Skip to content

High performance C heatmap generation library. Supposed to be wrapped by higher-level languages.

License

Notifications You must be signed in to change notification settings

J-Sai/libheatmap

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

44 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

heatmap

High performance C heatmap generation library.

Not your typical website-user-focus-heatmap library! (Even-though it might be abused for that purpose due to the high performance.)

Deaths of the third international

Note: While the library is fully functional and thoroughly tested, the best possible performance has not been attained yet. I'm still trying out various optimizations in other branches every now-and-then. See Tuning below.

What exactly?

This is a simple, low-level, high-performance heatmap creation library written in C. The reason it is written in C is that it is intended to be easily wrapped and/or called from higher-level languages.

So, what's in here? (Buzzword-list incoming)

  • Creation of arbitrarily-sized heatmaps.
  • The heatmaps can be either normalized or saturated.
  • Comes with gorgeous colorschemes, but you can also use your own.
  • You can declare custom stamps for more artistic freedom.
  • Efficient support for weighted datapoints.
  • It's all strict ANSI C89 packed into a single .h/.c tandem that you can simply drop into your project and start using (MIT licensed).
  • It comes with extensive unit-tests and ran through valgrind; it is thus more likely to contain less bugs, or so they say.
  • It has been thoroughly benchmarked, assuring you high performance.

What's not in there, which might be present in other heatmap packages?

  • It doesn't automatically size your heatmap according to your data. This means you need to know the min/max of your datapoints beforehand.
  • It doesn't generate image files. You read that right - it doesn't generate image files. What it does generate is pixel-data, which you can then store into an image file, upload to a server, upload to a GPU texture, or feed to your cat. Well maybe not all of these.
  • When there's roughly more points than pixels on the map, the current algorithm is not optimal. I'll add a better one in the future; let me know if you need it.
  • It also doesn't take care of your grandparents/children.

What the hell, no image file creation?

Yep. This library is meant to be embedded in larger things or used from higher- level languages, all of which have their own image file creation idiosyncracies. I love tiny, self-contained libraries that play well (i.e. simply don't play) with their environment.

If you really, really want to generate png images from C and don't already have any means to do so (what kind of weirdo are you, anyways?), go ahead and use some one-file image library such as the awesome LodePNG. That's actually what is being done in all of the examples.

Why? (When there is so many others)

The short answer is because I can. While investigating data from DOTA2 replay files, I wanted to generate heatmaps of the players' positions at various events. None of the heatmap libraries I have tried satisfied my needs; they were either too unflexible or too slow. (I wanted to process thousands of games with thousands of points per game.) Of course, this library is both flexible and highly efficient :)

The main packages I played with (I will definitely have missed some) are:

  • heatmap.py, which:
    • Doesn't normalize! It only saturates.
    • Doesn't allow a custom colorscheme, and only comes with 5 ugly ones.
    • Doesn't allow for custom stamps.
  • heatmap.js, which:
    • Is great, use that if you can!
    • But only for the browser, and
    • too slow when millions of points are involved.
  • Your favourite dataviz library, such as
    • matplotlib of which I couldn't find this kind of heatmap,
    • R let's not go into that...,
    • a whole bunch of closed-source monsters, but
    • none of these is as easy-to-use, fast, and gorgeous as I want it.

Stop talking, show me how to use it!

Gladly!

Using without programming

If you just run make, all examples in the examples subdirectory will be compiled. One of those examples is actually quite useful: It creates a heatmap using coordinate-pairs it reads from the standard input and writes the resulting heatmap-picture to the standard output. The intended usage is the following:

$ head -6 points.txt
12 123
52 12
321 94
87 483
60 10
90 470

$ examples/heatmap_gen 500 500 10 < points.txt > heatmap.png

This will generate a heatmap.png picture using the points from the file. The first two arguments (500) are the width and height of the heatmap picture and the third argument (which is optional) is the radius of the stamp.

Or, in order to have a useless use of cat:

$ cat points.txt | examples/heatmap_gen 500 500 10 > heatmap.png

The colorscheme can be chosen as a last argument. Run examples/heatmap_gen -l to get a list of available colorschemes and browse them in this demo of colorschemes.

