| description |
|---|
Mapping between Reason Studio effects and Arturia Keylab Essential |
- Alligator
- Echo
- Pulveriser
- Softube BassAmp
- Softube Amp
- Synchronous Timed Effect Modulator
- Audiomatic Retro Transformer
- Scream 4 Sound Destruction Unit
- BV512 Vocoder
- Neptune Pitch Adjuster and Voice Synth
- Reverb RV7000 Mk II Advanced Reverb
- MClass Equalizer
- MClass Compressor
- MClass Maximizer
- MClass Stereo Imager
- RV-7 Digital Reverb
- DDL-1 Digital Delay Line
- D-11 Foldback Distortion
- ECF-42 Envelope Controlled Filter
- CF-101 Chorus/Flanger
- PH-90 Phaser
- UN-16 Unison
- COMP-01 Auto Make-up Gain Compressor
- PEQ-2 Two Band Parametric EQ
- MagmaSonic Classic Filter
- Softube Saturation Knob
- Quartet Chorus Ensemble
- Sweeper Modulation Effect
- Master Bus Compressor
- Channel Dynamics Compressor & Gate
- Channel EQ Equalizer
- Ripley Space Delay
- Sidechain Tool
- Stereo Tool
The first line of the Arturia Keyboad LCD should display "Alligator" and the second one, the name of the selected patch or the active filter depending which variation is active.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Master level | |
| Fader 1 | Amp Env Attack | When main variation is active |
| Fader 2 | Amp Env Decay | When main variation is active |
| Fader 3 | Amp Env Release | When main variation is active |
| Fader 5 | Filter Env Attack | When main variation is active |
| Fader 6 | Filter Env Decay | When main variation is active |
| Fader 7 | Filter Env Release | When main variation is active |
| Encoder 1 | High Pass LFO Amount | When "High Pass filter" variation is active |
| Encoder 2 | High Pass Frequency | When "High Pass filter" variation is active |
| Encoder 3 | High Pass Resonance | When "High Pass filter" variation is active |
| Encoder 4 | High Pass Env Amount | When "High Pass filter" variation is active |
| Encoder 5 | High Pass Drive Amount | When "High Pass filter" variation is active |
| Encoder 6 | High Pass Phaser Amount | When "High Pass filter" variation is active |
| Encoder 7 | High Pass Delay Amount | When "High Pass filter" variation is active |
| Encoder 8 | High Pass Pan | When "High Pass filter" variation is active |
| Master Pan | High Pass Volume | When "High Pass filter" variation is active |
| Encoder 1 | Band Pass LFO Amount | When "Band Pass filter" variation is active |
| Encoder 2 | Band Pass Frequency | When "Band Pass filter" variation is active |
| Encoder 3 | Band Pass Resonance | When "Band Pass filter" variation is active |
| Encoder 4 | Band Pass Env Amount | When "Band Pass filter" variation is active |
| Encoder 5 | Band Pass Drive Amount | When "Band Pass filter" variation is active |
| Encoder 6 | Band Pass Phaser Amount | When "Band Pass filter" variation is active |
| Encoder 7 | Band Pass Delay Amount | When "Band Pass filter" variation is active |
| Encoder 8 | Band Pass Pan | When "Band Pass filter" variation is active |
| Master Pan | Band Pass Volume | When "Band Pass filter" variation is active |
| Encoder 1 | Low Pass LFO Amount | When "Low Pass filter" variation is active |
| Encoder 2 | Low Pass Frequency | When "Low Pass filter" variation is active |
| Encoder 3 | Low Pass Resonance | When "Low Pass filter" variation is active |
| Encoder 4 | Low Pass Env Amount | When "Low Pass filter" variation is active |
| Encoder 5 | Low Pass Drive Amount | When "Low Pass filter" variation is active |
| Encoder 6 | Low Pass Phaser Amount | When "Low Pass filter" variation is active |
| Encoder 7 | Low Pass Delay Amount | When "Low Pass filter" variation is active |
| Encoder 8 | Low Pass Pan | When "Low Pass filter" variation is active |
| Master Pan | Low Pass Volume | When "Low Pass filter" variation is active |
| Part1 / Next | Keyboard Shortcut Variations | To switch between "main", "High Pass Filter", "Band Pass Filter" & "Low Pass Filter" variations |
| Part2 / Prev | Keyboard Shortcut Variations | To switch between "main", "High Pass Filter", "Band Pass Filter" & "Low Pass Filter" variations |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "The Echo" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Ducking | |
| Master Pan | Dry/Wet Balance | |
| Encoder 1 | Delay Time | |
| Encoder 2 | Right Ch Time Offset | |
| Encoder 3 | Feedback | |
| Encoder 4 | Right Ch Feedback Offset | |
| Encoder 5 | Drive Amount | |
| Encoder 6 | Drive Type | |
| Encoder 7 | Envelope | |
| Encoder 8 | Wobble | |
| Fader 1 | Ping-Pong Mode | |
| Fader 2 | Ping-Pong Pan | |
| Fader 3 | Diffuse Spread | |
| Fader 4 | Diffuse Amount | |
| Fader 5 | Filter Frequency | |
| Fader 6 | Filter Resonance | |
| Fader 7 | LFO Rate | |
| Fader 8 | LFO Amount | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Pulveriser" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Blend | |
| Master Pan | Volume | |
| Encoder 1 | Squash | |
| Encoder 2 | Dirt | |
| Encoder 3 | Filter Mode | |
| Encoder 4 | Tremor to Frequency | |
| Encoder 5 | Follower to Rate | |
| Encoder 6 | Tremor Rate | |
| Encoder 7 | Tremor Lag | |
| Encoder 8 | Tremor to Volume | |
| Fader 1 | Release | |
| Fader 2 | Tone | |
| Fader 3 | Filter Frequency | |
| Fader 4 | Peak | |
| Fader 5 | Follower to Frequency | |
| Fader 6 | Follower Threshold | |
| Fader 7 | Follower Attack | |
| Fader 8 | Follower Release | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "BassAmp" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Volume | |
| Encoder 1 | Drive | |
| Encoder 2 | Bass | |
| Encoder 3 | Middle | |
| Encoder 4 | Mid Freq | |
| Encoder 5 | Treble | |
| Fader 1 | Amp Switch | |
| Fader 2 | Cab Switch | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Softube Amp" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Volume | |
| Encoder 1 | Gate | |
| Encoder 2 | Gain | |
| Encoder 3 | Bass | |
| Encoder 4 | Mid | |
| Encoder 5 | Treble | |
| Encoder 6 | Poweramp Gain | |
| Fader 1 | Amp Switch | |
| Fader 2 | Cab Switch | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Synchronous" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Master level | |
| Master Pan | Dry/Wet | |
| Encoder 1 | Dist Amount | |
| Encoder 2 | Dist Character | |
| Encoder 3 | Filter Freq | |
| Encoder 4 | Filter Reso | |
| Encoder 5 | Delay Amount | |
| Encoder 6 | Delay Feedback | |
| Encoder 7 | Reverb Amount | |
| Encoder 8 | Reverb Decay | |
| Fader 1 | Dist On/Off | |
| Fader 2 | Filter On/Off | |
| Fader 3 | Delay On/Off | |
| Fader 4 | Reverb On/Off | |
| Fader 8 | Level | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Audiomatic" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Volume | |
| Master Pan | Dry/Wet | |
| Encoder 1 | Input Gain | |
| Encoder 2 | Transform | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Scream 4" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master Fader | Master level | |
| Encoder 1 | Damage Control | |
| Encoder 2 | Damage Type | |
| Encoder 3 | Parameter 1 | |
| Encoder 4 | Parameter 2 | |
| Encoder 5 | Body Resonance | |
| Encoder 6 | Body Scale | |
| Encoder 7 | Body Auto | |
| Encoder 8 | Body Type | |
| Fader 1 | Cut Lo | |
| Fader 2 | Cut Mid | |
| Fader 3 | Cut Hi | |
| Fader 6 | Damage On/Off | |
| Fader 7 | Cut On/Off | |
