#224 Clarify descriptions of Percent fields

OpenExposureData/OEDInputFields.csv

@@ -159,7 +159,7 @@
 "Acc","ExtraExpenseLimit","A limit that applies to the total extra expense loss","CR","float","0","[0,)","n/a","n/a","n/a"
 "Acc","DebrisRemovalFactor","A factor for a conditional coverage which tends to apply to all steps and is to cover Debris Removal. This value, entered as a decimal, should be the same for all steps for a policy contract and must be a value >=0. For example, 0.12 for 12%.","CR","float","0","[0,)","n/a","n/a","n/a"
 "Acc","MinimumTIV","Minimum replacement value for which pay-outs to the corresponding damage range will be allowed.","CR","float","0","[0,)","n/a","n/a","n/a"
-"Acc","ScaleFactor","Percentage factor used to scale calculated losses. This value, entered as a decimal, should be the same for all steps for a policy contract and must be a value >0. For example, 0.12 for 12%.","CR","float","1","[0,)","n/a","n/a","n/a"
+"Acc","ScaleFactor","Factor used to scale up calculated losses. This value, entered as a proportion, should be the same for all steps for a policy contract. Must be a value >0 and may be >1. For example, 0.12 would scale up losses by 12%.","CR","float","1","[0,)","n/a","n/a","n/a"
 "Acc","IsLimitAtDamage","Indicates whether the pay-out is limited by the actual ground-up loss.","CR","tinyint","0","[0,1]","n/a","n/a","n/a"
 "Acc","PolUserDef1","Policy user defined field","O","varchar(100)","n/a","","O","O","n/a"
 "Acc","PolUserDef2","Policy user defined field","O","varchar(100)","n/a","","O","O","n/a"
@@ -228,7 +228,7 @@
 "Loc","BuildingID","Unique building identification number","O","varchar(20)","n/a","","n/a","n/a","n/a"
 "Loc","LocInceptionDate","Location inception date - in ISO 8601 format: YYYY-MM-DD","O","smalldatetime","n/a","","n/a","n/a","n/a"
 "Loc","LocExpiryDate","Location expiry date - in ISO 8601 format: YYYY-MM-DD","O","smalldatetime","n/a","","n/a","n/a","n/a"
-"Loc","PercentComplete","Completeness percentage of the construction project at this location. The project completion percentage is by the cost of the project. Values between 0 to 1 (e.g. 12% enterd as 0.12)","O","decimal","1","[0,1]","n/a","n/a","n/a"
+"Loc","PercentComplete","Percentage of the construction project complete, entered as a proportion with values between 0 and 1 (e.g. 12% entered as 0.12). The completeness percentage is by the cost of the project.","O","decimal","1","[0,1]","n/a","n/a","n/a"
 "Loc","CompletionDate","Construction project completion date - in ISO 8601 format: YYYY-MM-DD","O","date","n/a","","n/a","n/a","n/a"
 "Loc","CountryCode","Country code (based on ISO3166 alpha-2 codes)","R","char(2)","n/a","","n/a","n/a","R"
 "Loc","Latitude","Latitude in degrees (-90.0 to +90.0)","O","decimal","n/a","[-90,90]","n/a","n/a","n/a"
@@ -272,7 +272,7 @@
 "Loc","LocBrokerage","Brokerage amount at location level","O","float","0","[0,)","n/a","n/a","n/a"
 "Loc","LocNetPremium","Net premium at location level","O","float","0","[0,)","n/a","n/a","n/a"
 "Loc","NonCatGroundUpLoss","Ground-Up non-cat loss value prior to the application of non-cat policy terms","O","float","0","[0,)","n/a","n/a","n/a"
-"Loc","LocParticipation","Percentage of risk that the insurer covers for this location. Values between 0 to 1 (e.g. 12% enterd as 0.12). Usually used in binders or offshore.","O","float","1","[0,1]","n/a","n/a","n/a"
+"Loc","LocParticipation","Share of the risk that the insurer covers for this location, entered as a proportion with values between 0 to 1 (e.g. 12% entered as 0.12). Usually used in binders or offshore.","O","float","1","[0,1]","n/a","n/a","n/a"
 "Loc","PayoutBasis","Pay-out basis for the claim (whether depreciation is taken into account). ACV = RCV - depreciation.","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","ReinsTag","User defined reinsurance tag to provide a further option for specifying reinsurance scope","O","varchar(20)","n/a","","n/a","n/a","n/a"
 "Loc","LocDedCode1Building","Location building deductible code","O","tinyint","0","","n/a","n/a","n/a"
@@ -328,7 +328,7 @@
 "Loc","YearUpgraded","Year the building was upgraded (4 digit year)","O","smallint","0","[0,)","n/a","n/a","n/a"
