mesa_modbus: Re-arrange files for Debian packaging

.gitignore

@@ -21,6 +21,7 @@ share/menus/CNC.menu
 share/desktop-directories/linuxcnc-cnc.directory
 share/desktop-directories/linuxcnc-ref.directory
 share/desktop-directories/linuxcnc-doc.directory
+share/linuxcnc/mesa_modbus.c.tmpl
 src/modules.order
 /configs/*/emc.nml
 !/configs/common/emc.nml

debian/linuxcnc-dev.files

@@ -0,0 +1,12 @@
+usr/include/linuxcnc/*.hh
+usr/include/linuxcnc/*.h
+usr/lib/*.a
+usr/lib/*.so
+usr/share/man/man1/halcompile.1
+usr/share/man/man3/*
+usr/bin/halcompile
+usr/bin/modcompile
+usr/share/linuxcnc/mesa_modbus.c.tmpl
+usr/share/doc/linuxcnc-dev/*
+usr/share/linuxcnc/Makefile.modinc
+usr/realtime-4.19.195-rtai-amd64/modules/linuxcnc/Module.symvers

debian/linuxcnc-uspace-dev.install

@@ -1,7 +1,9 @@
 usr/bin/halcompile
+usr/bin/modcompile
 usr/include/linuxcnc
 usr/lib/liblinuxcnc.a
 usr/lib/*.so
 usr/share/linuxcnc/Makefile.modinc
+usr/share/linuxcnc/mesa_modbus.c.tmpl
 usr/share/man/man1/halcompile.1
 usr/share/man/man3

