Overview

• This project involves retrieving data from an NRF52 device and transmitting it to an IMX6 device via UART with RS232 communication.

Prerequisites

Hardware:

• XMC1400 microcontroller
• NRF52 device
• IMX6 device
• RS232 module
• UART cables
• Power supply

Software:

• Toolchain for XMC1400 development
• NRF52 SDK
• IMX6 SDK
• RS232 communication libraries
• Any additional libraries or dependencies

Setup

Hardware Connections:

• Connect NRF52 to XMC1400 using appropriate communication interfaces.
• Connect XMC1400 to IMX6 using UART and RS232.

Software Setup:

• Install the necessary toolchain for XMC1400 development.
• Set up NRF52 SDK and IMX6 SDK.
• Include RS232 communication libraries in your project.

Configuration

XMC1400 Configuration:

• Configure XMC1400 to communicate with NRF52 using the appropriate communication protocol.
• Implement data retrieval from NRF52.

UART Configuration:

• Set up UART communication on XMC1400 to transmit data.
• Configure UART on IMX6 to receive data.

RS232 Configuration:

• Configure RS232 communication between XMC1400 and IMX6.
• Ensure that baud rates and other settings match between the devices.
• Building and Flashing

Build the Project:

• Use the provided Makefile or build script to compile the project.

Flash to XMC1400:

• Flash the compiled firmware to the XMC1400 microcontroller.

Usage

Power On:

• Power on the XMC1400, NRF52, and IMX6 devices.

Data Transmission:

• The XMC1400 will retrieve data from the NRF52 and transmit it to the IMX6 via UART with RS232.

Troubleshooting

• If you encounter issues during setup or operation, refer to the following:

Check hardware connections.

• Verify software configurations.
• Review UART and RS232 settings.