| Fader 8 | Body On/Off | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "BV512 Vocoder" and the second one, the range of active's bandes depending which variation is active.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Master pan | Dry/Wet | |
| Encoder 1 | Band Count | |
| Encoder 2 | Vocoder/Equalizer | |
| Encoder 3 | Attack | |
| Encoder 4 | Decay | |
| Encoder 5 | Shift | |
| Encoder 6 | HF Emphasis | |
| Fader <1-8> | Bande Level <1-8> | When "Band Lv 1-8" variation is active |
| Fader <1-8> | Bande Level <9-16> | When "Band Lv 9-16" variation is active |
| Fader <1-8> | Bande Level <17-24> | When "Band Lv 17-24" variation is active |
| Fader <1-8> | Bande Level <25-32> | When "Band Lv 25-32" variation is active |
| Part1 / Next | Keyboard Shortcut Variations | To switch between "Band Lv 1-8", "Band Lv 9-16", "Band Lv 17-24" & "Band Lv 25-32" variations |
| Part2 / Prev | Keyboard Shortcut Variations | To switch between "Band Lv 1-8", "Band Lv 9-16", "Band Lv 17-24" & "Band Lv 25-32" variations |
The first line of the Arturia Keyboad LCD should display "Neptune" and the second one, the target note name.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Pitch Bend Range | |
| Encoder 2 | Vibrato Rate | |
| Encoder 3 | Catch Zone | |
| Encoder 4 | Cent | |
| Encoder 5 | Semitones | |
| Encoder 6 | Formant Shift | |
| Fader 1 | Correction Speed | |
| Fader 2 | Preserve Expression | |
| Fader 3 | Pitched Signal Level | |
| Fader 4 | Voice Synth Level |
The first line of the Arturia Keyboad LCD should display "RV7000" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Decay | |
| Encoder 2 | HF Damp | |
| Encoder 3 | Hi EQ | |
| Main Encoder | Dry/Wet | |
| Fader <1-8> | Soft Knob <1-8> | |
| Jog Wheel | Select Previous/Next Preset | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "MClass" and the second one "Equalizer".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Low Shelf Frequency | |
| Encoder 2 | Low Shelf Gain | |
| Fader 1 | Low Shelf Q | |
| Encoder 3 | Parametric 1 Frequency | |
| Encoder 4 | Parametric 1 Gain | |
| Fader 3 | Parametric 1 Q | |
| Encoder 5 | Parametric 2 Frequency | |
| Encoder 6 | Parametric 2 Gain | |
| Fader 5 | Parametric 2 Q | |
| Encoder 7 | Hi Shelf Frequency | |
| Encoder 8 | Hi Shelf Gain | |
| Fader 7 | Hi Shelf Q |
The first line of the Arturia Keyboad LCD should display "MClass" and the second one "Comrpessor".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Input Gain | |
| Encoder 2 | Threshold | |
| Encoder 3 | Ratio | |
| Encoder 4 | Attack | |
| Encoder 5 | Release | |
| Main Encoder | Output Gain |
The first line of the Arturia Keyboad LCD should display "MClass" and the second one "Maximizer".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Input Gain | |
| Encoder 2 | Attack Speed | |
| Encoder 3 | Release Speed | |
| Encoder 4 | Output Gain | |
| Encoder 5 | Soft Clip Amount |
The first line of the Arturia Keyboad LCD should display "MClass" and the second one "Stereo Imager".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Low Width | |
| Encoder 2 | X-Over Frequency | |
| Encoder 3 | High Width | |
| Encoder 4 | Solo Mode |
The first line of the Arturia Keyboad LCD should display "RV-7 (reverb)" and the second one the name of the selected algorithm.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Size | |
| Encoder 2 | Decay | |
| Encoder 3 | Damping | |
| Encoder 4 | Dry/Wet | |
| Jog Wheel | Select Previous/Next Algorithm | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "DDL-1 (delay)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | DelayTime (steps) | |
| Encoder 2 | DelayTime (ms) | |
| Encoder 3 | Feedback | |
| Encoder 4 | Pan | |
