SolidCraft's commands by area, generated by cargo xtask features from the command registry (solidcraft-cli commands). Planned commands are marked in their rows. Every command runs the same way from the toolbar, a script, solidcraft-cli exec <id> '<json>', the control channel and MCP; parameters are in the command reference (cargo xtask book). Status and plans: ROADMAP.
| Command | Id | Toolbar |
|---|---|---|
| Center Point Arc | sketch.arc.center_point |
SKETCH › CREATE |
| Tangent Arc | sketch.arc.tangent |
SKETCH › CREATE |
| 3-Point Arc | sketch.arc.three_point |
SKETCH › CREATE |
| 3D Arc | sketch.arc3d |
– |
| AutoConstrain | sketch.auto_constrain |
SKETCH › CONSTRAINTS |
| AutoConstrain from Datum | sketch.auto_constrain_from_datum |
SKETCH › CONSTRAINTS |
| Auto-Project Edges on Reference | sketch.auto_project |
– |
| Blend Curve | sketch.blend_curve |
SKETCH › MODIFY |
| Break | sketch.break |
SKETCH › MODIFY |
| Break Link | sketch.break_link |
– |
| Cancel Sketch | sketch.cancel |
SKETCH › FINISH SKETCH |
| Centerline | sketch.centerline |
SKETCH › CREATE |
| Chain | sketch.chain |
– |
| Distance and Angle Chamfer | sketch.chamfer.distance_angle |
SKETCH › MODIFY |
| Equal Distance Chamfer | sketch.chamfer.equal_distance |
SKETCH › MODIFY |
| Two Distance Chamfer | sketch.chamfer.two_distance |
SKETCH › MODIFY |
| Center Diameter Circle (C) | sketch.circle.center |
SKETCH › CREATE |
| 3-Point Circle | sketch.circle.three_point |
SKETCH › CREATE |
| 3-Tangent Circle | sketch.circle.three_tangent |
SKETCH › CREATE |
| 2-Point Circle | sketch.circle.two_point |
SKETCH › CREATE |
| 2-Tangent Circle | sketch.circle.two_tangent |
SKETCH › CREATE |
| Conic Curve | sketch.conic |
SKETCH › CREATE |
| Sketch Constrainer | sketch.constrainer |
SKETCH › CREATE |
| Along Axis | sketch.constraint.along_axis |
– |
| Coincident | sketch.constraint.coincident |
SKETCH › CONSTRAINTS |
| Collinear | sketch.constraint.collinear |
SKETCH › CONSTRAINTS |
| Concentric | sketch.constraint.concentric |
SKETCH › CONSTRAINTS |
| Curvature | sketch.constraint.curvature |
SKETCH › CONSTRAINTS |
| Equal | sketch.constraint.equal |
SKETCH › CONSTRAINTS |
| Fix/Unfix | sketch.constraint.fix |
SKETCH › CONSTRAINTS |
| Horizontal/Vertical | sketch.constraint.horizontal_vertical |
SKETCH › CONSTRAINTS |
| MidPoint | sketch.constraint.midpoint |
SKETCH › CONSTRAINTS |
| On Plane | sketch.constraint.on_plane |
– |
| Parallel | sketch.constraint.parallel |
SKETCH › CONSTRAINTS |
| Perpendicular | sketch.constraint.perpendicular |
SKETCH › CONSTRAINTS |
| Polygon | sketch.constraint.polygon |
SKETCH › CONSTRAINTS |
| Symmetry | sketch.constraint.symmetry |
SKETCH › CONSTRAINTS |
| Tangent | sketch.constraint.tangent |
SKETCH › CONSTRAINTS |
| Normal/Construction (X) | sketch.construction |
SKETCH › CREATE |
| Construction Line | sketch.construction_line |
SKETCH › CREATE |
| Construction Line at Angle | sketch.construction_line.angle |
SKETCH › CREATE |
| Angle Bisector | sketch.construction_line.bisector |
SKETCH › CREATE |
| Horizontal Construction Line | sketch.construction_line.horizontal |
SKETCH › CREATE |
| Parallel Construction Line | sketch.construction_line.parallel |
SKETCH › CREATE |
| Perpendicular Construction Line | sketch.construction_line.perpendicular |
SKETCH › CREATE |
| Tangent at Curve Point | sketch.construction_line.tangent_at |
SKETCH › CREATE |
| Tangent through External Point | sketch.construction_line.tangent_external |
SKETCH › CREATE |
| Common Tangent | sketch.construction_line.tangent_two |
SKETCH › CREATE |
| Vertical Construction Line | sketch.construction_line.vertical |
SKETCH › CREATE |
| Copy Sketch Entities | sketch.copy |
– |
| Create Sketch | sketch.create |
SOLID › CREATE |
| Cut Sketch Entities | sketch.cut |
– |
| Delete Sketch Entities | sketch.delete |
– |
| Sketch Dimension (D) | sketch.dimension |
SKETCH › CREATE |
| Move Dimension Text | sketch.dimension_text |
– |
| Drag Sketch Geometry | sketch.drag |
– |
| End Sketch Drag | sketch.drag_end |
– |
| Draw Dimensioned Sketch Geometry | sketch.draw.dimensioned |
– |
| Drawing Size | sketch.drawing_bounds |
– |
| Edit Sketch | sketch.edit |
– |
| Edit Text | sketch.edit_text |
– |
| Ellipse | sketch.ellipse |
SKETCH › CREATE |
| Equation Curve | sketch.equation_curve |
SKETCH › CREATE |
| Edit Equation Curve | sketch.equation_curve.edit |
– |
| Save As DXF | sketch.export_dxf |
– |
| Extend | sketch.extend |
SKETCH › MODIFY |
| Fillet | sketch.fillet |
SKETCH › MODIFY |
| Finish Sketch | sketch.finish |
SKETCH › FINISH SKETCH |
| Finish with AutoConstrain | sketch.finish_auto_constrain |
SKETCH › FINISH SKETCH |
| Fit Curves to Mesh Section | sketch.fit_curves_to_section |
SKETCH › CREATE |
| Constraint Glyphs | sketch.glyphs |
– |
| Include 3D Geometry | sketch.include_3d |
SKETCH › CREATE |
| Infinite Line | sketch.infinite |
– |
| Insert Airfoil | sketch.insert_airfoil |
SKETCH › INSERT |
| Insert DXF | sketch.insert_dxf |
SKETCH › INSERT |
| Insert SVG | sketch.insert_svg |
SKETCH › INSERT |
| Inspect Sketch | sketch.inspect |
SKETCH › INSPECT |
| Intersect | sketch.intersect |
SKETCH › CREATE |
| Intersection Curve | sketch.intersection_curve |
SKETCH › CREATE |
| Isoparametric Curve | sketch.isoparametric_curve |
SKETCH › CREATE |
| Line (L) | sketch.line |
SKETCH › CREATE |
| Midpoint Line | sketch.line.midpoint |
SKETCH › CREATE |
| 3D Line | sketch.line3d |
– |
| Loose Ends | sketch.loose_ends |
– |
| Tie Loose Ends | sketch.loose_ends.tie |
– |
| Mirror | sketch.mirror |
SKETCH › PATTERN |
| Move/Copy Sketch Entities | sketch.move |
SKETCH › MODIFY |
| Move 3D Point | sketch.move3d |
– |
| Drag Sketch Point | sketch.move_point |
– |
| Move Sketch Points | sketch.move_points |
– |
| Offset (O) | sketch.offset |
SKETCH › MODIFY |
| Break Offset Association | sketch.offset.break |
– |
