ld2420.yaml

## 人在传感器
esphome:
  name: presense
  name_add_mac_suffix: true

esp8266:
  board: esp01_1m
  framework:
    version: recommended

api:
captive_portal:
logger:
  baud_rate: 0 # 和 UART 冲突，关闭日志
ota:
  - platform: esphome
    password: 123456
web_server:
  port: 80

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  output_power: 19.8dB
  fast_connect: true
  ap:
    password: "12345678"

ld2420:
uart:
  rx_pin:
    number: GPIO3 
  tx_pin: 
    number: GPIO1 
  baud_rate: 9600

sensor:
  - platform: uptime
    name: "${friendly_name} Uptime"
    id: uptime_sensor
    update_interval: 15s
  - platform: ld2420
    moving_distance:
      name : Moving Distance

binary_sensor:
  - platform: ld2420
    has_target:
      name: Presence

## 下面都是配置项,可以移除
select:
  - platform: ld2420
    operating_mode:
      name: Operating Mode

number:
  - platform: ld2420
    presence_timeout:
      name: Detection Presence Timeout
    min_gate_distance:
      name: Detection Gate Minimum
    max_gate_distance:
      name: Detection Gate Maximum

    gate_select:
      name: Select Gate to Set
    still_threshold:
      name: Set Still Threshold Value
    move_threshold:
      name: Set Move Threshold Value

    gate_move_sensitivity:
      name: Move Calibration Sensitivity Factor
    gate_still_sensitivity:
      name: Still Calibration Sensitivity Factor

    gate_0:
      move_threshold:
        name: Gate 0 Move Threshold
      still_threshold:
        name: Gate 0 Still Threshold
    gate_1:
      move_threshold:
        name: Gate 1 Move Threshold
      still_threshold:
        name: Gate 1 Still Threshold
    gate_2:
      move_threshold:
        name: Gate 2 Move Threshold
      still_threshold:
        name: Gate 2 Still Threshold
    gate_3:
      move_threshold:
        name: Gate 3 Move Threshold
      still_threshold:
        name: Gate 3 Still Threshold

button:
  - platform: ld2420
    apply_config:
      name: Apply Config
    factory_reset:
      name: Factory Reset
    restart_module:
      name: Restart Module
    revert_config:
      name: Undo Edits