diff --git a/CA Auto Update/autoupdateapps.txt b/CA Auto Update/autoupdateapps.txt new file mode 100644 index 0000000..c9600df --- /dev/null +++ b/CA Auto Update/autoupdateapps.txt @@ -0,0 +1,19 @@ +Docker Auto Update Settings=Настройки автоматического обновления Docker-ов +Plugin Auto Update Settings=Настройки автоматического обновления плагинов +Autoupdate ON=Автообновление включено +Autoupdate OFF=Автообновление выключено +Send Notifications On Update=Отправлять уведомления об обновлении +Delay in days before updating applications=Задержка в днях до обновления приложений +Auto Update All Plugins=Автоматическое обновление всех плагинов +Update Check Frequency=Частота проверки обновлений +Support=Служба поддержки +Day Of Week=День недели +Day Of Month=День месяца +Hour=Часа +Minute=Минуты +Custom cron expression=Пользовательское выражение cron +Credits=Авторы +Docker Must Be Enabled For This Module To Operate= +Time to wait for graceful stop before killing=Время ожидания корректной остановки перез принудительным завершением +Update All Docker Applications= +Do not overlap with autoupdate=Не пересекаться с автообновлениями diff --git a/CA Config File Edit/configedit.txt b/CA Config File Edit/configedit.txt new file mode 100644 index 0000000..68f0ae4 --- /dev/null +++ b/CA Config File Edit/configedit.txt @@ -0,0 +1,12 @@ +Select File=Выберите файл +Error reading file=Ошибка чтения файла +No Backup File Found=Файл резервной копии не найден +Select a file to edit=Выберите файл для редактирования +note editing a binary file could have unintended consequences=обратите внимание, что редактирование двоичного файла может иметь непредвиденные последствия +No file selected=Файл не выбран +Backup File=Файл резервной копии +Editing=Редактирование +Generally, it is not recommended to change the format=Как правило, менять формат не рекомендуется. +Credits=Авторы +No Backup File Found=Файл резервной копии не найден +File Format=Формат файла diff --git a/Community Apps/apps.txt b/Community Apps/apps.txt index 6252fad..99f1b0f 100644 --- a/Community Apps/apps.txt +++ b/Community Apps/apps.txt @@ -1,80 +1,120 @@ -Cancel= +Cancel=Отмена ; My PSAs / banners -Happy New Year= -Happy Holidays from Andrew, Tracey, and family= -Please Enjoy Responsibly= +Happy New Year=С Новым Годом +Happy Holidays from Andrew, Tracey, and family=Поздравления с праздником от Эндрю, Трейси и семьи +Please Enjoy Responsibly=Пожалуйста, пользуйтесь ответственно Popup Blocked CA requires popups to be enabled under certain circumstances You must white list your server within your browser to allow popups= Docker Service Not Enabled - Only Plugins Available To Be Installed Or Managed= -Community Applications works best when cookies are enabled in your browser Certain features may not be available= +Docker system failed to start - Only Plugins Available To Be Installed Or Managed= +Array not started - Only Plugins Available To Be Installed Or Managed=Массив не запущен — для установки или управления доступны только плагины +Community Applications works best when cookies are enabled in your browser Certain features may not be available=Приложения сообщества работают лучше всего, когда в вашем браузере включены файлы cookie. Некоторые функции могут быть недоступны Backup Server Active Some icons may not appear, and plugin installations may be affected= +Debugging enabled This significantly increases the memory used by your browser=Отладка включена. Это значительно увеличивает объем памяти, используемой вашим браузером +Browser translation detected Display issues may result=Обнаружен перевод браузера. Могут возникнуть проблемы с отображением ; Sorting Options -Sorting options= -Sorting options unavailable= -Sort By Name Ascending= -Sort By Name Descending= -Sort By Downloads= -Sort By Trend= -Sort By Date Added= +Sort By=Сортировать по +Name Ascending= +Name Descending= +Downloads=Загрузкам +Date Added=Дате добавления +Number Of Apps=Количеству приложений ; Initial disclaimer translations -Disclaimer= +Disclaimer=Отказ от ответственности All applications listed here are 3rd party additions to Unraid Neither the authors of Community Applications nor Limetech make any warranty as to the suitability of any application listed here= Every attempt is made to ensure that only safe and compatible applications are present= -Application Policy= -I Understand= -Installations of apps disabled You must accept the warning to be able to install applications= -Click here= +Application Policy=Политика применения +I Understand=Я понимаю +Installations of apps disabled You must accept the warning to be able to install applications=Установка приложений отключена. Вы должны принять предупреждение, чтобы иметь возможность устанавливать приложения. +Click here=Нажмите здесь ; Plugin Disclaimer Community Applications contains both docker containers and plugin applications Plugins are designed for OS enhancements, and run with full privileges on your system and are clearly identified within CA= -Plugin Note= +Plugin Note=Примечание к плагину ; Multi Install -Install Plugin Applications= -Select all on page= +Install Plugin Applications=Установить приложения-плагины +Select all on page=Выбрать всё на странице ; Searches -Search= -Please enter search term= +Search=Поиск Click Here To Get More Results From DockerHub= -No Matching Applications Found On Docker Hub= -No Matching Applications Found= - +No Matching Applications Found=Подходящих приложений не найдено + +; Repository Related +%s removed as favourite repository= +%s set as favourite repository=%s установлен как избранный репозиторий +Click to remove favourite repository=Нажмите, чтобы удалить избранный репозиторий +Click to set %s as favourite repository=Нажмите, чтобы установить %s в качестве избранного репозитория +Search for apps in repository=Поиск приложения в репозитории +No description present=Описание отсутствует +Go to the forum page=Перейти на страницу форума +Go to the webpage=Перейти на веб-страницу +Go to reddit=Перейти на Reddit +Go to facebook=Перейти на facebook +Go to discord=Перейти в Discord +Go to forum profile=Перейти к профилю форума +Show Profile=Показать профиль +SHOW MORE=ПОКАЗАТЬ БОЛЬШЕ +SHOW LESS=ПОКАЗАТЬ МЕНЬШЕ +Read more=Читать далее +Total Applications=Всего приложений +Total Known Downloads=Всего известных загрузок +Total Docker Applications= +Total Plugin Applications=Всего приложений плагинов +Total Languages=Всего языков +Average Downloads Per App=Среднее количество загрузок приложения +Web Page=Веб-страница +Forum=Форум +Forum Profile=Профиль на форуме +Profile=Профиль +Facebook= +Reddit= +Twitter= +Discord= +Search Apps=Искать в приложениях +Registry= +Details=Подробности +Added=Добавлен ; Install Plugin title of openbox -Install Plugin= +Install Plugin=Установить плагин +BACK=НАЗАД ; Remove App from previously installed -Delete Template= -Yes, delete it= +Delete Template=Удалить шаблон +Yes, delete it=Да, удалить ; Uninstall popup -Uninstall Application= -Yes uninstall it= +Uninstall Application=Удалить приложение +Yes uninstall it=Да, удалить ; Remove Private Application -Remove Private Application= -Yes, remove it= +Remove Private Application=Удалить частное приложение +Yes, remove it=Да, удалить ; App Pinning -Click to pin this application= -Click to unpin this application= +Click to pin this application=Нажмите, чтобы закрепить это приложение +Click to unpin this application=Нажмите, чтобы открепить это приложение +Pin App=Закрепить приложение +Unpin App=Открепить приложение ; Branch installations -Choose A Branch To Install= +Choose A Branch To Install=Выберите ветку для установки ; Multiple application installs ; no apps selected -Install Selected Applications= +Install Selected Applications=Установить выбранные приложения -Yes, install it= +Yes, install it=Да, установить ; Multi-install popup -Yes, install them= +Yes, install them=Да, установить их Cookies not enabled Plugins must be separately installed from docker applications= Docker applications will be installed utilizing the most recently saved template with no user input on your part= -Updating Support Links= -Finished Installing If the DONE button did not appear, then you will need to click the red X in the top right corner= +Updating Support Links=Обновление ссылок поддержки +Downloading docker icons= +Finished Installing If the DONE button did not appear, then you will need to click the red X in the top right corner=Установка завершена. Если кнопка ГОТОВО не появилась, вам нужно будет нажать красный крестик в правом верхнем углу. ; error messages No data was returned It is probable that another browser session has rebooted your server Reloading this browser tab will probably fix this error= @@ -87,112 +127,122 @@ Unknown error happened Please post a screenshot in the support thread of the Sta Something really wrong happened Reloading the Apps tab will probably fix the problem= This plugin has a duplicated name from another plugin %s This will impact your ability to install both plugins simultaneously= You have been logged out= +Fatal Flash Drive Error= +This usually means your flash drive is corrupted or has dropped offline The rest of the Unraid GUI will also be affected Post a new thread in the Unraid forums if this error continues= +Fatal Docker Image Error= +Your docker image or folder is either read-only or completely full Issues will result because of this You should create a new post in the Unraid forums and include your diagnostics= +This template is set up to use a custom network You may have to adjust the network or IP address etc to match your system= +One or more ports used by this application are already in use by another service or app running on your server You will need to adjust the host ports accordingly on the template= ; CA Sections Keep the length reasonable -MENU= -Installed Apps= -Previous Apps= -Pinned Apps= -CATEGORIES= -New Apps= -Updated Apps= -Random Apps= -Top New Installs= -Trending Apps= -All Apps= -OTHER= -Statistics= -Credits= -Support= -VERSION= -Change Log= +Home=На главную +Installed Apps=Установленные приложения +Previous Apps=Предыдущие приложения +Pinned Apps=Закрепленные приложения +Favourite Repo=Избранный репозиторий +Action Centre=Центр действий +Recently Added=Недавно добавленные +Random Apps=Случайные приложения +Top New Installs=Топ новых установок +Top Trending Apps=Самые популярные приложения +Spotlight Apps=Приложения в центре внимания +All Apps=Все приложения +Statistics=Статистика +Credits=Авторы +Support=Служба поддержки +VERSION=ВЕРСИЯ +Change Log=Журнал изменений +Debugging=Отладка ; Credits -Development= -Additional Contributions= -GUI Layout Design= -Application Feed= -Additional Testing= -Moderation= -Additional Libraries= -Copyright= -Translation= +Development=Разработка +Additional Contributions=Дополнительный вклад +GUI Layout Design=Дизайн макета графического интерфейса +Application Feed=Лента приложений +Additional Testing=Дополнительное тестирование +Moderation=Модерация +Additional Libraries=Дополнительные библиотеки +Copyright=Авторские права +Translation=Перевод ; Statistics page -Deprecated Applications are able to still be installed if you have previously had them installed New installations of these applications are blocked unless you enable Display Deprecated Applications within CAs General Settings= -The following applications are blacklisted CA will never allow you to install or reinstall these applications= -While highly not recommended to do, incompatible applications can be installed by enabling Display Incompatible Applications within CAs General Settings= -This display is informational ONLY= -unknown= -Last Change To Application Feed= -Number Of Docker Applications= -Number Of Plugin Applications= -Number Of Templates= -Number Of Repositories= -Number Of Private Docker Applications= -Number Of Invalid Templates= -Number Of Template Errors= -Number Of Blacklisted Apps= -Number Of Incompatible Applications= -Number Of Deprecated Applications= -Number Of Moderation Entries= -Primary Server= -Backup Server= - -; Statistics Popup Titles -Repository List= -All Invalid Templates Found= -Template Errors= -All Moderation Entries= + +unknown=неизвестно +Last Change To Application Feed=Последнее изменение в фиде приложений +Docker Applications= +Plugin Applications=Приложения-плагины +Templates=Шаблоны +Official Containers=Официальные контейнеры +Repositories=Репозитории +Private Docker Applications= +Invalid Templates=Недействительные шаблоны +Template Errors=Шаблоны с ошибками +Blacklisted Apps=Заблокированные приложения +Incompatible Applications=Несовместимые приложения +Deprecated Applications=Устаревшие приложения +Moderation Entries=Записи модерации +Primary Server=Основной сервер +Backup Server=Резервный сервер +Installs not allowed from this page=Установка с этой страницы запрещена ; Statistics Popup -No invalid templates found= +No invalid templates found=Недействительные шаблоны не найдены These templates are invalid and the application they are referring to is unknown= -No templates were automatically fixed= -All of these errors found have been fixed automatically= -Note that many of these errors can be avoided by following the directions= -HERE= -The following plugins have duplicated filenames and are not able to be installed simultaneously= +No templates were automatically fixed=Никакие шаблоны не были автоматически исправлены +All of these errors found have been fixed automatically=Все обнаруженные ошибки были исправлены автоматически +Note that many of these errors can be avoided by following the directions=Обратите внимание, что многих из этих ошибок можно избежать, следуя инструкциям +HERE=ЗДЕСЬ +The following plugins have duplicated filenames and are not able to be installed simultaneously=Следующие плагины имеют повторяющиеся имена файлов и не могут быть установлены одновременно The following docker applications refer to the same docker repository but may have subtle changes in the template to warrant this= -If any of these entries are incorrect then contact the moderators of CA to discuss= -Global Repository Comments= -Applied to all applications=(Applied to all applications) +If any of these entries are incorrect then contact the moderators of CA to discuss=Если какие-либо из этих записей неверны, свяжитесь с модераторами ПС для обсуждения +Global Repository Comments=Комментарии к глобальному репозиторию +Applied to all applications=(Применяется ко всем приложениям) Individual Application Moderation= ; Misc -Community Applications Changelog= +Community Applications Changelog=Журнал изменений приложений сообщества + +Each month we highlight some of the amazing work from our community=Каждый месяц мы выделяем некоторые удивительные работы нашего сообщества +Check out these newly added applications from our awesome community=Ознакомьтесь с этими недавно добавленными приложениями от нашего замечательного сообщества +Check out these up and coming apps=Ознакомьтесь с этими перспективными приложениями +These apps have the highest percentage of new installs=Эти приложения имеют самый высокий процент новых установок +An assortment of randomly chosen apps=Набор случайно выбранных приложений ; Categories try not to be excessively long This is displayed on the left of CA screen -Backup= -Cloud= -Downloaders= -Game Servers= -Home Automation= -Media Applications= -Books= -Music= -Photos= -Video= -Other= -Media Servers= -Network Services= +Backup=Резервное копирование +Cloud=Облако +Crypto Currency=Криптовалюта +Downloaders=Загрузчики +Drivers=Драйверы +Game Servers=Игровые серверы +Home Automation=Домашняя автоматизация +Media Applications=Медиа-приложения +Books=Книги +Music=Музыка +Photos=Фото +Video=Видео +Other=Прочее +Media Servers=Медиа-серверы +Network Services=Сетевые службы DNS= FTP= -Management= -Messenger= -Proxy= +Management=Управление +Messenger=Мессенджер +Proxy=Прокси VOIP= VPN= Web= -Productivity= -Security= -Tools Utilities=Tools / Utilities -System= -Themes= -Utilities= -Private Apps= -Uncategorized= +Privacy= +Productivity=Продуктивность +Security=Безопасность +Spotlight= +Tools Utilities=Инструменты / Утилиты +System=Система +Themes=Темы +Utilities=Утилиты +Private Apps=Частные приложения +Uncategorized=Без категории ; Categories displayed within a popup or on the card. Where an entry exists after the "=" it is not translated, but rather how it should look GameServers= @@ -216,125 +266,153 @@ NetworkManagement=Network:Management NetworkProxy=Network:Proxy NetworkVOIP=Network:VOIP NetworkVPN=Network:VPN +NetworkPrivacy=Network:Privacy NetworkWeb=Network:Web NetworkOther=Network:Other ToolsSystem=Tools:System ToolsThemes=Tools:Themes ToolsUtilities=Tools:Utilities -Other= OtherUncategorized=Other:Uncategorized -and %s more= +and %s more=и ещё %s ; App Popup Related -Donate To Author= -Donate To Maintainer= -Author= -Maintainer= +This application template has been blacklisted=Это приложение/шаблон занесён в чёрный список +This application template has been deprecated=Это приложение/шаблон устарело +This application has additional requirements=Это приложение имеет дополнительные требования +Additional Requirements=Дополнительные требования +Donate To Author=Пожертвовать автору +Donate To Maintainer=Пожертвовать сопровождающему +CLOSE=ЗАКРЫТЬ +Author=Автор +Maintainer=Сопровождающий DockerHub= -Application Template= -Base OS= +Application Template=Шаблон приложения DockerHub Stars= -Added to CA= -Date Updated= -Current Version= -Minimum OS= -Max OS= -Total Downloads= -Licence= -30 Day Trend= -Ranked #%s= +Added to CA=Дата добавления +Date Updated=Дата обновления +Current Version=Текущая версия +Min OS=Мин. ОС +Max OS=Макс. ОС +Total Downloads=Всего скачиваний +Licence=Лицензия +Ranked #%s=Рейтинг #%s ; as in Trending up or down arrow -Trending %s= +Trending %s=В тренде %s ; as in As of some date -As of %s=(As of %s) -This application template has been blacklisted=This application / template has been blacklisted -This application template has been deprecated=This application / template has been deprecated -This application is not compatible with your version of Unraid= -Another browser tab or device has updated the displayed templates Some actions are not available=Another browser tab or device has updated the displayed templates. Some actions are not available -Reinstall default=Reinstall (default) +As of %s=(По состоянию на %s) +Play Video=Проиграть видео +Play Video %s=Проиграть видео %s +This application is not compatible with your version of Unraid=Это приложение несовместимо с вашей версией Unraid +Another browser tab or device has updated the displayed templates Some actions are not available=Другая вкладка браузера или устройство обновили отображаемые шаблоны. Некоторые действия недоступны WebUI= -Reinstall= -Install= -Project= +Reinstall=Переустановить +Reinstall From Previous Apps= +Install=Установить +Uninstall=Удалить +Project=Проект +Read Me First=Сначала прочитай меня +Install second instance=Установить второй экземпляр Install Using The Templates Default Tag=Install Using The Template's Default Tag -Moderator Comments=Moderator Comments: -Note not all authors keep up to date on change logs= -Note not all maintainers keep up to date on change logs= +Moderator Comments=Комментарии модератора: +Note not all authors keep up to date on change logs=Обратите внимание, что не все авторы следят за обновлениями журналов. +Note not all maintainers keep up to date on change logs=Обратите внимание, что не все сопровождающие обновляют журналы изменений. +Last Update=Последнее обновление +Note All statistics are only gathered every 30 days=Примечание: вся статистика собирается каждые 30 дней. ;the following if using a space you MUST use nbsp but keep it down to one word if at all possible -Donate= -Currently Installed Version= -Install The Update= +Donate=Пожертвовать +Currently Installed Version=Текущая установленная версия +Install The Update=Установить обновление ; as in you have the latest version already installed -Latest Version= -Multi Language Support= +Latest Version=Последняя версия +Multi Language Support=Поддержка нескольких языков +Support Forum=Форум поддержки ; as in more than 100000 -More than %s= +More than %s=Более %s +Remove from Previous Apps=Удалить из предыдущих приложений +Remove=Удалить +See All Apps=Посмотреть все приложения +Favourite=Избранное +Application Type=Тип приложения ; Graphs -Trend Per Month= -Downloads Per Month= -Total Downloads= +Trend Per Month=Тенденция за месяц +Downloads Per Month=Загрузок в месяц ; Multi install script Installing docker applications %s= -Starting %s= +Starting %s=Запуск %s %s failed to start You should install it by itself to fix the errors= -Setting installed applications to autostart= +Setting installed applications to autostart=Настройка автозапуска установленных приложений Docker Application Installation finished= ; Application Cards -Private dockerHub Conversion=Private (dockerHub Conversion) -Go to the project page= -Go to the support thread= -Uninstall Application= -Remove Private Application= -Remove Application From List= -Check off to select multiple reinstalls= -Go to the plugin settings= -Click to reinstall the application using default values= -Click to edit the application values= -Click to reinstall= -Click to install= -Install plugin= -Click to go to the WebUI= -This application has been marked as being Beta= -This application template has been deprecated= -This application is not compatible with your version of Unraid= -This application template has been blacklisted= -Search for more applications from %s= -Click for more information= - -; Dockerhub searches -Search For Containers From %s= -Search for similar containers= +Actions=Действия +This application is a driver plugin=Это приложение является драйвером (плагином) +This is a language pack=Это пакет локализации +This application is a docker container= +This application is a plugin=Это приложение является плагином +This is a spotlight application= +This is your favourite repository= +This application is from your favourite repository= +This application is pinned for later viewing= +Private Application=Частное приложение +Remove Application From List=Удалить приложение из списка +Check off to select multiple reinstalls=Установите флажок, чтобы выбрать несколько переустановок +Go to the plugin settings=Перейти к настройкам плагина +Click to reinstall the application using default values=Нажмите, чтобы переустановить приложение со значениями по умолчанию +Click to edit the application values=Нажмите, чтобы изменить значения приложения +Click to reinstall=Нажмите, чтобы переустановить +Click to install=Нажмите, чтобы установить +Click to go to the WebUI=Нажмите, чтобы перейти к веб-интерфейсу +This application template has been deprecated=Этот шаблон приложения устарел +This application template has been blacklisted=Этот шаблон приложения внесён в чёрный список +Click info to see the notes regarding this application= +This application has additional requirements=Это приложение имеет дополнительные требования +BETA=БЕТА +INSTALLED=УСТАНОВЛЕН +OFFICIAL=ОФИЦИАЛЬНО +UPDATED=ОБНОВЛЕНИЕ +This is an official container=Это официальный контейнер +Digitally Signed=Цифровая подпись +This container is digitally signed=Этот контейнер подписан цифровой подписью +Docker Hub= +NOTE You must visit the dockerHub page to gather the information required to install correctly= +Show CA templates= +Deprecated=Устарело +Incompatible=Несовместимо +Blacklisted=В чёрном списке +Template Exists=Шаблон существует +Template already exists in Apps=Шаблон уже существует в приложениях +; eg: LinuxServer Repository +%s Repository= +; eg: Squid's Repository +%s's Repository= + +Info=Информация +Attention=Внимание +Repository=Репозиторий +Why we picked it=Почему мы выбрали это +Application Spotlight %s=Приложение в центре внимания %s +Unraid Staff=Сотрудники Unraid ; Page Navigation -Displaying %s - %s of %s=Displaying %1$s - %2$s (of %3$s) - -Updating Content= -Language= -Switch to this language= -Country Code= -Install Language Pack= -Remove Language Pack= -Update Language Pack= -Installed Version= -A note about translations= -Click here to view the language changelog= - -; Help Text -This chooses how to sort the results= -These icons respectively will Install or Edit an application= -Clicking these icons will take you to an applications GUI or settings=Clicking these icons will take you to an application's GUI or settings -This will update an application= -This will take you to the appropriate support thread for an application= -This will immediately switch to the language= -This will take you to the project page for an application= -Clicking this icon will uninstall the application or delete it from the lists depending upon your current section= -Clicking these icons will pin or unpin an application for later viewer from the Pinned Apps section= -Clicking this will display more information about the application NOTE You can also click on the applications icon to display more information= -Clicking this will display any warnings or extra comments about the application= -On the previous apps section you can select multiple applications to install simultaneously= -This is the recommended version to install by the application author themselves= -For support for this plugin visit= -To view the policies Community Applications has= +Displaying %s - %s of %s=Показано %1$s - %2$s (из %3$s) + +Updating Content=Обновление содержимого +Language=Язык +Switch to this language=Переключиться на этот язык +Country Code=Код страны +Install Language Pack=Установить языковой пакет +Remove Language Pack=Удалить языковой пакет +Update Language Pack=Обновить языковой пакет +Installed Version=Установленная версия +A note about translations=Примечание о переводах +Click here to view the language changelog=Щелкните здесь, чтобы просмотреть журнал изменений языка +View Missing Translations=Просмотреть отсутствующие переводы + +; dockerHub conversions +Determine configuration= +Would you like CA to attempt to determine any applicable paths, ports, and variables for the template This will entail performing a test installation of the container It will be automatically deleted after processing The container will not be started=Would you like CA to attempt to determine any applicable paths, ports, and variables for the template? This will entail performing a test installation of the container. It will be automatically deleted after processing. The container will not be started. +An error occurred - Could not determine configuration= +; WebGui +Click Install to download and install the Community Applications plugin=Нажмите **Установить**, чтобы загрузить и установить плагин **Community Applications**. \ No newline at end of file diff --git a/Community Apps/ca_settings.txt b/Community Apps/ca_settings.txt index 2d2aad2..615e64f 100644 --- a/Community Apps/ca_settings.txt +++ b/Community Apps/ca_settings.txt @@ -1,14 +1,20 @@ -Hide Deprecated Applications= -This setting hides deprecated applications from the list of available apps Deprecated apps will still however display within the installed and previous apps sections= -Hide Incompatible Applications= -This setting will hide applications that are listed as being incompatible with your version of Unraid= -Enable Reinstall Default= -This option enables another button on the cards and popups which will allow you to reinstall an installed application using its default template values This option can be confusing at times, and is only generally used if you wish to install and have an application running twice simultaneously= -Enable additional search results from dockerHub= -This setting enables CA to retrieve additional search results from dockerHub Note that docker must be enabled for this to be operational= -Allow CA to send any emergency notifications= -This setting allows CA to periodically scan your system and alert you to the presence of= -1 Known malware and security vulnerabilities within applications= -2 Critical security vulnerabilities within Unraid OS= -3 Any installed applications which may seriously hinder the operation of your server= -Support Thread= +Hide Deprecated Applications=Скрыть устаревшие приложения +This setting hides deprecated applications from the list of available apps Deprecated apps will still however display within the installed and previous apps sections=Этот параметр скрывает устаревшие приложения из списка доступных приложений. Устаревшие приложения по-прежнему будут отображаться в разделах установленных и предыдущих приложений. +Hide Incompatible Applications=Скрыть несовместимые приложения +This setting will hide applications that are listed as being incompatible with your version of Unraid=Этот параметр скроет приложения, которые указаны как несовместимые с вашей версией Unraid. +Allow install of second instance=Разрешить установку второго экземпляра +This option enables another button on the cards and popups which will allow you to reinstall an installed application using its default template values This option can be confusing at times, and is only generally used if you wish to install and have an application running twice simultaneously=Этот параметр включает еще одну кнопку на карточках и всплывающих окнах, которые позволят вам переустановить установленное приложение, используя его значения шаблона по умолчанию. Этот параметр может время от времени сбивать с толку и обычно используется только в том случае, если вы хотите установить и запустить приложение дважды одновременно. +Show descriptions on application cards=Показывать описания на карточках приложений +This option dictates whether the descriptions appear on the cards or not=Этот параметр определяет, будут ли описания отображаться на карточках или нет. +Allow CA to check for updates to applications=Разрешить ПС проверять наличие обновлений для приложений +This setting enables CA to check for updates to applications Note that Community Applications will always check for updates to itself=Этот параметр позволяет ПС проверять наличие обновлений для приложений. Обратите внимание, что приложения сообщества всегда будут проверять наличие обновлений для себя. +Allow CA to send any emergency notifications=Разрешить ПС отправлять любые экстренные уведомления +This setting allows CA to periodically scan your system and alert you to the presence of=Этот параметр позволяет ПС периодически сканировать вашу систему и предупреждать вас о наличии +1 Known malware and security vulnerabilities within applications=1 Известных вредоносных программ и уязвимостей безопасности в приложениях +2 Critical security vulnerabilities within Unraid OS=2 Критических уязвимостях в системе безопасности Unraid OS +3 Any installed applications which may seriously hinder the operation of your server=3 Любых установленных приложениях, которые могут серьезно помешать работе вашего сервера. +Save CA debugging information=Сохранить отладочную информацию ПС +Only enable this when advised to from the author of Community Applications=Включайте это только по рекомендации автора приложений сообщества. +Enable developer mode=Включить режим разработчика +This unlocks some extra features within CA generally only used by developers Not recommended to enable=Это разблокирует некоторые дополнительные функции в ПС, которые обычно используются только разработчиками. Не рекомендуется включать +Support Thread=Тема на форуме diff --git a/Community Apps/javascript.ca.txt b/Community Apps/javascript.ca.txt index 156f8a5..96e3836 100644 --- a/Community Apps/javascript.ca.txt +++ b/Community Apps/javascript.ca.txt @@ -1,14 +1,14 @@ -Search for %s= +Search for %s=Поиск %s DockerHub Search for %s= -Are you sure you want to delete %s from the list of previously installed applications= -Are you sure you want to uninstall %s= -Are you sure you want to remove the private application %s by %s= -Removing %s= -Uninstalling %s= -Install %s Selected Application= -Install %s Selected Applications= +Are you sure you want to delete %s from the list of previously installed applications=Вы уверены, что хотите удалить %s из списка ранее установленных приложений +Are you sure you want to uninstall %s=Вы уверены, что хотите удалить %s +Are you sure you want to remove the private application %s by %s=Вы действительно хотите удалить частное приложение %s от %s +Removing %s=Удаление %s +Uninstalling %s=Удаление %s +Install %s Selected Application=Установить %s выбранное приложение +Install %s Selected Applications=Установить %s выбранных приложений Are you sure you want to install %s docker and %s plugin applications= -Install Application= -Install Applications= +Install Application=Установить приложение +Install Applications=Установить приложения Something really wrong went on during %s= -Are you sure you want to delete %s applications from the previously installed list= +Are you sure you want to delete %s applications from the previously installed list=Вы действительно хотите удалить %s приложений из ранее установленного списка diff --git a/Disable Security Mitigations/disablesecurity.txt b/Disable Security Mitigations/disablesecurity.txt new file mode 100644 index 0000000..665595e --- /dev/null +++ b/Disable Security Mitigations/disablesecurity.txt @@ -0,0 +1,11 @@ +Disabling Spectre, Meltdown and Zombieload MDS mitigations may improve your CPU speed But these are security risks for certain workloads, and disabling the mitigations is purely all at your own risk= +Mitigations currently disabled= +Mitigations currently enabled= +Status= +will be updated after rebooting the server= +Enable Mitigations= +Disable Mitigations= +Disable Security Mitigations A Reboot Is Required For Changes To Take Effect= +A Reboot Is Required For Changes To Take Effect= +Mitigations will be enabled after a reboot= +Mitigations will be disabled after a reboot= diff --git a/Dynamix Active Streams/activestreams.txt b/Dynamix Active Streams/activestreams.txt new file mode 100644 index 0000000..0b48664 --- /dev/null +++ b/Dynamix Active Streams/activestreams.txt @@ -0,0 +1,17 @@ +Halt= +Host Address=Адрес хоста +Host=Хост +No active streams=Нет активных потоков +Playtime= +Stop stream=Остановить трансляцию +Stream=Транслировать +User Name=Имя пользователя +User=Пользователь + +:streams_plug: +> Give symbolic names to IP addresses, which are displayed on the active streams page. +> +> New IP addresses are automatically added to the list when detected. +> +> To remove a name association, clear the respective user name box and press apply. +:end diff --git a/Dynamix Auto Fan/fansettings.txt b/Dynamix Auto Fan/fansettings.txt new file mode 100644 index 0000000..f5afee7 --- /dev/null +++ b/Dynamix Auto Fan/fansettings.txt @@ -0,0 +1,10 @@ +Click DETECT=Нажмите ОБНАРУЖИТЬ +Detect=Обнаружить +Exclude drives=Исключить диски +Fan control function=Функция управления вентилятором +High temperature threshold=Порог высокой температуры +Low temperature threshold=Порог низкой температуры +Minimum PWM value=Минимальное значение ШИМ +PWM controller=ШИМ-контроллер +PWM fan=ШИМ вентилятор +Refresh interval=Интервал обновления diff --git a/Dynamix Cache Dirs/folderchacingsettings.txt b/Dynamix Cache Dirs/folderchacingsettings.txt new file mode 100644 index 0000000..a0fb690 --- /dev/null +++ b/Dynamix Cache Dirs/folderchacingsettings.txt @@ -0,0 +1,142 @@ +Adaptive= +Cache pressure of directories on system= +Check HELP for filter example= +Disk Idle Timer= +Excluded folders=Исключённые папки +Folder caching function=Функция кэширования папок +for adaptive depth=для адаптивной глубины +Important - check HELP if disks spin up= +Included folders=Включённые папки +Limit the memory available to the shell in which the script runs increase if it dies=Limit the memory available to the shell in which the script runs (increase if it dies) +Logging=Ведение журнала +Maximum interval between folder scans=Максимальный интервал между сканированием папок +Maximum level depth=Максимальная глубина уровня +Minimum interval between folder scans=Минимальный интервал между сканированием папок +Minimum level depth=Минимальная глубина уровня +or see= +Run scan of each disk in a separate thread= +Scan timeout for a scan during disk-idle period= +Scan timeout for a scan during initial startup or less-idle period= +Scan timeout for a scan when all directories have been succesfully cached= +Scan user shares mntuser=Scan user shares (/mnt/user) +Suspend during Mover process=Suspend during 'Mover' process +unlimited= +Unraid forum=Форум Unraid +Use Adaptive depth= +User defined options= + +:cachedirs_info_plug: +> Folder Caching Info +> +> The folder caching (cache_dirs) reads directories continously to keep them in memory. +> The program does not know whether a directory is already in memory or need to be reread from disk. +> Therefore it cannot avoid spinning up disks when it happens that the linux memory cache evicts a directory and cache_dirs rescans the directoy. +> If a large number of files are being kept in memory then it seems inevitably that some diretories get evicted from the cache when the system is under load. +> +> The program by default uses an adaptive mode where it reduces the depth of the directory structure which it tries to keep in memory. +> When it detects a cache-miss (slow scan time) it will reduce the depth until disks are idle again, +> but will still be at risk of putting load on the disks for a minute or two until the program gives up and waits for idle disks. +> The less files the cache needs to hold, the less likely it is that the program spins up disks. +:end + +:cachedirs_function_plug: +> Select whether folder caching is enabled or disabled. Caching will only effectively occur when the array is started. +> The caching function is automatically restarted or stopped when the array goes online or offline. +:end + +:cachedirs_pressure_plug: +> Set cache_pressure to NN (default = 10). A value of 0 means never reclaim cache. +> +> A value of 1 works great for many users. If your disks spin up or cache_dirs logging indicates it frequently has accessed disks after scan, try lowering cache-pressure to 1. If the system runs out of memory increase cache-pressure. +> +> If CPU and disks is heavily affected by cache_dirs on frequent intervals this is also an indication that cache_dirs has to rescan everything. +> +> Warning: a value of 0 will cause kernel never to release the memory of directories, and if too little memory is available, +> it will cause the system to crash. cache_dirs does not reset the cachePressure after quitting, +> to reset the cache-pressure execute 'sudo sysctl vm.vfs_cache_pressure=100', or run cache-dirs with cache_pressure 100. +> +> See 'vfs_cache_pressure' in [kernel.org](https://www.kernel.org/doc/Documentation/sysctl/vm.txt). +:end + +:cachedirs_suspend_plug: +> Stop caching while the mover is running to avoid conflicts. When using adaptive depth it will probably work well NO. +> With fixed depth it will almost certainly put less load on the disks to choose YES. +:end + +:cachedirs_included_folders_plug: +> The dropdown menu shows all available folders, by default all folders are included. Select here the restricted list of folders to be included. +> +> If an included folder is excluded, then the folder gets excluded. It is simplest to not use includes and excludes at the same time. +:end + +:cachedirs_excluded_folders_plug: +> The dropdown menu shows all available folders, by default no folders are excluded. Select here any folders to be excluded. +> +> It is possible to exclude an included folder. It is simplest to not use includes and excludes at the same time. +:end + +:cachedirs_adaptive_depth_plug: +> If adaptive is enabled the depth will be automatically adjusted but will never exceed max level depth. +> It will start at depth 1 and keep increasing the scan depth towards maximum level as long as scans do not take too long to complete (see scan timeout). +> If adaptive is disabled then cache_dirs will always scan to the max level. +:end + +:cachedirs_min_level_plug: +> Sets the minimum folder level for the adaptive scan (user-share > child folder > grand child is two levels). Default is 4. +:end + +:cachedirs_max_level_plug: +> Sets the maximum folder levels for the scan (parent > child folder > grand child). Set to 'unlimited' (or 0) to remove maximum +:end + +:cachedirs_idle_timer_plug: +> When the disks have been idle this long, cache_dirs adaptive scan starts working towards building the cache. +:end + +:cachedirs_timeout_scan_plug: +> Scan timeout is the maximum duration that a single scan through all directories at the current level af depth (which may change adaptively). +> Increase it if cache_dirs fails in caching all your files. This timeout is always used if adaptive is disabled. +:end + +:cachedirs_timeout_initial_plug: +> Increase it if you want cache_dirs too give more time in initial scan, and when filesystem may be busy. +:end + +:cachedirs_timeout_cached_plug: +> Decrease it if you want cache_dirs to put less load on system when cache is evicted from memory, and disks are not idle. +> Increase if you want cache_dirs to have a greater chance af getting directories back into memory. +:end + +:cachedirs_min_interval_plug: +> Tweaking of the caching interval can be done for slower systems. Default value is 1 second, should be alright for most systems. +:end + +:cachedirs_max_interval_plug: +> Tweaking of the caching interval can be done for slower systems. Default value is 10 seconds, should be alright for most systems. +:end + +:cachedirs_scan_disk_plug: +> Each disk will be scanned in a separate thread, so the disks will be read concurrently. If user share is also scanned the user +> share will be scanned in a single thread after all disks scans are completed, to avoid thrashing disks. +:end + +:cachedirs_limit_memory_plug: +> set ulimit to NN to limit memory used by script (default=50000), '-U 0' sets no ulimit at all and inherits the shells default). +:end + +:cachedirs_logging_plug: +> Select whether logging is enabled or disabled. Logging will be made to /var/log/cache_dirs.log and /var/log/cache_dirs_lost_cache.csv. +> Be wary that the cache_dirs logs are placed in memory on unRAID and are not automatically rolled. +:end + +:cachedirs_user_defined_plug: +> The cache_dirs script has additional options which may be used. +> Refer to the online documentation to use these as needed, +> or see the cache_dirs script itself located under /usr/local/emhttp/plugins/dynamix.cache.dirs/scripts/cache_dirs +> +> Its possible to tell cache_dirs to avoid traversing all directories with a certain name. The following example avoids '.Recycle.Bin' and 'temp' and 'log' folders: +> +> -a '-noleaf -name .Recycle.Bin -prune -o -name log -prune -o -name temp -prune -o -print' +> +> Note that the single quotes around argument to -a is important. Double-quotes do not work in the current version, so unfortunately its not currently possible to filter with '-name "*Old" -prune'. +:end diff --git a/Dynamix Date Time/datetime.txt b/Dynamix Date Time/datetime.txt new file mode 100644 index 0000000..43f813c --- /dev/null +++ b/Dynamix Date Time/datetime.txt @@ -0,0 +1,41 @@ +Current date and time=Текущая дата и время +Hide map=Скрыть карту +New date and time=Новая дата и время +NTP server=NTP сервер +Show map=Показать карту +Time zone=Часовой пояс +Use NTP=Использовать NTP + +:timezone_plug: +> Выберите подходящий часовой пояс из раскрывающегося списка. +:end + +:datetime_map_plug: +> На карте мира отображается выбранный часовой пояс. +> +> Используйте мышь, чтобы перемещаться по карте, и нажмите на страну, для которой вы хотите установить часовой пояс. Соответствующая зона автоматически выбирается в раскрывающемся списке. +:end + +:use_ntp_plug: +> Выберите **Да**, чтобы использовать протокол сетевого времени (NTP), чтобы время на сервере было точным. +> Мы **настоятельно** рекомендуем использовать сетевой сервер времени, особенно если вы планируете использовать Active Directory. +:end + +:ntp_server1_plug: +> Основной NTP-сервер, который следует использовать. Введите полное доменное имя или IP-адрес. +:end + +:ntp_server2_plug: +> Альтернативный NTP-сервер, который следует использовать, если NTP-сервер 1 недоступен. +:end + +:ntp_server3_plug: +> Альтернативный NTP-сервер, который следует использовать, если NTP-серверы 1 и 2 недоступны. +:end + +:ntp_server4_plug: +> Альтернативный NTP-сервер, который следует использовать, если NTP-серверы 1, 2 и 3 недоступны. +:end +:current_time_plug: +> Введите текущее время. Используйте формат ГГГГ-ММ-ДД ЧЧ:ММ:СС. Неактивно при использовании NTP. +:end diff --git a/Dynamix Day Night/daynightssettings.txt b/Dynamix Day Night/daynightssettings.txt new file mode 100644 index 0000000..4cc2c72 --- /dev/null +++ b/Dynamix Day Night/daynightssettings.txt @@ -0,0 +1,31 @@ +Automatic theming=Автоматическая Тематизация +Bing API key=Ключ API Bing +Bing= +City name=Название города +Country name=Имя страны +Day theme=Дневаная тема +Geocoding service=Сервис геокодирования +Google API key=Ключ Google API +Google= +MapQuest API key=Ключ API MapQuest +MapQuest= +Night theme=Ночная тема +No geographical coordinates found for the given address=Для данного адреса не найдены географические координаты +Please adjust=Пожалуйста, отрегулируйте +Postal code=Почтовый индекс +See=Посетите +Street address=Адрес улицы +this site=этот сайт +to obtain a Bing API key=чтобы получить ключ API Bing +to obtain a Google API key=чтобы получить ключ API Google +to obtain a MapQuest API key=чтобы получить ключ API MapQuest + +:day_night_plug: +> Введите адресную информацию (улица, город, страна), которая используется для расчета времени восхода и захода солнца в вашем местоположении. +> +> Служба геокодирования используется для преобразования вашего адреса в географические координаты (широта и долгота).
+> Вам необходимо зарегистрироваться в одной из доступных служб и получить уникальный ключ API, чтобы использовать их службу. +> +> **Дневная** тема выбирается между восходом и закатом.
+> **Ночная** тема выбирается между закатом и восходом солнца. +:end diff --git a/Dynamix Day Night/daynightssettings1.txt b/Dynamix Day Night/daynightssettings1.txt new file mode 100644 index 0000000..4cc2c72 --- /dev/null +++ b/Dynamix Day Night/daynightssettings1.txt @@ -0,0 +1,31 @@ +Automatic theming=Автоматическая Тематизация +Bing API key=Ключ API Bing +Bing= +City name=Название города +Country name=Имя страны +Day theme=Дневаная тема +Geocoding service=Сервис геокодирования +Google API key=Ключ Google API +Google= +MapQuest API key=Ключ API MapQuest +MapQuest= +Night theme=Ночная тема +No geographical coordinates found for the given address=Для данного адреса не найдены географические координаты +Please adjust=Пожалуйста, отрегулируйте +Postal code=Почтовый индекс +See=Посетите +Street address=Адрес улицы +this site=этот сайт +to obtain a Bing API key=чтобы получить ключ API Bing +to obtain a Google API key=чтобы получить ключ API Google +to obtain a MapQuest API key=чтобы получить ключ API MapQuest + +:day_night_plug: +> Введите адресную информацию (улица, город, страна), которая используется для расчета времени восхода и захода солнца в вашем местоположении. +> +> Служба геокодирования используется для преобразования вашего адреса в географические координаты (широта и долгота).
+> Вам необходимо зарегистрироваться в одной из доступных служб и получить уникальный ключ API, чтобы использовать их службу. +> +> **Дневная** тема выбирается между восходом и закатом.
+> **Ночная** тема выбирается между закатом и восходом солнца. +:end diff --git a/Dynamix File Integrity/fileintegrity.txt b/Dynamix File Integrity/fileintegrity.txt new file mode 100644 index 0000000..79f2709 --- /dev/null +++ b/Dynamix File Integrity/fileintegrity.txt @@ -0,0 +1,134 @@ +Apple metadata= +Array must be Started to use this feature=Array must be **Started** to use this feature +Automatically protect new and modified files= +BLAKE2= +Build= +Continue= +Corz= +Custom files= +Custom folders= +Day of the month= +Day of the week= +Disk selection= +Disk verification schedule= +Dont start=Don't start +Download Now= +Dynamix File Integrity= +Error logging= +Excluded files= +Excluded folders and files= +Excluded folders= +File Duplicates Check= +Find= +Generate Corz Files= +hash files= +Hashing method= +Header menu= +HHMM=HH:MM +Import= +Include duplicate file hashes in Find command=Include duplicate file hashes in **Find** command +log files= +Low= +MD5= +Output file= +Placement of file integrity control= +Process priority= +Save new hashing results to flash= +saved files= +Send notifications= +SHA2= +Syslog only= +Syslog Output file=Syslog & Output file +Task= +Time of the day= +Toggle all= +Tools menu= +Verification tasks= +view hash files= +view log files= +view saved files= +When parity operation is running= + +:integrity_control_plug: +> Select the placement of the file integrity control page. By default it is placed under the *Tools* menu, but it may be moved under the *header* menu. +> +> Keep in mind that the *header* menu has limited space. +:end + +:integrity_service_plug: +> When enabled a checksum value is automatically calculated and added to the extended attributes of the newly created or modified file. +> When it is detected that a file change has occured, but its modification time hasn't changed, then an automatic checksum verification is performed to check for any silent file corruption. +> +> The area selection can be filtered by excluding folders (shares) and/or excluding disks all together (see table below). +> +> When the automatic hashing is disabled then manual control is required to keep information up-to-date. +:end + +:integrity_hashing_plug: +> Select the preferred hashing method. SHA2 generates a 256 bits checksum value, MD5 generates a 128 bits checksum value, while BLAKE2 generates a 512 bits checksum value per file. +> +> MD5 is the most commonly used method and should be selected when compatibility with external programs is required, BLAKE2 is the fastest method and has the highest detection grade, this is a proprietary solution though. +> SHA2 is the official standard and is selected by default. It is the slowest of all three methods though. The BLAKE2 option is disabled if it is not supported by your processor. +> All methods require substantial computing power from the processor and a too weak processor may not be able to perform up to expectations. +:end + +:integrity_flash_plug: +> When enabled a daily file on the flash device will be created, holding the checksum results for all newly or modified files of that particular day. +> The format of this file is the same as the standard export file. The daily file is saved as */config/plugins/dynamix.file.integrity/saved/disks.export.<date>.new.hash* +:end + +:integrity_exluded_plug: +> Select here any folders (shares) you want to exclude from the automatic hashing and verification functionality. A share existing on multiple disks will be skipped on any disk where it is present. +> +> Use **Custom folders / Custom files** to manually enter exclusions. Multiple exclusions are separated by a comma.
