Written in Python 3. Allow you to generate thousands of wallets in 12 different crypto currencies and save all the credentials into the usual CSV file. Can be really useful for running an ICO, building an exchange or even accepting crypto payments instead of PayPal or something.
To use this software you should install and synchronize all the necessary clients. For example, if you want to generate Bitcoin addresses - install bitcoind and so on. All the instructions are listed bellow. More than that - by generating wallets with your own node, you'll have the abality to query balances for generating addresses, view ttransactions list, etc.
| Name (Coinmarketcap link) | Status | Volume (24h) | Website | For developers |
|---|---|---|---|---|
| Bitcoin (link) | Ready | 1.000.000.000 $ | https://bitcoin.org/ | Bitcoin-cli |
| Bitcoin cash (link) | Ready | 360.000.000 $ | https://www.bitcoincash.org/ | Bitcoin-cli |
| Ethereum (link) | Ready | 785.000.000 $ | https://www.ethereum.org/ | Geth |
| Ethereum classic (link) | Ready | 87.000.000 $ | https://ethereumclassic.github.io/ | Geth-classic |
| Litecoin (link) | Ready | 119.000.000 $ | https://litecoin.com/ | Litecoin-cli |
| Dash (link) | Ready | 23.000.000 $ | https://www.dash.org/ | Dash-cli |
| Zcash (link) | Ready | 27.000.000 $ | https://z.cash/ | Zcash-cli |
| Reddcoin (link) | Ready | 970.000 $ | http://www.reddcoin.com/ | Reddcoin-cli |
| Navcoin (link) | Ready | 145.000 $ | https://navcoin.org/ | Navcoin-cli |
| Vertcoin (link) | Ready | 550.000 $ | https://vertcoin.org/ | Vertcoind |
| Dogecoin (link) | Ready | 5.000.000 $ | http://dogecoin.com/ | Dogecoin-cli |
| Emercoin (link) | Ready | 200.000 $ | http://emercoin.com/ | Emercoin-cli |
- Installation guide - "Running A Full Node"
- Block explorer - link
Install
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install bitcoindConfigure
bitcoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.bitcoin/bitcoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.bitcoin/bitcoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.bitcoin/bitcoin.conf
echo 'rpcport=8332' >> ~/.bitcoin/bitcoin.conf
echo 'server=1' >> ~/.bitcoin/bitcoin.conf
echo 'maxconnections=10' >> ~/.bitcoin/bitcoin.conf Run & check RPC
bitcoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:8332/ | python -mjson.toolStop
bitcoin-cli stopInstall
wget https://github.com/bitcoinclassic/bitcoinclassic/releases/download/v1.3.3uahf/bitcoin-1.3.3-linux64.tar.gz
tar xfz bitcoin-1.3.3-linux64.tar.gz
mv bitcoin-1.3.3 Bitcoinclassic
rm bitcoin-1.3.3-linux64.tar.gz
cd Bitcoinclassic/bin
rename 's/bitcoin/bitcoinclassic/' *
sudo cp * /usr/binConfigure
mkdir .bitcoinclassic # Run only once, before first launch
echo 'rpcuser=USERNAME' > ~/.bitcoinclassic/bitcoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.bitcoinclassic/bitcoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.bitcoinclassic/bitcoin.conf
echo 'rpcport=8432' >> ~/.bitcoinclassic/bitcoin.conf
echo 'server=1' >> ~/.bitcoinclassic/bitcoin.conf
echo 'bind=0.0.0.0:9222' >> ~/.bitcoinclassic/bitcoin.conf
echo 'maxconnections=10' >> ~/.bitcoinclassic/bitcoin.conf Run & check
bitcoinclassicd -daemon -datadir=.bitcoinclassic/
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:8432/ | python -mjson.toolStop
bitcoinabc-cli stopOffical guide, by ethereum.org - link
Install
sudo apt-get install software-properties-common
sudo add-apt-repository -y ppa:ethereum/ethereum
sudo apt-get update
sudo apt-get install ethereumConfigure
# No need to config anythingRun
geth --rpc --rpcaddr "127.0.0.1" --rpcport 8532 --rpcapi "admin,debug,miner,shh,txpool,personal,eth,net,web3" consoleStop
# Just type 'exit' in the Geth consoleInstall
wget https://github.com/ethereumproject/go-ethereum/releases/download/v3.5.86/geth-classic-linux-v3.5.0.86-db60074.tar.gz