 "Loc","SurgeLeakage","Storm leakage percentage (0% to 100%) for Wind only policies","O","float","-999","[-999,-999], [0,1]","n/a","n/a","n/a"
 "Loc","SprinklerType","Sprinkler type","O","tinyint","0","","n/a","n/a","O"
-"Loc","PercentSprinklered","Percent sprinklered. Values between 0 and 1 inclusive (0.5 = 50%); -999 is unknown","O","float","-999","[-999,-999], [0,1]","n/a","n/a","O"
+"Loc","PercentSprinklered","Percent sprinklered, entered as a proportion with values between 0 and 1 inclusive (0.5 = 50%); -999 is unknown","O","float","-999","[-999,-999], [0,1]","n/a","n/a","O"
 "Loc","RoofCover","Code that represents the material used to cover the roof","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","RoofYearBuilt","Year the roof was last replaced (4 digit year)","O","smallint","0","[0,)","n/a","n/a","n/a"
 "Loc","RoofGeometry","Code that represents the shape of the roof","O","tinyint","0","","n/a","n/a","n/a"
@@ -403,12 +403,12 @@ Code for the appurtenant building, such as shed or detached garage","O","tinyint
 "Loc","SalvageProtection","The salvage potential of a particular product","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","ValuablesStorage","Where the specie element is stored","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","DaysHeld","Number of days cargo is kept at port or the duration of an exhibition. Values between 0 to 1825 (up to 5 years). Default = 365.","O","smallint","365","[0,1825]","n/a","n/a","n/a"
-"Loc","BrickVeneer","Code that represents the percentage of external walls that consist of brick veneer.","O","tinyint","0","","n/a","n/a","n/a"
+"Loc","BrickVeneer","Code that represents the proportion of external walls that consist of brick veneer. See 'OtherValues' for list of valid values.","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","FEMACompliance","Indicates whether the building is in compliance with the FEMA flood zone requirements in both design and construction","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","CustomFloodSOP","Standard of flood protection return period; values from 0-10,000","O","tinyint","0","[0,10000]","n/a","n/a","n/a"
 "Loc","CustomFloodZone","User-defined flood zone","O","varchar(20)","n/a","","n/a","n/a","n/a"
 "Loc","MultiStoryHall","Code that indicates if the building has a multi-story hall","O","tinyint","0","","n/a","n/a","n/a"
-"Loc","BuildingExteriorOpening","Code that represents the percentage of exterior walls that are open (i.e. have windows or doors)","O","tinyint","0","","n/a","n/a","n/a"
+"Loc","BuildingExteriorOpening","Code that represents the proportion of exterior walls that are open (i.e. have windows or doors). See 'OtherValues' for list of valid values.","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","ServiceEquipmentProtection","Code that indicates whether the service equipment is protected from flood","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","TallOneStory","The height of the taller than usual one-story building (e.g. gymnasium, auditorium, church, etc.)","O","tinyint","0","","n/a","n/a","n/a"
 "Loc","TerrainRoughness","Terrain conditions around the building.","O","tinyint","0","","n/a","n/a","n/a"
@@ -419,7 +419,7 @@ Code for the appurtenant building, such as shed or detached garage","O","tinyint
 "ReinsInfo","ReinsPeril","Perils for reinsurance financial terms","R","varchar(250)","n/a","","R","R","R"
 "ReinsInfo","ReinsInceptionDate","Reinsurance inception date - in ISO 8601 format: YYYY-MM-DD","O","smalldatetime","n/a","","O","O","O"
 "ReinsInfo","ReinsExpiryDate","Reinsurance expiry date - in ISO 8601 format: YYYY-MM-DD","O","smalldatetime","n/a","","O","O","O"
-"ReinsInfo","CededPercent","Reinsurance ceded percentage. Used mainly in surplus treaties. Applies before other reinsurance terms. Values between 0 to 1 (e.g. 12% entered as 0.12)","O","float","1","[0,1]","O","O","O"
+"ReinsInfo","CededPercent","Reinsurance ceded percentage, entered as a proportion with values between 0 and 1 (e.g. 12% entered as 0.12). Used mainly in surplus treaties. Applies before other reinsurance terms.","O","float","1","[0,1]","O","O","O"
 "ReinsInfo","RiskLimit","Reinsurance per-risk limit","CR","float","0","[0,)","CR","CR","CR"
