Skip to content

Cascoda/knx_iot_example

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

52 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

KNX IoT Example

Introduction

This repository hosts our latest version of the KNX IoT Development Board Demos, pre-built and ready to flash.

This repository also hosts source code for example applications, which can be built using provided scripts.

KNX IoT Development Board Demos

The following KNX IoT Development Board Demos can be found in the releases page. Click here for the latest release.

Application Description Click/Hardware Battery-power enabled
CARGB Colour Actuator RGB LED Driver 3 Click N
RELAY Relay Actuator RELAY Click N
RTS Room Temperature Sensor Thermo 3 Click Y

In the zip file contained in the release, you will find a folder which contains the following:

  • One ETS project to configure and interact with all three of the demos. The password for this file is the letter "a".
  • A folder for each of the demos, containing:
    • A PDF manual
    • An application binary
    • A QR code for Thread and KNX commissioning (note: this can also be found in the PDF manual)

Example Applications with Source

Application Description Functions Click/Hardware Bus Virtual device
Example Code of the Example LSAB LSSB - - Y
Battleship Code of battleship (the game) Eink - - N

See the video of battleship being configured by ETS and being played.

ETS Test projects for those examples can be found in the folder input/[Application]/MT

EINK display info

https://www.waveshare.com/1.54inch-e-paper-module.htm

  • Description: 200x200, 1.54inch E-Ink display module
  • SKU: 12955
  • Part Number: 1.54inch e-Paper Module
  • Brand: Waveshare