Code Examples for AURIX™ Development Studio

More than hundreds of code examples are available for AURIX™ devices in this repository.
Each code example is made up of two parts: the source code and the corresponding tutorial.

To import a code example into AURIX™ Development Studio, follow the guide at the end on this page.

NOTE: For any question or request, please use the dedicated Infineon AURIX™ forum.

Topics

The code examples in this repository cover at least the following topics, divided by macro category:

Communication Protocols	Data Handling	Timers	Analog/Digital Signals	CPU Management	Alarms, Interrupts and Resets
ASCLIN module handling for LIN, UART and SPI	Flexible CRC Engine control	Capture and Compare Unit control	Versatile Analog-to-Digital converter control	Assembly code execution	Device Reset type trigger and detection
Ethernet communication	Input-Output Monitor control	Clock System	Delta-Sigma Analog-to-Digital converter control	Code execution from SRAM	Interrupt handling
I2C communication	BUS register protection	General Purpose Timer control	GPIO port control	Performance registers usage	Safety Management Unit control
CAN communication	Memory Protection control	Generic Timer Module control		Power Management System control
SPI communication	Data and Program Flash programming	System Timer Module control		Multicore
	DMA control			Trap recognition
	Memory test			Watchdog handling

Source code

The source code of each code example is based on Infineon Low Level Drivers (iLLDs), for which the documentation can be found on this webpage.

Each code example is provided with a comment section called "metadata" in the Cpu0_Main.c file, which include:

• Title: the title of the code example
• Abstract: a short description of the example’s scope
• Description: a detailed description of the example’s scope
• Name: the example’s univocal name
• Version: the version number of the example (V<major changes>.<minor changes>.<bugfixes> e.g. V1.0.2)
• Board: a list of boards supported by the code
• Keywords: a list of keywords used to ease the search
• Documents: a list of links to documents useful for the code example
• Last Updated: date of the last modification

e.g.:

Name

The name of each code example follows a specific naming scheme:

• <Code name>_<ID number>_<Board short name>
• <Framework>_<Board short name>_ADS_<Code name>

e.g. : ADC_Filtering_1_KIT_TC375_LK e.g. : iLLD_TC375_ADS_Blinky_LED_CPP

where:

• The code name summarizes in a couple of words the scope and the module used in the example
• The ID number is an identification number for the example scope (If the same scope would be achieved using different code, then the two code examples would be called _1 and _2 in order to differentiate them)
• The board short name describes which board the example code has been developed for (using board-specific port pins such as LED, communication, etc.)
• The framework indicates the software framework used: "iLLD" for Infineon Low Level Drivers or "BMETAL" for Bare Metal implementations

Board

The code examples supports the following types of boards:

• Aggiungere triboard

In particular, the following boards are supported:

AURIX™ TC2xx Boards	AURIX™ TC3xx Boards	AURIX™ TC4xx Boards
KIT_AURIX_TC234_TFT	KIT_A2G_TC334_LITE	KIT_A2G_TC4D7_LITE
KIT_AURIX_TC237_TFT	KIT_A2G_TC367_5V_TFT
KIT_AURIX_TC265_TFT	KIT_A2G_TC375_ARD_SB
KIT_AURIX_TC275_ARD_SB	KIT_A2G_TC375_LITE
KIT_AURIX_TC275_LITE	KIT_A2G_TC377_5V_TFT
KIT_AURIX_TC277_TFT	KIT_A2G_TC387_5V_TFT
KIT_AURIX_TC297_TFT	KIT_A2G_TC397_5V_TFT
	KIT_A2G_TC3xx_5V_TRB_S

Tutorial

The code examples provide tutorials in one of two different formats

• PDF
• README.md

Code Examples with PDF tutorial

PDF tutorial can be downloaded directly by following the link inside the metadata in the Source Code.

Each tutorial contains the following information:

• Summary: An abstract and a detailed description of the example's scope
• Introduction: A generic introduction on the used module and its main features
• Hardware: The used hardware and how to configure it
• Implementation: A detailed explanation of how to implement the module's configuration using iLLDs and exploits their features
• Run and Test: The steps to follow to make sure the code is working properly and interact with it
• References: Useful links

Code Examples with README.md tutorial

README.md is provided within the project. This file is automatically opened when the code example is imported into AURIX™ Development Studio, giving you immediate access to the documentation alongside the source code.

• Abstract: An abstract and a detailed description of the example's scope
• Device: The device used in the code example
• Board: The board used for testing the code example
• Scope of work: A generic introduction on the used module and its main features
• Hardware setup: The used hardware and how to configure it
• Implementation: A detailed explanation of how to implement the module's configuration using iLLDs and exploits their features
• Compiling and programming: The steps to build and flash the programm in the board
• Run and Test: The steps to follow to make sure the code is working properly and interact with it
• References: Useful links

How To Import

To import a code example, use the dedicated import function in AURIX™ Development Studio: File >> Import... >> Infineon >> "AURIX Development Studio Project", select "Infineon Code Examples Repository" and select the code example to be imported.

The same result can be achieved by clicking on "Import AURIX Project" in the Quick Links view of AURIX™ Development Studio: