- How do I create a message with attachments?
- How do I get the main body of a message?
- How do I tell if a message has attachments?
- Why doesn't the
MimeMessageclass implementISerializableso that I can serialize a message to disk and read it back later? - How do I parse messages?
- How do I save messages?
- How do I save attachments?
- How do I get the email addresses in the From, To, and Cc headers?
- Why do attachments with unicode or long filenames appear as "ATT0####.dat" in Outlook?
- How do I decrypt PGP messages that are embedded in the main message text?
- How do I reply to a message using MimeKit?
- How do I forward a message?
Yes. MimeKit and MailKit are both completely free and open source. They are both covered under the MIT license.
To construct a message with attachments, the first thing you'll need to do is create a multipart/mixed
container which you'll then want to add the message body to first. Once you've added the body, you can
then add MIME parts to it that contain the content of the files you'd like to attach, being sure to set
the Content-Disposition header value to attachment. You'll probably also want to set the filename
parameter on the Content-Disposition header as well as the name parameter on the Content-Type
header. The most convenient way to do this is to use the
MimePart.FileName property which
will set both parameters for you as well as setting the Content-Disposition header value to attachment
if it has not already been set to something else.
var message = new MimeMessage ();
message.From.Add (new MailboxAddress ("Joey", "[email protected]"));
message.To.Add (new MailboxAddress ("Alice", "[email protected]"));
message.Subject = "How you doin?";
// create our message text, just like before (except don't set it as the message.Body)
var body = new TextPart ("plain") {
Text = @"Hey Alice,
What are you up to this weekend? Monica is throwing one of her parties on
Saturday and I was hoping you could make it.
Will you be my +1?
-- Joey
"
};
// create an image attachment for the file located at path
var attachment = new MimePart ("image", "gif") {
Content = new MimeContent (File.OpenRead (path), ContentEncoding.Default),
ContentDisposition = new ContentDisposition (ContentDisposition.Attachment),
ContentTransferEncoding = ContentEncoding.Base64,
FileName = Path.GetFileName (path)
};
// now create the multipart/mixed container to hold the message text and the
// image attachment
var multipart = new Multipart ("mixed");
multipart.Add (body);
multipart.Add (attachment);
// now set the multipart/mixed as the message body
message.Body = multipart;A simpler way to construct messages with attachments is to take advantage of the BodyBuilder class.
var message = new MimeMessage ();
message.From.Add (new MailboxAddress ("Joey", "[email protected]"));
message.To.Add (new MailboxAddress ("Alice", "[email protected]"));
message.Subject = "How you doin?";
var builder = new BodyBuilder ();
// Set the plain-text version of the message text
builder.TextBody = @"Hey Alice,
What are you up to this weekend? Monica is throwing one of her parties on
Saturday and I was hoping you could make it.
Will you be my +1?
-- Joey
";
// We may also want to attach a calendar event for Monica's party...
builder.Attachments.Add (@"C:\Users\Joey\Documents\party.ics");
// Now we just need to set the message body and we're done
message.Body = builder.ToMessageBody ();For more information, see Creating Messages.
(Note: for the TL;DR version, skip to the end)
MIME is a tree structure of parts. There are multiparts which contain other parts (even other multiparts). There are message parts which contain messages. And finally, there are leaf-node parts which contain content.
There are a few common message structures:
-
The message contains only a
text/plainortext/htmlpart (easy, just use that). -
The message contains a
multipart/alternativewhich will typically look a bit like this:multipart/alternative text/plain text/html -
Same as above, but the html part is inside a
multipart/relatedso that it can embed images:multipart/alternative text/plain multipart/related text/html image/jpeg image/png -
The message contains a textual body part as well as some attachments:
multipart/mixed text/plain or text/html application/octet-stream application/zip -
the same as above, but with the first part replaced with either #2 or #3. To illustrate:
multipart/mixed multipart/alternative text/plain text/html application/octet-stream application/zipor...
multipart/mixed multipart/alternative text/plain multipart/related text/html image/jpeg image/png application/octet-stream application/zip
Now, if you don't care about any of that and just want to get the text of
the first text/plain or text/html part you can find, that's easy.
