ELF note types for LLPC cache hash #2

jaebaek · 2021-01-21T22:05:44Z

This commit adds two new note types: NT_AMD_LLPC_CACHE_HASH and
NT_AMD_LLPC_VERSION. They will be used for note entries for LLPC cache
hash and LLPC version. This commit updates ELFDumper to show two note
types clearly.

This pass attempts to merge s_buffer_load_dword instructions into larger sizes. Constraints are that the resource descriptor, glc flag and size are all the same for contiguous load instructions. TODO: it should be possible to add different instructions to this as well such as s_buffer_store and the vector variants buffer_load/buffer_store V2: Fixes to sbuff-merge test V3: Fixed smrd test for smem merging V4: Fixed for gfx10 changes Change-Id: Ie98107ad3b27b3c8c2da7afc3d129336f924895a

Summary: Added intrinsics for the instructions: - buffer_load_ubyte - buffer_load_ushort - buffer_store_byte - buffer_store_short Added test cases to existing buffer load/store tests. Now that upstream supports byte/short overloads of the normal load/store intrinsics, this change is only needed until LLPC stops using the intrinsics added here. Change-Id: I1b8a0910c508c9520a84b74a14d0aea8293cef38

Vulkan exposed an issue with this for a case with v_mad_mixlo_f16 where the upper 16 bits were not cleared. Modifying this to clear the bits instead of just copying fixed the problem. V2: Fixed up "Fix issue for zext of f16 to i32" V3: Fixed fcanonicalize-elimination test Change-Id: I6128deaf8ebc3489fdd3e0caead837410bb47160

Readlane should have a uniform index - but in some cases it can be non-uniform. The original implementation of readlane defaulted to using a readfirstlane of the vgpr index on the assumption that the index would be uniform across all lanes. However, there are some cases where we might want a readlane like operation that is lowered to a waterfall that performs a readlane for each distinct index value across lanes. Essentially we form a loop that uses readfirstlane to get the first enabled lane's index - enable all lanes with the same index, perform a readlane and put the result into the vgpr result register, then disable those lanes and repeat. The pathological case will form a loop of 64 - but in most cases it will be fewer. In the case where the index IS uniform across all lanes, it will loop once, which is slightly more expensive than the original code, but not a lot more. V2: Initialize accumulator register in waterfall code V3: Fixed for gfx10 changes Change-Id: Ic52dfb14b053db7713b61c85e8ac766991aecdb8

Even though writelane doesn't have the same constraints as other valu instructions it still can't violate the >1 SGPR operand constraint Due to later register propagation (e.g. fixing up vgpr operands via readfirstlane) changing writelane to only have a single SGPR is tricky. This implementation puts a new check after SIFixSGPRCopies that prevents multiple SGPRs being used in any writelane instructions. The algorithm used is to check for trivial copy prop of constants into one of the SGPR operands and perform that if possible. If this isn't possible put an explicit copy of Src1 SGPR into M0 and use that instead (this is allowable for writelane as the constraint is for SGPR read-port and not constant-bus access). V2: Fix-up cases where writelane has 2 SGPR operands - bug fixes Update to previous commit to fix an issue where immediates are tested for copy propagation but aren't suitable as inline constants. The old method caused issues that resulted in seg faults in later cse phases. Even though writelane doesn't have the same constraints as other valu instructions it still can't violate the >1 SGPR operand constraint Due to later register propagation (e.g. fixing up vgpr operands via readfirstlane) changing writelane to only have a single SGPR is tricky. This implementation puts a new check after SIFixSGPRCopies that prevents multiple SGPRs being used in any writelane instructions. The algorithm used is to check for trivial copy prop of constants into one of the SGPR operands and perform that if possible. If this isn't possible put an explicit copy of Src1 SGPR into M0 and use that instead (this is allowable for writelane as the constraint is for SGPR read-port and not constant-bus access). Change-Id: Ic3045df22db738ca6572af00138520fd28563990

Implements 3 new intrinsics for implementing waterfall code for regions of code. Waterfall is implemented as a loop that iterates over an index of values for active lanes. For each iteration an index is picked (the first active lane) and all lanes with the same index are left active (the rest are disabled). The body of the code is then executed and the result accumulated into a result vector register. The active lane is then disabled and the next index chosen for the next iteration. The worst case for waterfall is one iteration per lane - but it is usually far less than this. The implementation uses 3 intrinsics to mark a region: - llvm.amdgcn.waterfall.begin - llvm.amdgcn.waterfall.readfirstlane - llvm.amdgcn.waterfall.end The group must contain one begin and at least one readfirstlane and end intrinsic - if the readfirstlane uses the begin index, then there will only be a single readfirstlane and not 2. The readfirstlane and end intrinsics are not limited to single dword values. The waterfall loop will enclose all instructions from the begin to the final end intrinsic. See the test case for specific examples of use. V2: [AMDGPU] Updates to waterfall intrinsic support Some fixes for waterfall support. 1. Intrinsics are better defined so enforce type correctness 2. Creation of the waterfall loop requires removing kill flag for operands moved into the loop, this can otherwise cause an assert during verification 3. Fixed issue causing a tablegen failure due to float return type being used for a scalar return value (incorrectly). The matching for intrinsic to pseudo instruction now uses 2 template parameter types to disambiguate when using float src types. 4. Ensure that any analyses are invalidated due to insertion of new basic blocks. This should have been the default anyway. 5. Updated test in light of these changes. These are good exemplars for implementors to check against. V3: [AMDGCN] Fixed waterfall intrinsic groups for multiple groups per BB For cases with more than one waterfall group per basic block, the implementation would go wrong after creating the first waterfall loop (incorrectly tracking current BB). Also added a test case. V4: [AMDGCN] Waterfall enhancements Extra waterfall test for multiple readfirstlane intrinsics. Make sure that the waterfall intrinsic clauses support multiple readfirstlane intrinsics. Extended support for begin to allow multi-dword indices for the waterfall loop. This allows the use of multiple indexes (and multiple non-uniform values) in the same waterfall loop by combining the individual indices into a single multi-dword index. This has the same worst-case of 64 iterations (wave size) as before. Added a new test case to demonstrate using multi-dword indices. Added support for i16/f16 Changed the implementation to prevent CSE from merging clauses (by tagging the intrinsics as having side effects and enhancing uniform detection to work in this case as well). Left in some support added to partially support EarlyCSE merging as it is still valid, but probably won't be triggered much now merging is disabled. Added support for a last.use intrinsic. See the test for an example of this. This works in the same way as the end intrinsic, but you tag a last_use instead (so it includes the next use in the waterfall loop). More than one use is acceptable as long as it is in the same BB. All instructions up to the last last.use will be included in the waterfall loop. An important rule for waterfall clauses (that isn't detected if violated) is that you can't have something inside the loop that is dependent on an end intrinsic in the loop - this restriction is logically consistent - you have to use two loops instead. V5: [AMDGPU] Handle unexpected uniform inputs in waterfall intrinsics Waterfall intrinsic input operands can sometimes be uniform. The waterfall handling pass should deal with this gracefully, even though this could be sub-optimal. This is an initial fix for a problem observed in a game. Subsequent better fix being worked on which should produce optimal code (by removing redundant waterfall loops entirely if all the elements turn out to be uniform anyway). V6: [AMDGPU] Improved handling of uniform waterfalls This builds on a previous fix for uniform values being specified in waterfall loop intrinsic groups. Previous fix would just remove any waterfall.readfirstlane intrinsics if the input was uniform. This fix improves on this by spotting when ALL waterfall.readfirstlanes are uniform and removing the waterfall loop entirely. The tests have been extended to test this mode. The update also handles the case where not all waterfall.readfirstlanes are removed. This is also covered in the associated tests. V7: [AMDGCN] Re-order waterfall and wholequadmode passes Running WholeQuadMode pass after waterfall can have bad consequences. Changing the order improves the outcome - but there may still be problems in some unusual cases. For the known uses of the waterfall intrinsics this change will work for now. V8: waterfall test fixup Change-Id: I95b4391b8c0570bd399d70ed64af355d13ef4c84

Summary: The test shows a case where a full use is not in a subrange because the subreg is undefined at the use point, but, after a coalesce, the subrange incorrectly still does not include the use even though the subreg is now defined at that point. The incorrect live range causes a "subrange join unreachable" assert on a later coalesce. This commit ensures that a subrange is extended to all uses that can be reached from a definition. V2: Completely different fix, instead of working round the problem in the later coalesce that actually asserted. V5: Fixed to not extend liveness to an undef use. Spun second test out into its own D51257 as it is a completely different problem with the same "subrange join unreachable" symptom. V6: Ignore debug uses. V7: Set up undefs correctly, to avoid generating invalid subranges. Differential Revision: https://reviews.llvm.org/D49097 Change-Id: I172cfe16d360690e921ebe606d3e90dd1cdd1b71

eliminateUndefCopy was incorrectly eliminating a copy that was only a partial write of the target. In the test case, the resulting incorrect live range caused a subrange join unreachable later. The test case does not fail for me until I have D49097. Differential Revision: https://reviews.llvm.org/D51257 Change-Id: Ibb767d8a016934431660764b0194634e2113fea2

Summary: findReachingDefs was incorrectly using its fast path of just blitting in the live range extension when it did not see an undef itself but encountered an undef live out of a predecessor block. Now RegisterCoalescing calls extendToIndices (D49097), the bug was causing an incorrect subrange which led to a "Couldn't join subrange!" assert in a later coalesce. Subscribers: MatzeB, jvesely, nhaehnle, llvm-commits Differential Revision: https://reviews.llvm.org/D51574 Change-Id: I01c942b41ab5a145348289c8b221c45a2ec7200f

…vePartialRedundancy Summary: removePartialRedundancy was using extendToIndices on each subrange without passing in an Undefs vector containing main reg defs that are undef in the subrange, causing the above assert. Unfortunately I can only reproduce this in an ll test. Turning it into a mir test makes the problem go away. Subscribers: MatzeB, qcolombet, jvesely, nhaehnle, llvm-commits Differential Revision: https://reviews.llvm.org/D51849 Change-Id: I4f3ba2afb20d79f9467afb3d882f0328d38531be

…wCopyChain valuesIdentical is called to determine whether a def can be considered an "identical erase" because following copy chains proves that the value being copied is the same value as the value of the other register. The tests show up problems where the main range decides that a def is an "identical erase" but a subrange disagrees, because following the copy chain leads to a def that does not define all subregs in the subrange (in the case of one test) or a different def to that found in the main range (in the case of the other test). The fix here is to only detect an "identical erase" in the main range. If it is found, it is automatically inherited by the corresponding def in any subrange, without further analysis of that subrange value. This fix supersedes D49535/rL338070 and D51848. Change-Id: I059b5b2273ed6f186d134b98c118fef0494e02f8

This is a temporary fix to avoid a breakage where the export(s) for a pixel shader are in control flow (due to a kill). A pixel shader must execute an export done, even with exec=0. A better fix would be to have a pixel-shader-only pass that inserts a null export done in the final basic block if there is not one already there. Change-Id: I22f201f95d52ff699aa8cac26bb019717b20432e

LLPC has .ll file library functions that break this verifier check. We need to fix those before re-enabling the check. Change-Id: I4c000793a805a50f1d91d1ae55c567a356e72519

This commit fixes a really fun bug with inst combine where you have a vector-of-pointers and only one element of this vector is used. InstCombine correctly notes that an element is not used, and then will go back through a gep into that vector-of-pointers and set all vector elements to undef. This is fine in all cases except that the langref (and a ton of places in the optimizer) requires that indexing into a struct has the same index for each element of the vector-of-pointers. To fix the bug I've just made the gep/undef propagation check that the current type being indexed into is not a struct when doing the undef propagation. Differential Revision: https://reviews.llvm.org/D60600 Change-Id: I6eba34b1cde9c14751c39f04627e39425639ab3b

…d non-divergent Summary: This fixes an issue where values are uniform inside of a loop but the uses of that value outside the loop can be divergent. This is a temporary fix until the library linker issues can be resolved in llvm. Change-Id: I94d3d2e30cc2a6ae8d59e92cadf6f1b6cb7e708b

Implement a pass, enabled by -amdgpu-scratch-bounds-checking, or the subtarget feature "enable-scratch-bounds-checks", which adds bounds checks to scratch accesses. When this pass is enabled, out-of-bounds writes have no effect and out-of-bounds reads return zero. This is useful for GFX9 where hardware no longer performs bounds checking on scratch accesses and hence page faults result for out-of-bounds accesses by generated by shaders. Change-Id: Id2ee4b1f32e70b6bde2541db755727b6a407721b

stripValuesNotDefiningMask was asserting that it did not leave an empty subrange. However that was bogus because the subrange could have been empty to start with, in the case that LiveRangeCalc::calculate saw a subreg use that caused a subrange to be created empty. Differential Revision: https://reviews.llvm.org/D63510 Change-Id: Ibf862415ea422198975cc7a2ca2d98531beec08d

…REL_OFFSET is 0" This reverts commit 58b3837. That commit was causing an unnecessary reloc when accessing a global in the same section. On PAL, that breaks our use of a read-only global variable as an optimization of a local variable with constant initialization, because the PAL loader ignores the reloc. Change-Id: I2792404227d08d98baee69504509828de7e9b36c

Implement appropriate register allocation and exec mask usage for wave32 scenarios. Change-Id: I844018f6c07fdda46366af51654017fb4b654d8a

Extended test to check wave32 and gfx10 Change-Id: I620c6d9e737ddccdfd3494abf72632d7ecc4a53f

Change-Id: I3557477344135f7dbece33a2945bcb9f4063c10f

Extend LoadStoreOptimizer to handle IMAGE_LOAD and IMAGE_SAMPLE. Change-Id: Id49c992b9781254e39e1352125f5ffb212fe4f24

Summary: Backend defaults to setting WGP mode to 0 or 1 depending on the cumode feature. For PAL clients we want PAL to set this mode. Adding check to prevent the backend overriding whatever the front end has set. Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits Tags: #llvm Differential Revision: https://reviews.llvm.org/D63639 Change-Id: Ia3bac3e562fb47089f05c11cae47d1c92f7195ee

Fix a breakage in areMemAccessesTriviallyDisjoint, caused by trying to merge a non-load MIMG instruction IMAGE_GET_RESINFO. Only MIMG that loads from memory should be considered. Change-Id: I012435534b3e6161ee7feb686d4711097d2ab980

Currently the atomic optimizer does not support wave32, and may generate DPP which is incompatible with GFX10. This change allows the atomic optimizer to be enabled unconditionally by the LLPC for all ASICs. Change-Id: Ia26b527675b6e07319f4299b3f82ad405916bad6

Summary: This fixes B42473 and B42706. This patch makes the SDA propagate branch divergence until the end of the RPO traversal. Before, the SyncDependenceAnalysis propagated divergence only until the IPD in rpo order. RPO is incompatible with post dominance in the presence of loops. This made the SDA crash because blocks were missed in the propagation. Reviewers: foad, nhaehnle Subscribers: jvesely, llvm-commits Tags: #llvm Differential Revision: https://reviews.llvm.org/D65274 Change-Id: Ic3fcc51e5850fde3a4649ec3dd84a040a07aaca9

Summary: Add support for gfx10, where all DPP operations are confined to work within a single row of 16 lanes, and wave32. Reviewers: arsenm, sheredom, critson, rampitec Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, jfb, dstuttard, tpr, llvm-commits Tags: #llvm Differential Revision: https://reviews.llvm.org/D65644 Change-Id: I1f8991e9cf732e79a139e79e70a2bf62650693d4

…DD_REL_OFFSET is 0" This reverts commit ad3ea6fe0eedc9fe48b96453cfed51f8c1dd79de.

