Skip to content

Security: SymbioticLab/Sol

Security

docs/security.md

layout displayTitle title
global
Spark Security
Security
  • This will become a table of contents (this text will be scraped). {:toc}

Spark RPC

Authentication

Spark currently supports authentication for RPC channels using a shared secret. Authentication can be turned on by setting the spark.authenticate configuration parameter.

The exact mechanism used to generate and distribute the shared secret is deployment-specific.

For Spark on YARN and local deployments, Spark will automatically handle generating and distributing the shared secret. Each application will use a unique shared secret. In the case of YARN, this feature relies on YARN RPC encryption being enabled for the distribution of secrets to be secure.

For other resource managers, spark.authenticate.secret must be configured on each of the nodes. This secret will be shared by all the daemons and applications, so this deployment configuration is not as secure as the above, especially when considering multi-tenant clusters.

Property NameDefaultMeaning
spark.authenticate false Whether Spark authenticates its internal connections.
spark.authenticate.secret None The secret key used authentication. See above for when this configuration should be set.

Encryption

Spark supports AES-based encryption for RPC connections. For encryption to be enabled, RPC authentication must also be enabled and properly configured. AES encryption uses the Apache Commons Crypto library, and Spark's configuration system allows access to that library's configuration for advanced users.

There is also support for SASL-based encryption, although it should be considered deprecated. It is still required when talking to shuffle services from Spark versions older than 2.2.0.

The following table describes the different options available for configuring this feature.

Property NameDefaultMeaning
spark.network.crypto.enabled false Enable AES-based RPC encryption, including the new authentication protocol added in 2.2.0.
spark.network.crypto.keyLength 128 The length in bits of the encryption key to generate. Valid values are 128, 192 and 256.
spark.network.crypto.keyFactoryAlgorithm PBKDF2WithHmacSHA1 The key factory algorithm to use when generating encryption keys. Should be one of the algorithms supported by the javax.crypto.SecretKeyFactory class in the JRE being used.
spark.network.crypto.config.* None Configuration values for the commons-crypto library, such as which cipher implementations to use. The config name should be the name of commons-crypto configuration without the commons.crypto prefix.
spark.network.crypto.saslFallback true Whether to fall back to SASL authentication if authentication fails using Spark's internal mechanism. This is useful when the application is connecting to old shuffle services that do not support the internal Spark authentication protocol. On the shuffle service side, disabling this feature will block older clients from authenticating.
spark.authenticate.enableSaslEncryption false Enable SASL-based encrypted communication.
spark.network.sasl.serverAlwaysEncrypt false Disable unencrypted connections for ports using SASL authentication. This will deny connections from clients that have authentication enabled, but do not request SASL-based encryption.

Local Storage Encryption

Spark supports encrypting temporary data written to local disks. This covers shuffle files, shuffle spills and data blocks stored on disk (for both caching and broadcast variables). It does not cover encrypting output data generated by applications with APIs such as saveAsHadoopFile or saveAsTable.

The following settings cover enabling encryption for data written to disk:

Property NameDefaultMeaning
spark.io.encryption.enabled false Enable local disk I/O encryption. Currently supported by all modes except Mesos. It's strongly recommended that RPC encryption be enabled when using this feature.
spark.io.encryption.keySizeBits 128 IO encryption key size in bits. Supported values are 128, 192 and 256.
spark.io.encryption.keygen.algorithm HmacSHA1 The algorithm to use when generating the IO encryption key. The supported algorithms are described in the KeyGenerator section of the Java Cryptography Architecture Standard Algorithm Name Documentation.
spark.io.encryption.commons.config.* None Configuration values for the commons-crypto library, such as which cipher implementations to use. The config name should be the name of commons-crypto configuration without the commons.crypto prefix.

Web UI

Authentication and Authorization

Enabling authentication for the Web UIs is done using javax servlet filters. You will need a filter that implements the authentication method you want to deploy. Spark does not provide any built-in authentication filters.

Spark also supports access control to the UI when an authentication filter is present. Each application can be configured with its own separate access control lists (ACLs). Spark differentiates between "view" permissions (who is allowed to see the application's UI), and "modify" permissions (who can do things like kill jobs in a running application).