MimeMessage has two convenience properties for this: TextBody and HtmlBody.
MimeMessage.HtmlBody, as the name implies, will traverse the MIME structure for you and find the most
appropriate body part with a Content-Type of text/html that can be interpreted as the message body.
Likewise, the TextBody property can be used to get the text/plain version of the message body.
For more information, see Working with Messages.
In most cases, a message with a body that has a MIME-type of multipart/mixed containing more than a
single part probably has attachments. As illustrated above, the first part of a multipart/mixed is
typically the textual body of the message, but it is not always quite that simple.
In general, MIME attachments will have a Content-Disposition header with a value of attachment.
To get the list of body parts matching this criteria, you can use the
MimeMessage.Attachments property.
Unfortunately, not all mail clients follow this convention and so you may need to write your own custom logic.
For example, you may wish to treat all body parts having a name or filename parameter set on them:
var attachments = message.BodyParts.OfType<MimePart> ().Where (part => !string.IsNullOrEmpty (part.FileName));A more sophisticated approach is to treat body parts not referenced by the main textual body part of the message as attachments. In other words, treat any body part not used for rendering the message as an attachment. For an example on how to do this, consider the following code snippets:
/// <summary>
/// Visits a MimeMessage and generates HTML suitable to be rendered by a browser control.
/// </summary>
class HtmlPreviewVisitor : MimeVisitor
{
List<MultipartRelated> stack = new List<MultipartRelated> ();
List<MimeEntity> attachments = new List<MimeEntity> ();
readonly string tempDir;
string body;
/// <summary>
/// Creates a new HtmlPreviewVisitor.
/// </summary>
/// <param name="tempDirectory">A temporary directory used for storing image files.</param>
public HtmlPreviewVisitor (string tempDirectory)
{
tempDir = tempDirectory;
}
/// <summary>
/// The list of attachments that were in the MimeMessage.
/// </summary>
public IList<MimeEntity> Attachments {
get { return attachments; }
}
/// <summary>
/// The HTML string that can be set on the BrowserControl.
/// </summary>
public string HtmlBody {
get { return body ?? string.Empty; }
}
protected override void VisitMultipartAlternative (MultipartAlternative alternative)
{
// walk the multipart/alternative children backwards from greatest level of faithfulness to the least faithful
for (int i = alternative.Count - 1; i >= 0 && body == null; i--)
alternative[i].Accept (this);
}
protected override void VisitMultipartRelated (MultipartRelated related)
{
var root = related.Root;
// push this multipart/related onto our stack
stack.Add (related);
// visit the root document
root.Accept (this);
// pop this multipart/related off our stack
stack.RemoveAt (stack.Count - 1);
}
// look up the image based on the img src url within our multipart/related stack
bool TryGetImage (string url, out MimePart image)
{
UriKind kind;
int index;
Uri uri;
if (Uri.IsWellFormedUriString (url, UriKind.Absolute))
kind = UriKind.Absolute;
else if (Uri.IsWellFormedUriString (url, UriKind.Relative))
kind = UriKind.Relative;
else
kind = UriKind.RelativeOrAbsolute;
try {
uri = new Uri (url, kind);
} catch {
image = null;
return false;
}
for (int i = stack.Count - 1; i >= 0; i--) {
if ((index = stack[i].IndexOf (uri)) == -1)
continue;
image = stack[i][index] as MimePart;
return image != null;
}
image = null;
return false;
}
/// <summary>
/// Get a file:// URI for the image attachment.
/// </summary>
/// <remarks>
/// Saves the image attachment to a temp file and returns a file:// URI for the
/// temp file.
/// </remarks>
/// <returns>The file:// URI.</returns>
/// <param name="image">The image attachment.</param>
/// <param name="url">The original HTML image URL.</param>
string GetFileUri (MimePart image, string url)
{
string fileName = url.Replace (':', '_').Replace ('\\', '_').Replace ('/', '_');
string path = Path.Combine (tempDir, fileName);
if (!File.Exists (path)) {
using (var output = File.Create (path))
image.Content.DecodeTo (output);
}
return "file://" + path.Replace ('\\', '/');
}
/// <summary>
/// Get a file:// URI for the image attachment.