+> Examples are folder names, e.g. **`.Recycle.Bin`**, file names, e.g. **`my_workfile.tmp`** or file extensions, e.g. **`*.tmp`**. +> +> Select **Apple metadata** to exclude metadata files created by Apple's netatalk (.AppleDB and .DS_Store). +:end + +:integrity_verification_plug: +> When enabled a cron schedule is created to do file verification in the background. You need to select which disks participate in the automatic hashing and verification process (see table below). +> The cron schedule can run on a selectable daily, weekly or monthly basis. +> +> One or more tasks can be created, each containing one or more disks. All disks under the same task are verified in parallel. This decreases the total run-time, but increases the +> processor load. Make sure your processor can handle this load, and change grouping accordingly. At one end all disks can be put in a single task, resulting in the highest concurrency. +> At the other end every disk can be put in its own task, resulting in the lowest processor load. +> +> A disk with a disabled checksum box and a red background, indicates a background verification process is currently in progress for this disk. It can not be stopped. +> +> When multiple tasks exist then each task is executed in the next schedule in a rotating fashion. E.g. when you have set up a weekly schedule with 3 tasks then every week +> another task is executed and after 3 weeks the verification function has done all selected disks. +> +> When the verification schedule is disabled then manual control is required to verify the correctness of the files. +:end + +:integrity_priority_plug: +> Background processes can be run in either normal or low priority mode. +:end + +:integrity_parity_plug: +> Before a verification task starts it can either continue as usual when a parity operation is running, or the verification task doesn't start at all. +> In the latter case you need to wait for the next scheduled time to execute the task. +:end + +:integrity_day_of_the_week_plug: +> When a weekly schedule is chosen, then select here the day of execution. +:end + +:integrity_day_of_the_month_plug: +> When a monthly schedule is chosen, then select here the date of execution. +:end + +:integrity_time_of_the_day_plug: +> Select the hour and minute at which time the scheduled task will be executed. Granularity is 5 minutes. +:end + +:integrity_notifications_plug: +> Set to YES if you want to receive notifications when file corruption is detected. +> See the notification settings on how to set up and receive "alert" notifications. +:end + +:integrity_logging_plug: +> Error logging, including file corruption detection information can be given in the system log, or saved as a file on flash. +> Disabling error logging will suppress log creation, but it is still possible to receive notifications. +:end diff --git a/Dynamix File Integrity/integrity.txt b/Dynamix File Integrity/integrity.txt new file mode 100644 index 0000000..13c1bca --- /dev/null +++ b/Dynamix File Integrity/integrity.txt @@ -0,0 +1,5 @@ +Aborted - export file not found= +Import= +Build up-to-date= +Export up-to-date= +Operation aborted= diff --git a/Dynamix Local Master/smb.txt b/Dynamix Local Master/smb.txt new file mode 100644 index 0000000..0bd2586 --- /dev/null +++ b/Dynamix Local Master/smb.txt @@ -0,0 +1,24 @@ +Current elected master= +is current local master browser= +Local master= +Monitor local master election= +please wait, obtaining= +Workgroup= + +:smb_workgroup_plug: +> Enter your local network Workgroup name. Usually this is "WORKGROUP". +:end + +:smb_master_plug: +> If set to 'Yes' then the server will fully participate in browser elections, and in the absense +> of other servers, will usually become the local Master Browser. +:end + +:smb_master_election_plug: +> Enable or disable background monitoring of the local master election. +> The result of the monitoring is displayed in the header at the top-right position. +:end + +:smb_master_current_plug: +> Shows in real-time the current elected local master browser. +:end diff --git a/Dynamix S3 Sleep/sleepsettings.txt b/Dynamix S3 Sleep/sleepsettings.txt new file mode 100644 index 0000000..6b56806 --- /dev/null +++ b/Dynamix S3 Sleep/sleepsettings.txt @@ -0,0 +1,117 @@ +Console= +Counters only= +Custom commands after wake-up= +Custom commands before sleep= +Device activity monitoring= +DHCP renewal after wake-up= +Enable DEBUG mode= +Enter custom commands here= +Ethernet interface= +Excluded days= +Excluded hours= +Execute function= +Extra delay after array inactivity= +Force gigabit speed after wake-up= +High traffic= +IP address= +Local Remote=Local & Remote +Local= +Log will be stored in bootlogss3_sleeplog=Log will be stored in **/boot/logs/s3_sleep.log** +Low traffic= +Medium traffic= +Mega traffic= +Monitor disks outside array= +Network idle threshold= +no host= +Remote= +Set WOL options before sleep= +Silent traffic= +Status counters=Status & counters +Status only= +Syslog and flash= +Syslog= +Wait for array inactivity= +Wait for host inactivity= +Wait for network inactivity= +Wait for user login inactivity= +Yes, exclude Cache= + +:s3sleep_function_plug: +> Select the mode of operation. The system can be either put to sleep (and wake-up) or completely shutdown. +> +> The next settings determine the conditions under which the system will be put to sleep or shutdown. +:end + +:s3sleep_excluded_days_plug: +> By default all days are included, select here the days that sleep or shutdown is not effective. This setting works in combination with excluded hours. +:end + +:s3sleep_excluded_hours_plug: +> By default all hours are included, select here the hours that sleep or shutdown is not effective. This setting works in combination with excluded days. +:end + +:s3sleep_inactivity_plug: +> Select whether the array must be completely inactive (all disks are spun down) before sleep or shutdown can take place. +> +> The Cache disk can be included or excluded in this setting, e.g. when the Cache disk is used continuously and never spins down. +:end + +:s3sleep_activity_plug: +> *Status* monitors the hardware status of the device +> +> *Counters* monitors the read/write counters of the device +:end + +:s3sleep_outside_plug: +> If there any other disks present outside the array, then these can be monitored separately. +:end + +:s3sleep_extra_delay_plug: +> Specify an additional delay after the array has become inactive. Value may be 0 for no delay. +:end + +:s3sleep_network_plug: +> Select whether network activity must be taken as a condition before going to sleep or shutdown. +:end + +:s3sleep_ethernet_plug: +> In case of multiple network interfaces, select here the interface to use for checking the network activity. +:end + +:s3sleep_idle_plug: +> Network activity is measured under different thresholds. Ranging from completely silent to megabit traffic. Experiment with this setting to find to right balance for your situation. +:end + +:s3sleep_host_plug: +> Select whether external hosts need to be monitored and non-responding as a sleep or shutdown condition. +> +> External hosts are given by their IP address, use a comma to separate multiple IP addresses. As long as one of the external hosts responds to a ping then sleep/shutdown won't be invoked. +:end + +:s3sleep_login_plug: +> Select whether local (console) or remote (telnet or ssh) logged in users need to log out first before sleep or shutdown can proceed. +:end + +:s3sleep_wol_plug: +> Set additional WOL options for proper support of S3 sleep. Refer to your system documentation for possibilities. +:end + +:s3sleep_before_plug: +> Any extra commands before sleep or shutdown is invoked can be placed here. This maybe cleanup or other desirable actions. +:end + +:s3sleep_after_plug: +> Any extra commands after wake-up of sleep can be placed here. This might be helpful for restoring a previous situation. +:end + +:s3sleep_gigabit_plug: +> Leave this default OFF, in case the interface doesn't start properly after wake-up, see if forcing this setting helps. +:end + +:s3sleep_dhcp_plug: +> Leave this default OFF, in case the system doesn't start properly after wake-up, see if forcing this setting helps. +:end + +:s3sleep_debug_plug: +> By default debug is OFF. Use this setting only in case of troubleshooting, it will generate additional messages to report the various stages within the s3_sleep script. +:end diff --git a/Dynamix SSD Trim/scheduler.txt b/Dynamix SSD Trim/scheduler.txt new file mode 100644 index 0000000..36ab3d8 --- /dev/null +++ b/Dynamix SSD Trim/scheduler.txt @@ -0,0 +1,41 @@ +Any= +Daily schedule= +Day Date=Day / Date +Hour= +Hourly schedule= +Minute= +Monthly schedule= +Scheduled Tasks= +Weekly schedule= +Day of the month= +Day of the week= +Every 2 hours= +Every 3 hours= +Every 4 hours= +Every 6 hours= +Every 8 hours= +Every hour= +HHMM=HH:MM +SSD TRIM schedule= +Time of the day= + +:trim_schedule_plug: +> Choose a trim schedule ranging from hourly, daily, weekly and monthly. +> +> The interval determines how often SSD trim will run, it runs in the background. +:end + +:trim_day_of_the_week_plug: +> Choose a day when the weekly schedule is selected. Otherwise disabled. +:end + +:trim_day_of_the_month_plug: +> Choose a date when the monthly schedule is selected. Otherwise disabled. +:end + +:trim_time_of_the_day_plug: +> When an hourly schedule is selected this will set the interval in hours. An interval always starts on the whole hour (minute 0). +> +> For the other schedules choose here the time of the day trim should start. +:end + diff --git a/Dynamix System Info/systemprofiler.txt b/Dynamix System Info/systemprofiler.txt new file mode 100644 index 0000000..8564676 --- /dev/null +++ b/Dynamix System Info/systemprofiler.txt @@ -0,0 +1,5 @@ +Not available=Недоступно +P + Q algorithm=Алгоритм P + Q +System Overview=Обзор системы +Unraid server=Сервер Unraid +Unraid system=Система Unraid diff --git a/Dynamix System Stats/stats.txt b/Dynamix System Stats/stats.txt new file mode 100644 index 0000000..ecd27e6 --- /dev/null +++ b/Dynamix System Stats/stats.txt @@ -0,0 +1,33 @@ +30 seconds=30 секунд +1 minute=1 минута +2 minutes=2 минуты +5 minutes=5 минут +10 minutes=10 минут +30 minutes=30 минут +1 hour=1 час +2 hours=2 часа +Above=Выше +Array must be Started to view disk stats=Массив должен быть **запущен** для просмотра статистики диска +Array must be Started to view system stats=Массив должен быть **запущен** для просмотра статистики системы +Available for Data=Доступно для данных +Below=Ниже +CPU Load=Загрузка процессора +Disk Usage=Использование диска +disks=диски +High on Usage=Высокий уровень использования +Last day=Последний день +Last 2 days=Последние 2 дня +Last 3 days=Последние 3 дня +Last week=Прошлая неделя +Last 2 weeks=Последние 2 недели +Last 3 weeks=Последние 3 недели +Last month=Прошлый месяц +Low on Space=Мало места +Normal Usage=Нормальное использование +Real-time=В реальном времени +Since start=С самого начала +Storage=Хранилище +Total Array Size=Общий размер массива +Total Space Used=Общее используемое пространство +Used for Parity= +utilization in percentage=использование в процентах diff --git a/Dynamix System Stats/statsettings.txt b/Dynamix System Stats/statsettings.txt new file mode 100644 index 0000000..339849c --- /dev/null +++ b/Dynamix System Stats/statsettings.txt @@ -0,0 +1,85 @@ +30 seconds=30 секунд +1 minute=1 минута +2 minutes=2 минуты +5 minutes=5 минут +10 minutes=10 минут +30 minutes=30 минут +1 hour=1 час +2 hours=2 часа +Bits per second=Бит в секунду +Bytes per second=Байт в секунду +CPU graph scaling=Масштабирование графика ЦП +Disk Stats=Статистика диска +Ethernet interface=Интерфейс Ethernet +Four=Четыре +Header menu=Меню заголовка +Initial graphing mode=Начальный режим построения графиков +Initial real-time sliding window=Начальное скользящее окно в реальном времени +Last day=Последний день +Last 2 days=Последние 2 дня +Last 3 days=Последние 3 дня +Last week=Прошлая неделя +Last 2 weeks=Последние 2 недели +Last 3 weeks=Последние 3 недели +Last month=Прошлый месяц +Network graph display unit=Блок отображения сетевого графика +Opening page=Открытие страницы +Pair=Два +Placement of Stats menu=Размещение статистики в меню +Position of disk utilization percentage=Положение процента использования диска +Real-time=В реальном времени +Show disk size=Показать размер диска +Since start=С самого начала +Single=Один +Storage=Хранилище +System graphs view per row=Просмотр системных графиков в каждой строке +System Stats=Статистика системы +Three=Три +Tools menu=Меню инструментов +Viewable system graphs=Просмотр системных графиков + +:stats_utilization_plug: +> The disk utilization percentage number can be positioned either at the start (left) or at the end (right) of the bar. +> +> Left will align all numbers, while right lets the number float depending on its value. +:end + +:stats_graphs_plug: +> Select which system information needs to be displayed. Internally all information is always gathered and stored. +> +> This setting only affects what is being displayed. +:end + +:stats_scaling_plug: +> Select the CPU graph scaling to be automatic or fixed at 100%. +:end + +:stats_view_plug: +> Select how many graphs will be displayed in a single row. The width is automatically adjusted to the number of graphs and the screen resolution. +> +> Graph samples are internally done with a one minute interval, this setting does not change the resolution, just the width of a graph. +:end + +:stats_disk_size_plug: +> Show the size of each disk at the right side of the disk usage graph. Size is always displayed using the highest possible unit. +:end + +:stats_ethernet_plug: +> When more than one interface is present then select the interface to be displayed. Internally statistics of all available interfaces is kept. +:end + +:stats_unit_plug: +> Select how interface (network) speeds are displayed, common is bits per second. +:end + +:stats_initial_plug: +> The system graphs can be viewd over different periods, select here the intial period. On the system stats page itself this can be changed to any of the other choices. +> +> Internally information is kept with a monthly rotating mechanism. Each day is stored in a separate file. +:end + +:stats_realtime_plug: +> Real-time graphing is done in a sliding window fashion. E.g. 5 minutes are first filled and next start to slide with each new sample added at the end. +> +> This setting sets the initial duration of the sliding window, it can be changed on the system stats page itself. +:end diff --git a/Dynamix System Temp/tempsettings.txt b/Dynamix System Temp/tempsettings.txt new file mode 100644 index 0000000..4a147c9 --- /dev/null +++ b/Dynamix System Temp/tempsettings.txt @@ -0,0 +1,42 @@ +Array fan speed= +Available drivers=Доступные драйверы +Click DETECT=Нажмите ОБНАРУЖИТЬ +Detect=Обнаружить +Load drivers=Загрузить драйверы +Mainboard temperature=Температура материнской платы +No drivers detected=Драйверы не обнаружены +Not used=Не используется +Perl must be installed to do automated driver detection=**Perl** должен быть установлен для автоматического обнаружения драйверов +Processor temperature=Температура процессора +Rescan=Повторное сканирование +Save=Сохранить +Sensors=Датчики +Unload drivers=Выгрузить драйверы + +:temp_drivers_plug: +> Используйте **обнаружить** для поиска доступных драйверов с помощью сценария *sensors-detect*. После обнаружения приступайте к сохранению списка.
+> Используйте **сохранить**, чтобы сохранить список драйверов на диск, поле драйверов можно отредактировать перед сохранением (например, добавить неуказанный драйвер). Сохранение обязательно.
+> Используйте **загрузить драйверы** / **выгрузить драйверы»**, чтобы вручную загрузить или выгрузить доступные модули драйверов. +:end + +:temp_processor_plug: +> Выберите один из доступных датчиков в качестве индикатора температуры процессора. +> Выходные данные этого датчика показаны внизу страницы. +> Выберите **Не используется**, чтобы скрыть отображение этого датчика. +:end + +:temp_mainboard_plug: +> Выберите один из доступных датчиков в качестве индикатора температуры материнской платы. +> Выходные данные этого датчика показаны внизу страницы. +> Выберите **Не используется**, чтобы скрыть отображение этого датчика. +:end + +:temp_fan_plug: +> Select one of the available probes as the array fan speed indicator. +> The output of this probe is shown at the bottom of the page. +> Select 'Not used' to suppress display of this probe. +:end + +:temp_rescan_plug: +> **Повторное сканирование** обновляет список выбора и может использоваться, когда доступны новые датчики, например: установлен новый датчик кулера. +:end diff --git a/Enhanced Log/enhancedsyslog.txt b/Enhanced Log/enhancedsyslog.txt new file mode 100644 index 0000000..1c80b17 --- /dev/null +++ b/Enhanced Log/enhancedsyslog.txt @@ -0,0 +1,4 @@ +Enhanced System Log=Расширенный системный журнал +Minor Issues=Незначительные проблемы +File System=Файловая система +Drive Related=Связанные с диском diff --git a/Enhanced Log/enhancedsyslogsettings.txt b/Enhanced Log/enhancedsyslogsettings.txt new file mode 100644 index 0000000..72bea1a --- /dev/null +++ b/Enhanced Log/enhancedsyslogsettings.txt @@ -0,0 +1,162 @@ +Configuration=Конфигурация +Colors=Цвета +Syslog Colors=Цвета Syslog +Custom Match= +Custom Syslog Match Strings= +Syslog Filter=Фильтр Syslog +Syslog Configuration=Конфигурация Syslog +Syslog Filter Strings=Фильтр строк Syslog +Show All Lines in Log=Показать все строки в журнале +Number of Lines to Display=Количество строк для отображения +Enable Error Highlighting=Включить выделение ошибок +Enable Minor Issues Highlighting=Включить выделение мелких проблем +Enable Lime Tech Highlighting= +Enable Array Highlighting=Включить выделение массива +Enable System Highlighting= +Enable File System Highlighting= +Enable Drive Related Highlighting= +Enable Network Highlighting= +Enable Login Highlighting= +Enable emhttp Highlighting= +Enable Other Highlighting= +Color Selection Chart= +Error Highlight Color= +Minor Issues Highlight Color= +Lime Tech Highlight Color= +Array Highlight Color= +System Highlight Color= +File System Highlight Color= +Drive Related Highlight Color= +Network Highlight Color= +Login Highlight Color= +emhttp Highlight Color= +Other Highlight Color= +; +; Help +; +:enhanced_syslog_show_all_lines_plug: +> Set to **Yes** to show all lines in the enhanced log. Set to **No** to show only highlighted lines. +:end + +:enhanced_log_number_of_lines_plug: +> Number of lines to display in the Enhanced Syslog. Default is 1000. +:end + +:enhanced_log_enable_error_plug: +> Set to **Yes** to enable **Errors** highlighting in the enhanced log. +:end + +:enhanced_log_enable_minor_plug: +> Set to **Yes** to enable **Minor Issues** highlighting in the enhanced log. +:end + +:enhanced_log_enable_limetch_plug: +> Set to **Yes** to enable **Lime Tech** highlighting in the enhanced log. +:end + +:enhanced_log_enable_array_plug: +> Set to **Yes** to enable **Array** highlighting in the enhanced log. +:end + +:enhanced_log_enable_system_plug: +> Set to **Yes** to enable **System** highlighting in the enhanced log. +:end + +:enhanced_log_enable_file_system_plug: +> Set to **Yes** to enable **File System** highlighting in the enhanced log. +:end + +:enhanced_log_enable_drive_plug: +> Set to **Yes** to enable **Drive Related** highlighting in the enhanced log. +:end + +:enhanced_log_enable_network_plug: +> Set to **Yes** to enable **Network** highlighting in the enhanced log. +:end + +:enhanced_log_enable_login_plug: +> Set to **Yes** to enable **Login** highlighting in the enhanced log. +:end + +:enhanced_log_enable_emhttp_plug: +> Set to **Yes** to enable **emhttp** highlighting in the enhanced log. +:end + +:enhanced_log_enable_other_plug: +> Set to **Yes** to enable **Other** highlighting in the enhanced log. +:end + +:enhancd_log_default_plug: +> **Default** resets the Configuration and Colors. Click **Apply** to save your changes. Click **Done** when you are finished with your changes. +:end + +:enhanced_log_color_error_plug: +> Color to use for **Error** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_minor_plug: +> Color to use for **Minor Issues** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_limetech_plug: +> Color to use for **Lime Tech** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_array_plug: +> Color to use for **Array** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_system_plug: +> Color to use for **System** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_file_system_plug: +> Color to use for **File System** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_drive_plug: +> Color to use for **Drive Related** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_network_plug: +> Color to use for **Network** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_login_plug: +> Color to use for **Login** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_emhttp_plug: +> Color to use for **emhttp** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_color_other_plug: +> Color to use for **Other** highlighting. You can use the color name or number. The color number begins with a '#'. +:end + +:enhanced_log_custom_plug: +> Enter any custom events you want highlighted in the log. Any custom events you enter will be processed after the built in events. +> The events are entered as: "search string", "event" +> Case is ignored in the search string and wild cards are allowed. +> Examples: +> "found.*chip" will match any string with 'found' and 'chip' with any text in between, +> "(spinup|spindown)" will match any string with either 'spinup' or 'spindown'. +> The search string and event are quoted, and each line contains one match string and event combination. Errors in the strings can cause php errors. +> Events are: "error", "minor issues", "lime tech", "array", "system", "file system", "drive related", "network", "login", "emhttp", "other". +:end + +:enhanced_log_custom_buttons_plug: +> Click the **Apply** button to save your custom events. Click **Reset** to +> undo any changes you make before you have saved the custom events. Click **Done** to exit this page. +:end + +:enhanced_log_filter_plug: +> You can filter out log entries to keep your Syslog from being overwhelmed with debig or redundant log entries. You should only filter out log entries that you know are unnecessary or redundant. +> Because the Syslog is very important for debugging issues, don't filter out entries unnecessarily. +> Enter the log strings you want to filtered from the Syslog. Each entry is on a separate line with leading and trailing quotes. +:end + +:enhanced_log_filter_buttons_plug: +> Click the **Apply** button to Apply the Syslog filter. Click **Reset** to +> undo any changes you make before you have saved the Syslog filter. Click **Done** to exit this page. +:end diff --git a/File Activity/fileactivity.txt b/File Activity/fileactivity.txt new file mode 100644 index 0000000..67b39f1 --- /dev/null +++ b/File Activity/fileactivity.txt @@ -0,0 +1,39 @@ +File Activity=Файловая активность +File Activity Monitoring=Мониторинг файловой активности +Start File Activity=Начать файловую активность +Stop File Activity Monitoring=Остановить мониторинг активности файлов +Clear the File Activity log= +Refresh log=Обновить журнал +Enable File Activity Monitoring= +Enable for Unassigned Devices= +Enable for Cache and Pool Disks= +; +; Help +; +:file_activity_loggging_plug: +> File Activity Monitoring: +> +> Операции чтения/записи/изменения файлов отслеживаются и регистрируются в массиве с помощью inotify и отображают активность на диске, UD-дисках и кеша. +> Вам необходимо запустить файловую активность, чтобы регистрировать активность диска. +> Файловая активность предназначена для работы в течение коротких периодов времени, чтобы вы могли проверить активность диска. +> Сервер с большой файловой активностью может заполнить пространство журнала. +> Каталог 'appdata' исключен. +> +> Примечание: Ведение журнала активности файлов останавливается, если остановлен массив. +:end + +:file_activity_enable_logging_plug: +> Установите значение **Да**, чтобы включить ведение журнала активности файлов при запуске сервера. +:end + +:file_activity_enable_ud_plug: +> Установите значение **Да**, чтобы включить ведение журнала активности файлов для неназначенных устройств, если установлен подключаемый модуль 'Неназначенные устройства'. +:end + +:file_activity_enable_cache_plug: +> Set to **Yes** to enable File Activity monitoring for the Cache and Pool Disks. Pool disks only apply in Unraid 6.9. +:end + +:file_activity_log_by_plug: + > Set to **Disk** to log disk activity. Set to **Share** to log share activity. +:end diff --git a/Hotplug USB/libvirthotplugusb.txt b/Hotplug USB/libvirthotplugusb.txt new file mode 100644 index 0000000..d66ed29 --- /dev/null +++ b/Hotplug USB/libvirthotplugusb.txt @@ -0,0 +1,22 @@ +Hotplug USB=Горячее подключение USB +Running VMs=Запущенная ВМ +Attach=Подключить +Attach the USB device to the selected VM=Подключить USB-устройство к выбранной виртуальной машине. +Detach=Отключить +Refresh this page=Обновите эту страницу +Detach the USB device from the selected VM=Отключить USB-устройство от выбранной виртуальной машины. +Result=Результат +Result of attachdetach operation=Результат операции подключения/отключения +Note=Примечание +Some USB Devices require detaching and attaching multiple times to be properly detected by VMs=Некоторые USB-устройства требуют отсоединения и подключения несколько раз для правильного обнаружения виртуальными машинами +If you disconnected the USB device while it was attached to a VM, you will have to detach it and then re-attach it=Если вы отключили USB-устройство, когда оно было подключено к виртуальной машине, вам придется отсоединить его, а затем снова подключить. +Detaching Please wait=Отключение, пожалуйста, подождите +Attaching Please wait=Подключение, пожалуйста, подождите +No VM Selected=ВМ не выбрана +No USB devices=Нет USB-устройств +; +; Help +; +:libvirt_hot_plug: +> Выберите виртуальную машину для USB-устройства, которое нужно подключить/отключить, и USB-устройство для выбранной виртуальной машины. +:end diff --git a/Open Files/openfiles.txt b/Open Files/openfiles.txt new file mode 100644 index 0000000..c878081 --- /dev/null +++ b/Open Files/openfiles.txt @@ -0,0 +1,22 @@ +Process=Процесс +Kill Process=Завершить процесс +Process ID=ID процесса +Open Files=Открытые файлы +Files that may prevent shutdown=Файлы, которые могут помешать завершению работы +File Name and Path=Имя файла и путь +An entry for bash means you have a terminal session open with the working directory on the array=Запись для bash означает, что у вас открыт сеанс терминала с рабочим каталогом в массиве. +If smbd is listed, it means that another computer has a samba share mounted=Если в списке указан smbd, это означает, что на другом компьютере смонтирован общий ресурс Samba. +Files open by Samba usually wont prevent array shutdown= +No open files=Нет открытых файлов +Kill=Завершить +Command timed out=Время ожидания команды истекло +Cannot get list of open files=Невозможно получить список открытых файлов +; +; Help +; +:open_files_help_plug: +> Нажмите кнопку **Завершить**, чтобы остановить процесс, в котором файлы остаются открытыми. +> Откроется диалоговое окно, показывающее прогресс завершения процесса, удерживающего эти файлы открытыми. +> +> Click on **Process**, **Process ID**, **Files That May Prevent Shutdown**, or **File Name and Path** to change the sort order. +:end diff --git a/Parity Check Tuning/paritychecktuning.txt b/Parity Check Tuning/paritychecktuning.txt new file mode 100644 index 0000000..2ce4950 --- /dev/null +++ b/Parity Check Tuning/paritychecktuning.txt @@ -0,0 +1,457 @@ +; Translation text for the Parity Check Tuning plugin + +; PART 1 - text strings + +; Parity Check Settings Page + +Parity Check Tuning= +automatic= +Basic= +below critical disk temperature threshold= +below warning disk temperature threshold= +CAUTION= +Click to show parity-check history= +Data Rebuild= +Debug=Отладка +Disk Clear=Очистить диск +Donate to plugin author=ПОЖЕРТВОВАТЬ +entry in %s format=запись в %s формате +High disk temperatures can shutdown server=Высокая температура диска может привести к выключению сервера +Increment frequency=Частота увеличения +Increment pause time=Увеличить время паузы +Increment resume time=Увеличить время возобновления +No parity check entries found in syslog= +ParityRead-Check History=Parity/Read-Check History= +Parity Check= +Parity Check Tuning logging= +Parity Sync= +Pause an array operation at= +Pause and Resume array operations if disks overheat= +Read Check= +Requires unRaid 67 or later=Requires unRaid 6.7 or later= +Resume an array operation at= +Resume parity checks on next array start= +Resume running Array operations on next array start= +Run %s %s in increments= +scheduled=по расписанию +Send notifications for Pause or Resume of increments= +Send notifications for temperature related Pause or Resume= +Shutdown server at= +Syslog only= +Syslog and Flash= +Flash only= +Testing=Тестирование +Unscheduled=Внеплановый +Use increments for %s %s= +Use increments for disk Clear operations= +Use increments for Parity-SyncData Rebuild operations=Use increments for Parity-Sync/Data Rebuild operations +You require a parity disk present for this option to be relevant= + +; Parity Problems Assistant page +Parity Problems Assistant= +; page intro text +:parityProblems_intro_plug: +The **Parity Problems Assistant** is part of the **Parity Check Tuning** plugin.

+The current status is **EXPERIMENTAL** and it is always possible that this assistant may be removed in the future). +**(feedback is welcomed on the basic concept and ideas for improvement)**.

+The idea is that this assistant can be used after a parity check or read check has reported problems and logged the details of any problem sectors to the syslog. +In many cases such errors can be due to external factors such as cabling or the power supply rather than the actual disks.

+It is also not uncommon, particularly on **Ryzen/ThreadRipper** based systems, to get random parity errors if the RAM is overclocked +(an XMP profile **is** an overclock), +and the motherboard/CPU combination may also impose limits that are lower than the RAM is capable of supporting.

+If you think you have rectified whatever caused the problems to occur then you can use this assistant to run a partial check over a narrow range to see if the problem still occurs. +This can be much faster than having to run a full parity check or read check to see if you have resolved the issue or to run a disk extended SMART test to test the actual disk.

+**IMPORTANT**: This assistant should never be used as an alternative to running a full parity check once you think the problem has been resolved. +:end +; fields +Click to show Error Sectors from syslog= +End point for check= +Method used to specify start and stop points= +Only read checks can be performed= +percent= +Percentage=Процент +sector= +Sector Numbers=Номера секторов +Show Sector Numbers= +Start Check=Начать проверку +Start point for check=Начальная точка для проверки +Write Corrections to Parity= + +; PHP file messages + +Analyze results from an array operation= +Array being shutdown due to drive overheating= +Array operation will not be restarted= +Array operation restarted= +Array shutdown= +Cancel a running parity check= +Correcting=Исправление +Detected a change to the disk configuration= +Drives cooled down= +Elapsed Time=Пройденное время +ERROR=ОШИБКА +Following drives overheated= +IMPORTANT= +Increments= +Non-Correcting= +Pause a running array operation= +Resume a paused array operation= +Sent notification= +Show the status of a running parity check= +Shutdown= +Start a correcting parity check= +Start a correcting parity check= +Start a parity check with scheduled settings= +Starting Shutdown= +Unclean shutdown detected= +Unknown action= +Unrecognized option= +Usage= +where action is one of= + +; Notifications + +aborted due to Unclean shutdown= +array stopping so progress will be lost= +; The type of array operation (parity check, clear, rebuild) will be appended to the following text +Automatic unRaid= +Average Speed=Средняя скорость +completed= +Correcting Parity Check= +Drives cooled down= +errors=ошибки +finished= +Increments= +NonCorrecting Parity Check=Non-Correcting Parity Check +Pause=Пауза +Paused=Приостановлено +Resume=Продолжить +Resumed= +Runtime= +Scheduled pause=Запланированная пауза +Unclean shutdown detected= +will be started=будет начато + +; Swal warnings + +A crontab entry should have 5 space-separated values defining the minutes, hour, day of the month, month, day of the week= +At the moment there is no mechanism to stop this file from growing forever so it is up to you to manage this manually= +Are you sure you have not got these the wrong way around= +Before you can set this option to Yes you must first have enabled system notifications= +Click on the crontab link to get more details on valid formats= +Debug mode can generate frequent additional log entries in the syslog file so do not leave debug mode active if you are not interested in this information= +Debug mode is intended to give users a feel for when the plugin is active= +Do not leave this active if you are not interested in this information= +Do you really want Debug logging mode= +Do you really want Testing logging mode= +Do you really want to log to the flash drive= +Do you really want this= +Error in custom entry= +extra time that will elapse before the system is once again in a protected state= +Logging to the flash drive can cause a lot additional writes thus potentially shortening its lifetime= +Notifications not enabled= +On most systems a disk Clear operation does not adversely affect performance so typically this option is left disabled= +Only enable this option if the operation is adversely affecting system use and you are not worried about the extra time that will elapse before the system is once again in a protected state= +Pause and Resume times= +Pausing a disk Clear operation extends the time before the disk is successfully added to the array and becomes ready for formatting and then used for data storage= +Pausing an operation that is building parity or rebuilding a failed disk has a level of risk as your array is not back in a protected state until= +Temperature Pause and Resume= +Testing mode is normally only used by the plugin author or when gathering evidence of a suspected bug in the plugin= +Testing mode is very verbose and generates a lot of additional log entries so you do not want it enabled unless this is really necessary= +The Pause and Resume times would give an increment length of more than 12 hours which is unusual= +The Resume value must be greater than the Pause one for the heat related Pause and Resume to work correctly as they are both subtracted from the disk temperature warning value when calculating the desired temperature= +The value you have specified seems unusually large as it is not an absolute value but is relative to the value specified for the drives Temperature Warning level at the unRaid level= +This might affect array integrity= +Unusually large value= + +; Syslog messages (with debug logging disabled) + +%s Cancelled= +Array not started so no action taken= +as drives now cooled down= +Following drives overheated= +Only able to start a Read-Check due to number of disabled drives= + +; Syslog messages (with debug logging enabled) +; (probably not worth translating these as they are mainly of use to the plugin developer) + +appears to be a regular scheduled check= +%s cancel request sent %s= +already running= +array drives= +Array operation paused but drives not cooled enough to resume= +Array operation paused but not for temperature related reason= +Array stopping= +Array stopping while %s was in progress %s= +but no action currently taken on started event= +but no parity check was in progress when array stopped= +Cancel request= +cool= +created cron entries for running increments= +created cron entry for monitoring disk temperatures= +Detected that array has not yet been started= +Detected that array has just been started= +detected that mdcmd had been called from %s with command %s= +ERROR=ОШИБКА +hot= +Loading progress file %s= +No action specified= +No array operation currently in progress= +No cron events for this plugin are needed= +No drives appear to have reached shutdown threshold= +Not allowed as %s already running= +Option not currently recognized= +Parity check appears to be paused= +Parity Check was in progress when array stopped at %s= +Pause of= +Pause request= +Removed existing state file %s= +Resume request= +so no further action to take= +Temperature monitoring switched off= +Unscheduled array operation in progress= +using scheduled mode of %s= +warm= +with all array drives below temperature threshold for a Pause= + +; Syslog messages (with testing logging enabled) +; (almost certainly not worth translating these as they are mainly of use to the plugin developer) + +analyze previous progress before starting new one= +Array not started so no action taken= +Drive %s%s appears to be critical= +Plugin temperature settings= +shutdown %s= +Shutdown not actioned as running in TESTING mode= +updated cron settings are in %s= + +; PART 2 - TEXT Blocks ant HELP text + +End point for check= +Method used to specify start and stop points= + +; Help text on settings page +; These could perhaps be left in English to keep translation task easier) + +:parity_tune_explain_plug: +> The main purpose of this plugin is to allow you to limit array operations such as parity checks to running at times that will not inconvenience you. +> +>If you have set this to **No** then you get the default system behavior of parity checks running without a break to completion unless you manually stop/pause/cancel them. +> +>Setting this option to **Yes** specifies that parity checks should be run in increments spread over several days. +> As an example of what this plugin can do assume +>You have a parity check you have scheduled to start on the first of every month at midnight +>* Your past experience has shown that if the parity check runs uninterrupted it takes 30 hours to complete. +>* You set this plugin to use 3 hour increments starting at midnight and finishing at 3.00 A.M. +>* The parity check will now actually take 10 days elapsed time (10 x 3 = 30) so the parity check will complete on 10th of the month. +>* You have scheduled these increments to run starting at midnight and finishing at 3:00 A.M. when you know the system is not being used. +>* You are not worried about this increased elapsed time and will welcome the increased system responsiveness during normal use. +>* The rest of the month this plugin will do nothing as there is no active parity check in progress when the start time for an increment comes around. +> +>**CAUTION:** If the array is stopped while an array operation is incomplete then the progress so far is lost and it can only be restarted from the beginning +:end + +:parity_tune_increments_plug: +>Setting this option to **Yes** specifies that parity checks should be run in increments spread over several days. +> +>If you have set this to **No** then you get the default system behavior of parity checks running without a break to completion unless you manually stop/pause/cancel them. +> +>**CAUTION:** The default unRaid behavior is that if the array is stopped while an array operation is incomplete then the progress so far is lost and it can only be restarted from the beginning. +:end + +:parity_tune_frequency_plug: +> The frequency at which parity check increments should be run.

In normal operation it is expected that the Daily option will be the one that most users will want to use so this is the default. To support any user looking for other frequencies there is the option to set up Custom schedules which will allow for more complicated schedules for the Pause and Resume times. When you use this option you are given the option to specify the time as used by the Linux crontab utility +:end + +:parity_tune_manual_plug: +> Should parity checks that are started manually also be run in increments? +> +> It is quite likely that you will want such a check to run to completion without interruption and if so leave this option set to **No**. +> With this option set to **Yes** then if you manually start a Parity Check from the Main page and then manually Pause the check, this will result in the check being run in increments between the scheduled times until the Parity Check completes. +:end + +:parity_tune_automatic_plug: +> if the unRaid system is not shutdown cleanly then the next time the array is started unRaid will automatically start a non-correcting parity check (or a read check if you have no parity disk). This can happen for a wide variety of reasons ranging from power loss; hardware issues; and software issues. The automatic check is run because if there are any parity errors this can compromise the ability to recover from an array drive failure at a later date so you want to get back to having valid parity as soon as is practical. +> +> If this option is set then the check will be allowed to run for a few minutes (as any errors after an unclean shutdown are most likely to be at the start of the disks as they were not unmounted cleanly) and then automatically put the check into a paused state (if outside the time specified for running increments) and then the remainder of the check subsequently run in increments according to the time slots specified for running increments. +:end + +:parity_tune_frequency_plug: +> The frequency at which parity check increments should be run. +> +>In normal operation it is expected that the **Daily** option will be the one that most users will want to use so this is the default. To support any user looking for other frequencies there is the option to set up **Custom** schedules which will allow for more complicated schedules for the Pause and Resume times. When you use this option you are given the option to specify the time as used by the Linux crontab utility. +:end + +:parity_tune_resume_plug: +> The time at which a paused parity check should be resumed.
If no parity check is currently paused when this time comes around then no action will be taken. +> +>Typically this time would be set to be the start of an idle period overnight. An appropriate value might be to use the same time that you have specified for a scheduled parity check to start. +> +>If the increment period has been set to **Custom** then the hours/minutes fields are hidden and you are instead given the option to set the time in crontab format. +:end + +:parity_tune_pause_plug: +> The time at which a running parity check should be paused. Typically, this would be set to be a time when you want other activity to not be affected by a running parity check. +>If no parity check is actively running when this time comes around then no action will be. +> +>Normally you want to make sure that this time is set to be after the time that you schedule regular parity checks to run. The first increment will then be from when the regular parity check is scheduled to start up to the time you have specified for the increment to end. +> +>If the increment period has been set to **Custom** then the hours/minutes fields are hidden and you are instead given the option to set the time in crontab format. +> +>You also want to make sure that the time allocated to running increments is sufficient to expect the parity check to run to completion before the next check is scheduled to start. Since most people only schedule parity checks to run infrequently (e.g. Monthly or Quarterly) then this is unlikely to be an issue but it is something to take into consideration. +:end + +:parity_tune_notify_plug: +> Setting this option to Yes means that you will be sent a notification every time the plugin Pauses or Resumes an array operation. +>If you would rather not get such notifications then leave this option set to **No**. +>The notification is sent as a **Notice** category message to the targets specified under *Settings->Notification Settings*. +:end + +:parity_tune_allops_plug: +> Should operations that involve building new parity or rebuilding a failed disk be run using increments? +> +>This type of check will only be run if there is potentially some issue with your array and action is being taken to get it back into a protected state. +> +>**IMPORTANT**: Until this operation completes your array is not fully protected so it is assumed that most people will want this option left at **No**. +> Do not select **Yes** unless you are absolutely certain that is what you want. +:end + + +:parity_tune_clear_plug: +> Should disk Clear operations be run using increments.

A disk Clear operation occurs when you add a new drive (that has not been pre-cleared (using the Pre-Clear plugin) to an array that is parity protected. The Clear process writes zeroes to every sector on the new disk so that it can be added to the array without affecting the existing parity. Until the Clear operation has completed you are not able to format the disk in unRaid and start using it for storing data. +> +>Since until the Clear operation completes the disk will not be available for use it is likely that most people will want this option left at **No**. In addition, a Clear operation tends not to put much of a load on the system so is less likely to impact performance in normal daily use. +:end + +:parity_tune_restart_plug: +> Unraid will normally abandon a parity check if the system is shutdown, rebooted or the array is stopped (with the only option being to restart the parity check from the beginning). +> Setting this option allows parity checks to be restarted by this plugin from the point they had reached as long as the following criteria are met: +>* The array was shutdown tidily +>* The user must not have made any changes to the array configuration. +> +>As long as these criteria are met then when the array is next started the operation is resumed from the point previously reached. +> +>**NOTES:** +>* If the array operation was within the time set for a scheduled increment to be running then on restarting the array operation it will be set to be paused if now outside the time set for running increments. +>* If the array operation was manually paused then the restarted array operation will also be paused +>* If you want to use this feature by simply stopping the array without immediately using the **Reboot** or **Shutdown** buttons then you first need to manually **Pause** the array operation before using the **Stop** button. If you to this and successfully stop the array then the array operation will now be resumed if you simply **Start** the array again, and also on the next array start after **Reboot** or **Shutdown**. +:end + +:parity_tune_hot_plug: +> Pause an array operation(Parity Check, Parity-Sync/Disk Rebuild, disk Clear)if the disk temperatures exceeds the limits you have set. +> +>The temperatures are checked against the thresholds set for the Warning disk temperature levels. If a threshold has been defined for an individual drive (accessed by clicking on the drive in the Main tab) then this is the value used. If not the global setting (set via *Settings->Display Settings*) will be used. It is assumed that normally you would want the array operation to be paused before the value set at the unRaid level as the Warning Threshold. +> +>A much better solution is to improve the cooling in your case so that the disks never overheat. In practice this may not always prove practical. +> +>If the array operation was part of running an increment then it will not be resumed outside the time allotted for the increment. If the array operation was initiated for any other reason then the Pause/Resume behavior on temperature is always active. +:end + +:parity_tune_warn_plug: +> This value indicates how close to the value set for the Warning Disk Temperature Threshold a disks temperature is allowed to reach before a **pause** of a running array operation is triggered. If an explicit threshold has been defined for an individual drive then this is the value used. If not the global setting will be used. +> +> You normally want a small positive value to trigger the pause before Unraid gets around to sending you a notification that the temperature warning threshold has been reached for a disk. +> +> As an example if the Warning threshold for a drive is 50C then setting a pause value of 5 would cause the plugin to pause the operation if that drive reached 45C (50-5). +> +>If there is no active array operation then no action will be taken even if disk temperatures exceed the specified threshold. +> +> If there is no running array operation then no action will be taken. +:end + +:parity_tune_low_plug: +> This value indicates how much below the Warning temperature threshold of a drive must reach before a **resume** of an array operation is issued. +> +>You need to get a good balance between array operations being resumed too soon (and thus quickly reaching the level to initiate another pause) and wasting a lot of time. +> +>If a disk ever gets spun down the temperature is not readily available so it will be assumed that this criteria has been met +> +>If there is no paused array operation then no action will be taken. +:end + +:parity_tune_temp_notify_plug: +> Setting this option to **Yes** means that you will be sent a notification every time the plugin Pauses or Resumes an array operation due to the temperature of your drives.