| Sketch Palette Options | sketch.options |
– |
| Paste Sketch Entities | sketch.paste |
– |
| Circular Pattern | sketch.pattern.circular |
SKETCH › PATTERN |
| Rectangular Pattern | sketch.pattern.rectangular |
SKETCH › PATTERN |
| Point | sketch.point |
SKETCH › CREATE |
| Divide Curve | sketch.point.divide |
SKETCH › CREATE |
| 3D Point | sketch.point3d |
– |
| Circumscribed Polygon | sketch.polygon.circumscribed |
SKETCH › CREATE |
| Edge Polygon | sketch.polygon.edge |
SKETCH › CREATE |
| Inscribed Polygon | sketch.polygon.inscribed |
SKETCH › CREATE |
| Project (P) | sketch.project |
SKETCH › CREATE |
| Project To Surface | sketch.project_to_surface |
SKETCH › CREATE |
| Center Rectangle | sketch.rectangle.center |
SKETCH › CREATE |
| Edge Center Rectangle | sketch.rectangle.edge_center |
SKETCH › CREATE |
| Rounded Rectangle | sketch.rectangle.rounded |
SKETCH › CREATE |
| 3-Point Rectangle | sketch.rectangle.three_point |
SKETCH › CREATE |
| 2-Point Rectangle (R) | sketch.rectangle.two_point |
SKETCH › CREATE |
| Redefine Sketch Plane | sketch.redefine |
– |
| Replace Sketch | sketch.replace |
– |
| Sketch Scale | sketch.scale |
SKETCH › MODIFY |
| Center Point Arc Slot | sketch.slot.arc_center |
SKETCH › CREATE |
| Three Point Arc Slot | sketch.slot.arc_three_point |
SKETCH › CREATE |
| Center Point Slot | sketch.slot.center_point |
SKETCH › CREATE |
| Center to Center Slot | sketch.slot.center_to_center |
SKETCH › CREATE |
| Overall Slot | sketch.slot.overall |
SKETCH › CREATE |
| Snap Inference | sketch.snap |
– |
| Solve Sketch | sketch.solve |
– |
| Control Point Spline with Knots | sketch.spline.control_knots |
SKETCH › CREATE |
| Control Point Spline | sketch.spline.control_point |
SKETCH › CREATE |
| Control Point Spline (Degree 5) | sketch.spline.control_point_5 |
SKETCH › CREATE |
| Fit Point Spline | sketch.spline.fit_point |
SKETCH › CREATE |
| Add Tangent Handles | sketch.spline.handles |
– |
| Add Spline Point | sketch.spline.insert_point |
– |
| Remove Spline Point | sketch.spline.remove_point |
– |
| Reset Tangent Handles | sketch.spline.reset_handles |
– |
| Reverse Spline Direction | sketch.spline.reverse |
– |
| 3D Spline | sketch.spline3d |
– |
| Spun Profile | sketch.spun_profile |
SKETCH › CREATE |
| Text | sketch.text |
SKETCH › CREATE |
| Toggle Radius / Diameter | sketch.toggle_diameter |
– |
| Toggle Driven Dimension | sketch.toggle_driven |
– |
| Transform (G) | sketch.transform |
SKETCH › MODIFY |
| Trim (T) | sketch.trim |
SKETCH › MODIFY |
| Trim Along Path | sketch.trim.path |
– |
| Command | Id | Toolbar |
|---|---|---|
| Align | solid.align |
SOLID › MODIFY |
| Boundary Fill | solid.boundary_fill |
SOLID › CREATE |
| Bounding Solid | solid.bounding_solid |
SOLID › CREATE |
| Box | solid.box |
SOLID › CREATE |
| Cell Grid | solid.cell_grid |
– |
| Chamfer | solid.chamfer |
SOLID › MODIFY |
| Coil | solid.coil |
SOLID › CREATE |
| Combine | solid.combine |
SOLID › MODIFY |
| Cone | solid.cone |
SOLID › CREATE |
| Cylinder | solid.cylinder |
SOLID › CREATE |
| Draft | solid.draft |
SOLID › MODIFY |
| Emboss | solid.emboss |
SOLID › CREATE |
| Extrude (E) | solid.extrude |
SOLID › CREATE |
| Fillet (F) | solid.fillet |
SOLID › MODIFY |
| Hole (H) | solid.hole |
SOLID › CREATE |
| Loft | solid.loft |
SOLID › CREATE |
| Mirror | solid.mirror |
SOLID › CREATE |
| Move/Copy (M) | solid.move |
SOLID › MODIFY |
| Offset Face | solid.offset_face |
SOLID › MODIFY |
| Circular Pattern | solid.pattern.circular |
SOLID › CREATE |
| Pattern on Path | solid.pattern.path |
SOLID › CREATE |
| Rectangular Pattern | solid.pattern.rectangular |
SOLID › CREATE |
| Pipe | solid.pipe |
SOLID › CREATE |
| Press Pull (Q) | solid.press_pull |
SOLID › MODIFY |
| Remove | solid.remove |
SOLID › MODIFY |
| Replace Face | solid.replace_face |
SOLID › MODIFY |
| Revolve | solid.revolve |
SOLID › CREATE |
| Rib | solid.rib |
SOLID › CREATE |
| Scale | solid.scale |
SOLID › MODIFY |
| Shell | solid.shell |
SOLID › MODIFY |
| Sphere | solid.sphere |
SOLID › CREATE |
| Split Body | solid.split_body |
SOLID › MODIFY |
| Split Face | solid.split_face |
SOLID › MODIFY |
| Sweep | solid.sweep |
SOLID › CREATE |
| Thread | solid.thread |
SOLID › CREATE |
| Torus | solid.torus |
SOLID › CREATE |
| Web | solid.web |
SOLID › CREATE |
| Command | Id | Toolbar |
|---|---|---|
| Blend Surface | surface.blend |
SURFACE › CREATE |
| Boundary Surface | surface.boundary |
SURFACE › CREATE |
| Extend | surface.extend |
SURFACE › MODIFY |
| Surface Extrude | surface.extrude |
SURFACE › CREATE |
| Fair Surface | surface.fair |
SURFACE › MODIFY |
| Surface Fillet (planned: #769) | surface.fillet |
SURFACE › MODIFY |
| Surface Loft | surface.loft |
SURFACE › CREATE |
| Match Surface | surface.match |
SURFACE › MODIFY |
| Offset Surface | surface.offset |
SURFACE › CREATE |
| Patch | surface.patch |
SURFACE › CREATE |
| Reverse Normal | surface.reverse_normal |
SURFACE › MODIFY |
| Surface Revolve | surface.revolve |
SURFACE › CREATE |
| Ruled Surface | surface.ruled |
SURFACE › CREATE |
| Stitch | surface.stitch |
SURFACE › MODIFY |
| Surface Sweep | surface.sweep |
SURFACE › CREATE |
| Thicken | surface.thicken |
SURFACE › CREATE |
| Trim | surface.trim |
SURFACE › MODIFY |
| Unstitch | surface.unstitch |
SURFACE › MODIFY |
| Untrim | surface.untrim |
SURFACE › MODIFY |
| Command | Id | Toolbar |
|---|---|---|
| Axis | construct.axis |
SOLID › CONSTRUCT |
| Axis Through Edge | construct.axis.edge |
SOLID › CONSTRUCT |
| Axis Perpendicular To Face | construct.axis.normal_to_face |
SOLID › CONSTRUCT |
| Axis Through Cylinder/Cone/Torus | construct.axis.through_cylinder |
SOLID › CONSTRUCT |
| Axis Through Two Planes | construct.axis.two_planes |
SOLID › CONSTRUCT |
| Axis Through Two Points | construct.axis.two_points |
SOLID › CONSTRUCT |
| Plane | construct.plane |