…ord in SI_PC_ADD_REL_OFFSET is 0" (From Jay) D61491 caused us to use relocs when they're not strictly necessary, to refer to symbols in the text section. This is a pessimization and it's a problem for some loaders that don't support relocs yet. Differential Revision: https://reviews.llvm.org/D65813 Change-Id: Ia84de963ad099b7d2fcfb9cd2b908fa2e5a4788b

Change-Id: I3dddc18d5dea0fd1050633e35d0ac463a9ed26ca

… -analyzer-config I am working on another patch that changes StringMap's hash function, which changes the iteration order here, and breaks some tests, specifically: clang/test/Analysis/NSString.m clang/test/Analysis/shallow-mode.m with errors like: generated arguments do not match in round-trip generated arguments #1 in round-trip: <...> "-analyzer-config" "ipa=inlining" "-analyzer-config" "max-nodes=75000" <...> generated arguments #2 in round-trip: <...> "-analyzer-config" "max-nodes=75000" "-analyzer-config" "ipa=inlining" <...> To avoid this, sort the options by key, instead of using the default map iteration order. Reviewed By: jansvoboda11, MaskRay Differential Revision: https://reviews.llvm.org/D142861

This change prevents rare deadlocks observed for specific macOS/iOS GUI applications which issue many `dlopen()` calls from multiple different threads at startup and where TSan finds and reports a race during startup. Providing a reliable test for this has been deemed infeasible. Although I've only observed this deadlock on Apple platforms, conceptually the cause is not confined to Apple code so the fix lives in platform-independent code. Deadlock scenario: ``` Thread 2 | Thread 4 ReportRace() | Lock internal TSan mutexes | &ctx->slot_mtx | | dlopen() interceptor | OnLibraryLoaded() | MemoryMappingLayout::DumpListOfModules() | calls dyld API, which takes internal lock | lock() interceptor | TSan tries to take internal mutexes again | &ctx->slot_mtx call into symbolizer | MemoryMappingLayout::DumpListOfModules() calls dyld API, which hangs on trying to take lock ``` Resulting in: * Thread 2 has internal TSan mutex, blocked on dyld lock * Thread 4 has dyld lock, blocked on internal TSan mutex The fix prevents this situation by not intercepting any of the calls originating from `MemoryMappingLayout::DumpListOfModules()`. Stack traces for deadlock between ReportRace() and dlopen() interceptor: ``` thread #2, queue = 'com.apple.root.default-qos' frame #0: libsystem_kernel.dylib frame #1: libclang_rt.tsan_osx_dynamic.dylib`::wrap_os_unfair_lock_lock_with_options(lock=<unavailable>, options=<unavailable>) at tsan_interceptors_mac.cpp:306:3 frame #2: dyld`dyld4::RuntimeLocks::withLoadersReadLock(this=0x000000016f21b1e0, work=0x00000001814523c0) block_pointer) at DyldRuntimeState.cpp:227:28 frame #3: dyld`dyld4::APIs::_dyld_get_image_header(this=0x0000000101012a20, imageIndex=614) at DyldAPIs.cpp:240:11 frame llvm#4: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::CurrentImageHeader(this=<unavailable>) at sanitizer_procmaps_mac.cpp:391:35 frame llvm#5: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::Next(this=0x000000016f2a2800, segment=0x000000016f2a2738) at sanitizer_procmaps_mac.cpp:397:51 frame llvm#6: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::DumpListOfModules(this=0x000000016f2a2800, modules=0x00000001011000a0) at sanitizer_procmaps_mac.cpp:460:10 frame llvm#7: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::ListOfModules::init(this=0x00000001011000a0) at sanitizer_mac.cpp:610:18 frame llvm#8: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::Symbolizer::FindModuleForAddress(unsigned long) [inlined] __sanitizer::Symbolizer::RefreshModules(this=0x0000000101100078) at sanitizer_symbolizer_libcdep.cpp:185:12 frame llvm#9: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::Symbolizer::FindModuleForAddress(this=0x0000000101100078, address=6465454512) at sanitizer_symbolizer_libcdep.cpp:204:5 frame llvm#10: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::Symbolizer::SymbolizePC(this=0x0000000101100078, addr=6465454512) at sanitizer_symbolizer_libcdep.cpp:88:15 frame llvm#11: libclang_rt.tsan_osx_dynamic.dylib`__tsan::SymbolizeCode(addr=6465454512) at tsan_symbolize.cpp:106:35 frame llvm#12: libclang_rt.tsan_osx_dynamic.dylib`__tsan::SymbolizeStack(trace=StackTrace @ 0x0000600002d66d00) at tsan_rtl_report.cpp:112:28 frame llvm#13: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedReportBase::AddMemoryAccess(this=0x000000016f2a2a90, addr=4381057136, external_tag=<unavailable>, s=<unavailable>, tid=<unavailable>, stack=<unavailable>, mset=0x00000001012fc310) at tsan_rtl_report.cpp:190:16 frame llvm#14: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ReportRace(thr=0x00000001012fc000, shadow_mem=0x000008020a4340e0, cur=<unavailable>, old=<unavailable>, typ0=1) at tsan_rtl_report.cpp:795:9 frame llvm#15: libclang_rt.tsan_osx_dynamic.dylib`__tsan::DoReportRace(thr=0x00000001012fc000, shadow_mem=0x000008020a4340e0, cur=Shadow @ x22, old=Shadow @ 0x0000600002d6b4f0, typ=1) at tsan_rtl_access.cpp:166:3 frame llvm#16: libclang_rt.tsan_osx_dynamic.dylib`::__tsan_read8(void *) at tsan_rtl_access.cpp:220:5 frame llvm#17: libclang_rt.tsan_osx_dynamic.dylib`::__tsan_read8(void *) [inlined] __tsan::MemoryAccess(thr=0x00000001012fc000, pc=<unavailable>, addr=<unavailable>, size=8, typ=1) at tsan_rtl_access.cpp:442:3 frame llvm#18: libclang_rt.tsan_osx_dynamic.dylib`::__tsan_read8(addr=<unavailable>) at tsan_interface.inc:34:3 <call into TSan from from instrumented code> thread llvm#4, queue = 'com.apple.dock.fullscreen' frame #0: libsystem_kernel.dylib frame #1: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::FutexWait(p=<unavailable>, cmp=<unavailable>) at sanitizer_mac.cpp:540:3 frame #2: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::Semaphore::Wait(this=<unavailable>) at sanitizer_mutex.cpp:35:7 frame #3: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::Mutex::Lock(this=0x0000000102992a80) at sanitizer_mutex.h:196:18 frame llvm#4: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor() [inlined] __sanitizer::GenericScopedLock<__sanitizer::Mutex>::GenericScopedLock(this=<unavailable>, mu=0x0000000102992a80) at sanitizer_mutex.h:383:10 frame llvm#5: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor() [inlined] __sanitizer::GenericScopedLock<__sanitizer::Mutex>::GenericScopedLock(this=<unavailable>, mu=0x0000000102992a80) at sanitizer_mutex.h:382:77 frame llvm#6: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor() at tsan_rtl.h:708:10 frame llvm#7: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor() [inlined] __tsan::TryTraceFunc(thr=0x000000010f084000, pc=0) at tsan_rtl.h:751:7 frame llvm#8: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor() [inlined] __tsan::FuncExit(thr=0x000000010f084000) at tsan_rtl.h:798:7 frame llvm#9: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor(this=0x000000016f3ba280) at tsan_interceptors_posix.cpp:300:5 frame llvm#10: libclang_rt.tsan_osx_dynamic.dylib`__tsan::ScopedInterceptor::~ScopedInterceptor(this=<unavailable>) at tsan_interceptors_posix.cpp:293:41 frame llvm#11: libclang_rt.tsan_osx_dynamic.dylib`::wrap_os_unfair_lock_lock_with_options(lock=0x000000016f21b1e8, options=OS_UNFAIR_LOCK_NONE) at tsan_interceptors_mac.cpp:310:1 frame llvm#12: dyld`dyld4::RuntimeLocks::withLoadersReadLock(this=0x000000016f21b1e0, work=0x00000001814525d4) block_pointer) at DyldRuntimeState.cpp:227:28 frame llvm#13: dyld`dyld4::APIs::_dyld_get_image_vmaddr_slide(this=0x0000000101012a20, imageIndex=412) at DyldAPIs.cpp:273:11 frame llvm#14: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::Next(__sanitizer::MemoryMappedSegment*) at sanitizer_procmaps_mac.cpp:286:17 frame llvm#15: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::Next(this=0x000000016f3ba560, segment=0x000000016f3ba498) at sanitizer_procmaps_mac.cpp:432:15 frame llvm#16: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::MemoryMappingLayout::DumpListOfModules(this=0x000000016f3ba560, modules=0x000000016f3ba618) at sanitizer_procmaps_mac.cpp:460:10 frame llvm#17: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::ListOfModules::init(this=0x000000016f3ba618) at sanitizer_mac.cpp:610:18 frame llvm#18: libclang_rt.tsan_osx_dynamic.dylib`__sanitizer::LibIgnore::OnLibraryLoaded(this=0x0000000101f3aa40, name="<some library>") at sanitizer_libignore.cpp:54:11 frame llvm#19: libclang_rt.tsan_osx_dynamic.dylib`::wrap_dlopen(filename="<some library>", flag=<unavailable>) at sanitizer_common_interceptors.inc:6466:3 <library code> ``` rdar://106766395 Differential Revision: https://reviews.llvm.org/D146593

…est unittest Need to finalize the DIBuilder to avoid leak sanitizer errors like this: Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x55c99ea1761d in operator new(unsigned long) #1 0x55c9a518ae49 in operator new #2 0x55c9a518ae49 in llvm::MDTuple::getImpl(...) #3 0x55c9a4f1b1ec in getTemporary llvm#4 0x55c9a4f1b1ec in llvm::DIBuilder::createFunction(...)

Running this on Amazon Ubuntu the final backtrace is: ``` (lldb) thread backtrace * thread #1, name = 'a.out', stop reason = breakpoint 1.1 * frame #0: 0x0000aaaaaaaa07d0 a.out`func_c at main.c:10:3 frame #1: 0x0000aaaaaaaa07c4 a.out`func_b at main.c:14:3 frame #2: 0x0000aaaaaaaa07b4 a.out`func_a at main.c:18:3 frame #3: 0x0000aaaaaaaa07a4 a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:22:3 frame llvm#4: 0x0000fffff7b373fc libc.so.6`___lldb_unnamed_symbol2962 + 108 frame llvm#5: 0x0000fffff7b374cc libc.so.6`__libc_start_main + 152 frame llvm#6: 0x0000aaaaaaaa06b0 a.out`_start + 48 ``` This causes the test to fail because of the extra ___lldb_unnamed_symbol2962 frame (an inlined function?). To fix this, strictly check all the frames in main.c then for the rest just check we find __libc_start_main and _start in that order regardless of other frames in between. Reviewed By: omjavaid Differential Revision: https://reviews.llvm.org/D154204

