Richardjm/picam corner (VoronDesign#424)

* Working picam mount with the best field of vision

* A little documentation

* Probably won't work on VSW, but maybe Trident

* Reduce image size and make jpg

* Fix typo

* Make link relative

printer_mods/README.md

@@ -218,6 +218,7 @@ like so:
 | revnull | [Raspberry Pi 7inch Display Mount](./revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
 |Rhastlyn |[Wansview 1080p Camera Mount](./Rhastlyn/WansviewCameraMount) |A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion | :x: |:grey_question: |:heavy_check_mark: |:x:|
 | |[60mm Fan Cover](./Rhastlyn/60mmFanCover)|A easy to install cover for spec 60mm fans originally designed for a 2.4 build| :x: |:grey_question: |:heavy_check_mark: |:x:|
+| richardjm | [Picam corner mount](./richardjm/picam-corner) | Out of the way corner mounted picam | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: |
 | roboticator24 | [Touchscreen for OctoDash](./roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 panel to allow you to run the amazing OctoDash touch UI | :x: | :x: | :heavy_check_mark: |:x:|
 | rngSplat | [Printable Switchwire Deck Plate](./rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | :x: | :x: | :x: | :heavy_check_mark: |
 | rsheng118 | [BTT octopus DIN vertical mount](./rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | :x: | :x: | :heavy_check_mark: | :x: |

printer_mods/richardjm/picam-corner/README.md

@@ -0,0 +1,13 @@
+# Picam corner mount
+
+About the only place I found to mount the picam with a view low down
+of the bed. This was inspired by the [v0 design by xbst](../../xbst_/V0_Picam)
+
+## Hardware
+
+- A single m3x8 bolt and t-nut
+- A suitable length of picam ribbon cable
+
+![The view](Images/TheView.jpg)
+
+![The mounting point](Images/TheMountingPoint.jpg)