If you would rather not get such notifications then leave this option set to **No**. The notification is sent as a **Notice** category message to the targets specified under *Settings->Notification Settings*. +:end + +:parity_tune_shutdown_plug: +> If set to **Yes** then automatically start a tidy shutdown of the server if any disk in the array or a cache pool reach the defined temperature threshold. +> The temperatures are checked against the thresholds set for the **Critical** disk temperature levels. If a Critical temperature has been defined for an individual drive (accessed by clicking on the drive in the Main tab) then this is the value used. If not the global setting (*Settings->Display Settings) will be used. +> +>This option intended to be triggered if for some reason the system's cooling system is insufficient or if it has failed in some way. The idea is that you want to do a tidy shutdown before the disks become damaged due to overheating badly. The shutdown that is triggered is functionally the same as would be the case of pressing the Shutdown button on the Main page of the unRaid GUI. If notifications are enabled then you are sent one to indicate that this has happened. +> +>When the server is started up again after such a shutdown then when the array is started you will be notified that a temperature related shutdown happened in case you were not aware of the reason. +> +>**CAUTION:** If the array is stopped while an array operation is incomplete then the progress so far is lost and it can only be restarted from the beginning. +:end + +:parity_tune_critical_plug: +> This value indicates how close to the value set for the Critical Disk Temperature Threshold a disks temperature is allowed to reach before a shutdown of the server is triggered. +> You may want a small positive value to trigger the pause before unRaid gets around to sending you a notification that the temperature critical threshold has been reached for a disk. +> +>If an explicit threshold has been defined for an individual drive then this is the value used. If not the global setting will be used. +:end + +:parity_tune_logging_plug: +> Control the level of detail in entries. The level of detail can be increased to help with debugging any problems using this plugin might encounter. +> +>Messages by this plugin are identified by the fact that they are shown as coming from +>* **Parity Check Tuning** +>* **Parity Problems Assistant** +>depending on which part of the plugin generated the messages +> +>With the **Basic** option set these will only be a small number of messages indicating that this plugin has taken some action. +> +>Setting this option to **Debug** will result in additional entries being written to the syslog that give more information on what is happening when this plugin is running. They show how some of the internal operation of how the plugin is functioning. These additional entries are identified by the fact that they will have the word **DEBUG** added to the start of messages. Some users (particularly those who have not used this plugin before) may like to use it to see more detail on how this plugin operates, but it is not expected that this option will be left enabled in normal running. +> +>Finally there is an additional setting of **Testing** that is only intended for use by the developer but is left here for convenience. It will write even more verbose messages to the syslog but these are not likely to be interesting (or even meaningful) to the average user. These messages will have the word **TESTING** added to the start of messages. You should only run this level of logging if you have been asked to as it can quickly fill up your syslog if you are not careful. +> +>Feedback is welcome as to whether it is worth introducing any intermediate option that outputs information type messages on the plugin's activity, while omitting some of the lower level detail that is aimed at diagnosing any problems that might be encountered while the plugin is running. +> +>If you have Testing mode set for the logging then you can choose where you want log messages to be recorded. The default is the standard system syslog and this is the inly option allowed in Basic mode. The syslog is held in RAM so does not cause excessive writes to the flash drive. +>To facilitate with debugging problems then in Testing mode you can log the messages to the flash drive either instead of the syslog or in addition to the syslog. The resulting parityTuning.log file will be stored in the plugin's folder on the flash drive and providing this file to the developer will help with diagnosing any unexpected behaviour you encounter. +:end + +:parityProblems_type_plug: +> Select the way you want to specify the start and end points. +> +> You are likely to want to use absolute sector numbers if there are ones that have previously been listed in the syslog as being an error. +> Using absolute sector numbers tends to be more precise and lead to shorter tests but can be more effort to set up. +> +> The alternative is to use percentages. When using percentages then the sector numbers these represent are calculated as percentages of the largest parity disk. +:end + +:parityProblems_start_plug: +> Select where you want the check to be started from. You can specify the start point as either a sector number or as a percentage of the size of the largest parity disk. +> +> Specifying absolute sectors is likely to be of particular use when you have extracted the sector numbers from the *syslog* when the original parity check reported errors on those sectors. In a future version of this plugin the plugin may be enhanced to automatically extract such sectors from the *syslog* and give you a drop down list but this feature is not yet implemented. +> +> In practice for technical reasons the check may start slightly earlier than the point you specify, but this will only be by a small amount. +:end + +:parityProblems_end_plug: +> Select where you want the check to be ended. You can specify the start point as either a sector number or as a percentage of the size of the largest parity disk. +> +> In practice for technical reasons the check may end later than the point you specify as a check is only made once a minute to see if the end point has been reached. +:end + +:parityProblems_correct_plug: +> Specify whether you want to attempt to update parity to correct any error found, +> or just do a read test to see if any parity errors are reported. +:end + +:parityProblems_correct_plug: +> Specify whether you want to attempt to update parity to correct any error found, +> or just do a read test to see if any parity errors are reported. +:end + +:parityProblems_check_plug: +> When you click on the option to **Start Check** then a partial check is initiated that +> will cover the start and end points that you have specified. It will be a correcting check +> if the option to **Write Corrections** is set to **Yes**, and a read-check otherwise. +:end + +:parityProblems_sectors_plug: +> When you click on the option to **Show Sector Numbers** then the a dialog will be shown +> that extracts entries from the syslog that have shown any sectors for which any parity +> sector is displayed and whether the it was being corrected or is a parity error. +:end diff --git a/README.md b/README.md index 465eea9..d3370ec 100644 --- a/README.md +++ b/README.md @@ -2,7 +2,7 @@ ### READ THIS WHEN YOU WANT TO MAKE TRANSLATIONS TO ANOTHER LANGUAGE -There are sixteen main text files included in this repository, each with their own section of translations: +There are sixteen text files included in this repository, each with their own section of translations: - translations.txt -- these are general translations and loaded each time - helptext.txt -- these are all help text sections and loaded each time @@ -17,9 +17,9 @@ There are sixteen main text files included in this repository, each with their o - tools.txt -- these are translations for the tools section - javascript.txt -- these are translations for javascript scripts - scripts.txt -- these are translations for local scripts -- apps.txt -- these are translations for the CA section (in Community Apps folder) -- ca_settings -- these are translations for the CA settings (in Community Apps folder) -- javascript.ca.txt-- these are translations for the CA javascript (in Community Apps folder) +- apps.txt -- these are translations for the CA section +- ca_settings -- these are translations for the CA settings +- javascript.ca.txt-- these are translations for the CA javascript All file names are in lowercase and should be included in the repository to make the translations complete. diff --git a/Recycle Bin/recyclebin.txt b/Recycle Bin/recyclebin.txt new file mode 100644 index 0000000..05d7dee --- /dev/null +++ b/Recycle Bin/recyclebin.txt @@ -0,0 +1,125 @@ +Age Days= +Array=Массив +Array is stopped=Массив остановлен +Browse the Share Recycle Bin=Просмотр общей корзины +Deleted Files=Удалённые файлы +Deleted Files Log=Журнал удалённых файлов +Empty=Пусто +Empty the=Очистить +Empty All Trash=Очистить всю корзину +Empty Trash=Пустая корзина +Enable on Unassigned Devices=Включить на неназначенных устройствах +Enable Recycle Bin=Включить корзину +Excluded Directories=Исключённые каталоги +Excluded Files=Исключённые файлы +Excluded Shares=Исключённые общие ресурсы +Log Deleted Files=Записывать удаление файлов в журнал +Recycle Bin=Корзина +Recycle Bin Log=Журнал корзины +Recycle Bin parameters=Параметры корзины +Recycle Bin permissions=Разрешения корзины +Recycle Bin Total Size=Общий размер корзины +Refresh the Recycle Bin page=Обновить страницу корзины +Remove Aged Files=Удалить устаревшие файлы +Remove aged files from the Recycle Bin=Удалить устаревшие файлы из корзины +Remove Aged Files Notification=Уведомлять об удалении устаревших файлов +Remove Aged Files on Schedule=Удалять устаревшие файлы по расписанию +Remove all files from the Recycle Bin=Удалить все файлы из корзины +Restart the Recycle Bin=Перезапустить корзину +Share Type= +SMB Share= +Start the Recycle Bin=Запустить корзину +Starting and stopping the Recycle Bin can cause SMB shares to go offline for a short period= +Stop the Recycle Bin=Остановить корзину +These actions apply to all shares= +Trash Size=Размер корзины +Update Recycle Bin Size in Background=Обновлять размер корзины в фоновом режиме +Recycle Bin is empty=Корзина пуста +; +; Help +; +:recycle_bin_shares_plug: +> Recycle Bin Shares: +> +> The shares with Recycle Bin contents will be displayed along with the size of the share's Trash Bin. +> Click on the Browse icon to browse the deleted files in that share. +> Click on the Empty button to remove the deleted files. +> +> Unassigned Devices shares will only show if the Recycle Bin is enabled for Unassigned Devices and there are Unassigned Devices that are mounted and shared and have Recycle Bin contents. +> +> Click on the 'SMB Share', 'Share Type', or 'Trash Size' columns of the table header and the contents will be sorted. The 'Trash Size' is an alpha numeric and not a numeric sort. +:end + +:recycle_bin_enable_plug: +> Set to **Yes** to enable the Recycle Bin functionality for deleted files when the server is started. +> +> To hide the Recycle Bin folder, set 'Hide Dot Files to 'Yes' in the SMB settings here. +:end + +:recycle_bin_background_plug: +> Set to **Yes** to enable the Recycle Bin Size to be updated in the background every five minutes. This can make the Recycle Bin Settings and Shares pages more responsive and prevent disk spinups when accessing the Recycle Bin. The Recycle Bin size can take up to five minutes to refresh when this is enabled. +:end + +:recycle_bin_ud_plug: +> Set to **Yes** to enable the Recycle Bin deleted file functionality on Unassigned Devices drive shares when the Unassigned Devices plugin is installed. SMB/NFS mounts and iso mounts are excluded from the Recycle Bin functionality on this server. Enable the Recycle Bin on the remote server where the remote share originates if it is an Unraid server. +:end + +:recycle_bin_parameters_plug: +> Additional parameters for Recycle Bin. The following are some options you can set to control the file structure of the deleted files. +> Enter the parameters in a list with no spaces or commas between them. +> The order of the parameters will affect the file structure in the Recycle Bin. +> Leaving this field blank will put all deleted files in the Recycle Bin without any path information. +> +> Hint: Use the '/' for more control of the directory structure in the Recycle Bin. +> For example '%m/%S' will organize the deleted files by the machine name that deleted the file and then the share name structure. +> +> + '%S' Samba share name (which in Unraid equals the share name), eg. Storage +> + '%P' User share full path, eg /mnt/user/Storage, /mnt/disk1, /mnt/disks/unassigned_device, /flash +> + '%u' Username of the current service, if any +> + '%m' Machine name of the user who deleted the file +:end + +:recycle_bin_permissions_plug: +> Set the directory and sub-directory permissions of the Recycle Bin. Set permissions to 07xx for the Recycle Bin to operate properly. Don't change this from the default if you don't know how to use permissions. +:end + +:recycle_bin_excluded_files_plug: +> List of files to exclude from the Recycle Bin separated by commas. Wild cards '*' and '?' are allowed. +:end + +:recycle_bin_excluded_dirs_plug: +> List of directories to exclude from the Recycle Bin separated by commas. To specify a particular share directory, use 'share/directory'. You can specify up to one sub-directory. Unassigned Devices are specified the same way using 'mountpoint/directory'. Wild cards '*' and '?' are allowed in the directory name. +:end + +:recycle_bin_excluded_shares_plug: +> List of shares to exclude from the Recycle Bin separated by commas. This list can include Unassigned Devices shares. The share name is case sensitive. +> +> The excluded share can include part of a share name and will exclude all shares with the excluded share text in the actual share name. If you want an exact match, use the full share name. +> +> For example: 'Squidbait' (without quotes) will exclude all shares created by the Ransom Ware plugin. +> +> Note: Excluding a share only excludes it from deleted files going to the .Recycle.Bin folder on the share. Files in the existing .Recycle.Bin folder will still show in the total size and on the 'Shares' tab. +:end + +:recycle_bin_age_day_plug: +> Any files older than the set number of days are removed on the schedule or when the 'Remove Aged Files' button is clicked. +:end + +:recycle_bin_remove_age_files_plug: +> Set the desired schedule to remove aged files. Hourly will be on the hour every hour. Daily will be every day at 3 AM. Weekly will be every week at 3 AM on Sunday. +:end + +:recycle_bin_age_files_notification_plug: +> When set to **Yes** a notification will be sent when the scheduled remove files task runs. +:end + +:recycle_bin_log_deleted_files_plug: +> When set to **Yes** deleted files will be logged. +:end + +:recycle_bin_show_log_plug: +> Recycle Bin Log: +> +> The deleted files will show in the log as unlinked files. +> Click on the 'Clear' button to clear the log. +:end diff --git a/Tips and Tweaks/tipsandtweaks.txt b/Tips and Tweaks/tipsandtweaks.txt new file mode 100644 index 0000000..9cf4d5f --- /dev/null +++ b/Tips and Tweaks/tipsandtweaks.txt @@ -0,0 +1,180 @@ +Tips=Советы +Tweaks=Твики +The Tips below are suggestions, workarounds for known problems, and potential fixes=Приведённые ниже советы - это предложения, обходные пути для известных проблем и возможные исправления. +It is recommended that you update Unraid to the latest stable version to get the latest features, bug fixes, and security updates=Рекомендуется обновить Unraid до последней стабильной версии, чтобы получить последние функции, исправления ошибок и обновления безопасности. +Support for older versions of Unraid is being phased out=Поддержка старых версий Unraid постепенно прекращается +Many plugins are no longer compatible with older Unraid versons=Многие плагины больше не совместимы со старыми версиями Unraid. +Install the Fix Common Problems plugin and resolve any Unraid configuration problems=Установите плагин Fix Common Problems и устраните любые проблемы с конфигурацией Unraid. +Use the Update Assistant that is part of the Fix Common Problems plugin= +This will identify potential problems to be solved before you upgrade the Unraid OS=Это позволит определить потенциальные проблемы, которые необходимо решить перед обновлением ОС Unraid. +Check the=Проверить +Tips and Tweaks wiki=Советы и Твики в ВиКи +for additional ideas on improving your Unraid performance and solving problems=для дополнительных идей по улучшению вашей производительности Unraid и решению проблем +Some have reported better VM performance with media streaming and gaming VMs with the suggestions on this= +post= +Some have reported faster and more consistent network performance by making changes in networking parameters on the Tweaks tab of this plugin= +If you have an Intel Processor, it may appear that all CPUs are constantly running at full speed= +Read this=Прочитайте это +for information on the issue=для информации по проблеме +If you set the 'Power Save' CPU Governor, you may see your processors stuck at 800 MHz= +It is recommended you use the 'Performance' Governor for best performance and power savings= +It is recommended to use the pstate driver on Intel processors if you want the most performance= +Note=Примечание +You can check CPU frequencies on the command line with=Вы можете проверить частоту процессора в командной строке с помощью +The dashboard shows CPU loading and not CPU frequency= +If you configure VLANs on Unraid, you should make Unraid the Master Browser= +If you dont Unraid may not detect the Master Browser for all network interfaces correctly= +Some people are reporting OOM out of memory errors= +This seems to be occurring more now because of the large amounts of memory being installed in Unraid and the default Disk Cache settings too high= +If you are experiencing OOM errors, try adjusting the Disk Cache settings on the Tweaks page= +There is a very cool feature in Unraid 6 and up that can be used to capture your logs and help in troubleshooting a situation where your server locks up or becomes unresponsive= +Go to Settings->Syslog Server and enable the Syslog Server= +Put the IP address of your server in the Remote syslog server field= +This will log all your server log enries to the Syslog Server and save the log to an array share= +After a reboot from a lockup or hung server, you can view the saved log using the Syslog viewer= +The first thing you should do is to install the Fix Common Problems plugin to find and fix common problems= +Correct any problems that are identified before doing any tweaking= +You may actually cause more problems than you solve if there are problems with your Unraid configuration= +Make one change at a time and verify if it improves your situation= +Make changes slowly= +Making changes here can briefly interrupt your network operation= +Some of the settings will consume RAM and may end up causing Linux to terminate some processes to free up RAM= +Click on Help for more information= +Disable NIC Flow Control= +Disable NIC Offload= +Ethernet NIC Rx Buffer= +Ethernet NIC Tx Buffer= +Ethernet NICS= +Dont change the Disk Cache settings until you read and understand this= +Guide=Гид +Disk Cache=Дисковый кэш +Max Watches= +CPU Scaling Governor= +Enable Intel TurboAMD Performance Boost= +Time to set= +Enable syslog Archiving= +Number of syslogs to Archive= +Processes to kill before Array is Stopped= +Current NIC settings= +Current Disk Cache Settings= +Current Inotify Settings= +CPU Frequency Scaling= +Flow Control= +NIC Offload= +NIC Rx Buffer= +NIC Tx Buffer= +The feature is not available on any of your NICs= +Current Disk Cache Settings= +Current Inotify Settings= +Driver=Драйвер +Governor= +; +; Help +; +:tips_tweaks_general_plug: +> Some General Recommendations: +> +> + Use of a static IP address can help in certain cases. NFS shares are referenced by IP address. Be sure you reserve the IP address on your router, or set a very high IP address to prevent conflicts. +> + Use of Jumbo Frames is discouraged. Jumbo Frames have been known to cause issues with some Dockers. +> + Don't set vm.dirty.ratio above 20% unless you have a UPS backup for your Unraid. You may lose data that has not been written to disk on a power failure. +> + A value of vm.dirty_background_ratio over 1/2 of vm.dirty_ratio is not recommended unless using single digits for both values. +:end + +:tips_tweaks_nic_flow_control_plug: +> Set to 'Yes' to disable NIC Flow Control. NIC Flow Control was originally implemented to help in +> networks with mixed speed devices. It doesn't seem to be as necessary on today's networks. If you +> have a managed switch, flow control can generally be turned on and off on the switch. If you have +> a consumer grade switch, you won't have that level of control. Flow Control has been known to create +> network issues in certain circumstances. It is recommended to disable Flow Control if you experience network issues. +> +> Changing from any setting to 'Default' requires a reboot. +:end + +:tips_tweaks_nic_offload_plug: +> Set to 'Yes' to disable NIC offloads. Offloads were developed to offload some network processing +> to the NIC and off the main CPU and deal with large packets. This was intended to save some CPU processing +> load and increase network throughput. TSO offload has been known to cause network issues in certain circumstances. +> It is recommended to disable NIC Offloads if you experience network issues. +> +> Changing from any setting to 'Default' requires a reboot. +:end + +:tips_tweaks_rx_buffer_plug: +> Select the size of the NIC Rx ring buffer. Some NICs have a limit on the size of the Rx ring buffer. The default value of 256 is recommended. +> +> Changing from any setting to 'Default' requires a reboot. +:end + +:tips_tweaks_tx_buffer_plug: +> Select the size of the NIC Tx ring buffer. Some NICs have a limit on the size of the Tx ring buffer. The default value of 256 is recommended. +> +> Changing from any setting to 'Default' requires a reboot. +:end + +:tips_tweaks_nics_plug: +> List the NICs to apply the above settings separated by commas. If you have multiple NICs that are bonded, be sure to include all of them. Flow Control, TSO, and NIC buffer settings will +> be applied to these NICs. +:end + +:tips_tweaks_dirty_background_plug: +> For streaming and gaming VMs, set the values low in the single digits. Recommended values are: vm.dirty_background_ratio=2% and vm.dirty_ratio=3%. +> If you have large amounts of RAM, smaller is better. +> Caution: Don't increase these values beyond the default settings unless you have a UPS that will reliably shut down Unraid. +> +> Set the 'vm.dirty_background_ratio' as a percentage of total RAM memory. +> The default setting of 10% is recommended in most cases. If you have a media streaming or gaming VM, use a value of 2%. If you experience OOM errors, it is recommended you set this to 1%. +:end + +:tips_tweaks_dirty_ratio_plug: +> Set the 'vm.dirty_ratio' as a percentage of total RAM memory. +> Setting this too high may cause Linux to terminate some processes to gain more memory. The default setting of 20% is recommended in most cases. If you have a media streaming or gaming VM, use a value of 3%. If you experience OOM errors, it is recommended you set this to 2%. +:end + +:tips_tweaks_max_watches_plug: +> If inotify fails to start because there are not enough user watches, increase the max_user_watches. +> +> The default is 524288. +:end + +:tips_tweaks_cpu_governor_plug: +> Select the CPU Scaling Governor you want to use. +> +> + "Power Save" - Default for the Intel Pstate driver. Scales CPU frequency based on load. +> + "On Demand" - Default for ACPI CPU Freq driver. Scales CPU frequency based on load. Frequency stepping is aggressive. +> + "Conservative" - Scales CPU frequency based on load. Frequency stepping is gentler. Can cause some latency. +> + "Performance" - Set all CPUs at full frequency regardless of load. This can have a positive influence on performance and latency. +> + "Schedutil" - Set all CPUs frequency scaling to schedutil. This sets CPU frequency based on the Linux scheduler. Note: This is still in development. +> + "Scheduled" - At start time set governor to "Performance". At stop time set governor to "Powersave" or "On Demand" depending on driver used. +> +> You can now set the CPU governor with the rc.tweaks script. Use the command: +> /usr/local/sbin/rc.tweaks set_governor 'governor' +> The 'governor' choices are: 'ondemand', 'performance', 'powersave', 'conservative', and 'schedutil'. +:end + +:tips_tweak_turbo_plug: +> Set to 'Yes' to enable the Intel Turbo or AMD Performance Boost Mode. +:end + +:tips_tweaks_performance_plug: +> Enter the time you want to set the governor to "Performance" in 24 hour format hh:mm. +:end + +:tips_tweaks_cpu_state_plug: +> Enter the time you want to set the governor to "Power Save" for Intel Pstate and Intel CPU Freq or "On Demand" in 24 hour format hh:mm. +:end + +:tips_tweaks_syslog_archive_plug: +> Set to 'Yes' to enable the capture and archive of syslogs and run a diagnostics on shutdown. Logs and diagnostics are saved to /boot/logs/. +:end + +:tips_tweaks_number_syslogs_plug: +> Set the number of syslogs to save in the archive. +> Set zero to save only last syslog. Set to -1 to save all logs. Default setting is 10. +:end + +:tips_tweaks_kill_processes_plug: +> Enter the names of processes to kill before stopping the array, separated by commas. For example, 'ssh' and 'bash'. These processes can keep the array disks from unmounting causing Unraid to hang when the array is being stopped. +> +> Note: Be careful with the processes you kill here. You could lose data! +:end + diff --git a/Unassigned Devices/editsettings.txt b/Unassigned Devices/editsettings.txt new file mode 100644 index 0000000..7d6aee0 --- /dev/null +++ b/Unassigned Devices/editsettings.txt @@ -0,0 +1,64 @@ +Click the 'Default' button to select the default Device Script File=Нажмите кнопку «По умолчанию», чтобы выбрать файл сценария устройства по умолчанию. +Default=По умолчанию +Delete Device Script File=Удалить файл сценария устройства +Device Script content=Содержимое сценария устройства +Disable Mount=Отключить монтирование +Disk Name=Имя диска +Edit Device Script=Изменить сценарий устройства +Enter Device Script File Name=Введите имя файла сценария устройства +Enter and Edit the Device Script that runs when a udev or operator event occurs= +Enter the User Script that will be using this device=Введите пользовательский сценарий, который будет использовать это устройство +Load the default Device Script=Загрузить сценарий устройства по умолчанию +Run in background=Запустить в фоновом режиме +Mount Device Read only= +Mount Device when Plugged in or Array is Started= +Mount ISO File when Array is Started= +Mount Remote SMB or NFS Share when Array is Started= +Run Device Script File in the background=Запустить файл сценария устройства в фоновом режиме +Save your Device Script File changes=Сохранить изменения в файле сценария устройства +Save=Сохранить +Share Device with SMB and NFS= +Share Remote Mount with SMB and NFS= +Mark this Device as passed through to a VM or Docker= +Unassigned Devices Settings=Настройки неназначенных устройств +Undo your changes since last Save=Отменить изменения с момента последнего сохранения +Volume=Том +; +; Help +; +:ud_edit_script_device_settings_plug: +> Select the options for this device/mount point. These changes are made immediately. You don't need to click **Save** to save them. +:end + +:ud_disk_name_plug: +> Enter the alias name for this device. This is the name you want to use to refer to this drive. Leave the name blank and the 'devX' will be assigned. +> +> **Name:** 8 characters max, spaces converted to '_', minimal special characters allowed, name is case sensitive. +> +> **Note:** Cannot contain "dev" as the first characters. This is reserved for the 'devX' devices. +:end + +:ud_apfs_volume_plug: +> Enter the volume to mount on this apfs partition. Click **Save** to commit this setting. +:end + +:ud_edit_script_choose_name_plug: +> This is the Script File that runs when the device is mounted. Choose your Script File name from the file selection dropdown, or enter your desired script. +:end + +:ud_edit_user_script_choose_name_plug: +> If you have the User Scripts plugin installed, you can have +Unassigned Devices show the running status of the User Script that +will be using this device. This field will only be enabled when a Device Script File exists. +:end + +:ud_edit_script_run_background_plug: +> Set to **Yes** to have the Device Script run as a background task. This can keep the Unassigned Devices UI from hanging when the script is run from the UI. +:end + +:ud_edit_script_buttons_plug: +> Click the **Save** button to commit the current edits. Click **Reset** to undo any changes you make (before Saving). Click **Done** to exit this page. +> +> Click the **Default** button to initialize the edit box with a Default Device Script. +> You still need to click **Save** in order to commit the change. +:end \ No newline at end of file diff --git a/Unassigned Devices/scriptlog.txt b/Unassigned Devices/scriptlog.txt new file mode 100644 index 0000000..82d6677 --- /dev/null +++ b/Unassigned Devices/scriptlog.txt @@ -0,0 +1 @@ +Script Log=Журнал сценариев diff --git a/Unassigned Devices/unassigneddevices.txt b/Unassigned Devices/unassigneddevices.txt new file mode 100644 index 0000000..a0ac65e --- /dev/null +++ b/Unassigned Devices/unassigneddevices.txt @@ -0,0 +1,200 @@ +Add ISO File Share= +Add Remote SMB= +Add Root Share= +An XFS or BTRFS disk partitioned in UD is compatible with the array disk partitioning and can be added to the array= +Any data on this disk will be lost= +Are you sure=Уверены ли вы +Auto mount= +Back=Назад +Browse Disk Share= +Browse ISO File Share= +Browse Remote SMB= +Choose File System Format= +Choose ISO File=Выберите ISO-файл +Choose Server=Выберите сервер +Choose Share= +Click on Icon to Choose Protocol=Нажмите на значок, чтобы выбрать протокол +Change Disk Mount Point=Изменить точку монтирования диска +Change ISO File Mount Point=Изменить точку монтирования ISO-файла +Change Remote Share Mount Point= +Change SMB= +Changing the Mount Point will also change the disk label=Изменение точки монтирования также изменит метку диска +Click to select ISO file= +Click to view/hide partitions and mount points= +Complete= +Disks=Диски +Disk Label=Метка диска +Disk Log Information=Информация журнала диска +Disk Sharing must be disabled to add a Root Share= +Do NOT use a remote share local mount in a Docker container or VM for critical data= +Do not put files or folders into the /mnt/rootshare/ folder= +Domain=Домен +Edit Device Script=Изменить сценарий устройства +Edit ISO File Script=Изменить сценарий ISO-файла +Edit Remote SMB= +Enter the Domain for the share if on a Domain= +Enter the Password if the share is password protected= +Enter the Username if the share is password protected= +Enter the password to use for this disk= +Execute Script as udev simulating a device being installed= +Fail= +file share for= +File System Check=Проверка файловой системы +File System Scrub= +Format=Формат +Formatting=Форматирование +Free=Свободно +from disk=с диска +Go to Settings->Global Share Settings and set Enable Disk Shares to Auto or Off= +Historical Devices= +If this disk was pre-cleared, you will remove the pre-clear signature. +If you add the disk to the array and the pre-clear signature is removed, Unraid will go through the lengthy process of clearing the disk again= +ISO File is= +ISO File Shares= +Identification=Идентификация +If using a disk password be sure to enter the password for this disk in UD Settings so it can be mounted= +Device=Устройство +Leave blank to use the array passwordpassphrase= +Load Shares= +Loading=Загрузка +Log=Журнал +Mount= +Mounting= +NFS Mount Point= +NFS or ISO File Shares configured= +NFS Script= +NFS Share= +NFS Shares= +Next=Дальше +No Remote SMB= +No Unassigned Disks available=Нет доступных неназначенных дисков +not installed=не установлено +Note=Примечание +You must enable NFS in Settings->NFS to mount NFS shares= +You must enable SMB in Settings->SMB to mount SMB shares= +Open=Открыть +Partition and Format Disk=Разбиение на разделы и форматирование диска +Pass Thru= +Password=Пароль +Read only=Только чтение +Refresh Disks and Configuration=Обновить диски и конфигурацию +Remember your password It cannot be recovered=Запомните свой пароль, его невозможно восстановить +Remote Share is= +Remote share mounts are dependent on a solid and reliable network connection and that is difficult to achieve= +Remove Device configuration=Удалить конфигурацию устройства +Remove ISO File Share= +Remove Partition=Удалить раздел +Remove Remote SMBNFS Share= +Remove partition=Удалить раздел +Run with CORRECT flag= +Running= +Shares= +Script=Сценарий +Search For Servers=Поиск серверов +Search for Servers, or enter the Server nameIP address manually= +Search for Shares or enter the Share name manually= +Searching=Поиск +Select the Mount Point to Root Share= +Serial Number Mountpoint= +share for= +Simple= +SMB Shares= +Source=Источник +SSD cannot be spun down= +Success= +Show Historical Devices= +Show SMB/NFS/ISO Shares= +Show Disk Devices= +This is a way to gather Unraid shares into one Root Share= +This will remove the ISO file share for= +This will remove the remote= +This will remove the saved configuration of= +This will remove the= +to confirm= +to format= +Unmount= +Unmounting= +Use caution when gathering shares into one Root Share= +Used= +User and Pool Shares= +User Shares= +Username=Имя пользователя +View Device Script Log= +View ISO File Script Log= +View Remote SMB= +When you copy files between shares in the Root Share, the files may not end up on the expected disks= +NFS Script Log= +You can also subject yourself to security issues like ransomware by exposing all your shares in one Root Share= +You must enable NFS in Settings->NFS to mount NFS shares= +You must enable SMB in Settings->SMB to mount SMB shares= +You must enable the Destructive Mode in UD Settings before you can Format this disk= +WARNING= +You WILL have problems if you do= +You will need to enter credentials to list the shares= + +; Help +; +:unassgned_devices_switches_plug: +> Turn on the **Disks** switch to change the web page to show disk devices. Turn off the **Disks** switch to change the web page to hide disk devices. +> +> Turn on the **Shares** switch to change the web page to show shares. Turn off the **Shares** switch to change the web page to hide shares. +> +> Turn on the **Historical** switch to show Historical disk devices. Turn off **Historical** switch to switch back to not show Historical disk devices. +> +> Click on the icon to refresh disks and configuration. +> +> Click on the icon to go to the UD Settings. +> +> You can spin a disk up or down by clicking on the disk ball or indicator. Applies to version 6.9 RC2 and later only. +:end + +:unassigned_devices_general_help_plug: +> **Unassigned Devices is called UD for short.** +> +> Hover your mouse over an any active area on the UD page and a tool tip will show you what clicking that area does. +> You can mount USB devices, sata drives, Remote SMB/NFS shares, and ISO Files with UD. Any devices with the auto mount switch on will be mounted when the array is started. All drives and SMB/NFS Mounts are unmounted when the array is stopped on the 'stopping_svcs' event. +> If you want to share your drive, you can turn on the Share switch. The default for Remote SMB shares is Public read/write access. Enable SMB Security by user in the Unassigned Devices Settings. NFS shares are exported and access is read/write. The export of NFS devices is enabled in the Unassigned Devices settings. You can also enable a common script that will be executed on every disk mount. In order to share any UD device, sharing needs to be enabled in the UD Settings and the switch turned on to share the particular device. SMB/NFS remove shares and ISO mounts are always shared. +> After entering a mount point, press <Enter> to save the change. +> +> Additional options are available when you click on the icon by device identification. When the disk is unmounted, the mount point of the device can be changed. The disk label will also be changed. A disk can be formatted and an fsck run to check the disk. +> +> The 'Settings->Unassigned Devices' security settings for SMB and NFS must be set correctly for SMB and NFS sharing to work properly. +> +> If the mount button is grayed out for a SMB/NFS remote share, the remote server is not responding to a ping. The remote share server must respond to a ping or UD will consider it off-line. +> +> The 'Add Root Share' button is disabled when 'Enable disk shares' is enabled and any Root Shares previously added will not mount. +> +> UD has a destructive mode that allows deleting disk partitions and formatting disks. If Destructive Mode is not turned on in the UD Settings, you WILL NOT be able to format a disk or remove partitions. Go the the 'Settings->Unassigned Devices' to set the destructive mode. +> +> **To format a disk:** +> +> + Destructive mode must be enabled. +> + Disk must have all partitions removed. Unmount disk, click on the icon,, and click on all icons to delete partitions. +> + If the disk has been precelared and shows a grayed 'Format' button, click on the icon, then click on the icon to delete the preclear status file. +> +> **Note: A disk partitioned in UD is compatible with the array disk partitioning and can be added to the array. Supported file formats are XFS, XFS encrypted, BTRFS and BTRFS encrypted.** +> +> **Encrypted Disks:** +> +> + Any disk formatted in UD that is encrypted will use the array password/passphrase and can be incorporated into the array. Or you can set a unique password when it is formatted. If you set a password on the disk when it is formatted, you will need to enter a disk password in Unassignd Devices->Settings for that disk. +> + Any disk that was not encrypted with the Array password/passphrase can be mounted by setting a per disk passord set in Unassigned Devices->Settings. +> +> **Unassigned devices script:** +> +> UD includes a script that is used for mounting and unmounting devices and SMB/NFS mounts. These scripts can be used from the command line or in your scripts as necessary. +> +> + '/usr/local/sbin/rc.unassigned mount autodevices' - all devices set to auto mount will be mounted. +> + '/usr/local/sbin/rc.unassigned mount autoshares' - all SMB/NFS mounts set to auto mount will be mounted. +> + '/usr/local/sbin/rc.unassigned umount auto' - all devices and SMB/NFS mounts set to auto mount will be unmounted. +> + '/usr/local/sbin/rc.unassigned umount all' - all devices and SMB/NFS mounts are unmounted in preparation for shutting down the array. +> + '/usr/local/sbin/rc.unassigned mount /dev/sdX or devX' - mount device sdX where 'X' is the device designator. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to mount. +> + '/usr/local/sbin/rc.unassigned mount name=diskname' - mount device by disk name. +> + '/usr/local/sbin/rc.unassigned umount /dev/sdX or devX' - unmount device sdX where 'X' is the device designator. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to unmount. You can use this command in a UD script to unmount the device when the script has completed. +> + '/usr/local/sbin/rc.unassigned umount name=diskname' - unmount device by disk name. +> + '/usr/local/sbin/rc.unassigned spindown devX' - spin down a disk. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to spin down. SSDs will not spin down. +> + '/usr/local/sbin/rc.unassigned spindown name=diskname' - spin down a disk by disk name. +> + '/usr/local/sbin/rc.unassigned mount SOURCE' - where SOURCE is the SMB/NFS source. +> + '/usr/local/sbin/rc.unassigned umount SOURCE' - where SOURCE is the SMB/NFS source. +> +> Be careful using the /dev/sdX designation because it can change after a reboot. +:end diff --git a/Unassigned Devices/unassigneddevicessettings.txt b/Unassigned Devices/unassigneddevicessettings.txt new file mode 100644 index 0000000..06e2de1 --- /dev/null +++ b/Unassigned Devices/unassigneddevicessettings.txt @@ -0,0 +1,131 @@ +Add=Добавить +Auto Mount USB Devices= +Change Disk UUID=Изменить UUID диска +Change UUID=Изменить UUID +Change the disk UUID=Смена UUID диска +Common Script=Общий сценарий +Common Settings=Общие настройки +Destructive Mode=Разрушительный режим +Disk spin down is managed by Unraid=Снижение скорости вращения диска управляется Unraid +Enable NFS export=Включить NFS экспорт +Enable SMB Security=Включить безопасность SMB +Enter Disk Password=Введите пароль к диску +Enter Pool Mount Point= +Legacy Mount Point Compatibility= +Mount SSDs with discard option= +NFS Security=Безопасность NFS +NFS Settings=Настройки NFS +NFS must be enabled in Settings->NFS to enable NFS Export= +NFS Version to use when Mounting Remote Shares= +Rule=Правило +SMB Security=Безопасность SMB +Select Disk=Выберите диск +Set Encrypted Disk Password= +Set Password=Установить пароль +Set Pool Mount Point= +Set the Pool Mount Point for this disk= +Set the disk Password=Установить пароль для диска +Specify SMB Version when Mounting Remote Shares= +Spin down disks= +The Unassigned Devices Plus plugin must be installed to enable Destructive Mode= +to SMB share config= +Unassigned Devices=Неназначенные устройства +Unraid 6.10 or later is required for NFSv4 support= +Use only when directed for support= + +; Help +; +:ud_settings_plus_plug: +> **Note:** The 'Unassigned Devices Plus' plugin must be installed in order to mount HFS+ and exFAT disk formats, and enable destructive mode. +:end + +:ud_settings_common_script_plug: +> If set, this script will run before the device script. The action is in the environment variable **$ACTION**. Be sure you reference all commands with their full path. +:end + +:ud_settings_destructive_plug: +> If enabled, this will allow you to erase and format partitions using Unassigned Devices. This cannot be enabled unless the 'Unassigned Devices Plus' plugin is installed. +:end + +:ud_settings_mount_usb_devices_plug: +> When set to **Yes**, will auto mount a new USB device and share it without user intervention. +:end + +:ud_settings_discard_plug: +> Mount SSDs that support discard with 'discard' option. If you are using the SSD Trim Settings to do a periodic trim of SSDs you can set this to **No**. +:end + +:ud_settings_symlinks_plug: +> Set to **Yes** to create symlinks for /mnt/remotes/ at /mnt/disks/. +> +> This is for backwards compatibility of VM and Docker Container mappings to the /mnt/disks/ mount point. +> You are encouraged to change your mappings to the /mnt/remotes/ mount point. +> +> If you do not need the backwards compatibility, leave it set to **No**. +:end + +:ud_settings_specify_smb_vers_plug: +> Set to **No** for Unassigned Devices to first try to mount remote shares by not setting the SMB version when mounting. +> +> Set to **Yes** for Unassigned Devices to only mount SMB remote shares specifying the SMB version. +> +> Some remote servers need to have the version specified. +:end + +:ud_settings_debug_level_plug: +> Setting a Debug Log Level adds additional logging in specific areas of UD for troubleshooting. +> +> Set to **None** to turn off debug logging. +> +> Set the Debug Log Level to a numeric value to debug a specific area of UD. +> +> **Note:** Don't leave the Debug Log Level on for extended periods of time. It can add a lot of log messages to the syslog. +:end + +:ud_settings_specify_nfs_vers_plug: +> Set to **NFSv3** to mount all NFS Remote Shares with NFSv3. +> +> Set to **NFSv4** to mount all NFS Remote Shares with NFSv4. +> +> All NFS remote shares will be mounted with the specified version. +:end + +:ud_settings_smb_security_plug: +> Set the user level of SMB Security. +> +> + Set to **Yes** to enable SMB Security on SMB shares. Set access by user to allow access and whether or not the user can write to the share. +> + Set to **Hidden** to enable SMB Security on SMB shares that will not be visible. Set access by user to allow access and whether or not the user can write to the share. +> + Set to **No** will share devices, SMB/NFS, and iso Mounts Public with read and write access. +:end + +:ud_settings_case_sensitive_plug: +> Controls whether filenames are case-sensitive. +> +> The default setting of **Auto** allows clients that support case sensitive filenames (Linux CIFSVFS) to tell the Samba server on a per-packet basis that they wish to access the file system in a case-sensitive manner (to support UNIX case sensitive semantics). No Windows system supports case-sensitive filenames so setting this option to auto is the same as setting it to No for them; however, the case of filenames passed by a Windows client will be preserved. This setting can result in reduced performance with very large directories because Samba must do a filename search and match on passed names. +> +> A setting of **Yes** means that files are created with the case that the client passes, and only accessible using this same case. This will speed very large directory access, but some Windows applications may not function properly with this setting. For example, if "MyFile" is created but a Windows app attempts to open "MYFILE" (which is permitted in Windows), it will not be found. +> +> A value of **Forced lower** is special: the case of all incoming client filenames, not just new filenames, will be set to lower-case. In other words, no matter what mixed case name is created on the Windows side, it will be stored and accessed in all lower-case. This ensures all Windows apps will properly find any file regardless of case, but case will not be preserved in folder listings. +:end + +:ud_settings_force_user_plug: +> There are times when permissions on SMB shares aren't handled as expected. Turning this feature on can help with those permissions. +> This applies to all devices mounted with Unassigned Devices. +> The down side is that it overrides Linux group permissions. If you are unsure about whether or not this is necessary, leave it enabled. +:end + +:ud_settings_nfs_shares_plug: +> Set to **Yes** to export NFS shares. Shares are exported Public with read and write access or Private with the rule you set. Access is controlled with permission settings on files and folders. +> +> **Note:** The normal rule used by UD is '*(sec=sys,rw,insecure,anongid=100,anonuid=99,all_squash)'. +:end + +:ud_settings_disk_pass_plug: +> Select the disk that you want to set a Password. This is the password for this disk only and does not affect the array password/passphrase. Leave password blank to use the array password/passphrase for luks encrypted disks. +:end + +:ud_settings_change_uuid_plug: +> Select the disk that you want to change the UUID. This is useful when a XFS formatted disk has been removed from the array and has the same UUID as an array disk. Drive must be unmounted to change the UUID. +> +> **Note:** Don't change the UUID of a pooled disk. +:end diff --git a/dashboard.txt b/dashboard.txt index 6056a40..4f8d6f6 100644 --- a/dashboard.txt +++ b/dashboard.txt @@ -1,106 +1,112 @@ -%s used of %s %s %%=%s used of %s (%s %%) ----= -Active tunnels= -Activity= -ago= -Airflow= -All Apps= -All VMs= -Battery charge= -BIOS dated= -Click to toggle details= -Completed= -Counters info= -Current operation %s on %s=Current operation %s on **%s** -custom image= -Data is invalid= -default image= -Docker Containers= +%s ago=%s тому назад +%s used of %s %s %%=%s используется из %s (%s %%) +10 s=10 c +30 s=30 c +1 m=1 м +2 m=2 м +Active tunnels=Активные туннели +Activity=Активность +ago=тому назад +Airflow=Охлаждение +All Apps=Все приложения +All VMs=Все ВМ +Battery charge=Заряд батареи +BIOS dated=BIOS датирован +Click to toggle CPU chart= +Click to toggle details=Нажмите, чтобы переключить детали +Completed=Завершенный +Counters info=Информация о счётчиках +Current operation %s on %s=Текущая операция %s на **%s** +custom image=изображение пользователя +Data is invalid=Данные недействительны +default image=изображение п умолчанию +Docker Containers=Докер-контейнеры Due in= -Elapsed time= -Errors info= +Elapsed time=Прошедшее время +Errors info=Информация об ошибках Estimated finish= -failed device= -Fan count= -FAN= -Finding %s error=Finding: **%s** error -Finding %s errors=Finding: **%s** errors -General info= -Go to cache settings= +failed device=вышедшее из строя устройство +Fan count=Количество кулеров +FAN=КУЛЕР +Finding %s error=Обнаружено: **%s** ошибка +Finding %s errors=Обнаружено: **%s** ошибок +General info=Общая информация Go to CPU pinning settings= -Go to disk settings= -Go to Docker settings= -Go to fan settings= -Go to identification settings= -Go to network settings= -Go to scheduler settings= -Go to Share settings= -Go to UPS settings= -Go to User settings= -Go to VM settings= -Go to VPN settings= +Go to disk settings=Перейти к настройкам диска +Go to Docker settings=Перейти к настройкам Docker +Go to fan settings=Перейти к настройкам кулеров +Go to identification settings=Перейти к настройкам идентификации +Go to network settings=Перейти к настройкам сети +Go to scheduler settings=Перейти к настройкам планировщика +Go to Share settings=Перейти к настройкам общих ресурсов +Go to UPS settings=Перейти к настройкам ИБП +Go to User settings=Перейти к настройкам пользователей +Go to VM settings=Перейти к настройкам ВМ +Go to VPN settings=Перейти к настройкам VPN Handshake= -has= +has=имеет healthy= heat warning= -Hide details= -in progress= -Inactive tunnels= -inactive= -Inbound= -invalid device= -invalid devices= -Last check completed on %s=Last check completed on **%s** -Last check incomplete on %s=Last check incomplete on **%s** -Last checked on %s=Last checked on **%s** -Maximum size= -Mode of operation= -Next check scheduled on %s=Next check scheduled on **%s** -No docker containers defined= -No running docker containers= -No running virtual machines= -No shares present= -No virtual machines defined= -Nominal power= -not received= -Outbound= -Overall Load= -Parity disk not present= -Parity disks not present= -Parity has not been checked yet= -Parity is degraded= -Power= -Put system to sleep= -Reboot the system= -Receive counters= -Received packets= -Runtime left= -Scheduled parity check is disabled= -Select Case Model= +Hide details=Скрыть детали +in progress=в процессе +Inactive tunnels=Неактивные туннели +inactive=неактивный +Inbound=Входящий +invalid device=недопустимое устройство +invalid devices=недопустимые устройства +Last check completed on %s=Последняя проверка завершена **%s** +Last check incomplete on %s=Последняя проверка не завершена **%s** +Last checked on %s=Последний раз проверено **%s** +Maximum size=Максимальный размер +Mode of operation=Режим работы +Network traffic=Сетевой трафик +Next check scheduled on %s=Следующая проверка запланирована на **%s** +No docker containers defined=Докер-контейнеры не определены +No running docker containers=Нет запущенных докер-контейнеров +No running virtual machines=Нет запущенных виртуальных машин +No shares present=Общие ресурсы отсутствуют +No virtual machines defined=Виртуальные машины не определены +Nominal power=Номинальная мощность +not received=не получено +Only PNG images are allowed=Допускаются только изображения в формате PNG! +Outbound=Исходящий +Overall Load=Общая нагрузка +Parity disk not present=Диск чётности отсутствует +Parity disks not present=Диски чётности отсутствуют +Parity has not been checked yet=Чётность ещё не проверена +Parity is degraded=Чётность ухудшена +Power=Резервное питание +Put system to sleep=Перевести систему в спящий режим +Reboot the system=Перезагрузить систему +Receive counters=Счетчики получения +Received packets=Полученные пакеты +Runtime left=Оставшееся время работы +Scheduled parity check is disabled=Запланированная проверка чётности отключена +Select Case Model=Выберите модель корпуса +Select time frame=Выберите временной интервал Share count %s with %s cache only and %s encrypted=Share count: %s with %s cache only and %s encrypted -Show details= -Show Information= -Shutdown the system= -SMART error= +Show details=Показать детали +Show Information=Показать информацию +Shutdown the system=Завершить работу системы +SMART error=Ошибка SMART +SMART health-check failed= SMART= -sn=s/n -Start the array= -Started only= -Stop the array= -This will put the system to sleep= -This will reboot the system= -This will shutdown the system= -This will start the array= -This will stop the array= -Transmit counters= -Transmitted packets= -UPS Load= -UPS status= -Usable size= -User count %s with %s unprotected=User count: %s with %s unprotected +sn=с/н +Start the array=Запустить массив +Started only=Только запущенные +Stop the array=Остановить массив +Temp=Температура +This will put the system to sleep=Это переведет систему в спящий режим +This will reboot the system=Это перезагрузит систему +This will shutdown the system=Это приведёт к завершению работы системы +This will start the array=Это запустит массив +This will stop the array=Это остановит массив +Transmit counters=Счётчики передачи +Transmitted packets=Переданные пакеты +UPS Load=Нагрузка ИБП +UPS status=Статус ИБП +Usable size=Используемый размер +User count %s with %s unprotected=Количество пользователей: %s, из которых %s не защищено utilization warning= -View Running Processes= -Virtual Machines= - -; New entries - 2021-03-14 -Temp= +View Running Processes=Просмотр запущенных процессов +Virtual Machines=Виртуальные машины diff --git a/docker.txt b/docker.txt index 3b44d85..fa0d6d9 100644 --- a/docker.txt +++ b/docker.txt @@ -1,138 +1,133 @@ -Access Mode= -Add another Path, Port, Variable, Label or Device= -Add Configuration= -Add= -Always= -App to Host= -Application= -apply update= +Access Mode=Режим доступа +Add another Path, Port, Variable, Label or Device=Добавить другой путь, порт, переменную, метку или устройство +Add Configuration=Добавить конфигурацию +Add=Добавить +Additional Requirements=Дополнительные требования +Always=Всегда +App to Host=От приложения к хосту +Application=Приложение +apply update=применить обновление Array must be Started to view Docker containers=Array must be **Started** to view Docker containers -Are you sure= -Autostart= -Back= -Backup= -Beta= -Books= -By= -Categories= -Check for Updates= -Cloud= -Config Type= -Configuration not found= -Connection Type= -Console shell command= -Container ID= -Container Path= -Container Port= -Container Size= -Container= -CPU Memory load= +Are you sure=Уверены ли вы +Autostart=Автозапуск +Back=Назад +Backup=Резервное копирование +Beta=Бета +Books=Книги +By=От +Categories=Категории +Check for Updates=Проверить обновления +Cloud=Облако +Config Type=Тип конфигурации +Configuration not found=Конфигурация не найдена +Connection Type=Тип соединения +Console shell command=Консольная оболочка команд +Container ID=ID контейнера +Container Path=Путь к контейнеру +Container Port=Порт контейнера +Container Size=Размер контейнера +Container=Контейнер +CPU Memory load=Загрузка процессора и памяти CPU Pinning= -Created= -Default Value= -Device= -Display= +Created=Создан +Crypto Currency=Криптовалюта +Default Value=Значение по умолчанию +Device=Устройство +Display=Отображать DNS= Docker Containers= Docker Hub URL= Docker Service failed to start= -Donation Link= -Donation Text= -Downloaders= -Edit Configuration= -Exited= -Extra Parameters= -Fixed IP address= -force update= +Downloaders=Загрузчики +Drivers=Драйверы +Edit Configuration=Изменить конфигурацию +Exited=Выход +Extra Parameters=Дополнительные параметры +Fixed IP address=Фиксированный IP-адрес +force update=принудительное обновление FTP= -Game Servers= +Game Servers=Игровые серверы healthy= -Hide Buttons= +Hide Buttons=Скрыть кнопки Hide docker allocations= Hide more settings= Home Automation= Host Path= Host Port= HT= -Icon URL= +Icon URL=URL-адрес значка Image ID= -Key= -Label= -latest= +Key=Ключ +Label=Метка Management= MediaApp= MediaServer= -Messenger= -Missing parameters= -Music= -Network Type= -No Docker containers installed= -of= +Messenger=Мессенджер +Missing parameters=Отсутствующие параметры +Music=Музыка +Network Type=Тип сети +No Docker containers installed=Контейнеры Docker не установлены +None Listed=Нет в списке +of=из orphan image= -Other= -Overview= -Path= -Pause All= -Photos= +Other=Прочие +Overview=Описание +Path=Путь +Pause All=Приостановить всё +Photos=Фотографии Port Mappings= -Port= +Port=Порт Post Arguments= -Privileged= -Productivity= -Project Page= -Proxy= -Pulling image= +Privileged=Привилегированный +Productivity=Продуктивность +Project Page=Страница проекта +Proxy=Прокси +Pulling image=Получаем образ +Read Me First=Сначала прочитай меня Read Only - Shared= Read Only - Slave= -Read Only= +Read Only=Только чтение ReadWrite - Shared=Read/Write - Shared ReadWrite - Slave=Read/Write - Slave rebuild ready= rebuilding= -Remove template= -Removing container= +Remove template=Удалить шаблон +Removing container=Удаление контейнера Removing orphan image= -Repository= -Required= -Resume All= -Save= -Select a template= -Select categories= +Repository=Репозиторий +Required=Необходимо +Reset sorting=Сбросить сортировку +Resume All=Возобновить всё +Save=Сохранить +Select a template=Выберите шаблон +Select categories=Выбрать категории Show docker allocations= -Show more settings= -Stable= -Start All= -starting up containers= -Stop All= -Stopping container= -Successfully removed container= +Show more settings=Показать дополнительные настройки +Stable=Стабильная +Start All=Запустить всё +starting up containers=запуск контейнеров +Stop All=Остановить всё +Stopping container=Остановка контейнера +Successfully removed container=Контейнер успешно удалён Successfully removed orphan image= -Successfully stopped container= -Support Thread= -Template repositories= -Template URL= -Template= -The command failed= -The command finished successfully= -TOTAL DATA PULLED= -Unknown action= -Update All= -update ready= -Value= -Variable= -Video= -Voip= +Successfully stopped container=Контейнер успешно остановлен +Support Thread=Тема на форуме +Template URL=URL шаблона +Template=Шаблон +The command failed=Команда не выполнена +The command finished successfully=Команда успешно завершена +TOTAL DATA PULLED=ВСЕГО ПОЛУЧЕНО +Total size=Общий размер +Unknown action=Неизвестное действие +Update All=Обновить всё +update ready=обновление готово +Value=Значение +Variable=Переменная +Video=Видео +Voip=VoIP Volume Mappings= wait= -Was this container created using this plugin= -Web= -WebUI= -Writable= - -; New entries - 2021-03-14 -Drivers= -Reset sorting= -Start Container After Install= - -; New entries - 2021-03-14 -Total size= +Was this container created using this plugin=Был ли этот контейнер создан с помощью этого плагина +Web=Интернет +WebUI=Веб-интерфейс +Writable=Возможность записи diff --git a/helptext.txt b/helptext.txt index 194ab33..944eb8c 100644 --- a/helptext.txt +++ b/helptext.txt @@ -1,20 +1,20 @@ :main_array_devices_help: -**Colored Status Indicator** the significance of the color indicator at the beginning of each line in *Array Devices* is as follows: +**Цветной индикатор состояния.