SOLID › CONSTRUCT |
| Plane Along Path | construct.plane.along_path |
SOLID › CONSTRUCT |
| Plane at Angle | construct.plane.at_angle |
SOLID › CONSTRUCT |
| Plane Through Axis And Point | construct.plane.axis_point |
SOLID › CONSTRUCT |
| Midplane | construct.plane.midplane |
SOLID › CONSTRUCT |
| Offset Plane | construct.plane.offset |
SOLID › CONSTRUCT |
| Perpendicular Plane | construct.plane.perpendicular |
SOLID › CONSTRUCT |
| Plane Through Point, Square To Line | construct.plane.square_to_line |
SOLID › CONSTRUCT |
| Tangent Plane | construct.plane.tangent |
SOLID › CONSTRUCT |
| Plane Through Three Points | construct.plane.three_points |
SOLID › CONSTRUCT |
| Plane Through Two Edges | construct.plane.two_edges |
SOLID › CONSTRUCT |
| Point | construct.point |
SOLID › CONSTRUCT |
| Point Along Path | construct.point.along_path |
SOLID › CONSTRUCT |
| Point At Center Of Circle/Sphere/Torus | construct.point.center |
SOLID › CONSTRUCT |
| Point At Edge And Plane | construct.point.edge_plane |
SOLID › CONSTRUCT |
| Point Through Three Planes | construct.point.three_planes |
SOLID › CONSTRUCT |
| Point Through Two Edges | construct.point.two_edges |
SOLID › CONSTRUCT |
| Point At Vertex | construct.point.vertex |
SOLID › CONSTRUCT |
| Command | Id | Toolbar |
|---|---|---|
| Convert to Sheet Metal | sheet.convert |
SHEET METAL › CREATE |
| Export Bend Table | sheet.export_bend_table |
– |
| Export Flat Pattern as DXF | sheet.export_dxf |
– |
| Flange | sheet.flange |
SHEET METAL › CREATE |
| Create Flat Pattern | sheet.flat_pattern |
SHEET METAL › CREATE |
| Fold | sheet.fold |
SHEET METAL › CREATE |
| Hem | sheet.hem |
SHEET METAL › CREATE |
| Sheet Metal Rules | sheet.manage_rules |
SHEET METAL › MODIFY |
| Measure Sheet Metal Body | sheet.measure_body |
– |
| Path Flange | sheet.path_flange |
SHEET METAL › CREATE |
| Perforate | sheet.perforate |
SHEET METAL › CREATE |
| Recognize Sheet Metal | sheet.recognize |
SHEET METAL › CREATE |
| Refold | sheet.refold |
SHEET METAL › MODIFY |
| Sheet Metal Standard Library | sheet.rule_library |
– |
| List Sheet Metal Rules | sheet.rules |
– |
| Unfold | sheet.unfold |
SHEET METAL › MODIFY |
| Command | Id | Toolbar |
|---|---|---|
| Assign Plastic Rule | plastic.assign_rule |
PLASTIC › SETUP |
| Boss | plastic.boss |
PLASTIC › CREATE |
| Lip | plastic.lip |
PLASTIC › CREATE |
| Manage Plastic Rules | plastic.manage_rules |
PLASTIC › SETUP |
| Rest | plastic.rest |
PLASTIC › CREATE |
| List Plastic Rules | plastic.rules |
– |
| Snap Fit | plastic.snap_fit |
PLASTIC › CREATE |
| Command | Id | Toolbar |
|---|---|---|
| Activate Component | component.activate |
– |
| Break Link | component.break_link |
– |
| Capture Position | component.capture_position |
SOLID › POSITION |
| Find Identical Copies | component.copies |
– |
| Paste Bodies | component.copy_bodies |
– |
| New Component | component.create |
SOLID › ASSEMBLE |
| Cycle Component Color | component.cycle_color |
– |
| Delete Component | component.delete |
– |
| Edit in Place | component.edit_in_place |
– |
| Extract to File | component.extract |
– |
| Finish Edit | component.finish_edit |
– |
| Create Components from Bodies | component.from_bodies |
– |
| Hide Component History | component.hide_history |
– |
| Insert Design | component.insert_design |
SOLID › ASSEMBLE |
| List Links | component.links |
– |
| List Components | component.list |
– |
| Part Properties | component.metadata |
– |
| Change Part Properties | component.metadata.set |
– |
| Move Bodies to Component | component.move_bodies |
– |
| Move Features to Component | component.move_features |
– |
| Move Sketches to Component | component.move_sketches |
– |
| Move Sketches to Their Parts | component.move_sketches.to_parts |
– |
| Paste from Another Design | component.paste_from_design |
– |
| Paste New | component.paste_new |
– |
| Component Physical Properties | component.properties |
– |
| Relink Source | component.relink |
– |
| Rename Component | component.rename |
– |
| Replace with Link | component.replace_with_link |
– |
| Revert Position | component.revert_position |
SOLID › POSITION |
| Show Component History | component.show_history |
– |
| Unlock Contents | component.unlock |
– |
| Update Links | component.update_links |
– |
| Command | Id | Toolbar |
|---|---|---|
| As-Built Joint | joint.as_built |
SOLID › ASSEMBLE |
| Cam | joint.cam |
SOLID › ASSEMBLE |
| Joint (J) | joint.create |
SOLID › ASSEMBLE |
| Delete Joint | joint.delete |
– |
| Drive Joints | joint.drive |
SOLID › ASSEMBLE |
| Edit Joint | joint.edit |
– |
| Find Joint Limits | joint.find_limits |
– |
| Gear | joint.gear |
SOLID › ASSEMBLE |
| Inspect Joint | joint.inspect |
– |
| Joint Limits | joint.limits |
– |
| List Joints | joint.list |
– |
| Motion Link | joint.motion_link |
SOLID › ASSEMBLE |
| Joint Origin | joint.origin |
SOLID › CREATE |
| Rack and Pinion | joint.rack_pinion |
SOLID › ASSEMBLE |
| Reach Point | joint.reach |
– |
| Rigid Group | joint.rigid_group |
SOLID › ASSEMBLE |
| Screw | joint.screw |
SOLID › ASSEMBLE |
| Solve Joints | joint.solve |
– |
| Sweep Joint | joint.sweep |
– |
| Command | Id | Toolbar |
|---|---|---|
| Activate Configuration | config.activate |
– |
| Configuration Column | config.column |
– |
| Configure | config.configure |
SOLID › CONFIGURE |
| Preview Configuration | config.preview |
– |
| Configuration Row | config.row |
– |
| Configuration Rule | config.rule |
– |
| Configuration Rules | config.rules |
– |
| Display Configuration Table | config.table |
SOLID › CONFIGURE |
| Update Configuration from Design | config.update_from_design |
– |
| Command | Id | Toolbar |
|---|---|---|
| Add Recorded Feature | timeline.add |
– |
| Compute All | timeline.compute_all |
SOLID › MODIFY |
| Copy Features | timeline.copy |
– |
| Delete (Delete) | timeline.delete |
SOLID › MODIFY |