…tput The crash happens in clang::driver::tools::SplitDebugName when Output is InputInfo::Nothing. It doesn't happen with standalone clang driver because output is created in Driver::BuildJobsForActionNoCache. Example backtrace: ``` * thread #1, name = 'clangd', stop reason = hit program assert * frame #0: 0x00007ffff5c4eacf libc.so.6`raise + 271 frame #1: 0x00007ffff5c21ea5 libc.so.6`abort + 295 frame #2: 0x00007ffff5c21d79 libc.so.6`__assert_fail_base.cold.0 + 15 frame #3: 0x00007ffff5c47426 libc.so.6`__assert_fail + 70 frame llvm#4: 0x000055555dc0923c clangd`clang::driver::InputInfo::getFilename(this=0x00007fffffff9398) const at InputInfo.h:84:5 frame llvm#5: 0x000055555dcd0d8d clangd`clang::driver::tools::SplitDebugName(JA=0x000055555f6c6a50, Args=0x000055555f6d0b80, Input=0x00007fffffff9678, Output=0x00007fffffff9398) at CommonArgs.cpp:1275:40 frame llvm#6: 0x000055555dc955a5 clangd`clang::driver::tools::Clang::ConstructJob(this=0x000055555f6c69d0, C=0x000055555f6c64a0, JA=0x000055555f6c6a50, Output=0x00007fffffff9398, Inputs=0x00007fffffff9668, Args=0x000055555f6d0b80, LinkingOutput=0x0000000000000000) const at Clang.cpp:5690:33 frame llvm#7: 0x000055555dbf6b54 clangd`clang::driver::Driver::BuildJobsForActionNoCache(this=0x00007fffffffb5e0, C=0x000055555f6c64a0, A=0x000055555f6c6a50, TC=0x000055555f6c4be0, BoundArch=(Data = 0x0000000000000000, Length = 0), AtTopLevel=true, MultipleArchs=false, LinkingOutput=0x0000000000000000, CachedResults=size=1, TargetDeviceOffloadKind=OFK_None) const at Driver.cpp:5618:10 frame llvm#8: 0x000055555dbf4ef0 clangd`clang::driver::Driver::BuildJobsForAction(this=0x00007fffffffb5e0, C=0x000055555f6c64a0, A=0x000055555f6c6a50, TC=0x000055555f6c4be0, BoundArch=(Data = 0x0000000000000000, Length = 0), AtTopLevel=true, MultipleArchs=false, LinkingOutput=0x0000000000000000, CachedResults=size=1, TargetDeviceOffloadKind=OFK_None) const at Driver.cpp:5306:26 frame llvm#9: 0x000055555dbeb590 clangd`clang::driver::Driver::BuildJobs(this=0x00007fffffffb5e0, C=0x000055555f6c64a0) const at Driver.cpp:4844:5 frame llvm#10: 0x000055555dbe6b0f clangd`clang::driver::Driver::BuildCompilation(this=0x00007fffffffb5e0, ArgList=ArrayRef<const char *> @ 0x00007fffffffb268) at Driver.cpp:1496:3 frame llvm#11: 0x000055555b0cc0d9 clangd`clang::createInvocation(ArgList=ArrayRef<const char *> @ 0x00007fffffffbb38, Opts=CreateInvocationOptions @ 0x00007fffffffbb90) at CreateInvocationFromCommandLine.cpp:53:52 frame llvm#12: 0x000055555b378e7b clangd`clang::clangd::buildCompilerInvocation(Inputs=0x00007fffffffca58, D=0x00007fffffffc158, CC1Args=size=0) at Compiler.cpp:116:44 frame llvm#13: 0x000055555895a6c8 clangd`clang::clangd::(anonymous namespace)::Checker::buildInvocation(this=0x00007fffffffc760, TFS=0x00007fffffffe570, Contents= Has Value=false ) at Check.cpp:212:9 frame llvm#14: 0x0000555558959cec clangd`clang::clangd::check(File=(Data = "build/test.cpp", Length = 64), TFS=0x00007fffffffe570, Opts=0x00007fffffffe600) at Check.cpp:486:34 frame llvm#15: 0x000055555892164a clangd`main(argc=4, argv=0x00007fffffffecd8) at ClangdMain.cpp:993:12 frame llvm#16: 0x00007ffff5c3ad85 libc.so.6`__libc_start_main + 229 frame llvm#17: 0x00005555585bbe9e clangd`_start + 46 ``` Test Plan: ninja ClangDriverTests && tools/clang/unittests/Driver/ClangDriverTests Differential Revision: https://reviews.llvm.org/D154602

TSan reports the following data race: Write of size 4 at 0x000109e0b160 by thread T2 (mutexes: write M0, write M1): #0 NativeFile::Close() File.cpp:329 #1 ConnectionFileDescriptor::Disconnect(lldb_private::Status*) ConnectionFileDescriptorPosix.cpp:232 #2 Communication::Disconnect(lldb_private::Status*) Communication.cpp:61 #3 process_gdb_remote::ProcessGDBRemote::DidExit() ProcessGDBRemote.cpp:1164 llvm#4 Process::SetExitStatus(int, char const*) Process.cpp:1097 llvm#5 process_gdb_remote::ProcessGDBRemote::MonitorDebugserverProcess(...) ProcessGDBRemote.cpp:3387 Previous read of size 4 at 0x000109e0b160 by main thread (mutexes: write M2): #0 NativeFile::IsValid() const File.h:393 #1 ConnectionFileDescriptor::IsConnected() const ConnectionFileDescriptorPosix.cpp:121 #2 Communication::IsConnected() const Communication.cpp:79 #3 process_gdb_remote::GDBRemoteCommunication::WaitForPacketNoLock(...) GDBRemoteCommunication.cpp:256 llvm#4 process_gdb_remote::GDBRemoteCommunication::WaitForPacketNoLock(...l) GDBRemoteCommunication.cpp:244 llvm#5 process_gdb_remote::GDBRemoteClientBase::SendPacketAndWaitForResponseNoLock(llvm::StringRef, StringExtractorGDBRemote&) GDBRemoteClientBase.cpp:246 The problem is that in WaitForPacketNoLock's run loop, it checks that the connection is still connected. This races with the ConnectionFileDescriptor disconnecting. Most (but not all) access to the IOObject in ConnectionFileDescriptorPosix is already gated by the mutex. This patch just protects IsConnected in the same way. Differential revision: https://reviews.llvm.org/D157347

Thread sanitizer reports the following data race: ``` WARNING: ThreadSanitizer: data race (pid=43201) Write of size 4 at 0x00010520c474 by thread T1 (mutexes: write M0, write M1): #0 lldb_private::PipePosix::CloseWriteFileDescriptor() PipePosix.cpp:242 (liblldb.18.0.0git.dylib:arm64+0x414700) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #1 lldb_private::PipePosix::Close() PipePosix.cpp:217 (liblldb.18.0.0git.dylib:arm64+0x4144e8) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #2 lldb_private::ConnectionFileDescriptor::Disconnect(lldb_private::Status*) ConnectionFileDescriptorPosix.cpp:239 (liblldb.18.0.0git.dylib:arm64+0x40a620) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #3 lldb_private::Communication::Disconnect(lldb_private::Status*) Communication.cpp:61 (liblldb.18.0.0git.dylib:arm64+0x2a9318) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) llvm#4 lldb_private::process_gdb_remote::ProcessGDBRemote::DidExit() ProcessGDBRemote.cpp:1167 (liblldb.18.0.0git.dylib:arm64+0x8ed984) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) Previous read of size 4 at 0x00010520c474 by main thread (mutexes: write M2, write M3): #0 lldb_private::PipePosix::CanWrite() const PipePosix.cpp:229 (liblldb.18.0.0git.dylib:arm64+0x4145e4) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #1 lldb_private::ConnectionFileDescriptor::Disconnect(lldb_private::Status*) ConnectionFileDescriptorPosix.cpp:212 (liblldb.18.0.0git.dylib:arm64+0x40a4a8) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #2 lldb_private::Communication::Disconnect(lldb_private::Status*) Communication.cpp:61 (liblldb.18.0.0git.dylib:arm64+0x2a9318) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) #3 lldb_private::process_gdb_remote::GDBRemoteCommunication::WaitForPacketNoLock(StringExtractorGDBRemote&, lldb_private::Timeout<std::__1::ratio<1l, 1000000l>>, bool) GDBRemoteCommunication.cpp:373 (liblldb.18.0.0git.dylib:arm64+0x8b9c48) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) llvm#4 lldb_private::process_gdb_remote::GDBRemoteCommunication::WaitForPacketNoLock(StringExtractorGDBRemote&, lldb_private::Timeout<std::__1::ratio<1l, 1000000l>>, bool) GDBRemoteCommunication.cpp:243 (liblldb.18.0.0git.dylib:arm64+0x8b9904) (BuildId: 2983976beb2637b5943bff32fd12eb8932000000200000000100000000000e00) ``` Fix this by adding a mutex to PipePosix. Differential Revision: https://reviews.llvm.org/D157654

ThreadSanitizer reports the following issue: ``` Write of size 8 at 0x00010a70abb0 by thread T3 (mutexes: write M0): #0 lldb_private::ThreadList::Update(lldb_private::ThreadList&) ThreadList.cpp:741 (liblldb.18.0.0git.dylib:arm64+0x5dedf4) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00) #1 lldb_private::Process::UpdateThreadListIfNeeded() Process.cpp:1212 (liblldb.18.0.0git.dylib:arm64+0x53bbec) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00) Previous read of size 8 at 0x00010a70abb0 by main thread (mutexes: write M1): #0 lldb_private::ThreadList::GetMutex() const ThreadList.cpp:785 (liblldb.18.0.0git.dylib:arm64+0x5df138) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00) #1 lldb_private::ThreadList::DidResume() ThreadList.cpp:656 (liblldb.18.0.0git.dylib:arm64+0x5de5c0) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00) #2 lldb_private::Process::PrivateResume() Process.cpp:3130 (liblldb.18.0.0git.dylib:arm64+0x53cd7c) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00) ``` Fix this by only using the mutex in ThreadList and removing the one in process entirely. Differential Revision: https://reviews.llvm.org/D158034

@foo

Replace `BPFMIPeepholeTruncElim` by adding an overload for `TargetLowering::isZExtFree()` aware that zero extension is free for `ISD::LOAD`. Short description ================= The `BPFMIPeepholeTruncElim` handles two patterns: Pattern #1: %1 = LDB %0, ... %1 = LDB %0, ... %2 = AND_ri %1, 0xff -> %2 = MOV_ri %1 <-- (!) Pattern #2: bb.1: bb.1: %a = LDB %0, ... %a = LDB %0, ... br %bb3 br %bb3 bb.2: bb.2: %b = LDB %0, ... -> %b = LDB %0, ... br %bb3 br %bb3 bb.3: bb.3: %1 = PHI %a, %b %1 = PHI %a, %b %2 = AND_ri %1, 0xff %2 = MOV_ri %1 <-- (!) Plus variations: - AND_ri_32 instead of AND_ri - SLL/SLR instead of AND_ri - LDH, LDW, LDB32, LDH32, LDW32 Both patterns could be handled by built-in transformations at instruction selection phase if suitable `isZExtFree()` implementation is provided. The idea is borrowed from `ARMTargetLowering::isZExtFree`. When evaluating on BPF kernel selftests and remove_truncate_*.ll LLVM test cases this revisions performs slightly better than BPFMIPeepholeTruncElim, see "Impact" section below for details. Commit also adds a few test cases to make sure that patterns in question are handled. Long description ================ Why this works: Pattern #1 -------------------------- Consider the following example: define i1 @foo(ptr %p) { entry: %a = load i8, ptr %p, align 1 %cond = icmp eq i8 %a, 0 ret i1 %cond } Log for `llc -mcpu=v2 -mtriple=bpfel -debug-only=isel` command: ... Type-legalized selection DAG: %bb.0 'foo:entry' SelectionDAG has 13 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %0 t16: i64,ch = load<(load (s8) from %ir.p), anyext from i8> t0, t2, undef:i64 t19: i64 = and t16, Constant:i64<255> t17: i64 = setcc t19, Constant:i64<0>, seteq:ch t11: ch,glue = CopyToReg t0, Register:i64 $r0, t17 t12: ch = BPFISD::RET_GLUE t11, Register:i64 $r0, t11:1 ... Replacing.1 t19: i64 = and t16, Constant:i64<255> With: t16: i64,ch = load<(load (s8) from %ir.p), anyext from i8> t0, t2, undef:i64 and 0 other values ... Optimized type-legalized selection DAG: %bb.0 'foo:entry' SelectionDAG has 11 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %0 t20: i64,ch = load<(load (s8) from %ir.p), zext from i8> t0, t2, undef:i64 t17: i64 = setcc t20, Constant:i64<0>, seteq:ch t11: ch,glue = CopyToReg t0, Register:i64 $r0, t17 t12: ch = BPFISD::RET_GLUE t11, Register:i64 $r0, t11:1 ... Note: - Optimized type-legalized selection DAG: - `t19 = and t16, 255` had been replaced by `t16` (load). - Patterns like `(and (load ... i8), 255)` are replaced by `load` in `DAGCombiner::BackwardsPropagateMask` called from `DAGCombiner::visitAND`. - Similarly patterns like `(shl (srl ..., 56), 56)` are replaced by `(and ..., 255)` in `DAGCombiner::visitSRL` (this function is huge, look for `TLI.shouldFoldConstantShiftPairToMask()` call). Why this works: Pattern #2 -------------------------- Consider the following example: define i1 @foo(ptr %p) { entry: %a = load i8, ptr %p, align 1 br label %next next: %cond = icmp eq i8 %a, 0 ret i1 %cond } Consider log for `llc -mcpu=v2 -mtriple=bpfel -debug-only=isel` command. Log for first basic block: Initial selection DAG: %bb.0 'foo:entry' SelectionDAG has 9 nodes: t0: ch,glue = EntryToken t3: i64 = Constant<0> t2: i64,ch = CopyFromReg t0, Register:i64 %1 t5: i8,ch = load<(load (s8) from %ir.p)> t0, t2, undef:i64 t6: i64 = zero_extend t5 t8: ch = CopyToReg t0, Register:i64 %0, t6 ... Replacing.1 t6: i64 = zero_extend t5 With: t9: i64,ch = load<(load (s8) from %ir.p), zext from i8> t0, t2, undef:i64 and 0 other values ... Optimized lowered selection DAG: %bb.0 'foo:entry' SelectionDAG has 7 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %1 t9: i64,ch = load<(load (s8) from %ir.p), zext from i8> t0, t2, undef:i64 t8: ch = CopyToReg t0, Register:i64 %0, t9 Note: - Initial selection DAG: - `%a = load ...` is lowered as `t6 = (zero_extend (load ...))` w/o special `isZExtFree()` overload added by this commit it is instead lowered as `t6 = (any_extend (load ...))`. - The decision to generate `zero_extend` or `any_extend` is done in `RegsForValue::getCopyToRegs` called from `SelectionDAGBuilder::CopyValueToVirtualRegister`: - if `isZExtFree()` for load returns true `zero_extend` is used; - `any_extend` is used otherwise. - Optimized lowered selection DAG: - `t6 = (any_extend (load ...))` is replaced by `t9 = load ..., zext from i8` This is done by `DagCombiner.cpp:tryToFoldExtOfLoad()` called from `DAGCombiner::visitZERO_EXTEND`. Log for second basic block: Initial selection DAG: %bb.1 'foo:next' SelectionDAG has 13 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %0 t4: i64 = AssertZext t2, ValueType:ch:i8 t5: i8 = truncate t4 t8: i1 = setcc t5, Constant:i8<0>, seteq:ch t9: i64 = any_extend t8 t11: ch,glue = CopyToReg t0, Register:i64 $r0, t9 t12: ch = BPFISD::RET_GLUE t11, Register:i64 $r0, t11:1 ... Replacing.2 t18: i64 = and t4, Constant:i64<255> With: t4: i64 = AssertZext t2, ValueType:ch:i8 ... Type-legalized selection DAG: %bb.1 'foo:next' SelectionDAG has 13 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %0 t4: i64 = AssertZext t2, ValueType:ch:i8 t18: i64 = and t4, Constant:i64<255> t16: i64 = setcc t18, Constant:i64<0>, seteq:ch t11: ch,glue = CopyToReg t0, Register:i64 $r0, t16 t12: ch = BPFISD::RET_GLUE t11, Register:i64 $r0, t11:1 ... Optimized type-legalized selection DAG: %bb.1 'foo:next' SelectionDAG has 11 nodes: t0: ch,glue = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %0 t4: i64 = AssertZext t2, ValueType:ch:i8 t16: i64 = setcc t4, Constant:i64<0>, seteq:ch t11: ch,glue = CopyToReg t0, Register:i64 $r0, t16 t12: ch = BPFISD::RET_GLUE t11, Register:i64 $r0, t11:1 ... Note: - Initial selection DAG: - `t0` is an input value for this basic block, it corresponds load instruction (`t9`) from the first basic block. - It is accessed within basic block via `t4` (AssertZext (CopyFromReg t0, ...)). - The `AssertZext` is generated by RegsForValue::getCopyFromRegs called from SelectionDAGBuilder::getCopyFromRegs, it is generated only when `LiveOutInfo` with known number of leading zeros is present for `t0`. - Known register bits in `LiveOutInfo` are computed by `SelectionDAG::computeKnownBits` called from `SelectionDAGISel::ComputeLiveOutVRegInfo`. - `computeKnownBits()` generates leading zeros information for `(load ..., zext from ...)` but *does not* generate leading zeros information for `(load ..., anyext from ...)`. This is why `isZExtFree()` added in this commit is important. - Type-legalized selection DAG: - `t5 = truncate t4` is replaced by `t18 = and t4, 255` - Optimized type-legalized selection DAG: - `t18 = and t4, 255` is replaced by `t4`, this is done by `DAGCombiner::SimplifyDemandedBits` called from `DAGCombiner::visitAND`, which simplifies patterns like `(and (assertzext ...))` Impact ------ This change covers all remove_truncate_*.ll test cases: - for -mcpu=v4 there are no changes in the generated code; - for -mcpu=v2 code generated for remove_truncate_7 and remove_truncate_8 improved slightly, for other tests it is unchanged. For remove_truncate_7: Before this revision After this revision -------------------- ------------------- r1 <<= 0x20 r1 <<= 0x20 r1 >>= 0x20 r1 >>= 0x20 if r1 == 0x0 goto +0x2 <LBB0_2> if r1 == 0x0 goto +0x2 <LBB0_2> r1 = *(u32 *)(r2 + 0x0) r0 = *(u32 *)(r2 + 0x0) goto +0x1 <LBB0_3> goto +0x1 <LBB0_3> <LBB0_2>: <LBB0_2>: r1 = *(u32 *)(r2 + 0x4) r0 = *(u32 *)(r2 + 0x4) <LBB0_3>: <LBB0_3>: r0 = r1 exit exit For remove_truncate_8: Before this revision After this revision -------------------- ------------------- r2 = *(u32 *)(r1 + 0x0) r2 = *(u32 *)(r1 + 0x0) r3 = r2 r3 = r2 r3 <<= 0x20 r3 <<= 0x20 r4 = r3 r3 s>>= 0x20 r4 s>>= 0x20 if r4 s> 0x2 goto +0x5 <LBB0_3> if r3 s> 0x2 goto +0x4 <LBB0_3> r4 = *(u32 *)(r1 + 0x4) r3 = *(u32 *)(r1 + 0x4) r3 >>= 0x20 if r3 >= r4 goto +0x2 <LBB0_3> if r2 >= r3 goto +0x2 <LBB0_3> r2 += 0x2 r2 += 0x2 *(u32 *)(r1 + 0x0) = r2 *(u32 *)(r1 + 0x0) = r2 <LBB0_3>: <LBB0_3>: r0 = 0x3 r0 = 0x3 exit exit For kernel BPF selftests statistics is as follows: (-mcpu=v4): - For -mcpu=v4: 9 out of 655 object files have differences, in all cases total number of instructions marginally decreased (-27 instructions). - For -mcpu=v2: 9 out of 655 object files have differences: - For 19 object files number of instruction decreased (-129 instruction in total): some redundant `rX &= 0xffff` and register to register assignments removed; - For 2 object files number of instructions increased +2 instructions in each file. Both -mcpu=v2 instruction increases could be reduced to the same example: define void @foo(ptr %p) { entry: %a = load i32, ptr %p, align 4 %b = sext i32 %a to i64 %c = icmp ult i64 1, %b br i1 %c, label %next, label %end next: call void inttoptr (i64 62 to ptr)(i32 %a) br label %end end: ret void } Note that this example uses value loaded to `%a` both as a sign extended (`%b`) and as zero extended (`%a` passed as parameter). Here is the difference in final assembly code: Before this revision After this revision -------------------- ------------------- r1 = *(u32 *)(r1 + 0) r1 = *(u32 *)(r1 + 0) r1 <<= 32 r1 <<= 32 r1 s>>= 32 r1 s>>= 32 if r1 < 2 goto <LBB0_2> if r1 < 2 goto <LBB0_2> r1 <<= 32 r1 >>= 32 call 62 call 62 <LBB0_2>: <LBB0_2>: exit exit Before this commit `%a` is passed to call as a sign extended value, after this commit `%a` is passed to call as a zero extended value, both are correct as 32-bit sub-register is the same. The difference comes from `DAGCombiner` operation on the initial DAG: Initial selection DAG before this commit: t5: i32,ch = load<(load (s32) from %ir.p)> t0, t2, undef:i64 t6: i64 = any_extend t5 <--------------------- (1) t8: ch = CopyToReg t0, Register:i64 %0, t6 t9: i64 = sign_extend t5 t12: i1 = setcc Constant:i64<1>, t9, setult:ch Initial selection DAG after this commit: t5: i32,ch = load<(load (s32) from %ir.p)> t0, t2, undef:i64 t6: i64 = zero_extend t5 <--------------------- (2) t8: ch = CopyToReg t0, Register:i64 %0, t6 t9: i64 = sign_extend t5 t12: i1 = setcc Constant:i64<1>, t9, setult:ch The node `t9` is processed before node `t6` and `load` instruction is combined to load with sign extension: Replacing.1 t9: i64 = sign_extend t5 With: t30: i64,ch = load<(load (s32) from %ir.p), sext from i32> t0, t2, undef:i64 and 0 other values Replacing.1 t5: i32,ch = load<(load (s32) from %ir.p)> t0, t2, undef:i64 With: t31: i32 = truncate t30 and 1 other values This is done by `DAGCombiner.cpp:tryToFoldExtOfLoad` called from `DAGCombiner::visitSIGN_EXTEND`. Note that `t5` is used by `t6` which is `any_extend` in (1) and `zero_extend` in (2). `tryToFoldExtOfLoad()` rewrites such uses of `t5` differently: - `any_extend` is simply removed - `zero_extend` is replaced by `and t30, 0xffffffff`, which is later converted to a pair of shifts. This pair of shifts survives till the end of translation. Differential Revision: https://reviews.llvm.org/D157870

This reverts commit 0e63f1a. clang-format started to crash with contents like: a.h: ``` ``` $ clang-format a.h ``` PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: ../llvm/build/bin/clang-format a.h #0 0x0000560b689fe177 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /usr/local/google/home/kadircet/repos/llvm/llvm/lib/Support/Unix/Signals.inc:723:13 #1 0x0000560b689fbfbe llvm::sys::RunSignalHandlers() /usr/local/google/home/kadircet/repos/llvm/llvm/lib/Support/Signals.cpp:106:18 #2 0x0000560b689feaca SignalHandler(int) /usr/local/google/home/kadircet/repos/llvm/llvm/lib/Support/Unix/Signals.inc:413:1 #3 0x00007f030405a540 (/lib/x86_64-linux-gnu/libc.so.6+0x3c540) llvm#4 0x0000560b68a9a980 is /usr/local/google/home/kadircet/repos/llvm/clang/include/clang/Lex/Token.h:98:44 llvm#5 0x0000560b68a9a980 is /usr/local/google/home/kadircet/repos/llvm/clang/lib/Format/FormatToken.h:562:51 llvm#6 0x0000560b68a9a980 startsSequenceInternal<clang::tok::TokenKind, clang::tok::TokenKind> /usr/local/google/home/kadircet/repos/llvm/clang/lib/Format/FormatToken.h:831:9 llvm#7 0x0000560b68a9a980 startsSequence<clang::tok::TokenKind, clang::tok::TokenKind> /usr/local/google/home/kadircet/repos/llvm/clang/lib/Format/FormatToken.h:600:12 llvm#8 0x0000560b68a9a980 getFunctionName /usr/local/google/home/kadircet/repos/llvm/clang/lib/Format/TokenAnnotator.cpp:3131:17 llvm#9 0x0000560b68a9a980 clang::format::TokenAnnotator::annotate(clang::format::AnnotatedLine&) /usr/local/google/home/kadircet/repos/llvm/clang/lib/Format/TokenAnnotator.cpp:3191:17 Segmentation fault ```

The new ACLE PR#225[1] now combines the slice parameters for some builtins. This patch is the #2 of 3 patches to update the interface. Slice specifies the ZA slice number directly and needs to be explicity implemented by the "user" with the base register plus the immediate offset [1]https://github.com/ARM-software/acle/pull/225/files

…fine.parallel verifier This patch updates AffineParallelOp::verify() to check each result type matches its corresponding reduction op (i.e, the result type must be a `FloatType` if the reduction attribute is `addf`) affine.parallel will crash on --lower-affine if the corresponding result type cannot match the reduction attribute. ``` %128 = affine.parallel (%arg2, %arg3) = (0, 0) to (8, 7) reduce ("maxf") -> (memref<8x7xf32>) { %alloc_33 = memref.alloc() : memref<8x7xf32> affine.yield %alloc_33 : memref<8x7xf32> } ``` This will crash and report a type conversion issue when we run `mlir-opt --lower-affine` ``` Assertion failed: (isa<To>(Val) && "cast<Ty>() argument of incompatible type!"), function cast, file Casting.h, line 572. PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: mlir-opt --lower-affine temp.mlir #0 0x0000000102a18f18 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/workspacebin/mlir-opt+0x1002f8f18) #1 0x0000000102a171b4 llvm::sys::RunSignalHandlers() (/workspacebin/mlir-opt+0x1002f71b4) #2 0x0000000102a195c4 SignalHandler(int) (/workspacebin/mlir-opt+0x1002f95c4) #3 0x00000001be7894c4 (/usr/lib/system/libsystem_platform.dylib+0x1803414c4) llvm#4 0x00000001be771ee0 (/usr/lib/system/libsystem_pthread.dylib+0x180329ee0) llvm#5 0x00000001be6ac340 (/usr/lib/system/libsystem_c.dylib+0x180264340) llvm#6 0x00000001be6ab754 (/usr/lib/system/libsystem_c.dylib+0x180263754) llvm#7 0x0000000106864790 mlir::arith::getIdentityValueAttr(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (.cold.4) (/workspacebin/mlir-opt+0x104144790) llvm#8 0x0000000102ba66ac mlir::arith::getIdentityValueAttr(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (/workspacebin/mlir-opt+0x1004866ac) llvm#9 0x0000000102ba6910 mlir::arith::getIdentityValue(mlir::arith::AtomicRMWKind, mlir::Type, mlir::OpBuilder&, mlir::Location) (/workspacebin/mlir-opt+0x100486910) ... ``` Fixes llvm#64068 Reviewed By: mehdi_amini Differential Revision: https://reviews.llvm.org/D157985