/// </summary>
/// <remarks>
/// Saves the image attachment to a temp file and returns a file:// URI for the
/// temp file.
/// </remarks>
/// <returns>The file:// URI.</returns>
/// <param name="image">The image attachment.</param>
/// <param name="url">The original HTML image URL.</param>
string GetDataUri (MimePart image)
{
using (var memory = new MemoryStream ()) {
image.Content.DecodeTo (memory);
var buffer = memory.GetBuffer ();
var length = (int) memory.Length;
var base64 = Convert.ToBase64String (buffer, 0, length);
return string.Format ("data:{0};base64,{1}", image.ContentType.MimeType, base64);
}
}
// Replaces <img src=...> urls that refer to images embedded within the message with
// "file://" urls that the browser control will actually be able to load.
void HtmlTagCallback (HtmlTagContext ctx, HtmlWriter htmlWriter)
{
if (ctx.TagId == HtmlTagId.Image && !ctx.IsEndTag && stack.Count > 0) {
ctx.WriteTag (htmlWriter, false);
// replace the src attribute with a file:// URL
foreach (var attribute in ctx.Attributes) {
if (attribute.Id == HtmlAttributeId.Src) {
MimePart image;
string url;
if (!TryGetImage (attribute.Value, out image)) {
htmlWriter.WriteAttribute (attribute);
continue;
}
// Note: you can either use a "file://" URI or you can use a
// "data:" URI, the choice is yours.
url = GetFileUri (image, attribute.Value);
//uri = GetDataUri (image);
htmlWriter.WriteAttributeName (attribute.Name);
htmlWriter.WriteAttributeValue (url);
} else {
htmlWriter.WriteAttribute (attribute);
}
}
} else if (ctx.TagId == HtmlTagId.Body && !ctx.IsEndTag) {
ctx.WriteTag (htmlWriter, false);
// add and/or replace oncontextmenu="return false;"
foreach (var attribute in ctx.Attributes) {
if (attribute.Name.ToLowerInvariant () == "oncontextmenu")
continue;
htmlWriter.WriteAttribute (attribute);
}
htmlWriter.WriteAttribute ("oncontextmenu", "return false;");
} else {
// pass the tag through to the output
ctx.WriteTag (htmlWriter, true);
}
}
protected override void VisitTextPart (TextPart entity)
{
TextConverter converter;
if (body != null) {
// since we've already found the body, treat this as an attachment
attachments.Add (entity);
return;
}
if (entity.IsHtml) {
converter = new HtmlToHtml {
HtmlTagCallback = HtmlTagCallback
};
} else if (entity.IsFlowed) {
var flowed = new FlowedToHtml ();
string delsp;
if (entity.ContentType.Parameters.TryGetValue ("delsp", out delsp))
flowed.DeleteSpace = delsp.ToLowerInvariant () == "yes";
converter = flowed;
} else {
converter = new TextToHtml ();
}
body = converter.Convert (entity.Text);
}
protected override void VisitTnefPart (TnefPart entity)
{
// extract any attachments in the MS-TNEF part
attachments.AddRange (entity.ExtractAttachments ());
}
protected override void VisitMessagePart (MessagePart entity)
{
// treat message/rfc822 parts as attachments
attachments.Add (entity);
}
protected override void VisitMimePart (MimePart entity)
{
// realistically, if we've gotten this far, then we can treat this as an attachment
// even if the IsAttachment property is false.
attachments.Add (entity);
}
}And the way you'd use this visitor might look something like this:
void Render (MimeMessage message)
{
var tmpDir = Path.Combine (Path.GetTempPath (), message.MessageId);
var visitor = new HtmlPreviewVisitor (tmpDir);
Directory.CreateDirectory (tmpDir);
message.Accept (visitor);
DisplayHtml (visitor.HtmlBody);
DisplayAttachments (visitor.Attachments);
}Once you've rendered the message using the above technique, you'll have a list of attachments that
were not used, even if they did not match the simplistic criteria used by the MimeMessage.Attachments
property.
Q: Why doesn't the MimeMessage class implement ISerializable so that I can serialize a message to disk and read it back later?