| Feature Dependents | timeline.dependents |
– |
| Edit Feature | timeline.edit |
– |
| Export Command Script | timeline.export_script |
– |
| New Feature Folder | timeline.group |
– |
| Inspect Feature | timeline.inspect |
– |
| Move Timeline Items | timeline.move_many |
– |
| Move Features to Folder | timeline.move_to_group |
– |
| Paste Features | timeline.paste |
– |
| Play History | timeline.play |
INSPECT › HISTORY |
| Edit Feature | timeline.redefine |
– |
| Rename | timeline.rename |
– |
| Rename Feature Folder | timeline.rename_group |
– |
| Reorder Feature | timeline.reorder |
– |
| Reorder Features | timeline.reorder_many |
– |
| Roll History Marker | timeline.roll_to |
– |
| Move Timeline Marker | timeline.rollback |
– |
| Suppress Feature | timeline.suppress |
– |
| Remove Feature Folders | timeline.ungroup |
– |
| Command | Id | Toolbar |
|---|---|---|
| Accessibility Analysis | inspect.accessibility |
SKETCH › INSPECT |
| View Analysis | inspect.analysis |
– |
| Center of Mass | inspect.center_of_mass |
SKETCH › INSPECT |
| Classify Points | inspect.classify_points |
– |
| Clearance | inspect.clearance |
– |
| Component Colors | inspect.colored_components |
SOLID › INSPECT |
| Compare Bodies | inspect.compare |
– |
| Compare Picture | inspect.compare_picture |
– |
| Continuity Analysis | inspect.continuity |
SURFACE › INSPECT |
| Curvature Comb Analysis | inspect.curvature_comb |
SKETCH › INSPECT |
| Curvature Map Analysis | inspect.curvature_map |
SKETCH › INSPECT |
| Draft Analysis | inspect.draft |
SKETCH › INSPECT |
| Environment Map Analysis | inspect.environment_map |
SKETCH › INSPECT |
| Interference | inspect.interference |
SOLID › INSPECT |
| Isocurve Analysis | inspect.isocurve |
SKETCH › INSPECT |
| Measure (I) | inspect.measure |
SOLID › INSPECT |
| Minimum Radius Analysis | inspect.minimum_radius |
SKETCH › INSPECT |
| Parameter Sweep | inspect.parameter_sweep |
– |
| Compare Parameter Variants | inspect.parameter_variants |
– |
| Section Analysis | inspect.section |
SOLID › INSPECT |
| Silhouette | inspect.silhouette |
– |
| Zebra Analysis | inspect.zebra |
SKETCH › INSPECT |
| Command | Id | Toolbar |
|---|---|---|
| Copy Design File | file.copy |
– |
| Export | file.export |
– |
| Export 3MF | file.export_3mf |
– |
| Export OBJ | file.export_obj |
– |
| Export SDF Model | file.export_sdf |
– |
| Export STEP | file.export_step |
– |
| Export STL | file.export_stl |
– |
| Export URDF | file.export_urdf |
– |
| Export Current View as DXF | file.export_view_dxf |
– |
| PCB Files | file.gerber_files |
– |
| Signing Keys | file.gpg_keys |
– |
| Import with Plugin | file.import |
– |
| Clear Reused Imports | file.import_cache_clear |
– |
| Insert PCB (Gerber) | file.insert_gerber |
SOLID › INSERT |
| Insert Mesh | file.insert_mesh |
SOLID › INSERT |
| Insert STEP | file.insert_step |
SOLID › INSERT |
| Move Design File | file.move |
– |
| New Design (Ctrl+N) | file.new |
– |
| Open with EasyPrint | file.open_in_easyprint |
– |
| Save (Ctrl+S) | file.save |
– |
| Save As (Ctrl+Shift+S) | file.save_as |
– |
| Save As Mesh | file.save_mesh |
INSERT › FILES |
| Send to Slicer | file.send_to_slicer |
INSERT › FILES |
| Installed Slicers | file.slicers |
– |
| Move Design File to Trash | file.trash |
– |
| Verify Signature | file.verify |
– |
| Command | Id | Toolbar |
|---|---|---|
| Open (Ctrl+O) | doc.open |
– |
| Recover Design | doc.recover |
– |
| Discard Recovered Design | doc.recovery_discard |
– |
| Recoverable Designs | doc.recovery_list |
– |
| Command | Id | Toolbar |
|---|---|---|
| Checkpoint | edit.checkpoint |
– |
| Redo (Ctrl+Y) | edit.redo |
– |
| Repeat Last Command (Shift+R) | edit.repeat |
– |
| Restore Checkpoint | edit.restore_checkpoint |
– |
| Undo (Ctrl+Z) | edit.undo |
– |
| Command | Id | Toolbar |
|---|---|---|
| Appearance (A) | appearance.assign |
SOLID › MODIFY |
| Appearance Chain | appearance.chain |
– |
| Copy Look (Ctrl+Alt+C) | appearance.copy |
– |
| Favorite Look | appearance.favorite |
– |
| Appearance Library | appearance.library |
– |
| List Appearances | appearance.list |
– |
| Paint Appearance (B) | appearance.paint |
– |
| Paste Look (Ctrl+Alt+V) | appearance.paste |
– |
| Pick Up Appearance (I) | appearance.pick_up |
– |
| Replace Appearance | appearance.replace |
– |
| Command | Id | Toolbar |
|---|---|---|
| Bill of Materials | assembly.bom |
SOLID › INSPECT |
| Change Item Number | assembly.bom.item.set |
– |
| Renumber Items | assembly.bom.renumber |
– |
| Constrain | assembly.constraint.create |
SOLID › ASSEMBLE |
| Edit Constraint | assembly.constraint.edit |
– |
| Mass Properties | assembly.mass_properties |
– |
| Command | Id | Toolbar |
|---|---|---|
| Print Face (Ctrl+B) | body.print_face |
– |
| Rename Body | body.rename |
– |
| Repair Part | body.repair |
– |
| Command | Id | Toolbar |
|---|---|---|
| Collapse All | browser.collapse_all |
– |
| Expand All | browser.expand_all |
– |
| Search the Browser | browser.find |
– |
| New Group | browser.group |
– |
| Move Browser Items | browser.move |
– |
| Order Browser Items | browser.order |
– |
| Rename Group | browser.rename_group |
– |
| Move to Component | browser.reparent |
– |
| Show/Hide Planes | browser.toggle_planes |
– |
| Show/Hide Reference Geometry | browser.toggle_reference |
– |
| Ungroup | browser.ungroup |
– |
| Show/Hide | browser.visibility |
– |
| Command | Id | Toolbar |
|---|---|---|
| Calibrate Canvas | canvas.calibrate |
– |
| Decal | canvas.decal |
SKETCH › INSERT |
| Delete Canvas | canvas.delete |
– |
| Edit Canvas | canvas.edit |
SKETCH › INSERT |
| Frame Sketch | canvas.frame_sketch |
– |
| Canvas | canvas.insert |
SKETCH › INSERT |
| Straighten Canvas | canvas.straighten |
– |
| Canvas to Sketch | canvas.to_sketch |
– |
| Command | Id | Toolbar |
|---|---|---|
| Check Contact | contact.check |
– |
