+msgid "Put here the gcode to end the toolhead action, like stopping the spindle. You have access to [next_extruder] and [previous_extruder]. previous_extruder is the 'extruder number' of the current milling tool, it's equal to the index (begining at 0) of the milling tool plus the number of extruders. next_extruder is the 'extruder number' of the next tool, it may be a normal extruder, if it's below the number of extruders. The number of extruder is available at [extruder]and the number of milling tool is available at [milling_cutter]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4190
+msgid "Milling post-processing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4192
+msgid "If activated, at the end of each layer, the printer will switch to a milling head and mill the external perimeters.\nYou should set the 'Milling extra XY size' to a value high enough to have enough plastic to mill. Also, be sure that your piece is firmly glued to the bed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4198
+msgid "Milling extra XY size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4200
+msgid "This increase the size of the object by a certain amount to have enough plastic to mill. You can set a number of mm or a percentage of the calculated optimal extra width (from flow calculation)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4208
+msgid "Milling only after"
+msgstr ""
+#, possible-c-format
+msgid "This setting restrict the post-process milling to a certain height, to avoid milling the bed. It can be a mm of a % of the first layer height (so it can depends of the object)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4217
+msgid "Milling Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4219
+msgid "Speed for milling tool."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4233
+msgid "Display width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4234
+msgid "Width of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4239
+msgid "Display height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4240
+msgid "Height of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4245
+msgid "Number of pixels in"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4247
+msgid "Number of pixels in X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4253
+msgid "Number of pixels in Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4258
+msgid "Display horizontal mirroring"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4259
+msgid "Mirror horizontally"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4260
+msgid "Enable horizontal mirroring of output images"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4265
+msgid "Display vertical mirroring"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4266
+msgid "Mirror vertically"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4267
+msgid "Enable vertical mirroring of output images"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4272
+msgid "Display orientation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4273
+msgid "Set the actual LCD display orientation inside the SLA printer. Portrait mode will flip the meaning of display width and height parameters and the output images will be rotated by 90 degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4279
+msgid "Landscape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4280
+msgid "Portrait"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4285
+msgid "Fast"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4286
+msgid "Fast tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4287
+msgid "Time of the fast tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4294
+msgid "Slow"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4295
+msgid "Slow tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4296
+msgid "Time of the slow tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4303
+msgid "Area fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4304
+msgid "The percentage of the bed area. \nIf the print area exceeds the specified value, \nthen a slow tilt will be used, otherwise - a fast tilt"
+#: src/libslic3r/PrintConfig.cpp:4313
+msgstr ""
+msgid "Printer scaling correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4319 src/libslic3r/PrintConfig.cpp:4320
+msgid "Printer absolute correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4321
+msgid "Will inflate or deflate the sliced 2D polygons according to the sign of the correction."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4327
+msgid "Elephant foot minimum width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4329
+msgid "Minimum width of features to maintain when doing elephant foot compensation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4336 src/libslic3r/PrintConfig.cpp:4337
+msgid "Printer gamma correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4338
+msgid "This will apply a gamma correction to the rasterized 2D polygons. A gamma value of zero means thresholding with the threshold in the middle. This behaviour eliminates antialiasing without losing holes in polygons."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4350 src/libslic3r/PrintConfig.cpp:4351
+msgid "SLA material type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4362 src/libslic3r/PrintConfig.cpp:4363
+msgid "Initial layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4369 src/libslic3r/PrintConfig.cpp:4370
+msgid "Bottle volume"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4371
+msgid "ml"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4376 src/libslic3r/PrintConfig.cpp:4377
+msgid "Bottle weight"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4378
+msgid "kg"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4385
+msgid "g/ml"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4392
+msgid "money/bottle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4397
+msgid "Faded layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4398
+msgid "Number of the layers needed for the exposure time fade from initial exposure time to the exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4405 src/libslic3r/PrintConfig.cpp:4406
+msgid "Minimum exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4413 src/libslic3r/PrintConfig.cpp:4414
+msgid "Maximum exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4421 src/libslic3r/PrintConfig.cpp:4422
+msgid "Exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4428 src/libslic3r/PrintConfig.cpp:4429
+msgid "Minimum initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4436 src/libslic3r/PrintConfig.cpp:4437
+msgid "Maximum initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4444 src/libslic3r/PrintConfig.cpp:4445
+msgid "Initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4451 src/libslic3r/PrintConfig.cpp:4452
+msgid "Correction for expansion"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4458
+msgid "SLA print material notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4459
+msgid "You can put your notes regarding the SLA print material here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4471 src/libslic3r/PrintConfig.cpp:4482
+msgid "Default SLA material profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4493
+msgid "Generate supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4495
+msgid "Generate supports for the models"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4500
+msgid "Pinhead front diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4502
+msgid "Diameter of the pointing side of the head"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4509
