enable sae & add support for product & system_ext partition

README.md

@@ -21,6 +21,11 @@ gChannelBondingMode5GHz=1
 gForce1x1Exception=0
 ```
 
+- Enable SAE WPA3. 开启SAE WPA3。
+```
+sae_enabled=1
+```
+
 This module should work on most of the devices. The basic logic is simple, but not all devices need such kind of module. If you can find `WCNSS_qcom_cfg.ini` in your system partition, please open an issue to report it to me; if you can't, this module won't work for you, including almost all Nexus/Pixel devices.
 
 该模块可在大多数设备上使用。其逻辑很简单，但是并非所有设备都适用该模块。如果您可以在系统分区中找到`WCNSS_qcom_cfg.ini`，请创建 issue 告诉我。 如果不能，则该模块将对您的设备不起作用，包括几乎所有的 Nexus / Pixel 设备。

customize.sh

@@ -1,5 +1,5 @@
 [ -x "$(which magisk)" ] && MIRRORPATH=$(magisk --path)/.magisk/mirror || unset MIRRORPATH
-array=$(find /system /vendor -name WCNSS_qcom_cfg.ini)
+array=$(find /system /vendor /product /system_ext -name WCNSS_qcom_cfg.ini)
 for CFG in $array
 do
 [[ -f $CFG ]] && [[ ! -L $CFG ]] && {
@@ -8,7 +8,7 @@ mkdir -p `dirname $MODPATH$CFG`
 ui_print "- Migrating $MIRRORPATH$SELECTPATH"
 cp -af $MIRRORPATH$SELECTPATH $MODPATH$SELECTPATH
 ui_print "- Starting modifiy"
-sed -i '/gChannelBondingMode24GHz=/d;/gChannelBondingMode5GHz=/d;/gForce1x1Exception=/d;s/^END$/gChannelBondingMode24GHz=1\ngChannelBondingMode5GHz=1\ngForce1x1Exception=0\nEND/g' $MODPATH$SELECTPATH
+sed -i '/gChannelBondingMode24GHz=/d;/gChannelBondingMode5GHz=/d;/gForce1x1Exception=/d;/sae_enabled=/d;s/^END$/gChannelBondingMode24GHz=1\ngChannelBondingMode5GHz=1\ngForce1x1Exception=0\nsae_enabled=1\nEND/g' $MODPATH$SELECTPATH
 }
 done
-[[ -z $SELECTPATH ]] && abort "- Installation FAILED. Your device didn't support WCNSS_qcom_cfg.ini." || { mkdir -p $MODPATH/system; mv -f $MODPATH/vendor $MODPATH/system/vendor;}
+[[ -z $SELECTPATH ]] && abort "- Installation FAILED. Your device didn't support WCNSS_qcom_cfg.ini." || { mkdir -p $MODPATH/system; mv -f $MODPATH/vendor $MODPATH/system/vendor; mv -f $MODPATH/product $MODPATH/system/product; mv -f $MODPATH/system_ext $MODPATH/system/system_ext;}

module.prop

@@ -1,7 +1,7 @@
 id=wifi-bonding
 name=Wifi Bonding (Qcom)
-version=1.14
-versionCode=15
+version=1.15
+versionCode=16
 author=simonsmh
 description=Doubles your wi-fi bandwith by modifying WCNSS_qcom_cfg.ini.
 updateJson=https://cdn.jsdelivr.net/gh/Magisk-Modules-Repo/wifi-bonding/version.json

version.json

@@ -1,6 +1,6 @@
 {
-  "version": "1.14",
-  "versionCode": 15,
-  "zipUrl": "https://github.com/Magisk-Modules-Repo/wifi-bonding/releases/download/15/wifi_bonding.zip",
+  "version": "1.15",
+  "versionCode": 16,
+  "zipUrl": "https://github.com/Magisk-Modules-Repo/wifi-bonding/releases/download/16/wifi_bonding.zip",
   "changelog": "https://cdn.jsdelivr.net/gh/Magisk-Modules-Repo/wifi-bonding/README.md"
 }