| New Contact Set | contact.create |
SOLID › ASSEMBLE |
| Disable Contact | contact.disable_all |
SOLID › ASSEMBLE |
| Edit Contact Set | contact.edit |
– |
| Enable All Contact | contact.enable_all |
SOLID › ASSEMBLE |
| Enable Contact Sets | contact.enable_sets |
SOLID › ASSEMBLE |
| List Contact Sets | contact.list |
– |
| Command | Id | Toolbar |
|---|---|---|
| Crash Report | diagnostics.crash_report |
– |
| Crash Reports | diagnostics.crash_reports |
– |
| Delete Crash Reports | diagnostics.crash_reports.clear |
– |
| Crash Test | diagnostics.crash_test |
– |
| Profile | diagnostics.profile |
– |
| Report an Issue | diagnostics.report_issue |
– |
| Report Status | diagnostics.report_issue_status |
– |
| Validation | diagnostics.validation |
– |
| Command | Id | Toolbar |
|---|---|---|
| Inspect Design | document.inspect |
– |
| Design Properties | document.metadata |
– |
| Remove Design Property | document.metadata.remove |
– |
| Change Design Properties | document.metadata.set |
– |
| Design Revision | document.revision |
– |
| Change Design Units | document.units |
– |
| Command | Id | Toolbar |
|---|---|---|
| Align Annotations (planned: #4896) | drawing.annotations.align |
DRAWING ANNOTATE › ARRANGE |
| Space Annotations (planned: #4896) | drawing.annotations.space |
DRAWING ANNOTATE › ARRANGE |
| Balloon (planned: #3874) | drawing.balloon |
DRAWING PARTS › ASSEMBLY |
| Add Balloon | drawing.balloon.add |
– |
| Auto Balloon (planned: #13067) | drawing.balloon.auto |
DRAWING PARTS › ASSEMBLY |
| Edit Balloon | drawing.balloon.edit |
– |
| Inspect Balloon | drawing.balloon.inspect |
– |
| Repair Balloon | drawing.balloon.repair |
– |
| Preview View Breaks | drawing.break.preview |
– |
| Center Mark (planned: #4896) | drawing.centre_mark |
DRAWING ANNOTATE › SYMBOLS |
| Check Drawing | drawing.check |
– |
| Check Drawing (planned: #4894) | drawing.check.planned |
DRAWING REVIEW › CHANGES |
| Close Drawing | drawing.close |
– |
| Create Drawing | drawing.create |
– |
| Datum (planned: #4896) | drawing.datum |
– |
| Delete Drawing | drawing.delete |
– |
| Drawing Dimension (planned: #4896) | drawing.dimension |
DRAWING ANNOTATE › MEASURE |
| Add Drawing Dimension | drawing.dimension.add |
– |
| Chain (planned: #4896) | drawing.dimension.chain |
DRAWING ANNOTATE › MEASURE |
| Edit Drawing Dimension | drawing.dimension.edit |
– |
| Model Dimensions | drawing.dimension.from_model |
– |
| Model Dimensions (planned: #13054) | drawing.dimension.from_model.planned |
DRAWING ANNOTATE › MEASURE |
| Inspect Drawing Dimension | drawing.dimension.inspect |
– |
| Repair Drawing Dimension | drawing.dimension.repair |
– |
| Suggest (planned: #4896) | drawing.dimension.suggest |
DRAWING ANNOTATE › MEASURE |
| Tidy (planned: #4896) | drawing.dimension.tidy |
DRAWING ANNOTATE › ARRANGE |
| Export Sheet | drawing.export |
DRAWING REVIEW › OUTPUT |
| Delete Sheet Fill | drawing.fill.delete |
– |
| Edit Sheet Fill | drawing.fill.edit |
– |
| Inspect Sheet Fill | drawing.fill.inspect |
– |
| List Fill Profiles | drawing.fill.profiles |
– |
| GD&T (planned: #7257) | drawing.gdt |
DRAWING ANNOTATE › SYMBOLS |
| Hatch (planned: #7062) | drawing.hatch |
DRAWING LAYOUT › INSERT |
| Hole Callout (planned: #4896) | drawing.hole_callout |
DRAWING ANNOTATE › MEASURE |
| Insert Image (planned: #4894) | drawing.image |
DRAWING LAYOUT › INSERT |
| Add Image | drawing.image.add |
– |
| Inspect Drawing | drawing.inspect |
– |
| Leader Note (planned: #4896) | drawing.leader |
DRAWING ANNOTATE › NOTES |
| Drawing Line (planned: #4890) | drawing.line |
– |
| List Drawings | drawing.list |
– |
| Drawing Note (planned: #4896) | drawing.note |
DRAWING ANNOTATE › NOTES |
| Add Note | drawing.note.add |
– |
| Chamfer Note (planned: #13028) | drawing.note.chamfer |
DRAWING ANNOTATE › NOTES |
| Edit Note | drawing.note.edit |
– |
| Inspect Note | drawing.note.inspect |
– |
| Open Drawing | drawing.open |
– |
| Parts List (planned: #3874) | drawing.parts_list |
DRAWING PARTS › ASSEMBLY |
| Renumber (planned: #3874) | drawing.parts_list.renumber |
DRAWING PARTS › ASSEMBLY |
| Delete Fill Pattern | drawing.pattern.delete |
– |
| Import Fill Pattern | drawing.pattern.import |
– |
| Inspect Fill Pattern | drawing.pattern.inspect |
– |
| Print Drawing (Ctrl+P) | drawing.print |
DRAWING REVIEW › OUTPUT |
| Drawing Properties | drawing.properties |
– |
| Remove Drawing Property | drawing.properties.remove |
– |
| Change Drawing Properties | drawing.properties.set |
– |
| Replace Model (planned: #13029) | drawing.replace_model |
DRAWING REVIEW › CHANGES |
| Browse Drawing Resources (planned: #4894) | drawing.resources |
– |
| Issue Revision | drawing.revise |
– |
| Issue Revision (planned: #3874) | drawing.revise.planned |
DRAWING REVIEW › REVISION |
| Add Drawing Revision (planned: #4894) | drawing.revision |
DRAWING REVIEW › REVISION |
| Add Revision | drawing.revision.add |
– |
| Delete Revision | drawing.revision.delete |
– |
| Edit Revision | drawing.revision.edit |
– |
| Add Revision Tag | drawing.revision.tag.add |
– |
| Revision Tag (planned: #3874) | drawing.revision.tag.add.planned |
DRAWING REVIEW › REVISION |
| Delete Revision Tag | drawing.revision.tag.delete |
– |
| Edit Revision Tag | drawing.revision.tag.edit |
– |
| Revision Table (planned: #4894) | drawing.revision_table |
DRAWING PARTS › TABLES |
| Draw Sheet | drawing.scene |
– |
| What Is Under a Point | drawing.scene.hit |
– |
| Line Under a Point | drawing.scene.line |
– |
| Drawing Settings | drawing.set |
– |
| Add Sheet | drawing.sheet.add |
– |
| Delete Sheet | drawing.sheet.delete |
– |
| Reorder Sheets | drawing.sheet.reorder |
– |
| Sheet Settings | drawing.sheet.set |
– |
| Sheet Sketch (planned: #5425) | drawing.sheet_sketch |
DRAWING LAYOUT › INSERT |
| Create Sheet Sketch | drawing.sketch.create |
– |
| Edit Sheet Sketch | drawing.sketch.edit |
