Initial Code

.github/workflows/build.yml

@@ -1,6 +1,6 @@
 name: Build
 env:
-  DEVICE_NAME: plt-1 # TODO: Rename
+  DEVICE_NAME: pump-1 # TODO: Rename
   RELEASE_URL: ${{ github.server_url }}/${{ github.repository }}/releases/latest
 
 on:

.github/workflows/ci.yml

@@ -9,9 +9,9 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        file: # TODO: Rename
-          - Integrations/ESPHome/PLT-1.yaml
-          - Integrations/ESPHome/PLT-1_BLE.yaml
+        file:
+          - Integrations/ESPHome/PUMP-1.yaml
+          - Integrations/ESPHome/PUMP-1_BLE.yaml
     steps:
       - name: Checkout source code
         uses: actions/[email protected]

Integrations/ESPHome/Core.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  name: apollo-plt-1 # TODO: Rename
+  name: apollo-pump-1
   version: "24.8.7.2"
   device_description: ${name} made by Apollo Automation - version ${version}.
 
@@ -9,6 +9,13 @@ esp32:
     type: esp-idf
 
 api:
+  services:
+    - service: play_buzzer
+      variables:
+        song_str: string
+      then:
+        - rtttl.play:
+            rtttl: !lambda 'return song_str;'
 
 globals:
   - id: cycleCounter
@@ -23,4 +30,139 @@ globals:
 captive_portal:
 
 web_server:
-  port: 80
+  port: 80
+
+# Buzzer
+output:
+  - platform: ledc
+    pin: GPIO10
+    id: buzzer
+rtttl:
+ output: buzzer
+
+switch:
+  - platform: factory_reset
+    id: factory_reset_switch
+    internal: true
+  - platform: gpio
+    pin: GPIO7
+    name: "Pump Control"
+    id: pump_control
+
+binary_sensor:
+  - platform: status
+    name: Online
+    id: ink_ha_connected
+  - platform: gpio
+    pin: 
+      number: GPIO9
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    id: reset_button
+    on_press:
+      then:
+        - lambda: |-
+            id(button_press_timestamp) = millis();    
+    on_release:
+      then:
+        - lambda: |-
+            if (millis() - id(button_press_timestamp) >= 10000) {
+              // Remove Wifi
+              id(factory_reset_switch).turn_on();
+            }
+            else {
+              // StatusCheck
+              id(statusCheck).execute();
+            }
+  - platform: gpio
+    name: Water level exists
+    id: water_level_exists
+    icon: mdi:water
+    pin: 
+      number: GPIO4
+      mode:
+        input: true
+        pulldown: True
+    filters:
+      - invert:
+
+
+
+sensor:
+  - platform: internal_temperature
+    name: "ESP Temperature"
+    id: sys_esp_temperature
+
+  - platform: uptime
+    name: Uptime
+    id: sys_uptime
+    update_interval: 60s
+
+  - platform: wifi_signal
+    name: RSSI
+    id: wifi_signal_db
+    update_interval: 60s
+    entity_category: "diagnostic"
+
+light:
+  - platform: esp32_rmt_led_strip
+    id: rgb_light
+    name: "RGB Light"
+    pin: GPIO3
+    rmt_channel: 0
+    default_transition_length: 0s
+    chipset: WS2812
+    num_leds: 1
+    rgb_order: grb
+    effects:
+      - pulse:
+          name: "Slow Pulse"
+          transition_length: 1000ms
+          update_interval: 1000ms
+          min_brightness: 0%
+          max_brightness: 100%
+      - pulse:
+          name: "Fast Pulse"
+          transition_length: 100ms
+          update_interval: 100ms
+          min_brightness: 50%
+          max_brightness: 100%
+
+script:
+  - id: statusCheck
+    then:
+      - if:
+          condition:
+            - lambda: 'return id(ink_ha_connected).state;'
+          then:
+            - logger.log: "Apollo Automation: Connected To HA"
+            - light.turn_on: 
+                id: rgb_light
+                brightness: 100%
+                red: 0%
+                green: 0%
+                blue: 100%
+          else:
+            - if:
+                condition:
+                  - wifi.connected
+                then:
+                  - logger.log: "Apollo Automation: Connected To Wifi"
+                  - light.turn_on: 
+                      id: rgb_light
+                      brightness: 100%
+                      red: 0%
+                      green: 100%
+                      blue: 0%
+                else:
+                  - logger.log: "Apollo Automation: Not Connected To Wifi"
+                  - light.turn_on: 
+                      id: rgb_light
+                      brightness: 100%
+                      red: 100%
+                      green: 100%
+                      blue: 0%
+      - delay: 5s
+      - light.turn_off: rgb_light

