Skip to content

[MARLIN-E3S1PROFORK-BYTT-v020]
Compare
Choose a tag to compare
@ThomasToka ThomasToka released this 26 Nov 13:55
· 74 commits to Firmware-Binaries since this release
MARLIN-E3S1PROFORK-BYTT-v020
eff1dbd
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Dear Ender 3 S1 PRO/PLUS user,

this is the next release of MARLIN-E3S1PROFORK-BYTT v020.

This release i call "The instructions update".

In this release the following additions/changes have been made:

  • added hints on cr-touch measuring site
  • added hints on manual tramming site
  • changed behavior of the home button on cr-touch measuring site
  • changed behavior of the home button on the manual tramming site
  • changed linear advance to 3 digits.
  • changed default linear advance K value to 0.035
  • added a guard to not overlow the display on loading a too big gcode preview image
  • increased gcode preview image size to 24KB by moving it from 0xB000 to 0xA000

Many new features were added during the beta and release candidate phase. Among them are for example:

  • autopid for hotend and hotbed
  • reworked autoleveling site with mesh visualisation
  • added cr-touch measurement on the aux.lvl page. tap on the CR-Touch
  • gcode-preview for cura, prusa-slicer, orca-slicer, super-slicer with own scripts and instructions
  • dynamic probing margin for abl builds with a range of 25-100mm for x and 42-100 with stock or 10-100 for 0 y offset users
  • sound on/off toggle
  • selected printfile scrolling
  • display brightness manipulation
  • linear advance settings support over touch display
  • input shaping hz and zeta manipulation over touch display
  • hotend offset setting over touch display
  • home offset setting over touch display
  • more tramming points on the tramming site
  • 0.01mm and 0.05 babystepping on the tramming site
  • 0.01 mm babystepping during print
  • multiple M600 are possible
  • material change on pause or filament runout. this means you can heatup hotend and bed on the pause site
  • laser feature activated (untested and based on the released creality code)
  • folders and subfolders support (folders up to 8 characters in name work, more characters folders are shown but not enterable). print button acts als "cdup" button if you are in a folder or subfolder to go back upwards.
  • backward compatibility. this means you can use the mainboard firmware without my screen firmware. naturally you then have only the stock features with my fixes, but not the new visual sites, as they are in the screen firmware.

Known bugs/behavior so far:
Autopid:

  • on dwin displays the autopid curve is visually going from left to right. but the graph goes to the left up. same code, displays behave different. to be fixed if possible. result and run is technically perfect.
  • shown decimals is limited for some PID fields to 1 decimal. saved are the correct values. ex. 100.1 is shown but 100.08 is messured, saved and used. so its just a visual display bug.

Autoleveling:

  • autoleveling starts without waiting for heatup of hotend and hotbed. start heatup. you can now set it directly on the autoleveling site. be patient. wait till it heated up. then press start.

Sound off/on toggle:

  • sound off/on toggle works on all displays after a one time creality 28 screen firmware update for the dacais. private and firmware.zlib need to be installed for this. so this longtime bug does not exist anymore.

Please read the installation.txt.

I wish you good luck with the installation process and with the new features.

You can donate to my github sponsors account:

https://github.com/sponsors/ThomasToka

or to my patreon account:

https://www.patreon.com/ThomasToka

or directly to my paypal account:

https://www.paypal.me/thomastoka

Thomas Toka - Core developer MARLIN-E3S1PROFORK-BYTT

Assets 18
Loading