A boilerplate project for getting started with LILYGO's T-Display-S3 using the PlatformIO IDE, Arduino framework, and LVGL graphics library.
Features:
- Takes care of initializing the hardware.
- Uses the local RAM for a twin framebuffer setup with DMA, and Espressif's LCD driver APIs for the highest display throughput.
- Initializes the external PSRAM where it allocates LVGL's working memory.
- Mounts the internal flash as a storage medium and makes it available to LVLG as the "F:" drive.
- Maps hardware keys to an LVGL keypad input device with "Up", "Down" and "Enter" key events.
- Provides battery voltage readings in millivolts with an API call.
- Uses the latest version of LVGL. (v9.1.0)
Partiotion Table:
The 16MB flash is partitioned as follows, there are 20KBs of space allocated as nvs key-value storage, an otadata partition, and two app partitions defined, 2.93MBs each so that OTA updates can be supported as well. Finally, 10.92MBs of space is allocated to the storage partition available to the user to work with.
| Name | Type | SubType | Offset | Size |
|---|---|---|---|---|
| nvs | data | nvs | 0x9000 | 0x5000 |
| otadata | data | ota | 0xe000 | 0x2000 |
| app0 | app | ota_0 | 0x10000 | 0x2f0000 |
| app1 | app | ota_1 | 0x300000 | 0x2f0000 |
| storage | data | spiffs | 0x5f0000 | 0xa10000 |
It is as easy as inheriting from the application class and overriding on_create and on_update methods.
Check out the example.cpp file, It's a simple physics simulation application provided to help as a starting point and as an artificial load for testing.
Note: As mentioned, this example utilizes Espressif's Storage API, so if you're building from source don't forget to build and upload the filesystem image as well before the first use.
Got your board at hand? Download the latest release and flash online via ESP Tool. Use the provided offsets.json file to specify which address to flash each bin file to.