Skip to content

Library to control EVE2, EVE3 and EVE4 screens on the Arduino IDE with teensy 4x/STM32F1-F2-F4-F7

License

Notifications You must be signed in to change notification settings

FT81xMania/GDSTx

Repository files navigation

History

In memory of my brother lightcalamar.

"We are an enthusiastic team of screens based on FTDI chip. We like programming and share our advances. We have reached this goal, our only interest is to give the opportunity to operate this library to multiple platforms of MCU's in the market. Wait for you to enjoy the codes, of our, your time. Two friends, in Mexico and another in Spain, the water or the puddle does not scare us ... Last month of May, a member of the Team, we left. We move on. Without any interest, we publish this library altruistically."

  1. Library based on the library created by James Bowman
  2. Library based on lightcalamar GD23STM32_F103x > programmed and modified by [@TFTLCDCyg]
  3. Library based on STM32_GD2 user @nopnop2002 this link
  4. Configured to work with the most recient version of SdFat library

Teensy support

  • Teensy 4.1
  • Teensy 4
  • Teensy 3.5 and Teensy 3.6

FT81xMania

NHD 4.3" FT813 + Teensy 4.1

FT81xMania

Wiring: 20 pin header TFT to MCU

STM32F support

  • STM32F103x (F103C8, M3-DEMO)
  • STM32F407x (BLACK-F407VG, M4-DEMO)
  • BLACK STM32F411
  • STM32F429 (Discovery board)
  • Core7XXI (STM32F746)
  • Nucleo STM32F767

Software requirement

For Windows

  1. Unzip library copy and paste path of IDE arduino-1.8.9\libraries\ or Documents\Arduino\libraries\
  2. Install Arduino Zero or Arduino Sam from the board manager for the arm-none-eabi-gcc compiler
  3. Download the GNU ARM Embedded Toolchain. Recommended use GCC ver 5.4.1-2016q2 (or superior),Change compiler.path in platform.txt to point to that you downloaded.

Extra libraries

  • AT24C32 library to calibrate the FT81x screens in STM32Fx we need an external EEPROM.
  • Library SdFat for multimedia support

Tips

  • These screens have a problem, being the length of the SPI BUS cables. The purpose is to be very short, between 7 and 10 mm. Also a tip is to use on this same SPI BUS some pull-up resistors.

Where do I find information about programming EVE2 of FTDI?

Useful links

Acknowledgments

  • James Bowman for your support and constant teachings and great programming effort
  • Infinite thanks to @nopnop2002 STM32_GD2 Library on GitHub
  • Hat tip to anyone who's code was used
  • Inspiration
  • More time frustation...
  • Etc...
  • Our friends of Matrix Orbital Henry and Daniel

Test video file: http://www.mediafire.com/file/1fo25jc3605hmm9/oficial.avi/file

#include <GDSTx.h>

void setup(){

GD.begin();

}

void loop(){

MoviePlayer mp;

mp.begin("oficial.avi");

mp.play();

}

About

Library to control EVE2, EVE3 and EVE4 screens on the Arduino IDE with teensy 4x/STM32F1-F2-F4-F7

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published