For example, the heatmap you saw in the introduction has been created with the following monster command:

$ edith/build/edith replays/fountainhooks.dem | cut -d , -f 3- | awk ' !x[$0]++' | python3 edith/cvt.py | heatmap-github/examples/heatmap_gen `identify -format "%w %h" dota2map.png` 150 Spectral_mixed > deathmap.png

A companion binary to this one is examples/heatmap_gen_weighted, which works exactly the same, except that all points need to come with a third value specifying the point's weight as a floating-point number, e.g.:

head -6 weighted_points.txt
12 123 3.0
52 12 1.0
321 94 1.0
87 483 1.5
60 10 0.5
90 470 1.234

But let's now look at using the library programmatically.

Installing

Since the library consists of only one header and one C file, installation is pretty straightforward: just drop the files into your project!

For using it from other higher-level languages, you'll need to run make and place the resulting libheatmap.so where your language expects it to be and then use your language's C bindings to call its functions.

The idea is that people (or I) will write language-specific wrappers and setup files (like setup.py, Rakefile, cgo, etc.) to make that easier.

The basics

A basic usage example is called simplest and is provided in many different programming languages in the examples directory. Here are some for your reading pleasure:

In C++

#include <random>
#include <vector>
#include <iostream>

#include "lodepng.h"
#include "heatmap.h"

int main()
{
    static const size_t w = 256, h = 512, npoints = 1000;

    // Create the heatmap object with the given dimensions (in pixel).
    heatmap_t* hm = heatmap_new(w, h);

    // This creates two normal random distributions which will give us random points.
    std::random_device rd;
    std::mt19937 prng(rd());
    std::normal_distribution<float> x_distr(0.5f*w, 0.5f/3.0f*w), y_distr(0.5f*h, 0.25f*h);

    // Add a bunch of random points to the heatmap now.
    for(unsigned i = 0 ; i < npoints ; ++i) {
        heatmap_add_point(hm, x_distr(prng), y_distr(prng));
    }

    // This creates an image out of the heatmap.
    // `image` now contains the image data in 32-bit RGBA.
    std::vector<unsigned char> image(w*h*4);
    heatmap_render_default_to(hm, &image[0]);

    // Now that we've got a finished heatmap picture, we don't need the map anymore.
    heatmap_free(hm);

    // Finally, we use the fantastic lodepng library to save it as an image.
    if(unsigned error = lodepng::encode("heatmap.png", image, w, h)) {
        std::cerr << "encoder error " << error << ": "<< lodepng_error_text(error) << std::endl;
        return 1;
    }

    return 0;
}

In Python

Using ctypes and PIL for now, hopefully a wrapper soon.

#!/usr/bin/env python

from os.path import join as pjoin, dirname
from random import gauss
from ctypes import CDLL, c_ulong, c_ubyte
import Image

w, h, npoints = 256, 512, 1000

# Load the heatmap library using ctypes
libhm = CDLL(pjoin(dirname(__file__), '..', 'libheatmap.so'))

# Here, we describe the signatures of the various functions.
# TBH, I'm not sure why this is necessary nowadays whereas it wasn't in the past.
# If someone knows, please explain in a Github issue, or a PR to here!
libhm.heatmap_new.argtypes = [c_ulong, c_ulong]
libhm.heatmap_new.restype = c_void_p
libhm.heatmap_add_point.argtypes = [c_void_p, c_ulong, c_ulong]
libhm.heatmap_render_default_to.argtypes = [c_void_p, POINTER(c_ubyte)]
libhm.heatmap_free.argtypes = [c_void_p]

# Create the heatmap object with the given dimensions (in pixel).
hm = libhm.heatmap_new(w, h)

# Add a bunch of random points to the heatmap now.
for x, y in ((int(gauss(w*0.5, w/6.0)), int(gauss(h*0.5, h/6.0))) for _ in xrange(npoints)):
    libhm.heatmap_add_point(hm, c_ulong(x), c_ulong(y))

# This creates an image out of the heatmap.
# `rawimg` now contains the image data in 32-bit RGBA.
rawimg = (c_ubyte*(w*h*4))()
libhm.heatmap_render_default_to(hm, rawimg)

# Now that we've got a finished heatmap picture, we don't need the map anymore.
libhm.heatmap_free(hm)

# Use the PIL (for example) to make a png file out of that.
img = Image.frombuffer('RGBA', (w, h), rawimg, 'raw', 'RGBA', 0, 1)
img.save('heatmap.png')

Using a different colorscheme

While the default colorscheme is gorgeous, it might not fit every situation. A few more colorschemes are shipped as addons to this library in the colorschemes directory; you'll have to drop those you want to use into your project too.