– |
| Fill Sheet Sketch | drawing.sketch.fill |
– |
| Inspect Sheet Sketch | drawing.sketch.inspect |
– |
| Drawing Status | drawing.status |
– |
| Surface Texture (planned: #7258) | drawing.surface_texture |
DRAWING ANNOTATE › SYMBOLS |
| Define Symbol | drawing.symbol.define |
– |
| Delete Symbol | drawing.symbol.delete |
– |
| Edit Symbol | drawing.symbol.edit |
– |
| Add Table | drawing.table.add |
– |
| Delete Table | drawing.table.delete |
– |
| Edit Table | drawing.table.edit |
– |
| Edit Table (planned: #3874) | drawing.table.edit.planned |
DRAWING PARTS › TABLES |
| Inspect Table | drawing.table.inspect |
– |
| Apply Drawing Template | drawing.template.apply |
– |
| List Drawing Templates | drawing.template.list |
– |
| Save as Drawing Template | drawing.template.save |
– |
| Title Block Logo | drawing.title_block.logo |
– |
| Update Drawing | drawing.update |
– |
| Update Drawing (planned: #4892) | drawing.update.planned |
DRAWING REVIEW › CHANGES |
| Auxiliary View | drawing.view.auxiliary |
– |
| Auxiliary View (planned: #13044) | drawing.view.auxiliary.planned |
DRAWING LAYOUT › VIEWS |
| Base View | drawing.view.base |
– |
| Base View (planned: #4816) | drawing.view.base.planned |
DRAWING LAYOUT › VIEWS |
| Break View (planned: #7578) | drawing.view.break |
DRAWING LAYOUT › VIEWS |
| Copy View to Sheet | drawing.view.copy_to_sheet |
– |
| Copy to sheet (planned: #4894) | drawing.view.copy_to_sheet.planned |
DRAWING LAYOUT › ARRANGE |
| Detail View | drawing.view.detail |
– |
| Detail View (planned: #4816) | drawing.view.detail.planned |
DRAWING LAYOUT › VIEWS |
| Draft View (planned: #4894) | drawing.view.draft |
DRAWING LAYOUT › VIEWS |
| Edit Drawing View | drawing.view.edit |
– |
| Flat Pattern View | drawing.view.flat |
– |
| Flat Pattern View (planned: #13030) | drawing.view.flat_pattern |
DRAWING LAYOUT › VIEWS |
| Inspect Drawing View | drawing.view.inspect |
– |
| Move View | drawing.view.move |
– |
| Move View to Sheet | drawing.view.move_to_sheet |
– |
| Move to sheet (planned: #4894) | drawing.view.move_to_sheet.planned |
DRAWING LAYOUT › ARRANGE |
| Pictorial View (planned: #13044) | drawing.view.pictorial |
DRAWING LAYOUT › VIEWS |
| Projected View | drawing.view.projected |
– |
| Projected View (planned: #4816) | drawing.view.projected.planned |
– |
| Projected View at Point | drawing.view.projection_for |
– |
| Section View | drawing.view.section |
– |
| Section View (planned: #4816) | drawing.view.section.planned |
DRAWING LAYOUT › VIEWS |
| Drawing View Snapshot | drawing.view.snapshot |
– |
| Standard Views | drawing.view.standard |
– |
| Align Views (planned: #4894) | drawing.views.align |
DRAWING LAYOUT › ARRANGE |
| Weld (planned: #7259) | drawing.weld |
DRAWING ANNOTATE › SYMBOLS |
| Command | Id | Toolbar |
|---|---|---|
| List Commands | engine.commands |
– |
| Describe Command | engine.describe |
– |
| Command | Id | Toolbar |
|---|---|---|
| Exploded View | explode.create |
SOLID › ASSEMBLE |
| Delete Exploded View | explode.delete |
– |
| List Exploded Views | explode.list |
– |
| Show Exploded View | explode.show |
– |
| Command | Id | Toolbar |
|---|---|---|
| Evaluate Expression | expr.evaluate |
– |
| Command | Id | Toolbar |
|---|---|---|
| Delete Face | face.delete |
SOLID › MODIFY |
| Command | Id | Toolbar |
|---|---|---|
| End Cap | frame.end_cap |
WELDMENTS › CREATE |
| Frame Member | frame.member |
WELDMENTS › CREATE |
| Multi-Trim Corner | frame.multi_trim |
– |
| Insert Profile | frame.profile.insert |
– |
| Profile Library | frame.profile.list |
– |
| Profile Properties | frame.profile.properties |
– |
| Remove Tube | frame.remove_member |
– |
| Rotate Member | frame.rotate_member |
WELDMENTS › MODIFY |
| Command | Id | Toolbar |
|---|---|---|
| Apply Layout | layout.apply |
– |
| Inspect Layout | layout.get |
– |
| Reset Layout | layout.reset |
– |
| Save Layout | layout.save |
– |
| Select Layout Workspace | layout.workspace.select |
– |
| Command | Id | Toolbar |
|---|---|---|
| Apply Local Library Entry | library.apply |
– |
| Export Design Library | library.export |
– |
| Inspect Local Library | library.inspect |
– |
| Command | Id | Toolbar |
|---|---|---|
| Physical Material | material.assign |
SOLID › MODIFY |
| New Physical Material | material.create |
– |
| Delete Physical Material | material.delete |
– |
| Edit Physical Material | material.edit |
– |
| Inspect Physical Material | material.inspect |
– |
| List Materials | material.list |
– |
| Directional Elastic Modulus | material.properties.directional |
– |
| Validate Physical Material Data | material.properties.validate |
– |
| Command | Id | Toolbar |
|---|---|---|
| Convert Mesh | mesh.convert |
– |
| Command | Id | Toolbar |
|---|---|---|
| List Body Features | model.body_features |
– |
| List Edges | model.edges |
– |
| List Faces | model.faces |
– |
| Read Body Mesh | model.mesh |
– |
| List Threads | model.threads |
– |
| Command | Id | Toolbar |
|---|---|---|
| Delete Motion Study | motion.delete |
– |
| Export Motion Study | motion.export |
– |
| Export Motion Animation | motion.export_animation |
– |
| Motion Interference | motion.interference |
– |
| List Motion Studies | motion.list |
– |
| Play Motion Study | motion.play |
– |
| Plot Motion Study | motion.plot |
– |
| Simulate Motion | motion.simulate |
– |
| Motion Study | motion.study |
SOLID › ASSEMBLE |
| Motion Trace | motion.trace |
SOLID › ASSEMBLE |
| Edit Motion Trace | motion.trace.edit |
– |
| Keep Motion Trace | motion.trace.keep |
– |
| Command | Id | Toolbar |
|---|---|---|
| Add Note | note.add |
– |
| Delete Note | note.delete |
– |
| List Notes | note.list |
– |
| Edit Note | note.update |
– |
| Command | Id | Toolbar |
|---|---|---|
| Align Occurrence | occurrence.align |
– |
| Bill of Materials Type | occurrence.bom_type |
– |
| Paste (Instance) | occurrence.copy |
