[HDMI2USB] Create a 3G-SDI extension board for HDMI2USB

[mithro]

More technical details at

• HDMI2USB-misoc-firmware #158
• HDMI2USB-jahanzeb-firmware #11

Brief explanation

Add support for 3G Serial digital interface for the HDMI2USB.

This project will let us push and pull lots of data over a wider range of protocols / cables / system.

Detailed Explanation

SDI interface is used by a large number of high end devices. It would be good for the HDMI2USB firmware to support the standards and protocols.

This will probably require development of a TOFE expansion board which has SDI connectors, otherwise some way to adapt the DisplayPort connector to SDI.

Further reading

• SDI Information - http://en.wikipedia.org/wiki/Serial_digital_interface
• Xilinx Information - http://www.xilinx.com/products/intellectual-property/SMPTE_SDI.htm
• TOFE Interface

Contacts

• Potential Mentors: @shenki @mithro @enjoy-digital
• Mailing list: [email protected]

[mithro]

Standard       Name                 Bitrates                                               Example Video Formats
SMPTE 259M     SD-SDI               270 Mbit/s, 360 Mbit/s, 143 Mbit/s, and 177 Mbit/s     480i, 576i
SMPTE 344M     ED-SDI               540 Mbit/s                                             480p, 576p
SMPTE 292M     HD-SDI               1.485 Gbit/s, and 1.485/1.001 Gbit/s                   720p, 1080i
SMPTE 372M     Dual Link HD-SDI     2.970 Gbit/s, and 2.970/1.001 Gbit/s                   1080p
SMPTE 424M     3G-SDI               2.970 Gbit/s, and 2.970/1.001 Gbit/s                   1080p

[chexov]

I am interested in paying somebody who can bring this extension board to finished PCB.
The goal is to get Video, Audio and KLV data out from SDI. Please ping me if you are interested.

[mithro]

We are currently applying to the German prototype fund to get a FOSS SDI core and the expansion board developed.

…

On 17 Jun. 2017 9:45 am, "Anton P. Linevich" ***@***.***> wrote: I am interested in paying somebody who can bring this extension board to finished PCB. The goal is to get Video, Audio and KLV data out from SDI. Please ping me if you are interested. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AABS3DHwUz8Ow5JZTmfj2Q4l-8lJB5F8ks5sExOwgaJpZM4Ag8ft> .

[mithro]

@felixheld - FYI

[mithro]

@felixheld is working on a FOSS SDI video core here -> https://github.com/felixheld/photonSDI

GitHub

felixheld/photonSDI

Contribute to photonSDI development by creating an account on GitHub.