| Encoder 5 | Dry/Wet Balance |
The first line of the Arturia Keyboad LCD should display "D-11 (dist.)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Amount | |
| Encoder 2 | Foldback |
The first line of the Arturia Keyboad LCD should display "ECF-42 (filter)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Frequency | |
| Encoder 2 | Resonance | |
| Encoder 3 | Env Amount | |
| Encoder 4 | Velocity | |
| Encoder 5 | Attack | |
| Encoder 6 | Decay | |
| Encoder 7 | Sustain | |
| Encoder 8 | Release | |
| Master Pan | Mode |
The first line of the Arturia Keyboad LCD should display "CF-101 (Ch/Fl)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Delay | |
| Encoder 2 | Feedback | |
| Encoder 3 | Rate | |
| Encoder 4 | Modulation Amount |
The first line of the Arturia Keyboad LCD should display "PH-90 (Phaser)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Frequency | |
| Encoder 2 | Split | |
| Encoder 3 | Width | |
| Encoder 4 | Rate | |
| Encoder 5 | Frequency Modulation | |
| Encoder 6 | Feedback |
The first line of the Arturia Keyboad LCD should display "UN-16 (Unison)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Voice Count | |
| Encoder 2 | Detune | |
| Encoder 3 | Dry/Wet |
The first line of the Arturia Keyboad LCD should display "COMP-01 (Comp.)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Ratio | |
| Encoder 2 | Threshold | |
| Encoder 3 | Attack | |
| Encoder 4 | Release | |
| Encoder 5 | Gain |
The first line of the Arturia Keyboad LCD should display "PEQ-2 (filter)".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Filter A Freq | |
| Encoder 2 | Filter A Q | |
| Encoder 3 | Filter A Gain | |
| Encoder 4 | Filter B Freq | |
| Encoder 5 | Filter B Q | |
| Encoder 6 | Filter B Gain |
The first line of the Arturia Keyboad LCD should display "MagmaSonic".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Cutoff | |
| Encoder 2 | Resonance | |
| Encoder 3 | Spice | |
| Encoder 4 | Volume |
The first line of the Arturia Keyboad LCD should display "Saturation Knob" and the second one, the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Saturation | |
| Encoder 2 | Saturation Type | |
| Jog Wheel | Select Previous/Next Algorithm | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Quartet" and the selected effect in brackets. The second line should display the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Chorus Delay | When the Chorus effect is selected |
| Encoder 2 | Chorus Depth | When the Chorus effect is selected |
| Encoder 3 | Chorus Rate | When the Chorus effect is selected |
| Encoder 4 | Chorus Feedback | When the Chorus effect is selected |
| Encoder 5 | Chorus Width | When the Chorus effect is selected |
| Master Pan | Chorus DryWet | When the Chorus effect is selected |
| Encoder 1 | BBD Delay | When the BBD effect is selected |
| Encoder 2 | BBD Depth | When the BBD effect is selected |
| Encoder 3 | BBD Rate | When the BBD effect is selected |
| Encoder 4 | BBD Noise | When the BBD effect is selected |
| Encoder 5 | BBD Width | When the BBD effect is selected |
| Master Pan | BBD DryWet | When the BBD effect is selected |
| Encoder 1 | FFT Size | When the FFT effect is selected |
| Encoder 2 | FFT Depth | When the FFT effect is selected |
| Encoder 3 | FFT Start | When the FFT effect is selected |
| Encoder 4 | FFT End | When the FFT effect is selected |
| Encoder 5 | FFT Width | When the FFT effect is selected |
| Master Pan | FFT DryWet | When the FFT effect is selected |
| Encoder 1 | Grain Phase | When the FFT effect is selected |
| Encoder 2 | Grain Size | When the FFT effect is selected |