** Значение цветного индикатора в начале каждой строки в *Массиве устройств* следующее: -Normal operation, device is active. +Нормальная работа, устройство активно. -Device is in standby mode (spun-down). +Устройство находится в режиме ожидания (spun-down). -Device contents emulated. +Содержимое устройства эмулируется. -Device is disabled, contents emulated. +Устройство отключено, содержимое эмулировано. -New device. +Новое устройство. -No device present, position is empty. +Устройство отсутствует, позиция пуста. -**Identification** is the *signature* that uniquely identifies a storage device. The signature -includes the device model number, serial number, linux device id, and the device size. +**Идентификация** — это *подпись*, которая однозначно идентифицирует устройство хранения. +Подпись включает в себя номер модели устройства, серийный номер, идентификатор устройства linux и размер устройства. **Temp.** (temperature) is read directly from the device. You configure which units to use on the [Display Preferences](Settings/DisplaySettings) page. We do not read the temperature of spun-down hard @@ -36,7 +36,7 @@ I/O drivers. Missing data due to unrecoverable array read errors is filled in on reconstruct (and we attempt to write this data back to the sector(s) which failed). Any unrecoverable write error results in *disabling* the disk. -**FS** indicates the file system detected in partition 1 of the device. +**ФС** указывает на файловую систему, обнаруженную в первом разделе устройства. **View** column contains a folder icon indicating the device is *mounted*. Click the icon to browse the file system. @@ -45,9 +45,9 @@ If "Display array totals" is enable on the [Display Preferences](Settings/Displa **Total** line is included which provides a tally of the device statistics, including the average temperature of your devices. -The Array must be Stopped in order to change Array device assignments. +Чтобы изменить назначения устройств массива, необходимо остановить массив. -An Unraid array consists of one or two Parity disks and a number of Data disks. The Data +An unRAID array consists of one or two Parity disks and a number of Data disks. The Data disks are exclusively used to store user data, and the Parity disk(s) provides the redundancy necessary to recover from disk failures. @@ -66,18 +66,18 @@ The minimum number of Array slots is 2, and you must have at least one device as :end :cache_devices_help: -**Colored Status Indicator** the significance of the color indicator at the beginning of each line in *Pool Devices* is as follows: +**Цветной индикатор состояния.** Значение цветного индикатора в начале каждой строки в *Устройства для пулов* следующее: -Normal operation, device is active. +Нормальная работа, устройство активно. -Device is in standby mode (spun-down). +Устройство находится в режиме ожидания (spun-down). -New device. +Новое устройство. -No device present, position is empty. +Устройство отсутствует, позиция пуста. -**Pool Devices** is a single device, or pool of multiple devices, *outside* the Unraid array. It may be exported for network access just -like an Array device. Being outside the Unraid array results in significantly faster write access. +**Pool Devices** is a single device, or pool of multiple devices, *outside* the unRAID array. It may be exported for network access just +like an Array device. Being outside the unRAID array results in significantly faster write access. There are two ways to configure the Pool devices: @@ -110,74 +110,73 @@ it may only be exported using SMB protocol. :end :array_status_help: -**Colored Status Indicator** the significance of the color indicator of the *Array* is as follows: +**Цветной индикатор состояния** значение цветового индикатора *массива* следующее: -Array is Started and Parity is valid. +Массив запущен, чётность действительна. -Array is Stopped, Parity is valid. +Массив запущен, чётность действительна. -Array is Started, but Parity is invalid. +Массив запущен, но чётность недействительна. -Array is Stopped, Parity is invalid. +Массив остановлен, чётность недействительна. :end :array_devices_help: -#### Assigning Devices +#### Назначение устройств -An unRAID disk array consists of a single parity disk and a number of data disks. The data -disks are exclusively used to store user data, and the parity disk provides the redundancy necessary -to recover from any singe disk failure. +An unRAID disk array consists of a number of Data disks and up to two Parity disks. The data +disks are exclusively used to store user data, and the Parity disk(s) provides the redundancy necessary +to recover from any single or double disk failure. Note that we are careful to use the term *disk* when referring to an array storage device. We use the term *hard drive* (or sometimes just *drive*) when referring to an actual hard disk drive (HDD) device. This is because in a RAID system it is possible to read/write an array disk whose corresponding hard drive is disabled or even missing! In addition, it is useful to be able to ask, "which device is -assigned to be the parity disk?"; or, "which device corresponds to disk2?". +assigned to be the Parity disk?"; or, "which device corresponds to disk2?". We therefore need a way to assign hard drives to array disks. This is accomplished here on the Main page when the array is stopped. There is a drop-down box for each array disk which lists all the unassigned devices. To assign a device simply select it from the list. Each time a device assignment is made, the system updates a configuration file to record the assignment. -#### Requirements +#### Требования -Unlike traditional RAID systems which stripe data across all the array devices, an unRAID server -stores files on individual hard drives. Consequently, all file write operations will involve both the -data disk the file is being written to, and the parity disk. For these reasons, +В отличие от традиционных RAID-систем, в которых данные распределяются по всем устройствам массива, сервер Unraid хранит файлы на отдельных жёстких дисках. +Следовательно, все операции записи файла будут включать как диск с данными, на который записывается файл, так и диск(и) чётности. +В силу этих причин, -* the parity disk size must be as large or larger than any of the data disks, +* размер диска чётности должен быть таким же или больше любого из дисков данных, -and +и -* given a choice, the parity disk should be the fastest disk in your collection. +* если есть выбор, диск(и) чётности должен быть самым быстрым диском(ами) в вашей коллекции. -#### Guidelines +#### Методические рекомендации -Here are the steps you should follow when designing your unRAID disk array: +Вот шаги, которые вы должны выполнить при проектировании дискового массива unRAID: -1. Decide which hard drive you will use for parity, and which hard drives you will use for -data disk1, disk2, etc., and label them in some fashion. Also, find the serial number of each hard -drive and jot it down somewhere; you will need this information later. +1. Решите, какой жесткий диск вы будете использовать для проверки четности и какие жесткие диски +вы будете использовать для данных disk1, disk2 и т.д., и пометьте их каким-либо образом. +Кроме того, найдите серийный номер каждого жесткого диска и где-нибудь запишите его; эта информация понадобится вам позже. -2. Install your hard drive devices, boot unRAID Server and bring up the webGui. If this is a fresh system -build, then the Main page will show no disks installed. This doesn't mean the system can't detect your -hard drives; it just means that none have been assigned yet. +2. Установите жесткие диски, загрузите ваш сервер и запустите webGUI. Если это новая сборка системы, +то на главной странице не будут установлены диски. Это не означает, что система не может обнаружить +ваши жесткие диски; это просто означает, что они ещё не назначены. -3. Remember the serial numbers you recored back in step 1? For parity and each data disk, select the -proper hard drive based on its serial number from the drop down list. +3. Помните серийные номера, которые вы записали на шаге 1? Для контроля четности и каждого диска с данными +выберите соответствующий жесткий диск на основе его серийного номера из раскрывающегося списка. -#### Hot Plug +#### Горячее подключение -You may also *hot plug* hard drives into your server if your hardware supports it. For example, -if you are using hard drive cages, you may simply plug them into your server while powered on and -with array Stopped. Refresh the Main page to have new unassigned devices appear in the assignment -dropdown lists. +Вы также можете *на горячую подключать* жёсткие диски к серверу, если ваше оборудование поддерживает это. +Например, если вы используете отсеки для жёстких дисков, вы можете просто подключить их к серверу при включенном питании и при остановленном массиве. +Обновите главную страницу, чтобы новые неназначенные устройства появились в раскрывающихся списках назначений. -#### Next Steps +#### Дальнейшие шаги -Once you have assigned all of your hard drives, refer to the Array Status section below -and Start the array. +После того, как вы назначили все свои жёсткие диски, перейдите в раздел «Состояние массива» ниже +и запустите массив. :end :encryption_help: @@ -246,13 +245,13 @@ A value of zero will disable the critical threshold (including notifications). **Balance** will run the *btrfs balance* program to restripe the extents across all pool devices, for example, to convert the pool from raid1 to raid0 or vice-versa. -When a *full balance* is perfomred, it basically rewrites everything in the current filesystem. +When a *full balance* is performed, it basically rewrites everything in the current filesystem. A *mode conversion* affects the btrfs data extents; metadata always uses raid1 and is converted to raid1 if necessary by any balance operation. The run time is potentially very long, depending on the filesystem size and speed of the device. -Unraid uses these default options when creating a multiple-device pool: +Unraid OS uses these default options when creating a multiple-device pool: `-dconvert=raid1 -mconvert=raid1` @@ -464,7 +463,6 @@ If no suffix, a count of 1024-byte blocks is assumed. **Special modes:** + SMB security mode displayed in *italics* indicates exported hidden user shares. -+ AFP security mode displayed in *italics* indicates exported time-machine user shares. + NFS does not have special modes for user shares. :end @@ -485,7 +483,6 @@ If no suffix, a count of 1024-byte blocks is assumed. **Special modes:** + SMB security mode displayed in *italics* indicates exported hidden disk shares. -+ AFP security mode displayed in *italics* indicates exported time-machine disk shares. + NFS does not have special modes for disk shares. :end @@ -523,7 +520,7 @@ This setting determines how Unraid OS will choose which disk to use when creatin **High-water** Choose the lowest numbered disk with free space still above the current *high water mark*. The -*high water mark* is initialized with the size of the largest data disk divided by 2. If no disk +*high water mark* is initialized with the size of the largest Data disk divided by 2. If no disk has free space above the current *high water mark*, divide the *high water mark* by 2 and choose again. The goal of **High-water** is to write as much data as possible to each disk (in order to minimize @@ -551,7 +548,7 @@ Determines whether a directory is allowed to expand onto multiple disks. **Automatically split any directory as required** When a new file or subdirectory needs to be created in a share, Unraid OS first chooses which disk it should be created on, according to the configured *Allocation method*. If the parent directory containing -the new file or or subdirectory does not exist on this disk, then Unraid OS will first create all necessary +the new file or subdirectory does not exist on this disk, then Unraid OS will first create all necessary parent directories, and then create the new file or subdirectory. **Automatically split only the top level directory as required** @@ -592,7 +589,7 @@ enough free space exists on the Cache disk/pool. If there is insufficient space on the Cache disk/pool, then new files and directories are created on the array. When the *mover* is invoked, files and subdirectories are transferred off the Cache disk/pool and onto the array. -**Only** indicates that all new files and subdirectories must be writen to the Cache disk/pool. +**Only** indicates that all new files and subdirectories must be written to the Cache disk/pool. If there is insufficient free space on the Cache disk/pool, *create* operations will fail with *out of space* status. *Mover* will take no action so any existing files for this share that are on the array are left there. @@ -651,7 +648,7 @@ The default setting of **auto** allows clients that support case sensitive filen to tell the Samba server on a per-packet basis that they wish to access the file system in a case-sensitive manner (to support UNIX case sensitive semantics). No Windows system supports case-sensitive filenames so setting this option to **auto** is the same as setting it to No for them; however, the case of filenames passed by a Windows client will be preserved. This setting can result -in reduced peformance with very large directories because Samba must do a filename search and match on passed names. +in reduced performance with very large directories because Samba must do a filename search and match on passed names. A setting of **Yes** means that files are created with the case that the client passes, and only accessible using this same case. This will speed very large directory access, but some Windows applications may not function properly with this setting. For @@ -668,11 +665,9 @@ Summary of security modes: **Public** All users including guests have full read/write access. -**Secure** All users including guests have read access, you select which of your users -have write access. +**Secure** All users including guests have read access, you select which of your users have write access. -**Private** No guest access at all, you select which of your users have read/write or -read-only access. +**Private** No guest access at all, you select which of your users have read/write, read-only access or no access. :end :smb_secure_access_help: @@ -706,28 +701,28 @@ Select the desired destinations and press **Write** to copy the NFS security set :end :user_add_username_help: -Usernames may be up to 40 characters long and must start with a **lower case letter** or an underscore, -followed by **lower case letters**, digits, underscores, or dashes. They can end with a dollar sign. +Имена пользователей могут содержать до 40 символов и должны начинаться со **строчной буквы** или символа подчеркивания, +за которым следуют **строчные буквы**, цифры, символы подчеркивания или тире. Могут заканчиваться знаком доллара. :end :user_add_description_help: -Up to 64 characters. The characters ampersand (&) quote (") and colon (:) are not allowed. +До 64 символов. Символы амперсанда (&), кавычки (") и двоеточия (:) недопустимы. :end :user_add_custom_image_help: -The image will be scaled to 48x48 pixels in size. The maximum image file upload size is 95 kB (97,280 bytes). +Изображение будет масштабировано до размера 48x48 пикселей. Максимальный размер загружаемого изображения составляет 95 КБ (97 280 байт). :end :user_password_help: -Up to 128 characters. +Используйте пароль до 128 символов :end :user_edit_description_help: -Up to 64 characters. The characters ampersand (&) quote (") and colon (:) are not allowed. +До 64 символов. Символы амперсанда (&), кавычки (") и двоеточия (:) недопустимы. :end :user_edit_custom_image_help: -The image will be scaled to 48x48 pixels in size. The maximum image file upload size is 512 kB (524,288 bytes). +Изображение будет масштабировано до размера 48x48 пикселей. Максимальный размер загружаемого изображения составляет 512 КБ (524288 байт). :end :cpu_vms_help: @@ -765,38 +760,38 @@ Usually this is not what a user wants when selecting multiple cores. CPU isolation allows the user to specify CPU cores that are to be explicitly reserved for assignment (to VMs or Docker containers). This is incredibly important for gaming VMs to run smoothly because even if you manually pin your Docker containers to not overlap with your gaming VM, -the host OS can still utilize those same cores as the guest VM needs for things like returning responses for the webGui, running a parity check, btrfs operations, etc. +the host OS can still utilize those same cores as the guest VM needs for things like returning responses for the webGUI, running a parity check, btrfs operations, etc. :end :timezone_help: -Select your applicable time zone from the drop-down list. +Выберите подходящий часовой пояс из раскрывающегося списка. :end :use_ntp_help: -Select 'Yes' to use Network Time Protocol to keep your server time accurate. -We **highly** recommend the use of a network time server, especially if you plan on using Active Directory. +Выберите **Да**, чтобы использовать протокол сетевого времени (NTP), чтобы время на сервере было точным. +Мы **настоятельно** рекомендуем использовать сетевой сервер времени, особенно если вы планируете использовать Active Directory. -Note: if using `pool.ntp.org` time servers, please also refer to [their documentation](http://www.pool.ntp.org/en/use.html). +Примечание: при использовании серверов времени `pool.ntp.org` также ознакомьтесь с их [документацией](http://www.pool.ntp.org/en/use.html). :end :ntp_server1_help: -This is the primary NTP server to use. Enter a FQDN or an IP address. +Основной NTP-сервер, который следует использовать. Введите полное доменное имя или IP-адрес. :end :ntp_server2_help: -This is the alternate NTP server to use if NTP Server 1 is down. +Альтернативный NTP-сервер, который следует использовать, если NTP-сервер 1 недоступен. :end :ntp_server3_help: -This is the alternate NTP Server to use if NTP Servers 1 and 2 are both down. +Альтернативный NTP-сервер, который следует использовать, если NTP-серверы 1 и 2 недоступны. :end :ntp_server4_help: -This is the alternate NTP Server to use if NTP Servers 1, 2, and 3 are all down. +Альтернативный NTP-сервер, который следует использовать, если NTP-серверы 1, 2 и 3 недоступны. :end :current_time_help: -Enter the current time-of-day. Use format YYYY-MM-DD HH:MM:SS. Greyed out when using NTP. +Введите текущее время суток. Используйте формат YYYY-MM-DD HH:MM:SS. Неактивен при использовании NTP. :end :disk_enable_autostart_help: @@ -812,12 +807,12 @@ page for that disk. :end :disk_spinup_groups_help: -If set to 'Yes' then the [Spinup Groups](/Help) feature is enabled. +If set to 'Yes' then the spinup groups feature is enabled. :end :disk_default_partition_format_help: Defines the type of partition layout to create when formatting hard drives 2TB in size and -smaller **only**. (All devices larger then 2TB are always set up with GPT partition tables.) +smaller **only**. (All devices larger than 2TB are always set up with GPT partition tables.) **MBR: unaligned** setting will create MBR-style partition table, where the single partition 1 will start in the **63rd sector** from the start of the disk. This is the *traditional* @@ -825,7 +820,7 @@ setting for virtually all MBR-style partition tables. **MBR: 4K-aligned** setting will create an MBR-style partition table, where the single partition 1 will start in the **64th sector** from the start of the disk. Since the sector size is 512 bytes, -this will *align* the start of partition 1 on a 4K-byte boundry. This is required for proper +this will *align* the start of partition 1 on a 4K-byte boundary. This is required for proper support of so-called *Advanced Format* drives. Unless you have a specific requirement do not change this setting from the default **MBR: 4K-aligned**. @@ -953,7 +948,8 @@ This section is used to set the global settings for all disks. It is possible to Use this field to add template repositories. Docker templates are used to facilitate the creation and re-creation of Docker containers. Please setup one per line. -For a list of popular community-supported repositories, visit here: http://lime-technology.com/forum/index.php?topic=37958.0 +Using repositories is deprecated. For instructions on how to have Community Applications utilize private repositories, visit here + :end :docker_enable_help: @@ -962,6 +958,10 @@ Before you can start the Docker service for the first time, please specify an im Once started, Docker will always automatically start after the array has been started. :end +:docker_timeout_help: +The time in seconds to allow a container to gracefully stop before forcing it to stop +:end + :docker_vdisk_type_help: Select where to keep the Docker persistent state. @@ -971,7 +971,7 @@ This can be an image file with a specific size or a dedicated folder. :docker_vdisk_size_help: If the system needs to create a new docker image file, this is the default size to use specified in GB. -To resize an existing image file, specify the new size here. Next time the Docker service is started the file (and file system) will increased to the new size (but never decreased). +To resize an existing image file, specify the new size here. Next time the Docker service is started the file (and file system) will be increased to the new size (but never decreased). :end :docker_vdisk_location_help: @@ -1088,170 +1088,197 @@ If repair is needed you should check the *Correct file system errors* and run a :end :id_server_name_help: -The network identity of your server. Also known as *hostname* or *short hostname*. Windows networking -refers to this as the *NetBIOS name* and must be 15 characters or less in length. -Use only alphanumeric characters (that is, "A-Z", "a-z", and "0-9"), dashes ("-"), and dots ("."); -and, the first and last characters must be alphanumeric. +Сетевой идентификатор вашего сервера. Также известен как *имя хоста* или *короткое имя хоста*. +В сети Windows это называется *NetBIOS-именем* и должно содержать не более 15 символов. +Используйте только буквенно-цифровые символы (то есть «A – Z», «a – z» и «0–9»), тире («-») и точки («.»); +и первый и последний символы должны быть буквенно-цифровыми. :end :id_description_help: -This is a text field that is seen next to a server when listed within Network or File Explorer -(Windows), or Finder (macOS). +Это текстовое поле, которое отображается рядом с сервером, если оно указано в сети, проводнике (Windows) +или Finder (macOS). :end :id_model_help: -This is the server model number. +Это номер модели сервера. :end :mgmt_start_page_help: -Select the page which is opened first when entering the GUI. By default the *Main* page is selected. +Выберите страницу, которая открывается первой при входе в графический интерфейс. По умолчанию выбрана *Главная* страница. :end :mgmt_use_telnet_help: -By default TELNET access is enabled. TELNET is an insecure type of CLI access however, -and it is highly recommended to use SSH access instead and disable TELNET access. +По умолчанию доступ по TELNET включён. Однако TELNET — это небезопасный тип доступа через интерфейс командной строки (CLI), +поэтому настоятельно рекомендуется вместо этого использовать доступ по SSH и отключить доступ по TELNET. :end :mgmt_telnet_port_help: -Enter the TELNET port, default port is 23. +Введите порт TELNET, порт по умолчанию - 23. :end :mgmt_use_ssh_help: -SSH is enabled by default and offers a secure way of CLI access. Upon system startup SSH keys are automatically generated -if not yet existing, and stored on the flash device in the folder */config/ssh*. +SSH включён по умолчанию и предлагает безопасный способ доступа через интерфейс командной строки (CLI). +При запуске системы автоматически генерируются SSH-ключи, если они еще не существуют, и сохраняются на флэш-накопителе в папке */config/ssh*. :end :mgmt_ssh_port_help: -Enter the SSH port, default port is 22. +Введите порт SSH, порт по умолчанию - 22. :end :mgmt_use_upnp_help: -Enable (default) or disable the UPnP function on the server. This function allows automatic forwarding of ports on the router, only applicable when UPnP is enabled on the router itself. +Включить (по умолчанию) или отключить функцию UPnP на сервере. Эта функция позволяет автоматически переадресовывает порты на маршрутизаторе, применима только в том случае, если на самом маршрутизаторе включена функция UPnP. :end :mgmt_use_ssl_tls_help: -Determines how the webGUI responds to HTTP and/or HTTPS protocol. +Определяет, как веб-интерфейс отвечает на протокол HTTP и/или HTTPS в вашей локальной сети. -Select **No** to disable HTTPS +Чтобы использовать HTTP, выберите **Нет**. Чтобы получить доступ к вашему серверу, используйте этот URL: -Select **Yes** to enable HTTPS and redirect HTTP to HTTPS. If a Let's Encrypt SSL certificate has not -been provisioned, then an automatically generated self-signed SSL certificate will be used. +`http://.` -Select **Auto** if you are using or plan to use a Let's Encrypt SSL certificate provisioned -by Lime Technology. Before the certificate is provisioned, the webGUI remains -in http-mode. After provisioning, the webGUI automatically switches to https-mode. In addition -two background processes are enabled: +или этот URL: -- *updatedns* - This starts 30 seconds after server reboot has completed and contacts the Lime Technology -DNS service to register the servers local IP address. Thereafter it wakes up every 10 minutes in case -the local IP address has changed again. +`http://` -- *renewcert* - This starts 60 seconds after server reboot has completed and contacts the Lime Technology -certificate renewal service to determine if your Let's Encrypt SSL certificate needs to be renewed. -Thereafter it wakes up every 24 hours. If within 30 days of expiration, a new certificate is automatically -provisioned and downloaded to your server. +Выберите **Да**, чтобы разрешить использование автоматически сгенерированного самозаверяющего сертификата SSL. +Используйте этот URL для доступа к вашему серверу: -Note: After provisioning a Let's Encrypt SSL certificate you may turn off the *updatedns* and *newcert* -background processes by changing this field to **Yes**. +`https://.` -**nginx certificate handling details** +Обратите внимание, что при использовании самоподписанного SSL-сертификата +браузер выдаёт предупреждение. -The nginx startup script looks for a SSL certificate on the USB boot flash in this order:
-`config/ssl/certs/certificate_bundle.pem`
-`config/ssl/certs/_unraid_bundle.pem` +Select **Strict** to enable *exclusive* use of an Unraid.net SSL +certificate for https access (see **Provision** below). Note that a DNS +server must be reachable. -If neither file exists, a self-signed SSL certificate is automatically created and stored in
-`config/ssl/certs/_unraid_bundle.pem`
+Important: **Strict** may not be selectable if your router or upstream DNS server has +[DNS rebinding protection](https://en.wikipedia.org/wiki/DNS_rebinding) enabled. DNS rebinding +protection prevents DNS from resolving a private IP network range. DNS rebinding protection is meant as +a security feature on a LAN that may include legacy devices with buggy/insecure "web" interfaces. -Provisioning a Let's Encrypt certificate writes the certificate to
-`config/ssl/certs/certificate_bundle.pem`
+One source of DNS rebinding protection could be your ISP DNS server. In this case the problem may be solved by +switching to a different DNS server such as OpenDNS where DNS rebinding proection can be turned off. -**nginx stapling support** +More commonly, DNS rebinding protection could be enabled in your router. Most consumer routers do not implement DNS +rebinding protection; but, if they do, a configuration setting should be available to turn it off. -Whether nginx enables OCSP Staping is determined by which certificate is in use:
-`config/ssl/certs/certificate_bundle.pem` => Yes
-`config/ssl/certs/_unraid_bundle.pem` => No +Higher end routers usually do enable DNS rebinding protection. Typically there are ways of turning it off +entirely or selectively based on domain. Examples: + +**DD-WRT:** Если вы используете *dnsmasq* с включённой защитой от повторного связывания DNS, +вы можете добавить эту строку в файл конфигурации вашего маршрутизатора: + +`rebind-domain-ok=/myunraid.net/` + +**pfSense:** Если вы используете внутреннюю службу DNS-преобразователя pfSense, вы можете добавить эти строки настраиваемых параметров: + +`server:`
+`private-domain: "myunraid.net"` + +**Ubiquiti USG router:** вы можете добавить следующую строку конфигурации: + +`set service dns forwarding options rebind-domain-ok=/myunraid.net/` + +**OpenDNS:** Go to Settings -> Security and *remove* the checkbox next to + "Suspicious Responses - Block internal IP addresses". It is an all-or-nothing setting. + +When all else fails, you may be able create an entry in your PC's *hosts* file to override external DNS and +directly resolve your servers myunraid.net FQDN to its local IP address. :end :mgmt_http_port_help: -Enter the HTTP port, default port is 80. +Введите порт HTTP, порт по умолчанию — 80. :end :mgmt_https_port_help: -Enter the HTTPS port, default port is 443. +Введите порт HTTPS, порт по умолчанию — 443. :end :mgmt_local_tld_help: -Enter your local Top Level Domain. May be blank. +Введите свой локальный домен верхнего уровня. Можно оставить пустым. :end :mgmt_certificate_expiration_help: -**Provision** may be used to allocate a *free* SSL Certficiate from [Let's Encrypt](https://letsencrypt.org/) and -then upload to your server. Note: We **highly** recommend using a static IP address in this case. +**Provision** may be used to install a *free* Unraid.net SSL Certificate from +[Let's Encrypt](https://letsencrypt.org/). -**Update DNS** may be used to manually initiate updating the DNS A-record of your server FQDN on unraid.net. Note -that DNS propagation change could take anywhere from 1 minute to several hours (we set TTL to 60 seconds). +The Unraid.net SSL certificate can be used in two ways. First, +having the certificate present enables your server to respond to an +alternate URL of the form: -Note: **Provision** may fail if your router or upstream DNS server has -[DNS rebinding protection](https://en.wikipedia.org/wiki/DNS_rebinding) enabled. DNS rebinding -protection prevents DNS from resolving a private IP network range. DNS rebinding protection is meant as -a security feature on a local LAN which includes legacy devices with buggy/insecure "web" interfaces. +`https://..myunraid.net` -One source of DNS rebinding protection could be your ISP DNS server. In this case the problem may be solved by -switching to a different DNS server such as Google's public DNS. +The `` value is a 40-character hex string (160 bits) unique to +your server. A Lime Technology DDNS server will return your `` +in response to a DNS request on this URL. The certificate Subject is +set to `*..myunraid.net` thus validating the https connection. -More commonly, DNS rebinding protection could be enabled in your router. Most consumer routers do not implement DNS -rebinding protection; but, if they do, a configuration setting should be available to turn it off. +You may enable this URL exclusively on your LAN by setting **Use +SSL/TLS** to **Strict**. -Higher end routers usually do enable DNS rebinding protection however. Typically there are ways of turning it off -entirely or selectively based on domain. Examples: +The second use for an Unraid.net certificate is to enable secure +remote access available through the My Servers plugin feature. Note +that it is possible to use secure remote access in conjunction with +insecure local access. + +After an Unraid.net SSL Certificate has been installed, two +background services are activated while the server is signed in to unraid.net: -**DD-WRT:** If you are using "dnsmasq" with DNS rebinding protection enabled, you can add this line to your router -configuration file: +- *updatedns* - This starts 30 seconds after server reboot has completed and contacts the Lime Technology +DNS service to register the servers local IP address. Thereafter it wakes up every 10 minutes in case +the local IP address has changed. + +- *renewcert* - This starts 60 seconds after server reboot has completed and contacts the Lime Technology +certificate renewal service to determine if your Unraid.net SSL certificate needs to be renewed. +Thereafter it wakes up every 24 hours. If within 30 days of expiration, a new certificate is automatically +provisioned and downloaded to your server. -`rebind-domain-ok=/unraid.net/` +**Delete** may be used to delete the Unraid.net certificate file. -**pfSense:** If you are using pfSense internal DNS resolver service, you can add these Custom Option lines: +**nginx certificate handling details** -`server:`
-`private-domain: "unraid.net"` +nginx makes use of two certificate files stored on the USB flash boot device:
-**Ubiquiti USG router:** you can add this configuration line: +- a self-signed certificate: `config/ssl/certs/_unraid_bundle.pem` -`set service dns forwarding options rebind-domain-ok=/unraid.net/` +- an Unraid.net certificate: `config/ssl/certs/certificate_bundle.pem` -**OpenDNS:** Go to Settings -> Security and *remove* the checkbox next to - "Suspicious Responses - Block internal IP addresses". It is an all-or-nothing setting. +The self-signed SSL certificate file is automatically created when nginx +starts; and re-created if the server hostname or local TLD is changed. -When all else fails, you can create an entry in your PC's *hosts* file to override external DNS and -directly resolve your servers unraid.net FQDN to its local IP address. +**nginx stapling support** + +Whether nginx enables OCSP Staping is determined by which certificate is in use:
+`config/ssl/certs/certificate_bundle.pem` => Yes
+`config/ssl/certs/_unraid_bundle.pem` => No :end :ftp_server_help: -Enable or disable the FTP server daemon. By default the FTP server is enabled. -This setting is not saved, i.e. upon system reboot it will revert to its default setting. +Включить или выключить службу FTP-сервера. По умолчанию FTP-сервер включён. +Этот параметр не сохраняется, т.е. при перезагрузке системы он возвращается к значению по умолчанию. :end :ftp_users_help: -Enter the user names (separated by spaces) permitted to access the server using FTP. -To disallow any user access, clear this setting. +Введите имена пользователей (через пробелы), которым разрешён доступ к серверу по FTP. +Чтобы запретить доступ любому пользователю, снимите этот флажок. -**Note:** do not enter user name `root` since this may cause problems in the future. +**Примечание:** не вводите имя пользователя `root`, так как это может вызвать проблемы в будущем. :end :ftp_overview_help: -### Overview +### Обзор -Unraid includes the popular `vsftpd` FTP server. The configuration of `vsftp` is currently very -simple: **All** user names entered above are permitted to access the server via FTP and will have -*full read/write/delete access* to the entire server, so use with caution. +Unraid OS включает в себя популярный FTP-сервер vsftpd. +Конфигурация `vsftp` в настоящее время очень проста: **Все** имена пользователей, введенные выше, имеют доступ к серверу через FTP и будут иметь *полный доступ для чтения/записи/удаления* ко всему серверу, +поэтому используйте его с осторожностью. :end :smb_enable_help: -Select 'Yes (Workgroup)' to enable SMB (Windows Networking) protocol support. This -also enables Windows host discovery. +Выберите **Да (Рабочая группа)**, чтобы включить поддержку протокола SMB (Windows Networking). +Это также позволяет обнаруживать хосты Windows. -Select 'Yes (Active Directory)' to enable Active Directory integration. +Выберите **Да (Active Directory)**, чтобы включить интеграцию с Active Directory. :end :smb_hide_files_help: @@ -1262,6 +1289,12 @@ in Windows Folder Options. If set to 'No' then dot files will appear in folder lists the same as any other file. :end +:smb_multi_channel_help: +When set to 'Yes' enables SMB Multi Channel support in the server. From +[microsoft](https://docs.microsoft.com/en-us/azure-stack/hci/manage/manage-smb-multichannel): +"SMB Multichannel enables file servers to use multiple network connections simultaneously." +:end + :smb_enhanced_macos_help: When set to 'Yes' provides enhanced compatibility with Apple SMB clients, resulting, for example, in faster Finder browsing, and ability to export Time Machine shares. This may cause some issues with Windows clients, however. @@ -1269,8 +1302,8 @@ Please also refer to the [VFS_FRUIT MAN PAGE](https://www.mankier.com/8/vfs_frui :end :smb_enable_netbios_help: -Select 'Yes' to enable NetBIOS. If enabled, SMBv1 protocol will also be recognized. If disabled, -clients must use SMBv2 or higher. +Выберите **Да**, чтобы включить NetBIOS. Если этот параметр включен, протокол SMBv1 также будет распознаваться. +Если этот параметр отключён, клиенты должны использовать SMBv2 или более позднюю версию :end :smb_enable_wsd_help: @@ -1294,16 +1327,16 @@ undo any changes you make (before Saving). Click **Done** to exit this page. :end :smb_workgroup_help: -Enter your local network Workgroup name. Usually this is "WORKGROUP". +Введите имя вашей рабочей группы в локальной сети. Обычно это "WORKGROUP". :end :smb_local_master_help: -If set to 'Yes' then the server will fully participate in browser elections, and in the absense +If set to 'Yes' then the server will fully participate in browser elections, and in the absence of other servers, will usually become the local Master Browser. :end :nfs_enable_help: -Select 'Yes' to enable the NFS protocol. +Выберите **Да**, чтобы включить протокол NFS. :end :nfs_tunable_fuse_remember_help: @@ -1422,17 +1455,37 @@ Choose if stopping the array needs a confirmation checkbox. :end :display_settings_help: -The display settings below determine how items are displayed on screen. Use these settings to tweak the visual effects to your likings. +Приведенные ниже параметры отображения определяют способ отображения элементов на экране. Используйте эти настройки, чтобы настроить визуальные эффекты по своему вкусу. -You can experiment with these settings as desired, they only affect visual properties. +Вы можете поэкспериментировать с этими настройками по своему желанию, они влияют только на визуальные свойства. :end :display_font_size_help: -This is a per device setting +Изменяет размер шрифта в графическом интерфейсе. Это индивидуальная настройка для каждого устройства. +:end + +:display_tty_size_help: +Изменяет размер шрифта окон терминала. +:end + +:display_page_view_help: +Changes how certain pages are displayed. In **Tabbed** mode different sections will be displayed in different tabs, +while in **Non-tabbed** mode sections are displayed under each other. +:end + +:display_users_menu_help: +The Users Menu can be part of the header or part of the Settings menu. +You can move the Users Menu if insufficient space in the header is available to display all menus. +:end + +:display_listing_height_help: +**Automatic** : long listings are displayed as is, and the user needs to scroll the whole page to see the bottom + +**Fixed** : long listings are displayed in a window with a fixed size, user can scroll this window to see the bottom :end :display_wwn_device_id_help: -World Wide Name (WWN) is a unique identifier used for SAS attached devices. +Всемирное имя (WWN) - это уникальный идентификатор, используемый для устройств, подключенных к SAS. Select *Disabled* to suppress the appending of WWN to the device identification @@ -1448,30 +1501,30 @@ Overrule the default background color in the header. This can be used to match t :end :display_custom_banner_help: -Image will be scaled to 1920x90 pixels. The maximum image file upload size is 512 kB (524,288 bytes). +Изображение будет масштабировано до 1920x90 пикселей. Максимальный размер загружаемого файла изображения составляет 512 КБ (524 288 байт). :end :display_temperature_unit_help: -Selects the temperature unit for the disk temperature thresholds. Changing the unit will adjust the existing value in the disk temperature thresholds as appropriate. +Выбор единицы измерения температуры для порогов температуры диска. При изменении единицы измерения существующее значение пороговых значений температуры диска будет изменено соответствующим образом. -Make sure any newly entered values represent the selected temperature unit. +Убедитесь, что все вновь введённые значения соответствуют выбранной единице измерения температуры. :end :vms_enable_help: -Stopping the VM Manager will first attempt to shutdown all running VMs. After 60 seconds, any remaining VM instances will be terminated. +При остановке диспетчера виртуальных машин сначала будет предпринята попытка отключить все работающие виртуальные машины. Через 60 секунд все оставшиеся экземпляры ВМ будут остановлены. :end :vms_libvirt_volume_help: -This is the libvirt volume. +Это том Libvirt. :end :vms_libvirt_vdisk_size_help: -If the system needs to create a new libvirt image file, this is the default size to use specified in GB. -To resize an existing image file, specify the new size here. Next time the Libvirt service is started the file (and file system) will increased to the new size (but never decreased). +Если системе необходимо создать новый файл образа Libvirt, это размер по умолчанию для использования, указанный в ГБ. +To resize an existing image file, specify the new size here. Next time the Libvirt service is started the file (and file system) will be increased to the new size (but never decreased). :end :vms_libvirt_location_help: -You must specify an image file for Libvirt. The system will automatically create this file when the Libvirt service is first started. +Необходимо указать файл образа для Libvirt. Система автоматически создаст этот файл при первом запуске службы Libvirt. :end :vms_libvirt_storage_help: @@ -1479,26 +1532,34 @@ Specify a user share that contains all your VM subdirectories with vdisks :end :vms_libvirt_iso_storage_help: -Specify a user share that contains all your installation media for operating systems +Укажите общий ресурс пользователя, который содержит все ваши установочные носители для операционных систем :end :vms_virtio_driver_help: -Specify the virtual CD-ROM (ISO) that contains the VirtIO Windows drivers as provided by the Fedora Project. -Download the latest ISO from here: fedoraproject.org +Укажите виртуальный компакт-диск (ISO), содержащий драйверы VirtIO для Windows, предоставляемые проектом Fedora. +Скачать последний ISO-образ можно отсюда: fedoraproject.org -When installing Windows, you will reach a step where no disk devices will be found. There is an option to browse for drivers on that screen. -Click browse and locate the additional CD-ROM in the menu. Inside there will be various folders for the different versions of Windows. -Open the folder for the version of Windows you are installing and then select the AMD64 subfolder inside (even if you are on an Intel system, select AMD64). -Three drivers will be found. Select them all, click next, and the vDisks you have assigned will appear. +При установке Windows вы дойдете до этапа, на котором не будут найдены дисковые устройства. На этом экране есть возможность поиска драйверов. +Нажмите кнопку «Обзор» и найдите в меню дополнительный компакт-диск. Внутри будут разные папки для разных версий Windows. +Откройте папку для версии Windows, которую вы устанавливаете, а затем выберите внутри подпапку AMD64 (даже если вы работаете в системе Intel, выберите AMD64). +Будут найдены три драйвера. Выберите их все, нажмите кнопку «Далее», и появятся назначенные вами виртуальные диски. :end -:vms_network_bridge_help: -Select the name of the network bridge you wish to use as default for your VMs, -the setting 'virbr0' will let libvirt create a virtual bridge that utilizes NAT (network address translation) -and act as a DHCP server to hand out IP addresses to virtual machines directly. -More optional selections are present when virtual bridges are created under network settings. +:vms_network_source_help: +Select the name of the network you wish to use as default for your VMs. +You can choose between **'bridges'** created under network settings or +**'libvirt'** created with virsh command in the terminal. +The bridge **'virbr0'** and the associated virtual network **'default'** are +created by libvirt. +Both utilizes NAT (network address translation) and act as a DHCP server to hand out IP addresses to virtual machines directly. +More optional selections are present for bridges under network settings or for libvirt networks with the virsh command in the terminal. + +**If your are unsure, choose 'virbr0' as the recommended Unraid default.** -NOTE: You can also specify a network bridge on a per-VM basis. +NOTE: You can also specify a network source on a per-VM basis. + +**IMPORTANT: Neither Libvirt nor Unraid automatically brings up an interface that is assigned to a Libvirt network. +Before you use a Libvirt network, please go to Settings -> Network Settings and, if necessary, manually set the associated interface to up.** :end :vms_host_shutdown_help: @@ -1507,8 +1568,8 @@ the VM will be instructed to hibernate (if supported) otherwise it will attempt :end :vms_shutdown_timeout_help: -When shutting down the server, this defines how long to wait in seconds for *graceful* VM shutdown before forcing shutdown to continue. -NOTE: It's recommended to shut down guest VMs from within the VM. +При выключении сервера этот параметр определяет, как долго в секундах ждать *мягкого* отключения ВМ, прежде чем принудительное завершение работы продолжится. +ПРИМЕЧАНИЕ. Рекомендуется выключать гостевые виртуальные машины из самой виртуальной машины. :end :vms_acs_override_help: @@ -1517,20 +1578,20 @@ Typically it is sufficient to isolate *Downstream* ports. A hardware component may need the setting *Multi-function* or *Both* to further isolate different hardware functions.
A reboot is required for changes to this setting to take affect. -**Warning: use of this setting could cause possible data corruption with certain hardware configurations.** -Please visit the [Lime Technology forums](https://forums.unraid.net/forum/51-vm-engine-kvm) for more information. +**Внимание! Использование этого параметра может привести к повреждению данных при определенных конфигурациях оборудования.** +Пожалуйста, посетите [Lime Technology forums](https://forums.unraid.net/forum/51-vm-engine-kvm) чтобы получить больше информации. :end :vms_vfio_interupts_help: If your system doesn't support interrupt remapping, these can be enabled by allowing unsafe interrupts.
A reboot will be required for changes to this setting to take affect. -**Warning: use of this setting could cause possible data corruption with certain hardware configurations.** -Please visit the [Lime Technology forums](https://forums.unraid.net/forum/51-vm-engine-kvm) for more information. +**Внимание! Использование этого параметра может привести к повреждению данных при определенных конфигурациях оборудования.** +Пожалуйста, посетите [Lime Technology forums](https://forums.unraid.net/forum/51-vm-engine-kvm) чтобы получить больше информации. :end :vms_libvirt_log_help: -View the log for libvirt: /var/log/libvirt/libvirtd.log +Просмотр журнала для libvirt: /var/log/libvirt/libvirtd.log :end :vms_scrub_help: @@ -1543,116 +1604,116 @@ If repair is needed you should check the *Correct file system errors* and run a :end :eth_interface_description_help: -Use this optional field to provide addditional information about the purpose of the connection. +Используйте это необязательное поле, чтобы указать дополнительную информацию о цели соединения. :end :eth_mac_address_help: -This is the hardware address of the interface. -When tagging is enabled all VLANs on this interface will share the same hardware address. +Аппаратный адрес интерфейса. +Когда тегирование включено, все виртуальные локальные сети на этом интерфейсе будут использовать один и тот же аппаратный адрес. :end :eth_enable_bonding_help: -Bonding is a feature that combines multiple physical Ethernet interfaces into a single *bonded* interface named **bond0**. -This can be used to improve the connection redundancy and/or throughput of the system. -Different bonding modes are supported (see below), but some modes require proper switch support. +Связывание (Bonding) — это функция, объединяющая несколько физических сетевых интерфейсов в один *связанный* интерфейс с именем **bond0**. +Это может быть использовано для улучшения резервирования соединений и/или пропускной способности системы. +Поддерживаются различные режимы связывания (см. ниже), но для некоторых режимов требуется надлежащая поддержка коммутатора. :end :eth_bonding_mode_help: -**Mode 0 (balance-rr)**
-This mode transmits packets in a sequential order from the first available slave through the last. +**Режим 0 (balance-rr)**
+В этом режиме пакеты передаются в последовательном порядке от первого доступного подчиненного устройства до последнего. If two real interfaces are slaves in the bond and two packets arrive destined out of the bonded interface the first will be transmitted on the first slave and the second frame will be transmitted on the second slave. The third packet will be sent on the first and so on. This provides load balancing and fault tolerance. -**Mode 1 (active-backup) - default**
+**Режим 1 (active-backup) - По умолчанию**
This mode places one of the interfaces into a backup state and will only make it active if the link is lost by the active interface. Only one slave in the bond is active at an instance of time. A different slave becomes active only when the active slave fails. This mode provides fault tolerance. -**Mode 2 (balance-xor)**
+**Режим 2 (balance-xor)**
This mode transmits packets based on an XOR formula. Source MAC address is XOR'd with destination MAC address modula slave count. This selects the same slave for each destination MAC address and provides load balancing and fault tolerance. -**Mode 3 (broadcast)**
+**Режим 3 (broadcast)**
This mode transmits everything on all slave interfaces. This mode is least used (only for specific purpose) and provides only fault tolerance. -**Mode 4 (802.3ad)**
+**Режим 4 (802.3ad)**
This mode is known as *Dynamic Link Aggregation*. It creates aggregation groups that share the same speed and duplex settings. It requires a switch that supports IEEE 802.3ad dynamic link. Slave selection for outgoing traffic is done according to the transmit hash policy, which may be changed from the default simple XOR policy via the xmit_hash_policy option. -Note that not all transmit policies may be 802.3ad compliant, particularly inregards to the packet mis-ordering requirements of section 43.2.4 of the 802.3ad standard. +Note that not all transmit policies may be 802.3ad compliant, particularly in regards to the packet mis-ordering requirements of section 43.2.4 of the 802.3ad standard. Different peer implementations will have varying tolerances for noncompliance. -**Mode 5 (balance-tlb)**
+**Режим 5 (balance-tlb)**
This mode is called *Adaptive transmit load balancing*. The outgoing traffic is distributed according to the current load and queue on each slave interface. Incoming traffic is received by the current slave. -**Mode 6 (balance-alb)**
+**Режим 6 (balance-alb)**
This mode is called *Adaptive load balancing*. This includes balance-tlb + receive load balancing (rlb) for IPV4 traffic. The receive load balancing is achieved by ARP negotiation. The bonding driver intercepts the ARP Replies sent by the server on their way out and overwrites the src hw address with the unique hw address of one of the slaves in the bond such that different clients use different hw addresses for the server. -*Mode 1 (active-backup) is the recommended setting. Other modes allow you to set up a specific environment, but may require proper switch support. -Choosing a unsupported mode can result in a disrupted communication.* +*Рекомендуемым параметром является режим 1 (active-backup). Другие режимы позволяют настроить определенную среду, но могут потребовать надлежащей поддержки коммутатора. +Выбор неподдерживаемого режима может привести к нарушению связи.* :end :eth_bonding_members_help: -Select which interfaces are member of the *bonded* interface. By default eth0 is a member, while other interfaces are optional. +Выберите, какие интерфейсы являются членами *связанного* интерфейса. По умолчанию eth0 является членом, а другие интерфейсы необязательны. :end :eth_enable_bridging_help: -Bridging is a feature which creates a virtual bridge and allows VMs and Docker containers to communicate directly with the physical Ethernet port. -Both bonding and bridging can be combined to let VMs or containers communicate over a *bonded* interface. +Мост — это функция, которая создает виртуальный мост и позволяет виртуальным машинам и контейнерам Docker связываться напрямую с физическим портом Ethernet. +И связывание, и мост можно комбинировать, чтобы позволить виртуальным машинам или контейнерам обмениваться данными через *связанный* интерфейс. :end :eth_bridging_members_help: -Select which interfaces are member of the *bridged* interface. By default eth0 is a member, while other interfaces are optional. +Выберите, какие интерфейсы являются членами интерфейса *bridged*. По умолчанию eth0 является членом, а другие интерфейсы необязательны. :end :eth_network_protocol_help: -Select which protocol(s) are used. By default IPv4 only is used.
