You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
It is a smart on/off switch coupled with a temperature and humidity sensor. It can be added to ZHA, but only functions as an on/off switch, and does not report temperature or humidity. I believe that this device will require a custom quirk.
Solution description
A custom quirk to support this device would be necessary.
Snap ... same issue.... have you found a work around yet? BTW, how do you power your device? I'm only using it as a 'main' (rather than battery) Zigbee temp sensor.... but only the 5v input seems to power it up.... I had hoped that 240v (regardless of whether I used it as a switch) would provide power.
Nope, no luck yet. I got the switch for free as part of Amazon Vine, so not in a big rush to get it to work. I am sure it will be supported eventually! Currently powering it with this switching power adapter. Simply cut off the connector, strip the wires, and connect them directly to the switch.
Problem description
I recently acquired this device: https://www.amazon.com/dp/B0D63CR311
It is a smart on/off switch coupled with a temperature and humidity sensor. It can be added to ZHA, but only functions as an on/off switch, and does not report temperature or humidity. I believe that this device will require a custom quirk.
Solution description
A custom quirk to support this device would be necessary.
Screenshots/Video
No response
Device signature
Device signature
Diagnostic information
Diagnostic information
Logs
No response
Custom quirk
No response
Additional information
No response
The text was updated successfully, but these errors were encountered: