Final

FredM67 · Apr 30, 2023 · 7989cbb · 7989cbb
1 parent 3963940
commit 7989cbb
Show file tree

Hide file tree

Showing 3 changed files with 6 additions and 7 deletions.
diff --git a/Mk2_3phase_RFdatalog_temp/calibration.h b/Mk2_3phase_RFdatalog_temp/calibration.h
@@ -31,7 +31,7 @@
 // powerCal is the RECIPROCAL of the power conversion rate. A good value
 // to start with is therefore 1/20 = 0.05 (Watts per ADC-step squared)
 //
-inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.05000F, 0.05000F, 0.05000F };
+inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.04565F, 0.04592F, 0.04505F };
 //
 // f_phaseCal is used to alter the phase of the voltage waveform relative to the current waveform.
 // The algorithm interpolates between the most recent pair of voltage samples according to the value of f_phaseCal.

diff --git a/Mk2_3phase_RFdatalog_temp/config.h b/Mk2_3phase_RFdatalog_temp/config.h
@@ -31,7 +31,7 @@
 // constants which must be set individually for each system
 //
 inline constexpr uint8_t NO_OF_PHASES{ 3 };    /**< number of phases of the main supply. */
-inline constexpr uint8_t NO_OF_DUMPLOADS{ 3 }; /**< number of dump loads connected to the diverter */
+inline constexpr uint8_t NO_OF_DUMPLOADS{ 2 }; /**< number of dump loads connected to the diverter */
 
 #ifdef EMONESP
 inline constexpr bool EMONESP_CONTROL{ true };
@@ -66,8 +66,8 @@ inline constexpr bool DUAL_TARIFF{ false };          /**< set it to 'true' if th
 // D12 is MISO
 // D13 is SCK
 
-inline constexpr uint8_t physicalLoadPin[NO_OF_DUMPLOADS]{ 5, 6, 7 }; /**< for 3-phase PCB, Load #1/#2/#3 (Rev 2 PCB) */
-inline uint8_t loadPrioritiesAndState[NO_OF_DUMPLOADS]{ 0, 1, 2 };    /**< load priorities and states at startup */
+inline constexpr uint8_t physicalLoadPin[NO_OF_DUMPLOADS]{ 5, 6 }; /**< for 3-phase PCB, Load #1/#2/#3 (Rev 2 PCB) */
+inline uint8_t loadPrioritiesAndState[NO_OF_DUMPLOADS]{ 0, 1 };    /**< load priorities and states at startup */
 
 inline constexpr uint8_t dualTariffPin{ 0xff }; /**< for 3-phase PCB, off-peak trigger */
 inline constexpr uint8_t diversionPin{ 0xff };  /**< if LOW, set diversion on standby */
@@ -79,8 +79,7 @@ inline constexpr uint8_t tempSensorPin{ 0xff }; /**< for 3-phase PCB, sensor pin
 
 inline constexpr uint8_t ul_OFF_PEAK_DURATION{ 8 };                          /**< Duration of the off-peak period in hours */
 inline constexpr pairForceLoad rg_ForceLoad[NO_OF_DUMPLOADS]{ { -3, 2 },     /**< force config for load #1 ONLY for dual tariff */
-                                                              { -3, 120 },   /**< force config for load #2 ONLY for dual tariff */
-                                                              { -180, 2 } }; /**< force config for load #3 ONLY for dual tariff */
+                                                              { -180, 2 } }; /**< force config for load #2 ONLY for dual tariff */
 
 inline constexpr int16_t iTemperatureThreshold{ 100 }; /**< the temperature threshold to stop overriding in °C */
 

diff --git a/cal_CTx_v_meter/main.cpp b/cal_CTx_v_meter/main.cpp
@@ -122,7 +122,7 @@ Polarities polarityConfirmedOfLastSampleV[NO_OF_PHASES]; /**< for zero-crossing
 // powerCal is the RECIPR0CAL of the power conversion rate. A good value
 // to start with is therefore 1/20 = 0.05 (Watts per ADC-step squared)
 //
-inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.05000F, 0.05000F, 0.05000F };
+inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.04565F, 0.04592F, 0.04505F };
 
 // f_phaseCal is used to alter the phase of the voltage waveform relative to the
 // current waveform. The algorithm interpolates between the most recent pair