-When both IPv4 and IPv6 is selected, each protocol can be configured independently. +Выберите, какие протоколы используются. По умолчанию используется только IPv4.
+Если выбраны и IPv4, и IPv6, каждый протокол может быть настроен независимо. :end :eth_ipv4_address_assignment_help: -The following settings are possible: +Возможны следующие параметры: -*Automatic* - the server will attempt to obtain a IPv4 address from the local DHCP server
-*Static* - the IPv4 address is manually set for this interface
-*None* - no IPv4 address is assigned to the interface (only available for VLANs) +*Автоматический* - сервер попытается получить IPv4-адрес от локального DHCP-сервера
+*Статический* - IPv4-адрес назначается вручную для этого интерфейса.
+*None* - интерфейсу не назначается IPv4-адрес (доступно только для VLAN) :end :eth_ipv4_address_help: -Greyed out when using automatic IP assignment. Otherwise specify here the IPv4 address and mask of the system. +Неактивен при использовании автоматического назначения IP-адресов. В противном случае укажите здесь IPv4-адрес и маску системы. :end :eth_ipv4_default_gateway_help: -Greyed out when using automatic IP assignment. Otherwise specify here the IPv4 address of your router. +Неактивен при использовании автоматического назначения IP-адресов. В противном случае укажите здесь IPv4-адрес вашего маршрутизатора. :end :eth_ipv4_dns_server_assignment_help: -If set to *Automatic* the server will use IPv4 DNS server(s) returned by the local automatic assignment.
-If set to *Static* you may enter your own list. +Если установлено значение *Автоматический*, сервер будет использовать IPv4 DNS-серверы, возвращенные локальным автоматическим назначением.
+Если установлено значение *Статический*, вы можете ввести свой собственный список. -This is useful in Active Directory configurations where you need to set the first DNS Server entry to the IP address of your AD Domain server. +Это полезно в конфигурациях Active Directory, где вам нужно установить первую запись DNS-сервера на IP-адрес вашего сервера домена AD. :end :eth_ipv4_dns_server_help: -This is the primary IPv4 DNS server to use. Enter a IPv4 address. +Это основной IPv4 DNS-сервер для использования. Введите IPv4-адрес. -Note: for *Active Directory* you **must** ensure this is set to the IP address of your AD Domain server. +Примечание: для *Active Directory* вы **должны** убедиться, что для этого параметра задан IP-адрес вашего сервера домена AD. :end :eth_ipv4_dns_server2_help: -This is the IPv4 DNS server to use when IPv4 DNS server 1 is down. +Это IPv4 DNS-сервер, который следует использовать, когда IPv4 DNS-сервер 1 недоступен. :end :eth_ipv4_dns_server3_help: -This is the IPv4 DNS server to use when IPv4 DNS servers 1 and 2 are both down. +Это IPv4 DNS-сервер, который следует использовать, когда оба IPv4 DNS-сервера 1 и 2 недоступны. :end :eth_ipv6_address_assignment_help: -The following settings are possible: +Возможны следующие параметры: *Automatic* - the server will attempt to obtain a IPv6 address from the local DHCP server or Router Advertisement (RA)
*Static* - the IPv6 address is manually set for this interface
@@ -1720,7 +1781,7 @@ or enter a valid IPv6 route in the format *nnnn:nnnn:nnnn::nnnn/xxx*, e.g. *fe80 Select the gateway from the dropdown list or enter a valid IPv4/IPv6 address as gateway value. -The metric value is optional, it defaults to 1. Use it to select the prefered gateway when more than one entry of the same route exist. +The metric value is optional, it defaults to 1. Use it to select the preferred gateway when more than one entry of the same route exists. :end :apc_ups_daemon_help: @@ -1734,7 +1795,7 @@ Defines the type of cable connecting the UPS to your computer.Possible generic c :end :apc_ups_custom_cable_help: -Specify a special cable by model number, only applicable when *UPS cable* is set to Custom. +Укажите специальный кабель по номеру модели. Это применимо только в том случае, если для параметра *Кабель ИБП* выбрано значение «Пользовательский». + 940-0119A, 940-0127A, 940-0128A, 940-0020B + 940-0020C, 940-0023A, 940-0024B, 940-0024C @@ -1743,52 +1804,52 @@ Specify a special cable by model number, only applicable when *UPS cable* is set :end :apc_ups_type_help: -Define a *UPS type*, which corresponds to the type of UPS you have (see the Description for more details). +Укажите *Тип ИБП*, который соответствует типу вашего ИБП (подробнее см. в описании). -+ **USB** - most new UPSes are USB -+ **APCsmart** - newer serial character device, appropriate for SmartUPS models using a serial cable (not USB) -+ **Net** - network link to a master apcupsd through apcupsd's Network Information Server. This is used if the UPS powering your computer is connected to a different computer for monitoring -+ **SNMP** - SNMP network link to an SNMP-enabled UPS device -+ **Dumb** - old serial character device for use with simple-signaling UPSes -+ **PCnet** - PowerChute Network Shutdown protocol which can be used as an alternative to SNMP with the AP9617 family of smart slot cards -+ **ModBus** - serial device for use with newest SmartUPS models supporting the MODBUS protocol ++ **USB** - большинство новых ИБП имеют USB ++ **APCsmart** - более новое последовательное символьное устройство, подходящее для моделей SmartUPS с использованием последовательного кабеля (не USB) ++ **Net** - сетевая ссылка на главный apcupsd через сетевой информационный сервер apcupsd. Это используется, если ИБП, питающий ваш компьютер, подключен к другому компьютеру для мониторинга. ++ **SNMP** - сетевой канал SNMP к ИБП с поддержкой SNMP ++ **Dumb** - старое последовательное символьное устройство для использования с ИБП с простой сигнализацией ++ **PCnet** - протокол PowerChute Network Shutdown, который можно использовать в качестве альтернативы SNMP с картами Smart Slot семейства AP9617. ++ **ModBus** - последовательное устройство для использования с новейшими моделями SmartUPS, поддерживающими протокол MODBUS :end :apc_ups_device_help: -Enter the *device* which correspondes to your situation, only applicable when *UPS type* is not set to USB. +Enter the *device* which corresponds to your situation, only applicable when *UPS type* is not set to USB. + **apcsmart** - /dev/tty** -+ **net** - hostname:port. Hostname is the IP address of the NIS server. The deafult port is 3551 -+ **snmp** - hostname:port:vendor:community. Hostname is the ip address or hostname of the UPS on the network. Vendor can be can be "APC" or "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap catching; you usually want "APC". Port is usually 161. Community is usually "private" ++ **net** - имя хоста: порт. Имя хоста — это IP-адрес NIS-сервера. Порт по умолчанию 3551 ++ **snmp** - имя хоста:порт:поставщик:сообщество. Имя хоста — это IP-адрес или имя хоста ИБП в сети. Поставщик может быть "APC" или "APC_NOTRAP". «APC_NOTRAP» отключит перехват SNMP-ловушек; вы обычно хотите «APC». Порт обычно 161. Сообщество обычно "private". + **dumb** - /dev/tty** + **pcnet** - ipaddr:username:passphrase:port. ipaddr is the IP address of the UPS management card. username and passphrase are the credentials for which the card has been configured. port is the port number on which to listen for messages from the UPS, normally 3052. If this parameter is empty or missing, the default of 3052 will be used + **modbus** - /dev/tty** :end :apc_battery_level_help: -If during a power failure, the remaining battery percentage (as reported by the UPS) is below or equal to *Battery level*, apcupsd will initiate a system shutdown. +Если во время сбоя питания оставшийся процент заряда батареи (по данным ИБП) ниже или равен *Уровню заряда батареи*, apcupsd инициирует отключение системы. :end :apc_runtime_left_help: -If during a power failure, the remaining runtime in minutes (as calculated internally by the UPS) is below or equal to this field, apcupsd, will initiate a system shutdown. +Если во время сбоя питания оставшееся время работы в минутах (рассчитываемое ИБП внутри) меньше или равно этому полю, apcupsd инициирует отключение системы. :end :apc_battery_time_help: If during a power failure, the UPS has run on batteries for *time-out* many seconds or longer; apcupsd will initiate a system shutdown. A value of zero disables this timer. -If you have a Smart UPS, you will most likely want to disable this timer by setting it to zero. -That way, your UPS will continue on batteries until either the % charge remaining drops to or below *Battery level* or the remaining battery runtime drops to or below *minutes*. +Если у вас есть Smart UPS, вы, скорее всего, захотите отключить этот таймер, установив его на ноль. +Таким образом, ваш ИБП будет продолжать работать от батарей до тех пор, пока % оставшегося заряда не упадет до или ниже *Уровень батареи* или оставшееся время работы от батарей не упадет до или ниже *минут*. -Of course - when testing - setting this to 60 causes a quick system shutdown if you pull the power plug. -If you have an older dumb UPS, you will want to set this to less than the time you know you can run on batteries. +Конечно, при тестировании установка этого параметра на 60 приводит к быстрому отключению системы, если вы выдернете вилку из розетки. +Если у вас есть старый тупой ИБП, вам нужно установить это значение меньше, чем время, которое вы знаете, что можете работать от батарей. :end :apc_note_help: -**Note:** *Battery level*, *Runtime left*, and *Time on battery* work in conjunction, so the first that occurs will cause the initiation of a shutdown. +**Примечание.** *Уровень заряда батареи*, *Оставшееся время работы* и *Время работы от батареи* взаимодействуют друг с другом, поэтому первое, что произойдет, вызовет выключение. :end :apc_killups_help: -Set to *Yes* to turn off the power to the UPS after a shutdown. +Установите значение *Да*, чтобы отключить питание ИБП после выключения. :end :parity_check_scheduled_help: @@ -1813,7 +1874,23 @@ When a **yearly** or **custom** schedule is selected then choose here the prefer :end :parity_write_corrections_help: -Choose here whether any parity errors found during the check, need to be corrected on the parity disk or not. +Choose here whether any parity errors found during the check, need to be corrected on the Parity disk or not. +:end + +:parity_cumulative_check_help: +Change this setting to **Yes** to divide long duration parity checks over multiple periods. This is useful when the system needs to be available and a parity check runs only during off hours. +:end + +:parity_accumulation_frequency_help: +Specifies how accumulation periods are executed. + +**Daily** means every subsequent day the parity check continues until finished + +**Weekly** means every subsequent week the parity check continues until finished +:end + +:parity_accumulation_duration_help: +Specifies how long each accumulated period runs, expressed in hours. The **Time of the day** speficies the start time of the period. :end :mover_schedule_help: @@ -1841,119 +1918,119 @@ Write mover messages to the syslog file. :end :notifications_display_help: -In *Detailed* view all notifications will be displayed on screen as soon as they arrive.
-Notifications can be acknowledged individually or all in once. +В *Подробном* представлении все уведомления будут отображаться на экране по мере их поступления.
+Уведомления могут быть подтверждены по отдельности или все сразу. -In *Summarized* view notifications will be counted only and the number of unread notifications is shown in the menu header per category.
-Click on the counters to either acknowledge or view the unread notifications. +В *Обобщённом* представлении будут учитываться только уведомления, а количество непрочитанных уведомлений отображается в заголовке меню для каждой категории.
+Щелкайте по счетчикам, чтобы подтвердить или просмотреть непрочитанные уведомления. :end :notifications_date_format_help: -Select the desired date format which is used in the notifications archive. Recommended is YYYY-MM-DD, which makes the date/time column sortable in a sensible way. +Выберите нужный формат даты, который используется в архиве уведомлений. Рекомендуется использовать формат ГГГГ-ММ-ДД, что позволяет удобно сортировать столбец даты/времени. :end :notifications_time_format_help: -Select the desired time format which is used in the notifications archive. Recommended is 24 hours, which makes the date/time column sortable in a sensible way. +Выберите желаемый формат времени, который используется в архиве уведомлений. Рекомендуется 24 часа, что делает столбец даты/времени удобным для сортировки. :end :notifications_display_position_help: -Choose the position of where notifications appear on screen. Multiple notifications are stacked, bottom-to-top or top-to-bottom depending on the selected placement. +Выберите положение, в котором уведомления будут появляться на экране. Несколько уведомлений располагаются друг над другом, снизу вверх или сверху вниз в зависимости от выбранного места размещения. :end :notifications_store_flash_help: -By default notifications are stored on RAM disk, which will get lost upon system reboot. -Notifications may be stored permanently on the flash drive under folder '/boot/config/plugins/dynamix' instead. +По умолчанию уведомления хранятся на RAM-диске и теряются при перезагрузке системы. +Вместо этого уведомления могут постоянно храниться на флэш-накопителе в папке "/boot/config/plugins/dynamix". :end :notifications_system_help: -By default the notifications system is disabled. Enable it here to start receiving notifications. -The following sections give more options about which and what type of notifications will be sent. +По умолчанию система уведомлений отключена. Включите её здесь, чтобы начать получать уведомления. +В следующих разделах приведены дополнительные параметры того, какие и какого типа уведомления будут отправлены. :end :notifications_os_update_help: -Start a periodic verification and notify the user when a new version of the Unraid OS system is detected. -Use the checkboxes below to select how notifications need to be given; by browser, by email and/or by custom agent. +Запускает периодическую проверку и уведомляет пользователя при обнаружении новой версии системы Unraid OS. +Используйте флажки ниже, чтобы выбрать способ отправки уведомлений; через браузер, по электронной почте и/или с помощью специального агента. :end :notifications_plugins_update_help: -Start a periodic verification and notify the user when a new version of one or more of the installed plugins is detected. -Use the checkboxes below to select how notifications need to be given; by browser, by email and/or by custom agent. +Запускает периодическую проверку и уведомляет пользователя при обнаружении новой версии одного или нескольких установленных плагинов. +Используйте флажки ниже, чтобы выбрать способ отправки уведомлений; через браузер, по электронной почте и/или с помощью специального агента. :end :notifications_docker_update_help: -Start a periodic verification and notify the user when a new version of one or more of the installed dockers is detected. -Use the checkboxes below to select how notifications need to be given; by browser, by email and/or by custom agent. +Запускает периодическую проверку и уведомляет пользователя при обнаружении новой версии одного или нескольких установленных докеров. +Используйте флажки ниже, чтобы выбрать способ отправки уведомлений; через браузер, по электронной почте и/или с помощью специального агента. :end :notifications_array_status_help: -Start a periodic array health check (preventive maintenance) and notify the user the result of this check. +Запускает периодическую проверку работоспособности массива (профилактическое обслуживание) и уведомляет пользователя о результате этой проверки. :end :notifications_agent_selection_help: -Use the checkboxes above to select what and how notifications need to be given; by browser, by email and/or by a service.
-Tip: you can use custom notification agents; just add them to "/boot/config/plugins/dynamix/notification/agents" directory and check 'Agents'. +Используйте флажки выше, чтобы выбрать, какие уведомления и как должны быть отправлены; через браузер, по электронной почте и/или через службу.
+Совет: вы можете использовать настраиваемые агенты уведомлений; просто добавьте их в каталог "/boot/config/plugins/dynamix/notification/agents" и проверьте "Агенты уведомлений". :end :notifications_classification_help: -Notifications are classified as: +Уведомления классифицируются следующим образом: -*notice* - these are informative notifications and do not indicate a problem situation, e.g. a new version is available
-*warning* - these are attentive notifications and may indicate future problems, e.g. a hard disk is hotter than usual
-*alert* - these are serious notifications and require immediate attention, e.g. a failing hard disk
+*уведомление* - это информационные уведомления, не указывающие на проблемную ситуацию, например, доступна новая версия
+*предупреждение* - это предупреждающие уведомления, которые могут указывать на будущие проблемы, например. жесткий диск нагревается сильнее, чем обычно
+*оповещение* - это серьёзные уведомления, требующие немедленного внимания, например, отказавший жёсткий диск
-Choose for each classification how you want to be notified. +Выберите для каждой классификации способ уведомления. :end :smtp_preset_service_help: -Select a preset service to set the basic service settings. +Выберите предустановленный сервис, чтобы задать основные настройки сервиса. :end :smtp_email_address_help: -Email address of your mail account. This address is used as sender of the notifications. +Адрес электронной почты вашего почтового аккаунта. Этот адрес используется для отправки уведомлений. :end :smtp_recipients_help: -Recipients of status and error notifications. Specify one or more email addresses, separate multiple email addresses with a space. +Получатели уведомлений о состоянии и ошибках. Укажите один или несколько адресов электронной почты, разделив несколько адресов электронной почты пробелом. :end :smtp_priority_help: -Set email header with high importance, when there is a problem with unRaid. +Устанавливать пометку о высоком уровне важности в заголовке электронного письма, когда Unraid OS обнаруживает проблему. :end :smtp_subject_prefix_help: -Set a prefix for easy recognition of Unraid messages. +Задайте префикс для легкого распознавания сообщений Unraid OS. :end :smtp_mail_server_help: -Specify the name of the email server. Use the preset service selection to have this filled-in automatically. +Укажите имя почтового сервера. Воспользуйтесь выбором предустановленных сервисов, чтобы это поле заполнилось автоматически. :end :smtp_mail_server_port_help: -Specify the port of the email server. Use the preset service selection to have this filled-in automatically. +Укажите порт почтового сервера. Воспользуйтесь выбором предустановленных сервисов, чтобы это поле заполнилось автоматически. :end :smtp_use_ssl_tls_help: -Specifies whether to use SSL/TLS to talk to the SMTP server. +Укажите, следует ли использовать SSL/TLS для связи с SMTP-сервером. :end :smtp_use_starttls_help: -Specifies whether to use STARTTLS before starting SSL negotiation - See RFC 2487. +Укажите, следует ли использовать STARTTLS перед началом согласования SSL — см. RFC 2487. :end :smtp_define_tls_cert_help: -Select only when you have a certificate which required for communication. +Выбирайте, только если у вас есть сертификат, необходимый для связи. :end :smtp_tls_cert_location_help: -The file name of an RSA certificate to use for TLS - as required. +Имя файла сертификата RSA для использования TLS — по мере необходимости. :end :smtp_authentication_method_help: -Select the correct authentication method for your email server. Use test to verify that access is working properly. +Выберите правильный метод аутентификации для вашего почтового сервера. Используйте **тест**, чтобы убедиться, что доступ работает правильно. :end :smtp_username_password_help: -Enter the username and password to login to your email account. Be aware that the password is stored unencrypted in the email configuration file. +Введите имя пользователя и пароль для входа в свою учетную запись электронной почты. Имейте в виду, что пароль хранится в незашифрованном виде в файле конфигурации электронной почты. :end :plugin_install_help: @@ -1988,13 +2065,17 @@ To delete a User-defined template, select it from the list above and click the r :end :docker_client_name_help: -Give the container a name or leave it as default. +Give the container a name or leave it as default. Two characters minimum. First character must be a-z A-Z 0-9 Remaining characters a-z A-Z 0-9 . - _ :end :docker_client_overview_help: A description for the application container. Supports basic HTML mark-up. :end +:docker_client_additional_requirements_help: +Any additional requirements the container has. Supports basic HTML mark-up. +:end + :docker_client_repository_help: The repository for the application on the Docker Registry. Format of authorname/appname. Optionally you can add a : after appname and request a specific version for the container image. @@ -2008,12 +2089,8 @@ Link to a support thread on Lime-Technology's forum. Link to the project page (eg: www.plex.tv) :end -:docker_client_donation_text_help: -Text to appear on Donation Links Within The Apps Tab -:end - -:docker_client_donation_link_help: -Link to the donation page. If using donation's, both the image and link must be set +:docker_client_readme_help: +Link to a readme file or page :end :docker_client_hub_url_help: @@ -2072,7 +2149,7 @@ Devices you select will be bound to the vfio-pci driver at boot, which makes the     This symbol indicates the device supports FLR (Function Level Reset). -  If a checkbox is greyed out it means the device is in use by Unraid and can not be passed through. +  If a checkbox is greyed out it means the device is in use by Unraid OS and can not be passed through. :end :sysdevs_thread_pairings_help: @@ -2088,3 +2165,170 @@ This displays the output of the `lsscsi` command. The numeric identifiers are u Note that linux groups ATA, SATA and SAS devices with true SCSI devices. :end + +; unraid.net help - added March 11, 2021 +:unraidnet_wanpanel_help: +WAN Port is the external TCP port number setup on your router to NAT/Port Forward traffic from the internet to this +Unraid server SSL port for secure web traffic. +:end + +:unraidnet_inactivespanel_help: +Click Activate to set up a local git repo for your local USB Flash boot device and connect to a dedicated remote on unraid.net tied to this server. +:end + +:unraidnet_changespanel_help: +The Not Up-to-date status indicates there are local files which are changed vs. the remote on unraid.net. + +Click Update to push changes to the remote. + +Click Changes to see what has changed. +:end + +:unraidnet_uptodatepanel_help: +The Up-to-date status indicates your local configuration matches that stored on the unraid.net remote. +:end + +:unraidnet_activepanel_help: +Click Deactivate to pause communication with your remote on unraid.net. + +Click Reinitialize to erase all change history in both local and unraid.net remote. +:end + +:unraidnet_extraorigins_help: +Provide a comma separated list of urls that are allowed to access the unraid-api (https://abc.myreverseproxy.com,https://xyz.rvrsprx.com,…) +:end + +:myservers_remote_t2fa_help: +When Transparent 2FA for Remote Access is enabled, you will access your server by clicking the "Remote Access" link on the My Servers dashboard. The system will transparently request a 2FA token from your server and embed it in the server's login form. Your server will deny any Remote Access login attempt that does not include a valid token. Each token can be used only once, and is only valid for five minutes. +:end + +:myservers_local_t2fa_help: +When Transparent 2FA for Local Access is enabled, you will access your server by clicking the "Local Access" link on the My Servers dashboard. The system will transparently request a 2FA token from your server and embed it in the server's login form. Your server will deny any Local Access login attempt that does not include a valid token. Each token can be used only once, and is only valid for five minutes. + +This is fairly extreme for Local Access, and in most cases is not needed. It requires a solid Internet connection. If you need to access the webgui while the Internet is down, SSH to the server and run 'use_ssl no', this will give you access via http:// +:end + +; WireGuard help text + +:wg_local_name_help: +Используйте это поле, чтобы задать имя для этого соединения и сделать его легко узнаваемым. Это же имя будет отображаться в конфигурации любых пиров. +:end + +:wg_generate_keypair_help: +Используйте кнопку **Создать пару ключей**, чтобы автоматически создать уникальную комбинацию закрытого и открытого ключей.
+Или вставьте существующий закрытый ключ, сгенерированный WireGuard. **НЕ** делитесь этим секретным ключом с другими! +:end + +:wg_local_tunnel_network_pool_help: +WireGuard tunnels need an internal IP address. Assign a network pool using the default IPv4 network /24 +or the default IPv6 network /64 or assign your own network pool from which automatic assignment can be done for both this server and any peers. + +The *tunnel network pool* must be a unique network not already existing on the server or any of the peers. +:end + +:wg_local_tunnel_network_pool_X_help: +WireGuard tunnels need an internal IP address. Assign a network pool using the default IPv4 network /24 or +the default IPv6 network /64 or assign your own network pool from which automatic assignment can be done for both this server and any peers. + +The *tunnel network pool* must be a unique network not already existing on the server or any of the peers. +:end + +:wg_local_tunnel_address_help: +This field is auto filled-in when a local tunnel network pool is created. It is allowed to overwrite the assignment, but this is normally not necessary. Use with care when changing manually. +:end + +:wg_local_tunnel_address_help: +This field is auto filled-in when a local tunnel network pool is created. It is allowed to overwrite the assignment, but this is normally not necessary. Use with care when changing manually. +:end + +:wg_local_endpoint_help: +This field is automatically filled in with the public management domain name *www.<hash>.myunraid.net* or the public address of the server.
+This allows VPN tunnels to be established from external peers to the server.
+Configure the correct port forwarding on your router (default port is but this may be changed) to allow any incoming connections to reach the server. + +Users with a registered domain name can use this field to specify how their server is known on the Internet. E.g. www.myserver.mydomain.
+Again make sure your router is properly set up. + +Note to Cloudflare users: the Cloudflare proxy is designed for http traffic, it is not able to proxy VPN traffic. You must disable the Cloudflare proxy in order to use VPN with your domain. +:end + +:wg_local_endpoint_X_help: +This field is automatically filled in with the public management domain name *www.<hash>.myunraid.net* or the public address of the server.
+This allows VPN tunnels to be established from external peers to the server.
+Configure the correct port forwarding on your router (default port is but this may be changed) to allow any incoming connections to reach the server. + +Users with a registered domain name can use this field to specify how their server is known on the Internet. E.g. www.myserver.mydomain.
+Again make sure your router is properly set up. + +Note to Cloudflare users: the Cloudflare proxy is designed for http traffic, it is not able to proxy VPN traffic. You must disable the Cloudflare proxy in order to use VPN with your domain. +:end + +:wg_local_server_uses_nat_help: +When NAT is enabled, the server uses its own LAN address when forwarding traffic from the tunnel to other devices in the LAN network. +Use this setting when no router modifications are desired, but this approach doesn't work with Docker containers using custom IP addressess. + +When NAT is disabled, the server uses the WireGuard tunnel address when forwarding traffic. +In this case it is required that the default gateway (router) has a static route configured to refer tunnel address back to the server. +:end + +:wg_local_gateway_uses_upnp_help: +Defaults to YES if the local gateway has UPnP enabled and is responding to requests.
+When UPnP is enabled, it is not necessary to configure port forwarding on the router to allow incoming tunnel connections. This is done automatically. +:end + +:wg_local_tunnel_firewall_help: +The firewall function controls remote access over the WireGuard tunnel to specific hosts and/or subnets.
+The default rule is "deny" and blocks addresses specified in this field, while allowing all others.
+Changing the rule to "allow" inverts the selection, meaning only the specified addresses are allowed and all others are blocked.
+Use a comma as separator when more than one IP address is entered. +:end + +:wg_mtu_size_help: +Оставьте это в автоматическом режиме по умолчанию, чтобы выбрать размер MTU. Этот размер MTU является общим для всех одноранговых соединений. +:end + +:wg_peer_configuration_help: +The icon is used to view a peer's configuration. A configuration can be downloaded or read directly for instant set up of the peer.
+The icon is disabled when no peer configuration exists or the user has made changes to the existing settings which are not applied yet. + +The icon is used to show or hide the private, public and preshared keys. Note that these fields are always shown when no keys are set. +:end + +:wg_peer_name_help: +Use this field to set a name for this peer connection and make it easily recognizable. The same name will appear in the configuration of the peer at the opposite side. +:end + +:wg_peer_preshared_key_help: +For added security a preshared key can be used. Use the **Generate Key** button to automatically create a unique preshared key.
+This key is the same at both server and peer side and is added to the peer configuration as well. +:end + +:wg_peer_tunnel_address_help: +This field is auto filled-in when a local tunnel network pool is created. It is allowed to overwrite the assignment, but this is normally not necessary. Use with care when changing manually.
+Each peer must have a unique tunnel IP address. +:end + +:wg_peer_endpoint_help: +When this field is left empty, the server operates in *passive mode* to establish the tunnel. It must be the peer which starts the tunnel. + +When an IP address is entered to connect to the peer, the server operates in *active mode* and establishes the tunnel to the peer as soon as there is data to send. + +*Note: this field is mandatory for "server-to-server" and "LAN-to-LAN" connections* +:end + +:wg_peer_allowed_ips_help: +This field is automatically filled in with the tunnel address of the peer. This allows the server to reach the peer over the tunnel.
+When the peer is another server or router with additional networks, then their subnets can be added here to make these networks reachable over the tunnel. +:end + +:wg_peer_dns_server_help: +Use this entry to overwrite the current DNS server assignment of the Peer +:end + +:wg_persistent_keepalive_help: +By default a WireGuard tunnel stays silent when no traffic is present, which may cause the connection to drop. +Normally this isn't a problem since a WireGuard tunnel is automatically re-established when it is needed.
+A keepalive timer will hold the connection open, for most situations a timer value of 20 seconds is suitable. + +Note that for mobile devices this will use more data and drain your battery faster. +:end diff --git a/javascript.txt b/javascript.txt index 94d989e..be75714 100644 --- a/javascript.txt +++ b/javascript.txt @@ -1,57 +1,68 @@ -also remove image= -Apply= -Are you sure=Are you sure? -Cancel= -checking= -Completely REMOVE= -Console= -day= -days= -disk image and definition= -Disks= -Done= -Edit= -Execution error= -Force Stop= -Hibernate= -Log for=Log for: -log= -Logs= -More Info= -No= -OK= -Ok= -Pause= -Proceed= -Project Page= -Remove container= -Remove definition= -Remove image= -Remove VM= -Remove= -Restart= -Resume= -Start= -Stop= -Support= -Update container= -Update= -Updating all Containers= -Updating the container= -VNC Remote= -WebUI= -Yes, delete it=Yes, delete it! -Yes, update it=Yes, update it! -Yes= +also remove image=также удалить образ +Apply=Применить +Are you sure=Вы уверены? +Cancel=Отмена +checking=проверка +Completely REMOVE=Полностью УДАЛИТЬ +Console=Консоль +day=день +days=дней +disk image and definition=образ диска и определение +Disks=Диски +Donate=Пожертвовать +Done=Готово +Edit=Изменить +Execution error=Ошибка выполнения +Force Stop=Принудительная остановка +Hibernate=Спящий режим +Log for=Журнал для: +log=Журнал +Logs=Журналы +More Info=Больше информации +No=Нет +OK=ОК +Ok=Ок +Pause=Приостановить +Proceed=Продолжить +Project Page=Страница проекта +Read Me First=Сначала прочитай меня +Remove container=Удалить контейнер +Remove definition=Удалить определение +Remove image=Удалить образ +Remove VM=Удалить ВМ +Remove=Удалить +Restart=Перезапустить +Resume=Возобновить +Start=Запустить +Stop=Остановить +Support=Служба поддержки +Update container=Обновить контейнер +Update=Обновить +Updating all Containers=Обновление всех контейнеров +Updating the container=Обновление контейнера +VNC Remote=Удалённый доступ VNC +WebUI=Веб-интерфейс +Yes, delete it=Да, удалить! +Yes, update it=Да, обновить! +Yes=Да ; footer messages -Array Starting= -Array Stopping= -Mounting disks= -Spinning up all drives= -Starting services= -Stopping services= -Unmounting disks= -Autostart disabled= -Missing encryption key= -Opening encrypted volumes= +Array Copying=Копирование массива +Array Clearing=Очистка массива +Array Starting=Запуск массива +Array Stopping=Остановка массива +Mounting disks=Монтирование дисков +Spinning up all drives=Раскрутка всех дисков +Starting services=Запуск сервисов +Stopping services=Остановка сервисов +Unmounting disks=Размонтирование дисков +Autostart disabled=Автозапуск отключён +Missing encryption key=Отсутствует ключ шифрования +Opening encrypted volumes=Открытие зашифрованных томов + +; docker variables +Container Path=Путь к контейнеру +Container Port=Порт контейнера +Container Variable=Переменная контейнера +Container Label=Этикетка контейнера +Container Device=Устройство контейнера diff --git a/lang-ru_RU.xml b/lang-ru_RU.xml new file mode 100644 index 0000000..78ec7f0 --- /dev/null +++ b/lang-ru_RU.xml @@ -0,0 +1,18 @@ + + +https://github.com/LinXP/lang-ru_RU/archive/master.zip +Russian +Русский +ru_RU +LinXP +Пакет русской локализации +https://raw.githubusercontent.com/LinXP/lang-ru_RU/blob/master/lang-ru_RU.xml +2021.12.23 +https://icons.iconarchive.com/icons/wikipedia/flags/256/RU-Russia-Flag-icon.png +https:// + +Пакет русской локализации + +This is a Russian translation for Unraid and supported plugins + + diff --git a/main.txt b/main.txt index 08d566b..f863017 100644 --- a/main.txt +++ b/main.txt @@ -1,265 +1,296 @@ -A format is NEVER part of a data recovery or disk rebuild process and if done in such circumstances will normally lead to loss of all data on the disks being formatted=A format is **NEVER** part of a data recovery or disk rebuild process and if done in such circumstances will normally lead to loss of all data on the disks being formatted -Aborted= -Add= -Add Pool= -All existing data on this device will be OVERWRITTEN when array is Started= -Array Devices= -Array of %s devices= -Array Operation= -Attribute Name= -Attributes= -Balance Status= -Balance= -Blacklisted= -Boot Device= -Boot system in UEFI mode= +A format is NEVER part of a data recovery or disk rebuild process and if done in such circumstances will normally lead to loss of all data on the disks being formatted=Форматирование **НИКОГДА** не является частью процесса восстановления данных или перестроения диска, и если оно выполняется в таких обстоятельствах, это обычно приводит к потере всех данных на форматируемых дисках. +Aborted=Прервано +Action=Действие +Add=Добавить +Add Pool=Добавить пул +All existing data on this device will be OVERWRITTEN when array is Started=Все существующие данные на этом устройстве будут ПЕРЕЗАПИСАННЫ при запуске массива. +Array Devices=Массив устройств +Array of %s devices=Массив из %s устройств +Array Operation=Действия с массивом +Attribute Name=Имя атрибута +Attributes=Атрибуты +auto=авто +Balance Status=Статус балансировки +Balance=Балансировка +Blacklisted=В чёрном списке +Boot Device=Загрузочное устройство +Boot system in UEFI mode=Загрузка системы в режиме UEFI btrfs balance status= btrfs check status= btrfs filesystem df= BTRFS operation is running= btrfs scrub status= -Can not read attributes= -Can not read capabilities= -Can not read identification= -Canceled= -Cannot contact key-server Please check your= -Capabilities= -Check Filesystem Status= -Clear Stats= -Clearing in progress= -Click to spin down device= -Click to spin up device= -Comments= +Can not read attributes=Не удается прочитать атрибуты +Can not read capabilities=Не удается прочитать возможности +Can not read identification=Не удается прочитать идентификацию +Canceled=Отменено +Cannot contact key-server Please check your=Невозможно связаться с сервером ключей. Пожалуйста, проверьте его +Capabilities=Возможности +Check Filesystem Status=Проверка статуса файловой системы +Clear Stats=Сброс статистики +Clearing in progress=Выполняется очистка +Click on FLASH above this message=Click on **FLASH** above this message +Click to spin down device=Нажмите, чтобы выключить устройство +Click to spin up device=Нажмите, чтобы запустить устройство +Comments=Комментарии complete= -Completed without error= -Configuration valid= +completed=Завершено +Completed without error=Завершено без ошибок +Configuration valid=Конфигурация действительна Convert to raid0 mode= Convert to raid1 mode= Convert to raid10 mode= +Convert to raid1c3 mode= +Convert to raid1c4 mode= Convert to raid5 mode see help=Convert to raid5 mode *see help Convert to raid6 mode see help=Convert to raid6 mode *see help Convert to single mode= -Copying= -corrected= -Create an empty file system on the disks shown as Unmountable discarding all data currently on the disks and update parity to reflect this= -Creating Flash backup= -creating Flash backup zip file this may take several minutes=creating Flash backup zip file (this may take several minutes) -Creation error= -Critical disk temperature threshold= -Critical disk utilization threshold= -Current operation %s on %s=Current operation %s on **%s** -Current position= -Custom attributes use comma to separate numbers=Custom attributes (use comma to separate numbers) -Date of purchase= -Date= -Delete Pool= -detected= -Device encrypted and unlocked= -Device encrypted= -Device is part of a pool= -Device locked unknown error= -Device locked wrong encryption key=Device locked: wrong encryption key -Device to be encrypted= -Disk in parity slot is not biggest= -Disk Log Information= -Do not use reserved names= +Copying=Копирование +corrected=исправлено +Create an empty file system on the disks shown as Unmountable discarding all data currently on the disks and update parity to reflect this=Create an empty file system on the disks shown as **Unmountable** discarding all data currently on the disks and update parity to reflect this +Creating Flash backup=Создание резервной копии Flash +creating Flash backup zip file this may take several minutes=создание ZIP-файла резервной копии Flash (это может занять несколько минут) +Creation error=Ошибка создания +Critical disk temperature threshold=Критический порог температуры диска +Critical disk utilization threshold=Критический порог использования диска +Current operation %s on %s=Текущая операция %s на **%s** +Current position=Текущая позиция +Custom attributes use comma to separate numbers=Настраиваемые атрибуты (используйте запятую для разделения чисел) +Data-Rebuild in progress= +Date of purchase=Дата покупки +Date=Дата +Delete Pool=Удалить пул +detected=обнаружен +Device encrypted and unlocked=Устройство зашифровано и разблокировано +Device encrypted=Устройство зашифровано +Device is part of a pool=Устройство является частью пула +Device locked unknown error=Устройство заблокировано: неизвестная ошибка +Device locked wrong encryption key=Устройство заблокировано: неверный ключ шифрования +Device to be encrypted=Устройство, которое нужно зашифровать +Disable Spin down delay to run a SMART extended self-test=Disable **Spin down delay** to run a SMART extended self-test +Disk in parity slot is not biggest=Диск в слоте четности не самый большой +Disk Log Information=Информация журнала диска +Disk-Clear in progress=Выполняется очистка диска +Do not use reserved names=Не используйте зарезервированные имена Do not use user share names= -Download SMART report= +Download SMART report=Скачать отчет SMART Dual parity valid requires ALL disks in their original slots=*Dual parity* valid requires **ALL** disks in their original slots -Elapsed time= +Elapsed time=Затраченное время Enable user share assignment= -encrypted= +enter disk index and device name as applicable to your controller=введите индекс диска и имя устройства в зависимости от вашего контроллера +Erase Device Content=Стереть содержимое устройства +encrypted=зашифрованный Encryption input= -Encryption status= -Enter new key= -Errors occurred - Check SMART report= -Estimated finish= -Estimated speed= -Failed= -Feature= -File system status= -File system type= -Finding %s error=Finding: **%s** error -Finding %s errors=Finding: **%s** errors -Flag= +Encryption status=Статус шифрования +Enter new key=Введите новый ключ +Errors occurred - Check SMART report=Произошли ошибки - проверьте отчет SMART +Estimated finish=Расчетное время +Estimated speed=Расчетная скорость +Existing content is permanently lost=Существующий контент будет безвозвратно утерян +Failed=Не удалось +Feature=Особенность +File system status=Статус файловой системы +File system type=Тип файловой системы +Finding %s error=Обнаружено: **%s** ошибка +Finding %s errors=Обнаружено: **%s** ошибок +Flag=Флаг Flash backup= +Flash device is set as public share= Flash Device Settings= -Format Unmountable disks= -Formatting= -formatting= -Free= -FS= -Global Configuration= -Hide= -Identification= -Identity= -if checked, Start array but do not mount disks= -If this is a new array, move the largest disk into the parity slot= +Format Unmountable disks=Форматирование немонтируемых дисков +Formatting=Форматирование +formatting=форматирование +Free=Свободно +FS=ФС +Global Configuration=Общая конфигурация +Hide=Скрыть +Identification=Идентификация +Identity=Информация +if checked, Start array but do not mount disks=если отмечено, запускает массив, но не монтирует диски +If this is a new array, move the largest disk into the parity slot=If this is a new array, move the largest disk into the *parity* slot If you are adding a new disk or replacing a disabled disk, try Parity-Swap= -If you want to preserve the data on the new disks, reset the array configuration and rebuild parity instead= -Information= -Install a replacement disk as soon as possible= -Insufficient free disk space available= -Interrupted= -Invalid configuration= -Invalid expansion= -Invalid pool name= -is only available when array is Started in Maintenance mode=is only available when array is Started in **Maintenance mode** -is only available when array is Started= -Keyfile= -Last check completed on %s=Last check completed on **%s** -Last check incomplete on %s=Last check incomplete on **%s** -Last checked on %s=Last checked on **%s** -Last SMART test result= -Maintenance mode= -Maintenance Mode= -Maintenance= -Manufacturing date= -Menu View= -Minimum free space= -Missing Cache disk= -Missing disk= -Missing key= -Missing= -Mounted= -Mover is running= -network settings= -New data disks detected= +Information=Информация +Insufficient free disk space available=Недостаточно свободного места на диске +Interrupted=Прервано +Invalid configuration=Неверная конфигурация +invalid device=недопустимое устройство +invalid devices=недопустимые устройства +Invalid expansion=Недопустимое расширение +Invalid pool name=Недопустимое имя пула +Invalid, missing or expired=Недействительный, отсутствующий или просроченный +is only available when array is Started in Maintenance mode=доступна только в том случае, если массив запущен в режиме **Обслуживания** +is only available when array is Started=доступно только при запуске массива +Keyfile=Файл ключа +Last check completed on %s=Последняя проверка завершена **%s** +Last check incomplete on %s=Последняя проверка не завершена **%s** +Last checked on %s=Последний раз проверено **%s** +Last SMART test result=Результат последнего SMART теста +Maintenance mode=Режим обслуживания +Maintenance Mode=Режим обслуживания +Maintenance=Обслуживание +Manufacturing date=Дата производства +Menu View=Просмотр меню +Minimum free space=Минимум свободного места +Missing Cache disk=Отсутствует кеш-диск +Missing disk=Отсутствует диск +Missing key=Отсутствует ключ +Missing=Отсутствует +Mounted=Установлен +Mover is running=Mover работает +network settings=настройки сети +next device=следующее устройство +New data disks detected=Обнаружен новый диск(и) с данными No array data disks have been assigned= -No data disks= +No data disks=Нет дисков с данными No parity check history present= -No self-tests logged on this disk= -Not installed= -Note do not use pool names which are also used as user share names=Note: do not use pool names which are also used as user share names -OK= -Once clear completes, the array may be Started, expanding the array to include the new disks= +No self-tests logged on this disk=Для этого диска нет записей самодиагностики +Not installed=Не установлено +OK=ОК Once copy completes, the array may be Started, to initiate Data-Rebuild of the disabled disk= -operation= -Options see Help=Options (see Help) +operation=операция +Options see Help=Параметры (см. Справку) Otherwise use the keyfile method for UTF8 input=Otherwise use the **keyfile** method for UTF8 input Parity disks content will be overwritten=*Parity* disk(s) content will be overwritten Parity is already valid= Parity operation is running= Parity valid requires ALL disks to have their original content=*Parity valid* requires **ALL** disks to have their original content Parity-Check in progress= +Parity Operation History= ParityRead-Check History=Parity/Read-Check History Parity-SyncData-Rebuild in progress=Parity-Sync/Data-Rebuild in progress -Partition format= -Partition size= +Parity-Sync in progress= +Partition format=Формат раздела +Partition size=Размер раздела Passed= -Passphrase= +Passphrase=Кодовая фраза Perform full balance= -Permit UEFI boot mode= -Please check your system settings to support UEFI boot mode= -Pool Devices= -Pool name already exists= -Pool of %s devices= +Permit UEFI boot mode=Разрешить режим загрузки UEFI +Please change share SMB security= +Please check your system settings to support UEFI boot mode=Пожалуйста, проверьте настройки вашей системы для поддержки режима загрузки UEFI +Pool Devices=Устройства пула +Pool name already exists=Имя пула уже существует. +Pool of %s devices=Пул из %s устройств Preclear in progress= -Printable Characters Only= +previous device=предыдущее устройство +Printable Characters Only=Только печатные символы Proceed to start= Raw Value= Raw View= -Read-Check in progress= -Reboot in safe mode= -registration key= -Registration Key Manager= +Read-Check in progress=Выполняется проверка чтения +Reading=Чтение +Reboot in safe mode=Перезагрузка в безопасный режим +registration key=регистрационный ключ +Registration Key Manager=Менеджер регистрационных ключей reiserfsck status= -Rename Pool= -Rename= -Repair corrupted blocks= -Replacement disk installed= -Replacement disk is too small= -Retype passphrase= -Schedule= +Rename Pool=Переименовать пул +Repair corrupted blocks=Восстановить повреждённые блоки +Replacement disk installed=Установлен сменный диск +Replacement disk is too small=Сменный диск слишком мал +Retype passphrase=Введите кодовую фразу ещё раз +Schedule=Расписание Scrub Status= Scrub= -See Cache Settings= -self-test in progress= -Self-Test= -Server boot mode= +See %s Settings=См. настройки %s +self-test in progress=выполняется самодиагностика +Self-Test=Самодиагностика +Server boot mode=Режим загрузки сервера Set default boot menu= -show passphrase= -Show= -Slots= +show passphrase=показать кодовую фразу +Show=Показать +Slots=Слоты SMART attribute notifications= -SMART error log= -SMART extended self-test= +SMART controller type= +SMART error log=Журнал ошибок SMART +SMART extended self-test=Расширенная самодиагностика SMART SMART health-check failed= +SMART notification tolerance level= SMART notification value= -SMART self-test history= -SMART Settings= -SMART short self-test= -SMART status= -Speed= +SMART self-test history=История самодиагностики SMART +SMART self-test in progress=Выполняется самодиагностика SMART +SMART Settings=Настройки SMART +SMART