Issues

• My awesome journey ends here

  Traumflug/Teacup_Firmware#338 · Filter by author Traumflug opened on Aug 20, 2023
  2

• G0 is always at max X speed!

  Traumflug/Teacup_Firmware#337 · Filter by author arcimede opened on Jul 16, 2023
  1

• Communication timeout

  Traumflug/Teacup_Firmware#336 · Filter by author ahmetonat opened on Jun 25, 2023
  3

• Infinite connecting to slicer when i2c SSD1306 is enabled

  Traumflug/Teacup_Firmware#333 · Filter by author malketiya opened on May 16, 2023

• ===== RESTART

  Traumflug/Teacup_Firmware#332 · Filter by author marketstrader opened on Mar 25, 2023

• PWM M106 command extra pulse at value = 0 (0%) and solution

  Traumflug/Teacup_Firmware#331 · Filter by author papilinou opened on Mar 8, 2022

• Build broken on Fedora 34

  Traumflug/Teacup_Firmware#330 · Filter by author dwillmore opened on Mar 1, 2022
  4

• Config tool doesn't load board.cnc-shield-v3-nucleo.h

  Traumflug/Teacup_Firmware#329 · Filter by author gagauz opened on Mar 27, 2021
  1

• configtool colors all wrong in Ubuntu

  Traumflug/Teacup_Firmware#328 · Filter by author phord opened on Jul 31, 2020
  3

• Teacup does not start, if a defined 4-bit-bus LCD is not conected

  Traumflug/Teacup_Firmware#326 · Filter by author arcimede opened on Mar 31, 2020

• Teacup not setting Y-MAX correctly after homing against the Y-Max-Switch

  Traumflug/Teacup_Firmware#325 · Filter by author arcimede opened on Mar 17, 2020
  13

• Heat bed using cnc shield

  Traumflug/Teacup_Firmware#323 · Filter by author amit-nath30 opened on Mar 5, 2020

• How to add SD card reader to the CNC shield V3

  Traumflug/Teacup_Firmware#321 · Filter by author Pablotir opened on Sep 27, 2019

• Long distance issue

  Traumflug/Teacup_Firmware#319 · Filter by author FelipeDelgadoR opened on Jun 27, 2019
  8

• ZProbing implementation

  Traumflug/Teacup_Firmware#318 · Filter by author trustfm opened on Jan 9, 2019
  7

• Can't save printer with Configtool

  Traumflug/Teacup_Firmware#314 · Filter by author shakenov-chinga opened on Nov 6, 2018
  9

• Atmega128 Teacup

  Traumflug/Teacup_Firmware#312 · Filter by author shakenov-chinga opened on Nov 5, 2018
  5

• Any pointers on how to attach a servo?

  Traumflug/Teacup_Firmware#311 · Filter by author thomaskilian opened on Nov 4, 2018
  16

• How to change the serial port for melzi board

  Traumflug/Teacup_Firmware#310 · Filter by author Laczen opened on Oct 22, 2018
  7

• Wrong codes > 255 reported wrongly

  Traumflug/Teacup_Firmware#308 · Filter by author thomaskilian opened on Oct 18, 2018
  3

• Thermistor table generated wrongly

  Traumflug/Teacup_Firmware#307 · Filter by author thomaskilian opened on Oct 4, 2018
  5

• Different PID values for heater/bed

  Traumflug/Teacup_Firmware#306 · Filter by author thomaskilian opened on Oct 2, 2018
  1

• No code M117

  Traumflug/Teacup_Firmware#305 · Filter by author thomaskilian opened on Oct 1, 2018
  9

• Double Z-Axis motors

  Traumflug/Teacup_Firmware#304 · Filter by author thomaskilian opened on Sep 25, 2018
  3

• Disabling FAST_PWM on AVR affects only Timer0

  Traumflug/Teacup_Firmware#302 · Filter by author phord opened on Aug 11, 2018