After that, it's just a matter of calling a different rendering function:

#include <colorschemes/gray.h>

// ...

heatmap_render_to(hm, heatmap_cs_b2w, &image[0]);

Shipped colorschemes

(Almost) All colorschemes shipped along with this library come in four variants: discrete, soft, mixed, and mixed_exp. While the former three just produce different visual styles, the last one has a meaning to his life. Sometimes, while your heatmap comes with an intense peak at a few locations, that peak is not what you want to show; you also want to see the texture of the non-peaked regions. In such a case, you could either use the saturating render function if you know a good saturation value, or you use the mixed_exp variant of your favorite colorscheme and hope it looks good.

The four variants of the default "Spectral" colorscheme

The variable-name of a colorscheme follows the heatmap_cs_NAME_VARIANT pattern, where NAME is the name in the overview picture above and VARIANT is one of discrete, soft, mixed, and mixed_exp.

I have created a page to preview all shipped colorschemes.

Using weighted datapoints

In some applications, the datapoints come with associated weights, which encode some kind of importance of that point. A weighted point can be added to the heatmap using the heatmap_add_weighted_point and heatmap_add_weighted_point_with_stamp functions which take an additional weight parameter after x and y. The weight may be any non-negative floating- point value.

Adding a point with a weight of 3.0 has exactly the same effect as adding that point three times without a weight, but is (almost) as efficient as adding a single unweighted point. In addition, weights allow for arbitrary weighting (heh) such as 0.123, which wouldn't be possible by repeatedly adding unweighted points.

Weighted and unweighted points can be mixed arbitrarily using the API.

More advanced stuff

Rendering with saturation instead of normalization

TODO: Explain this! Basically, instead of mapping the max to the last color in the scheme and renormalizing, a saturation constant is used. This can be useful for suppressing extreme peaks/outliers or for keeping a constant intensity distribution across multiple heatmaps, e.g. when creating frames for an animation.

Creating a custom colorscheme

If none of the shipped colorschemes satisfies you, it is quite easy to create your own. A colorscheme is simply an array of RGBA values. The first four values of the array are the RGBA values for the coldest heatmap value and the last four are the RGBA values for the hottest heatmap value.

You'll usually want to have a fully transparent color like (0, 0, 0, 0) as first color in the scheme, such that empty spots on the heatmap will be transparent.

static unsigned char awesome_greens_data[] = {
      0,   0,   0,   0,
    241, 247, 238, 255,
    213, 230, 204, 255,
    185, 214, 170, 255,
    156, 197, 135, 255,
    128, 180, 101, 255,
    102, 155,  75, 255,
     79, 121,  58, 255,
     57,  87,  41, 255,
     34,  52,  25, 255,
     12,  18,   8, 255,
    121,  58,  79, 255, // I'll top it off with a red for peaks.
};

heatmap_colorscheme_t* awesome_greens = heatmap_colorscheme_load(awesome_greens_data, 12);

// Instead of hard-coding the 12, you could also use the sizeof-operator, but
// don't forget to divide by 4, since the number of colors and not the number
// of array elements is needed:
// sizeof(awesome_greens_data)/sizeof(awesome_greens_data)/4

// Note that the data has been copied. If `awesome_greens_data` was loaded
// dynamically (e.g. from an image), it could now be deleted.

// ...
heatmap_render_to(hm, awesome_greens, &image[0]);
// ...

heatmap_colorscheme_free(awesome_greens);

If you feel adventurous, you may also bypass the colorscheme management functions and use the raw structure right away. Note that if you choose to do so, future updates might break your code.

// awesome_greens_data = ...
heatmap_colorscheme_t awesome_greens = {
    awesome_greens_data, sizeof(awesome_greens_data)/sizeof(awesome_greens_data[0])/4
};

Using the gradientgen.go tool

The gradientgen.go is a tool which assists you in the creation of the four variants of a colorscheme. (It's based on my go-colorful library, check it out if you're a go hacker working with colors!)

You need to pass the discrete colors in hex format and their "positions" between 0.0 and 1.0 as argument list. The awesome_greens from above could be generated, including its variants, with the following lengthy command:

go run gradientgen.go colorscheme.go -name awesome_greens '#F1F7EE' 0.0 '#D5E6CC' 0.1 '#B9D6AA' 0.2 '#9CC587' 0.3 '#80B465' 0.4 '#669B4B' 0.5 '#4F793A' 0.6 '#395729' 0.7 '#223419' 0.8 '#0C1208' 0.9 '#793A4F' 1.0

This will generate all four variants of awesome_greens in the files awesome_greens.h and awesome_greens.c, as well as a png image for each variant. You can specify the dimensions of the png images through the -w and -h parameters; the latter also defines how fine-grained the colorscheme will be, as it's the size of the array.

go run gradientgen.go colorscheme.go -name awesome_greens -w 100 -h 100 '#F1F7EE' 0.0 ...

