SMXY-3D is a high-performance, CoreXY-based 3D printer designed for speed, precision, and modularity perfect for who demand professional results at an affordable cost. Built with a rigid aluminum frame and advanced motion system, it's optimized for Klipper, input shaping, and future upgrades.
- CoreXY Architecture
- Large Build Volume of up to 310×310×310 mm
- Dual Z-axis
- Klipper Compatibility
- Speed upto 450mm/s
- High Quality prints
- Rigid Frame with Linear Rails
I made this 3d printer to make a cheap diy high end printer with high speed and good quality.So, anyone can experience high-end printers in Pocket-friendly price and if want something extra and less they can do it and if anything breaks they easily replace and buy it.
Visit this web to view it in 3d : View
3D Model : This is just a representation it has many alignment and parts issuses like missing belts improper lead screw allignment and extruder fan missing.These things will be prefect in the physical build and does not cause any issues.
.png)
.png)
Wiring : This is general wiring for all components.(referenced from web)
| Category | Qty | Item | Size/Spec | Price(USD) | Link |
|---|---|---|---|---|---|
| Frame & Structure | 4 | 4040 Aluminum Extrusion | 400mm | 6.24 | Link |
| Frame & Structure | 8 | 2040 Aluminum Extrusion (alt) | 440mm | 33.54 | Link |
| Frame & Structure | 2 | 2040 Aluminum Extrusion | 400mm | 7.65 | Link |
| Frame & Structure | 2 | 2020 Aluminum Extrusion | 370mm | 2.89 | Link |
| Frame & Structure | 1 | 2020 Aluminum Extrusion | 400mm | 2 | Link |
| Frame & Structure | 44 | Profile Connector | 2020 | 13.2 | Link |
| Frame & Structure | 20 | Profile Connector | 2020 | 7.2 | Link |
| Frame & Structure | 8 | Endcap for 2040 | - | 1.2 | Link |
| Fasteners & Screws | 40 | T-Nuts | - | 2 | Link |
| Fasteners & Screws | 100+ | Screws | M3/m4 | 25 | Link |
| Motion System | 3 | MGN12H Linear Rails | - | 84 | Link |
| Motion System | 2 | NEMA 17 Stepper Mounts | - | 3 | Link |
| Motion System | 1 | GT2 Timing Belt | 6mm x 250cm | 2 | Link |
| Motion System | 8 | GT2 Idler Pulleys | 6mm | 4 | Link |
| Motion System | 4 | NEMA 17 Stepper Motors | - | Already owned | Link |
| Z-Axis & Bed | 2 | Lead Screw Rods | 400mm | 6 | Link |
| Z-Axis & Bed | 2 | Lead Screw Mounts | Fixed | 3 | Link |
| Z-Axis & Bed | 2 | Lead Screw Mounts | Bed | 2 | Link |
| Z-Axis & Bed | 4 | Rod Mounts | 8mm | 6 | Link |
| Z-Axis & Bed | 2 | LM8UU Bearings | 8mm | 2 | Link |
| Z-Axis & Bed | 1 | Bed Plate | 310x310mm | 6 | Link |
| Z-Axis & Bed | 4 | Silicone Spacers | - | 2 | Link |
| Z-Axis & Bed | 1 | Heated Bed | 310x310mm | 16 | Link |
| Z-Axis & Bed | 8 | Clips | - | 1 | |
| Extruder & Print Head | 1 | Extruder Kit | - | 12 | Link |
| Extruder & Print Head | 1 | V6 Hotend | - | Already owned | Link |
| Psu | 1 | 12v 30A PSU | - | Already owned | Link |
| Main Board | 1 | Octopus V1.1 | - | 24 | Link |
| Main Board | 5 | TMC2209 | - | 28 | Link |
| Main Board | 1 | Rpi 3 1gb | - | Already owned | Link |
| Main Board | 1 | TFT tochscreen for rpi | - | 9 | Link |
| Total | $310.92 |