The MimeKit API was designed to use the existing MIME format for serialization. In light of this, the ability to use the .NET serialization API and format did not make much sense to support.
You can easily serialize a MimeMessage to a stream using the WriteTo methods.
For more information on this topic, see the following other two topics:
One of the more common operations that MimeKit is meant for is parsing email messages from arbitrary streams. There are two ways of accomplishing this task.
The first way is to use one of the Load methods
on MimeMessage:
// Load a MimeMessage from a stream
var message = MimeMessage.Load (stream);Or you can load a message from a file path:
// Load a MimeMessage from a file path
var message = MimeMessage.Load ("message.eml");The second way is to use the MimeParser class. For the most
part, using the MimeParser directly is not necessary unless you wish to parse a Unix mbox file stream. However, this is
how you would do it:
// Load a MimeMessage from a stream
var parser = new MimeParser (stream, MimeFormat.Entity);
var message = parser.ParseMessage ();For Unix mbox file streams, you would use the parser like this:
// Load every message from a Unix mbox
var parser = new MimeParser (stream, MimeFormat.Mbox);
while (!parser.IsEndOfStream) {
var message = parser.ParseMessage ();
// do something with the message
}One you've got a MimeMessage, you can save it to a file using the WriteTo method:
message.WriteTo ("message.eml");The WriteTo method also has overloads that allow you to write the message to a Stream instead.
By default, the WriteTo method will save the message using DOS line-endings on Windows and Unix
line-endings on Unix-based systems such as macOS and Linux. You can override this behavior by
passing a FormatOptions argument to
the method:
// clone the default formatting options
var format = FormatOptions.Default.Clone ();
// override the line-endings to be DOS no matter what platform we are on
format.NewLineFormat = NewLineFormat.Dos;
message.WriteTo (format, "message.eml");Note: While it may seem like you can safely use the ToString method to serialize a message,
DON'T DO IT! This is not safe! MIME messages cannot be accurately represented as
strings due to the fact that each MIME part of the message may be encoded in a different
character set, thus making it impossible to convert the message into a unicode string using a
single charset to do the conversion (which is exactly what ToString does).
If you've already got a MimePart that represents the attachment that you'd like to save, here's how you might save it:
using (var stream = File.Create (fileName))
attachment.Content.DecodeTo (stream);Pretty simple, right?
But what if your attachment is actually a MessagePart?
To save the content of a message/rfc822 part, you'd use the following code snippet:
using (var stream = File.Create (fileName))
attachment.Message.WriteTo (stream);If you are iterating over all of the attachments in a message, you might do something like this:
foreach (var attachment in message.Attachments) {
var fileName = attachment.ContentDisposition?.FileName ?? attachment.ContentType.Name;
using (var stream = File.Create (fileName)) {
if (attachment is MessagePart) {
var rfc822 = (MessagePart) attachment;
rfc822.Message.WriteTo (stream);
} else {
var part = (MimePart) attachment;
part.Content.DecodeTo (stream);
}
}
}The From,
To, and
Cc properties of a
MimeMessage are all of type
InternetAddressList. An
InternetAddressList is a list of
InternetAddress items. This is
where most people start to get lost because an InternetAddress is an abstract class that only
really has a Name property.
As you've probably already discovered, the Name property contains the name of the person
(if available), but what you want is his or her email address, not their name.
To get the email address, you'll need to figure out what subclass of address each InternetAddress
really is. There are 2 subclasses of InternetAddress:
GroupAddress and
MailboxAddress.
A GroupAddress is a named group of more InternetAddress items that are contained within the
Members property. To get
an idea of what a group address represents, consider the following examples:
To: My Friends: Joey <[email protected]>, Monica <[email protected]>, "Mrs. Chanandler Bong"
<[email protected]>, Ross <[email protected]>, Rachel <[email protected]>;
In the above example, the To header's InternetAddressList will contain only 1 item which will be a
GroupAddress with a Name value of My Friends. The Members property of the GroupAddress will
contain 5 more InternetAddress items (which will all be instances of MailboxAddress).