| Encoder 3 | Grain Depth | When the FFT effect is selected |
| Encoder 4 | Grain Jitter | When the FFT effect is selected |
| Encoder 5 | Grain Density | When the FFT effect is selected |
| Encoder 6 | Grain Width | When the FFT effect is selected |
| Master Pan | Grain DryWet | When the FFT effect is selected |
| Jog Wheel | Patch selection | when "Preset" is selected |
| Jog Wheel | Effect selection | when "Cat/Char" is selected |
The first line of the Arturia Keyboad LCD should display "Sweeper" and the selected effect in brackets. The second line should display the name of the selected patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Freq | |
| Encoder 2 | Bandwidth | |
| Encoder 3 | Feedback | |
| Encoder 4 | Filter Drive | |
| Encoder 5 | Reso | |
| Encoder 8 | Spread | |
| Fader 1 | LFO Freq Mod | |
| Fader 2 | Env Freq Mod | |
| Fader 3 | LFO Amp Mod | |
| Fader 4 | Env Amp Mod | |
| Master Pan | DryWet | |
| Master Volume | Volume | |
| Jog Wheel | Patch selection | when "Preset" is selected |
| Jog Wheel | Effect type selection | when "Cat/Char" is selected |
The first line of the Arturia Keyboad LCD should display "Master" and the second one "Bus Compressor".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Input Gain | |
| Encoder 2 | Threshold | |
| Encoder 3 | Ratio | |
| Encoder 4 | Attack | |
| Encoder 5 | Release | |
| Encoder 5 | Make-Up Gain | |
| Master Pan | Mix |
The first line of the Arturia Keyboad LCD should display "Channel Dynamics" and the second one "Comp. & Gate".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | Input Gain | |
| Encoder 2 | Comp Ratio | |
| Encoder 3 | Comp Threshold | |
| Encoder 4 | Comp Release | |
| Encoder 5 | Gate Range | |
| Encoder 6 | Gate Hold | |
| Encoder 7 | Gate Threshold | |
| Encoder 8 | GGate Release | |
| Master Pan | Mix |
The first line of the Arturia Keyboad LCD should display "Channel EQ" and the second one "Equalizer".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Encoder 1 | HPF Frequency | |
| Encoder 2 | LPF Frequency | |
| Encoder 3 | LF Gain | |
| Encoder 4 | LF Frequency | |
| Encoder 5 | HF Gain | |
| Encoder 6 | HF Frequency | |
| Fader 1 | LMF Gain | |
| Fader 2 | LMF Frequency | |
| Fader 3 | LMF Q | |
| Fader 4 | HMF Gain | |
| Fader 5 | HMF Frequency | |
| Fader 6 | HMF Q | |
| Master Pan | Gain |
The first line of the Arturia Keyboad LCD should display "Ripley" and the second the name of the patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Fader 1 | Time Multiplier | |
| Fader 2 | Filter Type | |
| Encoder 1 | Synced Time | |
| Encoder 2 | Wobbler Amount | |
| Encoder 3 | Space Amount | |
| Encoder 4 | Noise Amount | |
| Encoder 5 | Dist Dry-Wet | |
| Encoder 6 | Digital Dry-Wet | |
| Encoder 7 | Dry-Wet | |
| Encoder 8 | Ducker Amount | |
| Jog Wheel | Patch selection | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Sidechain Tool" and the second the name of the patch.
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Fader 1 | Rate | |
| Fader 2 | Attack Time | |
| Fader 3 | Hold Time | |
| Fader 4 | Release Time | |
| Fader 5 | Slide | |
| Fader 6 | Ducking Amount | |
| Encoder 1 | Sidechain Gain | |
| Encoder 2 | Sidechain Threshold | |
| Encoder 3 | Sidechain Attack | |
| Encoder 4 | Sidechain Release | |
| Encoder 5 | Ratio | |
| Master Pan | Effect Mode | |
| Master Volume | Master Volume | |
| Jog Wheel | Patch selection | when "Preset" is selected |
The first line of the Arturia Keyboad LCD should display "Stereo Tool".
| Arturia Keyboard surface | Reason Command | Comment |
|---|---|---|
| Fader 1 | Widening | |
| Fader 2 | Low Bypass | |
| Fader 3 | Frequency |