 "ReinsInfo","RiskAttachment","Reinsurance per-risk attachment point","CR","float","0","[0,)","CR","CR","CR"
 "ReinsInfo","OccLimit","Reinsurance occurrence limit","O","float","0","[0,)","O","O","O"
@@ -429,17 +429,17 @@ Code for the appurtenant building, such as shed or detached garage","O","tinyint
 "ReinsInfo","AggLimit","Maximum amount payable under this treaty during the AggPeriod","O","float","0","[0,)","O","O","n/a"
 "ReinsInfo","AggAttachment","The aggregate monetary amount during a given AggPeriod that the resinured retains under this treaty","O","float","0","[0,)","O","O","n/a"
 "ReinsInfo","AggPeriod","Aggregate period associated with the aggregate limits and attachments (in days). Default value = 365 (1 year)","O","float","365","[0,3650]","O","O","n/a"
-"ReinsInfo","PlacedPercent","Percentage of the limit that has been placed in the reinsurance market. The main percentage used for reinsurance treaties other than surplus. Applies after other reinsurance terms. Values between 0 to 1 (e.g. 12% entered as 0.12)","R","float","n/a","[0,1]","R","R","R"
+"ReinsInfo","PlacedPercent","Percentage of the limit that has been placed in the reinsurance market, entered as a proportion with values between 0 and 1 (e.g. 12% entered as 0.12). Used for reinsurance treaties other than surplus, after other reinsurance terms. ","R","float","n/a","[0,1]","R","R","R"
 "ReinsInfo","ReinsCurrency","Reinsurance currency","R","char(3)","n/a","","R","R","R"
 "ReinsInfo","InuringPriority","Reinsurance inuring priority capturing the order in which reinsurance contracts apply. Treaties with lower number inuring priorities apply first.","R","tinyint","n/a","[1,)","R","R","R"
 "ReinsInfo","ReinsType","Type of reinsurance contract","R","varchar(3)","n/a","","R","R","R"
 "ReinsInfo","AttachmentBasis","Reinsurance attachment basis","O","char(2)","('LO')","","O","O","n/a"
 "ReinsInfo","Reinstatement","Number of reinstatements","O","tinyint","n/a","[0,)","O","O","n/a"
 "ReinsInfo","ReinstatementCharge","Reinstatement charge as %; semi-colon separated if different for each reinstatement (e.g. 1-free, 2-50%, 3-100% should be entered as: 0;0.5;1). If all reinstatements are the same, then just one number is sufficient (e.g. 3 reinstatements at 100% should be entered as 1)","O","varchar(50)","n/a","","O","O","n/a"
 "ReinsInfo","ReinsPremium","Reinsurance premium","O","float","0","[0,)","O","O","n/a"
-"ReinsInfo","DeemedPercentPlaced","Deemed percent placed, used to represent notional contracts or any part of the contract being notional. For fully notional contracts, enter 1 (i.e. 100%). For partially placed contracts, enter any value between 0 and 1. For real contracts, enter 0.","O","float","0","[0,1]","O","O","n/a"
+"ReinsInfo","DeemedPercentPlaced","Deemed percent placed, entered as a proportion with values between 0 and 1. Used to represent notional contracts or any part of the contract being notional. For fully notional contracts, enter 1 (i.e. 100%). For partially placed contracts, enter any value between 0 and 1. For real contracts, enter 0.","O","float","0","[0,1]","O","O","n/a"
 "ReinsInfo","ReinsFXrate","Reinsurance exchange rate (as the contractual reinsurance rate can be different from the actual exchange rates used for policies and locations)","O","float","1","[0,)","O","O","n/a"
-"ReinsInfo","TreatyShare","The percentage of a treaty that a given reinsurer may write. Values between 0 to 1 (e.g. 12% entered as 0.12).","O","float","1","[0,1]","O","O","n/a"
+"ReinsInfo","TreatyShare","The percentage of a treaty that a given reinsurer may write, entered as a proportion with values between 0 to 1 (e.g. 12% entered as 0.12).","O","float","1","[0,1]","O","O","n/a"
 "ReinsInfo","UseReinsDates","A flag to indicate if reinsurance contract dates or  policy inception / expiry dates are to be considered when calculating losses (Y) or ignored (N).","O","char(1)","N","","O","O","n/a"
 "ReinsScope","ReinsNumber","Reinsurance number to link with ReinsInfo file","R","int","n/a","[1,)","R","R","R"
 "ReinsScope","PortNumber","Portfolio number: used for defining treaty scope in the reinsurance scope file","CR","varchar(20)","n/a","","CR","CR","CR"