Name | Toolhead | KUSBA Version | Notes | By |
---|---|---|---|---|
StealthBurner Mount | Voron StealthBurner | v2.3 & v2.4 | Limits X travel very slightly (negligible) | xbst_ |
StealthBurner Cover | Voron StealthBurner | v2.3 & v2.4 | Optional cover, further limits X travel but only a few mm | Samwiseg0 |
AfterBurner Mount | Voron AfterBurner | v2.3 & v2.4 | UNTESTED but should work. Front mount. | xbst_ |
Mini-SB Front Mount | Voron Mini-StealthBurner | v2.3 & v2.4 | Easiest mount to attach/remove. Very similar to the Mini-AB mount | xbst_ |
Mini-SB Rear Mount | Voron Mini-StealthBurner | v2.3 & v2.4 | If you prefer accelerometers near the carriage use this one. Alternate strain relief with the KUSBA mount. Not compatible with toolhead PCBs | xbst_ |
Mini-AB Front Mount | Voron Mini-AfterBurner | v2.3 & v2.4 | Mounts the KUSBA in front of the toolhead, replace the 2 long M3 screws | xbst_ |
Mini-AB Cover | Voron Mini-AfterBurner | v2.3 & v2.4 | Optional cover | Samwiseg0 |
M6 KUSBA Nozzle Mount | M6 Nozzle Mount | v2.3 & v2.4 | Cover recommended so Tap homing can be used. Requires M6 SHCS/BHCS 10mm screw, remove nozzle. Add "axes_map: y, x, z" to [adxl345] section config for proper orientation with the USB-C facing forward. | GiulianoM |
Dragon Burner Mount | Dragon Burner | v2.3 & v2.4 | rigonzalez6 | |
MicroSwiss NG Mount | MicroSwiss NG Direct Drive | v2.3 & v2.4 | It uses inserted M3 nuts to mount the KUSBA board and fix it to the extruder backplate. Print details | luisillo26 |
Feel free to contribute more mounts. Either create a PR or DM me on Discord to contribute.
KUSBA v1.0 users can use the standard ADXL345 mounts. The mount holes are the same as the GY ADXL345 module, size might be a problem.