Overview

This project focuses on the NRF52 device within a smart cluster, designed to receive data via a mobile application.

#Prerequisites Hardware:

• NRF52 device
• Smart cluster setup
• Mobile device with the corresponding application
• Power supply

Software:

• NRF52 SDK
• Mobile application (Android/iOS) for data transmission
• Any necessary libraries or dependencies

Setup

Hardware Connections:

• Integrate the NRF52 device into the smart cluster.
• Ensure proper power supply for all components.

Software Setup:

• Install the NRF52 SDK.
• Configure the mobile application to communicate with the NRF52 device.

Configuration

NRF52 Configuration:

• Configure the NRF52 device to listen for data from the mobile application.

• Implement the necessary protocols for data reception.

• Mobile Application Configuration:

• Set up the mobile application to transmit data to the NRF52 device.

• Configure the app to establish a connection with the NRF52 device.

• Building and Flashing

Build the Project:

• Use the provided Makefile or build script to compile the NRF52 firmware.

Flash to NRF52:

• Flash the compiled firmware to the NRF52 device.

Usage

Power On:

• Power on the NRF52 device and other components of the smart cluster.

• Mobile App Data Transmission:

• Open the mobile application.

• Initiate data transmission to the NRF52 device through the app.

Data Reception:

• The NRF52 device will receive and process the data sent from the mobile application.

Troubleshooting

• If you encounter issues during setup or operation, consider the following:

• Verify the NRF52 device is correctly integrated into the smart cluster.

• Ensure the mobile application is configured to communicate with the NRF52.

• Check for any error messages in the NRF52 logs.