…tePluginObject After llvm#68052 this function changed from returning a nullptr with `return {};` to returning Expected and hitting `llvm_unreachable` before it could do so. I gather that we're never supposed to call this function, but on Windows we actually do call this function because `interpreter->CreateScriptedProcessInterface()` returns `ScriptedProcessInterface` not `ScriptedProcessPythonInterface`. Likely because `target_sp->GetDebugger().GetScriptInterpreter()` also does not return a Python related class. The previously XFAILed test crashed with: ``` # .---command stderr------------ # | PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. # | Stack dump: # | 0. Program arguments: c:\\users\\tcwg\\david.spickett\\build-llvm\\bin\\lldb-test.exe ir-memory-map C:\\Users\\tcwg\\david.spickett\\build-llvm\\tools\\lldb\\test\\Shell\\Expr\\Output\\TestIRMemoryMapWindows.test.tmp C:\\Users\\tcwg\\david.spickett\\llvm-project\\lldb\\test\\Shell\\Expr/Inputs/ir-memory-map-basic # | 1. HandleCommand(command = "run") # | Exception Code: 0xC000001D # | #0 0x00007ff696b5f588 lldb_private::ScriptedProcessInterface::CreatePluginObject(class llvm::StringRef, class lldb_private::ExecutionContext &, class std::shared_ptr<class lldb_private::StructuredData::Dictionary>, class lldb_private::StructuredData::Generic *) C:\Users\tcwg\david.spickett\llvm-project\lldb\include\lldb\Interpreter\Interfaces\ScriptedProcessInterface.h:28:0 # | #1 0x00007ff696b1d808 llvm::Expected<std::shared_ptr<lldb_private::StructuredData::Generic> >::operator bool C:\Users\tcwg\david.spickett\llvm-project\llvm\include\llvm\Support\Error.h:567:0 # | #2 0x00007ff696b1d808 lldb_private::ScriptedProcess::ScriptedProcess(class std::shared_ptr<class lldb_private::Target>, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::ScriptedMetadata const &, class lldb_private::Status &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Process\scripted\ScriptedProcess.cpp:115:0 # | #3 0x00007ff696b1d124 std::shared_ptr<lldb_private::ScriptedProcess>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1478:0 # | llvm#4 0x00007ff696b1d124 lldb_private::ScriptedProcess::CreateInstance(class std::shared_ptr<class lldb_private::Target>, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Process\scripted\ScriptedProcess.cpp:61:0 # | llvm#5 0x00007ff69699c8f4 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | llvm#6 0x00007ff69699c8f4 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | llvm#7 0x00007ff69699c8f4 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | llvm#8 0x00007ff69699c8f4 lldb_private::Process::FindPlugin(class std::shared_ptr<class lldb_private::Target>, class llvm::StringRef, class std::shared_ptr<class lldb_private::Listener>, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Process.cpp:396:0 # | llvm#9 0x00007ff6969bd708 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | llvm#10 0x00007ff6969bd708 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | llvm#11 0x00007ff6969bd708 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | llvm#12 0x00007ff6969bd708 lldb_private::Target::CreateProcess(class std::shared_ptr<class lldb_private::Listener>, class llvm::StringRef, class lldb_private::FileSpec const *, bool) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Target.cpp:215:0 # | llvm#13 0x00007ff696b13af0 std::_Ptr_base<lldb_private::Process>::_Ptr_base C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1230:0 # | llvm#14 0x00007ff696b13af0 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1524:0 # | llvm#15 0x00007ff696b13af0 lldb_private::PlatformWindows::DebugProcess(class lldb_private::ProcessLaunchInfo &, class lldb_private::Debugger &, class lldb_private::Target &, class lldb_private::Status &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Plugins\Platform\Windows\PlatformWindows.cpp:495:0 # | llvm#16 0x00007ff6969cf590 std::_Ptr_base<lldb_private::Process>::_Move_construct_from C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1237:0 # | llvm#17 0x00007ff6969cf590 std::shared_ptr<lldb_private::Process>::shared_ptr C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1534:0 # | llvm#18 0x00007ff6969cf590 std::shared_ptr<lldb_private::Process>::operator= C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.35.32124\include\memory:1594:0 # | llvm#19 0x00007ff6969cf590 lldb_private::Target::Launch(class lldb_private::ProcessLaunchInfo &, class lldb_private::Stream *) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Target\Target.cpp:3274:0 # | llvm#20 0x00007ff696fff82c CommandObjectProcessLaunch::DoExecute(class lldb_private::Args &, class lldb_private::CommandReturnObject &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Commands\CommandObjectProcess.cpp:258:0 # | llvm#21 0x00007ff696fab6c0 lldb_private::CommandObjectParsed::Execute(char const *, class lldb_private::CommandReturnObject &) C:\Users\tcwg\david.spickett\llvm-project\lldb\source\Interpreter\CommandObject.cpp:751:0 # `----------------------------- # error: command failed with exit status: 0xc000001d ``` That might be a bug on the Windows side, or an artifact of how our build is setup, but whatever it is, having `CreatePluginObject` return an error and the caller check it, fixes the failing test. The built lldb can run the script command to use Python, but I'm not sure if that means anything.

…lvm#73463) Despite CWG2497 not being resolved, it is reasonable to expect the following code to compile (and which is supported by other compilers) ```cpp template<typename T> constexpr T f(); constexpr int g() { return f<int>(); } // #1 template<typename T> constexpr T f() { return 123; } int k[g()]; // #2 ``` To that end, we eagerly instantiate all referenced specializations of constexpr functions when they are defined. We maintain a map of (pattern, [instantiations]) independent of `PendingInstantiations` to avoid having to iterate that list after each function definition. We should apply the same logic to constexpr variables, but I wanted to keep the PR small. Fixes llvm#73232

… on (llvm#74207) lld string tail merging interacts badly with ASAN on Windows, as is reported in llvm#62078. A similar error was found when building LLVM with `-DLLVM_USE_SANITIZER=Address`: ```console [2/2] Building GenVT.inc... FAILED: include/llvm/CodeGen/GenVT.inc C:/Dev/llvm-project/Build_asan/include/llvm/CodeGen/GenVT.inc cmd.exe /C "cd /D C:\Dev\llvm-project\Build_asan && C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe -gen-vt -I C:/Dev/llvm-project/llvm/include/llvm/CodeGen -IC:/Dev/llvm-project/Build_asan/include -IC:/Dev/llvm-project/llvm/include C:/Dev/llvm-project/llvm/include/llvm/CodeGen/ValueTypes.td --write-if-changed -o include/llvm/CodeGen/GenVT.inc -d include/llvm/CodeGen/GenVT.inc.d" ================================================================= ==31944==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7ff6cff80d20 at pc 0x7ff6cfcc7378 bp 0x00e8bcb8e990 sp 0x00e8bcb8e9d8 READ of size 1 at 0x7ff6cff80d20 thread T0 #0 0x7ff6cfcc7377 in strlen (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1400a7377) #1 0x7ff6cfde50c2 in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401c50c2) #2 0x7ff6cfdd75ef in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401b75ef) #3 0x7ff6cfde59f9 in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1401c59f9) llvm#4 0x7ff6cff03f6c in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1402e3f6c) llvm#5 0x7ff6cfefbcbc in operator delete(void *, unsigned __int64) (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1402dbcbc) llvm#6 0x7ffb7f247343 (C:\WINDOWS\System32\KERNEL32.DLL+0x180017343) llvm#7 0x7ffb800826b0 (C:\WINDOWS\SYSTEM32\ntdll.dll+0x1800526b0) 0x7ff6cff80d20 is located 31 bytes after global variable '"#error \"ArgKind is not defined\"\n"...' defined in 'C:\Dev\llvm-project\llvm\utils\TableGen\IntrinsicEmitter.cpp' (0x7ff6cff80ce0) of size 33 '"#error \"ArgKind is not defined\"\n"...' is ascii string '#error "ArgKind is not defined" ' 0x7ff6cff80d20 is located 0 bytes inside of global variable '""' defined in 'C:\Dev\llvm-project\llvm\utils\TableGen\IntrinsicEmitter.cpp' (0x7ff6cff80d20) of size 1 '""' is ascii string '' SUMMARY: AddressSanitizer: global-buffer-overflow (C:\Dev\llvm-project\Build_asan\bin\llvm-min-tblgen.exe+0x1400a7377) in strlen Shadow bytes around the buggy address: 0x7ff6cff80a80: 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 01 f9 f9 f9 0x7ff6cff80b00: f9 f9 f9 f9 00 00 00 00 00 00 00 00 01 f9 f9 f9 0x7ff6cff80b80: f9 f9 f9 f9 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 0x7ff6cff80c00: 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 0x7ff6cff80c80: 00 00 00 00 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 =>0x7ff6cff80d00: 01 f9 f9 f9[f9]f9 f9 f9 00 00 00 00 00 00 00 00 0x7ff6cff80d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7ff6cff80f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==31944==ABORTING ``` This is reproducible with the 17.0.3 release: ```console $ clang-cl --version clang version 17.0.3 Target: x86_64-pc-windows-msvc Thread model: posix InstalledDir: C:\Program Files\LLVM\bin $ cmake -S llvm -B Build -G Ninja -DLLVM_USE_SANITIZER=Address -DCMAKE_C_COMPILER=clang-cl -DCMAKE_CXX_COMPILER=clang-cl -DCMAKE_MSVC_RUNTIME_LIBRARY=MultiThreaded -DCMAKE_BUILD_TYPE=Release $ cd Build $ ninja all ```

Internal builds of the unittests with msan flagged mempcpy_test. ==6862==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55e34d7d734a in length llvm-project/libc/src/__support/CPP/string_view.h:41:11 #1 0x55e34d7d734a in string_view llvm-project/libc/src/__support/CPP/string_view.h:71:24 #2 0x55e34d7d734a in __llvm_libc_9999_0_0_git::testing::Test::testStrEq(char const*, char const*, char const*, char const*, __llvm_libc_9999_0_0_git::testing::internal::Location) llvm-project/libc/test/UnitTest/LibcTest.cpp:284:13 #3 0x55e34d7d4e09 in LlvmLibcMempcpyTest_Simple::Run() llvm-project/libc/test/src/string/mempcpy_test.cpp:20:3 llvm#4 0x55e34d7d6dff in __llvm_libc_9999_0_0_git::testing::Test::runTests(char const*) llvm-project/libc/test/UnitTest/LibcTest.cpp:133:8 llvm#5 0x55e34d7d86e0 in main llvm-project/libc/test/UnitTest/LibcTestMain.cpp:21:10 SUMMARY: MemorySanitizer: use-of-uninitialized-value llvm-project/libc/src/__support/CPP/string_view.h:41:11 in length What's going on here is that mempcpy_test.cpp's Simple test is using ASSERT_STREQ with a partially initialized char array. ASSERT_STREQ calls Test::testStrEq which constructs a cpp:string_view. That constructor calls the private method cpp::string_view::length. When built with msan, the loop is transformed into multi-byte access, which then fails upon access. I took a look at libc++'s __constexpr_strlen which just calls __builtin_strlen(). Replacing the implementation of cpp::string_view::length with a call to __builtin_strlen() may still result in out of bounds access when the test is built with msan. It's not safe to use ASSERT_STREQ with a partially initialized array. Initialize the whole array so that the test passes.

We'd like a way to select the current thread by its thread ID (rather than its internal LLDB thread index). This PR adds a `-t` option (`--thread_id` long option) that tells the `thread select` command to interpret the `<thread-index>` argument as a thread ID. Here's an example of it working: ``` michristensen@devbig356 llvm/llvm-project (thread-select-tid) » ../Debug/bin/lldb ~/scratch/cpp/threading/a.out (lldb) target create "/home/michristensen/scratch/cpp/threading/a.out" Current executable set to '/home/michristensen/scratch/cpp/threading/a.out' (x86_64). (lldb) b 18 Breakpoint 1: where = a.out`main + 80 at main.cpp:18:12, address = 0x0000000000000850 (lldb) run Process 215715 launched: '/home/michristensen/scratch/cpp/threading/a.out' (x86_64) This is a thread, i=1 This is a thread, i=2 This is a thread, i=3 This is a thread, i=4 This is a thread, i=5 Process 215715 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select 2 * thread #2, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread info thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread list Process 215715 stopped thread #1: tid = 215715, 0x0000555555400850 a.out`main at main.cpp:18:12, name = 'a.out', stop reason = breakpoint 1.1 * thread #2: tid = 216047, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread #3: tid = 216048, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread llvm#4: tid = 216049, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread llvm#5: tid = 216050, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' thread llvm#6: tid = 216051, 0x00007ffff68f9918 libc.so.6`__nanosleep + 72, name = 'a.out' (lldb) thread select 215715 error: invalid thread #215715. (lldb) thread select -t 215715 * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x0000555555400850 a.out`main at main.cpp:18:12 15 for (int i = 0; i < 5; i++) { 16 pthread_create(&thread_ids[i], NULL, foo, NULL); 17 } -> 18 for (int i = 0; i < 5; i++) { 19 pthread_join(thread_ids[i], NULL); 20 } 21 return 0; (lldb) thread select -t 216051 * thread llvm#6, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select 3 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select -t 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) thread select --thread_id 216048 * thread #3, name = 'a.out' frame #0: 0x00007ffff68f9918 libc.so.6`__nanosleep + 72 libc.so.6`__nanosleep: -> 0x7ffff68f9918 <+72>: cmpq $-0x1000, %rax ; imm = 0xF000 0x7ffff68f991e <+78>: ja 0x7ffff68f9952 ; <+130> 0x7ffff68f9920 <+80>: movl %edx, %edi 0x7ffff68f9922 <+82>: movl %eax, 0xc(%rsp) (lldb) help thread select Change the currently selected thread. Syntax: thread select <cmd-options> <thread-index> Command Options Usage: thread select [-t] <thread-index> -t ( --thread_id ) Provide a thread ID instead of a thread index. This command takes options and free-form arguments. If your arguments resemble option specifiers (i.e., they start with a - or --), you must use ' -- ' between the end of the command options and the beginning of the arguments. (lldb) c Process 215715 resuming Process 215715 exited with status = 0 (0x00000000) ```