+msgid "Head penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4511
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4518
+msgid "Pinhead width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4520
+msgid "Width from the back sphere center to the front sphere center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4528
+msgid "Pillar diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4530
+msgid "Diameter in mm of the support pillars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4538
+msgid "Small pillar diameter percent"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4540
+msgid "The percentage of smaller pillars compared to the normal pillar diameter which are used in problematic areas where a normal pilla cannot fit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4549
+msgid "Max bridges on a pillar"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4551
+msgid "Maximum number of bridges that can be placed on a pillar. Bridges hold support point pinheads and connect to pillars as small branches."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4559
+msgid "Pillar connection mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4560
+msgid "Controls the bridge type between two neighboring pillars. Can be zig-zag, cross (double zig-zag) or dynamic which will automatically switch between the first two depending on the distance of the two pillars."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4568
+msgid "Zig-Zag"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4569
+msgid "Cross"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4570
+msgid "Dynamic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4582
+msgid "Pillar widening factor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4584
+msgid "Merging bridges or pillars into another pillars can increase the radius. Zero means no increase, one means full increase."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4593
+msgid "Support base diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4595
+msgid "Diameter in mm of the pillar base"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4603
+msgid "Support base height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4605
+msgid "The height of the pillar base cone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4612
+msgid "Support base safety distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4615
+msgid "The minimum distance of the pillar base from the model in mm. Makes sense in zero elevation mode where a gap according to this parameter is inserted between the model and the pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4625
+msgid "Critical angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4627
+msgid "The default angle for connecting support sticks and junctions."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4635
+msgid "Max bridge length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4637
+msgid "The max length of a bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4644
+msgid "Max pillar linking distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4646
+msgid "The max distance of two pillars to get linked with each other. A zero value will prohibit pillar cascading."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4656
+msgid "How much the supports should lift up the supported object. If this value is zero, the bottom of the model geometry will be considered as part of the pad.If \"Pad around object\" is enabled, this value is ignored."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4669
+msgid "This is a relative measure of support points density."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4675
+msgid "Minimal distance of the support points"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4677
+msgid "No support points will be placed closer than this threshold."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4683
+msgid "Use pad"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4685
+msgid "Add a pad underneath the supported model"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4690
+msgid "Pad wall thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4692
+msgid "The thickness of the pad and its optional cavity walls."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4700
+msgid "Pad wall height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4701
+msgid "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4714
+msgid "Pad brim size"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4715
+msgid "How far should the pad extend around the contained geometry"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4725
+msgid "Max merge distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4727
+msgid "Some objects can get along with a few smaller pads instead of a single big one. This parameter defines how far the center of two smaller pads should be. If theyare closer, they will get merged into one pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4747
+msgid "Pad wall slope"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4749
+msgid "The slope of the pad wall relative to the bed plane. 90 degrees means straight walls."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4760
+msgid "Create pad around object and ignore the support elevation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4765
+msgid "Pad around object everywhere"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4767
+msgid "Force pad around object everywhere"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4772
+msgid "Pad object gap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4774
+msgid "The gap between the object bottom and the generated pad in zero elevation mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4783
+msgid "Pad object connector stride"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4785
+msgid "Distance between two connector sticks which connect the object and the generated pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4792
+msgid "Pad object connector width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4794
+msgid "Width of the connector sticks which connect the object and the generated pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4801
+msgid "Pad object connector penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4804
+msgid "How much should the tiny connectors penetrate into the model body."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4811
+msgid "Enable hollowing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4813
+msgid "Hollow out a model to have an empty interior"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4818
+msgid "Wall thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4820
+msgid "Minimum wall thickness of a hollowed model."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4828
+msgid "Accuracy"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4830
+msgid "Performance vs accuracy of calculation. Lower values may produce unwanted artifacts."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:4840
+msgid "Hollowing is done in two steps: first, an imaginary interior is calculated deeper (offset plus the closing distance) in the object and then it's inflated back to the specified offset. A greater closing distance makes the interior more rounded. At zero, the interior will resemble the exterior the most."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5626
+msgid "Export OBJ"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5627
+msgid "Export the model(s) as OBJ."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5639