ACLs can be configured for either users or groups. Configuration entries accept comma-separated lists as input, meaning multiple users or groups can be given the desired privileges. This can be used if you run on a shared cluster and have a set of administrators or developers who need to monitor applications they may not have started themselves. A wildcard (*) added to specific ACL means that all users will have the respective pivilege. By default, only the user submitting the application is added to the ACLs.

Group membership is established by using a configurable group mapping provider. The mapper is configured using the spark.user.groups.mapping config option, described in the table below.

The following options control the authentication of Web UIs:

Property NameDefaultMeaning
spark.ui.filters None See the Spark UI configuration for how to configure filters.
spark.acls.enable false Whether UI ACLs should be enabled. If enabled, this checks to see if the user has access permissions to view or modify the application. Note this requires the user to be authenticated, so if no authentication filter is installed, this option does not do anything.
spark.admin.acls None Comma-separated list of users that have view and modify access to the Spark application.
spark.admin.acls.groups None Comma-separated list of groups that have view and modify access to the Spark application.
spark.modify.acls None Comma-separated list of users that have modify access to the Spark application.
spark.modify.acls.groups None Comma-separated list of groups that have modify access to the Spark application.
spark.ui.view.acls None Comma-separated list of users that have view access to the Spark application.
spark.ui.view.acls.groups None Comma-separated list of groups that have view access to the Spark application.
spark.user.groups.mapping org.apache.spark.security.ShellBasedGroupsMappingProvider The list of groups for a user is determined by a group mapping service defined by the trait org.apache.spark.security.GroupMappingServiceProvider, which can be configured by this property.
<br />By default, a Unix shell-based implementation is used, which collects this information
from the host OS.

<br /><em>Note:</em> This implementation supports only Unix/Linux-based environments.
Windows environment is currently <b>not</b> supported. However, a new platform/protocol can
be supported by implementing the trait mentioned above.

On YARN, the view and modify ACLs are provided to the YARN service when submitting applications, and control who has the respective privileges via YARN interfaces.

Spark History Server ACLs

Authentication for the SHS Web UI is enabled the same way as for regular applications, using servlet filters.

To enable authorization in the SHS, a few extra options are used:

Property NameDefaultMeaning
spark.history.ui.acls.enable false Specifies whether ACLs should be checked to authorize users viewing the applications in the history server. If enabled, access control checks are performed regardless of what the individual applications had set for spark.ui.acls.enable. The application owner will always have authorization to view their own application and any users specified via spark.ui.view.acls and groups specified via spark.ui.view.acls.groups when the application was run will also have authorization to view that application. If disabled, no access control checks are made for any application UIs available through the history server.
spark.history.ui.admin.acls None Comma separated list of users that have view access to all the Spark applications in history server.
spark.history.ui.admin.acls.groups None Comma separated list of groups that have view access to all the Spark applications in history server.

The SHS uses the same options to configure the group mapping provider as regular applications. In this case, the group mapping provider will apply to all UIs server by the SHS, and individual application configurations will be ignored.

SSL Configuration

Configuration for SSL is organized hierarchically. The user can configure the default SSL settings which will be used for all the supported communication protocols unless they are overwritten by protocol-specific settings. This way the user can easily provide the common settings for all the protocols without disabling the ability to configure each one individually. The following table describes the the SSL configuration namespaces:

Config Namespace Component
spark.ssl The default SSL configuration. These values will apply to all namespaces below, unless explicitly overridden at the namespace level.
spark.ssl.ui Spark application Web UI
spark.ssl.standalone Standalone Master / Worker Web UI
spark.ssl.historyServer History Server Web UI

The full breakdown of available SSL options can be found below. The ${ns} placeholder should be replaced with one of the above namespaces.

Property NameDefaultMeaning
${ns}.enabled false Enables SSL. When enabled, ${ns}.ssl.protocol is required.
${ns}.port None The port where the SSL service will listen on.
  <br />The port must be defined within a specific namespace configuration. The default
  namespace is ignored when reading this configuration.

