Add directory junction support

config.guess

@@ -867,6 +867,9 @@ EOF
     amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
 	echo x86_64-unknown-cygwin
 	exit ;;
+    amd64:MSYS*:*:* | x86_64:MSYS*:*:*)
+	echo x86_64-unknown-msys
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
 	exit ;;

config.rpath

@@ -109,7 +109,7 @@ hardcode_direct=no
 hardcode_minus_L=no
 
 case "$host_os" in
-  cygwin* | mingw* | pw32*)
+  cygwin* | msys* | mingw* | pw32*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -149,7 +149,7 @@ if test "$with_gnu_ld" = yes; then
         ld_shlibs=no
       fi
       ;;
-    cygwin* | mingw* | pw32*)
+    cygwin* | msys* | mingw* | pw32*)
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
@@ -268,7 +268,7 @@ else
       ;;
     bsdi4*)
       ;;
-    cygwin* | mingw* | pw32*)
+    cygwin* | msys* | mingw* | pw32*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -437,7 +437,7 @@ case "$host_os" in
     ;;
   bsdi4*)
     ;;
-  cygwin* | mingw* | pw32*)
+  cygwin* | msys* | mingw* | pw32*)
     shrext=.dll
     ;;
   darwin* | rhapsody*)

config/dfp.m4

@@ -23,7 +23,8 @@ Valid choices are 'yes', 'bid', 'dpd', and 'no'.]) ;;
     powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux* | s390*-*-linux* | \
     i?86*-*-gnu* | \
     i?86*-*-mingw* | x86_64*-*-mingw* | \
-    i?86*-*-cygwin* | x86_64*-*-cygwin*)
+    i?86*-*-cygwin* | x86_64*-*-cygwin* | \
+    i?86*-*-msys* | x86_64*-*-msys*)
       enable_decimal_float=yes
       ;;
     *)

config/elf.m4

@@ -13,7 +13,7 @@ AC_REQUIRE([AC_CANONICAL_TARGET])
 
 target_elf=no
 case $target in
-  *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
+  *-darwin* | *-aix* | *-cygwin* | *-msys* | *-mingw* | *-aout* | *-*coff* | \
   *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
   alpha*-dec-osf* | *-interix* | hppa[[12]]*-*-hpux*)
     target_elf=no

config/lthostflags.m4

@@ -13,7 +13,7 @@ AC_DEFUN([ACX_LT_HOST_FLAGS], [
 AC_REQUIRE([AC_CANONICAL_SYSTEM])
 
 case $host in
-  *-cygwin* | *-mingw*)
+  *-cygwin* | *-msys* | *-mingw*)
     # 'host' will be top-level target in the case of a target lib,
     # we must compare to with_cross_host to decide if this is a native
     # or cross-compiler and select where to install dlls appropriately.

config/mmap.m4

@@ -42,7 +42,7 @@ else
    # Systems known to be in this category are Windows (all variants),
    # VMS, and Darwin.
    case "$host_os" in
-     *vms* | cygwin* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00)
+     *vms* | cygwin* | msys* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00)
         gcc_cv_func_mmap_dev_zero=no ;;
      *)
         gcc_cv_func_mmap_dev_zero=yes;;
@@ -74,7 +74,7 @@ else
    # above for use of /dev/zero.
    # Systems known to be in this category are Windows, VMS, and SCO Unix.
    case "$host_os" in
-     *vms* | cygwin* | pe | mingw* | sco* | udk* )
+     *vms* | cygwin* | msys* | pe | mingw* | sco* | udk* )
         gcc_cv_func_mmap_anon=no ;;
      *)
         gcc_cv_func_mmap_anon=yes;;

config/picflag.m4

@@ -19,6 +19,8 @@ case "${$2}" in
 	;;
     i[[34567]]86-*-cygwin* | x86_64-*-cygwin*)
 	;;
+    i[[34567]]86-*-msys* | x86_64-*-msys*)
+	;;
     i[[34567]]86-*-mingw* | x86_64-*-mingw*)
 	;;
     i[[34567]]86-*-interix[[3-9]]*)

config/tcl.m4

@@ -33,7 +33,7 @@ AC_DEFUN([SC_PATH_TCLCONFIG], [
 
 	    # First check to see if --with-tcl was specified.
 	    case "${host}" in
-		*-*-cygwin*) platDir="win" ;;
+		*-*-cygwin* | *-*-msys*) platDir="win" ;;
 		*) platDir="unix" ;;
 	    esac
 	    if test x"${with_tclconfig}" != x ; then
@@ -165,7 +165,7 @@ AC_DEFUN([SC_PATH_TKCONFIG], [
 
 	    # then check for a private Tk library
 	    case "${host}" in
-		*-*-cygwin*) platDir="win" ;;
+		*-*-cygwin* | *-*-msys*) platDir="win" ;;
 		*) platDir="unix" ;;
 	    esac
 	    if test x"${ac_cv_c_tkconfig}" = x ; then

configure

@@ -3017,7 +3017,7 @@ esac
 # Configure extra directories which are host specific
 
 case "${host}" in
-  *-cygwin*)
+  *-cygwin* | *-msys*)
     configdirs="$configdirs libtermcap" ;;
 esac
 
