New feature: Custom Semisubmersible design #172
New feature: Custom Semisubmersible design #172nRiccobo wants to merge 12 commits intoNLRWindSystems:devfrom
Conversation
RHammond2
left a comment
RHammond2
left a comment
There was a problem hiding this comment.
Looks good, @nRiccobo! I made one request that mostly has to do with the lack of real testing from the original set of semi submersible tests, otherwise there was just a potential copy/paste error and some general comments for future work.
| heave_plate_CR: 6250 # USD/t | ||
| secondary_steel_CR: 7250 # USD/t | ||
| steel_CR: 4500 # USD/t *CustomSemiSub* | ||
| ballast_material_CR: 150 |
There was a problem hiding this comment.
Should this have a units comment as well?
| substructure = { | ||
| "mass": self.substructure_mass, | ||
| "unit_cost": self.substructure_unit_cost, | ||
| "towing_speed": self._design.get("towing_speed", 6), |
There was a problem hiding this comment.
This is a general comment, and I'm recognizing this is an engrained pattern in the code we've already noted, but it'd be really great to move the default values out of the methods themselves.
| Custom Semi-Submersible Design Methodology | ||
| ========================================== | ||
| For details of the code implementation, please see | ||
| :doc:`Semi-Submersible Design API <api_SemiSubmersibleDesign>`. |
There was a problem hiding this comment.
I think this should be referencing the custom version, not the standard version"
| cost = s.total_cost | ||
|
|
||
| assert cost != base_cost | ||
|
|
There was a problem hiding this comment.
I'm curious if the tests should apply to the each of the various MW rated turbines to ensure the scaling is correct in each case based on a cursory view of the paper. Though, if my understanding was off, and this was done just for the 15 MW, then this all should suffice for a regression test.
|
|
||
| assert cost != base_cost | ||
|
|
||
|
|
There was a problem hiding this comment.
As a comment for later work, and not in the near term, I think it'd be good to split out the tests between unit and regression since these are mostly regression tests.
| assert custom.substructure_unit_cost == pytest.approx(2.3343e7, 1e-4) | ||
|
|
||
|
|
||
| def test_custom_design_kwargs(): |
There was a problem hiding this comment.
I'm realizing that this was the design pattern for the original set of tests for the semi submersible design, but I was assuming this would also check that the input parameters are being fed through correctly. Would you be able to add basic checks for the new and existing model?
2 participants
The existing SemiSubmersible() design module originated from a Maness et al. 2017 and used cost curves that scaled all the sub-components by turbine rating. These cost curves are undoubtedly out of date and do not account for different turbine configurations.
The CustomSemiSubmersible() class that was added is based on the a published design of U-Maine's Volturnus design for a 15MW turbine. The model also combines U-Mass's power-law geometric scaling factor to adjust the size of the platform based on rotor diameter (from 15MW to XMW). The user can specify the roughly 12 design variables to size the platform to whatever they want. They can also set the power-law exponent to 0 if they want to avoid it altogether and pass through their own design for any given turbine. Citations included in the model.