@0

…lvm#80904)" This reverts commit b1ac052. This commit breaks coroutine splitting for non-swift calling convention functions. In this example: ```ll ; ModuleID = 'repro.ll' source_filename = "stdlib/test/runtime/test_llcl.mojo" target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128" target triple = "x86_64-unknown-linux-gnu" @0 = internal constant { i32, i32 } { i32 trunc (i64 sub (i64 ptrtoint (ptr @craSH to i64), i64 ptrtoint (ptr getelementptr inbounds ({ i32, i32 }, ptr @0, i32 0, i32 1) to i64)) to i32), i32 64 } define dso_local void @af_suspend_fn(ptr %0, i64 %1, ptr %2) #0 { ret void } define dso_local void @craSH(ptr %0) #0 { %2 = call token @llvm.coro.id.async(i32 64, i32 8, i32 0, ptr @0) %3 = call ptr @llvm.coro.begin(token %2, ptr null) %4 = getelementptr inbounds { ptr, { ptr, ptr }, i64, { ptr, i1 }, i64, i64 }, ptr poison, i32 0, i32 0 %5 = call ptr @llvm.coro.async.resume() store ptr %5, ptr %4, align 8 %6 = call { ptr, ptr, ptr } (i32, ptr, ptr, ...) @llvm.coro.suspend.async.sl_p0p0p0s(i32 0, ptr %5, ptr @ctxt_proj_fn, ptr @af_suspend_fn, ptr poison, i64 -1, ptr poison) ret void } define dso_local ptr @ctxt_proj_fn(ptr %0) #0 { ret ptr %0 } ; Function Attrs: nomerge nounwind declare { ptr, ptr, ptr } @llvm.coro.suspend.async.sl_p0p0p0s(i32, ptr, ptr, ...) #1 ; Function Attrs: nounwind declare token @llvm.coro.id.async(i32, i32, i32, ptr) #2 ; Function Attrs: nounwind declare ptr @llvm.coro.begin(token, ptr writeonly) #2 ; Function Attrs: nomerge nounwind declare ptr @llvm.coro.async.resume() #1 attributes #0 = { "target-features"="+adx,+aes,+avx,+avx2,+bmi,+bmi2,+clflushopt,+clwb,+clzero,+crc32,+cx16,+cx8,+f16c,+fma,+fsgsbase,+fxsr,+invpcid,+lzcnt,+mmx,+movbe,+mwaitx,+pclmul,+pku,+popcnt,+prfchw,+rdpid,+rdpru,+rdrnd,+rdseed,+sahf,+sha,+sse,+sse2,+sse3,+sse4.1,+sse4.2,+sse4a,+ssse3,+vaes,+vpclmulqdq,+wbnoinvd,+x87,+xsave,+xsavec,+xsaveopt,+xsaves" } attributes #1 = { nomerge nounwind } attributes #2 = { nounwind } ``` This verifier crashes after the `coro-split` pass with ``` cannot guarantee tail call due to mismatched parameter counts musttail call void @af_suspend_fn(ptr poison, i64 -1, ptr poison) LLVM ERROR: Broken function PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. Stack dump: 0. Program arguments: opt ../../../reduced.ll -O0 #0 0x00007f1d89645c0e __interceptor_backtrace.part.0 /build/gcc-11-XeT9lY/gcc-11-11.4.0/build/x86_64-linux-gnu/libsanitizer/asan/../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:4193:28 #1 0x0000556d94d254f7 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:723:22 #2 0x0000556d94d19a2f llvm::sys::RunSignalHandlers() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Signals.cpp:105:20 #3 0x0000556d94d1aa42 SignalHandler(int) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/Unix/Signals.inc:371:36 llvm#4 0x00007f1d88e42520 (/lib/x86_64-linux-gnu/libc.so.6+0x42520) llvm#5 0x00007f1d88e969fc __pthread_kill_implementation ./nptl/pthread_kill.c:44:76 llvm#6 0x00007f1d88e969fc __pthread_kill_internal ./nptl/pthread_kill.c:78:10 llvm#7 0x00007f1d88e969fc pthread_kill ./nptl/pthread_kill.c:89:10 llvm#8 0x00007f1d88e42476 gsignal ./signal/../sysdeps/posix/raise.c:27:6 llvm#9 0x00007f1d88e287f3 abort ./stdlib/abort.c:81:7 llvm#10 0x0000556d8944be01 std::vector<llvm::json::Value, std::allocator<llvm::json::Value>>::size() const /usr/include/c++/11/bits/stl_vector.h:919:40 llvm#11 0x0000556d8944be01 bool std::operator==<llvm::json::Value, std::allocator<llvm::json::Value>>(std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&, std::vector<llvm::json::Value, std::allocator<llvm::json::Value>> const&) /usr/include/c++/11/bits/stl_vector.h:1893:23 llvm#12 0x0000556d8944be01 llvm::json::operator==(llvm::json::Array const&, llvm::json::Array const&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Support/JSON.h:572:69 llvm#13 0x0000556d8944be01 llvm::json::operator==(llvm::json::Value const&, llvm::json::Value const&) (.cold) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/JSON.cpp:204:28 llvm#14 0x0000556d949ed2bd llvm::report_fatal_error(char const*, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Support/ErrorHandling.cpp:82:70 llvm#15 0x0000556d8e37e876 llvm::SmallVectorBase<unsigned int>::size() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:91:32 llvm#16 0x0000556d8e37e876 llvm::SmallVectorTemplateCommon<llvm::DiagnosticInfoOptimizationBase::Argument, void>::end() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:282:41 llvm#17 0x0000556d8e37e876 llvm::SmallVector<llvm::DiagnosticInfoOptimizationBase::Argument, 4u>::~SmallVector() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallVector.h:1215:24 llvm#18 0x0000556d8e37e876 llvm::DiagnosticInfoOptimizationBase::~DiagnosticInfoOptimizationBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:413:7 llvm#19 0x0000556d8e37e876 llvm::DiagnosticInfoIROptimization::~DiagnosticInfoIROptimization() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:622:7 llvm#20 0x0000556d8e37e876 llvm::OptimizationRemark::~OptimizationRemark() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/DiagnosticInfo.h:689:7 llvm#21 0x0000556d8e37e876 operator() /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2213:14 llvm#22 0x0000556d8e37e876 emit<llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::CGSCCAnalysisManager&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&)::<lambda()> > /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/Analysis/OptimizationRemarkEmitter.h:83:12 llvm#23 0x0000556d8e37e876 llvm::CoroSplitPass::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroSplit.cpp:2212:13 llvm#24 0x0000556d8c36ecb1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::CoroSplitPass, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 llvm#25 0x0000556d91c1a84f llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:90:12 llvm#26 0x0000556d8c3690d1 llvm::detail::PassModel<llvm::LazyCallGraph::SCC, llvm::PassManager<llvm::LazyCallGraph::SCC, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&>::run(llvm::LazyCallGraph::SCC&, llvm::AnalysisManager<llvm::LazyCallGraph::SCC, llvm::LazyCallGraph&>&, llvm::LazyCallGraph&, llvm::CGSCCUpdateResult&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 llvm#27 0x0000556d91c2162d llvm::ModuleToPostOrderCGSCCPassAdaptor::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Analysis/CGSCCPassManager.cpp:278:18 llvm#28 0x0000556d8c369035 llvm::detail::PassModel<llvm::Module, llvm::ModuleToPostOrderCGSCCPassAdaptor, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 llvm#29 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 llvm#30 0x0000556d8e30979e llvm::CoroConditionalWrapper::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/lib/Transforms/Coroutines/CoroConditionalWrapper.cpp:19:74 llvm#31 0x0000556d8c365755 llvm::detail::PassModel<llvm::Module, llvm::CoroConditionalWrapper, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManagerInternal.h:91:3 llvm#32 0x0000556d9457abc5 llvm::PassManager<llvm::Module, llvm::AnalysisManager<llvm::Module>>::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&) /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/PassManager.h:247:20 llvm#33 0x0000556d89818556 llvm::SmallPtrSetImplBase::isSmall() const /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:196:33 llvm#34 0x0000556d89818556 llvm::SmallPtrSetImplBase::~SmallPtrSetImplBase() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:84:17 llvm#35 0x0000556d89818556 llvm::SmallPtrSetImpl<llvm::AnalysisKey*>::~SmallPtrSetImpl() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:321:7 llvm#36 0x0000556d89818556 llvm::SmallPtrSet<llvm::AnalysisKey*, 2u>::~SmallPtrSet() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/ADT/SmallPtrSet.h:427:7 llvm#37 0x0000556d89818556 llvm::PreservedAnalyses::~PreservedAnalyses() /home/ubuntu/modular/third-party/llvm-project/llvm/include/llvm/IR/Analysis.h:109:7 llvm#38 0x0000556d89818556 llvm::runPassPipeline(llvm::StringRef, llvm::Module&, llvm::TargetMachine*, llvm::TargetLibraryInfoImpl*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::ToolOutputFile*, llvm::StringRef, llvm::ArrayRef<llvm::PassPlugin>, llvm::ArrayRef<std::function<void (llvm::PassBuilder&)>>, llvm::opt_tool::OutputKind, llvm::opt_tool::VerifierKind, bool, bool, bool, bool, bool, bool, bool) /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/NewPMDriver.cpp:532:10 llvm#39 0x0000556d897e3939 optMain /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/optdriver.cpp:737:27 llvm#40 0x0000556d89455461 main /home/ubuntu/modular/third-party/llvm-project/llvm/tools/opt/opt.cpp:25:33 llvm#41 0x00007f1d88e29d90 __libc_start_call_main ./csu/../sysdeps/nptl/libc_start_call_main.h:58:16 llvm#42 0x00007f1d88e29e40 call_init ./csu/../csu/libc-start.c:128:20 llvm#43 0x00007f1d88e29e40 __libc_start_main ./csu/../csu/libc-start.c:379:5 llvm#44 0x0000556d897b6335 _start (/home/ubuntu/modular/.derived/third-party/llvm-project/build-relwithdebinfo-asan/bin/opt+0x150c335) Aborted (core dumped)

…ter partial ordering when determining primary template (llvm#82417) Consider the following: ``` struct A { static constexpr bool x = true; }; template<typename T, typename U> void f(T, U) noexcept(T::y); // #1, error: no member named 'y' in 'A' template<typename T, typename U> void f(T, U*) noexcept(T::x); // #2 template<> void f(A, int*) noexcept; // explicit specialization of #2 ``` We currently instantiate the exception specification of all candidate function template specializations when deducting template arguments for an explicit specialization, which results in a error despite `#1` not being selected by partial ordering as the most specialized template. According to [except.spec] p13: > An exception specification is considered to be needed when: > - [...] > - the exception specification is compared to that of another declaration (e.g., an explicit specialization or an overriding virtual function); Assuming that "comparing declarations" means "determining whether the declarations correspond and declare the same entity" (per [basic.scope.scope] p4 and [basic.link] p11.1, respectively), the exception specification does _not_ need to be instantiated until _after_ partial ordering, at which point we determine whether the implicitly instantiated specialization and the explicit specialization declare the same entity (the determination of whether two functions/function templates correspond does not consider the exception specifications). This patch defers the instantiation of the exception specification until a single function template specialization is selected via partial ordering, matching the behavior of GCC, EDG, and MSVC: see https://godbolt.org/z/Ebb6GTcWE.

…lvm#85653) This reverts commit daebe5c. This commit causes the following asan issue: ``` <snip>/llvm-project/build/bin/mlir-opt <snip>/llvm-project/mlir/test/Dialect/XeGPU/XeGPUOps.mlir | <snip>/llvm-project/build/bin/FileCheck <snip>/llvm-project/mlir/test/Dialect/XeGPU/XeGPUOps.mlir # executed command: <snip>/llvm-project/build/bin/mlir-opt <snip>/llvm-project/mlir/test/Dialect/XeGPU/XeGPUOps.mlir # .---command stderr------------ # | ================================================================= # | ==2772558==ERROR: AddressSanitizer: stack-use-after-return on address 0x7fd2c2c42b90 at pc 0x55e406d54614 bp 0x7ffc810e4070 sp 0x7ffc810e4068 # | READ of size 8 at 0x7fd2c2c42b90 thread T0 # | #0 0x55e406d54613 in operator()<long int const*> /usr/include/c++/13/bits/predefined_ops.h:318 # | #1 0x55e406d54613 in __count_if<long int const*, __gnu_cxx::__ops::_Iter_pred<mlir::verifyListOfOperandsOrIntegers(Operation*, llvm::StringRef, unsigned int, llvm::ArrayRef<long int>, ValueRange)::<lambda(int64_t)> > > /usr/include/c++/13/bits/stl_algobase.h:2125 # | #2 0x55e406d54613 in count_if<long int const*, mlir::verifyListOfOperandsOrIntegers(Operation*, ... ```

…oint. (llvm#83821)" This reverts commit c2c1e6e. It creates a use after free. ==8342==ERROR: AddressSanitizer: heap-use-after-free on address 0x50f000001760 at pc 0x55b9fb84a8fb bp 0x7ffc18468a10 sp 0x7ffc18468a08 READ of size 1 at 0x50f000001760 thread T0 #0 0x55b9fb84a8fa in dropPoisonGeneratingFlags llvm/lib/Transforms/Vectorize/VPlan.h:1040:13 #1 0x55b9fb84a8fa in llvm::VPlanTransforms::dropPoisonGeneratingRecipes(llvm::VPlan&, llvm::function_ref<bool (llvm::BasicBlock*)>)::$_0::operator()(llvm::VPRecipeBase*) const llvm/lib/Transforms/Vectorize/VPlanTransforms.cpp:1236:23 #2 0x55b9fb84a196 in llvm::VPlanTransforms::dropPoisonGeneratingRecipes(llvm::VPlan&, llvm::function_ref<bool (llvm::BasicBlock*)>) llvm/lib/Transforms/Vectorize/VPlanTransforms.cpp Can be reproduced with asan on Transforms/LoopVectorize/AArch64/sve-interleaved-masked-accesses.ll Transforms/LoopVectorize/X86/pr81872.ll Transforms/LoopVectorize/X86/x86-interleaved-accesses-masked-group.ll

...which caused issues like > ==42==ERROR: AddressSanitizer failed to deallocate 0x32 (50) bytes at address 0x117e0000 (error code: 28) > ==42==Cannot dump memory map on emscriptenAddressSanitizer: CHECK failed: sanitizer_common.cpp:81 "((0 && "unable to unmmap")) != (0)" (0x0, 0x0) (tid=288045824) > #0 0x14f73b0c in __asan::CheckUnwind()+0x14f73b0c (this.program+0x14f73b0c) > #1 0x14f8a3c2 in __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long)+0x14f8a3c2 (this.program+0x14f8a3c2) > #2 0x14f7d6e1 in __sanitizer::ReportMunmapFailureAndDie(void*, unsigned long, int, bool)+0x14f7d6e1 (this.program+0x14f7d6e1) > #3 0x14f81fbd in __sanitizer::UnmapOrDie(void*, unsigned long)+0x14f81fbd (this.program+0x14f81fbd) > llvm#4 0x14f875df in __sanitizer::SuppressionContext::ParseFromFile(char const*)+0x14f875df (this.program+0x14f875df) > llvm#5 0x14f74eab in __asan::InitializeSuppressions()+0x14f74eab (this.program+0x14f74eab) > llvm#6 0x14f73a1a in __asan::AsanInitInternal()+0x14f73a1a (this.program+0x14f73a1a) when trying to use an ASan suppressions file under Emscripten: Even though it would be considered OK by SUSv4, the Emscripten runtime states "We don't support partial munmapping" (see <emscripten-core/emscripten@f4115eb> "Implement MAP_ANONYMOUS on top of malloc in STANDALONE_WASM mode (llvm#16289)"). Co-authored-by: Stephan Bergmann <[email protected]>

…ication as used during partial ordering (llvm#91534) We do not deduce template arguments from the exception specification when determining the primary template of a function template specialization or when taking the address of a function template. Therefore, this patch changes `isAtLeastAsSpecializedAs` such that we do not mark template parameters in the exception specification as 'used' during partial ordering (per [temp.deduct.partial] p12) to prevent the following from being ambiguous: ``` template<typename T, typename U> void f(U) noexcept(noexcept(T())); // #1 template<typename T> void f(T*) noexcept; // #2 template<> void f<int>(int*) noexcept; // currently ambiguous, selects #2 with this patch applied ``` Although there is no corresponding wording in the standard (see core issue filed here cplusplus/CWG#537), this seems to be the intended behavior given the definition of _deduction substitution loci_ in [temp.deduct.general] p7 (and EDG does the same thing).