debian/linuxcnc.install

@@ -0,0 +1,263 @@
+etc
+
+usr/bin/5axisgui
+usr/bin/axis
+usr/bin/axis-remote
+usr/bin/classicladder
+usr/bin/debuglevel
+usr/bin/elbpcom
+usr/bin/genserkins
+usr/bin/gladevcp
+usr/bin/gladevcp_demo
+usr/bin/gmoccapy
+usr/bin/gremlin_view
+usr/bin/gs2_vfd
+usr/bin/gscreen
+usr/bin/hal-histogram
+usr/bin/hal_input
+usr/bin/hal_manualtoolchange
+usr/bin/halcmd
+usr/bin/halcmd_twopass
+usr/bin/halmeter
+usr/bin/halreport
+usr/bin/halrmt
+usr/bin/halrun
+usr/bin/halsampler
+usr/bin/halscope
+usr/bin/halshow
+usr/bin/halstreamer
+usr/bin/haltcl
+usr/bin/halui
+usr/bin/hbmgui
+usr/bin/hexagui
+usr/bin/hy_gt_vfd
+usr/bin/hy_vfd
+usr/bin/image-to-gcode
+usr/bin/inivar
+usr/bin/io
+usr/bin/iov2
+usr/bin/latency-histogram
+usr/bin/latency-plot
+usr/bin/latency-test
+usr/bin/lineardelta
+usr/bin/linuxcnc
+usr/bin/linuxcnc_info
+usr/bin/linuxcnc_module_helper
+usr/bin/linuxcnc_var
+usr/bin/linuxcnclcd
+usr/bin/linuxcncmkdesktop
+usr/bin/linuxcncrsh
+usr/bin/linuxcncsvr
+usr/bin/linuxcnctop
+usr/bin/maho600gui
+usr/bin/max5gui
+usr/bin/mb2hal
+usr/bin/mdi
+usr/bin/melfagui
+usr/bin/milltask
+usr/bin/millturngui
+usr/bin/mitsub_vfd
+usr/bin/z_level_compensation
+usr/bin/monitor-xhc-hb04
+usr/bin/motion-logger
+usr/bin/moveoff_gui
+usr/bin/ngcgui
+usr/bin/panelui
+usr/bin/pi500_vfd
+usr/bin/pmx485
+usr/bin/pmx485-test
+usr/bin/pncconf
+usr/bin/puma560gui
+usr/bin/pumagui
+usr/bin/pyngcgui
+usr/bin/pyui
+usr/bin/pyvcp
+usr/bin/pyvcp_demo
+usr/bin/qtplasmac-cfg2prefs
+usr/bin/qtplasmac-materials
+usr/bin/qtplasmac-plasmac2qt
+usr/bin/qtplasmac_gcode
+usr/bin/qtvcp
+usr/bin/rotarydelta
+usr/bin/rs274
+usr/bin/rtapi_app
+usr/bin/scaragui
+usr/bin/schedrmt
+usr/bin/scorbot-er-3
+usr/bin/sendkeys
+usr/bin/shuttle
+usr/bin/sim-torch
+usr/bin/sim_pin
+usr/bin/simulate_probe
+usr/bin/stepconf
+usr/bin/svd-ps_vfd
+usr/bin/teach-in
+usr/bin/thermistor
+usr/bin/tool_mmap_read
+usr/bin/tool_watch
+usr/bin/tooledit
+usr/bin/touchy
+usr/bin/update_ini
+usr/bin/vfdb_vfd
+usr/bin/vfs11_vfd
+usr/bin/wj200_vfd
+usr/bin/xhc-hb04
+usr/bin/xhc-hb04-accels
+usr/bin/xhc-whb04b-6
+usr/bin/xyzac-trt-gui
+usr/bin/xyzbc-trt-gui
+
+usr/lib/lib*.so.*
+usr/lib/linuxcnc
+usr/lib/python3
+usr/lib/tcltk
+
+usr/share/axis
+usr/share/glade3
+usr/share/gmoccapy
+usr/share/gscreen
+usr/share/gtksourceview-2.0
+
+usr/share/applications/linuxcnc.desktop
+usr/share/applications/linuxcnc-latency.desktop
+usr/share/applications/linuxcnc-latency-histogram.desktop
+usr/share/applications/linuxcnc-pncconf.desktop
+usr/share/applications/linuxcnc-stepconf.desktop
+
+usr/share/linuxcnc/gremlin_view.ui
+usr/share/linuxcnc/gscreen2.glade
+usr/share/linuxcnc/gscreen.glade
+usr/share/linuxcnc/hallib/
+usr/share/linuxcnc/linuxcnc_big.nml
+usr/share/linuxcnc/linuxcnc.gif
+usr/share/linuxcnc/linuxcncicon.png
+usr/share/linuxcnc/linuxcnc.nml
+usr/share/linuxcnc/linuxcnc-wizard.gif
+usr/share/linuxcnc/ncfiles/
+usr/share/linuxcnc/pncconf/
+usr/share/linuxcnc/popupkeyboard.ui
+usr/share/linuxcnc/stepconf/
+usr/share/linuxcnc/touchy.glade
+
+usr/share/locale
+
+usr/share/man/man1/5axisgui.1
+usr/share/man/man1/axis.1
+usr/share/man/man1/axis-remote.1
+usr/share/man/man1/debuglevel.1
+usr/share/man/man1/elbpcom.1
+usr/share/man/man1/gladevcp.1
+usr/share/man/man1/gladevcp_demo.1
+usr/share/man/man1/gmoccapy.1
+usr/share/man/man1/gremlin_view.1
+usr/share/man/man1/gs2_vfd.1
+usr/share/man/man1/gscreen.1
+usr/share/man/man1/halcmd.1
+usr/share/man/man1/halcmd_twopass.1
