Initial commit

.vscode/tasks.json

@@ -0,0 +1,15 @@
+{
+	"version": "2.0.0",
+	"tasks": [
+        {
+            "type": "shell",
+            "label": "Run python file",
+            "command": "python",
+            "args": ["${file}"],
+            "options": {
+                "cwd": "${workspaceFolder}"
+            },
+            "problemMatcher": []
+        },
+    ]
+}

cube-ide-cmake-demo-proj/.project

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>cube-ide-cmake-demo-proj</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
+		<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+</projectDescription>

cube-ide-cmake-demo-proj/.vscode/.cortex-debug.peripherals.state.json

@@ -0,0 +1 @@
+[]

cube-ide-cmake-demo-proj/.vscode/.cortex-debug.registers.state.json

@@ -0,0 +1 @@
+[]

cube-ide-cmake-demo-proj/.vscode/c_cpp_properties.json

@@ -0,0 +1,17 @@
+{
+    "version": 4,
+    "configurations": [
+        {
+            "name": "STM32",
+            "includePath": [],
+            "defines": [],
+            "compilerPath": "",
+            "cStandard": "gnu17",
+            "cppStandard": "gnu++14",
+            "intelliSenseMode": "${default}",
+
+            /* Use this and all the include paths will come from CMake configuration instead */
+            "configurationProvider": "ms-vscode.cmake-tools"
+        }
+    ]
+}

cube-ide-cmake-demo-proj/.vscode/cmake-kits.json

@@ -0,0 +1,10 @@
+[
+    {
+      "name": "GCC arm-none-eabi - custom toolchain setup",
+      "compilers": {
+        "C": "arm-none-eabi-gcc",
+        "CXX": "arm-none-eabi-g++"
+      },
+      "toolchainFile": "gcc-arm-none-eabi.cmake"
+    }
+]

cube-ide-cmake-demo-proj/.vscode/launch.json

@@ -0,0 +1,32 @@
+{
+    // Use IntelliSense to learn about possible attributes.
+    // Hover to view descriptions of existing attributes.
+    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "name": "Debug Microcontroller - STLink-V3",
+            "cwd": "${workspaceFolder}",
+            "type": "cortex-debug",
+            "executable": "${command:cmake.launchTargetPath}", //or fixed file path: build/stm32h735g-dk-led.elf
+            "request": "launch",                //Use "attach" to connect to target w/o elf download
+            "servertype": "stlink",
+            "device": "STM32H735IG",            //MCU used
+            "interface": "swd",
+            "serialNumber": "",                 //Set ST-Link ID if you use multiple at the same time
+            "runToMain": true,
+            "svdFile": "STM32H73x.svd",         //SVD file to see reisters
+            "v1": false,
+            "showDevDebugOutput": true,
+
+            /* Will get automatically detected if STM32CubeIDE is installed to default directory
+               or it can be manually provided if necessary.. */
+            //"serverpath": "c:\\ST\\STM32CubeIDE_1.7.0\\STM32CubeIDE\\plugins\\com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.win32_2.0.100.202109301221\\tools\\bin\\ST-LINK_gdbserver.exe",
+            //"armToolchainPath": "c:\\ST\\STM32CubeIDE_1.7.0\\STM32CubeIDE\\plugins\\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.9-2020-q2-update.win32_2.0.0.202105311346\\tools\\bin",
+            //"stm32cubeprogrammer": "c:\\Program Files\\STMicroelectronics\\STM32Cube\\STM32CubeProgrammer\\bin",
+
+            /* If you use external loader, add additional arguments */
+            //"serverArgs": ["--extload", "path/to/ext/loader.stldr"],
+        }
+    ]
+}

cube-ide-cmake-demo-proj/.vscode/tasks.json

@@ -0,0 +1,56 @@
+{
+	"version": "2.0.0",
+	"tasks": [
+        {
+            "type": "cppbuild",
+            "label": "Build project",
+            "command": "cmake",
+            "args": ["--build", "\"build\""],
+            "options": {
+                "cwd": "${workspaceFolder}"
+            },
+            "problemMatcher": ["$gcc"],
+            "group": {
+                "kind": "build",
+                "isDefault": true
+            }
+        },
+        {
+            "type": "shell",
+            "label": "Re-build project",
+            "command": "cmake",
+            "args": ["--build", "\"build\"", "--clean-first", "-v"],
+            "options": {
+                "cwd": "${workspaceFolder}"
+            },
+            "problemMatcher": ["$gcc"],
+        },
+        {
+            "type": "shell",
+            "label": "Clean project",
+            "command": "cmake",
+            "args": ["--build", "\"build\"", "--target", "clean"],
+            "options": {
+                "cwd": "${workspaceFolder}"
+            },
+            "problemMatcher": []
+        },
+        {
+            "type": "shell",
+            "label": "Run CMake configuration",
+            "command": "cmake",
+            "args": [
+                "--no-warn-unused-cli",
+                "-DCMAKE_EXPORT_COMPILE_COMMANDS:BOOL=TRUE",
+                "-DCMAKE_BUILD_TYPE:STRING=Debug",
+                "-DCMAKE_TOOLCHAIN_FILE:FILEPATH=gcc-arm-none-eabi.cmake",
+                "-Bbuild",
+                "-G", "Ninja"
+            ],
+            "options": {
+                "cwd": "${workspaceFolder}"
+            },
+            "problemMatcher": []
+        }
+    ]
+}