tar xzf geth-classic-linux-v3.5.0.86-db60074.tar.gz
rm geth-classic-linux-v3.5.0.86-db60074.tar.gz
mv geth geth-classic
sudo cp geth-classic /usr/bin # Make geth-classic systemwide availableConfigure
# No need to config anythingRun
geth-classic --rpc --rpcaddr "127.0.0.1" --rpcapi "admin,debug,miner,shh,txpool,personal,eth,net,web3" --rpcport 8632 --port 30304 console # Running on non-typical ports (30304 and 8632) for the purpose of collision avoidane with gethStop
# Just type 'exit' in the Geth-classic consoleInstall
wget https://download.litecoin.org/litecoin-0.14.2/linux/litecoin-0.14.2-x86_64-linux-gnu.tar.gz
tar xzf litecoin-0.14.2-x86_64-linux-gnu.tar.gz
rm litecoin-0.14.2-x86_64-linux-gnu.tar.gz
mv litecoin-0.14.2/ Litecoin
cd Litecoin/bin/
sudo cp * /usr/bin # Make binaries systemwide availableConfigure
litecoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.litecoin/litecoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.litecoin/litecoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.litecoin/litecoin.conf
echo 'rpcport=8732' >> ~/.litecoin/litecoin.conf
echo 'server=1' >> ~/.litecoin/litecoin.conf
echo 'maxconnections=10' >> ~/.litecoin/litecoin.conf Run & check
litecoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:8732/ | python -mjson.toolStop
litecoin-cli stopInstall
wget https://github.com/dogecoin/dogecoin/releases/download/v1.10.0/dogecoin-1.10.0-linux64.tar.gz
tar xzf dogecoin-1.10.0-linux64.tar.gz
rm dogecoin-1.10.0-linux64.tar.gz
mv dogecoin-1.10.0/ Dogecoin
cd Dogecoin/bin/
sudo cp * /usr/binConfigure
dogecoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.dogecoin/dogecoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.dogecoin/dogecoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.dogecoin/dogecoin.conf
echo 'rpcport=8832' >> ~/.dogecoin/dogecoin.conf
echo 'server=1' >> ~/.dogecoin/dogecoin.conf
echo 'maxconnections=10' >> ~/.dogecoin/dogecoin.conf Run & check
dogecoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:8832/ | python -mjson.toolStop
dogecoin-cli stopInstall
wget https://www.dash.org/binaries/dashcore-0.12.1.5-linux64.tar.gz # https://www.dash.org/wallets/#linux
tar xfz dashcore-0.12.1.5-linux64.tar.gz
rm dashcore-0.12.1.5-linux64.tar.gz
mv dashcore-0.12.1/ Dash
cd Dash/bin/
sudo cp * /usr/bin # Make binaries systemwide availableConfigure
echo 'rpcuser=USERNAME' > ~/.dashcore/dash.conf
echo 'rpcpassword=PASSWORD' >> ~/.dashcore/dash.conf
echo 'rpcbind=127.0.0.1' >> ~/.dashcore/dash.conf
echo 'rpcport=8932' >> ~/.dashcore/dash.conf
echo 'server=1' >> ~/.dashcore/dash.conf
echo 'maxconnections=10' >> ~/.dashcore/dash.conf Run & check
dashd -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:8932/ | python -mjson.toolStop
dash-cli stopInstall
sudo apt-get install apt-transport-https
wget -qO - https://apt.z.cash/zcash.asc | sudo apt-key add -
echo "deb [arch=amd64] https://apt.z.cash/ jessie main" | sudo tee /etc/apt/sources.list.d/zcash.list
sudo apt-get update
sudo apt-get install zcashConfigure
zcashd # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.zcash/zcash.conf
echo 'rpcpassword=PASSWORD' >> ~/.zcash/zcash.conf
echo 'rpcbind=127.0.0.1' >> ~/.zcash/zcash.conf
echo 'rpcport=9032' >> ~/.zcash/zcash.conf
echo 'server=1' >> ~/.zcash/zcash.conf
echo 'maxconnections=10' >> ~/.zcash/zcash.conf Run & check
zcash-fetch-params # Run this code before first launch
zcashd -rescan -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:9032/ | python -mjson.toolStop
zcash-cli stopInstall
wget https://github.com/vertcoin/vertcoin/releases/download/v0.11.1.0/vertcoin-v0.11.1.0-linux-64bit.zip
unzip vertcoin-v0.11.1.0-linux-64bit.zip
rm vertcoin-v0.11.1.0-linux-64bit.zip
mkdir Vertcoin
mv vertcoin* Vertcoin/
cd Vertcoin/
sudo cp * /usr/binConfigure
vertcoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.vertcoin/vertcoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.vertcoin/vertcoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.vertcoin/vertcoin.conf
echo 'rpcport=9832' >> ~/.vertcoin/vertcoin.conf
echo 'server=1' >> ~/.vertcoin/vertcoin.conf
echo 'maxconnections=10' >> ~/.vertcoin/vertcoin.conf Run & check
vertcoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:9832/ | python -mjson.toolStop
ppcoind stopInstall
sudo apt-get install curl libcurl3
wget http://www.navcoin.org/files/navcoin-4.0.4/navcoin-4.0.4-x86_64-linux-gnu.tar.gz
tar xzf navcoin-4.0.4-x86_64-linux-gnu.tar.gz
rm navcoin-4.0.4-x86_64-linux-gnu.tar.gz
mv navcoin-4.0.4 Navcoin
cd Navcoin/bin/
sudo cp * /usr/binConfigure
navcoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.navcoin4/navcoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.navcoin4/navcoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.navcoin4/navcoin.conf
echo 'rpcport=9532' >> ~/.navcoin4/navcoin.conf
echo 'server=1' >> ~/.navcoin4/navcoin.conf
echo 'maxconnections=10' >> ~/.navcoin4/navcoin.conf Run & check
navcoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:9532/ | python -mjson.toolStop
namecoind stopInstall
# Emercoin releases alavilable on Sourgeforge, so you should download it manually :(
# Link - https://sourceforge.net/projects/emercoin/?source=typ_redirect
scp emercoin-0.6.2-linux64.tar.gz username@ip:~ # Use scp if necessary, to upload archive
tar xzf emercoin-0.6.2-linux64.tar.gz
mv emercoin-0.6.2/ Emercoin
rm emercoin-0.6.2-linux64.tar.gz
cd Emercoin/bin/
sudo cp * /usr/binConfigure
emercoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.emercoin/emercoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.emercoin/emercoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.emercoin/emercoin.conf
echo 'rpcport=9332' >> ~/.emercoin/emercoin.conf
echo 'server=1' >> ~/.emercoin/emercoin.conf
echo 'maxconnections=10' >> ~/.emercoin/emercoin.conf Run & check
emercoind -daemon
curl --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://USERNAME:[email protected]:9332/ | python -mjson.toolStop
emercoin-cli stopInstall
wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.0.0/reddcoin-2.0.0.0-linux.tar.gz
tar xzf reddcoin-2.0.0.0-linux.tar.gz
rm reddcoin-2.0.0.0-linux.tar.gz
mv reddcoin-2.0.0.0-linux Reddcoin
cd Reddcoin/bin/64/
sudo cp * /usr/bin # Make binaries systemwide availableConfigure
reddcoind # Press CTRL+C right after launch
# All you need right now - is to init datadir
echo 'rpcuser=USERNAME' > ~/.reddcoin/reddcoin.conf
echo 'rpcpassword=PASSWORD' >> ~/.reddcoin/reddcoin.conf
echo 'rpcbind=127.0.0.1' >> ~/.reddcoin/reddcoin.conf
echo 'rpcport=9432' >> ~/.reddcoin/reddcoin.conf
echo 'server=1' >> ~/.reddcoin/reddcoin.conf
echo 'maxconnections=10' >> ~/.reddcoin/reddcoin.conf Run
reddcoind -daemonStop
reddcoin-cli stopsudo apt-get update
sudo apt-get install virtualenv git python-dev python3 python3-pip git
git clone https://github.com/Revain/Valets
cd Valets/
virtualenv --python python3 --no-site-packages venv
source venv/bin/activate
pip install -r requirements.txt@reboot bitcoind -daemon
@reboot bitcoinclassicd -daemon -datadir=.bitcoinclassic/
@reboot litecoind -daemon
@reboot dogecoind -daemon
@reboot dashd -daemon
@reboot zcashd -daemon
@reboot reddcoind -daemon
@reboot emercoind -daemon
@reboot navcoind -daemon
@reboot vertcoind -daemon
@reboot
@reboot$ python Valets/ -c BTC 1000 -c LTC 1000 -c ETH 1000 -c ETC 2000
# Check every 12 currencies
$ python Valets/ -c BTC 1 -c LTC 1 -c DASH 1 -c ZEC 1 -c NAV 1 -c PCC 1 -c BCH 1 -c DOGE 1 -c EMC 1 -c RDD 1 -c ETH 1 -c ETC 1
# Generate 100 wallets per currency
$ python Valets/ -c BTC 100 -c LTC 100 -c DASH 100 -c ZEC 100 -c NAV 100 -c PCC 100 -c BCH 100 -c DOGE 100 -c EMC 100 -c RDD 100 -c ETH 100 -c ETC 100