+usr/share/man/man1/hal-histogram.1
+usr/share/man/man1/hal_input.1
+usr/share/man/man1/hal_manualtoolchange.1
+usr/share/man/man1/halmeter.1
+usr/share/man/man1/hal_parport.1
+usr/share/man/man1/halreport.1
+usr/share/man/man1/halrmt.1
+usr/share/man/man1/halrun.1
+usr/share/man/man1/halsampler.1
+usr/share/man/man1/halscope.1
+usr/share/man/man1/halshow.1
+usr/share/man/man1/halstreamer.1
+usr/share/man/man1/haltcl.1
+usr/share/man/man1/halui.1
+usr/share/man/man1/hbmgui.1
+usr/share/man/man1/hexagui.1
+usr/share/man/man1/hy_gt_vfd.1
+usr/share/man/man1/hy_vfd.1
+usr/share/man/man1/image-to-gcode.1
+usr/share/man/man1/inivar.1
+usr/share/man/man1/io.1
+usr/share/man/man1/iocontrol.1
+usr/share/man/man1/iov2.1
+usr/share/man/man1/latency-histogram.1
+usr/share/man/man1/latency-plot.1
+usr/share/man/man1/latency-test.1
+usr/share/man/man1/lineardelta.1
+usr/share/man/man1/linuxcnc.1
+usr/share/man/man1/linuxcnc_info.1
+usr/share/man/man1/linuxcnclcd.1
+usr/share/man/man1/linuxcncmkdesktop.1
+usr/share/man/man1/linuxcnc_module_helper.1
+usr/share/man/man1/linuxcncrsh.1
+usr/share/man/man1/linuxcncsvr.1
+usr/share/man/man1/linuxcnctop.1
+usr/share/man/man1/linuxcnc_var.1
+usr/share/man/man1/maho600gui.1
+usr/share/man/man1/max5gui.1
+usr/share/man/man1/mb2hal.1
+usr/share/man/man1/mdi.1
+usr/share/man/man1/mdro.1
+usr/share/man/man1/milltask.1
+usr/share/man/man1/mitsub_vfd.1
+usr/share/man/man1/monitor-xhc-hb04.1
+usr/share/man/man1/motion-logger.1
+usr/share/man/man1/moveoff_gui.1
+usr/share/man/man1/ngcgui.1
+usr/share/man/man1/panelui.1
+usr/share/man/man1/pi500_vfd.1
+usr/share/man/man1/pmx485.1
+usr/share/man/man1/pmx485-test.1
+usr/share/man/man1/pncconf.1
+usr/share/man/man1/puma560gui.1
+usr/share/man/man1/pumagui.1
+usr/share/man/man1/pyngcgui.1
+usr/share/man/man1/pyui.1
+usr/share/man/man1/pyvcp.1
+usr/share/man/man1/pyvcp_demo.1
+usr/share/man/man1/qtplasmac-cfg2prefs.1
+usr/share/man/man1/qtplasmac-materials.1
+usr/share/man/man1/qtplasmac-plasmac2qt.1
+usr/share/man/man1/qtplasmac-setup.1
+usr/share/man/man1/qtvcp.1
+usr/share/man/man1/rotarydelta.1
+usr/share/man/man1/rs274.1
+usr/share/man/man1/rtapi_app.1
+usr/share/man/man1/scaragui.1
+usr/share/man/man1/schedrmt.1
+usr/share/man/man1/scorbot-er-3.1
+usr/share/man/man1/sendkeys.1
+usr/share/man/man1/shuttle.1
+usr/share/man/man1/sim_pin.1
+usr/share/man/man1/sim-torch.1
+usr/share/man/man1/simulate_probe.1
+usr/share/man/man1/stepconf.1
+usr/share/man/man1/svd-ps_vfd.1
+usr/share/man/man1/teach-in.1
+usr/share/man/man1/thermistor.1
+usr/share/man/man1/tooledit.1
+usr/share/man/man1/touchy.1
+usr/share/man/man1/update_ini.1
+usr/share/man/man1/vfdb_vfd.1
+usr/share/man/man1/vfs11_vfd.1
+usr/share/man/man1/wj200_vfd.1
+usr/share/man/man1/xhc-hb04.1
+usr/share/man/man1/xhc-hb04-accels.1
+usr/share/man/man1/xhc-whb04b-6.1
+usr/share/man/man1/xyzac-trt-gui.1
+usr/share/man/man1/xyzbc-trt-gui.1
+
+usr/share/man/man9
+
+usr/share/qtvcp
+
+src/emc/usr_intf/axis/etc    usr/share/doc/linuxcnc/axis
+src/emc/usr_intf/axis/README usr/share/doc/linuxcnc/axis
+
+debian/linuxcnc-uspace.metainfo.xml usr/share/metainfo
+
+debian/extras/etc /
+debian/extras/lib /
+
+debian/extras/usr/share/icons usr/share
+
+debian/extras/usr/share/desktop-directories/linuxcnc-cnc.directory usr/share/desktop-directories
+debian/extras/usr/share/desktop-directories/linuxcnc-doc.directory usr/share/desktop-directories
+debian/extras/usr/share/desktop-directories/linuxcnc-ref.directory usr/share/desktop-directories