– |
| Drag Occurrence | occurrence.drag |
– |
| Ground | occurrence.ground |
– |
| Move Occurrence | occurrence.move |
– |
| Occurrence Physical Properties | occurrence.properties |
– |
| Move to Component | occurrence.reparent |
– |
| Command | Id | Toolbar |
|---|---|---|
| Run Panel Header Action | panel.action |
– |
| Activate Panel Tab | panel.activate |
– |
| Close Panel | panel.close |
– |
| Collapse Panel Section | panel.collapse |
– |
| Dismiss Panel Peek | panel.dismiss |
– |
| Float Panel | panel.float |
– |
| Focus Panel | panel.focus |
– |
| Focus Next Panel | panel.focus.next |
– |
| Focus Previous Panel | panel.focus.previous |
– |
| List Panels | panel.list |
– |
| Move Panel | panel.move |
– |
| Move Panel to Next Zone | panel.move.next_zone |
– |
| Redock Native Panel Section | panel.native_close |
– |
| Open Panel | panel.open |
– |
| Peek Collapsed Panel | panel.peek |
– |
| Pop Out Panel | panel.popout |
– |
| Reset Panel Sash | panel.reset_pair |
– |
| Resize Panel Section | panel.resize |
– |
| Resize Panel Sash | panel.resize_pair |
– |
| Resize Panel Sash Down (Down) | panel.sash.down |
– |
| Resize Panel Sash Left (Left) | panel.sash.left |
– |
| Reset Focused Panel Sash | panel.sash.reset |
– |
| Resize Panel Sash Right (Right) | panel.sash.right |
– |
| Resize Panel Sash Up (Up) | panel.sash.up |
– |
| Toggle Focused Panel | panel.toggle |
– |
| Command | Id | Toolbar |
|---|---|---|
| Add User Parameter | parameters.add |
– |
| Change Parameters | parameters.change |
SOLID › MODIFY |
| Comment Parameter | parameters.comment |
– |
| Complete Expression | parameters.complete |
– |
| Delete Parameter | parameters.delete |
– |
| Export Parameters | parameters.export |
– |
| Favorite Parameter | parameters.favorite |
– |
| Parameter Graph | parameters.graph |
– |
| Import Parameters | parameters.import |
– |
| List Parameters | parameters.list |
– |
| Move Parameter | parameters.move |
– |
| Rename Parameter | parameters.rename |
– |
| Parameter Users | parameters.users |
– |
| Command | Id | Toolbar |
|---|---|---|
| Insert Fastener | parts.fastener |
SOLID › INSERT |
| Insert Part | parts.insert |
– |
| Standard Parts | parts.library |
– |
| Change Part Size | parts.resize |
– |
| Resolve Fastener Seats | parts.seats |
– |
| Command | Id | Toolbar |
|---|---|---|
| Check Plugin | plugin.check |
– |
| Edit Plugin Operation | plugin.edit |
– |
| Plugin Approvals | plugin.grants |
– |
| Inspect Plugin | plugin.inspect |
– |
| Install Plugin | plugin.install |
– |
| List Plugins | plugin.list |
– |
| Remove Plugin | plugin.remove |
– |
| Revoke Plugin Approvals | plugin.revoke |
– |
| Run Plugin | plugin.run |
– |
| List Plugin Tools | plugin.tools |
– |
| Command | Id | Toolbar |
|---|---|---|
| Delete Point Cloud | pointcloud.delete |
– |
| Point Cloud Deviation | pointcloud.deviation |
– |
| Edit Point Cloud | pointcloud.edit |
– |
| Insert Point Cloud | pointcloud.insert |
SOLID › INSERT |
| Point Clouds | pointcloud.list |
– |
| Reload Point Cloud | pointcloud.reload |
– |
| Command | Id | Toolbar |
|---|---|---|
| Layered Surface Aging | render.aging.describe |
– |
| Render Backends | render.backends |
– |
| Render All Shots | render.batch |
RENDER › BATCH |
| Frame Render Subject | render.camera.fit |
– |
| Inspect Render Camera | render.camera.get |
– |
| Set Render Camera | render.camera.set |
– |
| Cancel Render | render.cancel |
– |
| Save Clear Coat | render.coat.bind |
– |
| Remove Clear Coat | render.coat.unbind |
– |
| Compare Images | render.compare |
RENDER › RESULT |
| Move Render Comparison Divider | render.compare.divider |
– |
| Lens and Creative Effects | render.effects.describe |
– |
| Set Render Environment | render.environment.set |
– |
| Export Render Image | render.export |
– |
| Inspect HDR Source | render.hdr.inspect |
– |
| Apply Library Opaque Appearance | render.library.appearance.apply |
– |
| Inspect Render Library Resource | render.library.describe |
– |
| Apply Built-in HDR Environment | render.library.environment.apply |
– |
| Browse Render Library | render.library.list |
– |
| Prepare Physical Reference | render.library.physical.prepare |
– |
| Inspect Original Surface Map | render.library.preview |
– |
| Apply Authored Studio Lights | render.library.studio.apply |
– |
| Prepare Authored Studio Lights | render.library.studio.prepare |
– |
| Save Surface Binding | render.library.surface.bind |
– |
| Prepare Authored Surface Maps | render.library.surface.prepare |
– |
| Remove Surface Binding | render.library.surface.unbind |
– |
| Find Render Library Targets | render.library.targets |
– |
| Add Light | render.lights.add |
– |
| Duplicate Render Light | render.lights.duplicate |
– |
| List Render Lights | render.lights.list |
– |
| Mute Light | render.lights.mute |
RENDER SCENE › LIGHTS |
| Remove Render Light | render.lights.remove |
– |
| Set Render Light | render.lights.set |
– |
| Solo Light | render.lights.solo |
RENDER SCENE › LIGHTS |
| Save Optical Binding | render.optics.bind |
– |
| Remove Optical Binding | render.optics.unbind |
– |
| Set Render Output Size | render.output.size |
– |
| Check Render Request | render.preflight |
– |
| Copy Render Check Report | render.preflight.copy |
– |
| Apply Native Studio | render.preset.apply |
– |
| Review Native Studio | render.preset.resolve |
– |
| Review Fixed Sampling Budget | render.quality.prepare |
– |
| Close Render Image (Escape) | render.result.close |
– |
| Copy Render Image | render.result.copy |
– |
| Discard Render Result | render.result.discard |
– |
| Retain Displayed Render Result | render.result.pin |
– |
| Regrade Linear Master | render.result.regrade |
– |
| Select Render Result | render.result.select |
– |
| View Render Image | render.result.view |
– |
| Inspect Render Scene | render.scene |
RENDER › SCENE |