The above example, however, is not very likely to ever be seen in messages you deal with. A far more common example would be the one below:
To: undisclosed-recipients:;
Most of the time, the From, To, and Cc headers will only contain mailbox addresses. As you will
notice, a MailboxAddress has an
Address property which will
contain the email address of the mailbox. In the following example, the Address property will
contain the value [email protected]:
To: John Smith <[email protected]>
If you only care about getting a flattened list of the mailbox addresses in a From, To, or Cc
header, you can do something like this:
foreach (var mailbox in message.To.Mailboxes)
Console.WriteLine ("{0}'s email address is {1}", mailbox.Name, mailbox.Address);An attachment filename is stored as a MIME parameter on the Content-Disposition header. Unfortunately,
the original MIME specifications did not specify a method for encoding non-ASCII filenames. In 1997,
rfc2184 (later updated by rfc2231)
was published which specified an encoding mechanism to use for encoding them. Since there was a window in
time where the MIME specifications did not define a way to encode them, some mail client developers decided
to use the mechanism described by rfc2047 which was meant for
encoding non-ASCII text in headers. While this may at first seem logical, the problem with this approach
was that rfc2047 encoded-word tokens are not allowed to be in quotes (as well as some other issues) and
so another, more appropriate, encoding mechanism was needed.
Outlook is one of those mail clients which decided to encode filenames using the mechanism described in rfc2047 and until Outlook 2007, did not support filenames encoded using the mechanism defined in rfc2231.
As of MimeKit v1.2.18, it is possible to configure MimeKit to use the rfc2047 encoding mechanism for filenames in the following two ways:
The first way is to set the encoding method on each individual Parameter:
Parameter param;
if (attachment.ContentDisposition.Parameters.TryGetValue ("filename", out param))
param.EncodingMethod = ParameterEncodingMethod.Rfc2047;Or
foreach (var param in attachment.ContentDisposition.Parameters) {
param.EncodingMethod = ParameterEncodingMethod.Rfc2047;
}Some PGP-enabled mail clients, such as Thunderbird, embed encrypted PGP blurbs within the text/plain body
of the message rather than using the PGP/MIME format that MimeKit prefers.
These messages often look something like this:
Return-Path: <[email protected]>
Received: from [127.0.0.1] (hostname.example.com. [201.95.8.17])
by mx.google.com with ESMTPSA id l67sm26628445yha.8.2014.04.27.13.49.44
for <[email protected]>
(version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128);
Sun, 27 Apr 2014 13:49:44 -0700 (PDT)
Message-ID: <[email protected]>
Date: Sun, 27 Apr 2014 17:49:43 -0300
From: Die-Hard PGP Fan <[email protected]>
User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
MIME-Version: 1.0
To: undisclosed-recipients:;
Subject: Test of inline encrypted PGP blocks
X-Enigmail-Version: 1.6
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
X-Antivirus: avast! (VPS 140427-1, 27/04/2014), Outbound message
X-Antivirus-Status: Clean
-----BEGIN PGP MESSAGE-----
Charset: ISO-8859-1
Version: GnuPG v2.0.22 (MingW32)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
SGFoISBJIGZvb2xlZCB5b3UsIHRoaXMgdGV4dCBpc24ndCBhY3R1YWxseSBlbmNy
eXB0ZWQgd2l0aCBQR1AsCml0J3MgYWN0dWFsbHkgb25seSBiYXNlNjQgZW5jb2Rl
ZCEKCkknbSBqdXN0IHVzaW5nIHRoaXMgYXMgYW4gZXhhbXBsZSwgdGhvdWdoLCBz
byBpdCBkb2Vzbid0IHJlYWxseSBtYXR0ZXIuCgpGb3IgdGhlIHNha2Ugb2YgYXJn
dW1lbnQsIHdlJ2xsIHByZXRlbmQgdGhhdCB0aGlzIGlzIGFjdHVhbGx5IGFuIGVu
Y3J5cHRlZApibHVyYi4gTW1ta2F5PyBUaGFua3MuCg==
-----END PGP MESSAGE-----
To deal with these kinds of messages, I've added a method to OpenPgpContext called GetDecryptedStream which
can be used to get the raw decrypted stream.