short self-test=Короткая самодиагностика SMART +SMART status=Статус SMART +Speed=Скорость Spin down delay= Spin Down= Spin Up= -Spinup groups= -Started, array protected= -Started, array unprotected= -Started, formatting= +Spinup groups=Spinup group(s) +Started, array protected=Запущен, массив защищён +Started, array unprotected=Запущен, массив не защищён +Started, clearing=Запущено, очистка +Started, formatting=Запущено, форматирование +Starting, copying= Starting= Stopping= -Sync errors= -Sync= -Syslinux Configuration= -Syslinux configuration= -Temp= +Sync errors=Ошибки синхронизации +Sync errors corrected=Ошибки синхронизации исправлены +Sync errors detected=Обнаружены ошибки синхронизации +Sync=Синхронизировать +Syslinux Configuration=Конфигурация Syslinux +Syslinux configuration=Конфигурация Syslinux +Temp=Температура The array will be immediately available, but unprotected since parity has not been assigned=The array will be immediately available, but **unprotected** since *parity* has not been assigned The array will be immediately available, but unprotected until Parity-Sync completes=The array will be immediately available, but **unprotected** until Parity-Sync completes -The replacement disk must be as big or bigger than the original= -This is typically done when a new disk is added to the array to get it ready for files to be written to it= -This unRAID Server OS release has been withdrawn and may no longer be used. Please %s update your server= -This will reboot the system= -This will shutdown the system= -This will stop the array= -This will stop the running operation= +The replacement disk must be as big or bigger than the original=Новый диск должен быть такого же размера или больше, чем оригинальный +This is typically done when a new disk is added to the array to get it ready for files to be written to it=Обычно это делается, когда в массив добавляется новый диск, чтобы подготовить его к записи на него файлов. +This Unraid OS release has been withdrawn and may no longer be used Please=Эта версия Unraid OS была отозвана и больше не может использоваться. Пожалуйста +This will ERASE ALL device content=Это УДАЛИТ ВСЁ содержимое устройства +This will ERASE content of ALL devices in the pool=Это приведет к УДАЛЕНИЮ содержимого ВСЕХ устройств в пуле. +This will reboot the system=Это перезагрузит систему +This will shutdown the system=Это отключит систему +This will stop the array=Это остановит массив +This will stop the running operation=Это остановит текущую операцию. Threshold= -Title= -Toggle readswrites display=Toggle reads/writes display -Too many attached devices Please consider upgrading your= -Too many wrong andor missing disks=Too many wrong and/or missing disks -Total size= -Unassign ALL devices to delete this pool=Unassign **ALL** devices to delete this pool -Unassigned Devices= -unavailable no parity-check entries logged=unavailable (no parity-check entries logged) +Title=Заголовок +To confirm your action type %s=Для подтверждения действия введите: %s +Toggle readswrites display=Переключить отображение чтения/записи +Too many attached devices Please consider upgrading your=Слишком много подключенных устройств. Пожалуйста, подумайте об обновлении его +Too many wrong andor missing disks=Слишком много неправильных и/или отсутствующих дисков +Total size=Общий размер +Unassign ALL devices to delete this pool=Отменить назначение **ВСЕХ** устройств, чтобы удалить этот пул +Unassigned Devices=Неназначенные устройства +unavailable no parity-check entries logged=недоступен (записи об проверке чётности отсутствуют) Unavailable - disk must be spun up= -Unavailable= -Unclean shutdown detected= -Unmountable disk present= -Unmountable disks present= -Unmountable Encrypted volume present=Unmountable: Encrypted volume present -Unmountable Missing encryption key=Unmountable: Missing encryption key -Unmountable No file system=Unmountable: No file system -Unmountable No pool uuid=Unmountable: No pool uuid +Unavailable=Недоступен +Unclean shutdown detected=Обнаружено нечистое завершение работы +Unmountable disk present=Присутствует не монтируемый диск +Unmountable disks present=Присутствует не монтируемые диски +Unmountable Encrypted volume present=Не монтируется: есть зашифрованный том +Unmountable Missing encryption key=Не монтируется: отсутствует ключ шифрования +Unmountable No file system=Не монтируется: нет файловой системы +Unmountable No pool uuid=Не монтируется: нет uuid пула Unmountable not btrfs pool=Unmountable: not btrfs pool -Unmountable Volume not encrypted=Unmountable: Volume not encrypted +Unmountable Unsupported or no file system=Не монтируется: Не поддерживается или отсутствует файловая система +Unmountable Volume not encrypted=Не монтируется: том не зашифрован Unmounted= Upgrading diskswapping parity=Upgrading disk/swapping parity -Use ASCII characters from space to tilde=Use **ASCII** characters from space to tilde -Use Default= -Use default= -Use only lowercase with no special characters or leadingtrailing digits=Use only lowercase with no special characters or leading/trailing digits -use printable characters only= -Used= -Value= -WARNING canceling may leave the array unprotected=WARNING: canceling may leave the array unprotected -Warning disk temperature threshold= -Warning disk utilization threshold= -WARNING= -Warranty period= -will activate a clean system power down= -will activate a clean system reset= -will bring the array on-line and start Clearing new data disks=will bring the array on-line and start **Clearing** new data disks +Use ASCII characters from space to tilde=Используйте символы **ASCII** от пробела ' ' до тильды '~' +Use Default=По умолчанию +Use default=По умолчанию +Use only lowercase with no special characters or leadingtrailing digits=Используйте только нижний регистр без специальных символов или начальных/конечных цифр. +use printable characters only=используйте только печатные символы +Used=Используется +Value=Значение +WARNING canceling may leave the array unprotected=ВНИМАНИЕ: отмена может оставить массив незащищенным +Warning disk temperature threshold=Предупреждающий порог температуры диска +Warning disk utilization threshold=Предупреждающий порог использования диска +WARNING=ПРЕДУПРЕЖДЕНИЕ +Warranty period=Гарантийный срок +will activate a clean system power down=активирует *чистое* отключение питания системы +will activate a clean system reset=активирует *чистый* сброс системы +will bring the array on-line and start Clearing new data disks=will bring the array on-line and start **Clearing** new data disk(s) +will bring the array on-line and start Data-Rebuild=will bring the array on-line and start **Data-Rebuild** +will bring the array on-line and start Disk-Clear of new data disks=will bring the array on-line and start **Disk-Clear** of new data disk(s) will bring the array on-line and start Parity-Check=will bring the array on-line and start **Parity-Check** +will bring the array on-line and start Parity-Sync=will bring the array on-line and start **Parity-Sync** will bring the array on-line and start Parity-Sync andor Data-Rebuild=will bring the array on-line and start **Parity-Sync** and/or **Data-Rebuild** -will bring the array on-line= -will copy the parity information to the new parity disk= -will create a file system in all Unmountable disks= -will delete the encryption keyfile= -will disable the missing disk and then bring the array on-line Install a replacement disk as soon as possible=will disable the missing disk and then bring the array on-line. Install a replacement disk as soon as possible= -will expand the file system of the data disk if possible then bring the array on-line and start Data-Rebuild=will expand the file system of the data disk; if possible then bring the array on-line and start Data-Rebuild -will immediately clear all disk statistics= +will bring the array on-line=выведет массив в онлайн +will copy the parity information to the new parity disk=скопирует информацию о чётности на новый *диск чётности* +will create a file system in all Unmountable disks=создаст файловую систему на всех **Не монтируемых** дисках +will delete the encryption keyfile=удалит файл ключа шифрования +will disable the missing disk and then bring the array on-line Install a replacement disk as soon as possible=will disable the missing disk and then bring the array on-line. Install a replacement disk as soon as possible +will expand the file system of the data disk if possible then bring the array on-line and start Data-Rebuild=will expand the file system of the data disk (if possible); then bring the array on-line and start Data-Rebuild +will immediately clear all disk statistics=немедленно очистит всю статистику диска will immediately invoke the Mover= will immediately spin down all disks= will immediately spin up all disks= @@ -267,51 +298,54 @@ will pause the Clearing= will pause the Parity-Check= will pause the Parity-SyncData-Rebuild=will pause the Parity-Sync/Data-Rebuild will pause the Read-Check= +will pause Data-Rebuild= +will pause Disk-Clear= +will pause Parity-Check= +will pause Parity-Sync= +will pause Read-Check= will record all disk information and bring the array on-line= will record all disk information, bring the array on-line, and start Parity-Sync= -will record the new disks information and bring the expanded array on-line= will remove the missing cache disk and then bring the array on-line= will resume the paused Clearing= will resume the paused Parity-Check= will resume the paused Parity-SyncData-Rebuild=will resume the paused Parity-Sync/Data-Rebuild will resume the paused Read-Check= -will start Clearing new data disks=will start **Clearing** new data disks -will start Parity-Check=will start **Parity-Check** +will resume Data-Rebuild +will resume Disk-Clear= +will resume Parity-Check= +will resume Parity-Sync +will resume Read-Check= +will start Clearing new data disks=will start **Clearing** new data disk(s) will start Parity-Sync andor Data-Rebuild=will start **Parity-Sync** and/or **Data-Rebuild** +will start Disk-Clear of new data disks=will start **Disk-Clear** of new data disk(s) +will start Parity-Check=will start **Parity-Check** +will start Data-Rebuild=will start **Data-Rebuild** +will start Parity-Sync=will start **Parity-Sync** will start Read-Check of all array disks=will start **Read-Check** of all array disks -will start Read-Check of all data disks=will start **Read-Check** of all data disks -will stop Clearing= will stop Parity-SyncData-Rebuild=will stop Parity-Sync/Data-Rebuild will stop the Parity-Check= will stop the Read-Check= -will take the array off-line= -Worst= +will stop Clearing= +will stop Disk-Clear= +will stop Data-Rebuild= +will stop Parity-Check= +will stop Parity-Sync= +will stop Read-Check= +will take the array off-line=переведёт массив в автономный режим +Worst=Наихудший Write corrections to parity= -Writes= -Wrong key= -xfs_repair status= -You may not add new disks and also remove existing disks= -your server= +Writes=Записей +Wrong key=Неправильный ключ +xfs_repair status=статус xfs_repair +You may not add new disks and also remove existing disks=Вы не можете добавлять новые диски, а также удалять существующие диски. +your server=ваш сервер -; New entries - 2021-03-14 -completed= -Erase= -Erase Device Content= -Existing content is permanently lost= -Invalid, missing or expired= -SMART controller type= -SMART notification tolerance level= -SMART self-test in progress= -This Unraid OS release has been withdrawn and may no longer be used Please=This Unraid OS release has been withdrawn and may no longer be used. Please -This will ERASE ALL device content= -This will ERASE content of ALL devices in the pool= -To confirm your action type %s=To confirm your action type: %s - -; New entries - 2021-03-14 -auto= -Click on FLASH above this message=Click on **FLASH** above this message -Convert to raid1c3 mode= -Convert to raid1c4 mode= -Flash device is set as public share= -Please change share SMB security= -See %s Settings= +; Sleep plugin translations +Check this=Проверьте эту +for more information=для получения дополнительной информации +Make sure your server supports S3 sleep=Убедитесь, что ваш сервер поддерживает спящий режим S3 +Sleep will immediately put the server in sleep mode=**Спящий режим** немедленно переведет сервер в спящий режим. +Sleeping= +System in sleep mode=Система в спящем режиме +This will put the system in sleep mode=Это переведёт систему в спящий режим +wiki entry=вики-запись diff --git a/plugins.txt b/plugins.txt index c1ca0e9..75fa02a 100644 --- a/plugins.txt +++ b/plugins.txt @@ -1,32 +1,38 @@ -%s An update is available=%s: An update is available. -anonymous= -Author= -Check For Updates= -Click here to install version %s= -DOWNGRADE TO VERSION= -Enter URL of remote plugin file or local plugin file= -ERROR= -Install Plugin= -Install= -install= -Installed Plugins= -Installing Update= -need check= -Next= -No release notes available= -Plugin File= -Plugin Update Check= -Plugin= -Release Notes= -remove= -Select local plugin file= -Stable= -STALE= -Support Thread= -Uninstall= -Update All Plugins= -Upgrade= -View Release Notes= - -; New entries - 2021-03-14 -No plugins installed= +%s An update is available=%s: доступно обновление. +anonymous=анонимный +Author=Автор +Check For Updates=Проверить наличие обновлений +Checking connectivity=Проверка подключения +checking=проверка +Click here to install version %s=Нажмите здесь, чтобы установить версию %s +Delete Plugin=Удалить плагин +DOWNGRADE TO VERSION=ПЕРЕХОД НА ВЕРСИЮ +Enter URL of remote plugin file or local plugin file=Введите URL-адрес удаленного файла плагина или локальный файл плагина +ERROR=ОШИБКА +Install Plugin=Установить плагин +Install=Установить +install=установить +Installed Plugins=Установленные плагины +Installing Update=Устанавливается обновление +need check=нужна проверка +Next=Следующая +No plugins installed=Плагины не установлены +No release notes available=Нет доступных примечаний к выпуску +No response, aborting=Нет ответа, отмена +Plugin File=Файл плагина +Plugin File Install Errors=Ошибки при установке файла плагина +Plugin History=История плагина +Plugin Update Check=Проверка обновлений плагина +Plugin=Плагин +Release Notes=Примечания к выпуску +Remove Plugin=Удалить плагин +remove=Удалить +Select local plugin file=Выберите локальный файл плагина +Stable=Стабильная +STALE=ПРОСТОЙ +Support Thread=Тема на форуме +Uninstall=Удалить +Update All Plugins=Обновить все плагины +Update Plugin=Обновить плагин +Upgrade=Обновить +View Release Notes=Просмотреть примечания к выпуску diff --git a/scripts.txt b/scripts.txt index 04d26eb..64de1d5 100644 --- a/scripts.txt +++ b/scripts.txt @@ -1,5 +1,5 @@ -A new version of %s is available= +A new version of %s is available=Доступна новая версия %s Docker= -Language= -Notice %s - Version update %s= -Plugin= +Language=Язык +Notice %s - Version update %s=Уведомление [%s] - Обновление версии %s +Plugin=Плагин diff --git a/settings.txt b/settings.txt index d233fe0..aac7241 100644 --- a/settings.txt +++ b/settings.txt @@ -1,105 +1,141 @@ -12 hours= -24 hours= -8023ad= -Active Directory Settings= -Active Directory= +%s ago=%s назад +%s is out of range minimum 1 maximum 65535=%s вне допустимого диапазона (минимум 1 максимум 65535) +12 hours=12 часов +24 hours=24 часа +8023ad=802.3ad +Accumulation duration= +Accumulation frequency= +Activate=Активировать +Activated=Активирован +Activating=Активация +Active Directory Settings=Настройки Active Directory +Active Directory=Active Directory active-backup= -AD account login= -AD account password= -AD domain name= -AD initial group= -AD initial owner= -AD join status= -AD short domain name= -Add Route= -Add VLAN= -Agent function= -Agents= -Alerts= -and, the first and last characters must be alphanumeric= -and= -APC UPS Daemon user manual= +AD account login=Вход в учетную запись AD +AD account password=Пароль учетной записи AD +AD domain name=Доменное имя AD +AD initial group=Первоначальная группа AD +AD initial owner=Первоначальный владелец AD +AD join status=Статус присоединения к AD +AD short domain name=Короткое доменное имя AD +Add Peer=Добавить пир +Add Route=Добавить маршрут +Add Tunnel=Добавить туннель +Add VLAN=Добавить VLAN +Advanced=Расширенный +Agent function=Функция агента +Agents=Агенты +Alerts=Оповещения +Allow Remote Access=Разрешить удаленный доступ +Allow=Разрешить +and, the first and last characters must be alphanumeric=и первый и последний символы должны быть буквенно-цифровыми. +and=и +APC UPS Daemon user manual=Руководство пользователя APC UPS Daemon APCsmart= -Apply to activate Docker after Array is Started= -Apply to activate VMs after Array is Started= -Array must be Stopped to change=Array must be **Stopped** to change -Array status notification= -Array status= -Assignment error= -Attention= -Attribute= -Authentication method= -Available notifications= +Apply to activate Docker after Array is Started=Применить для активации Docker после запуска массива +Apply to activate VMs after Array is Started=Применить для активации виртуальных машин после запуска массива +Applying=Применение +Array must be Stopped to change=Чтобы изменить массив, необходимо его **Остановить** +Array status notification=Уведомление о статусе массива +Array status=Статус массива +Assignment error=Ошибка назначения +Attention=Внимание +Attribute=Атрибут +Authentication method=Метод аутентификации +automatic=автоматический +Autostart=Автозапуск +Available notifications=Доступные уведомления +Balance schedule= balance-alb= balance-rr= balance-tlb= balance-xor= -Bar color - Text=Bar (color) - Text -Bar color= -Bar gray - Text=Bar (gray) - Text -Bar gray=Bar (gray) -Battery Charge= -Battery level to initiate shutdown= +Bar color - Text=Полоса (цвет) - Текст +Bar color=Полоса (цвет) +Bar gray - Text=Полоса (серая) - текст +Bar gray=Полоса (серый) +Basic=Базовый +Battery Charge=Заряд батареи +Battery level to initiate shutdown=Уровень заряда батареи для инициирования выключения bfq= -Bonding members of= -Bonding mode= -Both= -bottom-left= -bottom-right= +Block group usage= +Bonding members of=Связующие члены +Bonding mode=Режим связывания +Both=Оба +bottom-left=внизу слева +bottom-right=внизу справа Bridging members of= broadcast= -Browser= +Browser=Браузер btrfs filesystem show= btrfs scrub status= btrfs vDisk= -Cache disk not enabled= -Cache Settings= +Cache disk not enabled=Кеш-диск не включён +Cache Settings=Настройки кеша Cannot provision cert that would overwrite your existing custom cert at= Cannot renew cert until within 30 days of expiry= -center= -Certificate expiration= -Certificate issuer= -Check cable= -Check four times a day= -Check once a day= -Check once a month= -Check once a week= -Check twice a day= -Click here to see the Unraid Wiki for more information= -Click to invoke the Mover= -Click to select PNG file= -Click to Select= -configuring interface= -Confirm array stop command= -Confirm reboot powerdown commands=Confirm reboot & powerdown commands -Confirm sleep command= -Confirmations= -Container= -Content= -Correct file system errors= +Cannot renew a custom cert at= +CA-signed certificate file= +Celsius=Градус Цельсия (°C) +center=по центру +Certificate expiration=Срок действия сертификата +Certificate issuer=Эмитент сертификата +Certificate subject=Тема сертификата +Certificate will not renew unless you are signed in to Unraidnet=Certificate will not renew unless you are signed in to Unraid.net +Changes=Изменения +Check cable=Проверьте подключение кабеля +Check four times a day=Проверять четыре раза в день +Check once a day=Проверять раз в день +Check once a month=Проверять раз в месяц +Check once a week=Проверять раз в неделю +Check twice a day=Проверять дважды в день +Checking=Проверка +CIDR optional= +Click here to see the Unraid Wiki for more information=Нажмите здесь, чтобы перейти на Unraid Wiki для получения дополнительной информации. +Click to invoke the Mover=Нажмите, чтобы вызвать Mover +Click to select PNG file=Нажмите, чтобы выбрать файл PNG +Click to Select=Нажмите, чтобы выбрать +Comma separated list of IPv4 and IPv6 IP addresses=Список IP-адресов IPv4 и IPv6, разделенных запятыми +configure your router with a static route of= +configure your router with port forwarding of port= +configuring interface=настройка интерфейса +Confirm array stop command=Подтверждение команды остановки массива +Confirm reboot powerdown commands=Подтверждение команд перезагрузки и выключения +Confirm sleep command=Подтверждение команды сна +Confirmations=Подтверждения +connect to any device on the VPN tunnel= +connect to this server using IP address=подключиться к этому серверу, используя IP-адрес +Container=Контейнер +Content=Содержание +Correct file system errors=Исправить ошибки файловой системы CPU Isolation A reboot is required to apply changes=CPU Isolation: A reboot is required to apply changes CPU isolation is prohibited while system is running in SAFE MODE= -CPU Isolation= +CPU Isolation=Изоляция процессора CPU Pinning Docker= CPU Pinning VM= CPU Pinning= -Current date and time= -Custom attributes use comma to separate numbers=Custom attributes (use comma to separate numbers) -Custom banner= -Custom UPS cable= -Custom= +CRAM-MD5= +Cumulative parity check=Накопительная проверка чётности +Current date and time=Текущая дата и время +Current usage ratio=Текущий коэффициент использования +Custom attributes use comma to separate numbers=Индивидуальные атрибуты (используйте запятую для разделения чисел) +Custom banner=Индивидуальный баннер +Custom UPS cable=Индивидуальный кабель для ИБП +Custom=Индивидуальный custom= -D comma G dot=D comma : G dot -D comma G none=D comma : G none -D comma G space=D comma : G space -D dot G comma=D dot : G comma -D dot G none=D dot : G none -D dot G space=D dot : G space -Daily= -Date and Time= -Date format= -Day of the month= -Day of the week= +D comma G dot=[D] comma : [G] dot +D comma G none=[D] comma : [G] none +D comma G space=[D] comma : [G] space +D dot G comma=[D] dot : [G] comma +D dot G none=[D] dot : [G] none +D dot G space=[D] dot : [G] space +Daily=Ежедневно +Data received=Данных получено +Data sent=Данных отправлено +Date and Time=Дата и время +Date format=Формат даты +Day of the month=День месяца +Day of the week=День недели Day, D Month YYYY= Day, DD.MM.YYYY= Day, DD-MM-YYYY= @@ -108,37 +144,49 @@ Day, Month D, YYYY= Day, YYYY Month D= Day, YYYY-MM-DD= DD-MM-YYYY= -Default appdata storage location= -Default critical disk temperature threshold= -Default critical disk utilization threshold= -Default file system= -Default ISO storage path= -Default network bridge= -Default partition format= +Deactivate=Деактивировать +Deactivating=Деактивация +Default appdata storage location=Место хранения данных приложения по умолчанию +Default critical disk temperature threshold=Порог критической температуры диска по умолчанию +Default critical disk utilization threshold=Порог критического использования диска по умолчанию +Default file system=Файловая система по умолчанию +Default ISO storage path=Путь хранения ISO-файлов по умолчанию +Default network bridge=Сетевой мост по умолчанию +Default partition format=Формат раздела по умолчанию Default SMART attribute notifications= -Default SMART controller type= +Default SMART controller type=Тип контроллера SMART по умолчанию Default SMART notification tolerance level= Default SMART notification value= Default spin down delay= -Default VM storage path= +Default VM storage path=Путь к хранилищу ВМ по умолчанию Default warning disk temperature threshold= Default warning disk utilization threshold= Default Windows VirtIO driver ISO= -Define a TLS certificate= -Delete directory= -Delete vDisk file= -Delete VLAN= -Desired MTU= -Detailed= -Device= -DHCP pool= -directory= -Disk Settings= -Display array totals= -Display device name= -Display position= -Display Settings= +Define a TLS certificate=Определить сертификат TLS +Delete directory=Удалить каталог +Delete Image File=Удалить файл изображения +Delete Peer=Удалить пир +Delete Tunnel=Удалить туннель +Delete tunnel failed= +Delete vDisk file=Удалить файл vDisk +Delete VLAN=Удалить VLAN +Deny=Запретить +Desired MTU=Желаемый MTU +Detailed=Подробно +Device=Устройство +DHCP pool=Пул DHCP +directory=каталог +Disk Settings=Настройки диска +Display array totals=Отображение общих значений массива +Display device name=Отображение имени устройства +Display position=Положение на дисплее +Display Settings=Настройки отображения Display world-wide-name in device ID= +DNS Propagation is PENDING= +DNS Rebinding Protection is ENABLED= +DNS servers=DNS-серверы +docker containers on custom networks need static routing= +Docker custom network type= Docker data-root= Docker directory= Docker LOG maximum file size= @@ -146,310 +194,445 @@ Docker LOG number of files= Docker LOG rotation= Docker only= Docker service= -Docker update notification= +Docker Stop Timeout= +Docker update notification=Уведомление об обновлении докера Docker update= Docker vDisk location= Docker vDisk size= Docker version= +Docker VMs=Docker + VMs Docker volume info= Docker will be available after Array is Started= Docker= -Download Windows VirtIO driver ISO= +Download Windows VirtIO driver ISO=Скачать Windows VirtIO драйвер ISO +Downloading=Скачивание Downstream= -Drag-n-drop a PNG file or click the image at the left= +Drag-n-drop a PNG file or click the image at the left=Перетащите файл PNG или нажмите на изображение слева. Dumb= -Dynamix color theme= -Email recipients= -Email subject prefix= -Email= -Enable auto start= -Enable bonding= -Enable bridging= +Duplicate port entered=Введён повторяющийся порт +Dynamix color theme=Цветовая тема Dynamix +eg=e.g. +Email recipients=Получатели электронной почты +Email subject prefix=Префикс темы электронного письма +Email=Электронное письмо +enable advanced settings view=включить просмотр расширенных настроек +Enable auto start=Включить автоматический запуск +Enable bonding=Включить связывание +Enable bridging=Включить мост Enable disk shares= Enable Docker= -Enable NetBIOS= -Enable NFS= -Enable SMB= +Enable NetBIOS=Включить NetBIOS +Enable NFS=Включить NFS +Enable SMB=Включить SMB +Enable SMB Multi Channel=Включить многоканальный SMB Enable spinup groups= -Enable user shares= -Enable VLANs= -Enable VMs= -Enable WSD= -Enhanced macOS interoperability= -Enter route + gateway + metric= +Enable user shares=Включить общие ресурсы пользователей +Enable VLANs=Включить VLAN +Enable VMs=Включить виртуальные машины +Enable WSD=Включить WSD +encrypted=шифрование +Enhanced macOS interoperability=Улучшенная совместимость с macOS +ensure the peer network is different from=убедитесь, что одноранговая сеть отличается от +ensure the peer networks are different from=убедитесь, что одноранговые сети отличаются от +Enter route + gateway + metric=Введите маршрут + шлюз + метрику Ether= -Ethernet Port= -Event= -Every day= -Every month= -Every week= +Ethernet Port=Порт Ethernet +Event=Событие +Every 2 hours=Каждые 2 часа +Every 3 hours=Каждые 3 часа +Every 4 hours=Каждые 4 часа +Every 6 hours=Каждые 6 часов +Every 8 hours=Каждые 8 часов +Every day=Каждый день +Every hour=Каждый час +Every month=Каждый месяц +Every week=Каждую неделю exceeds Disk Shutdown= -Excluded disks= -Execution error= -Failed to stop= +Excluded disks=Исключенный диск(и) +Execution error=Ошибка выполнения +Fahrenheit=Градус Фаренгейта (°F) +Failed to open=Не удалось открыть +Failed to stop=Не удалось остановить Failure to do so may result in your docker image suffering corruption at a later time= -First day= -First week= -Font size= -Fourth week= -FTP server= -FTP users=FTP user(s) -Gateway= -gateway name or address= -Global Share Settings= -Global SMART Settings= -has been created on unraidnet= -has been updated for unraidnet= -Header custom background color= -Header custom text color= -Header menu= +First day=Первый день +First week=Первая неделя +Flash backup= +Font size=Размер шрифта +Fourth week=Четвертая неделя +FTP server=FTP сервер +FTP Server=FTP сервер +FTP users=FTP пользователь(и) +Full Balance recommended= +gateway name or address=имя или адрес шлюза +Gateway=Шлюз +Generate Key=Сгенерировать ключ +Generate Keypair=Создать пару ключей +Global Share Settings=Глобальные настройки общих ресурсов +Global SMART Settings=Глобальные настройки SMART +Header custom background color=Пользовательский цвет фона заголовка +Header custom meta text color=Пользовательский цвет метатекста заголовка +Header custom secondary text color= +Header custom text color=Пользовательский цвет текста заголовка +Header menu=Меню заголовка +Header show description=Показать описание сервера в заголовке HHMM=HH:MM -Hibernate VMs= -Hide dot files= -Host access to custom networks= +Hibernate VMs=Гибернация VMs +Hide dot files=Скрыть файлы с "точками" +Host access to custom networks=Доступ к пользовательским сетям hosts= -Hourly= -HTML color code of 3 or 6 hexadecimal digits= -HTTP port= -HTTPS port= -Huge= -Identification= -Importance= -Included disks= -Interface description= -Interface Rules= -Invalid email address= -Invalid IPv4 gateway= -Invalid IPv4 range= -Invalid IPv4 subnet= -Invalid IPv6 gateway= -Invalid IPv6 range= -Invalid IPv6 subnet= -Invalid pool address= -Invalid subnet size= -IPv4nn or IPv6nn route=IPv4/nn or IPv6/nn route -IPv4 address A.B.C.D= -IPv4 address assignment= -IPv4 address= +Hourly=Ежечасно +HTML color code of 3 or 6 hexadecimal digits=Цветовой код HTML из 3 или 6 шестнадцатеричных цифр +HTTP port=HTTP порт +HTTPS port=HTTPS порт +Huge=Огромный +Identification=Идентификация +Import Tunnel=Импортировать туннель +Importance=Важно +In most cases, this should be your public WAN IPv4 instead= +In most cases, this should be your public WAN IPv4= +In most cases, this should be your public WAN IPv6 instead= +In most cases, this should be your public WAN IPv6= +inactive=неактивен +Included disks=Included disk(s) +Interface description=Описание интерфейса +Interface Rules=Правила интерфейса +Invalid data=Неверные данные +Invalid email address=Неверный адрес электронной почты +Invalid IPv4 gateway=Неверный шлюз IPv4 +Invalid IPv4 range=Неверный диапазон IPv4 +Invalid IPv4 subnet=Неверная подсеть IPv4 +Invalid IPv6 gateway=Неверный шлюз IPv6 +Invalid IPv6 range=Неверный диапазон IPv6 +Invalid IPv6 subnet=Неверная подсеть IPv6 +Invalid pool address=Неверный адрес пула +Invalid subnet size=Неверный размер подсети +IP address or FQDN=IP-адрес или полное доменное имя +IPv4 address A.B.C.D=IPv4-адрес A.B.C.D +IPv4 address assignment=Назначение IPv4-адреса +IPv4 address=IPv4-адрес IPv4 custom network on interface= -IPv4 default gateway= -IPv4 DNS server assignment= -IPv4 DNS server= -IPv4 IPv6= -IPv4 only= +IPv4 default gateway=Шлюз по умолчанию IPv4 +IPv4 DNS server assignment=Назначение DNS-сервера IPv4 +IPv4 DNS server=DNS-сервер IPv4 +IPv4 IPv6=IPv4 + IPv6 +IPv4 network=Сеть IPv4 +IPv4 only=Только IPv4 +IPv4nn or IPv6nn route=IPv4/nn или IPv6/nn маршрут IPv6 address assignment= IPv6 address nnnnxxxxyyyy=IPv6 address nnnn:xxxx::yyyy -IPv6 address= +IPv6 address=IPv6-адрес IPv6 custom network on interface= -IPv6 default gateway= -IPv6 DNS server assignment= -IPv6 DNS server= -IPv6 only= +IPv6 default gateway=Шлюз по умолчанию IPv6 +IPv6 DNS server assignment=Назначение DNS-сервера IPv6 +IPv6 DNS server=DNS-сервер IPv6 +IPv6 network=Сеть IPv6 +IPv6 only=Только IPv6 IPv6 privacy extensions= -is down= -Isolated CPUs= -Isolation= -Key= +ipvlan= +is down=не работает +is not in the=не находится в +Isolated CPUs=Изолированные процессоры +Isolation=Изоляция +Join=Присоединиться +Key=Ключ kyber= -Language= -Language update= -Language update notification= -Large= -Last day= -Last week= +LAN hub spoke access=LAN hub & spoke access +LAN to LAN access= +Language update notification=Уведомление об обновлении языка +Language update=Обновление языка +Language=Язык +Large=Большой +Last day=Последний день +Last handshake=Последнее рукопожатие +Last week=Прошлая неделя LE Cert Provisioned successfully= -Libvirt Log= -Libvirt storage location= -Libvirt version= -Libvirt volume info= -License key required= -List of VLANs contains duplicate VLAN numbers= +Leave=Покинуть +Libvirt Log=Журнал Libvirt +Libvirt storage location=Место хранения Libvirt +Libvirt vdisk size=Размер виртуального диска Libvirt +Libvirt version=Версия Libvirt +Libvirt volume info=Информация о томе Libvirt +License key required=Требуется лицензионный ключ +List of peers=Список пиров +List of VLANs contains duplicate VLAN numbers=Список VLAN содержит повторяющиеся номера VLAN Listing height= -Local master= +Loading=Загрузка +Local endpoint=Локальная конечная точка +Local gateway uses UPnP=Локальный шлюз использует UPnP +Local master=Локальный мастер +Local name=Локальное название +Local private key=Локальный закрытый ключ +Local public key=Локальный открытый ключ +Local server configuration=Конфигурация локального сервера +Local server uses NAT=Локальный сервер использует NAT Local syslog folder= Local syslog maximum file size= Local syslog number of files= +Local syslog port= Local syslog rotation= -Local syslog server= -Local TLD= -Lost communication= -MAC address= -Mail server port= -Mail server= -Management Access= +Local syslog server=Локальный сервер syslog +Local TLD=Локальный TLD +Local tunnel address IPv6=Адрес локального туннеля IPv6 +Local tunnel address=Адрес локального туннеля +Local tunnel firewall= +Local tunnel network pool IPv6= +Local tunnel network pool= +Lost communication=Связь потеряна +MAC address mismatch=Несоответствие MAC-адреса +MAC address=MAC-адрес +macvlan= +Mail server port=Порт почтового сервера +Mail server=Почтовый сервер +Manage password=Управление паролем +Manage=Управление +Management Access=Управление доступом +mandatory= Manual= -may conflict with well-known services= member of= -Metric= +Metric=Метрика Mirror syslog to flash= -Missing subnet size= +Missing subnet size=Отсутствует размер подсети MM-DD-YYYY= ModBus= -Modify with caution unable to validate path until Array is Started=Modify with caution: unable to validate path until Array is Started -Month of the year= -Monthly= -Move now= +Modify with caution unable to validate path until Array is Started=Изменяйте с осторожностью: невозможно проверить путь, пока массив не запущен +Month of the year=Месяц в году +Monthly=Ежемесячно +Move now=Переместить сейчас +Mover is running= Mover logging= -Mover Settings= Mover schedule= +Mover Settings= mq-deadline= +MTU size=Размер MTU Multi-function= -must be a file directory provided= +Must be signed in to Unraidnet to provision cert=Must be signed in to Unraid.net to provision cert +name or ip address=имя или IP-адрес Net= -Network protocol= -Network Services= -Network Settings= -Never check= -Never send= -New date and time= +Network protocol=Сетевой протокол +Network Services=Сетевые службы +Network Settings=Настройки сети +Never check=Никогда не проверять +Never send=Никогда не отправлять +New date and time=Новая дата и время NFS= -No battery detected= -No Cache disk present= +No Balance required= +No battery detected=Батарея не обнаружена +No Cache device present=Нет устройств кеширования +No Cache disk present=Кэш-диск отсутствует +No change to report= No CPU pinning available. Docker service must be started= No CPU pinning available. VM service must be started= -No Parity disk present= -Nominal Power= -Non-recommended port= -Non-tabbed= +no name=без имени +No Parity disk present=Диск с контролем чётности отсутствует +No Reply=Без ответа +Nominal Power=Номинальная мощность +Non-tabbed=Без вкладок +Not activated=Не активирован Not allowed to assign ZERO cores= Not compatible with NetBIOS= -not configured= -not set= -Nothing to do= -Notices= -Notification Agents= -Notification entity= -Notification Settings= -Notifications display= -NTP server= -Number format= -Number scaling= -Obtaining DNSv4 server= -Obtaining DNSv6 server= -Obtaining IPv4 address= -Obtaining IPv4 gateway= -Obtaining IPv6 address= -Obtaining IPv6 gateway= -obtaining= -On battery= -One or more paths do not exist= +not configured=не настроено +Not present=Отсутствует +not received=не получено +not set=не задано +Not up-to-date=Не в актуальном состоянии +not used=не используется +Nothing to do=Нечего делать +Notices=Уведомления +Notification Agents=Агенты уведомлений +Notification entity=Объекты уведомлений +Notification Settings=Настройки уведомлений +Notifications display=Отображение уведомлений +NTP server=NTP сервер +Number format=Числовой формат +Number scaling=Масштабирование числа +Obtaining DNSv4 server=Получение сервера DNSv4 +Obtaining DNSv6 server=Получение сервера DNSv6 +Obtaining IPv4 address=Получение IPv4-адреса +Obtaining IPv4 gateway=Получение шлюза IPv4 +Obtaining IPv6 address=Получение IPv6-адреса +Obtaining IPv6 gateway=Получение шлюза IPv6 +obtaining=получение +On battery=От батареи +One or more paths do not exist=Один или несколько путей не существуют Online boost=Online (boost) Online trim=Online (trim) -Online= -Only alphanumeric characters= -Only PNG images are allowed= -Oops= -optional metric lowest is preferred=optional metric (lowest is preferred) -optional metric lowest is preferred, 0 is no default gateway=optional metric (lowest is preferred, 0 is no default gateway) -Page view= -Parity Check= -Password= -Path does not exist= +Online=В сети +Only alphanumeric characters=Только буквенно-цифровые символы +Only PNG images are allowed=Разрешены только изображения PNG +Oops=Ой, Мама! +optional metric lowest is preferred, 0 is no default gateway=необязательная метрика (предпочтительнее наименьшее значение, 0 означает отсутствие шлюза по умолчанию) +optional metric lowest is preferred=необязательная метрика (предпочтительнее наименьшее значение) +or=или +Page view=Вид страницы +Parity Check=Проверка чётности +Password=Пароль +Path does not exist=Путь не существует PCIe ACS override= PCnet= -Placement of Users menu= -Please disable the VM function= -Please do this NOW= -Please enter a valid gateway= -Please enter a valid range= -Please enter a valid sending email address= -Please enter a valid subnet= -Plugins update notification= -Plugins update= +Peer allowed IPs= +Peer DNS server= +Peer endpoint= +Peer name= +Peer preshared key= +Peer private key= +Peer public key= +Peer tunnel address IPv6= +Peer tunnel address= +Peer type of access= +Peer update required= +Persistent keepalive=Постоянная поддержка активности +Ping=Пинг +Placement of Users menu=Размещение меню пользователей +Please consider re-applying all configurations=Пожалуйста, рассмотрите возможность повторного применения всех конфигураций +Please disable the VM function=Пожалуйста, отключите функцию виртуальной машины +Please do this NOW=Пожалуйста, сделайте это СЕЙЧАС +Please enter a valid gateway=Пожалуйста, введите действующий шлюз +Please enter a valid range=Пожалуйста, введите допустимый диапазон +Please enter a valid sending email address=Пожалуйста, введите действующий адрес электронной почты для отправки +Please enter a valid subnet=Пожалуйста, введите действительную подсеть +Please note that the flash backup is not encrypted at this time=Please note that the flash backup is not encrypted at this time. +Please Reboot system to make new rules active=Please **Reboot** system to make new rules active +Plugins update notification=Уведомление об обновлении плагинов +Plugins update=Обновление плагинов Pool address is out of range= Pool subnet size is not defined= Pool subnet size is too large= +Port %s is already in use by other services=Порт %s уже используется другими службами +Port %s is duplicated=Порт %s дублируется +Port %s is out of range minimum 1 maximum 65535=Порт %s вне допустимого диапазона (1-65535) +Port already in use=Порт уже используется Port Down= +Port out of range=Порт вне диапазона Port Up= Preserve user defined networks= -Preset service= -Priority in header= -Protocol= +Preset service=Предустановленный сервис +Priority in header=Приоритет в заголовке +Protocol=Протокол Provision= +QEMU version=Версия QEMU readmodifywrite=read/modify/write +recommended=рекомендуется reconstruct write= Refreshing= -Registration key required= -Remote syslog server= -Remove Windows VirtIO driver ISO= -resolution= -Route= -Routing Table= -Rules= -Runtime left to initiate shutdown= -Runtime Left= -Samba extra configuration= -Scheduled parity check= -Scheduler= +Registration key required=Требуется регистрационный ключ +Reinitialize=Переинициализировать +Reinitializing=Повторная инициализация +Remark configure your router with port forwarding of port=Примечание: настройте в маршрутизаторе переадресацию портов. +Remark=Примечание +Remote access to LAN=Удаленный доступ к локальной сети +Remote access to server=Удаленный доступ к серверу +Remote peer configuration= +Remote syslog port=Порт удалённого syslog +Remote syslog server=Сервер удалённого syslog +Remote tunneled access= +Remove Windows VirtIO driver ISO=Удалить Windows VirtIO драйвер ISO +Replied=Ответ получен +resolution=разрешение +Restore default image=Восстановить изображение по умолчанию +Route=Маршрут +Routing Table=Таблица маршрутизации +Rule=Правило +Rules contain duplicate MAC address assignments=Правила содержат повторяющиеся назначения MAC-адресов +Rules=Правила +Runtime left to initiate shutdown=Оставшееся время работы, до инициирования выключения +Runtime Left=Оставшееся время работы +Samba extra configuration=Дополнительная конфигурация Samba +Scheduled parity check=Запланированная проверка чётности +Scheduler=Планировщик Scrub= -Second week= -See Help for more details and workarounds= -see interface= -Send every hour= -Send every two hours= -Send four times a day= -Send once a day= -Send once a month= -Send once a week= -Send three times a day= -Send twice a day= -Sending email address= -Server name= +Scrub schedule= +Second week=Вторая неделя +See Help for more details and workarounds=Смотрите Справку для получения дополнительных сведений и обходных путей. +see interface=см. интерфейс +Send crash information to Unraid developers=Отправить информацию о сбое разработчикам Unraid +Send every hour=Отправлять каждый час +Send every two hours=Отправлять каждые два часа +Send four times a day=Отправлять четыре раза в день +Send once a day=Отправлять раз в день +Send once a month=Отправлять раз в месяц +Send once a week=Отправлять раз в неделю +Send three times a day=Отправлять трижды в день +Send twice a day=Отправлять дважды в день +Sending email address=Адрес электронной почты для отправки +Server hub spoke access=Server hub & spoke access +Server name=Имя сервера +Server to server access=Сервер для доступа к серверу Server was unable to provision SSL certificate= -Setting disabled in safe mode=Setting disabled in **safe mode** -Settings menu= -Show array utilization indicator= -Show banner= -Show Dashboard apps= +Set password=Установить пароль +Setting disabled in safe mode=В **безопасном режиме** настройки отключены +Settings menu=Меню настроек +Show array utilization indicator=Показать индикатор использования массива +Show banner=Показывать баннер +Show banner background color fade= +Show Dashboard apps=Показать приложения в приборной панели +Show Peer Config= Shutdown time-out= -Shutdown VMs= +Shutdown VMs=Завершить работу виртуальных машин +shutdown=завершить работу +Sign In to Unraidnet required=Sign In to Unraid.net required Simple= -Small= +Small=Маленький Smart= SMB Extras= -SMB Settings= +SMB Settings=Настройки SMB SMB= -SMTP Settings= +SMTP Settings=Настройки SMTP SNMP= -Sorry, an error occurred in processing your SSL certificate= -Sorry, an error occurred updating unraidnet DNS records= -SSH port= -Start APC UPS daemon= -Start page= -Static= -Stop %s to make changes, see=Stop **%s** to make changes, see -Store notifications to flash= -Subject= -Subnet= -success= -Summarized= -Syslog Server= -System notifications= -System Setting= -System Settings= -Tabbed= -TELNET port= -Temperature unit= -Template Authoring Mode= -Test running= +Sorry, an error occurred in processing your SSL certificate=К сожалению, при обработке вашего SSL-сертификата произошла ошибка +Sorry, an error occurred updating unraidnet DNS records=К сожалению, при обновлении DNS-записей unraid.net произошла ошибка +SSH port=SSH порт +Start APC UPS daemon=Запустить сервис APC UPS +Start page=Начальная страница +Static=Статический +Stop %s to make changes, see=Остановите **%s**, чтобы внести изменения, см. +Stop corresponding docker containers= +Store notifications to flash=Сохранять уведомления на флешку +Subject=Тема +Subnet=Подсеть +subnet=подсеть +success=успешно +Summarized=Обобщённо +Syslog Server=Сервер Syslog +System notifications=Системные уведомления +System Setting=Системная настройка +System Settings=Системные настройки +Tabbed=Вкладки +TCP= +TELNET port=TELNET порт +Temperature unit=Единица измерения температуры +Template Authoring Mode=Режим создания шаблонов +Terminal font size=Размер шрифта в терминале +Test running=Тест запущен +Test=Тест Text - Bar color=Text - Bar (color) Text - Bar gray=Text - Bar (gray) -Text= -Third week= -This is required to create VMs in KVM= -this mode requires a network switch with proper setup and support= -Time format= -Time of the day= -Time on battery before shutdown= -Time zone= +Text=Текст +The Local endpoint does not resolve to an IPv4 address= +The Local endpoint does not resolve to an IPv6 address= +The Local endpoint resolves to= +The Local tunnel network pool cannot be in= +The Local tunnel network pool IPv6 cannot be in= +Third week=Третья неделя +This is required to create VMs in KVM=Это необходимо для создания виртуальных машин в KVM. +this mode requires a network switch with proper setup and support=для этого режима требуется сетевой коммутатор с правильной настройкой и поддержкой. +this must be the only peer in the tunnel and sole active tunnel when in use= +This removes any connections running over this tunnel=Это удалит все соединения, проходящие через этот туннель. +This Unraid Server was unreachable from the outside= +Time format=Формат времени +Time of the day=Время дня +Time on battery before shutdown=Время работы от батареи до выключения +Time zone=Часовой пояс time-out= -Timestamp= -TLS certificate location= -Toggle thread to containers= -top-left= -top-right= +Timestamp=Отметка времени +TLS certificate location=Расположение сертификата TLS +to= +Toggle keys=Переключить ключи +Toggle thread to containers=Переключить поток на контейнеры +Toggle view=Переключить вид +top-left=вверху слева +top-right=вверху справа Tunable enable Direct IO=Tunable (enable Direct IO) -Tunable enable NCQ=Tunable enable (NCQ) +Tunable enable NCQ=Tunable (enable NCQ) Tunable fuse_remember=Tunable (fuse_remember) Tunable md_num_stripes=Tunable (md_num_stripes) Tunable md_queue_limit=Tunable (md_queue_limit) @@ -459,130 +642,120 @@ Tunable nr_requests=Tunable (nr_requests) Tunable poll_attributes=Tunable (poll_attributes) Tunable scheduler=Tunable (scheduler) Tunable support Hard Links=Tunable (support Hard Links) -Turn off UPS after shutdown= +Tunnel has running containers attached= +tunnel is inactive=туннель неактивен +Turn off UPS after shutdown=Выключить ИБП после выключения +UDP= +Unable to register this Unraid Server=Невозможно зарегистрировать этот Unraid сервер ; Keep the original plugin name in settings -Unassigned Devices=Unassigned Devices -Unraid OS update notification= -Unraid OS update= -Update DNS= -updating= +Unassigned Devices=Неназначенные устройства +Unraid OS update notification=Уведомление об обновлении Unraid OS +Unraid OS update=Обновление Unraid OS +Unraidnet account status=Статус учётной записи Unraid.net +Unraidnet Status=Статус Unraid.net +Update DNS=Обновить DNS +updating=обновление +Updating=Обновление +Upgrade Cert= +UPnP forwarding not set=UPnP: forwarding not set +UPnP state changed to=Состояние UPnP изменено на +UPnP tunnel is inactive=UPnP: туннель неактивен Upon host shutdown= -UPS cable= -UPS Details= -UPS Load= -UPS Settings= -UPS Status= -UPS type= +UPS cable=Кабель ИБП +UPS Details=Подробности про ИБП +UPS Load=Нагрузка ИБП +UPS Settings=Настройки ИБП +UPS Status=Статус ИБП +UPS type=Тип ИБП USB= -Use cache device= -Use NTP= -Use SSH= -Use SSLTLS=Use SSL/TLS -Use STARTTLS= -Use TELNET= -Use UPnP= +Use image name dockerimg or docker-xfsimg or select a folder=Use image name docker.img or docker-xfs.img or select a folder +Use NTP=Использовать NTP +Use only letters A-Z, digits or space,dash,underscore=Используйте только буквы A-Z, цифры или пробел, тире, подчеркивание +Use SSH=Использовать SSH +Use SSLTLS=Использовать SSL/TLS +Use STARTTLS=Использовать STARTTLS +Use TELNET=Использовать TELNET +Use UPnP=Использовать UPnP Used Free columns=Used / Free columns -User Preferences= -User shares not enabled= -User Utilities= -Username= +User Preferences=Пользовательские настройки +User root=Пользователь 'root' +User shares not enabled=Общие ресурсы пользователей не включены +User Utilities=Пользовательские утилиты +Username=Имя пользователя user-set= -value must be a number= -Value= -Very large= -Very small= -VFIO allow unsafe interrupts= -View libvirt log= -view= -VLAN assignment mismatch= -VLAN number= -VM Manager= -VM shutdown time-out= -VM= -VMs only= -VMs will be available after Array is Started= -VPN Manager= -Warnings= -Watts= -Week of