Contents
A screencast tool to display your keys, inspired by Screenflick.
This is an almost-complete rewrite of screenkey 0.2, featuring:
- Several keyboard translation methods
- Key composition/input method support
- Configurable font/size/position
- Highlighting of recent keystrokes
- Improved backspace processing
- Normal/Emacs/Mac caps modes
- Multi-monitor support
- Dynamic recording control
- Switch for visible shift and modifier sequences only
- Repeats compression
- Countless bug fixes
Execute without installation:
./screenkey
To install:
sudo ./setup.py install
Dependencies:
- Python 2.7 (no Python 3 support yet)
- PyGTK
- Pycairo
- setuptools (build only)
- DistUtils-Extra (build only)
- slop (https://github.com/naelstrof/slop)
- FontAwesome (for multimedia symbols)
- Python AppIndicator (required for Unity / GNOME Shell)
Install dependencies (on Debian/Ubuntu):
sudo apt-get install python-gtk2 python-setuptools python-distutils-extra
You can also install "screenkey" via ArchLinux's AUR package:
https://aur.archlinux.org/packages/screenkey
- Display time:
- Persistence (in seconds) of the output window after typing has stopped. Defaults to 2.5 seconds. When the window is persistent, display time still controls the time before the text is cleared.
- Persistent window:
- Forces the output window to be always visible, irregardless of typing activity. Mostly useful for interactive window placement and/or "fixed" positioning.
- Screen:
- Physical screen/monitor used for the output window.
- Position:
- Position of the output window. The position is normally relative to the chosen screen. If a window has been selected with "Select window/region", the position becomes relative to the window. If "fixed" is chosen, the output window's position and size are specified explicitly. See Interactive placement for more details.
- Font:
- Font used for the output window. A scalable font and wide Unicode coverage is required (the DejaVu family is highly recommended).
- Size:
- Size of the font used in the output window. Chooses proportionally between 8/12/24% of the screen size. When "fixed" positioning is used, size is ignored and the font will fill the available height of the output window.
- Keyboard mode:
Choose the translation method of keyboard events.
"Composed" attempts to show only the final results of key composition. Dead keys and any intermediate output during composition is not shown. Currently works correctly with XIM/IBUS, but only for on-the-spot editing. It can cause problems with complex input methods (support for wider compatibility is underway).
"Translated" shows the result of each keypress on the keyboard, accounting for the current keyboard locale and modifiers, but not composition. Pressing a dead key followed by a letter will show both keys.
"Raw" shows which key caps were pressed on the keyboard, without translation. For example, typing "!" (which is often located on top of the key "1") requires pressing "Shift+1", which is what this output mode shows. "Backspace mode", "Always visible Shift" and "Modifiers only" have no effect in this mode.
"Keysyms" shows the keysyms ("symbolic" names) of each pressed key as received by the server. Mostly useful for debugging.
- Backspace mode:
Controls the effect of "backspace" on the text in the output window.
"Normal" always inserts a backspace symbol in the output window.
"Baked" simulates the effect of backspace in the text only if the last keypress is a regular letter and no caret movement has been detected. In any other case, a backspace symbol is inserted instead.
"Full" is similar to "baked", but will eat through several other, less safe keys, such as tabs and returns.
- Modifiers mode:
- Select how modifiers keys (such as Control, Alt) are displayed in the output window. "Normal" uses traditional PC names (Ctrl+A) while "Mac" uses Mac symbols directly (⌘+A). The "Emacs" mode will display Emacs-style shortened keyboard sequences (C-A).
- Show Modifier sequences only:
- Only show modifier/control sequences in the output window. Bare, shifted or translated letters are not shown.
- Always show Shift:
Shift is normally hidden when the control sequence includes a letter that can differentiate between a shifted/non-shifted key. For example, Shift + "Control+a" is normally shown just as "Control+A" (notice the capital "A").
When "Always show Shift" is used, Shift is always included in modifier sequences, if pressed. Has no effect when using the "Emacs" modifiers mode.
