Re-fork XBian

.gitignore

@@ -0,0 +1,8 @@
+.gitignore
+.git
+2012-09-18-wheezy-raspbian.zip
+lirc.tar
+.DS_Store
+Updates
+.deb
+opt/vc/src

.gitmodules

@@ -0,0 +1,6 @@
+[submodule "usr/src/tools"]
+	path = usr/src/tools
+	url = https://github.com/raspberrypi/tools.git
+[submodule "opt/raspberry/linux"]
+	path = opt/raspberry/linux
+	url = git://github.com/raspberrypi/linux.git

README.md

@@ -1,2 +1,11 @@
-xbian-1.0-fs-permissions-todo
-=============================
+Dear XBian Forker,
+
+Last week we did some big changes on our main xbian repository. We are pleased to see that you have forked us but want to ask if you can delete your fork and re-fork us, so we are in sync again?
+
+Thanks in advanced!
+
+Regards,
+CurlyMoo
+
+ps I. If you have any questions, you can contact me on development@xbian.org or the xbian.org forum.<br />
+ps II. This not only counts for our main 'xbian' repo, but for all repo's you might have forked from us.

boot/.firmware_revision

@@ -0,0 +1 @@
+47eba77cdaac2b94d1778c89030783c8f82a7b51

boot/LICENCE.broadcom

@@ -0,0 +1,29 @@
+Copyright (c) 2006, Broadcom Corporation.
+All rights reserved.
+
+Redistribution.  Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+* This software may only be used for the purposes of developing for, 
+  running or using a Raspberry Pi device.
+* Redistributions must reproduce the above copyright notice and the
+  following disclaimer in the documentation and/or other materials
+  provided with the distribution.
+* Neither the name of Broadcom Corporation nor the names of its suppliers
+  may be used to endorse or promote products derived from this software
+  without specific prior written permission.
+
+DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGE.
+

boot/README.md

@@ -0,0 +1,6 @@
+rpi-firmware
+============
+
+Firmware files for the Raspberry Pi. These are mirred in a seperate repo from the official one, because for updating the firmware, we're only interested in the files in the boot folder of the official repo. Git doesn't provide a way to clone only a single subfolder of a repo, and downloading the entire repo including the sample code and VC libs would take too long.
+
+If the boot firmware files are split off into a seperate repo, then the tool could be pointed at that repo instead of this one, as long as the firmware files are in the root of the repo.

boot/cmdline.txt

@@ -0,0 +1 @@
+dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash

boot/config.txt

@@ -0,0 +1,7 @@
+arm_freq=840
+core_freq=375
+disable_overscan=1
+gpu_mem_256=128
+gpu_mem_512=128
+sdram_freq=400
+over_voltage=0

etc/bash_completion.d/xbian-config.sh

@@ -0,0 +1,17 @@
+_xbian-config()
+{
+	local cur prev opts
+	COMPREPLY=();
+	cur="${COMP_WORDS[COMP_CWORD]}"
+	prev="${COMP_WORDS[COMP_CWORD-1]}"
+	if [ -d "/usr/local/include/xbian-config/modules/${prev}" ]; then
+		arguments=$(grep ARGUMENTS "/usr/local/include/xbian-config/modules/${prev}/main" | sed -ne 's/\(.*\)\((\)\(.*\)\().*\)/\3/p');
+		COMPREPLY=($(compgen -W "${arguments}" -- $cur))
+		return 0;
+	else
+		opts=$(ls /usr/local/include/xbian-config/modules/);
+		COMPREPLY=($(compgen -W "${opts}" -- ${cur}))
+		return 0;
+	fi
+}
+complete -F _xbian-config xbian-config