There are actually 2 variants of this method:
public Stream GetDecryptedStream (Stream encryptedData, out DigitalSignatureCollection signatures)and
public Stream GetDecryptedStream (Stream encryptedData)The first variant is useful in cases where the encrypted PGP blurb is also digitally signed, allowing you to get your hands on the list of digitial signatures in order for you to verify each of them.
To decrypt the content of the message, you'll want to locate the TextPart (in this case, it'll just be
message.Body)
and then do this:
static Stream DecryptEmbeddedPgp (TextPart text)
{
using (var memory = new MemoryStream ()) {
text.Content.DecodeTo (memory);
memory.Position = 0;
using (var ctx = new MyGnuPGContext ()) {
return ctx.GetDecryptedStream (memory);
}
}
}
What you do with that decrypted stream is up to you. It's up to you to figure out what the decrypted content is (is it text? a jpeg image? a video?) and how to display it to the user.
Replying to a message is fairly simple. For the most part, you'd just create the reply message the same way you'd create any other message. There are only a few slight differences:
- In the reply message, you'll want to prefix the
Subjectheader with"Re: "if the prefix doesn't already exist in the message you are replying to (in other words, if you are replying to a message with aSubjectof"Re: party tomorrow night!", you would not prefix it with another"Re: "). - You will want to set the reply message's
In-Reply-Toheader to the value of theMessage-Idheader in the original message. - You will want to copy the original message's
Referencesheader into the reply message'sReferencesheader and then append the original message'sMessage-Idheader. - You will probably want to "quote" the original message's text in the reply.
If this logic were to be expressed in code, it might look something like this:
public static MimeMessage Reply (MimeMessage message, MailboxAddress from, bool replyToAll)
{
var reply = new MimeMessage ();
reply.From.Add (from);
// reply to the sender of the message
if (message.ReplyTo.Count > 0) {
reply.To.AddRange (message.ReplyTo);
} else if (message.From.Count > 0) {
reply.To.AddRange (message.From);
} else if (message.Sender != null) {
reply.To.Add (message.Sender);
}
if (replyToAll) {
// include all of the other original recipients - TODO: remove ourselves from these lists
reply.To.AddRange (message.To);
reply.Cc.AddRange (message.Cc);
}
// set the reply subject
if (!message.Subject.StartsWith ("Re:", StringComparison.OrdinalIgnoreCase))
reply.Subject = "Re: " + message.Subject;
else
reply.Subject = message.Subject;
// construct the In-Reply-To and References headers
if (!string.IsNullOrEmpty (message.MessageId)) {
reply.InReplyTo = message.MessageId;
foreach (var id in message.References)
reply.References.Add (id);
reply.References.Add (message.MessageId);
}
// quote the original message text
using (var quoted = new StringWriter ()) {
var sender = message.Sender ?? message.From.Mailboxes.FirstOrDefault ();
quoted.WriteLine ("On {0}, {1} wrote:", message.Date.ToString ("f"), !string.IsNullOrEmpty (sender.Name) ? sender.Name : sender.Address);
using (var reader = new StringReader (message.TextBody)) {
string line;
while ((line = reader.ReadLine ()) != null) {
quoted.Write ("> ");
quoted.WriteLine (line);
}
}
reply.Body = new TextPart ("plain") {
Text = quoted.ToString ()
};
}
return reply;
}But what if you wanted to reply to a message and quote the HTML formatting of the original message body (assuming it has an HTML body) while still including the embedded images?
This gets a bit more complicated, but it's still doable...
The first thing we'd need to do is implement our own MimeVisitor to handle this:
public class ReplyVisitor : MimeVisitor
{
readonly Stack<Multipart> stack = new Stack<Multipart> ();
MimeMessage original, reply;
MailboxAddress from;
bool replyToAll;
/// <summary>
/// Creates a new ReplyVisitor.
/// </summary>
public ReplyVisitor (MailboxAddress from, bool replyToAll)
{
this.replyToAll = replyToAll;
this.from = from;
}
/// <summary>
/// Gets the reply.