cube-ide-cmake-demo-proj/CMakeLists.txt

@@ -0,0 +1,121 @@
+cmake_minimum_required(VERSION 3.22)
+
+# Setup compiler settings
+set(CMAKE_C_STANDARD                11)
+set(CMAKE_C_STANDARD_REQUIRED       ON)
+set(CMAKE_C_EXTENSIONS              ON)
+set(CMAKE_CXX_STANDARD              20)
+set(CMAKE_CXX_STANDARD_REQUIRED     ON)
+set(CMAKE_CXX_EXTENSIONS            ON)
+set(PROJ_PATH                       ${CMAKE_CURRENT_SOURCE_DIR})
+message("Build type: "              ${CMAKE_BUILD_TYPE})
+
+#
+# Core project settings
+#
+project(stm32h735g-dk-led)
+enable_language(C CXX ASM)
+
+#
+# Core MCU flags, CPU, instruction set and FPU setup
+# Needs to be set properly for your MCU
+#
+set(CPU_PARAMETERS
+    -mthumb
+
+    # This needs attention to properly set for used MCU
+    -mcpu=cortex-m7
+    -mfpu=fpv5-d16
+    -mfloat-abi=hard
+)
+
+# Set linker script
+set(linker_script_SRC               ${PROJ_PATH}/STM32H735IGKX_FLASH.ld)
+set(EXECUTABLE                      ${CMAKE_PROJECT_NAME})
+
+#
+# List of source files to compile
+#
+set(sources_SRCS
+    ${PROJ_PATH}/Core/Src/main.c
+    ${PROJ_PATH}/Core/Src/stm32h7xx_it.c
+    ${PROJ_PATH}/Core/Src/syscalls.c
+    ${PROJ_PATH}/Core/Src/sysmem.c
+    ${PROJ_PATH}/Core/Src/system_stm32h7xx.c
+    ${PROJ_PATH}/Core/Startup/startup_stm32h735igkx.s
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_exti.c
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_gpio.c
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_pwr.c
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_rcc.c
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_utils.c
+)
+
+#
+# Include directories
+#
+set(include_path_DIRS
+    ${PROJ_PATH}/Core/Inc
+    ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Inc
+    ${PROJ_PATH}/Drivers/CMSIS/Device/ST/STM32H7xx/Include
+    ${PROJ_PATH}/Drivers/CMSIS/Include
+)
+
+#
+# Symbols definition
+#
+set(symbols_SYMB
+    "DEBUG"
+    "STM32H735xx"
+    "USE_FULL_LL_DRIVER"
+    "HSE_VALUE=25000000"
+)
+
+# Executable files
+add_executable(${EXECUTABLE} ${sources_SRCS})
+
+# Include paths
+target_include_directories(${EXECUTABLE} PRIVATE ${include_path_DIRS})
+
+# Project symbols
+target_compile_definitions(${EXECUTABLE} PRIVATE ${symbols_SYMB})
+
+# Compiler options
+target_compile_options(${EXECUTABLE} PRIVATE
+    ${CPU_PARAMETERS}
+    -Wall
+    -Wextra
+    -Wpedantic
+    -Wno-unused-parameter
+    # Full debug configuration
+    -Og -g3 -ggdb
+)
+
+# Linker options
+target_link_options(${EXECUTABLE} PRIVATE
+    -T${linker_script_SRC}
+    ${CPU_PARAMETERS}
+    -Wl,-Map=${CMAKE_PROJECT_NAME}.map
+    --specs=nosys.specs
+    -Wl,--start-group
+    -lc
+    -lm
+    -lstdc++
+    -lsupc++
+    -Wl,--end-group
+    -Wl,--print-memory-usage
+)
+
+# Execute post-build to print size
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+    COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${EXECUTABLE}>
+)
+
+# Convert output to hex and binary
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+    COMMAND ${CMAKE_OBJCOPY} -O ihex $<TARGET_FILE:${EXECUTABLE}> ${EXECUTABLE}.hex
+)
+
+# Conver to bin file -> add conditional check?
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+    COMMAND ${CMAKE_OBJCOPY} -O binary $<TARGET_FILE:${EXECUTABLE}> ${EXECUTABLE}.bin
+)

cube-ide-cmake-demo-proj/Core/Inc/main.h

@@ -0,0 +1,97 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_rcc.h"
+#include "stm32h7xx_ll_crs.h"
+#include "stm32h7xx_ll_bus.h"
+#include "stm32h7xx_ll_system.h"
+#include "stm32h7xx_ll_exti.h"
+#include "stm32h7xx_ll_cortex.h"
+#include "stm32h7xx_ll_utils.h"
+#include "stm32h7xx_ll_pwr.h"
+#include "stm32h7xx_ll_dma.h"
+#include "stm32h7xx_ll_gpio.h"
+
+#if defined(USE_FULL_ASSERT)
+#include "stm32_assert.h"
+#endif /* USE_FULL_ASSERT */
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define LED1_Pin LL_GPIO_PIN_2
+#define LED1_GPIO_Port GPIOC
+#define LED2_Pin LL_GPIO_PIN_3
+#define LED2_GPIO_Port GPIOC
+#ifndef NVIC_PRIORITYGROUP_0
+#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bit  for pre-emption priority,
+                                                                 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bit  for pre-emption priority,
+                                                                 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
+                                                                 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
+                                                                 1 bit  for subpriority */
+#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
+                                                                 0 bit  for subpriority */
+#endif
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */