Tasmota

Control devices running Tasmota firmware using Homey (through MQTT).

Introduction

This app supports devices running the (unofficial) Sonoff-Tasmota firmware. However, installing an alternative firmware requires you to open up the device (voiding its warranty), soldering connectors to it, and flashing the firmware using a USB-to-serial dongle. It also requires an MQTT broker to be running; you can use the Homey MQTT Broker app for this. Alternatively, the convert-tuya solution may (if you are lucky) help you to install the Sonoff-Tasmota firmware without soldering.

I hereby deny all responsabilties in the usage of above information or the application hereby provided for "free" and under your own responsability.

Tested devices

This driver has been tested with the following devices:

• Sonoff 4CH Rev2 (multiswitch)
• Teepao Smart Touch Switch (shutter)

Issues

Please report issues here: https://github.com/Baldhor/tasmota

Icon Attribution

The initial application Sonoff was created by Robert Klep. He also designed the generic driver for tasmota devices (but didn't finished it :) ). => I removed all contents related to "original" Sonoff devices, all contents related to "specific" tasmota devices, and focused only on the "generic" driver for tasmota (see tested devices).

How to install

This app is not yet in Homey appstore, to install it you need to follow thiese steps:

1. Install Node.js

Download Node.js from the Node.js website and install it on your computer.

2. Install athom-cli

Open a command line, and install the athom-cli program by running the following command:

$ npm install -g homey

3. Setup your Homey credentials

$ homey login

4. Install git

Download a git client (for example: https://git-scm.com/) and install it.

5. Clone the repository

$ git clone https://github.com/Baldhor/tasmota-for-homey.git

6. Go in the newly created folder

$ cd tasmota-for-homey

7. Install the application on your Homey

$ homey app install

8. Enjoy

And don't hesite to report any issue or even pull request/enhancement

Changelog

• 1.0.0 (2019-11-09):
  • Initial beta release
  • Support switch, multiswitch (up to 4) and shutter
  • Tested with : Sonoff 4CH Rev2 (multiswitch) and Teepao Smart Touch Switch (shutter)