/// </summary>
/// <value>The reply.</value>
public MimeMessage Reply {
get { return reply; }
}
void Push (MimeEntity entity)
{
var multipart = entity as Multipart;
if (reply.Body == null) {
reply.Body = entity;
} else {
var parent = stack.Peek ();
parent.Add (entity);
}
if (multipart != null)
stack.Push (multipart);
}
void Pop ()
{
stack.Pop ();
}
static string GetOnDateSenderWrote (MimeMessage message)
{
var sender = message.Sender != null ? message.Sender : message.From.Mailboxes.FirstOrDefault ();
var name = sender != null ? (!string.IsNullOrEmpty (sender.Name) ? sender.Name : sender.Address) : "an unknown sender";
return string.Format ("On {0}, {1} wrote:", message.Date.ToString ("f"), name);
}
/// <summary>
/// Visit the specified message.
/// </summary>
/// <param name="message">The message.</param>
public override void Visit (MimeMessage message)
{
reply = new MimeMessage ();
original = message;
stack.Clear ();
reply.From.Add (from.Clone ());
// reply to the sender of the message
if (message.ReplyTo.Count > 0) {
reply.To.AddRange (message.ReplyTo);
} else if (message.From.Count > 0) {
reply.To.AddRange (message.From);
} else if (message.Sender != null) {
reply.To.Add (message.Sender);
}
if (replyToAll) {
// include all of the other original recipients - TODO: remove ourselves from these lists
reply.To.AddRange (message.To);
reply.Cc.AddRange (message.Cc);
}
// set the reply subject
if (!message.Subject.StartsWith ("Re:", StringComparison.OrdinalIgnoreCase))
reply.Subject = "Re: " + message.Subject;
else
reply.Subject = message.Subject;
// construct the In-Reply-To and References headers
if (!string.IsNullOrEmpty (message.MessageId)) {
reply.InReplyTo = message.MessageId;
foreach (var id in message.References)
reply.References.Add (id);
reply.References.Add (message.MessageId);
}
base.Visit (message);
}
/// <summary>
/// Visit the specified entity.
/// </summary>
/// <param name="entity">The MIME entity.</param>
/// <exception cref="System.NotSupportedException">
/// Only Visit(MimeMessage) is supported.
/// </exception>
public override void Visit (MimeEntity entity)
{
throw new NotSupportedException ();
}
protected override void VisitMultipartAlternative (MultipartAlternative alternative)
{
var multipart = new MultipartAlternative ();
Push (multipart);
for (int i = 0; i < alternative.Count; i++)
alternative[i].Accept (this);
Pop ();
}
protected override void VisitMultipartRelated (MultipartRelated related)
{
var multipart = new MultipartRelated ();
var root = related.Root;
Push (multipart);
root.Accept (this);
for (int i = 0; i < related.Count; i++) {
if (related[i] != root)
related[i].Accept (this);
}
Pop ();
}
protected override void VisitMultipart (Multipart multipart)
{
foreach (var part in multipart) {
if (part is MultipartAlternative)
part.Accept (this);
else if (part is MultipartRelated)
part.Accept (this);
else if (part is TextPart)
part.Accept (this);
}
}
void HtmlTagCallback (HtmlTagContext ctx, HtmlWriter htmlWriter)
{
if (ctx.TagId == HtmlTagId.Body && !ctx.IsEmptyElementTag) {
if (ctx.IsEndTag) {
// end our opening <blockquote>
htmlWriter.WriteEndTag (HtmlTagId.BlockQuote);
// pass the </body> tag through to the output
ctx.WriteTag (htmlWriter, true);
} else {
// pass the <body> tag through to the output
ctx.WriteTag (htmlWriter, true);
// prepend the HTML reply with "On {DATE}, {SENDER} wrote:"
htmlWriter.WriteStartTag (HtmlTagId.P);
htmlWriter.WriteText (GetOnDateSenderWrote (original));
htmlWriter.WriteEndTag (HtmlTagId.P);
// Wrap the original content in a <blockquote>
htmlWriter.WriteStartTag (HtmlTagId.BlockQuote);
htmlWriter.WriteAttribute (HtmlAttributeId.Style, "border-left: 1px #ccc solid; margin: 0 0 0 .8ex; padding-left: 1ex;");
ctx.InvokeCallbackForEndTag = true;
}
} else {
// pass the tag through to the output
ctx.WriteTag (htmlWriter, true);
}
}
string QuoteText (string text)
{
using (var quoted = new StringWriter ()) {
quoted.WriteLine (GetOnDateSenderWrote (original));
using (var reader = new StringReader (text)) {
string line;