docs/src/drivers/mesa_modbus.adoc

@@ -293,13 +293,13 @@ necessary except in the special case of the 'modcompile all' command,
 which will compile and install all .mod files in the current directory.
 
 ----
-modcompile my_file.mod
+sudo modcompile my_file.mod
 ----
 
 or
 
 ----
-modcompile all
+sudo modcompile all
 ----
 
 "modcompile" is provided by the "linuxcnc-dev" package.

src/Makefile

@@ -766,6 +766,8 @@ install-kernel-indep: install-dirs
 
 	$(FILE) ../share/gtksourceview-2.0/language-specs/*.lang  $(DESTDIR)$(datadir)/gtksourceview-2.0/language-specs/
 
+	$(FILE) ../src/hal/drivers/mesa-hostmot2/modbus/*.tmpl  $(DESTDIR)$(prefix)/share/linuxcnc/
+
 install-kernel-indep: install-python
 install-python: install-dirs
 	$(DIR) $(DESTDIR)$(SITEPY) $(DESTDIR)$(SITEPY)/rs274

src/hal/drivers/mesa-hostmot2/modbus/modcompile → src/hal/drivers/mesa-hostmot2/modbus/modcompile.py

@@ -1,4 +1,4 @@
-#! /usr/bin/env python3
+#!/usr/bin/python3
 
 #    Build Realtime Modbus modules to use the Mesa FPGA card PktUART
 
@@ -42,8 +42,7 @@ def find_modinc():
     global modinc
     if modinc: return modinc
     d = os.path.abspath(os.path.dirname(os.path.dirname(sys.argv[0])))
-    for e in ['%s/src' % os.environ["EMC2_HOME"], 'etc/linuxcnc',
-              '/etc/linuxcnc', 'share/linuxcnc']:
+    for e in ['src', 'etc/linuxcnc', '/etc/linuxcnc', 'share/linuxcnc']:
         e = os.path.join(d, e, 'Makefile.modinc')
         if os.path.exists(e):
             modinc = e
@@ -59,17 +58,19 @@ def find_modinc():
     names = [sys.argv[1]]
 
 tempdir = tempfile.mkdtemp()
+BASE = os.path.abspath(os.path.join(os.path.dirname(sys.argv[0]), ".."))
 print(os.path.join(tempdir, "mesa_modbus.c"))
-os.symlink(os.path.join(os.path.abspath("."), "mesa_modbus.c"), os.path.join(tempdir, "mesa_modbus.c"))
+os.symlink(os.path.join(BASE, "share", "linuxcnc", "mesa_modbus.c.tmpl"), os.path.join(tempdir, "mesa_modbus.c"))
 for f in names:
+    b = os.path.splitext(os.path.basename(f))[0]
     # The module definition is #included as mesa_modbus.h
     m = open(os.path.join(tempdir, "Makefile"), "w")
-    print("obj-m += %s.o" % os.path.splitext(f)[0],file=m)
-    print("%s-objs:=mesa_modbus.o" % os.path.splitext(f)[0],file=m)
+    print("obj-m += %s.o" % b,file=m)
+    print("%s-objs:=mesa_modbus.o" % b,file=m)
     print("include %s" % find_modinc(), file=m)
-    print("EXTRA_CFLAGS += -I%s" % os.path.abspath('.'), file=m)
-    print("EXTRA_CFLAGS += -DMODFILE=%s" % f, file=m)
-    print("EXTRA_CFLAGS += -D_COMP_NAME_=%s" % os.path.splitext(f)[0], file=m)
+    print("EXTRA_CFLAGS += -I%s" % tempdir, file=m)
+    print("EXTRA_CFLAGS += -DMODFILE=%s" % os.path.abspath(f), file=m)
+    print("EXTRA_CFLAGS += -D_COMP_NAME_=%s" % b, file=m)
     m.close()
     os.system("touch mesa_modbus.c") # Force a recompile
     result = os.system("cd %s && make -S modules install" % tempdir)

src/hal/utils/Submakefile

@@ -96,7 +96,16 @@ endif
 	$(ECHO) Copying python script $(notdir $@)
 	$(Q)(echo '#!$(PYTHON)'; sed '1 { /^#!/d; }' $<) > [email protected] && chmod +x [email protected] && mv -f [email protected] $@
 
-TARGETS += ../bin/halcompile ../bin/elbpcom
+../bin/modcompile: ../bin/%: hal/drivers/mesa-hostmot2/modbus/%.py
+	@$(ECHO) Syntax checking python script $(notdir $@)
+	$(Q)$(PYTHON) -m py_compile $<
+	$(ECHO) Copying python script $(notdir $@)
+	$(Q)(echo '#!$(PYTHON)'; sed '1 { /^#!/d; }' $<) > [email protected] && chmod +x [email protected] && mv -f [email protected] $@
+../share/linuxcnc/mesa_modbus.c.tmpl: hal/drivers/mesa-hostmot2/modbus/mesa_modbus.c.tmpl
+	$(ECHO) Copying Modbus template $(notdir $@)
+	$(Q)cp -f $< $@
+
+TARGETS += ../bin/halcompile ../bin/elbpcom ../bin/modcompile ../share/linuxcnc/mesa_modbus.c.tmpl
 objects/%.py: %.g
 	@mkdir -p $(dir $@)
 	$(Q)$(YAPPS) $< $@