Introduction

A CircuitPython helper for calculating an Ohm's Law formula result from two input parameters.

Dependencies

This driver depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle or individual libraries can be installed using circup.

Installing to a Connected CircuitPython Device with Circup

Make sure that you have circup installed in your Python environment. Install it with the following command if necessary:

pip3 install circup

With circup installed and your CircuitPython device connected use the following command to install:

circup install cedargrove_ohmslaw

Or the following command to update an existing version:

circup update

Usage Example

>>> from cedargrove_ohmslaw import ohms_law
>>> ohms_law(ohms=1000, volts=3.3)
3.3  # current in milliamperes
>>> ohms_law(volts=5, milliamperes=100)
50.0  # resistance in ohms
>>> ohms_law(milliamperes=5, ohms=2000)
10.0  # voltage in volts

Documentation

API documentation for this library can be found here.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.