…erSize (llvm#67657)" This reverts commit f0b3654. This commit triggers UB by reading an uninitialized variable. `UP.PartialThreshold` is used uninitialized in `getUnrollingPreferences()` when it is called from `LoopVectorizationPlanner::executePlan()`. In this case the `UP` variable is created on the stack and its fields are not initialized. ``` ==8802==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x557c0b081b99 in llvm::BasicTTIImplBase<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/CodeGen/BasicTTIImpl.h #1 0x557c0b07a40c in llvm::TargetTransformInfo::Model<llvm::X86TTIImpl>::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) llvm-project/llvm/include/llvm/Analysis/TargetTransformInfo.h:2277:17 #2 0x557c0f5d69ee in llvm::TargetTransformInfo::getUnrollingPreferences(llvm::Loop*, llvm::ScalarEvolution&, llvm::TargetTransformInfo::UnrollingPreferences&, llvm::OptimizationRemarkEmitter*) const llvm-project/llvm/lib/Analysis/TargetTransformInfo.cpp:387:19 #3 0x557c0e6b96a0 in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7624:7 llvm#4 0x557c0e6e4b63 in llvm::LoopVectorizePass::processLoop(llvm::Loop*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10253:13 llvm#5 0x557c0e6f2429 in llvm::LoopVectorizePass::runImpl(llvm::Function&, llvm::ScalarEvolution&, llvm::LoopInfo&, llvm::TargetTransformInfo&, llvm::DominatorTree&, llvm::BlockFrequencyInfo*, llvm::TargetLibraryInfo*, llvm::DemandedBits&, llvm::AssumptionCache&, llvm::LoopAccessInfoManager&, llvm::OptimizationRemarkEmitter&, llvm::ProfileSummaryInfo*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10344:30 llvm#6 0x557c0e6f2f97 in llvm::LoopVectorizePass::run(llvm::Function&, llvm::AnalysisManager<llvm::Function>&) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:10383:9 [...] Uninitialized value was created by an allocation of 'UP' in the stack frame #0 0x557c0e6b961e in llvm::LoopVectorizationPlanner::executePlan(llvm::ElementCount, unsigned int, llvm::VPlan&, llvm::InnerLoopVectorizer&, llvm::DominatorTree*, bool, llvm::DenseMap<llvm::SCEV const*, llvm::Value*, llvm::DenseMapInfo<llvm::SCEV const*, void>, llvm::detail::DenseMapPair<llvm::SCEV const*, llvm::Value*>> const*) llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:7623:3 ```

…vm#90820) This solves some ambuguity introduced in P0522 regarding how template template parameters are partially ordered, and should reduce the negative impact of enabling `-frelaxed-template-template-args` by default. When performing template argument deduction, a template template parameter containing no packs should be more specialized than one that does. Given the following example: ```C++ template<class T2> struct A; template<template<class ...T3s> class TT1, class T4> struct A<TT1<T4>>; // #1 template<template<class T5 > class TT2, class T6> struct A<TT2<T6>>; // #2 template<class T1> struct B; template struct A<B<char>>; ``` Prior to P0522, candidate `#2` would be more specialized. After P0522, neither is more specialized, so this becomes ambiguous. With this change, `#2` becomes more specialized again, maintaining compatibility with pre-P0522 implementations. The problem is that in P0522, candidates are at least as specialized when matching packs to fixed-size lists both ways, whereas before, a fixed-size list is more specialized. This patch keeps the original behavior when checking template arguments outside deduction, but restores this aspect of pre-P0522 matching during deduction. --- Since this changes provisional implementation of CWG2398 which has not been released yet, and already contains a changelog entry, we don't provide a changelog entry here.

'reduction' has a few restrictions over normal 'var-list' clauses: 1- On parallel, a num_gangs can only have 1 argument when combined with reduction. These two aren't able to be combined on any other of the compute constructs however. 2- The vars all must be 'numerical data types' types of some sort, or a 'composite of numerical data types'. A list of types is given in the standard as a minimum, so we choose 'isScalar', which covers all of these types and keeps types that are actually numeric. Other compilers don't seem to implement the 'composite of numerical data types', though we do. 3- Because of the above restrictions, member-of-composite is not allowed, so any access via a memberexpr is disallowed. Array-element and sub-arrays (aka array sections) are both permitted, so long as they meet the requirements of #2. This patch implements all of these for compute constructs.

…llvm#92855) This solves some ambuguity introduced in P0522 regarding how template template parameters are partially ordered, and should reduce the negative impact of enabling `-frelaxed-template-template-args` by default. When performing template argument deduction, we extend the provisional wording introduced in llvm#89807 so it also covers deduction of class templates. Given the following example: ```C++ template <class T1, class T2 = float> struct A; template <class T3> struct B; template <template <class T4> class TT1, class T5> struct B<TT1<T5>>; // #1 template <class T6, class T7> struct B<A<T6, T7>>; // #2 template struct B<A<int>>; ``` Prior to P0522, `#2` was picked. Afterwards, this became ambiguous. This patch restores the pre-P0522 behavior, `#2` is picked again. This has the beneficial side effect of making the following code valid: ```C++ template<class T, class U> struct A {}; A<int, float> v; template<template<class> class TT> void f(TT<int>); // OK: TT picks 'float' as the default argument for the second parameter. void g() { f(v); } ``` --- Since this changes provisional implementation of CWG2398 which has not been released yet, and already contains a changelog entry, we don't provide a changelog entry here.