+msgid "Export SLA"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5640
+msgid "Slice the model and export SLA printing layers as PNG."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5645
+msgid "Export 3MF"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5646
+msgid "Export the model(s) as 3MF."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5650
+msgid "Export AMF"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5651
+msgid "Export the model(s) as AMF."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5655
+msgid "Export STL"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5656
+msgid "Export the model(s) as STL."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5661
+msgid "Slice the model and export toolpaths as G-code."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5666
+msgid "G-code viewer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5667
+msgid "Visualize an already sliced and saved G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5672
+msgid "Slice"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5673
+msgid "Slice the model as FFF or SLA based on the printer_technology configuration value."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5678
+msgid "Help"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5679
+msgid "Show this help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5684
+msgid "Help (FFF options)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5685
+msgid "Show the full list of print/G-code configuration options."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5689
+msgid "Help (SLA options)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5690
+msgid "Show the full list of SLA print configuration options."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5694
+msgid "Output Model Info"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5695
+msgid "Write information about the model to the console."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5699
+msgid "Save config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5700
+msgid "Save configuration to the specified file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5710
+msgid "Align XY"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5711
+msgid "Align the model to the given point."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5716
+msgid "Cut model at the given Z."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5740
+msgid "Center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5741
+msgid "Center the print around the given center."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5745
+msgid "Don't arrange"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5746
+msgid "Do not rearrange the given models before merging and keep their original XY coordinates."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5749
+msgid "Duplicate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5750
+msgid "Multiply copies by this factor."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5754
+msgid "Duplicate by grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5755
+msgid "Multiply copies by creating a grid."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5759
+msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5764
+msgid "Try to repair any non-manifold meshes (this option is implicitly added whenever we need to slice the model to perform the requested action)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5768
+msgid "Rotation angle around the Z axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5772
+msgid "Rotate around X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5773
+msgid "Rotation angle around the X axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5777
+msgid "Rotate around Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5778
+msgid "Rotation angle around the Y axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5783
+msgid "Scaling factor or percentage."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5788
+msgid "Detect unconnected parts in the given model(s) and split them into separate objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5791
+msgid "Scale to Fit"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5792
+msgid "Scale to fit the given volume."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5801
+msgid "Ignore non-existent config files"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5802
+msgid "Do not fail if a file supplied to --load does not exist."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5805
+msgid "Load config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5806
+msgid "Load configuration from the specified file. It can be used more than once to load options from multiple files."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5809
+msgid "Output File"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5810
+msgid "The file where the output will be written (if not specified, it will be based on the input file)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5815
+msgid "If enabled, the command line arguments are sent to an existing instance of GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides the \"single_instance\" configuration value from application preferences."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5826
+msgid "Data directory"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5827
+msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5830
+msgid "Logging level"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5831
+msgid "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\nFor example. loglevel=2 logs fatal, error and warning level messages."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5837
+msgid "Render with a software renderer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:5838
+msgid "Render with a software renderer. The bundled MESA software renderer is loaded instead of the default OpenGL driver."
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:27
+msgid "Error with zip archive"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:117
+msgid "Processing triangulated mesh"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:278
+msgid "Generating perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:396
+msgid "Preparing infill"
+msgstr ""
diff --git a/resources/localization/settings.ini b/resources/localization/settings.ini
index 6243ae8dc38..2f410ef7e52 100644
--- a/resources/localization/settings.ini
+++ b/resources/localization/settings.ini
@@ -1,9 +1,9 @@
-
-#data = C:/local/Slic3r/resources/localization/lang/TODO.po
-#data = C:/local/Slic3r/resources/localization/lang/SuperSlicer.po
-data = C:/local/Slic3r/resources/localization/lang/Slic3r++.po
-data = C:/local/Slic3r/resources/localization/lang/PrusaSlicer_fr.po
-
-input = C:/local/Slic3r/resources/localization/SuperSlicer.pot
-todo = C:/local/Slic3r/resources/localization/lang/TODO.po
-output = C:/local/Slic3r/resources/localization/lang/SuperSlicer.po
+
+#data = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/he_IL/TODO.po
+#data = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/he_IL/SuperSlicer.po
+data = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/he_IL/Slic3r++.po
+data = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/he_IL/PrusaSlicer_he.po
+
+input = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/SuperSlicer.pot
+todo = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/TODO.po
+output = C:/Users/or_Ga/Downloads/Programes/SuperSlicer_2.3.55.2_win64_20201124/HebTrans/target/SuperSlicer_final.po