Merge pull request #192 from printfinn/Add-8MP

Minor iMX8MP fixes.
Chipsee · Oct 20, 2023 · df7f32d · df7f32d
2 parents ffd6493 + ca155f4
commit df7f32d
Show file tree

Hide file tree

Showing 6 changed files with 4 additions and 4 deletions.
diff --git a/docs/source/Media/ARM/A53/CS10600-IMX8MP-070P/CS10600-IMX8MP-070P-Power.jpg b/docs/source/Media/ARM/A53/CS10600-IMX8MP-070P/CS10600-IMX8MP-070P-Power.jpg
diff --git a/docs/source/Media/ARM/A53/CS10600-IMX8MP-070P/CS10600-IMX8MP-070P-Side1.jpg b/docs/source/Media/ARM/A53/CS10600-IMX8MP-070P/CS10600-IMX8MP-070P-Side1.jpg
diff --git a/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/CS10600-IMX8MP-070P.rst b/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/CS10600-IMX8MP-070P.rst
@@ -34,7 +34,7 @@
 
 .. |USB| replace:: 1 x USB 2.0 HOST, 1 x USB 3.0 HOST, 1 x USB Type-C
 
-.. |USB_3_USB_C_Note| replace:: USB3.0 port and USB-C port shares one node and cannot be used together. In Linux USB3.0 HOST is enabled by default; in Android USB-C OTG is enabled by default. You can change this config by software in the operating systems, e.g.: disable USB3.0 HOST then enable USB-C OTG in Linux, or vice versa in Android.
+.. |USB_3_USB_C_Note| replace:: USB3.0 port and USB-C port share one node and cannot be used together. In Linux USB3.0 HOST is enabled by default; in Android USB-C OTG is enabled by default. You can change this config by software in the operating systems, e.g.: disable USB3.0 HOST then enable USB-C OTG in Linux, or vice versa in Android.
 
 .. |LAN| replace:: 2 x RJ45, GbE, including **1 x optional** Power over Ethernet (PoE) port
 

diff --git a/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/CS10600-IMX8MP-070P/gpio b/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/CS10600-IMX8MP-070P/gpio
@@ -4,7 +4,7 @@ GPIO Port
 |Product| has a 10 Pin 3.81mm **GPIO Connector**, as shown in the figure below.
 The table below gives details about the definition of every Pin.
 
-The VDD_ISO is a isolated power *input* pin, you should attach a 5~24V DC power input to this pin. 
+The VDD_ISO is an isolated power *input* pin, you should attach a 5~24V DC power input to this pin. 
 
 It is also possible to use the onboard 5V power supply. The 5V on board power supply can be re-routed to the *Isolated Power Input* pin by populating R236 and R239 PCB footprints with 0Ω resistors **in the factory**. In this case you don't need to provide a DC power supply unit to use the GPIO, and the *VDD_ISO* input will become a *5V OUTPUT* powered by the on board 5V.
 

diff --git a/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/connectivity b/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/connectivity
@@ -1,7 +1,7 @@
 Connectivity
 ============
 
-There are many connectivity options available on the |product| industrial PC. It has |USB| (USB3.0 and USB-C shares one node); |LAN|; up to 6 x UART terminals (RS232/RS485), up to 2 x CAN.
+There are many connectivity options available on the |product| industrial PC. It has |USB| (USB3.0 and USB-C share one node); |LAN|; up to 6 x UART terminals (RS232/RS485), up to 2 x CAN.
 
 RS232/RS485/CAN
 ---------------

diff --git a/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/opt_features b/docs/source/PCs/ARM/iMX8MP/Manuals/Hardware/Resources/opt_features
@@ -1,7 +1,7 @@
 Optional Features
 -----------------
 
-|Product| does not include 4G/LTE module by default. The module is optional and can be selected at the Chipsee store during the ordering process.
+|Product| does not include the 4G/LTE module by default. The module is optional and can be selected at the Chipsee store during the ordering process.
 
 .. warning::