PIO env. PSRAM fix for S3 & S3 with 4M flash

- audioreactive always included for S3 & S2

platformio.ini

@@ -10,7 +10,7 @@
 # ------------------------------------------------------------------------------
 
 # CI/release binaries
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi, esp32_wrover
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi, esp32s3_4M_PSRAM_qspi, esp32_wrover
 
 src_dir  = ./wled00
 data_dir = ./wled00/data
@@ -425,8 +425,9 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  ;-D WLED_DEBUG
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = tools/WLED_ESP32_8MB.csv
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
@@ -445,13 +446,35 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
   -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
+  -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
 board_build.partitions = tools/WLED_ESP32_8MB.csv
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder
 
+[env:esp32s3_4M_PSRAM_qspi]
+;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
+platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
+upload_speed = 921600
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_PSRAM_qspi
+  -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  -DBOARD_HAS_PSRAM
+  -D WLED_WATCHDOG_TIMEOUT=0
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
+board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+monitor_filters = esp32_exception_decoder
+
 [env:lolin_s2_mini]
 platform = ${esp32s2.platform}
 platform_packages = ${esp32s2.platform_packages}
@@ -464,6 +487,7 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MSC_ON_BOOT=0
   -DARDUINO_USB_DFU_ON_BOOT=0
+  -DBOARD_HAS_PSRAM
   -DLOLIN_WIFI_FIX ; seems to work much better with this
   -D WLED_WATCHDOG_TIMEOUT=0
   -D CONFIG_ASYNC_TCP_USE_WDT=0
@@ -474,4 +498,6 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=
   -D HW_PIN_DATASPI=11
   -D HW_PIN_MISOSPI=9
 ;  -D STATUSLED=15
+  ${esp32.AR_build_flags}
 lib_deps = ${esp32s2.lib_deps}
+  ${esp32.AR_lib_deps}