@@ -3446,7 +3446,7 @@ if test x$enable_libgo = x; then
 	# PR 46986
 	noconfigdirs="$noconfigdirs target-libgo"
 	;;
-    *-*-cygwin* | *-*-mingw*)
+    *-*-cygwin* | *-*-msys* | *-*-mingw*)
 	noconfigdirs="$noconfigdirs target-libgo"
 	;;
     *-*-aix*)
@@ -3702,7 +3702,7 @@ case "${target}" in
   i[3456789]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
     ;;
-  *-*-cygwin*)
+  *-*-cygwin* | *-*-msys*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
     noconfigdirs="$noconfigdirs target-libgloss"
     # always build newlib if winsup directory is present.
@@ -3837,7 +3837,7 @@ case "${host}" in
   i[3456789]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
-  *-cygwin*)
+  *-cygwin* | *-msys*)
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if cat works as expected" >&5
 $as_echo_n "checking to see if cat works as expected... " >&6; }
@@ -6203,7 +6203,7 @@ fi
 
 target_elf=no
 case $target in
-  *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
+  *-darwin* | *-aix* | *-cygwin* | *-msys* | *-mingw* | *-aout* | *-*coff* | \
   *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
   alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
     target_elf=no
@@ -6220,7 +6220,7 @@ if test $target_elf = yes; then :
 else
   if test x"$default_enable_lto" = x"yes" ; then
     case $target in
-      *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
+      *-apple-darwin9* | *-cygwin* | *-msys* | *-mingw*) ;;
       # On other non-ELF platforms, LTO has yet to be validated.
       *) enable_lto=no ;;
     esac
@@ -6231,7 +6231,7 @@ else
   # warn during gcc/ subconfigure; unless you're bootstrapping with
   # -flto it won't be needed until after installation anyway.
     case $target in
-      *-cygwin* | *-mingw* | *-apple-darwin*) ;;
+      *-cygwin* | *-msys* | *-mingw* | *-apple-darwin*) ;;
       *) if test x"$enable_lto" = x"yes"; then
 	as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
         fi
@@ -6241,7 +6241,7 @@ else
   # Among non-ELF, only Windows platforms support the lto-plugin so far.
   # Build it unless LTO was explicitly disabled.
   case $target in
-    *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
+    *-cygwin* | *-msys* | *-mingw*) build_lto_plugin=$enable_lto ;;
     *) ;;
   esac
 
@@ -7030,7 +7030,7 @@ rm -f conftest*
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
   *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
-  *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
+  *-*-mingw* | *-*-cygwin | *-*-msys ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
 
@@ -7482,7 +7482,7 @@ case " $target_configdirs " in
   case " $target_configargs " in
   *" --with-newlib "*)
    case "$target" in
-    *-cygwin*)
+    *-cygwin* | *-msys*)
       FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
       ;;
    esac

configure.ac

@@ -376,7 +376,7 @@ esac
 # Configure extra directories which are host specific
 
 case "${host}" in
-  *-cygwin*)
+  *-cygwin* | *-msys*)
     configdirs="$configdirs libtermcap" ;;
 esac
 
@@ -779,7 +779,7 @@ if test x$enable_libgo = x; then
 	# PR 46986
 	noconfigdirs="$noconfigdirs target-libgo"
 	;;
-    *-*-cygwin* | *-*-mingw*)
+    *-*-cygwin* | *-*-msys* | *-*-mingw*)
 	noconfigdirs="$noconfigdirs target-libgo"
 	;;
     *-*-aix*)
@@ -1035,7 +1035,7 @@ case "${target}" in
   i[[3456789]]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
     ;;
-  *-*-cygwin*)
+  *-*-cygwin* | *-*-msys*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
     noconfigdirs="$noconfigdirs target-libgloss"
     # always build newlib if winsup directory is present.
@@ -1170,7 +1170,7 @@ case "${host}" in
   i[[3456789]]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
-  *-cygwin*)
+  *-cygwin* | *-msys*)
     ACX_CHECK_CYGWIN_CAT_WORKS
     host_makefile_frag="config/mh-cygwin"
     ;;
@@ -1702,7 +1702,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
   build_lto_plugin=yes
 ],[if test x"$default_enable_lto" = x"yes" ; then
     case $target in
-      *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
+      *-apple-darwin9* | *-cygwin* | *-msys* | *-mingw*) ;;
       # On other non-ELF platforms, LTO has yet to be validated.
       *) enable_lto=no ;;
     esac
@@ -1713,7 +1713,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
   # warn during gcc/ subconfigure; unless you're bootstrapping with
   # -flto it won't be needed until after installation anyway.
     case $target in
-      *-cygwin* | *-mingw* | *-apple-darwin*) ;;
+      *-cygwin* | *-msys* | *-mingw* | *-apple-darwin*) ;;
       *) if test x"$enable_lto" = x"yes"; then
 	AC_MSG_ERROR([LTO support is not enabled for this target.])
         fi
@@ -1723,7 +1723,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
   # Among non-ELF, only Windows platforms support the lto-plugin so far.
   # Build it unless LTO was explicitly disabled.
   case $target in
-    *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
+    *-cygwin* | *-msys* | *-mingw*) build_lto_plugin=$enable_lto ;;
     *) ;;
   esac
 ])
@@ -2459,7 +2459,7 @@ rm -f conftest*
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
   *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
-  *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
+  *-*-mingw* | *-*-cygwin | *-*-msys ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
 
@@ -2910,7 +2910,7 @@ case " $target_configdirs " in
   case " $target_configargs " in
   *" --with-newlib "*)
    case "$target" in
-    *-cygwin*)
+    *-cygwin* | *-msys*)
       FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
       ;;
    esac