while ((line = reader.ReadLine ()) != null) {
quoted.Write ("> ");
quoted.WriteLine (line);
}
}
return quoted.ToString ();
}
}
protected override void VisitTextPart (TextPart entity)
{
string text;
if (entity.IsHtml) {
var converter = new HtmlToHtml {
HtmlTagCallback = HtmlTagCallback
};
text = converter.Convert (entity.Text);
} else if (entity.IsFlowed) {
var converter = new FlowedToText ();
text = converter.Convert (entity.Text);
text = QuoteText (text);
} else {
// quote the original message text
text = QuoteText (entity.Text);
}
var part = new TextPart (entity.ContentType.MediaSubtype.ToLowerInvariant ()) {
Text = text
};
Push (part);
}
protected override void VisitMessagePart (MessagePart entity)
{
// don't descend into message/rfc822 parts
}
}public static MimeMessage Reply (MimeMessage message, MailboxAddress from, bool replyToAll)
{
var visitor = new ReplyVisitor (from, replyToAll);
visitor.Visit (message);
return visitor.Reply;
}There are 2 common ways of forwarding a message: attaching the original message as an attachment and inlining the message body much like replying typically does. Which method you choose is up to you.
To forward a message by attaching it as an attachment, you would do do something like this:
public static MimeMessage Forward (MimeMessage original, MailboxAddress from, IEnumerable<InternetAddress> to)
{
var message = new MimeMessage ();
message.From.Add (from);
message.To.AddRange (to);
// set the forwarded subject
if (!original.Subject.StartsWith ("FW:", StringComparison.OrdinalIgnoreCase))
message.Subject = "FW: " + original.Subject;
else
message.Subject = original.Subject;
// create the main textual body of the message
var text = new TextPart ("plain") { Text = "Here's the forwarded message:" };
// create the message/rfc822 attachment for the original message
var rfc822 = new MessagePart { Message = original };
// create a multipart/mixed container for the text body and the forwarded message
var multipart = new Multipart ("mixed");
multipart.Add (text);
multipart.Add (rfc822);
// set the multipart as the body of the message
message.Body = multipart;
return message;
}To forward a message by inlining the original message's text content, you can do something like this:
public static MimeMessage Forward (MimeMessage original, MailboxAddress from, IEnumerable<InternetAddress> to)
{
var message = new MimeMessage ();
message.From.Add (from);
message.To.AddRange (to);
// set the forwarded subject
if (!original.Subject.StartsWith ("FW:", StringComparison.OrdinalIgnoreCase))
message.Subject = "FW: " + original.Subject;
else
message.Subject = original.Subject;
// quote the original message text
using (var text = new StringWriter ()) {
text.WriteLine ();
text.WriteLine ("-------- Original Message --------");
text.WriteLine ("Subject: {0}", original.Subject);
text.WriteLine ("Date: {0}", DateUtils.FormatDate (original.Date));
text.WriteLine ("From: {0}", original.From);
text.WriteLine ("To: {0}", original.To);
text.WriteLine ();
text.Write (original.TextBody);
message.Body = new TextPart ("plain") {
Text = text.ToString ()
};
}
return message;
}Keep in mind that not all messages will have a TextBody available, so you'll have to find a way to handle those cases.
Since classes like HttpWebResponse take care of parsing the HTTP headers (which includes the Content-Type
header) and only offer a content stream to consume, MimeKit provides a way to deal with this using the following
two static methods on MimeEntity:
public static MimeEntity Load (ParserOptions options, ContentType contentType, Stream content, CancellationToken cancellationToken = default (CancellationToken));
public static MimeEntity Load (ContentType contentType, Stream content, CancellationToken cancellationToken = default (CancellationToken));Here's how you might use these methods:
MimeEntity ParseMultipartFormData (HttpWebResponse response)
{
var contentType = ContentType.Parse (response.ContentType);
return MimeEntity.Load (contentType, response.GetResponseStream ());
}