the month= -Weekly= -Workgroup Settings= -Workgroup= +value must be a number=значение должно быть числом +Value=Значение +Very large=Очень большой +Very small=Очень маленький +VFIO allow unsafe interrupts=VFIO разрешает небезопасные прерывания +View libvirt log=Просмотр журнала libvirt +View Local Config=Просмотр локальной конфигурации +View Peer Config= +view=просмотр +VLAN assignment mismatch=Несоответствие назначения VLAN +VLAN number=Номер VLAN +VM Manager=Менеджер ВМ +VM manager=Менеджер ВМ +VM Settings A reboot is required to apply changes=VM Settings: A reboot is required to apply changes +VM shutdown time-out=Тайм-аут завершения работы ВМ +VM=ВМ +VMs only=Только виртуальные машины +VMs will be available after Array is Started=Виртуальные машины будут доступны после запуска массива. +VPN Manager=VPN-менеджер +VPN tunnel for docker containers only= +VPN tunneled access=VPN-туннельный доступ +VPN tunneled access for docker= +VPN tunneled access for system= +WAN Port=WAN порт +Warnings=Предупреждения +Watts=Ватт +Week of the month=Неделя месяца +Weekly=Еженедельно +WireGuard Configuration=Конфигурация WireGuard +Workgroup Settings=Настройки рабочей группы +Workgroup=Рабочая группа Write corrections to parity disk= -WSD options experimental= +WSD options experimental=Параметры WSD [экспериментальные] xfs vDisk= -Yearly= +Yearly=Ежегодно +You must be signed in to Unraidnet in order to generate an Unraidnet SSL certificate=You must be signed in to Unraid.net in order to generate an Unraid.net SSL certificate Your existing Docker image file needs to be recreated due to an issue from an earlier beta of Unraid 6= -Your hardware does not have Intel VT-x or AMD-V capability= -Your Lets Encrypt SSL Certificate has been provisioned and a DNS record for local IP address= -Your Lets Encrypt SSL Certificate has been renewed= -Your local IP address= +Your hardware does not have Intel VT-x or AMD-V capability=Ваше оборудование не поддерживает Intel VT-x или AMD-V +Your Lets Encrypt SSL Certificate has been provisioned and a DNS record for local IP address=Ваш SSL-сертификат Let's Encrypt подготовлен и есть запись DNS для локального IP-адреса. +Your Lets Encrypt SSL Certificate has been renewed=Ваш SSL-сертификат Let's Encrypt был продлён +Your local IP address %s has been updated for unraidnet=Your local IP address %s has been updated for unraid.net Your router or DNS server has DNS rebinding protection enabled, preventing= -YYYY-MM-DD= +Your server has been registered=Ваш сервер зарегистрирован +Your Unraid Server is reachable from the internet=Ваш Unraid сервер доступен из Интернет +YYYY-MM-DD=DD.MM.YYYY -; New entries - 2021-03-14 -Activate= -Activated= -Activating= -Allow Remote Access= -Applying= -Are you sure you want to erase all change history in both local and unraidnet remote=Are you sure you want to erase all change history in both local and unraid.net remote? +; My Servers plugin Are you sure you want pause communication with your remote flash backup on unraidnet=Are you sure you want pause communication with your remote flash backup on unraid.net? -Changes= -Checking= -Deactivate= -Deactivating= -Delete Image File= +Are you sure you want to erase all change history in both local and unraidnet remote=Are you sure you want to erase all change history in both local and unraid.net remote? Disabled until you Provision an unraidnet SSL Cert and set SSL-TLS to Auto=Disabled until you Provision an unraid.net SSL Cert and set SSL-TLS to Auto +Disabled until you Provision an unraidnet SSL Cert=Disabled until you Provision an unraid.net SSL Cert Disabled until your root user account is password-protected= -Docker Stop Timeout= -Flash backup= -Header show description= -Join= -Leave= -Libvirt vdisk size= -Loading= -MAC address mismatch= +Enable Transparent 2FA for Local Access= +Enable Transparent 2FA for Remote Access= +In order to activate Flash Backup there must be at least 1GB of free space on your flash drive=In order to activate Flash Backup there must be at least 1GB of free space on your flash drive. +Local T2FA requires a myunraidnet certificate=Local T2FA requires a *.myunraid.net certificate +Local T2FA requires Unraid 610 or higher and a myunraidnet certificate=Local T2FA requires Unraid 6.10 or higher and a *.myunraid.net certificate +Local T2FA requires Unraid 610 or higher=Local T2FA requires Unraid 6.10 or higher +Local T2FA requires Use SSLTLS to be Auto and a myunraidnet certificate=Local T2FA requires Use SSL/TLS to be Auto and a *.myunraid.net certificate +Local T2FA requires Use SSLTLS to be Auto and Unraid 610 or higher=Local T2FA requires Use SSL/TLS to be Auto and Unraid 6.10 or higher +Local T2FA requires Use SSLTLS to be Auto, Unraid 610 or higher, and a myunraidnet certificate=Local T2FA requires Use SSL/TLS to be Auto, Unraid 6.10 or higher, and a *.myunraid.net certificate +Local T2FA requires Use SSLTLS to be Auto=Local T2FA requires Use SSL/TLS to be Auto More information=More information. -Mover is running= -name or ip address= -Not activated= -Not up-to-date= -Please note that the flash backup is not encrypted at this time=Please note that the flash backup is not encrypted at this time. -Please Reboot system to make new rules active=Please **Reboot** system to make new rules active -QEMU version= -Reinitialize= -Reinitializing= -Remark configure your router with port forwarding of port=Remark: configure your router with port forwarding of port -Rules contain duplicate MAC address assignments= -Send crash information to Unraid developers= -Test= -This Unraid Server was unreachable from the outside= -to= -Unable to register this Unraid Server= -Unraidnet Status=Unraid.net Status -Updating= -Use image name dockerimg or docker-xfsimg or select a folder=Use image name docker.img or docker-xfs.img or select a folder -WAN Port= -Your server has been registered= -Your Unraid Server is reachable from the internet= - -; New entries - 2021-03-14 -Celsius= -CRAM-MD5= -Docker VMs=Docker + VMs -encrypted= -Every 2 hours= -Every 3 hours= -Every 4 hours= -Every 6 hours= -Every 8 hours= -Every hour= -Failed to open= -Fahrenheit= -inactive= -No Cache device present= -shutdown= -TCP= -UDP= -VM manager= +port= +Remote T2FA requires a myunraidnet certificate=Remote T2FA requires a *.myunraid.net certificate +Remote T2FA requires Remote Access to be enabled and a myunraidnet certificate=Remote T2FA requires Remote Access to be enabled and a *.myunraid.net certificate +Remote T2FA requires Remote Access to be enabled and Unraid 610 or higher=Remote T2FA requires Remote Access to be enabled and Unraid 6.10 or higher +Remote T2FA requires Remote Access to be enabled, Unraid 610 or higher, and a myunraidnet certificate=Remote T2FA requires Remote Access to be enabled, Unraid 6.10 or higher, and a *.myunraid.net certificate +Remote T2FA requires Remote Access to be enabled= +Remote T2FA requires Unraid 610 or higher and a myunraidnet certificate=Remote T2FA requires Unraid 6.10 or higher and a *.myunraid.net certificate +Remote T2FA requires Unraid 610 or higher=Remote T2FA requires Unraid 6.10 or higher +The Unraid server is unreachable from outside your network Be sure you have configured your router to forward port=The Unraid server is unreachable from outside your network. Be sure you have configured your router to forward port +to the Unraid server at= +Transient errors in this log can be ignored unless you are having issues= +Unraid API extra origins= +View Flash Backup Error Log= diff --git a/shares.txt b/shares.txt index 4a0db78..f4e8197 100644 --- a/shares.txt +++ b/shares.txt @@ -1,65 +1,64 @@ -Add Share= -All files encrypted= -All files protected= -All files unprotected= -Allocation method= +Add Share=Добавить общий ресурс +All files encrypted=Все файлы зашифрованы +All files protected=Все файлы защищены +All files unprotected=Все файлы незащищены +Allocation method=Метод размещения Array must be Started to view Shares=Array must be **Started** to view Shares -Automatically split any directory as required= -Automatically split only the top five directory levels as required= -Automatically split only the top four directory levels as required= -Automatically split only the top level directory as required= -Automatically split only the top three directory levels as required= -Automatically split only the top two directory levels as required= -Comments= -Compute All= -Compute= -Disk Shares= -Do not use reserved names= -Do not use pool names= +Automatically split any directory as required=Автоматически разделять любой каталог по мере необходимости +Automatically split only the top five directory levels as required=Автоматически разделять только пять верхних уровней каталогов по мере необходимости +Automatically split only the top four directory levels as required=Автоматически разделять только четыре верхних уровня каталогов по мере необходимости +Automatically split only the top level directory as required=Автоматически разделять только каталог верхнего уровня по мере необходимости +Automatically split only the top three directory levels as required=Автоматически разделять только три верхних уровня каталогов по мере необходимости +Automatically split only the top two directory levels as required=Автоматически разделять только два верхних уровня каталогов по мере необходимости +Comments=Комментарии +Compute All=Посчитать всё +Compute=Посчитать +Disk Shares=Общий ресурс к дискам +Do not use reserved names=Не используйте зарезервированные имена +Do not use pool names=Не используйте имена пулов Enable Copy-on-write= -Enter a name for the share= -Excluded disks= -Export= +Enter a name for the share=Введите имя для общего ресурса +Excluded disks=Исключённые диски +Export=Экспорт Fill-up= -Free= -has been deleted= +Free=Свободно +has been deleted=был удален HDD= High-water= -Included disks= -Invalid Characters= -Invalid share name= -Manual do not automatically split directories=Manual: do not automatically split directories -Minimum free space= -Missing share name= +Included disks=Включённые диски +Invalid Characters=Недопустимые символы +Invalid share name=Недопустимое имя общего ресурса +Manual do not automatically split directories=Вручную: не разделять каталоги автоматически +Minimum free space=Минимум свободного места +Missing share name=Отсутствует имя общего ресурса Most-free= Mover takes no action= Mover transfers files from array to cache= Mover transfers files from cache to array= -next user share= -Only= -Prefer= -previous user share= -Read= -Recompute= -Rule= -Select cache pool= +next user share=следующий общий ресурс пользователя +Only=Только +Prefer=Предпочитать +previous user share=предыдущий общий ресурс пользователя +Read=Чтение +Recompute=Пересчитать +Rule=Правило +Select cache pool=Выберите пул кешей Set when adding new share only= -Share contains data= -Share is empty= +Share contains data=Общий ресурс содержит данные +Share is empty=Общий ресурс пуст Share is outside the list of designated disks= -Share Settings= -Share status= -Size= -Some or all files unencrypted= -Some or all files unprotected= +Share Settings=Настройки общего ресурса +Share status=Статус общего ресурса +Size=Размер +Some or all files unencrypted=Некоторые или все файлы не зашифрованы +Some or all files unprotected=Некоторые или все файлы незащищены Split level= SSD= There are no exportable disk shares= There are no exportable user shares= -Time Machine volume size limit= -Unknown encryption state= +Time Machine volume size limit=Ограничение размера тома Time Machine +Unknown encryption state=Неизвестное состояние шифрования Use cache pool for new filesdirectories=Use cache pool (for new files/directories) -User Shares= -Volume dbpath= -Write= -You cannot use the following within share names= +User Shares=Общие ресурсы пользователей +Write=Запись +You cannot use the following within share names=Вы не можете использовать следующие имена в общих ресурсов diff --git a/tools.txt b/tools.txt index d5d7761..e1eac1a 100644 --- a/tools.txt +++ b/tools.txt @@ -1,181 +1,192 @@ A registration replacement key has been created for USB Flash GUID= -About= -alert= -An email has been sent to= -and= -Anonymize diagnostics= -Anytime= -Archived Notifications= -Are you sure= -Array has been Reset=Array has been **Reset** -Array must be Started to change permissions=Array must be **Started** to change permissions -Array must be Stopped to change=Array must be **Stopped** to change -Array= -Author= -Blacklisted USB Flash GUID= -Branch= -By using this software, you agree with our= -Cache slots= -Cannot connect to key-server= -Check for Updates= -click Install Key=click Install Key -collecting diagnostic information this may take several minutes=collecting diagnostic information (this may take several minutes) -Component= -Credits= -Data slots= -Delete notification= -Developer= -Diagnostics= -Disks= -Display Settings= -End-User License Agreement= -Enter URL of language pack XML file= +About=О системе +alert=тревога +An email has been sent to=E-mail был отправлен +and=и +Anonymize diagnostics=Анонимная диагностика +Anytime=Любое время +Archived Notifications=Архивные уведомления +Are you sure=Вы уверены +Array has been Reset=Массив **сброшен** +Array must be Started to change permissions=Чтобы изменить разрешения, массив должен быть **запущен** +Array must be Stopped to change=Чтобы изменить массив, необходимо его **Остановить** +Array slots=Слоты массива +Array=Массив +Author=Автор +Beta= +Blacklisted USB Flash GUID=GUID флэш-памяти USB, занесён в черный список +Branch=Ветка +By using this software, you agree with our=Используя это программное обеспечение, вы соглашаетесь с нашими +Cache slots=Слоты для кеша +Cannot connect to key-server=Не удается подключиться к серверу ключей +Check for Updates=Проверить обновления +click Install Key=нажмите Установить ключ +collecting diagnostic information this may take several minutes=сбор диагностической информации (это может занять несколько минут) +Component=Компонент +Credits=Авторы +Data slots=Слоты данных +Delete all notifications=Удалить все уведомления +Delete notification=Удалить уведомление +Developer=Разработчик +Diagnostics=Диагностика +Disks=Диски +Display Settings=Настройки отображения +Downloading=Скачивание +End-User License Agreement=Лицензионное соглашение конечного пользователя +Enter URL of language pack XML file=ведите URL-адрес XML-файла языкового пакета Error accessing your physical USB Flash boot device= -EULA= -Event= -Expiration= -Extend= -extended= -Get Trial Key= -Hardware Profile= -Hide Details= -If you do not receive an email, please check your spam or junk-email folder= -Importance= -Important= -Install= -Installed languages= +EULA=Пользовательское соглашение +Event=Событие +Expiration=Срок действия +Extend=Продлить +extended=расширенный +Get Trial Key=Получить пробный ключ +Hardware Profile=Профиль оборудования +Hide Details=Скрыть детали +If you do not receive an email, please check your spam or junk-email folder=Если вы не получили письмо, проверьте папку со спамом или нежелательной почтой. +Importance=Важность +Important=Важное +Install Language=Установить язык +Install=Установить +Installed languages=Установленные языки Invalid Trial Installation=Invalid *Trial* Installation -It will collect all of the system hardware information, remove any serial numbers, and securely upload it to LimeTech= -Key file URL= -Language support added= -Language support deleted= -Language= -Missing Key File= -Missing Language= -Network Settings= -New Config= -New Permissions= -No notifications present= -No personal information such as user names, passwords, or any other file contents is included in the hardware profile=No personal information such as user names, passwords, or any other file contents is included in the hardware profile -normal= -Only ZIP files are allowed= -Page Map= -Parity slots= -Please check your= -Please select a language before proceeding= -Please= -Preserve current assignments= -previous= -Privacy Policy= -Processes= -Purchase Key= +It will collect all of the system hardware information, remove any serial numbers, and securely upload it to LimeTech=Она соберёт всю информацию об аппаратном обеспечении системы, удалит все серийные номера и безопасно отправит её в LimeTech. +Key file URL=URL-адрес файла ключа +Language support added=Добавлена языковая поддержка +Language support deleted=Языковая поддержка удалена +Language=Язык +Missing Key File=Отсутствует файл ключа +Missing Language=Отсутствует язык +Network Settings=Настройки сети +New Config=Новая конфигурация +New Permissions=Новые разрешения +Next= +No notifications present=Уведомлений нет +No personal information such as user names, passwords, or any other file contents is included in the hardware profile=Никакая личная информация, такая как имена пользователей, пароли или содержимое файлов, не включается в профиль оборудования. +normal=обычное +Only ZIP files are allowed=Разрешены только ZIP-файлы +Page Map=Карта страниц +Parity slots=Слоты четности +Please check your=Пожалуйста, проверьте свой +please configure=пожалуйста, настройте +Please select a language before proceeding=Пожалуйста, выберите язык, прежде чем продолжить +Please=Пожалуйста +Pool slots=Слоты пула +Preserve current assignments=Сохранить текущие назначения +previous=предыдущий +Privacy Policy=Политика конфиденциальности +Processes=Процессы +Purchase Key=Купить ключ Registered GUID= -Registered on= -Registered to= +Registered on=Дата регистрации +Registered to=Зарегистрировано registering USB Flash GUID= -Release has been withdrawn= -Remove the installed language= -Replaceable= -Request Extension= -Request Trial Extension= -Restore= -See= -Select language file= -Select language= -Show Details= -slots= -Subject= -System Devices= -System Update Check= -Text= -Thank you for choosing Unraid OS= +Release has been withdrawn=Релиз был отозван +Remove the installed language=Удалите установленный язык +Replaceable=Заменяемый +Request Extension=Запросить продление +Request Trial Extension=Запросить продление пробной версии +Restore=Восстановить +See=Посетите +Select language file=Выберите языковой файл +Select language=Выберите язык +Show Details=Показать детали +slots=слоты +Stable= +Subject=Тема +System Devices=Системные устройства +System Update Check=Проверка обновлений системы +Text=Текст +Thank you for choosing Unraid OS=Спасибо, что выбрали Unraid OS Thank you for registering USB Flash GUID= -Thank you for trying Unraid OS= +Thank you for trying Unraid OS=Спасибо, что попробовали Unraid OS The registered GUID does not match the USB Flash boot device GUID= There is a physical problem accessing your USB Flash boot device= -this may take several minutes= +this may take several minutes=это займет несколько минут This release has been withdrawn for use with Trial keys=This release has been withdrawn for use with *Trial* keys -This server has %s attached storage device= -This server has %s attached storage devices= -This utility is used for troubleshooting purposes= -This will delete all notification files= -This will update folder file permissions=This will update folder & file permissions -Time= -To install a registration key, paste the key file URL in the box below and click Install Key=To install a registration key, paste the key file URL in the box below and click **Install Key** -to select your language= -To support more storage devices as your server grows, click Upgrade Key below=To support more storage devices as your server grows, click *Upgrade Key* below -Trial key expires on=***Trial*** key expires on -Trial= -Update OS= -Upgrade Key= -uploading hardware information= +This server has %s attached storage device=К этому серверу подключено %s запоминающее устройство +This server has %s attached storage devices=К этому серверу подключено %s запоминающих устройств +This utility is used for troubleshooting purposes=Эта утилита используется для устранения неполадок. +This will delete all notification files=Это удалит все файлы уведомлений. +This will update folder file permissions=Это обновит права доступа к папкам и файлам +Time=Время +To install a registration key, paste the key file URL in the box below and click Install Key=Чтобы установить регистрационный ключ, вставьте URL-адрес файла ключа в поле ниже и нажмите **Установить ключ**. +to select your language=чтобы выбрать свой язык +Trial key expires on=Срок действия ***пробной*** версии истекает +Trial=Пробная +Update OS=Обновление ОС +Upgrade Key=Обновление ключа +Uploaded= +uploading hardware information=загрузка информации об оборудовании Uploading= -Use this to develop language packs= -Use this to install official language packs= -User Shares= -User= -Vars= -warning= -webGUI= -When received, please paste the URL into the Key file URL box and=When received, please paste the URL into the Key file URL box and -Wrong File Extension= -You havent sent Limetech your hardware profile yet=You haven't sent Limetech your hardware profile yet +Use this to develop language packs=Используйте это для разработки языковых пакетов +Use this to install official language packs=Используйте это для установки официальных языковых пакетов +User Shares=Общие ресурсы пользователей +User=Пользователь +Vars=Переменные +VFIO-PCI Log= +View VFIO-PCI Log= +warning=предупреждение +webGUI=Веб-интерфейс +When received, please paste the URL into the Key file URL box and=When received, please paste the URL into the *Key file URL* box and +Wrong File Extension=Неверное расширение файла +You havent sent Limetech your hardware profile yet=Вы ещё не отправили в Limetech свой профиль оборудования Your hardware profile was last submitted on= -Your Trial key has expired=Your *Trial* key has expired -Your Trial key requires an internet connection=Your *Trial* key requires an internet connection +Your Trial key has expired=Срок действия вашего *пробного* ключа истёк +Your Trial key requires an internet connection=Ваш *пробный* ключ требует подключения к Интернету ; Sysdevs text - added May 18, 2020 -A reboot is required to apply changes= -ALERT= +A reboot is required to apply changes=Для применения изменений требуется перезагрузка. +ALERT=ТРЕВОГА Bind selected to VFIO at Boot= -CPU Thread Pairings= -Changes saved= +CPU Thread Pairings=Сопряжение потоков ЦП +Changes saved=Изменения сохранены Function Level Reset FLR supported=Function Level Reset (FLR) supported -In use by Unraid= -Kernel driver in use vfio-pci=Kernel driver in use: vfio-pci -No changes= -PCI Devices and IOMMU Groups= -Reboot to take effect= -SCSI Devices= +In use by Unraid=Используется Unraid +Kernel driver in use vfio-pci=Используемый драйвер ядра: vfio-pci +No changes=Без изменений +PCI Devices and IOMMU Groups=Устройства PCI и группы IOMMU +PCI Devices No IOMMU Groups Available=Устройства PCI (группы IOMMU отсутствуют) +Reboot to take effect=Перезагрузите, чтобы вступили в силу +SCSI Devices=SCSI-устройства The below list doesnt not reflect the way IOMMU would naturally group devices=The below list doesn't not reflect the way IOMMU would naturally group devices This controller is bound to vfio, connected USB devices are not visible= This controller is bound to vfio, connected drives are not visible= To see natural IOMMU groups for your hardware, go to the VM Manager page and set the PCIe ACS override setting to Disabled=To see natural IOMMU groups for your hardware, go to the [VM Manager] page and set the **PCIe ACS override** setting to **Disabled** -USB Devices= -Your system has booted with the PCIe ACS Override setting enabled= +USB Devices=USB-устройства +Your system has booted with the PCIe ACS Override setting enabled=Ваша система загрузилась с включенной настройкой PCIe ACS Override. :diagnostics_1_plug: -This utility is used for troubleshooting purposes. It will collect all of the system information and configuration files, and package these files in a single ZIP file which can be saved locally. -Subsequently, this file can be included in your correspondence with Limetech or the Unraid forum. +Эта утилита используется для устранения неполадок. Она соберёт всю системную информацию, файлы конфигурации и упакует эти файлы в один ZIP-файл, который можно сохранить локально. +В дальнейшем этот файл можно будет включить в вашу переписку с Limetech или форумом Unraid. -This will help others to quickly get the inside information of your system and provide better support to your problem. The following information -and configuration files are collected: +Это поможет другим быстро получить внутреннюю информацию о вашей системе и обеспечит лучшую поддержку в решении вашей проблемы. +Собирается следующая информация и файлы конфигурации: :end :diagnostics_2_plug: + */config* -
copy all *\*.cfg files*, *go* file and the *super.dat* file. These are configuration files. +
копируются все *\*.cfg файлы*, *go* файл и *super.dat* файл. Это файлы конфигурации. + */config/shares* -
copy all *\*.cfg* files. These are user share settings files. +
копируются все *\*.cfg* файлы. Это файлы настроек общего доступа пользователей. + *Syslog file(s)* -
copy the current *syslog* file and any previous existing *syslog* files. +
копируется текущий *syslog* файл и любые предыдущие существующие *syslog* файлы. + *System* -
save output of the following commands: +
сохраняется вывод следующих команд:
lsscsi, lspci, lsusb, free, lsof, ps, ethtool & ifconfig. -
display of iommu groups. -
display of command line parameters (e.g. pcie acs override, pci stubbing, etc). -
save system variables. +
отображение групп iommu. +
отображение параметров командной строки (например, pcie acs override, pci stubbing, etc). +
сохраняются системные переменные. + *SMART reports* -
save a SMART report of each individual disk present in your system. +
сохраняется отчет SMART для каждого отдельного диска, присутствующего в вашей системе. + *Docker* -
save files *docker.log*, *libvirtd.log*, *libvirt/qemu/\*.log* and *vfio-pci*. +
сохраняются файлы *docker.log*, *libvirtd.log*, *libvirt/qemu/\*.log* и *vfio-pci*. :end :diagnostics_3_plug: -Clicking **Download** will start the collection process and then instruct your browser to save the zip file locally. +Нажмите **Скачать**, это запустит процесс сбора, а затем даст указание вашему браузеру сохранить zip-файл локально. -*No personal information such as user names, passwords, or any other file contents not specified above is included -by Unraid OS; however, your server name, IP address, and user share names* **will** *be included.* +*Никакая личная информация, такая как имена пользователей, пароли или любое другое содержимое файлов, не указанное выше, не включается в Unraid OS; тем не менее, ваше имя сервера, IP-адрес и имена общих пользователей **будут** включены*. *Note that 3rd-party plugins **may** or may not store personal information in plugin-specific configuration files and/or output to the system log.* @@ -243,11 +254,11 @@ Note: USB memory card readers are generally **not** supported because most do no :end :registration_3_plug: -Your *Trial* key includes all the functionality and device support of a *Pro* Registration key. +Ваш *Пробный* ключ включает в себя все функции и поддержку устройств, как и регистрационный ключ *Pro*. -After your *Trial* key has reached expiration, your server **still functions normally** until the next time you **Stop** the array. +После того, как срок действия вашего *пробного* ключа истечёт, ваш сервер **по-прежнему будет работать нормально** до следующей **остановки** массива. -At that point, you may either purchase a Registration key, or request a *Trial* extension. +На этом этапе вы можете либо приобрести регистрационный ключ, либо запросить продление *пробной* версии. :end :registration_4_plug: @@ -265,12 +276,12 @@ For more information, please [Contact Support](https://lime-technology.com/conta :end :registration_6_plug: -It appears that your Registration key file is corrupted or missing. The key file should be located in the -[config](/Registration/Browse?dir=/boot/config) directory on your USB Flash boot device. +Похоже, что ваш файл регистрационного ключа поврежден или отсутствует. Файл ключа должен находиться в каталоге +[config](/Registration/Browse?dir=/boot/config) на загрузочном устройстве USB Flash. -If you do not have a backup copy of your Registration key file, [Contact Support](https://lime-technology.com/contact). +Если у вас нет резервной копии файла регистрационного ключа, [Contact Support](https://lime-technology.com/contact). -If this was a *Trial* installation, you may purchase a Registration key. +Если это была *пробная установка*, вы можете приобрести регистрационный ключ. :end :registration_7_plug: @@ -300,17 +311,3 @@ is not unique (this is common with USB card readers). For more information, please [Contact Support](https://lime-technology.com/contact). :end - -; New entries - 2021-03-14 -Delete all notifications= -Downloading= -Install Language= -please configure= -Uploaded= -PCI Devices No IOMMU Groups Available=PCI Devices (No IOMMU Groups Available) - -; New entries - 2021-03-14 -Array slots= -Pool slots= -VFIO-PCI Log= -View VFIO-PCI Log= diff --git a/translations.txt b/translations.txt index 387c7dc..3f7c33f 100644 --- a/translations.txt +++ b/translations.txt @@ -1,608 +1,875 @@ -Absolute= +%s day ago=%s день назад +%s days ago=%s дней назад +%s hour ago=%s часа назад +%s hours ago=%s часов назад +%s minute ago=%s минута назад +%s minutes ago=%s минут назад +%s month ago=%s месяц назад +%s months ago=%s месяцев назад +%s second ago=%s секунду назад +%s seconds ago=%s секунд назад +%s week ago=%s неделю назад +%s weeks ago=%s недель назад +aborted= +Absolute=Абсолютный Acknowledge= -Active= -active= -Actual results= -Add Container= -Add VM= -Advanced View= -AFP Security Settings= -All= -Anonymize diagnostics may make troubleshooting more difficult=Anonymize diagnostics (may make troubleshooting more difficult) -Apply= -Apps= -Array must be Stopped to change=Array must be **Stopped** to change -Array Started= -Array Starting= -Array Stopped= -Array Stopping= -Array= -Attributes= -Auto= -Automatic= -Average speed= -Azure= -B= -Back To Top= -Basic= -Basic View= +Active=Активен +active=активен +Actual results=Фактические результаты +Add Container=Добавить контейнер +Add VM=Добавить ВМ +Advanced View=Расширенный вид +AFP Security Settings=Настройки безопасности AFP +ago=тому назад +All=Все +Anonymize diagnostics may make troubleshooting more difficult=Анонимизация диагностики (может затруднить поиск и устранение неисправностей) +Anonymous Mode=Анонимный режим +Apply=Применить +Apps=Приложения +Array must be Stopped to change=Чтобы изменить массив, необходимо его **Остановить** +Array Clearing= +Array Copying= +Array Started=Массив запущен +Array Starting=Запуск массива +Array Stopped=Массив остановлен +Array Stopping=Остановка массива +Array=Массив +Attributes=Атрибуты +Auto=Авто +Automatic=Автоматический +Average speed=Средняя скорость +Azure=Лазурная +B=Б +Back To Top=Вернуться в начало +Basic View=Базовый вид +Basic=Базовый BIOS= -Black= -Browse= -Browser error= +Black=Чёрная +Blacklisted USB Flash GUID= +bond down= +Browse=Обзор +Browser cookie support required for Unraid OS webgui=Для Unraid OS webgui требуется поддержка файлов cookie в браузере +Browser error=Ошибка браузера btrfs= -Bug Description= -Bug Report= -bytes= -Cancel= -Capabilities= -Case-sensitive names= -Center= -Change= -Check= -Clear= -Clearing= -Click for context menu= -Click= -close all notifications= -Close= -close= -Comment= -Contact Email Address= -Contact Support= -containing your key file URL= -Copy= -CPU= -Dashboard= -day= -%s day ago= -%s days ago= -Days_array=Sunday:Sunday Monday:Monday Tuesday:Tuesday Wednesday:Wednesday Thursday:Thursday Friday:Friday Saturday:Saturday Sun:Sun Mon:Mon Tue:Tue Wed:Wed Thu:Thu Fri:Fri Sat:Sat -days= -Default= -default= -Delete= -Description= +Bug Description=Описание ошибки +Bug Report=Отчёт об ошибке +bytes=байт +Cache=Кеш +Cancel=Отмена +Capabilities=Возможности +Case-sensitive names=Имена с учетом регистра +Center=Центр +Change=Изменить +Check=Проверка +Checking Wan IPs= +Clear=Очистить +Clearing=Очистка +Click for context menu=Нажмите для контекстного меню +Click=Нажмите +close all notifications=закрыть все уведомления +Close=Закрыть +close=закрыть +Comment=Комментарий +complete= +Confirm Password=Подтвердите пароль +Contact Email Address=Адрес электронной почты +Contact Support=Контакты поддержки +containing your key file URL=содержащий URL вашего ключевого файла +Copy=Копировать +Copying=Копирование +CPU=Процессор +Create Unraidnet Account=Создание учетной записи в Unraid.net +Dashboard=Приборная панель +Data-Rebuild= +day=день +Days_array=Sunday:Воскресенье Monday:Понедельник Tuesday:Вторник Wednesday:Среда Thursday:Четверг Friday:Пятница Saturday:Суббота Sun:Вск Mon:Пон Tue:Вт Wed:Ср Thu:Чт Fri:Пят Sat:Суб +days=дней +Default=По умолчанию +default=по умолчанию +Delete=Удалить +Description=Описание Device contents emulated, in standby mode spun-down=Device contents emulated, in standby mode (spun-down) Device contents emulated= Device is disabled, contents emulated= Device is in standby mode spun-down=Device is in standby mode (spun-down) Device is missing disabled, contents emulated=Device is missing (disabled), contents emulated -Device not present= -Device= -directories= -directory= -Disabled= -disabled= -Disk= -disk= -Do you want to update to the new version= +Device not present=Устройство отсутствует +Device=Устройство +directories=каталоги +directory=каталог +Disabled=Отключено +disabled=отключено +Disk=Диск +disk=диск +Disk-Clear= +DNS issue, unable to resolve mothershipunraidnet=DNS issue, unable to resolve mothership.unraid.net +Do you want to update to the new version=Вы хотите обновиться до новой версии Docker= -Done= -Download= -Duration= -Edit= -edit= +Docs= +Done=Готово +Download=Скачать +Duration=Длительность +Edit=Изменить +edit=изменить Emulated= emulated= -Enabled= -enabled= -Encrypted and unlocked= -Error code= -Error= -error= -Errors= -errors= -Expected results= -Export= -Faulty= -faulty= -Feedback= -File too large= -file= -files= -Fixed= -Flash= -flash= +Enabled=Включено +enabled=включено +Encrypted and unlocked=Зашифровано и разблокировано +Erase=Стереть +Error code=Код ошибки +Error=Ошибка +error=ошибка +Errors=Ошибки +errors=ошибки +Expected results=Ожидаемые результаты +Export=Экспорт +Faulty=Неисправен +faulty=неисправен +Feedback=Обратная связь +File too large=Файл слишком большой +file=файл +files=файлы +Fixed=Фиксированный Flash GUID= Flash Product= Flash Vendor= -FOLDER= -folder= -Force lower= -Format= -Formatting devices= -Forum= -GB= -Go to Registration page= -GPT 4K-aligned= -Gray= -Guests have no access=Guests have **no** access -Guests have read-only access=Guests have **read-only** access +Flash= +flash= +FOLDER=ПАПКА +folder=папка +Force lower=Сила ниже +Format=Форматировать +Formatting devices=Форматирование устройств(а) +Forum=Форум +GB=ГБ +Go to Registration page=Перейти на страницу регистрации +GPT 4KiB-aligned=GPT с выравниванием по 4КиБ +Gray=Серая +Guests have no access=У гостей **нет** доступа +Guests have read-only access=У гостей есть доступ **только для чтения** Heat alarm= -Help= -here= -History= -hour= -hours= -%s hour ago= -%s hours ago= -How to reproduce= +Help=Помощь +here=здесь +Hide Password=Скрыть пароль +History=История +hour=час +hours=часа +How to reproduce=Как воспроизвести hr= HVM= Identity= -Inactive= -Index of= -Info= -Install Key= -interface down= -Interface= +Inactive=Неактивен +Index of=Индекс +Info=Инфо +Install Key=Установить ключ +interface down=интерфейс вниз +Interface=Интерфейс +Invalid Username or Password=Неправильное имя пользователя или пароль IOMMU= -is available= -KB= -Kernel= -Last Modified= -Left= -less than a minute remaining= -less than a minute= -Load= -Location= -Locked missing encryption key=Locked: missing encryption key -Locked unknown error=Locked: unknown error -Locked wrong encryption key=Locked: wrong encryption key -Log= -Login= -Logout= -Main= -manual= -max installable capacity= -Maximum file upload size is 512K= -MB= -MBR 4K-aligned=MBR: 4K-aligned -MBR unaligned=MBR: unaligned -Memory= -min= -minute= -minutes= -%s minute ago= -%s minutes ago= -Model= -%s month ago= -%s months ago= -Months_array=January:January February:February March:March April:April May:May June:June July:July August:August September:September October:October November:November December:December Jan:Jan Feb:Feb Mar:Mar Apr:Apr May:May Jun:Jun Jul:Jul Aug:Aug Sep:Sep Oct:Oct Nov:Nov Dec:Dec -months= -More= -Motherboard= -Move= +is available=уже доступна +KB=КБ +Keep server details anonymous= +Kernel=Ядро +Last Modified=Последнее изменение +Left=Слева +less than a minute remaining=осталось меньше минуты +less than a minute=меньше минуты +Load=Нагрузка +Location=Расположение +Locked missing encryption key=Заблокировано: отсутствует ключ шифрования +Locked unknown error=Заблокировано: неизвестная ошибка +Locked wrong encryption key=Заблокировано: неверный ключ шифрования +Log=Журнал +Login=Авторизация +Logout=Выйти +Main=Главная +manual=руководство +max installable capacity=макс. устанавливаемый размер +Max password length is 128 characters=Максимальная длина пароля - 128 символов. +Maximum file upload size is 512K=Максимальный размер загружаемого файла - 512КБ. +MB=МБ +MBR 1MiB-aligned=MBR: с выравниванием по 1 МБ +MBR 4KiB-aligned=MBR: с выравниванием по 4 КБ +MBR unaligned=MBR: без выравнивания +Memory=Память +min=мин +minute=минута +minutes=минут +Model=Модель +Months_array=January:Январь February:Февраль March:Март April:Апрель May:Май June:Июнь July:Июль August:Август September:Сентябрь October:Октябрь November:Ноябрь December:Декабрь Jan:Янв Feb:Фев Mar:Мар Apr:Апр May:Май Jun:Июнь Jul:Июль Aug:Авг Sep:Сен Oct:Окт Nov:Ноя Dec:Дек +month=месяц +months=месяцев +More=Ещё +Motherboard=Материнская плата +Move=Перенести NA=N/A -Name= -Network= -Never= -New device, in standby mode spun-down=New device, in standby mode (spun-down) -New device= -NFS Security Settings= -No Access= -No device= -no device= -No errors reported= -No information available= -No listing Too many files=No listing: Too many files -No reply from mail server= -No= -no= +Name=Имя +Network=Сеть +Never=Никогда +New device, in standby mode spun-down=Новое устройство в режиме ожидания (остановлено) +New device=Новое устройство +NFS Security Settings=Настройки безопасности NFS +NFS= +No Access=Нет доступа +No device=Нет устройства +no device=нет устройства +No errors reported=Нет сообщений об ошибках +No information available=Нет доступной информации +No listing Too many files=Нет в списке: слишком много файлов +No reply from mail server=Нет ответа от почтового сервера +No=Нет +no=нет None= none= -Normal operation, device is active= -Normal= +Normal operation, device is active=Нормальная работа, устройство активно +Normal=Нормальный Normalized= -Not Available= -not available= -not connected= -Not encrypted= -not encrypted= -NOTE= +Not Available=Недоступен +not available=недоступен +not connected=Не подключен +Not encrypted=Не зашифрован +not encrypted=не зашифрован +NOTE=ПРИМЕЧАНИЕ Numbers_array=thirty:thirty twenty-nine:twenty-nine twenty-eight:twenty-eight twenty-seven:twenty-seven twenty-six:twenty-six twenty-five:twenty-five twenty-four:twenty-four twenty-three:twenty-three twenty-two:twenty-two twenty-one:twenty-one twenty:twenty nineteen:nineteen eighteen:eighteen seventeen:seventeen sixteen:sixteen fifteen:fifteen fourteen:fourteen thirteen:thirteen twelve:twelve eleven:eleven ten:ten nine:nine eight:eight seven:seven six:six five:five four:four three:three two:two one:one zero:zero -objects= -Off= -off-line= -OK= -Ok= -ok= -On= -Online Manual= -Online manual= +object=объект +objects=объекты +Off=Выкл. +off-line=не в сети +OK=ОК +Ok=Ок +ok=ок +On=Вкл. +Online Manual=Онлайн-руководство +Online manual=Инструкция OpenSSL= -optional= -Other Comment= -Other information= +optional=опционально +Other Comment=Дополнительный комментарий +Other information=Дополнительная информация Parity device is disabled= Parity device is missing= Parity is invalid, in standby mode spun-down=Parity is invalid, in standby mode (spun-down) Parity is invalid= -Parity is valid= -Parity= +Parity is valid=Чётность в порядке +Parity=Чётность parity= Parity-Check= +Parity-Sync= Parity-Sync Data-Rebuild=Parity-Sync / Data-Rebuild -Pause= -Paused= -paused= -PB= -Please select one file only= -Please summarize your suggestion here= -Please try again later= -Please wait= -Plugins= -Plus= -prefix_SI=K M G T P E Z Y -prefix_IEC=Ki Mi Gi Ti Pi Ei Zi Yi +Password confirmation does not match=Подтверждение пароля не совпадает +Password recovery=Восстановление пароля +Password=Пароль +Pause=Пауза +Paused=Приостановлено +paused=приостановлено +PB=ПБ +Please also ensure you have cookies enabled=Также убедитесь, что у вас включены файлы cookie. +Please enable it=Пожалуйста, включите это +Please select one file only=Пожалуйста, выберите только один файл +Please set a password for the root user account=Установите пароль для учетной записи пользователя root +Please summarize your suggestion here=Пожалуйста, здесь кратко изложите свое предложение +Please try a different browser=Пожалуйста, попробуйте другой браузер +Please try again later=Пожалуйста, повторите попытку позже +Please wait=Пожалуйста, подождите +Plugins=Плагины +Plus=Плюс +prefix_IEC=Ки Ми Ги Ти Пи Эи Зи Йи +prefix_SI=К М Г Т П Э З Й +Press ANY KEY to close this window=Нажмите ЛЮБУЮ КЛАВИШУ, чтобы закрыть это окно. Private= Pro= -Proceed= -Processor= -Product Suggestion= +Proceed=Продолжить +Processor=Процессор +Product Suggestion=Предложение продукту Public= -RAM= +Purchase Key=Купить ключ +RAM=ОЗУ Raw= -Read= -Read settings from= +Read settings from=Прочитать настройки из +Read=Чтение Read-Check= -Read-only= -Reads= -ReadWrite=Read/Write -Reboot Now= -Reboot= -Refresh= -Registration= +Read-only=Только чтение +Reads=Чтений +ReadWrite=Чтение/Запись +Reboot Now=Перезагрузить сейчас +Reboot=Перезагрузка +Refresh=Обновить +Registration=Регистрация reiserfs= -Release Notes= -Remove= +Release Notes=Примечания к выпуску +Remove=Удалить +Rename=Переименовать Renew= -Reset= -Restart= -Resume= -Right= +Reset=Сброс +Restart=Перезапустить +Resume=Возобновить +Right=Справа +root requires a password=root требует пароль RPM= -Running= -running= -safe mode= -sec= -second= -seconds= -%s second ago= -%s seconds ago= +Running=Выполняется +running=выполняется +safe mode=безопасный режим +sec=сек +second=секунда +seconds=секунд Secure= -Security= -Security Settings= -select= -Self-Test= -Server= -Settings= -Share= -Share name= -Shares List= -Shares= -Shutdown= -Size= -SMB Security Settings= -sn=s/n -Sorry, an error occurred= +Security Settings=Настройки безопасности +Security=Безопасность +select=выбрать +Self-Test=Самодиагностика +Server=Сервер +Set Password=Установить пароль +Settings=Настройки +Share name=Имя общего ресурса +Share=Общий ресурс +Shares List=Список общих ресурсов +Shares=Общие ресурсы +Show Password=Показать пароль +Shutdown=Выключение +Sign In before your Unraidnet SSL certificate expires=Sign In before your Unraid.net SSL certificate expires +Size=Размер +SMB Security Settings=Настройки безопасности SMB +SMB= +sn=с/н +Sorry, an error occurred=К сожалению, произошла ошибка +Sorry, this feature is not supported by MSIEEdge=К сожалению, эта функция не поддерживается в MSIE/Edge Standby= standby= -Start= -Started= -started= -Status= -status= -Stop= -Stopped= -stopped= -Streams= -Submission of this bug report will automatically send your system diagnostics to Lime Technology= -Submit= -System Information= -System is going down= -System is offline= -System is powered off= -System is rebooting= -System Log= -System notifications are= -System running in= -System= -TB= -Temperature= -Template Repositories= -Terminal= -Test result= -Thank You= -The error is= -to change notification settings= -to downgrade Unraid OS= -to upgrade Unraid OS= -today= -Too many files= -Tools= -Total= -total= -Type your question or comment to Lime Technology here= -Type= -Unable to generate system diagnostics= -Unassigned= -unassigned= -Unknown= -unknown= +Start=Запустить +Started=Запущен +started=запущен +Status=Статус +status=статус +Stop=Остановить +Stopped=Остановлен +stopped=остановлен +Streams=Потоки +Subject=Тема +Submission of this bug report will automatically send your system diagnostics to Lime Technology=Отправка этого отчета об ошибке автоматически отправит диагностику вашей системы в Lime Technology. +Submit=Отправить +Successfully logged out=Успешный выход из системы +System Information=Информация о системе +System is going down=Система завершает работу +System is offline=Система не в сети +System is powered off=Система выключена +System is rebooting=Система перезагружается +System Log=Системный журнал +System notifications are=Системные уведомления есть +System running in=Система работает в +System=Система +TB=ТБ +Temperature=Температура +Template Repositories=Репозитории шаблонов +Terminal=Терминал +Test result=Результат тестов +Thank you for choosing Unraid OS=Спасибо, что выбрали Unraid OS +Thank You=Спасибо +The error is=Ошибка +The Unraid OS webgui requires JavaScript=Для веб-интерфейса Unraid OS требуется JavaScript. +There is a physical problem accessing your USB Flash boot device= +This will start your free 30-day Trial=Это запустит бесплатную 30-дневную пробную версию. +to change notification settings=изменить настройки уведомлений +to downgrade Unraid OS=понижения версии Unraid OS +to upgrade Unraid OS=обновить ОС Unraid +today=сегодня +Too many files=Слишком много файлов +Too many invalid login attempts=Слишком много неудачных попыток входа в систему +Tools=Инструменты +Total=Всего +total=всего +Trial=Пробная +Type your question or comment to Lime Technology here=Введите свой вопрос или комментарий к Lime Technology здесь +Type=Тип +Unable to generate system diagnostics=Невозможно создать диагностику системы +Unable to set password=Невозможно установить пароль +Unassigned=Не назначен +unassigned=не назначен +Unknown=Неизвестно +unknown=неизвестно Unraid OS= -Update Container= -Update Now= -Update VM= -Update= -update= -Updated= -Upload error= -Upload= -Uptime= -up-to-date= -User Access= -Users= -Utilization= -Version= -View Release Notes= -View= -VMs= +Unraidnet re-authentication required=Требуется повторная аутентификация Unraid.net +Unsupported Feature=Не поддерживаемая функция +Update Container=Обновить контейнер +Update Now=Обновить сейчас +Update VM=Обновить ВМ +Update=Обновить +update=обновить +Updated=Обновлено +Upgrade Key=Обновление ключа +Upload error=Ошибка загрузки +Upload=Загрузить +Uptime=Время работы +up-to-date=актуальный +User Access=Доступ пользователя +Username=Имя пользователя +Username not changeable=Имя пользователя не может быть изменено +Users=Пользователи +Utilization=Используется +Version=Версия +View Release Notes=Просмотреть примечания к выпуску +View=Просмотр +VMs=Виртуальные машины VPN= -Warning= -Website= -%s week ago= -%s weeks ago= -White= -Wiki= -Write= -Write settings to= +Warning=Предупреждение +Website=Веб-сайт +White=Белая +Wiki=Вики +Write settings to=Записать настройки в +Write=Запись Wrong= wrong= xfs= -Yes, I want to do this= -Yes= -yes= -Yes hidden=Yes (hidden) -Yes Time Machine=Yes (Time Machine) -YesTime Machine hidden=Yes/Time Machine (hidden) -YesTime Machine=Yes/Time Machine -yesterday= -You must reboot for changes to take effect= -Your browser does not support HTML5 file uploads= +year=год +years=лет +Yes hidden=Да (скрыто) +Yes Time Machine=Да (Time Machine) +Yes, I want to do this=Да, я хочу это сделать +Yes=Да +yes=да +yesterday=вчера +YesTime Machine hidden=Да/Time Machine (скрыто) +YesTime Machine=Да/Time Machine +You must reboot for changes to take effect=Вы должны перезагрузить, чтобы изменения вступили в силу +Your browser does not support HTML5 file uploads=Ваш браузер не поддерживает загрузку файлов HTML5 +Your browser has JavaScript disabled=В вашем браузере отключён JavaScript ; Dynamix.system.button plugin -Array busy= -Buttons= +Array busy=Массив занят +Buttons=Кнопки Parity operation or mover is running= -preparing for reboot= -preparing for shutdown= -Sleep= -Start Array= -starting the array= -Stop Array= -stopping the array= -System in sleep mode= -This will put the system to sleep= -This will reboot the system= -This will shutdown the system= -This will start the array= -This will stop the array= +preparing for reboot=подготовка к перезагрузке +preparing for shutdown=подготовка к отключению +Sleep=Спящий режим +Start Array=Запустить массив +starting the array=запуск массива +Stop Array=Остановить массив +stopping the array=Остановка массива +System in sleep mode=Система в спящем режиме +This will put the system to sleep=Это переведет систему в спящий режим +This will reboot the system=Это перезагрузит систему +This will shutdown the system=Это отключит систему +This will start the array=Это запустит массив +This will stop the array=Это остановит массив -; New entries - 2021-03-14 -Cache= -GPT 4KiB-aligned= -MBR 1MiB-aligned=MBR: 1MiB-aligned -MBR 4KiB-aligned=MBR: 4KiB-aligned -NFS= -Please try a different browser= -SMB= -Sorry, this feature is not supported by MSIEEdge=Sorry, this feature is not supported by MSIE/Edge -Unsupported Feature= -Get Started= -Sign In= -Sign Up= -Sign Out= -Fix Error= -Close Launchpad and continue to webGUI= -Learn more= -Pop-up= -Back to %s= -Close %s= +; UNRAID.NET / My Servers +%s is signed in to your Unraidnet account=%s is signed in to your Unraid.net account +%s Key Created= +%s Key Extended= +%s Key Install Error= +%s Key Recovered= +%s Key Replaced= +%s was not signed in to your Unraidnet account=%s не вошёл в вашу учетную запись Unraid.net +%s was not signed out of your Unraidnet account=%s не вышел из вашей учетной записи Unraid.net +%s was signed out of your Unraidnet account=%s вышел из вашей учетной записи Unraid.net +8 or more characters=8 или более символов +a digest of recent blog posts, community videos, popular forum threads, product announcements, and more=дайджест последних сообщений в блогах, видеоролики сообщества, популярные темы форума, анонсы продуктов и многое другое +A USB Flash device may also be blacklisted if we discover the serial number is not unique – this is common with USB card readers= +Access unavailable=Доступ недоступен +Acknowledge Replacement Conditions=Подтвердите условия замены +After resetting your password come back to the Registration Wizard pop-up window to Sign In and complete your servers registration=После сброса пароля вернитесь во всплывающее окно мастера регистрации, чтобы войти в систему и завершить регистрацию вашего сервера. +After your Trial has reached expiration your server still functions normally until the next time you Stop the array or reboot your server=По истечении срока действия пробной версии ваш сервер по-прежнему будет нормально функционировать до следующего раза, когда вы остановите массив или не перезагрузите сервер. +Already have an account=Уже есть аккаунт +Alternately you may purchase a license key for this USB flash device= +Alternately, you may request a Trial extension=В качестве альтернативы вы можете запросить продление пробной версии +And not just for one server but all the servers in your Unraid fleet=И не только для одного сервера, но и для всех серверов в вашем парке Unraid +At that point you may either purchase a license key or request a Trial extension=На этом этапе вы можете либо приобрести лицензионный ключ, либо запросить продление пробной версии. +Auto closing in %s=Автоматическое закрытие через %s +Auto redirecting in %s=Автоматическое перенаправление через %s +Avatar=Аватар +Back in a flash ⚡️= +Back to %s=Вернуться к %s +Back to Registration Home=Вернуться на главную страницу регистрации +Back to Sign In=Вернуться к входу +Best of all all SSL certificates are verified by Lets Encrypt so no browser security warnings=Best of all all SSL certificates are verified by Let's Encrypt so no browser security warnings +beta=бета +BLACKLISTED=ЧЁРНЫЙ СПИСОК +Browser will self destruct in %s=Браузер самоуничтожится через %s +bye bye 👋=до свидания 👋 +Cannot access your USB Flash boot device= +Cannot validate Unraid Trial key=Невозможно проверить ключ Unraid пробной версии +Click a button and your flash is automatically backed up to Unraidnet enabling easy recovery in the event of a device failure=Click a button and your flash is automatically backed up to Unraid.net enabling easy recovery in the event of a device failure +Close %s=Закрыть %s +Close Details=Закрыть детали +Close dropdown=Закрыть раскрывающийся список +Close Launchpad and continue to webGUI=Закройте Launchpad и перейдите в веб-интерфейс. +Closing this pop-up window while actions are being preformed may lead to unintended errors=Закрытие этого всплывающего окна во время выполнения действий может привести к непреднамеренным ошибкам. +comments=комментарии +Communication with %s has timed out=Время ожидания связи с %s истекло +Confirm closure then continue to webGUI=Подтвердите закрытие, затем перейдите в веб-интерфейс +Confirm Password=Подтверждение пароля +Confirm=Подтвердить +Connected to Mothership= +Continue to Unraid=Продолжить в Unraid +Continue Trial=Продолжить испытание +Copied key url= +Copy Key URL= +Create My Account=Создать мой аккаунт +Current server=Текущий сервер +Didnt get code=Не получили код? +Display Name or Email Address=Отображаемое имя или адрес электронной почты +Display Name=Отображаемое имя +Displaying last known server data=Отображение последних известных данных сервера +Do not have an account=Нет аккаунта +Download any registration key linked to your account=Загрузите любой регистрационный ключ, связанный с вашей учетной записью +Email Address=Адрес электронной почты +Expand your servers capabilities=Расширьте возможности вашего сервера +Extend Trial=Продлить пробный период +Extending Trial=Продление пробного периода +Failed to connect to Unraid API=Не удалось подключиться к Unraid API +Fix Error=Исправить ошибку +Forgot Password=Забыл пароль +Forgot what Unraidnet account you used=Забыли, какую учетную запись Unraid.net вы использовали +Form not valid=Форма недействительна +Formatting devices=Форматирование устройств(-а) +Get quick real-time info on the status of your servers such as storage, container, and VM usage=Получайте в режиме реального времени информацию о состоянии ваших серверов, например о работе хранилищ, контейнеров и виртуальных машин. +Get started by signing in to Unraidnet=Начните с входа на Unraid.net +Get Started=Начать +Go Back=Вернуться назад +GUID Error=Ошибка GUID +GUID= +Have a USB flash device that already has an account associated with it=У вас есть USB-флешка, с которой уже связана учетная запись +Hi %s=Приветствую, %s! +I acknowledge that replacing a license key results in permanently blacklisting the previous USB Flash GUID= +I agree to the=Я согласен и прочитал +If this was a Trial installation, you may purchase a license key=Если это была пробная установка, вы можете приобрести лицензионный ключ. +If you do not have a backup copy of your license key file you may attempt to recover your key=Если у вас нет резервной копии файла лицензионного ключа, вы можете попытаться восстановить свой ключ. +If you fill this field out then your email will not be sent=Если вы заполните это поле, то ваш адрес электронной почты не будет отправлен +If you want to replace one of your license keys with a new key bound to this USB Flash device please first remove all other key files first= +Installed %s Key=Установлен %s ключ +Installing %s Key=Установка %s ключа +Invalid installation=Неверная установка +IP= +It appears that your license key file is corrupted or missing=Похоже, ваш лицензионный ключевой файл повреждён или отсутствует. +It is not possible to use a Trial key with an existing Unraid OS installation= +Just give us the details about what happened and well do our best to get you up and running again=Просто расскажите нам подробности о том, что произошло, и мы сделаем всё возможное, чтобы это снова заработало LAN IP %s= -Purchase Key= -Upgrade Key= -Recover Key= -Replace Key= -Extend Trial= -%s Avatar= -Confirm closure then continue to webGUI= -Close dropdown= -Open dropdown= -Please confirm closure You have an open popup=Please confirm closure. You have an open pop-up. -Trial has expired, see options below= -Opens %s in new tab= +Learn more=Узнать больше +Lets unleash your hardware=Давайте раскроем ваше оборудование +Loading My Servers data=Загрузка данных моих серверов +Local access=Локальный доступ +Message=Сообщение +Missing key file=Отсутствует файл ключа +Multiple License Keys Present=Наличие нескольких лицензионных ключей My Servers Dashboard= -Unraid Forums= -Settings > Management Access • Unraidnet=Settings > Management Access • Unraid.net -Trial key expires at %s= -Trial expires in %s= -Trial key expired at %s= -Trial expired %s= -Server up since %s= -Uptime %s= -My Servers= -beta= -Unraid API Error= -Failed to connect to Unraid API= -My Servers Error= -Please wait a moment and reload the page= -Close Details= -Loading My Servers data= -Displaying last known server data= -Connected to Mothership= -Not Connected to Mothership= -Current server= -Local access= -Server Offline= -Remote access= -Access unavailable= -Opens new HTTPS window to %s= -Sign In to resolve= -Sign In to Purchase Key= -Purchase Key or Extend Key= +My Servers Error=Ошибки моих серверов +My Servers=Мои серверы +Never self-managehost your flash backups again=Never self-manage/host your flash backups again +No Flash= No Keyfile= -Thanks for supporting Unraid=Thanks for supporting Unraid! -Lets unleash your hardware=Let's unleash your hardware! -You are all set 👍= -Sign in or sign up to get started= -Trial= -Thank you for choosing Unraid OS=Thank you for choosing Unraid OS! -Your Trial key includes all the functionality and device support of a Pro key= -After your Trial has reached expiration, your server still functions normally until the next time you Stop the array or reboot your server=After your *Trial* has reached expiration, your server **still functions normally** until the next time you Stop the array or reboot your server -At that point you may either purchase a license key or request a Trial extension=At that point you may either purchase a license key or request a *Trial* extension -You have %s remaining on your Trial key=You have **%s** remaining on your Trial key -Trial Expired= -Your Trial has expired= -To continue using Unraid OS you may purchase a license key= -You have used all your Trial extensions=You have used all your Trial extensions. -Alternately, you may request a Trial extension= -GUID Error= -Registration key GUID mismatch=Registration key / GUID mismatch -The license key file does not correspond to the USB Flash boot device Please copy the correct key file to the bootconfig directory on your USB Flash boot device=The license key file does not correspond to the USB Flash boot device. Please copy the correct key file to the **/boot/config** directory on your USB Flash boot device -or click Replace Key to transfer your registration to this new flash device= -Missing key file= -It appears that your license key file is corrupted or missing The key file should be located in the bootconfig directory on your USB Flash boot device If you do not have a backup copy of your license key file you may attempt to recover your key If this was a Trial installation, you may purchase a license key=It appears that your license key file is corrupted or missing. The key file should be located in the **/boot/config** directory on your USB Flash boot device. If you do not have a backup copy of your license key file you may attempt to recover your key. If this was a Trial installation, you may purchase a license key. -Invalid installation= -It is not possible to use a Trial key with an existing Unraid OS installation You may purchase a license key corresponding to this USB Flash device to continue using this installation=It is not possible to use a Trial key with an existing Unraid OS installation. You may purchase a license key corresponding to this USB Flash device to continue using this installation. No USB flash configuration data= +Not Connected to Mothership= +Open dropdown=Открывает раскрывающийся список +Opens %s in new tab=Открывает %s в новой вкладке +Opens new HTTPS window to %s=Открывает новое HTTPS окно для %s +Page Not Allowed=Страница не разрешена +Page Not Found=Страница не найдена +Paste or Enter code=Вставьте или введите код +Please check Settings > Network=Пожалуйста, проверьте Настройки > Сеть +Please confirm closure=Пожалуйста, подтвердите закрытие +Please copy the correct key file to the config directory on your USB Flash boot device or choose Purchase Key or Replace Key=Please copy the correct key file to the */config* directory on your USB Flash boot device or choose Purchase Key or Replace Key +Please copy the correct key file to the config directory on your USB Flash boot device or choose Purchase Key=Please copy the correct key file to the */config* directory on your USB Flash boot device or choose Purchase Key +Please copy the Key URL before closing this window=Скопируйте ключевой URL перед закрытием этого окна +Please keep this window open=Пожалуйста, оставьте это окно открытым +Please refresh the page to ensure you load your latest configuration=Обновите страницу, чтобы загрузить последнюю конфигурацию. +Please remove all key files except the one you want to replace from the config directory on your USB Flash boot device=Please remove all key files except the one you want to replace from the */config* directory on your USB Flash boot device +Please sign in with your Unraidnet forum account=Пожалуйста, войдите в свою учетную запись на форуме Unraid.net +Please try a different USB Flash device= +Please wait a moment and reload the page=Подождите немного и перезагрузите страницу +Pop-up=всплывающее окно +Post your diagnostics in the forum for help=Разместите свою диагностику на форуме для получения помощи +Product=Продукт +Real-time Monitoring=Мониторинг в реальном времени +Recover Key=Восстановить ключ +Registration key management=Управление ключами регистрации +Registration keyGUID mismatch=Регистрационный ключ / несоответствие GUID +Registration Wizard=Мастер регистрации +remaining=осталось +Remote access=Удалённый доступ +Replace Key=Заменить ключ +Reset Password Now=Сбросить пароль сейчас +Searching=Поиск +Secure remote access=Безопасный удаленный доступ +See also here=Смотрите также здесь +Server Offline=Сервер в автономном режиме +Server up since %s=Сервер работает с %s +Settings > Management Access • Unraidnet=Settings > Management Access • Unraid.net +Shut Down= +Sign in or sign up to get started=Войдите или зарегистрируйтесь, чтобы начать +Sign In to Purchase Key=Войти, чтобы купить ключ +Sign In to resolve=Войти, чтобы решить +Sign In=Войти +Sign me up for the monthly Unraid newsletter=Подписаться на ежемесячную рассылку новостей Unraid +Sign Out=Выйти +Sign Out of Unraidnet=Sign Out of Unraid.net +Sign Up for Unraidnet=Зарегистрируйтесь на Unraid.net +Sign Up=Регистрация +Signing in %s to Unraidnet account=Вход %s в учетную запись Unraid.net +Signing out %s from Unraidnet account=Выход %s из учетной записи Unraid.net +Stale Server= +Stale= +Still working our magic= +Submitting=Отправка +Success=Успешно! +Switch Language=Переключить язык +Terms of Use=Условия использования +Thank you for contacting Unraid=Спасибо, что связались с Unraid +Thanks for supporting Unraid=Спасибо за поддержку Unraid! +The key file should be located in the config directory on your USB Flash boot device=The key file should be located in the */config* directory on your USB Flash boot device +The license key file does not correspond to the USB Flash boot device= +There are multiple license key files present on your USB flash device and none of them correspond to the USB Flash boot device= There is a problem with your USB Flash device= -No Flash= -Cannot access your USB Flash boot device= -There is a physical problem accessing your USB Flash boot device= -Multiple License Keys Present= -There are multiple license key files present on your USB flash device and none of them correspond to the USB Flash boot device Please remove all key files, except the one you want to replace, from the bootconfig directory on your USB Flash boot device Alternately you may purchase a license key for this USB flash device If you want to replace one of your license keys with a new key bound to this USB Flash device, please first remove all other key files first=There are multiple license key files present on your USB flash device and none of them correspond to the USB Flash boot device. Please remove all key files, except the one you want to replace, from the **/boot/config** directory on your USB Flash boot device. Alternately you may purchase a license key for this USB flash device. If you want to replace one of your license keys with a new key bound to this USB Flash device, please first remove all other key files first. -BLACKLISTED= -Blacklisted USB Flash GUID= -This USB Flash boot device has been blacklisted This can occur as a result of transferring your license key to a replacement USB Flash device, and you are currently booted from your old USB Flash device A USB Flash device may also be blacklisted if we discover the serial number is not unique – this is common with USB card readers=This USB Flash boot device has been blacklisted. This can occur as a result of transferring your license key to a replacement USB Flash device, and you are currently booted from your old USB Flash device. A USB Flash device may also be blacklisted if we discover the serial number is not unique – this is common with USB card readers +This can occur as a result of transferring your license key to a replacement USB Flash device, and you are currently booted from your old USB Flash device= +This field is required=Это поле обязательно к заполнению +This setup will help you get your server up and running=Эта установка поможет вам настроить и запустить ваш сервер. +This USB Flash boot device has been blacklisted= +This USB Flash device has an invalid GUID= +To continue using Unraid OS you may purchase a license key=Чтобы продолжить использование Unraid OS, вы можете приобрести лицензионный ключ. +To manually install the key paste the key file url into the Key file URL field on the webGUI Registration page and then click Install Key= +To Registration Wizard Home=На главную страницу мастера регистрации +To support more storage devices as your server grows click Upgrade Key= +Toggle Password Visibility=Переключить видимость пароля +Toggle server info visibility=Переключить видимость информации о сервере +Trial expired %s=Срок действия пробной версии истёк %s +Trial Expired=Срок действия пробной версии истёк +Trial expires in %s=Срок действия пробной версии истекает через %s +Trial Extension Failed=Не удалось продлить пробную версию +Trial has expired see options below=Срок действия пробной версии истёк, смотрите варианты ниже +Trial key expired at %s=Срок действия пробного ключа истёк %s +Trial key expires at %s=Срок действия пробного ключа истекает %s +Trial Requires Internet Connection=Пробная версия требует подключения к Интернету +Troubleshoot=Устранение неполадок +Unable to copy=Невозможно скопировать +unavailable no parity-check entries logged=unavailable (no parity-check entries logged) +Unraid API Error=Ошибка Unraid API +Unraid Forums=Форумы Unraid +Unraidnet account password=Пароль учетной записи Unraid.net +Unraidnet Sign In to Recover Key=Войдите в Unraid.net, чтобы восстановить ключ +Unraidnet Sign In to Replace Key=Войдите в Unraid.net, чтобы заменить ключ +Unraidnet Sign In=Вход в Unraid.net +Unraidnet Sign Out=Выход из Unraid.net +Upgrade keys to higher editions= +Uptime %s=Время безотказной работы %s +USB Flash Backup= USB Flash device error= -This USB Flash device has an invalid GUID Please try a different USB Flash device=This USB Flash device has an invalid GUID. Please try a different USB Flash device USB Flash has no serial number= -Trial Requires Internet Connection= -Cannot validate Unraid Trial key= -Your Trial key requires an internet connection Please check Settings > Network=Your Trial key requires an internet connection. Please check Settings > Network -Stale= -Stale Server= -Please refresh the page to ensure you load your latest configuration= -Registration Wizard= -To Registration Wizard Home= -Continue Trial= -Continue to Unraid= -Toggle server info visibility= -You can safely close this window= -Automatically closing in %s= -bye bye 👋= -Browser will self destruct in %s= -Closing this pop-up window while actions are being preformed may lead to unintended errors= -Go Back= -Shut Down= -Already have an account Sign In=Already have an account? Sign In -Dont have an account Sign Up=Don't have an account? Sign Up -Product= -GUID= -IP= -Get started by signing in to Unraidnet=Get started by signing in to Unraid.net -To support more storage devices as your server grows, click Upgrade Key= -Display Name= -Email Address= -Display Name or Email Address= Use your Unraidnet credentials, not your local server credentials=Use your Unraid.net credentials, not your local server credentials -If you fill this field out then your email will not be sent= -This field is required= -Submitting= -Form not valid= -Confirm= -Create My Account= -Subject= -Password= -Toggle Password Visibility= -Message= -Confirm Password= -8 or more characters= -comments= -Sign me up for the monthly Unraid newsletter a digest of recent blog posts, community videos, popular forum threads, product announcements, and more=Sign me up for the monthly Unraid newsletter: a digest of recent blog posts, community videos, popular forum threads, product announcements, and more -I agree to the= -Terms of Use= -Extending Trial= -Trial Extension Failed= -Forgot Password= -After resetting your password come back to the Registration Wizard pop-up window to Sign In and complete your servers registration=After resetting your password come back to the Registration Wizard pop-up window to Sign In and complete your server's registration -Reset Password Now= -Back to Sign In= -Unraidnet Sign In=Unraid.net Sign In -Unraidnet Sign In to Recover Key=Unraid.net Sign In to Recover Key -Unraidnet Sign In to Replace Key=Unraid.net Sign In to Replace Key -Please sign in with the same email with which you purchased your license= -Acknowledge Replacement Conditions= -I acknowledge that replacing a license key results in permanently blacklisting the previous USB Flash GUID= -Unraidnet account password=Unraid.net account password -Sign Up for Unraidnet=Sign Up for Unraid.net -This setup will help you get your server up and running= -Unraidnet Sign Out=Unraid.net Sign Out -This will remove your server from displaying in My Servers= -Hi %s=Hi %s! -Success=Success! -Your trial will expire in 15 days= -Your trial will expire in 30 days= -%s was not signed in to your Unraidnet account=%s was not signed in to your Unraid.net account -%s is signed in to your Unraidnet account=%s is signed in to your Unraid.net account -Signing in %s to Unraidnet account=Signing in %s to Unraid.net account -%s was not signed out to your Unraidnet account=%s was not signed out to your Unraid.net account -%s was signed out to your Unraidnet account=%s was signed out to your Unraid.net account -Signing out %s from Unraidnet account=Signing out %s from Unraid.net account -%s Key Extended= -%s Key Recovered= -%s Key Replaced= -%s Key Created= -Installing %s Key= -%s Key Install Error= -Installed %s Key= -Communication with %s has timed out= -Please keep this window open= -Were working our magic=We're working our magic -Auto closing in %s= -Auto redirecting in %s= -Back to Registration Home= -Back in a flash ⚡️= -Troubleshoot= -Thank you for contacting Unraid= -Forgot what Unraidnet account you used Have a USB flash device that already has an account associated with it Just give us the details about what happened and well do our best to get you up and running again=Forgot what Unraid.net account you used? Have a USB flash device that already has an account associated with it? Just give us the details about what happened and we'll do our best to get you up and running again. -We have received your e-mail and will respond in the order it was received While we strive to respond to all requests as quickly as possible, please allow for up to 3 business days for a response=We have received your e-mail and will respond in the order it was received. While we strive to respond to all requests as quickly as possible, please allow for up to 3 business days for a response. -Your USB Flash GUID and other relevant server data will also be sent= -Verify Email= -verification code= -Paste or Enter code= -Didnt get code=Didn't get code? -What is Unraidnet=What is Unraid.net? -Expand your servers capabilities=Expand your server's capabilities +verification code=код подтверждения +Verify Email=Подтвердить электронную почту +We have received your e-mail and will respond in the order it was received=Мы получили ваше письмо и ответим в том порядке, в котором оно было получено. +What is Unraidnet=Что такое Unraid.net? +Whether you need to add a share container or virtual machine do it all from the webGui from anytime and anywhere using HTTPS= +While we strive to respond to all requests as quickly as possible please allow for up to 3 business days for a response=Хотя мы стремимся отвечать на все запросы как можно быстрее, ответ может занять до 3 рабочих дней. With an Unraidnet account you can start using My Servers beta which gives you access to the following features=With an Unraid.net account you can start using My Servers (beta) which gives you access to the following features: -Secure remote access= -Whether you need to add a share, container, or virtual machine, do it all from the webGui from anytime and anywhere using HTTPS Best of all, all SSL certificates are verified by Lets Encrypt, so no browser security warnings=Whether you need to add a share, container, or virtual machine, do it all from the webGui from anytime and anywhere using HTTPS. Best of all, all SSL certificates are verified by Let's Encrypt, so no browser security warnings -Real-time Monitoring= -Get quick real-time info on the status of your servers such as storage, container, and VM usage And not just for one server, but all the servers in your Unraid fleet=Get quick real-time info on the status of your servers such as storage, container, and VM usage. And not just for one server, but all the servers in your Unraid fleet! -USB Flash Backup= -Click a button and your flash is automatically backed up to Unraidnet, enabling easy recovery in the event of a device failure Never self-managehost your flash backups again=Click a button and your flash is automatically backed up to Unraid.net, enabling easy recovery in the event of a device failure. Never self-manage/host your flash backups again! -Registration key management= -Download any registration key linked to your account Upgrade keys to higher editions=Download any registration key linked to your account. Upgrade keys to higher editions. -Page Not Found= -Page Not Allowed= -year= -years= -month= -ago= +You are all set 👍=Всё готово 👍 +You can safely close this window=Вы можете спокойно закрыть это окно +You have %s remaining on your Trial key= +You have an open pop-up=У вас есть открытое всплывающее окно +You have used all your Trial extensions= +You may purchase a license key corresponding to this USB Flash device to continue using this installation= +Your flash drive is corrupted or offline= +Your Trial has expired=Срок действия вашей пробной версии истек +Your Trial key includes all the functionality and device support of a Pro key=Ваш пробный ключ включает в себя все функции и поддержку устройств ключа Pro +Your Trial key requires an internet connection=Ваш пробный ключ требует подключения к Интернету +Your trial will expire in 15 days=Срок действия вашей пробной версии истекает через 15 дней +Your trial will expire in 30 days=Срок действия вашей пробной версии истекает через 30 дней +Your Unraid registration key is ineligible for replacement as it has been replaced within the last 12 months=Ваш регистрационный ключ Unraid не подлежит замене, так как он был заменён в течение последних 12 месяцев. +Your USB Flash GUID and other relevant server data will also be sent=Также будет отправлен GUID вашего USB-флешки и другие соответствующие данные сервера. + +; My Servers - 2022-03-13 +Remark your WAN IPv4 is %s=Remark: your WAN IPv4 is **%s** +Remark Unraids WAN IPv4 %1s does not match your clients WAN IPv4 %2s=Remark: Unraid's WAN IPv4 **%1s** does not match your client's WAN IPv4 **%2s** +This may indicate a complex network that will not work with this Remote Access solution=Это может указывать на сложную сеть, которая не будет работать с этим решением удаленного доступа. +Ignore this message if you are currently connected via Remote Access or VPN=Игнорируйте это сообщение, если вы в настоящее время подключены через удаленный доступ или VPN. + +Automated flash backups will be disabled until you sign in again= +Click to copy LAN IP %s= +DNS issue, unable to resolve wanip4unraidnet=DNS issue, unable to resolve wanip4.unraid.net +Download latest backup from My Servers Dashboard= +Have the code now Go Back=Have the code now? Go Back +LAN IP Copied= +Remote access will be disabled= +Resend Code= +Resend Email Verification Code= +We have sent a verifcation email to %s= +You will no longer have access to this server using this url=You will no longer have access to this server using this url + +; Dynamix File Manager - 2022-05-20 +%s year ago=%s год назад +%s years ago=%s лет назад +Action=Действие +Calculate Occupied Space=Вычисление занимаемого пространства +Calculate=Вычислить +change owner=изменить владельца +Change Owner=Изменить владельца +change permission=изменить разрешение +Change Permission=Изменить разрешение +Common= +Completed= +Compress=Сжать +Copy Device=Копировать устройство +Copy File=Копировать файл +Copy Folder=Копировать папку +Copy Share= +copy to=копировать в +Create=Создать +Create Folder=Создать папку +Creating=Создание +Current file name=Текущее имя файла +Current folder name=Текущее имя папки +Delete Device= +Delete File=Удаление файла +Delete Folder=Удаление папки +Delete Share=Удалить общий ресурс +DEVICE=УСТРОЙСТВО +Device name=Имя устройства +Download File= +Enter a valid target= +Expand= +File Manager=Файловый менеджер +File name=Имя файла +file type=тип файла +Folder name=Имя папки +folders=папки +Group=Группа +in %s folder and %s file= +in %s folder and %s files= +in %s folders and %s file= +in %s folders and %s files= +Invalid path= +Invalid source= +Invalid target= +Last modified=Последнее изменение +Move Device= +Move File= +Move Folder= +Move Share= +move to=перенести в +Moving= +New file name=Новое имя файла +New folder name=Новое имя папки +New owner=Новый владелец +New permission=Новое разрешение +No results found=результаты не найдены +Not allowed to mix disk and user shares= +Objects to change=Объекты, которые необходимо изменить +Objects to copy=Объекты, которые необходимо скопировать +Objects to delete=Объекты, которые необходимо удалить +Objects to move=Объекты, которые необходимо переместить +Other=Прочее +Overwrite existing file=Перезаписать существующий файл +Overwrite existing files=Перезаписать существующие файлы +Owner=Владелец +Page will be reloaded=Страница будет перезагружена +Parent Directory=Родительский каталог +Permission=Разрешение +Removing=Удаление +Rename File=Переименовать файл +Rename Folder=Переименовать папку +rename to=переименовать в +Renaming=Переименование +Save=Сохранить +Search=Поиск +Search string=Строка поиска +Share name= +SHARE= +Source device= +Source file= +Source folder= +Source share= +Source=Источник +Target device= +Target file= +Target folder= +Target share= +Target=Цель +This changes the owner of the source recursively=Это рекурсивно изменяет владельца источника +This changes the permission of the source recursively=Это рекурсивно изменяет разрешения источника +This copies all the selected sources=Это скопирует все выбранные источники +This copies the device and all its content to another device=Это скопирует устройство и всё его содержимое на другое устройство +This copies the folder and all its content to another folder=Это скопирует папку и всё её содержимое в другую папку +This copies the share and all its content to another share=Это копирует общий ресурс и всё его содержимое в другой общий ресурс +This copies the selected file=Это скопирует выбранный файл +This creates a folder at the current level=Это создаст папку на текущем уровне +This deletes all selected sources=Это удалит все выбранные источники +This deletes the device and all its content=Это удалит устройство и всё его содержимое +This deletes the folder and all its content=Это удалит папку и всё её содержимое +This deletes the share and all its content=Это удалит общий ресурс и всё его содержимое +This deletes the selected file=Это удалит выбранный файл +This moves all the selected sources=Это переместит все выбранные источники +This moves the device and all its content to another device=Это переместит устройство и всё его содержимое на другое устройство +This moves the folder and all its content to another folder=Это переместит папку и всё её содержимое в другую папку +This moves the share and all its content to another share=Это переместит общий ресурс и всё его содержимое в другой общий ресурс +This moves the selected file=Это переместит выбранный файл +This renames the folder to the new name=Это переименует папку в новое имя +This renames the selected file=Это переименует выбранный файл +This renames the selected source=Это переименует выбранный источник +Toggle TimeAge display=Переключить отображение времени/возраста +Total occupied space=Общее занимаемое пространство +Updating=Обновление +year=год +years=года + +; My Servers refactor - 2022-05-20 -; New entries - 2021-03-14 -%s was not signed out of your Unraidnet account=%s was not signed out of your Unraid.net account -%s was signed out of your Unraidnet account=%s was signed out of your Unraid.net account -remaining= +A Trial key provides all the functionality of a Pro Registration key= +All you need is an active internet connection, an Unraidnet account, and the My Servers plugin=All you need is an active internet connection, an Unraid.net account, and the My Servers plugin +All you need is an active internet connection, an Unraidnet account, and the My Servers plugin=All you need is an active internet connection, an Unraid.net account, and the My Servers plugin +Checkout the My Servers docs= +Close My Servers details and continue to webGUI= +Confirm My Servers plugin removal=Подтвердите удаление плагина «Мои серверы»‎ +Connect to My Servers by signing in to Unraid.net= +Connect your Unraidnet account to get started=Подключите свою учетную запись Unraid.net, чтобы начать +Continue using My Servers=Продолжить использование «Мои серверы»‎ +DNS issue, unable to resolve wanip4unraidnet=DNS issue, unable to resolve wanip4.unraid.net +Enhance your experience with My Servers=Расширьте свои возможности с помощью пагина «Мои серверы»‎ +Enhance your Unraid experience with these My Servers BETA features=Enhance your Unraid experience with these
My Servers (BETA) features +Enhance your Unraid experience with these
My Servers BETA features=Enhance your Unraid experience with these
My Servers (BETA) features +Executes `unraid-api start`; no terminal needed= +Get started by installing the plugin= +Go to My Servers Dashboard= +Important=Важно +Install Plugin=Установить плагин +Installing My Servers beta=Установка «Мои серверы»‎ (бета) +Invalid 2FA token=Недействительный токен двухфакторной аутентификации +Invalid username or password=неправильное имя пользователя или пароль +Key management is done via the dropdown in the top right of the webGUI on every page= +No 2FA token detected=Токен двухфакторной аутентификации не обнаружен +No thanks=Спасибо, не надо +Not ready to purchase=Не готовы совершить покупку? +Note USB memory card readers are generally not supported because most do not present unique serial numbers=Note: USB memory card readers are generally not supported because most do not present unique serial numbers +Open Dropdown=Открыть выпадающее меню +Password confirmation must match=Подтверждение пароля должно совпадать +Please access this server via the My Servers Dashboard= +Please make sure there is a DNS server specified= +Please make sure your server time is accurate to within 5 minutes= +Please use a high quality name brand device at least 1GB in size= +Plus more on the way= +Receive an additional 15 days for your trial=Получите дополнительные 15 дней на пробную версию +Redeem Activation Code= +Registration keys are bound to your USB Flash boot device serial number GUID=с +Remove My Servers plugin=Удалить плагин «Мои серверы»‎ +Removing My Servers plugin=Удаление плагина «Мои серверы»‎ +Replace Key Ineligible=Заменить недопустимый ключ +Restart unraid-api= +Restarting=Перезапуск +Sign In Up=Вход/Регистрация +Start Trial=Начать пробный период +Stop unraid-api= +Thank you for choosing Unraid OS and My Servers=Благодарим вас, что выбрали Unraid OS и «Мои серверы»‎ +Thank you installing My Servers=Благодарим вас за установку «Мои серверы»‎ +This will connect your server to My Servers BETA=Это подключит ваш сервер к «Мои серверы»‎ BETA +To support more storage devices as your server grows click the Open Dropdown button= +To support more storage devices as your server grows click the Open Dropdown button=To support more storage devices as your server grows click the *Open Dropdown* button +To support more storage devices as your server grows click Upgrade Key=Чтобы поддерживать больше устройств хранения данных по мере роста вашего сервера, нажмите «Обновить ключ». +Transparent 2FA Token timed out= +Your server will not be usable until you purchase a Registration key or install a free 30-day Trial key=Ваш сервер нельзя будет использовать, пока вы не купите регистрационный ключ или не установите бесплатный 30-дневный пробный ключ. +Your Unraid registration key is ineligible for replacement as it is blacklisted=Ваш регистрационный ключ Unraid не подлежит замене, так как он занесён в чёрный список. +Oh no Are you pirating Unraid OS
Are you ready to buy a real license=О, нет! Вы занимаетесь пиратством Unraid OS?
Готовы ли вы купить настоящую лицензию? +Strict= +Local T2FA requires Use SSLTLS to be Strict, Unraid 610 or higher, and a myunraidnet certificate=Local T2FA requires Use SSL/TLS to be Strict, Unraid 6.10 or higher, and a *.myunraid.net certificate +Local T2FA requires Use SSLTLS to be Strict=Local T2FA requires Use SSL/TLS to be Strict +Local T2FA requires Use SSLTLS to be Strict and Unraid 610 or higher=Local T2FA requires Use SSL/TLS to be Strict and Unraid 6.10 or higher +Local T2FA requires Use SSLTLS to be Strict and a myunraidnet certificate=Local T2FA requires Use SSL/TLS to be Strict and a *.myunraid.net certificate +Local T2FA requires Unraid 610 or higher=Local T2FA requires Unraid 6.10 or higher +Local T2FA requires Unraid 610 or higher and a myunraidnet certificate=Local T2FA requires Unraid 6.10 or higher and a *.myunraid.net certificate +Local T2FA requires a myunraidnet certificate=Local T2FA requires a *.myunraid.net certificate diff --git a/users.txt b/users.txt index 23f8689..37f388d 100644 --- a/users.txt +++ b/users.txt @@ -1,19 +1,27 @@ -Add User= -Add= -Click to select PNG file= -Custom image= -Description= -Do not use reserved names= -Drag-n-drop a PNG file or click the image at the left= -Edit User= -Invalid user name= -Only PNG images are allowed= -Password too long= -Password= -Restore default image= -Retype password= -Show Hide password=Show / Hide password -Use a password up to 128 characters= -Use only lowercase letters, digits, underscores and dashes= -User %s has been deleted= -User name= +Add User=Добавить пользователя +Add=Добавить +Click Add User to create a user for remote shares access=Нажмите **Добавить пользователя**, чтобы создать пользователя для удаленного доступа к общим папкам. +Click to select PNG file=Нажмите, чтобы выбрать файл PNG +Custom image=Изображение пользователя +Description=Описание +Do not use reserved names=Не используйте зарезервированные имена +Drag-n-drop a PNG file or click the image at the left=Перетащите файл PNG или нажмите на изображение слева. +Edit User=Редактировать пользователя +Invalid Key=Неправильный ключ +Invalid user name=Неверное имя пользователя +Management Access=Управление доступом +No users are defined=Пользователи не определены +Only PNG images are allowed=Разрешены только изображения в формате PNG +Password too long=Пароль слишком длинный +Password=Пароль +Restore default image=Восстановить изображение по умолчанию +Retype password=Повторите пароль +Save=Сохранить +Shares Access=Доступ к общим ресурсам +Show Hide password=Показать/скрыть пароль +SSH authorized keys=SSH ключи авторизации +Syntax of the key is incorrect=Неправильный синтаксис ключа +Use a password up to 128 characters=Используйте пароль до 128 символов +Use only lowercase letters, digits, underscores and dashes=Используйте только строчные буквы, цифры, символы подчеркивания и тире. +User %s has been deleted=Пользователь %s удалён +User name=Имя пользователя diff --git a/vms.txt b/vms.txt index 361f684..3731a51 100644 --- a/vms.txt +++ b/vms.txt @@ -1,132 +1,143 @@ 20 EHCI=2.0 (EHCI) 30 nec XHCI=3.0 (nec XHCI) 30 qemu XHCI=3.0 (qemu XHCI) -Allocation= -and if using graphics device passthrough it too needs UEFI= -Are you sure= -Array must be started to view Virtual Machines=Array must be **started** to view Virtual Machines -Autostart= -Back= -Bus= -Capacity= -Change Icon= -Cleanup= -Click and Select cdrom image to install operating system= -Config Folder= -Copy Paste Domain XML Configuration Here=Copy & Paste Domain XML Configuration Here -CPU Mode= -CPUs= -Create= -Creating= -define the amount memory= -define the maximum amount of memory= -define type of cpu presented to this vm= -description of virtual machine= -Disk devices= -Download Folder= -Download, Click and Select virtio drivers image= -Downloading= -eg=e.g. -Emulated= -Extracting= +Allocation=Распределение +and if using graphics device passthrough it too needs UEFI=и если используется сквозное графическое устройство, ему тоже нужен UEFI +Are you sure=Вы уверены +Array must be started to view Virtual Machines=Массив должен быть **запущен** для просмотра виртуальных машин +Autostart=Автозапуск +Back=Назад +Bus=Шина +Capacity=Емкость +Change Icon=Изменить значок +Cleanup=Очистка +Click and Select cdrom image to install operating system=Нажмите и выберите образ CD, чтобы установить ОС. +Config Folder=Папка конфигурации +Copy Paste Domain XML Configuration Here=Скопируйте и вставьте сюда конфигурацию XML домена +CPU Mode=Режим ЦП +CPUs=Процессоры +Create=Создать +Creating=Создание +define the amount memory=определение объема оперативной памяти +define the maximum amount of memory=определение максимального объема оперативной памяти +define type of cpu presented to this vm=определение типа процессора, представленного этой ВМ +description of virtual machine=описание виртуальной машины +Disk devices=Дисковые устройства +Download Folder=Папка для скачивания +Download, Click and Select virtio drivers image=Загрузите, нажмите и выберите образ драйверов virtio +Downloading=Скачивание +eg=например +Emulated=Эмуляция +ETA=Расчетное время +Extracting=Извлечение Folder to save the LibreELEC image to= Folder to save the OpenELEC image to= -Form View= +Form View=Просмотр формы free= -Graphics Card= +Graphics Card=Видеокарта Graphics ROM BIOS= -Graphics= +Graphics=Графика +Guest not running or guest agent not installed= Host Passthrough= -Hyperv tweaks for Windows= +Hyperv tweaks for Windows=Твики Hyperv для Windows Hyper-V= -i440fx will work for most= -Icon= -Initial= -Invalid VM to edit= -ISO storage path doesnt exist=ISO storage path doesn't exist -ISO storage path was empty= -keyboard for VNC= -LibreELEC Version= +i440fx will work for most=i440fx будет работать для большинства +Icon=Иконка +Initial=Исходная +Interfaces=Интерфейсы +Invalid storage path=Недопустимый путь к хранилищу +Invalid VM to edit=Недопустимая ВМ для редактирования +IP Address=IP-адрес +ISO storage path doesnt exist=Путь к хранилищу ISO не существует +ISO storage path doesnt exist, please create the user share or empty folder first=ISO storage path doesn't exist, please create the user share (or empty folder) first +ISO storage path was empty=Путь к хранилищу ISO пуст +keyboard for VNC=клавиатура для VNC +LibreELEC Version=Версия LibreELEC LibreELEC= -Libvirt Service failed to start= -Logical CPUs= -Machine= -Manual= -Max= -MD5 verification failed, your download is incomplete or corrupted= +Libvirt Service failed to start=Не удалось запустить службу Libvirt +Logical CPUs=Логические процессоры +Machine=Машина +Manual=Выбрать +Max=Максимальная +MD5 verification failed, your download is incomplete or corrupted=Ошибка проверки MD5, загрузка неполная или повреждена mount tag inside vm= -My Workstation= -name of mount tag inside vm= -Name of virtual machine= -Network Bridge= -Network MAC= -Network Model= -No Virtual Machines installed= -None available= -Not enough free space, need at least= -Not running= -OpenELEC Version= +My Workstation=Моя рабочая станция +name of mount tag inside vm=имя тега монтирования внутри вм +Name of virtual machine=Имя виртуальной машины +Network Bridge=Сетевой мост +Network MAC=Сетевой MAC +Network Model=Модель сети +No Virtual Machines installed=Виртуальные машины не установлены +None available=Нет в наличии +Not enough free space, need at least=Недостаточно свободного места, нужно как минимум +Not running=Не запущен +OpenELEC Version=Версия OpenELEC OpenELEC= OS Install CDRom Bus= OS Install ISO= -Other PCI Devices= -OVMF requires a UEFI-compatable OS= +Other PCI Devices=Другие устройства PCI +OVMF requires a UEFI-compatable OS=OVMF требует UEFI-совместимой ОС OVMF= -password for VNC= -path of Unraid share= -path on Unraid share to save LibreELEC settings= -path on Unraid share to save OpenELEC settings= -Path to ROM BIOS file= -Please choose a folder the LibreELEC image will download to= -Please choose a folder the OpenELEC image will download to= -Primary= -Q35 for a newer machine model with PCIE= +OVMF TPM= +password for VNC=пароль для VNC +path of Unraid share=путь к общему ресурсу Unraid +path on Unraid share to save LibreELEC settings=путь к общему ресурсу Unraid для сохранения настроек LibreELEC +path on Unraid share to save OpenELEC settings=путь к общему ресурсу Unraid для сохранения настроек OpenELEC +Path to ROM BIOS file=Путь к файлу ROM BIOS +Please choose a folder the LibreELEC image will download to=Выберите папку, в которую будет загружен образ LibreELEC +Please choose a folder the OpenELEC image will download to=Выберите папку, в которую будет загружен образ OpenELEC +Pop-up Blocker is enabled Please add this site to your exception list=Pop-up Blocker is enabled! Please add this site to your exception list +Prefix=Префикс +Primary=Первичный +Q35 for a newer machine model with PCIE=Q35 для новой модели машины с PCIE QEMU64= -random mac, you can supply your own= -re-generate random mac address= -Remove LibreELEC image= -Remove OpenELEC image= -Remove this LibreELEC file= -Remove this OpenELEC file= -SeaBIOS will work for most= +random mac, you can supply your own=случайный MAC-адрес, вы можете поставить свой собственный +re-generate random mac address=повторно сгенерировать случайный MAC-адрес +Remove LibreELEC image=Удалить образ LibreELEC +Remove OpenELEC image=Удалить образ OpenELEC +Remove this LibreELEC file=Удалить этот файл LibreELEC +Remove this OpenELEC file=Удалить этот файл OpenELEC +SeaBIOS will work for most=SeaBIOS будет работать для большинства SeaBIOS= -Select the BIOS= -Select the LibreELEC version to use= -Select the machine model= -Select the OpenELEC version to use= -Select the USB Controller to emulate= -Separate sub-folder and image will be created based on Name= +Select the BIOS=Выберите BIOS +Select the LibreELEC version to use=Выберите версию LibreELEC для использования +Select the machine model=Выберите модель машины +Select the OpenELEC version to use=Выберите версию OpenELEC для использования +Select the USB Controller to emulate=Выберите USB-контроллер для эмуляции +Separate sub-folder and image will be created based on Name=Отдельная подпапка и образ будут созданы на основе имени shares= -Some OSes wont support USB3=Some OSes won't support USB3 -Sound Card= -Start All= -Start VM after creation= -Stop All= -Toggle VM autostart= -type of storage image= -Unknown action= -Unknown version= +Some OSes wont support USB3=Некоторые ОС не поддерживают USB3 +Sound Card=Звуковая карта +Specify a ISO storage path first= +Start All=Запустить все +Start VM after creation=Запустить виртуальную машину после создания +Stop All=Остановить всё +Toggle VM autostart=Переключить автозапуск ВМ +type of storage image=тип хранилища образа +Unknown action=Неизвестное действие +Unknown version=Неизвестная версия Unraid Mount tag= Unraid Share= -Updating= -USB Controller= -USB Devices= -vDisk Bus= -vDisk Location= -vDisk Size= -vDisk Type= +Updating=Обновление +USB Controller=USB-контроллер +USB Devices=USB-устройства +vDisk Bus=Шина vDisk +vDisk Location=Расположение vDisk +vDisk Size=Размер vDisk +vDisk Type=Тип vDisk vDisks= -video for VNC= +Verifying= +video for VNC=видео для VNC VirtIO Drivers CDRom Bus= VirtIO Drivers ISO= -Virtual Machines= -VM creation error= -VM image deletion error= -VNC Keyboard= -VNC Password= -VNC Video Driver= +Virtual Machines=Виртуальные машины +VM creation error=Ошибка создания ВМ +VM image deletion error=Ошибка удаления образа ВМ +VNC Keyboard=Клавиатура VNC +VNC Password=Пароль VNC +VNC Video Driver=Видеодрайвер VNC VNC= -Wasnt able to stop the process=Wasn't able to stop the process +Wasnt able to stop the process=Не удалось остановить процесс Windows 7XP=Windows 7/XP -Windows 82012, newer Linux distros=Windows 8/2012, newer Linux distros -XML View= +Windows 82012, newer Linux distros=Windows 8/2012, более новые дистрибутивы Linux +XML View=Просмотр XML