Integrations/ESPHome/AIR-1.yaml → Integrations/ESPHome/PUMP-1.yaml

@@ -1,20 +1,20 @@
 esphome:
   name: "${name}"
-  friendly_name: Apollo AIR-1 # TODO: Rename
-  comment: Apollo AIR-1 # TODO: Rename
+  friendly_name: Apollo PUMP-1
+  comment: Apollo PUMP-1
   name_add_mac_suffix: true
   platformio_options:
     board_build.flash_mode: dio
 
   project:
-    name: "ApolloAutomation.AIR-1" # TODO: Rename
+    name: "ApolloAutomation.PUMP-1"
     version: "${version}"
 
   min_version: 2023.11.1
 
 dashboard_import:
-  package_import_url: github://ApolloAutomation/AIR-1/Integrations/ESPHome/AIR-1.yaml
-  import_full_config: false # TODO: Rename
+  package_import_url: github://ApolloAutomation/PUMP-1/Integrations/ESPHome/PUMP-1.yaml
+  import_full_config: false
 
 improv_serial:
 
@@ -36,7 +36,7 @@ update:
   - platform: http_request
     id: firmware_update
     name: Firmware Update
-    source: https://apolloautomation.github.io/PLT-1/artifact/manifest.json # TODO: Rename
+    source: https://apolloautomation.github.io/PUMP-1/artifact/manifest.json
 
 wifi:
   on_connect:
@@ -45,9 +45,9 @@ wifi:
   on_disconnect:
     - ble.enable:
   ap:
-    ssid: "Apollo PLT1 Hotspot" # TODO: Rename
+    ssid: "Apollo PUMP1 Hotspot"
 
 logger:
 
 packages:
-  core: !include Core.yaml
+  core: !include Core.yaml

README.md

@@ -1,9 +1,9 @@
-# Apollo AIR-1
+# Apollo PUMP-1
 
-![Pen no dust](https://github.com/ApolloAutomation/AIR-1/assets/24777085/183af36d-4611-4cb3-af1e-43b84d4d201a)
+![Pen no dust](https://github.com/ApolloAutomation/PUMP-1/assets/24777085/183af36d-4611-4cb3-af1e-43b84d4d201a)
 
 
-Key Features of the AIR-1 Sensor:
+Key Features of the PUMP-1 Sensor:
 
 MiCS-4514 Below have individual gas % readout: CO, C2H5OH (Alcohol), H2, NO2, and NH3
 
@@ -15,9 +15,9 @@ DPS310: Barometric air pressure and temperature.
 
 Dimensions & Design: 
 
-The AIR-1 measures just 61mm x 61mm x 30mm, and we have focused on efficient heat management within this small package to maintain sensor accuracy. This includes a thoughtful PCB layout and case design, incorporating ventilation and strategic component placement. 
+The PUMP-1 measures just 61mm x 61mm x 30mm, and we have focused on efficient heat management within this small package to maintain sensor accuracy. This includes a thoughtful PCB layout and case design, incorporating ventilation and strategic component placement. 
 
 Links: \
 Discord (Support/feedback/discussion/future products): [https://discord.gg/8PpS4yUaUh](https://discord.gg/mMNgQPyF94) \
-Shop: [https://apolloautomation.com](https://apolloautomation.com/products/air-1)https://apolloautomation.com/products/air-1 \
+Shop: [https://apolloautomation.com](https://apolloautomation.com/products/pump-1)https://apolloautomation.com/products/pump-1 \
 Wiki: [https://wiki.apolloautomation.com](https://wiki.apolloautomation.com/)https://wiki.apolloautomation.com/ 

index.html

@@ -2,10 +2,10 @@
 <html>
   <head>
     <meta charset="utf-8" />
-    <title>Apollo AIR-1 Installer</title>
+    <title>Apollo PUMP-1 Installer</title>
     <meta
       name="description"
-      content="Easily allow users to install Apollo AIR-1 firmware on the web."
+      content="Easily allow users to install Apollo PUMP-1 firmware on the web."
     />
     <meta name="viewport" content="width=device-width" />
     <meta name="color-scheme" content="dark light" />
@@ -79,16 +79,16 @@
   </head>
   <body>
     <div class="content">
-      <h1>Apollo AIR-1 Installer</h1>
+      <h1>Apollo PUMP-1 Installer</h1>
 
       <p class="button-row" align="center">
         <esp-web-install-button manifest="./Integrations/ESPHome/manifest.json">
         </esp-web-install-button>
       </p>
 
       <div class="footer">
-        <a href="https://github.com/ApolloAutomation/AIR-1"
-          >Apollo AIR-1</a
+        <a href="https://github.com/ApolloAutomation/PUMP-1"
+          >Apollo PUMP-1</a
         > &mdash;
         Installer powered by <a href="https://esphome.github.io/esp-web-tools/">ESP Web Tools</a>.
     </div>