…arallel fusion llvm#94391 (llvm#97607)" This reverts commit edbc0e3. Reason for rollback. ASAN complains about this PR: ==4320==ERROR: AddressSanitizer: heap-use-after-free on address 0x502000006cd8 at pc 0x55e2978d63cf bp 0x7ffe6431c2b0 sp 0x7ffe6431c2a8 READ of size 8 at 0x502000006cd8 thread T0 #0 0x55e2978d63ce in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> mlir/include/mlir/IR/IRMapping.h:40:11 #1 0x55e2978d63ce in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:156:11 #2 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 #3 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 llvm#4 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 llvm#5 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 llvm#6 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 llvm#7 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 llvm#8 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 llvm#9 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 llvm#10 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 llvm#11 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 llvm#12 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 llvm#13 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 llvm#14 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 llvm#15 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 llvm#16 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#17 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#18 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 llvm#19 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 llvm#20 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 llvm#21 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 llvm#22 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 llvm#23 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 llvm#24 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 llvm#25 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 llvm#26 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#27 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#28 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 llvm#29 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 llvm#30 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 llvm#31 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 llvm#32 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 llvm#33 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 llvm#34 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 llvm#35 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 llvm#36 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) llvm#37 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 0x502000006cd8 is located 8 bytes inside of 16-byte region [0x502000006cd0,0x502000006ce0) freed by thread T0 here: #0 0x55e29130b7e2 in operator delete(void*, unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:155:3 #1 0x55e2979eb657 in __libcpp_operator_delete<void *, unsigned long> #2 0x55e2979eb657 in __do_deallocate_handle_size<> #3 0x55e2979eb657 in __libcpp_deallocate llvm#4 0x55e2979eb657 in deallocate llvm#5 0x55e2979eb657 in deallocate llvm#6 0x55e2979eb657 in operator() llvm#7 0x55e2979eb657 in ~vector llvm#8 0x55e2979eb657 in mlir::Block::~Block() mlir/lib/IR/Block.cpp:24:1 llvm#9 0x55e2979ebc17 in deleteNode llvm/include/llvm/ADT/ilist.h:42:39 llvm#10 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:205:5 llvm#11 0x55e2979ebc17 in erase llvm/include/llvm/ADT/ilist.h:209:39 llvm#12 0x55e2979ebc17 in mlir::Block::erase() mlir/lib/IR/Block.cpp:67:28 llvm#13 0x55e297aef978 in mlir::RewriterBase::eraseBlock(mlir::Block*) mlir/lib/IR/PatternMatch.cpp:245:10 llvm#14 0x55e297af0563 in mlir::RewriterBase::inlineBlockBefore(mlir::Block*, mlir::Block*, llvm::ilist_iterator<llvm::ilist_detail::node_options<mlir::Operation, false, false, void, false, void>, false, false>, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:331:3 llvm#15 0x55e297af06d8 in mlir::RewriterBase::mergeBlocks(mlir::Block*, mlir::Block*, mlir::ValueRange) mlir/lib/IR/PatternMatch.cpp:341:3 llvm#16 0x55e297036608 in mlir::scf::ForOp::replaceWithAdditionalYields(mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) mlir/lib/Dialect/SCF/IR/SCF.cpp:575:12 llvm#17 0x55e2970673ca in mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Model<mlir::scf::ForOp>::replaceWithAdditionalYields(mlir::detail::LoopLikeOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::RewriterBase&, mlir::ValueRange, bool, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)> const&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.h.inc:658:56 llvm#18 0x55e2978d5feb in replaceWithAdditionalYields blaze-out/k8-opt-asan/bin/mlir/include/mlir/Interfaces/LoopLikeInterface.cpp.inc:105:14 llvm#19 0x55e2978d5feb in mlir::createFused(mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface, mlir::RewriterBase&, std::__u::function<llvm::SmallVector<mlir::Value, 6u> (mlir::OpBuilder&, mlir::Location, llvm::ArrayRef<mlir::BlockArgument>)>, llvm::function_ref<void (mlir::RewriterBase&, mlir::LoopLikeOpInterface, mlir::LoopLikeOpInterface&, mlir::IRMapping)>) mlir/lib/Interfaces/LoopLikeInterface.cpp:135:14 llvm#20 0x55e2952a614b in mlir::fuseIndependentSiblingForLoops(mlir::scf::ForOp, mlir::scf::ForOp, mlir::RewriterBase&) mlir/lib/Dialect/SCF/Utils/Utils.cpp:1398:43 llvm#21 0x55e291480c6f in mlir::transform::LoopFuseSiblingOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/SCF/TransformOps/SCFTransformOps.cpp:482:17 llvm#22 0x55e29149ed5e in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::LoopFuseSiblingOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 llvm#23 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 llvm#24 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 llvm#25 0x55e294646a8d in applySequenceBlock(mlir::Block&, mlir::transform::FailurePropagationMode, mlir::transform::TransformState&, mlir::transform::TransformResults&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:1788:15 llvm#26 0x55e29464f927 in mlir::transform::NamedSequenceOp::apply(mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) mlir/lib/Dialect/Transform/IR/TransformOps.cpp:2155:10 llvm#27 0x55e2945d28ee in mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Model<mlir::transform::NamedSequenceOp>::apply(mlir::transform::detail::TransformOpInterfaceInterfaceTraits::Concept const*, mlir::Operation*, mlir::transform::TransformRewriter&, mlir::transform::TransformResults&, mlir::transform::TransformState&) blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.h.inc:477:56 llvm#28 0x55e297494a60 in apply blaze-out/k8-opt-asan/bin/mlir/include/mlir/Dialect/Transform/Interfaces/TransformInterfaces.cpp.inc:61:14 llvm#29 0x55e297494a60 in mlir::transform::TransformState::applyTransform(mlir::transform::TransformOpInterface) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:953:48 llvm#30 0x55e2974a5fe2 in mlir::transform::applyTransforms(mlir::Operation*, mlir::transform::TransformOpInterface, mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>> const&, mlir::transform::TransformOptions const&, bool) mlir/lib/Dialect/Transform/Interfaces/TransformInterfaces.cpp:2016:16 llvm#31 0x55e2945888d7 in mlir::transform::applyTransformNamedSequence(mlir::RaggedArray<llvm::PointerUnion<mlir::Operation*, mlir::Attribute, mlir::Value>>, mlir::transform::TransformOpInterface, mlir::ModuleOp, mlir::transform::TransformOptions const&) mlir/lib/Dialect/Transform/Transforms/TransformInterpreterUtils.cpp:234:10 llvm#32 0x55e294582446 in (anonymous namespace)::InterpreterPass::runOnOperation() mlir/lib/Dialect/Transform/Transforms/InterpreterPass.cpp:147:16 llvm#33 0x55e2978e93c6 in operator() mlir/lib/Pass/Pass.cpp:527:17 llvm#34 0x55e2978e93c6 in void llvm::function_ref<void ()>::callback_fn<mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int)::$_1>(long) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#35 0x55e2978e207a in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#36 0x55e2978e207a in executeAction<mlir::PassExecutionAction, mlir::Pass &> mlir/include/mlir/IR/MLIRContext.h:275:7 llvm#37 0x55e2978e207a in mlir::detail::OpToOpPassAdaptor::run(mlir::Pass*, mlir::Operation*, mlir::AnalysisManager, bool, unsigned int) mlir/lib/Pass/Pass.cpp:521:21 llvm#38 0x55e2978e5fbf in runPipeline mlir/lib/Pass/Pass.cpp:593:16 llvm#39 0x55e2978e5fbf in mlir::PassManager::runPasses(mlir::Operation*, mlir::AnalysisManager) mlir/lib/Pass/Pass.cpp:904:10 llvm#40 0x55e2978e5b65 in mlir::PassManager::run(mlir::Operation*) mlir/lib/Pass/Pass.cpp:884:60 llvm#41 0x55e291ebb460 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:408:17 llvm#42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 llvm#43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 llvm#44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 llvm#47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 llvm#48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 llvm#49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 llvm#50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 llvm#51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 previously allocated by thread T0 here: #0 0x55e29130ab5d in operator new(unsigned long) compiler-rt/lib/asan/asan_new_delete.cpp:86:3 #1 0x55e2979ed5d4 in __libcpp_operator_new<unsigned long> #2 0x55e2979ed5d4 in __libcpp_allocate #3 0x55e2979ed5d4 in allocate llvm#4 0x55e2979ed5d4 in __allocate_at_least<std::__u::allocator<mlir::BlockArgument> > llvm#5 0x55e2979ed5d4 in __split_buffer llvm#6 0x55e2979ed5d4 in mlir::BlockArgument* std::__u::vector<mlir::BlockArgument, std::__u::allocator<mlir::BlockArgument>>::__push_back_slow_path<mlir::BlockArgument const&>(mlir::BlockArgument const&) llvm#7 0x55e2979ec0f2 in push_back llvm#8 0x55e2979ec0f2 in mlir::Block::addArgument(mlir::Type, mlir::Location) mlir/lib/IR/Block.cpp:154:13 llvm#9 0x55e29796e457 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2172:34 llvm#10 0x55e29796e457 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 llvm#11 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 llvm#12 0x55e297035742 in mlir::scf::ForOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/SCF/IR/SCF.cpp:521:14 llvm#13 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 llvm#14 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 llvm#15 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#16 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#17 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 llvm#18 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 llvm#19 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 llvm#20 0x55e297971d20 in parseBlockBody mlir/lib/AsmParser/Parser.cpp:2296:9 llvm#21 0x55e297971d20 in (anonymous namespace)::OperationParser::parseBlock(mlir::Block*&) mlir/lib/AsmParser/Parser.cpp:2226:12 llvm#22 0x55e29796e4f5 in parseRegionBody mlir/lib/AsmParser/Parser.cpp:2184:7 llvm#23 0x55e29796e4f5 in (anonymous namespace)::OperationParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:2121:7 llvm#24 0x55e29796b25e in (anonymous namespace)::CustomOpAsmParser::parseRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1785:16 llvm#25 0x55e29796b2cf in (anonymous namespace)::CustomOpAsmParser::parseOptionalRegion(mlir::Region&, llvm::ArrayRef<mlir::OpAsmParser::Argument>, bool) mlir/lib/AsmParser/Parser.cpp:1796:12 llvm#26 0x55e2978d89ff in mlir::function_interface_impl::parseFunctionOp(mlir::OpAsmParser&, mlir::OperationState&, bool, mlir::StringAttr, llvm::function_ref<mlir::Type (mlir::Builder&, llvm::ArrayRef<mlir::Type>, llvm::ArrayRef<mlir::Type>, mlir::function_interface_impl::VariadicFlag, std::__u::basic_string<char, std::__u::char_traits<char>, std::__u::allocator<char>>&)>, mlir::StringAttr, mlir::StringAttr) mlir/lib/Interfaces/FunctionImplementation.cpp:232:14 llvm#27 0x55e2969ba41d in mlir::func::FuncOp::parse(mlir::OpAsmParser&, mlir::OperationState&) mlir/lib/Dialect/Func/IR/FuncOps.cpp:203:10 llvm#28 0x55e291322c18 in llvm::ParseResult llvm::detail::UniqueFunctionBase<llvm::ParseResult, mlir::OpAsmParser&, mlir::OperationState&>::CallImpl<llvm::ParseResult (*)(mlir::OpAsmParser&, mlir::OperationState&)>(void*, mlir::OpAsmParser&, mlir::OperationState&) llvm/include/llvm/ADT/FunctionExtras.h:220:12 llvm#29 0x55e29795bea3 in operator() llvm/include/llvm/ADT/FunctionExtras.h:384:12 llvm#30 0x55e29795bea3 in callback_fn<llvm::unique_function<llvm::ParseResult (mlir::OpAsmParser &, mlir::OperationState &)> > llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#31 0x55e29795bea3 in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#32 0x55e29795bea3 in parseOperation mlir/lib/AsmParser/Parser.cpp:1521:9 llvm#33 0x55e29795bea3 in parseCustomOperation mlir/lib/AsmParser/Parser.cpp:2017:19 llvm#34 0x55e29795bea3 in (anonymous namespace)::OperationParser::parseOperation() mlir/lib/AsmParser/Parser.cpp:1174:10 llvm#35 0x55e297959b78 in parse mlir/lib/AsmParser/Parser.cpp:2725:20 llvm#36 0x55e297959b78 in mlir::parseAsmSourceFile(llvm::SourceMgr const&, mlir::Block*, mlir::ParserConfig const&, mlir::AsmParserState*, mlir::AsmParserCodeCompleteContext*) mlir/lib/AsmParser/Parser.cpp:2785:41 llvm#37 0x55e29790d5c2 in mlir::parseSourceFile(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::Block*, mlir::ParserConfig const&, mlir::LocationAttr*) mlir/lib/Parser/Parser.cpp:46:10 llvm#38 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp, const std::__u::shared_ptr<llvm::SourceMgr> &> mlir/include/mlir/Parser/Parser.h:159:14 llvm#39 0x55e291ebbfe2 in parseSourceFile<mlir::ModuleOp> mlir/include/mlir/Parser/Parser.h:189:10 llvm#40 0x55e291ebbfe2 in mlir::parseSourceFileForTool(std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::ParserConfig const&, bool) mlir/include/mlir/Tools/ParseUtilities.h:31:12 llvm#41 0x55e291ebb263 in performActions(llvm::raw_ostream&, std::__u::shared_ptr<llvm::SourceMgr> const&, mlir::MLIRContext*, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:383:33 llvm#42 0x55e291ebabd9 in processBuffer mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:481:9 llvm#43 0x55e291ebabd9 in operator() mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:548:12 llvm#44 0x55e291ebabd9 in llvm::LogicalResult llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>::callback_fn<mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&)::$_0>(long, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&) llvm/include/llvm/ADT/STLFunctionalExtras.h:45:12 llvm#45 0x55e297b1cffe in operator() llvm/include/llvm/ADT/STLFunctionalExtras.h:68:12 llvm#46 0x55e297b1cffe in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef)::$_0::operator()(llvm::StringRef) const mlir/lib/Support/ToolUtilities.cpp:86:16 llvm#47 0x55e297b1c9c5 in interleave<const llvm::StringRef *, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), (lambda at llvm/include/llvm/ADT/STLExtras.h:2147:49), void> llvm/include/llvm/ADT/STLExtras.h:2125:3 llvm#48 0x55e297b1c9c5 in interleave<llvm::SmallVector<llvm::StringRef, 8U>, (lambda at mlir/lib/Support/ToolUtilities.cpp:79:23), llvm::raw_ostream, llvm::StringRef> llvm/include/llvm/ADT/STLExtras.h:2147:3 llvm#49 0x55e297b1c9c5 in mlir::splitAndProcessBuffer(std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::function_ref<llvm::LogicalResult (std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, llvm::raw_ostream&)>, llvm::raw_ostream&, llvm::StringRef, llvm::StringRef) mlir/lib/Support/ToolUtilities.cpp:89:3 llvm#50 0x55e291eb0cf0 in mlir::MlirOptMain(llvm::raw_ostream&, std::__u::unique_ptr<llvm::MemoryBuffer, std::__u::default_delete<llvm::MemoryBuffer>>, mlir::DialectRegistry&, mlir::MlirOptMainConfig const&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:551:10 llvm#51 0x55e291eb115c in mlir::MlirOptMain(int, char**, llvm::StringRef, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:589:14 llvm#52 0x55e291eb15f8 in mlir::MlirOptMain(int, char**, llvm::StringRef, mlir::DialectRegistry&) mlir/lib/Tools/mlir-opt/MlirOptMain.cpp:605:10 llvm#53 0x55e29130d1be in main mlir/tools/mlir-opt/mlir-opt.cpp:311:33 llvm#54 0x7fbcf3fff3d3 in __libc_start_main (/usr/grte/v5/lib64/libc.so.6+0x613d3) (BuildId: 9a996398ce14a94560b0c642eb4f6e94) llvm#55 0x55e2912365a9 in _start /usr/grte/v5/debug-src/src/csu/../sysdeps/x86_64/start.S:120 SUMMARY: AddressSanitizer: heap-use-after-free mlir/include/mlir/IR/IRMapping.h:40:11 in map<llvm::MutableArrayRef<mlir::BlockArgument> &, llvm::MutableArrayRef<mlir::BlockArgument>, nullptr> Shadow bytes around the buggy address: 0x502000006a00: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006a80: fa fa 00 fa fa fa 00 00 fa fa 00 00 fa fa 00 00 0x502000006b00: fa fa 00 00 fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006b80: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 00 0x502000006c00: fa fa 00 00 fa fa 00 00 fa fa 00 00 fa fa fd fa =>0x502000006c80: fa fa fd fa fa fa fd fd fa fa fd[fd]fa fa fd fd 0x502000006d00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006d80: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa 0x502000006e00: fa fa 00 fa fa fa 00 fa fa fa 00 00 fa fa 00 fa 0x502000006e80: fa fa 00 fa fa fa 00 00 fa fa 00 fa fa fa 00 fa 0x502000006f00: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==4320==ABORTING

This test is currently flaky on a local Windows amd64 build. The reason is that it relies on the order of `process.threads` but this order is nondeterministic: If we print lldb's inputs and outputs while running, we can see that the breakpoints are always being set correctly, and always being hit: ```sh runCmd: breakpoint set -f "main.c" -l 2 output: Breakpoint 1: where = a.out`func_inner + 1 at main.c:2:9, address = 0x0000000140001001 runCmd: breakpoint set -f "main.c" -l 7 output: Breakpoint 2: where = a.out`main + 17 at main.c:7:5, address = 0x0000000140001021 runCmd: run output: Process 52328 launched: 'C:\workspace\llvm-project\llvm\build\lldb-test-build.noindex\functionalities\unwind\zeroth_frame\TestZerothFrame.test_dwarf\a.out' (x86_64) Process 52328 stopped * thread #1, stop reason = breakpoint 1.1 frame #0: 0x00007ff68f6b1001 a.out`func_inner at main.c:2:9 1 void func_inner() { -> 2 int a = 1; // Set breakpoint 1 here ^ 3 } 4 5 int main() { 6 func_inner(); 7 return 0; // Set breakpoint 2 here ``` However, sometimes the backtrace printed in this test shows that the process is stopped inside NtWaitForWorkViaWorkerFactory from `ntdll.dll`: ```sh Backtrace at the first breakpoint: frame #0: 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 frame #1: 0x00007ffecc74585e ntdll.dll`RtlClearThreadWorkOnBehalfTicket + 862 frame #2: 0x00007ffecc3e257d kernel32.dll`BaseThreadInitThunk + 29 frame #3: 0x00007ffecc76af28 ntdll.dll`RtlUserThreadStart + 40 ``` When this happens, the test fails with an assertion error that the stopped thread's zeroth frame's current line number does not match the expected line number. This is because the test is looking at the wrong thread: `process.threads[0]`. If we print the list of threads each time the test is run, we notice that threads are sometimes in a different order, within `process.threads`: ```sh Thread 0: thread llvm#4: tid = 0x9c38, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #2: tid = 0xa950, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 2: thread #1: tid = 0xab18, 0x00007ff64bc81001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 3: thread #3: tid = 0xc514, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 0: thread #3: tid = 0x018c, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 1: thread #1: tid = 0x85c8, 0x00007ff7130c1001 a.out`func_inner at main.c:2:9, stop reason = breakpoint 1.1 Thread 2: thread #2: tid = 0xf344, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 Thread 3: thread llvm#4: tid = 0x6a50, 0x00007ffecc7b3bf4 ntdll.dll`NtWaitForWorkViaWorkerFactory + 20 ``` Use `self.thread()` to consistently select the correct thread, instead. Co-authored-by: kendal <[email protected]>

…izations of function templates to USRGenerator (llvm#98027) Given the following: ``` template<typename T> struct A { void f(int); // #1 template<typename U> void f(U); // #2 template<> void f<int>(int); // #3 }; ``` Clang will generate the same USR for `#1` and `#2`. This patch fixes the issue by including the template arguments of dependent class scope explicit specializations in their USRs.

dstutt and others added 30 commits October 10, 2019 14:25

[AMDGPU] Temporarily disabled immarg check in verifier

2635ffd

LLPC has .ll file library functions that break this verifier check. We need to fix those before re-enabling the check. Change-Id: I4c000793a805a50f1d91d1ae55c567a356e72519

[AMDGPU] Add Wave32 Support to Scratch Bounds Checking Pass

cd87f1a

Implement appropriate register allocation and exec mask usage for wave32 scenarios. Change-Id: I844018f6c07fdda46366af51654017fb4b654d8a

[AMDGCN] Support wave32/64 in waterfall intrinsics

6efb5e0

Extended test to check wave32 and gfx10 Change-Id: I620c6d9e737ddccdfd3494abf72632d7ecc4a53f

[AMDGPU] Fix getDwordOffset in buffer mem merging pass

dcf74f4

Change-Id: I3557477344135f7dbece33a2945bcb9f4063c10f

Merge MIMG instructions

dc3170a

Extend LoadStoreOptimizer to handle IMAGE_LOAD and IMAGE_SAMPLE. Change-Id: Id49c992b9781254e39e1352125f5ffb212fe4f24

Fixed "Merge MIMG instructions"

ce17a44

Fix a breakage in areMemAccessesTriviallyDisjoint, caused by trying to merge a non-load MIMG instruction IMAGE_GET_RESINFO. Only MIMG that loads from memory should be considered. Change-Id: I012435534b3e6161ee7feb686d4711097d2ab980

Reinstate "AMDGPU: Be explicit about whether the high-word in SI_PC_A…

d702c00

…DD_REL_OFFSET is 0" This reverts commit ad3ea6fe0eedc9fe48b96453cfed51f8c1dd79de.

gfx10 atomic opt test fixup

c62b84d

Change-Id: I3dddc18d5dea0fd1050633e35d0ac463a9ed26ca

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ELF note types for LLPC cache hash #2

ELF note types for LLPC cache hash #2

jaebaek commented Jan 21, 2021

ELF note types for LLPC cache hash #2

Are you sure you want to change the base?

ELF note types for LLPC cache hash #2

Conversation

jaebaek commented Jan 21, 2021