Skip to content

docs_blackbox 4x_connect nema17

Jump to bottom
peter edited this page May 14, 2025 · 2 revisions

3.2.1 Connecting BlackBox 4X to NEMA17 Motors

exclamation.png IMPORTANT WARNING: Note: Never connect/disconnect motors to a powered-up controller. Always turn off power before connecting/disconnecting accessories to/from your BlackBox

Note if you are not using OpenBuilds Motors, refer to FAQ: Identify Motor coils to identify the coil pairs. The color codes shown below only apply to OpenBuilds Motors

nema17.png

Clone this wiki locally