Activates a relay on detecting motion.
You may need following components to get the expected Results
- A raspberry pi 2 or 3 model B (Raspberry pi 3 model 3 has been used in my case)
- A compatible camera module (CAMERA MODULE V2)
- A power Adapter with 2.0A - 2.5A (RASPBERRY PI UNIVERSAL POWER SUPPLY)
- A micro SD card (16Gb -32GB recommended)
- Any compatible Raspbian OS can be used.
- Update the OS to latest
sudo apt-get update - Upgrade the OS
sudo apt-get upgrade - Update the Raspberry Pi firmware
sudo rpi-update - Should install OpenCV
sudo apt-get install libopencv - Should Install Python
- imutils
pip install imutils - RPi.GPIO
pip install RPi.GPIO
If you need to update openCV to latest version install following dependencies
sudo apt-get install build-essential checkinstall cmake pkg-config yasm
sudo apt-get install libtiff4-dev libjpeg-dev libjasper-dev
sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev
sudo apt-get install python-dev python-numpy
sudo apt-get install libtbb-dev
sudo apt-get install libqt4-dev libgtk2.0-dev
python pi_surveillance.py --conf conf.json