0.0.93

This release:

• RFC: Tuya data refactoring (implicit conversion of tuya.Data) (#2017) @Shulyaka
• Add support for linky_status (MOTDETAT "Etat du Linky (From V13)") introduced in firmware v13 for historical mode only (#2213) @pdecat
• Adding Appartme APRM-04-001 TRV (#2210) @MattWestb
• Add TuyaTripleGang_var05 for TS0013 devices (#2207) @javicalle
• Add _TZE200_m9skfctm to TuyaSmokeDetector0601 (#2201) @javicalle
• Adding timesync response for Siterwell RTVs (#2197) @MattWestb
• Add "consumer connected" attribute to Xiaomi EU plugs (#2198) @TheJulianJES
• Add "long release event" for IKEA 5-button remotes (#2123) @MatMaul
• Add attribute "motor_mode" to TS130F (#2186) @jasimancas
• add _TZE204_t1blo2bj tuya siren (#2185) @b2un0
• Add MIR-TE100-TY sensor (#2179) @javicalle
• Add missing window_detection_bus to Tuya TRV MoesHY368_Type2 (#2171) @TheJulianJES
• tuya: fix negative values for some devices (#2175) @Shulyaka
• xbee: use zigpy big endian types (#2173) @Shulyaka
• xiaomi: use zigpy big endian types (#2170) @Shulyaka
• Deduplicate Xiaomi plug constructor (#2169) @TheJulianJES
• tuya: use zigpy big endian types (#2168) @Shulyaka
• Set TuyaData.dp_type automatically (#2043) @Shulyaka
• Bump zigpy (#2167) @Shulyaka
• HEIMAN SmokeSensor-N-3.0 support & Update import (#2157) @stickpin
• TRADFRI remote control - add fw support v24.4.5 (#2156) @stickpin
• Refactor IKEA five button remote quirks (#2155) @TheJulianJES
• Add Zonnsmart TRV IDs and comment with names (#2146) @MattWestb
• Deleting _TZE200_2ekuz3dz (#2138) @MattWestb
• Bump isort to 5.12.0 in pre-commit config (#2147) @TheJulianJES
• E1525 Zigbee 3 update (#2137) @MattWestb
• add two manufacturers to TS0501bs (#2136) @jasimancas

0.0.92

This release:

• Fix xiaomi plug (#2134) @dmulcahey
• Added support for Linkind D0003 Motion sensor (#2130) @TheRealSimon42
• Add color support for Tint E14 RGB CCT lights (#2071) @nicufarmache
• One more tuya / Saswell TRV (#2133) @MattWestb
• add support for URC4460BC0-X-R (#2128) @dXcess

0.0.91

This release:

• RDM001: add automation triggers for right switch (#2027) @silviokennecke
• Fix lumi.plug implementation (#2116) @TheJulianJES
• Add TS0601 Soil Moisture Sensor (#2102) @dgaust
• Add generic tuya sensor variant to quirk (#2117) @fdn
• Add lights dimmer support for _TZE200_w4cryh2i (#2126) @aistis-
• Quirk for Develco Motion Sensor Pro (#2122) @mishaaq
• New ts0601_garage quirk (#2107) @javicalle
• Adding hardware updated Ally (#2108) @MattWestb
• add _TZE200_9yapgbuv to TuyaTempHumiditySensorVar03 (#2105) @marktimmerman-dev
• Add support for Tuya TS0046 (#2094) @SkyaTura
• Update for 2.10 firmware updates. (#2110) @kreene1987
• Add initial support for Aqara Thermostat E1 (#2068) @margau
• Add another signature for Aqara EU plugs (#2095) @TheJulianJES
• New Sinopé switch SP2600ZB SP2610ZB support (#2092) @claudegel
• Adding new / old TS0011 and TS0013 version. (#2091) @MattWestb
• Add yet another version of Tuya air sensor. (#2073) @rwalker777
• Add quirk for extended on/off cluster of TS011F _TYZB01_hlla45kx (#2085) @simonaldrich
• Add yet another TS0043 variant (#2074) @fingolfin
• Add missing long-press action to one TS0043 variant (#2082) @fingolfin
• Add support for TS011F by _TZ3000_okaz9tjs (#2069) @mattsaxon
• Add quirk for FeiBit switches to remove LevelControl (#2066) @TheJulianJES
• Add new TS0041 model (#2077) @voroshkov
• Update smoke_alarm.py (#2063) @jackydec
• Add temperature calibration for Tuya TZE200 c88teujp (#2039) @jclsn

0.0.90

This release:

• Fix lumi plug maus01 energy monitoring and configuration (#2057) @dmulcahey
• Adding 5 "found" Sas TRVs (#2052) @MattWestb
• New mcu_connection_status commands (#2055) @javicalle
• Round power values for Aqara EU plugs (#2041) @TheJulianJES
• Merger TS004Fs to EnchantedDevice. (#2046) @MattWestb
• Merger all TS001X device classes to "EnchantedDevice" (#2049) @MattWestb
• Ensure all ZCL command definitions use dictionaries (#2040) @puddly
• DA Support for Styrbar Version 2.4.5 (#2028) @MattWestb
• move_to_level_with_on_off: don't send on_off when already on (#2015) @Shulyaka
• Don't use TuyaData.raw directly (#2026) @Shulyaka
• fix tuya rcbo types (#2021) @Shulyaka
• Added support for RM3500ZB Calypso (#2016) @claudegel
• Add _TZE200_khx7nnka device (#2020) @javicalle
• Update ts0601_switch.py (#2022) @shadmanhabib
• Update ts0601_sensor.py to support new variant (#2013) @Migsi
• Fix ts0601_rcbo.py after #1999 (#2009) @Shulyaka

0.0.89

This release:

• Add support for Tuya Switch _TZ3000_ypgri8yz (#2007) @prockwin
• Support new TS0121 plug (#2002) @javicalle
• Fix Heiman CO_CTPG Carbon Monoxide sensor (#2001) @javicalle
• Tuya TS0601 _TZE200_hkdl5fmv RCBO (#1991) @Shulyaka
• Revert PR #1984 (#1999) @javicalle

0.0.88

This release:

• tuya mcu enhancements (#1989) @Shulyaka
• update (#1988) @weihuan1111
• Add power configuration cluster to ZLinky_TIC (requires firmware v12.0+) (#1962) @pdecat
• Fix TuyaDPType.VALUE payload (#1984) @javicalle
• Update supported Python versions (#1950) @blazewicz
• Add debug traces to handle_set_time_request (#1985) @javicalle
• Add the TS0003 and TS0004 metering devices (#1983) @javicalle
• Add manufacturer support for _TZE200_dq1mfjug for Tuya TS0601 smoke detector ES63-D5Z (#1978) @Leissson
• New TS0012 variation (#1967) @javicalle
• Added manufacturer support ts0601_dimmer.py (#1971) @KislitsaEA
• Add _TZE200_yjjdcqsq Tuya sensor (#1951) @javicalle

0.0.87

This release:

• XBee: Use ___CONSTANT_ATTRIBUTES instead of setting them on init (#1946) @Shulyaka
• Add support for Aqara high precision motion sensor (#1920) @dmulcahey
• Disable schedule on Tuya/Saswell TRV (TS601/_TZE200_c88teujp) (#1816) @blazewicz
• XBee: Update input states on IS command response (#1940) @Shulyaka
• Add support for the Aqara c1 pet feeder (#1936) @dmulcahey
• Add support for GiEX QT06 valve (#1937) @mbo18
• Add _TZE200_znbl8dj5 sensor (#1938) @javicalle
• Add Legrand remote dimmer (#1934) @javicalle
• Add support for ZY-M100 wall mount (#1928) @blakadder
• Xbee: Code refactoring (#1919) @Shulyaka
• Update .pre-commit-config.yaml (#1929) @javicalle
• Adding ROK _TZ3000_csflgqj2 (#1917) @blexis

0.0.86

This release:

• XBee: Use named arguments for cluster commands (#1902) @Shulyaka
• Add support for Inovelli VZM31-SN firmware version 2.08 (#1915) @dmulcahey
• TS0601 - _TZE200_bkkmqmyo - Full Support excluding Alarm and its Configuration (#1877)(#1700) (#1878) @flaktivated
• added support for TS011F _TZ3000_c7nc9w3c (#1903) @1zun4
• Add Zemismart Switch 4x4 TB26-4 support (#1909) @nohans
• Aqara cube fixes (#1893) @travipross
• Add basic support for Moes ZSS-QY-HP (#1895) @blakadder

0.0.85

This release:

• Update Inovelli blue series quirk (#1890) @dmulcahey
• Allow configuring transmit power on TI Z-Stack routers (#1886) @TheJulianJES
• New ts0601_sensor square (#1887) @javicalle
• G2 thermostat support (#1883) @claudegel
• Cleanup of remnant comments (#1882) @javicalle
• Fix node descriptor for aqara T1 weather sensor (#1873) @dmulcahey
• Pass **kwargs to super call in F000LevelControlCluster (#1871) @javicalle
• XBee: Use dict for response event data (#1857) @Shulyaka

0.0.84

This release:

• New Ikea starkvind quirk (#1855) @javicalle
• Add new TS000X metering devices (#1860) @javicalle
• Debug LevelControl kwargs parameter (#1864) @javicalle
• Fix a few command() return objects (#1859) @javicalle
• Fix writing attributes by name in LocalDataCluster (#1858) @Shulyaka
• New remote_e1 quirks file (#1820) @javicalle
• Make CO_V15 battery powered (#1847) @javicalle
• Add support for _TZE200_yi4jtqq1 illuminance sensor. (#1795) @gmsoft-tuxicoman
• Add support to Moes TRV TV02 (#1843) @matlar83