- Show Whitespace characters:
- Convert regular whitespace characters (tabs and spaces) to a visible representation instead of showing a blank. Newlines are also hidden when unambiguous in multiline mode.
- Compress repeats:
- When enabled, contiguous repeated sequences are truncated after the requested threshold. A counter of total occurrences is shown instead, which is generally more legible.
To disable screenkey while recording (for example, during password prompts), press both control keys, or both shift keys, or both alt keys at the same time.
Press the same combination again to resume it.
This has the same effect of toggling the state from the system tray icon, but it's completely stealth: there's no feedback that screenkey is being switched on/off.
If you need the viewer to focus on a sentence you just typed, you can press a silent modifier (such as Shift, or Control) to keep the output window visible a little longer without prolonging the default timeout.
screenkey is normally positioned on the top/center/bottom part of the screen.
If you're recording a screencast only for a specific application, you can click on "Select window/region" to select on which window the output should be overlaid (slop must be installed for this task). When a window has been selected, top/center/bottom refer to the window's contents. Press "Reset" to restore the original behavior.
When "fixed" is chosen, the position of the output is specified directly. The cursor turns immediately into a crossbar: drag over the desired screen region (where the text should appear), or press "Esc" to abort. Again, press "Reset" to restore the original behavior.
The "geometry" argument follows the standard X11 geometry format
(WxH[+X+Y]) and can be provided by slop, which allows to select
windows and/or drag over the desired region interactively without the
need of calculating the coordinates manually.
When a geometry argument has been provided, the position (top/middle/bottom) becomes relative to the selected rectangle. For example, to overlay screenkey on top of an existing window, you can simply do:
./screenkey -g $(slop -n -f '%g')
To set the actual text rectangle instead, use "fixed" positioning. Using slop, you can combine both and simply drag the desired rectangle during selection:
./screenkey -p fixed -g $(slop -n -f '%g')
The default font is "Sans Bold", which is usually mapped to "DejaVu
Sans" on most Linux installations (look for the ttf-dejavu package).
It's a good all-around font which provides all the required glyphs and
has excellent readability.
For screencasts about programming, we recommend "DejaVu Sans Mono Bold" instead, which provides better differentiation among similar letterforms (0/O, I/l, etc).
"screenkey" supports several multimedia keys. To display them with symbols instead of text abbreviations, FontAwesome needs to be installed.
On Debian/Ubuntu, the font is available in the fonts-font-awesome
package. On Arch Linux the package is instead ttf-font-awesome.
"screenkey" should work correctly by default with any tiling window manager.
The original version of screenkey used to require customization for the output window to work/float correctly. These settings are no longer required with this fork, and can be safely removed.
If you don't have a system tray, you can either configure screenkey
through command line flags or use --show-settings to test the
configuration interactively.
To get transparency you need a compositor to be running. For example, "compton" or "unagi" are popular for their low impact on performance, but "xcompmgr" also works correctly without any additional configuration.
If you're recording a screencast where almost all editing is already
visible (for example, in vi or most other text editors), consider
using a bigger screen font instead, so that the viewer can read the text
directly while the program is being used.
If the control sequences you're typing are rare, you might even want to spell what you're doing instead of obscuring the screen with the typing output.
When doing screencasts involving a lot of mouse activity, or which require holding down modifiers to perform other mouse actions, key-mon might be a good companion to screenkey, or replace it entirely.
key-mon can be configured to show the state of key modifiers continuously and circle the location of mouse clicks ("visible click"). key-mon and screenkey complete each-other and can be used at the same time.
Screenkey is very sensitive to improperly configured input methods or
keyboard settings. Installing, removing or "playing around" with some
packages such as im-config, ibus, fcitx or scim might
leave the current settings in a half-broken state. Some distributions
are also known to have broken settings by default.