| Apply Render Camera | render.settings.apply |
– |
| Save Render Settings with HDR | render.settings.capture_hdr |
– |
| Render Settings | render.settings.get |
– |
| Save Render Settings | render.settings.set |
– |
| Duplicate Render Shot | render.shot.duplicate |
– |
| Remove Render Shot | render.shot.remove |
– |
| Rename Render Shot | render.shot.rename |
– |
| Save Physical Render Background | render.stage.backdrop |
– |
| Remove Render Stage | render.stage.clear |
– |
| Save Render Ground | render.stage.ground |
– |
| Render Image (R) | render.start |
RENDER › IMAGE |
| Render Progress | render.status |
– |
| Import Surface Maps | render.surface.import |
– |
| List Embedded Surface Images | render.texture.list |
– |
| Remove Embedded Surface Image | render.texture.remove |
– |
| Command | Id | Toolbar |
|---|---|---|
| Select All (Ctrl+A) | select.all |
– |
| Clear Selection | select.clear |
– |
| Selection filter | select.filter |
– |
| Selection Mode | select.mode |
– |
| Select Same Look | select.same_look |
– |
| Select | select.set |
– |
| Select Sharp Edges | select.sharp_edges |
– |
| Command | Id | Toolbar |
|---|---|---|
| Delete | selection.delete |
– |
| Get Selection | selection.get |
– |
| Command | Id | Toolbar |
|---|---|---|
| Apply Settings Profile | settings.profile.apply |
– |
| Delete Settings Profile | settings.profile.delete |
– |
| Export Settings Profile | settings.profile.export |
– |
| Import Settings Profile | settings.profile.import |
– |
| Settings Profiles | settings.profile.list |
– |
| Rename Settings Profile | settings.profile.rename |
– |
| Save Settings Profile | settings.profile.save |
– |
| Command | Id | Toolbar |
|---|---|---|
| Delete Plugin File | storage.delete_blob |
– |
| Read Plugin Data | storage.get |
– |
| List Plugin Data | storage.list |
– |
| Patch Plugin Data | storage.patch |
– |
| Set Plugin Data | storage.set |
– |
| Command | Id | Toolbar |
|---|---|---|
| Apply View Layout | tab.layout.apply |
– |
| List Saved View Layouts | tab.layout.list |
– |
| Remove Saved View Layout | tab.layout.remove |
– |
| Rename Saved View Layout | tab.layout.rename |
– |
| Save View Layout | tab.layout.save |
– |
| Show View | tab.view.activate |
– |
| Show View Beside | tab.view.beside |
– |
| Close View | tab.view.close |
– |
| Close Other Views | tab.view.close_others |
– |
| Close Views to the Right | tab.view.close_right |
– |
| Duplicate View | tab.view.duplicate |
– |
| Equal Sizes | tab.view.equal_sizes |
– |
| Show Views Together | tab.view.layout |
– |
| Link Cameras Between Views | tab.view.link |
– |
| List Views | tab.view.list |
– |
| Move View | tab.view.move |
– |
| Move View to Window (Ctrl+Alt+W) | tab.view.move_to_window |
– |
| Open Another View (Ctrl+T) | tab.view.open |
– |
| Open View in New Window (Ctrl+Alt+O) | tab.view.pop_out |
– |
| Rename View (F2) | tab.view.rename |
– |
| Reopen Closed View (Ctrl+Shift+T) | tab.view.reopen |
– |
| Reset All Cameras | tab.view.reset_cameras |
– |
| Clean Window (Present) (F11) | tab.window.clean |
– |
| Close Window | tab.window.close |
– |
| Show Window | tab.window.focus |
– |
| List Windows | tab.window.list |
– |
| Move Window to Display | tab.window.move_to_display |
– |
| Get Window Options | tab.window.options |
– |
| Rename Window | tab.window.rename |
– |
| Set Window Options | tab.window.set_options |
– |
| Command | Id | Toolbar |
|---|---|---|
| Customize App Bar... | ui.appBarCustomize |
– |
| Reset App Bar | ui.appBarReset |
– |
| Toggle Assistant (Ctrl+Shift+A) | ui.assistant |
– |
| Dialog OK | ui.dialog_ok |
– |
| Search Commands (S) | ui.palette |
– |
| Show/Hide Selection (V) | ui.toggle_visibility |
– |
| Command | Id | Toolbar |
|---|---|---|
| Ambient Occlusion | view.ambient_occlusion |
– |
| View Angles | view.angle_readout |
– |
| Restore Named View | view.apply |
– |
| Back View (Ctrl+2) | view.back |
– |
| Bottom View (Ctrl+6) | view.bottom |
– |
| Delete Named View | view.delete |
– |
| Fit (F6) | view.fit |
– |
| Front View (Ctrl+1) | view.front |
– |
| Graphics Preset | view.graphics_preset |
– |
| Grid | view.grid |
– |
| Ground Shadow | view.ground_shadow |
– |
| History layout | view.history_layout |
– |
| Home View | view.home |
– |
| Isometric View (Ctrl+7) | view.isometric |
– |
| Workspace layout | view.layout |
– |
| Left View (Ctrl+3) | view.left |
– |
| List Named Views | view.list |
– |
| Navigate View | view.navigate |
– |
| Navigation Bar | view.navigation_bar |
– |
| Custom View Navigator | view.navigator |
– |
| Next Tab (Ctrl+Tab) | view.next_tab |
– |
| Normal to Selection | view.normal_to |
– |
| Origin Axes Across the Whole View | view.origin_axes_across_view |
– |
| Perspective view | view.perspective |
– |
| Pick by Ray | view.pick |
– |
| Previous Tab (Ctrl+Shift+Tab) | view.previous_tab |
– |
| Rename Named View | view.rename |
– |
| Render Browser | view.render_browser |
– |
| Move Render Dock | view.render_dock |
RENDER › SCENE |
| Render Focus View | view.render_focus |
– |
| Render Frame Guides | view.render_frame |
– |
| Render Inspector | view.render_inspector |
– |
| Pause or Resume Live Render | view.render_live |
– |
| Render selection | view.render_select |
– |
| Render Stage | view.render_stage |
– |
| Ribbon Tabs Only | view.ribbon_tabs_only |
– |
| Right View (Ctrl+4) | view.right |
– |
| New Named View | view.save |
– |
| Set View Compass | view.set_compass |
– |
| Shots Strip | view.shots_strip |
– |
| Continuous Orbit | view.spin |
– |
| Viewport Status Details | view.status_details |
– |
| Viewport Status Items | view.status_items |
– |
| Navigation Tool | view.tool |
– |
| Drag to Zoom | view.tool.zoom |
– |
| Top View (Ctrl+5) | view.top |
– |
| Visual Style | view.visual_style |
– |
| Command | Id | Toolbar |
|---|---|---|
| Use Window Options as Default | window.options.use_as_default |
– |