Using non-default stamps

Depending on your data, heatmap size and personal preference of banana shapes, the default stamp might not lead to best results. For example, if you want to create a huge-resolution picture (say 16k x 16k, you might cut it into pieces and overlay it to a google-maps style web-viewer), the tiny default stamp will not cover enough space and your heatmap will look more like a scatterplot, or worse!

Example of a huge heatmap with the default stamp

You have just witnessed an example of this happening. Yes, right above this paragraph; it wasn't wasted empty space, there was a heatmap! Although I scaled it down to 512x512 not to explode your browser, you can have a look at the original huge heatmap if you are brave enough.

If that is your case, you'll have to use a differently-sized stamp. Fortunately for you, libheatmap provides such a function: heatmap_stamp_gen. Here are the relevant parts of the full sample code that fixes the problem in the previous picture:

// ...

// We definitely need a larger stamp for this huge-ass resolution!
// A radius of 128 means we'll get a (2*128+1)²=257² pixel stamp.
heatmap_stamp_t* stamp = heatmap_stamp_gen(128);

// ...

for(unsigned i = 0 ; i < npoints ; ++i) {
    // Notice the special function to specify the stamp.
    heatmap_add_point_with_stamp(hm, x_distr(prng), y_distr(prng), stamp);
}

// ...

The resulting heatmap looks much better. (Note, though, that for reasons of filesize I have stored it as .jpg, losing transparency as well as some quality.)

Funky stamps

Sometimes the artist within you just wants to play. But we are hackers, so the best we can usually do is some programmer art but worry not, this is better!

The stamps are actually just images with floating-point valued pixels which are then added onto the heatmap, so there is no reason they should be round and linear! You can load any arbitrary stamp using the heatmap_stamp_load function which, just like for heatmap_colorscheme_load, will make a copy of the data.

heatmap_stamp_gen_nonlinear is a utility function making it easy to generate circular stamps. You give it a function which it will call for all pixels, passing it the pixel's distance from the stamp center. One minus the value that your function returns will be the stamp's pixel value. Here are some examples:

auto stamp = heatmap_stamp_gen_nonlinear(10, [](float d){return d*d;});
auto stamp = heatmap_stamp_gen_nonlinear(10, [](float d){return sqrtf(d);});

Some variants of this, including a grayscale representation of the stamp and the formula leading to it, are shown in the picture below:

Heatmaps with various kinds of custom stamps

The full code for creating these stamps and leading to these heatmaps can be found in the examples directory too.

Note: There is also example code for creating custom stamps in python.

FAQ

The rendering to PNG is slow!

That's most likely because you're using LodePNG. I'm using it in the examples because it is very easy to use and thus doesn't distract from the main point of the example. This convenience comes at a price: speed. LodePNG is quite a bit slower than an optimized PNG library such as libpng, which I'd recommend for use in production. Since creating png files isn't needed by most hobby-games, there aren't many tutorials of that on the net. Because of this, I provided an example of writing a png file using libpng in examples/simplest_libpng.cpp. It is about 4x faster than the very same example using LodePNG.

The example is not built by default such that it doesn't block compilation on systems which don't have libpng-dev installed. To compile the example, do run make examples/simplest_libpng_cpp.

Tuning

The library is currently tuned for both of the following use-cases:

  • Creating a huge heatmap with medium "density".
  • Creating a lot of small heatmaps per second.

Although it is fast, it could be much faster for creating very dense heatmaps where there are (roughly) more datapoints than pixels. This is because the library currently keeps track of a heatmap's max while rendering a datapoint. This max-tracking makes SIMD-optimizations useless. (Pull-requests proving the opposite are welcome!)

If finding the maximum was postponed to rendering, the whole heatmap would have to be walked twice each rendering: first for finding the max, then for rendering. This sounds bad, but for those cases in which many points are added to the heatmap, but the map is only rendered once, it would allow to speed-up the point-addition significantly: No more need for max-test, and thus pure bit-blt, which can easily be SIMD-ed!

License: MIT

Copyright (c) 2013 Lucas Beyer

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

High performance C heatmap generation library. Supposed to be wrapped by higher-level languages.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 96.3%
  • C++ 1.9%
  • Go 1.5%
  • Makefile 0.3%