BW128x64 radios (Taranis x9lite) have no config script and EdgeTx model copy function does not copy config file

[alccrl]

Hi,
trying to put into work a new (copied) model on tranmitter with EdgeTx and Elrs,
copied from a working model,
after troubleshooting ("NO TELEMETRY") on the new model, I discovered that
Yaapu Config script file in SD content for 128x64B&W radios was missing.
and that EdgeTx copy model functionn did not create a config file for the copied model.

Hence ...
I manually copied the model script file working into a new model file, changed the name to the new model name and
now script for new (copied) model works.

Version : Have a lok at dev branch on github.
Other details on request.

Alfredo

[alccrl]

Addendum:
I mean I copied yaapu script model file, not EdgeTx model file :
in SDCARD/MODELS/yaapu/
I copied MODEL_A.cfg into MODEL_B.cfg.
This operation is not made automatically by creating MODEL_B from MODEL_A using EdgeTx ModelCopy menu.
And there is no configuration yaapu script usable to do it manually (CRSF telemetry was necessary to put into work arducopter CRSF telemetry on 900 Mhz radio link for MODEL_B.

EdgeTx 2.9.2
Arducopter 4.6 dev
Elrs 3.3.1
SpeedyBeeF4V3 FC
Taranis x9lite transmitter
CRSF telemetry on 868 Mhz radio link
Yaapu widget 2.0.0. beta1 for 128x64 displays
Binding by Phrase (same for MODEL_A and MODEL_B).

Alfredo

[menschel]

I had the same issue and found help.

https://discuss.ardupilot.org/t/help-needed-with-yaapu-lua-script-and-telemetry-setup/113013/6

It comes down to being on the yaapu telemetry page and pushing RTN followed by TELE to access the config.
Scroll to the bottom, select CRSF and reboot the radio.
A high telemetry ratio 1/4 is needed. I had RC failsafe issues with 1/32.

[alccrl]

Your suggested link explains how to configure ELRS on Yaapu from scratch.

Problems arise when You copy or create another (elrs) model on transmitter.
Moreover ...,
I did not succeded in using two elrs 900 receivers on two different quads with same transmitter.
I searched a way to configure different pass phrases for each quad (two different models on same transmitter), but I had to use same passw for both... this topic is not very clear on elrs site, so I stopped searching a solution.

Alfredo

[menschel]

OK, then I misunderstood that part.

I just tested copying models on the tx12mk2.

For me, it works. I can copy the model, switch to the copy of the model and the yaapu screen picks up telemetry right away.

I don't have a second receiver right now.