etc/init.d/bootlocal

@@ -0,0 +1,102 @@
+#!/bin/bash
+#
+#Copyright 2012 CurlyMo <development@xbian.org>
+#
+#This file is part of Xbian - XBMC on the Raspberry Pi.
+#
+#Xbian is free software: you can redistribute it and/or modify it under the 
+#terms of the GNU General Public License as published by the Free Software 
+#Foundation, either version 3 of the License, or (at your option) any later 
+#version.
+#
+#Xbian is distributed in the hope that it will be useful, but WITHOUT ANY 
+#WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS 
+#FOR A PARTICULAR PURPOSE. See the GNU General Public License for more 
+#details.
+#
+#You should have received a copy of the GNU General Public License along 
+#with Xbian. If not, see <http://www.gnu.org/licenses/>
+#
+### BEGIN INIT INFO
+# Provides:          bootlocal
+# Required-Start:    $remote_fs $syslog
+# Required-Stop:     $remote_fs $syslog 
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: XBian boot scripts
+# Description:
+#
+### END INIT INFO
+
+NAME=bootlocal
+DESC="XBian boot scripts"
+VERBOSE=no
+SCRIPTNAME=/etc/init.d/bootlocal
+
+function resizesd() {
+	if [ $(grep "/dev/mmcblk0p2[\ ]\{1,\}/" /etc/fstab | wc -l) -eq 1 ] && [ $(grep noresizesd /proc/cmdline | wc -l) -eq 0 ]; then
+		# check if the partition needs resizing
+		FDISKBLOCKSIZE=$(/sbin/sfdisk -d /dev/mmcblk0 | grep Id=83 | awk '{printf "%d", $6}');
+		FDISKBLOCKCOUNT=$(/sbin/fdisk -l /dev/mmcblk0 | grep Units | sed -ne 's/\(.*= \)\([0-9]\{1,\}\)\( bytes\)/\2/p');
+		TUNE2FS=$(/sbin/tune2fs -l /dev/mmcblk0p2);
+		TUNEBLOCKSIZE=$(echo -e "${TUNE2FS}" | grep "Block size" | awk '{printf "%d", $3}');
+		TUNEBLOCKCOUNT=$(echo -e "${TUNE2FS}" | grep "Block count" | awk '{printf "%d", $3}');
+		TUNETOTALBLOCKS=$(($(($TUNEBLOCKCOUNT*$TUNEBLOCKSIZE))/1024/1024));
+		FDISKTOTALBLOCKS=$(($(($FDISKBLOCKSIZE*$FDISKBLOCKCOUNT))/1024/1024));
+
+		# resize root partition
+		if [ $TUNETOTALBLOCKS -lt $FDISKTOTALBLOCKS ]; then
+			/sbin/resize2fs /dev/mmcblk0p2
+		fi
+
+		FDISKBLOCKSIZE=$(/sbin/sfdisk -d /dev/mmcblk0 | grep Id=83 | awk '{printf "%d", $6}');
+		FDISKBLOCKCOUNT=$(/sbin/fdisk -l /dev/mmcblk0 | grep Units | sed -ne 's/\(.*= \)\([0-9]\{1,\}\)\( bytes\)/\2/p');
+		TUNE2FS=$(/sbin/tune2fs -l /dev/mmcblk0p2);
+		TUNEBLOCKSIZE=$(echo -e "${TUNE2FS}" | grep "Block size" | awk '{printf "%d", $3}');
+		TUNEBLOCKCOUNT=$(echo -e "${TUNE2FS}" | grep "Block count" | awk '{printf "%d", $3}');
+		TUNETOTALBLOCKS=$(($(($TUNEBLOCKCOUNT*$TUNEBLOCKSIZE))/1024/1024));
+		FDISKTOTALBLOCKS=$(($(($FDISKBLOCKSIZE*$FDISKBLOCKCOUNT))/1024/1024));
+
+		if [ $TUNETOTALBLOCKS -eq $FDISKTOTALBLOCKS ]; then
+			return 1;
+		else
+			return 0;
+		fi
+	fi
+}
+
+function createswap() {
+	if [ ! -f /var/swapfile ] && [ $(grep noswapfile /proc/cmdline | wc -l) -eq 0 ]; then
+		dd if=/dev/zero of=/var/swapfile bs=1024 count=128000
+		/sbin/mkswap /var/swapfile &>/dev/null
+		/sbin/swapon /var/swapfile &>/dev/null
+	fi
+	if [ -f /var/swapfile ] && [ $(grep /var/swapfile /etc/fstab | wc -l) -eq 0 ]; then
+		echo -e '/var/swapfile\tswap\tswap\tdefaults\t0\t0' >> /etc/fstab
+	fi
+}
+
+case "$1" in
+  start)
+		resizesd;
+		if [ $? -eq 1 ]; then
+			createswap;
+		fi
+        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" ""
+        /etc/rc.local
+		echo 1 | sudo tee /proc/sys/vm/drop_caches >/dev/null
+        case "$?" in
+                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+        esac
+        ;;
+  stop)
+        sync
+        ;;
+  *)
+        echo "Usage: $SCRIPTNAME {start|stop}" >&2
+        exit 3
+        ;;
+esac
+
+:

etc/init.d/lirc

@@ -0,0 +1,170 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          lirc
+# Required-Start:    $remote_fs $syslog
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Starts LIRC daemon.
+# Description:       LIRC is used to control different
+#                    infrared receivers and transceivers.
+### END INIT INFO
+
+load_modules ()
+{
+	MODULES_MISSING=false
+
+	log_daemon_msg "Loading LIRC modules"
+	for mod in $*; do
+		if [ $mod = "udev" ]; then
+			log_end_msg 0
+			log_success_msg "Restarted via udev, don't reload modules"
+			break
+		else
+			modprobe $mod 2> /dev/null || MODULES_MISSING=true
+		fi
+	done
+	log_end_msg $?
+
+	if $MODULES_MISSING; then
+		log_failure_msg "Unable to load LIRC kernel modules. Verify your"
+		log_failure_msg "selected kernel modules in /etc/lirc/hardware.conf"
+		START_LIRCMD=false
+		START_LIRCD=false
+	fi
+}
+
+build_args ()
+{
+	ARGS="$*"
+
+	## Try to find an lirc device.
+	if [ -z "$DEVICE" ]; then
+		if [ -c $dev ]; then
+			DEVICE="$dev"
+			break
+		fi
+	fi
+
+	if [ -n "$DEVICE" ] && [ "$DEVICE" != "none" ]; then
+		ARGS="--device=$DEVICE $ARGS"
+	fi
+
+	if [ -n "$DRIVER" ] && [ "$DRIVER" != "none" ]; then
+		ARGS="--driver=$DRIVER $ARGS"
+	fi
+
+	echo $ARGS
+}
+
+. /lib/lsb/init-functions
+
+test -f /usr/local/sbin/lircd || exit 0
+test -f /usr/local/sbin/lircmd || exit 0
+
+START_LIRCMD=true
+START_LIRCD=true
+START_IREXEC=true
+
+
+if [ -f /etc/lirc/hardware.conf ];then
+	. /etc/lirc/hardware.conf
+fi
+
+if [ ! -f /etc/lirc/lircd.conf ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircd.conf; then
+	if [ "$1" = "start" ]; then
+		log_success_msg "No valid /etc/lirc/lircd.conf has been found."
+		log_success_msg "Remote control support has been disabled."
+		log_success_msg "Reconfigure LIRC or manually replace /etc/lirc/lircd.conf to enable."
+	fi
+
+	START_LIRCD=false
+	START_LIRCMD=false
+	START_IREXEC=false
+fi
+
+if [ ! -f /etc/lirc/lircmd.conf ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircmd.conf; then
+	START_LIRCMD=false
+fi
+
+if [ ! -f /etc/lirc/lircrc ] || grep -q "^#UNCONFIGURED" /etc/lirc/lircrc; then
+	START_IREXEC=false
+fi
+
+case "$1" in
+	start)
+		[ -d "/var/run/lirc" ] || mkdir -p "/var/run/lirc"
+		if [ "$LOAD_MODULES" = "true" ] && [ "$START_LIRCD" = "true" ]; then
+			load_modules $2 $MODULES
+		fi
+
+		if [ "$START_LIRCD" = "true" ]; then
+			log_daemon_msg "Starting remote control daemon(s) : LIRC "
+			LIRCD_ARGS=`build_args $LIRCD_ARGS`
+
+			if [ ! -z "$LIRCD_ARGS" ]; then
+				start-stop-daemon --start --quiet --oknodo --exec /usr/local/sbin/lircd -- $LIRCD_ARGS < /dev/null
+				# retain compatibility with old clients
+				ln -fs ../var/run/lirc/lircd /dev/lircd
+				log_end_msg $?
+			else
+				log_end_msg 1
+			fi
+		fi
+
+		if [ "$START_LIRCMD" = "true" ]; then
+			log_daemon_msg "Starting remote control mouse daemon : LIRCMD "
+			start-stop-daemon --start --quiet --oknodo --exec /usr/local/sbin/lircmd < /dev/null
+			log_end_msg $?
+		fi
+
+		if [ "$START_IREXEC" = "true" ]; then
+			log_daemon_msg "Starting execution daemon: irexec"
+			start-stop-daemon --start --quiet --oknodo --exec /usr/local/bin/irexec -- -d /etc/lirc/lircrc < /dev/null
+			log_end_msg $?
+		fi
+		;;
+	stop)
+		if [ "$START_IREXEC" = "true" ]; then
+			log_daemon_msg "Stopping execution daemon: irexec"
+			start-stop-daemon --stop --quiet --exec /usr/local/bin/irexec
+			log_end_msg $?
+		fi
+
+		if [ "$START_LIRCMD" = "true" ]; then
+			log_daemon_msg "Stopping remote control mouse daemon: LIRCMD"
+			start-stop-daemon --stop --quiet --exec /usr/local/sbin/lircmd
+			log_end_msg $?
+		fi
+
+		if [ "$START_LIRCD" = "true" ]; then
+			log_daemon_msg "Stopping remote control daemon(s): LIRC"
+			start-stop-daemon --stop --quiet --exec /usr/local/sbin/lircd
+			log_end_msg $?
+		fi
+		;;
+	reload|force-reload)
+		if [ "$START_IREXEC" = "true" ]; then
+			start-stop-daemon --stop --quiet --signal 1 --exec /usr/local/bin/irexec
+		fi
+
+		if [ "$START_LIRCD" = "true" ]; then
+			start-stop-daemon --stop --quiet --signal 1 --exec /usr/local/sbin/lircd
+		fi
+
+		if [ "$START_LIRCMD" = "true" ]; then
+			start-stop-daemon --stop --quiet --signal 1 --exec /usr/local/sbin/lircmd
+		fi
+		;;
+	restart)
+		$0 stop
+		sleep 1
+		#passes parameter $2 which is possibly our udev paramater
+		$0 start $2
+		;;
+	*)
+		echo "Usage: /etc/init.d/lircd {start|stop|reload|restart|force-reload}"
+	exit 1
+esac
+
+exit 0