In short: the various environment flags (XMODIFIERS,
GTK_IM_MODULE, QT_IM_MODULE to name a few) need to be
consistent. They either should be all unset, or all set to the same
input method. When using ibus, fcitx or other complex methods,
the corresponding daemon must be running.
An "input method" is the mechanism which handles the task of
transforming key presses into characters. Latin languages mostly use a
straightforward key -> character mechanism, but other languages don't
have a key for each possible character and thus need extra logic.
Programs need to be told which input method to use, and this is
usually done through environment variables. There is one environment
variable for each graphical toolkit and it's set at the start of the
session, usually by a command in the ~/.profile file. Screenkey can
only record a program correctly if it's using the same input method as
the target.
To check the status of the environment, run the following inside a terminal:
echo XMODIFIERS=$XMODIFIERS echo GTK_IM_MODULE=$GTK_IM_MODULE echo QT_IM_MODULE=$QT_IM_MODULE
On a system with a Latin language and without any complex input method running you should see everything empty:
XMODIFIERS= GTK_IM_MODULE= QT_IM_MODULE=
On a system running "ibus" you should see:
XMODIFIERS=@im=ibus GTK_IM_MODULE=ibus QT_IM_MODULE=ibus
Additionally, the ibus package must be installed and the ibus daemon should be running. Check the output of:
$ pgrep -ax ibus-daemon 982 /usr/bin/ibus-daemon --xim
ibus-daemon should be present and must include --xim in the
command line. Likewise on a system using "fcitx" the following output
has to be expected:
XMODIFIERS=@im=fcitx GTK_IM_MODULE=fcitx QT_IM_MODULE=fcitx
In this case fcitx daemon should be running as well:
$ pgrep -ax fcitx 1053 /usr/bin/fcitx
If you see any mixture of the above, your system is likely to be incorrectly configured.
If the "ibus" or "fcitx" package are not installed, there are no daemons running and the variables are mostly empty, try simply unsetting all of them before running Screenkey in a terminal:
unset XMODIFIERS unset GTK_IM_MODULES unset QT_IM_MODULES screenkey
If screenkey runs correctly after these changes, check your startup
files such as ~/.profile, ~/.bash_profile,
~/.pam_environment files and remove the offending variables to make
the change permanent. You must log-out and log-in in order to be able to
run Screenkey normally after the change.
If you're running either ibus or fcitx but the variables contain
mixed values, set them manually using:
export XMODIFIERS=@im=ibus export GTK_IM_MODULE=ibus export QT_IM_MODULE=ibus screenkey
Again, if Screenkey works correctly after the change, inspect the content of your startup files to make the change permanent.
You should always check the documentation of your distribution for more details: the above guide is not meant to be exhaustive. There are other subtle ways to set the input method and daemon parameters. If all else fails, get in touch with the authors or file an issue on Github.
You can exit from Screenkey by right-clicking on it's status icon and selecting "Quit".
If you're using GNOME/Unity and cannot see any status icon please make
sure the python-appindicator package is installed. Run the following
inside a terminal to install as required:
sudo apt-get install python-appindicator
On any other desktop system Screenkey uses the regular system tray. If you don't have a systray or you cannot quit an existing Screenkey, use the following command in a terminal to kill it:
pkill -f screenkey
The proper way to exit when running Screenkey from a terminal is simply
by interrupting it with Ctrl+C.
Screenkey cannot currently capture any input directed to native Wayland programs such as the GNOME Terminal: only X11 programs are supported.
If you need to record a terminal session you'll have to switch to another X11 terminal emulator such as xterm, urxvt, mlterm, ...
"screenkey" can be found at https://www.thregr.org/~wavexx/software/screenkey/
screenkey's GIT repository is publicly accessible at:
https://github.com/wavexx/screenkey
- Benjamin Chrétien
- Dmitry Bushev
- Doug Patti
- Igor Bronovskyi
- Ivan Makfinsky
- Jacob Gardner
- Muneeb Shaikh
- Stanislav Seletskiy
- farrer (launchpad)
- zhum (launchpad)
- 伊冲