  <br />When not set, the SSL port will be derived from the non-SSL port for the
  same service. A value of "0" will make the service bind to an ephemeral port.
</td>
${ns}.enabledAlgorithms None A comma-separated list of ciphers. The specified ciphers must be supported by JVM.
  <br />The reference list of protocols can be found in the "JSSE Cipher Suite Names" section
  of the Java security guide. The list for Java 8 can be found at
  <a href="https://docs.oracle.com/javase/8/docs/technotes/guides/security/StandardNames.html#ciphersuites">this</a>
  page.

  <br />Note: If not set, the default cipher suite for the JRE will be used.
</td>
${ns}.keyPassword None The password to the private key in the key store.
${ns}.keyStore None Path to the key store file. The path can be absolute or relative to the directory in which the process is started.
${ns}.keyStorePassword None Password to the key store.
${ns}.keyStoreType JKS The type of the key store.
${ns}.protocol None TLS protocol to use. The protocol must be supported by JVM.
  <br />The reference list of protocols can be found in the "Additional JSSE Standard Names"
  section of the Java security guide. For Java 8, the list can be found at
  <a href="https://docs.oracle.com/javase/8/docs/technotes/guides/security/StandardNames.html#jssenames">this</a>
  page.
</td>
${ns}.needClientAuth false Whether to require client authentication.
${ns}.trustStore None Path to the trust store file. The path can be absolute or relative to the directory in which the process is started.
${ns}.trustStorePassword None Password for the trust store.
${ns}.trustStoreType JKS The type of the trust store.

Preparing the key stores

Key stores can be generated by keytool program. The reference documentation for this tool for Java 8 is here. The most basic steps to configure the key stores and the trust store for a Spark Standalone deployment mode is as follows:

  • Generate a key pair for each node
  • Export the public key of the key pair to a file on each node
  • Import all exported public keys into a single trust store
  • Distribute the trust store to the cluster nodes

YARN mode

To provide a local trust store or key store file to drivers running in cluster mode, they can be distributed with the application using the --files command line argument (or the equivalent spark.files configuration). The files will be placed on the driver's working directory, so the TLS configuration should just reference the file name with no absolute path.

Distributing local key stores this way may require the files to be staged in HDFS (or other similar distributed file system used by the cluster), so it's recommended that the undelying file system be configured with security in mind (e.g. by enabling authentication and wire encryption).

Standalone mode

The user needs to provide key stores and configuration options for master and workers. They have to be set by attaching appropriate Java system properties in SPARK_MASTER_OPTS and in SPARK_WORKER_OPTS environment variables, or just in SPARK_DAEMON_JAVA_OPTS.

The user may allow the executors to use the SSL settings inherited from the worker process. That can be accomplished by setting spark.ssl.useNodeLocalConf to true. In that case, the settings provided by the user on the client side are not used.

Mesos mode

Mesos 1.3.0 and newer supports Secrets primitives as both file-based and environment based secrets. Spark allows the specification of file-based and environment variable based secrets with spark.mesos.driver.secret.filenames and spark.mesos.driver.secret.envkeys, respectively.

Depending on the secret store backend secrets can be passed by reference or by value with the spark.mesos.driver.secret.names and spark.mesos.driver.secret.values configuration properties, respectively.

Reference type secrets are served by the secret store and referred to by name, for example /mysecret. Value type secrets are passed on the command line and translated into their appropriate files or environment variables.

HTTP Security Headers

Apache Spark can be configured to include HTTP headers to aid in preventing Cross Site Scripting (XSS), Cross-Frame Scripting (XFS), MIME-Sniffing, and also to enforce HTTP Strict Transport Security.

Property NameDefaultMeaning
spark.ui.xXssProtection 1; mode=block Value for HTTP X-XSS-Protection response header. You can choose appropriate value from below:
  • 0 (Disables XSS filtering)
  • 1 (Enables XSS filtering. If a cross-site scripting attack is detected, the browser will sanitize the page.)
  • 1; mode=block (Enables XSS filtering. The browser will prevent rendering of the page if an attack is detected.)
spark.ui.xContentTypeOptions.enabled true When enabled, X-Content-Type-Options HTTP response header will be set to "nosniff".
spark.ui.strictTransportSecurity None Value for HTTP Strict Transport Security (HSTS) Response Header. You can choose appropriate value from below and set expire-time accordingly. This option is only used when SSL/TLS is enabled.
  • max-age=<expire-time>
  • max-age=<expire-time>; includeSubDomains
  • max-age=<expire-time>; preload

Configuring Ports for Network Security

Spark makes heavy use of the network, and some environments have strict requirements for using tight firewall settings. Below are the primary ports that Spark uses for its communication and how to configure those ports.

Standalone mode only

FromToDefault PortPurposeConfiguration SettingNotes
Browser Standalone Master 8080 Web UI spark.master.ui.port /
SPARK_MASTER_WEBUI_PORT
Jetty-based. Standalone mode only.
Browser Standalone Worker 8081 Web UI spark.worker.ui.port /
SPARK_WORKER_WEBUI_PORT
Jetty-based. Standalone mode only.
Driver /
Standalone Worker
Standalone Master 7077 Submit job to cluster /
Join cluster
SPARK_MASTER_PORT Set to "0" to choose a port randomly. Standalone mode only.
Standalone Master Standalone Worker (random) Schedule executors SPARK_WORKER_PORT Set to "0" to choose a port randomly. Standalone mode only.

All cluster managers

FromToDefault PortPurposeConfiguration SettingNotes
Browser Application 4040 Web UI spark.ui.port Jetty-based
Browser History Server 18080 Web UI spark.history.ui.port Jetty-based
Executor /
Standalone Master
Driver (random) Connect to application /
Notify executor state changes
spark.driver.port Set to "0" to choose a port randomly.
Executor / Driver Executor / Driver (random) Block Manager port spark.blockManager.port Raw socket via ServerSocketChannel

Kerberos

Spark supports submitting applications in environments that use Kerberos for authentication. In most cases, Spark relies on the credentials of the current logged in user when authenticating to Kerberos-aware services. Such credentials can be obtained by logging in to the configured KDC with tools like kinit.

When talking to Hadoop-based services, Spark needs to obtain delegation tokens so that non-local processes can authenticate. Spark ships with support for HDFS and other Hadoop file systems, Hive and HBase.

When using a Hadoop filesystem (such HDFS or WebHDFS), Spark will acquire the relevant tokens for the service hosting the user's home directory.

An HBase token will be obtained if HBase is in the application's classpath, and the HBase configuration has Kerberos authentication turned (hbase.security.authentication=kerberos).

Similarly, a Hive token will be obtained if Hive is in the classpath, and the configuration includes URIs for remote metastore services (hive.metastore.uris is not empty).

Delegation token support is currently only supported in YARN and Mesos modes. Consult the deployment-specific page for more information.

The following options provides finer-grained control for this feature:

Property NameDefaultMeaning
spark.security.credentials.${service}.enabled true Controls whether to obtain credentials for services when security is enabled. By default, credentials for all supported services are retrieved when those services are configured, but it's possible to disable that behavior if it somehow conflicts with the application being run.

Long-Running Applications

Long-running applications may run into issues if their run time exceeds the maximum delegation token lifetime configured in services it needs to access.

Spark supports automatically creating new tokens for these applications when running in YARN mode. Kerberos credentials need to be provided to the Spark application via the spark-submit command, using the --principal and --keytab parameters.

The provided keytab will be copied over to the machine running the Application Master via the Hadoop Distributed Cache. For this reason, it's strongly recommended that both YARN and HDFS be secured with encryption, at least.

The Kerberos login will be periodically renewed using the provided credentials, and new delegation tokens for supported will be created.

Event Logging

If your applications are using event logging, the directory where the event logs go (spark.eventLog.dir) should be manually created with proper permissions. To secure the log files, the directory permissions should be set to drwxrwxrwxt. The owner and group of the directory should correspond to the super user who is running the Spark History Server.

This will allow all users to write to the directory but will prevent unprivileged users from reading, removing or renaming a file unless they own it. The event log files will be created by Spark with permissions such that only the user and group have read and write access.

There aren’t any published security advisories